diff options
Diffstat (limited to 'drivers/usb/input/itmtouch.c')
| -rw-r--r-- | drivers/usb/input/itmtouch.c | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/drivers/usb/input/itmtouch.c b/drivers/usb/input/itmtouch.c new file mode 100644 index 000000000000..47dec6a1b344 --- /dev/null +++ b/drivers/usb/input/itmtouch.c @@ -0,0 +1,268 @@ +/****************************************************************************** + * itmtouch.c -- Driver for ITM touchscreen panel + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Based upon original work by Chris Collins <xfire-itmtouch@xware.cx>. + * + * Kudos to ITM for providing me with the datasheet for the panel, + * even though it was a day later than I had finished writing this + * driver. + * + * It has meant that I've been able to correct my interpretation of the + * protocol packets however. + * + * CC -- 2003/9/29 + * + * History + * 1.0 & 1.1 2003 (CC) vojtech@suse.cz + * Original version for 2.4.x kernels + * + * 1.2 02/03/2005 (HCE) hc@mivu.no + * Complete rewrite to support Linux 2.6.10, thanks to mtouchusb.c for hints. + * Unfortunately no calibration support at this time. + * + * 1.2.1 09/03/2005 (HCE) hc@mivu.no + * Code cleanup and adjusting syntax to start matching kernel standards + * + *****************************************************************************/ + +#include <linux/config.h> + +#ifdef CONFIG_USB_DEBUG + #define DEBUG +#else + #undef DEBUG +#endif + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/usb.h> + +/* only an 8 byte buffer necessary for a single packet */ +#define ITM_BUFSIZE 8 +#define PATH_SIZE 64 + +#define USB_VENDOR_ID_ITMINC 0x0403 +#define USB_PRODUCT_ID_TOUCHPANEL 0xf9e9 + +#define DRIVER_AUTHOR "Hans-Christian Egtvedt <hc@mivu.no>" +#define DRIVER_VERSION "v1.2.1" +#define DRIVER_DESC "USB ITM Inc Touch Panel Driver" +#define DRIVER_LICENSE "GPL" + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE( DRIVER_LICENSE ); + +struct itmtouch_dev { + struct usb_device *usbdev; /* usb device */ + struct input_dev inputdev; /* input device */ + struct urb *readurb; /* urb */ + char rbuf[ITM_BUFSIZE]; /* data */ + int users; + char name[128]; + char phys[64]; +}; + +static struct usb_device_id itmtouch_ids [] = { + { USB_DEVICE(USB_VENDOR_ID_ITMINC, USB_PRODUCT_ID_TOUCHPANEL) }, + { } +}; + +static void itmtouch_irq(struct urb *urb, struct pt_regs *regs) +{ + struct itmtouch_dev * itmtouch = urb->context; + unsigned char *data = urb->transfer_buffer; + struct input_dev *dev = &itmtouch->inputdev; + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ETIMEDOUT: + /* this urb is timing out */ + dbg("%s - urb timed out - was the device unplugged?", + __FUNCTION__); + return; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", + __FUNCTION__, urb->status); + goto exit; + } + + input_regs(dev, regs); + + /* if pressure has been released, then don't report X/Y */ + if (data[7] & 0x20) { + input_report_abs(dev, ABS_X, (data[0] & 0x1F) << 7 | (data[3] & 0x7F)); + input_report_abs(dev, ABS_Y, (data[1] & 0x1F) << 7 | (data[4] & 0x7F)); + } + + input_report_abs(dev, ABS_PRESSURE, (data[2] & 1) << 7 | (data[5] & 0x7F)); + input_report_key(dev, BTN_TOUCH, ~data[7] & 0x20); + input_sync(dev); + +exit: + retval = usb_submit_urb (urb, GFP_ATOMIC); + if (retval) + printk(KERN_ERR "%s - usb_submit_urb failed with result: %d", + __FUNCTION__, retval); +} + +static int itmtouch_open(struct input_dev *input) +{ + struct itmtouch_dev *itmtouch = input->private; + + itmtouch->readurb->dev = itmtouch->usbdev; + + if (usb_submit_urb(itmtouch->readurb, GFP_KERNEL)) + return -EIO; + + return 0; +} + +static void itmtouch_close(struct input_dev *input) +{ + struct itmtouch_dev *itmtouch = input->private; + + usb_kill_urb(itmtouch->readurb); +} + +static int itmtouch_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct itmtouch_dev *itmtouch; + struct usb_host_interface *interface; + struct usb_endpoint_descriptor *endpoint; + struct usb_device *udev = interface_to_usbdev(intf); + unsigned int pipe; + unsigned int maxp; + char path[PATH_SIZE]; + + interface = intf->cur_altsetting; + endpoint = &interface->endpoint[0].desc; + + if (!(itmtouch = kcalloc(1, sizeof(struct itmtouch_dev), GFP_KERNEL))) { + err("%s - Out of memory.", __FUNCTION__); + return -ENOMEM; + } + + itmtouch->usbdev = udev; + + itmtouch->inputdev.private = itmtouch; + itmtouch->inputdev.open = itmtouch_open; + itmtouch->inputdev.close = itmtouch_close; + + usb_make_path(udev, path, PATH_SIZE); + + itmtouch->inputdev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + itmtouch->inputdev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE); + itmtouch->inputdev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + + itmtouch->inputdev.name = itmtouch->name; + itmtouch->inputdev.phys = itmtouch->phys; + itmtouch->inputdev.id.bustype = BUS_USB; + itmtouch->inputdev.id.vendor = udev->descriptor.idVendor; + itmtouch->inputdev.id.product = udev->descriptor.idProduct; + itmtouch->inputdev.id.version = udev->descriptor.bcdDevice; + itmtouch->inputdev.dev = &intf->dev; + + if (!strlen(itmtouch->name)) + sprintf(itmtouch->name, "USB ITM touchscreen"); + + /* device limits */ + /* as specified by the ITM datasheet, X and Y are 12bit, + * Z (pressure) is 8 bit. However, the fields are defined up + * to 14 bits for future possible expansion. + */ + input_set_abs_params(&itmtouch->inputdev, ABS_X, 0, 0x0FFF, 2, 0); + input_set_abs_params(&itmtouch->inputdev, ABS_Y, 0, 0x0FFF, 2, 0); + input_set_abs_params(&itmtouch->inputdev, ABS_PRESSURE, 0, 0xFF, 2, 0); + + /* initialise the URB so we can read from the transport stream */ + pipe = usb_rcvintpipe(itmtouch->usbdev, endpoint->bEndpointAddress); + maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); + + if (maxp > ITM_BUFSIZE) + maxp = ITM_BUFSIZE; + + itmtouch->readurb = usb_alloc_urb(0, GFP_KERNEL); + + if (!itmtouch->readurb) { + dbg("%s - usb_alloc_urb failed: itmtouch->readurb", __FUNCTION__); + kfree(itmtouch); + return -ENOMEM; + } + + usb_fill_int_urb(itmtouch->readurb, itmtouch->usbdev, pipe, itmtouch->rbuf, + maxp, itmtouch_irq, itmtouch, endpoint->bInterval); + + input_register_device(&itmtouch->inputdev); + + printk(KERN_INFO "itmtouch: %s registered on %s\n", itmtouch->name, path); + usb_set_intfdata(intf, itmtouch); + + return 0; +} + +static void itmtouch_disconnect(struct usb_interface *intf) +{ + struct itmtouch_dev *itmtouch = usb_get_intfdata(intf); + + usb_set_intfdata(intf, NULL); + + if (itmtouch) { + input_unregister_device(&itmtouch->inputdev); + usb_kill_urb(itmtouch->readurb); + usb_free_urb(itmtouch->readurb); + kfree(itmtouch); + } +} + +MODULE_DEVICE_TABLE(usb, itmtouch_ids); + +static struct usb_driver itmtouch_driver = { + .owner = THIS_MODULE, + .name = "itmtouch", + .probe = itmtouch_probe, + .disconnect = itmtouch_disconnect, + .id_table = itmtouch_ids, +}; + +static int __init itmtouch_init(void) +{ + info(DRIVER_DESC " " DRIVER_VERSION); + info(DRIVER_AUTHOR); + return usb_register(&itmtouch_driver); +} + +static void __exit itmtouch_exit(void) +{ + usb_deregister(&itmtouch_driver); +} + +module_init(itmtouch_init); +module_exit(itmtouch_exit); |