aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/input/keyboard/cros_ec_keyb.c1
-rw-r--r--drivers/input/misc/cm109.c7
-rw-r--r--drivers/input/misc/soc_button_array.c11
-rw-r--r--drivers/input/serio/i8042-x86ia64io.h42
-rw-r--r--drivers/input/touchscreen/goodix.c12
-rw-r--r--drivers/input/touchscreen/raydium_i2c_ts.c126
6 files changed, 159 insertions, 40 deletions
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index 15d17c717081..1f0d61b3c213 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -183,6 +183,7 @@ static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
"changed: [r%d c%d]: byte %02x\n",
row, col, new_state);
+ input_event(idev, EV_MSC, MSC_SCAN, pos);
input_report_key(idev, keycodes[pos],
new_state);
}
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index e413801f0491..f515fae465c3 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -568,12 +568,15 @@ static int cm109_input_open(struct input_dev *idev)
dev->ctl_data->byte[HID_OR2] = dev->keybit;
dev->ctl_data->byte[HID_OR3] = 0x00;
+ dev->ctl_urb_pending = 1;
error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
- if (error)
+ if (error) {
+ dev->ctl_urb_pending = 0;
dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
__func__, error);
- else
+ } else {
dev->open = 1;
+ }
mutex_unlock(&dev->pm_mutex);
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index d14a65683c5e..cb6ec59a045d 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -83,6 +83,17 @@ static const struct dmi_system_id dmi_use_low_level_irq[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "One S1003"),
},
},
+ {
+ /*
+ * Lenovo Yoga Tab2 1051L, something messes with the home-button
+ * IRQ settings, leading to a non working home-button.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "60073"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "1051L"),
+ },
+ },
{} /* Terminating entry */
};
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 7ecb65176c1a..3a2dcf0805f1 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -612,6 +612,48 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
},
},
{
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A114-31"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A314-31"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A315-31"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-132"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-332"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire ES1-432"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate Spin B118-RN"),
+ },
+ },
+ {
/* Advent 4211 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"),
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 02c75ea385e0..6612f9e2d7e8 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -193,6 +193,18 @@ static const struct dmi_system_id rotated_screen[] = {
},
},
{
+ .ident = "Teclast X98 Pro",
+ .matches = {
+ /*
+ * Only match BIOS date, because the manufacturers
+ * BIOS does not report the board name at all
+ * (sometimes)...
+ */
+ DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+ DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"),
+ },
+ },
+ {
.ident = "WinBook TW100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
diff --git a/drivers/input/touchscreen/raydium_i2c_ts.c b/drivers/input/touchscreen/raydium_i2c_ts.c
index e694a9b2b1e5..603a948460d6 100644
--- a/drivers/input/touchscreen/raydium_i2c_ts.c
+++ b/drivers/input/touchscreen/raydium_i2c_ts.c
@@ -137,45 +137,25 @@ struct raydium_data {
bool wake_irq_enabled;
};
-static int raydium_i2c_xfer(struct i2c_client *client,
- u32 addr, void *data, size_t len, bool is_read)
-{
- struct raydium_bank_switch_header {
- u8 cmd;
- __be32 be_addr;
- } __packed header = {
- .cmd = RM_CMD_BANK_SWITCH,
- .be_addr = cpu_to_be32(addr),
- };
-
- u8 reg_addr = addr & 0xff;
-
- struct i2c_msg xfer[] = {
- {
- .addr = client->addr,
- .len = sizeof(header),
- .buf = (u8 *)&header,
- },
- {
- .addr = client->addr,
- .len = 1,
- .buf = &reg_addr,
- },
- {
- .addr = client->addr,
- .len = len,
- .buf = data,
- .flags = is_read ? I2C_M_RD : 0,
- }
- };
+/*
+ * Header to be sent for RM_CMD_BANK_SWITCH command. This is used by
+ * raydium_i2c_{read|send} below.
+ */
+struct __packed raydium_bank_switch_header {
+ u8 cmd;
+ __be32 be_addr;
+};
+static int raydium_i2c_xfer(struct i2c_client *client, u32 addr,
+ struct i2c_msg *xfer, size_t xfer_count)
+{
+ int ret;
/*
* If address is greater than 255, then RM_CMD_BANK_SWITCH needs to be
* sent first. Else, skip the header i.e. xfer[0].
*/
int xfer_start_idx = (addr > 0xff) ? 0 : 1;
- size_t xfer_count = ARRAY_SIZE(xfer) - xfer_start_idx;
- int ret;
+ xfer_count -= xfer_start_idx;
ret = i2c_transfer(client->adapter, &xfer[xfer_start_idx], xfer_count);
if (likely(ret == xfer_count))
@@ -189,10 +169,46 @@ static int raydium_i2c_send(struct i2c_client *client,
{
int tries = 0;
int error;
+ u8 *tx_buf;
+ u8 reg_addr = addr & 0xff;
+
+ tx_buf = kmalloc(len + 1, GFP_KERNEL);
+ if (!tx_buf)
+ return -ENOMEM;
+
+ tx_buf[0] = reg_addr;
+ memcpy(tx_buf + 1, data, len);
do {
- error = raydium_i2c_xfer(client, addr, (void *)data, len,
- false);
+ struct raydium_bank_switch_header header = {
+ .cmd = RM_CMD_BANK_SWITCH,
+ .be_addr = cpu_to_be32(addr),
+ };
+
+ /*
+ * Perform as a single i2c_transfer transaction to ensure that
+ * no other I2C transactions are initiated on the bus to any
+ * other device in between. Initiating transacations to other
+ * devices after RM_CMD_BANK_SWITCH is sent is known to cause
+ * issues. This is also why regmap infrastructure cannot be used
+ * for this driver. Regmap handles page(bank) switch and reads
+ * as separate i2c_transfer() operations. This can result in
+ * problems if the Raydium device is on a shared I2C bus.
+ */
+ struct i2c_msg xfer[] = {
+ {
+ .addr = client->addr,
+ .len = sizeof(header),
+ .buf = (u8 *)&header,
+ },
+ {
+ .addr = client->addr,
+ .len = len + 1,
+ .buf = tx_buf,
+ },
+ };
+
+ error = raydium_i2c_xfer(client, addr, xfer, ARRAY_SIZE(xfer));
if (likely(!error))
return 0;
@@ -206,12 +222,46 @@ static int raydium_i2c_send(struct i2c_client *client,
static int raydium_i2c_read(struct i2c_client *client,
u32 addr, void *data, size_t len)
{
- size_t xfer_len;
int error;
while (len) {
- xfer_len = min_t(size_t, len, RM_MAX_READ_SIZE);
- error = raydium_i2c_xfer(client, addr, data, xfer_len, true);
+ u8 reg_addr = addr & 0xff;
+ struct raydium_bank_switch_header header = {
+ .cmd = RM_CMD_BANK_SWITCH,
+ .be_addr = cpu_to_be32(addr),
+ };
+ size_t xfer_len = min_t(size_t, len, RM_MAX_READ_SIZE);
+
+ /*
+ * Perform as a single i2c_transfer transaction to ensure that
+ * no other I2C transactions are initiated on the bus to any
+ * other device in between. Initiating transacations to other
+ * devices after RM_CMD_BANK_SWITCH is sent is known to cause
+ * issues. This is also why regmap infrastructure cannot be used
+ * for this driver. Regmap handles page(bank) switch and writes
+ * as separate i2c_transfer() operations. This can result in
+ * problems if the Raydium device is on a shared I2C bus.
+ */
+ struct i2c_msg xfer[] = {
+ {
+ .addr = client->addr,
+ .len = sizeof(header),
+ .buf = (u8 *)&header,
+ },
+ {
+ .addr = client->addr,
+ .len = 1,
+ .buf = &reg_addr,
+ },
+ {
+ .addr = client->addr,
+ .len = xfer_len,
+ .buf = data,
+ .flags = I2C_M_RD,
+ }
+ };
+
+ error = raydium_i2c_xfer(client, addr, xfer, ARRAY_SIZE(xfer));
if (unlikely(error))
return error;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 19:53:13 +0000