diff options
Diffstat (limited to 'drivers/usb/atm/speedtch.c')
| -rw-r--r-- | drivers/usb/atm/speedtch.c | 167 |
1 files changed, 120 insertions, 47 deletions
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index c1b47d74e206..7860c8a5800d 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -35,12 +35,14 @@ #include <linux/slab.h> #include <linux/stat.h> #include <linux/timer.h> +#include <linux/types.h> +#include <linux/usb_ch9.h> #include <linux/workqueue.h> #include "usbatm.h" #define DRIVER_AUTHOR "Johan Verrept, Duncan Sands <duncan.sands@free.fr>" -#define DRIVER_VERSION "1.9" +#define DRIVER_VERSION "1.10" #define DRIVER_DESC "Alcatel SpeedTouch USB driver version " DRIVER_VERSION static const char speedtch_driver_name[] = "speedtch"; @@ -66,31 +68,42 @@ static const char speedtch_driver_name[] = "speedtch"; #define RESUBMIT_DELAY 1000 /* milliseconds */ -#define DEFAULT_ALTSETTING 1 +#define DEFAULT_BULK_ALTSETTING 1 +#define DEFAULT_ISOC_ALTSETTING 2 #define DEFAULT_DL_512_FIRST 0 +#define DEFAULT_ENABLE_ISOC 0 #define DEFAULT_SW_BUFFERING 0 -static int altsetting = DEFAULT_ALTSETTING; +static unsigned int altsetting = 0; /* zero means: use the default */ static int dl_512_first = DEFAULT_DL_512_FIRST; +static int enable_isoc = DEFAULT_ENABLE_ISOC; static int sw_buffering = DEFAULT_SW_BUFFERING; -module_param(altsetting, int, S_IRUGO | S_IWUSR); +module_param(altsetting, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(altsetting, - "Alternative setting for data interface (default: " - __MODULE_STRING(DEFAULT_ALTSETTING) ")"); + "Alternative setting for data interface (bulk_default: " + __MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: " + __MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")"); module_param(dl_512_first, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(dl_512_first, "Read 512 bytes before sending firmware (default: " __MODULE_STRING(DEFAULT_DL_512_FIRST) ")"); +module_param(enable_isoc, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(enable_isoc, + "Use isochronous transfers if available (default: " + __MODULE_STRING(DEFAULT_ENABLE_ISOC) ")"); + module_param(sw_buffering, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(sw_buffering, "Enable software buffering (default: " __MODULE_STRING(DEFAULT_SW_BUFFERING) ")"); +#define INTERFACE_DATA 1 #define ENDPOINT_INT 0x81 -#define ENDPOINT_DATA 0x07 +#define ENDPOINT_BULK_DATA 0x07 +#define ENDPOINT_ISOC_DATA 0x07 #define ENDPOINT_FIRMWARE 0x05 #define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) ) @@ -98,6 +111,8 @@ MODULE_PARM_DESC(sw_buffering, struct speedtch_instance_data { struct usbatm_data *usbatm; + unsigned int altsetting; + struct work_struct status_checker; unsigned char last_status; @@ -205,7 +220,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance, buffer, 0x200, &actual_length, 2000); if (ret < 0 && ret != -ETIMEDOUT) - usb_dbg(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret); + usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret); else usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret); } @@ -219,7 +234,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance, buffer, thislen, &actual_length, DATA_TIMEOUT); if (ret < 0) { - usb_dbg(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret); + usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret); goto out_free; } usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size); @@ -232,7 +247,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance, buffer, 0x200, &actual_length, DATA_TIMEOUT); if (ret < 0) { - usb_dbg(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret); + usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret); goto out_free; } usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length); @@ -246,7 +261,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance, buffer, thislen, &actual_length, DATA_TIMEOUT); if (ret < 0) { - usb_dbg(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret); + usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret); goto out_free; } } @@ -259,7 +274,7 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance, buffer, 0x200, &actual_length, DATA_TIMEOUT); if (ret < 0) { - usb_dbg(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret); + usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret); goto out_free; } @@ -270,6 +285,11 @@ static int speedtch_upload_firmware(struct speedtch_instance_data *instance, because we're in our own kernel thread anyway. */ msleep_interruptible(1000); + if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) { + usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->altsetting, ret); + goto out_free; + } + /* Enable software buffering, if requested */ if (sw_buffering) speedtch_set_swbuff(instance, 1); @@ -285,8 +305,8 @@ out: return ret; } -static int speedtch_find_firmware(struct usb_interface *intf, int phase, - const struct firmware **fw_p) +static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf, + int phase, const struct firmware **fw_p) { struct device *dev = &intf->dev; const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice); @@ -295,24 +315,24 @@ static int speedtch_find_firmware(struct usb_interface *intf, int phase, char buf[24]; sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision); - dev_dbg(dev, "%s: looking for %s\n", __func__, buf); + usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf); if (request_firmware(fw_p, buf, dev)) { sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision); - dev_dbg(dev, "%s: looking for %s\n", __func__, buf); + usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf); if (request_firmware(fw_p, buf, dev)) { sprintf(buf, "speedtch-%d.bin", phase); - dev_dbg(dev, "%s: looking for %s\n", __func__, buf); + usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf); if (request_firmware(fw_p, buf, dev)) { - dev_warn(dev, "no stage %d firmware found!\n", phase); + usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase); return -ENOENT; } } } - dev_info(dev, "found stage %d firmware %s\n", phase, buf); + usb_info(usbatm, "found stage %d firmware %s\n", phase, buf); return 0; } @@ -323,15 +343,16 @@ static int speedtch_heavy_init(struct usbatm_data *usbatm, struct usb_interface struct speedtch_instance_data *instance = usbatm->driver_data; int ret; - if ((ret = speedtch_find_firmware(intf, 1, &fw1)) < 0) - return ret; + if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0) + return ret; - if ((ret = speedtch_find_firmware(intf, 2, &fw2)) < 0) { + if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) { release_firmware(fw1); return ret; } - ret = speedtch_upload_firmware(instance, fw1, fw2); + if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0) + usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret); release_firmware(fw2); release_firmware(fw1); @@ -428,7 +449,9 @@ static void speedtch_check_status(struct speedtch_instance_data *instance) int down_speed, up_speed, ret; unsigned char status; +#ifdef VERBOSE_DEBUG atm_dbg(usbatm, "%s entered\n", __func__); +#endif ret = speedtch_read_status(instance); if (ret < 0) { @@ -441,9 +464,9 @@ static void speedtch_check_status(struct speedtch_instance_data *instance) status = buf[OFFSET_7]; - atm_dbg(usbatm, "%s: line state %02x\n", __func__, status); - if ((status != instance->last_status) || !status) { + atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status); + switch (status) { case 0: atm_dev->signal = ATM_PHY_SIG_LOST; @@ -484,7 +507,7 @@ static void speedtch_check_status(struct speedtch_instance_data *instance) default: atm_dev->signal = ATM_PHY_SIG_UNKNOWN; - atm_info(usbatm, "Unknown line state %02x\n", status); + atm_info(usbatm, "unknown line state %02x\n", status); break; } @@ -583,11 +606,6 @@ static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_de atm_dbg(usbatm, "%s entered\n", __func__); - if ((ret = usb_set_interface(usb_dev, 1, altsetting)) < 0) { - atm_dbg(usbatm, "%s: usb_set_interface returned %d!\n", __func__, ret); - return ret; - } - /* Set MAC address, it is stored in the serial number */ memset(atm_dev->esi, 0, sizeof(atm_dev->esi)); if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) { @@ -678,20 +696,27 @@ static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_inte static int speedtch_bind(struct usbatm_data *usbatm, struct usb_interface *intf, - const struct usb_device_id *id, - int *need_heavy_init) + const struct usb_device_id *id) { struct usb_device *usb_dev = interface_to_usbdev(intf); - struct usb_interface *cur_intf; + struct usb_interface *cur_intf, *data_intf; struct speedtch_instance_data *instance; int ifnum = intf->altsetting->desc.bInterfaceNumber; int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces; int i, ret; + int use_isoc; usb_dbg(usbatm, "%s entered\n", __func__); + /* sanity checks */ + if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) { - usb_dbg(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass); + usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass); + return -ENODEV; + } + + if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) { + usb_err(usbatm, "%s: data interface not found!\n", __func__); return -ENODEV; } @@ -704,25 +729,71 @@ static int speedtch_bind(struct usbatm_data *usbatm, ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm); if (ret < 0) { - usb_dbg(usbatm, "%s: failed to claim interface %d (%d)\n", __func__, i, ret); + usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret); speedtch_release_interfaces(usb_dev, i); return ret; } } } - instance = kmalloc(sizeof(*instance), GFP_KERNEL); + instance = kzalloc(sizeof(*instance), GFP_KERNEL); if (!instance) { - usb_dbg(usbatm, "%s: no memory for instance data!\n", __func__); + usb_err(usbatm, "%s: no memory for instance data!\n", __func__); ret = -ENOMEM; goto fail_release; } - memset(instance, 0, sizeof(struct speedtch_instance_data)); - instance->usbatm = usbatm; + /* altsetting and enable_isoc may change at any moment, so take a snapshot */ + instance->altsetting = altsetting; + use_isoc = enable_isoc; + + if (instance->altsetting) + if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) { + usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->altsetting, ret); + instance->altsetting = 0; /* fall back to default */ + } + + if (!instance->altsetting && use_isoc) + if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) { + usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret); + use_isoc = 0; /* fall back to bulk */ + } + + if (use_isoc) { + const struct usb_host_interface *desc = data_intf->cur_altsetting; + const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in; + int i; + + use_isoc = 0; /* fall back to bulk if endpoint not found */ + + for (i=0; i<desc->desc.bNumEndpoints; i++) { + const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc; + + if ((endpoint_desc->bEndpointAddress == target_address)) { + use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC; + break; + } + } + + if (!use_isoc) + usb_info(usbatm, "isochronous transfer not supported - using bulk\n"); + } + + if (!use_isoc && !instance->altsetting) + if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) { + usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret); + goto fail_free; + } + + if (!instance->altsetting) + instance->altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING; + + usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0); + INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance); instance->status_checker.timer.function = speedtch_status_poll; @@ -749,13 +820,15 @@ static int speedtch_bind(struct usbatm_data *usbatm, 0x12, 0xc0, 0x07, 0x00, instance->scratch_buffer + OFFSET_7, SIZE_7, 500); - *need_heavy_init = (ret != SIZE_7); + usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0); - usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, need_heavy_init ? "not" : "already"); + usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not"); - if (*need_heavy_init) - if ((ret = usb_reset_device(usb_dev)) < 0) + if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT)) + if ((ret = usb_reset_device(usb_dev)) < 0) { + usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret); goto fail_free; + } usbatm->driver_data = instance; @@ -787,15 +860,15 @@ static void speedtch_unbind(struct usbatm_data *usbatm, struct usb_interface *in ***********/ static struct usbatm_driver speedtch_usbatm_driver = { - .owner = THIS_MODULE, .driver_name = speedtch_driver_name, .bind = speedtch_bind, .heavy_init = speedtch_heavy_init, .unbind = speedtch_unbind, .atm_start = speedtch_atm_start, .atm_stop = speedtch_atm_stop, - .in = ENDPOINT_DATA, - .out = ENDPOINT_DATA + .bulk_in = ENDPOINT_BULK_DATA, + .bulk_out = ENDPOINT_BULK_DATA, + .isoc_in = ENDPOINT_ISOC_DATA }; static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) |