diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 18 | ||||
| -rw-r--r-- | drivers/usb/host/max3421-hcd.c | 44 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-at91.c | 9 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 3 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci-renesas.c | 16 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-pci.c | 7 |
6 files changed, 50 insertions, 47 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 36f5bf6a0752..10b0365f3439 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -703,24 +703,28 @@ EXPORT_SYMBOL_GPL(ehci_setup); static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 status, masked_status, pcd_status = 0, cmd; + u32 status, current_status, masked_status, pcd_status = 0; + u32 cmd; int bh; spin_lock(&ehci->lock); - status = ehci_readl(ehci, &ehci->regs->status); + status = 0; + current_status = ehci_readl(ehci, &ehci->regs->status); +restart: /* e.g. cardbus physical eject */ - if (status == ~(u32) 0) { + if (current_status == ~(u32) 0) { ehci_dbg (ehci, "device removed\n"); goto dead; } + status |= current_status; /* * We don't use STS_FLR, but some controllers don't like it to * remain on, so mask it out along with the other status bits. */ - masked_status = status & (INTR_MASK | STS_FLR); + masked_status = current_status & (INTR_MASK | STS_FLR); /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { @@ -730,6 +734,12 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* clear (just) interrupts */ ehci_writel(ehci, masked_status, &ehci->regs->status); + + /* For edge interrupts, don't race with an interrupt bit being raised */ + current_status = ehci_readl(ehci, &ehci->regs->status); + if (current_status & INTR_MASK) + goto restart; + cmd = ehci_readl(ehci, &ehci->regs->command); bh = 0; diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index e7a8e0609853..59cc1bc7f12f 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -153,8 +153,6 @@ struct max3421_hcd { */ struct urb *curr_urb; enum scheduling_pass sched_pass; - struct usb_device *loaded_dev; /* dev that's loaded into the chip */ - int loaded_epnum; /* epnum whose toggles are loaded */ int urb_done; /* > 0 -> no errors, < 0: errno */ size_t curr_len; u8 hien; @@ -492,39 +490,17 @@ max3421_set_speed(struct usb_hcd *hcd, struct usb_device *dev) * Caller must NOT hold HCD spinlock. */ static void -max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum, - int force_toggles) +max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum) { - struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); - int old_epnum, same_ep, rcvtog, sndtog; - struct usb_device *old_dev; + int rcvtog, sndtog; u8 hctl; - old_dev = max3421_hcd->loaded_dev; - old_epnum = max3421_hcd->loaded_epnum; - - same_ep = (dev == old_dev && epnum == old_epnum); - if (same_ep && !force_toggles) - return; - - if (old_dev && !same_ep) { - /* save the old end-points toggles: */ - u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); - - rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1; - sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; - - /* no locking: HCD (i.e., we) own toggles, don't we? */ - usb_settoggle(old_dev, old_epnum, 0, rcvtog); - usb_settoggle(old_dev, old_epnum, 1, sndtog); - } /* setup new endpoint's toggle bits: */ rcvtog = usb_gettoggle(dev, epnum, 0); sndtog = usb_gettoggle(dev, epnum, 1); hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) | BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT)); - max3421_hcd->loaded_epnum = epnum; spi_wr8(hcd, MAX3421_REG_HCTL, hctl); /* @@ -532,7 +508,6 @@ max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum, * address-assignment so it's best to just always load the * address whenever the end-point changed/was forced. */ - max3421_hcd->loaded_dev = dev; spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum); } @@ -667,7 +642,7 @@ max3421_select_and_start_urb(struct usb_hcd *hcd) struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd); struct urb *urb, *curr_urb = NULL; struct max3421_ep *max3421_ep; - int epnum, force_toggles = 0; + int epnum; struct usb_host_endpoint *ep; struct list_head *pos; unsigned long flags; @@ -777,7 +752,6 @@ done: usb_settoggle(urb->dev, epnum, 0, 1); usb_settoggle(urb->dev, epnum, 1, 1); max3421_ep->pkt_state = PKT_STATE_SETUP; - force_toggles = 1; } else max3421_ep->pkt_state = PKT_STATE_TRANSFER; } @@ -785,7 +759,7 @@ done: spin_unlock_irqrestore(&max3421_hcd->lock, flags); max3421_ep->last_active = max3421_hcd->frame_number; - max3421_set_address(hcd, urb->dev, epnum, force_toggles); + max3421_set_address(hcd, urb->dev, epnum); max3421_set_speed(hcd, urb->dev); max3421_next_transfer(hcd, 0); return 1; @@ -1379,6 +1353,16 @@ max3421_urb_done(struct usb_hcd *hcd) status = 0; urb = max3421_hcd->curr_urb; if (urb) { + /* save the old end-points toggles: */ + u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL); + int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1; + int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1; + int epnum = usb_endpoint_num(&urb->ep->desc); + + /* no locking: HCD (i.e., we) own toggles, don't we? */ + usb_settoggle(urb->dev, epnum, 0, rcvtog); + usb_settoggle(urb->dev, epnum, 1, sndtog); + max3421_hcd->curr_urb = NULL; spin_lock_irqsave(&max3421_hcd->lock, flags); usb_hcd_unlink_urb_from_ep(hcd, urb); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 9bbd7ddd0003..a24aea3d2759 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -611,8 +611,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev) if (ohci_at91->wakeup) enable_irq_wake(hcd->irq); - ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); - ret = ohci_suspend(hcd, ohci_at91->wakeup); if (ret) { if (ohci_at91->wakeup) @@ -632,7 +630,10 @@ ohci_hcd_at91_drv_suspend(struct device *dev) /* flush the writes */ (void) ohci_readl (ohci, &ohci->regs->control); msleep(1); + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); at91_stop_clock(ohci_at91); + } else { + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); } return ret; @@ -644,6 +645,8 @@ ohci_hcd_at91_drv_resume(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); + if (ohci_at91->wakeup) disable_irq_wake(hcd->irq); else @@ -651,8 +654,6 @@ ohci_hcd_at91_drv_resume(struct device *dev) ohci_resume(hcd, false); - ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); - return 0; } diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index e9b18fc17617..151e93c4bd57 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1638,11 +1638,12 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) * Inform the usbcore about resume-in-progress by returning * a non-zero value even if there are no status changes. */ + spin_lock_irqsave(&xhci->lock, flags); + status = bus_state->resuming_ports; mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC | PORT_CEC; - spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ for (i = 0; i < max_ports; i++) { temp = readl(ports[i]->addr); diff --git a/drivers/usb/host/xhci-pci-renesas.c b/drivers/usb/host/xhci-pci-renesas.c index 1da647961c25..5923844ed821 100644 --- a/drivers/usb/host/xhci-pci-renesas.c +++ b/drivers/usb/host/xhci-pci-renesas.c @@ -207,8 +207,7 @@ static int renesas_check_rom_state(struct pci_dev *pdev) return 0; case RENESAS_ROM_STATUS_NO_RESULT: /* No result yet */ - dev_dbg(&pdev->dev, "Unknown ROM status ...\n"); - break; + return 0; case RENESAS_ROM_STATUS_ERROR: /* Error State */ default: /* All other states are marked as "Reserved states" */ @@ -225,12 +224,13 @@ static int renesas_fw_check_running(struct pci_dev *pdev) u8 fw_state; int err; - /* - * Only if device has ROM and loaded FW we can skip loading and - * return success. Otherwise (even unknown state), attempt to load FW. - */ - if (renesas_check_rom(pdev) && !renesas_check_rom_state(pdev)) - return 0; + /* Check if device has ROM and loaded, if so skip everything */ + err = renesas_check_rom(pdev); + if (err) { /* we have rom */ + err = renesas_check_rom_state(pdev); + if (!err) + return err; + } /* * Test if the device is actually needing the firmware. As most diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 18c2bbddf080..1c9a7957c45c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -636,7 +636,14 @@ static const struct pci_device_id pci_ids[] = { { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE(pci, pci_ids); + +/* + * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't + * load firmware, so don't encumber the xhci-pci driver with it. + */ +#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS) MODULE_FIRMWARE("renesas_usb_fw.mem"); +#endif /* pci driver glue; this is a "new style" PCI driver module */ static struct pci_driver xhci_pci_driver = { |