diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/i2c/busses/i2c-aspeed.c | 54 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mt65xx.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-stm32f7.c | 21 |
3 files changed, 48 insertions, 29 deletions
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index fa66951b05d0..7b098ff5f5dd 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -108,6 +108,12 @@ #define ASPEED_I2CD_S_TX_CMD BIT(2) #define ASPEED_I2CD_M_TX_CMD BIT(1) #define ASPEED_I2CD_M_START_CMD BIT(0) +#define ASPEED_I2CD_MASTER_CMDS_MASK \ + (ASPEED_I2CD_M_STOP_CMD | \ + ASPEED_I2CD_M_S_RX_CMD_LAST | \ + ASPEED_I2CD_M_RX_CMD | \ + ASPEED_I2CD_M_TX_CMD | \ + ASPEED_I2CD_M_START_CMD) /* 0x18 : I2CD Slave Device Address Register */ #define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0) @@ -336,18 +342,19 @@ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) struct i2c_msg *msg = &bus->msgs[bus->msgs_index]; u8 slave_addr = i2c_8bit_addr_from_msg(msg); - bus->master_state = ASPEED_I2C_MASTER_START; - #if IS_ENABLED(CONFIG_I2C_SLAVE) /* * If it's requested in the middle of a slave session, set the master * state to 'pending' then H/W will continue handling this master * command when the bus comes back to the idle state. */ - if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) + if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) { bus->master_state = ASPEED_I2C_MASTER_PENDING; + return; + } #endif /* CONFIG_I2C_SLAVE */ + bus->master_state = ASPEED_I2C_MASTER_START; bus->buf_index = 0; if (msg->flags & I2C_M_RD) { @@ -422,20 +429,6 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) } } -#if IS_ENABLED(CONFIG_I2C_SLAVE) - /* - * A pending master command will be started by H/W when the bus comes - * back to idle state after completing a slave operation so change the - * master state from 'pending' to 'start' at here if slave is inactive. - */ - if (bus->master_state == ASPEED_I2C_MASTER_PENDING) { - if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) - goto out_no_complete; - - bus->master_state = ASPEED_I2C_MASTER_START; - } -#endif /* CONFIG_I2C_SLAVE */ - /* Master is not currently active, irq was for someone else. */ if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE || bus->master_state == ASPEED_I2C_MASTER_PENDING) @@ -462,11 +455,15 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) #if IS_ENABLED(CONFIG_I2C_SLAVE) /* * If a peer master starts a xfer immediately after it queues a - * master command, change its state to 'pending' then H/W will - * continue the queued master xfer just after completing the - * slave mode session. + * master command, clear the queued master command and change + * its state to 'pending'. To simplify handling of pending + * cases, it uses S/W solution instead of H/W command queue + * handling. */ if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) { + writel(readl(bus->base + ASPEED_I2C_CMD_REG) & + ~ASPEED_I2CD_MASTER_CMDS_MASK, + bus->base + ASPEED_I2C_CMD_REG); bus->master_state = ASPEED_I2C_MASTER_PENDING; dev_dbg(bus->dev, "master goes pending due to a slave start\n"); @@ -629,6 +626,14 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) irq_handled |= aspeed_i2c_master_irq(bus, irq_remaining); } + + /* + * Start a pending master command at here if a slave operation is + * completed. + */ + if (bus->master_state == ASPEED_I2C_MASTER_PENDING && + bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE) + aspeed_i2c_do_start(bus); #else irq_handled = aspeed_i2c_master_irq(bus, irq_remaining); #endif /* CONFIG_I2C_SLAVE */ @@ -691,6 +696,15 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, ASPEED_I2CD_BUS_BUSY_STS)) aspeed_i2c_recover_bus(bus); + /* + * If timed out and the state is still pending, drop the pending + * master command. + */ + spin_lock_irqsave(&bus->lock, flags); + if (bus->master_state == ASPEED_I2C_MASTER_PENDING) + bus->master_state = ASPEED_I2C_MASTER_INACTIVE; + spin_unlock_irqrestore(&bus->lock, flags); + return -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index 29eae1bf4f86..2152ec5f535c 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -875,7 +875,7 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id) static u32 mtk_i2c_functionality(struct i2c_adapter *adap) { - if (adap->quirks->flags & I2C_AQ_NO_ZERO_LEN) + if (i2c_check_quirks(adap, I2C_AQ_NO_ZERO_LEN)) return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); else diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c index d36cf08461f7..b24e7b937f21 100644 --- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -305,7 +305,7 @@ struct stm32f7_i2c_dev { struct regmap *regmap; }; -/** +/* * All these values are coming from I2C Specification, Version 6.0, 4th of * April 2014. * @@ -1192,6 +1192,8 @@ static void stm32f7_i2c_slave_start(struct stm32f7_i2c_dev *i2c_dev) STM32F7_I2C_CR1_TXIE; stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask); + /* Write 1st data byte */ + writel_relaxed(value, base + STM32F7_I2C_TXDR); } else { /* Notify i2c slave that new write transfer is starting */ i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); @@ -1501,7 +1503,7 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data) void __iomem *base = i2c_dev->base; struct device *dev = i2c_dev->dev; struct stm32_i2c_dma *dma = i2c_dev->dma; - u32 mask, status; + u32 status; status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR); @@ -1526,12 +1528,15 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data) f7_msg->result = -EINVAL; } - /* Disable interrupts */ - if (stm32f7_i2c_is_slave_registered(i2c_dev)) - mask = STM32F7_I2C_XFER_IRQ_MASK; - else - mask = STM32F7_I2C_ALL_IRQ_MASK; - stm32f7_i2c_disable_irq(i2c_dev, mask); + if (!i2c_dev->slave_running) { + u32 mask; + /* Disable interrupts */ + if (stm32f7_i2c_is_slave_registered(i2c_dev)) + mask = STM32F7_I2C_XFER_IRQ_MASK; + else + mask = STM32F7_I2C_ALL_IRQ_MASK; + stm32f7_i2c_disable_irq(i2c_dev, mask); + } /* Disable dma */ if (i2c_dev->use_dma) { |