diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index c06631ced414..79418d4beb48 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -43,6 +43,7 @@ #define UART_ERRATA_CLOCK_DISABLE (1 << 3) #define UART_HAS_EFR2 BIT(4) #define UART_HAS_RHR_IT_DIS BIT(5) +#define UART_RX_TIMEOUT_QUIRK BIT(6) #define OMAP_UART_FCR_RX_TRIG 6 #define OMAP_UART_FCR_TX_TRIG 4 @@ -104,6 +105,9 @@ #define UART_OMAP_EFR2 0x23 #define UART_OMAP_EFR2_TIMEOUT_BEHAVE BIT(6) +/* RX FIFO occupancy indicator */ +#define UART_OMAP_RX_LVL 0x64 + struct omap8250_priv { int line; u8 habit; @@ -611,6 +615,7 @@ static int omap_8250_dma_handle_irq(struct uart_port *port); static irqreturn_t omap8250_irq(int irq, void *dev_id) { struct uart_port *port = dev_id; + struct omap8250_priv *priv = port->private_data; struct uart_8250_port *up = up_to_u8250p(port); unsigned int iir; int ret; @@ -625,6 +630,18 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id) serial8250_rpm_get(up); iir = serial_port_in(port, UART_IIR); ret = serial8250_handle_irq(port, iir); + + /* + * On K3 SoCs, it is observed that RX TIMEOUT is signalled after + * FIFO has been drained, in which case a dummy read of RX FIFO + * is required to clear RX TIMEOUT condition. + */ + if (priv->habit & UART_RX_TIMEOUT_QUIRK && + (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT && + serial_port_in(port, UART_OMAP_RX_LVL) == 0) { + serial_port_in(port, UART_RX); + } + serial8250_rpm_put(up); return IRQ_RETVAL(ret); @@ -1218,7 +1235,8 @@ static struct omap8250_dma_params am33xx_dma = { static struct omap8250_platdata am654_platdata = { .dma_params = &am654_dma, - .habit = UART_HAS_EFR2 | UART_HAS_RHR_IT_DIS, + .habit = UART_HAS_EFR2 | UART_HAS_RHR_IT_DIS | + UART_RX_TIMEOUT_QUIRK, }; static struct omap8250_platdata am33xx_platdata = { |