4 files changed, 24 insertions, 18 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index cfbd2de0ca6e..3f56dbc9432b 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -23,6 +23,7 @@
 #include <linux/sysrq.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/tty.h>
 #include <linux/ratelimit.h>
 #include <linux/tty_flip.h>
@@ -559,6 +560,9 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 
 		up->port.dev = dev;
 
+		if (uart_console_enabled(&up->port))
+			pm_runtime_get_sync(up->port.dev);
+
 		serial8250_apply_quirks(up);
 		uart_add_one_port(drv, &up->port);
 	}
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 7133fceed35e..a8dba4a0a8fb 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -106,10 +106,10 @@ int serial8250_tx_dma(struct uart_8250_port *p)
 				   UART_XMIT_SIZE, DMA_TO_DEVICE);
 
 	dma_async_issue_pending(dma->txchan);
-	if (dma->tx_err) {
+	serial8250_clear_THRI(p);
+	if (dma->tx_err)
 		dma->tx_err = 0;
-		serial8250_clear_THRI(p);
-	}
+
 	return 0;
 err:
 	dma->tx_err = 1;
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f57bbd32ef11..bb6aca07ab56 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -47,7 +47,7 @@
 #define RZN1_UART_xDMACR_DMA_EN		BIT(0)
 #define RZN1_UART_xDMACR_1_WORD_BURST	(0 << 1)
 #define RZN1_UART_xDMACR_4_WORD_BURST	(1 << 1)
-#define RZN1_UART_xDMACR_8_WORD_BURST	(3 << 1)
+#define RZN1_UART_xDMACR_8_WORD_BURST	(2 << 1)
 #define RZN1_UART_xDMACR_BLK_SZ(x)	((x) << 3)
 
 /* Quirks */
@@ -773,18 +773,18 @@ static const struct of_device_id dw8250_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw8250_of_match);
 
 static const struct acpi_device_id dw8250_acpi_match[] = {
-	{ "INT33C4", 0 },
-	{ "INT33C5", 0 },
-	{ "INT3434", 0 },
-	{ "INT3435", 0 },
-	{ "80860F0A", 0 },
-	{ "8086228A", 0 },
-	{ "APMC0D08", 0},
-	{ "AMD0020", 0 },
-	{ "AMDI0020", 0 },
-	{ "AMDI0022", 0 },
-	{ "BRCM2032", 0 },
-	{ "HISI0031", 0 },
+	{ "80860F0A", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "8086228A", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "AMD0020", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "AMDI0020", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "AMDI0022", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "APMC0D08", (kernel_ulong_t)&dw8250_dw_apb},
+	{ "BRCM2032", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "HISI0031", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "INT33C4", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "INT33C5", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "INT3434", (kernel_ulong_t)&dw8250_dw_apb },
+	{ "INT3435", (kernel_ulong_t)&dw8250_dw_apb },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 8f32fe9e149e..3c36a06a20b0 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1949,7 +1949,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	if ((status & UART_LSR_THRE) && (up->ier & UART_IER_THRI)) {
 		if (!up->dma || up->dma->tx_err)
 			serial8250_tx_chars(up);
-		else
+		else if (!up->dma->tx_running)
 			__stop_tx(up);
 	}
 
@@ -2975,8 +2975,10 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32BE:
 	case UPIO_MEM16:
 	case UPIO_MEM:
-		if (!port->mapbase)
+		if (!port->mapbase) {
+			ret = -EINVAL;
 			break;
+		}
 
 		if (!request_mem_region(port->mapbase, size, "serial")) {
 			ret = -EBUSY;