diff options
Diffstat (limited to 'drivers/tty/serial/Kconfig')
| -rw-r--r-- | drivers/tty/serial/Kconfig | 37 |
1 files changed, 36 insertions, 1 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 95b21a619900..113fccf82517 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -97,6 +97,11 @@ config SERIAL_8250_PNP This builds standard PNP serial support. You may be able to disable this feature if you only need legacy serial support. +config SERIAL_8250_FSL + bool + depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 + default PPC + config SERIAL_8250_HP300 tristate depends on SERIAL_8250 && HP300 @@ -535,6 +540,27 @@ config SERIAL_S5PV210 help Serial port support for Samsung's S5P Family of SoC's +config SERIAL_SIRFSOC + tristate "SiRF SoC Platform Serial port support" + depends on ARM && ARCH_PRIMA2 + select SERIAL_CORE + help + Support for the on-chip UART on the CSR SiRFprimaII series, + providing /dev/ttySiRF0, 1 and 2 (note, some machines may not + provide all of these ports, depending on how the serial port + pins are configured). + +config SERIAL_SIRFSOC_CONSOLE + bool "Support for console on SiRF SoC serial port" + depends on SERIAL_SIRFSOC=y + select SERIAL_CORE_CONSOLE + help + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySiRFx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) config SERIAL_MAX3100 tristate "MAX3100 support" @@ -1324,7 +1350,7 @@ config SERIAL_OF_PLATFORM config SERIAL_OMAP tristate "OMAP serial port support" - depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 + depends on ARCH_OMAP2PLUS select SERIAL_CORE help If you have a machine based on an Texas Instruments OMAP CPU you @@ -1575,6 +1601,15 @@ config SERIAL_PCH_UART ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. +config SERIAL_PCH_UART_CONSOLE + bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH" + depends on SERIAL_PCH_UART=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use the PCH UART as the system console + (the system console is the device which receives all kernel messages and + warnings and which allows logins in single user mode). + config SERIAL_MSM_SMD bool "Enable tty device interface for some SMD ports" default n |