diff options
Diffstat (limited to 'drivers/usb/gadget/pxa27x_udc.c')
| -rw-r--r-- | drivers/usb/gadget/pxa27x_udc.c | 272 |
1 files changed, 231 insertions, 41 deletions
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 990f40f988d4..8cc676ecbb23 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -30,6 +30,7 @@ #include <linux/proc_fs.h> #include <linux/clk.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/byteorder.h> #include <mach/hardware.h> @@ -278,7 +279,7 @@ static void pxa_init_debugfs(struct pxa_udc *udc) goto err_queues; eps = debugfs_create_file("epstate", 0400, root, udc, &eps_dbg_fops); - if (!queues) + if (!eps) goto err_eps; udc->debugfs_root = root; @@ -747,13 +748,13 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status) } /** - * ep_end_out_req - Ends control endpoint in request + * ep_end_out_req - Ends endpoint OUT request * @ep: physical endpoint * @req: pxa request * * Context: ep->lock held * - * Ends endpoint in request (completes usb request). + * Ends endpoint OUT request (completes usb request). */ static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) { @@ -762,13 +763,13 @@ static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) } /** - * ep0_end_out_req - Ends control endpoint in request (ends data stage) + * ep0_end_out_req - Ends control endpoint OUT request (ends data stage) * @ep: physical endpoint * @req: pxa request * * Context: ep->lock held * - * Ends control endpoint in request (completes usb request), and puts + * Ends control endpoint OUT request (completes usb request), and puts * control endpoint into idle state */ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) @@ -779,13 +780,13 @@ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) } /** - * ep_end_in_req - Ends endpoint out request + * ep_end_in_req - Ends endpoint IN request * @ep: physical endpoint * @req: pxa request * * Context: ep->lock held * - * Ends endpoint out request (completes usb request). + * Ends endpoint IN request (completes usb request). */ static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) { @@ -794,20 +795,18 @@ static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) } /** - * ep0_end_in_req - Ends control endpoint out request (ends data stage) + * ep0_end_in_req - Ends control endpoint IN request (ends data stage) * @ep: physical endpoint * @req: pxa request * * Context: ep->lock held * - * Ends control endpoint out request (completes usb request), and puts + * Ends control endpoint IN request (completes usb request), and puts * control endpoint into status state */ static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) { - struct pxa_udc *udc = ep->dev; - - set_ep0state(udc, IN_STATUS_STAGE); + set_ep0state(ep->dev, IN_STATUS_STAGE); ep_end_in_req(ep, req); } @@ -1167,7 +1166,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, ep_end_in_req(ep, req); } else { ep_err(ep, "got a request of %d bytes while" - "in state WATI_ACK_SET_CONF_INTERF\n", + "in state WAIT_ACK_SET_CONF_INTERF\n", length); ep_del_request(ep, req); rc = -EL2HLT; @@ -1213,30 +1212,26 @@ static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) struct udc_usb_ep *udc_usb_ep; struct pxa27x_request *req; unsigned long flags; - int rc; + int rc = -EINVAL; if (!_ep) - return -EINVAL; + return rc; udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); ep = udc_usb_ep->pxa_ep; if (!ep || is_ep0(ep)) - return -EINVAL; + return rc; spin_lock_irqsave(&ep->lock, flags); /* make sure it's actually queued on this endpoint */ list_for_each_entry(req, &ep->queue, queue) { - if (&req->req == _req) + if (&req->req == _req) { + req_done(ep, req, -ECONNRESET); + rc = 0; break; + } } - rc = -EINVAL; - if (&req->req != _req) - goto out; - - rc = 0; - req_done(ep, req, -ECONNRESET); -out: spin_unlock_irqrestore(&ep->lock, flags); return rc; } @@ -1471,6 +1466,32 @@ static struct usb_ep_ops pxa_ep_ops = { .fifo_flush = pxa_ep_fifo_flush, }; +/** + * dplus_pullup - Connect or disconnect pullup resistor to D+ pin + * @udc: udc device + * @on: 0 if disconnect pullup resistor, 1 otherwise + * Context: any + * + * Handle D+ pullup resistor, make the device visible to the usb bus, and + * declare it as a full speed usb device + */ +static void dplus_pullup(struct pxa_udc *udc, int on) +{ + if (on) { + if (gpio_is_valid(udc->mach->gpio_pullup)) + gpio_set_value(udc->mach->gpio_pullup, + !udc->mach->gpio_pullup_inverted); + if (udc->mach->udc_command) + udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); + } else { + if (gpio_is_valid(udc->mach->gpio_pullup)) + gpio_set_value(udc->mach->gpio_pullup, + udc->mach->gpio_pullup_inverted); + if (udc->mach->udc_command) + udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); + } + udc->pullup_on = on; +} /** * pxa_udc_get_frame - Returns usb frame number @@ -1500,21 +1521,145 @@ static int pxa_udc_wakeup(struct usb_gadget *_gadget) return 0; } +static void udc_enable(struct pxa_udc *udc); +static void udc_disable(struct pxa_udc *udc); + +/** + * should_enable_udc - Tells if UDC should be enabled + * @udc: udc device + * Context: any + * + * The UDC should be enabled if : + + * - the pullup resistor is connected + * - and a gadget driver is bound + * - and vbus is sensed (or no vbus sense is available) + * + * Returns 1 if UDC should be enabled, 0 otherwise + */ +static int should_enable_udc(struct pxa_udc *udc) +{ + int put_on; + + put_on = ((udc->pullup_on) && (udc->driver)); + put_on &= ((udc->vbus_sensed) || (!udc->transceiver)); + return put_on; +} + +/** + * should_disable_udc - Tells if UDC should be disabled + * @udc: udc device + * Context: any + * + * The UDC should be disabled if : + * - the pullup resistor is not connected + * - or no gadget driver is bound + * - or no vbus is sensed (when vbus sesing is available) + * + * Returns 1 if UDC should be disabled + */ +static int should_disable_udc(struct pxa_udc *udc) +{ + int put_off; + + put_off = ((!udc->pullup_on) || (!udc->driver)); + put_off |= ((!udc->vbus_sensed) && (udc->transceiver)); + return put_off; +} + +/** + * pxa_udc_pullup - Offer manual D+ pullup control + * @_gadget: usb gadget using the control + * @is_active: 0 if disconnect, else connect D+ pullup resistor + * Context: !in_interrupt() + * + * Returns 0 if OK, -EOPNOTSUPP if udc driver doesn't handle D+ pullup + */ +static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command) + return -EOPNOTSUPP; + + dplus_pullup(udc, is_active); + + if (should_enable_udc(udc)) + udc_enable(udc); + if (should_disable_udc(udc)) + udc_disable(udc); + return 0; +} + +static void udc_enable(struct pxa_udc *udc); +static void udc_disable(struct pxa_udc *udc); + +/** + * pxa_udc_vbus_session - Called by external transceiver to enable/disable udc + * @_gadget: usb gadget + * @is_active: 0 if should disable the udc, 1 if should enable + * + * Enables the udc, and optionnaly activates D+ pullup resistor. Or disables the + * udc, and deactivates D+ pullup resistor. + * + * Returns 0 + */ +static int pxa_udc_vbus_session(struct usb_gadget *_gadget, int is_active) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + udc->vbus_sensed = is_active; + if (should_enable_udc(udc)) + udc_enable(udc); + if (should_disable_udc(udc)) + udc_disable(udc); + + return 0; +} + +/** + * pxa_udc_vbus_draw - Called by gadget driver after SET_CONFIGURATION completed + * @_gadget: usb gadget + * @mA: current drawn + * + * Context: !in_interrupt() + * + * Called after a configuration was chosen by a USB host, to inform how much + * current can be drawn by the device from VBus line. + * + * Returns 0 or -EOPNOTSUPP if no transceiver is handling the udc + */ +static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) +{ + struct pxa_udc *udc; + + udc = to_gadget_udc(_gadget); + if (udc->transceiver) + return otg_set_power(udc->transceiver, mA); + return -EOPNOTSUPP; +} + static const struct usb_gadget_ops pxa_udc_ops = { .get_frame = pxa_udc_get_frame, .wakeup = pxa_udc_wakeup, - /* current versions must always be self-powered */ + .pullup = pxa_udc_pullup, + .vbus_session = pxa_udc_vbus_session, + .vbus_draw = pxa_udc_vbus_draw, }; /** * udc_disable - disable udc device controller * @udc: udc device + * Context: any * * Disables the udc device : disables clocks, udc interrupts, control endpoint * interrupts. */ static void udc_disable(struct pxa_udc *udc) { + if (!udc->enabled) + return; + udc_writel(udc, UDCICR0, 0); udc_writel(udc, UDCICR1, 0); @@ -1523,8 +1668,8 @@ static void udc_disable(struct pxa_udc *udc) ep0_idle(udc); udc->gadget.speed = USB_SPEED_UNKNOWN; - if (udc->mach->udc_command) - udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); + + udc->enabled = 0; } /** @@ -1555,10 +1700,9 @@ static __init void udc_init_data(struct pxa_udc *dev) } /* USB endpoints init */ - for (i = 0; i < NR_USB_ENDPOINTS; i++) - if (i != 0) - list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list, - &dev->gadget.ep_list); + for (i = 1; i < NR_USB_ENDPOINTS; i++) + list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list, + &dev->gadget.ep_list); } /** @@ -1570,6 +1714,9 @@ static __init void udc_init_data(struct pxa_udc *dev) */ static void udc_enable(struct pxa_udc *udc) { + if (udc->enabled) + return; + udc_writel(udc, UDCICR0, 0); udc_writel(udc, UDCICR1, 0); udc_clear_mask_UDCCR(udc, UDCCR_UDE); @@ -1598,9 +1745,7 @@ static void udc_enable(struct pxa_udc *udc) /* enable ep0 irqs */ pio_irq_enable(&udc->pxa_ep[0]); - dev_info(udc->dev, "UDC connecting\n"); - if (udc->mach->udc_command) - udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); + udc->enabled = 1; } /** @@ -1612,6 +1757,9 @@ static void udc_enable(struct pxa_udc *udc) * usb traffic follows until a disconnect is reported. Then a host may connect * again, or the driver might get unbound. * + * Note that the udc is not automatically enabled. Check function + * should_enable_udc(). + * * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise */ int usb_gadget_register_driver(struct usb_gadget_driver *driver) @@ -1630,6 +1778,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) /* first hook up the driver ... */ udc->driver = driver; udc->gadget.dev.driver = &driver->driver; + dplus_pullup(udc, 1); retval = device_add(&udc->gadget.dev); if (retval) { @@ -1645,9 +1794,21 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) dev_dbg(udc->dev, "registered gadget driver '%s'\n", driver->driver.name); - udc_enable(udc); + if (udc->transceiver) { + retval = otg_set_peripheral(udc->transceiver, &udc->gadget); + if (retval) { + dev_err(udc->dev, "can't bind to transceiver\n"); + goto transceiver_fail; + } + } + + if (should_enable_udc(udc)) + udc_enable(udc); return 0; +transceiver_fail: + if (driver->unbind) + driver->unbind(&udc->gadget); bind_fail: device_del(&udc->gadget.dev); add_fail: @@ -1699,14 +1860,17 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) stop_activity(udc, driver); udc_disable(udc); + dplus_pullup(udc, 0); driver->unbind(&udc->gadget); udc->driver = NULL; device_del(&udc->gadget.dev); - dev_info(udc->dev, "unregistered gadget driver '%s'\n", driver->driver.name); + + if (udc->transceiver) + return otg_set_peripheral(udc->transceiver, NULL); return 0; } EXPORT_SYMBOL(usb_gadget_unregister_driver); @@ -1823,14 +1987,14 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq) struct pxa27x_request *req = NULL; int completed = 0; + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, struct pxa27x_request, queue); + udccsr0 = udc_ep_readl(ep, UDCCSR); ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n", EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR), (fifo_irq << 1 | opc_irq)); - if (!list_empty(&ep->queue)) - req = list_entry(ep->queue.next, struct pxa27x_request, queue); - if (udccsr0 & UDCCSR0_SST) { ep_dbg(ep, "clearing stall status\n"); nuke(ep, -EPIPE); @@ -2212,7 +2376,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) { struct resource *regs; struct pxa_udc *udc = &memory; - int retval; + int retval = 0, gpio; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) @@ -2223,6 +2387,20 @@ static int __init pxa_udc_probe(struct platform_device *pdev) udc->dev = &pdev->dev; udc->mach = pdev->dev.platform_data; + udc->transceiver = otg_get_transceiver(); + + gpio = udc->mach->gpio_pullup; + if (gpio_is_valid(gpio)) { + retval = gpio_request(gpio, "USB D+ pullup"); + if (retval == 0) + gpio_direction_output(gpio, + udc->mach->gpio_pullup_inverted); + } + if (retval) { + dev_err(&pdev->dev, "Couldn't request gpio %d : %d\n", + gpio, retval); + return retval; + } udc->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(udc->clk)) { @@ -2240,6 +2418,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) device_initialize(&udc->gadget.dev); udc->gadget.dev.parent = &pdev->dev; udc->gadget.dev.dma_mask = NULL; + udc->vbus_sensed = 0; the_controller = udc; platform_set_drvdata(pdev, udc); @@ -2273,14 +2452,21 @@ err_clk: static int __exit pxa_udc_remove(struct platform_device *_dev) { struct pxa_udc *udc = platform_get_drvdata(_dev); + int gpio = udc->mach->gpio_pullup; usb_gadget_unregister_driver(udc->driver); free_irq(udc->irq, udc); pxa_cleanup_debugfs(udc); + if (gpio_is_valid(gpio)) + gpio_free(gpio); + + otg_put_transceiver(udc->transceiver); + udc->transceiver = NULL; platform_set_drvdata(_dev, NULL); the_controller = NULL; clk_put(udc->clk); + iounmap(udc->regs); return 0; } @@ -2319,6 +2505,8 @@ static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state) } udc_disable(udc); + udc->pullup_resume = udc->pullup_on; + dplus_pullup(udc, 0); return 0; } @@ -2346,7 +2534,9 @@ static int pxa_udc_resume(struct platform_device *_dev) ep->udccsr_value, ep->udccr_value); } - udc_enable(udc); + dplus_pullup(udc, udc->pullup_resume); + if (should_enable_udc(udc)) + udc_enable(udc); /* * We do not handle OTG yet. * |