diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 82 |
1 files changed, 73 insertions, 9 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 9289999cb7c6..dce1a23706e8 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -562,12 +562,36 @@ static irqreturn_t omap_wake_irq(int irq, void *dev_id) return IRQ_NONE; } +#ifdef CONFIG_SERIAL_8250_DMA +static int omap_8250_dma_handle_irq(struct uart_port *port); +#endif + +static irqreturn_t omap8250_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int iir; + int ret; + +#ifdef CONFIG_SERIAL_8250_DMA + if (up->dma) { + ret = omap_8250_dma_handle_irq(port); + return IRQ_RETVAL(ret); + } +#endif + + serial8250_rpm_get(up); + iir = serial_port_in(port, UART_IIR); + ret = serial8250_handle_irq(port, iir); + serial8250_rpm_put(up); + + return IRQ_RETVAL(ret); +} + static int omap_8250_startup(struct uart_port *port) { - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); + struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = port->private_data; - int ret; if (priv->wakeirq) { @@ -580,10 +604,31 @@ static int omap_8250_startup(struct uart_port *port) pm_runtime_get_sync(port->dev); - ret = serial8250_do_startup(port); - if (ret) + up->mcr = 0; + serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + up->lsr_saved_flags = 0; + up->msr_saved_flags = 0; + + if (up->dma) { + ret = serial8250_request_dma(up); + if (ret) { + dev_warn_ratelimited(port->dev, + "failed to request DMA\n"); + up->dma = NULL; + } + } + + ret = request_irq(port->irq, omap8250_irq, IRQF_SHARED, + dev_name(port->dev), port); + if (ret < 0) goto err; + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_out(up, UART_IER, up->ier); + #ifdef CONFIG_PM up->capabilities |= UART_CAP_RPM; #endif @@ -610,8 +655,7 @@ err: static void omap_8250_shutdown(struct uart_port *port) { - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); + struct uart_8250_port *up = up_to_u8250p(port); struct omap8250_priv *priv = port->private_data; flush_work(&priv->qos_work); @@ -621,11 +665,24 @@ static void omap_8250_shutdown(struct uart_port *port) pm_runtime_get_sync(port->dev); serial_out(up, UART_OMAP_WER, 0); - serial8250_do_shutdown(port); + + up->ier = 0; + serial_out(up, UART_IER, 0); + + if (up->dma) + serial8250_release_dma(up); + + /* + * Disable break condition and FIFOs + */ + if (up->lcr & UART_LCR_SBC) + serial_out(up, UART_LCR, up->lcr & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); pm_runtime_mark_last_busy(port->dev); pm_runtime_put_autosuspend(port->dev); + free_irq(port->irq, port); if (priv->wakeirq) free_irq(priv->wakeirq, port); } @@ -974,6 +1031,13 @@ static inline int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir) } #endif +static int omap8250_no_handle_irq(struct uart_port *port) +{ + /* IRQ has not been requested but handling irq? */ + WARN_ONCE(1, "Unexpected irq handling before port startup\n"); + return 0; +} + static int omap8250_probe(struct platform_device *pdev) { struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1075,6 +1139,7 @@ static int omap8250_probe(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); omap_serial_fill_features_erratas(&up, priv); + up.port.handle_irq = omap8250_no_handle_irq; #ifdef CONFIG_SERIAL_8250_DMA if (pdev->dev.of_node) { /* @@ -1088,7 +1153,6 @@ static int omap8250_probe(struct platform_device *pdev) ret = of_property_count_strings(pdev->dev.of_node, "dma-names"); if (ret == 2) { up.dma = &priv->omap8250_dma; - up.port.handle_irq = omap_8250_dma_handle_irq; priv->omap8250_dma.fn = the_no_dma_filter_fn; priv->omap8250_dma.tx_dma = omap_8250_tx_dma; priv->omap8250_dma.rx_dma = omap_8250_rx_dma; |