diff options
Diffstat (limited to 'drivers/uwb/wlp')
| -rw-r--r-- | drivers/uwb/wlp/driver.c | 43 | ||||
| -rw-r--r-- | drivers/uwb/wlp/eda.c | 449 | ||||
| -rw-r--r-- | drivers/uwb/wlp/sysfs.c | 709 | ||||
| -rw-r--r-- | drivers/uwb/wlp/txrx.c | 374 | ||||
| -rw-r--r-- | drivers/uwb/wlp/wlp-internal.h | 228 | ||||
| -rw-r--r-- | drivers/uwb/wlp/wlp-lc.c | 585 |
6 files changed, 2388 insertions, 0 deletions
diff --git a/drivers/uwb/wlp/driver.c b/drivers/uwb/wlp/driver.c new file mode 100644 index 000000000000..cb8d699b6a67 --- /dev/null +++ b/drivers/uwb/wlp/driver.c @@ -0,0 +1,43 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Life cycle of WLP substack + * + * FIXME: Docs + */ + +#include <linux/module.h> + +static int __init wlp_subsys_init(void) +{ + return 0; +} +module_init(wlp_subsys_init); + +static void __exit wlp_subsys_exit(void) +{ + return; +} +module_exit(wlp_subsys_exit); + +MODULE_AUTHOR("Reinette Chatre <reinette.chatre@intel.com>"); +MODULE_DESCRIPTION("WiMedia Logical Link Control Protocol (WLP)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/wlp/eda.c b/drivers/uwb/wlp/eda.c new file mode 100644 index 000000000000..cdfe8dfc4340 --- /dev/null +++ b/drivers/uwb/wlp/eda.c @@ -0,0 +1,449 @@ +/* + * WUSB Wire Adapter: WLP interface + * Ethernet to device address cache + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We need to be able to map ethernet addresses to device addresses + * and back because there is not explicit relationship between the eth + * addresses used in the ETH frames and the device addresses (no, it + * would not have been simpler to force as ETH address the MBOA MAC + * address...no, not at all :). + * + * A device has one MBOA MAC address and one device address. It is possible + * for a device to have more than one virtual MAC address (although a + * virtual address can be the same as the MBOA MAC address). The device + * address is guaranteed to be unique among the devices in the extended + * beacon group (see ECMA 17.1.1). We thus use the device address as index + * to this cache. We do allow searching based on virtual address as this + * is how Ethernet frames will be addressed. + * + * We need to support virtual EUI-48. Although, right now the virtual + * EUI-48 will always be the same as the MAC SAP address. The EDA cache + * entry thus contains a MAC SAP address as well as the virtual address + * (used to map the network stack address to a neighbor). When we move + * to support more than one virtual MAC on a host then this organization + * will have to change. Perhaps a neighbor has a list of WSSs, each with a + * tag and virtual EUI-48. + * + * On data transmission + * it is used to determine if the neighbor is connected and what WSS it + * belongs to. With this we know what tag to add to the WLP frame. Storing + * the WSS in the EDA cache may be overkill because we only support one + * WSS. Hopefully we will support more than one WSS at some point. + * On data reception it is used to determine the WSS based on + * the tag and address of the transmitting neighbor. + */ + +#define D_LOCAL 5 +#include <linux/netdevice.h> +#include <linux/uwb/debug.h> +#include <linux/etherdevice.h> +#include <linux/wlp.h> +#include "wlp-internal.h" + + +/* FIXME: cache is not purged, only on device close */ + +/* FIXME: does not scale, change to dynamic array */ + +/* + * Initialize the EDA cache + * + * @returns 0 if ok, < 0 errno code on error + * + * Call when the interface is being brought up + * + * NOTE: Keep it as a separate function as the implementation will + * change and be more complex. + */ +void wlp_eda_init(struct wlp_eda *eda) +{ + INIT_LIST_HEAD(&eda->cache); + spin_lock_init(&eda->lock); +} + +/* + * Release the EDA cache + * + * @returns 0 if ok, < 0 errno code on error + * + * Called when the interface is brought down + */ +void wlp_eda_release(struct wlp_eda *eda) +{ + unsigned long flags; + struct wlp_eda_node *itr, *next; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry_safe(itr, next, &eda->cache, list_node) { + list_del(&itr->list_node); + kfree(itr); + } + spin_unlock_irqrestore(&eda->lock, flags); +} + +/* + * Add an address mapping + * + * @returns 0 if ok, < 0 errno code on error + * + * An address mapping is initially created when the neighbor device is seen + * for the first time (it is "onair"). At this time the neighbor is not + * connected or associated with a WSS so we only populate the Ethernet and + * Device address fields. + * + */ +int wlp_eda_create_node(struct wlp_eda *eda, + const unsigned char eth_addr[ETH_ALEN], + const struct uwb_dev_addr *dev_addr) +{ + int result = 0; + struct wlp_eda_node *itr; + unsigned long flags; + + BUG_ON(dev_addr == NULL || eth_addr == NULL); + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + printk(KERN_ERR "EDA cache already contains entry " + "for neighbor %02x:%02x\n", + dev_addr->data[1], dev_addr->data[0]); + result = -EEXIST; + goto out_unlock; + } + } + itr = kzalloc(sizeof(*itr), GFP_ATOMIC); + if (itr != NULL) { + memcpy(itr->eth_addr, eth_addr, sizeof(itr->eth_addr)); + itr->dev_addr = *dev_addr; + list_add(&itr->list_node, &eda->cache); + } else + result = -ENOMEM; +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Remove entry from EDA cache + * + * This is done when the device goes off air. + */ +void wlp_eda_rm_node(struct wlp_eda *eda, const struct uwb_dev_addr *dev_addr) +{ + struct wlp_eda_node *itr, *next; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry_safe(itr, next, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + list_del(&itr->list_node); + kfree(itr); + break; + } + } + spin_unlock_irqrestore(&eda->lock, flags); +} + +/* + * Update an address mapping + * + * @returns 0 if ok, < 0 errno code on error + */ +int wlp_eda_update_node(struct wlp_eda *eda, + const struct uwb_dev_addr *dev_addr, + struct wlp_wss *wss, + const unsigned char virt_addr[ETH_ALEN], + const u8 tag, const enum wlp_wss_connect state) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + /* Found it, update it */ + itr->wss = wss; + memcpy(itr->virt_addr, virt_addr, + sizeof(itr->virt_addr)); + itr->tag = tag; + itr->state = state; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Update only state field of an address mapping + * + * @returns 0 if ok, < 0 errno code on error + */ +int wlp_eda_update_node_state(struct wlp_eda *eda, + const struct uwb_dev_addr *dev_addr, + const enum wlp_wss_connect state) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + /* Found it, update it */ + itr->state = state; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Return contents of EDA cache entry + * + * @dev_addr: index to EDA cache + * @eda_entry: pointer to where contents of EDA cache will be copied + */ +int wlp_copy_eda_node(struct wlp_eda *eda, struct uwb_dev_addr *dev_addr, + struct wlp_eda_node *eda_entry) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + *eda_entry = *itr; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Execute function for every element in the cache + * + * @function: function to execute on element of cache (must be atomic) + * @priv: private data of function + * @returns: result of first function that failed, or last function + * executed if no function failed. + * + * Stop executing when function returns error for any element in cache. + * + * IMPORTANT: We are using a spinlock here: the function executed on each + * element has to be atomic. + */ +int wlp_eda_for_each(struct wlp_eda *eda, wlp_eda_for_each_f function, + void *priv) +{ + int result = 0; + struct wlp *wlp = container_of(eda, struct wlp, eda); + struct wlp_eda_node *entry; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(entry, &eda->cache, list_node) { + result = (*function)(wlp, entry, priv); + if (result < 0) + break; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Execute function for single element in the cache (return dev addr) + * + * @virt_addr: index into EDA cache used to determine which element to + * execute the function on + * @dev_addr: device address of element in cache will be returned using + * @dev_addr + * @function: function to execute on element of cache (must be atomic) + * @priv: private data of function + * @returns: result of function + * + * IMPORTANT: We are using a spinlock here: the function executed on the + * element has to be atomic. + */ +int wlp_eda_for_virtual(struct wlp_eda *eda, + const unsigned char virt_addr[ETH_ALEN], + struct uwb_dev_addr *dev_addr, + wlp_eda_for_each_f function, + void *priv) +{ + int result = 0; + struct wlp *wlp = container_of(eda, struct wlp, eda); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_eda_node *itr; + unsigned long flags; + int found = 0; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(itr->virt_addr, virt_addr, + sizeof(itr->virt_addr))) { + d_printf(6, dev, "EDA: looking for " + "%02x:%02x:%02x:%02x:%02x:%02x hit %02x:%02x " + "wss %p tag 0x%02x state %u\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5], + itr->dev_addr.data[1], + itr->dev_addr.data[0], itr->wss, + itr->tag, itr->state); + result = (*function)(wlp, itr, priv); + *dev_addr = itr->dev_addr; + found = 1; + break; + } else + d_printf(6, dev, "EDA: looking for " + "%02x:%02x:%02x:%02x:%02x:%02x " + "against " + "%02x:%02x:%02x:%02x:%02x:%02x miss\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5], + itr->virt_addr[0], itr->virt_addr[1], + itr->virt_addr[2], itr->virt_addr[3], + itr->virt_addr[4], itr->virt_addr[5]); + } + if (!found) { + if (printk_ratelimit()) + dev_err(dev, "EDA: Eth addr %02x:%02x:%02x" + ":%02x:%02x:%02x not found.\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5]); + result = -ENODEV; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +static const char *__wlp_wss_connect_state[] = { "WLP_WSS_UNCONNECTED", + "WLP_WSS_CONNECTED", + "WLP_WSS_CONNECT_FAILED", +}; + +static const char *wlp_wss_connect_state_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_wss_connect_state)) + return "unknown WSS connection state"; + return __wlp_wss_connect_state[id]; +} + +/* + * View EDA cache from user space + * + * A debugging feature to give user visibility into the EDA cache. Also + * used to display members of WSS to user (called from wlp_wss_members_show()) + */ +ssize_t wlp_eda_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + struct wlp_eda_node *entry; + unsigned long flags; + struct wlp_eda *eda = &wlp->eda; + spin_lock_irqsave(&eda->lock, flags); + result = scnprintf(buf, PAGE_SIZE, "#eth_addr dev_addr wss_ptr " + "tag state virt_addr\n"); + list_for_each_entry(entry, &eda->cache, list_node) { + result += scnprintf(buf + result, PAGE_SIZE - result, + "%02x:%02x:%02x:%02x:%02x:%02x %02x:%02x " + "%p 0x%02x %s " + "%02x:%02x:%02x:%02x:%02x:%02x\n", + entry->eth_addr[0], entry->eth_addr[1], + entry->eth_addr[2], entry->eth_addr[3], + entry->eth_addr[4], entry->eth_addr[5], + entry->dev_addr.data[1], + entry->dev_addr.data[0], entry->wss, + entry->tag, + wlp_wss_connect_state_str(entry->state), + entry->virt_addr[0], entry->virt_addr[1], + entry->virt_addr[2], entry->virt_addr[3], + entry->virt_addr[4], entry->virt_addr[5]); + if (result >= PAGE_SIZE) + break; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} +EXPORT_SYMBOL_GPL(wlp_eda_show); + +/* + * Add new EDA cache entry based on user input in sysfs + * + * Should only be used for debugging. + * + * The WSS is assumed to be the only WSS supported. This needs to be + * redesigned when we support more than one WSS. + */ +ssize_t wlp_eda_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + struct wlp_eda *eda = &wlp->eda; + u8 eth_addr[6]; + struct uwb_dev_addr dev_addr; + u8 tag; + unsigned state; + + result = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx " + "%02hhx:%02hhx %02hhx %u\n", + ð_addr[0], ð_addr[1], + ð_addr[2], ð_addr[3], + ð_addr[4], ð_addr[5], + &dev_addr.data[1], &dev_addr.data[0], &tag, &state); + switch (result) { + case 6: /* no dev addr specified -- remove entry NOT IMPLEMENTED */ + /*result = wlp_eda_rm(eda, eth_addr, &dev_addr);*/ + result = -ENOSYS; + break; + case 10: + state = state >= 1 ? 1 : 0; + result = wlp_eda_create_node(eda, eth_addr, &dev_addr); + if (result < 0 && result != -EEXIST) + goto error; + /* Set virtual addr to be same as MAC */ + result = wlp_eda_update_node(eda, &dev_addr, &wlp->wss, + eth_addr, tag, state); + if (result < 0) + goto error; + break; + default: /* bad format */ + result = -EINVAL; + } +error: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_eda_store); diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c new file mode 100644 index 000000000000..1bb9b1f97d47 --- /dev/null +++ b/drivers/uwb/wlp/sysfs.c @@ -0,0 +1,709 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * sysfs functions + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: Docs + * + */ + +#include <linux/wlp.h> +#include "wlp-internal.h" + +static +size_t wlp_wss_wssid_e_print(char *buf, size_t bufsize, + struct wlp_wssid_e *wssid_e) +{ + size_t used = 0; + used += scnprintf(buf, bufsize, " WSS: "); + used += wlp_wss_uuid_print(buf + used, bufsize - used, + &wssid_e->wssid); + + if (wssid_e->info != NULL) { + used += scnprintf(buf + used, bufsize - used, " "); + used += uwb_mac_addr_print(buf + used, bufsize - used, + &wssid_e->info->bcast); + used += scnprintf(buf + used, bufsize - used, " %u %u %s\n", + wssid_e->info->accept_enroll, + wssid_e->info->sec_status, + wssid_e->info->name); + } + return used; +} + +/** + * Print out information learned from neighbor discovery + * + * Some fields being printed may not be included in the device discovery + * information (it is not mandatory). We are thus careful how the + * information is printed to ensure it is clear to the user what field is + * being referenced. + * The information being printed is for one time use - temporary storage is + * cleaned after it is printed. + * + * Ideally sysfs output should be on one line. The information printed here + * contain a few strings so it will be hard to parse if they are all + * printed on the same line - without agreeing on a standard field + * separator. + */ +static +ssize_t wlp_wss_neighborhood_print_remove(struct wlp *wlp, char *buf, + size_t bufsize) +{ + size_t used = 0; + struct wlp_neighbor_e *neighb; + struct wlp_wssid_e *wssid_e; + + mutex_lock(&wlp->nbmutex); + used = scnprintf(buf, bufsize, "#Neighbor information\n" + "#uuid dev_addr\n" + "# Device Name:\n# Model Name:\n# Manufacturer:\n" + "# Model Nr:\n# Serial:\n" + "# Pri Dev type: CategoryID OUI OUISubdiv " + "SubcategoryID\n" + "# WSS: WSSID WSS_name accept_enroll sec_status " + "bcast\n" + "# WSS: WSSID WSS_name accept_enroll sec_status " + "bcast\n\n"); + list_for_each_entry(neighb, &wlp->neighbors, node) { + if (bufsize - used <= 0) + goto out; + used += wlp_wss_uuid_print(buf + used, bufsize - used, + &neighb->uuid); + buf[used++] = ' '; + used += uwb_dev_addr_print(buf + used, bufsize - used, + &neighb->uwb_dev->dev_addr); + if (neighb->info != NULL) + used += scnprintf(buf + used, bufsize - used, + "\n Device Name: %s\n" + " Model Name: %s\n" + " Manufacturer:%s \n" + " Model Nr: %s\n" + " Serial: %s\n" + " Pri Dev type: " + "%u %02x:%02x:%02x %u %u\n", + neighb->info->name, + neighb->info->model_name, + neighb->info->manufacturer, + neighb->info->model_nr, + neighb->info->serial, + neighb->info->prim_dev_type.category, + neighb->info->prim_dev_type.OUI[0], + neighb->info->prim_dev_type.OUI[1], + neighb->info->prim_dev_type.OUI[2], + neighb->info->prim_dev_type.OUIsubdiv, + neighb->info->prim_dev_type.subID); + list_for_each_entry(wssid_e, &neighb->wssid, node) { + used += wlp_wss_wssid_e_print(buf + used, + bufsize - used, + wssid_e); + } + buf[used++] = '\n'; + wlp_remove_neighbor_tmp_info(neighb); + } + + +out: + mutex_unlock(&wlp->nbmutex); + return used; +} + + +/** + * Show properties of all WSS in neighborhood. + * + * Will trigger a complete discovery of WSS activated by this device and + * its neighbors. + */ +ssize_t wlp_neighborhood_show(struct wlp *wlp, char *buf) +{ + wlp_discover(wlp); + return wlp_wss_neighborhood_print_remove(wlp, buf, PAGE_SIZE); +} +EXPORT_SYMBOL_GPL(wlp_neighborhood_show); + +static +ssize_t __wlp_wss_properties_show(struct wlp_wss *wss, char *buf, + size_t bufsize) +{ + ssize_t result; + + result = wlp_wss_uuid_print(buf, bufsize, &wss->wssid); + result += scnprintf(buf + result, bufsize - result, " "); + result += uwb_mac_addr_print(buf + result, bufsize - result, + &wss->bcast); + result += scnprintf(buf + result, bufsize - result, + " 0x%02x %u ", wss->hash, wss->secure_status); + result += wlp_wss_key_print(buf + result, bufsize - result, + wss->master_key); + result += scnprintf(buf + result, bufsize - result, " 0x%02x ", + wss->tag); + result += uwb_mac_addr_print(buf + result, bufsize - result, + &wss->virtual_addr); + result += scnprintf(buf + result, bufsize - result, " %s", wss->name); + result += scnprintf(buf + result, bufsize - result, + "\n\n#WSSID\n#WSS broadcast address\n" + "#WSS hash\n#WSS secure status\n" + "#WSS master key\n#WSS local tag\n" + "#WSS local virtual EUI-48\n#WSS name\n"); + return result; +} + +/** + * Show which WSS is activated. + */ +ssize_t wlp_wss_activate_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + if (wss->state >= WLP_WSS_STATE_ACTIVE) + result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); + else + result = scnprintf(buf, PAGE_SIZE, "No local WSS active.\n"); + result += scnprintf(buf + result, PAGE_SIZE - result, + "\n\n" + "# echo WSSID SECURE_STATUS ACCEPT_ENROLLMENT " + "NAME #create new WSS\n" + "# echo WSSID [DEV ADDR] #enroll in and activate " + "existing WSS, can request registrar\n" + "#\n" + "# WSSID is a 16 byte hex array. Eg. 12 A3 3B ... \n" + "# SECURE_STATUS 0 - unsecure, 1 - secure (default)\n" + "# ACCEPT_ENROLLMENT 0 - no, 1 - yes (default)\n" + "# NAME is the text string identifying the WSS\n" + "# DEV ADDR is the device address of neighbor " + "that should be registrar. Eg. 32:AB\n"); + + mutex_unlock(&wss->mutex); +out: + return result; + +} +EXPORT_SYMBOL_GPL(wlp_wss_activate_show); + +/** + * Create/activate a new WSS or enroll/activate in neighboring WSS + * + * The user can provide the WSSID of a WSS in which it wants to enroll. + * Only the WSSID is necessary if the WSS have been discovered before. If + * the WSS has not been discovered before, or the user wants to use a + * particular neighbor as its registrar, then the user can also provide a + * device address or the neighbor that will be used as registrar. + * + * A new WSS is created when the user provides a WSSID, secure status, and + * WSS name. + */ +ssize_t wlp_wss_activate_store(struct wlp_wss *wss, + const char *buf, size_t size) +{ + ssize_t result = -EINVAL; + struct wlp_uuid wssid; + struct uwb_dev_addr dev; + struct uwb_dev_addr bcast = {.data = {0xff, 0xff} }; + char name[65]; + unsigned sec_status, accept; + memset(name, 0, sizeof(name)); + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx:%02hhx", + &wssid.data[0] , &wssid.data[1], + &wssid.data[2] , &wssid.data[3], + &wssid.data[4] , &wssid.data[5], + &wssid.data[6] , &wssid.data[7], + &wssid.data[8] , &wssid.data[9], + &wssid.data[10], &wssid.data[11], + &wssid.data[12], &wssid.data[13], + &wssid.data[14], &wssid.data[15], + &dev.data[1], &dev.data[0]); + if (result == 16 || result == 17) { + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%u %u %64c", + &wssid.data[0] , &wssid.data[1], + &wssid.data[2] , &wssid.data[3], + &wssid.data[4] , &wssid.data[5], + &wssid.data[6] , &wssid.data[7], + &wssid.data[8] , &wssid.data[9], + &wssid.data[10], &wssid.data[11], + &wssid.data[12], &wssid.data[13], + &wssid.data[14], &wssid.data[15], + &sec_status, &accept, name); + if (result == 16) + result = wlp_wss_enroll_activate(wss, &wssid, &bcast); + else if (result == 19) { + sec_status = sec_status == 0 ? 0 : 1; + accept = accept == 0 ? 0 : 1; + /* We read name using %c, so the newline needs to be + * removed */ + if (strlen(name) != sizeof(name) - 1) + name[strlen(name) - 1] = '\0'; + result = wlp_wss_create_activate(wss, &wssid, name, + sec_status, accept); + } else + result = -EINVAL; + } else if (result == 18) + result = wlp_wss_enroll_activate(wss, &wssid, &dev); + else + result = -EINVAL; + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_wss_activate_store); + +/** + * Show the UUID of this host + */ +ssize_t wlp_uuid_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + + mutex_lock(&wlp->mutex); + result = wlp_wss_uuid_print(buf, PAGE_SIZE, &wlp->uuid); + buf[result++] = '\n'; + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_uuid_show); + +/** + * Store a new UUID for this host + * + * According to the spec this should be encoded as an octet string in the + * order the octets are shown in string representation in RFC 4122 (WLP + * 0.99 [Table 6]) + * + * We do not check value provided by user. + */ +ssize_t wlp_uuid_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + struct wlp_uuid uuid; + + mutex_lock(&wlp->mutex); + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx ", + &uuid.data[0] , &uuid.data[1], + &uuid.data[2] , &uuid.data[3], + &uuid.data[4] , &uuid.data[5], + &uuid.data[6] , &uuid.data[7], + &uuid.data[8] , &uuid.data[9], + &uuid.data[10], &uuid.data[11], + &uuid.data[12], &uuid.data[13], + &uuid.data[14], &uuid.data[15]); + if (result != 16) { + result = -EINVAL; + goto error; + } + wlp->uuid = uuid; +error: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_uuid_store); + +/** + * Show contents of members of device information structure + */ +#define wlp_dev_info_show(type) \ +ssize_t wlp_dev_##type##_show(struct wlp *wlp, char *buf) \ +{ \ + ssize_t result = 0; \ + mutex_lock(&wlp->mutex); \ + if (wlp->dev_info == NULL) { \ + result = __wlp_setup_device_info(wlp); \ + if (result < 0) \ + goto out; \ + } \ + result = scnprintf(buf, PAGE_SIZE, "%s\n", wlp->dev_info->type);\ +out: \ + mutex_unlock(&wlp->mutex); \ + return result; \ +} \ +EXPORT_SYMBOL_GPL(wlp_dev_##type##_show); + +wlp_dev_info_show(name) +wlp_dev_info_show(model_name) +wlp_dev_info_show(model_nr) +wlp_dev_info_show(manufacturer) +wlp_dev_info_show(serial) + +/** + * Store contents of members of device information structure + */ +#define wlp_dev_info_store(type, len) \ +ssize_t wlp_dev_##type##_store(struct wlp *wlp, const char *buf, size_t size)\ +{ \ + ssize_t result; \ + char format[10]; \ + mutex_lock(&wlp->mutex); \ + if (wlp->dev_info == NULL) { \ + result = __wlp_alloc_device_info(wlp); \ + if (result < 0) \ + goto out; \ + } \ + memset(wlp->dev_info->type, 0, sizeof(wlp->dev_info->type)); \ + sprintf(format, "%%%uc", len); \ + result = sscanf(buf, format, wlp->dev_info->type); \ +out: \ + mutex_unlock(&wlp->mutex); \ + return result < 0 ? result : size; \ +} \ +EXPORT_SYMBOL_GPL(wlp_dev_##type##_store); + +wlp_dev_info_store(name, 32) +wlp_dev_info_store(manufacturer, 64) +wlp_dev_info_store(model_name, 32) +wlp_dev_info_store(model_nr, 32) +wlp_dev_info_store(serial, 32) + +static +const char *__wlp_dev_category[] = { + [WLP_DEV_CAT_COMPUTER] = "Computer", + [WLP_DEV_CAT_INPUT] = "Input device", + [WLP_DEV_CAT_PRINT_SCAN_FAX_COPIER] = "Printer, scanner, FAX, or " + "Copier", + [WLP_DEV_CAT_CAMERA] = "Camera", + [WLP_DEV_CAT_STORAGE] = "Storage Network", + [WLP_DEV_CAT_INFRASTRUCTURE] = "Infrastructure", + [WLP_DEV_CAT_DISPLAY] = "Display", + [WLP_DEV_CAT_MULTIM] = "Multimedia device", + [WLP_DEV_CAT_GAMING] = "Gaming device", + [WLP_DEV_CAT_TELEPHONE] = "Telephone", + [WLP_DEV_CAT_OTHER] = "Other", +}; + +static +const char *wlp_dev_category_str(unsigned cat) +{ + if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) + || cat == WLP_DEV_CAT_OTHER) + return __wlp_dev_category[cat]; + return "unknown category"; +} + +ssize_t wlp_dev_prim_category_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%s\n", + wlp_dev_category_str(wlp->dev_info->prim_dev_type.category)); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_category_show); + +ssize_t wlp_dev_prim_category_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + u16 cat; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%hu", &cat); + if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) + || cat == WLP_DEV_CAT_OTHER) + wlp->dev_info->prim_dev_type.category = cat; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_category_store); + +ssize_t wlp_dev_prim_OUI_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%02x:%02x:%02x\n", + wlp->dev_info->prim_dev_type.OUI[0], + wlp->dev_info->prim_dev_type.OUI[1], + wlp->dev_info->prim_dev_type.OUI[2]); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_show); + +ssize_t wlp_dev_prim_OUI_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + u8 OUI[3]; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%hhx:%hhx:%hhx", + &OUI[0], &OUI[1], &OUI[2]); + if (result != 3) { + result = -EINVAL; + goto out; + } else + memcpy(wlp->dev_info->prim_dev_type.OUI, OUI, sizeof(OUI)); +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_store); + + +ssize_t wlp_dev_prim_OUI_sub_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%u\n", + wlp->dev_info->prim_dev_type.OUIsubdiv); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_show); + +ssize_t wlp_dev_prim_OUI_sub_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + unsigned sub; + u8 max_sub = ~0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%u", &sub); + if (sub <= max_sub) + wlp->dev_info->prim_dev_type.OUIsubdiv = sub; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_store); + +ssize_t wlp_dev_prim_subcat_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%u\n", + wlp->dev_info->prim_dev_type.subID); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_show); + +ssize_t wlp_dev_prim_subcat_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + unsigned sub; + __le16 max_sub = ~0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%u", &sub); + if (sub <= max_sub) + wlp->dev_info->prim_dev_type.subID = sub; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_store); + +/** + * Subsystem implementation for interaction with individual WSS via sysfs + * + * Followed instructions for subsystem in Documentation/filesystems/sysfs.txt + */ + +#define kobj_to_wlp_wss(obj) container_of(obj, struct wlp_wss, kobj) +#define attr_to_wlp_wss_attr(_attr) \ + container_of(_attr, struct wlp_wss_attribute, attr) + +/** + * Sysfs subsystem: forward read calls + * + * Sysfs operation for forwarding read call to the show method of the + * attribute owner + */ +static +ssize_t wlp_wss_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); + struct wlp_wss *wss = kobj_to_wlp_wss(kobj); + ssize_t ret = -EIO; + + if (wss_attr->show) + ret = wss_attr->show(wss, buf); + return ret; +} +/** + * Sysfs subsystem: forward write calls + * + * Sysfs operation for forwarding write call to the store method of the + * attribute owner + */ +static +ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); + struct wlp_wss *wss = kobj_to_wlp_wss(kobj); + ssize_t ret = -EIO; + + if (wss_attr->store) + ret = wss_attr->store(wss, buf, count); + return ret; +} + +static +struct sysfs_ops wss_sysfs_ops = { + .show = wlp_wss_attr_show, + .store = wlp_wss_attr_store, +}; + +struct kobj_type wss_ktype = { + .release = wlp_wss_release, + .sysfs_ops = &wss_sysfs_ops, +}; + + +/** + * Sysfs files for individual WSS + */ + +/** + * Print static properties of this WSS + * + * The name of a WSS may not be null teminated. It's max size is 64 bytes + * so we copy it to a larger array just to make sure we print sane data. + */ +static ssize_t wlp_wss_properties_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); + mutex_unlock(&wss->mutex); +out: + return result; +} +WSS_ATTR(properties, S_IRUGO, wlp_wss_properties_show, NULL); + +/** + * Print all connected members of this WSS + * The EDA cache contains all members of WSS neighborhood. + */ +static ssize_t wlp_wss_members_show(struct wlp_wss *wss, char *buf) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + return wlp_eda_show(wlp, buf); +} +WSS_ATTR(members, S_IRUGO, wlp_wss_members_show, NULL); + +static +const char *__wlp_strstate[] = { + "none", + "partially enrolled", + "enrolled", + "active", + "connected", +}; + +static const char *wlp_wss_strstate(unsigned state) +{ + if (state >= ARRAY_SIZE(__wlp_strstate)) + return "unknown state"; + return __wlp_strstate[state]; +} + +/* + * Print current state of this WSS + */ +static ssize_t wlp_wss_state_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + result = scnprintf(buf, PAGE_SIZE, "%s\n", + wlp_wss_strstate(wss->state)); + mutex_unlock(&wss->mutex); +out: + return result; +} +WSS_ATTR(state, S_IRUGO, wlp_wss_state_show, NULL); + + +static +struct attribute *wss_attrs[] = { + &wss_attr_properties.attr, + &wss_attr_members.attr, + &wss_attr_state.attr, + NULL, +}; + +struct attribute_group wss_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wss_attrs, +}; diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c new file mode 100644 index 000000000000..c701bd1a2887 --- /dev/null +++ b/drivers/uwb/wlp/txrx.c @@ -0,0 +1,374 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Message exchange infrastructure + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: Docs + * + */ + +#include <linux/etherdevice.h> +#include <linux/wlp.h> +#define D_LOCAL 5 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +/** + * Direct incoming association msg to correct parsing routine + * + * We only expect D1, E1, C1, C3 messages as new. All other incoming + * association messages should form part of an established session that is + * handled elsewhere. + * The handling of these messages often require calling sleeping functions + * - this cannot be done in interrupt context. We use the kernel's + * workqueue to handle these messages. + */ +static +void wlp_direct_assoc_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *assoc = (void *) skb->data; + struct wlp_assoc_frame_ctx *frame_ctx; + d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb); + frame_ctx = kmalloc(sizeof(*frame_ctx), GFP_ATOMIC); + if (frame_ctx == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for association " + "frame handling.\n"); + kfree_skb(skb); + goto out; + } + frame_ctx->wlp = wlp; + frame_ctx->skb = skb; + frame_ctx->src = *src; + switch (assoc->type) { + case WLP_ASSOC_D1: + d_printf(5, dev, "Received a D1 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_d1_frame); + schedule_work(&frame_ctx->ws); + break; + case WLP_ASSOC_E1: + d_printf(5, dev, "Received a E1 frame. FIXME?\n"); + kfree_skb(skb); /* Temporary until we handle it */ + kfree(frame_ctx); /* Temporary until we handle it */ + break; + case WLP_ASSOC_C1: + d_printf(5, dev, "Received a C1 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_c1_frame); + schedule_work(&frame_ctx->ws); + break; + case WLP_ASSOC_C3: + d_printf(5, dev, "Received a C3 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_c3_frame); + schedule_work(&frame_ctx->ws); + break; + default: + dev_err(dev, "Received unexpected association frame. " + "Type = %d \n", assoc->type); + kfree_skb(skb); + kfree(frame_ctx); + break; + } +out: + d_fnend(5, dev, "wlp %p\n", wlp); +} + +/** + * Process incoming association frame + * + * Although it could be possible to deal with some incoming association + * messages without creating a new session we are keeping things simple. We + * do not accept new association messages if there is a session in progress + * and the messages do not belong to that session. + * + * If an association message arrives that causes the creation of a session + * (WLP_ASSOC_E1) while we are in the process of creating a session then we + * rely on the neighbor mutex to protect the data. That is, the new session + * will not be started until the previous is completed. + */ +static +void wlp_receive_assoc_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *assoc = (void *) skb->data; + struct wlp_session *session = wlp->session; + u8 version; + d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb); + + if (wlp_get_version(wlp, &assoc->version, &version, + sizeof(assoc->version)) < 0) + goto error; + if (version != WLP_VERSION) { + dev_err(dev, "Unsupported WLP version in association " + "message.\n"); + goto error; + } + if (session != NULL) { + /* Function that created this session is still holding the + * &wlp->mutex to protect this session. */ + if (assoc->type == session->exp_message || + assoc->type == WLP_ASSOC_F0) { + if (!memcmp(&session->neighbor_addr, src, + sizeof(*src))) { + session->data = skb; + (session->cb)(wlp); + } else { + dev_err(dev, "Received expected message from " + "unexpected source. Expected message " + "%d or F0 from %02x:%02x, but received " + "it from %02x:%02x. Dropping.\n", + session->exp_message, + session->neighbor_addr.data[1], + session->neighbor_addr.data[0], + src->data[1], src->data[0]); + goto error; + } + } else { + dev_err(dev, "Association already in progress. " + "Dropping.\n"); + goto error; + } + } else { + wlp_direct_assoc_frame(wlp, skb, src); + } + d_fnend(5, dev, "wlp %p\n", wlp); + return; +error: + kfree_skb(skb); + d_fnend(5, dev, "wlp %p\n", wlp); +} + +/** + * Verify incoming frame is from connected neighbor, prep to pass to WLP client + * + * Verification proceeds according to WLP 0.99 [7.3.1]. The source address + * is used to determine which neighbor is sending the frame and the WSS tag + * is used to know to which WSS the frame belongs (we only support one WSS + * so this test is straight forward). + * With the WSS found we need to ensure that we are connected before + * allowing the exchange of data frames. + */ +static +int wlp_verify_prep_rx_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -EINVAL; + struct wlp_eda_node eda_entry; + struct wlp_frame_std_abbrv_hdr *hdr = (void *) skb->data; + + d_fnstart(6, dev, "wlp %p, skb %p \n", wlp, skb); + /*verify*/ + result = wlp_copy_eda_node(&wlp->eda, src, &eda_entry); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Incoming frame is from unknown " + "neighbor %02x:%02x.\n", src->data[1], + src->data[0]); + goto out; + } + if (hdr->tag != eda_entry.tag) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Tag of incoming frame from " + "%02x:%02x does not match expected tag. " + "Received 0x%02x, expected 0x%02x. \n", + src->data[1], src->data[0], hdr->tag, + eda_entry.tag); + result = -EINVAL; + goto out; + } + if (eda_entry.state != WLP_WSS_CONNECTED) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Incoming frame from " + "%02x:%02x does is not from connected WSS.\n", + src->data[1], src->data[0]); + result = -EINVAL; + goto out; + } + /*prep*/ + skb_pull(skb, sizeof(*hdr)); +out: + d_fnend(6, dev, "wlp %p, skb %p, result = %d \n", wlp, skb, result); + return result; +} + +/** + * Receive a WLP frame from device + * + * @returns: 1 if calling function should free the skb + * 0 if it successfully handled skb and freed it + * 0 if error occured, will free skb in this case + */ +int wlp_receive_frame(struct device *dev, struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + unsigned len = skb->len; + void *ptr = skb->data; + struct wlp_frame_hdr *hdr; + int result = 0; + + d_fnstart(6, dev, "skb (%p), len (%u)\n", skb, len); + if (len < sizeof(*hdr)) { + dev_err(dev, "Not enough data to parse WLP header.\n"); + result = -EINVAL; + goto out; + } + hdr = ptr; + d_dump(6, dev, hdr, sizeof(*hdr)); + if (le16_to_cpu(hdr->mux_hdr) != WLP_PROTOCOL_ID) { + dev_err(dev, "Not a WLP frame type.\n"); + result = -EINVAL; + goto out; + } + switch (hdr->type) { + case WLP_FRAME_STANDARD: + if (len < sizeof(struct wlp_frame_std_abbrv_hdr)) { + dev_err(dev, "Not enough data to parse Standard " + "WLP header.\n"); + goto out; + } + result = wlp_verify_prep_rx_frame(wlp, skb, src); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Verification of frame " + "from neighbor %02x:%02x failed.\n", + src->data[1], src->data[0]); + goto out; + } + result = 1; + break; + case WLP_FRAME_ABBREVIATED: + dev_err(dev, "Abbreviated frame received. FIXME?\n"); + kfree_skb(skb); + break; + case WLP_FRAME_CONTROL: + dev_err(dev, "Control frame received. FIXME?\n"); + kfree_skb(skb); + break; + case WLP_FRAME_ASSOCIATION: + if (len < sizeof(struct wlp_frame_assoc)) { + dev_err(dev, "Not enough data to parse Association " + "WLP header.\n"); + goto out; + } + d_printf(5, dev, "Association frame received.\n"); + wlp_receive_assoc_frame(wlp, skb, src); + break; + default: + dev_err(dev, "Invalid frame received.\n"); + result = -EINVAL; + break; + } +out: + if (result < 0) { + kfree_skb(skb); + result = 0; + } + d_fnend(6, dev, "skb (%p)\n", skb); + return result; +} +EXPORT_SYMBOL_GPL(wlp_receive_frame); + + +/** + * Verify frame from network stack, prepare for further transmission + * + * @skb: the socket buffer that needs to be prepared for transmission (it + * is in need of a WLP header). If this is a broadcast frame we take + * over the entire transmission. + * If it is a unicast the WSS connection should already be established + * and transmission will be done by the calling function. + * @dst: On return this will contain the device address to which the + * frame is destined. + * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer, + * calling function can proceed with tx + * 1 on success with tx : WLP will take over transmission of this + * frame + * <0 on error + * + * The network stack (WLP client) is attempting to transmit a frame. We can + * only transmit data if a local WSS is at least active (connection will be + * done here if this is a broadcast frame and neighbor also has the WSS + * active). + * + * The frame can be either broadcast or unicast. Broadcast in a WSS is + * supported via multicast, but we don't support multicast yet (until + * devices start to support MAB IEs). If a broadcast frame needs to be + * transmitted it is treated as a unicast frame to each neighbor. In this + * case the WLP takes over transmission of the skb and returns 1 + * to the caller to indicate so. Also, in this case, if a neighbor has the + * same WSS activated but is not connected then the WSS connection will be + * done at this time. The neighbor's virtual address will be learned at + * this time. + * + * The destination address in a unicast frame is the virtual address of the + * neighbor. This address only becomes known when a WSS connection is + * established. We thus rely on a broadcast frame to trigger the setup of + * WSS connections to all neighbors before we are able to send unicast + * frames to them. This seems reasonable as IP would usually use ARP first + * before any unicast frames are sent. + * + * If we are already connected to the neighbor (neighbor's virtual address + * is known) we just prepare the WLP header and the caller will continue to + * send the frame. + * + * A failure in this function usually indicates something that cannot be + * fixed automatically. So, if this function fails (@return < 0) the calling + * function should not retry to send the frame as it will very likely keep + * failing. + * + */ +int wlp_prepare_tx_frame(struct device *dev, struct wlp *wlp, + struct sk_buff *skb, struct uwb_dev_addr *dst) +{ + int result = -EINVAL; + struct ethhdr *eth_hdr = (void *) skb->data; + + d_fnstart(6, dev, "wlp (%p), skb (%p) \n", wlp, skb); + if (is_broadcast_ether_addr(eth_hdr->h_dest)) { + d_printf(6, dev, "WLP: handling broadcast frame. \n"); + result = wlp_eda_for_each(&wlp->eda, wlp_wss_send_copy, skb); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "Unable to handle broadcast " + "frame from WLP client.\n"); + goto out; + } + dev_kfree_skb_irq(skb); + result = 1; + /* Frame will be transmitted by WLP. */ + } else { + d_printf(6, dev, "WLP: handling unicast frame. \n"); + result = wlp_eda_for_virtual(&wlp->eda, eth_hdr->h_dest, dst, + wlp_wss_prep_hdr, skb); + if (unlikely(result < 0)) { + if (printk_ratelimit()) + dev_err(dev, "Unable to prepare " + "skb for transmission. \n"); + goto out; + } + } +out: + d_fnend(6, dev, "wlp (%p), skb (%p). result = %d \n", wlp, skb, result); + return result; +} +EXPORT_SYMBOL_GPL(wlp_prepare_tx_frame); diff --git a/drivers/uwb/wlp/wlp-internal.h b/drivers/uwb/wlp/wlp-internal.h new file mode 100644 index 000000000000..1c94fabfb1a7 --- /dev/null +++ b/drivers/uwb/wlp/wlp-internal.h @@ -0,0 +1,228 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Internal API + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ + +#ifndef __WLP_INTERNAL_H__ +#define __WLP_INTERNAL_H__ + +/** + * State of WSS connection + * + * A device needs to connect to a neighbor in an activated WSS before data + * can be transmitted. The spec also distinguishes between a new connection + * attempt and a connection attempt after previous connection attempts. The + * state WLP_WSS_CONNECT_FAILED is used for this scenario. See WLP 0.99 + * [7.2.6] + */ +enum wlp_wss_connect { + WLP_WSS_UNCONNECTED = 0, + WLP_WSS_CONNECTED, + WLP_WSS_CONNECT_FAILED, +}; + +extern struct kobj_type wss_ktype; +extern struct attribute_group wss_attr_group; + +extern int uwb_rc_ie_add(struct uwb_rc *, const struct uwb_ie_hdr *, size_t); +extern int uwb_rc_ie_rm(struct uwb_rc *, enum uwb_ie); + + +/* This should be changed to a dynamic array where entries are sorted + * by eth_addr and search is done in a binary form + * + * Although thinking twice about it: this technologie's maximum reach + * is 10 meters...unless you want to pack too much stuff in around + * your radio controller/WLP device, the list will probably not be + * too big. + * + * In any case, there is probably some data structure in the kernel + * than we could reused for that already. + * + * The below structure is really just good while we support one WSS per + * host. + */ +struct wlp_eda_node { + struct list_head list_node; + unsigned char eth_addr[ETH_ALEN]; + struct uwb_dev_addr dev_addr; + struct wlp_wss *wss; + unsigned char virt_addr[ETH_ALEN]; + u8 tag; + enum wlp_wss_connect state; +}; + +typedef int (*wlp_eda_for_each_f)(struct wlp *, struct wlp_eda_node *, void *); + +extern void wlp_eda_init(struct wlp_eda *); +extern void wlp_eda_release(struct wlp_eda *); +extern int wlp_eda_create_node(struct wlp_eda *, + const unsigned char eth_addr[ETH_ALEN], + const struct uwb_dev_addr *); +extern void wlp_eda_rm_node(struct wlp_eda *, const struct uwb_dev_addr *); +extern int wlp_eda_update_node(struct wlp_eda *, + const struct uwb_dev_addr *, + struct wlp_wss *, + const unsigned char virt_addr[ETH_ALEN], + const u8, const enum wlp_wss_connect); +extern int wlp_eda_update_node_state(struct wlp_eda *, + const struct uwb_dev_addr *, + const enum wlp_wss_connect); + +extern int wlp_copy_eda_node(struct wlp_eda *, struct uwb_dev_addr *, + struct wlp_eda_node *); +extern int wlp_eda_for_each(struct wlp_eda *, wlp_eda_for_each_f , void *); +extern int wlp_eda_for_virtual(struct wlp_eda *, + const unsigned char eth_addr[ETH_ALEN], + struct uwb_dev_addr *, + wlp_eda_for_each_f , void *); + + +extern void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *); + +extern size_t wlp_wss_key_print(char *, size_t, u8 *); + +/* Function called when no more references to WSS exists */ +extern void wlp_wss_release(struct kobject *); + +extern void wlp_wss_reset(struct wlp_wss *); +extern int wlp_wss_create_activate(struct wlp_wss *, struct wlp_uuid *, + char *, unsigned, unsigned); +extern int wlp_wss_enroll_activate(struct wlp_wss *, struct wlp_uuid *, + struct uwb_dev_addr *); +extern ssize_t wlp_discover(struct wlp *); + +extern int wlp_enroll_neighbor(struct wlp *, struct wlp_neighbor_e *, + struct wlp_wss *, struct wlp_uuid *); +extern int wlp_wss_is_active(struct wlp *, struct wlp_wss *, + struct uwb_dev_addr *); + +struct wlp_assoc_conn_ctx { + struct work_struct ws; + struct wlp *wlp; + struct sk_buff *skb; + struct wlp_eda_node eda_entry; +}; + + +extern int wlp_wss_connect_prep(struct wlp *, struct wlp_eda_node *, void *); +extern int wlp_wss_send_copy(struct wlp *, struct wlp_eda_node *, void *); + + +/* Message handling */ +struct wlp_assoc_frame_ctx { + struct work_struct ws; + struct wlp *wlp; + struct sk_buff *skb; + struct uwb_dev_addr src; +}; + +extern int wlp_wss_prep_hdr(struct wlp *, struct wlp_eda_node *, void *); +extern void wlp_handle_d1_frame(struct work_struct *); +extern int wlp_parse_d2_frame_to_cache(struct wlp *, struct sk_buff *, + struct wlp_neighbor_e *); +extern int wlp_parse_d2_frame_to_enroll(struct wlp_wss *, struct sk_buff *, + struct wlp_neighbor_e *, + struct wlp_uuid *); +extern void wlp_handle_c1_frame(struct work_struct *); +extern void wlp_handle_c3_frame(struct work_struct *); +extern int wlp_parse_c3c4_frame(struct wlp *, struct sk_buff *, + struct wlp_uuid *, u8 *, + struct uwb_mac_addr *); +extern int wlp_parse_f0(struct wlp *, struct sk_buff *); +extern int wlp_send_assoc_frame(struct wlp *, struct wlp_wss *, + struct uwb_dev_addr *, enum wlp_assoc_type); +extern ssize_t wlp_get_version(struct wlp *, struct wlp_attr_version *, + u8 *, ssize_t); +extern ssize_t wlp_get_wssid(struct wlp *, struct wlp_attr_wssid *, + struct wlp_uuid *, ssize_t); +extern int __wlp_alloc_device_info(struct wlp *); +extern int __wlp_setup_device_info(struct wlp *); + +extern struct wlp_wss_attribute wss_attribute_properties; +extern struct wlp_wss_attribute wss_attribute_members; +extern struct wlp_wss_attribute wss_attribute_state; + +static inline +size_t wlp_wss_uuid_print(char *buf, size_t bufsize, struct wlp_uuid *uuid) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x:%02x:%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x", + uuid->data[0], uuid->data[1], + uuid->data[2], uuid->data[3], + uuid->data[4], uuid->data[5], + uuid->data[6], uuid->data[7], + uuid->data[8], uuid->data[9], + uuid->data[10], uuid->data[11], + uuid->data[12], uuid->data[13], + uuid->data[14], uuid->data[15]); + return result; +} + +/** + * FIXME: How should a nonce be displayed? + */ +static inline +size_t wlp_wss_nonce_print(char *buf, size_t bufsize, struct wlp_nonce *nonce) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x", + nonce->data[0], nonce->data[1], + nonce->data[2], nonce->data[3], + nonce->data[4], nonce->data[5], + nonce->data[6], nonce->data[7], + nonce->data[8], nonce->data[9], + nonce->data[10], nonce->data[11], + nonce->data[12], nonce->data[13], + nonce->data[14], nonce->data[15]); + return result; +} + + +static inline +void wlp_session_cb(struct wlp *wlp) +{ + struct completion *completion = wlp->session->cb_priv; + complete(completion); +} + +static inline +int wlp_uuid_is_set(struct wlp_uuid *uuid) +{ + struct wlp_uuid zero_uuid = { .data = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00} }; + + if (!memcmp(uuid, &zero_uuid, sizeof(*uuid))) + return 0; + return 1; +} + +#endif /* __WLP_INTERNAL_H__ */ diff --git a/drivers/uwb/wlp/wlp-lc.c b/drivers/uwb/wlp/wlp-lc.c new file mode 100644 index 000000000000..0799402e73fb --- /dev/null +++ b/drivers/uwb/wlp/wlp-lc.c @@ -0,0 +1,585 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2005-2006 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/wlp.h> +#define D_LOCAL 6 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +static +void wlp_neighbor_init(struct wlp_neighbor_e *neighbor) +{ + INIT_LIST_HEAD(&neighbor->wssid); +} + +/** + * Create area for device information storage + * + * wlp->mutex must be held + */ +int __wlp_alloc_device_info(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + BUG_ON(wlp->dev_info != NULL); + wlp->dev_info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL); + if (wlp->dev_info == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for " + "device information.\n"); + return -ENOMEM; + } + return 0; +} + + +/** + * Fill in device information using function provided by driver + * + * wlp->mutex must be held + */ +static +void __wlp_fill_device_info(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + + BUG_ON(wlp->fill_device_info == NULL); + d_printf(6, dev, "Retrieving device information " + "from device driver.\n"); + wlp->fill_device_info(wlp, wlp->dev_info); +} + +/** + * Setup device information + * + * Allocate area for device information and populate it. + * + * wlp->mutex must be held + */ +int __wlp_setup_device_info(struct wlp *wlp) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + + result = __wlp_alloc_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to allocate area for " + "device information.\n"); + return result; + } + __wlp_fill_device_info(wlp); + return 0; +} + +/** + * Remove information about neighbor stored temporarily + * + * Information learned during discovey should only be stored when the + * device enrolls in the neighbor's WSS. We do need to store this + * information temporarily in order to present it to the user. + * + * We are only interested in keeping neighbor WSS information if that + * neighbor is accepting enrollment. + * + * should be called with wlp->nbmutex held + */ +void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *neighbor) +{ + struct wlp_wssid_e *wssid_e, *next; + u8 keep; + if (!list_empty(&neighbor->wssid)) { + list_for_each_entry_safe(wssid_e, next, &neighbor->wssid, + node) { + if (wssid_e->info != NULL) { + keep = wssid_e->info->accept_enroll; + kfree(wssid_e->info); + wssid_e->info = NULL; + if (!keep) { + list_del(&wssid_e->node); + kfree(wssid_e); + } + } + } + } + if (neighbor->info != NULL) { + kfree(neighbor->info); + neighbor->info = NULL; + } +} + +/** + * Populate WLP neighborhood cache with neighbor information + * + * A new neighbor is found. If it is discoverable then we add it to the + * neighborhood cache. + * + */ +static +int wlp_add_neighbor(struct wlp *wlp, struct uwb_dev *dev) +{ + int result = 0; + int discoverable; + struct wlp_neighbor_e *neighbor; + + d_fnstart(6, &dev->dev, "uwb %p \n", dev); + d_printf(6, &dev->dev, "Found neighbor device %02x:%02x \n", + dev->dev_addr.data[1], dev->dev_addr.data[0]); + /** + * FIXME: + * Use contents of WLP IE found in beacon cache to determine if + * neighbor is discoverable. + * The device does not support WLP IE yet so this still needs to be + * done. Until then we assume all devices are discoverable. + */ + discoverable = 1; /* will be changed when FIXME disappears */ + if (discoverable) { + /* Add neighbor to cache for discovery */ + neighbor = kzalloc(sizeof(*neighbor), GFP_KERNEL); + if (neighbor == NULL) { + dev_err(&dev->dev, "Unable to create memory for " + "new neighbor. \n"); + result = -ENOMEM; + goto error_no_mem; + } + wlp_neighbor_init(neighbor); + uwb_dev_get(dev); + neighbor->uwb_dev = dev; + list_add(&neighbor->node, &wlp->neighbors); + } +error_no_mem: + d_fnend(6, &dev->dev, "uwb %p, result = %d \n", dev, result); + return result; +} + +/** + * Remove one neighbor from cache + */ +static +void __wlp_neighbor_release(struct wlp_neighbor_e *neighbor) +{ + struct wlp_wssid_e *wssid_e, *next_wssid_e; + + list_for_each_entry_safe(wssid_e, next_wssid_e, + &neighbor->wssid, node) { + list_del(&wssid_e->node); + kfree(wssid_e); + } + uwb_dev_put(neighbor->uwb_dev); + list_del(&neighbor->node); + kfree(neighbor); +} + +/** + * Clear entire neighborhood cache. + */ +static +void __wlp_neighbors_release(struct wlp *wlp) +{ + struct wlp_neighbor_e *neighbor, *next; + if (list_empty(&wlp->neighbors)) + return; + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { + __wlp_neighbor_release(neighbor); + } +} + +static +void wlp_neighbors_release(struct wlp *wlp) +{ + mutex_lock(&wlp->nbmutex); + __wlp_neighbors_release(wlp); + mutex_unlock(&wlp->nbmutex); +} + + + +/** + * Send D1 message to neighbor, receive D2 message + * + * @neighbor: neighbor to which D1 message will be sent + * @wss: if not NULL, it is an enrollment request for this WSS + * @wssid: if wss not NULL, this is the wssid of the WSS in which we + * want to enroll + * + * A D1/D2 exchange is done for one of two reasons: discovery or + * enrollment. If done for discovery the D1 message is sent to the neighbor + * and the contents of the D2 response is stored in a temporary cache. + * If done for enrollment the @wss and @wssid are provided also. In this + * case the D1 message is sent to the neighbor, the D2 response is parsed + * for enrollment of the WSS with wssid. + * + * &wss->mutex is held + */ +static +int wlp_d1d2_exchange(struct wlp *wlp, struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct sk_buff *skb; + struct wlp_frame_assoc *resp; + struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; + + mutex_lock(&wlp->mutex); + if (!wlp_uuid_is_set(&wlp->uuid)) { + dev_err(dev, "WLP: UUID is not set. Set via sysfs to " + "proceed.\n"); + result = -ENXIO; + goto out; + } + /* Send D1 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_D1); + if (result < 0) { + dev_err(dev, "Unable to send D1 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + d_printf(6, dev, "Add placeholders into buffer next to " + "neighbor information we have (dev address).\n"); + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_D2; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for D2/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + result = -ETIMEDOUT; + dev_err(dev, "Timeout while sending D1 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto error_session; + } + if (result < 0) { + dev_err(dev, "Unable to discover/enroll neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_session; + } + /* Parse message in session->data: it will be either D2 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(6, dev, "Received response to D1 frame. \n"); + d_dump(6, dev, skb->data, skb->len > 72 ? 72 : skb->len); + + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: Unable to parse F0 from neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + result = -EINVAL; + goto error_resp_parse; + } + if (wss == NULL) { + /* Discovery */ + result = wlp_parse_d2_frame_to_cache(wlp, skb, neighbor); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse D2 message from " + "neighbor %02x:%02x for discovery.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_resp_parse; + } + } else { + /* Enrollment */ + result = wlp_parse_d2_frame_to_enroll(wss, skb, neighbor, + wssid); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse D2 message from " + "neighbor %02x:%02x for enrollment.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_resp_parse; + } + } +error_resp_parse: + kfree_skb(skb); +error_session: + wlp->session = NULL; +out: + mutex_unlock(&wlp->mutex); + return result; +} + +/** + * Enroll into WSS of provided WSSID by using neighbor as registrar + * + * &wss->mutex is held + */ +int wlp_enroll_neighbor(struct wlp *wlp, struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n", + wlp, neighbor, wss, wssid, buf); + d_printf(6, dev, "Complete me.\n"); + result = wlp_d1d2_exchange(wlp, neighbor, wss, wssid); + if (result < 0) { + dev_err(dev, "WLP: D1/D2 message exchange for enrollment " + "failed. result = %d \n", result); + goto out; + } + if (wss->state != WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: Unable to enroll into WSS %s using " + "neighbor %02x:%02x. \n", buf, + dev_addr->data[1], dev_addr->data[0]); + result = -EINVAL; + goto out; + } + if (wss->secure_status == WLP_WSS_SECURE) { + dev_err(dev, "FIXME: need to complete secure enrollment.\n"); + result = -EINVAL; + goto error; + } else { + wss->state = WLP_WSS_STATE_ENROLLED; + d_printf(2, dev, "WLP: Success Enrollment into unsecure WSS " + "%s using neighbor %02x:%02x. \n", buf, + dev_addr->data[1], dev_addr->data[0]); + } + + d_fnend(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n", + wlp, neighbor, wss, wssid, buf); +out: + return result; +error: + wlp_wss_reset(wss); + return result; +} + +/** + * Discover WSS information of neighbor's active WSS + */ +static +int wlp_discover_neighbor(struct wlp *wlp, + struct wlp_neighbor_e *neighbor) +{ + return wlp_d1d2_exchange(wlp, neighbor, NULL, NULL); +} + + +/** + * Each neighbor in the neighborhood cache is discoverable. Discover it. + * + * Discovery is done through sending of D1 association frame and parsing + * the D2 association frame response. Only wssid from D2 will be included + * in neighbor cache, rest is just displayed to user and forgotten. + * + * The discovery is not done in parallel. This is simple and enables us to + * maintain only one association context. + * + * The discovery of one neighbor does not affect the other, but if the + * discovery of a neighbor fails it is removed from the neighborhood cache. + */ +static +int wlp_discover_all_neighbors(struct wlp *wlp) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor, *next; + + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { + result = wlp_discover_neighbor(wlp, neighbor); + if (result < 0) { + dev_err(dev, "WLP: Unable to discover neighbor " + "%02x:%02x, removing from neighborhood. \n", + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + __wlp_neighbor_release(neighbor); + } + } + return result; +} + +static int wlp_add_neighbor_helper(struct device *dev, void *priv) +{ + struct wlp *wlp = priv; + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + return wlp_add_neighbor(wlp, uwb_dev); +} + +/** + * Discover WLP neighborhood + * + * Will send D1 association frame to all devices in beacon group that have + * discoverable bit set in WLP IE. D2 frames will be received, information + * displayed to user in @buf. Partial information (from D2 association + * frame) will be cached to assist with future association + * requests. + * + * The discovery of the WLP neighborhood is triggered by the user. This + * should occur infrequently and we thus free current cache and re-allocate + * memory if needed. + * + * If one neighbor fails during initial discovery (determining if it is a + * neighbor or not), we fail all - note that interaction with neighbor has + * not occured at this point so if a failure occurs we know something went wrong + * locally. We thus undo everything. + */ +ssize_t wlp_discover(struct wlp *wlp) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + + d_fnstart(6, dev, "wlp %p \n", wlp); + mutex_lock(&wlp->nbmutex); + /* Clear current neighborhood cache. */ + __wlp_neighbors_release(wlp); + /* Determine which devices in neighborhood. Repopulate cache. */ + result = uwb_dev_for_each(wlp->rc, wlp_add_neighbor_helper, wlp); + if (result < 0) { + /* May have partial neighbor information, release all. */ + __wlp_neighbors_release(wlp); + goto error_dev_for_each; + } + /* Discover the properties of devices in neighborhood. */ + result = wlp_discover_all_neighbors(wlp); + /* In case of failure we still print our partial results. */ + if (result < 0) { + dev_err(dev, "Unable to fully discover neighborhood. \n"); + result = 0; + } +error_dev_for_each: + mutex_unlock(&wlp->nbmutex); + d_fnend(6, dev, "wlp %p \n", wlp); + return result; +} + +/** + * Handle events from UWB stack + * + * We handle events conservatively. If a neighbor goes off the air we + * remove it from the neighborhood. If an association process is in + * progress this function will block waiting for the nbmutex to become + * free. The association process will thus be allowed to complete before it + * is removed. + */ +static +void wlp_uwb_notifs_cb(void *_wlp, struct uwb_dev *uwb_dev, + enum uwb_notifs event) +{ + struct wlp *wlp = _wlp; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor, *next; + int result; + switch (event) { + case UWB_NOTIF_ONAIR: + d_printf(6, dev, "UWB device %02x:%02x is onair\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + result = wlp_eda_create_node(&wlp->eda, + uwb_dev->mac_addr.data, + &uwb_dev->dev_addr); + if (result < 0) + dev_err(dev, "WLP: Unable to add new neighbor " + "%02x:%02x to EDA cache.\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + break; + case UWB_NOTIF_OFFAIR: + d_printf(6, dev, "UWB device %02x:%02x is offair\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + wlp_eda_rm_node(&wlp->eda, &uwb_dev->dev_addr); + mutex_lock(&wlp->nbmutex); + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, + node) { + if (neighbor->uwb_dev == uwb_dev) { + d_printf(6, dev, "Removing device from " + "neighborhood.\n"); + __wlp_neighbor_release(neighbor); + } + } + mutex_unlock(&wlp->nbmutex); + break; + default: + dev_err(dev, "don't know how to handle event %d from uwb\n", + event); + } +} + +int wlp_setup(struct wlp *wlp, struct uwb_rc *rc) +{ + struct device *dev = &rc->uwb_dev.dev; + int result; + + d_fnstart(6, dev, "wlp %p\n", wlp); + BUG_ON(wlp->fill_device_info == NULL); + BUG_ON(wlp->xmit_frame == NULL); + BUG_ON(wlp->stop_queue == NULL); + BUG_ON(wlp->start_queue == NULL); + wlp->rc = rc; + wlp_eda_init(&wlp->eda);/* Set up address cache */ + wlp->uwb_notifs_handler.cb = wlp_uwb_notifs_cb; + wlp->uwb_notifs_handler.data = wlp; + uwb_notifs_register(rc, &wlp->uwb_notifs_handler); + + uwb_pal_init(&wlp->pal); + result = uwb_pal_register(rc, &wlp->pal); + if (result < 0) + uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); + + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} +EXPORT_SYMBOL_GPL(wlp_setup); + +void wlp_remove(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(6, dev, "wlp %p\n", wlp); + wlp_neighbors_release(wlp); + uwb_pal_unregister(wlp->rc, &wlp->pal); + uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); + wlp_eda_release(&wlp->eda); + mutex_lock(&wlp->mutex); + if (wlp->dev_info != NULL) + kfree(wlp->dev_info); + mutex_unlock(&wlp->mutex); + wlp->rc = NULL; + /* We have to use NULL here because this function can be called + * when the device disappeared. */ + d_fnend(6, NULL, "wlp %p\n", wlp); +} +EXPORT_SYMBOL_GPL(wlp_remove); + +/** + * wlp_reset_all - reset the WLP hardware + * @wlp: the WLP device to reset. + * + * This schedules a full hardware reset of the WLP device. The radio + * controller and any other PALs will also be reset. + */ +void wlp_reset_all(struct wlp *wlp) +{ + uwb_rc_reset_all(wlp->rc); +} +EXPORT_SYMBOL_GPL(wlp_reset_all); |