diff options
Diffstat (limited to 'drivers/thermal/qoriq_thermal.c')
| -rw-r--r-- | drivers/thermal/qoriq_thermal.c | 26 |
1 files changed, 24 insertions, 2 deletions
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c index 028a6bbf75dc..73049f9bea25 100644 --- a/drivers/thermal/qoriq_thermal.c +++ b/drivers/thermal/qoriq_thermal.c @@ -11,6 +11,7 @@ #include <linux/regmap.h> #include <linux/sizes.h> #include <linux/thermal.h> +#include <linux/units.h> #include "thermal_core.h" #include "thermal_hwmon.h" @@ -23,6 +24,7 @@ #define TMTMIR_DEFAULT 0x0000000f #define TIER_DISABLE 0x0 #define TEUMR0_V2 0x51009c00 +#define TMSARA_V2 0xe #define TMU_VER1 0x1 #define TMU_VER2 0x2 @@ -50,6 +52,9 @@ * Site Register */ #define TRITSR_V BIT(31) +#define REGS_V2_TMSAR(n) (0x304 + 16 * (n)) /* TMU monitoring + * site adjustment register + */ #define REGS_TTRnCR(n) (0xf10 + 4 * (n)) /* Temperature Range n * Control Register */ @@ -85,12 +90,21 @@ static int tmu_get_temp(void *p, int *temp) /* * REGS_TRITSR(id) has the following layout: * + * For TMU Rev1: * 31 ... 7 6 5 4 3 2 1 0 * V TEMP * * Where V bit signifies if the measurement is ready and is * within sensor range. TEMP is an 8 bit value representing - * temperature in C. + * temperature in Celsius. + + * For TMU Rev2: + * 31 ... 8 7 6 5 4 3 2 1 0 + * V TEMP + * + * Where V bit signifies if the measurement is ready and is + * within sensor range. TEMP is an 9 bit value representing + * temperature in KelVin. */ if (regmap_read_poll_timeout(qdata->regmap, REGS_TRITSR(qsensor->id), @@ -100,7 +114,10 @@ static int tmu_get_temp(void *p, int *temp) 10 * USEC_PER_MSEC)) return -ENODATA; - *temp = (val & 0xff) * 1000; + if (qdata->ver == TMU_VER1) + *temp = (val & GENMASK(7, 0)) * MILLIDEGREE_PER_DEGREE; + else + *temp = kelvin_to_millicelsius(val & GENMASK(8, 0)); return 0; } @@ -192,6 +209,8 @@ static int qoriq_tmu_calibration(struct device *dev, static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) { + int i; + /* Disable interrupt, using polling instead */ regmap_write(data->regmap, REGS_TIER, TIER_DISABLE); @@ -202,6 +221,8 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) } else { regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT); regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2); + for (i = 0; i < SITES_MAX; i++) + regmap_write(data->regmap, REGS_V2_TMSAR(i), TMSARA_V2); } /* Disable monitoring */ @@ -212,6 +233,7 @@ static const struct regmap_range qoriq_yes_ranges[] = { regmap_reg_range(REGS_TMR, REGS_TSCFGR), regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)), regmap_reg_range(REGS_V2_TEUMR(0), REGS_V2_TEUMR(2)), + regmap_reg_range(REGS_V2_TMSAR(0), REGS_V2_TMSAR(15)), regmap_reg_range(REGS_IPBRR(0), REGS_IPBRR(1)), /* Read only registers below */ regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)), |