diff options
Diffstat (limited to 'drivers/video/omap')
-rw-r--r-- | drivers/video/omap/Kconfig | 8 | ||||
-rw-r--r-- | drivers/video/omap/Makefile | 1 | ||||
-rw-r--r-- | drivers/video/omap/lcd_mipid.c | 625 |
3 files changed, 634 insertions, 0 deletions
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig index 44408850e2eb..574453f49e2b 100644 --- a/drivers/video/omap/Kconfig +++ b/drivers/video/omap/Kconfig @@ -7,6 +7,14 @@ config FB_OMAP help Frame buffer driver for OMAP based boards. +config FB_OMAP_LCD_MIPID + bool "MIPI DBI-C/DCS compatible LCD support" + depends on FB_OMAP && SPI_MASTER + help + Say Y here if you want to have support for LCDs compatible with + the Mobile Industry Processor Interface DBI-C/DCS + specification. (Supported LCDs: Philips LPH8923, Sharp LS041Y3) + config FB_OMAP_BOOTLOADER_INIT bool "Check bootloader initialization" depends on FB_OMAP diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index d0534982f6d8..d86d54a63a65 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -25,6 +25,7 @@ objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o +objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o omapfb-objs := $(objs-yy) diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c new file mode 100644 index 000000000000..918ee8934196 --- /dev/null +++ b/drivers/video/omap/lcd_mipid.c @@ -0,0 +1,625 @@ +/* + * LCD driver for MIPI DBI-C / DCS compatible LCDs + * + * Copyright (C) 2006 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/spi/spi.h> + +#include <mach/omapfb.h> +#include <mach/lcd_mipid.h> + +#define MIPID_MODULE_NAME "lcd_mipid" + +#define MIPID_CMD_READ_DISP_ID 0x04 +#define MIPID_CMD_READ_RED 0x06 +#define MIPID_CMD_READ_GREEN 0x07 +#define MIPID_CMD_READ_BLUE 0x08 +#define MIPID_CMD_READ_DISP_STATUS 0x09 +#define MIPID_CMD_RDDSDR 0x0F +#define MIPID_CMD_SLEEP_IN 0x10 +#define MIPID_CMD_SLEEP_OUT 0x11 +#define MIPID_CMD_DISP_OFF 0x28 +#define MIPID_CMD_DISP_ON 0x29 + +#define MIPID_ESD_CHECK_PERIOD msecs_to_jiffies(5000) + +#define to_mipid_device(p) container_of(p, struct mipid_device, \ + panel) +struct mipid_device { + int enabled; + int revision; + unsigned int saved_bklight_level; + unsigned long hw_guard_end; /* next value of jiffies + when we can issue the + next sleep in/out command */ + unsigned long hw_guard_wait; /* max guard time in jiffies */ + + struct omapfb_device *fbdev; + struct spi_device *spi; + struct mutex mutex; + struct lcd_panel panel; + + struct workqueue_struct *esd_wq; + struct delayed_work esd_work; + void (*esd_check)(struct mipid_device *m); +}; + +static void mipid_transfer(struct mipid_device *md, int cmd, const u8 *wbuf, + int wlen, u8 *rbuf, int rlen) +{ + struct spi_message m; + struct spi_transfer *x, xfer[4]; + u16 w; + int r; + + BUG_ON(md->spi == NULL); + + spi_message_init(&m); + + memset(xfer, 0, sizeof(xfer)); + x = &xfer[0]; + + cmd &= 0xff; + x->tx_buf = &cmd; + x->bits_per_word = 9; + x->len = 2; + spi_message_add_tail(x, &m); + + if (wlen) { + x++; + x->tx_buf = wbuf; + x->len = wlen; + x->bits_per_word = 9; + spi_message_add_tail(x, &m); + } + + if (rlen) { + x++; + x->rx_buf = &w; + x->len = 1; + spi_message_add_tail(x, &m); + + if (rlen > 1) { + /* Arrange for the extra clock before the first + * data bit. + */ + x->bits_per_word = 9; + x->len = 2; + + x++; + x->rx_buf = &rbuf[1]; + x->len = rlen - 1; + spi_message_add_tail(x, &m); + } + } + + r = spi_sync(md->spi, &m); + if (r < 0) + dev_dbg(&md->spi->dev, "spi_sync %d\n", r); + + if (rlen) + rbuf[0] = w & 0xff; +} + +static inline void mipid_cmd(struct mipid_device *md, int cmd) +{ + mipid_transfer(md, cmd, NULL, 0, NULL, 0); +} + +static inline void mipid_write(struct mipid_device *md, + int reg, const u8 *buf, int len) +{ + mipid_transfer(md, reg, buf, len, NULL, 0); +} + +static inline void mipid_read(struct mipid_device *md, + int reg, u8 *buf, int len) +{ + mipid_transfer(md, reg, NULL, 0, buf, len); +} + +static void set_data_lines(struct mipid_device *md, int data_lines) +{ + u16 par; + + switch (data_lines) { + case 16: + par = 0x150; + break; + case 18: + par = 0x160; + break; + case 24: + par = 0x170; + break; + } + mipid_write(md, 0x3a, (u8 *)&par, 2); +} + +static void send_init_string(struct mipid_device *md) +{ + u16 initpar[] = { 0x0102, 0x0100, 0x0100 }; + + mipid_write(md, 0xc2, (u8 *)initpar, sizeof(initpar)); + set_data_lines(md, md->panel.data_lines); +} + +static void hw_guard_start(struct mipid_device *md, int guard_msec) +{ + md->hw_guard_wait = msecs_to_jiffies(guard_msec); + md->hw_guard_end = jiffies + md->hw_guard_wait; +} + +static void hw_guard_wait(struct mipid_device *md) +{ + unsigned long wait = md->hw_guard_end - jiffies; + + if ((long)wait > 0 && wait <= md->hw_guard_wait) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(wait); + } +} + +static void set_sleep_mode(struct mipid_device *md, int on) +{ + int cmd, sleep_time = 50; + + if (on) + cmd = MIPID_CMD_SLEEP_IN; + else + cmd = MIPID_CMD_SLEEP_OUT; + hw_guard_wait(md); + mipid_cmd(md, cmd); + hw_guard_start(md, 120); + /* + * When we enable the panel, it seems we _have_ to sleep + * 120 ms before sending the init string. When disabling the + * panel we'll sleep for the duration of 2 frames, so that the + * controller can still provide the PCLK,HS,VS signals. + */ + if (!on) + sleep_time = 120; + msleep(sleep_time); +} + +static void set_display_state(struct mipid_device *md, int enabled) +{ + int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF; + + mipid_cmd(md, cmd); +} + +static int mipid_set_bklight_level(struct lcd_panel *panel, unsigned int level) +{ + struct mipid_device *md = to_mipid_device(panel); + struct mipid_platform_data *pd = md->spi->dev.platform_data; + + if (pd->get_bklight_max == NULL || pd->set_bklight_level == NULL) + return -ENODEV; + if (level > pd->get_bklight_max(pd)) + return -EINVAL; + if (!md->enabled) { + md->saved_bklight_level = level; + return 0; + } + pd->set_bklight_level(pd, level); + + return 0; +} + +static unsigned int mipid_get_bklight_level(struct lcd_panel *panel) +{ + struct mipid_device *md = to_mipid_device(panel); + struct mipid_platform_data *pd = md->spi->dev.platform_data; + + if (pd->get_bklight_level == NULL) + return -ENODEV; + return pd->get_bklight_level(pd); +} + +static unsigned int mipid_get_bklight_max(struct lcd_panel *panel) +{ + struct mipid_device *md = to_mipid_device(panel); + struct mipid_platform_data *pd = md->spi->dev.platform_data; + + if (pd->get_bklight_max == NULL) + return -ENODEV; + + return pd->get_bklight_max(pd); +} + +static unsigned long mipid_get_caps(struct lcd_panel *panel) +{ + return OMAPFB_CAPS_SET_BACKLIGHT; +} + +static u16 read_first_pixel(struct mipid_device *md) +{ + u16 pixel; + u8 red, green, blue; + + mutex_lock(&md->mutex); + mipid_read(md, MIPID_CMD_READ_RED, &red, 1); + mipid_read(md, MIPID_CMD_READ_GREEN, &green, 1); + mipid_read(md, MIPID_CMD_READ_BLUE, &blue, 1); + mutex_unlock(&md->mutex); + + switch (md->panel.data_lines) { + case 16: + pixel = ((red >> 1) << 11) | (green << 5) | (blue >> 1); + break; + case 24: + /* 24 bit -> 16 bit */ + pixel = ((red >> 3) << 11) | ((green >> 2) << 5) | + (blue >> 3); + break; + default: + pixel = 0; + BUG(); + } + + return pixel; +} + +static int mipid_run_test(struct lcd_panel *panel, int test_num) +{ + struct mipid_device *md = to_mipid_device(panel); + static const u16 test_values[4] = { + 0x0000, 0xffff, 0xaaaa, 0x5555, + }; + int i; + + if (test_num != MIPID_TEST_RGB_LINES) + return MIPID_TEST_INVALID; + + for (i = 0; i < ARRAY_SIZE(test_values); i++) { + int delay; + unsigned long tmo; + + omapfb_write_first_pixel(md->fbdev, test_values[i]); + tmo = jiffies + msecs_to_jiffies(100); + delay = 25; + while (1) { + u16 pixel; + + msleep(delay); + pixel = read_first_pixel(md); + if (pixel == test_values[i]) + break; + if (time_after(jiffies, tmo)) { + dev_err(&md->spi->dev, + "MIPI LCD RGB I/F test failed: " + "expecting %04x, got %04x\n", + test_values[i], pixel); + return MIPID_TEST_FAILED; + } + delay = 10; + } + } + + return 0; +} + +static void ls041y3_esd_recover(struct mipid_device *md) +{ + dev_err(&md->spi->dev, "performing LCD ESD recovery\n"); + set_sleep_mode(md, 1); + set_sleep_mode(md, 0); +} + +static void ls041y3_esd_check_mode1(struct mipid_device *md) +{ + u8 state1, state2; + + mipid_read(md, MIPID_CMD_RDDSDR, &state1, 1); + set_sleep_mode(md, 0); + mipid_read(md, MIPID_CMD_RDDSDR, &state2, 1); + dev_dbg(&md->spi->dev, "ESD mode 1 state1 %02x state2 %02x\n", + state1, state2); + /* Each sleep out command will trigger a self diagnostic and flip + * Bit6 if the test passes. + */ + if (!((state1 ^ state2) & (1 << 6))) + ls041y3_esd_recover(md); +} + +static void ls041y3_esd_check_mode2(struct mipid_device *md) +{ + int i; + u8 rbuf[2]; + static const struct { + int cmd; + int wlen; + u16 wbuf[3]; + } *rd, rd_ctrl[7] = { + { 0xb0, 4, { 0x0101, 0x01fe, } }, + { 0xb1, 4, { 0x01de, 0x0121, } }, + { 0xc2, 4, { 0x0100, 0x0100, } }, + { 0xbd, 2, { 0x0100, } }, + { 0xc2, 4, { 0x01fc, 0x0103, } }, + { 0xb4, 0, }, + { 0x00, 0, }, + }; + + rd = rd_ctrl; + for (i = 0; i < 3; i++, rd++) + mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen); + + udelay(10); + mipid_read(md, rd->cmd, rbuf, 2); + rd++; + + for (i = 0; i < 3; i++, rd++) { + udelay(10); + mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen); + } + + dev_dbg(&md->spi->dev, "ESD mode 2 state %02x\n", rbuf[1]); + if (rbuf[1] == 0x00) + ls041y3_esd_recover(md); +} + +static void ls041y3_esd_check(struct mipid_device *md) +{ + ls041y3_esd_check_mode1(md); + if (md->revision >= 0x88) + ls041y3_esd_check_mode2(md); +} + +static void mipid_esd_start_check(struct mipid_device *md) +{ + if (md->esd_check != NULL) + queue_delayed_work(md->esd_wq, &md->esd_work, + MIPID_ESD_CHECK_PERIOD); +} + +static void mipid_esd_stop_check(struct mipid_device *md) +{ + if (md->esd_check != NULL) + cancel_rearming_delayed_workqueue(md->esd_wq, &md->esd_work); +} + +static void mipid_esd_work(struct work_struct *work) +{ + struct mipid_device *md = container_of(work, struct mipid_device, + esd_work.work); + + mutex_lock(&md->mutex); + md->esd_check(md); + mutex_unlock(&md->mutex); + mipid_esd_start_check(md); +} + +static int mipid_enable(struct lcd_panel *panel) +{ + struct mipid_device *md = to_mipid_device(panel); + + mutex_lock(&md->mutex); + + if (md->enabled) { + mutex_unlock(&md->mutex); + return 0; + } + set_sleep_mode(md, 0); + md->enabled = 1; + send_init_string(md); + set_display_state(md, 1); + mipid_set_bklight_level(panel, md->saved_bklight_level); + mipid_esd_start_check(md); + + mutex_unlock(&md->mutex); + return 0; +} + +static void mipid_disable(struct lcd_panel *panel) +{ + struct mipid_device *md = to_mipid_device(panel); + + /* + * A final ESD work might be called before returning, + * so do this without holding the lock. + */ + mipid_esd_stop_check(md); + mutex_lock(&md->mutex); + + if (!md->enabled) { + mutex_unlock(&md->mutex); + return; + } + md->saved_bklight_level = mipid_get_bklight_level(panel); + mipid_set_bklight_level(panel, 0); + set_display_state(md, 0); + set_sleep_mode(md, 1); + md->enabled = 0; + + mutex_unlock(&md->mutex); +} + +static int panel_enabled(struct mipid_device *md) +{ + u32 disp_status; + int enabled; + + mipid_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4); + disp_status = __be32_to_cpu(disp_status); + enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10)); + dev_dbg(&md->spi->dev, + "LCD panel %senabled by bootloader (status 0x%04x)\n", + enabled ? "" : "not ", disp_status); + return enabled; +} + +static int mipid_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +{ + struct mipid_device *md = to_mipid_device(panel); + + md->fbdev = fbdev; + md->esd_wq = create_singlethread_workqueue("mipid_esd"); + if (md->esd_wq == NULL) { + dev_err(&md->spi->dev, "can't create ESD workqueue\n"); + return -ENOMEM; + } + INIT_DELAYED_WORK(&md->esd_work, mipid_esd_work); + mutex_init(&md->mutex); + + md->enabled = panel_enabled(md); + + if (md->enabled) + mipid_esd_start_check(md); + else + md->saved_bklight_level = mipid_get_bklight_level(panel); + + return 0; +} + +static void mipid_cleanup(struct lcd_panel *panel) +{ + struct mipid_device *md = to_mipid_device(panel); + + if (md->enabled) + mipid_esd_stop_check(md); + destroy_workqueue(md->esd_wq); +} + +static struct lcd_panel mipid_panel = { + .config = OMAP_LCDC_PANEL_TFT, + + .bpp = 16, + .x_res = 800, + .y_res = 480, + .pixel_clock = 21940, + .hsw = 50, + .hfp = 20, + .hbp = 15, + .vsw = 2, + .vfp = 1, + .vbp = 3, + + .init = mipid_init, + .cleanup = mipid_cleanup, + .enable = mipid_enable, + .disable = mipid_disable, + .get_caps = mipid_get_caps, + .set_bklight_level = mipid_set_bklight_level, + .get_bklight_level = mipid_get_bklight_level, + .get_bklight_max = mipid_get_bklight_max, + .run_test = mipid_run_test, +}; + +static int mipid_detect(struct mipid_device *md) +{ + struct mipid_platform_data *pdata; + u8 display_id[3]; + + pdata = md->spi->dev.platform_data; + if (pdata == NULL) { + dev_err(&md->spi->dev, "missing platform data\n"); + return -ENOENT; + } + + mipid_read(md, MIPID_CMD_READ_DISP_ID, display_id, 3); + dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n", + display_id[0], display_id[1], display_id[2]); + + switch (display_id[0]) { + case 0x45: + md->panel.name = "lph8923"; + break; + case 0x83: + md->panel.name = "ls041y3"; + md->esd_check = ls041y3_esd_check; + break; + default: + md->panel.name = "unknown"; + dev_err(&md->spi->dev, "invalid display ID\n"); + return -ENODEV; + } + + md->revision = display_id[1]; + md->panel.data_lines = pdata->data_lines; + pr_info("omapfb: %s rev %02x LCD detected, %d data lines\n", + md->panel.name, md->revision, md->panel.data_lines); + + return 0; +} + +static int mipid_spi_probe(struct spi_device *spi) +{ + struct mipid_device *md; + int r; + + md = kzalloc(sizeof(*md), GFP_KERNEL); + if (md == NULL) { + dev_err(&spi->dev, "out of memory\n"); + return -ENOMEM; + } + + spi->mode = SPI_MODE_0; + md->spi = spi; + dev_set_drvdata(&spi->dev, md); + md->panel = mipid_panel; + + r = mipid_detect(md); + if (r < 0) + return r; + + omapfb_register_panel(&md->panel); + + return 0; +} + +static int mipid_spi_remove(struct spi_device *spi) +{ + struct mipid_device *md = dev_get_drvdata(&spi->dev); + + mipid_disable(&md->panel); + kfree(md); + + return 0; +} + +static struct spi_driver mipid_spi_driver = { + .driver = { + .name = MIPID_MODULE_NAME, + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = mipid_spi_probe, + .remove = __devexit_p(mipid_spi_remove), +}; + +static int mipid_drv_init(void) +{ + spi_register_driver(&mipid_spi_driver); + + return 0; +} +module_init(mipid_drv_init); + +static void mipid_drv_cleanup(void) +{ + spi_unregister_driver(&mipid_spi_driver); +} +module_exit(mipid_drv_cleanup); + +MODULE_DESCRIPTION("MIPI display driver"); +MODULE_LICENSE("GPL"); |