diff options
Diffstat (limited to 'drivers')
479 files changed, 16507 insertions, 8964 deletions
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 4334c208841a..41427a41f620 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -245,6 +245,35 @@ arch_initcall(init_acpi_device_notify); #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) +#ifdef CONFIG_PM +static u32 rtc_handler(void *context) +{ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_disable_event(ACPI_EVENT_RTC, 0); + return ACPI_INTERRUPT_HANDLED; +} + +static inline void rtc_wake_setup(void) +{ + acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); +} + +static void rtc_wake_on(struct device *dev) +{ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_enable_event(ACPI_EVENT_RTC, 0); +} + +static void rtc_wake_off(struct device *dev) +{ + acpi_disable_event(ACPI_EVENT_RTC, 0); +} +#else +#define rtc_wake_setup() do{}while(0) +#define rtc_wake_on NULL +#define rtc_wake_off NULL +#endif + /* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find * its device node and pass extra config data. This helps its driver use * capabilities that the now-obsolete mc146818 didn't have, and informs it @@ -283,11 +312,24 @@ static int __init acpi_rtc_init(void) struct device *dev = get_rtc_dev(); if (dev) { + rtc_wake_setup(); + rtc_info.wake_on = rtc_wake_on; + rtc_info.wake_off = rtc_wake_off; + + /* workaround bug in some ACPI tables */ + if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) { + DBG("bogus FADT month_alarm\n"); + acpi_gbl_FADT.month_alarm = 0; + } + rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm; rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm; rtc_info.rtc_century = acpi_gbl_FADT.century; - /* NOTE: acpi_gbl_FADT->rtcs4 is NOT currently useful */ + /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */ + if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE) + printk(PREFIX "RTC can wake from S4\n"); + dev->platform_data = &rtc_info; @@ -296,7 +338,7 @@ static int __init acpi_rtc_init(void) put_device(dev); } else - pr_debug("ACPI: RTC unavailable?\n"); + DBG("RTC unavailable?\n"); return 0; } /* do this between RTC subsys_initcall() and rtc_cmos driver_initcall() */ diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 8fcd6a15517f..4dd0dabe81cb 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -228,7 +228,7 @@ int __init acpi_numa_init(void) return 0; } -int acpi_get_pxm(acpi_handle h) +int __meminit acpi_get_pxm(acpi_handle h) { unsigned long pxm; acpi_status status; @@ -246,7 +246,7 @@ int acpi_get_pxm(acpi_handle h) } EXPORT_SYMBOL(acpi_get_pxm); -int acpi_get_node(acpi_handle *handle) +int __meminit acpi_get_node(acpi_handle *handle) { int pxm, node = -1; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 971eca4864fa..c2bed56915e1 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -30,7 +30,6 @@ #include <linux/slab.h> #include <linux/mm.h> #include <linux/pci.h> -#include <linux/smp_lock.h> #include <linux/interrupt.h> #include <linux/kmod.h> #include <linux/delay.h> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index d80dd84e5bfd..6b3b8a522476 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -302,7 +302,7 @@ static void acpi_device_shutdown(struct device *dev) return ; } -static struct bus_type acpi_bus_type = { +struct bus_type acpi_bus_type = { .name = "acpi", .suspend = acpi_device_suspend, .resume = acpi_device_resume, diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index dcde9ddd105a..5a76e5be61d5 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -70,6 +70,14 @@ acpi_system_write_sleep(struct file *file, } #endif /* CONFIG_ACPI_SLEEP_PROC_SLEEP */ +#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) +/* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */ +#else +#define HAVE_ACPI_LEGACY_ALARM +#endif + +#ifdef HAVE_ACPI_LEGACY_ALARM + static int acpi_system_alarm_seq_show(struct seq_file *seq, void *offset) { u32 sec, min, hr; @@ -341,6 +349,8 @@ acpi_system_write_alarm(struct file *file, end: return_VALUE(result ? result : count); } +#endif /* HAVE_ACPI_LEGACY_ALARM */ + extern struct list_head acpi_wakeup_device_list; extern spinlock_t acpi_device_lock; @@ -464,6 +474,7 @@ static const struct file_operations acpi_system_sleep_fops = { }; #endif /* CONFIG_ACPI_SLEEP_PROC_SLEEP */ +#ifdef HAVE_ACPI_LEGACY_ALARM static const struct file_operations acpi_system_alarm_fops = { .open = acpi_system_alarm_open_fs, .read = seq_read, @@ -479,8 +490,9 @@ static u32 rtc_handler(void *context) return ACPI_INTERRUPT_HANDLED; } +#endif /* HAVE_ACPI_LEGACY_ALARM */ -static int acpi_sleep_proc_init(void) +static int __init acpi_sleep_proc_init(void) { struct proc_dir_entry *entry = NULL; @@ -496,6 +508,7 @@ static int acpi_sleep_proc_init(void) entry->proc_fops = &acpi_system_sleep_fops; #endif +#ifdef HAVE_ACPI_LEGACY_ALARM /* 'alarm' [R/W] */ entry = create_proc_entry("alarm", S_IFREG | S_IRUGO | S_IWUSR, @@ -503,6 +516,9 @@ static int acpi_sleep_proc_init(void) if (entry) entry->proc_fops = &acpi_system_alarm_fops; + acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); +#endif /* HAVE_ACPI_LEGACY_ALARM */ + /* 'wakeup device' [R/W] */ entry = create_proc_entry("wakeup", S_IFREG | S_IRUGO | S_IWUSR, @@ -510,7 +526,6 @@ static int acpi_sleep_proc_init(void) if (entry) entry->proc_fops = &acpi_system_wakeup_device_fops; - acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); return 0; } diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 34c5534ed64c..d9617892fc23 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -874,7 +874,8 @@ static int ahci_clo(struct ata_port *ap) return 0; } -static int ahci_softreset(struct ata_port *ap, unsigned int *class) +static int ahci_softreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { struct ahci_port_priv *pp = ap->private_data; void __iomem *port_mmio = ahci_port_base(ap); @@ -959,15 +960,13 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) */ msleep(150); - *class = ATA_DEV_NONE; - if (ata_port_online(ap)) { - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - rc = -EIO; - reason = "device not ready"; - goto fail; - } - *class = ahci_dev_classify(ap); + rc = ata_wait_ready(ap, deadline); + /* link occupied, -ENODEV too is an error */ + if (rc) { + reason = "device not ready"; + goto fail; } + *class = ahci_dev_classify(ap); DPRINTK("EXIT, class=%u\n", *class); return 0; @@ -979,7 +978,8 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class) return rc; } -static int ahci_hardreset(struct ata_port *ap, unsigned int *class) +static int ahci_hardreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { struct ahci_port_priv *pp = ap->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; @@ -995,7 +995,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class) tf.command = 0x80; ata_tf_to_fis(&tf, d2h_fis, 0); - rc = sata_std_hardreset(ap, class); + rc = sata_std_hardreset(ap, class, deadline); ahci_start_engine(ap); @@ -1008,7 +1008,8 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class) return rc; } -static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class) +static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { int rc; @@ -1016,7 +1017,8 @@ static int ahci_vt8251_hardreset(struct ata_port *ap, unsigned int *class) ahci_stop_engine(ap); - rc = sata_port_hardreset(ap, sata_ehc_deb_timing(&ap->eh_context)); + rc = sata_port_hardreset(ap, sata_ehc_deb_timing(&ap->eh_context), + deadline); /* vt8251 needs SError cleared for the port to operate */ ahci_scr_write(ap, SCR_ERROR, ahci_scr_read(ap, SCR_ERROR)); diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 55d306a3e538..4a795fdb6a02 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -625,17 +625,18 @@ static int ich_pata_cable_detect(struct ata_port *ap) /** * piix_pata_prereset - prereset for PATA host controller * @ap: Target port + * @deadline: deadline jiffies for the operation * * LOCKING: * None (inherited from caller). */ -static int piix_pata_prereset(struct ata_port *ap) +static int piix_pata_prereset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } static void piix_pata_error_handler(struct ata_port *ap) @@ -644,7 +645,6 @@ static void piix_pata_error_handler(struct ata_port *ap) ata_std_postreset); } - static void piix_sata_error_handler(struct ata_port *ap) { ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL, diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ca67484af1eb..a7950885d18e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2979,23 +2979,71 @@ int ata_busy_sleep(struct ata_port *ap, return 0; } -static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) +/** + * ata_wait_ready - sleep until BSY clears, or timeout + * @ap: port containing status register to be polled + * @deadline: deadline jiffies for the operation + * + * Sleep until ATA Status register bit BSY clears, or timeout + * occurs. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_wait_ready(struct ata_port *ap, unsigned long deadline) +{ + unsigned long start = jiffies; + int warned = 0; + + while (1) { + u8 status = ata_chk_status(ap); + unsigned long now = jiffies; + + if (!(status & ATA_BUSY)) + return 0; + if (status == 0xff) + return -ENODEV; + if (time_after(now, deadline)) + return -EBUSY; + + if (!warned && time_after(now, start + 5 * HZ) && + (deadline - now > 3 * HZ)) { + ata_port_printk(ap, KERN_WARNING, + "port is slow to respond, please be patient " + "(Status 0x%x)\n", status); + warned = 1; + } + + msleep(50); + } +} + +static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int dev0 = devmask & (1 << 0); unsigned int dev1 = devmask & (1 << 1); - unsigned long timeout; + int rc, ret = 0; /* if device 0 was found in ata_devchk, wait for its * BSY bit to clear */ - if (dev0) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + if (dev0) { + rc = ata_wait_ready(ap, deadline); + if (rc) { + if (rc != -ENODEV) + return rc; + ret = rc; + } + } /* if device 1 was found in ata_devchk, wait for * register access, then wait for BSY to clear */ - timeout = jiffies + ATA_TMOUT_BOOT; while (dev1) { u8 nsect, lbal; @@ -3004,14 +3052,18 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) lbal = ioread8(ioaddr->lbal_addr); if ((nsect == 1) && (lbal == 1)) break; - if (time_after(jiffies, timeout)) { - dev1 = 0; - break; - } + if (time_after(jiffies, deadline)) + return -EBUSY; msleep(50); /* give drive a breather */ } - if (dev1) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + if (dev1) { + rc = ata_wait_ready(ap, deadline); + if (rc) { + if (rc != -ENODEV) + return rc; + ret = rc; + } + } /* is all this really necessary? */ ap->ops->dev_select(ap, 0); @@ -3019,10 +3071,12 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) ap->ops->dev_select(ap, 1); if (dev0) ap->ops->dev_select(ap, 0); + + return ret; } -static unsigned int ata_bus_softreset(struct ata_port *ap, - unsigned int devmask) +static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) { struct ata_ioports *ioaddr = &ap->ioaddr; @@ -3052,11 +3106,9 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * pulldown resistor. */ if (ata_check_status(ap) == 0xFF) - return 0; - - ata_bus_post_reset(ap, devmask); + return -ENODEV; - return 0; + return ata_bus_post_reset(ap, devmask, deadline); } /** @@ -3085,6 +3137,7 @@ void ata_bus_reset(struct ata_port *ap) unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; u8 err; unsigned int dev0, dev1 = 0, devmask = 0; + int rc; DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no); @@ -3106,9 +3159,11 @@ void ata_bus_reset(struct ata_port *ap) ap->ops->dev_select(ap, 0); /* issue bus reset */ - if (ap->flags & ATA_FLAG_SRST) - if (ata_bus_softreset(ap, devmask)) + if (ap->flags & ATA_FLAG_SRST) { + rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ); + if (rc && rc != -ENODEV) goto err_out; + } /* * determine by signature whether we have ATA or ATAPI devices @@ -3150,29 +3205,37 @@ err_out: * sata_phy_debounce - debounce SATA phy status * @ap: ATA port to debounce SATA phy status for * @params: timing parameters { interval, duratinon, timeout } in msec + * @deadline: deadline jiffies for the operation * * Make sure SStatus of @ap reaches stable state, determined by * holding the same value where DET is not 1 for @duration polled * every @interval, before @timeout. Timeout constraints the - * beginning of the stable state. Because, after hot unplugging, - * DET gets stuck at 1 on some controllers, this functions waits + * beginning of the stable state. Because DET gets stuck at 1 on + * some controllers after hot unplugging, this functions waits * until timeout then returns 0 if DET is stable at 1. * + * @timeout is further limited by @deadline. The sooner of the + * two is used. + * * LOCKING: * Kernel thread context (may sleep) * * RETURNS: * 0 on success, -errno on failure. */ -int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) +int sata_phy_debounce(struct ata_port *ap, const unsigned long *params, + unsigned long deadline) { unsigned long interval_msec = params[0]; - unsigned long duration = params[1] * HZ / 1000; - unsigned long timeout = jiffies + params[2] * HZ / 1000; - unsigned long last_jiffies; + unsigned long duration = msecs_to_jiffies(params[1]); + unsigned long last_jiffies, t; u32 last, cur; int rc; + t = jiffies + msecs_to_jiffies(params[2]); + if (time_before(t, deadline)) + deadline = t; + if ((rc = sata_scr_read(ap, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3188,7 +3251,7 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) /* DET stable? */ if (cur == last) { - if (cur == 1 && time_before(jiffies, timeout)) + if (cur == 1 && time_before(jiffies, deadline)) continue; if (time_after(jiffies, last_jiffies + duration)) return 0; @@ -3199,8 +3262,8 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) last = cur; last_jiffies = jiffies; - /* check timeout */ - if (time_after(jiffies, timeout)) + /* check deadline */ + if (time_after(jiffies, deadline)) return -EBUSY; } } @@ -3209,6 +3272,7 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) * sata_phy_resume - resume SATA phy * @ap: ATA port to resume SATA phy for * @params: timing parameters { interval, duratinon, timeout } in msec + * @deadline: deadline jiffies for the operation * * Resume SATA phy of @ap and debounce it. * @@ -3218,7 +3282,8 @@ int sata_phy_debounce(struct ata_port *ap, const unsigned long *params) * RETURNS: * 0 on success, -errno on failure. */ -int sata_phy_resume(struct ata_port *ap, const unsigned long *params) +int sata_phy_resume(struct ata_port *ap, const unsigned long *params, + unsigned long deadline) { u32 scontrol; int rc; @@ -3236,43 +3301,19 @@ int sata_phy_resume(struct ata_port *ap, const unsigned long *params) */ msleep(200); - return sata_phy_debounce(ap, params); -} - -static void ata_wait_spinup(struct ata_port *ap) -{ - struct ata_eh_context *ehc = &ap->eh_context; - unsigned long end, secs; - int rc; - - /* first, debounce phy if SATA */ - if (ap->cbl == ATA_CBL_SATA) { - rc = sata_phy_debounce(ap, sata_deb_timing_hotplug); - - /* if debounced successfully and offline, no need to wait */ - if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) - return; - } - - /* okay, let's give the drive time to spin up */ - end = ehc->i.hotplug_timestamp + ATA_SPINUP_WAIT * HZ / 1000; - secs = ((end - jiffies) + HZ - 1) / HZ; - - if (time_after(jiffies, end)) - return; - - if (secs > 5) - ata_port_printk(ap, KERN_INFO, "waiting for device to spin up " - "(%lu secs)\n", secs); - - schedule_timeout_uninterruptible(end - jiffies); + return sata_phy_debounce(ap, params, deadline); } /** * ata_std_prereset - prepare for reset * @ap: ATA port to be reset + * @deadline: deadline jiffies for the operation * - * @ap is about to be reset. Initialize it. + * @ap is about to be reset. Initialize it. Failure from + * prereset makes libata abort whole reset sequence and give up + * that port, so prereset should be best-effort. It does its + * best to prepare for reset sequence but if things go wrong, it + * should just whine, not fail. * * LOCKING: * Kernel thread context (may sleep) @@ -3280,41 +3321,41 @@ static void ata_wait_spinup(struct ata_port *ap) * RETURNS: * 0 on success, -errno otherwise. */ -int ata_std_prereset(struct ata_port *ap) +int ata_std_prereset(struct ata_port *ap, unsigned long deadline) { struct ata_eh_context *ehc = &ap->eh_context; const unsigned long *timing = sata_ehc_deb_timing(ehc); int rc; - /* handle link resume & hotplug spinup */ + /* handle link resume */ if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && (ap->flags & ATA_FLAG_HRST_TO_RESUME)) ehc->i.action |= ATA_EH_HARDRESET; - if ((ehc->i.flags & ATA_EHI_HOTPLUGGED) && - (ap->flags & ATA_FLAG_SKIP_D2H_BSY)) - ata_wait_spinup(ap); - /* if we're about to do hardreset, nothing more to do */ if (ehc->i.action & ATA_EH_HARDRESET) return 0; /* if SATA, resume phy */ if (ap->cbl == ATA_CBL_SATA) { - rc = sata_phy_resume(ap, timing); - if (rc && rc != -EOPNOTSUPP) { - /* phy resume failed */ + rc = sata_phy_resume(ap, timing, deadline); + /* whine about phy resume failure but proceed */ + if (rc && rc != -EOPNOTSUPP) ata_port_printk(ap, KERN_WARNING, "failed to resume " "link for reset (errno=%d)\n", rc); - return rc; - } } /* Wait for !BSY if the controller can wait for the first D2H * Reg FIS and we don't know that no device is attached. */ - if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) { + rc = ata_wait_ready(ap, deadline); + if (rc) { + ata_port_printk(ap, KERN_WARNING, "device not ready " + "(errno=%d), forcing hardreset\n", rc); + ehc->i.action |= ATA_EH_HARDRESET; + } + } return 0; } @@ -3323,6 +3364,7 @@ int ata_std_prereset(struct ata_port *ap) * ata_std_softreset - reset host port via ATA SRST * @ap: port to reset * @classes: resulting classes of attached devices + * @deadline: deadline jiffies for the operation * * Reset host port using ATA SRST. * @@ -3332,10 +3374,12 @@ int ata_std_prereset(struct ata_port *ap) * RETURNS: * 0 on success, -errno otherwise. */ -int ata_std_softreset(struct ata_port *ap, unsigned int *classes) +int ata_std_softreset(struct ata_port *ap, unsigned int *classes, + unsigned long deadline) { unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - unsigned int devmask = 0, err_mask; + unsigned int devmask = 0; + int rc; u8 err; DPRINTK("ENTER\n"); @@ -3356,11 +3400,11 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) /* issue bus reset */ DPRINTK("about to softreset, devmask=%x\n", devmask); - err_mask = ata_bus_softreset(ap, devmask); - if (err_mask) { - ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", - err_mask); - return -EIO; + rc = ata_bus_softreset(ap, devmask, deadline); + /* if link is occupied, -ENODEV too is an error */ + if (rc && (rc != -ENODEV || sata_scr_valid(ap))) { + ata_port_printk(ap, KERN_ERR, "SRST failed (errno=%d)\n", rc); + return rc; } /* determine by signature whether we have ATA or ATAPI devices */ @@ -3377,6 +3421,7 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) * sata_port_hardreset - reset port via SATA phy reset * @ap: port to reset * @timing: timing parameters { interval, duratinon, timeout } in msec + * @deadline: deadline jiffies for the operation * * SATA phy-reset host port using DET bits of SControl register. * @@ -3386,7 +3431,8 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) * RETURNS: * 0 on success, -errno otherwise. */ -int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing) +int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing, + unsigned long deadline) { u32 scontrol; int rc; @@ -3425,7 +3471,7 @@ int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing) msleep(1); /* bring phy back */ - rc = sata_phy_resume(ap, timing); + rc = sata_phy_resume(ap, timing, deadline); out: DPRINTK("EXIT, rc=%d\n", rc); return rc; @@ -3435,6 +3481,7 @@ int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing) * sata_std_hardreset - reset host port via SATA phy reset * @ap: port to reset * @class: resulting class of attached device + * @deadline: deadline jiffies for the operation * * SATA phy-reset host port using DET bits of SControl register, * wait for !BSY and classify the attached device. @@ -3445,7 +3492,8 @@ int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing) * RETURNS: * 0 on success, -errno otherwise. */ -int sata_std_hardreset(struct ata_port *ap, unsigned int *class) +int sata_std_hardreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context); int rc; @@ -3453,7 +3501,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) DPRINTK("ENTER\n"); /* do hardreset */ - rc = sata_port_hardreset(ap, timing); + rc = sata_port_hardreset(ap, timing, deadline); if (rc) { ata_port_printk(ap, KERN_ERR, "COMRESET failed (errno=%d)\n", rc); @@ -3470,10 +3518,12 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) /* wait a while before checking status, see SRST for more info */ msleep(150); - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + rc = ata_wait_ready(ap, deadline); + /* link occupied, -ENODEV too is an error */ + if (rc) { ata_port_printk(ap, KERN_ERR, - "COMRESET failed (device not ready)\n"); - return -EIO; + "COMRESET failed (errno=%d)\n", rc); + return rc; } ap->ops->dev_select(ap, 0); /* probably unnecessary */ @@ -6793,6 +6843,7 @@ EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_busy_sleep); +EXPORT_SYMBOL_GPL(ata_wait_ready); EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 2bff9adcacf1..8256655ce7d9 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -50,6 +50,28 @@ enum { ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2), }; +/* Waiting in ->prereset can never be reliable. It's sometimes nice + * to wait there but it can't be depended upon; otherwise, we wouldn't + * be resetting. Just give it enough time for most drives to spin up. + */ +enum { + ATA_EH_PRERESET_TIMEOUT = 10 * HZ, +}; + +/* The following table determines how we sequence resets. Each entry + * represents timeout for that try. The first try can be soft or + * hardreset. All others are hardreset if available. In most cases + * the first reset w/ 10sec timeout should succeed. Following entries + * are mostly for error handling, hotplug and retarded devices. + */ +static const unsigned long ata_eh_reset_timeouts[] = { + 10 * HZ, /* most drives spin up by 10sec */ + 10 * HZ, /* > 99% working drives spin up before 20sec */ + 35 * HZ, /* give > 30 secs of idleness for retarded devices */ + 5 * HZ, /* and sweet one last chance */ + /* > 1 min has elapsed, give up */ +}; + static void __ata_port_freeze(struct ata_port *ap); static void ata_eh_finish(struct ata_port *ap); #ifdef CONFIG_PM @@ -1558,14 +1580,14 @@ static void ata_eh_report(struct ata_port *ap) } static int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset, - unsigned int *classes) + unsigned int *classes, unsigned long deadline) { int i, rc; for (i = 0; i < ATA_MAX_DEVICES; i++) classes[i] = ATA_DEV_UNKNOWN; - rc = reset(ap, classes); + rc = reset(ap, classes, deadline); if (rc) return rc; @@ -1603,8 +1625,9 @@ static int ata_eh_reset(struct ata_port *ap, int classify, { struct ata_eh_context *ehc = &ap->eh_context; unsigned int *classes = ehc->classes; - int tries = ATA_EH_RESET_TRIES; int verbose = !(ehc->i.flags & ATA_EHI_QUIET); + int try = 0; + unsigned long deadline; unsigned int action; ata_reset_fn_t reset; int i, did_followup_srst, rc; @@ -1624,7 +1647,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, ehc->i.action |= ATA_EH_HARDRESET; if (prereset) { - rc = prereset(ap); + rc = prereset(ap, jiffies + ATA_EH_PRERESET_TIMEOUT); if (rc) { if (rc == -ENOENT) { ata_port_printk(ap, KERN_DEBUG, @@ -1665,6 +1688,8 @@ static int ata_eh_reset(struct ata_port *ap, int classify, } retry: + deadline = jiffies + ata_eh_reset_timeouts[try++]; + /* shut up during boot probing */ if (verbose) ata_port_printk(ap, KERN_INFO, "%s resetting port\n", @@ -1676,7 +1701,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, else ehc->i.flags |= ATA_EHI_DID_SOFTRESET; - rc = ata_do_reset(ap, reset, classes); + rc = ata_do_reset(ap, reset, classes, deadline); did_followup_srst = 0; if (reset == hardreset && @@ -1693,7 +1718,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, } ata_eh_about_to_do(ap, NULL, ATA_EH_RESET_MASK); - rc = ata_do_reset(ap, reset, classes); + rc = ata_do_reset(ap, reset, classes, deadline); if (rc == 0 && classify && classes[0] == ATA_DEV_UNKNOWN) { @@ -1703,22 +1728,21 @@ static int ata_eh_reset(struct ata_port *ap, int classify, } } - if (rc && --tries) { - const char *type; + if (rc && try < ARRAY_SIZE(ata_eh_reset_timeouts)) { + unsigned long now = jiffies; - if (reset == softreset) { - if (did_followup_srst) - type = "follow-up soft"; - else - type = "soft"; - } else - type = "hard"; + if (time_before(now, deadline)) { + unsigned long delta = deadline - jiffies; - ata_port_printk(ap, KERN_WARNING, - "%sreset failed, retrying in 5 secs\n", type); - ssleep(5); + ata_port_printk(ap, KERN_WARNING, "reset failed " + "(errno=%d), retrying in %u secs\n", + rc, (jiffies_to_msecs(delta) + 999) / 1000); + + schedule_timeout_uninterruptible(delta); + } - if (reset == hardreset) + if (reset == hardreset && + try == ARRAY_SIZE(ata_eh_reset_timeouts) - 1) sata_down_spd_limit(ap); if (hardreset) reset = hardreset; diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 536ee892ab72..67c7e87dec04 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -121,12 +121,13 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse /** * amd_probe_init - perform reset handling * @ap: ATA port + * @deadline: deadline jiffies for the operation * * Reset sequence checking enable bits to see which ports are * active. */ -static int amd_pre_reset(struct ata_port *ap) +static int amd_pre_reset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits amd_enable_bits[] = { { 0x40, 1, 0x02, 0x02 }, @@ -138,8 +139,7 @@ static int amd_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); - + return ata_std_prereset(ap, deadline); } static void amd_error_handler(struct ata_port *ap) @@ -227,7 +227,8 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) * space for us. */ -static int nv_pre_reset(struct ata_port *ap) { +static int nv_pre_reset(struct ata_port *ap, unsigned long deadline) +{ static const struct pci_bits nv_enable_bits[] = { { 0x50, 1, 0x02, 0x02 }, { 0x50, 1, 0x01, 0x01 } @@ -238,7 +239,7 @@ static int nv_pre_reset(struct ata_port *ap) { if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } static void nv_error_handler(struct ata_port *ap) diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 00e9ec342db0..ef51940c3adb 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -39,7 +39,7 @@ static int clock = 0; -static int artop6210_pre_reset(struct ata_port *ap) +static int artop6210_pre_reset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); const struct pci_bits artop_enable_bits[] = { @@ -49,7 +49,8 @@ static int artop6210_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } /** @@ -70,12 +71,13 @@ static void artop6210_error_handler(struct ata_port *ap) /** * artop6260_pre_reset - check for 40/80 pin * @ap: Port + * @deadline: deadline jiffies for the operation * * The ARTOP hardware reports the cable detect bits in register 0x49. * Nothing complicated needed here. */ -static int artop6260_pre_reset(struct ata_port *ap) +static int artop6260_pre_reset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits artop_enable_bits[] = { { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */ @@ -87,7 +89,8 @@ static int artop6260_pre_reset(struct ata_port *ap) /* Odd numbered device ids are the units with enable bits (the -R cards) */ if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 39c871a3ddac..21515381b5b3 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -33,7 +33,7 @@ enum { ATIIXP_IDE_UDMA_MODE = 0x56 }; -static int atiixp_pre_reset(struct ata_port *ap) +static int atiixp_pre_reset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits atiixp_enable_bits[] = { { 0x48, 1, 0x01, 0x00 }, @@ -44,7 +44,7 @@ static int atiixp_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } static void atiixp_error_handler(struct ata_port *ap) diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 08cccc9c659b..22006ae71941 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -72,6 +72,7 @@ /** * cs5535_cable_detect - detect cable type * @ap: Port to detect on + * @deadline: deadline jiffies for the operation * * Perform cable detection for ATA66 capable cable. Return a libata * cable type. diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index a3216850bba1..d0f52e034906 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -27,12 +27,13 @@ /** * efar_pre_reset - Enable bits * @ap: Port + * @deadline: deadline jiffies for the operation * * Perform cable detection for the EFAR ATA interface. This is * different to the PIIX arrangement */ -static int efar_pre_reset(struct ata_port *ap) +static int efar_pre_reset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits efar_enable_bits[] = { { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ @@ -43,7 +44,7 @@ static int efar_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 93cfa6d300a5..e64e05e5c7fe 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -220,7 +220,7 @@ static int hpt36x_cable_detect(struct ata_port *ap) return ATA_CBL_PATA80; } -static int hpt36x_pre_reset(struct ata_port *ap) +static int hpt36x_pre_reset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits hpt36x_enable_bits[] = { { 0x50, 1, 0x04, 0x04 }, @@ -231,7 +231,7 @@ static int hpt36x_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 41d831296347..1614e8c822a4 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -307,11 +307,12 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask) /** * hpt37x_pre_reset - reset the hpt37x bus * @ap: ATA port to reset + * @deadline: deadline jiffies for the operation * * Perform the initial reset handling for the 370/372 and 374 func 0 */ -static int hpt37x_pre_reset(struct ata_port *ap) +static int hpt37x_pre_reset(struct ata_port *ap, unsigned long deadline) { u8 scr2, ata66; struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -338,7 +339,7 @@ static int hpt37x_pre_reset(struct ata_port *ap) pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } /** @@ -353,7 +354,7 @@ static void hpt37x_error_handler(struct ata_port *ap) ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); } -static int hpt374_pre_reset(struct ata_port *ap) +static int hpt374_pre_reset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits hpt37x_enable_bits[] = { { 0x50, 1, 0x04, 0x04 }, @@ -388,7 +389,7 @@ static int hpt374_pre_reset(struct ata_port *ap) pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 6a34521b9e01..ea1037d67860 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -148,13 +148,14 @@ static int hpt3x2n_cable_detect(struct ata_port *ap) * Reset the hardware and state machine, */ -static int hpt3xn_pre_reset(struct ata_port *ap) +static int hpt3xn_pre_reset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); /* Reset the state machine */ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index 011306ef8334..17bf9f3ed013 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -24,12 +24,13 @@ /** * it8213_pre_reset - check for 40/80 pin * @ap: Port + * @deadline: deadline jiffies for the operation * * Filter out ports by the enable bits before doing the normal reset * and probe. */ -static int it8213_pre_reset(struct ata_port *ap) +static int it8213_pre_reset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits it8213_enable_bits[] = { { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ @@ -37,7 +38,8 @@ static int it8213_pre_reset(struct ata_port *ap) struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 43763c99ea02..1daf78ac6efb 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -30,16 +30,17 @@ typedef enum { /** * jmicron_pre_reset - check for 40/80 pin * @ap: Port + * @deadline: deadline jiffies for the operation * * Perform the PATA port setup we need. - + * * On the Jmicron 361/363 there is a single PATA port that can be mapped * either as primary or secondary (or neither). We don't do any policy * and setup here. We assume that has been done by init_one and the * BIOS. */ -static int jmicron_pre_reset(struct ata_port *ap) +static int jmicron_pre_reset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 control; @@ -102,7 +103,7 @@ static int jmicron_pre_reset(struct ata_port *ap) ap->cbl = ATA_CBL_SATA; break; } - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index d9b94a1b6954..837b7fe77dc7 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -25,11 +25,12 @@ /** * marvell_pre_reset - check for 40/80 pin * @ap: Port + * @deadline: deadline jiffies for the operation * * Perform the PATA port setup we need. */ -static int marvell_pre_reset(struct ata_port *ap) +static int marvell_pre_reset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 devices; @@ -52,7 +53,8 @@ static int marvell_pre_reset(struct ata_port *ap) if ((pdev->device == 0x6145) && (ap->port_no == 0) && (!(devices & 0x10))) /* PATA enable ? */ return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } static int marvell_cable_detect(struct ata_port *ap) @@ -67,6 +69,7 @@ static int marvell_cable_detect(struct ata_port *ap) case 1: /* Legacy SATA port */ return ATA_CBL_SATA; } + BUG(); return 0; /* Our BUG macro needs the right markup */ } diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index 987c5fafab08..3bfbd495f643 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -46,14 +46,15 @@ enum { SECONDARY = (1 << 14) }; -static int mpiix_pre_reset(struct ata_port *ap) +static int mpiix_pre_reset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits mpiix_enable_bits = { 0x6D, 1, 0x80, 0x80 }; if (!pci_test_config_bits(pdev, &mpiix_enable_bits)) return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 078aeda9cf8d..ebc58a907d26 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -33,11 +33,12 @@ /** * ns87410_pre_reset - probe begin * @ap: ATA port + * @deadline: deadline jiffies for the operation * * Check enabled ports */ -static int ns87410_pre_reset(struct ata_port *ap) +static int ns87410_pre_reset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits ns87410_enable_bits[] = { @@ -47,7 +48,8 @@ static int ns87410_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index dea4690340d1..4d75d32e5826 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c @@ -30,11 +30,12 @@ /** * oldpiix_pre_reset - probe begin * @ap: ATA port + * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int oldpiix_pre_reset(struct ata_port *ap) +static int oldpiix_pre_reset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits oldpiix_enable_bits[] = { @@ -44,7 +45,8 @@ static int oldpiix_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index 13b63e21838d..0af8a2c77cc9 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c @@ -47,11 +47,12 @@ enum { /** * opti_pre_reset - probe begin * @ap: ATA port + * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int opti_pre_reset(struct ata_port *ap) +static int opti_pre_reset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits opti_enable_bits[] = { @@ -61,7 +62,8 @@ static int opti_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index b70e04c144df..2843e480f216 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -48,11 +48,12 @@ static int pci_clock; /* 0 = 33 1 = 25 */ /** * optidma_pre_reset - probe begin * @ap: ATA port + * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int optidma_pre_reset(struct ata_port *ap) +static int optidma_pre_reset(struct ata_port *ap, unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const struct pci_bits optidma_enable_bits = { @@ -62,7 +63,7 @@ static int optidma_pre_reset(struct ata_port *ap) if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits)) return -ENOENT; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index a61cbc110688..0d2cc49fde4b 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -301,6 +301,7 @@ static inline int pdc2027x_port_enabled(struct ata_port *ap) /** * pdc2027x_prereset - prereset for PATA host controller * @ap: Target port + * @deadline: deadline jiffies for the operation * * Probeinit including cable detection. * @@ -308,12 +309,12 @@ static inline int pdc2027x_port_enabled(struct ata_port *ap) * None (inherited from caller). */ -static int pdc2027x_prereset(struct ata_port *ap) +static int pdc2027x_prereset(struct ata_port *ap, unsigned long deadline) { /* Check whether port enabled */ if (!pdc2027x_port_enabled(ap)) return -ENOENT; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 3956ef26936d..b6e020383dd9 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -139,12 +139,14 @@ static struct sv_cable_table cable_detect[] = { /** * serverworks_cable_detect - cable detection * @ap: ATA port + * @deadline: deadline jiffies for the operation * * Perform cable detection according to the device and subvendor * identifications */ -static int serverworks_cable_detect(struct ata_port *ap) { +static int serverworks_cable_detect(struct ata_port *ap) +{ struct pci_dev *pdev = to_pci_dev(ap->host->dev); struct sv_cable_table *cb = cable_detect; diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index 6770820cfca9..a5886f061c0b 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -94,11 +94,13 @@ static int sil680_cable_detect(struct ata_port *ap) { /** * sil680_bus_reset - reset the SIL680 bus * @ap: ATA port to reset + * @deadline: deadline jiffies for the operation * * Perform the SIL680 housekeeping when doing an ATA bus reset */ -static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes) +static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes, + unsigned long deadline) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned long addr = sil680_selreg(ap, 0); @@ -108,7 +110,7 @@ static int sil680_bus_reset(struct ata_port *ap,unsigned int *classes) pci_write_config_byte(pdev, addr, reset | 0x03); udelay(25); pci_write_config_byte(pdev, addr, reset); - return ata_std_softreset(ap, classes); + return ata_std_softreset(ap, classes, deadline); } static void sil680_error_handler(struct ata_port *ap) diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index a3fbcee6fb33..f5838cc11728 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -88,6 +88,7 @@ static int sis_port_base(struct ata_device *adev) /** * sis_133_cable_detect - check for 40/80 pin * @ap: Port + * @deadline: deadline jiffies for the operation * * Perform cable detection for the later UDMA133 capable * SiS chipset. @@ -108,6 +109,7 @@ static int sis_133_cable_detect(struct ata_port *ap) /** * sis_66_cable_detect - check for 40/80 pin * @ap: Port + * @deadline: deadline jiffies for the operation * * Perform cable detection on the UDMA66, UDMA100 and early UDMA133 * SiS IDE controllers. @@ -130,11 +132,12 @@ static int sis_66_cable_detect(struct ata_port *ap) /** * sis_pre_reset - probe begin * @ap: ATA port + * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int sis_pre_reset(struct ata_port *ap) +static int sis_pre_reset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits sis_enable_bits[] = { { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ @@ -145,7 +148,8 @@ static int sis_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index da9e22b25753..9aeffdbe2829 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -44,11 +44,12 @@ enum { /** * sl82c105_pre_reset - probe begin * @ap: ATA port + * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int sl82c105_pre_reset(struct ata_port *ap) +static int sl82c105_pre_reset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits sl82c105_enable_bits[] = { { 0x40, 1, 0x01, 0x01 }, @@ -58,7 +59,7 @@ static int sl82c105_pre_reset(struct ata_port *ap) if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index e618ffd6e944..349887bf5b93 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c @@ -48,11 +48,12 @@ /** * triflex_prereset - probe begin * @ap: ATA port + * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int triflex_prereset(struct ata_port *ap) +static int triflex_prereset(struct ata_port *ap, unsigned long deadline) { static const struct pci_bits triflex_enable_bits[] = { { 0x80, 1, 0x01, 0x01 }, @@ -63,7 +64,8 @@ static int triflex_prereset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 96b71791d2f4..362beb2f489c 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -154,7 +154,7 @@ static int via_cable_detect(struct ata_port *ap) { return ATA_CBL_PATA40; } -static int via_pre_reset(struct ata_port *ap) +static int via_pre_reset(struct ata_port *ap, unsigned long deadline) { const struct via_isa_bridge *config = ap->host->private_data; @@ -167,7 +167,8 @@ static int via_pre_reset(struct ata_port *ap) if (!pci_test_config_bits(pdev, &via_enable_bits[ap->port_no])) return -ENOENT; } - return ata_std_prereset(ap); + + return ata_std_prereset(ap, deadline); } diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index f099a1d83a00..b3b62e985f19 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -420,7 +420,8 @@ static void inic_thaw(struct ata_port *ap) * SRST and SControl hardreset don't give valid signature on this * controller. Only controller specific hardreset mechanism works. */ -static int inic_hardreset(struct ata_port *ap, unsigned int *class) +static int inic_hardreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { void __iomem *port_base = inic_port_base(ap); void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; @@ -437,7 +438,7 @@ static int inic_hardreset(struct ata_port *ap, unsigned int *class) msleep(1); writew(val & ~IDMA_CTL_RST_ATA, idma_ctl); - rc = sata_phy_resume(ap, timing); + rc = sata_phy_resume(ap, timing, deadline); if (rc) { ata_port_printk(ap, KERN_WARNING, "failed to resume " "link after reset (errno=%d)\n", rc); @@ -451,10 +452,12 @@ static int inic_hardreset(struct ata_port *ap, unsigned int *class) /* wait a while before checking status */ msleep(150); - if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { - ata_port_printk(ap, KERN_WARNING, - "device busy after hardreset\n"); - return -EIO; + rc = ata_wait_ready(ap, deadline); + /* link occupied, -ENODEV too is an error */ + if (rc) { + ata_port_printk(ap, KERN_WARNING, "device not ready " + "after hardreset (errno=%d)\n", rc); + return rc; } ata_tf_read(ap, &tf); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 02169740ed24..e2e795e58236 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -1405,7 +1405,8 @@ static void nv_ck804_thaw(struct ata_port *ap) writeb(mask, mmio_base + NV_INT_ENABLE_CK804); } -static int nv_hardreset(struct ata_port *ap, unsigned int *class) +static int nv_hardreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { unsigned int dummy; @@ -1413,7 +1414,7 @@ static int nv_hardreset(struct ata_port *ap, unsigned int *class) * some controllers. Don't classify on hardreset. For more * info, see http://bugme.osdl.org/show_bug.cgi?id=3352 */ - return sata_std_hardreset(ap, &dummy); + return sata_std_hardreset(ap, &dummy, deadline); } static void nv_error_handler(struct ata_port *ap) diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index e6223ba667da..b97ee9f31aec 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -534,7 +534,8 @@ static int sil24_init_port(struct ata_port *ap) return 0; } -static int sil24_softreset(struct ata_port *ap, unsigned int *class) +static int sil24_softreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { void __iomem *port = ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; @@ -566,7 +567,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT; irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0, - 100, ATA_TMOUT_BOOT / HZ * 1000); + 100, jiffies_to_msecs(deadline - jiffies)); writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */ irq_stat >>= PORT_IRQ_RAW_SHIFT; @@ -594,7 +595,8 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class) return -EIO; } -static int sil24_hardreset(struct ata_port *ap, unsigned int *class) +static int sil24_hardreset(struct ata_port *ap, unsigned int *class, + unsigned long deadline) { void __iomem *port = ap->ioaddr.cmd_addr; const char *reason; @@ -615,7 +617,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) /* SStatus oscillates between zero and valid status after * DEV_RST, debounce it. */ - rc = sata_phy_debounce(ap, sata_deb_timing_long); + rc = sata_phy_debounce(ap, sata_deb_timing_long, deadline); if (rc) { reason = "PHY debouncing failed"; goto err; diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index cc07aac10e8c..17246734fe76 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -288,7 +288,7 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, /* Match it to a port node */ index = (ap == ap->host->ports[0]) ? 0 : 1; for (np = np->child; np != NULL; np = np->sibling) { - const u32 *reg = get_property(np, "reg", NULL); + const u32 *reg = of_get_property(np, "reg", NULL); if (!reg) continue; if (index == *reg) diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 1d855f55f5f7..305ab7c68ca5 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -268,6 +268,7 @@ static void svia_noop_freeze(struct ata_port *ap) /** * vt6420_prereset - prereset for vt6420 * @ap: target ATA port + * @deadline: deadline jiffies for the operation * * SCR registers on vt6420 are pieces of shit and may hang the * whole machine completely if accessed with the wrong timing. @@ -284,7 +285,7 @@ static void svia_noop_freeze(struct ata_port *ap) * RETURNS: * 0 on success, -errno otherwise. */ -static int vt6420_prereset(struct ata_port *ap) +static int vt6420_prereset(struct ata_port *ap, unsigned long deadline) { struct ata_eh_context *ehc = &ap->eh_context; unsigned long timeout = jiffies + (HZ * 5); @@ -329,7 +330,7 @@ static int vt6420_prereset(struct ata_port *ap) skip_scr: /* wait for !BSY */ - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + ata_wait_ready(ap, deadline); return 0; } diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 17b5ece8f82c..eb84d9d44645 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -160,6 +160,11 @@ static void platform_device_release(struct device *dev) * * Create a platform device object which can have other objects attached * to it, and which will have attached objects freed when it is released. + * + * This device will be marked as not supporting hotpluggable drivers; no + * device add/remove uevents will be generated. In the unusual case that + * the device isn't being dynamically allocated as a legacy "probe the + * hardware" driver, infrastructure code should reverse this marking. */ struct platform_device *platform_device_alloc(const char *name, unsigned int id) { @@ -172,6 +177,12 @@ struct platform_device *platform_device_alloc(const char *name, unsigned int id) pa->pdev.id = id; device_initialize(&pa->pdev.dev); pa->pdev.dev.release = platform_device_release; + + /* prevent hotplug "modprobe $(MODALIAS)" from causing trouble in + * legacy probe-the-hardware drivers, which don't properly split + * out device enumeration logic from drivers. + */ + pa->pdev.dev.uevent_suppress = 1; } return pa ? &pa->pdev : NULL; @@ -351,6 +362,13 @@ EXPORT_SYMBOL_GPL(platform_device_unregister); * memory allocated for the device allows drivers using such devices * to be unloaded iwithout waiting for the last reference to the device * to be dropped. + * + * This interface is primarily intended for use with legacy drivers + * which probe hardware directly. Because such drivers create sysfs + * device nodes themselves, rather than letting system infrastructure + * handle such device enumeration tasks, they don't fully conform to + * the Linux driver model. In particular, when such drivers are built + * as modules, they can't be "hotplugged". */ struct platform_device *platform_device_register_simple(char *name, unsigned int id, struct resource *res, unsigned int num) diff --git a/drivers/block/acsi_slm.c b/drivers/block/acsi_slm.c index e2e043290963..1d9d9b4f48cc 100644 --- a/drivers/block/acsi_slm.c +++ b/drivers/block/acsi_slm.c @@ -65,7 +65,6 @@ not be guaranteed. There are several ways to assure this: #include <linux/time.h> #include <linux/mm.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <asm/pgtable.h> #include <asm/system.h> diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 65a725cd3422..370dfe1c422e 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -45,6 +45,10 @@ #include <linux/blkdev.h> #include <linux/genhd.h> #include <linux/completion.h> +#include <scsi/scsi.h> +#include <scsi/sg.h> +#include <scsi/scsi_ioctl.h> +#include <linux/cdrom.h> #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) #define DRIVER_NAME "HP CISS Driver (v 3.6.14)" @@ -1152,6 +1156,30 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, kfree(ioc); return status; } + + /* scsi_cmd_ioctl handles these, below, though some are not */ + /* very meaningful for cciss. SG_IO is the main one people want. */ + + case SG_GET_VERSION_NUM: + case SG_SET_TIMEOUT: + case SG_GET_TIMEOUT: + case SG_GET_RESERVED_SIZE: + case SG_SET_RESERVED_SIZE: + case SG_EMULATED_HOST: + case SG_IO: + case SCSI_IOCTL_SEND_COMMAND: + return scsi_cmd_ioctl(filep, disk, cmd, argp); + + /* scsi_cmd_ioctl would normally handle these, below, but */ + /* they aren't a good fit for cciss, as CD-ROMs are */ + /* not supported, and we don't have any bus/target/lun */ + /* which we present to the kernel. */ + + case CDROM_SEND_PACKET: + case CDROMCLOSETRAY: + case CDROMEJECT: + case SCSI_IOCTL_GET_IDLUN: + case SCSI_IOCTL_GET_BUS_NUMBER: default: return -ENOTTY; } @@ -1234,7 +1262,7 @@ static void cciss_softirq_done(struct request *rq) pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir); } - complete_buffers(rq->bio, rq->errors); + complete_buffers(rq->bio, (rq->errors == 0)); if (blk_fs_request(rq)) { const int rw = rq_data_dir(rq); @@ -1248,7 +1276,7 @@ static void cciss_softirq_done(struct request *rq) add_disk_randomness(rq->rq_disk); spin_lock_irqsave(&h->lock, flags); - end_that_request_last(rq, rq->errors); + end_that_request_last(rq, (rq->errors == 0)); cmd_free(h, cmd, 1); cciss_check_queues(h); spin_unlock_irqrestore(&h->lock, flags); @@ -2336,6 +2364,44 @@ static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c) start_io(h); } +static inline int evaluate_target_status(CommandList_struct *cmd) +{ + unsigned char sense_key; + int error_count = 1; + + if (cmd->err_info->ScsiStatus != 0x02) { /* not check condition? */ + if (!blk_pc_request(cmd->rq)) + printk(KERN_WARNING "cciss: cmd %p " + "has SCSI Status 0x%x\n", + cmd, cmd->err_info->ScsiStatus); + return error_count; + } + + /* check the sense key */ + sense_key = 0xf & cmd->err_info->SenseInfo[2]; + /* no status or recovered error */ + if ((sense_key == 0x0) || (sense_key == 0x1)) + error_count = 0; + + if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */ + if (error_count != 0) + printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION" + " sense key = 0x%x\n", cmd, sense_key); + return error_count; + } + + /* SG_IO or similar, copy sense data back */ + if (cmd->rq->sense) { + if (cmd->rq->sense_len > cmd->err_info->SenseLen) + cmd->rq->sense_len = cmd->err_info->SenseLen; + memcpy(cmd->rq->sense, cmd->err_info->SenseInfo, + cmd->rq->sense_len); + } else + cmd->rq->sense_len = 0; + + return error_count; +} + /* checks the status of the job and calls complete buffers to mark all * buffers for the completed job. Note that this function does not need * to hold the hba/queue lock. @@ -2343,109 +2409,99 @@ static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c) static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd, int timeout) { - int status = 1; int retry_cmd = 0; + struct request *rq = cmd->rq; + + rq->errors = 0; if (timeout) - status = 0; + rq->errors = 1; - if (cmd->err_info->CommandStatus != 0) { /* an error has occurred */ - switch (cmd->err_info->CommandStatus) { - unsigned char sense_key; - case CMD_TARGET_STATUS: - status = 0; + if (cmd->err_info->CommandStatus == 0) /* no error has occurred */ + goto after_error_processing; - if (cmd->err_info->ScsiStatus == 0x02) { - printk(KERN_WARNING "cciss: cmd %p " - "has CHECK CONDITION " - " byte 2 = 0x%x\n", cmd, - cmd->err_info->SenseInfo[2] - ); - /* check the sense key */ - sense_key = 0xf & cmd->err_info->SenseInfo[2]; - /* no status or recovered error */ - if ((sense_key == 0x0) || (sense_key == 0x1)) { - status = 1; - } - } else { - printk(KERN_WARNING "cciss: cmd %p " - "has SCSI Status 0x%x\n", - cmd, cmd->err_info->ScsiStatus); - } - break; - case CMD_DATA_UNDERRUN: + switch (cmd->err_info->CommandStatus) { + case CMD_TARGET_STATUS: + rq->errors = evaluate_target_status(cmd); + break; + case CMD_DATA_UNDERRUN: + if (blk_fs_request(cmd->rq)) { printk(KERN_WARNING "cciss: cmd %p has" " completed with data underrun " "reported\n", cmd); - break; - case CMD_DATA_OVERRUN: + cmd->rq->data_len = cmd->err_info->ResidualCnt; + } + break; + case CMD_DATA_OVERRUN: + if (blk_fs_request(cmd->rq)) printk(KERN_WARNING "cciss: cmd %p has" " completed with data overrun " "reported\n", cmd); - break; - case CMD_INVALID: - printk(KERN_WARNING "cciss: cmd %p is " - "reported invalid\n", cmd); - status = 0; - break; - case CMD_PROTOCOL_ERR: - printk(KERN_WARNING "cciss: cmd %p has " - "protocol error \n", cmd); - status = 0; - break; - case CMD_HARDWARE_ERR: - printk(KERN_WARNING "cciss: cmd %p had " - " hardware error\n", cmd); - status = 0; - break; - case CMD_CONNECTION_LOST: - printk(KERN_WARNING "cciss: cmd %p had " - "connection lost\n", cmd); - status = 0; - break; - case CMD_ABORTED: - printk(KERN_WARNING "cciss: cmd %p was " - "aborted\n", cmd); - status = 0; - break; - case CMD_ABORT_FAILED: - printk(KERN_WARNING "cciss: cmd %p reports " - "abort failed\n", cmd); - status = 0; - break; - case CMD_UNSOLICITED_ABORT: - printk(KERN_WARNING "cciss%d: unsolicited " - "abort %p\n", h->ctlr, cmd); - if (cmd->retry_count < MAX_CMD_RETRIES) { - retry_cmd = 1; - printk(KERN_WARNING - "cciss%d: retrying %p\n", h->ctlr, cmd); - cmd->retry_count++; - } else - printk(KERN_WARNING - "cciss%d: %p retried too " - "many times\n", h->ctlr, cmd); - status = 0; - break; - case CMD_TIMEOUT: - printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd); - status = 0; - break; - default: - printk(KERN_WARNING "cciss: cmd %p returned " - "unknown status %x\n", cmd, - cmd->err_info->CommandStatus); - status = 0; - } + break; + case CMD_INVALID: + printk(KERN_WARNING "cciss: cmd %p is " + "reported invalid\n", cmd); + rq->errors = 1; + break; + case CMD_PROTOCOL_ERR: + printk(KERN_WARNING "cciss: cmd %p has " + "protocol error \n", cmd); + rq->errors = 1; + break; + case CMD_HARDWARE_ERR: + printk(KERN_WARNING "cciss: cmd %p had " + " hardware error\n", cmd); + rq->errors = 1; + break; + case CMD_CONNECTION_LOST: + printk(KERN_WARNING "cciss: cmd %p had " + "connection lost\n", cmd); + rq->errors = 1; + break; + case CMD_ABORTED: + printk(KERN_WARNING "cciss: cmd %p was " + "aborted\n", cmd); + rq->errors = 1; + break; + case CMD_ABORT_FAILED: + printk(KERN_WARNING "cciss: cmd %p reports " + "abort failed\n", cmd); + rq->errors = 1; + break; + case CMD_UNSOLICITED_ABORT: + printk(KERN_WARNING "cciss%d: unsolicited " + "abort %p\n", h->ctlr, cmd); + if (cmd->retry_count < MAX_CMD_RETRIES) { + retry_cmd = 1; + printk(KERN_WARNING + "cciss%d: retrying %p\n", h->ctlr, cmd); + cmd->retry_count++; + } else + printk(KERN_WARNING + "cciss%d: %p retried too " + "many times\n", h->ctlr, cmd); + rq->errors = 1; + break; + case CMD_TIMEOUT: + printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd); + rq->errors = 1; + break; + default: + printk(KERN_WARNING "cciss: cmd %p returned " + "unknown status %x\n", cmd, + cmd->err_info->CommandStatus); + rq->errors = 1; } + +after_error_processing: + /* We need to return this command */ if (retry_cmd) { resend_cciss_cmd(h, cmd); return; } - + cmd->rq->data_len = 0; cmd->rq->completion_data = cmd; - cmd->rq->errors = status; blk_add_trace_rq(cmd->rq->q, cmd->rq, BLK_TA_COMPLETE); blk_complete_request(cmd->rq); } @@ -2539,32 +2595,40 @@ static void do_cciss_request(request_queue_t *q) #endif /* CCISS_DEBUG */ c->Header.SGList = c->Header.SGTotal = seg; - if(h->cciss_read == CCISS_READ_10) { - c->Request.CDB[1] = 0; - c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB - c->Request.CDB[3] = (start_blk >> 16) & 0xff; - c->Request.CDB[4] = (start_blk >> 8) & 0xff; - c->Request.CDB[5] = start_blk & 0xff; - c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB - c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff; - c->Request.CDB[8] = creq->nr_sectors & 0xff; - c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0; + if (likely(blk_fs_request(creq))) { + if(h->cciss_read == CCISS_READ_10) { + c->Request.CDB[1] = 0; + c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB + c->Request.CDB[3] = (start_blk >> 16) & 0xff; + c->Request.CDB[4] = (start_blk >> 8) & 0xff; + c->Request.CDB[5] = start_blk & 0xff; + c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB + c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff; + c->Request.CDB[8] = creq->nr_sectors & 0xff; + c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0; + } else { + c->Request.CDBLen = 16; + c->Request.CDB[1]= 0; + c->Request.CDB[2]= (start_blk >> 56) & 0xff; //MSB + c->Request.CDB[3]= (start_blk >> 48) & 0xff; + c->Request.CDB[4]= (start_blk >> 40) & 0xff; + c->Request.CDB[5]= (start_blk >> 32) & 0xff; + c->Request.CDB[6]= (start_blk >> 24) & 0xff; + c->Request.CDB[7]= (start_blk >> 16) & 0xff; + c->Request.CDB[8]= (start_blk >> 8) & 0xff; + c->Request.CDB[9]= start_blk & 0xff; + c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff; + c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff; + c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff; + c->Request.CDB[13]= creq->nr_sectors & 0xff; + c->Request.CDB[14] = c->Request.CDB[15] = 0; + } + } else if (blk_pc_request(creq)) { + c->Request.CDBLen = creq->cmd_len; + memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB); } else { - c->Request.CDBLen = 16; - c->Request.CDB[1]= 0; - c->Request.CDB[2]= (start_blk >> 56) & 0xff; //MSB - c->Request.CDB[3]= (start_blk >> 48) & 0xff; - c->Request.CDB[4]= (start_blk >> 40) & 0xff; - c->Request.CDB[5]= (start_blk >> 32) & 0xff; - c->Request.CDB[6]= (start_blk >> 24) & 0xff; - c->Request.CDB[7]= (start_blk >> 16) & 0xff; - c->Request.CDB[8]= (start_blk >> 8) & 0xff; - c->Request.CDB[9]= start_blk & 0xff; - c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff; - c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff; - c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff; - c->Request.CDB[13]= creq->nr_sectors & 0xff; - c->Request.CDB[14] = c->Request.CDB[15] = 0; + printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type); + BUG(); } spin_lock_irq(q->queue_lock); diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index bb15051ffbe0..90961a8ea895 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -35,7 +35,6 @@ #include <asm/atomic.h> -#include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> #include <scsi/scsi_host.h> diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 5231ed7e723f..3587cb434371 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4334,7 +4334,10 @@ static int __init floppy_init(void) if (err) goto out_flush_work; - device_create_file(&floppy_device[drive].dev,&dev_attr_cmos); + err = device_create_file(&floppy_device[drive].dev,&dev_attr_cmos); + if (err) + goto out_unreg_platform_dev; + /* to be cleaned up... */ disks[drive]->private_data = (void *)(long)drive; disks[drive]->queue = floppy_queue; @@ -4345,6 +4348,8 @@ static int __init floppy_init(void) return 0; +out_unreg_platform_dev: + platform_device_unregister(&floppy_device[drive]); out_flush_work: flush_scheduled_work(); if (usage_count) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 0d4ccd4a0957..af6d7274a7cc 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -77,9 +77,8 @@ #include <asm/uaccess.h> -static int max_loop = 8; -static struct loop_device *loop_dev; -static struct gendisk **disks; +static LIST_HEAD(loop_devices); +static DEFINE_MUTEX(loop_devices_mutex); /* * Transfer functions @@ -183,7 +182,7 @@ figure_loop_size(struct loop_device *lo) if (unlikely((loff_t)x != size)) return -EFBIG; - set_capacity(disks[lo->lo_number], x); + set_capacity(lo->lo_disk, x); return 0; } @@ -812,7 +811,7 @@ static int loop_set_fd(struct loop_device *lo, struct file *lo_file, lo->lo_queue->queuedata = lo; lo->lo_queue->unplug_fn = loop_unplug; - set_capacity(disks[lo->lo_number], size); + set_capacity(lo->lo_disk, size); bd_set_size(bdev, size << 9); set_blocksize(bdev, lo_blocksize); @@ -832,7 +831,7 @@ out_clr: lo->lo_device = NULL; lo->lo_backing_file = NULL; lo->lo_flags = 0; - set_capacity(disks[lo->lo_number], 0); + set_capacity(lo->lo_disk, 0); invalidate_bdev(bdev); bd_set_size(bdev, 0); mapping_set_gfp_mask(mapping, lo->old_gfp_mask); @@ -918,7 +917,7 @@ static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev) memset(lo->lo_crypt_name, 0, LO_NAME_SIZE); memset(lo->lo_file_name, 0, LO_NAME_SIZE); invalidate_bdev(bdev); - set_capacity(disks[lo->lo_number], 0); + set_capacity(lo->lo_disk, 0); bd_set_size(bdev, 0); mapping_set_gfp_mask(filp->f_mapping, gfp); lo->lo_state = Lo_unbound; @@ -1322,6 +1321,18 @@ static long lo_compat_ioctl(struct file *file, unsigned int cmd, unsigned long a } #endif +static struct loop_device *loop_find_dev(int number) +{ + struct loop_device *lo; + + list_for_each_entry(lo, &loop_devices, lo_list) { + if (lo->lo_number == number) + return lo; + } + return NULL; +} + +static struct loop_device *loop_init_one(int i); static int lo_open(struct inode *inode, struct file *file) { struct loop_device *lo = inode->i_bdev->bd_disk->private_data; @@ -1330,6 +1341,11 @@ static int lo_open(struct inode *inode, struct file *file) lo->lo_refcnt++; mutex_unlock(&lo->lo_ctl_mutex); + mutex_lock(&loop_devices_mutex); + if (!loop_find_dev(lo->lo_number + 1)) + loop_init_one(lo->lo_number + 1); + mutex_unlock(&loop_devices_mutex); + return 0; } @@ -1357,8 +1373,9 @@ static struct block_device_operations lo_fops = { /* * And now the modules code and kernel interface. */ +static int max_loop; module_param(max_loop, int, 0); -MODULE_PARM_DESC(max_loop, "Maximum number of loop devices (1-256)"); +MODULE_PARM_DESC(max_loop, "obsolete, loop device is created on-demand"); MODULE_LICENSE("GPL"); MODULE_ALIAS_BLOCKDEV_MAJOR(LOOP_MAJOR); @@ -1383,7 +1400,7 @@ int loop_unregister_transfer(int number) xfer_funcs[n] = NULL; - for (lo = &loop_dev[0]; lo < &loop_dev[max_loop]; lo++) { + list_for_each_entry(lo, &loop_devices, lo_list) { mutex_lock(&lo->lo_ctl_mutex); if (lo->lo_encryption == xfer) @@ -1398,91 +1415,110 @@ int loop_unregister_transfer(int number) EXPORT_SYMBOL(loop_register_transfer); EXPORT_SYMBOL(loop_unregister_transfer); -static int __init loop_init(void) +static struct loop_device *loop_init_one(int i) +{ + struct loop_device *lo; + struct gendisk *disk; + + lo = kzalloc(sizeof(*lo), GFP_KERNEL); + if (!lo) + goto out; + + lo->lo_queue = blk_alloc_queue(GFP_KERNEL); + if (!lo->lo_queue) + goto out_free_dev; + + disk = lo->lo_disk = alloc_disk(1); + if (!disk) + goto out_free_queue; + + mutex_init(&lo->lo_ctl_mutex); + lo->lo_number = i; + lo->lo_thread = NULL; + init_waitqueue_head(&lo->lo_event); + spin_lock_init(&lo->lo_lock); + disk->major = LOOP_MAJOR; + disk->first_minor = i; + disk->fops = &lo_fops; + disk->private_data = lo; + disk->queue = lo->lo_queue; + sprintf(disk->disk_name, "loop%d", i); + add_disk(disk); + list_add_tail(&lo->lo_list, &loop_devices); + return lo; + +out_free_queue: + blk_cleanup_queue(lo->lo_queue); +out_free_dev: + kfree(lo); +out: + return ERR_PTR(-ENOMEM); +} + +static void loop_del_one(struct loop_device *lo) { - int i; + del_gendisk(lo->lo_disk); + blk_cleanup_queue(lo->lo_queue); + put_disk(lo->lo_disk); + list_del(&lo->lo_list); + kfree(lo); +} - if (max_loop < 1 || max_loop > 256) { - printk(KERN_WARNING "loop: invalid max_loop (must be between" - " 1 and 256), using default (8)\n"); - max_loop = 8; - } +static struct kobject *loop_probe(dev_t dev, int *part, void *data) +{ + unsigned int number = dev & MINORMASK; + struct loop_device *lo; + + mutex_lock(&loop_devices_mutex); + lo = loop_find_dev(number); + if (lo == NULL) + lo = loop_init_one(number); + mutex_unlock(&loop_devices_mutex); + + *part = 0; + if (IS_ERR(lo)) + return (void *)lo; + else + return &lo->lo_disk->kobj; +} + +static int __init loop_init(void) +{ + struct loop_device *lo; if (register_blkdev(LOOP_MAJOR, "loop")) return -EIO; + blk_register_region(MKDEV(LOOP_MAJOR, 0), 1UL << MINORBITS, + THIS_MODULE, loop_probe, NULL, NULL); - loop_dev = kmalloc(max_loop * sizeof(struct loop_device), GFP_KERNEL); - if (!loop_dev) - goto out_mem1; - memset(loop_dev, 0, max_loop * sizeof(struct loop_device)); + lo = loop_init_one(0); + if (IS_ERR(lo)) + goto out; - disks = kmalloc(max_loop * sizeof(struct gendisk *), GFP_KERNEL); - if (!disks) - goto out_mem2; + if (max_loop) { + printk(KERN_INFO "loop: the max_loop option is obsolete " + "and will be removed in March 2008\n"); - for (i = 0; i < max_loop; i++) { - disks[i] = alloc_disk(1); - if (!disks[i]) - goto out_mem3; } - - for (i = 0; i < max_loop; i++) { - struct loop_device *lo = &loop_dev[i]; - struct gendisk *disk = disks[i]; - - memset(lo, 0, sizeof(*lo)); - lo->lo_queue = blk_alloc_queue(GFP_KERNEL); - if (!lo->lo_queue) - goto out_mem4; - mutex_init(&lo->lo_ctl_mutex); - lo->lo_number = i; - lo->lo_thread = NULL; - init_waitqueue_head(&lo->lo_event); - spin_lock_init(&lo->lo_lock); - disk->major = LOOP_MAJOR; - disk->first_minor = i; - disk->fops = &lo_fops; - sprintf(disk->disk_name, "loop%d", i); - disk->private_data = lo; - disk->queue = lo->lo_queue; - } - - /* We cannot fail after we call this, so another loop!*/ - for (i = 0; i < max_loop; i++) - add_disk(disks[i]); - printk(KERN_INFO "loop: loaded (max %d devices)\n", max_loop); + printk(KERN_INFO "loop: module loaded\n"); return 0; -out_mem4: - while (i--) - blk_cleanup_queue(loop_dev[i].lo_queue); - i = max_loop; -out_mem3: - while (i--) - put_disk(disks[i]); - kfree(disks); -out_mem2: - kfree(loop_dev); -out_mem1: +out: unregister_blkdev(LOOP_MAJOR, "loop"); printk(KERN_ERR "loop: ran out of memory\n"); return -ENOMEM; } -static void loop_exit(void) +static void __exit loop_exit(void) { - int i; + struct loop_device *lo, *next; - for (i = 0; i < max_loop; i++) { - del_gendisk(disks[i]); - blk_cleanup_queue(loop_dev[i].lo_queue); - put_disk(disks[i]); - } + list_for_each_entry_safe(lo, next, &loop_devices, lo_list) + loop_del_one(lo); + + blk_unregister_region(MKDEV(LOOP_MAJOR, 0), 1UL << MINORBITS); if (unregister_blkdev(LOOP_MAJOR, "loop")) printk(KERN_WARNING "loop: cannot unregister blkdev\n"); - - kfree(disks); - kfree(loop_dev); } module_init(loop_init); diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 5872036e8ae6..6f5d6203d725 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -44,7 +44,6 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <linux/smp_lock.h> #include <linux/timer.h> #include <linux/pci.h> #include <linux/slab.h> diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index a26d91743b24..1e32fb834eb8 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -127,7 +127,7 @@ config ROCKETPORT config CYCLADES tristate "Cyclades async mux support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && (PCI || ISA) ---help--- This driver supports Cyclades Z and Y multiserial boards. You would need something like this to connect more than two modems to @@ -1071,5 +1071,11 @@ config TELCLOCK /sys/devices/platform/telco_clock, with a number of files for controlling the behavior of this hardware. +config DEVPORT + bool + depends on !M68K + depends on ISA || PCI + default y + endmenu diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 91b062126a68..42c0a600b1ac 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -613,7 +613,7 @@ static int __devinit agp_uninorth_probe(struct pci_dev *pdev, uninorth_node = of_find_node_by_name(NULL, "u3"); } if (uninorth_node) { - const int *revprop = get_property(uninorth_node, + const int *revprop = of_get_property(uninorth_node, "device-rev", NULL); if (revprop != NULL) uninorth_rev = *revprop & 0x3f; diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 0e2b72f2b887..4eaceabd8cea 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1574,7 +1574,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) if (timeout && time_after(jiffies, orig_jiffies + timeout)) break; } - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); #endif @@ -1700,7 +1700,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, #endif schedule(); } - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); if (extra_count) state->count++; diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c index c70d52ace8b2..ed53f541d9e8 100644 --- a/drivers/char/briq_panel.c +++ b/drivers/char/briq_panel.c @@ -206,7 +206,7 @@ static int __init briq_panel_init(void) const char *machine; int i; - machine = get_property(root, "model", NULL); + machine = of_get_property(root, "model", NULL); if (!machine || strncmp(machine, "TotalImpact,BRIQ-1", 18) != 0) { of_node_put(root); return -ENODEV; diff --git a/drivers/char/consolemap.c b/drivers/char/consolemap.c index b99b7561260d..fd40b959afdd 100644 --- a/drivers/char/consolemap.c +++ b/drivers/char/consolemap.c @@ -626,10 +626,10 @@ conv_uni_to_pc(struct vc_data *conp, long ucs) /* Only 16-bit codes supported at this time */ if (ucs > 0xffff) - ucs = 0xfffd; /* U+FFFD: REPLACEMENT CHARACTER */ - else if (ucs < 0x20 || ucs >= 0xfffe) + return -4; /* Not found */ + else if (ucs < 0x20) return -1; /* Not a printable character */ - else if (ucs == 0xfeff || (ucs >= 0x200a && ucs <= 0x200f)) + else if (ucs == 0xfeff || (ucs >= 0x200b && ucs <= 0x200f)) return -2; /* Zero-width space */ /* * UNI_DIRECT_BASE indicates the start of the region in the User Zone diff --git a/drivers/char/cs5535_gpio.c b/drivers/char/cs5535_gpio.c index c02d9e99e050..fe6d2407baed 100644 --- a/drivers/char/cs5535_gpio.c +++ b/drivers/char/cs5535_gpio.c @@ -44,6 +44,7 @@ static struct pci_device_id divil_pci[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, { } /* NULL entry */ }; +MODULE_DEVICE_TABLE(pci, divil_pci); static struct cdev cs5535_gpio_cdev; diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index 16dc5d1d3cb4..c72ee97d3892 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -10,15 +10,14 @@ * * Initially written by Randolph Bentson <bentson@grieg.seaslug.org>. * Modified and maintained by Marcio Saito <marcio@cyclades.com>. - * Currently maintained by Cyclades team <async@cyclades.com>. * - * For Technical support and installation problems, please send e-mail - * to support@cyclades.com. + * Copyright (C) 2007 Jiri Slaby <jirislaby@gmail.com> * * Much of the design and some of the code came from serial.c * which was copyright (C) 1991, 1992 Linus Torvalds. It was * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92, * and then fixed as suggested by Michael K. Johnson 12/12/92. + * Converted to pci probing and cleaned up by Jiri Slaby. * * This version supports shared IRQ's (only for PCI boards). * @@ -591,7 +590,7 @@ * */ -#define CY_VERSION "2.4" +#define CY_VERSION "2.5" /* If you need to install more boards than NR_CARDS, change the constant in the definition below. No other change is necessary to support up to @@ -624,12 +623,6 @@ #undef CY_ENABLE_MONITORING #undef CY_PCI_DEBUG -#if 0 -#define PAUSE __asm__("nop") -#else -#define PAUSE do {} while (0) -#endif - /* * Include section */ @@ -659,17 +652,6 @@ #include <asm/irq.h> #include <asm/uaccess.h> -#define CY_LOCK(info,flags) \ - do { \ - spin_lock_irqsave(&cy_card[info->card].card_lock, flags); \ - } while (0) - -#define CY_UNLOCK(info,flags) \ - do { \ - spin_unlock_irqrestore(&cy_card[info->card].card_lock, flags); \ - } while (0) - -#include <linux/types.h> #include <linux/kernel.h> #include <linux/pci.h> @@ -682,13 +664,13 @@ static void cy_send_xchar(struct tty_struct *tty, char ch); #define IS_CYC_Z(card) ((card).num_chips == -1) #define Z_FPGA_CHECK(card) \ - ((cy_readl(&((struct RUNTIME_9060 __iomem *) \ + ((readl(&((struct RUNTIME_9060 __iomem *) \ ((card).ctl_addr))->init_ctrl) & (1<<17)) != 0) -#define ISZLOADED(card) (((ZO_V1==cy_readl(&((struct RUNTIME_9060 __iomem *) \ +#define ISZLOADED(card) (((ZO_V1==readl(&((struct RUNTIME_9060 __iomem *) \ ((card).ctl_addr))->mail_box_0)) || \ Z_FPGA_CHECK(card)) && \ - (ZFIRM_ID==cy_readl(&((struct FIRM_ID __iomem *) \ + (ZFIRM_ID==readl(&((struct FIRM_ID __iomem *) \ ((card).base_addr+ID_ADDRESS))->signature))) #ifndef SERIAL_XMIT_SIZE @@ -725,8 +707,8 @@ static unsigned int cy_isa_addresses[] = { #define NR_ISA_ADDRS ARRAY_SIZE(cy_isa_addresses) #ifdef MODULE -static long maddr[NR_CARDS] = { 0, }; -static int irq[NR_CARDS] = { 0, }; +static long maddr[NR_CARDS]; +static int irq[NR_CARDS]; module_param_array(maddr, long, NULL, 0); module_param_array(irq, int, NULL, 0); @@ -739,11 +721,6 @@ module_param_array(irq, int, NULL, 0); */ static struct cyclades_card cy_card[NR_CARDS]; -/* This is the per-channel data structure containing pointers, flags - and variables for the port. This driver supports a maximum of NR_PORTS. -*/ -static struct cyclades_port cy_port[NR_PORTS]; - static int cy_next_channel; /* next minor available */ /* @@ -825,9 +802,6 @@ static int cy_chip_offset[] = { 0x0000, /* PCI related definitions */ -static unsigned short cy_pci_nboard; -static unsigned short cy_isa_nboard; -static unsigned short cy_nboard; #ifdef CONFIG_PCI static struct pci_device_id cy_pci_dev_id[] __devinitdata = { { PCI_DEVICE(PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_CYCLOM_Y_Lo) }, /* PCI < 1Mb */ @@ -845,7 +819,7 @@ MODULE_DEVICE_TABLE(pci, cy_pci_dev_id); static void cy_start(struct tty_struct *); static void set_line_char(struct cyclades_port *); -static int cyz_issue_cmd(struct cyclades_card *, uclong, ucchar, uclong); +static int cyz_issue_cmd(struct cyclades_card *, __u32, __u8, __u32); #ifdef CONFIG_ISA static unsigned detect_isa_irq(void __iomem *); #endif /* CONFIG_ISA */ @@ -858,7 +832,6 @@ static void cyz_poll(unsigned long); /* The Cyclades-Z polling cycle is defined by this variable */ static long cyz_polling_cycle = CZ_DEF_POLL; -static int cyz_timeron = 0; static DEFINE_TIMER(cyz_timerlist, cyz_poll, 0, 0); #else /* CONFIG_CYZ_INTR */ @@ -871,21 +844,14 @@ static inline int serial_paranoia_check(struct cyclades_port *info, { #ifdef SERIAL_PARANOIA_CHECK if (!info) { - printk("cyc Warning: null cyclades_port for (%s) in %s\n", - name, routine); - return 1; - } - - if ((long)info < (long)(&cy_port[0]) || - (long)(&cy_port[NR_PORTS]) < (long)info) { - printk("cyc Warning: cyclades_port out of range for (%s) in " - "%s\n", name, routine); + printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) " + "in %s\n", name, routine); return 1; } if (info->magic != CYCLADES_MAGIC) { - printk("cyc Warning: bad magic number for serial struct (%s) " - "in %s\n", name, routine); + printk(KERN_WARNING "cyc Warning: bad magic number for serial " + "struct (%s) in %s\n", name, routine); return 1; } #endif @@ -943,22 +909,16 @@ do_softint(struct work_struct *work) if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) wake_up_interruptible(&info->open_wait); #ifdef CONFIG_CYZ_INTR - if (test_and_clear_bit(Cy_EVENT_Z_RX_FULL, &info->event)) { - if (cyz_rx_full_timer[info->line].function == NULL) { - cyz_rx_full_timer[info->line].expires = jiffies + 1; - cyz_rx_full_timer[info->line].function = cyz_rx_restart; - cyz_rx_full_timer[info->line].data = - (unsigned long)info; - add_timer(&cyz_rx_full_timer[info->line]); - } - } + if (test_and_clear_bit(Cy_EVENT_Z_RX_FULL, &info->event) && + !timer_pending(&cyz_rx_full_timer[info->line])) + mod_timer(&cyz_rx_full_timer[info->line], jiffies + 1); #endif if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) wake_up_interruptible(&info->delta_msr_wait); tty_wakeup(tty); #ifdef Z_WAKE if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) - wake_up_interruptible(&info->shutdown_wait); + complete(&info->shutdown_wait); #endif } /* do_softint */ @@ -975,11 +935,11 @@ do_softint(struct work_struct *work) */ static int cyy_issue_cmd(void __iomem * base_addr, u_char cmd, int index) { - volatile int i; + unsigned int i; /* Check to see that the previous command has completed */ for (i = 0; i < 100; i++) { - if (cy_readb(base_addr + (CyCCR << index)) == 0) { + if (readb(base_addr + (CyCCR << index)) == 0) { break; } udelay(10L); @@ -1022,7 +982,7 @@ static unsigned detect_isa_irq(void __iomem * address) cy_writeb(address + (CyCAR << index), 0); cy_writeb(address + (CySRER << index), - cy_readb(address + (CySRER << index)) | CyTxRdy); + readb(address + (CySRER << index)) | CyTxRdy); local_irq_restore(flags); /* Wait ... */ @@ -1032,11 +992,11 @@ static unsigned detect_isa_irq(void __iomem * address) irq = probe_irq_off(irqs); /* Clean up */ - save_xir = (u_char) cy_readb(address + (CyTIR << index)); - save_car = cy_readb(address + (CyCAR << index)); + save_xir = (u_char) readb(address + (CyTIR << index)); + save_car = readb(address + (CyCAR << index)); cy_writeb(address + (CyCAR << index), (save_xir & 0x3)); cy_writeb(address + (CySRER << index), - cy_readb(address + (CySRER << index)) & ~CyTxRdy); + readb(address + (CySRER << index)) & ~CyTxRdy); cy_writeb(address + (CyTIR << index), (save_xir & 0x3f)); cy_writeb(address + (CyCAR << index), (save_car)); cy_writeb(address + (Cy_ClrIntr << index), 0); @@ -1051,45 +1011,43 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, { struct cyclades_port *info; struct tty_struct *tty; - volatile int char_count; - int i, j, len, mdm_change, mdm_status, outch; + int char_count; + int j, len, mdm_change, mdm_status, outch; int save_xir, channel, save_car; char data; if (status & CySRReceive) { /* reception interrupt */ #ifdef CY_DEBUG_INTERRUPTS - printk("cyy_interrupt: rcvd intr, chip %d\n\r", chip); + printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip); #endif /* determine the channel & change to that context */ spin_lock(&cinfo->card_lock); - save_xir = (u_char) cy_readb(base_addr + (CyRIR << index)); + save_xir = (u_char) readb(base_addr + (CyRIR << index)); channel = (u_short) (save_xir & CyIRChannel); - i = channel + chip * 4 + cinfo->first_line; - info = &cy_port[i]; - info->last_active = jiffies; - save_car = cy_readb(base_addr + (CyCAR << index)); + info = &cinfo->ports[channel + chip * 4]; + save_car = readb(base_addr + (CyCAR << index)); cy_writeb(base_addr + (CyCAR << index), save_xir); /* if there is nowhere to put the data, discard it */ - if (info->tty == 0) { - j = (cy_readb(base_addr + (CyRIVR << index)) & + if (info->tty == NULL) { + j = (readb(base_addr + (CyRIVR << index)) & CyIVRMask); if (j == CyIVRRxEx) { /* exception */ - data = cy_readb(base_addr + (CyRDSR << index)); + data = readb(base_addr + (CyRDSR << index)); } else { /* normal character reception */ - char_count = cy_readb(base_addr + + char_count = readb(base_addr + (CyRDCR << index)); while (char_count--) { - data = cy_readb(base_addr + + data = readb(base_addr + (CyRDSR << index)); } } } else { /* there is an open port for this data */ tty = info->tty; - j = (cy_readb(base_addr + (CyRIVR << index)) & + j = (readb(base_addr + (CyRIVR << index)) & CyIVRMask); if (j == CyIVRRxEx) { /* exception */ - data = cy_readb(base_addr + (CyRDSR << index)); + data = readb(base_addr + (CyRDSR << index)); /* For statistics only */ if (data & CyBREAK) @@ -1110,7 +1068,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, if (data & CyBREAK) { tty_insert_flip_char( tty, - cy_readb( + readb( base_addr + (CyRDSR << index)), @@ -1123,7 +1081,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, } else if (data & CyFRAME) { tty_insert_flip_char( tty, - cy_readb( + readb( base_addr + (CyRDSR << index)), @@ -1135,7 +1093,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, /* Pieces of seven... */ tty_insert_flip_char( tty, - cy_readb( + readb( base_addr + (CyRDSR << index)), @@ -1154,7 +1112,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, */ tty_insert_flip_char( tty, - cy_readb( + readb( base_addr + (CyRDSR << index)), @@ -1186,7 +1144,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, } } else { /* normal character reception */ /* load # chars available from the chip */ - char_count = cy_readb(base_addr + + char_count = readb(base_addr + (CyRDCR << index)); #ifdef CY_ENABLE_MONITORING @@ -1198,7 +1156,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, #endif len = tty_buffer_request_room(tty, char_count); while (len--) { - data = cy_readb(base_addr + + data = readb(base_addr + (CyRDSR << index)); tty_insert_flip_char(tty, data, TTY_NORMAL); @@ -1223,29 +1181,27 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, is empty, we know we can always stuff a dozen characters. */ #ifdef CY_DEBUG_INTERRUPTS - printk("cyy_interrupt: xmit intr, chip %d\n\r", chip); + printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip); #endif /* determine the channel & change to that context */ spin_lock(&cinfo->card_lock); - save_xir = (u_char) cy_readb(base_addr + (CyTIR << index)); + save_xir = (u_char) readb(base_addr + (CyTIR << index)); channel = (u_short) (save_xir & CyIRChannel); - i = channel + chip * 4 + cinfo->first_line; - save_car = cy_readb(base_addr + (CyCAR << index)); + save_car = readb(base_addr + (CyCAR << index)); cy_writeb(base_addr + (CyCAR << index), save_xir); /* validate the port# (as configured and open) */ - if ((i < 0) || (NR_PORTS <= i)) { + if (channel + chip * 4 >= cinfo->nports) { cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + (CySRER << index)) & + readb(base_addr + (CySRER << index)) & ~CyTxRdy); goto txend; } - info = &cy_port[i]; - info->last_active = jiffies; - if (info->tty == 0) { + info = &cinfo->ports[channel + chip * 4]; + if (info->tty == NULL) { cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + (CySRER << index)) & + readb(base_addr + (CySRER << index)) & ~CyTxRdy); goto txdone; } @@ -1278,29 +1234,29 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, while (char_count-- > 0) { if (!info->xmit_cnt) { - if (cy_readb(base_addr + (CySRER << index)) & + if (readb(base_addr + (CySRER << index)) & CyTxMpty) { cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + + readb(base_addr + (CySRER << index)) & ~CyTxMpty); } else { cy_writeb(base_addr + (CySRER << index), - (cy_readb(base_addr + + (readb(base_addr + (CySRER << index)) & ~CyTxRdy) | CyTxMpty); } goto txdone; } - if (info->xmit_buf == 0) { + if (info->xmit_buf == NULL) { cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + (CySRER << index))& + readb(base_addr + (CySRER << index)) & ~CyTxRdy); goto txdone; } if (info->tty->stopped || info->tty->hw_stopped) { cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + (CySRER << index))& + readb(base_addr + (CySRER << index)) & ~CyTxRdy); goto txdone; } @@ -1333,7 +1289,6 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, 0); info->icount.tx++; char_count--; - } else { } } } @@ -1353,19 +1308,16 @@ txend: /* determine the channel & change to that context */ spin_lock(&cinfo->card_lock); - save_xir = (u_char) cy_readb(base_addr + (CyMIR << index)); + save_xir = (u_char) readb(base_addr + (CyMIR << index)); channel = (u_short) (save_xir & CyIRChannel); - info = &cy_port[channel + chip * 4 + cinfo->first_line]; - info->last_active = jiffies; - save_car = cy_readb(base_addr + (CyCAR << index)); + info = &cinfo->ports[channel + chip * 4]; + save_car = readb(base_addr + (CyCAR << index)); cy_writeb(base_addr + (CyCAR << index), save_xir); - mdm_change = cy_readb(base_addr + (CyMISR << index)); - mdm_status = cy_readb(base_addr + (CyMSVR1 << index)); + mdm_change = readb(base_addr + (CyMISR << index)); + mdm_status = readb(base_addr + (CyMSVR1 << index)); - if (info->tty == 0) { /* no place for data, ignore it */ - ; - } else { + if (info->tty) { if (mdm_change & CyANY_DELTA) { /* For statistics only */ if (mdm_change & CyDCD) @@ -1398,7 +1350,7 @@ txend: info->tty->hw_stopped = 0; cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + + readb(base_addr + (CySRER << index))| CyTxRdy); @@ -1412,17 +1364,17 @@ txend: info->tty->hw_stopped = 1; cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + + readb(base_addr + (CySRER << index)) & ~CyTxRdy); } } } - if (mdm_change & CyDSR) { +/* if (mdm_change & CyDSR) { } if (mdm_change & CyRI) { - } + }*/ } /* end of service */ cy_writeb(base_addr + (CyMIR << index), (save_xir & 0x3f)); @@ -1438,16 +1390,16 @@ txend: static irqreturn_t cyy_interrupt(int irq, void *dev_id) { int status; - struct cyclades_card *cinfo; + struct cyclades_card *cinfo = dev_id; void __iomem *base_addr, *card_base_addr; int chip; int index; int too_many; int had_work; - if ((cinfo = (struct cyclades_card *)dev_id) == 0) { + if (unlikely(cinfo == NULL)) { #ifdef CY_DEBUG_INTERRUPTS - printk("cyy_interrupt: spurious interrupt %d\n\r", irq); + printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",irq); #endif return IRQ_NONE; /* spurious interrupt */ } @@ -1455,6 +1407,10 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id) card_base_addr = cinfo->base_addr; index = cinfo->bus_index; + /* card was not initialized yet (e.g. DEBUG_SHIRQ) */ + if (unlikely(card_base_addr == NULL)) + return IRQ_HANDLED; + /* This loop checks all chips in the card. Make a note whenever _any_ chip had some work to do, as this is considered an indication that there will be more to do. Only when no chip @@ -1466,7 +1422,7 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id) base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); too_many = 0; - while ((status = cy_readb(base_addr + + while ((status = readb(base_addr + (CySVRR << index))) != 0x00) { had_work++; /* The purpose of the following test is to ensure that @@ -1498,7 +1454,7 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id) static int cyz_fetch_msg(struct cyclades_card *cinfo, - uclong * channel, ucchar * cmd, uclong * param) + __u32 * channel, __u8 * cmd, __u32 * param) { struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; @@ -1509,16 +1465,15 @@ cyz_fetch_msg(struct cyclades_card *cinfo, if (!ISZLOADED(*cinfo)) { return -1; } - zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & - 0xfffff); + zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; - loc_doorbell = cy_readl(&((struct RUNTIME_9060 __iomem *) + loc_doorbell = readl(&((struct RUNTIME_9060 __iomem *) (cinfo->ctl_addr))->loc_doorbell); if (loc_doorbell) { *cmd = (char)(0xff & loc_doorbell); - *channel = cy_readl(&board_ctrl->fwcmd_channel); - *param = (uclong) cy_readl(&board_ctrl->fwcmd_param); + *channel = readl(&board_ctrl->fwcmd_channel); + *param = (__u32) readl(&board_ctrl->fwcmd_param); cy_writel(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> loc_doorbell, 0xffffffff); return 1; @@ -1528,28 +1483,27 @@ cyz_fetch_msg(struct cyclades_card *cinfo, static int cyz_issue_cmd(struct cyclades_card *cinfo, - uclong channel, ucchar cmd, uclong param) + __u32 channel, __u8 cmd, __u32 param) { struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; struct BOARD_CTRL __iomem *board_ctrl; - unsigned long __iomem *pci_doorbell; + __u32 __iomem *pci_doorbell; int index; firm_id = cinfo->base_addr + ID_ADDRESS; if (!ISZLOADED(*cinfo)) { return -1; } - zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & - 0xfffff); + zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; index = 0; pci_doorbell = &((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))->pci_doorbell; - while ((cy_readl(pci_doorbell) & 0xff) != 0) { + while ((readl(pci_doorbell) & 0xff) != 0) { if (index++ == 1000) { - return (int)(cy_readl(pci_doorbell) & 0xff); + return (int)(readl(pci_doorbell) & 0xff); } udelay(50L); } @@ -1561,34 +1515,30 @@ cyz_issue_cmd(struct cyclades_card *cinfo, } /* cyz_issue_cmd */ static void -cyz_handle_rx(struct cyclades_port *info, - volatile struct CH_CTRL __iomem * ch_ctrl, - volatile struct BUF_CTRL __iomem * buf_ctrl) +cyz_handle_rx(struct cyclades_port *info, struct CH_CTRL __iomem *ch_ctrl, + struct BUF_CTRL __iomem *buf_ctrl) { - struct cyclades_card *cinfo = &cy_card[info->card]; + struct cyclades_card *cinfo = info->card; struct tty_struct *tty = info->tty; - volatile int char_count; + int char_count; int len; #ifdef BLOCKMOVE - int small_count; + unsigned char *buf; #else char data; #endif - volatile uclong rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; + __u32 rx_put, rx_get, new_rx_get, rx_bufsize, rx_bufaddr; - rx_get = new_rx_get = cy_readl(&buf_ctrl->rx_get); - rx_put = cy_readl(&buf_ctrl->rx_put); - rx_bufsize = cy_readl(&buf_ctrl->rx_bufsize); - rx_bufaddr = cy_readl(&buf_ctrl->rx_bufaddr); + rx_get = new_rx_get = readl(&buf_ctrl->rx_get); + rx_put = readl(&buf_ctrl->rx_put); + rx_bufsize = readl(&buf_ctrl->rx_bufsize); + rx_bufaddr = readl(&buf_ctrl->rx_bufaddr); if (rx_put >= rx_get) char_count = rx_put - rx_get; else char_count = rx_put - rx_get + rx_bufsize; if (char_count) { - info->last_active = jiffies; - info->jiffies[1] = jiffies; - #ifdef CY_ENABLE_MONITORING info->mon.int_count++; info->mon.char_count += char_count; @@ -1596,7 +1546,7 @@ cyz_handle_rx(struct cyclades_port *info, info->mon.char_max = char_count; info->mon.char_last = char_count; #endif - if (tty == 0) { + if (tty == NULL) { /* flush received characters */ new_rx_get = (new_rx_get + char_count) & (rx_bufsize - 1); @@ -1606,30 +1556,28 @@ cyz_handle_rx(struct cyclades_port *info, /* we'd like to use memcpy(t, f, n) and memset(s, c, count) for performance, but because of buffer boundaries, there may be several steps to the operation */ - while (0 < (small_count = min_t(unsigned int, - rx_bufsize - new_rx_get, - min_t(unsigned int, TTY_FLIPBUF_SIZE - - tty->flip.count, char_count)))){ - memcpy_fromio(tty->flip.char_buf_ptr, - (char *)(cinfo->base_addr + rx_bufaddr + - new_rx_get), - small_count); + while (1) { + len = tty_prepare_flip_string(tty, &buf, + char_count); + if (!len) + break; - tty->flip.char_buf_ptr += small_count; - memset(tty->flip.flag_buf_ptr, TTY_NORMAL, - small_count); - tty->flip.flag_buf_ptr += small_count; - new_rx_get = (new_rx_get + small_count) & + len = min_t(unsigned int, min(len, char_count), + rx_bufsize - new_rx_get); + + memcpy_fromio(buf, cinfo->base_addr + + rx_bufaddr + new_rx_get, len); + + new_rx_get = (new_rx_get + len) & (rx_bufsize - 1); - char_count -= small_count; - info->icount.rx += small_count; - info->idle_stats.recv_bytes += small_count; - tty->flip.count += small_count; + char_count -= len; + info->icount.rx += len; + info->idle_stats.recv_bytes += len; } #else len = tty_buffer_request_room(tty, char_count); while (len--) { - data = cy_readb(cinfo->base_addr + rx_bufaddr + + data = readb(cinfo->base_addr + rx_bufaddr + new_rx_get); new_rx_get = (new_rx_get + 1)& (rx_bufsize - 1); tty_insert_flip_char(tty, data, TTY_NORMAL); @@ -1640,13 +1588,12 @@ cyz_handle_rx(struct cyclades_port *info, #ifdef CONFIG_CYZ_INTR /* Recalculate the number of chars in the RX buffer and issue a cmd in case it's higher than the RX high water mark */ - rx_put = cy_readl(&buf_ctrl->rx_put); + rx_put = readl(&buf_ctrl->rx_put); if (rx_put >= rx_get) char_count = rx_put - rx_get; else char_count = rx_put - rx_get + rx_bufsize; - if (char_count >= (int)cy_readl(&buf_ctrl-> - rx_threshold)) { + if (char_count >= (int)readl(&buf_ctrl->rx_threshold)) { cy_sched_event(info, Cy_EVENT_Z_RX_FULL); } #endif @@ -1659,26 +1606,25 @@ cyz_handle_rx(struct cyclades_port *info, } static void -cyz_handle_tx(struct cyclades_port *info, - volatile struct CH_CTRL __iomem * ch_ctrl, - volatile struct BUF_CTRL __iomem * buf_ctrl) +cyz_handle_tx(struct cyclades_port *info, struct CH_CTRL __iomem *ch_ctrl, + struct BUF_CTRL __iomem *buf_ctrl) { - struct cyclades_card *cinfo = &cy_card[info->card]; + struct cyclades_card *cinfo = info->card; struct tty_struct *tty = info->tty; char data; - volatile int char_count; + int char_count; #ifdef BLOCKMOVE int small_count; #endif - volatile uclong tx_put, tx_get, tx_bufsize, tx_bufaddr; + __u32 tx_put, tx_get, tx_bufsize, tx_bufaddr; if (info->xmit_cnt <= 0) /* Nothing to transmit */ return; - tx_get = cy_readl(&buf_ctrl->tx_get); - tx_put = cy_readl(&buf_ctrl->tx_put); - tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize); - tx_bufaddr = cy_readl(&buf_ctrl->tx_bufaddr); + tx_get = readl(&buf_ctrl->tx_get); + tx_put = readl(&buf_ctrl->tx_put); + tx_bufsize = readl(&buf_ctrl->tx_bufsize); + tx_bufaddr = readl(&buf_ctrl->tx_bufaddr); if (tx_put >= tx_get) char_count = tx_get - tx_put - 1 + tx_bufsize; else @@ -1686,9 +1632,8 @@ cyz_handle_tx(struct cyclades_port *info, if (char_count) { - if (tty == 0) { + if (tty == NULL) goto ztxdone; - } if (info->x_char) { /* send special char */ data = info->x_char; @@ -1698,8 +1643,6 @@ cyz_handle_tx(struct cyclades_port *info, info->x_char = 0; char_count--; info->icount.tx++; - info->last_active = jiffies; - info->jiffies[2] = jiffies; } #ifdef BLOCKMOVE while (0 < (small_count = min_t(unsigned int, @@ -1719,8 +1662,6 @@ cyz_handle_tx(struct cyclades_port *info, info->xmit_cnt -= small_count; info->xmit_tail = (info->xmit_tail + small_count) & (SERIAL_XMIT_SIZE - 1); - info->last_active = jiffies; - info->jiffies[2] = jiffies; } #else while (info->xmit_cnt && char_count) { @@ -1733,8 +1674,6 @@ cyz_handle_tx(struct cyclades_port *info, tx_put = (tx_put + 1) & (tx_bufsize - 1); char_count--; info->icount.tx++; - info->last_active = jiffies; - info->jiffies[2] = jiffies; } #endif ztxdone: @@ -1750,33 +1689,32 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) { struct tty_struct *tty; struct cyclades_port *info; - static volatile struct FIRM_ID __iomem *firm_id; - static volatile struct ZFW_CTRL __iomem *zfw_ctrl; - static volatile struct BOARD_CTRL __iomem *board_ctrl; - static volatile struct CH_CTRL __iomem *ch_ctrl; - static volatile struct BUF_CTRL __iomem *buf_ctrl; - uclong channel; - ucchar cmd; - uclong param; - uclong hw_ver, fw_ver; + static struct FIRM_ID __iomem *firm_id; + static struct ZFW_CTRL __iomem *zfw_ctrl; + static struct BOARD_CTRL __iomem *board_ctrl; + static struct CH_CTRL __iomem *ch_ctrl; + static struct BUF_CTRL __iomem *buf_ctrl; + __u32 channel; + __u8 cmd; + __u32 param; + __u32 hw_ver, fw_ver; int special_count; int delta_count; firm_id = cinfo->base_addr + ID_ADDRESS; - zfw_ctrl = cinfo->base_addr + (cy_readl(&firm_id->zfwctrl_addr) & - 0xfffff); + zfw_ctrl = cinfo->base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; - fw_ver = cy_readl(&board_ctrl->fw_version); - hw_ver = cy_readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> + fw_ver = readl(&board_ctrl->fw_version); + hw_ver = readl(&((struct RUNTIME_9060 __iomem *)(cinfo->ctl_addr))-> mail_box_0); while (cyz_fetch_msg(cinfo, &channel, &cmd, ¶m) == 1) { special_count = 0; delta_count = 0; - info = &cy_port[channel + cinfo->first_line]; - if ((tty = info->tty) == 0) { + info = &cinfo->ports[channel]; + if ((tty = info->tty) == NULL) continue; - } + ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); @@ -1801,7 +1739,7 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) delta_count++; if (info->flags & ASYNC_CHECK_CD) { if ((fw_ver > 241 ? ((u_long) param) : - cy_readl(&ch_ctrl->rs_status)) & + readl(&ch_ctrl->rs_status)) & C_RS_DCD) { cy_sched_event(info, Cy_EVENT_OPEN_WAKEUP); @@ -1833,8 +1771,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) case C_CM_INTBACK2: /* Reception Interrupt */ #ifdef CY_DEBUG_INTERRUPTS - printk("cyz_interrupt: rcvd intr, card %d, " - "port %ld\n\r", info->card, channel); + printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, " + "port %ld\n", info->card, channel); #endif cyz_handle_rx(info, ch_ctrl, buf_ctrl); break; @@ -1843,8 +1781,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) case C_CM_INTBACK: /* Transmission Interrupt */ #ifdef CY_DEBUG_INTERRUPTS - printk("cyz_interrupt: xmit intr, card %d, " - "port %ld\n\r", info->card, channel); + printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, " + "port %ld\n", info->card, channel); #endif cyz_handle_tx(info, ch_ctrl, buf_ctrl); break; @@ -1865,18 +1803,19 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo) #ifdef CONFIG_CYZ_INTR static irqreturn_t cyz_interrupt(int irq, void *dev_id) { - struct cyclades_card *cinfo; + struct cyclades_card *cinfo = dev_id; - if ((cinfo = (struct cyclades_card *)dev_id) == 0) { + if (unlikely(cinfo == NULL)) { #ifdef CY_DEBUG_INTERRUPTS - printk("cyz_interrupt: spurious interrupt %d\n\r", irq); + printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",irq); #endif return IRQ_NONE; /* spurious interrupt */ } - if (!ISZLOADED(*cinfo)) { + if (unlikely(!ISZLOADED(*cinfo))) { #ifdef CY_DEBUG_INTERRUPTS - printk("cyz_interrupt: board not yet loaded (IRQ%d).\n\r", irq); + printk(KERN_DEBUG "cyz_interrupt: board not yet loaded " + "(IRQ%d).\n", irq); #endif return IRQ_NONE; } @@ -1890,19 +1829,18 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id) static void cyz_rx_restart(unsigned long arg) { struct cyclades_port *info = (struct cyclades_port *)arg; + struct cyclades_card *card = info->card; int retval; - int card = info->card; - uclong channel = (info->line) - (cy_card[card].first_line); + __u32 channel = info->line - card->first_line; unsigned long flags; - CY_LOCK(info, flags); - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK2, 0L); + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_INTBACK2, 0L); if (retval != 0) { - printk("cyc:cyz_rx_restart retval on ttyC%d was %x\n", + printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n", info->line, retval); } - cyz_rx_full_timer[info->line].function = NULL; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } #else /* CONFIG_CYZ_INTR */ @@ -1912,14 +1850,14 @@ static void cyz_poll(unsigned long arg) struct cyclades_card *cinfo; struct cyclades_port *info; struct tty_struct *tty; - static volatile struct FIRM_ID *firm_id; - static volatile struct ZFW_CTRL *zfw_ctrl; - static volatile struct BOARD_CTRL *board_ctrl; - static volatile struct CH_CTRL *ch_ctrl; - static volatile struct BUF_CTRL *buf_ctrl; + static struct FIRM_ID *firm_id; + static struct ZFW_CTRL *zfw_ctrl; + static struct BOARD_CTRL *board_ctrl; + static struct CH_CTRL *ch_ctrl; + static struct BUF_CTRL *buf_ctrl; + unsigned long expires = jiffies + HZ; int card, port; - cyz_timerlist.expires = jiffies + (HZ); for (card = 0; card < NR_CARDS; card++) { cinfo = &cy_card[card]; @@ -1930,12 +1868,12 @@ static void cyz_poll(unsigned long arg) firm_id = cinfo->base_addr + ID_ADDRESS; zfw_ctrl = cinfo->base_addr + - (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &(zfw_ctrl->board_ctrl); /* Skip first polling cycle to avoid racing conditions with the FW */ if (!cinfo->intr_enabled) { - cinfo->nports = (int)cy_readl(&board_ctrl->n_channel); + cinfo->nports = (int)readl(&board_ctrl->n_channel); cinfo->intr_enabled = 1; continue; } @@ -1943,7 +1881,7 @@ static void cyz_poll(unsigned long arg) cyz_handle_cmd(cinfo); for (port = 0; port < cinfo->nports; port++) { - info = &cy_port[port + cinfo->first_line]; + info = &cinfo->ports[port]; tty = info->tty; ch_ctrl = &(zfw_ctrl->ch_ctrl[port]); buf_ctrl = &(zfw_ctrl->buf_ctrl[port]); @@ -1953,9 +1891,9 @@ static void cyz_poll(unsigned long arg) cyz_handle_tx(info, ch_ctrl, buf_ctrl); } /* poll every 'cyz_polling_cycle' period */ - cyz_timerlist.expires = jiffies + cyz_polling_cycle; + expires = jiffies + cyz_polling_cycle; } - add_timer(&cyz_timerlist); + mod_timer(&cyz_timerlist, expires); } /* cyz_poll */ #endif /* CONFIG_CYZ_INTR */ @@ -1968,20 +1906,21 @@ static void cyz_poll(unsigned long arg) */ static int startup(struct cyclades_port *info) { + struct cyclades_card *card; unsigned long flags; int retval = 0; void __iomem *base_addr; - int card, chip, channel, index; + int chip, channel, index; unsigned long page; card = info->card; - channel = (info->line) - (cy_card[card].first_line); + channel = info->line - card->first_line; page = get_zeroed_page(GFP_KERNEL); if (!page) return -ENOMEM; - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); if (info->flags & ASYNC_INITIALIZED) { free_page(page); @@ -2001,24 +1940,22 @@ static int startup(struct cyclades_port *info) else info->xmit_buf = (unsigned char *)page; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); set_line_char(info); - if (!IS_CYC_Z(cy_card[card])) { + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + - (cy_chip_offset[chip] << index); + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); #ifdef CY_DEBUG_OPEN - printk("cyc startup card %d, chip %d, channel %d, " - "base_addr %lx\n", - card, chip, channel, (long)base_addr); - /**/ + printk(KERN_DEBUG "cyc startup card %d, chip %d, channel %d, " + "base_addr %p\n", + card, chip, channel, base_addr); #endif - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); @@ -2034,14 +1971,14 @@ static int startup(struct cyclades_port *info) cy_writeb(base_addr + (CyMSVR2 << index), CyDTR); #ifdef CY_DEBUG_DTR - printk("cyc:startup raising DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr + (CyMSVR1 << index)), - cy_readb(base_addr + (CyMSVR2 << index))); + printk(KERN_DEBUG "cyc:startup raising DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + readb(base_addr + (CyMSVR1 << index)), + readb(base_addr + (CyMSVR2 << index))); #endif cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + (CySRER << index)) | CyRxData); + readb(base_addr + (CySRER << index)) | CyRxData); info->flags |= ASYNC_INITIALIZED; if (info->tty) { @@ -2054,7 +1991,7 @@ static int startup(struct cyclades_port *info) info->idle_stats.recv_idle = info->idle_stats.xmit_idle = jiffies; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } else { struct FIRM_ID __iomem *firm_id; @@ -2063,24 +2000,23 @@ static int startup(struct cyclades_port *info) struct CH_CTRL __iomem *ch_ctrl; int retval; - base_addr = cy_card[card].base_addr; + base_addr = card->base_addr; firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(cy_card[card])) { + if (!ISZLOADED(*card)) { return -ENODEV; } - zfw_ctrl = cy_card[card].base_addr + - (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + zfw_ctrl = card->base_addr + + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = zfw_ctrl->ch_ctrl; #ifdef CY_DEBUG_OPEN - printk("cyc startup Z card %d, channel %d, base_addr %lx\n", - card, channel, (long)base_addr); - /**/ + printk(KERN_DEBUG "cyc startup Z card %d, channel %d, " + "base_addr %p\n", card, channel, base_addr); #endif - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writel(&ch_ctrl[channel].op_mode, C_CH_ENABLE); #ifdef Z_WAKE @@ -2102,33 +2038,31 @@ static int startup(struct cyclades_port *info) #endif /* CONFIG_CYZ_INTR */ #endif /* Z_WAKE */ - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L); + retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); if (retval != 0) { - printk("cyc:startup(1) retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was " + "%x\n", info->line, retval); } /* Flush RX buffers before raising DTR and RTS */ - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_RX, - 0L); + retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_RX, 0L); if (retval != 0) { - printk("cyc:startup(2) retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was " + "%x\n", info->line, retval); } /* set timeout !!! */ /* set RTS and DTR !!! */ cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel].rs_control) | C_RS_RTS | + readl(&ch_ctrl[channel].rs_control) | C_RS_RTS | C_RS_DTR); - retval = cyz_issue_cmd(&cy_card[info->card], channel, - C_CM_IOCTLM, 0L); + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); if (retval != 0) { - printk("cyc:startup(3) retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was " + "%x\n", info->line, retval); } #ifdef CY_DEBUG_DTR - printk("cyc:startup raising Z DTR\n"); + printk(KERN_DEBUG "cyc:startup raising Z DTR\n"); #endif /* enable send, recv, modem !!! */ @@ -2144,51 +2078,50 @@ static int startup(struct cyclades_port *info) info->idle_stats.recv_idle = info->idle_stats.xmit_idle = jiffies; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } #ifdef CY_DEBUG_OPEN - printk(" cyc startup done\n"); + printk(KERN_DEBUG "cyc startup done\n"); #endif return 0; errout: - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); return retval; } /* startup */ static void start_xmit(struct cyclades_port *info) { + struct cyclades_card *card; unsigned long flags; void __iomem *base_addr; - int card, chip, channel, index; + int chip, channel, index; card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { + channel = info->line - card->first_line; + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + - (cy_chip_offset[chip] << index); + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), channel); cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + (CySRER << index)) | CyTxRdy); - CY_UNLOCK(info, flags); + readb(base_addr + (CySRER << index)) | CyTxRdy); + spin_unlock_irqrestore(&card->card_lock, flags); } else { #ifdef CONFIG_CYZ_INTR int retval; - CY_LOCK(info, flags); - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK, - 0L); + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_INTBACK, 0L); if (retval != 0) { - printk("cyc:start_xmit retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was " + "%x\n", info->line, retval); } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); #else /* CONFIG_CYZ_INTR */ /* Don't have to do anything at this time */ #endif /* CONFIG_CYZ_INTR */ @@ -2201,30 +2134,30 @@ static void start_xmit(struct cyclades_port *info) */ static void shutdown(struct cyclades_port *info) { + struct cyclades_card *card; unsigned long flags; void __iomem *base_addr; - int card, chip, channel, index; + int chip, channel, index; if (!(info->flags & ASYNC_INITIALIZED)) { return; } card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { + channel = info->line - card->first_line; + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + - (cy_chip_offset[chip] << index); + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); #ifdef CY_DEBUG_OPEN - printk("cyc shutdown Y card %d, chip %d, channel %d, " - "base_addr %lx\n", - card, chip, channel, (long)base_addr); + printk(KERN_DEBUG "cyc shutdown Y card %d, chip %d, " + "channel %d, base_addr %p\n", + card, chip, channel, base_addr); #endif - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); /* Clear delta_msr_wait queue to avoid mem leaks. */ wake_up_interruptible(&info->delta_msr_wait); @@ -2240,10 +2173,10 @@ static void shutdown(struct cyclades_port *info) cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS); cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR); #ifdef CY_DEBUG_DTR - printk("cyc shutdown dropping DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr + (CyMSVR1 << index)), - cy_readb(base_addr + (CyMSVR2 << index))); + printk(KERN_DEBUG "cyc shutdown dropping DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + readb(base_addr + (CyMSVR1 << index)), + readb(base_addr + (CyMSVR2 << index))); #endif } cyy_issue_cmd(base_addr, CyCHAN_CTL | CyDIS_RCVR, index); @@ -2254,7 +2187,7 @@ static void shutdown(struct cyclades_port *info) set_bit(TTY_IO_ERROR, &info->tty->flags); } info->flags &= ~ASYNC_INITIALIZED; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } else { struct FIRM_ID __iomem *firm_id; struct ZFW_CTRL __iomem *zfw_ctrl; @@ -2262,23 +2195,23 @@ static void shutdown(struct cyclades_port *info) struct CH_CTRL __iomem *ch_ctrl; int retval; - base_addr = cy_card[card].base_addr; + base_addr = card->base_addr; #ifdef CY_DEBUG_OPEN - printk("cyc shutdown Z card %d, channel %d, base_addr %lx\n", - card, channel, (long)base_addr); + printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, " + "base_addr %p\n", card, channel, base_addr); #endif firm_id = base_addr + ID_ADDRESS; - if (!ISZLOADED(cy_card[card])) { + if (!ISZLOADED(*card)) { return; } - zfw_ctrl = cy_card[card].base_addr + - (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + zfw_ctrl = card->base_addr + + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = zfw_ctrl->ch_ctrl; - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); if (info->xmit_buf) { unsigned char *temp; @@ -2289,16 +2222,16 @@ static void shutdown(struct cyclades_port *info) if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { cy_writel(&ch_ctrl[channel].rs_control, - (uclong)(cy_readl(&ch_ctrl[channel].rs_control)& + (__u32)(readl(&ch_ctrl[channel].rs_control) & ~(C_RS_RTS | C_RS_DTR))); - retval = cyz_issue_cmd(&cy_card[info->card], channel, + retval = cyz_issue_cmd(info->card, channel, C_CM_IOCTLM, 0L); if (retval != 0) { - printk("cyc:shutdown retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_ERR"cyc:shutdown retval on ttyC%d " + "was %x\n", info->line, retval); } #ifdef CY_DEBUG_DTR - printk("cyc:shutdown dropping Z DTR\n"); + printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n"); #endif } @@ -2307,11 +2240,11 @@ static void shutdown(struct cyclades_port *info) } info->flags &= ~ASYNC_INITIALIZED; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } #ifdef CY_DEBUG_OPEN - printk(" cyc shutdown done\n"); + printk(KERN_DEBUG "cyc shutdown done\n"); #endif } /* shutdown */ @@ -2332,7 +2265,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, int retval; void __iomem *base_addr; - cinfo = &cy_card[info->card]; + cinfo = info->card; channel = info->line - cinfo->first_line; /* @@ -2340,9 +2273,8 @@ block_til_ready(struct tty_struct *tty, struct file *filp, * until it's done, and then try again. */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&info->close_wait); - } + wait_event_interruptible(info->close_wait, + !(info->flags & ASYNC_CLOSING)); return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; } @@ -2365,17 +2297,16 @@ block_til_ready(struct tty_struct *tty, struct file *filp, retval = 0; add_wait_queue(&info->open_wait, &wait); #ifdef CY_DEBUG_OPEN - printk("cyc block_til_ready before block: ttyC%d, count = %d\n", - info->line, info->count); - /**/ + printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, " + "count = %d\n", info->line, info->count); #endif - CY_LOCK(info, flags); + spin_lock_irqsave(&cinfo->card_lock, flags); if (!tty_hung_up_p(filp)) info->count--; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&cinfo->card_lock, flags); #ifdef CY_DEBUG_COUNT - printk("cyc block_til_ready: (%d): decrementing count to %d\n", - current->pid, info->count); + printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to " + "%d\n", current->pid, info->count); #endif info->blocked_open++; @@ -2386,7 +2317,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); while (1) { - CY_LOCK(info, flags); + spin_lock_irqsave(&cinfo->card_lock, flags); if ((tty->termios->c_cflag & CBAUD)) { cy_writeb(base_addr + (CyCAR << index), (u_char) channel); @@ -2395,15 +2326,14 @@ block_til_ready(struct tty_struct *tty, struct file *filp, cy_writeb(base_addr + (CyMSVR2 << index), CyDTR); #ifdef CY_DEBUG_DTR - printk("cyc:block_til_ready raising DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr + - (CyMSVR1 << index)), - cy_readb(base_addr + - (CyMSVR2 << index))); + printk(KERN_DEBUG "cyc:block_til_ready raising " + "DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + readb(base_addr + (CyMSVR1 << index)), + readb(base_addr + (CyMSVR2 << index))); #endif } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&cinfo->card_lock, flags); set_current_state(TASK_INTERRUPTIBLE); if (tty_hung_up_p(filp) || @@ -2413,26 +2343,25 @@ block_til_ready(struct tty_struct *tty, struct file *filp, break; } - CY_LOCK(info, flags); + spin_lock_irqsave(&cinfo->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || - (cy_readb(base_addr + + (readb(base_addr + (CyMSVR1 << index)) & CyDCD))) { - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&cinfo->card_lock, flags); break; } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&cinfo->card_lock, flags); if (signal_pending(current)) { retval = -ERESTARTSYS; break; } #ifdef CY_DEBUG_OPEN - printk("cyc block_til_ready blocking: ttyC%d, " - "count = %d\n", - info->line, info->count); - /**/ + printk(KERN_DEBUG "cyc block_til_ready blocking: " + "ttyC%d, count = %d\n", + info->line, info->count); #endif schedule(); } @@ -2446,31 +2375,30 @@ block_til_ready(struct tty_struct *tty, struct file *filp, base_addr = cinfo->base_addr; firm_id = base_addr + ID_ADDRESS; if (!ISZLOADED(*cinfo)) { - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); return -EINVAL; } - zfw_ctrl = base_addr + (cy_readl(&firm_id->zfwctrl_addr) & - 0xfffff); + zfw_ctrl = base_addr + (readl(&firm_id->zfwctrl_addr)& 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = zfw_ctrl->ch_ctrl; while (1) { if ((tty->termios->c_cflag & CBAUD)) { cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel]. - rs_control) | (C_RS_RTS | - C_RS_DTR)); - retval = cyz_issue_cmd(&cy_card[info->card], - channel, C_CM_IOCTLM, 0L); + readl(&ch_ctrl[channel].rs_control) | + C_RS_RTS | C_RS_DTR); + retval = cyz_issue_cmd(cinfo, + channel, C_CM_IOCTLM, 0L); if (retval != 0) { - printk("cyc:block_til_ready retval on " - "ttyC%d was %x\n", + printk(KERN_ERR "cyc:block_til_ready " + "retval on ttyC%d was %x\n", info->line, retval); } #ifdef CY_DEBUG_DTR - printk("cyc:block_til_ready raising Z DTR\n"); + printk(KERN_DEBUG "cyc:block_til_ready raising " + "Z DTR\n"); #endif } @@ -2482,7 +2410,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, break; } if (!(info->flags & ASYNC_CLOSING) && (C_CLOCAL(tty) || - (cy_readl(&ch_ctrl[channel].rs_status) & + (readl(&ch_ctrl[channel].rs_status) & C_RS_DCD))) { break; } @@ -2491,28 +2419,26 @@ block_til_ready(struct tty_struct *tty, struct file *filp, break; } #ifdef CY_DEBUG_OPEN - printk("cyc block_til_ready blocking: ttyC%d, " - "count = %d\n", - info->line, info->count); - /**/ + printk(KERN_DEBUG "cyc block_til_ready blocking: " + "ttyC%d, count = %d\n", + info->line, info->count); #endif schedule(); } } - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); if (!tty_hung_up_p(filp)) { info->count++; #ifdef CY_DEBUG_COUNT - printk("cyc:block_til_ready (%d): incrementing count to %d\n", - current->pid, info->count); + printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing " + "count to %d\n", current->pid, info->count); #endif } info->blocked_open--; #ifdef CY_DEBUG_OPEN - printk("cyc:block_til_ready after blocking: ttyC%d, count = %d\n", - info->line, info->count); - /**/ + printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, " + "count = %d\n", info->line, info->count); #endif if (retval) return retval; @@ -2527,13 +2453,20 @@ block_til_ready(struct tty_struct *tty, struct file *filp, static int cy_open(struct tty_struct *tty, struct file *filp) { struct cyclades_port *info; + unsigned int i; int retval, line; line = tty->index; if ((line < 0) || (NR_PORTS <= line)) { return -ENODEV; } - info = &cy_port[line]; + for (i = 0; i < NR_CARDS; i++) + if (line < cy_card[i].first_line + cy_card[i].nports && + line >= cy_card[i].first_line) + break; + if (i >= NR_CARDS) + return -ENODEV; + info = &cy_card[i].ports[line - cy_card[i].first_line]; if (info->line < 0) { return -ENODEV; } @@ -2542,23 +2475,23 @@ static int cy_open(struct tty_struct *tty, struct file *filp) treat it as absent from the system. This will make the user pay attention. */ - if (IS_CYC_Z(cy_card[info->card])) { - struct cyclades_card *cinfo = &cy_card[info->card]; + if (IS_CYC_Z(*info->card)) { + struct cyclades_card *cinfo = info->card; struct FIRM_ID __iomem *firm_id = cinfo->base_addr + ID_ADDRESS; if (!ISZLOADED(*cinfo)) { - if (((ZE_V1 == cy_readl( - &((struct RUNTIME_9060 __iomem *) + if (((ZE_V1 == readl(&((struct RUNTIME_9060 __iomem *) (cinfo->ctl_addr))->mail_box_0)) && Z_FPGA_CHECK(*cinfo)) && - (ZFIRM_HLT == cy_readl( + (ZFIRM_HLT == readl( &firm_id->signature))) { - printk("cyc:Cyclades-Z Error: you need an " - "external power supply for this number " - "of ports.\n\rFirmware halted.\r\n"); + printk(KERN_ERR "cyc:Cyclades-Z Error: you " + "need an external power supply for " + "this number of ports.\nFirmware " + "halted.\n"); } else { - printk("cyc:Cyclades-Z firmware not yet " - "loaded\n"); + printk(KERN_ERR "cyc:Cyclades-Z firmware not " + "yet loaded\n"); } return -ENODEV; } @@ -2572,24 +2505,23 @@ static int cy_open(struct tty_struct *tty, struct file *filp) struct BOARD_CTRL __iomem *board_ctrl; zfw_ctrl = cinfo->base_addr + - (cy_readl(&firm_id->zfwctrl_addr) & - 0xfffff); + (readl(&firm_id->zfwctrl_addr) & + 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; /* Enable interrupts on the PLX chip */ cy_writew(cinfo->ctl_addr + 0x68, - cy_readw(cinfo->ctl_addr + - 0x68) | 0x0900); + readw(cinfo->ctl_addr + 0x68) | 0x0900); /* Enable interrupts on the FW */ retval = cyz_issue_cmd(cinfo, 0, C_CM_IRQ_ENBL, 0L); if (retval != 0) { - printk("cyc:IRQ enable retval was %x\n", - retval); + printk(KERN_ERR "cyc:IRQ enable retval " + "was %x\n", retval); } cinfo->nports = - (int)cy_readl(&board_ctrl->n_channel); + (int)readl(&board_ctrl->n_channel); cinfo->intr_enabled = 1; } } @@ -2599,7 +2531,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp) return -ENODEV; } #ifdef CY_DEBUG_OTHER - printk("cyc:cy_open ttyC%d\n", info->line); /* */ + printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line); #endif tty->driver_data = info; info->tty = tty; @@ -2607,12 +2539,12 @@ static int cy_open(struct tty_struct *tty, struct file *filp) return -ENODEV; } #ifdef CY_DEBUG_OPEN - printk("cyc:cy_open ttyC%d, count = %d\n", info->line, info->count); - /**/ + printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line, + info->count); #endif info->count++; #ifdef CY_DEBUG_COUNT - printk("cyc:cy_open (%d): incrementing count to %d\n", + printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n", current->pid, info->count); #endif @@ -2620,8 +2552,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp) * If the port is the middle of closing, bail out now */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - if (info->flags & ASYNC_CLOSING) - interruptible_sleep_on(&info->close_wait); + wait_event_interruptible(info->close_wait, + !(info->flags & ASYNC_CLOSING)); return (info->flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; } @@ -2636,8 +2568,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp) retval = block_til_ready(tty, filp, info); if (retval) { #ifdef CY_DEBUG_OPEN - printk("cyc:cy_open returning after block_til_ready with %d\n", - retval); + printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready " + "with %d\n", retval); #endif return retval; } @@ -2645,8 +2577,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp) info->throttle = 0; #ifdef CY_DEBUG_OPEN - printk(" cyc:cy_open done\n"); - /**/ + printk(KERN_DEBUG "cyc:cy_open done\n"); #endif return 0; } /* cy_open */ @@ -2656,9 +2587,10 @@ static int cy_open(struct tty_struct *tty, struct file *filp) */ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_card *card; + struct cyclades_port *info = tty->driver_data; void __iomem *base_addr; - int card, chip, channel, index; + int chip, channel, index; unsigned long orig_jiffies; int char_time; @@ -2697,20 +2629,19 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) if (!timeout || timeout > 2 * info->timeout) timeout = 2 * info->timeout; #ifdef CY_DEBUG_WAIT_UNTIL_SENT - printk("In cy_wait_until_sent(%d) check=%lu...", timeout, char_time); - printk("jiff=%lu...", jiffies); + printk(KERN_DEBUG "In cy_wait_until_sent(%d) check=%d, jiff=%lu...", + timeout, char_time, jiffies); #endif card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { + channel = (info->line) - (card->first_line); + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = - cy_card[card].base_addr + (cy_chip_offset[chip] << index); - while (cy_readb(base_addr + (CySRER << index)) & CyTxRdy) { + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); + while (readb(base_addr + (CySRER << index)) & CyTxRdy) { #ifdef CY_DEBUG_WAIT_UNTIL_SENT - printk("Not clean (jiff=%lu)...", jiffies); + printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies); #endif if (msleep_interruptible(jiffies_to_msecs(char_time))) break; @@ -2718,13 +2649,11 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) timeout)) break; } - } else { - /* Nothing to do! */ } /* Run one more char cycle */ msleep_interruptible(jiffies_to_msecs(char_time * 5)); #ifdef CY_DEBUG_WAIT_UNTIL_SENT - printk("Clean (jiff=%lu)...done\n", jiffies); + printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies); #endif } @@ -2733,25 +2662,29 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout) */ static void cy_close(struct tty_struct *tty, struct file *filp) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; unsigned long flags; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_close ttyC%d\n", info->line); + printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line); #endif if (!info || serial_paranoia_check(info, tty->name, "cy_close")) { return; } - CY_LOCK(info, flags); + card = info->card; + + spin_lock_irqsave(&card->card_lock, flags); /* If the TTY is being hung up, nothing to do */ if (tty_hung_up_p(filp)) { - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); return; } #ifdef CY_DEBUG_OPEN - printk("cyc:cy_close ttyC%d, count = %d\n", info->line, info->count); + printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line, + info->count); #endif if ((tty->count == 1) && (info->count != 1)) { /* @@ -2761,22 +2694,22 @@ static void cy_close(struct tty_struct *tty, struct file *filp) * one, we've got real problems, since it means the * serial port won't be shutdown. */ - printk("cyc:cy_close: bad serial port count; tty->count is 1, " - "info->count is %d\n", info->count); + printk(KERN_ERR "cyc:cy_close: bad serial port count; " + "tty->count is 1, info->count is %d\n", info->count); info->count = 1; } #ifdef CY_DEBUG_COUNT - printk("cyc:cy_close at (%d): decrementing count to %d\n", + printk(KERN_DEBUG "cyc:cy_close at (%d): decrementing count to %d\n", current->pid, info->count - 1); #endif if (--info->count < 0) { #ifdef CY_DEBUG_COUNT - printk("cyc:cyc_close setting count to 0\n"); + printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n"); #endif info->count = 0; } if (info->count) { - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); return; } info->flags |= ASYNC_CLOSING; @@ -2786,81 +2719,80 @@ static void cy_close(struct tty_struct *tty, struct file *filp) * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); if (info->closing_wait != CY_CLOSING_WAIT_NONE) { tty_wait_until_sent(tty, info->closing_wait); } - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); - if (!IS_CYC_Z(cy_card[info->card])) { - int channel = info->line - cy_card[info->card].first_line; - int index = cy_card[info->card].bus_index; - void __iomem *base_addr = cy_card[info->card].base_addr + + if (!IS_CYC_Z(*card)) { + int channel = info->line - card->first_line; + int index = card->bus_index; + void __iomem *base_addr = card->base_addr + (cy_chip_offset[channel >> 2] << index); /* Stop accepting input */ channel &= 0x03; cy_writeb(base_addr + (CyCAR << index), (u_char) channel); cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + (CySRER << index)) & ~CyRxData); + readb(base_addr + (CySRER << index)) & ~CyRxData); if (info->flags & ASYNC_INITIALIZED) { /* Waiting for on-board buffers to be empty before closing the port */ - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); cy_wait_until_sent(tty, info->timeout); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); } } else { #ifdef Z_WAKE /* Waiting for on-board buffers to be empty before closing the port */ - void __iomem *base_addr = cy_card[info->card].base_addr; + void __iomem *base_addr = card->base_addr; struct FIRM_ID __iomem *firm_id = base_addr + ID_ADDRESS; struct ZFW_CTRL __iomem *zfw_ctrl = - base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + base_addr + (readl(&firm_id->zfwctrl_addr) & 0xfffff); struct CH_CTRL __iomem *ch_ctrl = zfw_ctrl->ch_ctrl; - int channel = info->line - cy_card[info->card].first_line; + int channel = info->line - card->first_line; int retval; - if (cy_readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) { - retval = cyz_issue_cmd(&cy_card[info->card], channel, - C_CM_IOCTLW, 0L); + if (readl(&ch_ctrl[channel].flow_status) != C_FS_TXIDLE) { + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLW, 0L); if (retval != 0) { - printk("cyc:cy_close retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_DEBUG "cyc:cy_close retval on " + "ttyC%d was %x\n", info->line, retval); } - CY_UNLOCK(info, flags); - interruptible_sleep_on(&info->shutdown_wait); - CY_LOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); + wait_for_completion_interruptible(&info->shutdown_wait); + spin_lock_irqsave(&card->card_lock, flags); } #endif } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); shutdown(info); if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty); tty_ldisc_flush(tty); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); tty->closing = 0; info->event = 0; info->tty = NULL; if (info->blocked_open) { - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); if (info->close_delay) { msleep_interruptible(jiffies_to_msecs (info->close_delay)); } wake_up_interruptible(&info->open_wait); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); } info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); wake_up_interruptible(&info->close_wait); #ifdef CY_DEBUG_OTHER - printk(" cyc:cy_close done\n"); + printk(KERN_DEBUG "cyc:cy_close done\n"); #endif - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } /* cy_close */ /* This routine gets called when tty_write has put something into @@ -2878,12 +2810,12 @@ static void cy_close(struct tty_struct *tty, struct file *filp) */ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; int c, ret = 0; #ifdef CY_DEBUG_IO - printk("cyc:cy_write ttyC%d\n", info->line); /* */ + printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_write")) { @@ -2893,7 +2825,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) if (!info->xmit_buf) return 0; - CY_LOCK(info, flags); + spin_lock_irqsave(&info->card->card_lock, flags); while (1) { c = min(count, min((int)(SERIAL_XMIT_SIZE - info->xmit_cnt - 1), (int)(SERIAL_XMIT_SIZE - info->xmit_head))); @@ -2909,7 +2841,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) count -= c; ret += c; } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&info->card->card_lock, flags); info->idle_stats.xmit_bytes += ret; info->idle_stats.xmit_idle = jiffies; @@ -2929,11 +2861,11 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count) */ static void cy_put_char(struct tty_struct *tty, unsigned char ch) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; unsigned long flags; #ifdef CY_DEBUG_IO - printk("cyc:cy_put_char ttyC%d\n", info->line); + printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_put_char")) @@ -2942,9 +2874,9 @@ static void cy_put_char(struct tty_struct *tty, unsigned char ch) if (!info->xmit_buf) return; - CY_LOCK(info, flags); + spin_lock_irqsave(&info->card->card_lock, flags); if (info->xmit_cnt >= (int)(SERIAL_XMIT_SIZE - 1)) { - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&info->card->card_lock, flags); return; } @@ -2953,7 +2885,7 @@ static void cy_put_char(struct tty_struct *tty, unsigned char ch) info->xmit_cnt++; info->idle_stats.xmit_bytes++; info->idle_stats.xmit_idle = jiffies; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&info->card->card_lock, flags); } /* cy_put_char */ /* @@ -2962,10 +2894,10 @@ static void cy_put_char(struct tty_struct *tty, unsigned char ch) */ static void cy_flush_chars(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef CY_DEBUG_IO - printk("cyc:cy_flush_chars ttyC%d\n", info->line); /* */ + printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_flush_chars")) @@ -2986,11 +2918,11 @@ static void cy_flush_chars(struct tty_struct *tty) */ static int cy_write_room(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; int ret; #ifdef CY_DEBUG_IO - printk("cyc:cy_write_room ttyC%d\n", info->line); /* */ + printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_write_room")) @@ -3003,46 +2935,49 @@ static int cy_write_room(struct tty_struct *tty) static int cy_chars_in_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - int card, channel; + struct cyclades_card *card; + struct cyclades_port *info = tty->driver_data; + int channel; if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer")) return 0; card = info->card; - channel = (info->line) - (cy_card[card].first_line); + channel = (info->line) - (card->first_line); #ifdef Z_EXT_CHARS_IN_BUFFER if (!IS_CYC_Z(cy_card[card])) { #endif /* Z_EXT_CHARS_IN_BUFFER */ #ifdef CY_DEBUG_IO - printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt); /* */ + printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", + info->line, info->xmit_cnt); #endif return info->xmit_cnt; #ifdef Z_EXT_CHARS_IN_BUFFER } else { - static volatile struct FIRM_ID *firm_id; - static volatile struct ZFW_CTRL *zfw_ctrl; - static volatile struct CH_CTRL *ch_ctrl; - static volatile struct BUF_CTRL *buf_ctrl; + static struct FIRM_ID *firm_id; + static struct ZFW_CTRL *zfw_ctrl; + static struct CH_CTRL *ch_ctrl; + static struct BUF_CTRL *buf_ctrl; int char_count; - volatile uclong tx_put, tx_get, tx_bufsize; + __u32 tx_put, tx_get, tx_bufsize; - firm_id = cy_card[card].base_addr + ID_ADDRESS; - zfw_ctrl = cy_card[card].base_addr + - (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + firm_id = card->base_addr + ID_ADDRESS; + zfw_ctrl = card->base_addr + + (readl(&firm_id->zfwctrl_addr) & 0xfffff); ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); buf_ctrl = &(zfw_ctrl->buf_ctrl[channel]); - tx_get = cy_readl(&buf_ctrl->tx_get); - tx_put = cy_readl(&buf_ctrl->tx_put); - tx_bufsize = cy_readl(&buf_ctrl->tx_bufsize); + tx_get = readl(&buf_ctrl->tx_get); + tx_put = readl(&buf_ctrl->tx_put); + tx_bufsize = readl(&buf_ctrl->tx_bufsize); if (tx_put >= tx_get) char_count = tx_put - tx_get; else char_count = tx_put - tx_get + tx_bufsize; #ifdef CY_DEBUG_IO - printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt + char_count); /* */ + printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n", + info->line, info->xmit_cnt + char_count); #endif return info->xmit_cnt + char_count; } @@ -3055,10 +2990,10 @@ static int cy_chars_in_buffer(struct tty_struct *tty) * ------------------------------------------------------------ */ -static void cyy_baud_calc(struct cyclades_port *info, uclong baud) +static void cyy_baud_calc(struct cyclades_port *info, __u32 baud) { int co, co_val, bpr; - uclong cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : + __u32 cy_clock = ((info->chip_rev >= CD1400_REV_J) ? 60000000 : 25000000); if (baud == 0) { @@ -3086,9 +3021,10 @@ static void cyy_baud_calc(struct cyclades_port *info, uclong baud) */ static void set_line_char(struct cyclades_port *info) { + struct cyclades_card *card; unsigned long flags; void __iomem *base_addr; - int card, chip, channel, index; + int chip, channel, index; unsigned cflag, iflag; unsigned short chip_number; int baud, baud_rate = 0; @@ -3118,12 +3054,12 @@ static void set_line_char(struct cyclades_port *info) } card = info->card; - channel = (info->line) - (cy_card[card].first_line); + channel = info->line - card->first_line; chip_number = channel / 4; - if (!IS_CYC_Z(cy_card[card])) { + if (!IS_CYC_Z(*card)) { - index = cy_card[card].bus_index; + index = card->bus_index; /* baud rate */ baud = tty_get_baud_rate(info->tty); @@ -3241,10 +3177,9 @@ static void set_line_char(struct cyclades_port *info) chip = channel >> 2; channel &= 0x03; - base_addr = cy_card[card].base_addr + - (cy_chip_offset[chip] << index); + base_addr = card->base_addr + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); /* tx and rx baud rate */ @@ -3276,8 +3211,7 @@ static void set_line_char(struct cyclades_port *info) if (C_CLOCAL(info->tty)) { /* without modem intr */ cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + - (CySRER << index)) | CyMdmCh); + readb(base_addr + (CySRER << index)) | CyMdmCh); /* act on 1->0 modem transitions */ if ((cflag & CRTSCTS) && info->rflow) { cy_writeb(base_addr + (CyMCOR1 << index), @@ -3291,7 +3225,7 @@ static void set_line_char(struct cyclades_port *info) } else { /* without modem intr */ cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + + readb(base_addr + (CySRER << index)) | CyMdmCh); /* act on 1->0 modem transitions */ if ((cflag & CRTSCTS) && info->rflow) { @@ -3316,10 +3250,10 @@ static void set_line_char(struct cyclades_port *info) ~CyDTR); } #ifdef CY_DEBUG_DTR - printk("cyc:set_line_char dropping DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr + (CyMSVR1 << index)), - cy_readb(base_addr + (CyMSVR2 << index))); + printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + readb(base_addr + (CyMSVR1 << index)), + readb(base_addr + (CyMSVR2 << index))); #endif } else { if (info->rtsdtr_inv) { @@ -3330,17 +3264,17 @@ static void set_line_char(struct cyclades_port *info) CyDTR); } #ifdef CY_DEBUG_DTR - printk("cyc:set_line_char raising DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr + (CyMSVR1 << index)), - cy_readb(base_addr + (CyMSVR2 << index))); + printk(KERN_DEBUG "cyc:set_line_char raising DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + readb(base_addr + (CyMSVR1 << index)), + readb(base_addr + (CyMSVR2 << index))); #endif } if (info->tty) { clear_bit(TTY_IO_ERROR, &info->tty->flags); } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } else { struct FIRM_ID __iomem *firm_id; @@ -3348,16 +3282,16 @@ static void set_line_char(struct cyclades_port *info) struct BOARD_CTRL __iomem *board_ctrl; struct CH_CTRL __iomem *ch_ctrl; struct BUF_CTRL __iomem *buf_ctrl; - uclong sw_flow; + __u32 sw_flow; int retval; - firm_id = cy_card[card].base_addr + ID_ADDRESS; - if (!ISZLOADED(cy_card[card])) { + firm_id = card->base_addr + ID_ADDRESS; + if (!ISZLOADED(*card)) { return; } - zfw_ctrl = cy_card[card].base_addr + - (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + zfw_ctrl = card->base_addr + + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = &(zfw_ctrl->ch_ctrl[channel]); buf_ctrl = &zfw_ctrl->buf_ctrl[channel]; @@ -3408,10 +3342,10 @@ static void set_line_char(struct cyclades_port *info) } if (cflag & CSTOPB) { cy_writel(&ch_ctrl->comm_data_l, - cy_readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); + readl(&ch_ctrl->comm_data_l) | C_DL_2STOP); } else { cy_writel(&ch_ctrl->comm_data_l, - cy_readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); + readl(&ch_ctrl->comm_data_l) | C_DL_1STOP); } if (cflag & PARENB) { if (cflag & PARODD) { @@ -3426,12 +3360,10 @@ static void set_line_char(struct cyclades_port *info) /* CTS flow control flag */ if (cflag & CRTSCTS) { cy_writel(&ch_ctrl->hw_flow, - cy_readl(&ch_ctrl-> - hw_flow) | C_RS_CTS | C_RS_RTS); + readl(&ch_ctrl->hw_flow) | C_RS_CTS | C_RS_RTS); } else { - cy_writel(&ch_ctrl->hw_flow, - cy_readl(&ch_ctrl-> - hw_flow) & ~(C_RS_CTS | C_RS_RTS)); + cy_writel(&ch_ctrl->hw_flow, readl(&ch_ctrl->hw_flow) & + ~(C_RS_CTS | C_RS_RTS)); } /* As the HW flow control is done in firmware, the driver doesn't need to care about it */ @@ -3446,10 +3378,10 @@ static void set_line_char(struct cyclades_port *info) } cy_writel(&ch_ctrl->sw_flow, sw_flow); - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L); + retval = cyz_issue_cmd(card, channel, C_CM_IOCTL, 0L); if (retval != 0) { - printk("cyc:set_line_char retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_ERR "cyc:set_line_char retval on ttyC%d " + "was %x\n", info->line, retval); } /* CD sensitivity */ @@ -3461,22 +3393,22 @@ static void set_line_char(struct cyclades_port *info) if (baud == 0) { /* baud rate is zero, turn off line */ cy_writel(&ch_ctrl->rs_control, - cy_readl(&ch_ctrl->rs_control) & ~C_RS_DTR); + readl(&ch_ctrl->rs_control) & ~C_RS_DTR); #ifdef CY_DEBUG_DTR - printk("cyc:set_line_char dropping Z DTR\n"); + printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n"); #endif } else { cy_writel(&ch_ctrl->rs_control, - cy_readl(&ch_ctrl->rs_control) | C_RS_DTR); + readl(&ch_ctrl->rs_control) | C_RS_DTR); #ifdef CY_DEBUG_DTR - printk("cyc:set_line_char raising Z DTR\n"); + printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n"); #endif } - retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTLM,0L); + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM,0L); if (retval != 0) { - printk("cyc:set_line_char(2) retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d " + "was %x\n", info->line, retval); } if (info->tty) { @@ -3490,14 +3422,15 @@ get_serial_info(struct cyclades_port *info, struct serial_struct __user * retinfo) { struct serial_struct tmp; - struct cyclades_card *cinfo = &cy_card[info->card]; + struct cyclades_card *cinfo = info->card; if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof(tmp)); tmp.type = info->type; tmp.line = info->line; - tmp.port = info->card * 0x100 + info->line - cinfo->first_line; + tmp.port = (info->card - cy_card) * 0x100 + info->line - + cinfo->first_line; tmp.irq = cinfo->irq; tmp.flags = info->flags; tmp.close_delay = info->close_delay; @@ -3566,25 +3499,25 @@ check_and_exit: */ static int get_lsr_info(struct cyclades_port *info, unsigned int __user * value) { - int card, chip, channel, index; + struct cyclades_card *card; + int chip, channel, index; unsigned char status; unsigned int result; unsigned long flags; void __iomem *base_addr; card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { + channel = (info->line) - (card->first_line); + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = - cy_card[card].base_addr + (cy_chip_offset[chip] << index); + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); - status = cy_readb(base_addr + (CySRER << index)) & + spin_lock_irqsave(&card->card_lock, flags); + status = readb(base_addr + (CySRER << index)) & (CyTxRdy | CyTxMpty); - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); result = (status ? 0 : TIOCSER_TEMT); } else { /* Not supported yet */ @@ -3595,8 +3528,9 @@ static int get_lsr_info(struct cyclades_port *info, unsigned int __user * value) static int cy_tiocmget(struct tty_struct *tty, struct file *file) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - int card, chip, channel, index; + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int chip, channel, index; void __iomem *base_addr; unsigned long flags; unsigned char status; @@ -3611,19 +3545,18 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) return -ENODEV; card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { + channel = info->line - card->first_line; + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = - cy_card[card].base_addr + (cy_chip_offset[chip] << index); + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); - status = cy_readb(base_addr + (CyMSVR1 << index)); - status |= cy_readb(base_addr + (CyMSVR2 << index)); - CY_UNLOCK(info, flags); + status = readb(base_addr + (CyMSVR1 << index)); + status |= readb(base_addr + (CyMSVR2 << index)); + spin_unlock_irqrestore(&card->card_lock, flags); if (info->rtsdtr_inv) { result = ((status & CyRTS) ? TIOCM_DTR : 0) | @@ -3637,19 +3570,14 @@ static int cy_tiocmget(struct tty_struct *tty, struct file *file) ((status & CyDSR) ? TIOCM_DSR : 0) | ((status & CyCTS) ? TIOCM_CTS : 0); } else { - base_addr = cy_card[card].base_addr; - - if (cy_card[card].num_chips != -1) { - return -EINVAL; - } - - firm_id = cy_card[card].base_addr + ID_ADDRESS; - if (ISZLOADED(cy_card[card])) { - zfw_ctrl = cy_card[card].base_addr + - (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + base_addr = card->base_addr; + firm_id = card->base_addr + ID_ADDRESS; + if (ISZLOADED(*card)) { + zfw_ctrl = card->base_addr + + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = zfw_ctrl->ch_ctrl; - lstatus = cy_readl(&ch_ctrl[channel].rs_status); + lstatus = readl(&ch_ctrl[channel].rs_status); result = ((lstatus & C_RS_RTS) ? TIOCM_RTS : 0) | ((lstatus & C_RS_DTR) ? TIOCM_DTR : 0) | ((lstatus & C_RS_DCD) ? TIOCM_CAR : 0) | @@ -3669,8 +3597,9 @@ static int cy_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - int card, chip, channel, index; + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int chip, channel, index; void __iomem *base_addr; unsigned long flags; struct FIRM_ID __iomem *firm_id; @@ -3683,16 +3612,15 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, return -ENODEV; card = info->card; - channel = (info->line) - (cy_card[card].first_line); - if (!IS_CYC_Z(cy_card[card])) { + channel = (info->line) - (card->first_line); + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = - cy_card[card].base_addr + (cy_chip_offset[chip] << index); + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); if (set & TIOCM_RTS) { - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); if (info->rtsdtr_inv) { @@ -3702,10 +3630,10 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, cy_writeb(base_addr + (CyMSVR1 << index), CyRTS); } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } if (clear & TIOCM_RTS) { - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); if (info->rtsdtr_inv) { @@ -3715,10 +3643,10 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS); } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } if (set & TIOCM_DTR) { - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); if (info->rtsdtr_inv) { @@ -3729,15 +3657,15 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, CyDTR); } #ifdef CY_DEBUG_DTR - printk("cyc:set_modem_info raising DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr + (CyMSVR1 << index)), - cy_readb(base_addr + (CyMSVR2 << index))); + printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + readb(base_addr + (CyMSVR1 << index)), + readb(base_addr + (CyMSVR2 << index))); #endif - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } if (clear & TIOCM_DTR) { - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); if (info->rtsdtr_inv) { @@ -3749,68 +3677,69 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, } #ifdef CY_DEBUG_DTR - printk("cyc:set_modem_info dropping DTR\n"); - printk(" status: 0x%x, 0x%x\n", - cy_readb(base_addr + (CyMSVR1 << index)), - cy_readb(base_addr + (CyMSVR2 << index))); + printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n"); + printk(KERN_DEBUG " status: 0x%x, 0x%x\n", + readb(base_addr + (CyMSVR1 << index)), + readb(base_addr + (CyMSVR2 << index))); #endif - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } } else { - base_addr = cy_card[card].base_addr; + base_addr = card->base_addr; - firm_id = cy_card[card].base_addr + ID_ADDRESS; - if (ISZLOADED(cy_card[card])) { - zfw_ctrl = cy_card[card].base_addr + - (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff); + firm_id = card->base_addr + ID_ADDRESS; + if (ISZLOADED(*card)) { + zfw_ctrl = card->base_addr + + (readl(&firm_id->zfwctrl_addr) & 0xfffff); board_ctrl = &zfw_ctrl->board_ctrl; ch_ctrl = zfw_ctrl->ch_ctrl; if (set & TIOCM_RTS) { - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel]. - rs_control) | C_RS_RTS); - CY_UNLOCK(info, flags); + readl(&ch_ctrl[channel].rs_control) | + C_RS_RTS); + spin_unlock_irqrestore(&card->card_lock, flags); } if (clear & TIOCM_RTS) { - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel]. - rs_control) & ~C_RS_RTS); - CY_UNLOCK(info, flags); + readl(&ch_ctrl[channel].rs_control) & + ~C_RS_RTS); + spin_unlock_irqrestore(&card->card_lock, flags); } if (set & TIOCM_DTR) { - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel]. - rs_control) | C_RS_DTR); + readl(&ch_ctrl[channel].rs_control) | + C_RS_DTR); #ifdef CY_DEBUG_DTR - printk("cyc:set_modem_info raising Z DTR\n"); + printk(KERN_DEBUG "cyc:set_modem_info raising " + "Z DTR\n"); #endif - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } if (clear & TIOCM_DTR) { - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writel(&ch_ctrl[channel].rs_control, - cy_readl(&ch_ctrl[channel]. - rs_control) & ~C_RS_DTR); + readl(&ch_ctrl[channel].rs_control) & + ~C_RS_DTR); #ifdef CY_DEBUG_DTR - printk("cyc:set_modem_info clearing Z DTR\n"); + printk(KERN_DEBUG "cyc:set_modem_info clearing " + "Z DTR\n"); #endif - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } } else { return -ENODEV; } - CY_LOCK(info, flags); - retval = cyz_issue_cmd(&cy_card[info->card], - channel, C_CM_IOCTLM, 0L); + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_IOCTLM, 0L); if (retval != 0) { - printk("cyc:set_modem_info retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d " + "was %x\n", info->line, retval); } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } return 0; } /* cy_tiocmset */ @@ -3820,14 +3749,17 @@ cy_tiocmset(struct tty_struct *tty, struct file *file, */ static void cy_break(struct tty_struct *tty, int break_state) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; unsigned long flags; if (serial_paranoia_check(info, tty->name, "cy_break")) return; - CY_LOCK(info, flags); - if (!IS_CYC_Z(cy_card[info->card])) { + card = info->card; + + spin_lock_irqsave(&card->card_lock, flags); + if (!IS_CYC_Z(*card)) { /* Let the transmit ISR take care of this (since it requires stuffing characters into the output stream). */ @@ -3835,18 +3767,18 @@ static void cy_break(struct tty_struct *tty, int break_state) if (!info->breakon) { info->breakon = 1; if (!info->xmit_cnt) { - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); start_xmit(info); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); } } } else { if (!info->breakoff) { info->breakoff = 1; if (!info->xmit_cnt) { - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); start_xmit(info); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); } } } @@ -3854,24 +3786,25 @@ static void cy_break(struct tty_struct *tty, int break_state) int retval; if (break_state == -1) { - retval = cyz_issue_cmd(&cy_card[info->card], - info->line - cy_card[info->card].first_line, + retval = cyz_issue_cmd(card, + info->line - card->first_line, C_CM_SET_BREAK, 0L); if (retval != 0) { - printk("cyc:cy_break (set) retval on ttyC%d " - "was %x\n", info->line, retval); + printk(KERN_ERR "cyc:cy_break (set) retval on " + "ttyC%d was %x\n", info->line, retval); } } else { - retval = cyz_issue_cmd(&cy_card[info->card], - info->line - cy_card[info->card].first_line, + retval = cyz_issue_cmd(card, + info->line - card->first_line, C_CM_CLR_BREAK, 0L); if (retval != 0) { - printk("cyc:cy_break (clr) retval on ttyC%d " - "was %x\n", info->line, retval); + printk(KERN_DEBUG "cyc:cy_break (clr) retval " + "on ttyC%d was %x\n", info->line, + retval); } } } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } /* cy_break */ static int @@ -3889,28 +3822,27 @@ get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon) static int set_threshold(struct cyclades_port *info, unsigned long value) { + struct cyclades_card *card; void __iomem *base_addr; - int card, channel, chip, index; + int channel, chip, index; unsigned long flags; card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { + channel = info->line - card->first_line; + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; + index = card->bus_index; base_addr = - cy_card[card].base_addr + (cy_chip_offset[chip] << index); + card->base_addr + (cy_chip_offset[chip] << index); info->cor3 &= ~CyREC_FIFO; info->cor3 |= value & CyREC_FIFO; - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCOR3 << index), info->cor3); cyy_issue_cmd(base_addr, CyCOR_CHANGE | CyCOR3ch, index); - CY_UNLOCK(info, flags); - } else { - /* Nothing to do! */ + spin_unlock_irqrestore(&card->card_lock, flags); } return 0; } /* set_threshold */ @@ -3918,25 +3850,23 @@ static int set_threshold(struct cyclades_port *info, unsigned long value) static int get_threshold(struct cyclades_port *info, unsigned long __user * value) { + struct cyclades_card *card; void __iomem *base_addr; - int card, channel, chip, index; + int channel, chip, index; unsigned long tmp; card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { + channel = info->line - card->first_line; + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = - cy_card[card].base_addr + (cy_chip_offset[chip] << index); + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); - tmp = cy_readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO; + tmp = readb(base_addr + (CyCOR3 << index)) & CyREC_FIFO; return put_user(tmp, value); - } else { - /* Nothing to do! */ - return 0; } + return 0; } /* get_threshold */ static int @@ -3954,49 +3884,45 @@ get_default_threshold(struct cyclades_port *info, unsigned long __user * value) static int set_timeout(struct cyclades_port *info, unsigned long value) { + struct cyclades_card *card; void __iomem *base_addr; - int card, channel, chip, index; + int channel, chip, index; unsigned long flags; card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { + channel = info->line - card->first_line; + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = - cy_card[card].base_addr + (cy_chip_offset[chip] << index); + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyRTPR << index), value & 0xff); - CY_UNLOCK(info, flags); - } else { - /* Nothing to do! */ + spin_unlock_irqrestore(&card->card_lock, flags); } return 0; } /* set_timeout */ static int get_timeout(struct cyclades_port *info, unsigned long __user * value) { + struct cyclades_card *card; void __iomem *base_addr; - int card, channel, chip, index; + int channel, chip, index; unsigned long tmp; card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { + channel = info->line - card->first_line; + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = - cy_card[card].base_addr + (cy_chip_offset[chip] << index); + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); - tmp = cy_readb(base_addr + (CyRTPR << index)); + tmp = readb(base_addr + (CyRTPR << index)); return put_user(tmp, value); - } else { - /* Nothing to do! */ - return 0; } + return 0; } /* get_timeout */ static int set_default_timeout(struct cyclades_port *info, unsigned long value) @@ -4020,7 +3946,7 @@ static int cy_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; struct cyclades_icount cprev, cnow; /* kernel counter temps */ struct serial_icounter_struct __user *p_cuser; /* user space */ int ret_val = 0; @@ -4031,7 +3957,8 @@ cy_ioctl(struct tty_struct *tty, struct file *file, return -ENODEV; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", info->line, cmd, arg); /* */ + printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", + info->line, cmd, arg); #endif switch (cmd) { @@ -4076,14 +4003,6 @@ cy_ioctl(struct tty_struct *tty, struct file *file, case CYGETRTSDTR_INV: ret_val = info->rtsdtr_inv; break; - case CYGETCARDINFO: - if (copy_to_user(argp, &cy_card[info->card], - sizeof(struct cyclades_card))) { - ret_val = -EFAULT; - break; - } - ret_val = 0; - break; case CYGETCD1400VER: ret_val = info->chip_rev; break; @@ -4119,34 +4038,22 @@ cy_ioctl(struct tty_struct *tty, struct file *file, * Caller should use TIOCGICOUNT to see which one it was */ case TIOCMIWAIT: - CY_LOCK(info, flags); + spin_lock_irqsave(&info->card->card_lock, flags); /* note the counters on entry */ - cprev = info->icount; - CY_UNLOCK(info, flags); - while (1) { - interruptible_sleep_on(&info->delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) { - return -ERESTARTSYS; - } - - CY_LOCK(info, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->card->card_lock, flags); + ret_val = wait_event_interruptible(info->delta_msr_wait, ({ + cprev = cnow; + spin_lock_irqsave(&info->card->card_lock, flags); cnow = info->icount; /* atomic copy */ - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&info->card->card_lock, flags); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - return -EIO; /* no change => error */ - } - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ + ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)); + })); + break; /* * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) @@ -4155,9 +4062,9 @@ cy_ioctl(struct tty_struct *tty, struct file *file, * RI where only 0->1 is counted. */ case TIOCGICOUNT: - CY_LOCK(info, flags); + spin_lock_irqsave(&info->card->card_lock, flags); cnow = info->icount; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&info->card->card_lock, flags); p_cuser = argp; ret_val = put_user(cnow.cts, &p_cuser->cts); if (ret_val) @@ -4199,7 +4106,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file, } #ifdef CY_DEBUG_OTHER - printk(" cyc:cy_ioctl done\n"); + printk(KERN_DEBUG "cyc:cy_ioctl done\n"); #endif return ret_val; @@ -4213,10 +4120,10 @@ cy_ioctl(struct tty_struct *tty, struct file *file, */ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_set_termios ttyC%d\n", info->line); + printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line); #endif if (tty->termios->c_cflag == old_termios->c_cflag && @@ -4248,8 +4155,9 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios) */ static void cy_send_xchar(struct tty_struct *tty, char ch) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - int card, channel; + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int channel; if (serial_paranoia_check(info, tty->name, "cy_send_xchar")) return; @@ -4260,15 +4168,13 @@ static void cy_send_xchar(struct tty_struct *tty, char ch) cy_start(tty); card = info->card; - channel = info->line - cy_card[card].first_line; + channel = info->line - card->first_line; - if (IS_CYC_Z(cy_card[card])) { + if (IS_CYC_Z(*card)) { if (ch == STOP_CHAR(tty)) - cyz_issue_cmd(&cy_card[card], channel, C_CM_SENDXOFF, - 0L); + cyz_issue_cmd(card, channel, C_CM_SENDXOFF, 0L); else if (ch == START_CHAR(tty)) - cyz_issue_cmd(&cy_card[card], channel, C_CM_SENDXON, - 0L); + cyz_issue_cmd(card, channel, C_CM_SENDXON, 0L); } } @@ -4278,15 +4184,16 @@ static void cy_send_xchar(struct tty_struct *tty, char ch) */ static void cy_throttle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; unsigned long flags; void __iomem *base_addr; - int card, chip, channel, index; + int chip, channel, index; #ifdef CY_DEBUG_THROTTLE char buf[64]; - printk("cyc:throttle %s: %d....ttyC%d\n", tty_name(tty, buf), + printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf), tty->ldisc.chars_in_buffer(tty), info->line); #endif @@ -4297,22 +4204,22 @@ static void cy_throttle(struct tty_struct *tty) card = info->card; if (I_IXOFF(tty)) { - if (!IS_CYC_Z(cy_card[card])) + if (!IS_CYC_Z(*card)) cy_send_xchar(tty, STOP_CHAR(tty)); else info->throttle = 1; } if (tty->termios->c_cflag & CRTSCTS) { - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { + channel = info->line - card->first_line; + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); if (info->rtsdtr_inv) { @@ -4322,7 +4229,7 @@ static void cy_throttle(struct tty_struct *tty) cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS); } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } else { info->throttle = 1; } @@ -4336,16 +4243,17 @@ static void cy_throttle(struct tty_struct *tty) */ static void cy_unthrottle(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; unsigned long flags; void __iomem *base_addr; - int card, chip, channel, index; + int chip, channel, index; #ifdef CY_DEBUG_THROTTLE char buf[64]; - printk("cyc:unthrottle %s: %d....ttyC%d\n", tty_name(tty, buf), - tty->ldisc.chars_in_buffer(tty), info->line); + printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n", + tty_name(tty, buf), tty->ldisc.chars_in_buffer(tty),info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) { @@ -4361,15 +4269,15 @@ static void cy_unthrottle(struct tty_struct *tty) if (tty->termios->c_cflag & CRTSCTS) { card = info->card; - channel = info->line - cy_card[card].first_line; - if (!IS_CYC_Z(cy_card[card])) { + channel = info->line - card->first_line; + if (!IS_CYC_Z(*card)) { chip = channel >> 2; channel &= 0x03; - index = cy_card[card].bus_index; - base_addr = cy_card[card].base_addr + + index = card->bus_index; + base_addr = card->base_addr + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) channel); if (info->rtsdtr_inv) { @@ -4379,7 +4287,7 @@ static void cy_unthrottle(struct tty_struct *tty) cy_writeb(base_addr + (CyMSVR1 << index), CyRTS); } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } else { info->throttle = 0; } @@ -4392,102 +4300,96 @@ static void cy_unthrottle(struct tty_struct *tty) static void cy_stop(struct tty_struct *tty) { struct cyclades_card *cinfo; - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; void __iomem *base_addr; int chip, channel, index; unsigned long flags; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_stop ttyC%d\n", info->line); /* */ + printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_stop")) return; - cinfo = &cy_card[info->card]; + cinfo = info->card; channel = info->line - cinfo->first_line; if (!IS_CYC_Z(*cinfo)) { index = cinfo->bus_index; chip = channel >> 2; channel &= 0x03; - base_addr = cy_card[info->card].base_addr + - (cy_chip_offset[chip] << index); + base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); + spin_lock_irqsave(&cinfo->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char)(channel & 0x0003)); /* index channel */ cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + (CySRER << index)) & ~CyTxRdy); - CY_UNLOCK(info, flags); - } else { - /* Nothing to do! */ + readb(base_addr + (CySRER << index)) & ~CyTxRdy); + spin_unlock_irqrestore(&cinfo->card_lock, flags); } } /* cy_stop */ static void cy_start(struct tty_struct *tty) { struct cyclades_card *cinfo; - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; void __iomem *base_addr; int chip, channel, index; unsigned long flags; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_start ttyC%d\n", info->line); /* */ + printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_start")) return; - cinfo = &cy_card[info->card]; + cinfo = info->card; channel = info->line - cinfo->first_line; index = cinfo->bus_index; if (!IS_CYC_Z(*cinfo)) { chip = channel >> 2; channel &= 0x03; - base_addr = cy_card[info->card].base_addr + - (cy_chip_offset[chip] << index); + base_addr = cinfo->base_addr + (cy_chip_offset[chip] << index); - CY_LOCK(info, flags); + spin_lock_irqsave(&cinfo->card_lock, flags); cy_writeb(base_addr + (CyCAR << index), (u_char) (channel & 0x0003)); /* index channel */ cy_writeb(base_addr + (CySRER << index), - cy_readb(base_addr + (CySRER << index)) | CyTxRdy); - CY_UNLOCK(info, flags); - } else { - /* Nothing to do! */ + readb(base_addr + (CySRER << index)) | CyTxRdy); + spin_unlock_irqrestore(&cinfo->card_lock, flags); } } /* cy_start */ static void cy_flush_buffer(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; - int card, channel, retval; + struct cyclades_port *info = tty->driver_data; + struct cyclades_card *card; + int channel, retval; unsigned long flags; #ifdef CY_DEBUG_IO - printk("cyc:cy_flush_buffer ttyC%d\n", info->line); /* */ + printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_flush_buffer")) return; card = info->card; - channel = (info->line) - (cy_card[card].first_line); + channel = info->line - card->first_line; - CY_LOCK(info, flags); + spin_lock_irqsave(&card->card_lock, flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); - if (IS_CYC_Z(cy_card[card])) { /* If it is a Z card, flush the on-board + if (IS_CYC_Z(*card)) { /* If it is a Z card, flush the on-board buffers as well */ - CY_LOCK(info, flags); - retval = - cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_TX, 0L); + spin_lock_irqsave(&card->card_lock, flags); + retval = cyz_issue_cmd(card, channel, C_CM_FLUSH_TX, 0L); if (retval != 0) { - printk("cyc: flush_buffer retval on ttyC%d was %x\n", - info->line, retval); + printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d " + "was %x\n", info->line, retval); } - CY_UNLOCK(info, flags); + spin_unlock_irqrestore(&card->card_lock, flags); } tty_wakeup(tty); } /* cy_flush_buffer */ @@ -4497,10 +4399,10 @@ static void cy_flush_buffer(struct tty_struct *tty) */ static void cy_hangup(struct tty_struct *tty) { - struct cyclades_port *info = (struct cyclades_port *)tty->driver_data; + struct cyclades_port *info = tty->driver_data; #ifdef CY_DEBUG_OTHER - printk("cyc:cy_hangup ttyC%d\n", info->line); /* */ + printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_hangup")) @@ -4511,7 +4413,8 @@ static void cy_hangup(struct tty_struct *tty) info->event = 0; info->count = 0; #ifdef CY_DEBUG_COUNT - printk("cyc:cy_hangup (%d): setting count to 0\n", current->pid); + printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n", + current->pid); #endif info->tty = NULL; info->flags &= ~ASYNC_NORMAL_ACTIVE; @@ -4526,10 +4429,107 @@ static void cy_hangup(struct tty_struct *tty) * --------------------------------------------------------------------- */ +static int __devinit cy_init_card(struct cyclades_card *cinfo) +{ + struct cyclades_port *info; + u32 mailbox; + unsigned int nports; + unsigned short chip_number; + int index, port; + + spin_lock_init(&cinfo->card_lock); + + if (IS_CYC_Z(*cinfo)) { /* Cyclades-Z */ + mailbox = readl(&((struct RUNTIME_9060 __iomem *) + cinfo->ctl_addr)->mail_box_0); + nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; + cinfo->intr_enabled = 0; + cinfo->nports = 0; /* Will be correctly set later, after + Z FW is loaded */ + } else { + index = cinfo->bus_index; + nports = cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; + } + + cinfo->ports = kzalloc(sizeof(*cinfo->ports) * nports, GFP_KERNEL); + if (cinfo->ports == NULL) { + printk(KERN_ERR "Cyclades: cannot allocate ports\n"); + cinfo->nports = 0; + return -ENOMEM; + } + + for (port = cinfo->first_line; port < cinfo->first_line + nports; + port++) { + info = &cinfo->ports[port - cinfo->first_line]; + info->magic = CYCLADES_MAGIC; + info->card = cinfo; + info->line = port; + info->flags = STD_COM_FLAGS; + info->closing_wait = CLOSING_WAIT_DELAY; + info->close_delay = 5 * HZ / 10; + + INIT_WORK(&info->tqueue, do_softint); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_completion(&info->shutdown_wait); + init_waitqueue_head(&info->delta_msr_wait); + + if (IS_CYC_Z(*cinfo)) { + info->type = PORT_STARTECH; + if (mailbox == ZO_V1) + info->xmit_fifo_size = CYZ_FIFO_SIZE; + else + info->xmit_fifo_size = 4 * CYZ_FIFO_SIZE; +#ifdef CONFIG_CYZ_INTR + setup_timer(&cyz_rx_full_timer[port], + cyz_rx_restart, (unsigned long)info); +#endif + } else { + info->type = PORT_CIRRUS; + info->xmit_fifo_size = CyMAX_CHAR_FIFO; + info->cor1 = CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; + info->cor2 = CyETC; + info->cor3 = 0x08; /* _very_ small rcv threshold */ + + chip_number = (port - cinfo->first_line) / 4; + if ((info->chip_rev = readb(cinfo->base_addr + + (cy_chip_offset[chip_number] << + index) + (CyGFRCR << index))) >= + CD1400_REV_J) { + /* It is a CD1400 rev. J or later */ + info->tbpr = baud_bpr_60[13]; /* Tx BPR */ + info->tco = baud_co_60[13]; /* Tx CO */ + info->rbpr = baud_bpr_60[13]; /* Rx BPR */ + info->rco = baud_co_60[13]; /* Rx CO */ + info->rtsdtr_inv = 1; + } else { + info->tbpr = baud_bpr_25[13]; /* Tx BPR */ + info->tco = baud_co_25[13]; /* Tx CO */ + info->rbpr = baud_bpr_25[13]; /* Rx BPR */ + info->rco = baud_co_25[13]; /* Rx CO */ + info->rtsdtr_inv = 0; + } + info->read_status_mask = CyTIMEOUT | CySPECHAR | + CyBREAK | CyPARITY | CyFRAME | CyOVERRUN; + } + + } + +#ifndef CONFIG_CYZ_INTR + if (IS_CYC_Z(*cinfo) && !timer_pending(&cyz_timerlist)) { + mod_timer(&cyz_timerlist, jiffies + 1); +#ifdef CY_PCI_DEBUG + printk(KERN_DEBUG "Cyclades-Z polling initialized\n"); +#endif + } +#endif + return 0; +} + /* initialize chips on Cyclom-Y card -- return number of valid chips (which is number of ports/4) */ -static unsigned short __init -cyy_init_card(void __iomem * true_base_addr, int index) +static unsigned short __devinit cyy_init_card(void __iomem *true_base_addr, + int index) { unsigned int chip_number; void __iomem *base_addr; @@ -4544,7 +4544,7 @@ cyy_init_card(void __iomem * true_base_addr, int index) base_addr = true_base_addr + (cy_chip_offset[chip_number] << index); mdelay(1); - if (cy_readb(base_addr + (CyCCR << index)) != 0x00) { + if (readb(base_addr + (CyCCR << index)) != 0x00) { /************* printk(" chip #%d at %#6lx is never idle (CCR != 0)\n", chip_number, (unsigned long)base_addr); @@ -4561,7 +4561,7 @@ cyy_init_card(void __iomem * true_base_addr, int index) chip 4 GFRCR register appears at chip 0, there is no chip 4 and this must be a Cyclom-16Y, not a Cyclom-32Ye. */ - if (chip_number == 4 && cy_readb(true_base_addr + + if (chip_number == 4 && readb(true_base_addr + (cy_chip_offset[0] << index) + (CyGFRCR << index)) == 0) { return chip_number; @@ -4570,7 +4570,7 @@ cyy_init_card(void __iomem * true_base_addr, int index) cy_writeb(base_addr + (CyCCR << index), CyCHIP_RESET); mdelay(1); - if (cy_readb(base_addr + (CyGFRCR << index)) == 0x00) { + if (readb(base_addr + (CyGFRCR << index)) == 0x00) { /* printk(" chip #%d at %#6lx is not responding ", chip_number, (unsigned long)base_addr); @@ -4578,7 +4578,7 @@ cyy_init_card(void __iomem * true_base_addr, int index) */ return chip_number; } - if ((0xf0 & (cy_readb(base_addr + (CyGFRCR << index)))) != + if ((0xf0 & (readb(base_addr + (CyGFRCR << index)))) != 0x40) { /* printk(" chip #%d at %#6lx is not valid (GFRCR == " @@ -4589,7 +4589,7 @@ cyy_init_card(void __iomem * true_base_addr, int index) return chip_number; } cy_writeb(base_addr + (CyGCR << index), CyCH0_SERIAL); - if (cy_readb(base_addr + (CyGFRCR << index)) >= CD1400_REV_J) { + if (readb(base_addr + (CyGFRCR << index)) >= CD1400_REV_J) { /* It is a CD1400 rev. J or later */ /* Impossible to reach 5ms with this chip. Changed to 2ms instead (f = 500 Hz). */ @@ -4602,7 +4602,7 @@ cyy_init_card(void __iomem * true_base_addr, int index) /* printk(" chip #%d at %#6lx is rev 0x%2x\n", chip_number, (unsigned long)base_addr, - cy_readb(base_addr+(CyGFRCR<<index))); + readb(base_addr+(CyGFRCR<<index))); */ } return chip_number; @@ -4647,9 +4647,15 @@ static int __init cy_detect_isa(void) /* probe for CD1400... */ cy_isa_address = ioremap(isa_address, CyISA_Ywin); + if (cy_isa_address == NULL) { + printk(KERN_ERR "Cyclom-Y/ISA: can't remap base " + "address\n"); + continue; + } cy_isa_nchan = CyPORTS_PER_CHIP * cyy_init_card(cy_isa_address, 0); if (cy_isa_nchan == 0) { + iounmap(cy_isa_address); continue; } #ifdef MODULE @@ -4660,40 +4666,42 @@ static int __init cy_detect_isa(void) /* find out the board's irq by probing */ cy_isa_irq = detect_isa_irq(cy_isa_address); if (cy_isa_irq == 0) { - printk("Cyclom-Y/ISA found at 0x%lx ", + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the " + "IRQ could not be detected.\n", (unsigned long)cy_isa_address); - printk("but the IRQ could not be detected.\n"); + iounmap(cy_isa_address); continue; } if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) { - printk("Cyclom-Y/ISA found at 0x%lx ", + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " + "more channels are available. Change NR_PORTS " + "in cyclades.c and recompile kernel.\n", (unsigned long)cy_isa_address); - printk("but no more channels are available.\n"); - printk("Change NR_PORTS in cyclades.c and recompile " - "kernel.\n"); + iounmap(cy_isa_address); return nboard; } /* fill the next cy_card structure available */ for (j = 0; j < NR_CARDS; j++) { - if (cy_card[j].base_addr == 0) + if (cy_card[j].base_addr == NULL) break; } if (j == NR_CARDS) { /* no more cy_cards available */ - printk("Cyclom-Y/ISA found at 0x%lx ", + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no " + "more cards can be used. Change NR_CARDS in " + "cyclades.c and recompile kernel.\n", (unsigned long)cy_isa_address); - printk("but no more cards can be used .\n"); - printk("Change NR_CARDS in cyclades.c and recompile " - "kernel.\n"); + iounmap(cy_isa_address); return nboard; } /* allocate IRQ */ if (request_irq(cy_isa_irq, cyy_interrupt, IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) { - printk("Cyclom-Y/ISA found at 0x%lx ", - (unsigned long)cy_isa_address); - printk("but could not allocate IRQ#%d.\n", cy_isa_irq); + printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but " + "could not allocate IRQ#%d.\n", + (unsigned long)cy_isa_address, cy_isa_irq); + iounmap(cy_isa_address); return nboard; } @@ -4704,15 +4712,23 @@ static int __init cy_detect_isa(void) cy_card[j].bus_index = 0; cy_card[j].first_line = cy_next_channel; cy_card[j].num_chips = cy_isa_nchan / 4; + if (cy_init_card(&cy_card[j])) { + cy_card[j].base_addr = NULL; + free_irq(cy_isa_irq, &cy_card[j]); + iounmap(cy_isa_address); + continue; + } nboard++; - /* print message */ - printk("Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d, ", + printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: " + "%d channels starting from port %d\n", j + 1, (unsigned long)cy_isa_address, (unsigned long)(cy_isa_address + (CyISA_Ywin - 1)), - cy_isa_irq); - printk("%d channels starting from port %d.\n", - cy_isa_nchan, cy_next_channel); + cy_isa_irq, cy_isa_nchan, cy_next_channel); + + for (j = cy_next_channel; + j < cy_next_channel + cy_isa_nchan; j++) + tty_register_device(cy_serial_driver, j, NULL); cy_next_channel += cy_isa_nchan; } return nboard; @@ -4721,510 +4737,310 @@ static int __init cy_detect_isa(void) #endif /* CONFIG_ISA */ } /* cy_detect_isa */ -static void plx_init(void __iomem * addr, uclong initctl) +#ifdef CONFIG_PCI +static void __devinit plx_init(void __iomem * addr, __u32 initctl) { /* Reset PLX */ - cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x40000000); + cy_writel(addr + initctl, readl(addr + initctl) | 0x40000000); udelay(100L); - cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x40000000); + cy_writel(addr + initctl, readl(addr + initctl) & ~0x40000000); /* Reload Config. Registers from EEPROM */ - cy_writel(addr + initctl, cy_readl(addr + initctl) | 0x20000000); + cy_writel(addr + initctl, readl(addr + initctl) | 0x20000000); udelay(100L); - cy_writel(addr + initctl, cy_readl(addr + initctl) & ~0x20000000); + cy_writel(addr + initctl, readl(addr + initctl) & ~0x20000000); } -/* - * --------------------------------------------------------------------- - * cy_detect_pci() - Test PCI bus presence and Cyclom-Ye/PCI. - * sets global variables and return the number of PCI boards found. - * --------------------------------------------------------------------- - */ -static int __init cy_detect_pci(void) +static int __devinit cy_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { -#ifdef CONFIG_PCI - - struct pci_dev *pdev = NULL; - unsigned char cyy_rev_id; - unsigned char cy_pci_irq = 0; - uclong cy_pci_phys0, cy_pci_phys2; - void __iomem *cy_pci_addr0, *cy_pci_addr2; - unsigned short i, j, cy_pci_nchan, plx_ver; - unsigned short device_id, dev_index = 0; - uclong mailbox; - uclong ZeIndex = 0; - void __iomem *Ze_addr0[NR_CARDS], *Ze_addr2[NR_CARDS]; - uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS]; - unsigned char Ze_irq[NR_CARDS]; - struct pci_dev *Ze_pdev[NR_CARDS]; - - for (i = 0; i < NR_CARDS; i++) { - /* look for a Cyclades card by vendor and device id */ - while ((device_id = cy_pci_dev_id[dev_index].device) != 0) { - if ((pdev = pci_get_device(PCI_VENDOR_ID_CYCLADES, - device_id, pdev)) == NULL) { - dev_index++; /* try next device id */ - } else { - break; /* found a board */ - } - } - - if (device_id == 0) - break; - - if (pci_enable_device(pdev)) - continue; - - /* read PCI configuration area */ - cy_pci_irq = pdev->irq; - cy_pci_phys0 = pci_resource_start(pdev, 0); - cy_pci_phys2 = pci_resource_start(pdev, 2); - pci_read_config_byte(pdev, PCI_REVISION_ID, &cyy_rev_id); + void __iomem *addr0 = NULL, *addr2 = NULL; + char *card_name = NULL; + u32 mailbox; + unsigned int device_id, nchan = 0, card_no, i; + unsigned char plx_ver; + int retval, irq; + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "cannot enable device\n"); + goto err; + } - device_id &= ~PCI_DEVICE_ID_MASK; + /* read PCI configuration area */ + irq = pdev->irq; + device_id = pdev->device & ~PCI_DEVICE_ID_MASK; - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || - device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { -#ifdef CY_PCI_DEBUG - printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ", - pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", - cyy_rev_id, (int)cy_pci_irq); - printk("Cyclom-Y/PCI:found winaddr=0x%lx " - "ctladdr=0x%lx\n", - (ulong)cy_pci_phys2, (ulong)cy_pci_phys0); +#if defined(__alpha__) + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ + dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for low " + "addresses on Alpha systems.\n"); + retval = -EIO; + goto err_dis; + } #endif + if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { + dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for low " + "addresses\n"); + retval = -EIO; + goto err_dis; + } - if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { - printk(" Warning: PCI I/O bit incorrectly " - "set. Ignoring it...\n"); - pdev->resource[2].flags &= ~IORESOURCE_IO; - } + if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { + dev_warn(&pdev->dev, "PCI I/O bit incorrectly set. Ignoring " + "it...\n"); + pdev->resource[2].flags &= ~IORESOURCE_IO; + } - /* Although we don't use this I/O region, we should - request it from the kernel anyway, to avoid problems - with other drivers accessing it. */ - if (pci_request_regions(pdev, "Cyclom-Y") != 0) { - printk(KERN_ERR "cyclades: failed to reserve " - "PCI resources\n"); - continue; - } -#if defined(__alpha__) - if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */ - printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ", - pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", - cyy_rev_id, (int)cy_pci_irq); - printk("Cyclom-Y/PCI:found winaddr=0x%lx " - "ctladdr=0x%lx\n", - (ulong)cy_pci_phys2, - (ulong)cy_pci_phys0); - printk("Cyclom-Y/PCI not supported for low " - "addresses in Alpha systems.\n"); - i--; - continue; - } -#endif - cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Yctl); - cy_pci_addr2 = ioremap(cy_pci_phys2, CyPCI_Ywin); + retval = pci_request_regions(pdev, "cyclades"); + if (retval) { + dev_err(&pdev->dev, "failed to reserve resources\n"); + goto err_dis; + } -#ifdef CY_PCI_DEBUG - printk("Cyclom-Y/PCI: relocate winaddr=0x%lx " - "ctladdr=0x%lx\n", - (u_long)cy_pci_addr2, (u_long)cy_pci_addr0); -#endif - cy_pci_nchan = (unsigned short)(CyPORTS_PER_CHIP * - cyy_init_card(cy_pci_addr2, 1)); - if (cy_pci_nchan == 0) { - printk("Cyclom-Y PCI host card with "); - printk("no Serial-Modules at 0x%lx.\n", - (ulong) cy_pci_phys2); - i--; - continue; - } - if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) { - printk("Cyclom-Y/PCI found at 0x%lx ", - (ulong) cy_pci_phys2); - printk("but no channels are available.\n"); - printk("Change NR_PORTS in cyclades.c and " - "recompile kernel.\n"); - return i; - } - /* fill the next cy_card structure available */ - for (j = 0; j < NR_CARDS; j++) { - if (cy_card[j].base_addr == 0) - break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - printk("Cyclom-Y/PCI found at 0x%lx ", - (ulong) cy_pci_phys2); - printk("but no more cards can be used.\n"); - printk("Change NR_CARDS in cyclades.c and " - "recompile kernel.\n"); - return i; - } + retval = -EIO; + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + card_name = "Cyclom-Y"; - /* allocate IRQ */ - if (request_irq(cy_pci_irq, cyy_interrupt, - IRQF_SHARED, "Cyclom-Y", &cy_card[j])) { - printk("Cyclom-Y/PCI found at 0x%lx ", - (ulong) cy_pci_phys2); - printk("but could not allocate IRQ%d.\n", - cy_pci_irq); - return i; - } + addr0 = pci_iomap(pdev, 0, CyPCI_Yctl); + if (addr0 == NULL) { + dev_err(&pdev->dev, "can't remap ctl region\n"); + goto err_reg; + } + addr2 = pci_iomap(pdev, 2, CyPCI_Ywin); + if (addr2 == NULL) { + dev_err(&pdev->dev, "can't remap base region\n"); + goto err_unmap; + } - /* set cy_card */ - cy_card[j].base_phys = (ulong) cy_pci_phys2; - cy_card[j].ctl_phys = (ulong) cy_pci_phys0; - cy_card[j].base_addr = cy_pci_addr2; - cy_card[j].ctl_addr = cy_pci_addr0; - cy_card[j].irq = (int)cy_pci_irq; - cy_card[j].bus_index = 1; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = cy_pci_nchan / 4; - cy_card[j].pdev = pdev; - - /* enable interrupts in the PCI interface */ - plx_ver = cy_readb(cy_pci_addr2 + CyPLX_VER) & 0x0f; - switch (plx_ver) { - case PLX_9050: - - cy_writeb(cy_pci_addr0 + 0x4c, 0x43); - break; + nchan = CyPORTS_PER_CHIP * cyy_init_card(addr2, 1); + if (nchan == 0) { + dev_err(&pdev->dev, "Cyclom-Y PCI host card with no " + "Serial-Modules\n"); + return -EIO; + } + } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { + struct RUNTIME_9060 __iomem *ctl_addr; - case PLX_9060: - case PLX_9080: - default: /* Old boards, use PLX_9060 */ - - plx_init(cy_pci_addr0, 0x6c); - /* For some yet unknown reason, once the PLX9060 reloads - the EEPROM, the IRQ is lost and, thus, we have to - re-write it to the PCI config. registers. - This will remain here until we find a permanent - fix. */ - pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, - cy_pci_irq); - - cy_writew(cy_pci_addr0 + 0x68, - cy_readw(cy_pci_addr0 + - 0x68) | 0x0900); - break; - } + ctl_addr = addr0 = pci_iomap(pdev, 0, CyPCI_Zctl); + if (addr0 == NULL) { + dev_err(&pdev->dev, "can't remap ctl region\n"); + goto err_reg; + } - /* print message */ - printk("Cyclom-Y/PCI #%d: 0x%lx-0x%lx, IRQ%d, ", - j + 1, (ulong)cy_pci_phys2, - (ulong) (cy_pci_phys2 + CyPCI_Ywin - 1), - (int)cy_pci_irq); - printk("%d channels starting from port %d.\n", - cy_pci_nchan, cy_next_channel); - - cy_next_channel += cy_pci_nchan; - } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) { - /* print message */ - printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ", - pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", - cyy_rev_id, (int)cy_pci_irq); - printk("Cyclades-Z/PCI: found winaddr=0x%lx " - "ctladdr=0x%lx\n", - (ulong)cy_pci_phys2, (ulong)cy_pci_phys0); - printk("Cyclades-Z/PCI not supported for low " - "addresses\n"); - break; - } else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) { -#ifdef CY_PCI_DEBUG - printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ", - pdev->bus->number, pdev->devfn); - printk("rev_id=%d) IRQ%d\n", - cyy_rev_id, (int)cy_pci_irq); - printk("Cyclades-Z/PCI: found winaddr=0x%lx " - "ctladdr=0x%lx\n", - (ulong) cy_pci_phys2, (ulong) cy_pci_phys0); -#endif - cy_pci_addr0 = ioremap(cy_pci_phys0, CyPCI_Zctl); - - /* Disable interrupts on the PLX before resetting it */ - cy_writew(cy_pci_addr0 + 0x68, - cy_readw(cy_pci_addr0 + 0x68) & ~0x0900); - - plx_init(cy_pci_addr0, 0x6c); - /* For some yet unknown reason, once the PLX9060 reloads - the EEPROM, the IRQ is lost and, thus, we have to - re-write it to the PCI config. registers. - This will remain here until we find a permanent - fix. */ - pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, - cy_pci_irq); - - mailbox = - (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *) - cy_pci_addr0)->mail_box_0); - - if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { - printk(" Warning: PCI I/O bit incorrectly " - "set. Ignoring it...\n"); - pdev->resource[2].flags &= ~IORESOURCE_IO; - } + /* Disable interrupts on the PLX before resetting it */ + cy_writew(addr0 + 0x68, + readw(addr0 + 0x68) & ~0x0900); + + plx_init(addr0, 0x6c); + /* For some yet unknown reason, once the PLX9060 reloads + the EEPROM, the IRQ is lost and, thus, we have to + re-write it to the PCI config. registers. + This will remain here until we find a permanent + fix. */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); + + mailbox = (u32)readl(&ctl_addr->mail_box_0); + + addr2 = pci_iomap(pdev, 2, mailbox == ZE_V1 ? + CyPCI_Ze_win : CyPCI_Zwin); + if (addr2 == NULL) { + dev_err(&pdev->dev, "can't remap base region\n"); + goto err_unmap; + } - /* Although we don't use this I/O region, we should - request it from the kernel anyway, to avoid problems - with other drivers accessing it. */ - if (pci_request_regions(pdev, "Cyclades-Z") != 0) { - printk(KERN_ERR "cyclades: failed to reserve " - "PCI resources\n"); - continue; - } + if (mailbox == ZE_V1) { + card_name = "Cyclades-Ze"; - if (mailbox == ZE_V1) { - cy_pci_addr2 = ioremap(cy_pci_phys2, - CyPCI_Ze_win); - if (ZeIndex == NR_CARDS) { - printk("Cyclades-Ze/PCI found at " - "0x%lx but no more cards can " - "be used.\nChange NR_CARDS in " - "cyclades.c and recompile " - "kernel.\n", - (ulong)cy_pci_phys2); - } else { - Ze_phys0[ZeIndex] = cy_pci_phys0; - Ze_phys2[ZeIndex] = cy_pci_phys2; - Ze_addr0[ZeIndex] = cy_pci_addr0; - Ze_addr2[ZeIndex] = cy_pci_addr2; - Ze_irq[ZeIndex] = cy_pci_irq; - Ze_pdev[ZeIndex] = pdev; - ZeIndex++; - } - i--; - continue; - } else { - cy_pci_addr2 = ioremap(cy_pci_phys2,CyPCI_Zwin); - } + readl(&ctl_addr->mail_box_0); + nchan = ZE_V1_NPORTS; + } else { + card_name = "Cyclades-8Zo"; #ifdef CY_PCI_DEBUG - printk("Cyclades-Z/PCI: relocate winaddr=0x%lx " - "ctladdr=0x%lx\n", - (ulong) cy_pci_addr2, (ulong) cy_pci_addr0); if (mailbox == ZO_V1) { - cy_writel(&((struct RUNTIME_9060 *) - (cy_pci_addr0))->loc_addr_base, - WIN_CREG); - PAUSE; - printk("Cyclades-8Zo/PCI: FPGA id %lx, ver " - "%lx\n", (ulong) (0xff & - cy_readl(&((struct CUSTOM_REG *) - (cy_pci_addr2))->fpga_id)), - (ulong)(0xff & - cy_readl(&((struct CUSTOM_REG *) - (cy_pci_addr2))-> - fpga_version))); - cy_writel(&((struct RUNTIME_9060 *) - (cy_pci_addr0))->loc_addr_base, - WIN_RAM); + cy_writel(&ctl_addr->loc_addr_base, WIN_CREG); + dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA " + "id %lx, ver %lx\n", (ulong)(0xff & + readl(&((struct CUSTOM_REG *)addr2)-> + fpga_id)), (ulong)(0xff & + readl(&((struct CUSTOM_REG *)addr2)-> + fpga_version))); + cy_writel(&ctl_addr->loc_addr_base, WIN_RAM); } else { - printk("Cyclades-Z/PCI: New Cyclades-Z board. " - "FPGA not loaded\n"); + dev_info(&pdev->dev, "Cyclades-Z/PCI: New " + "Cyclades-Z board. FPGA not loaded\n"); } #endif /* The following clears the firmware id word. This ensures that the driver will not attempt to talk to the board until it has been properly initialized. */ - PAUSE; if ((mailbox == ZO_V1) || (mailbox == ZO_V2)) - cy_writel(cy_pci_addr2 + ID_ADDRESS, 0L); + cy_writel(addr2 + ID_ADDRESS, 0L); /* This must be a Cyclades-8Zo/PCI. The extendable version will have a different device_id and will be allocated its maximum number of ports. */ - cy_pci_nchan = 8; - - if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) { - printk("Cyclades-8Zo/PCI found at 0x%lx but" - "no channels are available.\nChange " - "NR_PORTS in cyclades.c and recompile " - "kernel.\n", (ulong)cy_pci_phys2); - return i; - } - - /* fill the next cy_card structure available */ - for (j = 0; j < NR_CARDS; j++) { - if (cy_card[j].base_addr == 0) - break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - printk("Cyclades-8Zo/PCI found at 0x%lx but" - "no more cards can be used.\nChange " - "NR_CARDS in cyclades.c and recompile " - "kernel.\n", (ulong)cy_pci_phys2); - return i; - } -#ifdef CONFIG_CYZ_INTR - /* allocate IRQ only if board has an IRQ */ - if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) { - if (request_irq(cy_pci_irq, cyz_interrupt, - IRQF_SHARED, "Cyclades-Z", - &cy_card[j])) { - printk("Cyclom-8Zo/PCI found at 0x%lx " - "but could not allocate " - "IRQ%d.\n", (ulong)cy_pci_phys2, - cy_pci_irq); - return i; - } - } -#endif /* CONFIG_CYZ_INTR */ - - /* set cy_card */ - cy_card[j].base_phys = cy_pci_phys2; - cy_card[j].ctl_phys = cy_pci_phys0; - cy_card[j].base_addr = cy_pci_addr2; - cy_card[j].ctl_addr = cy_pci_addr0; - cy_card[j].irq = (int)cy_pci_irq; - cy_card[j].bus_index = 1; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = -1; - cy_card[j].pdev = pdev; - - /* print message */ -#ifdef CONFIG_CYZ_INTR - /* don't report IRQ if board is no IRQ */ - if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) - printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, " - "IRQ%d, ", j + 1, (ulong)cy_pci_phys2, - (ulong) (cy_pci_phys2 + CyPCI_Zwin - 1), - (int)cy_pci_irq); - else -#endif /* CONFIG_CYZ_INTR */ - printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, ", - j + 1, (ulong)cy_pci_phys2, - (ulong)(cy_pci_phys2 + CyPCI_Zwin - 1)); - - printk("%d channels starting from port %d.\n", - cy_pci_nchan, cy_next_channel); - cy_next_channel += cy_pci_nchan; + nchan = 8; } } - for (; ZeIndex != 0 && i < NR_CARDS; i++) { - cy_pci_phys0 = Ze_phys0[0]; - cy_pci_phys2 = Ze_phys2[0]; - cy_pci_addr0 = Ze_addr0[0]; - cy_pci_addr2 = Ze_addr2[0]; - cy_pci_irq = Ze_irq[0]; - pdev = Ze_pdev[0]; - for (j = 0; j < ZeIndex - 1; j++) { - Ze_phys0[j] = Ze_phys0[j + 1]; - Ze_phys2[j] = Ze_phys2[j + 1]; - Ze_addr0[j] = Ze_addr0[j + 1]; - Ze_addr2[j] = Ze_addr2[j + 1]; - Ze_irq[j] = Ze_irq[j + 1]; - Ze_pdev[j] = Ze_pdev[j + 1]; - } - ZeIndex--; - mailbox = (uclong)cy_readl(&((struct RUNTIME_9060 __iomem *) - cy_pci_addr0)->mail_box_0); -#ifdef CY_PCI_DEBUG - printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n", - (ulong)cy_pci_addr2, (ulong)cy_pci_addr0); - printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not " - "loaded\n"); -#endif - PAUSE; - /* This must be the new Cyclades-Ze/PCI. */ - cy_pci_nchan = ZE_V1_NPORTS; - - if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) { - printk("Cyclades-Ze/PCI found at 0x%lx but no channels " - "are available.\nChange NR_PORTS in cyclades.c " - "and recompile kernel.\n", - (ulong) cy_pci_phys2); - return i; - } + if ((cy_next_channel + nchan) > NR_PORTS) { + dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " + "channels are available. Change NR_PORTS in " + "cyclades.c and recompile kernel.\n"); + goto err_unmap; + } + /* fill the next cy_card structure available */ + for (card_no = 0; card_no < NR_CARDS; card_no++) { + if (cy_card[card_no].base_addr == NULL) + break; + } + if (card_no == NR_CARDS) { /* no more cy_cards available */ + dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no " + "more cards can be used. Change NR_CARDS in " + "cyclades.c and recompile kernel.\n"); + goto err_unmap; + } - /* fill the next cy_card structure available */ - for (j = 0; j < NR_CARDS; j++) { - if (cy_card[j].base_addr == 0) - break; - } - if (j == NR_CARDS) { /* no more cy_cards available */ - printk("Cyclades-Ze/PCI found at 0x%lx but no more " - "cards can be used.\nChange NR_CARDS in " - "cyclades.c and recompile kernel.\n", - (ulong) cy_pci_phys2); - return i; + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + /* allocate IRQ */ + retval = request_irq(irq, cyy_interrupt, + IRQF_SHARED, "Cyclom-Y", &cy_card[card_no]); + if (retval) { + dev_err(&pdev->dev, "could not allocate IRQ\n"); + goto err_unmap; } + cy_card[card_no].num_chips = nchan / 4; + } else { #ifdef CONFIG_CYZ_INTR /* allocate IRQ only if board has an IRQ */ - if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) { - if (request_irq(cy_pci_irq, cyz_interrupt, + if (irq != 0 && irq != 255) { + retval = request_irq(irq, cyz_interrupt, IRQF_SHARED, "Cyclades-Z", - &cy_card[j])) { - printk("Cyclom-Ze/PCI found at 0x%lx ", - (ulong) cy_pci_phys2); - printk("but could not allocate IRQ%d.\n", - cy_pci_irq); - return i; + &cy_card[card_no]); + if (retval) { + dev_err(&pdev->dev, "could not allocate IRQ\n"); + goto err_unmap; } } #endif /* CONFIG_CYZ_INTR */ + cy_card[card_no].num_chips = -1; + } - /* set cy_card */ - cy_card[j].base_phys = cy_pci_phys2; - cy_card[j].ctl_phys = cy_pci_phys0; - cy_card[j].base_addr = cy_pci_addr2; - cy_card[j].ctl_addr = cy_pci_addr0; - cy_card[j].irq = (int)cy_pci_irq; - cy_card[j].bus_index = 1; - cy_card[j].first_line = cy_next_channel; - cy_card[j].num_chips = -1; - cy_card[j].pdev = pdev; + /* set cy_card */ + cy_card[card_no].base_addr = addr2; + cy_card[card_no].ctl_addr = addr0; + cy_card[card_no].irq = irq; + cy_card[card_no].bus_index = 1; + cy_card[card_no].first_line = cy_next_channel; + retval = cy_init_card(&cy_card[card_no]); + if (retval) + goto err_null; - /* print message */ -#ifdef CONFIG_CYZ_INTR - /* don't report IRQ if board is no IRQ */ - if ((cy_pci_irq != 0) && (cy_pci_irq != 255)) - printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, IRQ%d, ", - j + 1, (ulong) cy_pci_phys2, - (ulong) (cy_pci_phys2 + CyPCI_Ze_win - 1), - (int)cy_pci_irq); - else -#endif /* CONFIG_CYZ_INTR */ - printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, ", - j + 1, (ulong) cy_pci_phys2, - (ulong) (cy_pci_phys2 + CyPCI_Ze_win - 1)); + pci_set_drvdata(pdev, &cy_card[card_no]); - printk("%d channels starting from port %d.\n", - cy_pci_nchan, cy_next_channel); - cy_next_channel += cy_pci_nchan; - } - if (ZeIndex != 0) { - printk("Cyclades-Ze/PCI found at 0x%x but no more cards can be " - "used.\nChange NR_CARDS in cyclades.c and recompile " - "kernel.\n", (unsigned int)Ze_phys2[0]); + if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo || + device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) { + /* enable interrupts in the PCI interface */ + plx_ver = readb(addr2 + CyPLX_VER) & 0x0f; + switch (plx_ver) { + case PLX_9050: + + cy_writeb(addr0 + 0x4c, 0x43); + break; + + case PLX_9060: + case PLX_9080: + default: /* Old boards, use PLX_9060 */ + + plx_init(addr0, 0x6c); + /* For some yet unknown reason, once the PLX9060 reloads + the EEPROM, the IRQ is lost and, thus, we have to + re-write it to the PCI config. registers. + This will remain here until we find a permanent + fix. */ + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, irq); + + cy_writew(addr0 + 0x68, readw(addr0 + 0x68) | 0x0900); + break; + } } - return i; -#else + + dev_info(&pdev->dev, "%s/PCI #%d found: %d channels starting from " + "port %d.\n", card_name, card_no + 1, nchan, cy_next_channel); + for (i = cy_next_channel; i < cy_next_channel + nchan; i++) + tty_register_device(cy_serial_driver, i, &pdev->dev); + cy_next_channel += nchan; + return 0; -#endif /* ifdef CONFIG_PCI */ -} /* cy_detect_pci */ +err_null: + cy_card[card_no].base_addr = NULL; + free_irq(irq, &cy_card[card_no]); +err_unmap: + pci_iounmap(pdev, addr0); + if (addr2) + pci_iounmap(pdev, addr2); +err_reg: + pci_release_regions(pdev); +err_dis: + pci_disable_device(pdev); +err: + return retval; +} -/* - * This routine prints out the appropriate serial driver version number - * and identifies which options were configured into this driver. - */ -static inline void show_version(void) +static void __devexit cy_pci_remove(struct pci_dev *pdev) { - printk("Cyclades driver " CY_VERSION "\n"); - printk(" built %s %s\n", __DATE__, __TIME__); -} /* show_version */ + struct cyclades_card *cinfo = pci_get_drvdata(pdev); + unsigned int i; + + /* non-Z with old PLX */ + if (!IS_CYC_Z(*cinfo) && (readb(cinfo->base_addr + CyPLX_VER) & 0x0f) == + PLX_9050) + cy_writeb(cinfo->ctl_addr + 0x4c, 0); + else +#ifndef CONFIG_CYZ_INTR + if (!IS_CYC_Z(*cinfo)) +#endif + cy_writew(cinfo->ctl_addr + 0x68, + readw(cinfo->ctl_addr + 0x68) & ~0x0900); + + pci_iounmap(pdev, cinfo->base_addr); + if (cinfo->ctl_addr) + pci_iounmap(pdev, cinfo->ctl_addr); + if (cinfo->irq +#ifndef CONFIG_CYZ_INTR + && !IS_CYC_Z(*cinfo) +#endif /* CONFIG_CYZ_INTR */ + ) + free_irq(cinfo->irq, cinfo); + pci_release_regions(pdev); + + cinfo->base_addr = NULL; + for (i = cinfo->first_line; i < cinfo->first_line + + cinfo->nports; i++) + tty_unregister_device(cy_serial_driver, i); + cinfo->nports = 0; + kfree(cinfo->ports); +} + +static struct pci_driver cy_pci_driver = { + .name = "cyclades", + .id_table = cy_pci_dev_id, + .probe = cy_pci_probe, + .remove = __devexit_p(cy_pci_remove) +}; +#endif static int cyclades_get_proc_info(char *buf, char **start, off_t offset, int length, int *eof, void *data) { struct cyclades_port *info; - int i; + unsigned int i, j; int len = 0; off_t begin = 0; off_t pos = 0; @@ -5238,33 +5054,34 @@ cyclades_get_proc_info(char *buf, char **start, off_t offset, int length, len += size; /* Output one line for each known port */ - for (i = 0; i < NR_PORTS && cy_port[i].line >= 0; i++) { - info = &cy_port[i]; - - if (info->count) - size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu " - "%8lu %9lu %6ld\n", info->line, - (cur_jifs - info->idle_stats.in_use) / HZ, - info->idle_stats.xmit_bytes, - (cur_jifs - info->idle_stats.xmit_idle) / HZ, - info->idle_stats.recv_bytes, - (cur_jifs - info->idle_stats.recv_idle) / HZ, - info->idle_stats.overruns, - (long)info->tty->ldisc.num); - else - size = sprintf(buf + len, "%3d %8lu %10lu %8lu %10lu " - "%8lu %9lu %6ld\n", - info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); - len += size; - pos = begin + len; - - if (pos < offset) { - len = 0; - begin = pos; + for (i = 0; i < NR_CARDS; i++) + for (j = 0; j < cy_card[i].nports; j++) { + info = &cy_card[i].ports[j]; + + if (info->count) + size = sprintf(buf + len, "%3d %8lu %10lu %8lu " + "%10lu %8lu %9lu %6ld\n", info->line, + (cur_jifs - info->idle_stats.in_use) / + HZ, info->idle_stats.xmit_bytes, + (cur_jifs - info->idle_stats.xmit_idle)/ + HZ, info->idle_stats.recv_bytes, + (cur_jifs - info->idle_stats.recv_idle)/ + HZ, info->idle_stats.overruns, + (long)info->tty->ldisc.num); + else + size = sprintf(buf + len, "%3d %8lu %10lu %8lu " + "%10lu %8lu %9lu %6ld\n", + info->line, 0L, 0L, 0L, 0L, 0L, 0L, 0L); + len += size; + pos = begin + len; + + if (pos < offset) { + len = 0; + begin = pos; + } + if (pos > offset + length) + goto done; } - if (pos > offset + length) - goto done; - } *eof = 1; done: *start = buf + (offset - begin); /* Start of wanted data */ @@ -5319,18 +5136,15 @@ static const struct tty_operations cy_ops = { static int __init cy_init(void) { - struct cyclades_port *info; - struct cyclades_card *cinfo; - int number_z_boards = 0; - int board, port, i, index; - unsigned long mailbox; - unsigned short chip_number; - int nports; + unsigned int nboards; + int retval = -ENOMEM; cy_serial_driver = alloc_tty_driver(NR_PORTS); if (!cy_serial_driver) - return -ENOMEM; - show_version(); + goto err; + + printk(KERN_INFO "Cyclades driver " CY_VERSION " (built %s %s)\n", + __DATE__, __TIME__); /* Initialize the tty_driver structure */ @@ -5344,15 +5158,13 @@ static int __init cy_init(void) cy_serial_driver->init_termios = tty_std_termios; cy_serial_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - cy_serial_driver->flags = TTY_DRIVER_REAL_RAW; + cy_serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; tty_set_operations(cy_serial_driver, &cy_ops); - if (tty_register_driver(cy_serial_driver)) - panic("Couldn't register Cyclades serial driver\n"); - - for (i = 0; i < NR_CARDS; i++) { - /* base_addr=0 indicates board not found */ - cy_card[i].base_addr = NULL; + retval = tty_register_driver(cy_serial_driver); + if (retval) { + printk(KERN_ERR "Couldn't register Cyclades serial driver\n"); + goto err_frtty; } /* the code below is responsible to find the boards. Each different @@ -5363,223 +5175,68 @@ static int __init cy_init(void) the cy_next_channel. */ /* look for isa boards */ - cy_isa_nboard = cy_detect_isa(); + nboards = cy_detect_isa(); +#ifdef CONFIG_PCI /* look for pci boards */ - cy_pci_nboard = cy_detect_pci(); - - cy_nboard = cy_isa_nboard + cy_pci_nboard; - - /* invalidate remaining cy_card structures */ - for (i = 0; i < NR_CARDS; i++) { - if (cy_card[i].base_addr == 0) { - cy_card[i].first_line = -1; - cy_card[i].ctl_addr = NULL; - cy_card[i].irq = 0; - cy_card[i].bus_index = 0; - cy_card[i].first_line = 0; - cy_card[i].num_chips = 0; - } - } - /* invalidate remaining cy_port structures */ - for (i = cy_next_channel; i < NR_PORTS; i++) { - cy_port[i].line = -1; - cy_port[i].magic = -1; - } - - /* initialize per-port data structures for each valid board found */ - for (board = 0; board < cy_nboard; board++) { - cinfo = &cy_card[board]; - if (cinfo->num_chips == -1) { /* Cyclades-Z */ - number_z_boards++; - mailbox = cy_readl(&((struct RUNTIME_9060 __iomem *) - cy_card[board].ctl_addr)-> - mail_box_0); - nports = (mailbox == ZE_V1) ? ZE_V1_NPORTS : 8; - cinfo->intr_enabled = 0; - cinfo->nports = 0; /* Will be correctly set later, after - Z FW is loaded */ - spin_lock_init(&cinfo->card_lock); - for (port = cinfo->first_line; - port < cinfo->first_line + nports; port++) { - info = &cy_port[port]; - info->magic = CYCLADES_MAGIC; - info->type = PORT_STARTECH; - info->card = board; - info->line = port; - info->chip_rev = 0; - info->flags = STD_COM_FLAGS; - info->tty = NULL; - if (mailbox == ZO_V1) - info->xmit_fifo_size = CYZ_FIFO_SIZE; - else - info->xmit_fifo_size = - 4 * CYZ_FIFO_SIZE; - info->cor1 = 0; - info->cor2 = 0; - info->cor3 = 0; - info->cor4 = 0; - info->cor5 = 0; - info->tbpr = 0; - info->tco = 0; - info->rbpr = 0; - info->rco = 0; - info->custom_divisor = 0; - info->close_delay = 5 * HZ / 10; - info->closing_wait = CLOSING_WAIT_DELAY; - info->icount.cts = info->icount.dsr = - info->icount.rng = info->icount.dcd = 0; - info->icount.rx = info->icount.tx = 0; - info->icount.frame = info->icount.parity = 0; - info->icount.overrun = info->icount.brk = 0; - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - info->default_threshold = 0; - info->default_timeout = 0; - INIT_WORK(&info->tqueue, do_softint); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->shutdown_wait); - init_waitqueue_head(&info->delta_msr_wait); - /* info->session */ - /* info->pgrp */ - info->read_status_mask = 0; - /* info->timeout */ - /* Bentson's vars */ - info->jiffies[0] = 0; - info->jiffies[1] = 0; - info->jiffies[2] = 0; - info->rflush_count = 0; -#ifdef CONFIG_CYZ_INTR - init_timer(&cyz_rx_full_timer[port]); - cyz_rx_full_timer[port].function = NULL; + retval = pci_register_driver(&cy_pci_driver); + if (retval && !nboards) + goto err_unr; #endif - } - continue; - } else { /* Cyclom-Y of some kind */ - index = cinfo->bus_index; - spin_lock_init(&cinfo->card_lock); - cinfo->nports = CyPORTS_PER_CHIP * cinfo->num_chips; - for (port = cinfo->first_line; - port < cinfo->first_line + cinfo->nports; port++) { - info = &cy_port[port]; - info->magic = CYCLADES_MAGIC; - info->type = PORT_CIRRUS; - info->card = board; - info->line = port; - info->flags = STD_COM_FLAGS; - info->tty = NULL; - info->xmit_fifo_size = CyMAX_CHAR_FIFO; - info->cor1 = - CyPARITY_NONE | Cy_1_STOP | Cy_8_BITS; - info->cor2 = CyETC; - info->cor3 = 0x08; /* _very_ small rcv threshold */ - info->cor4 = 0; - info->cor5 = 0; - info->custom_divisor = 0; - info->close_delay = 5 * HZ / 10; - info->closing_wait = CLOSING_WAIT_DELAY; - info->icount.cts = info->icount.dsr = - info->icount.rng = info->icount.dcd = 0; - info->icount.rx = info->icount.tx = 0; - info->icount.frame = info->icount.parity = 0; - info->icount.overrun = info->icount.brk = 0; - chip_number = (port - cinfo->first_line) / 4; - if ((info->chip_rev = - cy_readb(cinfo->base_addr + - (cy_chip_offset[chip_number] << - index) + (CyGFRCR << index))) >= - CD1400_REV_J) { - /* It is a CD1400 rev. J or later */ - info->tbpr = baud_bpr_60[13]; /* Tx BPR */ - info->tco = baud_co_60[13]; /* Tx CO */ - info->rbpr = baud_bpr_60[13]; /* Rx BPR */ - info->rco = baud_co_60[13]; /* Rx CO */ - info->rflow = 0; - info->rtsdtr_inv = 1; - } else { - info->tbpr = baud_bpr_25[13]; /* Tx BPR */ - info->tco = baud_co_25[13]; /* Tx CO */ - info->rbpr = baud_bpr_25[13]; /* Rx BPR */ - info->rco = baud_co_25[13]; /* Rx CO */ - info->rflow = 0; - info->rtsdtr_inv = 0; - } - info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; - info->default_threshold = 0; - info->default_timeout = 0; - INIT_WORK(&info->tqueue, do_softint); - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); - init_waitqueue_head(&info->shutdown_wait); - init_waitqueue_head(&info->delta_msr_wait); - /* info->session */ - /* info->pgrp */ - info->read_status_mask = - CyTIMEOUT | CySPECHAR | CyBREAK - | CyPARITY | CyFRAME | CyOVERRUN; - /* info->timeout */ - } - } - } - -#ifndef CONFIG_CYZ_INTR - if (number_z_boards && !cyz_timeron) { - cyz_timeron++; - cyz_timerlist.expires = jiffies + 1; - add_timer(&cyz_timerlist); -#ifdef CY_PCI_DEBUG - printk("Cyclades-Z polling initialized\n"); -#endif - } -#endif /* CONFIG_CYZ_INTR */ return 0; - +err_unr: + tty_unregister_driver(cy_serial_driver); +err_frtty: + put_tty_driver(cy_serial_driver); +err: + return retval; } /* cy_init */ static void __exit cy_cleanup_module(void) { + struct cyclades_card *card; int i, e1; #ifndef CONFIG_CYZ_INTR - if (cyz_timeron){ - cyz_timeron = 0; - del_timer(&cyz_timerlist); - } + del_timer_sync(&cyz_timerlist); #endif /* CONFIG_CYZ_INTR */ if ((e1 = tty_unregister_driver(cy_serial_driver))) - printk("cyc: failed to unregister Cyclades serial driver(%d)\n", - e1); + printk(KERN_ERR "failed to unregister Cyclades serial " + "driver(%d)\n", e1); - put_tty_driver(cy_serial_driver); +#ifdef CONFIG_PCI + pci_unregister_driver(&cy_pci_driver); +#endif for (i = 0; i < NR_CARDS; i++) { - if (cy_card[i].base_addr) { - iounmap(cy_card[i].base_addr); - if (cy_card[i].ctl_addr) - iounmap(cy_card[i].ctl_addr); - if (cy_card[i].irq + card = &cy_card[i]; + if (card->base_addr) { + /* clear interrupt */ + cy_writeb(card->base_addr + Cy_ClrIntr, 0); + iounmap(card->base_addr); + if (card->ctl_addr) + iounmap(card->ctl_addr); + if (card->irq #ifndef CONFIG_CYZ_INTR - && cy_card[i].num_chips != -1 /* not a Z card */ + && !IS_CYC_Z(*card) #endif /* CONFIG_CYZ_INTR */ ) - free_irq(cy_card[i].irq, &cy_card[i]); -#ifdef CONFIG_PCI - if (cy_card[i].pdev) - pci_release_regions(cy_card[i].pdev); -#endif + free_irq(card->irq, card); + for (e1 = card->first_line; + e1 < card->first_line + + card->nports; e1++) + tty_unregister_device(cy_serial_driver, e1); + kfree(card->ports); } } + + put_tty_driver(cy_serial_driver); } /* cy_cleanup_module */ module_init(cy_init); module_exit(cy_cleanup_module); MODULE_LICENSE("GPL"); +MODULE_VERSION(CY_VERSION); diff --git a/drivers/char/digi.h b/drivers/char/digi.h deleted file mode 100644 index 19df0e879b1b..000000000000 --- a/drivers/char/digi.h +++ /dev/null @@ -1,71 +0,0 @@ -/* Definitions for DigiBoard ditty(1) command. */ - -#if !defined(TIOCMODG) -#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */ -#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */ -#endif - -#if !defined(TIOCMSET) -#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */ -#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */ -#endif - -#if !defined(TIOCMBIC) -#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */ -#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */ -#endif - -#if !defined(TIOCSDTR) -#define TIOCSDTR (('e'<<8) | 0) /* set DTR */ -#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */ -#endif - -/************************************************************************ - * Ioctl command arguments for DIGI parameters. - ************************************************************************/ -#define DIGI_GETA (('e'<<8) | 94) /* Read params */ - -#define DIGI_SETA (('e'<<8) | 95) /* Set params */ -#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */ -#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */ - -#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */ - /* control characters */ -#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */ - /* control characters */ -#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */ - /* flow control chars */ -#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */ - /* flow control chars */ - -struct digiflow_struct { - unsigned char startc; /* flow cntl start char */ - unsigned char stopc; /* flow cntl stop char */ -}; - -typedef struct digiflow_struct digiflow_t; - - -/************************************************************************ - * Values for digi_flags - ************************************************************************/ -#define DIGI_IXON 0x0001 /* Handle IXON in the FEP */ -#define DIGI_FAST 0x0002 /* Fast baud rates */ -#define RTSPACE 0x0004 /* RTS input flow control */ -#define CTSPACE 0x0008 /* CTS output flow control */ -#define DSRPACE 0x0010 /* DSR output flow control */ -#define DCDPACE 0x0020 /* DCD output flow control */ -#define DTRPACE 0x0040 /* DTR input flow control */ -#define DIGI_FORCEDCD 0x0100 /* Force carrier */ -#define DIGI_ALTPIN 0x0200 /* Alternate RJ-45 pin config */ -#define DIGI_AIXON 0x0400 /* Aux flow control in fep */ - - -/************************************************************************ - * Structure used with ioctl commands for DIGI parameters. - ************************************************************************/ -struct digi_struct { - unsigned short digi_flags; /* Flags (see above) */ -}; - -typedef struct digi_struct digi_t; diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c index bd7be09ea53d..5b91bc04ea4e 100644 --- a/drivers/char/drm/ati_pcigart.c +++ b/drivers/char/drm/ati_pcigart.c @@ -33,59 +33,44 @@ #include "drmP.h" -#if PAGE_SIZE == 65536 -# define ATI_PCIGART_TABLE_ORDER 0 -# define ATI_PCIGART_TABLE_PAGES (1 << 0) -#elif PAGE_SIZE == 16384 -# define ATI_PCIGART_TABLE_ORDER 1 -# define ATI_PCIGART_TABLE_PAGES (1 << 1) -#elif PAGE_SIZE == 8192 -# define ATI_PCIGART_TABLE_ORDER 2 -# define ATI_PCIGART_TABLE_PAGES (1 << 2) -#elif PAGE_SIZE == 4096 -# define ATI_PCIGART_TABLE_ORDER 3 -# define ATI_PCIGART_TABLE_PAGES (1 << 3) -#else -# error - PAGE_SIZE not 64K, 16K, 8K or 4K -#endif - -# define ATI_MAX_PCIGART_PAGES 8192 /**< 32 MB aperture, 4K pages */ # define ATI_PCIGART_PAGE_SIZE 4096 /**< PCI GART page size */ -static void *drm_ati_alloc_pcigart_table(void) +static void *drm_ati_alloc_pcigart_table(int order) { unsigned long address; struct page *page; int i; - DRM_DEBUG("%s\n", __FUNCTION__); + + DRM_DEBUG("%s: alloc %d order\n", __FUNCTION__, order); address = __get_free_pages(GFP_KERNEL | __GFP_COMP, - ATI_PCIGART_TABLE_ORDER); + order); if (address == 0UL) { return NULL; } page = virt_to_page(address); - for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++) + for (i = 0; i < order; i++, page++) SetPageReserved(page); DRM_DEBUG("%s: returning 0x%08lx\n", __FUNCTION__, address); return (void *)address; } -static void drm_ati_free_pcigart_table(void *address) +static void drm_ati_free_pcigart_table(void *address, int order) { struct page *page; int i; + int num_pages = 1 << order; DRM_DEBUG("%s\n", __FUNCTION__); page = virt_to_page((unsigned long)address); - for (i = 0; i < ATI_PCIGART_TABLE_PAGES; i++, page++) + for (i = 0; i < num_pages; i++, page++) ClearPageReserved(page); - free_pages((unsigned long)address, ATI_PCIGART_TABLE_ORDER); + free_pages((unsigned long)address, order); } int drm_ati_pcigart_cleanup(drm_device_t *dev, drm_ati_pcigart_info *gart_info) @@ -93,6 +78,8 @@ int drm_ati_pcigart_cleanup(drm_device_t *dev, drm_ati_pcigart_info *gart_info) drm_sg_mem_t *entry = dev->sg; unsigned long pages; int i; + int order; + int num_pages, max_pages; /* we need to support large memory configurations */ if (!entry) { @@ -100,15 +87,19 @@ int drm_ati_pcigart_cleanup(drm_device_t *dev, drm_ati_pcigart_info *gart_info) return 0; } + order = drm_order((gart_info->table_size + (PAGE_SIZE-1)) / PAGE_SIZE); + num_pages = 1 << order; + if (gart_info->bus_addr) { if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) { pci_unmap_single(dev->pdev, gart_info->bus_addr, - ATI_PCIGART_TABLE_PAGES * PAGE_SIZE, + num_pages * PAGE_SIZE, PCI_DMA_TODEVICE); } - pages = (entry->pages <= ATI_MAX_PCIGART_PAGES) - ? entry->pages : ATI_MAX_PCIGART_PAGES; + max_pages = (gart_info->table_size / sizeof(u32)); + pages = (entry->pages <= max_pages) + ? entry->pages : max_pages; for (i = 0; i < pages; i++) { if (!entry->busaddr[i]) @@ -123,13 +114,12 @@ int drm_ati_pcigart_cleanup(drm_device_t *dev, drm_ati_pcigart_info *gart_info) if (gart_info->gart_table_location == DRM_ATI_GART_MAIN && gart_info->addr) { - drm_ati_free_pcigart_table(gart_info->addr); + drm_ati_free_pcigart_table(gart_info->addr, order); gart_info->addr = NULL; } return 1; } - EXPORT_SYMBOL(drm_ati_pcigart_cleanup); int drm_ati_pcigart_init(drm_device_t *dev, drm_ati_pcigart_info *gart_info) @@ -139,6 +129,9 @@ int drm_ati_pcigart_init(drm_device_t *dev, drm_ati_pcigart_info *gart_info) unsigned long pages; u32 *pci_gart, page_base, bus_address = 0; int i, j, ret = 0; + int order; + int max_pages; + int num_pages; if (!entry) { DRM_ERROR("no scatter/gather memory!\n"); @@ -148,7 +141,10 @@ int drm_ati_pcigart_init(drm_device_t *dev, drm_ati_pcigart_info *gart_info) if (gart_info->gart_table_location == DRM_ATI_GART_MAIN) { DRM_DEBUG("PCI: no table in VRAM: using normal RAM\n"); - address = drm_ati_alloc_pcigart_table(); + order = drm_order((gart_info->table_size + + (PAGE_SIZE-1)) / PAGE_SIZE); + num_pages = 1 << order; + address = drm_ati_alloc_pcigart_table(order); if (!address) { DRM_ERROR("cannot allocate PCI GART page!\n"); goto done; @@ -160,11 +156,13 @@ int drm_ati_pcigart_init(drm_device_t *dev, drm_ati_pcigart_info *gart_info) } bus_address = pci_map_single(dev->pdev, address, - ATI_PCIGART_TABLE_PAGES * - PAGE_SIZE, PCI_DMA_TODEVICE); + num_pages * PAGE_SIZE, + PCI_DMA_TODEVICE); if (bus_address == 0) { DRM_ERROR("unable to map PCIGART pages!\n"); - drm_ati_free_pcigart_table(address); + order = drm_order((gart_info->table_size + + (PAGE_SIZE-1)) / PAGE_SIZE); + drm_ati_free_pcigart_table(address, order); address = NULL; goto done; } @@ -177,10 +175,11 @@ int drm_ati_pcigart_init(drm_device_t *dev, drm_ati_pcigart_info *gart_info) pci_gart = (u32 *) address; - pages = (entry->pages <= ATI_MAX_PCIGART_PAGES) - ? entry->pages : ATI_MAX_PCIGART_PAGES; + max_pages = (gart_info->table_size / sizeof(u32)); + pages = (entry->pages <= max_pages) + ? entry->pages : max_pages; - memset(pci_gart, 0, ATI_MAX_PCIGART_PAGES * sizeof(u32)); + memset(pci_gart, 0, max_pages * sizeof(u32)); for (i = 0; i < pages; i++) { /* we need to support large memory configurations */ @@ -198,10 +197,18 @@ int drm_ati_pcigart_init(drm_device_t *dev, drm_ati_pcigart_info *gart_info) page_base = (u32) entry->busaddr[i]; for (j = 0; j < (PAGE_SIZE / ATI_PCIGART_PAGE_SIZE); j++) { - if (gart_info->is_pcie) + switch(gart_info->gart_reg_if) { + case DRM_ATI_GART_IGP: + *pci_gart = cpu_to_le32((page_base) | 0xc); + break; + case DRM_ATI_GART_PCIE: *pci_gart = cpu_to_le32((page_base >> 8) | 0xc); - else + break; + default: + case DRM_ATI_GART_PCI: *pci_gart = cpu_to_le32(page_base); + break; + } pci_gart++; page_base += ATI_PCIGART_PAGE_SIZE; } @@ -220,5 +227,4 @@ int drm_ati_pcigart_init(drm_device_t *dev, drm_ati_pcigart_info *gart_info) gart_info->bus_addr = bus_address; return ret; } - EXPORT_SYMBOL(drm_ati_pcigart_init); diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h index 80041d5b792d..d494315752a2 100644 --- a/drivers/char/drm/drmP.h +++ b/drivers/char/drm/drmP.h @@ -519,12 +519,17 @@ typedef struct drm_vbl_sig { #define DRM_ATI_GART_MAIN 1 #define DRM_ATI_GART_FB 2 +#define DRM_ATI_GART_PCI 1 +#define DRM_ATI_GART_PCIE 2 +#define DRM_ATI_GART_IGP 3 + typedef struct ati_pcigart_info { int gart_table_location; - int is_pcie; + int gart_reg_if; void *addr; dma_addr_t bus_addr; drm_local_map_t mapping; + int table_size; } drm_ati_pcigart_info; /* diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 26bec30ee86e..8e77b7ed0f44 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -15,8 +15,6 @@ * #define DRIVER_DESC "Matrox G200/G400" * #define DRIVER_DATE "20001127" * - * #define DRIVER_IOCTL_COUNT DRM_ARRAY_SIZE( mga_ioctls ) - * * #define drm_x mga_##x * \endcode */ @@ -120,7 +118,7 @@ static drm_ioctl_desc_t drm_ioctls[] = { [DRM_IOCTL_NR(DRM_IOCTL_UPDATE_DRAW)] = {drm_update_drawable_info, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY}, }; -#define DRIVER_IOCTL_COUNT ARRAY_SIZE( drm_ioctls ) +#define DRM_CORE_IOCTL_COUNT ARRAY_SIZE( drm_ioctls ) /** * Take down the DRM device. @@ -496,11 +494,11 @@ int drm_ioctl(struct inode *inode, struct file *filp, (long)old_encode_dev(priv->head->device), priv->authenticated); - if ((nr >= DRIVER_IOCTL_COUNT) && + if ((nr >= DRM_CORE_IOCTL_COUNT) && ((nr < DRM_COMMAND_BASE) || (nr >= DRM_COMMAND_END))) goto err_i1; - if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) - && (nr < DRM_COMMAND_BASE + dev->driver->num_ioctls)) + if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) && + (nr < DRM_COMMAND_BASE + dev->driver->num_ioctls)) ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE]; else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) ioctl = &drm_ioctls[nr]; diff --git a/drivers/char/drm/drm_os_linux.h b/drivers/char/drm/drm_os_linux.h index 2908b72daa6e..0fe7b4497927 100644 --- a/drivers/char/drm/drm_os_linux.h +++ b/drivers/char/drm/drm_os_linux.h @@ -70,9 +70,6 @@ static __inline__ int mtrr_del(int reg, unsigned long base, unsigned long size) #endif -/** Task queue handler arguments */ -#define DRM_TASKQUEUE_ARGS void *arg - /** For data going into the kernel through the ioctl argument */ #define DRM_COPY_FROM_USER_IOCTL(arg1, arg2, arg3) \ if ( copy_from_user(&arg1, arg2, arg3) ) \ diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index 01cf482d2d00..31cdde83713b 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -102,6 +102,7 @@ {0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \ {0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \ + {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ {0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ diff --git a/drivers/char/drm/r128_cce.c b/drivers/char/drm/r128_cce.c index db5a60450e68..1014602c43a7 100644 --- a/drivers/char/drm/r128_cce.c +++ b/drivers/char/drm/r128_cce.c @@ -560,9 +560,10 @@ static int r128_do_init_cce(drm_device_t * dev, drm_r128_init_t * init) if (dev_priv->is_pci) { #endif dev_priv->gart_info.gart_table_location = DRM_ATI_GART_MAIN; + dev_priv->gart_info.table_size = R128_PCIGART_TABLE_SIZE; dev_priv->gart_info.addr = NULL; dev_priv->gart_info.bus_addr = 0; - dev_priv->gart_info.is_pcie = 0; + dev_priv->gart_info.gart_reg_if = DRM_ATI_GART_PCI; if (!drm_ati_pcigart_init(dev, &dev_priv->gart_info)) { DRM_ERROR("failed to init PCI GART!\n"); dev->dev_private = (void *)dev_priv; diff --git a/drivers/char/drm/r128_drv.h b/drivers/char/drm/r128_drv.h index f1efb49de8df..9086835686dc 100644 --- a/drivers/char/drm/r128_drv.h +++ b/drivers/char/drm/r128_drv.h @@ -383,6 +383,8 @@ extern long r128_compat_ioctl(struct file *filp, unsigned int cmd, #define R128_PERFORMANCE_BOXES 0 +#define R128_PCIGART_TABLE_SIZE 32768 + #define R128_READ(reg) DRM_READ32( dev_priv->mmio, (reg) ) #define R128_WRITE(reg,val) DRM_WRITE32( dev_priv->mmio, (reg), (val) ) #define R128_READ8(reg) DRM_READ8( dev_priv->mmio, (reg) ) diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index c1850ecac302..68338389d836 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -830,6 +830,15 @@ static int RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr) return RADEON_READ(RADEON_PCIE_DATA); } +static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr) +{ + u32 ret; + RADEON_WRITE(RADEON_IGPGART_INDEX, addr & 0x7f); + ret = RADEON_READ(RADEON_IGPGART_DATA); + RADEON_WRITE(RADEON_IGPGART_INDEX, 0x7f); + return ret; +} + #if RADEON_FIFO_DEBUG static void radeon_status(drm_radeon_private_t * dev_priv) { @@ -1267,7 +1276,44 @@ static void radeon_test_writeback(drm_radeon_private_t * dev_priv) } } -/* Enable or disable PCI-E GART on the chip */ +/* Enable or disable IGP GART on the chip */ +static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) +{ + u32 temp, tmp; + + tmp = RADEON_READ(RADEON_AIC_CNTL); + if (on) { + DRM_DEBUG("programming igpgart %08X %08lX %08X\n", + dev_priv->gart_vm_start, + (long)dev_priv->gart_info.bus_addr, + dev_priv->gart_size); + + RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_18, 0x1000); + RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, 0x1); + RADEON_WRITE_IGPGART(RADEON_IGPGART_CTRL, 0x42040800); + RADEON_WRITE_IGPGART(RADEON_IGPGART_BASE_ADDR, + dev_priv->gart_info.bus_addr); + + temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_UNK_39); + RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_39, temp); + + RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); + dev_priv->gart_size = 32*1024*1024; + RADEON_WRITE(RADEON_MC_AGP_LOCATION, + (((dev_priv->gart_vm_start - 1 + + dev_priv->gart_size) & 0xffff0000) | + (dev_priv->gart_vm_start >> 16))); + + temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_ENABLE); + RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, temp); + + RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH); + RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x1); + RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH); + RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x0); + } +} + static void radeon_set_pciegart(drm_radeon_private_t * dev_priv, int on) { u32 tmp = RADEON_READ_PCIE(dev_priv, RADEON_PCIE_TX_GART_CNTL); @@ -1302,6 +1348,11 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) { u32 tmp; + if (dev_priv->flags & RADEON_IS_IGPGART) { + radeon_set_igpgart(dev_priv, on); + return; + } + if (dev_priv->flags & RADEON_IS_PCIE) { radeon_set_pciegart(dev_priv, on); return; @@ -1620,20 +1671,22 @@ static int radeon_do_init_cp(drm_device_t * dev, drm_radeon_init_t * init) #endif { /* if we have an offset set from userspace */ - if (dev_priv->pcigart_offset) { + if (dev_priv->pcigart_offset_set) { dev_priv->gart_info.bus_addr = dev_priv->pcigart_offset + dev_priv->fb_location; dev_priv->gart_info.mapping.offset = dev_priv->gart_info.bus_addr; dev_priv->gart_info.mapping.size = - RADEON_PCIGART_TABLE_SIZE; + dev_priv->gart_info.table_size; drm_core_ioremap(&dev_priv->gart_info.mapping, dev); dev_priv->gart_info.addr = dev_priv->gart_info.mapping.handle; - dev_priv->gart_info.is_pcie = - !!(dev_priv->flags & RADEON_IS_PCIE); + if (dev_priv->flags & RADEON_IS_PCIE) + dev_priv->gart_info.gart_reg_if = DRM_ATI_GART_PCIE; + else + dev_priv->gart_info.gart_reg_if = DRM_ATI_GART_PCI; dev_priv->gart_info.gart_table_location = DRM_ATI_GART_FB; @@ -1641,6 +1694,10 @@ static int radeon_do_init_cp(drm_device_t * dev, drm_radeon_init_t * init) dev_priv->gart_info.addr, dev_priv->pcigart_offset); } else { + if (dev_priv->flags & RADEON_IS_IGPGART) + dev_priv->gart_info.gart_reg_if = DRM_ATI_GART_IGP; + else + dev_priv->gart_info.gart_reg_if = DRM_ATI_GART_PCI; dev_priv->gart_info.gart_table_location = DRM_ATI_GART_MAIN; dev_priv->gart_info.addr = NULL; @@ -1714,7 +1771,7 @@ static int radeon_do_cleanup_cp(drm_device_t * dev) if (dev_priv->gart_info.gart_table_location == DRM_ATI_GART_FB) { drm_core_ioremapfree(&dev_priv->gart_info.mapping, dev); - dev_priv->gart_info.addr = NULL; + dev_priv->gart_info.addr = 0; } } /* only clear to the start of flags */ @@ -2222,6 +2279,8 @@ int radeon_driver_firstopen(struct drm_device *dev) drm_local_map_t *map; drm_radeon_private_t *dev_priv = dev->dev_private; + dev_priv->gart_info.table_size = RADEON_PCIGART_TABLE_SIZE; + ret = drm_addmap(dev, drm_get_resource_start(dev, 2), drm_get_resource_len(dev, 2), _DRM_REGISTERS, _DRM_READ_ONLY, &dev_priv->mmio); diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index 8d6350dd5360..66c4b6fed04f 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -707,6 +707,7 @@ typedef struct drm_radeon_setparam { #define RADEON_SETPARAM_SWITCH_TILING 2 /* enable/disable color tiling */ #define RADEON_SETPARAM_PCIGART_LOCATION 3 /* PCI Gart Location */ #define RADEON_SETPARAM_NEW_MEMMAP 4 /* Use new memory map */ +#define RADEON_SETPARAM_PCIGART_TABLE_SIZE 5 /* PCI GART Table Size */ /* 1.14: Clients can allocate/free a surface */ diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 8b105f1460a7..54f49ef4bef0 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -95,9 +95,11 @@ * 1.24- Add general-purpose packet for manipulating scratch registers (r300) * 1.25- Add support for r200 vertex programs (R200_EMIT_VAP_PVS_CNTL, * new packet type) + * 1.26- Add support for variable size PCI(E) gart aperture + * 1.27- Add support for IGP GART */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 25 +#define DRIVER_MINOR 27 #define DRIVER_PATCHLEVEL 0 /* @@ -143,6 +145,7 @@ enum radeon_chip_flags { RADEON_IS_PCIE = 0x00200000UL, RADEON_NEW_MEMMAP = 0x00400000UL, RADEON_IS_PCI = 0x00800000UL, + RADEON_IS_IGPGART = 0x01000000UL, }; #define GET_RING_HEAD(dev_priv) (dev_priv->writeback_works ? \ @@ -240,7 +243,6 @@ typedef struct drm_radeon_private { int do_boxes; int page_flipping; - int current_page; u32 color_fmt; unsigned int front_offset; @@ -280,6 +282,7 @@ typedef struct drm_radeon_private { struct radeon_virt_surface virt_surfaces[2 * RADEON_MAX_SURFACES]; unsigned long pcigart_offset; + unsigned int pcigart_offset_set; drm_ati_pcigart_info gart_info; u32 scratch_ages[5]; @@ -432,6 +435,15 @@ extern int r300_do_cp_cmdbuf(drm_device_t * dev, DRMFILE filp, #define RADEON_PCIE_TX_GART_END_LO 0x16 #define RADEON_PCIE_TX_GART_END_HI 0x17 +#define RADEON_IGPGART_INDEX 0x168 +#define RADEON_IGPGART_DATA 0x16c +#define RADEON_IGPGART_UNK_18 0x18 +#define RADEON_IGPGART_CTRL 0x2b +#define RADEON_IGPGART_BASE_ADDR 0x2c +#define RADEON_IGPGART_FLUSH 0x2e +#define RADEON_IGPGART_ENABLE 0x38 +#define RADEON_IGPGART_UNK_39 0x39 + #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 #define RADEON_MEM_SDRAM_MODE_REG 0x0158 @@ -964,6 +976,14 @@ do { \ RADEON_WRITE( RADEON_CLOCK_CNTL_DATA, (val) ); \ } while (0) +#define RADEON_WRITE_IGPGART( addr, val ) \ +do { \ + RADEON_WRITE( RADEON_IGPGART_INDEX, \ + ((addr) & 0x7f) | (1 << 8)); \ + RADEON_WRITE( RADEON_IGPGART_DATA, (val) ); \ + RADEON_WRITE( RADEON_IGPGART_INDEX, 0x7f ); \ +} while (0) + #define RADEON_WRITE_PCIE( addr, val ) \ do { \ RADEON_WRITE8( RADEON_PCIE_INDEX, \ diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index 938eccb78cc0..98c5f1d3a8e7 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -773,7 +773,7 @@ static void radeon_clear_box(drm_radeon_private_t * dev_priv, RADEON_GMC_SRC_DATATYPE_COLOR | RADEON_ROP3_P | RADEON_GMC_CLR_CMP_CNTL_DIS); - if (dev_priv->page_flipping && dev_priv->current_page == 1) { + if (dev_priv->sarea_priv->pfCurrentPage == 1) { OUT_RING(dev_priv->front_pitch_offset); } else { OUT_RING(dev_priv->back_pitch_offset); @@ -861,7 +861,7 @@ static void radeon_cp_dispatch_clear(drm_device_t * dev, dev_priv->stats.clears++; - if (dev_priv->page_flipping && dev_priv->current_page == 1) { + if (dev_priv->sarea_priv->pfCurrentPage == 1) { unsigned int tmp = flags; flags &= ~(RADEON_FRONT | RADEON_BACK); @@ -1382,7 +1382,7 @@ static void radeon_cp_dispatch_swap(drm_device_t * dev) /* Make this work even if front & back are flipped: */ OUT_RING(CP_PACKET0(RADEON_SRC_PITCH_OFFSET, 1)); - if (dev_priv->current_page == 0) { + if (dev_priv->sarea_priv->pfCurrentPage == 0) { OUT_RING(dev_priv->back_pitch_offset); OUT_RING(dev_priv->front_pitch_offset); } else { @@ -1416,12 +1416,12 @@ static void radeon_cp_dispatch_flip(drm_device_t * dev) { drm_radeon_private_t *dev_priv = dev->dev_private; drm_sarea_t *sarea = (drm_sarea_t *) dev_priv->sarea->handle; - int offset = (dev_priv->current_page == 1) + int offset = (dev_priv->sarea_priv->pfCurrentPage == 1) ? dev_priv->front_offset : dev_priv->back_offset; RING_LOCALS; - DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n", + DRM_DEBUG("%s: pfCurrentPage=%d\n", __FUNCTION__, - dev_priv->current_page, dev_priv->sarea_priv->pfCurrentPage); + dev_priv->sarea_priv->pfCurrentPage); /* Do some trivial performance monitoring... */ @@ -1449,8 +1449,8 @@ static void radeon_cp_dispatch_flip(drm_device_t * dev) * performing the swapbuffer ioctl. */ dev_priv->sarea_priv->last_frame++; - dev_priv->sarea_priv->pfCurrentPage = dev_priv->current_page = - 1 - dev_priv->current_page; + dev_priv->sarea_priv->pfCurrentPage = + 1 - dev_priv->sarea_priv->pfCurrentPage; BEGIN_RING(2); @@ -2152,24 +2152,10 @@ static int radeon_do_init_pageflip(drm_device_t * dev) ADVANCE_RING(); dev_priv->page_flipping = 1; - dev_priv->current_page = 0; - dev_priv->sarea_priv->pfCurrentPage = dev_priv->current_page; - return 0; -} - -/* Called whenever a client dies, from drm_release. - * NOTE: Lock isn't necessarily held when this is called! - */ -static int radeon_do_cleanup_pageflip(drm_device_t * dev) -{ - drm_radeon_private_t *dev_priv = dev->dev_private; - DRM_DEBUG("\n"); - - if (dev_priv->current_page != 0) - radeon_cp_dispatch_flip(dev); + if (dev_priv->sarea_priv->pfCurrentPage != 1) + dev_priv->sarea_priv->pfCurrentPage = 0; - dev_priv->page_flipping = 0; return 0; } @@ -3145,10 +3131,16 @@ static int radeon_cp_setparam(DRM_IOCTL_ARGS) break; case RADEON_SETPARAM_PCIGART_LOCATION: dev_priv->pcigart_offset = sp.value; + dev_priv->pcigart_offset_set = 1; break; case RADEON_SETPARAM_NEW_MEMMAP: dev_priv->new_memmap = sp.value; break; + case RADEON_SETPARAM_PCIGART_TABLE_SIZE: + dev_priv->gart_info.table_size = sp.value; + if (dev_priv->gart_info.table_size < RADEON_PCIGART_TABLE_SIZE) + dev_priv->gart_info.table_size = RADEON_PCIGART_TABLE_SIZE; + break; default: DRM_DEBUG("Invalid parameter %d\n", sp.param); return DRM_ERR(EINVAL); @@ -3168,9 +3160,7 @@ void radeon_driver_preclose(drm_device_t * dev, DRMFILE filp) { if (dev->dev_private) { drm_radeon_private_t *dev_priv = dev->dev_private; - if (dev_priv->page_flipping) { - radeon_do_cleanup_pageflip(dev); - } + dev_priv->page_flipping = 0; radeon_mem_release(filp, dev_priv->gart_heap); radeon_mem_release(filp, dev_priv->fb_heap); radeon_surfaces_release(filp, dev_priv); @@ -3179,6 +3169,14 @@ void radeon_driver_preclose(drm_device_t * dev, DRMFILE filp) void radeon_driver_lastclose(drm_device_t * dev) { + if (dev->dev_private) { + drm_radeon_private_t *dev_priv = dev->dev_private; + + if (dev_priv->sarea_priv && + dev_priv->sarea_priv->pfCurrentPage != 0) + radeon_cp_dispatch_flip(dev); + } + radeon_do_release(dev); } diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c index c0539c6299cf..13a9c5ca4593 100644 --- a/drivers/char/drm/via_dma.c +++ b/drivers/char/drm/via_dma.c @@ -252,7 +252,7 @@ static int via_dma_init(DRM_IOCTL_ARGS) break; case VIA_DMA_INITIALIZED: retcode = (dev_priv->ring.virtual_start != NULL) ? - 0 : DRM_ERR(EFAULT); + 0 : DRM_ERR(EFAULT); break; default: retcode = DRM_ERR(EINVAL); @@ -432,56 +432,34 @@ static int via_hook_segment(drm_via_private_t * dev_priv, { int paused, count; volatile uint32_t *paused_at = dev_priv->last_pause_ptr; + uint32_t reader,ptr; + paused = 0; via_flush_write_combine(); - while (!*(via_get_dma(dev_priv) - 1)) ; - *dev_priv->last_pause_ptr = pause_addr_lo; + (void) *(volatile uint32_t *)(via_get_dma(dev_priv) -1); + *paused_at = pause_addr_lo; via_flush_write_combine(); - - /* - * The below statement is inserted to really force the flush. - * Not sure it is needed. - */ - - while (!*dev_priv->last_pause_ptr) ; + (void) *paused_at; + reader = *(dev_priv->hw_addr_ptr); + ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) + + dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1; - while (!*dev_priv->last_pause_ptr) ; - paused = 0; - count = 20; - - while (!(paused = (VIA_READ(0x41c) & 0x80000000)) && count--) ; - if ((count <= 8) && (count >= 0)) { - uint32_t rgtr, ptr; - rgtr = *(dev_priv->hw_addr_ptr); - ptr = ((volatile char *)dev_priv->last_pause_ptr - - dev_priv->dma_ptr) + dev_priv->dma_offset + - (uint32_t) dev_priv->agpAddr + 4 - CMDBUF_ALIGNMENT_SIZE; - if (rgtr <= ptr) { - DRM_ERROR - ("Command regulator\npaused at count %d, address %x, " - "while current pause address is %x.\n" - "Please mail this message to " - "<unichrome-devel@lists.sourceforge.net>\n", count, - rgtr, ptr); - } + if ((ptr - reader) <= dev_priv->dma_diff ) { + count = 10000000; + while (!(paused = (VIA_READ(0x41c) & 0x80000000)) && count--); } if (paused && !no_pci_fire) { - uint32_t rgtr, ptr; - uint32_t ptr_low; + reader = *(dev_priv->hw_addr_ptr); + if ((ptr - reader) == dev_priv->dma_diff) { - count = 1000000; - while ((VIA_READ(VIA_REG_STATUS) & VIA_CMD_RGTR_BUSY) - && count--) ; + /* + * There is a concern that these writes may stall the PCI bus + * if the GPU is not idle. However, idling the GPU first + * doesn't make a difference. + */ - rgtr = *(dev_priv->hw_addr_ptr); - ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) + - dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; - - ptr_low = (ptr > 3 * CMDBUF_ALIGNMENT_SIZE) ? - ptr - 3 * CMDBUF_ALIGNMENT_SIZE : 0; - if (rgtr <= ptr && rgtr >= ptr_low) { VIA_WRITE(VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_hi); VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_lo); @@ -494,6 +472,9 @@ static int via_hook_segment(drm_via_private_t * dev_priv, static int via_wait_idle(drm_via_private_t * dev_priv) { int count = 10000000; + + while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && count--); + while (count-- && (VIA_READ(VIA_REG_STATUS) & (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY))) ; @@ -537,6 +518,9 @@ static void via_cmdbuf_start(drm_via_private_t * dev_priv) uint32_t end_addr, end_addr_lo; uint32_t command; uint32_t agp_base; + uint32_t ptr; + uint32_t reader; + int count; dev_priv->dma_low = 0; @@ -554,7 +538,7 @@ static void via_cmdbuf_start(drm_via_private_t * dev_priv) &pause_addr_hi, &pause_addr_lo, 1) - 1; via_flush_write_combine(); - while (!*dev_priv->last_pause_ptr) ; + (void) *(volatile uint32_t *)dev_priv->last_pause_ptr; VIA_WRITE(VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); VIA_WRITE(VIA_REG_TRANSPACE, command); @@ -566,6 +550,24 @@ static void via_cmdbuf_start(drm_via_private_t * dev_priv) DRM_WRITEMEMORYBARRIER(); VIA_WRITE(VIA_REG_TRANSPACE, command | HC_HAGPCMNT_MASK); VIA_READ(VIA_REG_TRANSPACE); + + dev_priv->dma_diff = 0; + + count = 10000000; + while (!(VIA_READ(0x41c) & 0x80000000) && count--); + + reader = *(dev_priv->hw_addr_ptr); + ptr = ((volatile char *)dev_priv->last_pause_ptr - dev_priv->dma_ptr) + + dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; + + /* + * This is the difference between where we tell the + * command reader to pause and where it actually pauses. + * This differs between hw implementation so we need to + * detect it. + */ + + dev_priv->dma_diff = ptr - reader; } static void via_pad_cache(drm_via_private_t * dev_priv, int qwords) @@ -592,7 +594,6 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv) uint32_t pause_addr_lo, pause_addr_hi; uint32_t jump_addr_lo, jump_addr_hi; volatile uint32_t *last_pause_ptr; - uint32_t dma_low_save1, dma_low_save2; agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi, @@ -619,31 +620,11 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv) &pause_addr_lo, 0); *last_pause_ptr = pause_addr_lo; - dma_low_save1 = dev_priv->dma_low; - - /* - * Now, set a trap that will pause the regulator if it tries to rerun the old - * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause - * and reissues the jump command over PCI, while the regulator has already taken the jump - * and actually paused at the current buffer end). - * There appears to be no other way to detect this condition, since the hw_addr_pointer - * does not seem to get updated immediately when a jump occurs. - */ - last_pause_ptr = - via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, - &pause_addr_lo, 0) - 1; - via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, - &pause_addr_lo, 0); - *last_pause_ptr = pause_addr_lo; - - dma_low_save2 = dev_priv->dma_low; - dev_priv->dma_low = dma_low_save1; - via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0); - dev_priv->dma_low = dma_low_save2; - via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); + via_hook_segment( dev_priv, jump_addr_hi, jump_addr_lo, 0); } + static void via_cmdbuf_rewind(drm_via_private_t * dev_priv) { via_cmdbuf_jump(dev_priv); diff --git a/drivers/char/drm/via_drv.h b/drivers/char/drm/via_drv.h index 8b8778d4a423..b46ca8e6306d 100644 --- a/drivers/char/drm/via_drv.h +++ b/drivers/char/drm/via_drv.h @@ -29,11 +29,11 @@ #define DRIVER_NAME "via" #define DRIVER_DESC "VIA Unichrome / Pro" -#define DRIVER_DATE "20061227" +#define DRIVER_DATE "20070202" #define DRIVER_MAJOR 2 #define DRIVER_MINOR 11 -#define DRIVER_PATCHLEVEL 0 +#define DRIVER_PATCHLEVEL 1 #include "via_verifier.h" @@ -93,6 +93,7 @@ typedef struct drm_via_private { unsigned long vram_offset; unsigned long agp_offset; drm_via_blitq_t blit_queues[VIA_NUM_BLIT_ENGINES]; + uint32_t dma_diff; } drm_via_private_t; enum via_family { diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c index 3d7efc26aad6..334ad5bbe6b6 100644 --- a/drivers/char/ds1620.c +++ b/drivers/char/ds1620.c @@ -4,7 +4,6 @@ */ #include <linux/module.h> #include <linux/miscdevice.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <linux/proc_fs.h> #include <linux/capability.h> diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c index db984e481d4c..9b8278e1f4f8 100644 --- a/drivers/char/dsp56k.c +++ b/drivers/char/dsp56k.c @@ -32,7 +32,6 @@ #include <linux/fs.h> #include <linux/mm.h> #include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/device.h> #include <asm/atarihw.h> diff --git a/drivers/char/dtlk.c b/drivers/char/dtlk.c index d8dbdb916232..abde6ddefe69 100644 --- a/drivers/char/dtlk.c +++ b/drivers/char/dtlk.c @@ -62,7 +62,6 @@ #include <linux/init.h> /* for __init, module_{init,exit} */ #include <linux/poll.h> /* for POLLIN, etc. */ #include <linux/dtlk.h> /* local header file for DoubleTalk values */ -#include <linux/smp_lock.h> #ifdef TRACING #define TRACE_TEXT(str) printk(str); @@ -325,16 +324,22 @@ static int dtlk_release(struct inode *inode, struct file *file) static int __init dtlk_init(void) { + int err; + dtlk_port_lpc = 0; dtlk_port_tts = 0; dtlk_busy = 0; dtlk_major = register_chrdev(0, "dtlk", &dtlk_fops); - if (dtlk_major == 0) { + if (dtlk_major < 0) { printk(KERN_ERR "DoubleTalk PC - cannot register device\n"); - return 0; + return dtlk_major; + } + err = dtlk_dev_probe(); + if (err) { + unregister_chrdev(dtlk_major, "dtlk"); + return err; } - if (dtlk_dev_probe() == 0) - printk(", MAJOR %d\n", dtlk_major); + printk(", MAJOR %d\n", dtlk_major); init_waitqueue_head(&dtlk_process_list); diff --git a/drivers/char/ec3104_keyb.c b/drivers/char/ec3104_keyb.c index 77f58ed6d59a..020011495d91 100644 --- a/drivers/char/ec3104_keyb.c +++ b/drivers/char/ec3104_keyb.c @@ -41,7 +41,6 @@ #include <linux/miscdevice.h> #include <linux/slab.h> #include <linux/kbd_kern.h> -#include <linux/smp_lock.h> #include <linux/bitops.h> #include <asm/keyboard.h> diff --git a/drivers/char/epca.c b/drivers/char/epca.c index de5be30484ad..c6c56fb8ba50 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -949,7 +949,7 @@ static int block_til_ready(struct tty_struct *tty, } /* End forever while */ - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&ch->open_wait, &wait); if (!tty_hung_up_p(filp)) ch->count++; diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c index 23b25ada65ea..49f914e79216 100644 --- a/drivers/char/genrtc.c +++ b/drivers/char/genrtc.c @@ -207,7 +207,7 @@ static ssize_t gen_rtc_read(struct file *file, char __user *buf, sizeof(unsigned long); } out: - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&gen_rtc_wait, &wait); return retval; diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c index ae76a9ffe89f..f0e7263dfcde 100644 --- a/drivers/char/hangcheck-timer.c +++ b/drivers/char/hangcheck-timer.c @@ -44,7 +44,6 @@ #include <linux/fs.h> #include <linux/mm.h> #include <linux/reboot.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/delay.h> #include <asm/uaccess.h> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 0f9ed7b46a6d..322bc5f7d86b 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -111,7 +111,7 @@ static int last_hvc = -1; * lock held. If successful, this function increments the kobject reference * count against the target hvc_struct so it should be released when finished. */ -struct hvc_struct *hvc_get_by_index(int index) +static struct hvc_struct *hvc_get_by_index(int index) { struct hvc_struct *hp; unsigned long flags; @@ -150,7 +150,8 @@ static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] = * hvc_console_setup() finds adapters. */ -void hvc_console_print(struct console *co, const char *b, unsigned count) +static void hvc_console_print(struct console *co, const char *b, + unsigned count) { char c[N_OUTBUF] __ALIGNED__; unsigned i = 0, n = 0; @@ -208,7 +209,7 @@ static int __init hvc_console_setup(struct console *co, char *options) return 0; } -struct console hvc_con_driver = { +static struct console hvc_con_driver = { .name = "hvc", .write = hvc_console_print, .device = hvc_console_device, @@ -278,7 +279,6 @@ int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops) return 0; } -EXPORT_SYMBOL(hvc_instantiate); /* Wake the sleeping khvcd */ static void hvc_kick(void) @@ -792,7 +792,6 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int irq, return hp; } -EXPORT_SYMBOL(hvc_alloc); int __devexit hvc_remove(struct hvc_struct *hp) { @@ -828,11 +827,10 @@ int __devexit hvc_remove(struct hvc_struct *hp) tty_hangup(tty); return 0; } -EXPORT_SYMBOL(hvc_remove); /* Driver initialization. Follow console initialization. This is where the TTY * interfaces start to become available. */ -int __init hvc_init(void) +static int __init hvc_init(void) { struct tty_driver *drv; diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index ec420fe8a908..b37f1d5a5be6 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -579,7 +579,7 @@ static int hvc_find_vtys(void) if (!vtermno) continue; - if (!device_is_compatible(vty, "IBM,iSeries-vty")) + if (!of_device_is_compatible(vty, "IBM,iSeries-vty")) continue; if (num_found == 0) diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c index 94a542e20efb..79711aa4b41d 100644 --- a/drivers/char/hvc_vio.c +++ b/drivers/char/hvc_vio.c @@ -157,7 +157,7 @@ static int hvc_find_vtys(void) if (!vtermno) continue; - if (device_is_compatible(vty, "hvterm1")) { + if (of_device_is_compatible(vty, "hvterm1")) { hvc_instantiate(*vtermno, num_found, &hvc_get_put_ops); ++num_found; } diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index cc1046e6ee02..4ae9811d1a6c 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -24,10 +24,11 @@ * warranty of any kind, whether express or implied. */ -#include <linux/module.h> +#include <linux/hw_random.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/pci.h> -#include <linux/hw_random.h> +#include <linux/stop_machine.h> #include <asm/io.h> @@ -217,30 +218,117 @@ static struct hwrng intel_rng = { .data_read = intel_rng_data_read, }; +struct intel_rng_hw { + struct pci_dev *dev; + void __iomem *mem; + u8 bios_cntl_off; + u8 bios_cntl_val; + u8 fwh_dec_en1_off; + u8 fwh_dec_en1_val; +}; -#ifdef CONFIG_SMP -static char __initdata waitflag; +static int __init intel_rng_hw_init(void *_intel_rng_hw) +{ + struct intel_rng_hw *intel_rng_hw = _intel_rng_hw; + u8 mfc, dvc; + + /* interrupts disabled in stop_machine_run call */ + + if (!(intel_rng_hw->fwh_dec_en1_val & FWH_F8_EN_MASK)) + pci_write_config_byte(intel_rng_hw->dev, + intel_rng_hw->fwh_dec_en1_off, + intel_rng_hw->fwh_dec_en1_val | + FWH_F8_EN_MASK); + if (!(intel_rng_hw->bios_cntl_val & BIOS_CNTL_WRITE_ENABLE_MASK)) + pci_write_config_byte(intel_rng_hw->dev, + intel_rng_hw->bios_cntl_off, + intel_rng_hw->bios_cntl_val | + BIOS_CNTL_WRITE_ENABLE_MASK); + + writeb(INTEL_FWH_RESET_CMD, intel_rng_hw->mem); + writeb(INTEL_FWH_READ_ID_CMD, intel_rng_hw->mem); + mfc = readb(intel_rng_hw->mem + INTEL_FWH_MANUFACTURER_CODE_ADDRESS); + dvc = readb(intel_rng_hw->mem + INTEL_FWH_DEVICE_CODE_ADDRESS); + writeb(INTEL_FWH_RESET_CMD, intel_rng_hw->mem); + + if (!(intel_rng_hw->bios_cntl_val & + (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK))) + pci_write_config_byte(intel_rng_hw->dev, + intel_rng_hw->bios_cntl_off, + intel_rng_hw->bios_cntl_val); + if (!(intel_rng_hw->fwh_dec_en1_val & FWH_F8_EN_MASK)) + pci_write_config_byte(intel_rng_hw->dev, + intel_rng_hw->fwh_dec_en1_off, + intel_rng_hw->fwh_dec_en1_val); -static void __init intel_init_wait(void *unused) + if (mfc != INTEL_FWH_MANUFACTURER_CODE || + (dvc != INTEL_FWH_DEVICE_CODE_8M && + dvc != INTEL_FWH_DEVICE_CODE_4M)) { + printk(KERN_ERR PFX "FWH not detected\n"); + return -ENODEV; + } + + return 0; +} + +static int __init intel_init_hw_struct(struct intel_rng_hw *intel_rng_hw, + struct pci_dev *dev) { - while (waitflag) - cpu_relax(); + intel_rng_hw->bios_cntl_val = 0xff; + intel_rng_hw->fwh_dec_en1_val = 0xff; + intel_rng_hw->dev = dev; + + /* Check for Intel 82802 */ + if (dev->device < 0x2640) { + intel_rng_hw->fwh_dec_en1_off = FWH_DEC_EN1_REG_OLD; + intel_rng_hw->bios_cntl_off = BIOS_CNTL_REG_OLD; + } else { + intel_rng_hw->fwh_dec_en1_off = FWH_DEC_EN1_REG_NEW; + intel_rng_hw->bios_cntl_off = BIOS_CNTL_REG_NEW; + } + + pci_read_config_byte(dev, intel_rng_hw->fwh_dec_en1_off, + &intel_rng_hw->fwh_dec_en1_val); + pci_read_config_byte(dev, intel_rng_hw->bios_cntl_off, + &intel_rng_hw->bios_cntl_val); + + if ((intel_rng_hw->bios_cntl_val & + (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK)) + == BIOS_CNTL_LOCK_ENABLE_MASK) { + static __initdata /*const*/ char warning[] = + KERN_WARNING PFX "Firmware space is locked read-only. " + KERN_WARNING PFX "If you can't or\n don't want to " + KERN_WARNING PFX "disable this in firmware setup, and " + KERN_WARNING PFX "if\n you are certain that your " + KERN_WARNING PFX "system has a functional\n RNG, try" + KERN_WARNING PFX "using the 'no_fwh_detect' option.\n"; + + if (no_fwh_detect) + return -ENODEV; + printk(warning); + return -EBUSY; + } + + intel_rng_hw->mem = ioremap_nocache(INTEL_FWH_ADDR, INTEL_FWH_ADDR_LEN); + if (intel_rng_hw->mem == NULL) + return -EBUSY; + + return 0; } -#endif + static int __init mod_init(void) { int err = -ENODEV; - unsigned i; + int i; struct pci_dev *dev = NULL; - void __iomem *mem; - unsigned long flags; - u8 bios_cntl_off, fwh_dec_en1_off; - u8 bios_cntl_val = 0xff, fwh_dec_en1_val = 0xff; - u8 hw_status, mfc, dvc; + void __iomem *mem = mem; + u8 hw_status; + struct intel_rng_hw *intel_rng_hw; for (i = 0; !dev && pci_tbl[i].vendor; ++i) - dev = pci_get_device(pci_tbl[i].vendor, pci_tbl[i].device, NULL); + dev = pci_get_device(pci_tbl[i].vendor, pci_tbl[i].device, + NULL); if (!dev) goto out; /* Device not found. */ @@ -250,39 +338,18 @@ static int __init mod_init(void) goto fwh_done; } - /* Check for Intel 82802 */ - if (dev->device < 0x2640) { - fwh_dec_en1_off = FWH_DEC_EN1_REG_OLD; - bios_cntl_off = BIOS_CNTL_REG_OLD; - } else { - fwh_dec_en1_off = FWH_DEC_EN1_REG_NEW; - bios_cntl_off = BIOS_CNTL_REG_NEW; - } - - pci_read_config_byte(dev, fwh_dec_en1_off, &fwh_dec_en1_val); - pci_read_config_byte(dev, bios_cntl_off, &bios_cntl_val); - - if ((bios_cntl_val & - (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK)) - == BIOS_CNTL_LOCK_ENABLE_MASK) { - static __initdata /*const*/ char warning[] = - KERN_WARNING PFX "Firmware space is locked read-only. If you can't or\n" - KERN_WARNING PFX "don't want to disable this in firmware setup, and if\n" - KERN_WARNING PFX "you are certain that your system has a functional\n" - KERN_WARNING PFX "RNG, try using the 'no_fwh_detect' option.\n"; - + intel_rng_hw = kmalloc(sizeof(*intel_rng_hw), GFP_KERNEL); + if (!intel_rng_hw) { pci_dev_put(dev); - if (no_fwh_detect) - goto fwh_done; - printk(warning); - err = -EBUSY; goto out; } - mem = ioremap_nocache(INTEL_FWH_ADDR, INTEL_FWH_ADDR_LEN); - if (mem == NULL) { + err = intel_init_hw_struct(intel_rng_hw, dev); + if (err) { pci_dev_put(dev); - err = -EBUSY; + kfree(intel_rng_hw); + if (err == -ENODEV) + goto fwh_done; goto out; } @@ -290,59 +357,18 @@ static int __init mod_init(void) * Since the BIOS code/data is going to disappear from its normal * location with the Read ID command, all activity on the system * must be stopped until the state is back to normal. + * + * Use stop_machine_run because IPIs can be blocked by disabling + * interrupts. */ -#ifdef CONFIG_SMP - set_mb(waitflag, 1); - if (smp_call_function(intel_init_wait, NULL, 1, 0) != 0) { - set_mb(waitflag, 0); - pci_dev_put(dev); - printk(KERN_ERR PFX "cannot run on all processors\n"); - err = -EAGAIN; - goto err_unmap; - } -#endif - local_irq_save(flags); - - if (!(fwh_dec_en1_val & FWH_F8_EN_MASK)) - pci_write_config_byte(dev, - fwh_dec_en1_off, - fwh_dec_en1_val | FWH_F8_EN_MASK); - if (!(bios_cntl_val & BIOS_CNTL_WRITE_ENABLE_MASK)) - pci_write_config_byte(dev, - bios_cntl_off, - bios_cntl_val | BIOS_CNTL_WRITE_ENABLE_MASK); - - writeb(INTEL_FWH_RESET_CMD, mem); - writeb(INTEL_FWH_READ_ID_CMD, mem); - mfc = readb(mem + INTEL_FWH_MANUFACTURER_CODE_ADDRESS); - dvc = readb(mem + INTEL_FWH_DEVICE_CODE_ADDRESS); - writeb(INTEL_FWH_RESET_CMD, mem); - - if (!(bios_cntl_val & - (BIOS_CNTL_LOCK_ENABLE_MASK|BIOS_CNTL_WRITE_ENABLE_MASK))) - pci_write_config_byte(dev, bios_cntl_off, bios_cntl_val); - if (!(fwh_dec_en1_val & FWH_F8_EN_MASK)) - pci_write_config_byte(dev, fwh_dec_en1_off, fwh_dec_en1_val); - - local_irq_restore(flags); -#ifdef CONFIG_SMP - /* Tell other CPUs to resume. */ - set_mb(waitflag, 0); -#endif - - iounmap(mem); + err = stop_machine_run(intel_rng_hw_init, intel_rng_hw, NR_CPUS); pci_dev_put(dev); - - if (mfc != INTEL_FWH_MANUFACTURER_CODE || - (dvc != INTEL_FWH_DEVICE_CODE_8M && - dvc != INTEL_FWH_DEVICE_CODE_4M)) { - printk(KERN_ERR PFX "FWH not detected\n"); - err = -ENODEV; + iounmap(intel_rng_hw->mem); + kfree(intel_rng_hw); + if (err) goto out; - } fwh_done: - err = -ENOMEM; mem = ioremap(INTEL_RNG_ADDR, INTEL_RNG_ADDR_LEN); if (!mem) @@ -352,22 +378,21 @@ fwh_done: /* Check for Random Number Generator */ err = -ENODEV; hw_status = hwstatus_get(mem); - if ((hw_status & INTEL_RNG_PRESENT) == 0) - goto err_unmap; + if ((hw_status & INTEL_RNG_PRESENT) == 0) { + iounmap(mem); + goto out; + } printk(KERN_INFO "Intel 82802 RNG detected\n"); err = hwrng_register(&intel_rng); if (err) { printk(KERN_ERR PFX "RNG registering failed (%d)\n", err); - goto err_unmap; + iounmap(mem); } out: return err; -err_unmap: - iounmap(mem); - goto out; } static void __exit mod_exit(void) diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c index 353d9f3cf8d7..0289705967de 100644 --- a/drivers/char/i8k.c +++ b/drivers/char/i8k.c @@ -22,6 +22,7 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/dmi.h> +#include <linux/capability.h> #include <asm/uaccess.h> #include <asm/io.h> diff --git a/drivers/char/ip27-rtc.c b/drivers/char/ip27-rtc.c index a48da02aad2f..932264a657d0 100644 --- a/drivers/char/ip27-rtc.c +++ b/drivers/char/ip27-rtc.c @@ -35,7 +35,6 @@ #include <linux/init.h> #include <linux/poll.h> #include <linux/proc_fs.h> -#include <linux/smp_lock.h> #include <asm/m48t35.h> #include <asm/sn/ioc3.h> diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index e22146546add..6c5d15de3317 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -9,6 +9,7 @@ * source@mvista.com * * Copyright 2002 MontaVista Software Inc. + * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -64,6 +65,11 @@ #include <linux/string.h> #include <linux/ctype.h> +#ifdef CONFIG_PPC_OF +#include <asm/of_device.h> +#include <asm/of_platform.h> +#endif + #define PFX "ipmi_si: " /* Measure times between events in the driver. */ @@ -76,6 +82,12 @@ #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a short timeout */ +/* Bit for BMC global enables. */ +#define IPMI_BMC_RCV_MSG_INTR 0x01 +#define IPMI_BMC_EVT_MSG_INTR 0x02 +#define IPMI_BMC_EVT_MSG_BUFF 0x04 +#define IPMI_BMC_SYS_LOG 0x08 + enum si_intf_state { SI_NORMAL, SI_GETTING_FLAGS, @@ -84,7 +96,9 @@ enum si_intf_state { SI_CLEARING_FLAGS_THEN_SET_IRQ, SI_GETTING_MESSAGES, SI_ENABLE_INTERRUPTS1, - SI_ENABLE_INTERRUPTS2 + SI_ENABLE_INTERRUPTS2, + SI_DISABLE_INTERRUPTS1, + SI_DISABLE_INTERRUPTS2 /* FIXME - add watchdog stuff. */ }; @@ -333,6 +347,17 @@ static void start_enable_irq(struct smi_info *smi_info) smi_info->si_state = SI_ENABLE_INTERRUPTS1; } +static void start_disable_irq(struct smi_info *smi_info) +{ + unsigned char msg[2]; + + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; + + smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); + smi_info->si_state = SI_DISABLE_INTERRUPTS1; +} + static void start_clear_flags(struct smi_info *smi_info) { unsigned char msg[3]; @@ -353,7 +378,7 @@ static void start_clear_flags(struct smi_info *smi_info) static inline void disable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { - disable_irq_nosync(smi_info->irq); + start_disable_irq(smi_info); smi_info->interrupt_disabled = 1; } } @@ -361,7 +386,7 @@ static inline void disable_si_irq(struct smi_info *smi_info) static inline void enable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (smi_info->interrupt_disabled)) { - enable_irq(smi_info->irq); + start_enable_irq(smi_info); smi_info->interrupt_disabled = 0; } } @@ -583,7 +608,9 @@ static void handle_transaction_done(struct smi_info *smi_info) } else { msg[0] = (IPMI_NETFN_APP_REQUEST << 2); msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; - msg[2] = msg[3] | 1; /* enable msg queue int */ + msg[2] = (msg[3] | + IPMI_BMC_RCV_MSG_INTR | + IPMI_BMC_EVT_MSG_INTR); smi_info->handlers->start_transaction( smi_info->si_sm, msg, 3); smi_info->si_state = SI_ENABLE_INTERRUPTS2; @@ -605,6 +632,45 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->si_state = SI_NORMAL; break; } + + case SI_DISABLE_INTERRUPTS1: + { + unsigned char msg[4]; + + /* We got the flags from the SMI, now handle them. */ + smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) { + printk(KERN_WARNING + "ipmi_si: Could not disable interrupts" + ", failed get.\n"); + smi_info->si_state = SI_NORMAL; + } else { + msg[0] = (IPMI_NETFN_APP_REQUEST << 2); + msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD; + msg[2] = (msg[3] & + ~(IPMI_BMC_RCV_MSG_INTR | + IPMI_BMC_EVT_MSG_INTR)); + smi_info->handlers->start_transaction( + smi_info->si_sm, msg, 3); + smi_info->si_state = SI_DISABLE_INTERRUPTS2; + } + break; + } + + case SI_DISABLE_INTERRUPTS2: + { + unsigned char msg[4]; + + /* We got the flags from the SMI, now handle them. */ + smi_info->handlers->get_result(smi_info->si_sm, msg, 4); + if (msg[2] != 0) { + printk(KERN_WARNING + "ipmi_si: Could not disable interrupts" + ", failed set.\n"); + } + smi_info->si_state = SI_NORMAL; + break; + } } } @@ -858,9 +924,6 @@ static void smi_timeout(unsigned long data) struct timeval t; #endif - if (atomic_read(&smi_info->stop_operation)) - return; - spin_lock_irqsave(&(smi_info->si_lock), flags); #ifdef DEBUG_TIMING do_gettimeofday(&t); @@ -916,15 +979,11 @@ static irqreturn_t si_irq_handler(int irq, void *data) smi_info->interrupts++; spin_unlock(&smi_info->count_lock); - if (atomic_read(&smi_info->stop_operation)) - goto out; - #ifdef DEBUG_TIMING do_gettimeofday(&t); printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif smi_event_handler(smi_info, 0); - out: spin_unlock_irqrestore(&(smi_info->si_lock), flags); return IRQ_HANDLED; } @@ -1006,6 +1065,7 @@ static DEFINE_MUTEX(smi_infos_lock); static int smi_num; /* Used to sequence the SMIs */ #define DEFAULT_REGSPACING 1 +#define DEFAULT_REGSIZE 1 static int si_trydefaults = 1; static char *si_type[SI_MAX_PARMS]; @@ -1111,7 +1171,7 @@ static int std_irq_setup(struct smi_info *info) if (info->si_type == SI_BT) { rv = request_irq(info->irq, si_bt_irq_handler, - IRQF_DISABLED, + IRQF_SHARED | IRQF_DISABLED, DEVICE_NAME, info); if (!rv) @@ -1121,7 +1181,7 @@ static int std_irq_setup(struct smi_info *info) } else rv = request_irq(info->irq, si_irq_handler, - IRQF_DISABLED, + IRQF_SHARED | IRQF_DISABLED, DEVICE_NAME, info); if (rv) { @@ -1701,15 +1761,11 @@ static u32 ipmi_acpi_gpe(void *context) smi_info->interrupts++; spin_unlock(&smi_info->count_lock); - if (atomic_read(&smi_info->stop_operation)) - goto out; - #ifdef DEBUG_TIMING do_gettimeofday(&t); printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif smi_event_handler(smi_info, 0); - out: spin_unlock_irqrestore(&(smi_info->si_lock), flags); return ACPI_INTERRUPT_HANDLED; @@ -2133,12 +2189,15 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev, info->irq_setup = std_irq_setup; info->dev = &pdev->dev; + pci_set_drvdata(pdev, info); return try_smi_init(info); } static void __devexit ipmi_pci_remove(struct pci_dev *pdev) { + struct smi_info *info = pci_get_drvdata(pdev); + cleanup_one_si(info); } #ifdef CONFIG_PM @@ -2172,6 +2231,99 @@ static struct pci_driver ipmi_pci_driver = { #endif /* CONFIG_PCI */ +#ifdef CONFIG_PPC_OF +static int __devinit ipmi_of_probe(struct of_device *dev, + const struct of_device_id *match) +{ + struct smi_info *info; + struct resource resource; + const int *regsize, *regspacing, *regshift; + struct device_node *np = dev->node; + int ret; + int proplen; + + dev_info(&dev->dev, PFX "probing via device tree\n"); + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_warn(&dev->dev, PFX "invalid address from OF\n"); + return ret; + } + + regsize = get_property(np, "reg-size", &proplen); + if (regsize && proplen != 4) { + dev_warn(&dev->dev, PFX "invalid regsize from OF\n"); + return -EINVAL; + } + + regspacing = get_property(np, "reg-spacing", &proplen); + if (regspacing && proplen != 4) { + dev_warn(&dev->dev, PFX "invalid regspacing from OF\n"); + return -EINVAL; + } + + regshift = get_property(np, "reg-shift", &proplen); + if (regshift && proplen != 4) { + dev_warn(&dev->dev, PFX "invalid regshift from OF\n"); + return -EINVAL; + } + + info = kzalloc(sizeof(*info), GFP_KERNEL); + + if (!info) { + dev_err(&dev->dev, + PFX "could not allocate memory for OF probe\n"); + return -ENOMEM; + } + + info->si_type = (enum si_type) match->data; + info->addr_source = "device-tree"; + info->io_setup = mem_setup; + info->irq_setup = std_irq_setup; + + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + info->io.addr_data = resource.start; + + info->io.regsize = regsize ? *regsize : DEFAULT_REGSIZE; + info->io.regspacing = regspacing ? *regspacing : DEFAULT_REGSPACING; + info->io.regshift = regshift ? *regshift : 0; + + info->irq = irq_of_parse_and_map(dev->node, 0); + info->dev = &dev->dev; + + dev_dbg(&dev->dev, "addr 0x%lx regsize %ld spacing %ld irq %x\n", + info->io.addr_data, info->io.regsize, info->io.regspacing, + info->irq); + + dev->dev.driver_data = (void*) info; + + return try_smi_init(info); +} + +static int __devexit ipmi_of_remove(struct of_device *dev) +{ + cleanup_one_si(dev->dev.driver_data); + return 0; +} + +static struct of_device_id ipmi_match[] = +{ + { .type = "ipmi", .compatible = "ipmi-kcs", .data = (void *)(unsigned long) SI_KCS }, + { .type = "ipmi", .compatible = "ipmi-smic", .data = (void *)(unsigned long) SI_SMIC }, + { .type = "ipmi", .compatible = "ipmi-bt", .data = (void *)(unsigned long) SI_BT }, + {}, +}; + +static struct of_platform_driver ipmi_of_platform_driver = +{ + .name = "ipmi", + .match_table = ipmi_match, + .probe = ipmi_of_probe, + .remove = __devexit_p(ipmi_of_remove), +}; +#endif /* CONFIG_PPC_OF */ + + static int try_get_dev_id(struct smi_info *smi_info) { unsigned char msg[2]; @@ -2801,6 +2953,10 @@ static __devinit int init_ipmi_si(void) } #endif +#ifdef CONFIG_PPC_OF + of_register_platform_driver(&ipmi_of_platform_driver); +#endif + if (si_trydefaults) { mutex_lock(&smi_infos_lock); if (list_empty(&smi_infos)) { @@ -2838,28 +2994,33 @@ static void cleanup_one_si(struct smi_info *to_clean) list_del(&to_clean->link); - /* Tell the timer and interrupt handlers that we are shutting - down. */ - spin_lock_irqsave(&(to_clean->si_lock), flags); - spin_lock(&(to_clean->msg_lock)); - + /* Tell the driver that we are shutting down. */ atomic_inc(&to_clean->stop_operation); - if (to_clean->irq_cleanup) - to_clean->irq_cleanup(to_clean); - - spin_unlock(&(to_clean->msg_lock)); - spin_unlock_irqrestore(&(to_clean->si_lock), flags); - - /* Wait until we know that we are out of any interrupt - handlers might have been running before we freed the - interrupt. */ - synchronize_sched(); - + /* Make sure the timer and thread are stopped and will not run + again. */ wait_for_timer_and_thread(to_clean); - /* Interrupts and timeouts are stopped, now make sure the - interface is in a clean state. */ + /* Timeouts are stopped, now make sure the interrupts are off + for the device. A little tricky with locks to make sure + there are no races. */ + spin_lock_irqsave(&to_clean->si_lock, flags); + while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { + spin_unlock_irqrestore(&to_clean->si_lock, flags); + poll(to_clean); + schedule_timeout_uninterruptible(1); + spin_lock_irqsave(&to_clean->si_lock, flags); + } + disable_si_irq(to_clean); + spin_unlock_irqrestore(&to_clean->si_lock, flags); + while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { + poll(to_clean); + schedule_timeout_uninterruptible(1); + } + + /* Clean up interrupts and make sure that everything is done. */ + if (to_clean->irq_cleanup) + to_clean->irq_cleanup(to_clean); while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { poll(to_clean); schedule_timeout_uninterruptible(1); @@ -2898,6 +3059,10 @@ static __exit void cleanup_ipmi_si(void) pci_unregister_driver(&ipmi_pci_driver); #endif +#ifdef CONFIG_PPC_OF + of_unregister_platform_driver(&ipmi_of_platform_driver); +#endif + mutex_lock(&smi_infos_lock); list_for_each_entry_safe(e, tmp_e, &smi_infos, link) cleanup_one_si(e); diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index 6b634e8d9519..147c12047cf3 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -39,6 +39,7 @@ #include <linux/miscdevice.h> #include <linux/init.h> #include <linux/completion.h> +#include <linux/kdebug.h> #include <linux/rwsem.h> #include <linux/errno.h> #include <asm/uaccess.h> @@ -49,9 +50,18 @@ #include <linux/poll.h> #include <linux/string.h> #include <linux/ctype.h> +#include <linux/delay.h> #include <asm/atomic.h> -#ifdef CONFIG_X86_LOCAL_APIC -#include <asm/apic.h> + +#ifdef CONFIG_X86 +/* This is ugly, but I've determined that x86 is the only architecture + that can reasonably support the IPMI NMI watchdog timeout at this + time. If another architecture adds this capability somehow, it + will have to be a somewhat different mechanism and I have no idea + how it will work. So in the unlikely event that another + architecture supports this, we can figure out a good generic + mechanism for it at that time. */ +#define HAVE_DIE_NMI_POST #endif #define PFX "IPMI Watchdog: " @@ -317,6 +327,11 @@ static unsigned char ipmi_version_minor; /* If a pretimeout occurs, this is used to allow only one panic to happen. */ static atomic_t preop_panic_excl = ATOMIC_INIT(-1); +#ifdef HAVE_DIE_NMI_POST +static int testing_nmi; +static int nmi_handler_registered; +#endif + static int ipmi_heartbeat(void); static void panic_halt_ipmi_heartbeat(void); @@ -358,6 +373,10 @@ static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg, int hbnow = 0; + /* These can be cleared as we are setting the timeout. */ + ipmi_start_timer_on_heartbeat = 0; + pretimeout_since_last_heartbeat = 0; + data[0] = 0; WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS); @@ -432,13 +451,12 @@ static int ipmi_set_timeout(int do_heartbeat) wait_for_completion(&set_timeout_wait); + mutex_unlock(&set_timeout_lock); + if ((do_heartbeat == IPMI_SET_TIMEOUT_FORCE_HB) || ((send_heartbeat_now) && (do_heartbeat == IPMI_SET_TIMEOUT_HB_IF_NECESSARY))) - { rv = ipmi_heartbeat(); - } - mutex_unlock(&set_timeout_lock); out: return rv; @@ -518,12 +536,10 @@ static int ipmi_heartbeat(void) int rv; struct ipmi_system_interface_addr addr; - if (ipmi_ignore_heartbeat) { + if (ipmi_ignore_heartbeat) return 0; - } if (ipmi_start_timer_on_heartbeat) { - ipmi_start_timer_on_heartbeat = 0; ipmi_watchdog_state = action_val; return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); } else if (pretimeout_since_last_heartbeat) { @@ -531,7 +547,6 @@ static int ipmi_heartbeat(void) We don't want to set the action, though, we want to leave that alone (thus it can't be combined with the above operation. */ - pretimeout_since_last_heartbeat = 0; return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); } @@ -919,6 +934,45 @@ static void ipmi_register_watchdog(int ipmi_intf) printk(KERN_CRIT PFX "Unable to register misc device\n"); } +#ifdef HAVE_DIE_NMI_POST + if (nmi_handler_registered) { + int old_pretimeout = pretimeout; + int old_timeout = timeout; + int old_preop_val = preop_val; + + /* Set the pretimeout to go off in a second and give + ourselves plenty of time to stop the timer. */ + ipmi_watchdog_state = WDOG_TIMEOUT_RESET; + preop_val = WDOG_PREOP_NONE; /* Make sure nothing happens */ + pretimeout = 99; + timeout = 100; + + testing_nmi = 1; + + rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); + if (rv) { + printk(KERN_WARNING PFX "Error starting timer to" + " test NMI: 0x%x. The NMI pretimeout will" + " likely not work\n", rv); + rv = 0; + goto out_restore; + } + + msleep(1500); + + if (testing_nmi != 2) { + printk(KERN_WARNING PFX "IPMI NMI didn't seem to" + " occur. The NMI pretimeout will" + " likely not work\n"); + } + out_restore: + testing_nmi = 0; + preop_val = old_preop_val; + pretimeout = old_pretimeout; + timeout = old_timeout; + } +#endif + out: up_write(®ister_sem); @@ -928,6 +982,10 @@ static void ipmi_register_watchdog(int ipmi_intf) ipmi_watchdog_state = action_val; ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); printk(KERN_INFO PFX "Starting now!\n"); + } else { + /* Stop the timer now. */ + ipmi_watchdog_state = WDOG_TIMEOUT_NONE; + ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); } } @@ -964,17 +1022,28 @@ static void ipmi_unregister_watchdog(int ipmi_intf) up_write(®ister_sem); } -#ifdef HAVE_NMI_HANDLER +#ifdef HAVE_DIE_NMI_POST static int -ipmi_nmi(void *dev_id, int cpu, int handled) +ipmi_nmi(struct notifier_block *self, unsigned long val, void *data) { + if (val != DIE_NMI_POST) + return NOTIFY_OK; + + if (testing_nmi) { + testing_nmi = 2; + return NOTIFY_STOP; + } + /* If we are not expecting a timeout, ignore it. */ if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) - return NOTIFY_DONE; + return NOTIFY_OK; + + if (preaction_val != WDOG_PRETIMEOUT_NMI) + return NOTIFY_OK; /* If no one else handled the NMI, we assume it was the IPMI watchdog. */ - if ((!handled) && (preop_val == WDOG_PREOP_PANIC)) { + if (preop_val == WDOG_PREOP_PANIC) { /* On some machines, the heartbeat will give an error and not work unless we re-enable the timer. So do so. */ @@ -983,18 +1052,12 @@ ipmi_nmi(void *dev_id, int cpu, int handled) panic(PFX "pre-timeout"); } - return NOTIFY_DONE; + return NOTIFY_STOP; } -static struct nmi_handler ipmi_nmi_handler = -{ - .link = LIST_HEAD_INIT(ipmi_nmi_handler.link), - .dev_name = "ipmi_watchdog", - .dev_id = NULL, - .handler = ipmi_nmi, - .priority = 0, /* Call us last. */ +static struct notifier_block ipmi_nmi_handler = { + .notifier_call = ipmi_nmi }; -int nmi_handler_registered; #endif static int wdog_reboot_handler(struct notifier_block *this, @@ -1111,7 +1174,7 @@ static int preaction_op(const char *inval, char *outval) preaction_val = WDOG_PRETIMEOUT_NONE; else if (strcmp(inval, "pre_smi") == 0) preaction_val = WDOG_PRETIMEOUT_SMI; -#ifdef HAVE_NMI_HANDLER +#ifdef HAVE_DIE_NMI_POST else if (strcmp(inval, "pre_nmi") == 0) preaction_val = WDOG_PRETIMEOUT_NMI; #endif @@ -1145,7 +1208,7 @@ static int preop_op(const char *inval, char *outval) static void check_parms(void) { -#ifdef HAVE_NMI_HANDLER +#ifdef HAVE_DIE_NMI_POST int do_nmi = 0; int rv; @@ -1158,20 +1221,9 @@ static void check_parms(void) preop_op("preop_none", NULL); do_nmi = 0; } -#ifdef CONFIG_X86_LOCAL_APIC - if (nmi_watchdog == NMI_IO_APIC) { - printk(KERN_WARNING PFX "nmi_watchdog is set to IO APIC" - " mode (value is %d), that is incompatible" - " with using NMI in the IPMI watchdog." - " Disabling IPMI nmi pretimeout.\n", - nmi_watchdog); - preaction_val = WDOG_PRETIMEOUT_NONE; - do_nmi = 0; - } -#endif } if (do_nmi && !nmi_handler_registered) { - rv = request_nmi(&ipmi_nmi_handler); + rv = register_die_notifier(&ipmi_nmi_handler); if (rv) { printk(KERN_WARNING PFX "Can't register nmi handler\n"); @@ -1179,7 +1231,7 @@ static void check_parms(void) } else nmi_handler_registered = 1; } else if (!do_nmi && nmi_handler_registered) { - release_nmi(&ipmi_nmi_handler); + unregister_die_notifier(&ipmi_nmi_handler); nmi_handler_registered = 0; } #endif @@ -1215,9 +1267,9 @@ static int __init ipmi_wdog_init(void) rv = ipmi_smi_watcher_register(&smi_watcher); if (rv) { -#ifdef HAVE_NMI_HANDLER - if (preaction_val == WDOG_PRETIMEOUT_NMI) - release_nmi(&ipmi_nmi_handler); +#ifdef HAVE_DIE_NMI_POST + if (nmi_handler_registered) + unregister_die_notifier(&ipmi_nmi_handler); #endif atomic_notifier_chain_unregister(&panic_notifier_list, &wdog_panic_notifier); @@ -1236,9 +1288,9 @@ static void __exit ipmi_wdog_exit(void) ipmi_smi_watcher_unregister(&smi_watcher); ipmi_unregister_watchdog(watchdog_ifnum); -#ifdef HAVE_NMI_HANDLER +#ifdef HAVE_DIE_NMI_POST if (nmi_handler_registered) - release_nmi(&ipmi_nmi_handler); + unregister_die_notifier(&ipmi_nmi_handler); #endif atomic_notifier_chain_unregister(&panic_notifier_list, diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 43ab9edc76f5..761f77740d67 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -137,11 +137,10 @@ #define InterruptTheCard(base) outw(0, (base) + 0xc) #define ClearInterrupt(base) inw((base) + 0x0a) +#define pr_dbg(str...) pr_debug("ISICOM: " str) #ifdef DEBUG -#define pr_dbg(str...) printk(KERN_DEBUG "ISICOM: " str) #define isicom_paranoia_check(a, b, c) __isicom_paranoia_check((a), (b), (c)) #else -#define pr_dbg(str...) do { } while (0) #define isicom_paranoia_check(a, b, c) 0 #endif diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index c06e86ad1dab..1b094509b1d2 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -109,7 +109,7 @@ struct kbd_struct kbd_table[MAX_NR_CONSOLES]; static struct kbd_struct *kbd = kbd_table; struct vt_spawn_console vt_spawn_con = { - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(vt_spawn_con.lock), .pid = NULL, .sig = 0, }; diff --git a/drivers/char/lp.c b/drivers/char/lp.c index b51d08be0bcf..62051f8b0910 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -118,7 +118,6 @@ #include <linux/kernel.h> #include <linux/major.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/slab.h> #include <linux/fcntl.h> #include <linux/delay.h> @@ -139,9 +138,6 @@ /* if you have more than 8 printers, remember to increase LP_NO */ #define LP_NO 8 -/* ROUND_UP macro from fs/select.c */ -#define ROUND_UP(x,y) (((x)+(y)-1)/(y)) - static struct lp_struct lp_table[LP_NO]; static unsigned int lp_count = 0; @@ -652,7 +648,7 @@ static int lp_ioctl(struct inode *inode, struct file *file, (par_timeout.tv_usec < 0)) { return -EINVAL; } - to_jiffies = ROUND_UP(par_timeout.tv_usec, 1000000/HZ); + to_jiffies = DIV_ROUND_UP(par_timeout.tv_usec, 1000000/HZ); to_jiffies += par_timeout.tv_sec * (long) HZ; if (to_jiffies <= 0) { return -EINVAL; @@ -803,7 +799,7 @@ static int lp_register(int nr, struct parport *port) if (reset) lp_reset(nr); - class_device_create(lp_class, NULL, MKDEV(LP_MAJOR, nr), NULL, + class_device_create(lp_class, NULL, MKDEV(LP_MAJOR, nr), port->dev, "lp%d", nr); printk(KERN_INFO "lp%d: using %s (%s).\n", nr, port->name, diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 5f066963f171..cc9a9d0df979 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -18,7 +18,6 @@ #include <linux/raw.h> #include <linux/tty.h> #include <linux/capability.h> -#include <linux/smp_lock.h> #include <linux/ptrace.h> #include <linux/device.h> #include <linux/highmem.h> @@ -552,7 +551,7 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, return virtr + wrote; } -#if (defined(CONFIG_ISA) || defined(CONFIG_PCI)) && !defined(__mc68000__) +#ifdef CONFIG_DEVPORT static ssize_t read_port(struct file * file, char __user * buf, size_t count, loff_t *ppos) { @@ -835,7 +834,7 @@ static const struct file_operations null_fops = { .splice_write = splice_write_null, }; -#if (defined(CONFIG_ISA) || defined(CONFIG_PCI)) && !defined(__mc68000__) +#ifdef CONFIG_DEVPORT static const struct file_operations port_fops = { .llseek = memory_lseek, .read = read_port, @@ -913,7 +912,7 @@ static int memory_open(struct inode * inode, struct file * filp) case 3: filp->f_op = &null_fops; break; -#if (defined(CONFIG_ISA) || defined(CONFIG_PCI)) && !defined(__mc68000__) +#ifdef CONFIG_DEVPORT case 4: filp->f_op = &port_fops; break; @@ -960,7 +959,7 @@ static const struct { {1, "mem", S_IRUSR | S_IWUSR | S_IRGRP, &mem_fops}, {2, "kmem", S_IRUSR | S_IWUSR | S_IRGRP, &kmem_fops}, {3, "null", S_IRUGO | S_IWUGO, &null_fops}, -#if (defined(CONFIG_ISA) || defined(CONFIG_PCI)) && !defined(__mc68000__) +#ifdef CONFIG_DEVPORT {4, "port", S_IRUSR | S_IWUSR | S_IRGRP, &port_fops}, #endif {5, "zero", S_IRUGO | S_IWUGO, &zero_fops}, diff --git a/drivers/char/misc.c b/drivers/char/misc.c index 7e975f606924..4e6fb9651a16 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -41,6 +41,7 @@ #include <linux/kernel.h> #include <linux/major.h> #include <linux/slab.h> +#include <linux/mutex.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/stat.h> @@ -53,7 +54,7 @@ * Head entry for the doubly linked miscdevice list */ static LIST_HEAD(misc_list); -static DECLARE_MUTEX(misc_sem); +static DEFINE_MUTEX(misc_mtx); /* * Assigned numbers, used for dynamic minors @@ -69,7 +70,7 @@ static void *misc_seq_start(struct seq_file *seq, loff_t *pos) struct miscdevice *p; loff_t off = 0; - down(&misc_sem); + mutex_lock(&misc_mtx); list_for_each_entry(p, &misc_list, list) { if (*pos == off++) return p; @@ -89,7 +90,7 @@ static void *misc_seq_next(struct seq_file *seq, void *v, loff_t *pos) static void misc_seq_stop(struct seq_file *seq, void *v) { - up(&misc_sem); + mutex_unlock(&misc_mtx); } static int misc_seq_show(struct seq_file *seq, void *v) @@ -129,7 +130,7 @@ static int misc_open(struct inode * inode, struct file * file) int err = -ENODEV; const struct file_operations *old_fops, *new_fops = NULL; - down(&misc_sem); + mutex_lock(&misc_mtx); list_for_each_entry(c, &misc_list, list) { if (c->minor == minor) { @@ -139,9 +140,9 @@ static int misc_open(struct inode * inode, struct file * file) } if (!new_fops) { - up(&misc_sem); + mutex_unlock(&misc_mtx); request_module("char-major-%d-%d", MISC_MAJOR, minor); - down(&misc_sem); + mutex_lock(&misc_mtx); list_for_each_entry(c, &misc_list, list) { if (c->minor == minor) { @@ -165,7 +166,7 @@ static int misc_open(struct inode * inode, struct file * file) } fops_put(old_fops); fail: - up(&misc_sem); + mutex_unlock(&misc_mtx); return err; } @@ -201,10 +202,10 @@ int misc_register(struct miscdevice * misc) INIT_LIST_HEAD(&misc->list); - down(&misc_sem); + mutex_lock(&misc_mtx); list_for_each_entry(c, &misc_list, list) { if (c->minor == misc->minor) { - up(&misc_sem); + mutex_unlock(&misc_mtx); return -EBUSY; } } @@ -215,7 +216,7 @@ int misc_register(struct miscdevice * misc) if ( (misc_minors[i>>3] & (1 << (i&7))) == 0) break; if (i<0) { - up(&misc_sem); + mutex_unlock(&misc_mtx); return -EBUSY; } misc->minor = i; @@ -238,7 +239,7 @@ int misc_register(struct miscdevice * misc) */ list_add(&misc->list, &misc_list); out: - up(&misc_sem); + mutex_unlock(&misc_mtx); return err; } @@ -259,13 +260,13 @@ int misc_deregister(struct miscdevice * misc) if (list_empty(&misc->list)) return -EINVAL; - down(&misc_sem); + mutex_lock(&misc_mtx); list_del(&misc->list); device_destroy(misc_class, MKDEV(MISC_MAJOR, misc->minor)); if (i < DYNAMIC_MINORS && i>0) { misc_minors[i>>3] &= ~(1 << (misc->minor & 7)); } - up(&misc_sem); + mutex_unlock(&misc_mtx); return 0; } diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 7dbaee8d9402..e0d35c20c04f 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -1582,7 +1582,7 @@ copy: if(copy_from_user(&dltmp, argp, sizeof(struct dl_str))) return -EFAULT; - if(dltmp.cardno < 0 || dltmp.cardno >= MAX_BOARDS) + if(dltmp.cardno < 0 || dltmp.cardno >= MAX_BOARDS || dltmp.len < 0) return -EINVAL; switch(cmd) @@ -2529,6 +2529,8 @@ static int moxaloadbios(int cardno, unsigned char __user *tmp, int len) void __iomem *baseAddr; int i; + if(len < 0 || len > sizeof(moxaBuff)) + return -EINVAL; if(copy_from_user(moxaBuff, tmp, len)) return -EFAULT; baseAddr = moxa_boards[cardno].basemem; @@ -2576,7 +2578,7 @@ static int moxaload320b(int cardno, unsigned char __user *tmp, int len) void __iomem *baseAddr; int i; - if(len > sizeof(moxaBuff)) + if(len < 0 || len > sizeof(moxaBuff)) return -EINVAL; if(copy_from_user(moxaBuff, tmp, len)) return -EFAULT; @@ -2596,6 +2598,8 @@ static int moxaloadcode(int cardno, unsigned char __user *tmp, int len) void __iomem *baseAddr, *ofsAddr; int retval, port, i; + if(len < 0 || len > sizeof(moxaBuff)) + return -EINVAL; if(copy_from_user(moxaBuff, tmp, len)) return -EFAULT; baseAddr = moxa_boards[cardno].basemem; diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 80a01150b86c..5953a45d7e96 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -54,7 +54,6 @@ #include <linux/gfp.h> #include <linux/ioport.h> #include <linux/mm.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <linux/pci.h> diff --git a/drivers/char/mxser_new.c b/drivers/char/mxser_new.c index f7603b6aeb87..6cde448cd5b2 100644 --- a/drivers/char/mxser_new.c +++ b/drivers/char/mxser_new.c @@ -37,7 +37,6 @@ #include <linux/gfp.h> #include <linux/ioport.h> #include <linux/mm.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <linux/pci.h> diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index 65f2d3a96b85..14557a4822c0 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -1088,13 +1088,13 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, /* block until there is a message: */ add_wait_queue(&pInfo->read_wait, &wait); repeat: - current->state = TASK_INTERRUPTIBLE; + __set_current_state(TASK_INTERRUPTIBLE); pMsg = remove_msg(pInfo, pClient); if (!pMsg && !signal_pending(current)) { schedule(); goto repeat; } - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&pInfo->read_wait, &wait); } diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index 4abd1eff61d6..84ac64fc48a1 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -66,7 +66,6 @@ #include <linux/poll.h> #include <linux/major.h> #include <linux/ppdev.h> -#include <linux/smp_lock.h> #include <linux/device.h> #include <asm/uaccess.h> @@ -752,7 +751,7 @@ static const struct file_operations pp_fops = { static void pp_attach(struct parport *port) { - device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number), + device_create(ppdev_class, port->dev, MKDEV(PP_MAJOR, port->number), "parport%d", port->number); } diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 70145254fb9d..3494e3fc44bf 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -980,7 +980,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, } schedule(); } - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&port->open_wait, &wait); if (!tty_hung_up_p(filp)) port->count++; diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c index 76357c855ce3..61a63da420c2 100644 --- a/drivers/char/rocket.c +++ b/drivers/char/rocket.c @@ -65,10 +65,6 @@ /****** Kernel includes ******/ -#ifdef MODVERSIONS -#include <config/modversions.h> -#endif - #include <linux/module.h> #include <linux/errno.h> #include <linux/major.h> @@ -85,6 +81,7 @@ #include <linux/string.h> #include <linux/fcntl.h> #include <linux/ptrace.h> +#include <linux/mutex.h> #include <linux/ioport.h> #include <linux/delay.h> #include <linux/wait.h> @@ -93,7 +90,6 @@ #include <asm/atomic.h> #include <linux/bitops.h> #include <linux/spinlock.h> -#include <asm/semaphore.h> #include <linux/init.h> /****** RocketPort includes ******/ @@ -702,7 +698,7 @@ static void init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev) } } spin_lock_init(&info->slock); - sema_init(&info->write_sem, 1); + mutex_init(&info->write_mtx); rp_table[line] = info; if (pci_dev) tty_register_device(rocket_driver, line, &pci_dev->dev); @@ -947,7 +943,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, #endif schedule(); /* Don't hold spinlock here, will hang PC */ } - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); spin_lock_irqsave(&info->slock, flags); @@ -1602,7 +1598,7 @@ static void rp_wait_until_sent(struct tty_struct *tty, int timeout) if (signal_pending(current)) break; } - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); #ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT printk(KERN_INFO "txcnt = %d (jiff=%lu)...done\n", txcnt, jiffies); #endif @@ -1661,8 +1657,11 @@ static void rp_put_char(struct tty_struct *tty, unsigned char ch) if (rocket_paranoia_check(info, "rp_put_char")) return; - /* Grab the port write semaphore, locking out other processes that try to write to this port */ - down(&info->write_sem); + /* + * Grab the port write mutex, locking out other processes that try to + * write to this port + */ + mutex_lock(&info->write_mtx); #ifdef ROCKET_DEBUG_WRITE printk(KERN_INFO "rp_put_char %c...", ch); @@ -1684,12 +1683,12 @@ static void rp_put_char(struct tty_struct *tty, unsigned char ch) info->xmit_fifo_room--; } spin_unlock_irqrestore(&info->slock, flags); - up(&info->write_sem); + mutex_unlock(&info->write_mtx); } /* * Exception handler - write routine, called when user app writes to the device. - * A per port write semaphore is used to protect from another process writing to + * A per port write mutex is used to protect from another process writing to * this port at the same time. This other process could be running on the other CPU * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out). * Spinlocks protect the info xmit members. @@ -1706,7 +1705,7 @@ static int rp_write(struct tty_struct *tty, if (count <= 0 || rocket_paranoia_check(info, "rp_write")) return 0; - down_interruptible(&info->write_sem); + mutex_lock_interruptible(&info->write_mtx); #ifdef ROCKET_DEBUG_WRITE printk(KERN_INFO "rp_write %d chars...", count); @@ -1777,7 +1776,7 @@ end: wake_up_interruptible(&tty->poll_wait); #endif } - up(&info->write_sem); + mutex_unlock(&info->write_mtx); return retval; } @@ -1852,6 +1851,12 @@ static void rp_flush_buffer(struct tty_struct *tty) #ifdef CONFIG_PCI +static struct pci_device_id __devinitdata rocket_pci_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) }, + { } +}; +MODULE_DEVICE_TABLE(pci, rocket_pci_ids); + /* * Called when a PCI card is found. Retrieves and stores model information, * init's aiopic and serial port hardware. diff --git a/drivers/char/rocket_int.h b/drivers/char/rocket_int.h index 3a8bcc85bc14..89b4d7b10d12 100644 --- a/drivers/char/rocket_int.h +++ b/drivers/char/rocket_int.h @@ -15,6 +15,8 @@ #define ROCKET_TYPE_MODEMIII 3 #define ROCKET_TYPE_PC104 4 +#include <linux/mutex.h> + #include <asm/io.h> #include <asm/byteorder.h> @@ -1171,7 +1173,7 @@ struct r_port { struct wait_queue *close_wait; #endif spinlock_t slock; - struct semaphore write_sem; + struct mutex write_mtx; }; #define RPORT_MAGIC 0x525001 diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index c7dac9b13351..20380a2c4dee 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -388,7 +388,7 @@ static ssize_t rtc_read(struct file *file, char __user *buf, if (!retval) retval = count; out: - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&rtc_wait, &wait); return retval; diff --git a/drivers/char/selection.c b/drivers/char/selection.c index 74cff839c857..a69f094d1ed3 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -299,7 +299,7 @@ int paste_selection(struct tty_struct *tty) pasted += count; } remove_wait_queue(&vc->paste_wait, &wait); - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); tty_ldisc_deref(ld); return 0; diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 5fd314adc1f2..c585b4738f86 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1892,7 +1892,7 @@ block_til_ready(struct tty_struct *tty, struct file *filp, #endif schedule(); } - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); if (!tty_hung_up_p(filp)) { info->count++; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index ce4db6f52362..f02a0795983f 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -4010,8 +4010,13 @@ static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info) for ( i=0; i<info->num_tx_holding_buffers; ++i) { info->tx_holding_buffers[i].buffer = kmalloc(info->max_frame_size, GFP_KERNEL); - if ( info->tx_holding_buffers[i].buffer == NULL ) + if (info->tx_holding_buffers[i].buffer == NULL) { + for (--i; i >= 0; i--) { + kfree(info->tx_holding_buffers[i].buffer); + info->tx_holding_buffers[i].buffer = NULL; + } return -ENOMEM; + } } return 0; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 0a367cd4121f..2a7736b5f2f7 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -3415,6 +3415,9 @@ static void device_init(int adapter_num, struct pci_dev *pdev) } } } + + for (i=0; i < port_count; ++i) + tty_register_device(serial_driver, port_array[i]->line, &(port_array[i]->pdev->dev)); } static int __devinit init_one(struct pci_dev *dev, @@ -3466,6 +3469,8 @@ static void slgt_cleanup(void) printk("unload %s %s\n", driver_name, driver_version); if (serial_driver) { + for (info=slgt_device_list ; info != NULL ; info=info->next_device) + tty_unregister_device(serial_driver, info->line); if ((rc = tty_unregister_driver(serial_driver))) DBGERR(("tty_unregister_driver error=%d\n", rc)); put_tty_driver(serial_driver); @@ -3506,23 +3511,10 @@ static int __init slgt_init(void) printk("%s %s\n", driver_name, driver_version); - slgt_device_count = 0; - if ((rc = pci_register_driver(&pci_driver)) < 0) { - printk("%s pci_register_driver error=%d\n", driver_name, rc); - return rc; - } - pci_registered = 1; - - if (!slgt_device_list) { - printk("%s no devices found\n",driver_name); - pci_unregister_driver(&pci_driver); - return -ENODEV; - } - serial_driver = alloc_tty_driver(MAX_DEVICES); if (!serial_driver) { - rc = -ENOMEM; - goto error; + printk("%s can't allocate tty driver\n", driver_name); + return -ENOMEM; } /* Initialize the tty_driver structure */ @@ -3539,7 +3531,7 @@ static int __init slgt_init(void) B9600 | CS8 | CREAD | HUPCL | CLOCAL; serial_driver->init_termios.c_ispeed = 9600; serial_driver->init_termios.c_ospeed = 9600; - serial_driver->flags = TTY_DRIVER_REAL_RAW; + serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; tty_set_operations(serial_driver, &ops); if ((rc = tty_register_driver(serial_driver)) < 0) { DBGERR(("%s can't register serial driver\n", driver_name)); @@ -3552,6 +3544,16 @@ static int __init slgt_init(void) driver_name, driver_version, serial_driver->major); + slgt_device_count = 0; + if ((rc = pci_register_driver(&pci_driver)) < 0) { + printk("%s pci_register_driver error=%d\n", driver_name, rc); + goto error; + } + pci_registered = 1; + + if (!slgt_device_list) + printk("%s no devices found\n",driver_name); + return 0; error: diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index 1d8c4ae61551..39cc318011ea 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -24,7 +24,6 @@ #include <linux/sysrq.h> #include <linux/kbd_kern.h> #include <linux/quotaops.h> -#include <linux/smp_lock.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/suspend.h> diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c index 47fb20f69695..35b40b996534 100644 --- a/drivers/char/tipar.c +++ b/drivers/char/tipar.c @@ -442,7 +442,7 @@ tipar_register(int nr, struct parport *port) } class_device_create(tipar_class, NULL, MKDEV(TIPAR_MAJOR, - TIPAR_MINOR + nr), NULL, "par%d", nr); + TIPAR_MINOR + nr), port->dev, "par%d", nr); /* Display informations */ pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq == diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index e5a254a434f8..9bb542913b86 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -24,7 +24,9 @@ */ #include <linux/poll.h> +#include <linux/mutex.h> #include <linux/spinlock.h> + #include "tpm.h" enum tpm_const { @@ -328,10 +330,10 @@ static void timeout_work(struct work_struct *work) { struct tpm_chip *chip = container_of(work, struct tpm_chip, work); - down(&chip->buffer_mutex); + mutex_lock(&chip->buffer_mutex); atomic_set(&chip->data_pending, 0); memset(chip->data_buffer, 0, TPM_BUFSIZE); - up(&chip->buffer_mutex); + mutex_unlock(&chip->buffer_mutex); } /* @@ -380,7 +382,7 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, return -E2BIG; } - down(&chip->tpm_mutex); + mutex_lock(&chip->tpm_mutex); if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) { dev_err(chip->dev, @@ -419,7 +421,7 @@ out_recv: dev_err(chip->dev, "tpm_transmit: tpm_recv: error %zd\n", rc); out: - up(&chip->tpm_mutex); + mutex_unlock(&chip->tpm_mutex); return rc; } @@ -942,12 +944,12 @@ int tpm_release(struct inode *inode, struct file *file) { struct tpm_chip *chip = file->private_data; + flush_scheduled_work(); spin_lock(&driver_lock); file->private_data = NULL; - chip->num_opens--; del_singleshot_timer_sync(&chip->user_read_timer); - flush_scheduled_work(); atomic_set(&chip->data_pending, 0); + chip->num_opens--; put_device(chip->dev); kfree(chip->data_buffer); spin_unlock(&driver_lock); @@ -966,14 +968,14 @@ ssize_t tpm_write(struct file *file, const char __user *buf, while (atomic_read(&chip->data_pending) != 0) msleep(TPM_TIMEOUT); - down(&chip->buffer_mutex); + mutex_lock(&chip->buffer_mutex); if (in_size > TPM_BUFSIZE) in_size = TPM_BUFSIZE; if (copy_from_user (chip->data_buffer, (void __user *) buf, in_size)) { - up(&chip->buffer_mutex); + mutex_unlock(&chip->buffer_mutex); return -EFAULT; } @@ -981,7 +983,7 @@ ssize_t tpm_write(struct file *file, const char __user *buf, out_size = tpm_transmit(chip, chip->data_buffer, TPM_BUFSIZE); atomic_set(&chip->data_pending, out_size); - up(&chip->buffer_mutex); + mutex_unlock(&chip->buffer_mutex); /* Set a timeout by which the reader must come claim the result */ mod_timer(&chip->user_read_timer, jiffies + (60 * HZ)); @@ -1004,10 +1006,10 @@ ssize_t tpm_read(struct file *file, char __user *buf, if (size < ret_size) ret_size = size; - down(&chip->buffer_mutex); + mutex_lock(&chip->buffer_mutex); if (copy_to_user(buf, chip->data_buffer, ret_size)) ret_size = -EFAULT; - up(&chip->buffer_mutex); + mutex_unlock(&chip->buffer_mutex); } return ret_size; @@ -1097,11 +1099,16 @@ struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vend /* Driver specific per-device data */ chip = kzalloc(sizeof(*chip), GFP_KERNEL); - if (chip == NULL) + devname = kmalloc(DEVNAME_SIZE, GFP_KERNEL); + + if (chip == NULL || devname == NULL) { + kfree(chip); + kfree(devname); return NULL; + } - init_MUTEX(&chip->buffer_mutex); - init_MUTEX(&chip->tpm_mutex); + mutex_init(&chip->buffer_mutex); + mutex_init(&chip->tpm_mutex); INIT_LIST_HEAD(&chip->list); INIT_WORK(&chip->work, timeout_work); @@ -1124,7 +1131,6 @@ struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vend set_bit(chip->dev_num, dev_mask); - devname = kmalloc(DEVNAME_SIZE, GFP_KERNEL); scnprintf(devname, DEVNAME_SIZE, "%s%d", "tpm", chip->dev_num); chip->vendor.miscdev.name = devname; diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index 9f273f032b0f..b2e2b002a1bb 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -21,6 +21,7 @@ #include <linux/module.h> #include <linux/delay.h> #include <linux/fs.h> +#include <linux/mutex.h> #include <linux/sched.h> #include <linux/miscdevice.h> #include <linux/platform_device.h> @@ -94,11 +95,11 @@ struct tpm_chip { /* Data passed to and from the tpm via the read/write calls */ u8 *data_buffer; atomic_t data_pending; - struct semaphore buffer_mutex; + struct mutex buffer_mutex; struct timer_list user_read_timer; /* user needs to claim result */ struct work_struct work; - struct semaphore tpm_mutex; /* tpm is processing */ + struct mutex tpm_mutex; /* tpm is processing */ struct tpm_vendor_specific vendor; diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h index 3c852009196e..c912d8691cbd 100644 --- a/drivers/char/tpm/tpm_atmel.h +++ b/drivers/char/tpm/tpm_atmel.h @@ -47,12 +47,12 @@ static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size) if (!dn) return NULL; - if (!device_is_compatible(dn, "AT97SC3201")) { + if (!of_device_is_compatible(dn, "AT97SC3201")) { of_node_put(dn); return NULL; } - reg = get_property(dn, "reg", ®len); + reg = of_get_property(dn, "reg", ®len); naddrc = of_n_addr_cells(dn); nsizec = of_n_size_cells(dn); diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 1353b5a6bae8..967002a5a1e5 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -30,12 +30,60 @@ #define TPM_MAX_TRIES 5000 #define TPM_INFINEON_DEV_VEN_VALUE 0x15D1 -/* These values will be filled after PnP-call */ -static int TPM_INF_DATA; -static int TPM_INF_ADDR; -static int TPM_INF_BASE; -static int TPM_INF_ADDR_LEN; -static int TPM_INF_PORT_LEN; +#define TPM_INF_IO_PORT 0x0 +#define TPM_INF_IO_MEM 0x1 + +#define TPM_INF_ADDR 0x0 +#define TPM_INF_DATA 0x1 + +struct tpm_inf_dev { + int iotype; + + void __iomem *mem_base; /* MMIO ioremap'd addr */ + unsigned long map_base; /* phys MMIO base */ + unsigned long map_size; /* MMIO region size */ + unsigned int index_off; /* index register offset */ + + unsigned int data_regs; /* Data registers */ + unsigned int data_size; + + unsigned int config_port; /* IO Port config index reg */ + unsigned int config_size; +}; + +static struct tpm_inf_dev tpm_dev; + +static inline void tpm_data_out(unsigned char data, unsigned char offset) +{ + if (tpm_dev.iotype == TPM_INF_IO_PORT) + outb(data, tpm_dev.data_regs + offset); + else + writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset); +} + +static inline unsigned char tpm_data_in(unsigned char offset) +{ + if (tpm_dev.iotype == TPM_INF_IO_PORT) + return inb(tpm_dev.data_regs + offset); + else + return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset); +} + +static inline void tpm_config_out(unsigned char data, unsigned char offset) +{ + if (tpm_dev.iotype == TPM_INF_IO_PORT) + outb(data, tpm_dev.config_port + offset); + else + writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset); +} + +static inline unsigned char tpm_config_in(unsigned char offset) +{ + if (tpm_dev.iotype == TPM_INF_IO_PORT) + return inb(tpm_dev.config_port + offset); + else + return readb(tpm_dev.mem_base + tpm_dev.index_off + offset); +} /* TPM header definitions */ enum infineon_tpm_header { @@ -105,7 +153,7 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) if (clear_wrfifo) { for (i = 0; i < 4096; i++) { - status = inb(chip->vendor.base + WRFIFO); + status = tpm_data_in(WRFIFO); if (status == 0xff) { if (check == 5) break; @@ -125,8 +173,8 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) */ i = 0; do { - status = inb(chip->vendor.base + RDFIFO); - status = inb(chip->vendor.base + STAT); + status = tpm_data_in(RDFIFO); + status = tpm_data_in(STAT); i++; if (i == TPM_MAX_TRIES) return -EIO; @@ -139,7 +187,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit) int status; int i; for (i = 0; i < TPM_MAX_TRIES; i++) { - status = inb(chip->vendor.base + STAT); + status = tpm_data_in(STAT); /* check the status-register if wait_for_bit is set */ if (status & 1 << wait_for_bit) break; @@ -158,7 +206,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit) static void wait_and_send(struct tpm_chip *chip, u8 sendbyte) { wait(chip, STAT_XFE); - outb(sendbyte, chip->vendor.base + WRFIFO); + tpm_data_out(sendbyte, WRFIFO); } /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more @@ -205,7 +253,7 @@ recv_begin: ret = wait(chip, STAT_RDA); if (ret) return -EIO; - buf[i] = inb(chip->vendor.base + RDFIFO); + buf[i] = tpm_data_in(RDFIFO); } if (buf[0] != TPM_VL_VER) { @@ -220,7 +268,7 @@ recv_begin: for (i = 0; i < size; i++) { wait(chip, STAT_RDA); - buf[i] = inb(chip->vendor.base + RDFIFO); + buf[i] = tpm_data_in(RDFIFO); } if ((size == 0x6D00) && (buf[1] == 0x80)) { @@ -269,7 +317,7 @@ static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count) u8 count_high, count_low, count_4, count_3, count_2, count_1; /* Disabling Reset, LP and IRQC */ - outb(RESET_LP_IRQC_DISABLE, chip->vendor.base + CMD); + tpm_data_out(RESET_LP_IRQC_DISABLE, CMD); ret = empty_fifo(chip, 1); if (ret) { @@ -320,7 +368,7 @@ static void tpm_inf_cancel(struct tpm_chip *chip) static u8 tpm_inf_status(struct tpm_chip *chip) { - return inb(chip->vendor.base + STAT); + return tpm_data_in(STAT); } static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); @@ -381,51 +429,88 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, /* read IO-ports through PnP */ if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) { - TPM_INF_ADDR = pnp_port_start(dev, 0); - TPM_INF_ADDR_LEN = pnp_port_len(dev, 0); - TPM_INF_DATA = (TPM_INF_ADDR + 1); - TPM_INF_BASE = pnp_port_start(dev, 1); - TPM_INF_PORT_LEN = pnp_port_len(dev, 1); - if ((TPM_INF_PORT_LEN < 4) || (TPM_INF_ADDR_LEN < 2)) { + + tpm_dev.iotype = TPM_INF_IO_PORT; + + tpm_dev.config_port = pnp_port_start(dev, 0); + tpm_dev.config_size = pnp_port_len(dev, 0); + tpm_dev.data_regs = pnp_port_start(dev, 1); + tpm_dev.data_size = pnp_port_len(dev, 1); + if ((tpm_dev.data_size < 4) || (tpm_dev.config_size < 2)) { rc = -EINVAL; goto err_last; } dev_info(&dev->dev, "Found %s with ID %s\n", dev->name, dev_id->id); - if (!((TPM_INF_BASE >> 8) & 0xff)) { + if (!((tpm_dev.data_regs >> 8) & 0xff)) { rc = -EINVAL; goto err_last; } /* publish my base address and request region */ - if (request_region - (TPM_INF_BASE, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) { + if (request_region(tpm_dev.data_regs, tpm_dev.data_size, + "tpm_infineon0") == NULL) { rc = -EINVAL; goto err_last; } - if (request_region - (TPM_INF_ADDR, TPM_INF_ADDR_LEN, "tpm_infineon0") == NULL) { + if (request_region(tpm_dev.config_port, tpm_dev.config_size, + "tpm_infineon0") == NULL) { + release_region(tpm_dev.data_regs, tpm_dev.data_size); rc = -EINVAL; goto err_last; } + } else if (pnp_mem_valid(dev, 0) && + !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) { + + tpm_dev.iotype = TPM_INF_IO_MEM; + + tpm_dev.map_base = pnp_mem_start(dev, 0); + tpm_dev.map_size = pnp_mem_len(dev, 0); + + dev_info(&dev->dev, "Found %s with ID %s\n", + dev->name, dev_id->id); + + /* publish my base address and request region */ + if (request_mem_region(tpm_dev.map_base, tpm_dev.map_size, + "tpm_infineon0") == NULL) { + rc = -EINVAL; + goto err_last; + } + + tpm_dev.mem_base = ioremap(tpm_dev.map_base, tpm_dev.map_size); + if (tpm_dev.mem_base == NULL) { + release_mem_region(tpm_dev.map_base, tpm_dev.map_size); + rc = -EINVAL; + goto err_last; + } + + /* + * The only known MMIO based Infineon TPM system provides + * a single large mem region with the device config + * registers at the default TPM_ADDR. The data registers + * seem like they could be placed anywhere within the MMIO + * region, but lets just put them at zero offset. + */ + tpm_dev.index_off = TPM_ADDR; + tpm_dev.data_regs = 0x0; } else { rc = -EINVAL; goto err_last; } /* query chip for its vendor, its version number a.s.o. */ - outb(ENABLE_REGISTER_PAIR, TPM_INF_ADDR); - outb(IDVENL, TPM_INF_ADDR); - vendorid[1] = inb(TPM_INF_DATA); - outb(IDVENH, TPM_INF_ADDR); - vendorid[0] = inb(TPM_INF_DATA); - outb(IDPDL, TPM_INF_ADDR); - productid[1] = inb(TPM_INF_DATA); - outb(IDPDH, TPM_INF_ADDR); - productid[0] = inb(TPM_INF_DATA); - outb(CHIP_ID1, TPM_INF_ADDR); - version[1] = inb(TPM_INF_DATA); - outb(CHIP_ID2, TPM_INF_ADDR); - version[0] = inb(TPM_INF_DATA); + tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR); + tpm_config_out(IDVENL, TPM_INF_ADDR); + vendorid[1] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(IDVENH, TPM_INF_ADDR); + vendorid[0] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(IDPDL, TPM_INF_ADDR); + productid[1] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(IDPDH, TPM_INF_ADDR); + productid[0] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(CHIP_ID1, TPM_INF_ADDR); + version[1] = tpm_config_in(TPM_INF_DATA); + tpm_config_out(CHIP_ID2, TPM_INF_ADDR); + version[0] = tpm_config_in(TPM_INF_DATA); switch ((productid[0] << 8) | productid[1]) { case 6: @@ -442,51 +527,54 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) { /* configure TPM with IO-ports */ - outb(IOLIMH, TPM_INF_ADDR); - outb(((TPM_INF_BASE >> 8) & 0xff), TPM_INF_DATA); - outb(IOLIML, TPM_INF_ADDR); - outb((TPM_INF_BASE & 0xff), TPM_INF_DATA); + tpm_config_out(IOLIMH, TPM_INF_ADDR); + tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA); + tpm_config_out(IOLIML, TPM_INF_ADDR); + tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA); /* control if IO-ports are set correctly */ - outb(IOLIMH, TPM_INF_ADDR); - ioh = inb(TPM_INF_DATA); - outb(IOLIML, TPM_INF_ADDR); - iol = inb(TPM_INF_DATA); + tpm_config_out(IOLIMH, TPM_INF_ADDR); + ioh = tpm_config_in(TPM_INF_DATA); + tpm_config_out(IOLIML, TPM_INF_ADDR); + iol = tpm_config_in(TPM_INF_DATA); - if ((ioh << 8 | iol) != TPM_INF_BASE) { + if ((ioh << 8 | iol) != tpm_dev.data_regs) { dev_err(&dev->dev, - "Could not set IO-ports to 0x%x\n", - TPM_INF_BASE); + "Could not set IO-data registers to 0x%x\n", + tpm_dev.data_regs); rc = -EIO; goto err_release_region; } /* activate register */ - outb(TPM_DAR, TPM_INF_ADDR); - outb(0x01, TPM_INF_DATA); - outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); + tpm_config_out(TPM_DAR, TPM_INF_ADDR); + tpm_config_out(0x01, TPM_INF_DATA); + tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); /* disable RESET, LP and IRQC */ - outb(RESET_LP_IRQC_DISABLE, TPM_INF_BASE + CMD); + tpm_data_out(RESET_LP_IRQC_DISABLE, CMD); /* Finally, we're done, print some infos */ dev_info(&dev->dev, "TPM found: " - "config base 0x%x, " - "io base 0x%x, " + "config base 0x%lx, " + "data base 0x%lx, " "chip version 0x%02x%02x, " "vendor id 0x%x%x (Infineon), " "product id 0x%02x%02x" "%s\n", - TPM_INF_ADDR, - TPM_INF_BASE, + tpm_dev.iotype == TPM_INF_IO_PORT ? + tpm_dev.config_port : + tpm_dev.map_base + tpm_dev.index_off, + tpm_dev.iotype == TPM_INF_IO_PORT ? + tpm_dev.data_regs : + tpm_dev.map_base + tpm_dev.data_regs, version[0], version[1], vendorid[0], vendorid[1], productid[0], productid[1], chipname); - if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf))) { + if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf))) goto err_release_region; - } - chip->vendor.base = TPM_INF_BASE; + return 0; } else { rc = -ENODEV; @@ -494,8 +582,13 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, } err_release_region: - release_region(TPM_INF_BASE, TPM_INF_PORT_LEN); - release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN); + if (tpm_dev.iotype == TPM_INF_IO_PORT) { + release_region(tpm_dev.data_regs, tpm_dev.data_size); + release_region(tpm_dev.config_port, tpm_dev.config_size); + } else { + iounmap(tpm_dev.mem_base); + release_mem_region(tpm_dev.map_base, tpm_dev.map_size); + } err_last: return rc; @@ -506,8 +599,14 @@ static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev) struct tpm_chip *chip = pnp_get_drvdata(dev); if (chip) { - release_region(TPM_INF_BASE, TPM_INF_PORT_LEN); - release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN); + if (tpm_dev.iotype == TPM_INF_IO_PORT) { + release_region(tpm_dev.data_regs, tpm_dev.data_size); + release_region(tpm_dev.config_port, + tpm_dev.config_size); + } else { + iounmap(tpm_dev.mem_base); + release_mem_region(tpm_dev.map_base, tpm_dev.map_size); + } tpm_remove_hardware(chip->dev); } } @@ -539,5 +638,5 @@ module_exit(cleanup_inf); MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>"); MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); -MODULE_VERSION("1.8"); +MODULE_VERSION("1.9"); MODULE_LICENSE("GPL"); diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 389da364e6b6..7710a6a77d97 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -141,8 +141,6 @@ static DECLARE_MUTEX(allocated_ptys_lock); static int ptmx_open(struct inode *, struct file *); #endif -extern void disable_early_printk(void); - static void initialize_tty_struct(struct tty_struct *tty); static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *); @@ -155,8 +153,8 @@ int tty_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg); static int tty_fasync(int fd, struct file * filp, int on); static void release_tty(struct tty_struct *tty, int idx); -static struct pid *__proc_set_tty(struct task_struct *tsk, - struct tty_struct *tty); +static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty); +static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty); /** * alloc_tty_struct - allocate a tty object @@ -1534,10 +1532,9 @@ void disassociate_ctty(int on_exit) } spin_lock_irq(¤t->sighand->siglock); - tty_pgrp = current->signal->tty_old_pgrp; + put_pid(current->signal->tty_old_pgrp); current->signal->tty_old_pgrp = NULL; spin_unlock_irq(¤t->sighand->siglock); - put_pid(tty_pgrp); mutex_lock(&tty_mutex); /* It is possible that do_tty_hangup has free'd this tty */ @@ -1562,6 +1559,18 @@ void disassociate_ctty(int on_exit) unlock_kernel(); } +/** + * + * no_tty - Ensure the current process does not have a controlling tty + */ +void no_tty(void) +{ + struct task_struct *tsk = current; + if (tsk->signal->leader) + disassociate_ctty(0); + proc_clear_tty(tsk); +} + /** * stop_tty - propogate flow control @@ -2508,7 +2517,6 @@ static int tty_open(struct inode * inode, struct file * filp) int index; dev_t device = inode->i_rdev; unsigned short saved_flags = filp->f_flags; - struct pid *old_pgrp; nonseekable_open(inode, filp); @@ -2602,17 +2610,15 @@ got_driver: goto retry_open; } - old_pgrp = NULL; mutex_lock(&tty_mutex); spin_lock_irq(¤t->sighand->siglock); if (!noctty && current->signal->leader && !current->signal->tty && tty->session == NULL) - old_pgrp = __proc_set_tty(current, tty); + __proc_set_tty(current, tty); spin_unlock_irq(¤t->sighand->siglock); mutex_unlock(&tty_mutex); - put_pid(old_pgrp); return 0; } @@ -3287,9 +3293,7 @@ int tty_ioctl(struct inode * inode, struct file * file, case TIOCNOTTY: if (current->signal->tty != tty) return -ENOTTY; - if (current->signal->leader) - disassociate_ctty(0); - proc_clear_tty(current); + no_tty(); return 0; case TIOCSCTTY: return tiocsctty(tty, arg); @@ -3766,7 +3770,9 @@ int tty_register_driver(struct tty_driver *driver) if (!driver->put_char) driver->put_char = tty_default_put_char; + mutex_lock(&tty_mutex); list_add(&driver->tty_drivers, &tty_drivers); + mutex_unlock(&tty_mutex); if ( !(driver->flags & TTY_DRIVER_DYNAMIC_DEV) ) { for(i = 0; i < driver->num; i++) @@ -3792,8 +3798,9 @@ int tty_unregister_driver(struct tty_driver *driver) unregister_chrdev_region(MKDEV(driver->major, driver->minor_start), driver->num); - + mutex_lock(&tty_mutex); list_del(&driver->tty_drivers); + mutex_unlock(&tty_mutex); /* * Free the termios and termios_locked structures because @@ -3836,11 +3843,9 @@ void proc_clear_tty(struct task_struct *p) p->signal->tty = NULL; spin_unlock_irq(&p->sighand->siglock); } -EXPORT_SYMBOL(proc_clear_tty); -static struct pid *__proc_set_tty(struct task_struct *tsk, struct tty_struct *tty) +static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty) { - struct pid *old_pgrp; if (tty) { /* We should not have a session or pgrp to here but.... */ put_pid(tty->session); @@ -3848,21 +3853,16 @@ static struct pid *__proc_set_tty(struct task_struct *tsk, struct tty_struct *tt tty->session = get_pid(task_session(tsk)); tty->pgrp = get_pid(task_pgrp(tsk)); } - old_pgrp = tsk->signal->tty_old_pgrp; + put_pid(tsk->signal->tty_old_pgrp); tsk->signal->tty = tty; tsk->signal->tty_old_pgrp = NULL; - return old_pgrp; } -void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty) +static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty) { - struct pid *old_pgrp; - spin_lock_irq(&tsk->sighand->siglock); - old_pgrp = __proc_set_tty(tsk, tty); + __proc_set_tty(tsk, tty); spin_unlock_irq(&tsk->sighand->siglock); - - put_pid(old_pgrp); } struct tty_struct *get_current_tty(void) @@ -3897,9 +3897,6 @@ void __init console_init(void) * set up the console device so that later boot sequences can * inform about problems etc.. */ -#ifdef CONFIG_EARLY_PRINTK - disable_early_printk(); -#endif call = __con_initcall_start; while (call < __con_initcall_end) { (*call)(); diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index 791930320a13..83aeedda200c 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -28,12 +28,13 @@ #include <linux/interrupt.h> #include <linux/mm.h> #include <linux/init.h> +#include <linux/mutex.h> #include <linux/vt_kern.h> #include <linux/selection.h> #include <linux/kbd_kern.h> #include <linux/console.h> -#include <linux/smp_lock.h> #include <linux/device.h> + #include <asm/uaccess.h> #include <asm/byteorder.h> #include <asm/unaligned.h> @@ -70,11 +71,11 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig) { int size; - down(&con_buf_sem); + mutex_lock(&con_buf_mtx); size = vcs_size(file->f_path.dentry->d_inode); switch (orig) { default: - up(&con_buf_sem); + mutex_unlock(&con_buf_mtx); return -EINVAL; case 2: offset += size; @@ -85,11 +86,11 @@ static loff_t vcs_lseek(struct file *file, loff_t offset, int orig) break; } if (offset < 0 || offset > size) { - up(&con_buf_sem); + mutex_unlock(&con_buf_mtx); return -EINVAL; } file->f_pos = offset; - up(&con_buf_sem); + mutex_unlock(&con_buf_mtx); return file->f_pos; } @@ -106,7 +107,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) unsigned short *org = NULL; ssize_t ret; - down(&con_buf_sem); + mutex_lock(&con_buf_mtx); pos = *ppos; @@ -263,7 +264,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) ret = read; unlock_out: release_console_sem(); - up(&con_buf_sem); + mutex_unlock(&con_buf_mtx); return ret; } @@ -280,7 +281,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) u16 *org0 = NULL, *org = NULL; size_t ret; - down(&con_buf_sem); + mutex_lock(&con_buf_mtx); pos = *ppos; @@ -450,7 +451,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) unlock_out: release_console_sem(); - up(&con_buf_sem); + mutex_unlock(&con_buf_mtx); return ret; } diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 1bbb45b937fd..bbd9fc412877 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -86,6 +86,7 @@ #include <linux/mm.h> #include <linux/console.h> #include <linux/init.h> +#include <linux/mutex.h> #include <linux/vt_kern.h> #include <linux/selection.h> #include <linux/tiocl.h> @@ -157,6 +158,8 @@ static void blank_screen_t(unsigned long dummy); static void set_palette(struct vc_data *vc); static int printable; /* Is console ready for printing? */ +static int default_utf8; +module_param(default_utf8, int, S_IRUGO | S_IWUSR); /* * ignore_poke: don't unblank the screen when things are typed. This is @@ -348,10 +351,12 @@ void update_region(struct vc_data *vc, unsigned long start, int count) /* Structure of attributes is hardware-dependent */ -static u8 build_attr(struct vc_data *vc, u8 _color, u8 _intensity, u8 _blink, u8 _underline, u8 _reverse) +static u8 build_attr(struct vc_data *vc, u8 _color, u8 _intensity, u8 _blink, + u8 _underline, u8 _reverse, u8 _italic) { if (vc->vc_sw->con_build_attr) - return vc->vc_sw->con_build_attr(vc, _color, _intensity, _blink, _underline, _reverse); + return vc->vc_sw->con_build_attr(vc, _color, _intensity, + _blink, _underline, _reverse, _italic); #ifndef VT_BUF_VRAM_ONLY /* @@ -368,10 +373,13 @@ static u8 build_attr(struct vc_data *vc, u8 _color, u8 _intensity, u8 _blink, u8 u8 a = vc->vc_color; if (!vc->vc_can_do_color) return _intensity | + (_italic ? 2 : 0) | (_underline ? 4 : 0) | (_reverse ? 8 : 0) | (_blink ? 0x80 : 0); - if (_underline) + if (_italic) + a = (a & 0xF0) | vc->vc_itcolor; + else if (_underline) a = (a & 0xf0) | vc->vc_ulcolor; else if (_intensity == 0) a = (a & 0xf0) | vc->vc_ulcolor; @@ -392,8 +400,10 @@ static u8 build_attr(struct vc_data *vc, u8 _color, u8 _intensity, u8 _blink, u8 static void update_attr(struct vc_data *vc) { - vc->vc_attr = build_attr(vc, vc->vc_color, vc->vc_intensity, vc->vc_blink, vc->vc_underline, vc->vc_reverse ^ vc->vc_decscnm); - vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm) << 8) | ' '; + vc->vc_attr = build_attr(vc, vc->vc_color, vc->vc_intensity, + vc->vc_blink, vc->vc_underline, + vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic); + vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' '; } /* Note: inverting the screen twice should revert to the original state */ @@ -934,6 +944,10 @@ int default_grn[] = {0x00,0x00,0xaa,0x55,0x00,0x00,0xaa,0xaa, int default_blu[] = {0x00,0x00,0x00,0x00,0xaa,0xaa,0xaa,0xaa, 0x55,0x55,0x55,0x55,0xff,0xff,0xff,0xff}; +module_param_array(default_red, int, NULL, S_IRUGO | S_IWUSR); +module_param_array(default_grn, int, NULL, S_IRUGO | S_IWUSR); +module_param_array(default_blu, int, NULL, S_IRUGO | S_IWUSR); + /* * gotoxy() must verify all boundaries, because the arguments * might also be negative. If the given position is out of @@ -1132,6 +1146,7 @@ static void csi_X(struct vc_data *vc, int vpar) /* erase the following vpar posi static void default_attr(struct vc_data *vc) { vc->vc_intensity = 1; + vc->vc_italic = 0; vc->vc_underline = 0; vc->vc_reverse = 0; vc->vc_blink = 0; @@ -1154,6 +1169,9 @@ static void csi_m(struct vc_data *vc) case 2: vc->vc_intensity = 0; break; + case 3: + vc->vc_italic = 1; + break; case 4: vc->vc_underline = 1; break; @@ -1194,6 +1212,9 @@ static void csi_m(struct vc_data *vc) case 22: vc->vc_intensity = 1; break; + case 23: + vc->vc_italic = 0; + break; case 24: vc->vc_underline = 0; break; @@ -1454,6 +1475,7 @@ static void save_cur(struct vc_data *vc) vc->vc_saved_x = vc->vc_x; vc->vc_saved_y = vc->vc_y; vc->vc_s_intensity = vc->vc_intensity; + vc->vc_s_italic = vc->vc_italic; vc->vc_s_underline = vc->vc_underline; vc->vc_s_blink = vc->vc_blink; vc->vc_s_reverse = vc->vc_reverse; @@ -1468,6 +1490,7 @@ static void restore_cur(struct vc_data *vc) { gotoxy(vc, vc->vc_saved_x, vc->vc_saved_y); vc->vc_intensity = vc->vc_s_intensity; + vc->vc_italic = vc->vc_s_italic; vc->vc_underline = vc->vc_s_underline; vc->vc_blink = vc->vc_s_blink; vc->vc_reverse = vc->vc_s_reverse; @@ -1497,7 +1520,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) vc->vc_charset = 0; vc->vc_need_wrap = 0; vc->vc_report_mouse = 0; - vc->vc_utf = 0; + vc->vc_utf = default_utf8; vc->vc_utf_count = 0; vc->vc_disp_ctrl = 0; @@ -1930,7 +1953,47 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) * kernel memory allocation is available. */ char con_buf[CON_BUF_SIZE]; -DECLARE_MUTEX(con_buf_sem); +DEFINE_MUTEX(con_buf_mtx); + +/* is_double_width() is based on the wcwidth() implementation by + * Markus Kuhn -- 2003-05-20 (Unicode 4.0) + * Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c + */ +struct interval { + uint32_t first; + uint32_t last; +}; + +static int bisearch(uint32_t ucs, const struct interval *table, int max) +{ + int min = 0; + int mid; + + if (ucs < table[0].first || ucs > table[max].last) + return 0; + while (max >= min) { + mid = (min + max) / 2; + if (ucs > table[mid].last) + min = mid + 1; + else if (ucs < table[mid].first) + max = mid - 1; + else + return 1; + } + return 0; +} + +static int is_double_width(uint32_t ucs) +{ + static const struct interval double_width[] = { + { 0x1100, 0x115F }, { 0x2329, 0x232A }, { 0x2E80, 0x303E }, + { 0x3040, 0xA4CF }, { 0xAC00, 0xD7A3 }, { 0xF900, 0xFAFF }, + { 0xFE30, 0xFE6F }, { 0xFF00, 0xFF60 }, { 0xFFE0, 0xFFE6 }, + { 0x20000, 0x2FFFD }, { 0x30000, 0x3FFFD } + }; + return bisearch(ucs, double_width, + sizeof(double_width) / sizeof(*double_width) - 1); +} /* acquires console_sem */ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -1948,6 +2011,10 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co unsigned int currcons; unsigned long draw_from = 0, draw_to = 0; struct vc_data *vc; + unsigned char vc_attr; + uint8_t rescan; + uint8_t inverse; + uint8_t width; u16 himask, charmask; const unsigned char *orig_buf = NULL; int orig_count; @@ -1983,7 +2050,7 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co /* At this point 'buf' is guaranteed to be a kernel buffer * and therefore no access to userspace (and therefore sleeping) - * will be needed. The con_buf_sem serializes all tty based + * will be needed. The con_buf_mtx serializes all tty based * console rendering and vcs write/read operations. We hold * the console spinlock during the entire write. */ @@ -2010,53 +2077,86 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co buf++; n++; count--; + rescan = 0; + inverse = 0; + width = 1; /* Do no translation at all in control states */ if (vc->vc_state != ESnormal) { tc = c; } else if (vc->vc_utf && !vc->vc_disp_ctrl) { - /* Combine UTF-8 into Unicode */ - /* Malformed sequences as sequences of replacement glyphs */ + /* Combine UTF-8 into Unicode in vc_utf_char. + * vc_utf_count is the number of continuation bytes still + * expected to arrive. + * vc_npar is the number of continuation bytes arrived so + * far + */ rescan_last_byte: - if(c > 0x7f) { + if ((c & 0xc0) == 0x80) { + /* Continuation byte received */ + static const uint32_t utf8_length_changes[] = { 0x0000007f, 0x000007ff, 0x0000ffff, 0x001fffff, 0x03ffffff, 0x7fffffff }; if (vc->vc_utf_count) { - if ((c & 0xc0) == 0x80) { - vc->vc_utf_char = (vc->vc_utf_char << 6) | (c & 0x3f); - if (--vc->vc_utf_count) { - vc->vc_npar++; - continue; - } - tc = c = vc->vc_utf_char; - } else - goto replacement_glyph; - } else { - vc->vc_npar = 0; - if ((c & 0xe0) == 0xc0) { - vc->vc_utf_count = 1; - vc->vc_utf_char = (c & 0x1f); - } else if ((c & 0xf0) == 0xe0) { - vc->vc_utf_count = 2; - vc->vc_utf_char = (c & 0x0f); - } else if ((c & 0xf8) == 0xf0) { - vc->vc_utf_count = 3; - vc->vc_utf_char = (c & 0x07); - } else if ((c & 0xfc) == 0xf8) { - vc->vc_utf_count = 4; - vc->vc_utf_char = (c & 0x03); - } else if ((c & 0xfe) == 0xfc) { - vc->vc_utf_count = 5; - vc->vc_utf_char = (c & 0x01); - } else - goto replacement_glyph; + vc->vc_utf_char = (vc->vc_utf_char << 6) | (c & 0x3f); + vc->vc_npar++; + if (--vc->vc_utf_count) { + /* Still need some bytes */ continue; - } + } + /* Got a whole character */ + c = vc->vc_utf_char; + /* Reject overlong sequences */ + if (c <= utf8_length_changes[vc->vc_npar - 1] || + c > utf8_length_changes[vc->vc_npar]) + c = 0xfffd; + } else { + /* Unexpected continuation byte */ + vc->vc_utf_count = 0; + c = 0xfffd; + } } else { - if (vc->vc_utf_count) - goto replacement_glyph; - tc = c; + /* Single ASCII byte or first byte of a sequence received */ + if (vc->vc_utf_count) { + /* Continuation byte expected */ + rescan = 1; + vc->vc_utf_count = 0; + c = 0xfffd; + } else if (c > 0x7f) { + /* First byte of a multibyte sequence received */ + vc->vc_npar = 0; + if ((c & 0xe0) == 0xc0) { + vc->vc_utf_count = 1; + vc->vc_utf_char = (c & 0x1f); + } else if ((c & 0xf0) == 0xe0) { + vc->vc_utf_count = 2; + vc->vc_utf_char = (c & 0x0f); + } else if ((c & 0xf8) == 0xf0) { + vc->vc_utf_count = 3; + vc->vc_utf_char = (c & 0x07); + } else if ((c & 0xfc) == 0xf8) { + vc->vc_utf_count = 4; + vc->vc_utf_char = (c & 0x03); + } else if ((c & 0xfe) == 0xfc) { + vc->vc_utf_count = 5; + vc->vc_utf_char = (c & 0x01); + } else { + /* 254 and 255 are invalid */ + c = 0xfffd; + } + if (vc->vc_utf_count) { + /* Still need some bytes */ + continue; + } + } + /* Nothing to do if an ASCII byte was received */ } + /* End of UTF-8 decoding. */ + /* c is the received character, or U+FFFD for invalid sequences. */ + /* Replace invalid Unicode code points with U+FFFD too */ + if ((c >= 0xd800 && c <= 0xdfff) || c == 0xfffe || c == 0xffff) + c = 0xfffd; + tc = c; } else { /* no utf or alternate charset mode */ - tc = vc->vc_translate[vc->vc_toggle_meta ? (c | 0x80) : c]; + tc = vc->vc_translate[vc->vc_toggle_meta ? (c | 0x80) : c]; } /* If the original code was a control character we @@ -2076,56 +2176,80 @@ rescan_last_byte: && (c != 128+27); if (vc->vc_state == ESnormal && ok) { + if (vc->vc_utf && !vc->vc_disp_ctrl) { + if (is_double_width(c)) + width = 2; + } /* Now try to find out how to display it */ tc = conv_uni_to_pc(vc, tc); if (tc & ~charmask) { - if ( tc == -4 ) { - /* If we got -4 (not found) then see if we have - defined a replacement character (U+FFFD) */ -replacement_glyph: - tc = conv_uni_to_pc(vc, 0xfffd); - if (!(tc & ~charmask)) - goto display_glyph; - } else if ( tc != -3 ) - continue; /* nothing to display */ - /* no hash table or no replacement -- - * hope for the best */ - if ( c & ~charmask ) - tc = '?'; - else - tc = c; + if (tc == -1 || tc == -2) { + continue; /* nothing to display */ + } + /* Glyph not found */ + if (!(vc->vc_utf && !vc->vc_disp_ctrl) && !(c & ~charmask)) { + /* In legacy mode use the glyph we get by a 1:1 mapping. + This would make absolutely no sense with Unicode in mind. */ + tc = c; + } else { + /* Display U+FFFD. If it's not found, display an inverse question mark. */ + tc = conv_uni_to_pc(vc, 0xfffd); + if (tc < 0) { + inverse = 1; + tc = conv_uni_to_pc(vc, '?'); + if (tc < 0) tc = '?'; + } + } } -display_glyph: - if (vc->vc_need_wrap || vc->vc_decim) - FLUSH - if (vc->vc_need_wrap) { - cr(vc); - lf(vc); - } - if (vc->vc_decim) - insert_char(vc, 1); - scr_writew(himask ? - ((vc->vc_attr << 8) & ~himask) + ((tc & 0x100) ? himask : 0) + (tc & 0xff) : - (vc->vc_attr << 8) + tc, - (u16 *) vc->vc_pos); - if (DO_UPDATE(vc) && draw_x < 0) { - draw_x = vc->vc_x; - draw_from = vc->vc_pos; - } - if (vc->vc_x == vc->vc_cols - 1) { - vc->vc_need_wrap = vc->vc_decawm; - draw_to = vc->vc_pos + 2; + if (!inverse) { + vc_attr = vc->vc_attr; } else { - vc->vc_x++; - draw_to = (vc->vc_pos += 2); + /* invert vc_attr */ + if (!vc->vc_can_do_color) { + vc_attr = (vc->vc_attr) ^ 0x08; + } else if (vc->vc_hi_font_mask == 0x100) { + vc_attr = ((vc->vc_attr) & 0x11) | (((vc->vc_attr) & 0xe0) >> 4) | (((vc->vc_attr) & 0x0e) << 4); + } else { + vc_attr = ((vc->vc_attr) & 0x88) | (((vc->vc_attr) & 0x70) >> 4) | (((vc->vc_attr) & 0x07) << 4); + } } - if (vc->vc_utf_count) { - if (vc->vc_npar) { - vc->vc_npar--; - goto display_glyph; + + while (1) { + if (vc->vc_need_wrap || vc->vc_decim) + FLUSH + if (vc->vc_need_wrap) { + cr(vc); + lf(vc); + } + if (vc->vc_decim) + insert_char(vc, 1); + scr_writew(himask ? + ((vc_attr << 8) & ~himask) + ((tc & 0x100) ? himask : 0) + (tc & 0xff) : + (vc_attr << 8) + tc, + (u16 *) vc->vc_pos); + if (DO_UPDATE(vc) && draw_x < 0) { + draw_x = vc->vc_x; + draw_from = vc->vc_pos; + } + if (vc->vc_x == vc->vc_cols - 1) { + vc->vc_need_wrap = vc->vc_decawm; + draw_to = vc->vc_pos + 2; + } else { + vc->vc_x++; + draw_to = (vc->vc_pos += 2); } - vc->vc_utf_count = 0; + + if (!--width) break; + + tc = conv_uni_to_pc(vc, ' '); /* A space is printed in the second column */ + if (tc < 0) tc = ' '; + } + + if (rescan) { + rescan = 0; + inverse = 0; + width = 1; c = orig; goto rescan_last_byte; } @@ -2581,6 +2705,11 @@ static void con_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&tty_mutex); } +static int default_italic_color = 2; // green (ASCII) +static int default_underline_color = 3; // cyan (ASCII) +module_param_named(italic, default_italic_color, int, S_IRUGO | S_IWUSR); +module_param_named(underline, default_underline_color, int, S_IRUGO | S_IWUSR); + static void vc_init(struct vc_data *vc, unsigned int rows, unsigned int cols, int do_clear) { @@ -2600,7 +2729,8 @@ static void vc_init(struct vc_data *vc, unsigned int rows, vc->vc_palette[k++] = default_blu[j] ; } vc->vc_def_color = 0x07; /* white */ - vc->vc_ulcolor = 0x0f; /* bold white */ + vc->vc_ulcolor = default_underline_color; + vc->vc_itcolor = default_italic_color; vc->vc_halfcolor = 0x08; /* grey */ init_waitqueue_head(&vc->paste_wait); reset_terminal(vc, do_clear); diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index c9f2dd620e87..c6f6f4209739 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -1061,7 +1061,7 @@ int vt_waitactive(int vt) schedule(); } remove_wait_queue(&vt_activate_queue, &wait); - current->state = TASK_RUNNING; + __set_current_state(TASK_RUNNING); return retval; } diff --git a/drivers/char/watchdog/omap_wdt.c b/drivers/char/watchdog/omap_wdt.c index 84074a697dce..b36fa8de2131 100644 --- a/drivers/char/watchdog/omap_wdt.c +++ b/drivers/char/watchdog/omap_wdt.c @@ -34,7 +34,6 @@ #include <linux/miscdevice.h> #include <linux/watchdog.h> #include <linux/reboot.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/err.h> #include <linux/platform_device.h> diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 8d053f500fc2..8532bb79e5fc 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -470,7 +470,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) dbs_info->enable = 1; ondemand_powersave_bias_init(); dbs_info->sample_type = DBS_NORMAL_SAMPLE; - INIT_DELAYED_WORK(&dbs_info->work, do_dbs_timer); + INIT_DELAYED_WORK_DEFERRABLE(&dbs_info->work, do_dbs_timer); queue_delayed_work_on(dbs_info->cpu, kondemand_wq, &dbs_info->work, delay); } diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c index 161fe09a6d38..2800b3e614a9 100644 --- a/drivers/edac/i82875p_edac.c +++ b/drivers/edac/i82875p_edac.c @@ -261,10 +261,6 @@ static void i82875p_check(struct mem_ctl_info *mci) i82875p_process_error_info(mci, &info, 1); } -#ifdef CONFIG_PROC_FS -extern int pci_proc_attach_device(struct pci_dev *); -#endif - /* Return 0 on success or 1 on failure. */ static int i82875p_setup_overfl_dev(struct pci_dev *pdev, struct pci_dev **ovrfl_pdev, void __iomem **ovrfl_window) @@ -287,17 +283,12 @@ static int i82875p_setup_overfl_dev(struct pci_dev *pdev, if (dev == NULL) return 1; + + pci_bus_add_device(dev); } *ovrfl_pdev = dev; -#ifdef CONFIG_PROC_FS - if ((dev->procent == NULL) && pci_proc_attach_device(dev)) { - i82875p_printk(KERN_ERR, "%s(): Failed to attach overflow " - "device\n", __func__); - return 1; - } -#endif /* CONFIG_PROC_FS */ if (pci_enable_device(dev)) { i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow " "device\n", __func__); diff --git a/drivers/eisa/virtual_root.c b/drivers/eisa/virtual_root.c index 9b4fcac03ad5..3074879f231f 100644 --- a/drivers/eisa/virtual_root.c +++ b/drivers/eisa/virtual_root.c @@ -47,7 +47,7 @@ static void virtual_eisa_release (struct device *dev) /* nothing really to do here */ } -static int virtual_eisa_root_init (void) +static int __init virtual_eisa_root_init (void) { int r; diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 62e21cc73938..6ec04e79f685 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -20,7 +20,6 @@ #include <linux/kernel.h> #include <linux/list.h> #include <linux/mm.h> -#include <linux/smp_lock.h> #include <linux/spinlock.h> #include <asm/unaligned.h> #include <asm/byteorder.h> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index a853eb2dda73..3ba3a5221c41 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -617,6 +617,30 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. +config SENSORS_APPLESMC + tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" + depends on HWMON && INPUT && X86 + select NEW_LEDS + select LEDS_CLASS + default n + help + This driver provides support for the Apple System Management + Controller, which provides an accelerometer (Apple Sudden Motion + Sensor), light sensors, temperature sensors, keyboard backlight + control and fan control. + + Only Intel-based Apple's computers are supported (MacBook Pro, + MacBook, MacMini). + + Data from the different sensors, keyboard backlight control and fan + control are accessible via sysfs. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of applesmc. + config HWMON_DEBUG_CHIP bool "Hardware Monitoring Chip debugging messages" default n diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index d83f2380e089..cfaf338919dd 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o +obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o obj-$(CONFIG_SENSORS_AMS) += ams/ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/hwmon/ams/ams-core.c index e0098a3fae5d..6db973739725 100644 --- a/drivers/hwmon/ams/ams-core.c +++ b/drivers/hwmon/ams/ams-core.c @@ -144,7 +144,7 @@ int ams_sensor_attach(void) const u32 *prop; /* Get orientation */ - prop = get_property(ams_info.of_node, "orientation", NULL); + prop = of_get_property(ams_info.of_node, "orientation", NULL); if (!prop) return -ENODEV; ams_info.orient1 = *prop; @@ -208,14 +208,14 @@ int __init ams_init(void) #ifdef CONFIG_SENSORS_AMS_I2C np = of_find_node_by_name(NULL, "accelerometer"); - if (np && device_is_compatible(np, "AAPL,accelerometer_1")) + if (np && of_device_is_compatible(np, "AAPL,accelerometer_1")) /* Found I2C motion sensor */ return ams_i2c_init(np); #endif #ifdef CONFIG_SENSORS_AMS_PMU np = of_find_node_by_name(NULL, "sms"); - if (np && device_is_compatible(np, "sms")) + if (np && of_device_is_compatible(np, "sms")) /* Found PMU motion sensor */ return ams_pmu_init(np); #endif diff --git a/drivers/hwmon/ams/ams-i2c.c b/drivers/hwmon/ams/ams-i2c.c index 5c70f2e3022e..957760536a4c 100644 --- a/drivers/hwmon/ams/ams-i2c.c +++ b/drivers/hwmon/ams/ams-i2c.c @@ -276,7 +276,7 @@ int __init ams_i2c_init(struct device_node *np) ams_info.bustype = BUS_I2C; /* look for bus either using "reg" or by path */ - prop = get_property(ams_info.of_node, "reg", NULL); + prop = of_get_property(ams_info.of_node, "reg", NULL); if (!prop) { result = -ENODEV; diff --git a/drivers/hwmon/ams/ams-pmu.c b/drivers/hwmon/ams/ams-pmu.c index 1b01c215bfe7..9463e9768f6f 100644 --- a/drivers/hwmon/ams/ams-pmu.c +++ b/drivers/hwmon/ams/ams-pmu.c @@ -160,7 +160,7 @@ int __init ams_pmu_init(struct device_node *np) ams_info.bustype = BUS_HOST; /* Get PMU command, should be 0x4e, but we can never know */ - prop = get_property(ams_info.of_node, "reg", NULL); + prop = of_get_property(ams_info.of_node, "reg", NULL); if (!prop) { result = -ENODEV; goto exit; diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c new file mode 100644 index 000000000000..3215f9c87f32 --- /dev/null +++ b/drivers/hwmon/applesmc.c @@ -0,0 +1,1339 @@ +/* + * drivers/hwmon/applesmc.c - driver for Apple's SMC (accelerometer, temperature + * sensors, fan control, keyboard backlight control) used in Intel-based Apple + * computers. + * + * Copyright (C) 2007 Nicolas Boichat <nicolas@boichat.ch> + * + * Based on hdaps.c driver: + * Copyright (C) 2005 Robert Love <rml@novell.com> + * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com> + * + * Fan control based on smcFanControl: + * Copyright (C) 2006 Hendrik Holtmann <holtmann@mac.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/timer.h> +#include <linux/dmi.h> +#include <linux/mutex.h> +#include <linux/hwmon-sysfs.h> +#include <asm/io.h> +#include <linux/leds.h> +#include <linux/hwmon.h> +#include <linux/workqueue.h> + +/* data port used by Apple SMC */ +#define APPLESMC_DATA_PORT 0x300 +/* command/status port used by Apple SMC */ +#define APPLESMC_CMD_PORT 0x304 + +#define APPLESMC_NR_PORTS 32 /* 0x300-0x31f */ + +#define APPLESMC_MAX_DATA_LENGTH 32 + +#define APPLESMC_STATUS_MASK 0x0f +#define APPLESMC_READ_CMD 0x10 +#define APPLESMC_WRITE_CMD 0x11 +#define APPLESMC_GET_KEY_BY_INDEX_CMD 0x12 +#define APPLESMC_GET_KEY_TYPE_CMD 0x13 + +#define KEY_COUNT_KEY "#KEY" /* r-o ui32 */ + +#define LIGHT_SENSOR_LEFT_KEY "ALV0" /* r-o {alv (6 bytes) */ +#define LIGHT_SENSOR_RIGHT_KEY "ALV1" /* r-o {alv (6 bytes) */ +#define BACKLIGHT_KEY "LKSB" /* w-o {lkb (2 bytes) */ + +#define CLAMSHELL_KEY "MSLD" /* r-o ui8 (unused) */ + +#define MOTION_SENSOR_X_KEY "MO_X" /* r-o sp78 (2 bytes) */ +#define MOTION_SENSOR_Y_KEY "MO_Y" /* r-o sp78 (2 bytes) */ +#define MOTION_SENSOR_Z_KEY "MO_Z" /* r-o sp78 (2 bytes) */ +#define MOTION_SENSOR_KEY "MOCN" /* r/w ui16 */ + +#define FANS_COUNT "FNum" /* r-o ui8 */ +#define FANS_MANUAL "FS! " /* r-w ui16 */ +#define FAN_ACTUAL_SPEED "F0Ac" /* r-o fpe2 (2 bytes) */ +#define FAN_MIN_SPEED "F0Mn" /* r-o fpe2 (2 bytes) */ +#define FAN_MAX_SPEED "F0Mx" /* r-o fpe2 (2 bytes) */ +#define FAN_SAFE_SPEED "F0Sf" /* r-o fpe2 (2 bytes) */ +#define FAN_TARGET_SPEED "F0Tg" /* r-w fpe2 (2 bytes) */ +#define FAN_POSITION "F0ID" /* r-o char[16] */ + +/* + * Temperature sensors keys (sp78 - 2 bytes). + * First set for Macbook(Pro), second for Macmini. + */ +static const char* temperature_sensors_sets[][13] = { + { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H", + "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL }, + { "TC0D", "TC0P", NULL } +}; + +/* List of keys used to read/write fan speeds */ +static const char* fan_speed_keys[] = { + FAN_ACTUAL_SPEED, + FAN_MIN_SPEED, + FAN_MAX_SPEED, + FAN_SAFE_SPEED, + FAN_TARGET_SPEED +}; + +#define INIT_TIMEOUT_MSECS 5000 /* wait up to 5s for device init ... */ +#define INIT_WAIT_MSECS 50 /* ... in 50ms increments */ + +#define APPLESMC_POLL_PERIOD (HZ/20) /* poll for input every 1/20s */ +#define APPLESMC_INPUT_FUZZ 4 /* input event threshold */ +#define APPLESMC_INPUT_FLAT 4 + +#define SENSOR_X 0 +#define SENSOR_Y 1 +#define SENSOR_Z 2 + +/* Structure to be passed to DMI_MATCH function */ +struct dmi_match_data { +/* Indicates whether this computer has an accelerometer. */ + int accelerometer; +/* Indicates whether this computer has light sensors and keyboard backlight. */ + int light; +/* Indicates which temperature sensors set to use. */ + int temperature_set; +}; + +static const int debug; +static struct platform_device *pdev; +static s16 rest_x; +static s16 rest_y; +static struct timer_list applesmc_timer; +static struct input_dev *applesmc_idev; +static struct class_device *hwmon_class_dev; + +/* Indicates whether this computer has an accelerometer. */ +static unsigned int applesmc_accelerometer; + +/* Indicates whether this computer has light sensors and keyboard backlight. */ +static unsigned int applesmc_light; + +/* Indicates which temperature sensors set to use. */ +static unsigned int applesmc_temperature_set; + +static struct mutex applesmc_lock; + +/* + * Last index written to key_at_index sysfs file, and value to use for all other + * key_at_index_* sysfs files. + */ +static unsigned int key_at_index; + +static struct workqueue_struct *applesmc_led_wq; + +/* + * __wait_status - Wait up to 2ms for the status port to get a certain value + * (masked with 0x0f), returning zero if the value is obtained. Callers must + * hold applesmc_lock. + */ +static int __wait_status(u8 val) +{ + unsigned int i; + + val = val & APPLESMC_STATUS_MASK; + + for (i = 0; i < 200; i++) { + if ((inb(APPLESMC_CMD_PORT) & APPLESMC_STATUS_MASK) == val) { + if (debug) + printk(KERN_DEBUG + "Waited %d us for status %x\n", + i*10, val); + return 0; + } + udelay(10); + } + + printk(KERN_WARNING "applesmc: wait status failed: %x != %x\n", + val, inb(APPLESMC_CMD_PORT)); + + return -EIO; +} + +/* + * applesmc_read_key - reads len bytes from a given key, and put them in buffer. + * Returns zero on success or a negative error on failure. Callers must + * hold applesmc_lock. + */ +static int applesmc_read_key(const char* key, u8* buffer, u8 len) +{ + int i; + + if (len > APPLESMC_MAX_DATA_LENGTH) { + printk(KERN_ERR "applesmc_read_key: cannot read more than " + "%d bytes\n", APPLESMC_MAX_DATA_LENGTH); + return -EINVAL; + } + + outb(APPLESMC_READ_CMD, APPLESMC_CMD_PORT); + if (__wait_status(0x0c)) + return -EIO; + + for (i = 0; i < 4; i++) { + outb(key[i], APPLESMC_DATA_PORT); + if (__wait_status(0x04)) + return -EIO; + } + if (debug) + printk(KERN_DEBUG "<%s", key); + + outb(len, APPLESMC_DATA_PORT); + if (debug) + printk(KERN_DEBUG ">%x", len); + + for (i = 0; i < len; i++) { + if (__wait_status(0x05)) + return -EIO; + buffer[i] = inb(APPLESMC_DATA_PORT); + if (debug) + printk(KERN_DEBUG "<%x", buffer[i]); + } + if (debug) + printk(KERN_DEBUG "\n"); + + return 0; +} + +/* + * applesmc_write_key - writes len bytes from buffer to a given key. + * Returns zero on success or a negative error on failure. Callers must + * hold applesmc_lock. + */ +static int applesmc_write_key(const char* key, u8* buffer, u8 len) +{ + int i; + + if (len > APPLESMC_MAX_DATA_LENGTH) { + printk(KERN_ERR "applesmc_write_key: cannot write more than " + "%d bytes\n", APPLESMC_MAX_DATA_LENGTH); + return -EINVAL; + } + + outb(APPLESMC_WRITE_CMD, APPLESMC_CMD_PORT); + if (__wait_status(0x0c)) + return -EIO; + + for (i = 0; i < 4; i++) { + outb(key[i], APPLESMC_DATA_PORT); + if (__wait_status(0x04)) + return -EIO; + } + + outb(len, APPLESMC_DATA_PORT); + + for (i = 0; i < len; i++) { + if (__wait_status(0x04)) + return -EIO; + outb(buffer[i], APPLESMC_DATA_PORT); + } + + return 0; +} + +/* + * applesmc_get_key_at_index - get key at index, and put the result in key + * (char[6]). Returns zero on success or a negative error on failure. Callers + * must hold applesmc_lock. + */ +static int applesmc_get_key_at_index(int index, char* key) +{ + int i; + u8 readkey[4]; + readkey[0] = index >> 24; + readkey[1] = index >> 16; + readkey[2] = index >> 8; + readkey[3] = index; + + outb(APPLESMC_GET_KEY_BY_INDEX_CMD, APPLESMC_CMD_PORT); + if (__wait_status(0x0c)) + return -EIO; + + for (i = 0; i < 4; i++) { + outb(readkey[i], APPLESMC_DATA_PORT); + if (__wait_status(0x04)) + return -EIO; + } + + outb(4, APPLESMC_DATA_PORT); + + for (i = 0; i < 4; i++) { + if (__wait_status(0x05)) + return -EIO; + key[i] = inb(APPLESMC_DATA_PORT); + } + key[4] = 0; + + return 0; +} + +/* + * applesmc_get_key_type - get key type, and put the result in type (char[6]). + * Returns zero on success or a negative error on failure. Callers must + * hold applesmc_lock. + */ +static int applesmc_get_key_type(char* key, char* type) +{ + int i; + + outb(APPLESMC_GET_KEY_TYPE_CMD, APPLESMC_CMD_PORT); + if (__wait_status(0x0c)) + return -EIO; + + for (i = 0; i < 4; i++) { + outb(key[i], APPLESMC_DATA_PORT); + if (__wait_status(0x04)) + return -EIO; + } + + outb(5, APPLESMC_DATA_PORT); + + for (i = 0; i < 6; i++) { + if (__wait_status(0x05)) + return -EIO; + type[i] = inb(APPLESMC_DATA_PORT); + } + type[5] = 0; + + return 0; +} + +/* + * applesmc_read_motion_sensor - Read motion sensor (X, Y or Z). Callers must + * hold applesmc_lock. + */ +static int applesmc_read_motion_sensor(int index, s16* value) +{ + u8 buffer[2]; + int ret; + + switch (index) { + case SENSOR_X: + ret = applesmc_read_key(MOTION_SENSOR_X_KEY, buffer, 2); + break; + case SENSOR_Y: + ret = applesmc_read_key(MOTION_SENSOR_Y_KEY, buffer, 2); + break; + case SENSOR_Z: + ret = applesmc_read_key(MOTION_SENSOR_Z_KEY, buffer, 2); + break; + default: + ret = -EINVAL; + } + + *value = ((s16)buffer[0] << 8) | buffer[1]; + + return ret; +} + +/* + * applesmc_device_init - initialize the accelerometer. Returns zero on success + * and negative error code on failure. Can sleep. + */ +static int applesmc_device_init(void) +{ + int total, ret = -ENXIO; + u8 buffer[2]; + + if (!applesmc_accelerometer) + return 0; + + mutex_lock(&applesmc_lock); + + for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) { + if (debug) + printk(KERN_DEBUG "applesmc try %d\n", total); + if (!applesmc_read_key(MOTION_SENSOR_KEY, buffer, 2) && + (buffer[0] != 0x00 || buffer[1] != 0x00)) { + if (total == INIT_TIMEOUT_MSECS) { + printk(KERN_DEBUG "applesmc: device has" + " already been initialized" + " (0x%02x, 0x%02x).\n", + buffer[0], buffer[1]); + } else { + printk(KERN_DEBUG "applesmc: device" + " successfully initialized" + " (0x%02x, 0x%02x).\n", + buffer[0], buffer[1]); + } + ret = 0; + goto out; + } + buffer[0] = 0xe0; + buffer[1] = 0x00; + applesmc_write_key(MOTION_SENSOR_KEY, buffer, 2); + msleep(INIT_WAIT_MSECS); + } + + printk(KERN_WARNING "applesmc: failed to init the device\n"); + +out: + mutex_unlock(&applesmc_lock); + return ret; +} + +/* + * applesmc_get_fan_count - get the number of fans. Callers must NOT hold + * applesmc_lock. + */ +static int applesmc_get_fan_count(void) +{ + int ret; + u8 buffer[1]; + + mutex_lock(&applesmc_lock); + + ret = applesmc_read_key(FANS_COUNT, buffer, 1); + + mutex_unlock(&applesmc_lock); + if (ret) + return ret; + else + return buffer[0]; +} + +/* Device model stuff */ +static int applesmc_probe(struct platform_device *dev) +{ + int ret; + + ret = applesmc_device_init(); + if (ret) + return ret; + + printk(KERN_INFO "applesmc: device successfully initialized.\n"); + return 0; +} + +static int applesmc_resume(struct platform_device *dev) +{ + return applesmc_device_init(); +} + +static struct platform_driver applesmc_driver = { + .probe = applesmc_probe, + .resume = applesmc_resume, + .driver = { + .name = "applesmc", + .owner = THIS_MODULE, + }, +}; + +/* + * applesmc_calibrate - Set our "resting" values. Callers must + * hold applesmc_lock. + */ +static void applesmc_calibrate(void) +{ + applesmc_read_motion_sensor(SENSOR_X, &rest_x); + applesmc_read_motion_sensor(SENSOR_Y, &rest_y); + rest_x = -rest_x; +} + +static int applesmc_idev_open(struct input_dev *dev) +{ + add_timer(&applesmc_timer); + + return 0; +} + +static void applesmc_idev_close(struct input_dev *dev) +{ + del_timer_sync(&applesmc_timer); +} + +static void applesmc_idev_poll(unsigned long unused) +{ + s16 x, y; + + /* Cannot sleep. Try nonblockingly. If we fail, try again later. */ + if (!mutex_trylock(&applesmc_lock)) { + mod_timer(&applesmc_timer, jiffies + APPLESMC_POLL_PERIOD); + return; + } + + if (applesmc_read_motion_sensor(SENSOR_X, &x)) + goto out; + if (applesmc_read_motion_sensor(SENSOR_Y, &y)) + goto out; + + x = -x; + input_report_abs(applesmc_idev, ABS_X, x - rest_x); + input_report_abs(applesmc_idev, ABS_Y, y - rest_y); + input_sync(applesmc_idev); + +out: + mod_timer(&applesmc_timer, jiffies + APPLESMC_POLL_PERIOD); + + mutex_unlock(&applesmc_lock); +} + +/* Sysfs Files */ + +static ssize_t applesmc_position_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret; + s16 x, y, z; + + mutex_lock(&applesmc_lock); + + ret = applesmc_read_motion_sensor(SENSOR_X, &x); + if (ret) + goto out; + ret = applesmc_read_motion_sensor(SENSOR_Y, &y); + if (ret) + goto out; + ret = applesmc_read_motion_sensor(SENSOR_Z, &z); + if (ret) + goto out; + +out: + mutex_unlock(&applesmc_lock); + if (ret) + return ret; + else + return snprintf(buf, PAGE_SIZE, "(%d,%d,%d)\n", x, y, z); +} + +static ssize_t applesmc_light_show(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + int ret; + u8 left = 0, right = 0; + u8 buffer[6]; + + mutex_lock(&applesmc_lock); + + ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, buffer, 6); + left = buffer[2]; + if (ret) + goto out; + ret = applesmc_read_key(LIGHT_SENSOR_RIGHT_KEY, buffer, 6); + right = buffer[2]; + +out: + mutex_unlock(&applesmc_lock); + if (ret) + return ret; + else + return snprintf(sysfsbuf, PAGE_SIZE, "(%d,%d)\n", left, right); +} + +/* Displays degree Celsius * 1000 */ +static ssize_t applesmc_show_temperature(struct device *dev, + struct device_attribute *devattr, char *sysfsbuf) +{ + int ret; + u8 buffer[2]; + unsigned int temp; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + const char* key = + temperature_sensors_sets[applesmc_temperature_set][attr->index]; + + mutex_lock(&applesmc_lock); + + ret = applesmc_read_key(key, buffer, 2); + temp = buffer[0]*1000; + temp += (buffer[1] >> 6) * 250; + + mutex_unlock(&applesmc_lock); + + if (ret) + return ret; + else + return snprintf(sysfsbuf, PAGE_SIZE, "%u\n", temp); +} + +static ssize_t applesmc_show_fan_speed(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + int ret; + unsigned int speed = 0; + char newkey[5]; + u8 buffer[2]; + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + + newkey[0] = fan_speed_keys[sensor_attr->nr][0]; + newkey[1] = '0' + sensor_attr->index; + newkey[2] = fan_speed_keys[sensor_attr->nr][2]; + newkey[3] = fan_speed_keys[sensor_attr->nr][3]; + newkey[4] = 0; + + mutex_lock(&applesmc_lock); + + ret = applesmc_read_key(newkey, buffer, 2); + speed = ((buffer[0] << 8 | buffer[1]) >> 2); + + mutex_unlock(&applesmc_lock); + if (ret) + return ret; + else + return snprintf(sysfsbuf, PAGE_SIZE, "%u\n", speed); +} + +static ssize_t applesmc_store_fan_speed(struct device *dev, + struct device_attribute *attr, + const char *sysfsbuf, size_t count) +{ + int ret; + u32 speed; + char newkey[5]; + u8 buffer[2]; + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + + speed = simple_strtoul(sysfsbuf, NULL, 10); + + if (speed > 0x4000) /* Bigger than a 14-bit value */ + return -EINVAL; + + newkey[0] = fan_speed_keys[sensor_attr->nr][0]; + newkey[1] = '0' + sensor_attr->index; + newkey[2] = fan_speed_keys[sensor_attr->nr][2]; + newkey[3] = fan_speed_keys[sensor_attr->nr][3]; + newkey[4] = 0; + + mutex_lock(&applesmc_lock); + + buffer[0] = (speed >> 6) & 0xff; + buffer[1] = (speed << 2) & 0xff; + ret = applesmc_write_key(newkey, buffer, 2); + + mutex_unlock(&applesmc_lock); + if (ret) + return ret; + else + return count; +} + +static ssize_t applesmc_show_fan_manual(struct device *dev, + struct device_attribute *devattr, char *sysfsbuf) +{ + int ret; + u16 manual = 0; + u8 buffer[2]; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + mutex_lock(&applesmc_lock); + + ret = applesmc_read_key(FANS_MANUAL, buffer, 2); + manual = ((buffer[0] << 8 | buffer[1]) >> attr->index) & 0x01; + + mutex_unlock(&applesmc_lock); + if (ret) + return ret; + else + return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", manual); +} + +static ssize_t applesmc_store_fan_manual(struct device *dev, + struct device_attribute *devattr, + const char *sysfsbuf, size_t count) +{ + int ret; + u8 buffer[2]; + u32 input; + u16 val; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + input = simple_strtoul(sysfsbuf, NULL, 10); + + mutex_lock(&applesmc_lock); + + ret = applesmc_read_key(FANS_MANUAL, buffer, 2); + val = (buffer[0] << 8 | buffer[1]); + if (ret) + goto out; + + if (input) + val = val | (0x01 << attr->index); + else + val = val & ~(0x01 << attr->index); + + buffer[0] = (val >> 8) & 0xFF; + buffer[1] = val & 0xFF; + + ret = applesmc_write_key(FANS_MANUAL, buffer, 2); + +out: + mutex_unlock(&applesmc_lock); + if (ret) + return ret; + else + return count; +} + +static ssize_t applesmc_show_fan_position(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + int ret; + char newkey[5]; + u8 buffer[17]; + struct sensor_device_attribute_2 *sensor_attr = + to_sensor_dev_attr_2(attr); + + newkey[0] = FAN_POSITION[0]; + newkey[1] = '0' + sensor_attr->index; + newkey[2] = FAN_POSITION[2]; + newkey[3] = FAN_POSITION[3]; + newkey[4] = 0; + + mutex_lock(&applesmc_lock); + + ret = applesmc_read_key(newkey, buffer, 16); + buffer[16] = 0; + + mutex_unlock(&applesmc_lock); + if (ret) + return ret; + else + return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", buffer+4); +} + +static ssize_t applesmc_calibrate_show(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + return snprintf(sysfsbuf, PAGE_SIZE, "(%d,%d)\n", rest_x, rest_y); +} + +static ssize_t applesmc_calibrate_store(struct device *dev, + struct device_attribute *attr, const char *sysfsbuf, size_t count) +{ + mutex_lock(&applesmc_lock); + applesmc_calibrate(); + mutex_unlock(&applesmc_lock); + + return count; +} + +/* Store the next backlight value to be written by the work */ +static unsigned int backlight_value; + +static void applesmc_backlight_set(struct work_struct *work) +{ + u8 buffer[2]; + + mutex_lock(&applesmc_lock); + buffer[0] = backlight_value; + buffer[1] = 0x00; + applesmc_write_key(BACKLIGHT_KEY, buffer, 2); + mutex_unlock(&applesmc_lock); +} +static DECLARE_WORK(backlight_work, &applesmc_backlight_set); + +static void applesmc_brightness_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + int ret; + + backlight_value = value; + ret = queue_work(applesmc_led_wq, &backlight_work); + + if (debug && (!ret)) + printk(KERN_DEBUG "applesmc: work was already on the queue.\n"); +} + +static ssize_t applesmc_key_count_show(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + int ret; + u8 buffer[4]; + u32 count; + + mutex_lock(&applesmc_lock); + + ret = applesmc_read_key(KEY_COUNT_KEY, buffer, 4); + count = ((u32)buffer[0]<<24) + ((u32)buffer[1]<<16) + + ((u32)buffer[2]<<8) + buffer[3]; + + mutex_unlock(&applesmc_lock); + if (ret) + return ret; + else + return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", count); +} + +static ssize_t applesmc_key_at_index_read_show(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + char key[5]; + char info[6]; + int ret; + + mutex_lock(&applesmc_lock); + + ret = applesmc_get_key_at_index(key_at_index, key); + + if (ret || !key[0]) { + mutex_unlock(&applesmc_lock); + + return -EINVAL; + } + + ret = applesmc_get_key_type(key, info); + + if (ret) { + mutex_unlock(&applesmc_lock); + + return ret; + } + + /* + * info[0] maximum value (APPLESMC_MAX_DATA_LENGTH) is much lower than + * PAGE_SIZE, so we don't need any checks before writing to sysfsbuf. + */ + ret = applesmc_read_key(key, sysfsbuf, info[0]); + + mutex_unlock(&applesmc_lock); + + if (!ret) { + return info[0]; + } + else { + return ret; + } +} + +static ssize_t applesmc_key_at_index_data_length_show(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + char key[5]; + char info[6]; + int ret; + + mutex_lock(&applesmc_lock); + + ret = applesmc_get_key_at_index(key_at_index, key); + + if (ret || !key[0]) { + mutex_unlock(&applesmc_lock); + + return -EINVAL; + } + + ret = applesmc_get_key_type(key, info); + + mutex_unlock(&applesmc_lock); + + if (!ret) + return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", info[0]); + else + return ret; +} + +static ssize_t applesmc_key_at_index_type_show(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + char key[5]; + char info[6]; + int ret; + + mutex_lock(&applesmc_lock); + + ret = applesmc_get_key_at_index(key_at_index, key); + + if (ret || !key[0]) { + mutex_unlock(&applesmc_lock); + + return -EINVAL; + } + + ret = applesmc_get_key_type(key, info); + + mutex_unlock(&applesmc_lock); + + if (!ret) + return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", info+1); + else + return ret; +} + +static ssize_t applesmc_key_at_index_name_show(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + char key[5]; + int ret; + + mutex_lock(&applesmc_lock); + + ret = applesmc_get_key_at_index(key_at_index, key); + + mutex_unlock(&applesmc_lock); + + if (!ret && key[0]) + return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", key); + else + return -EINVAL; +} + +static ssize_t applesmc_key_at_index_show(struct device *dev, + struct device_attribute *attr, char *sysfsbuf) +{ + return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", key_at_index); +} + +static ssize_t applesmc_key_at_index_store(struct device *dev, + struct device_attribute *attr, const char *sysfsbuf, size_t count) +{ + mutex_lock(&applesmc_lock); + + key_at_index = simple_strtoul(sysfsbuf, NULL, 10); + + mutex_unlock(&applesmc_lock); + + return count; +} + +static struct led_classdev applesmc_backlight = { + .name = "smc:kbd_backlight", + .default_trigger = "nand-disk", + .brightness_set = applesmc_brightness_set, +}; + +static DEVICE_ATTR(position, 0444, applesmc_position_show, NULL); +static DEVICE_ATTR(calibrate, 0644, + applesmc_calibrate_show, applesmc_calibrate_store); + +static struct attribute *accelerometer_attributes[] = { + &dev_attr_position.attr, + &dev_attr_calibrate.attr, + NULL +}; + +static const struct attribute_group accelerometer_attributes_group = + { .attrs = accelerometer_attributes }; + +static DEVICE_ATTR(light, 0444, applesmc_light_show, NULL); + +static DEVICE_ATTR(key_count, 0444, applesmc_key_count_show, NULL); +static DEVICE_ATTR(key_at_index, 0644, + applesmc_key_at_index_show, applesmc_key_at_index_store); +static DEVICE_ATTR(key_at_index_name, 0444, + applesmc_key_at_index_name_show, NULL); +static DEVICE_ATTR(key_at_index_type, 0444, + applesmc_key_at_index_type_show, NULL); +static DEVICE_ATTR(key_at_index_data_length, 0444, + applesmc_key_at_index_data_length_show, NULL); +static DEVICE_ATTR(key_at_index_data, 0444, + applesmc_key_at_index_read_show, NULL); + +static struct attribute *key_enumeration_attributes[] = { + &dev_attr_key_count.attr, + &dev_attr_key_at_index.attr, + &dev_attr_key_at_index_name.attr, + &dev_attr_key_at_index_type.attr, + &dev_attr_key_at_index_data_length.attr, + &dev_attr_key_at_index_data.attr, + NULL +}; + +static const struct attribute_group key_enumeration_group = + { .attrs = key_enumeration_attributes }; + +/* + * Macro defining SENSOR_DEVICE_ATTR for a fan sysfs entries. + * - show actual speed + * - show/store minimum speed + * - show maximum speed + * - show safe speed + * - show/store target speed + * - show/store manual mode + */ +#define sysfs_fan_speeds_offset(offset) \ +static SENSOR_DEVICE_ATTR_2(fan##offset##_input, S_IRUGO, \ + applesmc_show_fan_speed, NULL, 0, offset-1); \ +\ +static SENSOR_DEVICE_ATTR_2(fan##offset##_min, S_IRUGO | S_IWUSR, \ + applesmc_show_fan_speed, applesmc_store_fan_speed, 1, offset-1); \ +\ +static SENSOR_DEVICE_ATTR_2(fan##offset##_max, S_IRUGO, \ + applesmc_show_fan_speed, NULL, 2, offset-1); \ +\ +static SENSOR_DEVICE_ATTR_2(fan##offset##_safe, S_IRUGO, \ + applesmc_show_fan_speed, NULL, 3, offset-1); \ +\ +static SENSOR_DEVICE_ATTR_2(fan##offset##_output, S_IRUGO | S_IWUSR, \ + applesmc_show_fan_speed, applesmc_store_fan_speed, 4, offset-1); \ +\ +static SENSOR_DEVICE_ATTR(fan##offset##_manual, S_IRUGO | S_IWUSR, \ + applesmc_show_fan_manual, applesmc_store_fan_manual, offset-1); \ +\ +static SENSOR_DEVICE_ATTR(fan##offset##_position, S_IRUGO, \ + applesmc_show_fan_position, NULL, offset-1); \ +\ +static struct attribute *fan##offset##_attributes[] = { \ + &sensor_dev_attr_fan##offset##_input.dev_attr.attr, \ + &sensor_dev_attr_fan##offset##_min.dev_attr.attr, \ + &sensor_dev_attr_fan##offset##_max.dev_attr.attr, \ + &sensor_dev_attr_fan##offset##_safe.dev_attr.attr, \ + &sensor_dev_attr_fan##offset##_output.dev_attr.attr, \ + &sensor_dev_attr_fan##offset##_manual.dev_attr.attr, \ + &sensor_dev_attr_fan##offset##_position.dev_attr.attr, \ + NULL \ +}; + +/* + * Create the needed functions for each fan using the macro defined above + * (2 fans are supported) + */ +sysfs_fan_speeds_offset(1); +sysfs_fan_speeds_offset(2); + +static const struct attribute_group fan_attribute_groups[] = { + { .attrs = fan1_attributes }, + { .attrs = fan2_attributes } +}; + +/* + * Temperature sensors sysfs entries. + */ +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, + applesmc_show_temperature, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, + applesmc_show_temperature, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, + applesmc_show_temperature, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, + applesmc_show_temperature, NULL, 3); +static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, + applesmc_show_temperature, NULL, 4); +static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, + applesmc_show_temperature, NULL, 5); +static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, + applesmc_show_temperature, NULL, 6); +static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, + applesmc_show_temperature, NULL, 7); +static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, + applesmc_show_temperature, NULL, 8); +static SENSOR_DEVICE_ATTR(temp10_input, S_IRUGO, + applesmc_show_temperature, NULL, 9); +static SENSOR_DEVICE_ATTR(temp11_input, S_IRUGO, + applesmc_show_temperature, NULL, 10); +static SENSOR_DEVICE_ATTR(temp12_input, S_IRUGO, + applesmc_show_temperature, NULL, 11); + +static struct attribute *temperature_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp5_input.dev_attr.attr, + &sensor_dev_attr_temp6_input.dev_attr.attr, + &sensor_dev_attr_temp7_input.dev_attr.attr, + &sensor_dev_attr_temp8_input.dev_attr.attr, + &sensor_dev_attr_temp9_input.dev_attr.attr, + &sensor_dev_attr_temp10_input.dev_attr.attr, + &sensor_dev_attr_temp11_input.dev_attr.attr, + &sensor_dev_attr_temp12_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group temperature_attributes_group = + { .attrs = temperature_attributes }; + +/* Module stuff */ + +/* + * applesmc_dmi_match - found a match. return one, short-circuiting the hunt. + */ +static int applesmc_dmi_match(struct dmi_system_id *id) +{ + int i = 0; + struct dmi_match_data* dmi_data = id->driver_data; + printk(KERN_INFO "applesmc: %s detected:\n", id->ident); + applesmc_accelerometer = dmi_data->accelerometer; + printk(KERN_INFO "applesmc: - Model %s accelerometer\n", + applesmc_accelerometer ? "with" : "without"); + applesmc_light = dmi_data->light; + printk(KERN_INFO "applesmc: - Model %s light sensors and backlight\n", + applesmc_light ? "with" : "without"); + + applesmc_temperature_set = dmi_data->temperature_set; + while (temperature_sensors_sets[applesmc_temperature_set][i] != NULL) + i++; + printk(KERN_INFO "applesmc: - Model with %d temperature sensors\n", i); + return 1; +} + +/* Create accelerometer ressources */ +static int applesmc_create_accelerometer(void) +{ + int ret; + + ret = sysfs_create_group(&pdev->dev.kobj, + &accelerometer_attributes_group); + if (ret) + goto out; + + applesmc_idev = input_allocate_device(); + if (!applesmc_idev) { + ret = -ENOMEM; + goto out_sysfs; + } + + /* initial calibrate for the input device */ + applesmc_calibrate(); + + /* initialize the input class */ + applesmc_idev->name = "applesmc"; + applesmc_idev->id.bustype = BUS_HOST; + applesmc_idev->cdev.dev = &pdev->dev; + applesmc_idev->evbit[0] = BIT(EV_ABS); + applesmc_idev->open = applesmc_idev_open; + applesmc_idev->close = applesmc_idev_close; + input_set_abs_params(applesmc_idev, ABS_X, + -256, 256, APPLESMC_INPUT_FUZZ, APPLESMC_INPUT_FLAT); + input_set_abs_params(applesmc_idev, ABS_Y, + -256, 256, APPLESMC_INPUT_FUZZ, APPLESMC_INPUT_FLAT); + + ret = input_register_device(applesmc_idev); + if (ret) + goto out_idev; + + /* start up our timer for the input device */ + init_timer(&applesmc_timer); + applesmc_timer.function = applesmc_idev_poll; + applesmc_timer.expires = jiffies + APPLESMC_POLL_PERIOD; + + return 0; + +out_idev: + input_free_device(applesmc_idev); + +out_sysfs: + sysfs_remove_group(&pdev->dev.kobj, &accelerometer_attributes_group); + +out: + printk(KERN_WARNING "applesmc: driver init failed (ret=%d)!\n", ret); + return ret; +} + +/* Release all ressources used by the accelerometer */ +static void applesmc_release_accelerometer(void) +{ + del_timer_sync(&applesmc_timer); + input_unregister_device(applesmc_idev); + sysfs_remove_group(&pdev->dev.kobj, &accelerometer_attributes_group); +} + +static __initdata struct dmi_match_data applesmc_dmi_data[] = { +/* MacBook Pro: accelerometer, backlight and temperature set 0 */ + { .accelerometer = 1, .light = 1, .temperature_set = 0 }, +/* MacBook: accelerometer and temperature set 0 */ + { .accelerometer = 1, .light = 0, .temperature_set = 0 }, +/* MacBook: temperature set 1 */ + { .accelerometer = 0, .light = 0, .temperature_set = 1 } +}; + +/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". + * So we need to put "Apple MacBook Pro" before "Apple MacBook". */ +static __initdata struct dmi_system_id applesmc_whitelist[] = { + { applesmc_dmi_match, "Apple MacBook Pro", { + DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), + DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") }, + (void*)&applesmc_dmi_data[0]}, + { applesmc_dmi_match, "Apple MacBook", { + DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), + DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") }, + (void*)&applesmc_dmi_data[1]}, + { applesmc_dmi_match, "Apple Macmini", { + DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), + DMI_MATCH(DMI_PRODUCT_NAME,"Macmini") }, + (void*)&applesmc_dmi_data[2]}, + { .ident = NULL } +}; + +static int __init applesmc_init(void) +{ + int ret; + int count; + int i; + + mutex_init(&applesmc_lock); + + if (!dmi_check_system(applesmc_whitelist)) { + printk(KERN_WARNING "applesmc: supported laptop not found!\n"); + ret = -ENODEV; + goto out; + } + + if (!request_region(APPLESMC_DATA_PORT, APPLESMC_NR_PORTS, + "applesmc")) { + ret = -ENXIO; + goto out; + } + + ret = platform_driver_register(&applesmc_driver); + if (ret) + goto out_region; + + pdev = platform_device_register_simple("applesmc", -1, NULL, 0); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + goto out_driver; + } + + /* Create key enumeration sysfs files */ + ret = sysfs_create_group(&pdev->dev.kobj, &key_enumeration_group); + if (ret) + goto out_device; + + /* create fan files */ + count = applesmc_get_fan_count(); + if (count < 0) { + printk(KERN_ERR "applesmc: Cannot get the number of fans.\n"); + } else { + printk(KERN_INFO "applesmc: %d fans found.\n", count); + + switch (count) { + default: + printk(KERN_WARNING "applesmc: More than 2 fans found," + " but at most 2 fans are supported" + " by the driver.\n"); + case 2: + ret = sysfs_create_group(&pdev->dev.kobj, + &fan_attribute_groups[1]); + if (ret) + goto out_key_enumeration; + case 1: + ret = sysfs_create_group(&pdev->dev.kobj, + &fan_attribute_groups[0]); + if (ret) + goto out_fan_1; + case 0: + ; + } + } + + for (i = 0; + temperature_sensors_sets[applesmc_temperature_set][i] != NULL; + i++) { + if (temperature_attributes[i] == NULL) { + printk(KERN_ERR "applesmc: More temperature sensors " + "in temperature_sensors_sets (at least %i)" + "than available sysfs files in " + "temperature_attributes (%i), please report " + "this bug.\n", i, i-1); + goto out_temperature; + } + ret = sysfs_create_file(&pdev->dev.kobj, + temperature_attributes[i]); + if (ret) + goto out_temperature; + } + + if (applesmc_accelerometer) { + ret = applesmc_create_accelerometer(); + if (ret) + goto out_temperature; + } + + if (applesmc_light) { + /* Add light sensor file */ + ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_light.attr); + if (ret) + goto out_accelerometer; + + /* Create the workqueue */ + applesmc_led_wq = create_singlethread_workqueue("applesmc-led"); + if (!applesmc_led_wq) { + ret = -ENOMEM; + goto out_light_sysfs; + } + + /* register as a led device */ + ret = led_classdev_register(&pdev->dev, &applesmc_backlight); + if (ret < 0) + goto out_light_wq; + } + + hwmon_class_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon_class_dev)) { + ret = PTR_ERR(hwmon_class_dev); + goto out_light_ledclass; + } + + printk(KERN_INFO "applesmc: driver successfully loaded.\n"); + + return 0; + +out_light_ledclass: + if (applesmc_light) + led_classdev_unregister(&applesmc_backlight); +out_light_wq: + if (applesmc_light) + destroy_workqueue(applesmc_led_wq); +out_light_sysfs: + if (applesmc_light) + sysfs_remove_file(&pdev->dev.kobj, &dev_attr_light.attr); +out_accelerometer: + if (applesmc_accelerometer) + applesmc_release_accelerometer(); +out_temperature: + sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group); + sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[0]); +out_fan_1: + sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[1]); +out_key_enumeration: + sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group); +out_device: + platform_device_unregister(pdev); +out_driver: + platform_driver_unregister(&applesmc_driver); +out_region: + release_region(APPLESMC_DATA_PORT, APPLESMC_NR_PORTS); +out: + printk(KERN_WARNING "applesmc: driver init failed (ret=%d)!\n", ret); + return ret; +} + +static void __exit applesmc_exit(void) +{ + hwmon_device_unregister(hwmon_class_dev); + if (applesmc_light) { + led_classdev_unregister(&applesmc_backlight); + destroy_workqueue(applesmc_led_wq); + sysfs_remove_file(&pdev->dev.kobj, &dev_attr_light.attr); + } + if (applesmc_accelerometer) + applesmc_release_accelerometer(); + sysfs_remove_group(&pdev->dev.kobj, &temperature_attributes_group); + sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[0]); + sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[1]); + sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group); + platform_device_unregister(pdev); + platform_driver_unregister(&applesmc_driver); + release_region(APPLESMC_DATA_PORT, APPLESMC_NR_PORTS); + + printk(KERN_INFO "applesmc: driver unloaded.\n"); +} + +module_init(applesmc_init); +module_exit(applesmc_exit); + +MODULE_AUTHOR("Nicolas Boichat"); +MODULE_DESCRIPTION("Apple SMC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index bf759ea545ac..f82fa2d23f95 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -30,10 +30,12 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/kernel.h> +#include <linux/mutex.h> #include <linux/module.h> #include <linux/timer.h> #include <linux/dmi.h> #include <linux/jiffies.h> + #include <asm/io.h> #define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */ @@ -71,10 +73,10 @@ static u8 km_activity; static int rest_x; static int rest_y; -static DECLARE_MUTEX(hdaps_sem); +static DEFINE_MUTEX(hdaps_mtx); /* - * __get_latch - Get the value from a given port. Callers must hold hdaps_sem. + * __get_latch - Get the value from a given port. Callers must hold hdaps_mtx. */ static inline u8 __get_latch(u16 port) { @@ -83,7 +85,7 @@ static inline u8 __get_latch(u16 port) /* * __check_latch - Check a port latch for a given value. Returns zero if the - * port contains the given value. Callers must hold hdaps_sem. + * port contains the given value. Callers must hold hdaps_mtx. */ static inline int __check_latch(u16 port, u8 val) { @@ -94,7 +96,7 @@ static inline int __check_latch(u16 port, u8 val) /* * __wait_latch - Wait up to 100us for a port latch to get a certain value, - * returning zero if the value is obtained. Callers must hold hdaps_sem. + * returning zero if the value is obtained. Callers must hold hdaps_mtx. */ static int __wait_latch(u16 port, u8 val) { @@ -111,7 +113,7 @@ static int __wait_latch(u16 port, u8 val) /* * __device_refresh - request a refresh from the accelerometer. Does not wait - * for refresh to complete. Callers must hold hdaps_sem. + * for refresh to complete. Callers must hold hdaps_mtx. */ static void __device_refresh(void) { @@ -125,7 +127,7 @@ static void __device_refresh(void) /* * __device_refresh_sync - request a synchronous refresh from the * accelerometer. We wait for the refresh to complete. Returns zero if - * successful and nonzero on error. Callers must hold hdaps_sem. + * successful and nonzero on error. Callers must hold hdaps_mtx. */ static int __device_refresh_sync(void) { @@ -135,7 +137,7 @@ static int __device_refresh_sync(void) /* * __device_complete - indicate to the accelerometer that we are done reading - * data, and then initiate an async refresh. Callers must hold hdaps_sem. + * data, and then initiate an async refresh. Callers must hold hdaps_mtx. */ static inline void __device_complete(void) { @@ -153,7 +155,7 @@ static int hdaps_readb_one(unsigned int port, u8 *val) { int ret; - down(&hdaps_sem); + mutex_lock(&hdaps_mtx); /* do a sync refresh -- we need to be sure that we read fresh data */ ret = __device_refresh_sync(); @@ -164,7 +166,7 @@ static int hdaps_readb_one(unsigned int port, u8 *val) __device_complete(); out: - up(&hdaps_sem); + mutex_unlock(&hdaps_mtx); return ret; } @@ -199,9 +201,9 @@ static int hdaps_read_pair(unsigned int port1, unsigned int port2, { int ret; - down(&hdaps_sem); + mutex_lock(&hdaps_mtx); ret = __hdaps_read_pair(port1, port2, val1, val2); - up(&hdaps_sem); + mutex_unlock(&hdaps_mtx); return ret; } @@ -214,7 +216,7 @@ static int hdaps_device_init(void) { int total, ret = -ENXIO; - down(&hdaps_sem); + mutex_lock(&hdaps_mtx); outb(0x13, 0x1610); outb(0x01, 0x161f); @@ -280,7 +282,7 @@ static int hdaps_device_init(void) } out: - up(&hdaps_sem); + mutex_unlock(&hdaps_mtx); return ret; } @@ -314,7 +316,7 @@ static struct platform_driver hdaps_driver = { }; /* - * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_sem. + * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_mtx. */ static void hdaps_calibrate(void) { @@ -326,7 +328,7 @@ static void hdaps_mousedev_poll(unsigned long unused) int x, y; /* Cannot sleep. Try nonblockingly. If we fail, try again later. */ - if (down_trylock(&hdaps_sem)) { + if (mutex_trylock(&hdaps_mtx)) { mod_timer(&hdaps_timer,jiffies + HDAPS_POLL_PERIOD); return; } @@ -341,7 +343,7 @@ static void hdaps_mousedev_poll(unsigned long unused) mod_timer(&hdaps_timer, jiffies + HDAPS_POLL_PERIOD); out: - up(&hdaps_sem); + mutex_unlock(&hdaps_mtx); } @@ -421,9 +423,9 @@ static ssize_t hdaps_calibrate_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - down(&hdaps_sem); + mutex_lock(&hdaps_mtx); hdaps_calibrate(); - up(&hdaps_sem); + mutex_unlock(&hdaps_mtx); return count; } diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 8c953707253f..039a07fde908 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -175,6 +175,7 @@ static void i2c_parport_attach (struct parport *port) } adapter->algo_data.data = port; adapter->adapter.algo_data = &adapter->algo_data; + adapter->adapter.dev.parent = port->physport->dev; if (parport_claim_or_block(adapter->pdev) < 0) { printk(KERN_ERR "i2c-parport: Could not claim parallel port\n"); diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 0db56e7bc34e..0d6bd4f7b7fa 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -28,7 +28,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/i2c.h> -#include <linux/smp_lock.h> #include <linux/pci.h> #include <linux/delay.h> #include <linux/mutex.h> diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index cb4fa9bef8cd..e7a709710592 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -30,7 +30,6 @@ #include <linux/module.h> #include <linux/fs.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/list.h> #include <linux/i2c.h> diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 2da5cbb53566..2cdd629c653d 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -395,7 +395,7 @@ static void __devinit apple_kiwi_init(struct pci_dev *pdev) unsigned int class_rev = 0; u8 conf; - if (np == NULL || !device_is_compatible(np, "kiwi-root")) + if (np == NULL || !of_device_is_compatible(np, "kiwi-root")) return; pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 071a030ec26e..a49ebe44babd 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1157,32 +1157,32 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; - if (device_is_compatible(np, "shasta-ata")) + if (of_device_is_compatible(np, "shasta-ata")) pmif->kind = controller_sh_ata6; - else if (device_is_compatible(np, "kauai-ata")) + else if (of_device_is_compatible(np, "kauai-ata")) pmif->kind = controller_un_ata6; - else if (device_is_compatible(np, "K2-UATA")) + else if (of_device_is_compatible(np, "K2-UATA")) pmif->kind = controller_k2_ata6; - else if (device_is_compatible(np, "keylargo-ata")) { + else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) pmif->kind = controller_kl_ata4; else pmif->kind = controller_kl_ata3; - } else if (device_is_compatible(np, "heathrow-ata")) + } else if (of_device_is_compatible(np, "heathrow-ata")) pmif->kind = controller_heathrow; else { pmif->kind = controller_ohare; pmif->broken_dma = 1; } - bidp = get_property(np, "AAPL,bus-id", NULL); + bidp = of_get_property(np, "AAPL,bus-id", NULL); pmif->aapl_bus_id = bidp ? *bidp : 0; /* Get cable type from device-tree */ if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6 || pmif->kind == controller_k2_ata6 || pmif->kind == controller_sh_ata6) { - const char* cable = get_property(np, "cable-type", NULL); + const char* cable = of_get_property(np, "cable-type", NULL); if (cable && !strncmp(cable, "80-", 3)) pmif->cable_80 = 1; } @@ -1190,8 +1190,8 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) * they have a 80 conductor cable, this seem to be always the case unless * the user mucked around */ - if (device_is_compatible(np, "K2-UATA") || - device_is_compatible(np, "shasta-ata")) + if (of_device_is_compatible(np, "K2-UATA") || + of_device_is_compatible(np, "shasta-ata")) pmif->cable_80 = 1; /* On Kauai-type controllers, we make sure the FCR is correct */ diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c index 026e38face5c..208141377612 100644 --- a/drivers/ieee1394/dv1394.c +++ b/drivers/ieee1394/dv1394.c @@ -94,7 +94,6 @@ #include <linux/pci.h> #include <linux/fs.h> #include <linux/poll.h> -#include <linux/smp_lock.h> #include <linux/mutex.h> #include <linux/bitops.h> #include <asm/byteorder.h> diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index c6aefd9ad0e8..d382500f4210 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -35,7 +35,6 @@ #include <linux/poll.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/interrupt.h> #include <linux/vmalloc.h> #include <linux/cdev.h> diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c index 95ca26d75272..87ebd0846c34 100644 --- a/drivers/ieee1394/video1394.c +++ b/drivers/ieee1394/video1394.c @@ -39,7 +39,6 @@ #include <linux/pci.h> #include <linux/fs.h> #include <linux/poll.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <linux/bitops.h> #include <linux/types.h> diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 2d370543e96d..fe90e7454560 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -570,7 +570,7 @@ static int __devinit ehca_probe(struct ibmebus_dev *dev, struct ib_pd *ibpd; int ret; - handle = get_property(dev->ofdev.node, "ibm,hca-handle", NULL); + handle = of_get_property(dev->ofdev.node, "ibm,hca-handle", NULL); if (!handle) { ehca_gen_err("Cannot get eHCA handle for adapter: %s.", dev->ofdev.node->full_name); diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c index 036ed1ef1796..ebd5c7bd2cdb 100644 --- a/drivers/infiniband/hw/ipath/ipath_fs.c +++ b/drivers/infiniband/hw/ipath/ipath_fs.c @@ -523,7 +523,7 @@ static int ipathfs_fill_super(struct super_block *sb, void *data, int ret; static struct tree_descr files[] = { - [1] = {"atomic_stats", &atomic_stats_ops, S_IRUGO}, + [2] = {"atomic_stats", &atomic_stats_ops, S_IRUGO}, {""}, }; diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index 89d6008bb673..3702e2375553 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -35,7 +35,6 @@ #include <asm/io.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <linux/version.h> diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 96232313b1b9..0e9b69535ad6 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -153,6 +153,8 @@ source "drivers/input/mouse/Kconfig" source "drivers/input/joystick/Kconfig" +source "drivers/input/tablet/Kconfig" + source "drivers/input/touchscreen/Kconfig" source "drivers/input/misc/Kconfig" diff --git a/drivers/input/Makefile b/drivers/input/Makefile index b4cd10653c4f..8a2dd987546c 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_INPUT_EVBUG) += evbug.o obj-$(CONFIG_INPUT_KEYBOARD) += keyboard/ obj-$(CONFIG_INPUT_MOUSE) += mouse/ obj-$(CONFIG_INPUT_JOYSTICK) += joystick/ +obj-$(CONFIG_INPUT_TABLET) += tablet/ obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/ obj-$(CONFIG_INPUT_MISC) += misc/ diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 1f6fcec0c6fc..55a72592704c 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -18,7 +18,6 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/major.h> -#include <linux/smp_lock.h> #include <linux/device.h> #include <linux/compat.h> @@ -512,7 +511,7 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd, if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0,0))) { - long *bits; + unsigned long *bits; int len; switch (_IOC_NR(cmd) & EV_MAX) { @@ -557,7 +556,7 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd, if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCGABS(0))) { - int t = _IOC_NR(cmd) & ABS_MAX; + t = _IOC_NR(cmd) & ABS_MAX; abs.value = dev->abs[t]; abs.minimum = dev->absmin[t]; @@ -577,7 +576,7 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd, if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) { - int t = _IOC_NR(cmd) & ABS_MAX; + t = _IOC_NR(cmd) & ABS_MAX; if (copy_from_user(&abs, p, sizeof(struct input_absinfo))) return -EFAULT; diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index 783b3412cead..eebc72465fc9 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -281,7 +281,8 @@ int input_ff_event(struct input_dev *dev, unsigned int type, break; default: - ff->playback(dev, code, value); + if (check_effect_access(ff, code, NULL) == 0) + ff->playback(dev, code, value); break; } diff --git a/drivers/input/input.c b/drivers/input/input.c index 915e9ab7cab0..ccd8abafcb70 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -11,7 +11,6 @@ */ #include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/input.h> #include <linux/module.h> #include <linux/random.h> diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 9bcc5425049b..06f0541b24da 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -24,7 +24,6 @@ #include <linux/module.h> #include <linux/poll.h> #include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/device.h> MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 271263443c37..82f563e24fdb 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -2,7 +2,7 @@ # Joystick driver configuration # menuconfig INPUT_JOYSTICK - bool "Joysticks" + bool "Joysticks/Gamepads" help If you have a joystick, 6dof controller, gamepad, steering wheel, weapon control system or something like that you can say Y here @@ -196,7 +196,7 @@ config JOYSTICK_TWIDJOY config JOYSTICK_DB9 tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" depends on PARPORT - ---help--- + help Say Y here if you have a Sega Master System gamepad, Sega Genesis gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick connected to your parallel port. @@ -253,4 +253,18 @@ config JOYSTICK_JOYDUMP To compile this driver as a module, choose M here: the module will be called joydump. +config JOYSTICK_XPAD + tristate "X-Box gamepad support" + select USB + help + Say Y here if you want to use the X-Box pad with your computer. + Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV) + and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. + + For information about how to connect the X-Box pad to USB, see + <file:Documentation/input/xpad.txt>. + + To compile this driver as a module, choose M here: the + module will be called xpad. + endif diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index 5231f6ff75b8..e855abb0cc51 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -26,5 +26,6 @@ obj-$(CONFIG_JOYSTICK_TMDC) += tmdc.o obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o +obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o obj-$(CONFIG_JOYSTICK_IFORCE) += iforce/ diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c index 1c1afb5d4684..bdd157c1ebf8 100644 --- a/drivers/input/joystick/analog.c +++ b/drivers/input/joystick/analog.c @@ -53,7 +53,7 @@ MODULE_LICENSE("GPL"); #define ANALOG_PORTS 16 static char *js[ANALOG_PORTS]; -static int js_nargs; +static unsigned int js_nargs; static int analog_options[ANALOG_PORTS]; module_param_array_named(map, js, charp, &js_nargs, 0); MODULE_PARM_DESC(map, "Describes analog joysticks type/capabilities"); diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c index c27593bf9978..86ad1027e12a 100644 --- a/drivers/input/joystick/db9.c +++ b/drivers/input/joystick/db9.c @@ -46,17 +46,17 @@ MODULE_LICENSE("GPL"); struct db9_config { int args[2]; - int nargs; + unsigned int nargs; }; #define DB9_MAX_PORTS 3 -static struct db9_config db9[DB9_MAX_PORTS] __initdata; +static struct db9_config db9_cfg[DB9_MAX_PORTS] __initdata; -module_param_array_named(dev, db9[0].args, int, &db9[0].nargs, 0); +module_param_array_named(dev, db9_cfg[0].args, int, &db9_cfg[0].nargs, 0); MODULE_PARM_DESC(dev, "Describes first attached device (<parport#>,<type>)"); -module_param_array_named(dev2, db9[1].args, int, &db9[0].nargs, 0); +module_param_array_named(dev2, db9_cfg[1].args, int, &db9_cfg[0].nargs, 0); MODULE_PARM_DESC(dev2, "Describes second attached device (<parport#>,<type>)"); -module_param_array_named(dev3, db9[2].args, int, &db9[2].nargs, 0); +module_param_array_named(dev3, db9_cfg[2].args, int, &db9_cfg[2].nargs, 0); MODULE_PARM_DESC(dev3, "Describes third attached device (<parport#>,<type>)"); #define DB9_ARG_PARPORT 0 @@ -680,17 +680,17 @@ static int __init db9_init(void) int err = 0; for (i = 0; i < DB9_MAX_PORTS; i++) { - if (db9[i].nargs == 0 || db9[i].args[DB9_ARG_PARPORT] < 0) + if (db9_cfg[i].nargs == 0 || db9_cfg[i].args[DB9_ARG_PARPORT] < 0) continue; - if (db9[i].nargs < 2) { + if (db9_cfg[i].nargs < 2) { printk(KERN_ERR "db9.c: Device type must be specified.\n"); err = -EINVAL; break; } - db9_base[i] = db9_probe(db9[i].args[DB9_ARG_PARPORT], - db9[i].args[DB9_ARG_MODE]); + db9_base[i] = db9_probe(db9_cfg[i].args[DB9_ARG_PARPORT], + db9_cfg[i].args[DB9_ARG_MODE]); if (IS_ERR(db9_base[i])) { err = PTR_ERR(db9_base[i]); break; diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index c71b58fe225d..1a452e0e5f25 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -48,16 +48,16 @@ MODULE_LICENSE("GPL"); struct gc_config { int args[GC_MAX_DEVICES + 1]; - int nargs; + unsigned int nargs; }; -static struct gc_config gc[GC_MAX_PORTS] __initdata; +static struct gc_config gc_cfg[GC_MAX_PORTS] __initdata; -module_param_array_named(map, gc[0].args, int, &gc[0].nargs, 0); +module_param_array_named(map, gc_cfg[0].args, int, &gc_cfg[0].nargs, 0); MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<pad1>,<pad2>,..<pad5>)"); -module_param_array_named(map2, gc[1].args, int, &gc[1].nargs, 0); +module_param_array_named(map2, gc_cfg[1].args, int, &gc_cfg[1].nargs, 0); MODULE_PARM_DESC(map2, "Describes second set of devices"); -module_param_array_named(map3, gc[2].args, int, &gc[2].nargs, 0); +module_param_array_named(map3, gc_cfg[2].args, int, &gc_cfg[2].nargs, 0); MODULE_PARM_DESC(map3, "Describes third set of devices"); /* see also gs_psx_delay parameter in PSX support section */ @@ -810,16 +810,17 @@ static int __init gc_init(void) int err = 0; for (i = 0; i < GC_MAX_PORTS; i++) { - if (gc[i].nargs == 0 || gc[i].args[0] < 0) + if (gc_cfg[i].nargs == 0 || gc_cfg[i].args[0] < 0) continue; - if (gc[i].nargs < 2) { + if (gc_cfg[i].nargs < 2) { printk(KERN_ERR "gamecon.c: at least one device must be specified\n"); err = -EINVAL; break; } - gc_base[i] = gc_probe(gc[i].args[0], gc[i].args + 1, gc[i].nargs - 1); + gc_base[i] = gc_probe(gc_cfg[i].args[0], + gc_cfg[i].args + 1, gc_cfg[i].nargs - 1); if (IS_ERR(gc_base[i])) { err = PTR_ERR(gc_base[i]); break; diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index dadcf4fb92ae..40a853ac21c7 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -124,7 +124,7 @@ struct iforce { /* Buffer used for asynchronous sending of bytes to the device */ struct circ_buf xmit; unsigned char xmit_data[XMIT_SIZE]; - long xmit_flags[1]; + unsigned long xmit_flags[1]; /* Force Feedback */ wait_queue_head_t wait; diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c index 0f2c60823b0b..8381c6f14373 100644 --- a/drivers/input/joystick/turbografx.c +++ b/drivers/input/joystick/turbografx.c @@ -48,16 +48,16 @@ MODULE_LICENSE("GPL"); struct tgfx_config { int args[TGFX_MAX_DEVICES + 1]; - int nargs; + unsigned int nargs; }; -static struct tgfx_config tgfx[TGFX_MAX_PORTS] __initdata; +static struct tgfx_config tgfx_cfg[TGFX_MAX_PORTS] __initdata; -module_param_array_named(map, tgfx[0].args, int, &tgfx[0].nargs, 0); +module_param_array_named(map, tgfx_cfg[0].args, int, &tgfx_cfg[0].nargs, 0); MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<js1>,<js2>,..<js7>"); -module_param_array_named(map2, tgfx[1].args, int, &tgfx[1].nargs, 0); +module_param_array_named(map2, tgfx_cfg[1].args, int, &tgfx_cfg[1].nargs, 0); MODULE_PARM_DESC(map2, "Describes second set of devices"); -module_param_array_named(map3, tgfx[2].args, int, &tgfx[2].nargs, 0); +module_param_array_named(map3, tgfx_cfg[2].args, int, &tgfx_cfg[2].nargs, 0); MODULE_PARM_DESC(map3, "Describes third set of devices"); #define TGFX_REFRESH_TIME HZ/100 /* 10 ms */ @@ -283,16 +283,18 @@ static int __init tgfx_init(void) int err = 0; for (i = 0; i < TGFX_MAX_PORTS; i++) { - if (tgfx[i].nargs == 0 || tgfx[i].args[0] < 0) + if (tgfx_cfg[i].nargs == 0 || tgfx_cfg[i].args[0] < 0) continue; - if (tgfx[i].nargs < 2) { + if (tgfx_cfg[i].nargs < 2) { printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n"); err = -EINVAL; break; } - tgfx_base[i] = tgfx_probe(tgfx[i].args[0], tgfx[i].args + 1, tgfx[i].nargs - 1); + tgfx_base[i] = tgfx_probe(tgfx_cfg[i].args[0], + tgfx_cfg[i].args + 1, + tgfx_cfg[i].nargs - 1); if (IS_ERR(tgfx_base[i])) { err = PTR_ERR(tgfx_base[i]); break; diff --git a/drivers/usb/input/xpad.c b/drivers/input/joystick/xpad.c index 735723912950..8c8cd95a6989 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -74,7 +74,6 @@ #include <linux/stat.h> #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/smp_lock.h> #include <linux/usb/input.h> #define DRIVER_VERSION "v0.0.6" diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 9f42e4d3649e..bd707b86c114 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -226,6 +226,7 @@ config KEYBOARD_PXA27x config KEYBOARD_AAED2000 tristate "AAED-2000 keyboard" depends on MACH_AAED2000 + select INPUT_POLLDEV default y help Say Y here to enable the keyboard on the Agilent AAED-2000 diff --git a/drivers/input/keyboard/aaed2000_kbd.c b/drivers/input/keyboard/aaed2000_kbd.c index 3a37505f067c..63d6ead6b877 100644 --- a/drivers/input/keyboard/aaed2000_kbd.c +++ b/drivers/input/keyboard/aaed2000_kbd.c @@ -14,12 +14,11 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/init.h> -#include <linux/input.h> +#include <linux/input-polldev.h> #include <linux/interrupt.h> #include <linux/jiffies.h> #include <linux/module.h> #include <linux/slab.h> -#include <linux/workqueue.h> #include <asm/arch/hardware.h> #include <asm/arch/aaed2000.h> @@ -46,8 +45,7 @@ static unsigned char aaedkbd_keycode[NR_SCANCODES] = { struct aaedkbd { unsigned char keycode[ARRAY_SIZE(aaedkbd_keycode)]; - struct input_dev *input; - struct work_struct workq; + struct input_polled_dev *poll_dev; int kbdscan_state[KB_COLS]; int kbdscan_count[KB_COLS]; }; @@ -64,14 +62,15 @@ static void aaedkbd_report_col(struct aaedkbd *aaedkbd, scancode = SCANCODE(row, col); pressed = rowd & KB_ROWMASK(row); - input_report_key(aaedkbd->input, aaedkbd->keycode[scancode], pressed); + input_report_key(aaedkbd->poll_dev->input, + aaedkbd->keycode[scancode], pressed); } } /* Scan the hardware keyboard and push any changes up through the input layer */ -static void aaedkbd_work(void *data) +static void aaedkbd_poll(struct input_polled_dev *dev) { - struct aaedkbd *aaedkbd = data; + struct aaedkbd *aaedkbd = dev->private; unsigned int col, rowd; col = 0; @@ -90,51 +89,34 @@ static void aaedkbd_work(void *data) } while (col < KB_COLS); AAEC_GPIO_KSCAN = 0x07; - input_sync(aaedkbd->input); - - schedule_delayed_work(&aaedkbd->workq, msecs_to_jiffies(SCAN_INTERVAL)); -} - -static int aaedkbd_open(struct input_dev *indev) -{ - struct aaedkbd *aaedkbd = input_get_drvdata(indev); - - schedule_delayed_work(&aaedkbd->workq, msecs_to_jiffies(SCAN_INTERVAL)); - - return 0; -} - -static void aaedkbd_close(struct input_dev *indev) -{ - struct aaedkbd *aaedkbd = input_get_drvdata(indev); - - cancel_delayed_work(&aaedkbd->workq); - flush_scheduled_work(); + input_sync(dev->input); } static int __devinit aaedkbd_probe(struct platform_device *pdev) { struct aaedkbd *aaedkbd; + struct input_polled_dev *poll_dev; struct input_dev *input_dev; int i; int error; aaedkbd = kzalloc(sizeof(struct aaedkbd), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!aaedkbd || !input_dev) { + poll_dev = input_allocate_polled_device(); + if (!aaedkbd || !poll_dev) { error = -ENOMEM; goto fail; } platform_set_drvdata(pdev, aaedkbd); - aaedkbd->input = input_dev; - - /* Init keyboard rescan workqueue */ - INIT_WORK(&aaedkbd->workq, aaedkbd_work, aaedkbd); - + aaedkbd->poll_dev = poll_dev; memcpy(aaedkbd->keycode, aaedkbd_keycode, sizeof(aaedkbd->keycode)); + poll_dev->private = aaedkbd; + poll_dev->poll = aaedkbd_poll; + poll_dev->poll_interval = SCAN_INTERVAL; + + input_dev = poll_dev->input; input_dev->name = "AAED-2000 Keyboard"; input_dev->phys = "aaedkbd/input0"; input_dev->id.bustype = BUS_HOST; @@ -143,8 +125,6 @@ static int __devinit aaedkbd_probe(struct platform_device *pdev) input_dev->id.version = 0x0100; input_dev->dev.parent = &pdev->dev; - input_set_drvdata(input_dev, aaedkbd); - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); input_dev->keycode = aaedkbd->keycode; input_dev->keycodesize = sizeof(unsigned char); @@ -154,17 +134,14 @@ static int __devinit aaedkbd_probe(struct platform_device *pdev) set_bit(aaedkbd->keycode[i], input_dev->keybit); clear_bit(0, input_dev->keybit); - input_dev->open = aaedkbd_open; - input_dev->close = aaedkbd_close; - - error = input_register_device(aaedkbd->input); + error = input_register_polled_device(aaedkbd->poll_dev); if (error) goto fail; return 0; fail: kfree(aaedkbd); - input_free_device(input_dev); + input_free_polled_device(poll_dev); return error; } @@ -172,7 +149,8 @@ static int __devexit aaedkbd_remove(struct platform_device *pdev) { struct aaedkbd *aaedkbd = platform_get_drvdata(pdev); - input_unregister_device(aaedkbd->input); + input_unregister_polled_device(aaedkbd->poll_dev); + input_free_polled_device(aaedkbd->poll_dev); kfree(aaedkbd); return 0; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 1d0d3e765db6..6013ace94d98 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -40,6 +40,18 @@ config INPUT_M68K_BEEP tristate "M68k Beeper support" depends on M68K +config INPUT_IXP4XX_BEEPER + tristate "IXP4XX Beeper support" + depends on ARCH_IXP4XX + help + If you say yes here, you can connect a beeper to the + ixp4xx gpio pins. This is used by the LinkSys NSLU2. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the + module will be called ixp4xx-beeper. + config INPUT_COBALT_BTNS tristate "Cobalt button interface" depends on MIPS_COBALT @@ -70,17 +82,79 @@ config INPUT_ATLAS_BTNS To compile this driver as a module, choose M here: the module will be called atlas_btns. -config INPUT_IXP4XX_BEEPER - tristate "IXP4XX Beeper support" - depends on ARCH_IXP4XX +config INPUT_ATI_REMOTE + tristate "ATI / X10 USB RF remote control" + select USB help - If you say yes here, you can connect a beeper to the - ixp4xx gpio pins. This is used by the LinkSys NSLU2. + Say Y here if you want to use an ATI or X10 "Lola" USB remote control. + These are RF remotes with USB receivers. + The ATI remote comes with many of ATI's All-In-Wonder video cards. + The X10 "Lola" remote is available at: + <http://www.x10.com/products/lola_sg1.htm> + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote. + +config INPUT_ATI_REMOTE2 + tristate "ATI / Philips USB RF remote control" + select USB + help + Say Y here if you want to use an ATI or Philips USB RF remote control. + These are RF remotes with USB receivers. + ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards + and is also available as a separate product. + This driver provides mouse pointer, left and right mouse buttons, + and maps all the other remote buttons to keypress events. + + To compile this driver as a module, choose M here: the module will be + called ati_remote2. + +config INPUT_KEYSPAN_REMOTE + tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" + depends on EXPERIMENTAL + select USB + help + Say Y here if you want to use a Keyspan DMR USB remote control. + Currently only the UIA-11 type of receiver has been tested. The tag + on the receiver that connects to the USB port should have a P/N that + will tell you what type of DMR you have. The UIA-10 type is not + supported at this time. This driver maps all buttons to keypress + events. - If unsure, say Y. + To compile this driver as a module, choose M here: the module will + be called keyspan_remote. + +config INPUT_POWERMATE + tristate "Griffin PowerMate and Contour Jog support" + select USB + help + Say Y here if you want to use Griffin PowerMate or Contour Jog devices. + These are aluminum dials which can measure clockwise and anticlockwise + rotation. The dial also acts as a pushbutton. The base contains an LED + which can be instructed to pulse or to switch to a particular intensity. + + You can download userspace tools from + <http://sowerbutts.com/powermate/>. To compile this driver as a module, choose M here: the - module will be called ixp4xx-beeper. + module will be called powermate. + +config INPUT_YEALINK + tristate "Yealink usb-p1k voip phone" + depends EXPERIMENTAL + select USB + help + Say Y here if you want to enable keyboard and LCD functions of the + Yealink usb-p1k usb phones. The audio part is enabled by the generic + usb sound driver, so you might want to enable that as well. + + For information about how to use these additional functions, see + <file:Documentation/input/yealink.txt>. + + To compile this driver as a module, choose M here: the module will be + called yealink. config INPUT_UINPUT tristate "User level driver support" diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 21e3cca0d33e..8b2f7799e25c 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -8,9 +8,14 @@ obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o -obj-$(CONFIG_INPUT_UINPUT) += uinput.o +obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o +obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o +obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o +obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o +obj-$(CONFIG_INPUT_POWERMATE) += powermate.o +obj-$(CONFIG_INPUT_YEALINK) += yealink.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o -obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o +obj-$(CONFIG_INPUT_UINPUT) += uinput.o diff --git a/drivers/usb/input/ati_remote.c b/drivers/input/misc/ati_remote.c index 471aab206443..471aab206443 100644 --- a/drivers/usb/input/ati_remote.c +++ b/drivers/input/misc/ati_remote.c diff --git a/drivers/usb/input/ati_remote2.c b/drivers/input/misc/ati_remote2.c index a9032aa3465f..1031543e5c3f 100644 --- a/drivers/usb/input/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -405,9 +405,7 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) for (i = 0; i < 2; i++) { usb_free_urb(ar2->urb[i]); - - if (ar2->buf[i]) - usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); + usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); } } diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c index 1bffc9fa98c2..1bffc9fa98c2 100644 --- a/drivers/usb/input/keyspan_remote.c +++ b/drivers/input/misc/keyspan_remote.c diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/input/misc/map_to_7segment.h index a424094d9fe2..a424094d9fe2 100644 --- a/drivers/usb/input/map_to_7segment.h +++ b/drivers/input/misc/map_to_7segment.h diff --git a/drivers/usb/input/powermate.c b/drivers/input/misc/powermate.c index 4f93a760faee..448a470d28f2 100644 --- a/drivers/usb/input/powermate.c +++ b/drivers/input/misc/powermate.c @@ -291,12 +291,10 @@ static int powermate_alloc_buffers(struct usb_device *udev, struct powermate_dev static void powermate_free_buffers(struct usb_device *udev, struct powermate_device *pm) { - if (pm->data) - usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX, - pm->data, pm->data_dma); - if (pm->configcr) - usb_buffer_free(udev, sizeof(*(pm->configcr)), - pm->configcr, pm->configcr_dma); + usb_buffer_free(udev, POWERMATE_PAYLOAD_SIZE_MAX, + pm->data, pm->data_dma); + usb_buffer_free(udev, sizeof(*(pm->configcr)), + pm->configcr, pm->configcr_dma); } /* Called whenever a USB device matching one in our supported devices table is connected */ diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 031467eadd31..a56ad4ba8fe2 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -33,7 +33,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/input.h> #include <linux/smp_lock.h> #include <linux/fs.h> #include <linux/miscdevice.h> diff --git a/drivers/usb/input/yealink.c b/drivers/input/misc/yealink.c index c54f1a5dcb4a..ab15880fd566 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/input/misc/yealink.c @@ -29,7 +29,7 @@ * This driver is based on: * - the usbb2k-api http://savannah.nongnu.org/projects/usbb2k-api/ * - information from http://memeteau.free.fr/usbb2k - * - the xpad-driver drivers/usb/input/xpad.c + * - the xpad-driver drivers/input/joystick/xpad.c * * Thanks to: * - Olivier Vandorpe, for providing the usbb2k-api. @@ -818,18 +818,17 @@ static int usb_cleanup(struct yealink_dev *yld, int err) else input_unregister_device(yld->idev); } - if (yld->ctl_req) - usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)), - yld->ctl_req, yld->ctl_req_dma); - if (yld->ctl_data) - usb_buffer_free(yld->udev, USB_PKT_LEN, - yld->ctl_data, yld->ctl_dma); - if (yld->irq_data) - usb_buffer_free(yld->udev, USB_PKT_LEN, - yld->irq_data, yld->irq_dma); - - usb_free_urb(yld->urb_irq); /* parameter validation in core/urb */ - usb_free_urb(yld->urb_ctl); /* parameter validation in core/urb */ + + usb_free_urb(yld->urb_irq); + usb_free_urb(yld->urb_ctl); + + usb_buffer_free(yld->udev, sizeof(*(yld->ctl_req)), + yld->ctl_req, yld->ctl_req_dma); + usb_buffer_free(yld->udev, USB_PKT_LEN, + yld->ctl_data, yld->ctl_dma); + usb_buffer_free(yld->udev, USB_PKT_LEN, + yld->irq_data, yld->irq_dma); + kfree(yld); return err; } diff --git a/drivers/usb/input/yealink.h b/drivers/input/misc/yealink.h index 48af0be9cbdf..48af0be9cbdf 100644 --- a/drivers/usb/input/yealink.h +++ b/drivers/input/misc/yealink.h diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 81dd8c7211a7..2ccc114b3ff6 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -2,7 +2,7 @@ # Mouse driver configuration # menuconfig INPUT_MOUSE - bool "Mouse" + bool "Mice" default y help Say Y here, and a list of supported mice will be displayed. @@ -19,7 +19,7 @@ config MOUSE_PS2 select SERIO_LIBPS2 select SERIO_I8042 if X86_PC select SERIO_GSCPS2 if GSC - ---help--- + help Say Y here if you have a PS/2 mouse connected to your system. This includes the standard 2 or 3-button PS/2 mouse, as well as PS/2 mice with wheels and extra buttons, Microsoft, Logitech or Genius @@ -41,7 +41,7 @@ config MOUSE_PS2_ALPS bool "ALPS PS/2 mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have an ALPS PS/2 touchpad connected to your system. @@ -51,7 +51,7 @@ config MOUSE_PS2_LOGIPS2PP bool "Logictech PS/2++ mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have a Logictech PS/2++ mouse connected to your system. @@ -61,7 +61,7 @@ config MOUSE_PS2_SYNAPTICS bool "Synaptics PS/2 mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have a Synaptics PS/2 TouchPad connected to your system. @@ -71,7 +71,7 @@ config MOUSE_PS2_LIFEBOOK bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have a Fujitsu B-series Lifebook PS/2 TouchScreen connected to your system. @@ -81,7 +81,7 @@ config MOUSE_PS2_TRACKPOINT bool "IBM Trackpoint PS/2 mouse protocol extension" if EMBEDDED default y depends on MOUSE_PS2 - ---help--- + help Say Y here if you have an IBM Trackpoint PS/2 mouse connected to your system. @@ -90,7 +90,7 @@ config MOUSE_PS2_TRACKPOINT config MOUSE_PS2_TOUCHKIT bool "eGalax TouchKit PS/2 protocol extension" depends on MOUSE_PS2 - ---help--- + help Say Y here if you have an eGalax TouchKit PS/2 touchscreen connected to your system. @@ -99,7 +99,7 @@ config MOUSE_PS2_TOUCHKIT config MOUSE_SERIAL tristate "Serial mouse" select SERIO - ---help--- + help Say Y here if you have a serial (RS-232, COM port) mouse connected to your system. This includes Sun, MouseSystems, Microsoft, Logitech and all other compatible serial mice. @@ -109,6 +109,26 @@ config MOUSE_SERIAL To compile this driver as a module, choose M here: the module will be called sermouse. +config MOUSE_APPLETOUCH + tristate "Apple USB Touchpad support" + select USB + help + Say Y here if you want to use an Apple USB Touchpad. + + These are the touchpads that can be found on post-February 2005 + Apple Powerbooks (prior models have a Synaptics touchpad connected + to the ADB bus). + + This driver provides a basic mouse driver but can be interfaced + with the synaptics X11 driver to provide acceleration and + scrolling in X11. + + For further information, see + <file:Documentation/input/appletouch.txt>. + + To compile this driver as a module, choose M here: the + module will be called appletouch. + config MOUSE_INPORT tristate "InPort/MS/ATIXL busmouse" depends on ISA diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 6a8f622927f2..aa4ba878533f 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -5,6 +5,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o +obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o obj-$(CONFIG_MOUSE_INPORT) += inport.o diff --git a/drivers/usb/input/appletouch.c b/drivers/input/mouse/appletouch.c index e3215267db11..e3215267db11 100644 --- a/drivers/usb/input/appletouch.c +++ b/drivers/input/mouse/appletouch.c diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index c77788bf932d..666ad3a53fdb 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -185,7 +185,7 @@ static int synaptics_query_hardware(struct psmouse *psmouse) int retries = 0; while ((retries++ < 3) && psmouse_reset(psmouse)) - printk(KERN_ERR "synaptics reset failed\n"); + /* empty */; if (synaptics_identify(psmouse)) return -1; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 7678e9876550..8675f9509393 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -19,7 +19,6 @@ #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/input.h> -#include <linux/smp_lock.h> #include <linux/random.h> #include <linux/major.h> #include <linux/device.h> diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 7c17377a65b9..3888dc307e0c 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -526,6 +526,33 @@ static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id) return IRQ_HANDLED; } +/* + * i8042_toggle_aux - enables or disables AUX port on i8042 via command and + * verifies success by readinng CTR. Used when testing for presence of AUX + * port. + */ +static int __devinit i8042_toggle_aux(int on) +{ + unsigned char param; + int i; + + if (i8042_command(¶m, + on ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE)) + return -1; + + /* some chips need some time to set the I8042_CTR_AUXDIS bit */ + for (i = 0; i < 100; i++) { + udelay(50); + + if (i8042_command(¶m, I8042_CMD_CTL_RCTR)) + return -1; + + if (!(param & I8042_CTR_AUXDIS) == on) + return 0; + } + + return -1; +} /* * i8042_check_aux() applies as much paranoia as it can at detecting @@ -580,16 +607,12 @@ static int __devinit i8042_check_aux(void) * Bit assignment test - filters out PS/2 i8042's in AT mode */ - if (i8042_command(¶m, I8042_CMD_AUX_DISABLE)) - return -1; - if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (~param & I8042_CTR_AUXDIS)) { + if (i8042_toggle_aux(0)) { printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n"); printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n"); } - if (i8042_command(¶m, I8042_CMD_AUX_ENABLE)) - return -1; - if (i8042_command(¶m, I8042_CMD_CTL_RCTR) || (param & I8042_CTR_AUXDIS)) + if (i8042_toggle_aux(1)) return -1; /* diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig new file mode 100644 index 000000000000..12dfb0eb3262 --- /dev/null +++ b/drivers/input/tablet/Kconfig @@ -0,0 +1,74 @@ +# +# Tablet driver configuration +# +menuconfig INPUT_TABLET + bool "Tablets" + help + Say Y here, and a list of supported tablets will be displayed. + This option doesn't affect the kernel. + + If unsure, say Y. + +if INPUT_TABLET + +config TABLET_USB_ACECAD + tristate "Acecad Flair tablet support (USB)" + select USB + help + Say Y here if you want to use the USB version of the Acecad Flair + tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called acecad. + +config TABLET_USB_AIPTEK + tristate "Aiptek 6000U/8000U tablet support (USB)" + select USB + help + Say Y here if you want to use the USB version of the Aiptek 6000U + or Aiptek 8000U tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called aiptek. + +config TABLET_USB_GTCO + tristate "GTCO CalComp/InterWrite USB Support" + depends on USB && INPUT + help + Say Y here if you want to use the USB version of the GTCO + CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called gtco. + +config TABLET_USB_KBTAB + tristate "KB Gear JamStudio tablet support (USB)" + select USB + help + Say Y here if you want to use the USB version of the KB Gear + JamStudio tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called kbtab. + +config TABLET_USB_WACOM + tristate "Wacom Intuos/Graphire tablet support (USB)" + select USB + help + Say Y here if you want to use the USB version of the Wacom Intuos + or Graphire tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called wacom. + +endif diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile new file mode 100644 index 000000000000..ce8b9a9cfa40 --- /dev/null +++ b/drivers/input/tablet/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the tablet drivers +# + +# Multipart objects. +wacom-objs := wacom_wac.o wacom_sys.o + +obj-$(CONFIG_TABLET_USB_ACECAD) += acecad.o +obj-$(CONFIG_TABLET_USB_AIPTEK) += aiptek.o +obj-$(CONFIG_TABLET_USB_GTCO) += gtco.o +obj-$(CONFIG_TABLET_USB_KBTAB) += kbtab.o +obj-$(CONFIG_TABLET_USB_WACOM) += wacom.o diff --git a/drivers/usb/input/acecad.c b/drivers/input/tablet/acecad.c index be8e9243c062..dd2310458c46 100644 --- a/drivers/usb/input/acecad.c +++ b/drivers/input/tablet/acecad.c @@ -54,7 +54,7 @@ struct usb_acecad { struct input_dev *input; struct urb *irq; - signed char *data; + unsigned char *data; dma_addr_t data_dma; }; diff --git a/drivers/usb/input/aiptek.c b/drivers/input/tablet/aiptek.c index cc0a498763d8..cc0a498763d8 100644 --- a/drivers/usb/input/aiptek.c +++ b/drivers/input/tablet/aiptek.c diff --git a/drivers/usb/input/gtco.c b/drivers/input/tablet/gtco.c index b2ca10f2fe0e..b2ca10f2fe0e 100644 --- a/drivers/usb/input/gtco.c +++ b/drivers/input/tablet/gtco.c diff --git a/drivers/usb/input/kbtab.c b/drivers/input/tablet/kbtab.c index c4781b9d1297..91e6d00d4a43 100644 --- a/drivers/usb/input/kbtab.c +++ b/drivers/input/tablet/kbtab.c @@ -29,7 +29,7 @@ module_param(kb_pressure_click, int, 0); MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks"); struct kbtab { - signed char *data; + unsigned char *data; dma_addr_t data_dma; struct input_dev *dev; struct usb_device *usbdev; diff --git a/drivers/usb/input/wacom.h b/drivers/input/tablet/wacom.h index d85abfc5ab58..ef01a807ec0f 100644 --- a/drivers/usb/input/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -1,5 +1,5 @@ /* - * drivers/usb/input/wacom.h + * drivers/input/tablet/wacom.h * * USB Wacom Graphire and Wacom Intuos tablet support * diff --git a/drivers/usb/input/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 1fe48208c2f4..83bddef66067 100644 --- a/drivers/usb/input/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -1,5 +1,5 @@ /* - * drivers/usb/input/wacom_sys.c + * drivers/input/tablet/wacom_sys.c * * USB Wacom Graphire and Wacom Intuos tablet support - system specific code */ diff --git a/drivers/usb/input/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 4f3e9bc7177d..7661f03a2db2 100644 --- a/drivers/usb/input/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1,5 +1,5 @@ /* - * drivers/usb/input/wacom_wac.c + * drivers/input/tablet/wacom_wac.c * * USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code * diff --git a/drivers/usb/input/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index a23022287248..a5e12e8756de 100644 --- a/drivers/usb/input/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -1,5 +1,5 @@ /* - * drivers/usb/input/wacom_wac.h + * drivers/input/tablet/wacom_wac.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -39,7 +39,7 @@ struct wacom_features { }; struct wacom_wac { - signed char *data; + unsigned char *data; int tool[2]; int id[2]; __u32 serial[2]; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 971618059a6f..5e640aeb03cd 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -1,5 +1,5 @@ # -# Mouse driver configuration +# Touchscreen driver configuration # menuconfig INPUT_TOUCHSCREEN bool "Touchscreens" @@ -44,9 +44,9 @@ config TOUCHSCREEN_BITSY config TOUCHSCREEN_CORGI tristate "SharpSL (Corgi and Spitz series) touchscreen driver" depends on PXA_SHARPSL - default y + default y help - Say Y here to enable the driver for the touchscreen on the + Say Y here to enable the driver for the touchscreen on the Sharp SL-C7xx and SL-Cxx00 series of PDAs. If unsure, say N. @@ -164,4 +164,58 @@ config TOUCHSCREEN_UCB1400 To compile this driver as a module, choose M here: the module will be called ucb1400_ts. +config TOUCHSCREEN_USB_COMPOSITE + tristate "USB Touchscreen Driver" + select USB + help + USB Touchscreen driver for: + - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) + - PanJit TouchSet USB + - 3M MicroTouch USB (EX II series) + - ITM + - some other eTurboTouch + - Gunze AHL61 + - DMC TSC-10/25 + + Have a look at <http://linux.chapter7.ch/touchkit/> for + a usage description and the required user-space stuff. + + To compile this driver as a module, choose M here: the + module will be called usbtouchscreen. + +config TOUCHSCREEN_USB_EGALAX + default y + bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_PANJIT + default y + bool "PanJit device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_3M + default y + bool "3M/Microtouch EX II series device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ITM + default y + bool "ITM device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_ETURBO + default y + bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_GUNZE + default y + bool "Gunze AHL61 device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + +config TOUCHSCREEN_USB_DMC_TSC10 + default y + bool "DMC TSC-10/25 device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 30e6e2217a15..2f86d6ad06d3 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -1,17 +1,18 @@ # -# Makefile for the mouse drivers. +# Makefile for the touchscreen drivers. # # Each configuration option enables a list of files. obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o -obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o -obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o -obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o -obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o -obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o -obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o -obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o +obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o +obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o +obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o +obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o +obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index e0829413336b..8e18e6c64777 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -668,9 +668,8 @@ static void usbtouch_close(struct input_dev *input) static void usbtouch_free_buffers(struct usb_device *udev, struct usbtouch_usb *usbtouch) { - if (usbtouch->data) - usb_buffer_free(udev, usbtouch->type->rept_size, - usbtouch->data, usbtouch->data_dma); + usb_buffer_free(udev, usbtouch->type->rept_size, + usbtouch->data, usbtouch->data_dma); kfree(usbtouch->buffer); } diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 5e5b5c91d75b..8238b13874c2 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -48,7 +48,6 @@ #include <linux/init.h> #include <linux/input.h> #include <linux/major.h> -#include <linux/smp_lock.h> #include <linux/random.h> #include <linux/time.h> #include <linux/device.h> diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c index db1260f73f10..81661b8bd3a8 100644 --- a/drivers/isdn/capi/capi.c +++ b/drivers/isdn/capi/capi.c @@ -18,8 +18,8 @@ #include <linux/fcntl.h> #include <linux/fs.h> #include <linux/signal.h> +#include <linux/mutex.h> #include <linux/mm.h> -#include <linux/smp_lock.h> #include <linux/timer.h> #include <linux/wait.h> #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE @@ -147,7 +147,7 @@ struct capidev { struct capincci *nccis; - struct semaphore ncci_list_sem; + struct mutex ncci_list_mtx; }; /* -------- global variables ---------------------------------------- */ @@ -395,7 +395,7 @@ static struct capidev *capidev_alloc(void) if (!cdev) return NULL; - init_MUTEX(&cdev->ncci_list_sem); + mutex_init(&cdev->ncci_list_mtx); skb_queue_head_init(&cdev->recvqueue); init_waitqueue_head(&cdev->recvwait); write_lock_irqsave(&capidev_list_lock, flags); @@ -414,9 +414,9 @@ static void capidev_free(struct capidev *cdev) } skb_queue_purge(&cdev->recvqueue); - down(&cdev->ncci_list_sem); + mutex_lock(&cdev->ncci_list_mtx); capincci_free(cdev, 0xffffffff); - up(&cdev->ncci_list_sem); + mutex_unlock(&cdev->ncci_list_mtx); write_lock_irqsave(&capidev_list_lock, flags); list_del(&cdev->list); @@ -603,15 +603,15 @@ static void capi_recv_message(struct capi20_appl *ap, struct sk_buff *skb) if (CAPIMSG_CMD(skb->data) == CAPI_CONNECT_B3_CONF) { u16 info = CAPIMSG_U16(skb->data, 12); // Info field if (info == 0) { - down(&cdev->ncci_list_sem); + mutex_lock(&cdev->ncci_list_mtx); capincci_alloc(cdev, CAPIMSG_NCCI(skb->data)); - up(&cdev->ncci_list_sem); + mutex_unlock(&cdev->ncci_list_mtx); } } if (CAPIMSG_CMD(skb->data) == CAPI_CONNECT_B3_IND) { - down(&cdev->ncci_list_sem); + mutex_lock(&cdev->ncci_list_mtx); capincci_alloc(cdev, CAPIMSG_NCCI(skb->data)); - up(&cdev->ncci_list_sem); + mutex_unlock(&cdev->ncci_list_mtx); } spin_lock_irqsave(&workaround_lock, flags); if (CAPIMSG_COMMAND(skb->data) != CAPI_DATA_B3) { @@ -752,9 +752,9 @@ capi_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos CAPIMSG_SETAPPID(skb->data, cdev->ap.applid); if (CAPIMSG_CMD(skb->data) == CAPI_DISCONNECT_B3_RESP) { - down(&cdev->ncci_list_sem); + mutex_lock(&cdev->ncci_list_mtx); capincci_free(cdev, CAPIMSG_NCCI(skb->data)); - up(&cdev->ncci_list_sem); + mutex_unlock(&cdev->ncci_list_mtx); } cdev->errcode = capi20_put_message(&cdev->ap, skb); @@ -939,9 +939,9 @@ capi_ioctl(struct inode *inode, struct file *file, if (copy_from_user(&ncci, argp, sizeof(ncci))) return -EFAULT; - down(&cdev->ncci_list_sem); + mutex_lock(&cdev->ncci_list_mtx); if ((nccip = capincci_find(cdev, (u32) ncci)) == 0) { - up(&cdev->ncci_list_sem); + mutex_unlock(&cdev->ncci_list_mtx); return 0; } #ifdef CONFIG_ISDN_CAPI_MIDDLEWARE @@ -949,7 +949,7 @@ capi_ioctl(struct inode *inode, struct file *file, count += atomic_read(&mp->ttyopencount); } #endif /* CONFIG_ISDN_CAPI_MIDDLEWARE */ - up(&cdev->ncci_list_sem); + mutex_unlock(&cdev->ncci_list_mtx); return count; } return 0; @@ -964,14 +964,14 @@ capi_ioctl(struct inode *inode, struct file *file, if (copy_from_user(&ncci, argp, sizeof(ncci))) return -EFAULT; - down(&cdev->ncci_list_sem); + mutex_lock(&cdev->ncci_list_mtx); nccip = capincci_find(cdev, (u32) ncci); if (!nccip || (mp = nccip->minorp) == 0) { - up(&cdev->ncci_list_sem); + mutex_unlock(&cdev->ncci_list_mtx); return -ESRCH; } unit = mp->minor; - up(&cdev->ncci_list_sem); + mutex_unlock(&cdev->ncci_list_mtx); return unit; } return 0; diff --git a/drivers/isdn/capi/capiutil.c b/drivers/isdn/capi/capiutil.c index ad1e2702c2d1..22379b94e88f 100644 --- a/drivers/isdn/capi/capiutil.c +++ b/drivers/isdn/capi/capiutil.c @@ -855,7 +855,7 @@ static _cdebbuf *g_debbuf; static u_long g_debbuf_lock; static _cmsg *g_cmsg; -_cdebbuf *cdebbuf_alloc(void) +static _cdebbuf *cdebbuf_alloc(void) { _cdebbuf *cdb; @@ -989,11 +989,6 @@ _cdebbuf *capi_cmsg2str(_cmsg * cmsg) return &g_debbuf; } -_cdebbuf *cdebbuf_alloc(void) -{ - return &g_debbuf; -} - void cdebbuf_free(_cdebbuf *cdb) { } @@ -1009,7 +1004,6 @@ void __exit cdebug_exit(void) #endif -EXPORT_SYMBOL(cdebbuf_alloc); EXPORT_SYMBOL(cdebbuf_free); EXPORT_SYMBOL(capi_cmsg2message); EXPORT_SYMBOL(capi_message2cmsg); diff --git a/drivers/isdn/divert/divert_procfs.c b/drivers/isdn/divert/divert_procfs.c index 53a189003355..be77ee625bb7 100644 --- a/drivers/isdn/divert/divert_procfs.c +++ b/drivers/isdn/divert/divert_procfs.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/poll.h> -#include <linux/smp_lock.h> #ifdef CONFIG_PROC_FS #include <linux/proc_fs.h> #else diff --git a/drivers/isdn/hardware/eicon/capimain.c b/drivers/isdn/hardware/eicon/capimain.c index 7a74ed35b1bf..98fcdfc7ca55 100644 --- a/drivers/isdn/hardware/eicon/capimain.c +++ b/drivers/isdn/hardware/eicon/capimain.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/init.h> #include <asm/uaccess.h> -#include <linux/smp_lock.h> #include <linux/skbuff.h> #include "os_capi.h" diff --git a/drivers/isdn/hardware/eicon/dbgioctl.h b/drivers/isdn/hardware/eicon/dbgioctl.h deleted file mode 100644 index 0fb6f5e88b60..000000000000 --- a/drivers/isdn/hardware/eicon/dbgioctl.h +++ /dev/null @@ -1,198 +0,0 @@ - -/* - * - Copyright (c) Eicon Technology Corporation, 2000. - * - This source file is supplied for the use with Eicon - Technology Corporation's range of DIVA Server Adapters. - * - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - * - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY - implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - * - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -/*------------------------------------------------------------------*/ -/* file: dbgioctl.h */ -/*------------------------------------------------------------------*/ - -#if !defined(__DBGIOCTL_H__) - -#define __DBGIOCTL_H__ - -#ifdef NOT_YET_NEEDED -/* - * The requested operation is passed in arg0 of DbgIoctlArgs, - * additional arguments (if any) in arg1, arg2 and arg3. - */ - -typedef struct -{ ULONG arg0 ; - ULONG arg1 ; - ULONG arg2 ; - ULONG arg3 ; -} DbgIoctlArgs ; - -#define DBG_COPY_LOGS 0 /* copy debugs to user until buffer full */ - /* arg1: size threshold */ - /* arg2: timeout in milliseconds */ - -#define DBG_FLUSH_LOGS 1 /* flush pending debugs to user buffer */ - /* arg1: internal driver id */ - -#define DBG_LIST_DRVS 2 /* return the list of registered drivers */ - -#define DBG_GET_MASK 3 /* get current debug mask of driver */ - /* arg1: internal driver id */ - -#define DBG_SET_MASK 4 /* set/change debug mask of driver */ - /* arg1: internal driver id */ - /* arg2: new debug mask */ - -#define DBG_GET_BUFSIZE 5 /* get current buffer size of driver */ - /* arg1: internal driver id */ - /* arg2: new debug mask */ - -#define DBG_SET_BUFSIZE 6 /* set new buffer size of driver */ - /* arg1: new buffer size */ - -/* - * common internal debug message structure - */ - -typedef struct -{ unsigned short id ; /* virtual driver id */ - unsigned short type ; /* special message type */ - unsigned long seq ; /* sequence number of message */ - unsigned long size ; /* size of message in bytes */ - unsigned long next ; /* offset to next buffered message */ - LARGE_INTEGER NTtime ; /* 100 ns since 1.1.1601 */ - unsigned char data[4] ;/* message data */ -} OldDbgMessage ; - -typedef struct -{ LARGE_INTEGER NTtime ; /* 100 ns since 1.1.1601 */ - unsigned short size ; /* size of message in bytes */ - unsigned short ffff ; /* always 0xffff to indicate new msg */ - unsigned short id ; /* virtual driver id */ - unsigned short type ; /* special message type */ - unsigned long seq ; /* sequence number of message */ - unsigned char data[4] ;/* message data */ -} DbgMessage ; - -#endif - -#define DRV_ID_UNKNOWN 0x0C /* for messages via prtComp() */ - -#define MSG_PROC_FLAG 0x80 -#define MSG_PROC_NO_GET(x) (((x) & MSG_PROC_FLAG) ? (((x) >> 4) & 7) : -1) -#define MSG_PROC_NO_SET(x) (MSG_PROC_FLAG | (((x) & 7) << 4)) - -#define MSG_TYPE_DRV_ID 0x0001 -#define MSG_TYPE_FLAGS 0x0002 -#define MSG_TYPE_STRING 0x0003 -#define MSG_TYPE_BINARY 0x0004 - -#define MSG_HEAD_SIZE ((unsigned long)&(((DbgMessage *)0)->data[0])) -#define MSG_ALIGN(len) (((unsigned long)(len) + MSG_HEAD_SIZE + 3) & ~3) -#define MSG_SIZE(pMsg) MSG_ALIGN((pMsg)->size) -#define MSG_NEXT(pMsg) ((DbgMessage *)( ((char *)(pMsg)) + MSG_SIZE(pMsg) )) - -#define OLD_MSG_HEAD_SIZE ((unsigned long)&(((OldDbgMessage *)0)->data[0])) -#define OLD_MSG_ALIGN(len) (((unsigned long)(len)+OLD_MSG_HEAD_SIZE+3) & ~3) - -/* - * manifest constants - */ - -#define MSG_FRAME_MAX_SIZE 2150 /* maximum size of B1 frame */ -#define MSG_TEXT_MAX_SIZE 1024 /* maximum size of msg text */ -#define MSG_MAX_SIZE MSG_ALIGN(MSG_FRAME_MAX_SIZE) -#define DBG_MIN_BUFFER_SIZE 0x00008000 /* minimal total buffer size 32 KB */ -#define DBG_DEF_BUFFER_SIZE 0x00020000 /* default total buffer size 128 KB */ -#define DBG_MAX_BUFFER_SIZE 0x00400000 /* maximal total buffer size 4 MB */ - -#define DBGDRV_NAME "Diehl_DIMAINT" -#define UNIDBG_DRIVER L"\\Device\\Diehl_DIMAINT" /* UNICODE name for kernel */ -#define DEBUG_DRIVER "\\\\.\\" DBGDRV_NAME /* traditional string for apps */ -#define DBGVXD_NAME "DIMAINT" -#define DEBUG_VXD "\\\\.\\" DBGVXD_NAME /* traditional string for apps */ - -/* - * Special IDI interface debug construction - */ - -#define DBG_IDI_SIG_REQ (unsigned long)0xF479C402 -#define DBG_IDI_SIG_IND (unsigned long)0xF479C403 -#define DBG_IDI_NL_REQ (unsigned long)0xF479C404 -#define DBG_IDI_NL_IND (unsigned long)0xF479C405 - -typedef struct -{ unsigned long magic_type ; - unsigned short data_len ; - unsigned char layer_ID ; - unsigned char entity_ID ; - unsigned char request ; - unsigned char ret_code ; - unsigned char indication ; - unsigned char complete ; - unsigned char data[4] ; -} DbgIdiAct, *DbgIdiAction ; - -/* - * We want to use the same IOCTL codes in Win95 and WinNT. - * The official constructor for IOCTL codes is the CTL_CODE macro - * from <winoctl.h> (<devioctl.h> in WinNT DDK environment). - * The problem here is that we don't know how to get <winioctl.h> - * working in a Win95 DDK environment! - */ - -# ifdef CTL_CODE /*{*/ - -/* Assert that we have the same idea of the CTL_CODE macro. */ - -#define CTL_CODE( DeviceType, Function, Method, Access ) ( \ - ((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method) \ -) - -# else /* !CTL_CODE */ /*}{*/ - -/* Use the definitions stolen from <winioctl.h>. */ - -#define CTL_CODE( DeviceType, Function, Method, Access ) ( \ - ((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method) \ -) - -#define METHOD_BUFFERED 0 -#define METHOD_IN_DIRECT 1 -#define METHOD_OUT_DIRECT 2 -#define METHOD_NEITHER 3 - -#define FILE_ANY_ACCESS 0 -#define FILE_READ_ACCESS ( 0x0001 ) // file & pipe -#define FILE_WRITE_ACCESS ( 0x0002 ) // file & pipe - -# endif /* CTL_CODE */ /*}*/ - -/* - * Now we can define WinNT/Win95 DeviceIoControl codes. - * - * These codes are defined in di_defs.h too, a possible mismatch will be - * detected when the dbgtool is compiled. - */ - -#define IOCTL_DRIVER_LNK \ - CTL_CODE(0x8001U,0x701,METHOD_OUT_DIRECT,FILE_ANY_ACCESS) -#define IOCTL_DRIVER_DBG \ - CTL_CODE(0x8001U,0x702,METHOD_OUT_DIRECT,FILE_ANY_ACCESS) - -#endif /* __DBGIOCTL_H__ */ diff --git a/drivers/isdn/hardware/eicon/divamnt.c b/drivers/isdn/hardware/eicon/divamnt.c index 4aba5c502d8e..c90928974249 100644 --- a/drivers/isdn/hardware/eicon/divamnt.c +++ b/drivers/isdn/hardware/eicon/divamnt.c @@ -13,7 +13,6 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> -#include <linux/smp_lock.h> #include <linux/poll.h> #include <asm/uaccess.h> diff --git a/drivers/isdn/hardware/eicon/divasi.c b/drivers/isdn/hardware/eicon/divasi.c index 556b19615bc7..78f141e77466 100644 --- a/drivers/isdn/hardware/eicon/divasi.c +++ b/drivers/isdn/hardware/eicon/divasi.c @@ -14,7 +14,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/poll.h> #include <linux/proc_fs.h> #include <linux/skbuff.h> diff --git a/drivers/isdn/hardware/eicon/divasmain.c b/drivers/isdn/hardware/eicon/divasmain.c index 5e862e244117..6d39f9360766 100644 --- a/drivers/isdn/hardware/eicon/divasmain.c +++ b/drivers/isdn/hardware/eicon/divasmain.c @@ -17,7 +17,6 @@ #include <linux/ioport.h> #include <linux/workqueue.h> #include <linux/pci.h> -#include <linux/smp_lock.h> #include <linux/interrupt.h> #include <linux/list.h> #include <linux/poll.h> diff --git a/drivers/isdn/hardware/eicon/main_if.h b/drivers/isdn/hardware/eicon/main_if.h deleted file mode 100644 index 0ea339afd424..000000000000 --- a/drivers/isdn/hardware/eicon/main_if.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * - Copyright (c) Eicon Technology Corporation, 2000. - * - This source file is supplied for the use with Eicon - Technology Corporation's range of DIVA Server Adapters. - * - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - * - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY - implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - * - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -/*------------------------------------------------------------------*/ -/* file: main_if.h */ -/*------------------------------------------------------------------*/ -# ifndef MAIN_IF___H -# define MAIN_IF___H - -# include "debug_if.h" - -void DI_lock (void) ; -void DI_unlock (void) ; - -#ifdef NOT_YET_NEEDED -void DI_nttime (LARGE_INTEGER *NTtime) ; -void DI_ntlcltime(LARGE_INTEGER *NTtime, LARGE_INTEGER *lclNTtime) ; -void DI_nttimefields(LARGE_INTEGER *NTtime, TIME_FIELDS *TimeFields); -unsigned long DI_wintime(LARGE_INTEGER *NTtime) ; - -unsigned short DiInsertProcessorNumber (int type) ; -void DiProcessEventLog (unsigned short id, unsigned long msgID, va_list ap); - -void StartIoctlTimer (void (*Handler)(void), unsigned long msec) ; -void StopIoctlTimer (void) ; -void UnpendIoctl (DbgRequest *pDbgReq) ; -#endif - -void add_to_q(int, char* , unsigned int); -# endif /* MAIN_IF___H */ - diff --git a/drivers/isdn/hardware/eicon/platform.h b/drivers/isdn/hardware/eicon/platform.h index ff09f07f440a..15d4942de53b 100644 --- a/drivers/isdn/hardware/eicon/platform.h +++ b/drivers/isdn/hardware/eicon/platform.h @@ -26,7 +26,6 @@ #include <linux/vmalloc.h> #include <linux/proc_fs.h> #include <linux/interrupt.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <linux/list.h> #include <asm/types.h> diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 9f44d3e69fb0..99e70d4103b6 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -37,7 +37,6 @@ #include <linux/kernel_stat.h> #include <linux/usb.h> #include <linux/kernel.h> -#include <linux/smp_lock.h> #include "hisax.h" #include "hisax_if.h" #include "hfc_usb.h" diff --git a/drivers/isdn/hysdn/boardergo.c b/drivers/isdn/hysdn/boardergo.c index 84dccd526ac0..6cdbad3a9926 100644 --- a/drivers/isdn/hysdn/boardergo.c +++ b/drivers/isdn/hysdn/boardergo.c @@ -443,7 +443,7 @@ ergo_inithardware(hysdn_card * card) card->waitpofready = ergo_waitpofready; card->set_errlog_state = ergo_set_errlog_state; INIT_WORK(&card->irq_queue, ergo_irq_bh); - card->hysdn_lock = SPIN_LOCK_UNLOCKED; + spin_lock_init(&card->hysdn_lock); return (0); } /* ergo_inithardware */ diff --git a/drivers/isdn/hysdn/hysdn_proclog.c b/drivers/isdn/hysdn/hysdn_proclog.c index 4c7dedac0e51..27b3991fb0ec 100644 --- a/drivers/isdn/hysdn/hysdn_proclog.c +++ b/drivers/isdn/hysdn/hysdn_proclog.c @@ -297,8 +297,6 @@ hysdn_log_close(struct inode *ino, struct file *filep) struct procdata *pd; hysdn_card *card; int retval = 0; - unsigned long flags; - spinlock_t hysdn_lock = SPIN_LOCK_UNLOCKED; lock_kernel(); if ((filep->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_WRITE) { @@ -308,7 +306,6 @@ hysdn_log_close(struct inode *ino, struct file *filep) /* read access -> log/debug read, mark one further file as closed */ pd = NULL; - spin_lock_irqsave(&hysdn_lock, flags); inf = *((struct log_data **) filep->private_data); /* get first log entry */ if (inf) pd = (struct procdata *) inf->proc_ctrl; /* still entries there */ @@ -331,7 +328,6 @@ hysdn_log_close(struct inode *ino, struct file *filep) inf->usage_cnt--; /* decrement usage count for buffers */ inf = inf->next; } - spin_unlock_irqrestore(&hysdn_lock, flags); if (pd) if (pd->if_used <= 0) /* delete buffers if last file closed */ diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c index e93ad59f60bf..bb92e3cd9334 100644 --- a/drivers/isdn/isdnloop/isdnloop.c +++ b/drivers/isdn/isdnloop/isdnloop.c @@ -1462,7 +1462,7 @@ isdnloop_initcard(char *id) skb_queue_head_init(&card->bqueue[i]); } skb_queue_head_init(&card->dqueue); - card->isdnloop_lock = SPIN_LOCK_UNLOCKED; + spin_lock_init(&card->isdnloop_lock); card->next = cards; cards = card; if (!register_isdn(&card->interface)) { diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 1a86387e23be..a32c91e27b3c 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -1,6 +1,10 @@ -menu "Macintosh device drivers" +menuconfig MACINTOSH_DRIVERS + bool "Macintosh device drivers" depends on PPC || MAC || X86 + default y + +if MACINTOSH_DRIVERS config ADB bool "Apple Desktop Bus (ADB) support" @@ -109,7 +113,9 @@ config PMAC_SMU config PMAC_APM_EMU tristate "APM emulation" - depends on PPC_PMAC && PPC32 && PM && ADB_PMU + select SYS_SUPPORTS_APM_EMULATION + select APM_EMULATION + depends on ADB_PMU && PM config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" @@ -234,4 +240,4 @@ config PMAC_RACKMETER This driver procides some support to control the front panel blue LEDs "vu-meter" of the XServer macs. -endmenu +endif # MACINTOSH_DRIVERS diff --git a/drivers/macintosh/apm_emu.c b/drivers/macintosh/apm_emu.c index cdb0bead9917..9821e6361e60 100644 --- a/drivers/macintosh/apm_emu.c +++ b/drivers/macintosh/apm_emu.c @@ -1,9 +1,7 @@ -/* APM emulation layer for PowerMac - * - * Copyright 2001 Benjamin Herrenschmidt (benh@kernel.crashing.org) +/* + * APM emulation for PMU-based machines * - * Lots of code inherited from apm.c, see appropriate notice in - * arch/i386/kernel/apm.c + * Copyright 2001 Benjamin Herrenschmidt (benh@kernel.crashing.org) * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -18,429 +16,39 @@ * */ -#include <linux/module.h> - -#include <linux/poll.h> -#include <linux/types.h> -#include <linux/stddef.h> -#include <linux/timer.h> -#include <linux/fcntl.h> -#include <linux/slab.h> -#include <linux/stat.h> -#include <linux/proc_fs.h> -#include <linux/miscdevice.h> -#include <linux/apm_bios.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/pm.h> #include <linux/kernel.h> -#include <linux/smp_lock.h> - +#include <linux/module.h> +#include <linux/apm-emulation.h> #include <linux/adb.h> #include <linux/pmu.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> - -#undef DEBUG - -#ifdef DEBUG -#define DBG(args...) printk(KERN_DEBUG args) -//#define DBG(args...) xmon_printf(args) -#else -#define DBG(args...) do { } while (0) -#endif - -/* - * The apm_bios device is one of the misc char devices. - * This is its minor number. - */ -#define APM_MINOR_DEV 134 - -/* - * Maximum number of events stored - */ -#define APM_MAX_EVENTS 20 - -#define FAKE_APM_BIOS_VERSION 0x0101 - -#define APM_USER_NOTIFY_TIMEOUT (5*HZ) - -/* - * The per-file APM data - */ -struct apm_user { - int magic; - struct apm_user * next; - int suser: 1; - int suspend_waiting: 1; - int suspends_pending; - int suspends_read; - int event_head; - int event_tail; - apm_event_t events[APM_MAX_EVENTS]; -}; - -/* - * The magic number in apm_user - */ -#define APM_BIOS_MAGIC 0x4101 - -/* - * Local variables - */ -static int suspends_pending; - -static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue); -static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue); -static struct apm_user * user_list; - -static void apm_notify_sleep(struct pmu_sleep_notifier *self, int when); -static struct pmu_sleep_notifier apm_sleep_notifier = { - apm_notify_sleep, - SLEEP_LEVEL_USERLAND, -}; - -static const char driver_version[] = "0.5"; /* no spaces */ - -#ifdef DEBUG -static char * apm_event_name[] = { - "system standby", - "system suspend", - "normal resume", - "critical resume", - "low battery", - "power status change", - "update time", - "critical suspend", - "user standby", - "user suspend", - "system standby resume", - "capabilities change" -}; -#define NR_APM_EVENT_NAME \ - (sizeof(apm_event_name) / sizeof(apm_event_name[0])) - -#endif - -static int queue_empty(struct apm_user *as) -{ - return as->event_head == as->event_tail; -} - -static apm_event_t get_queued_event(struct apm_user *as) -{ - as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS; - return as->events[as->event_tail]; -} - -static void queue_event(apm_event_t event, struct apm_user *sender) -{ - struct apm_user * as; - - DBG("apm_emu: queue_event(%s)\n", apm_event_name[event-1]); - if (user_list == NULL) - return; - for (as = user_list; as != NULL; as = as->next) { - if (as == sender) - continue; - as->event_head = (as->event_head + 1) % APM_MAX_EVENTS; - if (as->event_head == as->event_tail) { - static int notified; - - if (notified++ == 0) - printk(KERN_ERR "apm_emu: an event queue overflowed\n"); - as->event_tail = (as->event_tail + 1) % APM_MAX_EVENTS; - } - as->events[as->event_head] = event; - if (!as->suser) - continue; - switch (event) { - case APM_SYS_SUSPEND: - case APM_USER_SUSPEND: - as->suspends_pending++; - suspends_pending++; - break; - case APM_NORMAL_RESUME: - as->suspend_waiting = 0; - break; - } - } - wake_up_interruptible(&apm_waitqueue); -} - -static int check_apm_user(struct apm_user *as, const char *func) -{ - if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { - printk(KERN_ERR "apm_emu: %s passed bad filp\n", func); - return 1; - } - return 0; -} - -static ssize_t do_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) -{ - struct apm_user * as; - size_t i; - apm_event_t event; - DECLARE_WAITQUEUE(wait, current); - - as = fp->private_data; - if (check_apm_user(as, "read")) - return -EIO; - if (count < sizeof(apm_event_t)) - return -EINVAL; - if (queue_empty(as)) { - if (fp->f_flags & O_NONBLOCK) - return -EAGAIN; - add_wait_queue(&apm_waitqueue, &wait); -repeat: - set_current_state(TASK_INTERRUPTIBLE); - if (queue_empty(as) && !signal_pending(current)) { - schedule(); - goto repeat; - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&apm_waitqueue, &wait); - } - i = count; - while ((i >= sizeof(event)) && !queue_empty(as)) { - event = get_queued_event(as); - DBG("apm_emu: do_read, returning: %s\n", apm_event_name[event-1]); - if (copy_to_user(buf, &event, sizeof(event))) { - if (i < count) - break; - return -EFAULT; - } - switch (event) { - case APM_SYS_SUSPEND: - case APM_USER_SUSPEND: - as->suspends_read++; - break; - } - buf += sizeof(event); - i -= sizeof(event); - } - if (i < count) - return count - i; - if (signal_pending(current)) - return -ERESTARTSYS; - return 0; -} - -static unsigned int do_poll(struct file *fp, poll_table * wait) -{ - struct apm_user * as; - - as = fp->private_data; - if (check_apm_user(as, "poll")) - return 0; - poll_wait(fp, &apm_waitqueue, wait); - if (!queue_empty(as)) - return POLLIN | POLLRDNORM; - return 0; -} - -static int do_ioctl(struct inode * inode, struct file *filp, - u_int cmd, u_long arg) -{ - struct apm_user * as; - DECLARE_WAITQUEUE(wait, current); - - as = filp->private_data; - if (check_apm_user(as, "ioctl")) - return -EIO; - if (!as->suser) - return -EPERM; - switch (cmd) { - case APM_IOC_SUSPEND: - /* If a suspend message was sent to userland, we - * consider this as a confirmation message - */ - if (as->suspends_read > 0) { - as->suspends_read--; - as->suspends_pending--; - suspends_pending--; - } else { - // Route to PMU suspend ? - break; - } - as->suspend_waiting = 1; - add_wait_queue(&apm_waitqueue, &wait); - DBG("apm_emu: ioctl waking up sleep waiter !\n"); - wake_up(&apm_suspend_waitqueue); - mb(); - while(as->suspend_waiting && !signal_pending(current)) { - set_current_state(TASK_INTERRUPTIBLE); - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&apm_waitqueue, &wait); - break; - default: - return -EINVAL; - } - return 0; -} - -static int do_release(struct inode * inode, struct file * filp) -{ - struct apm_user * as; - - as = filp->private_data; - if (check_apm_user(as, "release")) - return 0; - filp->private_data = NULL; - lock_kernel(); - if (as->suspends_pending > 0) { - suspends_pending -= as->suspends_pending; - if (suspends_pending <= 0) - wake_up(&apm_suspend_waitqueue); - } - if (user_list == as) - user_list = as->next; - else { - struct apm_user * as1; - - for (as1 = user_list; - (as1 != NULL) && (as1->next != as); - as1 = as1->next) - ; - if (as1 == NULL) - printk(KERN_ERR "apm: filp not in user list\n"); - else - as1->next = as->next; - } - unlock_kernel(); - kfree(as); - return 0; -} - -static int do_open(struct inode * inode, struct file * filp) -{ - struct apm_user * as; - - as = kmalloc(sizeof(*as), GFP_KERNEL); - if (as == NULL) { - printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n", - sizeof(*as)); - return -ENOMEM; - } - as->magic = APM_BIOS_MAGIC; - as->event_tail = as->event_head = 0; - as->suspends_pending = 0; - as->suspends_read = 0; - /* - * XXX - this is a tiny bit broken, when we consider BSD - * process accounting. If the device is opened by root, we - * instantly flag that we used superuser privs. Who knows, - * we might close the device immediately without doing a - * privileged operation -- cevans - */ - as->suser = capable(CAP_SYS_ADMIN); - as->next = user_list; - user_list = as; - filp->private_data = as; - - DBG("apm_emu: opened by %s, suser: %d\n", current->comm, (int)as->suser); - - return 0; -} - -/* Wait for all clients to ack the suspend request. APM API - * doesn't provide a way to NAK, but this could be added - * here. - */ -static void wait_all_suspend(void) -{ - DECLARE_WAITQUEUE(wait, current); - - add_wait_queue(&apm_suspend_waitqueue, &wait); - DBG("apm_emu: wait_all_suspend(), suspends_pending: %d\n", suspends_pending); - while(suspends_pending > 0) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule(); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&apm_suspend_waitqueue, &wait); - - DBG("apm_emu: wait_all_suspend() - complete !\n"); -} - -static void apm_notify_sleep(struct pmu_sleep_notifier *self, int when) -{ - switch(when) { - case PBOOK_SLEEP_REQUEST: - queue_event(APM_SYS_SUSPEND, NULL); - wait_all_suspend(); - break; - case PBOOK_WAKE: - queue_event(APM_NORMAL_RESUME, NULL); - break; - } -} - #define APM_CRITICAL 10 #define APM_LOW 30 -static int apm_emu_get_info(char *buf, char **start, off_t fpos, int length) +static void pmu_apm_get_power_status(struct apm_power_info *info) { - /* Arguments, with symbols from linux/apm_bios.h. Information is - from the Get Power Status (0x0a) call unless otherwise noted. + int percentage = -1; + int batteries = 0; + int time_units = -1; + int real_count = 0; + int i; + char charging = 0; + long charge = -1; + long amperage = 0; + unsigned long btype = 0; + + info->battery_status = APM_BATTERY_STATUS_UNKNOWN; + info->battery_flag = APM_BATTERY_FLAG_UNKNOWN; + info->units = APM_UNITS_MINS; + + if (pmu_power_flags & PMU_PWR_AC_PRESENT) + info->ac_line_status = APM_AC_ONLINE; + else + info->ac_line_status = APM_AC_OFFLINE; - 0) Linux driver version (this will change if format changes) - 1) APM BIOS Version. Usually 1.0, 1.1 or 1.2. - 2) APM flags from APM Installation Check (0x00): - bit 0: APM_16_BIT_SUPPORT - bit 1: APM_32_BIT_SUPPORT - bit 2: APM_IDLE_SLOWS_CLOCK - bit 3: APM_BIOS_DISABLED - bit 4: APM_BIOS_DISENGAGED - 3) AC line status - 0x00: Off-line - 0x01: On-line - 0x02: On backup power (BIOS >= 1.1 only) - 0xff: Unknown - 4) Battery status - 0x00: High - 0x01: Low - 0x02: Critical - 0x03: Charging - 0x04: Selected battery not present (BIOS >= 1.2 only) - 0xff: Unknown - 5) Battery flag - bit 0: High - bit 1: Low - bit 2: Critical - bit 3: Charging - bit 7: No system battery - 0xff: Unknown - 6) Remaining battery life (percentage of charge): - 0-100: valid - -1: Unknown - 7) Remaining battery life (time units): - Number of remaining minutes or seconds - -1: Unknown - 8) min = minutes; sec = seconds */ - - unsigned short ac_line_status; - unsigned short battery_status = 0; - unsigned short battery_flag = 0xff; - int percentage = -1; - int time_units = -1; - int real_count = 0; - int i; - char * p = buf; - char charging = 0; - long charge = -1; - long amperage = 0; - unsigned long btype = 0; - - ac_line_status = ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0); for (i=0; i<pmu_battery_count; i++) { if (pmu_batteries[i].flags & PMU_BATT_PRESENT) { - battery_status++; + batteries++; if (percentage < 0) percentage = 0; if (charge < 0) @@ -456,9 +64,9 @@ static int apm_emu_get_info(char *buf, char **start, off_t fpos, int length) charging++; } } - if (0 == battery_status) - ac_line_status = 1; - battery_status = 0xff; + if (batteries == 0) + info->ac_line_status = APM_AC_ONLINE; + if (real_count) { if (amperage < 0) { if (btype == PMU_BATT_TYPE_SMART) @@ -468,85 +76,44 @@ static int apm_emu_get_info(char *buf, char **start, off_t fpos, int length) } percentage /= real_count; if (charging > 0) { - battery_status = 0x03; - battery_flag = 0x08; + info->battery_status = APM_BATTERY_STATUS_CHARGING; + info->battery_flag = APM_BATTERY_FLAG_CHARGING; } else if (percentage <= APM_CRITICAL) { - battery_status = 0x02; - battery_flag = 0x04; + info->battery_status = APM_BATTERY_STATUS_CRITICAL; + info->battery_flag = APM_BATTERY_FLAG_CRITICAL; } else if (percentage <= APM_LOW) { - battery_status = 0x01; - battery_flag = 0x02; + info->battery_status = APM_BATTERY_STATUS_LOW; + info->battery_flag = APM_BATTERY_FLAG_LOW; } else { - battery_status = 0x00; - battery_flag = 0x01; + info->battery_status = APM_BATTERY_STATUS_HIGH; + info->battery_flag = APM_BATTERY_FLAG_HIGH; } } - p += sprintf(p, "%s %d.%d 0x%02x 0x%02x 0x%02x 0x%02x %d%% %d %s\n", - driver_version, - (FAKE_APM_BIOS_VERSION >> 8) & 0xff, - FAKE_APM_BIOS_VERSION & 0xff, - 0, - ac_line_status, - battery_status, - battery_flag, - percentage, - time_units, - "min"); - return p - buf; + info->battery_life = percentage; + info->time = time_units; } -static const struct file_operations apm_bios_fops = { - .owner = THIS_MODULE, - .read = do_read, - .poll = do_poll, - .ioctl = do_ioctl, - .open = do_open, - .release = do_release, -}; - -static struct miscdevice apm_device = { - APM_MINOR_DEV, - "apm_bios", - &apm_bios_fops -}; - static int __init apm_emu_init(void) { - struct proc_dir_entry *apm_proc; - - if (sys_ctrler != SYS_CTRLER_PMU) { - printk(KERN_INFO "apm_emu: Requires a machine with a PMU.\n"); - return -ENODEV; - } - - apm_proc = create_proc_info_entry("apm", 0, NULL, apm_emu_get_info); - if (apm_proc) - apm_proc->owner = THIS_MODULE; + apm_get_power_status = pmu_apm_get_power_status; - if (misc_register(&apm_device) != 0) - printk(KERN_INFO "Could not create misc. device for apm\n"); - - pmu_register_sleep_notifier(&apm_sleep_notifier); - - printk(KERN_INFO "apm_emu: APM Emulation %s initialized.\n", driver_version); + printk(KERN_INFO "apm_emu: PMU APM Emulation initialized.\n"); return 0; } static void __exit apm_emu_exit(void) { - pmu_unregister_sleep_notifier(&apm_sleep_notifier); - misc_deregister(&apm_device); - remove_proc_entry("apm", NULL); + if (apm_get_power_status == pmu_apm_get_power_status) + apm_get_power_status = NULL; - printk(KERN_INFO "apm_emu: APM Emulation removed.\n"); + printk(KERN_INFO "apm_emu: PMU APM Emulation removed.\n"); } module_init(apm_emu_init); module_exit(apm_emu_exit); MODULE_AUTHOR("Benjamin Herrenschmidt"); -MODULE_DESCRIPTION("APM emulation layer for PowerMac"); +MODULE_DESCRIPTION("APM emulation for PowerMac"); MODULE_LICENSE("GPL"); - diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c index 1599dc34f15f..76c1e8e4a487 100644 --- a/drivers/macintosh/mac_hid.c +++ b/drivers/macintosh/mac_hid.c @@ -24,7 +24,7 @@ static int mouse_last_keycode; #if defined(CONFIG_SYSCTL) /* file(s) in /proc/sys/dev/mac_hid */ -ctl_table mac_hid_files[] = { +static ctl_table mac_hid_files[] = { { .ctl_name = DEV_MAC_HID_MOUSE_BUTTON_EMULATION, .procname = "mouse_button_emulation", @@ -53,7 +53,7 @@ ctl_table mac_hid_files[] = { }; /* dir in /proc/sys/dev */ -ctl_table mac_hid_dir[] = { +static ctl_table mac_hid_dir[] = { { .ctl_name = DEV_MAC_HID, .procname = "mac_hid", @@ -65,7 +65,7 @@ ctl_table mac_hid_dir[] = { }; /* /proc/sys/dev itself, in case that is not there yet */ -ctl_table mac_hid_root_dir[] = { +static ctl_table mac_hid_root_dir[] = { { .ctl_name = CTL_DEV, .procname = "dev", @@ -127,7 +127,7 @@ static int emumousebtn_input_register(void) return ret; } -int __init mac_hid_init(void) +static int __init mac_hid_init(void) { int err; diff --git a/drivers/macintosh/macio_sysfs.c b/drivers/macintosh/macio_sysfs.c index cc8267912656..112e5ef728f1 100644 --- a/drivers/macintosh/macio_sysfs.c +++ b/drivers/macintosh/macio_sysfs.c @@ -41,28 +41,15 @@ compatible_show (struct device *dev, struct device_attribute *attr, char *buf) static ssize_t modalias_show (struct device *dev, struct device_attribute *attr, char *buf) { - struct of_device *of; - const char *compat; - int cplen; - int length; + struct of_device *ofdev = to_of_device(dev); + int len; - of = &to_macio_device (dev)->ofdev; - compat = of_get_property(of->node, "compatible", &cplen); - if (!compat) compat = "", cplen = 1; - length = sprintf (buf, "of:N%sT%s", of->node->name, of->node->type); - buf += length; - while (cplen > 0) { - int l; - l = sprintf (buf, "C%s", compat); - length += l; - buf += l; - l = strlen (compat) + 1; - compat += l; - cplen -= l; - } - length += sprintf(buf, "\n"); + len = of_device_get_modalias(ofdev, buf, PAGE_SIZE); - return length; + buf[len] = '\n'; + buf[len+1] = 0; + + return len+1; } macio_config_of_attr (name, "%s\n"); diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index a98a328b1cfc..f8e1a135bf9d 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -606,7 +606,7 @@ static void smu_expose_childs(struct work_struct *unused) struct device_node *np; for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) - if (device_is_compatible(np, "smu-sensors")) + if (of_device_is_compatible(np, "smu-sensors")) of_platform_device_create(np, "smu-sensors", &smu->of_dev->dev); } diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 228903403cfc..bd55e6ab99fc 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -19,7 +19,6 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/spinlock.h> -#include <linux/smp_lock.h> #include <linux/wait.h> #include <linux/suspend.h> #include <linux/kthread.h> @@ -560,9 +559,9 @@ thermostat_init(void) np = of_find_node_by_name(NULL, "fan"); if (!np) return -ENODEV; - if (device_is_compatible(np, "adt7460")) + if (of_device_is_compatible(np, "adt7460")) therm_type = ADT7460; - else if (device_is_compatible(np, "adt7467")) + else if (of_device_is_compatible(np, "adt7467")) therm_type = ADT7467; else return -ENODEV; diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index 78ff18617139..dbb22403979f 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -117,7 +117,6 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/spinlock.h> -#include <linux/smp_lock.h> #include <linux/wait.h> #include <linux/reboot.h> #include <linux/kmod.h> diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c index fc89a7047cd0..55ad95671387 100644 --- a/drivers/macintosh/via-pmu-led.c +++ b/drivers/macintosh/via-pmu-led.c @@ -31,7 +31,6 @@ static spinlock_t pmu_blink_lock; static struct adb_request pmu_blink_req; /* -1: no change, 0: request off, 1: request on */ static int requested_change; -static int sleeping; static void pmu_req_done(struct adb_request * req) { @@ -41,7 +40,7 @@ static void pmu_req_done(struct adb_request * req) /* if someone requested a change in the meantime * (we only see the last one which is fine) * then apply it now */ - if (requested_change != -1 && !sleeping) + if (requested_change != -1 && !pmu_sys_suspended) pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); /* reset requested change */ requested_change = -1; @@ -66,7 +65,7 @@ static void pmu_led_set(struct led_classdev *led_cdev, break; } /* if request isn't done, then don't do anything */ - if (pmu_blink_req.complete && !sleeping) + if (pmu_blink_req.complete && !pmu_sys_suspended) pmu_request(&pmu_blink_req, NULL, 4, 0xee, 4, 0, requested_change); out: spin_unlock_irqrestore(&pmu_blink_lock, flags); @@ -80,32 +79,6 @@ static struct led_classdev pmu_led = { .brightness_set = pmu_led_set, }; -#ifdef CONFIG_PM -static void pmu_led_sleep_call(struct pmu_sleep_notifier *self, int when) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_blink_lock, flags); - - switch (when) { - case PBOOK_SLEEP_REQUEST: - sleeping = 1; - break; - case PBOOK_WAKE: - sleeping = 0; - break; - default: - /* do nothing */ - break; - } - spin_unlock_irqrestore(&pmu_blink_lock, flags); -} - -static struct pmu_sleep_notifier via_pmu_led_sleep_notif = { - .notifier_call = pmu_led_sleep_call, -}; -#endif - static int __init via_pmu_led_init(void) { struct device_node *dt; @@ -135,9 +108,7 @@ static int __init via_pmu_led_init(void) /* no outstanding req */ pmu_blink_req.complete = 1; pmu_blink_req.done = pmu_req_done; -#ifdef CONFIG_PM - pmu_register_sleep_notifier(&via_pmu_led_sleep_notif); -#endif + return led_classdev_register(NULL, &pmu_led); } diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 1729d3fd7a11..157080b3b468 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -310,14 +310,14 @@ int __init find_via_pmu(void) PMU_INT_TICK; if (vias->parent->name && ((strcmp(vias->parent->name, "ohare") == 0) - || device_is_compatible(vias->parent, "ohare"))) + || of_device_is_compatible(vias->parent, "ohare"))) pmu_kind = PMU_OHARE_BASED; - else if (device_is_compatible(vias->parent, "paddington")) + else if (of_device_is_compatible(vias->parent, "paddington")) pmu_kind = PMU_PADDINGTON_BASED; - else if (device_is_compatible(vias->parent, "heathrow")) + else if (of_device_is_compatible(vias->parent, "heathrow")) pmu_kind = PMU_HEATHROW_BASED; - else if (device_is_compatible(vias->parent, "Keylargo") - || device_is_compatible(vias->parent, "K2-Keylargo")) { + else if (of_device_is_compatible(vias->parent, "Keylargo") + || of_device_is_compatible(vias->parent, "K2-Keylargo")) { struct device_node *gpiop; struct device_node *adbp; u64 gaddr = OF_BAD_ADDR; @@ -2759,7 +2759,7 @@ pmu_polled_request(struct adb_request *req) #if defined(CONFIG_PM) && defined(CONFIG_PPC32) -static int pmu_sys_suspended; +int pmu_sys_suspended; static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state) { diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c index 94c117ef20c1..192b26e97777 100644 --- a/drivers/macintosh/windfarm_core.c +++ b/drivers/macintosh/windfarm_core.c @@ -27,7 +27,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/spinlock.h> -#include <linux/smp_lock.h> #include <linux/kthread.h> #include <linux/jiffies.h> #include <linux/reboot.h> diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c index ab4d1b63f63e..a0fabf3c2008 100644 --- a/drivers/macintosh/windfarm_lm75_sensor.c +++ b/drivers/macintosh/windfarm_lm75_sensor.c @@ -188,10 +188,10 @@ static int wf_lm75_attach(struct i2c_adapter *adapter) if (loc == NULL || addr == 0) continue; /* real lm75 */ - if (device_is_compatible(dev, "lm75")) + if (of_device_is_compatible(dev, "lm75")) wf_lm75_create(adapter, addr, 0, loc); /* ds1775 (compatible, better resolution */ - else if (device_is_compatible(dev, "ds1775")) + else if (of_device_is_compatible(dev, "ds1775")) wf_lm75_create(adapter, addr, 1, loc); } return 0; diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c index eaa74afa175b..5f03aab9fb5d 100644 --- a/drivers/macintosh/windfarm_max6690_sensor.c +++ b/drivers/macintosh/windfarm_max6690_sensor.c @@ -131,7 +131,7 @@ static int wf_max6690_attach(struct i2c_adapter *adapter) */ if (!pmac_i2c_match_adapter(dev, adapter)) continue; - if (!device_is_compatible(dev, "max6690")) + if (!of_device_is_compatible(dev, "max6690")) continue; addr = pmac_i2c_get_dev_addr(dev); loc = of_get_property(dev, "hwsensor-location", NULL); diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c index ff398adc0283..58c2590f05ec 100644 --- a/drivers/macintosh/windfarm_smu_controls.c +++ b/drivers/macintosh/windfarm_smu_controls.c @@ -263,7 +263,7 @@ static int __init smu_controls_init(void) /* Look for RPM fans */ for (fans = NULL; (fans = of_get_next_child(smu, fans)) != NULL;) if (!strcmp(fans->name, "rpm-fans") || - device_is_compatible(fans, "smu-rpm-fans")) + of_device_is_compatible(fans, "smu-rpm-fans")) break; for (fan = NULL; fans && (fan = of_get_next_child(fans, fan)) != NULL;) { diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c index 9a6c2cf8fd0e..1043b39aa123 100644 --- a/drivers/macintosh/windfarm_smu_sat.c +++ b/drivers/macintosh/windfarm_smu_sat.c @@ -380,7 +380,7 @@ static int wf_sat_attach(struct i2c_adapter *adapter) busnode = pmac_i2c_get_bus_node(bus); while ((dev = of_get_next_child(busnode, dev)) != NULL) - if (device_is_compatible(dev, "smu-sat")) + if (of_device_is_compatible(dev, "smu-sat")) wf_sat_create(adapter, dev); return 0; } diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index e61e0efe9ec7..5a4a74c1097c 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1456,10 +1456,10 @@ int bitmap_create(mddev_t *mddev) bitmap->offset = mddev->bitmap_offset; if (file) { get_file(file); - do_sync_file_range(file, 0, LLONG_MAX, - SYNC_FILE_RANGE_WAIT_BEFORE | - SYNC_FILE_RANGE_WRITE | - SYNC_FILE_RANGE_WAIT_AFTER); + do_sync_mapping_range(file->f_mapping, 0, LLONG_MAX, + SYNC_FILE_RANGE_WAIT_BEFORE | + SYNC_FILE_RANGE_WRITE | + SYNC_FILE_RANGE_WAIT_AFTER); } /* read superblock from bitmap file (this sets bitmap->chunksize) */ err = bitmap_read_sb(bitmap); diff --git a/drivers/media/dvb/bt8xx/dst_common.h b/drivers/media/dvb/bt8xx/dst_common.h index 3bf084f2e522..87623d203a89 100644 --- a/drivers/media/dvb/bt8xx/dst_common.h +++ b/drivers/media/dvb/bt8xx/dst_common.h @@ -22,7 +22,6 @@ #ifndef DST_COMMON_H #define DST_COMMON_H -#include <linux/smp_lock.h> #include <linux/dvb/frontend.h> #include <linux/device.h> #include <linux/mutex.h> diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 654c9e919e04..58678c05aa53 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -32,7 +32,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/delay.h> -#include <linux/smp_lock.h> #include <linux/fs.h> #include "av7110.h" diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c index e9b4e88e7932..e1c1294bb767 100644 --- a/drivers/media/dvb/ttpci/av7110_ca.c +++ b/drivers/media/dvb/ttpci/av7110_ca.c @@ -34,7 +34,6 @@ #include <linux/fs.h> #include <linux/timer.h> #include <linux/poll.h> -#include <linux/smp_lock.h> #include "av7110.h" #include "av7110_hw.h" diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index 4d7150e15d1e..70aee4eb5da4 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -33,7 +33,6 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/delay.h> -#include <linux/smp_lock.h> #include <linux/fs.h> #include "av7110.h" diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c index cde5d3ae7ec7..fcd9994058d0 100644 --- a/drivers/media/dvb/ttpci/av7110_v4l.c +++ b/drivers/media/dvb/ttpci/av7110_v4l.c @@ -31,7 +31,6 @@ #include <linux/fs.h> #include <linux/timer.h> #include <linux/poll.h> -#include <linux/smp_lock.h> #include "av7110.h" #include "av7110_hw.h" diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index df8d0520d1d1..449df1bb00d3 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -79,7 +79,6 @@ #include <linux/videodev2.h> #include <media/v4l2-common.h> #include <linux/usb.h> -#include <linux/smp_lock.h> /* * Version Information diff --git a/drivers/media/video/cpia.h b/drivers/media/video/cpia.h index 6eaa692021c5..78392fb6f94e 100644 --- a/drivers/media/video/cpia.h +++ b/drivers/media/video/cpia.h @@ -47,7 +47,6 @@ #include <linux/videodev.h> #include <media/v4l2-common.h> #include <linux/list.h> -#include <linux/smp_lock.h> #include <linux/mutex.h> struct cpia_camera_ops diff --git a/drivers/media/video/cpia_pp.c b/drivers/media/video/cpia_pp.c index 19711aaf9a3e..c431df8248d6 100644 --- a/drivers/media/video/cpia_pp.c +++ b/drivers/media/video/cpia_pp.c @@ -34,7 +34,6 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/workqueue.h> -#include <linux/smp_lock.h> #include <linux/sched.h> #include <linux/kmod.h> diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c index e627062fde3a..259ea08e784f 100644 --- a/drivers/media/video/cx88/cx88-tvaudio.c +++ b/drivers/media/video/cx88/cx88-tvaudio.c @@ -49,7 +49,6 @@ #include <linux/interrupt.h> #include <linux/vmalloc.h> #include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <linux/kthread.h> diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index ff4b238090ac..a5731f90be0f 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -37,7 +37,6 @@ #include <asm/atomic.h> #include <linux/delay.h> #include <linux/usb.h> -#include <linux/smp_lock.h> #include <linux/mutex.h> #include "dabusb.h" diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h index 68b082bcee1d..18c64222dd11 100644 --- a/drivers/media/video/ov511.h +++ b/drivers/media/video/ov511.h @@ -4,7 +4,6 @@ #include <asm/uaccess.h> #include <linux/videodev.h> #include <media/v4l2-common.h> -#include <linux/smp_lock.h> #include <linux/usb.h> #include <linux/mutex.h> diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c index e976c484c058..9ea41c6699bb 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-main.c +++ b/drivers/media/video/pvrusb2/pvrusb2-main.c @@ -25,7 +25,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/moduleparam.h> -#include <linux/smp_lock.h> #include <linux/usb.h> #include <linux/videodev2.h> diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c index dd759d6d8d25..7b56041186dc 100644 --- a/drivers/media/video/saa7134/saa7134-tvaudio.c +++ b/drivers/media/video/saa7134/saa7134-tvaudio.c @@ -27,7 +27,6 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/delay.h> -#include <linux/smp_lock.h> #include <asm/div64.h> #include "saa7134-reg.h" diff --git a/drivers/media/video/se401.h b/drivers/media/video/se401.h index c0891b3e0018..835ef872e803 100644 --- a/drivers/media/video/se401.h +++ b/drivers/media/video/se401.h @@ -5,7 +5,6 @@ #include <asm/uaccess.h> #include <linux/videodev.h> #include <media/v4l2-common.h> -#include <linux/smp_lock.h> #include <linux/mutex.h> #define se401_DEBUG /* Turn on debug messages */ diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index a2da5d2affff..c9bf9dbc2ea3 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -26,7 +26,6 @@ #include <linux/videodev.h> #include <linux/i2c.h> #include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/kthread.h> #include <linux/freezer.h> diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c index 687f026753b2..37ce36b9e587 100644 --- a/drivers/media/video/usbvideo/usbvideo.c +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -20,7 +20,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/mm.h> -#include <linux/smp_lock.h> #include <linux/vmalloc.h> #include <linux/init.h> #include <linux/spinlock.h> diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c index bcb551adb7e6..9118a6227ea6 100644 --- a/drivers/media/video/usbvision/usbvision-core.c +++ b/drivers/media/video/usbvision/usbvision-core.c @@ -30,7 +30,6 @@ #include <linux/mm.h> #include <linux/utsname.h> #include <linux/highmem.h> -#include <linux/smp_lock.h> #include <linux/videodev.h> #include <linux/vmalloc.h> #include <linux/module.h> diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 216704170a4c..aa3258bbb4af 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -52,7 +52,6 @@ #include <linux/mm.h> #include <linux/utsname.h> #include <linux/highmem.h> -#include <linux/smp_lock.h> #include <linux/videodev.h> #include <linux/vmalloc.h> #include <linux/module.h> diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index d2c1ae0dbfba..a861e150865e 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -23,7 +23,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/mm.h> #include <linux/fs.h> #include <linux/file.h> diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 49f1df74aa21..13ee550d3215 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -47,7 +47,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/smp_lock.h> #include <linux/mm.h> #include <linux/string.h> #include <linux/errno.h> diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index 80ac5f86d9e5..5263b50463e1 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -30,7 +30,6 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/smp_lock.h> #include <linux/mm.h> #include <linux/string.h> #include <linux/errno.h> diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index 074323733352..cf0ed6cbb0e3 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -2034,7 +2034,7 @@ zoran_do_ioctl (struct inode *inode, * but moving the free code outside the munmap() handler fixes * all this... If someone knows why, please explain me (Ronald) */ - if (!!mutex_trylock(&zr->resource_lock)) { + if (mutex_trylock(&zr->resource_lock)) { /* we obtained it! Let's try to free some things */ if (fh->jpg_buffers.ready_to_be_freed) jpg_fbuffer_free(file); diff --git a/drivers/message/i2o/i2o_lan.h b/drivers/message/i2o/i2o_lan.h deleted file mode 100644 index 6502b817df58..000000000000 --- a/drivers/message/i2o/i2o_lan.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - * i2o_lan.h I2O LAN Class definitions - * - * I2O LAN CLASS OSM May 26th 2000 - * - * (C) Copyright 1999, 2000 University of Helsinki, - * Department of Computer Science - * - * This code is still under development / test. - * - * Author: Auvo Häkkinen <Auvo.Hakkinen@cs.Helsinki.FI> - * Juha Sievänen <Juha.Sievanen@cs.Helsinki.FI> - * Taneli Vähäkangas <Taneli.Vahakangas@cs.Helsinki.FI> - */ - -#ifndef _I2O_LAN_H -#define _I2O_LAN_H - -/* Default values for tunable parameters first */ - -#define I2O_LAN_MAX_BUCKETS_OUT 96 -#define I2O_LAN_BUCKET_THRESH 18 /* 9 buckets in one message */ -#define I2O_LAN_RX_COPYBREAK 200 -#define I2O_LAN_TX_TIMEOUT (1*HZ) -#define I2O_LAN_TX_BATCH_MODE 2 /* 2=automatic, 1=on, 0=off */ -#define I2O_LAN_EVENT_MASK 0 /* 0=None, 0xFFC00002=All */ - -/* LAN types */ -#define I2O_LAN_ETHERNET 0x0030 -#define I2O_LAN_100VG 0x0040 -#define I2O_LAN_TR 0x0050 -#define I2O_LAN_FDDI 0x0060 -#define I2O_LAN_FIBRE_CHANNEL 0x0070 -#define I2O_LAN_UNKNOWN 0x00000000 - -/* Connector types */ - -/* Ethernet */ -#define I2O_LAN_AUI (I2O_LAN_ETHERNET << 4) + 0x00000001 -#define I2O_LAN_10BASE5 (I2O_LAN_ETHERNET << 4) + 0x00000002 -#define I2O_LAN_FIORL (I2O_LAN_ETHERNET << 4) + 0x00000003 -#define I2O_LAN_10BASE2 (I2O_LAN_ETHERNET << 4) + 0x00000004 -#define I2O_LAN_10BROAD36 (I2O_LAN_ETHERNET << 4) + 0x00000005 -#define I2O_LAN_10BASE_T (I2O_LAN_ETHERNET << 4) + 0x00000006 -#define I2O_LAN_10BASE_FP (I2O_LAN_ETHERNET << 4) + 0x00000007 -#define I2O_LAN_10BASE_FB (I2O_LAN_ETHERNET << 4) + 0x00000008 -#define I2O_LAN_10BASE_FL (I2O_LAN_ETHERNET << 4) + 0x00000009 -#define I2O_LAN_100BASE_TX (I2O_LAN_ETHERNET << 4) + 0x0000000A -#define I2O_LAN_100BASE_FX (I2O_LAN_ETHERNET << 4) + 0x0000000B -#define I2O_LAN_100BASE_T4 (I2O_LAN_ETHERNET << 4) + 0x0000000C -#define I2O_LAN_1000BASE_SX (I2O_LAN_ETHERNET << 4) + 0x0000000D -#define I2O_LAN_1000BASE_LX (I2O_LAN_ETHERNET << 4) + 0x0000000E -#define I2O_LAN_1000BASE_CX (I2O_LAN_ETHERNET << 4) + 0x0000000F -#define I2O_LAN_1000BASE_T (I2O_LAN_ETHERNET << 4) + 0x00000010 - -/* AnyLAN */ -#define I2O_LAN_100VG_ETHERNET (I2O_LAN_100VG << 4) + 0x00000001 -#define I2O_LAN_100VG_TR (I2O_LAN_100VG << 4) + 0x00000002 - -/* Token Ring */ -#define I2O_LAN_4MBIT (I2O_LAN_TR << 4) + 0x00000001 -#define I2O_LAN_16MBIT (I2O_LAN_TR << 4) + 0x00000002 - -/* FDDI */ -#define I2O_LAN_125MBAUD (I2O_LAN_FDDI << 4) + 0x00000001 - -/* Fibre Channel */ -#define I2O_LAN_POINT_POINT (I2O_LAN_FIBRE_CHANNEL << 4) + 0x00000001 -#define I2O_LAN_ARB_LOOP (I2O_LAN_FIBRE_CHANNEL << 4) + 0x00000002 -#define I2O_LAN_PUBLIC_LOOP (I2O_LAN_FIBRE_CHANNEL << 4) + 0x00000003 -#define I2O_LAN_FABRIC (I2O_LAN_FIBRE_CHANNEL << 4) + 0x00000004 - -#define I2O_LAN_EMULATION 0x00000F00 -#define I2O_LAN_OTHER 0x00000F01 -#define I2O_LAN_DEFAULT 0xFFFFFFFF - -/* LAN class functions */ - -#define LAN_PACKET_SEND 0x3B -#define LAN_SDU_SEND 0x3D -#define LAN_RECEIVE_POST 0x3E -#define LAN_RESET 0x35 -#define LAN_SUSPEND 0x37 - -/* LAN DetailedStatusCode defines */ -#define I2O_LAN_DSC_SUCCESS 0x00 -#define I2O_LAN_DSC_DEVICE_FAILURE 0x01 -#define I2O_LAN_DSC_DESTINATION_NOT_FOUND 0x02 -#define I2O_LAN_DSC_TRANSMIT_ERROR 0x03 -#define I2O_LAN_DSC_TRANSMIT_ABORTED 0x04 -#define I2O_LAN_DSC_RECEIVE_ERROR 0x05 -#define I2O_LAN_DSC_RECEIVE_ABORTED 0x06 -#define I2O_LAN_DSC_DMA_ERROR 0x07 -#define I2O_LAN_DSC_BAD_PACKET_DETECTED 0x08 -#define I2O_LAN_DSC_OUT_OF_MEMORY 0x09 -#define I2O_LAN_DSC_BUCKET_OVERRUN 0x0A -#define I2O_LAN_DSC_IOP_INTERNAL_ERROR 0x0B -#define I2O_LAN_DSC_CANCELED 0x0C -#define I2O_LAN_DSC_INVALID_TRANSACTION_CONTEXT 0x0D -#define I2O_LAN_DSC_DEST_ADDRESS_DETECTED 0x0E -#define I2O_LAN_DSC_DEST_ADDRESS_OMITTED 0x0F -#define I2O_LAN_DSC_PARTIAL_PACKET_RETURNED 0x10 -#define I2O_LAN_DSC_SUSPENDED 0x11 - -struct i2o_packet_info { - u32 offset:24; - u32 flags:8; - u32 len:24; - u32 status:8; -}; - -struct i2o_bucket_descriptor { - u32 context; /* FIXME: 64bit support */ - struct i2o_packet_info packet_info[1]; -}; - -/* Event Indicator Mask Flags for LAN OSM */ - -#define I2O_LAN_EVT_LINK_DOWN 0x01 -#define I2O_LAN_EVT_LINK_UP 0x02 -#define I2O_LAN_EVT_MEDIA_CHANGE 0x04 - -#include <linux/netdevice.h> -#include <linux/fddidevice.h> - -struct i2o_lan_local { - u8 unit; - struct i2o_device *i2o_dev; - - struct fddi_statistics stats; /* see also struct net_device_stats */ - unsigned short (*type_trans) (struct sk_buff *, struct net_device *); - atomic_t buckets_out; /* nbr of unused buckets on DDM */ - atomic_t tx_out; /* outstanding TXes */ - u8 tx_count; /* packets in one TX message frame */ - u16 tx_max_out; /* DDM's Tx queue len */ - u8 sgl_max; /* max SGLs in one message frame */ - u32 m; /* IOP address of the batch msg frame */ - - struct work_struct i2o_batch_send_task; - int send_active; - struct sk_buff **i2o_fbl; /* Free bucket list (to reuse skbs) */ - int i2o_fbl_tail; - spinlock_t fbl_lock; - - spinlock_t tx_lock; - - u32 max_size_mc_table; /* max number of multicast addresses */ - - /* LAN OSM configurable parameters are here: */ - - u16 max_buckets_out; /* max nbr of buckets to send to DDM */ - u16 bucket_thresh; /* send more when this many used */ - u16 rx_copybreak; - - u8 tx_batch_mode; /* Set when using batch mode sends */ - u32 i2o_event_mask; /* To turn on interesting event flags */ -}; - -#endif /* _I2O_LAN_H */ diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index ce1a48108210..cb8c264eaff0 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -21,7 +21,6 @@ #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/sched.h> #include <linux/completion.h> #include <linux/delay.h> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index a3c525b2616a..877e7909a0e5 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -25,6 +25,15 @@ config IBM_ASM information on the specific driver level and support statement for your IBM server. +config PHANTOM + tristate "Sensable PHANToM" + depends on PCI + help + Say Y here if you want to build a driver for Sensable PHANToM device. + + If you choose to build module, its name will be phantom. If unsure, + say N here. + If unsure, say N. @@ -178,4 +187,13 @@ config THINKPAD_ACPI_BAY If you are not sure, say Y here. +config BLINK + tristate "Keyboard blink driver" + help + Driver that when loaded will blink the keyboard LEDs continuously. + This is useful for debugging and for kernels that cannot necessarily + output something to the screen like kexec kernels to give the user + a visual indication that the kernel is doing something. + + endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index e32516459138..5b6d46de005c 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -7,9 +7,11 @@ obj-$(CONFIG_IBM_ASM) += ibmasm/ obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/ obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o +obj-$(CONFIG_BLINK) += blink.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o +obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_SGI_IOC4) += ioc4.o obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o diff --git a/drivers/misc/blink.c b/drivers/misc/blink.c new file mode 100644 index 000000000000..634431ce1184 --- /dev/null +++ b/drivers/misc/blink.c @@ -0,0 +1,27 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/timer.h> +#include <linux/jiffies.h> + +static void do_blink(unsigned long data); + +static DEFINE_TIMER(blink_timer, do_blink, 0 ,0); + +static void do_blink(unsigned long data) +{ + static long count; + if (panic_blink) + panic_blink(count++); + blink_timer.expires = jiffies + msecs_to_jiffies(1); + add_timer(&blink_timer); +} + +static int blink_init(void) +{ + printk(KERN_INFO "Enabling keyboard blinking\n"); + do_blink(0); + return 0; +} + +module_init(blink_init); + diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c new file mode 100644 index 000000000000..35b139b0e5f2 --- /dev/null +++ b/drivers/misc/phantom.c @@ -0,0 +1,463 @@ +/* + * Copyright (C) 2005-2007 Jiri Slaby <jirislaby@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * You need an userspace library to cooperate with this driver. It (and other + * info) may be obtained here: + * http://www.fi.muni.cz/~xslaby/phantom.html + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/pci.h> +#include <linux/fs.h> +#include <linux/poll.h> +#include <linux/interrupt.h> +#include <linux/cdev.h> +#include <linux/phantom.h> + +#include <asm/atomic.h> +#include <asm/io.h> + +#define PHANTOM_VERSION "n0.9.5" + +#define PHANTOM_MAX_MINORS 8 + +#define PHN_IRQCTL 0x4c /* irq control in caddr space */ + +#define PHB_RUNNING 1 + +static struct class *phantom_class; +static int phantom_major; + +struct phantom_device { + unsigned int opened; + void __iomem *caddr; + u32 __iomem *iaddr; + u32 __iomem *oaddr; + unsigned long status; + atomic_t counter; + + wait_queue_head_t wait; + struct cdev cdev; + + struct mutex open_lock; +}; + +static unsigned char phantom_devices[PHANTOM_MAX_MINORS]; + +static int phantom_status(struct phantom_device *dev, unsigned long newstat) +{ + pr_debug("phantom_status %lx %lx\n", dev->status, newstat); + + if (!(dev->status & PHB_RUNNING) && (newstat & PHB_RUNNING)) { + atomic_set(&dev->counter, 0); + iowrite32(PHN_CTL_IRQ, dev->iaddr + PHN_CONTROL); + iowrite32(0x43, dev->caddr + PHN_IRQCTL); + } else if ((dev->status & PHB_RUNNING) && !(newstat & PHB_RUNNING)) + iowrite32(0, dev->caddr + PHN_IRQCTL); + + dev->status = newstat; + + return 0; +} + +/* + * File ops + */ + +static int phantom_ioctl(struct inode *inode, struct file *file, u_int cmd, + u_long arg) +{ + struct phantom_device *dev = file->private_data; + struct phm_regs rs; + struct phm_reg r; + void __user *argp = (void __user *)arg; + unsigned int i; + + if (_IOC_TYPE(cmd) != PH_IOC_MAGIC || + _IOC_NR(cmd) > PH_IOC_MAXNR) + return -ENOTTY; + + switch (cmd) { + case PHN_SET_REG: + if (copy_from_user(&r, argp, sizeof(r))) + return -EFAULT; + + if (r.reg > 7) + return -EINVAL; + + if (r.reg == PHN_CONTROL && (r.value & PHN_CTL_IRQ) && + phantom_status(dev, dev->status | PHB_RUNNING)) + return -ENODEV; + + pr_debug("phantom: writing %x to %u\n", r.value, r.reg); + iowrite32(r.value, dev->iaddr + r.reg); + + if (r.reg == PHN_CONTROL && !(r.value & PHN_CTL_IRQ)) + phantom_status(dev, dev->status & ~PHB_RUNNING); + break; + case PHN_SET_REGS: + if (copy_from_user(&rs, argp, sizeof(rs))) + return -EFAULT; + + pr_debug("phantom: SRS %u regs %x\n", rs.count, rs.mask); + for (i = 0; i < min(rs.count, 8U); i++) + if ((1 << i) & rs.mask) + iowrite32(rs.values[i], dev->oaddr + i); + break; + case PHN_GET_REG: + if (copy_from_user(&r, argp, sizeof(r))) + return -EFAULT; + + if (r.reg > 7) + return -EINVAL; + + r.value = ioread32(dev->iaddr + r.reg); + + if (copy_to_user(argp, &r, sizeof(r))) + return -EFAULT; + break; + case PHN_GET_REGS: + if (copy_from_user(&rs, argp, sizeof(rs))) + return -EFAULT; + + pr_debug("phantom: GRS %u regs %x\n", rs.count, rs.mask); + for (i = 0; i < min(rs.count, 8U); i++) + if ((1 << i) & rs.mask) + rs.values[i] = ioread32(dev->iaddr + i); + + if (copy_to_user(argp, &rs, sizeof(rs))) + return -EFAULT; + break; + default: + return -ENOTTY; + } + + return 0; +} + +static int phantom_open(struct inode *inode, struct file *file) +{ + struct phantom_device *dev = container_of(inode->i_cdev, + struct phantom_device, cdev); + + nonseekable_open(inode, file); + + if (mutex_lock_interruptible(&dev->open_lock)) + return -ERESTARTSYS; + + if (dev->opened) { + mutex_unlock(&dev->open_lock); + return -EINVAL; + } + + file->private_data = dev; + + dev->opened++; + mutex_unlock(&dev->open_lock); + + return 0; +} + +static int phantom_release(struct inode *inode, struct file *file) +{ + struct phantom_device *dev = file->private_data; + + mutex_lock(&dev->open_lock); + + dev->opened = 0; + phantom_status(dev, dev->status & ~PHB_RUNNING); + + mutex_unlock(&dev->open_lock); + + return 0; +} + +static unsigned int phantom_poll(struct file *file, poll_table *wait) +{ + struct phantom_device *dev = file->private_data; + unsigned int mask = 0; + + pr_debug("phantom_poll: %d\n", atomic_read(&dev->counter)); + poll_wait(file, &dev->wait, wait); + if (atomic_read(&dev->counter)) { + mask = POLLIN | POLLRDNORM; + atomic_dec(&dev->counter); + } else if ((dev->status & PHB_RUNNING) == 0) + mask = POLLIN | POLLRDNORM | POLLERR; + pr_debug("phantom_poll end: %x/%d\n", mask, atomic_read(&dev->counter)); + + return mask; +} + +static struct file_operations phantom_file_ops = { + .open = phantom_open, + .release = phantom_release, + .ioctl = phantom_ioctl, + .poll = phantom_poll, +}; + +static irqreturn_t phantom_isr(int irq, void *data) +{ + struct phantom_device *dev = data; + + if (!(ioread32(dev->iaddr + PHN_CONTROL) & PHN_CTL_IRQ)) + return IRQ_NONE; + + iowrite32(0, dev->iaddr); + iowrite32(0xc0, dev->iaddr); + + atomic_inc(&dev->counter); + wake_up_interruptible(&dev->wait); + + return IRQ_HANDLED; +} + +/* + * Init and deinit driver + */ + +static unsigned int __devinit phantom_get_free(void) +{ + unsigned int i; + + for (i = 0; i < PHANTOM_MAX_MINORS; i++) + if (phantom_devices[i] == 0) + break; + + return i; +} + +static int __devinit phantom_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct phantom_device *pht; + unsigned int minor; + int retval; + + retval = pci_enable_device(pdev); + if (retval) + goto err; + + minor = phantom_get_free(); + if (minor == PHANTOM_MAX_MINORS) { + dev_err(&pdev->dev, "too many devices found!\n"); + retval = -EIO; + goto err_dis; + } + + phantom_devices[minor] = 1; + + retval = pci_request_regions(pdev, "phantom"); + if (retval) + goto err_null; + + retval = -ENOMEM; + pht = kzalloc(sizeof(*pht), GFP_KERNEL); + if (pht == NULL) { + dev_err(&pdev->dev, "unable to allocate device\n"); + goto err_reg; + } + + pht->caddr = pci_iomap(pdev, 0, 0); + if (pht->caddr == NULL) { + dev_err(&pdev->dev, "can't remap conf space\n"); + goto err_fr; + } + pht->iaddr = pci_iomap(pdev, 2, 0); + if (pht->iaddr == NULL) { + dev_err(&pdev->dev, "can't remap input space\n"); + goto err_unmc; + } + pht->oaddr = pci_iomap(pdev, 3, 0); + if (pht->oaddr == NULL) { + dev_err(&pdev->dev, "can't remap output space\n"); + goto err_unmi; + } + + mutex_init(&pht->open_lock); + init_waitqueue_head(&pht->wait); + cdev_init(&pht->cdev, &phantom_file_ops); + pht->cdev.owner = THIS_MODULE; + + iowrite32(0, pht->caddr + PHN_IRQCTL); + retval = request_irq(pdev->irq, phantom_isr, + IRQF_SHARED | IRQF_DISABLED, "phantom", pht); + if (retval) { + dev_err(&pdev->dev, "can't establish ISR\n"); + goto err_unmo; + } + + retval = cdev_add(&pht->cdev, MKDEV(phantom_major, minor), 1); + if (retval) { + dev_err(&pdev->dev, "chardev registration failed\n"); + goto err_irq; + } + + if (IS_ERR(device_create(phantom_class, &pdev->dev, MKDEV(phantom_major, + minor), "phantom%u", minor))) + dev_err(&pdev->dev, "can't create device\n"); + + pci_set_drvdata(pdev, pht); + + return 0; +err_irq: + free_irq(pdev->irq, pht); +err_unmo: + pci_iounmap(pdev, pht->oaddr); +err_unmi: + pci_iounmap(pdev, pht->iaddr); +err_unmc: + pci_iounmap(pdev, pht->caddr); +err_fr: + kfree(pht); +err_reg: + pci_release_regions(pdev); +err_null: + phantom_devices[minor] = 0; +err_dis: + pci_disable_device(pdev); +err: + return retval; +} + +static void __devexit phantom_remove(struct pci_dev *pdev) +{ + struct phantom_device *pht = pci_get_drvdata(pdev); + unsigned int minor = MINOR(pht->cdev.dev); + + device_destroy(phantom_class, MKDEV(phantom_major, minor)); + + cdev_del(&pht->cdev); + + iowrite32(0, pht->caddr + PHN_IRQCTL); + free_irq(pdev->irq, pht); + + pci_iounmap(pdev, pht->oaddr); + pci_iounmap(pdev, pht->iaddr); + pci_iounmap(pdev, pht->caddr); + + kfree(pht); + + pci_release_regions(pdev); + + phantom_devices[minor] = 0; + + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM +static int phantom_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct phantom_device *dev = pci_get_drvdata(pdev); + + iowrite32(0, dev->caddr + PHN_IRQCTL); + + return 0; +} + +static int phantom_resume(struct pci_dev *pdev) +{ + struct phantom_device *dev = pci_get_drvdata(pdev); + + iowrite32(0, dev->caddr + PHN_IRQCTL); + + return 0; +} +#else +#define phantom_suspend NULL +#define phantom_resume NULL +#endif + +static struct pci_device_id phantom_pci_tbl[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050), + .class = PCI_CLASS_BRIDGE_OTHER << 8, .class_mask = 0xffff00 }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, phantom_pci_tbl); + +static struct pci_driver phantom_pci_driver = { + .name = "phantom", + .id_table = phantom_pci_tbl, + .probe = phantom_probe, + .remove = __devexit_p(phantom_remove), + .suspend = phantom_suspend, + .resume = phantom_resume +}; + +static ssize_t phantom_show_version(struct class *cls, char *buf) +{ + return sprintf(buf, PHANTOM_VERSION "\n"); +} + +static CLASS_ATTR(version, 0444, phantom_show_version, NULL); + +static int __init phantom_init(void) +{ + int retval; + dev_t dev; + + phantom_class = class_create(THIS_MODULE, "phantom"); + if (IS_ERR(phantom_class)) { + retval = PTR_ERR(phantom_class); + printk(KERN_ERR "phantom: can't register phantom class\n"); + goto err; + } + retval = class_create_file(phantom_class, &class_attr_version); + if (retval) { + printk(KERN_ERR "phantom: can't create sysfs version file\n"); + goto err_class; + } + + retval = alloc_chrdev_region(&dev, 0, PHANTOM_MAX_MINORS, "phantom"); + if (retval) { + printk(KERN_ERR "phantom: can't register character device\n"); + goto err_attr; + } + phantom_major = MAJOR(dev); + + retval = pci_register_driver(&phantom_pci_driver); + if (retval) { + printk(KERN_ERR "phantom: can't register pci driver\n"); + goto err_unchr; + } + + printk(KERN_INFO "Phantom Linux Driver, version " PHANTOM_VERSION ", " + "init OK\n"); + + return 0; +err_unchr: + unregister_chrdev_region(dev, PHANTOM_MAX_MINORS); +err_attr: + class_remove_file(phantom_class, &class_attr_version); +err_class: + class_destroy(phantom_class); +err: + return retval; +} + +static void __exit phantom_exit(void) +{ + pci_unregister_driver(&phantom_pci_driver); + + unregister_chrdev_region(MKDEV(phantom_major, 0), PHANTOM_MAX_MINORS); + + class_remove_file(phantom_class, &class_attr_version); + class_destroy(phantom_class); + + pr_debug("phantom: module successfully removed\n"); +} + +module_init(phantom_init); +module_exit(phantom_exit); + +MODULE_AUTHOR("Jiri Slaby <jirislaby@gmail.com>"); +MODULE_DESCRIPTION("Sensable Phantom driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(PHANTOM_VERSION); diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 7efe744ad31e..72107dc06d67 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -48,7 +48,7 @@ static int parse_flash_partitions(struct device_node *node, const u32 *part; const char *name; - part = get_property(node, "partitions", &plen); + part = of_get_property(node, "partitions", &plen); if (part == NULL) goto err; @@ -59,7 +59,7 @@ static int parse_flash_partitions(struct device_node *node, goto err; } - name = get_property(node, "partition-names", &plen); + name = of_get_property(node, "partition-names", &plen); for (i = 0; i < retval; i++) { (*parts)[i].offset = *part++; @@ -153,7 +153,7 @@ static int __devinit of_physmap_probe(struct of_device *dev, const struct of_dev goto err_out; } - width = get_property(dp, "bank-width", NULL); + width = of_get_property(dp, "bank-width", NULL); if (width == NULL) { dev_err(&dev->dev, "Can't get the flash bank width!\n"); err = -EINVAL; @@ -174,7 +174,7 @@ static int __devinit of_physmap_probe(struct of_device *dev, const struct of_dev simple_map_init(&info->map); - of_probe = get_property(dp, "probe-type", NULL); + of_probe = of_get_property(dp, "probe-type", NULL); if (of_probe == NULL) { probe_type = rom_probe_types; for (; info->mtd == NULL && *probe_type != NULL; probe_type++) diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 524b83b5ebf5..51bc7e2f1f22 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -216,7 +216,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new) int last_devnum = -1; struct gendisk *gd; - if (!!mutex_trylock(&mtd_table_mutex)) { + if (mutex_trylock(&mtd_table_mutex)) { mutex_unlock(&mtd_table_mutex); BUG(); } @@ -294,7 +294,7 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new) int del_mtd_blktrans_dev(struct mtd_blktrans_dev *old) { - if (!!mutex_trylock(&mtd_table_mutex)) { + if (mutex_trylock(&mtd_table_mutex)) { mutex_unlock(&mtd_table_mutex); BUG(); } diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 279ec625cec4..b86ccd2ecd5b 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1104,7 +1104,7 @@ config ETH16I config NE2000 tristate "NE2000/NE1000 support" - depends on NET_ISA || (Q40 && m) || M32R + depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938 select CRC32 ---help--- If you have a network (Ethernet) card of this type, say Y and read @@ -2488,6 +2488,7 @@ config NETXEN_NIC config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" depends on PPC64 && PCI + select PHYLIB help This driver supports the on-chip 1/10Gbit Ethernet controller on PA Semi's PWRficient line of chips. diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 152fa7a042b8..ef2cc80256a3 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -225,6 +225,16 @@ static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id) if (!(phy & ((1 << 2) | 1))) goto done; } + else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */ + read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy); + if (!(phy & ((1 << 2) | 1))) + goto done; + } + else if (lp->phy_type == MII_DP83848_ID) { + read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */ + if (!(phy & (1 << 7))) + goto done; + } update_linkspeed(dev, 0); @@ -280,6 +290,19 @@ static void enable_phyirq(struct net_device *dev) dsintr = (1 << 10) | ( 1 << 8); write_phy(lp->phy_address, MII_TPISTATUS, dsintr); } + else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */ + read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr); + dsintr = dsintr | 0x500; /* set bits 8, 10 */ + write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr); + } + else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */ + read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr); + dsintr = dsintr | 0x3c; /* set bits 2..5 */ + write_phy(lp->phy_address, MII_DPMISR_REG, dsintr); + read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr); + dsintr = dsintr | 0x3; /* set bits 0,1 */ + write_phy(lp->phy_address, MII_DPMICR_REG, dsintr); + } disable_mdi(); spin_unlock_irq(&lp->lock); @@ -323,6 +346,19 @@ static void disable_phyirq(struct net_device *dev) dsintr = ~((1 << 10) | (1 << 8)); write_phy(lp->phy_address, MII_TPISTATUS, dsintr); } + else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */ + read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr); + dsintr = dsintr & ~0x500; /* clear bits 8, 10 */ + write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr); + } + else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */ + read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr); + dsintr = dsintr & ~0x3; /* clear bits 0, 1 */ + write_phy(lp->phy_address, MII_DPMICR_REG, dsintr); + read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr); + dsintr = dsintr & ~0x3c; /* clear bits 2..5 */ + write_phy(lp->phy_address, MII_DPMISR_REG, dsintr); + } disable_mdi(); spin_unlock_irq(&lp->lock); @@ -535,8 +571,8 @@ static void at91ether_sethashtable(struct net_device *dev) mc_filter[bitnr >> 5] |= 1 << (bitnr & 31); } - at91_emac_write(AT91_EMAC_HSH, mc_filter[0]); - at91_emac_write(AT91_EMAC_HSL, mc_filter[1]); + at91_emac_write(AT91_EMAC_HSL, mc_filter[0]); + at91_emac_write(AT91_EMAC_HSH, mc_filter[1]); } /* @@ -1062,10 +1098,16 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name); else if (phy_type == MII_DP83847_ID) printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name); + else if (phy_type == MII_DP83848_ID) + printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name); else if (phy_type == MII_AC101L_ID) printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name); else if (phy_type == MII_KS8721_ID) printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name); + else if (phy_type == MII_T78Q21x3_ID) + printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name); + else if (phy_type == MII_LAN83C185_ID) + printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name); return 0; } @@ -1103,8 +1145,11 @@ static int __init at91ether_probe(struct platform_device *pdev) case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */ case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */ case MII_DP83847_ID: /* National Semiconductor DP83847: */ + case MII_DP83848_ID: /* National Semiconductor DP83848: */ case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */ case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */ + case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */ + case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */ detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk); break; } diff --git a/drivers/net/arm/at91_ether.h b/drivers/net/arm/at91_ether.h index b6b665de2ea0..a38fd2d053a6 100644 --- a/drivers/net/arm/at91_ether.h +++ b/drivers/net/arm/at91_ether.h @@ -17,39 +17,46 @@ /* Davicom 9161 PHY */ -#define MII_DM9161_ID 0x0181b880 -#define MII_DM9161A_ID 0x0181b8a0 - -/* Davicom specific registers */ -#define MII_DSCR_REG 16 -#define MII_DSCSR_REG 17 -#define MII_DSINTR_REG 21 +#define MII_DM9161_ID 0x0181b880 +#define MII_DM9161A_ID 0x0181b8a0 +#define MII_DSCR_REG 16 +#define MII_DSCSR_REG 17 +#define MII_DSINTR_REG 21 /* Intel LXT971A PHY */ -#define MII_LXT971A_ID 0x001378E0 - -/* Intel specific registers */ -#define MII_ISINTE_REG 18 -#define MII_ISINTS_REG 19 -#define MII_LEDCTRL_REG 20 +#define MII_LXT971A_ID 0x001378E0 +#define MII_ISINTE_REG 18 +#define MII_ISINTS_REG 19 +#define MII_LEDCTRL_REG 20 /* Realtek RTL8201 PHY */ -#define MII_RTL8201_ID 0x00008200 +#define MII_RTL8201_ID 0x00008200 /* Broadcom BCM5221 PHY */ -#define MII_BCM5221_ID 0x004061e0 - -/* Broadcom specific registers */ -#define MII_BCMINTR_REG 26 +#define MII_BCM5221_ID 0x004061e0 +#define MII_BCMINTR_REG 26 /* National Semiconductor DP83847 */ -#define MII_DP83847_ID 0x20005c30 +#define MII_DP83847_ID 0x20005c30 + +/* National Semiconductor DP83848 */ +#define MII_DP83848_ID 0x20005c90 +#define MII_DPPHYSTS_REG 16 +#define MII_DPMICR_REG 17 +#define MII_DPMISR_REG 18 /* Altima AC101L PHY */ -#define MII_AC101L_ID 0x00225520 +#define MII_AC101L_ID 0x00225520 /* Micrel KS8721 PHY */ -#define MII_KS8721_ID 0x00221610 +#define MII_KS8721_ID 0x00221610 + +/* Teridian 78Q2123/78Q2133 */ +#define MII_T78Q21x3_ID 0x000e7230 +#define MII_T78Q21INT_REG 17 + +/* SMSC LAN83C185 */ +#define MII_LAN83C185_ID 0x0007C0A0 /* ........................................................................ */ diff --git a/drivers/net/atl1/atl1_ethtool.c b/drivers/net/atl1/atl1_ethtool.c index c11c27798e5c..1f616c5c1473 100644 --- a/drivers/net/atl1/atl1_ethtool.c +++ b/drivers/net/atl1/atl1_ethtool.c @@ -156,8 +156,7 @@ static int atl1_set_settings(struct net_device *netdev, u16 old_media_type = hw->media_type; if (netif_running(adapter->netdev)) { - printk(KERN_DEBUG "%s: ethtool shutting down adapter\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "ethtool shutting down adapter\n"); atl1_down(adapter); } @@ -166,9 +165,8 @@ static int atl1_set_settings(struct net_device *netdev, else { if (ecmd->speed == SPEED_1000) { if (ecmd->duplex != DUPLEX_FULL) { - printk(KERN_WARNING - "%s: can't force to 1000M half duplex\n", - atl1_driver_name); + dev_warn(&adapter->pdev->dev, + "can't force to 1000M half duplex\n"); ret_val = -EINVAL; goto exit_sset; } @@ -206,9 +204,8 @@ static int atl1_set_settings(struct net_device *netdev, } if (atl1_phy_setup_autoneg_adv(hw)) { ret_val = -EINVAL; - printk(KERN_WARNING - "%s: invalid ethtool speed/duplex setting\n", - atl1_driver_name); + dev_warn(&adapter->pdev->dev, + "invalid ethtool speed/duplex setting\n"); goto exit_sset; } if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR || @@ -239,12 +236,10 @@ exit_sset: hw->media_type = old_media_type; if (netif_running(adapter->netdev)) { - printk(KERN_DEBUG "%s: ethtool starting adapter\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "ethtool starting adapter\n"); atl1_up(adapter); } else if (!ret_val) { - printk(KERN_DEBUG "%s: ethtool resetting adapter\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "ethtool resetting adapter\n"); atl1_reset(adapter); } return ret_val; diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c index 69482e0d849b..ef886bdeac13 100644 --- a/drivers/net/atl1/atl1_hw.c +++ b/drivers/net/atl1/atl1_hw.c @@ -2,20 +2,20 @@ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. * Copyright(c) 2006 Chris Snook <csnook@redhat.com> * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com> - * + * * Derived from Intel e1000 driver * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. - * + * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * + * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. @@ -38,12 +38,13 @@ */ s32 atl1_reset_hw(struct atl1_hw *hw) { + struct pci_dev *pdev = hw->back->pdev; u32 icr; int i; - /* + /* * Clear Interrupt mask to stop board from generating - * interrupts & Clear any pending interrupt events + * interrupts & Clear any pending interrupt events */ /* * iowrite32(0, hw->hw_addr + REG_IMR); @@ -74,7 +75,7 @@ s32 atl1_reset_hw(struct atl1_hw *hw) } if (icr) { - printk (KERN_DEBUG "icr = %x\n", icr); + dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); return icr; } @@ -136,8 +137,8 @@ s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) int i; val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | - MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << - MDIO_CLK_SEL_SHIFT; + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << + MDIO_CLK_SEL_SHIFT; iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); ioread32(hw->hw_addr + REG_MDIO_CTRL); @@ -204,7 +205,7 @@ static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) /* * get_permanent_address - * return 0 if get valid mac address, + * return 0 if get valid mac address, */ static int atl1_get_permanent_address(struct atl1_hw *hw) { @@ -301,7 +302,7 @@ static int atl1_get_permanent_address(struct atl1_hw *hw) } /* - * Reads the adapter's MAC address from the EEPROM + * Reads the adapter's MAC address from the EEPROM * hw - Struct containing variables accessed by shared code */ s32 atl1_read_mac_addr(struct atl1_hw *hw) @@ -437,6 +438,7 @@ s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) */ static s32 atl1_phy_reset(struct atl1_hw *hw) { + struct pci_dev *pdev = hw->back->pdev; s32 ret_val; u16 phy_data; @@ -468,8 +470,7 @@ static s32 atl1_phy_reset(struct atl1_hw *hw) u32 val; int i; /* pcie serdes link may be down! */ - printk(KERN_DEBUG "%s: autoneg caused pcie phy link down\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "pcie phy link down\n"); for (i = 0; i < 25; i++) { msleep(1); @@ -479,9 +480,7 @@ static s32 atl1_phy_reset(struct atl1_hw *hw) } if ((val & (MDIO_START | MDIO_BUSY)) != 0) { - printk(KERN_WARNING - "%s: pcie link down at least for 25ms\n", - atl1_driver_name); + dev_warn(&pdev->dev, "pcie link down at least 25ms\n"); return ret_val; } } @@ -571,6 +570,7 @@ s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) */ static s32 atl1_setup_link(struct atl1_hw *hw) { + struct pci_dev *pdev = hw->back->pdev; s32 ret_val; /* @@ -581,15 +581,13 @@ static s32 atl1_setup_link(struct atl1_hw *hw) */ ret_val = atl1_phy_setup_autoneg_adv(hw); if (ret_val) { - printk(KERN_DEBUG "%s: error setting up autonegotiation\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "error setting up autonegotiation\n"); return ret_val; } /* SW.Reset , En-Auto-Neg if needed */ ret_val = atl1_phy_reset(hw); if (ret_val) { - printk(KERN_DEBUG "%s: error resetting the phy\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "error resetting phy\n"); return ret_val; } hw->phy_configured = true; @@ -631,7 +629,7 @@ static void atl1_init_flash_opcode(struct atl1_hw *hw) * Performs basic configuration of the adapter. * hw - Struct containing variables accessed by shared code * Assumes that the controller has previously been reset and is in a - * post-reset uninitialized state. Initializes multicast table, + * post-reset uninitialized state. Initializes multicast table, * and Calls routines to setup link * Leaves the transmit and receive units disabled and uninitialized. */ @@ -669,6 +667,7 @@ s32 atl1_init_hw(struct atl1_hw *hw) */ s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) { + struct pci_dev *pdev = hw->back->pdev; s32 ret_val; u16 phy_data; @@ -691,8 +690,7 @@ s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) *speed = SPEED_10; break; default: - printk(KERN_DEBUG "%s: error getting speed\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "error getting speed\n"); return ATL1_ERR_PHY_SPEED; break; } diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c index 4b1d4d153ecf..d28f88bbdd5f 100644 --- a/drivers/net/atl1/atl1_main.c +++ b/drivers/net/atl1/atl1_main.c @@ -188,8 +188,7 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count); tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL); if (unlikely(!tpd_ring->buffer_info)) { - printk(KERN_WARNING "%s: kzalloc failed , size = D%d\n", - atl1_driver_name, size); + dev_err(&pdev->dev, "kzalloc failed , size = D%d\n", size); goto err_nomem; } rfd_ring->buffer_info = @@ -207,9 +206,7 @@ s32 atl1_setup_ring_resources(struct atl1_adapter *adapter) ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, &ring_header->dma); if (unlikely(!ring_header->desc)) { - printk(KERN_WARNING - "%s: pci_alloc_consistent failed, size = D%d\n", - atl1_driver_name, size); + dev_err(&pdev->dev, "pci_alloc_consistent failed\n"); goto err_nomem; } @@ -373,8 +370,7 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC | ERR_FLAG_CODE | ERR_FLAG_OV)) { adapter->hw_csum_err++; - printk(KERN_DEBUG "%s: rx checksum error\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "rx checksum error\n"); return; } } @@ -393,8 +389,9 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, } /* IPv4, but hardware thinks its checksum is wrong */ - printk(KERN_DEBUG "%s: hw csum wrong pkt_flag:%x, err_flag:%x\n", - atl1_driver_name, rrd->pkt_flg, rrd->err_flg); + dev_dbg(&adapter->pdev->dev, + "hw csum wrong, pkt_flag:%x, err_flag:%x\n", + rrd->pkt_flg, rrd->err_flg); skb->ip_summed = CHECKSUM_COMPLETE; skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); adapter->hw_csum_err++; @@ -507,14 +504,13 @@ chk_rrd: /* rrd seems to be bad */ if (unlikely(i-- > 0)) { /* rrd may not be DMAed completely */ - printk(KERN_DEBUG - "%s: RRD may not be DMAed completely\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, + "incomplete RRD DMA transfer\n"); udelay(1); goto chk_rrd; } /* bad rrd */ - printk(KERN_DEBUG "%s: bad RRD\n", atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "bad RRD\n"); /* see if update RFD index */ if (rrd->num_buf > 1) { u16 num_buf; @@ -685,8 +681,8 @@ static void atl1_check_for_link(struct atl1_adapter *adapter) /* notify upper layer link down ASAP */ if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */ if (netif_carrier_ok(netdev)) { /* old link state: Up */ - printk(KERN_INFO "%s: %s link is down\n", - atl1_driver_name, netdev->name); + dev_info(&adapter->pdev->dev, "%s link is down\n", + netdev->name); adapter->link_speed = SPEED_0; netif_carrier_off(netdev); netif_stop_queue(netdev); @@ -731,8 +727,8 @@ static irqreturn_t atl1_intr(int irq, void *data) /* check if PCIE PHY Link down */ if (status & ISR_PHY_LINKDOWN) { - printk(KERN_DEBUG "%s: pcie phy link down %x\n", - atl1_driver_name, status); + dev_dbg(&adapter->pdev->dev, "pcie phy link down %x\n", + status); if (netif_running(adapter->netdev)) { /* reset MAC */ iowrite32(0, adapter->hw.hw_addr + REG_IMR); schedule_work(&adapter->pcie_dma_to_rst_task); @@ -742,9 +738,9 @@ static irqreturn_t atl1_intr(int irq, void *data) /* check if DMA read/write error ? */ if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) { - printk(KERN_DEBUG - "%s: pcie DMA r/w error (status = 0x%x)\n", - atl1_driver_name, status); + dev_dbg(&adapter->pdev->dev, + "pcie DMA r/w error (status = 0x%x)\n", + status); iowrite32(0, adapter->hw.hw_addr + REG_IMR); schedule_work(&adapter->pcie_dma_to_rst_task); return IRQ_HANDLED; @@ -762,14 +758,13 @@ static irqreturn_t atl1_intr(int irq, void *data) /* rx exception */ if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN | + ISR_RRD_OV | ISR_HOST_RFD_UNRUN | + ISR_HOST_RRD_OV | ISR_CMB_RX))) { + if (status & (ISR_RXF_OV | ISR_RFD_UNRUN | ISR_RRD_OV | ISR_HOST_RFD_UNRUN | - ISR_HOST_RRD_OV | ISR_CMB_RX))) { - if (status & - (ISR_RXF_OV | ISR_RFD_UNRUN | ISR_RRD_OV | - ISR_HOST_RFD_UNRUN | ISR_HOST_RRD_OV)) - printk(KERN_INFO - "%s: rx exception: status = 0x%x\n", - atl1_driver_name, status); + ISR_HOST_RRD_OV)) + dev_dbg(&adapter->pdev->dev, + "rx exception, ISR = 0x%x\n", status); atl1_intr_rx(adapter); } @@ -874,8 +869,7 @@ static u32 atl1_check_link(struct atl1_adapter *adapter) atl1_read_phy_reg(hw, MII_BMSR, &phy_data); if (!(phy_data & BMSR_LSTATUS)) { /* link down */ if (netif_carrier_ok(netdev)) { /* old link state: Up */ - printk(KERN_INFO "%s: link is down\n", - atl1_driver_name); + dev_info(&adapter->pdev->dev, "link is down\n"); adapter->link_speed = SPEED_0; netif_carrier_off(netdev); netif_stop_queue(netdev); @@ -918,11 +912,11 @@ static u32 atl1_check_link(struct atl1_adapter *adapter) adapter->link_speed = speed; adapter->link_duplex = duplex; atl1_setup_mac_ctrl(adapter); - printk(KERN_INFO "%s: %s link is up %d Mbps %s\n", - atl1_driver_name, netdev->name, - adapter->link_speed, - adapter->link_duplex == - FULL_DUPLEX ? "full duplex" : "half duplex"); + dev_info(&adapter->pdev->dev, + "%s link is up %d Mbps %s\n", + netdev->name, adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "full duplex" : "half duplex"); } if (!netif_carrier_ok(netdev)) { /* Link down -> Up */ netif_carrier_on(netdev); @@ -1330,8 +1324,8 @@ static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb, cso = skb_transport_offset(skb); css = cso + skb->csum_offset; if (unlikely(cso & 0x1)) { - printk(KERN_DEBUG "%s: payload offset != even number\n", - atl1_driver_name); + dev_dbg(&adapter->pdev->dev, + "payload offset not an even number\n"); return -1; } csum->csumpl |= (cso & CSUM_PARAM_PLOADOFFSET_MASK) << @@ -1579,7 +1573,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (!spin_trylock(&adapter->lock)) { /* Can't get lock - tell upper layer to requeue */ local_irq_restore(flags); - printk(KERN_DEBUG "%s: TX locked\n", atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "tx locked\n"); return NETDEV_TX_LOCKED; } @@ -1587,7 +1581,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* not enough descriptors */ netif_stop_queue(netdev); spin_unlock_irqrestore(&adapter->lock, flags); - printk(KERN_DEBUG "%s: TX busy\n", atl1_driver_name); + dev_dbg(&adapter->pdev->dev, "tx busy\n"); return NETDEV_TX_BUSY; } @@ -1841,8 +1835,7 @@ static int atl1_change_mtu(struct net_device *netdev, int new_mtu) if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - printk(KERN_WARNING "%s: invalid MTU setting\n", - atl1_driver_name); + dev_warn(&adapter->pdev->dev, "invalid MTU setting\n"); return -EINVAL; } @@ -2136,9 +2129,7 @@ static int __devinit atl1_probe(struct pci_dev *pdev, if (err) { err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { - printk(KERN_DEBUG - "%s: no usable DMA configuration, aborting\n", - atl1_driver_name); + dev_err(&pdev->dev, "no usable DMA configuration\n"); goto err_dma; } pci_using_64 = false; @@ -2175,7 +2166,9 @@ static int __devinit atl1_probe(struct pci_dev *pdev, goto err_pci_iomap; } /* get device revision number */ - adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + (REG_MASTER_CTRL + 2)); + adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr + + (REG_MASTER_CTRL + 2)); + dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); /* set default ring resource counts */ adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD; @@ -2466,8 +2459,6 @@ static void __exit atl1_exit_module(void) */ static int __init atl1_init_module(void) { - printk(KERN_INFO "%s - version %s\n", atl1_driver_string, DRIVER_VERSION); - printk(KERN_INFO "%s\n", atl1_copyright); return pci_register_driver(&atl1_driver); } diff --git a/drivers/net/atl1/atl1_param.c b/drivers/net/atl1/atl1_param.c index bcd0bd891722..4246bb9bd50e 100644 --- a/drivers/net/atl1/atl1_param.c +++ b/drivers/net/atl1/atl1_param.c @@ -23,6 +23,7 @@ #include <linux/types.h> #include <linux/moduleparam.h> +#include <linux/pci.h> #include "atl1.h" /* @@ -93,7 +94,7 @@ struct atl1_option { } arg; }; -static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) +static int __devinit atl1_validate_option(int *value, struct atl1_option *opt, struct pci_dev *pdev) { if (*value == OPTION_UNSET) { *value = opt->def; @@ -104,19 +105,17 @@ static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) case enable_option: switch (*value) { case OPTION_ENABLED: - printk(KERN_INFO "%s: %s Enabled\n", atl1_driver_name, - opt->name); + dev_info(&pdev->dev, "%s enabled\n", opt->name); return 0; case OPTION_DISABLED: - printk(KERN_INFO "%s: %s Disabled\n", atl1_driver_name, - opt->name); + dev_info(&pdev->dev, "%s disabled\n", opt->name); return 0; } break; case range_option: if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - printk(KERN_INFO "%s: %s set to %i\n", - atl1_driver_name, opt->name, *value); + dev_info(&pdev->dev, "%s set to %i\n", opt->name, + *value); return 0; } break; @@ -128,8 +127,8 @@ static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) ent = &opt->arg.l.p[i]; if (*value == ent->i) { if (ent->str[0] != '\0') - printk(KERN_INFO "%s: %s\n", - atl1_driver_name, ent->str); + dev_info(&pdev->dev, "%s\n", + ent->str); return 0; } } @@ -140,8 +139,8 @@ static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) break; } - printk(KERN_INFO "%s: invalid %s specified (%i) %s\n", - atl1_driver_name, opt->name, *value, opt->err); + dev_info(&pdev->dev, "invalid %s specified (%i) %s\n", + opt->name, *value, opt->err); *value = opt->def; return -1; } @@ -157,12 +156,11 @@ static int __devinit atl1_validate_option(int *value, struct atl1_option *opt) */ void __devinit atl1_check_options(struct atl1_adapter *adapter) { + struct pci_dev *pdev = adapter->pdev; int bd = adapter->bd_number; if (bd >= ATL1_MAX_NIC) { - printk(KERN_NOTICE "%s: warning: no configuration for board #%i\n", - atl1_driver_name, bd); - printk(KERN_NOTICE "%s: using defaults for all values\n", - atl1_driver_name); + dev_notice(&pdev->dev, "no configuration for board#%i\n", bd); + dev_notice(&pdev->dev, "using defaults for all values\n"); } { /* Interrupt Moderate Timer */ struct atl1_option opt = { @@ -177,7 +175,7 @@ void __devinit atl1_check_options(struct atl1_adapter *adapter) int val; if (num_int_mod_timer > bd) { val = int_mod_timer[bd]; - atl1_validate_option(&val, &opt); + atl1_validate_option(&val, &opt, pdev); adapter->imt = (u16) val; } else adapter->imt = (u16) (opt.def); @@ -197,7 +195,7 @@ void __devinit atl1_check_options(struct atl1_adapter *adapter) int val; if (num_flash_vendor > bd) { val = flash_vendor[bd]; - atl1_validate_option(&val, &opt); + atl1_validate_option(&val, &opt, pdev); adapter->hw.flash_vendor = (u8) val; } else adapter->hw.flash_vendor = (u8) (opt.def); diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 4612725965df..9b8d7d9dbe86 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -1260,9 +1260,10 @@ static int __devinit bmac_probe(struct macio_dev *mdev, const struct of_device_i printk(KERN_ERR "BMAC: can't use, need 3 addrs and 3 intrs\n"); return -ENODEV; } - prop_addr = get_property(macio_get_of_node(mdev), "mac-address", NULL); + prop_addr = of_get_property(macio_get_of_node(mdev), + "mac-address", NULL); if (prop_addr == NULL) { - prop_addr = get_property(macio_get_of_node(mdev), + prop_addr = of_get_property(macio_get_of_node(mdev), "local-mac-address", NULL); if (prop_addr == NULL) { printk(KERN_ERR "BMAC: Can't get mac-address\n"); diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 8cc1174e7f64..264fa0e2e075 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -77,9 +77,6 @@ #define DM9000_PHY 0x40 /* PHY address 0x01 */ -#define TRUE 1 -#define FALSE 0 - #define CARDNAME "dm9000" #define PFX CARDNAME ": " @@ -601,7 +598,7 @@ dm9000_probe(struct platform_device *pdev) printk("%s: not found (%d).\n", CARDNAME, ret); dm9000_release_board(pdev, db); - kfree(ndev); + free_netdev(ndev); return ret; } @@ -896,7 +893,7 @@ dm9000_rx(struct net_device *dev) struct dm9000_rxhdr rxhdr; struct sk_buff *skb; u8 rxbyte, *rdptr; - int GoodPacket; + bool GoodPacket; int RxLen; /* Check packet ready or not */ @@ -918,7 +915,7 @@ dm9000_rx(struct net_device *dev) return; /* A packet ready now & Get status/length */ - GoodPacket = TRUE; + GoodPacket = true; writeb(DM9000_MRCMD, db->io_addr); (db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr)); @@ -927,7 +924,7 @@ dm9000_rx(struct net_device *dev) /* Packet Status check */ if (RxLen < 0x40) { - GoodPacket = FALSE; + GoodPacket = false; PRINTK1("Bad Packet received (runt)\n"); } @@ -936,7 +933,7 @@ dm9000_rx(struct net_device *dev) } if (rxhdr.RxStatus & 0xbf00) { - GoodPacket = FALSE; + GoodPacket = false; if (rxhdr.RxStatus & 0x100) { PRINTK1("fifo error\n"); db->stats.rx_fifo_errors++; @@ -1193,7 +1190,7 @@ dm9000_drv_remove(struct platform_device *pdev) unregister_netdev(ndev); dm9000_release_board(pdev, (board_info_t *) ndev->priv); - kfree(ndev); /* free device structure */ + free_netdev(ndev); /* free device structure */ PRINTK1("clean_module() exit\n"); diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index c7a5614e66c0..f6e0cb1ada1f 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -1803,10 +1803,10 @@ static inline int ehea_hash_skb(struct sk_buff *skb, int num_qps) u32 tmp; if ((skb->protocol == htons(ETH_P_IP)) && - (skb->nh.iph->protocol == IPPROTO_TCP)) { - tcp = (struct tcphdr*)(skb->nh.raw + (skb->nh.iph->ihl * 4)); + (ip_hdr(skb)->protocol == IPPROTO_TCP)) { + tcp = (struct tcphdr*)(skb_network_header(skb) + (ip_hdr(skb)->ihl * 4)); tmp = (tcp->source + (tcp->dest << 16)) % 31; - tmp += skb->nh.iph->daddr % 31; + tmp += ip_hdr(skb)->daddr % 31; return tmp % num_qps; } else @@ -2603,14 +2603,13 @@ static int ehea_setup_ports(struct ehea_adapter *adapter) { struct device_node *lhea_dn; struct device_node *eth_dn = NULL; - - u32 *dn_log_port_id; + const u32 *dn_log_port_id; int i = 0; lhea_dn = adapter->ebus_dev->ofdev.node; while ((eth_dn = of_get_next_child(lhea_dn, eth_dn))) { - dn_log_port_id = (u32*)get_property(eth_dn, "ibm,hea-port-no", + dn_log_port_id = of_get_property(eth_dn, "ibm,hea-port-no", NULL); if (!dn_log_port_id) { ehea_error("bad device node: eth_dn name=%s", @@ -2645,12 +2644,12 @@ static struct device_node *ehea_get_eth_dn(struct ehea_adapter *adapter, { struct device_node *lhea_dn; struct device_node *eth_dn = NULL; - u32 *dn_log_port_id; + const u32 *dn_log_port_id; lhea_dn = adapter->ebus_dev->ofdev.node; while ((eth_dn = of_get_next_child(lhea_dn, eth_dn))) { - dn_log_port_id = (u32*)get_property(eth_dn, "ibm,hea-port-no", + dn_log_port_id = of_get_property(eth_dn, "ibm,hea-port-no", NULL); if (dn_log_port_id) if (*dn_log_port_id == logical_port_id) @@ -2774,7 +2773,7 @@ static int __devinit ehea_probe_adapter(struct ibmebus_dev *dev, const struct of_device_id *id) { struct ehea_adapter *adapter; - u64 *adapter_handle; + const u64 *adapter_handle; int ret; if (!dev || !dev->ofdev.node) { @@ -2791,7 +2790,7 @@ static int __devinit ehea_probe_adapter(struct ibmebus_dev *dev, adapter->ebus_dev = dev; - adapter_handle = (u64*)get_property(dev->ofdev.node, "ibm,hea-handle", + adapter_handle = of_get_property(dev->ofdev.node, "ibm,hea-handle", NULL); if (adapter_handle) adapter->handle = *adapter_handle; diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c index 17b0c3ab6201..9d6c8f391b2d 100644 --- a/drivers/net/irda/sir_dev.c +++ b/drivers/net/irda/sir_dev.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <net/irda/irda.h> diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c index d7e32d9554fc..25d5b8a96bdc 100644 --- a/drivers/net/irda/sir_dongle.c +++ b/drivers/net/irda/sir_dongle.c @@ -14,7 +14,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/kmod.h> #include <linux/mutex.h> diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 198bf3bfa70f..9043bf4aa49e 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -79,11 +79,17 @@ MODULE_AUTHOR("Daniele Peri <peri@csai.unipa.it>"); MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver"); MODULE_LICENSE("GPL"); -static int ircc_dma = 255; +static int smsc_nopnp; +module_param_named(nopnp, smsc_nopnp, bool, 0); +MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings"); + +#define DMA_INVAL 255 +static int ircc_dma = DMA_INVAL; module_param(ircc_dma, int, 0); MODULE_PARM_DESC(ircc_dma, "DMA channel"); -static int ircc_irq = 255; +#define IRQ_INVAL 255 +static int ircc_irq = IRQ_INVAL; module_param(ircc_irq, int, 0); MODULE_PARM_DESC(ircc_irq, "IRQ line"); @@ -360,7 +366,6 @@ static inline void register_bank(int iobase, int bank) iobase + IRCC_MASTER); } -#ifdef CONFIG_PNP /* PNP hotplug support */ static const struct pnp_device_id smsc_ircc_pnp_table[] = { { .id = "SMCf010", .driver_data = 0 }, @@ -368,7 +373,35 @@ static const struct pnp_device_id smsc_ircc_pnp_table[] = { { } }; MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table); -#endif + +static int pnp_driver_registered; + +static int __init smsc_ircc_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) +{ + unsigned int firbase, sirbase; + u8 dma, irq; + + if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && + pnp_dma_valid(dev, 0) && pnp_irq_valid(dev, 0))) + return -EINVAL; + + sirbase = pnp_port_start(dev, 0); + firbase = pnp_port_start(dev, 1); + dma = pnp_dma(dev, 0); + irq = pnp_irq(dev, 0); + + if (smsc_ircc_open(firbase, sirbase, dma, irq)) + return -ENODEV; + + return 0; +} + +static struct pnp_driver smsc_ircc_pnp_driver = { + .name = "smsc-ircc2", + .id_table = smsc_ircc_pnp_table, + .probe = smsc_ircc_pnp_probe, +}; /******************************************************************************* @@ -379,6 +412,35 @@ MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table); * *******************************************************************************/ +static int __init smsc_ircc_legacy_probe(void) +{ + int ret = 0; + + if (ircc_fir > 0 && ircc_sir > 0) { + IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir); + IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir); + + if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq)) + ret = -ENODEV; + } else { + ret = -ENODEV; + + /* try user provided configuration register base address */ + if (ircc_cfg > 0) { + IRDA_MESSAGE(" Overriding configuration address " + "0x%04x\n", ircc_cfg); + if (!smsc_superio_fdc(ircc_cfg)) + ret = 0; + if (!smsc_superio_lpc(ircc_cfg)) + ret = 0; + } + + if (smsc_ircc_look_for_chips() > 0) + ret = 0; + } + return ret; +} + /* * Function smsc_ircc_init () * @@ -406,31 +468,20 @@ static int __init smsc_ircc_init(void) dev_count = 0; - if (ircc_fir > 0 && ircc_sir > 0) { - IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir); - IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir); - - if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq)) - ret = -ENODEV; + if (smsc_nopnp || !pnp_platform_devices || + ircc_cfg || ircc_fir || ircc_sir || + ircc_dma != DMA_INVAL || ircc_irq != IRQ_INVAL) { + ret = smsc_ircc_legacy_probe(); } else { - ret = -ENODEV; - - /* try user provided configuration register base address */ - if (ircc_cfg > 0) { - IRDA_MESSAGE(" Overriding configuration address " - "0x%04x\n", ircc_cfg); - if (!smsc_superio_fdc(ircc_cfg)) - ret = 0; - if (!smsc_superio_lpc(ircc_cfg)) - ret = 0; - } - - if (smsc_ircc_look_for_chips() > 0) - ret = 0; + if (pnp_register_driver(&smsc_ircc_pnp_driver) == 0) + pnp_driver_registered = 1; } - if (ret) + if (ret) { + if (pnp_driver_registered) + pnp_unregister_driver(&smsc_ircc_pnp_driver); platform_driver_unregister(&smsc_ircc_driver); + } return ret; } @@ -646,7 +697,7 @@ static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE; self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED; - if (irq < 255) { + if (irq != IRQ_INVAL) { if (irq != chip_irq) IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n", driver_name, chip_irq, irq); @@ -654,7 +705,7 @@ static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, } else self->io.irq = chip_irq; - if (dma < 255) { + if (dma != DMA_INVAL) { if (dma != chip_dma) IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n", driver_name, chip_dma, dma); @@ -1840,6 +1891,9 @@ static void __exit smsc_ircc_cleanup(void) smsc_ircc_close(dev_self[i]); } + if (pnp_driver_registered) + pnp_unregister_driver(&smsc_ircc_pnp_driver); + platform_driver_unregister(&smsc_ircc_driver); } @@ -2836,9 +2890,9 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg, tmpconf.fir_io = ircc_fir; if (ircc_sir != 0) tmpconf.sir_io = ircc_sir; - if (ircc_dma != 0xff) + if (ircc_dma != DMA_INVAL) tmpconf.fir_dma = ircc_dma; - if (ircc_irq != 0xff) + if (ircc_irq != IRQ_INVAL) tmpconf.fir_irq = ircc_irq; IRDA_MESSAGE("Detected unconfigured %s SMSC IrDA chip, pre-configuring device.\n", conf->name); diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c index c4be973867a6..bf78ef1120ad 100644 --- a/drivers/net/irda/vlsi_ir.c +++ b/drivers/net/irda/vlsi_ir.c @@ -44,7 +44,6 @@ MODULE_LICENSE("GPL"); #include <linux/time.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/smp_lock.h> #include <asm/uaccess.h> #include <asm/byteorder.h> diff --git a/drivers/net/mace.c b/drivers/net/mace.c index b3bd62394958..52b9332810c5 100644 --- a/drivers/net/mace.c +++ b/drivers/net/mace.c @@ -110,9 +110,9 @@ static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_i return -ENODEV; } - addr = get_property(mace, "mac-address", NULL); + addr = of_get_property(mace, "mac-address", NULL); if (addr == NULL) { - addr = get_property(mace, "local-mac-address", NULL); + addr = of_get_property(mace, "local-mac-address", NULL); if (addr == NULL) { printk(KERN_ERR "Can't get mac-address for MACE %s\n", mace->full_name); diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 16e3c4315e82..5d14be7405a3 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -290,6 +290,8 @@ MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n"); #define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8) +static void myri10ge_set_multicast_list(struct net_device *dev); + static inline void put_be32(__be32 val, __be32 __iomem * p) { __raw_writel((__force __u32) val, (__force void __iomem *)p); @@ -353,6 +355,8 @@ myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd, return 0; } else if (result == MXGEFW_CMD_UNKNOWN) { return -ENOSYS; + } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) { + return -E2BIG; } else { dev_err(&mgp->pdev->dev, "command %d failed, result = %d\n", @@ -712,14 +716,78 @@ myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic) mgp->dev->name); } -static int myri10ge_reset(struct myri10ge_priv *mgp) +static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type) { struct myri10ge_cmd cmd; int status; - size_t bytes; u32 len; struct page *dmatest_page; dma_addr_t dmatest_bus; + char *test = " "; + + dmatest_page = alloc_page(GFP_KERNEL); + if (!dmatest_page) + return -ENOMEM; + dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE, + DMA_BIDIRECTIONAL); + + /* Run a small DMA test. + * The magic multipliers to the length tell the firmware + * to do DMA read, write, or read+write tests. The + * results are returned in cmd.data0. The upper 16 + * bits or the return is the number of transfers completed. + * The lower 16 bits is the time in 0.5us ticks that the + * transfers took to complete. + */ + + len = mgp->tx.boundary; + + cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); + cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); + cmd.data2 = len * 0x10000; + status = myri10ge_send_cmd(mgp, test_type, &cmd, 0); + if (status != 0) { + test = "read"; + goto abort; + } + mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff); + cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); + cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); + cmd.data2 = len * 0x1; + status = myri10ge_send_cmd(mgp, test_type, &cmd, 0); + if (status != 0) { + test = "write"; + goto abort; + } + mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff); + + cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); + cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); + cmd.data2 = len * 0x10001; + status = myri10ge_send_cmd(mgp, test_type, &cmd, 0); + if (status != 0) { + test = "read/write"; + goto abort; + } + mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) / + (cmd.data0 & 0xffff); + +abort: + pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL); + put_page(dmatest_page); + + if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST) + dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n", + test, status); + + return status; +} + +static int myri10ge_reset(struct myri10ge_priv *mgp) +{ + struct myri10ge_cmd cmd; + int status; + size_t bytes; /* try to send a reset command to the card to see if it * is alive */ @@ -729,11 +797,8 @@ static int myri10ge_reset(struct myri10ge_priv *mgp) dev_err(&mgp->pdev->dev, "failed reset\n"); return -ENXIO; } - dmatest_page = alloc_page(GFP_KERNEL); - if (!dmatest_page) - return -ENOMEM; - dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE, - DMA_BIDIRECTIONAL); + + (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST); /* Now exchange information about interrupts */ @@ -761,52 +826,6 @@ static int myri10ge_reset(struct myri10ge_priv *mgp) } put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr); - /* Run a small DMA test. - * The magic multipliers to the length tell the firmware - * to do DMA read, write, or read+write tests. The - * results are returned in cmd.data0. The upper 16 - * bits or the return is the number of transfers completed. - * The lower 16 bits is the time in 0.5us ticks that the - * transfers took to complete. - */ - - len = mgp->tx.boundary; - - cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); - cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); - cmd.data2 = len * 0x10000; - status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0); - if (status == 0) - mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / - (cmd.data0 & 0xffff); - else - dev_warn(&mgp->pdev->dev, "DMA read benchmark failed: %d\n", - status); - cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); - cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); - cmd.data2 = len * 0x1; - status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0); - if (status == 0) - mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / - (cmd.data0 & 0xffff); - else - dev_warn(&mgp->pdev->dev, "DMA write benchmark failed: %d\n", - status); - - cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus); - cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus); - cmd.data2 = len * 0x10001; - status = myri10ge_send_cmd(mgp, MXGEFW_DMA_TEST, &cmd, 0); - if (status == 0) - mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) / - (cmd.data0 & 0xffff); - else - dev_warn(&mgp->pdev->dev, - "DMA read/write benchmark failed: %d\n", status); - - pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL); - put_page(dmatest_page); - memset(mgp->rx_done.entry, 0, bytes); /* reset mcp/driver shared state back to 0 */ @@ -820,10 +839,8 @@ static int myri10ge_reset(struct myri10ge_priv *mgp) mgp->rx_done.cnt = 0; mgp->link_changes = 0; status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr); - myri10ge_change_promisc(mgp, 0, 0); myri10ge_change_pause(mgp, mgp->pause); - if (mgp->adopted_rx_filter_bug) - (void)myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1); + myri10ge_set_multicast_list(mgp->dev); return status; } @@ -1355,7 +1372,9 @@ static const char myri10ge_gstrings_stats[][ETH_GSTRING_LEN] = { "tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt", "wake_queue", "stop_queue", "watchdog_resets", "tx_linearized", "link_changes", "link_up", "dropped_link_overflow", - "dropped_link_error_or_filtered", "dropped_multicast_filtered", + "dropped_link_error_or_filtered", + "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32", + "dropped_unicast_filtered", "dropped_multicast_filtered", "dropped_runt", "dropped_overrun", "dropped_no_small_buffer", "dropped_no_big_buffer" }; @@ -1412,6 +1431,11 @@ myri10ge_get_ethtool_stats(struct net_device *netdev, data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_overflow); data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_error_or_filtered); + data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_pause); + data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_bad_phy); + data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_bad_crc32); + data[i++] = + (unsigned int)ntohl(mgp->fw_stats->dropped_unicast_filtered); data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_multicast_filtered); data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_runt); @@ -2276,7 +2300,7 @@ static void myri10ge_set_multicast_list(struct net_device *dev) myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1); /* This firmware is known to not support multicast */ - if (!mgp->fw_multicast_support || mgp->adopted_rx_filter_bug) + if (!mgp->fw_multicast_support) return; /* Disable multicast filtering */ @@ -2288,7 +2312,7 @@ static void myri10ge_set_multicast_list(struct net_device *dev) goto abort; } - if (dev->flags & IFF_ALLMULTI) { + if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) { /* request to disable multicast filtering, so quit here */ return; } @@ -2461,8 +2485,6 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp) err_cap |= PCI_ERR_CAP_ECRC_GENE; pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap); dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge)); - mgp->tx.boundary = 4096; - mgp->fw_name = myri10ge_fw_aligned; } /* @@ -2484,22 +2506,70 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp) * firmware image, and set tx.boundary to 4KB. */ -#define PCI_DEVICE_ID_INTEL_E5000_PCIE23 0x25f7 -#define PCI_DEVICE_ID_INTEL_E5000_PCIE47 0x25fa -#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1 0x3510 -#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4 0x351b -#define PCI_DEVICE_ID_INTEL_E3000_PCIE 0x2779 -#define PCI_DEVICE_ID_INTEL_E3010_PCIE 0x277a -#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST 0x140 -#define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST 0x142 - -static void myri10ge_select_firmware(struct myri10ge_priv *mgp) +static void myri10ge_firmware_probe(struct myri10ge_priv *mgp) { - struct pci_dev *bridge = mgp->pdev->bus->self; + struct pci_dev *pdev = mgp->pdev; + struct device *dev = &pdev->dev; + int cap, status; + u16 val; + + mgp->tx.boundary = 4096; + /* + * Verify the max read request size was set to 4KB + * before trying the test with 4KB. + */ + cap = pci_find_capability(pdev, PCI_CAP_ID_EXP); + if (cap < 64) { + dev_err(dev, "Bad PCI_CAP_ID_EXP location %d\n", cap); + goto abort; + } + status = pci_read_config_word(pdev, cap + PCI_EXP_DEVCTL, &val); + if (status != 0) { + dev_err(dev, "Couldn't read max read req size: %d\n", status); + goto abort; + } + if ((val & (5 << 12)) != (5 << 12)) { + dev_warn(dev, "Max Read Request size != 4096 (0x%x)\n", val); + mgp->tx.boundary = 2048; + } + /* + * load the optimized firmware (which assumes aligned PCIe + * completions) in order to see if it works on this host. + */ + mgp->fw_name = myri10ge_fw_aligned; + status = myri10ge_load_firmware(mgp); + if (status != 0) { + goto abort; + } + + /* + * Enable ECRC if possible + */ + myri10ge_enable_ecrc(mgp); + + /* + * Run a DMA test which watches for unaligned completions and + * aborts on the first one seen. + */ + status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST); + if (status == 0) + return; /* keep the aligned firmware */ + + if (status != -E2BIG) + dev_warn(dev, "DMA test failed: %d\n", status); + if (status == -ENOSYS) + dev_warn(dev, "Falling back to ethp! " + "Please install up to date fw\n"); +abort: + /* fall back to using the unaligned firmware */ mgp->tx.boundary = 2048; mgp->fw_name = myri10ge_fw_unaligned; +} + +static void myri10ge_select_firmware(struct myri10ge_priv *mgp) +{ if (myri10ge_force_firmware == 0) { int link_width, exp_cap; u16 lnk; @@ -2508,8 +2578,6 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp) pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk); link_width = (lnk >> 4) & 0x3f; - myri10ge_enable_ecrc(mgp); - /* Check to see if Link is less than 8 or if the * upstream bridge is known to provide aligned * completions */ @@ -2518,46 +2586,8 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp) link_width); mgp->tx.boundary = 4096; mgp->fw_name = myri10ge_fw_aligned; - } else if (bridge && - /* ServerWorks HT2000/HT1000 */ - ((bridge->vendor == PCI_VENDOR_ID_SERVERWORKS - && bridge->device == - PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE) - /* ServerWorks HT2100 */ - || (bridge->vendor == PCI_VENDOR_ID_SERVERWORKS - && bridge->device >= - PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST - && bridge->device <= - PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST) - /* All Intel E3000/E3010 PCIE ports */ - || (bridge->vendor == PCI_VENDOR_ID_INTEL - && (bridge->device == - PCI_DEVICE_ID_INTEL_E3000_PCIE - || bridge->device == - PCI_DEVICE_ID_INTEL_E3010_PCIE)) - /* All Intel 6310/6311/6321ESB PCIE ports */ - || (bridge->vendor == PCI_VENDOR_ID_INTEL - && bridge->device >= - PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1 - && bridge->device <= - PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4) - /* All Intel E5000 PCIE ports */ - || (bridge->vendor == PCI_VENDOR_ID_INTEL - && bridge->device >= - PCI_DEVICE_ID_INTEL_E5000_PCIE23 - && bridge->device <= - PCI_DEVICE_ID_INTEL_E5000_PCIE47))) { - dev_info(&mgp->pdev->dev, - "Assuming aligned completions (0x%x:0x%x)\n", - bridge->vendor, bridge->device); - mgp->tx.boundary = 4096; - mgp->fw_name = myri10ge_fw_aligned; - } else if (bridge && - bridge->vendor == PCI_VENDOR_ID_SGI && - bridge->device == 0x4002 /* TIOCE pcie-port */ ) { - /* this pcie bridge does not support 4K rdma request */ - mgp->tx.boundary = 2048; - mgp->fw_name = myri10ge_fw_aligned; + } else { + myri10ge_firmware_probe(mgp); } } else { if (myri10ge_force_firmware == 1) { @@ -2825,7 +2855,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) status = -ENODEV; goto abort_with_netdev; } - myri10ge_select_firmware(mgp); /* Find the vendor-specific cap so we can check * the reboot register later on */ @@ -2919,6 +2948,8 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto abort_with_ioremap; memset(mgp->rx_done.entry, 0, bytes); + myri10ge_select_firmware(mgp); + status = myri10ge_load_firmware(mgp); if (status != 0) { dev_err(&pdev->dev, "failed to load firmware\n"); diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h index 29463b301a84..a1d2a22296a9 100644 --- a/drivers/net/myri10ge/myri10ge_mcp.h +++ b/drivers/net/myri10ge/myri10ge_mcp.h @@ -200,6 +200,13 @@ enum myri10ge_mcp_cmd_type { /* data0, data1 = bus addr, * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows * adding new stuff to mcp_irq_data without changing the ABI */ + + MXGEFW_CMD_UNALIGNED_TEST, + /* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned + * chipset */ + + MXGEFW_CMD_UNALIGNED_STATUS + /* return data = boolean, true if the chipset is known to be unaligned */ }; enum myri10ge_mcp_cmd_status { @@ -212,18 +219,27 @@ enum myri10ge_mcp_cmd_status { MXGEFW_CMD_ERROR_HASH_ERROR, MXGEFW_CMD_ERROR_BAD_PORT, MXGEFW_CMD_ERROR_RESOURCES, - MXGEFW_CMD_ERROR_MULTICAST + MXGEFW_CMD_ERROR_MULTICAST, + MXGEFW_CMD_ERROR_UNALIGNED }; #define MXGEFW_OLD_IRQ_DATA_LEN 40 struct mcp_irq_data { /* add new counters at the beginning */ - __be32 future_use[5]; + __be32 future_use[1]; + __be32 dropped_pause; + __be32 dropped_unicast_filtered; + __be32 dropped_bad_crc32; + __be32 dropped_bad_phy; __be32 dropped_multicast_filtered; /* 40 Bytes */ __be32 send_done_count; +#define MXGEFW_LINK_DOWN 0 +#define MXGEFW_LINK_UP 1 +#define MXGEFW_LINK_MYRINET 2 +#define MXGEFW_LINK_UNKNOWN 3 __be32 link_up; __be32 dropped_link_overflow; __be32 dropped_link_error_or_filtered; diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index a8d7ff2c96ac..223e0e6264ba 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -81,6 +81,8 @@ static const int multicast_filter_limit = 100; Setting to > 1518 effectively disables this feature. */ static int rx_copybreak; +static int dspcfg_workaround = 1; + /* Used to pass the media type, etc. Both 'options[]' and 'full_duplex[]' should exist for driver interoperability. @@ -139,12 +141,14 @@ MODULE_LICENSE("GPL"); module_param(mtu, int, 0); module_param(debug, int, 0); module_param(rx_copybreak, int, 0); +module_param(dspcfg_workaround, int, 1); module_param_array(options, int, NULL, 0); module_param_array(full_duplex, int, NULL, 0); MODULE_PARM_DESC(mtu, "DP8381x MTU (all boards)"); MODULE_PARM_DESC(debug, "DP8381x default debug level"); MODULE_PARM_DESC(rx_copybreak, "DP8381x copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(dspcfg_workaround, "DP8381x: control DspCfg workaround"); MODULE_PARM_DESC(options, "DP8381x: Bits 0-3: media type, bit 17: full duplex"); MODULE_PARM_DESC(full_duplex, "DP8381x full duplex setting(s) (1)"); @@ -590,6 +594,7 @@ struct netdev_private { u32 srr; /* expected DSPCFG value */ u16 dspcfg; + int dspcfg_workaround; /* parms saved in ethtool format */ u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */ u8 duplex; /* Duplex, half or full */ @@ -656,6 +661,56 @@ static int netdev_get_regs(struct net_device *dev, u8 *buf); static int netdev_get_eeprom(struct net_device *dev, u8 *buf); static const struct ethtool_ops ethtool_ops; +#define NATSEMI_ATTR(_name) \ +static ssize_t natsemi_show_##_name(struct device *dev, \ + struct device_attribute *attr, char *buf); \ + static ssize_t natsemi_set_##_name(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t count); \ + static DEVICE_ATTR(_name, 0644, natsemi_show_##_name, natsemi_set_##_name) + +#define NATSEMI_CREATE_FILE(_dev, _name) \ + device_create_file(&_dev->dev, &dev_attr_##_name) +#define NATSEMI_REMOVE_FILE(_dev, _name) \ + device_create_file(&_dev->dev, &dev_attr_##_name) + +NATSEMI_ATTR(dspcfg_workaround); + +static ssize_t natsemi_show_dspcfg_workaround(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct netdev_private *np = netdev_priv(to_net_dev(dev)); + + return sprintf(buf, "%s\n", np->dspcfg_workaround ? "on" : "off"); +} + +static ssize_t natsemi_set_dspcfg_workaround(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct netdev_private *np = netdev_priv(to_net_dev(dev)); + int new_setting; + u32 flags; + + /* Find out the new setting */ + if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1)) + new_setting = 1; + else if (!strncmp("off", buf, count - 1) + || !strncmp("0", buf, count - 1)) + new_setting = 0; + else + return count; + + spin_lock_irqsave(&np->lock, flags); + + np->dspcfg_workaround = new_setting; + + spin_unlock_irqrestore(&np->lock, flags); + + return count; +} + static inline void __iomem *ns_ioaddr(struct net_device *dev) { return (void __iomem *) dev->base_addr; @@ -820,6 +875,7 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, np->ignore_phy = 1; else np->ignore_phy = 0; + np->dspcfg_workaround = dspcfg_workaround; /* Initial port: * - If configured to ignore the PHY set up for external. @@ -899,6 +955,9 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, if (i) goto err_register_netdev; + if (NATSEMI_CREATE_FILE(pdev, dspcfg_workaround)) + goto err_create_file; + if (netif_msg_drv(np)) { printk(KERN_INFO "natsemi %s: %s at %#08lx (%s), ", dev->name, natsemi_pci_info[chip_idx].name, iostart, @@ -915,6 +974,9 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev, } return 0; + err_create_file: + unregister_netdev(dev); + err_register_netdev: iounmap(ioaddr); @@ -1727,7 +1789,8 @@ static void init_registers(struct net_device *dev) * It seems that a reference set for this chip went out with incorrect info, * and there exist boards that aren't quite right. An unexpected voltage * drop can cause the PHY to get itself in a weird state (basically reset). - * NOTE: this only seems to affect revC chips. + * NOTE: this only seems to affect revC chips. The user can disable + * this check via dspcfg_workaround sysfs option. * 3) check of death of the RX path due to OOM */ static void netdev_timer(unsigned long data) @@ -1753,10 +1816,10 @@ static void netdev_timer(unsigned long data) writew(1, ioaddr+PGSEL); dspcfg = readw(ioaddr+DSPCFG); writew(0, ioaddr+PGSEL); - if (dspcfg != np->dspcfg) { + if (np->dspcfg_workaround && dspcfg != np->dspcfg) { if (!netif_queue_stopped(dev)) { spin_unlock_irq(&np->lock); - if (netif_msg_hw(np)) + if (netif_msg_drv(np)) printk(KERN_NOTICE "%s: possible phy reset: " "re-initializing\n", dev->name); disable_irq(dev->irq); @@ -3157,6 +3220,7 @@ static void __devexit natsemi_remove1 (struct pci_dev *pdev) struct net_device *dev = pci_get_drvdata(pdev); void __iomem * ioaddr = ns_ioaddr(dev); + NATSEMI_REMOVE_FILE(pdev, dspcfg_workaround); unregister_netdev (dev); pci_release_regions (pdev); iounmap(ioaddr); diff --git a/drivers/net/ne.c b/drivers/net/ne.c index a5c4199e2754..c9f74bf5f491 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -51,14 +51,11 @@ static const char version2[] = #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/jiffies.h> +#include <linux/platform_device.h> #include <asm/system.h> #include <asm/io.h> -#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938) -#include <asm/tx4938/rbtx4938.h> -#endif - #include "8390.h" #define DRV_NAME "ne" @@ -77,8 +74,13 @@ static const char version2[] = /* Do we have a non std. amount of memory? (in units of 256 byte pages) */ /* #define PACKETBUF_MEMSIZE 0x40 */ +#if !defined(MODULE) && (defined(CONFIG_ISA) || defined(CONFIG_M32R)) +/* Do we need a portlist for the ISA auto-probe ? */ +#define NEEDS_PORTLIST +#endif + /* A zero-terminated list of I/O addresses to be probed at boot. */ -#ifndef MODULE +#ifdef NEEDS_PORTLIST static unsigned int netcard_portlist[] __initdata = { 0x300, 0x280, 0x320, 0x340, 0x360, 0x380, 0 }; @@ -146,7 +148,7 @@ bad_clone_list[] __initdata = { # define DCR_VAL 0x49 #endif -static int ne_probe1(struct net_device *dev, int ioaddr); +static int ne_probe1(struct net_device *dev, unsigned long ioaddr); static int ne_probe_isapnp(struct net_device *dev); static int ne_open(struct net_device *dev); @@ -184,8 +186,8 @@ static void ne_block_output(struct net_device *dev, const int count, static int __init do_ne_probe(struct net_device *dev) { - unsigned int base_addr = dev->base_addr; -#ifndef MODULE + unsigned long base_addr = dev->base_addr; +#ifdef NEEDS_PORTLIST int orig_irq = dev->irq; #endif @@ -201,7 +203,7 @@ static int __init do_ne_probe(struct net_device *dev) if (isapnp_present() && (ne_probe_isapnp(dev) == 0)) return 0; -#ifndef MODULE +#ifdef NEEDS_PORTLIST /* Last resort. The semi-risky ISA auto-probe. */ for (base_addr = 0; netcard_portlist[base_addr] != 0; base_addr++) { int ioaddr = netcard_portlist[base_addr]; @@ -226,10 +228,6 @@ struct net_device * __init ne_probe(int unit) sprintf(dev->name, "eth%d", unit); netdev_boot_setup_check(dev); -#ifdef CONFIG_TOSHIBA_RBTX4938 - dev->base_addr = RBTX4938_RTL_8019_BASE; - dev->irq = RBTX4938_RTL_8019_IRQ; -#endif err = do_ne_probe(dev); if (err) goto out; @@ -285,7 +283,7 @@ static int __init ne_probe_isapnp(struct net_device *dev) return -ENODEV; } -static int __init ne_probe1(struct net_device *dev, int ioaddr) +static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) { int i; unsigned char SA_prom[32]; @@ -324,7 +322,7 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr) if (ei_debug && version_printed++ == 0) printk(KERN_INFO "%s" KERN_INFO "%s", version1, version2); - printk(KERN_INFO "NE*000 ethercard probe at %#3x:", ioaddr); + printk(KERN_INFO "NE*000 ethercard probe at %#3lx:", ioaddr); /* A user with a poor card that fails to ack the reset, or that does not have a valid 0x57,0x57 signature can still use this @@ -516,8 +514,7 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr) } #endif - printk("\n%s: %s found at %#x, using IRQ %d.\n", - dev->name, name, ioaddr, dev->irq); + printk("\n"); ei_status.name = name; ei_status.tx_start_page = start_page; @@ -547,6 +544,8 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr) ret = register_netdev(dev); if (ret) goto out_irq; + printk(KERN_INFO "%s: %s found at %#lx, using IRQ %d.\n", + dev->name, name, ioaddr, dev->irq); return 0; out_irq: @@ -807,6 +806,87 @@ retry: return; } +static int __init ne_drv_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct resource *res; + int err, irq; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + irq = platform_get_irq(pdev, 0); + if (!res || irq < 0) + return -ENODEV; + + dev = alloc_ei_netdev(); + if (!dev) + return -ENOMEM; + dev->irq = irq; + dev->base_addr = res->start; + err = do_ne_probe(dev); + if (err) { + free_netdev(dev); + return err; + } + platform_set_drvdata(pdev, dev); + return 0; +} + +static int __exit ne_drv_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + unregister_netdev(dev); + free_irq(dev->irq, dev); + release_region(dev->base_addr, NE_IO_EXTENT); + free_netdev(dev); + return 0; +} + +#ifdef CONFIG_PM +static int ne_drv_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + if (netif_running(dev)) + netif_device_detach(dev); + return 0; +} + +static int ne_drv_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + if (netif_running(dev)) { + ne_reset_8390(dev); + NS8390_init(dev, 1); + netif_device_attach(dev); + } + return 0; +} +#else +#define ne_drv_suspend NULL +#define ne_drv_resume NULL +#endif + +static struct platform_driver ne_driver = { + .remove = __exit_p(ne_drv_remove), + .suspend = ne_drv_suspend, + .resume = ne_drv_resume, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init ne_init(void) +{ + return platform_driver_probe(&ne_driver, ne_drv_probe); +} + +static void __exit ne_exit(void) +{ + platform_driver_unregister(&ne_driver); +} #ifdef MODULE #define MAX_NE_CARDS 4 /* Max number of NE cards per module */ @@ -832,6 +912,7 @@ ISA device autoprobes on a running machine are not recommended anyway. */ int __init init_module(void) { int this_dev, found = 0; + int plat_found = !ne_init(); for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { struct net_device *dev = alloc_ei_netdev(); @@ -845,7 +926,7 @@ int __init init_module(void) continue; } free_netdev(dev); - if (found) + if (found || plat_found) break; if (io[this_dev] != 0) printk(KERN_WARNING "ne.c: No NE*000 card found at i/o = %#x\n", io[this_dev]); @@ -853,7 +934,7 @@ int __init init_module(void) printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\" value(s) for ISA cards.\n"); return -ENXIO; } - if (found) + if (found || plat_found) return 0; return -ENODEV; } @@ -871,6 +952,7 @@ void __exit cleanup_module(void) { int this_dev; + ne_exit(); for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) { struct net_device *dev = dev_ne[this_dev]; if (dev) { @@ -880,4 +962,7 @@ void __exit cleanup_module(void) } } } +#else /* MODULE */ +module_init(ne_init); +module_exit(ne_exit); #endif /* MODULE */ diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 6a32338623f1..3439f8c649f9 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -104,7 +104,6 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/delay.h> -#include <linux/smp_lock.h> #include <linux/workqueue.h> #include <linux/init.h> #include <linux/ip.h> /* for iph */ diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c index 76fe9dd8e841..bc7f3dee6e5b 100644 --- a/drivers/net/pasemi_mac.c +++ b/drivers/net/pasemi_mac.c @@ -33,6 +33,8 @@ #include <linux/tcp.h> #include <net/checksum.h> +#include <asm/irq.h> + #include "pasemi_mac.h" @@ -51,6 +53,16 @@ #define RX_RING_SIZE 512 #define TX_RING_SIZE 512 +#define DEFAULT_MSG_ENABLE \ + (NETIF_MSG_DRV | \ + NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | \ + NETIF_MSG_IFDOWN | \ + NETIF_MSG_IFUP | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR) + #define TX_DESC(mac, num) ((mac)->tx->desc[(num) & (TX_RING_SIZE-1)]) #define TX_DESC_INFO(mac, num) ((mac)->tx->desc_info[(num) & (TX_RING_SIZE-1)]) #define RX_DESC(mac, num) ((mac)->rx->desc[(num) & (RX_RING_SIZE-1)]) @@ -59,11 +71,13 @@ #define BUF_SIZE 1646 /* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */ -/* XXXOJN these should come out of the device tree some day */ -#define PAS_DMA_CAP_BASE 0xe00d0040 -#define PAS_DMA_CAP_SIZE 0x100 -#define PAS_DMA_COM_BASE 0xe00d0100 -#define PAS_DMA_COM_SIZE 0x100 +MODULE_LICENSE("GPL"); +MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>"); +MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver"); + +static int debug = -1; /* -1 == use DEFAULT_MSG_ENABLE as value */ +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "PA Semi MAC bitmapped debugging message enable value"); static struct pasdma_status *dma_status; @@ -80,7 +94,12 @@ static int pasemi_get_mac_addr(struct pasemi_mac *mac) return -ENOENT; } - maddr = get_property(dn, "mac-address", NULL); + maddr = of_get_property(dn, "local-mac-address", NULL); + + /* Fall back to mac-address for older firmware */ + if (maddr == NULL) + maddr = of_get_property(dn, "mac-address", NULL); + if (maddr == NULL) { dev_warn(&pdev->dev, "no mac address in device tree, not configuring\n"); @@ -277,8 +296,8 @@ static void pasemi_mac_free_rx_resources(struct net_device *dev) for (i = 0; i < RX_RING_SIZE; i++) { info = &RX_DESC_INFO(mac, i); dp = &RX_DESC(mac, i); - if (info->dma) { - if (info->skb) { + if (info->skb) { + if (info->dma) { pci_unmap_single(mac->dma_pdev, info->dma, info->skb->len, @@ -309,82 +328,120 @@ static void pasemi_mac_replenish_rx_ring(struct net_device *dev) struct pasemi_mac *mac = netdev_priv(dev); unsigned int i; int start = mac->rx->next_to_fill; - unsigned int count; + unsigned int limit, count; - count = (mac->rx->next_to_clean + RX_RING_SIZE - + limit = (mac->rx->next_to_clean + RX_RING_SIZE - mac->rx->next_to_fill) & (RX_RING_SIZE - 1); /* Check to see if we're doing first-time setup */ if (unlikely(mac->rx->next_to_clean == 0 && mac->rx->next_to_fill == 0)) - count = RX_RING_SIZE; + limit = RX_RING_SIZE; - if (count <= 0) + if (limit <= 0) return; - for (i = start; i < start + count; i++) { + i = start; + for (count = limit; count; count--) { struct pasemi_mac_buffer *info = &RX_DESC_INFO(mac, i); u64 *buff = &RX_BUFF(mac, i); struct sk_buff *skb; dma_addr_t dma; - skb = dev_alloc_skb(BUF_SIZE); + /* skb might still be in there for recycle on short receives */ + if (info->skb) + skb = info->skb; + else + skb = dev_alloc_skb(BUF_SIZE); - if (!skb) { - count = i - start; + if (unlikely(!skb)) break; - } dma = pci_map_single(mac->dma_pdev, skb->data, skb->len, PCI_DMA_FROMDEVICE); - if (dma_mapping_error(dma)) { + if (unlikely(dma_mapping_error(dma))) { dev_kfree_skb_irq(info->skb); - count = i - start; break; } info->skb = skb; info->dma = dma; *buff = XCT_RXB_LEN(BUF_SIZE) | XCT_RXB_ADDR(dma); + i++; } wmb(); pci_write_config_dword(mac->dma_pdev, PAS_DMA_RXCHAN_INCR(mac->dma_rxch), - count); + limit - count); pci_write_config_dword(mac->dma_pdev, PAS_DMA_RXINT_INCR(mac->dma_if), - count); + limit - count); - mac->rx->next_to_fill += count; + mac->rx->next_to_fill += limit - count; } +static void pasemi_mac_restart_rx_intr(struct pasemi_mac *mac) +{ + unsigned int reg, stat; + /* Re-enable packet count interrupts: finally + * ack the packet count interrupt we got in rx_intr. + */ + + pci_read_config_dword(mac->iob_pdev, + PAS_IOB_DMA_RXCH_STAT(mac->dma_rxch), + &stat); + + reg = PAS_IOB_DMA_RXCH_RESET_PCNT(stat & PAS_IOB_DMA_RXCH_STAT_CNTDEL_M) + | PAS_IOB_DMA_RXCH_RESET_PINTC; + + pci_write_config_dword(mac->iob_pdev, + PAS_IOB_DMA_RXCH_RESET(mac->dma_rxch), + reg); +} + +static void pasemi_mac_restart_tx_intr(struct pasemi_mac *mac) +{ + unsigned int reg, stat; + + /* Re-enable packet count interrupts */ + pci_read_config_dword(mac->iob_pdev, + PAS_IOB_DMA_TXCH_STAT(mac->dma_txch), &stat); + + reg = PAS_IOB_DMA_TXCH_RESET_PCNT(stat & PAS_IOB_DMA_TXCH_STAT_CNTDEL_M) + | PAS_IOB_DMA_TXCH_RESET_PINTC; + + pci_write_config_dword(mac->iob_pdev, + PAS_IOB_DMA_TXCH_RESET(mac->dma_txch), reg); +} + + static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit) { - unsigned int i; - int start, count; + unsigned int n; + int count; + struct pas_dma_xct_descr *dp; + struct pasemi_mac_buffer *info; + struct sk_buff *skb; + unsigned int i, len; + u64 macrx; + dma_addr_t dma; spin_lock(&mac->rx->lock); - start = mac->rx->next_to_clean; - count = 0; + n = mac->rx->next_to_clean; - for (i = start; i < (start + RX_RING_SIZE) && count < limit; i++) { - struct pas_dma_xct_descr *dp; - struct pasemi_mac_buffer *info; - struct sk_buff *skb; - unsigned int j, len; - dma_addr_t dma; + for (count = limit; count; count--) { rmb(); - dp = &RX_DESC(mac, i); + dp = &RX_DESC(mac, n); + macrx = dp->macrx; - if (!(dp->macrx & XCT_MACRX_O)) + if (!(macrx & XCT_MACRX_O)) break; - count++; info = NULL; @@ -396,29 +453,42 @@ static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit) */ dma = (dp->ptr & XCT_PTR_ADDR_M); - for (j = start; j < (start + RX_RING_SIZE); j++) { - info = &RX_DESC_INFO(mac, j); + for (i = n; i < (n + RX_RING_SIZE); i++) { + info = &RX_DESC_INFO(mac, i); if (info->dma == dma) break; } - BUG_ON(!info); - BUG_ON(info->dma != dma); + skb = info->skb; + info->dma = 0; - pci_unmap_single(mac->dma_pdev, info->dma, info->skb->len, + pci_unmap_single(mac->dma_pdev, dma, skb->len, PCI_DMA_FROMDEVICE); - skb = info->skb; - - len = (dp->macrx & XCT_MACRX_LLEN_M) >> XCT_MACRX_LLEN_S; + len = (macrx & XCT_MACRX_LLEN_M) >> XCT_MACRX_LLEN_S; + + if (len < 256) { + struct sk_buff *new_skb = + netdev_alloc_skb(mac->netdev, len + NET_IP_ALIGN); + if (new_skb) { + skb_reserve(new_skb, NET_IP_ALIGN); + memcpy(new_skb->data - NET_IP_ALIGN, + skb->data - NET_IP_ALIGN, + len + NET_IP_ALIGN); + /* save the skb in buffer_info as good */ + skb = new_skb; + } + /* else just continue with the old one */ + } else + info->skb = NULL; skb_put(skb, len); skb->protocol = eth_type_trans(skb, mac->netdev); - if ((dp->macrx & XCT_MACRX_HTY_M) == XCT_MACRX_HTY_IPV4_OK) { + if ((macrx & XCT_MACRX_HTY_M) == XCT_MACRX_HTY_IPV4_OK) { skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = (dp->macrx & XCT_MACRX_CSUM_M) >> + skb->csum = (macrx & XCT_MACRX_CSUM_M) >> XCT_MACRX_CSUM_S; } else skb->ip_summed = CHECKSUM_NONE; @@ -428,13 +498,13 @@ static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit) netif_receive_skb(skb); - info->dma = 0; - info->skb = NULL; dp->ptr = 0; dp->macrx = 0; + + n++; } - mac->rx->next_to_clean += count; + mac->rx->next_to_clean += limit - count; pasemi_mac_replenish_rx_ring(mac->netdev); spin_unlock(&mac->rx->lock); @@ -476,6 +546,8 @@ static int pasemi_mac_clean_tx(struct pasemi_mac *mac) mac->tx->next_to_clean += count; spin_unlock_irqrestore(&mac->tx->lock, flags); + netif_wake_queue(mac->netdev); + return count; } @@ -486,18 +558,28 @@ static irqreturn_t pasemi_mac_rx_intr(int irq, void *data) struct pasemi_mac *mac = netdev_priv(dev); unsigned int reg; - if (!(*mac->rx_status & PAS_STATUS_INT)) + if (!(*mac->rx_status & PAS_STATUS_CAUSE_M)) return IRQ_NONE; - netif_rx_schedule(dev); - pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG, - PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0)); + if (*mac->rx_status & PAS_STATUS_ERROR) + printk("rx_status reported error\n"); + + /* Don't reset packet count so it won't fire again but clear + * all others. + */ + + pci_read_config_dword(mac->dma_pdev, PAS_DMA_RXINT_RCMDSTA(mac->dma_if), ®); - reg = PAS_IOB_DMA_RXCH_RESET_PINTC | PAS_IOB_DMA_RXCH_RESET_SINTC | - PAS_IOB_DMA_RXCH_RESET_DINTC; + reg = 0; + if (*mac->rx_status & PAS_STATUS_SOFT) + reg |= PAS_IOB_DMA_RXCH_RESET_SINTC; + if (*mac->rx_status & PAS_STATUS_ERROR) + reg |= PAS_IOB_DMA_RXCH_RESET_DINTC; if (*mac->rx_status & PAS_STATUS_TIMER) reg |= PAS_IOB_DMA_RXCH_RESET_TINTC; + netif_rx_schedule(dev); + pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_RXCH_RESET(mac->dma_rxch), reg); @@ -510,31 +592,137 @@ static irqreturn_t pasemi_mac_tx_intr(int irq, void *data) struct net_device *dev = data; struct pasemi_mac *mac = netdev_priv(dev); unsigned int reg; - int was_full; - was_full = mac->tx->next_to_clean - mac->tx->next_to_use == TX_RING_SIZE; - - if (!(*mac->tx_status & PAS_STATUS_INT)) + if (!(*mac->tx_status & PAS_STATUS_CAUSE_M)) return IRQ_NONE; pasemi_mac_clean_tx(mac); - reg = PAS_IOB_DMA_TXCH_RESET_PINTC | PAS_IOB_DMA_TXCH_RESET_SINTC; - if (*mac->tx_status & PAS_STATUS_TIMER) - reg |= PAS_IOB_DMA_TXCH_RESET_TINTC; + reg = PAS_IOB_DMA_TXCH_RESET_PINTC; + + if (*mac->tx_status & PAS_STATUS_SOFT) + reg |= PAS_IOB_DMA_TXCH_RESET_SINTC; + if (*mac->tx_status & PAS_STATUS_ERROR) + reg |= PAS_IOB_DMA_TXCH_RESET_DINTC; pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_RESET(mac->dma_txch), reg); - if (was_full) - netif_wake_queue(dev); - return IRQ_HANDLED; } +static void pasemi_adjust_link(struct net_device *dev) +{ + struct pasemi_mac *mac = netdev_priv(dev); + int msg; + unsigned int flags; + unsigned int new_flags; + + if (!mac->phydev->link) { + /* If no link, MAC speed settings don't matter. Just report + * link down and return. + */ + if (mac->link && netif_msg_link(mac)) + printk(KERN_INFO "%s: Link is down.\n", dev->name); + + netif_carrier_off(dev); + mac->link = 0; + + return; + } else + netif_carrier_on(dev); + + pci_read_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, &flags); + new_flags = flags & ~(PAS_MAC_CFG_PCFG_HD | PAS_MAC_CFG_PCFG_SPD_M | + PAS_MAC_CFG_PCFG_TSR_M); + + if (!mac->phydev->duplex) + new_flags |= PAS_MAC_CFG_PCFG_HD; + + switch (mac->phydev->speed) { + case 1000: + new_flags |= PAS_MAC_CFG_PCFG_SPD_1G | + PAS_MAC_CFG_PCFG_TSR_1G; + break; + case 100: + new_flags |= PAS_MAC_CFG_PCFG_SPD_100M | + PAS_MAC_CFG_PCFG_TSR_100M; + break; + case 10: + new_flags |= PAS_MAC_CFG_PCFG_SPD_10M | + PAS_MAC_CFG_PCFG_TSR_10M; + break; + default: + printk("Unsupported speed %d\n", mac->phydev->speed); + } + + /* Print on link or speed/duplex change */ + msg = mac->link != mac->phydev->link || flags != new_flags; + + mac->duplex = mac->phydev->duplex; + mac->speed = mac->phydev->speed; + mac->link = mac->phydev->link; + + if (new_flags != flags) + pci_write_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, new_flags); + + if (msg && netif_msg_link(mac)) + printk(KERN_INFO "%s: Link is up at %d Mbps, %s duplex.\n", + dev->name, mac->speed, mac->duplex ? "full" : "half"); +} + +static int pasemi_mac_phy_init(struct net_device *dev) +{ + struct pasemi_mac *mac = netdev_priv(dev); + struct device_node *dn, *phy_dn; + struct phy_device *phydev; + unsigned int phy_id; + const phandle *ph; + const unsigned int *prop; + struct resource r; + int ret; + + dn = pci_device_to_OF_node(mac->pdev); + ph = of_get_property(dn, "phy-handle", NULL); + if (!ph) + return -ENODEV; + phy_dn = of_find_node_by_phandle(*ph); + + prop = of_get_property(phy_dn, "reg", NULL); + ret = of_address_to_resource(phy_dn->parent, 0, &r); + if (ret) + goto err; + + phy_id = *prop; + snprintf(mac->phy_id, BUS_ID_SIZE, PHY_ID_FMT, (int)r.start, phy_id); + + of_node_put(phy_dn); + + mac->link = 0; + mac->speed = 0; + mac->duplex = -1; + + phydev = phy_connect(dev, mac->phy_id, &pasemi_adjust_link, 0, PHY_INTERFACE_MODE_SGMII); + + if (IS_ERR(phydev)) { + printk(KERN_ERR "%s: Could not attach to phy\n", dev->name); + return PTR_ERR(phydev); + } + + mac->phydev = phydev; + + return 0; + +err: + of_node_put(phy_dn); + return -ENODEV; +} + + static int pasemi_mac_open(struct net_device *dev) { struct pasemi_mac *mac = netdev_priv(dev); + int base_irq; unsigned int flags; int ret; @@ -558,10 +746,18 @@ static int pasemi_mac_open(struct net_device *dev) flags |= PAS_MAC_CFG_PCFG_TSR_1G | PAS_MAC_CFG_PCFG_SPD_1G; pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_RXCH_CFG(mac->dma_rxch), - PAS_IOB_DMA_RXCH_CFG_CNTTH(30)); + PAS_IOB_DMA_RXCH_CFG_CNTTH(1)); + pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_CFG(mac->dma_txch), + PAS_IOB_DMA_TXCH_CFG_CNTTH(32)); + + /* Clear out any residual packet count state from firmware */ + pasemi_mac_restart_rx_intr(mac); + pasemi_mac_restart_tx_intr(mac); + + /* 0xffffff is max value, about 16ms */ pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG, - PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(1000000)); + PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0xffffff)); pci_write_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, flags); @@ -595,31 +791,50 @@ static int pasemi_mac_open(struct net_device *dev) pasemi_mac_replenish_rx_ring(dev); + ret = pasemi_mac_phy_init(dev); + /* Some configs don't have PHYs (XAUI etc), so don't complain about + * failed init due to -ENODEV. + */ + if (ret && ret != -ENODEV) + dev_warn(&mac->pdev->dev, "phy init failed: %d\n", ret); + netif_start_queue(dev); netif_poll_enable(dev); - ret = request_irq(mac->dma_pdev->irq + mac->dma_txch, - &pasemi_mac_tx_intr, IRQF_DISABLED, + /* Interrupts are a bit different for our DMA controller: While + * it's got one a regular PCI device header, the interrupt there + * is really the base of the range it's using. Each tx and rx + * channel has it's own interrupt source. + */ + + base_irq = virq_to_hw(mac->dma_pdev->irq); + + mac->tx_irq = irq_create_mapping(NULL, base_irq + mac->dma_txch); + mac->rx_irq = irq_create_mapping(NULL, base_irq + 20 + mac->dma_txch); + + ret = request_irq(mac->tx_irq, &pasemi_mac_tx_intr, IRQF_DISABLED, mac->tx->irq_name, dev); if (ret) { dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n", - mac->dma_pdev->irq + mac->dma_txch, ret); + base_irq + mac->dma_txch, ret); goto out_tx_int; } - ret = request_irq(mac->dma_pdev->irq + 20 + mac->dma_rxch, - &pasemi_mac_rx_intr, IRQF_DISABLED, + ret = request_irq(mac->rx_irq, &pasemi_mac_rx_intr, IRQF_DISABLED, mac->rx->irq_name, dev); if (ret) { dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n", - mac->dma_pdev->irq + 20 + mac->dma_rxch, ret); + base_irq + 20 + mac->dma_rxch, ret); goto out_rx_int; } + if (mac->phydev) + phy_start(mac->phydev); + return 0; out_rx_int: - free_irq(mac->dma_pdev->irq + mac->dma_txch, dev); + free_irq(mac->tx_irq, dev); out_tx_int: netif_poll_disable(dev); netif_stop_queue(dev); @@ -639,6 +854,11 @@ static int pasemi_mac_close(struct net_device *dev) unsigned int stat; int retries; + if (mac->phydev) { + phy_stop(mac->phydev); + phy_disconnect(mac->phydev); + } + netif_stop_queue(dev); /* Clean out any pending buffers */ @@ -660,40 +880,37 @@ static int pasemi_mac_close(struct net_device *dev) pci_read_config_dword(mac->dma_pdev, PAS_DMA_TXCHAN_TCMDSTA(mac->dma_txch), &stat); - if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT) + if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)) break; cond_resched(); } - if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)) { + if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT) dev_err(&mac->dma_pdev->dev, "Failed to stop tx channel\n"); - } for (retries = 0; retries < MAX_RETRIES; retries++) { pci_read_config_dword(mac->dma_pdev, PAS_DMA_RXCHAN_CCMDSTA(mac->dma_rxch), &stat); - if (stat & PAS_DMA_RXCHAN_CCMDSTA_ACT) + if (!(stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)) break; cond_resched(); } - if (!(stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)) { + if (stat & PAS_DMA_RXCHAN_CCMDSTA_ACT) dev_err(&mac->dma_pdev->dev, "Failed to stop rx channel\n"); - } for (retries = 0; retries < MAX_RETRIES; retries++) { pci_read_config_dword(mac->dma_pdev, PAS_DMA_RXINT_RCMDSTA(mac->dma_if), &stat); - if (stat & PAS_DMA_RXINT_RCMDSTA_ACT) + if (!(stat & PAS_DMA_RXINT_RCMDSTA_ACT)) break; cond_resched(); } - if (!(stat & PAS_DMA_RXINT_RCMDSTA_ACT)) { + if (stat & PAS_DMA_RXINT_RCMDSTA_ACT) dev_err(&mac->dma_pdev->dev, "Failed to stop rx interface\n"); - } /* Then, disable the channel. This must be done separately from * stopping, since you can't disable when active. @@ -706,8 +923,8 @@ static int pasemi_mac_close(struct net_device *dev) pci_write_config_dword(mac->dma_pdev, PAS_DMA_RXINT_RCMDSTA(mac->dma_if), 0); - free_irq(mac->dma_pdev->irq + mac->dma_txch, dev); - free_irq(mac->dma_pdev->irq + 20 + mac->dma_rxch, dev); + free_irq(mac->tx_irq, dev); + free_irq(mac->rx_irq, dev); /* Free resources */ pasemi_mac_free_rx_resources(dev); @@ -802,6 +1019,7 @@ static struct net_device_stats *pasemi_mac_get_stats(struct net_device *dev) return &mac->stats; } + static void pasemi_mac_set_rx_mode(struct net_device *dev) { struct pasemi_mac *mac = netdev_priv(dev); @@ -826,18 +1044,17 @@ static int pasemi_mac_poll(struct net_device *dev, int *budget) pkts = pasemi_mac_clean_rx(mac, limit); + dev->quota -= pkts; + *budget -= pkts; + if (pkts < limit) { /* all done, no more packets present */ netif_rx_complete(dev); - /* re-enable receive interrupts */ - pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG, - PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(1000000)); + pasemi_mac_restart_rx_intr(mac); return 0; } else { /* used up our quantum, so reschedule */ - dev->quota -= pkts; - *budget -= pkts; return 1; } } @@ -937,6 +1154,11 @@ pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent) mac->rx_status = &dma_status->rx_sta[mac->dma_rxch]; mac->tx_status = &dma_status->tx_sta[mac->dma_txch]; + mac->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); + + /* Enable most messages by default */ + mac->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1; + err = register_netdev(dev); if (err) { @@ -1011,9 +1233,5 @@ int pasemi_mac_init_module(void) return pci_register_driver(&pasemi_mac_driver); } -MODULE_LICENSE("GPL"); -MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>"); -MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver"); - module_init(pasemi_mac_init_module); module_exit(pasemi_mac_cleanup_module); diff --git a/drivers/net/pasemi_mac.h b/drivers/net/pasemi_mac.h index c3e37e46a18a..8bc0cea8b145 100644 --- a/drivers/net/pasemi_mac.h +++ b/drivers/net/pasemi_mac.h @@ -24,6 +24,7 @@ #include <linux/ethtool.h> #include <linux/netdevice.h> #include <linux/spinlock.h> +#include <linux/phy.h> struct pasemi_mac_txring { spinlock_t lock; @@ -54,6 +55,7 @@ struct pasemi_mac { struct pci_dev *pdev; struct pci_dev *dma_pdev; struct pci_dev *iob_pdev; + struct phy_device *phydev; struct net_device_stats stats; /* Pointer to the cacheable per-channel status registers */ @@ -73,6 +75,14 @@ struct pasemi_mac { struct pasemi_mac_txring *tx; struct pasemi_mac_rxring *rx; + unsigned long tx_irq; + unsigned long rx_irq; + int link; + int speed; + int duplex; + + unsigned int msg_enable; + char phy_id[BUS_ID_SIZE]; }; /* Software status descriptor (desc_info) */ @@ -193,11 +203,15 @@ enum { #define PAS_DMA_RXINT_RCMDSTA(i) (0x200+(i)*_PAS_DMA_RXINT_STRIDE) #define PAS_DMA_RXINT_RCMDSTA_EN 0x00000001 #define PAS_DMA_RXINT_RCMDSTA_ST 0x00000002 -#define PAS_DMA_RXINT_RCMDSTA_OO 0x00000100 -#define PAS_DMA_RXINT_RCMDSTA_BP 0x00000200 -#define PAS_DMA_RXINT_RCMDSTA_DR 0x00000400 +#define PAS_DMA_RXINT_RCMDSTA_MBT 0x00000008 +#define PAS_DMA_RXINT_RCMDSTA_MDR 0x00000010 +#define PAS_DMA_RXINT_RCMDSTA_MOO 0x00000020 +#define PAS_DMA_RXINT_RCMDSTA_MBP 0x00000040 #define PAS_DMA_RXINT_RCMDSTA_BT 0x00000800 -#define PAS_DMA_RXINT_RCMDSTA_TB 0x00001000 +#define PAS_DMA_RXINT_RCMDSTA_DR 0x00001000 +#define PAS_DMA_RXINT_RCMDSTA_OO 0x00002000 +#define PAS_DMA_RXINT_RCMDSTA_BP 0x00004000 +#define PAS_DMA_RXINT_RCMDSTA_TB 0x00008000 #define PAS_DMA_RXINT_RCMDSTA_ACT 0x00010000 #define PAS_DMA_RXINT_RCMDSTA_DROPS_M 0xfffe0000 #define PAS_DMA_RXINT_RCMDSTA_DROPS_S 17 @@ -297,6 +311,7 @@ enum { #define PAS_STATUS_DCNT_S 16 #define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull #define PAS_STATUS_BPCNT_S 32 +#define PAS_STATUS_CAUSE_M 0xf000000000000000ull #define PAS_STATUS_TIMER 0x1000000000000000ull #define PAS_STATUS_ERROR 0x2000000000000000ull #define PAS_STATUS_SOFT 0x4000000000000000ull diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 809ec440b8eb..258d6f396186 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -1420,7 +1420,7 @@ set_addresses(struct net_device *dev) kio_addr_t ioaddr = dev->base_addr; local_info_t *lp = netdev_priv(dev); struct dev_mc_list *dmi = dev->mc_list; - char *addr; + unsigned char *addr; int i,j,k,n; SelectPage(k=0x50); @@ -1429,6 +1429,9 @@ set_addresses(struct net_device *dev) if (++n > 9) break; i = 0; + if (n > 1 && n <= dev->mc_count && dmi) { + dmi = dmi->next; + } } if (j > 15) { j = 8; @@ -1436,10 +1439,9 @@ set_addresses(struct net_device *dev) SelectPage(k); } - if (n && n <= dev->mc_count && dmi) { + if (n && n <= dev->mc_count && dmi) addr = dmi->dmi_addr; - dmi = dmi->next; - } else + else addr = dev->dev_addr; if (lp->mohawk) @@ -1465,10 +1467,10 @@ set_multicast_list(struct net_device *dev) if (dev->flags & IFF_PROMISC) { /* snoop */ PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */ } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) { - PutByte(XIRCREG42_SWC1, 0x06); /* set MPE */ + PutByte(XIRCREG42_SWC1, 0x02); /* set MPE */ } else if (dev->mc_count) { /* the chip can filter 9 addresses perfectly */ - PutByte(XIRCREG42_SWC1, 0x00); + PutByte(XIRCREG42_SWC1, 0x01); SelectPage(0x40); PutByte(XIRCREG40_CMD0, Offline); set_addresses(dev); diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 6d596ca50cfd..541168713f1f 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -40,7 +40,6 @@ #include <linux/ip.h> #include <linux/tcp.h> #include <linux/spinlock.h> -#include <linux/smp_lock.h> #include <linux/rwsem.h> #include <linux/stddef.h> #include <linux/device.h> diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 21afe108d3cb..b07da1054add 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -135,10 +135,13 @@ static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs, /* Wake on Lan only supported on Yukon chips with rev 1 or above */ static u32 wol_supported(const struct skge_hw *hw) { - if (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev != 0) - return WAKE_MAGIC | WAKE_PHY; - else + if (hw->chip_id == CHIP_ID_GENESIS) return 0; + + if (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0) + return 0; + + return WAKE_MAGIC | WAKE_PHY; } static u32 pci_wake_enabled(struct pci_dev *dev) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 238c2ca34da6..a307310f13f5 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -124,10 +124,7 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */ -#ifdef broken - /* This device causes data corruption problems that are not resolved */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */ -#endif { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */ @@ -3581,10 +3578,21 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out; } + /* Some Gigabyte motherboards have 88e8056 but cause problems + * There is some unresolved hardware related problem that causes + * descriptor errors and receive data corruption. + */ + if (pdev->vendor == PCI_VENDOR_ID_MARVELL && + pdev->device == 0x4364 && pdev->subsystem_vendor == 0x1458) { + dev_err(&pdev->dev, + "88E8056 on Gigabyte motherboards not supported\n"); + goto err_out_disable; + } + err = pci_request_regions(pdev, DRV_NAME); if (err) { dev_err(&pdev->dev, "cannot obtain PCI resources\n"); - goto err_out; + goto err_out_disable; } pci_set_master(pdev); @@ -3721,6 +3729,7 @@ err_out_free_hw: kfree(hw); err_out_free_regions: pci_release_regions(pdev); +err_out_disable: pci_disable_device(pdev); err_out: return err; diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 7053026d6c76..111f23d05764 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -279,6 +279,40 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_insw(a, r, p, l) insw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) +#elif defined(CONFIG_SUPERH) + +#if defined(CONFIG_SH_7780_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE) +#define SMC_CAN_USE_8BIT 0 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 0 +#define SMC_IO_SHIFT 0 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) (inw((a) + ((r)&~1)) >> (8*(r%2)))&0xff +#define SMC_inw(a, r) inw((a) + (r)) +#define SMC_outb(v, a, r) outw(((inw((a)+((r)&~1))*(0xff<<8*(r%2)))) | ((v)<<(8*(r&2)))), (a) + ((r)&~1)) + +#define SMC_outw(v, a, r) outw(v, (a) + (r)) +#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) + +#else /* BOARDS */ + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 + +#define SMC_inb(a, r) inb((a) + (r)) +#define SMC_inw(a, r) inw((a) + (r)) +#define SMC_outb(v, a, r) outb(v, (a) + (r)) +#define SMC_outw(v, a, r) outw(v, (a) + (r)) +#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) +#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) + +#endif /* BOARDS */ + +#define set_irq_type(irq, type) do {} while (0) + #elif defined(CONFIG_M32R) #define SMC_CAN_USE_8BIT 0 diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 230da14b1b68..c15e97253ede 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1830,7 +1830,7 @@ try_host_fw: if (!dn) goto out_err; - fw_prop = get_property(dn, "firmware", &fw_size); + fw_prop = of_get_property(dn, "firmware", &fw_size); if (!fw_prop) goto out_err; @@ -2236,7 +2236,7 @@ spider_net_setup_netdev(struct spider_net_card *card) if (!dn) return -EIO; - mac = get_property(dn, "local-mac-address", NULL); + mac = of_get_property(dn, "local-mac-address", NULL); if (!mac) return -EIO; memcpy(addr.sa_data, mac, ETH_ALEN); diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 5da73212ac91..432803855034 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -2903,7 +2903,7 @@ static int __devinit gem_get_device_address(struct gem *gp) struct net_device *dev = gp->dev; const unsigned char *addr; - addr = get_property(gp->of_node, "local-mac-address", NULL); + addr = of_get_property(gp->of_node, "local-mac-address", NULL); if (addr == NULL) { #ifdef CONFIG_SPARC addr = idprom->id_ethaddr; diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c index 56a110ca5e6f..61843fd57525 100644 --- a/drivers/net/sungem_phy.c +++ b/drivers/net/sungem_phy.c @@ -451,7 +451,7 @@ static int bcm5421_init(struct mii_phy* phy) if (phy->platform_data) { struct device_node *np = of_get_parent(phy->platform_data); int can_low_power = 1; - if (np == NULL || get_property(np, "no-autolowpower", NULL)) + if (np == NULL || of_get_property(np, "no-autolowpower", NULL)) can_low_power = 0; if (can_low_power) { /* Enable automatic low-power */ diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index f1e2dfc795a2..463d600ed83d 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -540,7 +540,6 @@ static struct sk_buff *alloc_rxbuf_skb(struct net_device *dev, skb = dev_alloc_skb(RX_BUF_SIZE); if (!skb) return NULL; - skb->dev = dev; *dma_handle = pci_map_single(hwdev, skb->data, RX_BUF_SIZE, PCI_DMA_FROMDEVICE); if (pci_dma_mapping_error(*dma_handle)) { diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index 0bfc2c9c1c08..1aabc91f6458 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -82,6 +82,7 @@ struct tsi108_prv_data { unsigned int phy; /* Index of PHY for this interface */ unsigned int irq_num; unsigned int id; + unsigned int phy_type; struct timer_list timer;/* Timer that triggers the check phy function */ unsigned int rxtail; /* Next entry in rxring to read */ @@ -1256,11 +1257,11 @@ static void tsi108_init_phy(struct net_device *dev) if (i == 0) printk(KERN_ERR "%s function time out \n", __FUNCTION__); -#if (TSI108_PHY_TYPE == PHY_BCM54XX) /* Broadcom BCM54xx PHY */ - tsi108_write_mii(data, 0x09, 0x0300); - tsi108_write_mii(data, 0x10, 0x1020); - tsi108_write_mii(data, 0x1c, 0x8c00); -#endif + if (data->phy_type == TSI108_PHY_BCM54XX) { + tsi108_write_mii(data, 0x09, 0x0300); + tsi108_write_mii(data, 0x10, 0x1020); + tsi108_write_mii(data, 0x1c, 0x8c00); + } tsi108_write_mii(data, MII_BMCR, @@ -1587,6 +1588,7 @@ tsi108_init_one(struct platform_device *pdev) data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if); data->phy = einfo->phy; + data->phy_type = einfo->phy_type; data->irq_num = einfo->irq_num; data->id = pdev->id; dev->open = tsi108_open; diff --git a/drivers/net/tsi108_eth.h b/drivers/net/tsi108_eth.h index 77a769df228a..5a77ae6c5f36 100644 --- a/drivers/net/tsi108_eth.h +++ b/drivers/net/tsi108_eth.h @@ -43,15 +43,6 @@ in_be32((data->phyregs + (offset))) /* - * PHY Configuration Options - * - * NOTE: Enable set of definitions corresponding to your board type - */ -#define PHY_MV88E 1 /* Marvel 88Exxxx PHY */ -#define PHY_BCM54XX 2 /* Broardcom BCM54xx PHY */ -#define TSI108_PHY_TYPE PHY_MV88E - -/* * TSI108 GIGE port registers */ diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 16b9acdabbe8..d7aff8189377 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3787,7 +3787,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ugeth_vdbg("%s: IN", __FUNCTION__); - prop = get_property(np, "device-id", NULL); + prop = of_get_property(np, "device-id", NULL); ucc_num = *prop - 1; if ((ucc_num < 0) || (ucc_num > 7)) return -ENODEV; @@ -3795,9 +3795,9 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ug_info = &ugeth_info[ucc_num]; ug_info->uf_info.ucc_num = ucc_num; - prop = get_property(np, "rx-clock", NULL); + prop = of_get_property(np, "rx-clock", NULL); ug_info->uf_info.rx_clock = *prop; - prop = get_property(np, "tx-clock", NULL); + prop = of_get_property(np, "tx-clock", NULL); ug_info->uf_info.tx_clock = *prop; err = of_address_to_resource(np, 0, &res); if (err) @@ -3806,23 +3806,23 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ug_info->uf_info.regs = res.start; ug_info->uf_info.irq = irq_of_parse_and_map(np, 0); - ph = get_property(np, "phy-handle", NULL); + ph = of_get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); if (phy == NULL) return -ENODEV; /* set the PHY address */ - prop = get_property(phy, "reg", NULL); + prop = of_get_property(phy, "reg", NULL); if (prop == NULL) return -1; ug_info->phy_address = *prop; /* get the phy interface type, or default to MII */ - prop = get_property(np, "interface-type", NULL); + prop = of_get_property(np, "interface-type", NULL); if (!prop) { /* handle interface property present in old trees */ - prop = get_property(phy, "interface", NULL); + prop = of_get_property(phy, "interface", NULL); if (prop != NULL) phy_interface = enet_to_phy_interface[*prop]; else @@ -3832,10 +3832,10 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma } /* get speed, or derive from interface */ - prop = get_property(np, "max-speed", NULL); + prop = of_get_property(np, "max-speed", NULL); if (!prop) { /* handle interface property present in old trees */ - prop = get_property(phy, "interface", NULL); + prop = of_get_property(phy, "interface", NULL); if (prop != NULL) max_speed = enet_to_speed[*prop]; } else { diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index 73b5a538e8f4..27a1ef3b7b06 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -172,7 +172,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma while ((child = of_get_next_child(np, child)) != NULL) { int irq = irq_of_parse_and_map(child, 0); if (irq != NO_IRQ) { - const u32 *id = get_property(child, "reg", NULL); + const u32 *id = of_get_property(child, "reg", NULL); new_bus->irq[*id] = irq; } } @@ -203,7 +203,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma if ((res.start >= tempres.start) && (res.end <= tempres.end)) { /* set this UCC to be the MII master */ - const u32 *id = get_property(tempnp, "device-id", NULL); + const u32 *id = of_get_property(tempnp, "device-id", NULL); if (id == NULL) goto bus_register_fail; diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 23464735fa88..9ef49ce148b2 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -90,7 +90,6 @@ #include <linux/ioport.h> #include <linux/netdevice.h> #include <linux/spinlock.h> -#include <linux/smp_lock.h> #include <linux/device.h> #undef COSA_SLOW_IO /* for testing purposes only */ diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 0184614517f9..e273347dc606 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -267,7 +267,7 @@ config IPW2200_DEBUG config LIBERTAS_USB tristate "Marvell Libertas 8388 802.11a/b/g cards" - depends on NET_RADIO && USB + depends on USB && WLAN_80211 select FW_LOADER ---help--- A driver for Marvell Libertas 8388 USB devices. diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index f21bbafcb728..2d3a180dada0 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -25,7 +25,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/proc_fs.h> -#include <linux/smp_lock.h> #include <linux/sched.h> #include <linux/ptrace.h> diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index cb08bc5db2bd..cdea7f71b9eb 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1,7 +1,6 @@ /* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */ #include <linux/types.h> -#include <linux/smp_lock.h> #include <linux/ethtool.h> #include <net/ieee80211_crypt.h> diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 21c4c299b3d6..5b86ee5c1eeb 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -38,7 +38,6 @@ #include <linux/pci.h> #include <linux/ioport.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <asm/byteorder.h> #include <asm/pdc.h> diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 316c06f4423c..8b7d84eca05d 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -201,7 +201,7 @@ static int parport_config(struct pcmcia_device *link) p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2, link->irq.AssignedIRQ, PARPORT_DMA_NONE, - NULL); + &link->dev); if (p == NULL) { printk(KERN_NOTICE "parport_cs: parport_pc_probe_port() at " "0x%3x, irq %u failed\n", link->io.BasePort1, diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c index e5b0a544de40..77726fc49766 100644 --- a/drivers/parport/parport_mfc3.c +++ b/drivers/parport/parport_mfc3.c @@ -356,6 +356,7 @@ static int __init parport_mfc3_init(void) if (request_irq(IRQ_AMIGA_PORTS, mfc3_interrupt, IRQF_SHARED, p->name, &pp_mfc3_ops)) goto out_irq; } + p->dev = &z->dev; this_port[pias++] = p; printk(KERN_INFO "%s: Multiface III port using irq\n", p->name); diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 3de2623afa13..02c0d52c9f76 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -53,6 +53,7 @@ #include <linux/slab.h> #include <linux/pci.h> #include <linux/pnp.h> +#include <linux/platform_device.h> #include <linux/sysctl.h> #include <asm/io.h> @@ -620,6 +621,7 @@ static size_t parport_pc_fifo_write_block_dma (struct parport *port, unsigned long dmaflag; size_t left = length; const struct parport_pc_private *priv = port->physport->private_data; + struct device *dev = port->physport->dev; dma_addr_t dma_addr, dma_handle; size_t maxlen = 0x10000; /* max 64k per DMA transfer */ unsigned long start = (unsigned long) buf; @@ -631,8 +633,8 @@ dump_parport_state ("enter fifo_write_block_dma", port); if ((start ^ end) & ~0xffffUL) maxlen = 0x10000 - (start & 0xffff); - dma_addr = dma_handle = pci_map_single(priv->dev, (void *)buf, length, - PCI_DMA_TODEVICE); + dma_addr = dma_handle = dma_map_single(dev, (void *)buf, length, + DMA_TO_DEVICE); } else { /* above 16 MB we use a bounce buffer as ISA-DMA is not possible */ maxlen = PAGE_SIZE; /* sizeof(priv->dma_buf) */ @@ -728,9 +730,9 @@ dump_parport_state ("enter fifo_write_block_dma", port); /* Turn off DMA mode */ frob_econtrol (port, 1<<3, 0); - + if (dma_handle) - pci_unmap_single(priv->dev, dma_handle, length, PCI_DMA_TODEVICE); + dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE); dump_parport_state ("leave fifo_write_block_dma", port); return length - left; @@ -2146,7 +2148,7 @@ static DEFINE_SPINLOCK(ports_lock); struct parport *parport_pc_probe_port (unsigned long int base, unsigned long int base_hi, int irq, int dma, - struct pci_dev *dev) + struct device *dev) { struct parport_pc_private *priv; struct parport_operations *ops; @@ -2155,6 +2157,17 @@ struct parport *parport_pc_probe_port (unsigned long int base, struct resource *base_res; struct resource *ECR_res = NULL; struct resource *EPP_res = NULL; + struct platform_device *pdev = NULL; + + if (!dev) { + /* We need a physical device to attach to, but none was + * provided. Create our own. */ + pdev = platform_device_register_simple("parport_pc", + base, NULL, 0); + if (IS_ERR(pdev)) + return NULL; + dev = &pdev->dev; + } ops = kmalloc(sizeof (struct parport_operations), GFP_KERNEL); if (!ops) @@ -2180,9 +2193,10 @@ struct parport *parport_pc_probe_port (unsigned long int base, priv->fifo_depth = 0; priv->dma_buf = NULL; priv->dma_handle = 0; - priv->dev = dev; INIT_LIST_HEAD(&priv->list); priv->port = p; + + p->dev = dev; p->base_hi = base_hi; p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT; p->private_data = priv; @@ -2305,9 +2319,10 @@ struct parport *parport_pc_probe_port (unsigned long int base, p->dma = PARPORT_DMA_NONE; } else { priv->dma_buf = - pci_alloc_consistent(priv->dev, + dma_alloc_coherent(dev, PAGE_SIZE, - &priv->dma_handle); + &priv->dma_handle, + GFP_KERNEL); if (! priv->dma_buf) { printk (KERN_WARNING "%s: " "cannot get buffer for DMA, " @@ -2356,6 +2371,8 @@ out3: out2: kfree (ops); out1: + if (pdev) + platform_device_unregister(pdev); return NULL; } @@ -2383,7 +2400,7 @@ void parport_pc_unregister_port (struct parport *p) release_region(p->base_hi, 3); #if defined(CONFIG_PARPORT_PC_FIFO) && defined(HAS_DMA) if (priv->dma_buf) - pci_free_consistent(priv->dev, PAGE_SIZE, + dma_free_coherent(p->physport->dev, PAGE_SIZE, priv->dma_buf, priv->dma_handle); #endif @@ -2489,7 +2506,7 @@ static int __devinit sio_ite_8872_probe (struct pci_dev *pdev, int autoirq, */ release_resource(base_res); if (parport_pc_probe_port (ite8872_lpt, ite8872_lpthi, - irq, PARPORT_DMA_NONE, NULL)) { + irq, PARPORT_DMA_NONE, &pdev->dev)) { printk (KERN_INFO "parport_pc: ITE 8872 parallel port: io=0x%X", ite8872_lpt); @@ -2672,7 +2689,7 @@ static int __devinit sio_via_probe (struct pci_dev *pdev, int autoirq, } /* finally, do the probe with values obtained */ - if (parport_pc_probe_port (port1, port2, irq, dma, NULL)) { + if (parport_pc_probe_port (port1, port2, irq, dma, &pdev->dev)) { printk (KERN_INFO "parport_pc: VIA parallel port: io=0x%X", port1); if (irq != PARPORT_IRQ_NONE) @@ -2970,7 +2987,7 @@ static int parport_pc_pci_probe (struct pci_dev *dev, parport_pc_pci_tbl[i + last_sio].device, io_lo, io_hi); data->ports[count] = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE, - PARPORT_DMA_NONE, dev); + PARPORT_DMA_NONE, &dev->dev); if (data->ports[count]) count++; } @@ -3077,8 +3094,8 @@ static int parport_pc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id } else dma = PARPORT_DMA_NONE; - printk(KERN_INFO "parport: PnPBIOS parport detected.\n"); - if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, NULL))) + dev_info(&dev->dev, "reported by %s\n", dev->protocol->name); + if (!(pdata = parport_pc_probe_port (io_lo, io_hi, irq, dma, &dev->dev))) return -ENODEV; pnp_set_drvdata(dev,pdata); @@ -3103,6 +3120,21 @@ static struct pnp_driver parport_pc_pnp_driver = { }; +static int __devinit parport_pc_platform_probe(struct platform_device *pdev) +{ + /* Always succeed, the actual probing is done in + * parport_pc_probe_port(). */ + return 0; +} + +static struct platform_driver parport_pc_platform_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "parport_pc", + }, + .probe = parport_pc_platform_probe, +}; + /* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */ static int __devinit __attribute__((unused)) parport_pc_find_isa_ports (int autoirq, int autodma) @@ -3378,9 +3410,15 @@ __setup("parport_init_mode=",parport_init_mode_setup); static int __init parport_pc_init(void) { + int err; + if (parse_parport_params()) return -EINVAL; + err = platform_driver_register(&parport_pc_platform_driver); + if (err) + return err; + if (io[0]) { int i; /* Only probe the ports we were given. */ @@ -3405,6 +3443,7 @@ static void __exit parport_pc_exit(void) pci_unregister_driver (&parport_pc_pci_driver); if (pnp_registered_parport) pnp_unregister_driver (&parport_pc_pnp_driver); + platform_driver_unregister(&parport_pc_platform_driver); spin_lock(&ports_lock); while (!list_empty(&ports_list)) { @@ -3413,6 +3452,9 @@ static void __exit parport_pc_exit(void) priv = list_entry(ports_list.next, struct parport_pc_private, list); port = priv->port; + if (port->dev && port->dev->bus == &platform_bus_type) + platform_device_unregister( + to_platform_device(port->dev)); spin_unlock(&ports_lock); parport_pc_unregister_port(port); spin_lock(&ports_lock); diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index 78c0a269a2ba..90ea3b8b99b0 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -305,7 +305,7 @@ static int __devinit parport_register (struct pci_dev *dev, dev_dbg(&dev->dev, "PCI parallel port detected: I/O at " "%#lx(%#lx)\n", io_lo, io_hi); port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE, - PARPORT_DMA_NONE, dev); + PARPORT_DMA_NONE, &dev->dev); if (port) { priv->port[priv->num_par++] = port; success = 1; @@ -392,6 +392,7 @@ static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state) static int parport_serial_pci_resume(struct pci_dev *dev) { struct parport_serial_private *priv = pci_get_drvdata(dev); + int err; pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); @@ -399,7 +400,12 @@ static int parport_serial_pci_resume(struct pci_dev *dev) /* * The device may have been disabled. Re-enable it. */ - pci_enable_device(dev); + err = pci_enable_device(dev); + if (err) { + printk(KERN_ERR "parport_serial: %s: error enabling " + "device for resume (%d)\n", pci_name(dev), err); + return err; + } if (priv->serial) pciserial_resume_ports(priv->serial); diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c index 400bb90084cf..d27019c2f860 100644 --- a/drivers/parport/parport_sunbpp.c +++ b/drivers/parport/parport_sunbpp.c @@ -322,6 +322,7 @@ static int __devinit init_one_port(struct sbus_dev *sdev) goto out_free_ops; p->size = size; + p->dev = &sdev->ofdev.dev; if ((err = request_irq(p->irq, parport_sunbpp_interrupt, IRQF_SHARED, p->name, p)) != 0) { diff --git a/drivers/parport/share.c b/drivers/parport/share.c index fd9129e424f9..cd66442acfee 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -365,6 +365,11 @@ void parport_announce_port (struct parport *port) parport_daisy_init(port); #endif + if (!port->dev) + printk(KERN_WARNING "%s: fix this legacy " + "no-device port driver!\n", + port->name); + parport_proc_register(port); mutex_lock(®istration_lock); spin_lock_irq(&parportlist_lock); diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 40c79b03c7ef..fa5c0197d571 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -40,7 +40,6 @@ #include <linux/pci_hotplug.h> #include <linux/slab.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include "acpiphp.h" #define MY_NAME "acpiphp" diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index fca978fb158e..9ef4e989afc4 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -46,7 +46,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/pci_hotplug.h> -#include <linux/smp_lock.h> #include <linux/mutex.h> #include "../pci.h" diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c index 59392946c2bd..0316eeaaeb29 100644 --- a/drivers/pci/hotplug/ibmphp_core.c +++ b/drivers/pci/hotplug/ibmphp_core.c @@ -34,7 +34,6 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/wait.h> -#include <linux/smp_lock.h> #include "../pci.h" #include "../../../arch/i386/pci/pci.h" /* for struct irq_routing_table */ #include "ibmphp.h" diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c index f55ac3885cb3..46abaa8c41f1 100644 --- a/drivers/pci/hotplug/ibmphp_hpc.c +++ b/drivers/pci/hotplug/ibmphp_hpc.c @@ -32,7 +32,6 @@ #include <linux/delay.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/mutex.h> diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 63f3bd1eecc4..bd433ef6bfc6 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -34,7 +34,6 @@ #include <linux/sysfs.h> #include <linux/pagemap.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <linux/mount.h> #include <linux/namei.h> diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 847936fe327e..458c08ef2654 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -29,7 +29,6 @@ #include <linux/pci_hotplug.h> #include <linux/slab.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/init.h> #include <asm/eeh.h> /* for eeh_add_device() */ #include <asm/rtas.h> /* rtas_call */ @@ -170,10 +169,10 @@ static int get_children_props(struct device_node *dn, const int **drc_indexes, { const int *indexes, *names, *types, *domains; - indexes = get_property(dn, "ibm,drc-indexes", NULL); - names = get_property(dn, "ibm,drc-names", NULL); - types = get_property(dn, "ibm,drc-types", NULL); - domains = get_property(dn, "ibm,drc-power-domains", NULL); + indexes = of_get_property(dn, "ibm,drc-indexes", NULL); + names = of_get_property(dn, "ibm,drc-names", NULL); + types = of_get_property(dn, "ibm,drc-types", NULL); + domains = of_get_property(dn, "ibm,drc-power-domains", NULL); if (!indexes || !names || !types || !domains) { /* Slot does not have dynamically-removable children */ @@ -206,7 +205,7 @@ int rpaphp_get_drc_props(struct device_node *dn, int *drc_index, char *name_tmp, *type_tmp; int i, rc; - my_index = get_property(dn, "ibm,my-drc-index", NULL); + my_index = of_get_property(dn, "ibm,my-drc-index", NULL); if (!my_index) { /* Node isn't DLPAR/hotplug capable */ return -EINVAL; diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 2c94d44279a3..d2fc35598cdd 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -30,7 +30,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> -#include <linux/smp_lock.h> #include <linux/pci.h> #include <linux/workqueue.h> #include "../pci.h" diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 9e1321d0d5e6..e6740d1a0824 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -12,7 +12,6 @@ #include <linux/interrupt.h> #include <linux/init.h> #include <linux/ioport.h> -#include <linux/smp_lock.h> #include <linux/pci.h> #include <linux/proc_fs.h> #include <linux/msi.h> diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index ed87aa59f0b1..0425a7b7350d 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -11,7 +11,6 @@ #include <linux/module.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/smp_lock.h> #include <asm/uaccess.h> #include <asm/byteorder.h> diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c index fda06941e730..383107ba4bd3 100644 --- a/drivers/pcmcia/pxa2xx_mainstone.c +++ b/drivers/pcmcia/pxa2xx_mainstone.c @@ -175,6 +175,7 @@ static int __init mst_pcmcia_init(void) if (!mst_pcmcia_device) return -ENOMEM; + mst_pcmcia_device->dev.uevent_suppress = 0; mst_pcmcia_device->dev.platform_data = &mst_pcmcia_ops; ret = platform_device_add(mst_pcmcia_device); diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index b7b9e149c5b9..a2daa3f531b2 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -261,6 +261,7 @@ static int __init sharpsl_pcmcia_init(void) if (!sharpsl_pcmcia_device) return -ENOMEM; + sharpsl_pcmcia_device->dev.uevent_suppress = 0; sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops; sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev; diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c index aec83ec5ea23..3e20b1cc7778 100644 --- a/drivers/pnp/core.c +++ b/drivers/pnp/core.c @@ -14,6 +14,7 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/errno.h> +#include <linux/dma-mapping.h> #include "base.h" @@ -22,6 +23,14 @@ static LIST_HEAD(pnp_protocols); LIST_HEAD(pnp_global); DEFINE_SPINLOCK(pnp_lock); +/* + * ACPI or PNPBIOS should tell us about all platform devices, so we can + * skip some blind probes. ISAPNP typically enumerates only plug-in ISA + * devices, not built-in things like COM ports. + */ +int pnp_platform_devices; +EXPORT_SYMBOL(pnp_platform_devices); + void *pnp_alloc(long size) { void *result; @@ -114,6 +123,8 @@ int __pnp_add_device(struct pnp_dev *dev) int ret; pnp_fixup_device(dev); dev->dev.bus = &pnp_bus_type; + dev->dev.dma_mask = &dev->dma_mask; + dev->dma_mask = dev->dev.coherent_dma_mask = DMA_24BIT_MASK; dev->dev.release = &pnp_release_device; dev->status = PNP_READY; spin_lock(&pnp_lock); diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index 62eda5d59024..a00548799e98 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -3,7 +3,7 @@ * * Copyright (c) 2004 Matthieu Castet <castet.matthieu@free.fr> * Copyright (c) 2004 Li Shaohua <shaohua.li@intel.com> - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any @@ -18,7 +18,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - + #include <linux/acpi.h> #include <linux/pnp.h> #include <acpi/acpi_bus.h> @@ -82,7 +82,7 @@ static void __init pnpidacpi_to_pnpid(char *id, char *str) static int pnpacpi_get_resources(struct pnp_dev * dev, struct pnp_resource_table * res) { acpi_status status; - status = pnpacpi_parse_allocated_resource((acpi_handle)dev->data, + status = pnpacpi_parse_allocated_resource((acpi_handle)dev->data, &dev->res); return ACPI_FAILURE(status) ? -ENODEV : 0; } @@ -112,9 +112,9 @@ static int pnpacpi_set_resources(struct pnp_dev * dev, struct pnp_resource_table static int pnpacpi_disable_resources(struct pnp_dev *dev) { acpi_status status; - + /* acpi_unregister_gsi(pnp_irq(dev, 0)); */ - status = acpi_evaluate_object((acpi_handle)dev->data, + status = acpi_evaluate_object((acpi_handle)dev->data, "_DIS", NULL, NULL); return ACPI_FAILURE(status) ? -ENODEV : 0; } @@ -167,7 +167,7 @@ static int __init pnpacpi_add_device(struct acpi_device *device) strncpy(dev->name, acpi_device_bid(device), sizeof(dev->name)); dev->number = num; - + /* set the initial values for the PnP device */ dev_id = kzalloc(sizeof(struct pnp_id), GFP_KERNEL); if (!dev_id) @@ -185,14 +185,14 @@ static int __init pnpacpi_add_device(struct acpi_device *device) } if(dev->capabilities & PNP_CONFIGURABLE) { - status = pnpacpi_parse_resource_option_data(device->handle, + status = pnpacpi_parse_resource_option_data(device->handle, dev); if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { pnp_err("PnPACPI: METHOD_NAME__PRS failure for %s", dev_id->id); goto err1; } } - + /* parse compatible ids */ if (device->flags.compatible_ids) { struct acpi_compatible_id_list *cid_list = device->pnp.cid_list; @@ -236,6 +236,42 @@ static acpi_status __init pnpacpi_add_device_handler(acpi_handle handle, return AE_OK; } +static int __init acpi_pnp_match(struct device *dev, void *_pnp) +{ + struct acpi_device *acpi = to_acpi_device(dev); + struct pnp_dev *pnp = _pnp; + + /* true means it matched */ + return acpi->flags.hardware_id + && !acpi_get_physical_device(acpi->handle) + && compare_pnp_id(pnp->id, acpi->pnp.hardware_id); +} + +static int __init acpi_pnp_find_device(struct device *dev, acpi_handle *handle) +{ + struct device *adev; + struct acpi_device *acpi; + + adev = bus_find_device(&acpi_bus_type, NULL, + to_pnp_dev(dev), + acpi_pnp_match); + if (!adev) + return -ENODEV; + + acpi = to_acpi_device(adev); + *handle = acpi->handle; + put_device(adev); + return 0; +} + +/* complete initialization of a PNPACPI device includes having + * pnpdev->dev.archdata.acpi_handle point to its ACPI sibling. + */ +static struct acpi_bus_type __initdata acpi_pnp_bus = { + .bus = &pnp_bus_type, + .find_device = acpi_pnp_find_device, +}; + int pnpacpi_disabled __initdata; static int __init pnpacpi_init(void) { @@ -245,8 +281,11 @@ static int __init pnpacpi_init(void) } pnp_info("PnP ACPI init"); pnp_register_protocol(&pnpacpi_protocol); + register_acpi_bus_type(&acpi_pnp_bus); acpi_get_devices(NULL, pnpacpi_add_device_handler, NULL, NULL); pnp_info("PnP ACPI: found %d devices", num); + unregister_acpi_bus_type(&acpi_pnp_bus); + pnp_platform_devices = 1; return 0; } subsys_initcall(pnpacpi_init); diff --git a/drivers/pnp/pnpbios/core.c b/drivers/pnp/pnpbios/core.c index 95738dbd5d45..3a201b77b963 100644 --- a/drivers/pnp/pnpbios/core.c +++ b/drivers/pnp/pnpbios/core.c @@ -62,6 +62,7 @@ #include <linux/delay.h> #include <linux/acpi.h> #include <linux/freezer.h> +#include <linux/kthread.h> #include <asm/page.h> #include <asm/desc.h> @@ -159,9 +160,7 @@ static int pnp_dock_thread(void * unused) { static struct pnp_docking_station_info now; int docked = -1, d = 0; - daemonize("kpnpbiosd"); - allow_signal(SIGKILL); - while(!unloading && !signal_pending(current)) + while (!unloading) { int status; @@ -170,11 +169,8 @@ static int pnp_dock_thread(void * unused) */ msleep_interruptible(2000); - if(signal_pending(current)) { - if (try_to_freeze()) - continue; - break; - } + if (try_to_freeze()) + continue; status = pnp_bios_dock_station_info(&now); @@ -574,6 +570,7 @@ static int __init pnpbios_init(void) /* scan for pnpbios devices */ build_devlist(); + pnp_platform_devices = 1; return 0; } @@ -581,6 +578,7 @@ subsys_initcall(pnpbios_init); static int __init pnpbios_thread_init(void) { + struct task_struct *task; #if defined(CONFIG_PPC_MERGE) if (check_legacy_ioport(PNPBIOS_BASE)) return 0; @@ -589,7 +587,8 @@ static int __init pnpbios_thread_init(void) return 0; #ifdef CONFIG_HOTPLUG init_completion(&unload_sem); - if (kernel_thread(pnp_dock_thread, NULL, CLONE_KERNEL) > 0) + task = kthread_run(pnp_dock_thread, NULL, "kpnpbiosd"); + if (!IS_ERR(task)) unloading = 0; #endif return 0; diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index e97ecefe8584..277df50c89ae 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -16,6 +16,7 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/pnp.h> +#include <linux/io.h> #include "base.h" @@ -106,6 +107,34 @@ static void quirk_sb16audio_resources(struct pnp_dev *dev) return; } +static void quirk_smc_enable(struct pnp_dev *dev) +{ + unsigned int firbase; + + if (!dev->active || !pnp_port_valid(dev, 1)) + return; + + /* + * On the HP/Compaq nw8240 (and probably other similar machines), + * there is an SMCF010 device with two I/O port regions: + * + * 0x3e8-0x3ef SIR + * 0x100-0x10f FIR + * + * _STA reports the device is enabled, but in fact, the BIOS + * neglects to enable the FIR range. Fortunately, it does fully + * enable the device if we call _SRS. + */ + firbase = pnp_port_start(dev, 1); + if (inb(firbase + 0x7 /* IRCC_MASTER */) == 0xff) { + pnp_err("%s (%s) enabled but not responding, disabling and " + "re-enabling", dev->dev.bus_id, pnp_dev_name(dev)); + pnp_disable_dev(dev); + pnp_activate_dev(dev); + } +} + + /* * PnP Quirks * Cards or devices that need some tweaking due to incomplete resource info @@ -126,6 +155,7 @@ static struct pnp_fixup pnp_fixups[] = { { "CTL0043", quirk_sb16audio_resources }, { "CTL0044", quirk_sb16audio_resources }, { "CTL0045", quirk_sb16audio_resources }, + { "SMCf010", quirk_smc_enable }, { "" } }; diff --git a/drivers/ps3/vuart.c b/drivers/ps3/vuart.c index 7d7cab1d91b4..ec2d36a1bc67 100644 --- a/drivers/ps3/vuart.c +++ b/drivers/ps3/vuart.c @@ -886,12 +886,12 @@ static int ps3_vuart_probe(struct device *_dev) if (++vuart_bus_priv.use_count == 1) { - result = ps3_alloc_vuart_irq(PS3_BINDING_CPU_ANY, + result = ps3_vuart_irq_setup(PS3_BINDING_CPU_ANY, (void*)&vuart_bus_priv.bmp.status, &vuart_bus_priv.virq); if (result) { dev_dbg(&dev->core, - "%s:%d: ps3_alloc_vuart_irq failed (%d)\n", + "%s:%d: ps3_vuart_irq_setup failed (%d)\n", __func__, __LINE__, result); result = -EPERM; goto fail_alloc_irq; @@ -937,7 +937,7 @@ static int ps3_vuart_probe(struct device *_dev) fail_probe: ps3_vuart_set_interrupt_mask(dev, 0); fail_request_irq: - ps3_free_vuart_irq(vuart_bus_priv.virq); + ps3_vuart_irq_destroy(vuart_bus_priv.virq); vuart_bus_priv.virq = NO_IRQ; fail_alloc_irq: --vuart_bus_priv.use_count; @@ -975,7 +975,7 @@ static int ps3_vuart_remove(struct device *_dev) if (--vuart_bus_priv.use_count == 0) { BUG(); free_irq(vuart_bus_priv.virq, &vuart_bus_priv); - ps3_free_vuart_irq(vuart_bus_priv.virq); + ps3_vuart_irq_destroy(vuart_bus_priv.virq); vuart_bus_priv.virq = NO_IRQ; } diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index ef1eae98ba44..5e439836db2d 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -21,21 +21,31 @@ config RTC_CLASS will be called rtc-class. config RTC_HCTOSYS - bool "Set system time from RTC on startup" + bool "Set system time from RTC on startup and resume" depends on RTC_CLASS = y default y help - If you say yes here, the system time will be set using - the value read from the specified RTC device. This is useful - in order to avoid unnecessary fsck runs. + If you say yes here, the system time (wall clock) will be set using + the value read from a specified RTC device. This is useful to avoid + unnecessary fsck runs at boot time, and to network better. config RTC_HCTOSYS_DEVICE - string "The RTC to read the time from" + string "RTC used to set the system time" depends on RTC_HCTOSYS = y default "rtc0" help - The RTC device that will be used as the source for - the system time, usually rtc0. + The RTC device that will be used to (re)initialize the system + clock, usually rtc0. Initialization is done when the system + starts up, and when it resumes from a low power state. + + This clock should be battery-backed, so that it reads the correct + time when the system boots from a power-off state. Otherwise, your + system will need an external clock source (like an NTP server). + + If the clock you specify here is not battery backed, it may still + be useful to reinitialize system time when resuming from system + sleep states. Do not specify an RTC here unless it stays powered + during all this system's supported sleep states. config RTC_DEBUG bool "RTC debug support" @@ -48,7 +58,7 @@ comment "RTC interfaces" depends on RTC_CLASS config RTC_INTF_SYSFS - tristate "sysfs" + boolean "sysfs" depends on RTC_CLASS && SYSFS default RTC_CLASS help @@ -59,7 +69,7 @@ config RTC_INTF_SYSFS will be called rtc-sysfs. config RTC_INTF_PROC - tristate "proc" + boolean "proc" depends on RTC_CLASS && PROC_FS default RTC_CLASS help @@ -71,7 +81,7 @@ config RTC_INTF_PROC will be called rtc-proc. config RTC_INTF_DEV - tristate "dev" + boolean "dev" depends on RTC_CLASS default RTC_CLASS help @@ -92,44 +102,26 @@ config RTC_INTF_DEV_UIE_EMUL driver does not expose RTC_UIE ioctls. Those requests generate once-per-second update interrupts, used for synchronization. -comment "RTC drivers" +config RTC_DRV_TEST + tristate "Test driver/device" depends on RTC_CLASS - -# this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h> -# requires <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a -# global rtc_lock ... it's not yet just another platform_device. - -config RTC_DRV_CMOS - tristate "PC-style 'CMOS' real time clock" - depends on RTC_CLASS && (X86 || ALPHA || ARM26 || ARM \ - || M32R || ATARI || POWERPC) - help - Say "yes" here to get direct support for the real time clock - found in every PC or ACPI-based system, and some other boards. - Specifically the original MC146818, compatibles like those in - PC south bridges, the DS12887 or M48T86, some multifunction - or LPC bus chips, and so on. - - Your system will need to define the platform device used by - this driver, otherwise it won't be accessible. This means - you can safely enable this driver if you don't know whether - or not your board has this kind of hardware. - - This driver can also be built as a module. If so, the module - will be called rtc-cmos. - -config RTC_DRV_X1205 - tristate "Xicor/Intersil X1205" - depends on RTC_CLASS && I2C help If you say yes here you get support for the - Xicor/Intersil X1205 RTC chip. + RTC test driver. It's a software RTC which can be + used to test the RTC subsystem APIs. It gets + the time from the system clock. + You want this driver only if you are doing development + on the RTC subsystem. Please read the source code + for further details. This driver can also be built as a module. If so, the module - will be called rtc-x1205. + will be called rtc-test. + +comment "I2C RTC drivers" + depends on RTC_CLASS config RTC_DRV_DS1307 - tristate "Dallas/Maxim DS1307 and similar I2C RTC chips" + tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00" depends on RTC_CLASS && I2C help If you say yes here you get support for various compatible RTC @@ -146,53 +138,55 @@ config RTC_DRV_DS1307 This driver can also be built as a module. If so, the module will be called rtc-ds1307. -config RTC_DRV_DS1553 - tristate "Dallas DS1553" - depends on RTC_CLASS +config RTC_DRV_DS1672 + tristate "Dallas/Maxim DS1672" + depends on RTC_CLASS && I2C help If you say yes here you get support for the - Dallas DS1553 timekeeping chip. + Dallas/Maxim DS1672 timekeeping chip. This driver can also be built as a module. If so, the module - will be called rtc-ds1553. + will be called rtc-ds1672. -config RTC_DRV_ISL1208 - tristate "Intersil 1208" +config RTC_DRV_MAX6900 + tristate "Maxim 6900" depends on RTC_CLASS && I2C help - If you say yes here you get support for the - Intersil 1208 RTC chip. + If you say yes here you will get support for the + Maxim MAX6900 I2C RTC chip. This driver can also be built as a module. If so, the module - will be called rtc-isl1208. + will be called rtc-max6900. -config RTC_DRV_DS1672 - tristate "Dallas/Maxim DS1672" +config RTC_DRV_RS5C372 + tristate "Ricoh RS5C372A/B" depends on RTC_CLASS && I2C help If you say yes here you get support for the - Dallas/Maxim DS1672 timekeeping chip. + Ricoh RS5C372A and RS5C372B RTC chips. This driver can also be built as a module. If so, the module - will be called rtc-ds1672. + will be called rtc-rs5c372. -config RTC_DRV_DS1742 - tristate "Dallas DS1742/1743" - depends on RTC_CLASS +config RTC_DRV_ISL1208 + tristate "Intersil 1208" + depends on RTC_CLASS && I2C help If you say yes here you get support for the - Dallas DS1742/1743 timekeeping chip. + Intersil 1208 RTC chip. This driver can also be built as a module. If so, the module - will be called rtc-ds1742. + will be called rtc-isl1208. -config RTC_DRV_OMAP - tristate "TI OMAP1" - depends on RTC_CLASS && ( \ - ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 ) +config RTC_DRV_X1205 + tristate "Xicor/Intersil X1205" + depends on RTC_CLASS && I2C help - Say "yes" here to support the real time clock on TI OMAP1 chips. - This driver can also be built as a module called rtc-omap. + If you say yes here you get support for the + Xicor/Intersil X1205 RTC chip. + + This driver can also be built as a module. If so, the module + will be called rtc-x1205. config RTC_DRV_PCF8563 tristate "Philips PCF8563/Epson RTC8564" @@ -207,16 +201,20 @@ config RTC_DRV_PCF8563 config RTC_DRV_PCF8583 tristate "Philips PCF8583" - depends on RTC_CLASS && I2C && ARCH_RPC + depends on RTC_CLASS && I2C help If you say yes here you get support for the Philips PCF8583 - RTC chip found on Acorn RiscPCs. This driver supports the + RTC chip found on Acorn RiscPCs. This driver supports the platform specific method of retrieving the current year from - the RTC's SRAM. + the RTC's SRAM. It will work on other platforms with the same + chip, but the year will probably have to be tweaked. This driver can also be built as a module. If so, the module will be called rtc-pcf8583. +comment "SPI RTC drivers" + depends on RTC_CLASS + config RTC_DRV_RS5C348 tristate "Ricoh RS5C348A/B" depends on RTC_CLASS && SPI @@ -227,15 +225,92 @@ config RTC_DRV_RS5C348 This driver can also be built as a module. If so, the module will be called rtc-rs5c348. -config RTC_DRV_RS5C372 - tristate "Ricoh RS5C372A/B" - depends on RTC_CLASS && I2C +config RTC_DRV_MAX6902 + tristate "Maxim 6902" + depends on RTC_CLASS && SPI + help + If you say yes here you will get support for the + Maxim MAX6902 SPI RTC chip. + + This driver can also be built as a module. If so, the module + will be called rtc-max6902. + +comment "Platform RTC drivers" + depends on RTC_CLASS + +# this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h> +# requires <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a +# global rtc_lock ... it's not yet just another platform_device. + +config RTC_DRV_CMOS + tristate "PC-style 'CMOS'" + depends on RTC_CLASS && (X86 || ALPHA || ARM26 || ARM \ + || M32R || ATARI || POWERPC) + help + Say "yes" here to get direct support for the real time clock + found in every PC or ACPI-based system, and some other boards. + Specifically the original MC146818, compatibles like those in + PC south bridges, the DS12887 or M48T86, some multifunction + or LPC bus chips, and so on. + + Your system will need to define the platform device used by + this driver, otherwise it won't be accessible. This means + you can safely enable this driver if you don't know whether + or not your board has this kind of hardware. + + This driver can also be built as a module. If so, the module + will be called rtc-cmos. + +config RTC_DRV_DS1553 + tristate "Dallas DS1553" + depends on RTC_CLASS help If you say yes here you get support for the - Ricoh RS5C372A and RS5C372B RTC chips. + Dallas DS1553 timekeeping chip. This driver can also be built as a module. If so, the module - will be called rtc-rs5c372. + will be called rtc-ds1553. + +config RTC_DRV_DS1742 + tristate "Dallas DS1742/1743" + depends on RTC_CLASS + help + If you say yes here you get support for the + Dallas DS1742/1743 timekeeping chip. + + This driver can also be built as a module. If so, the module + will be called rtc-ds1742. + +config RTC_DRV_M48T86 + tristate "ST M48T86/Dallas DS12887" + depends on RTC_CLASS + help + If you say Y here you will get support for the + ST M48T86 and Dallas DS12887 RTC chips. + + This driver can also be built as a module. If so, the module + will be called rtc-m48t86. + +config RTC_DRV_V3020 + tristate "EM Microelectronic V3020" + depends on RTC_CLASS + help + If you say yes here you will get support for the + EM Microelectronic v3020 RTC chip. + + This driver can also be built as a module. If so, the module + will be called rtc-v3020. + +comment "on-CPU RTC drivers" + depends on RTC_CLASS + +config RTC_DRV_OMAP + tristate "TI OMAP1" + depends on RTC_CLASS && ( \ + ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 ) + help + Say "yes" here to support the real time clock on TI OMAP1 chips. + This driver can also be built as a module called rtc-omap. config RTC_DRV_S3C tristate "Samsung S3C series SoC RTC" @@ -253,16 +328,6 @@ config RTC_DRV_S3C This driver can also be build as a module. If so, the module will be called rtc-s3c. -config RTC_DRV_M48T86 - tristate "ST M48T86/Dallas DS12887" - depends on RTC_CLASS - help - If you say Y here you will get support for the - ST M48T86 and Dallas DS12887 RTC chips. - - This driver can also be built as a module. If so, the module - will be called rtc-m48t86. - config RTC_DRV_EP93XX tristate "Cirrus Logic EP93XX" depends on RTC_CLASS && ARCH_EP93XX @@ -308,7 +373,7 @@ config RTC_DRV_PL031 depends on RTC_CLASS && ARM_AMBA help If you say Y here you will get access to ARM AMBA - PrimeCell PL031 UART found on certain ARM SOCs. + PrimeCell PL031 RTC found on certain ARM SOCs. To compile this driver as a module, choose M here: the module will be called rtc-pl031. @@ -319,41 +384,6 @@ config RTC_DRV_AT91RM9200 help Driver for the Atmel AT91RM9200's internal RTC (Realtime Clock). -config RTC_DRV_TEST - tristate "Test driver/device" - depends on RTC_CLASS - help - If you say yes here you get support for the - RTC test driver. It's a software RTC which can be - used to test the RTC subsystem APIs. It gets - the time from the system clock. - You want this driver only if you are doing development - on the RTC subsystem. Please read the source code - for further details. - - This driver can also be built as a module. If so, the module - will be called rtc-test. - -config RTC_DRV_MAX6902 - tristate "Maxim 6902" - depends on RTC_CLASS && SPI - help - If you say yes here you will get support for the - Maxim MAX6902 spi RTC chip. - - This driver can also be built as a module. If so, the module - will be called rtc-max6902. - -config RTC_DRV_V3020 - tristate "EM Microelectronic V3020" - depends on RTC_CLASS - help - If you say yes here you will get support for the - EM Microelectronic v3020 RTC chip. - - This driver can also be built as a module. If so, the module - will be called rtc-v3020. - config RTC_DRV_BFIN tristate "Blackfin On-Chip RTC" depends on RTC_CLASS && BFIN @@ -364,4 +394,10 @@ config RTC_DRV_BFIN This driver can also be built as a module. If so, the module will be called rtc-bfin. +config RTC_DRV_RS5C313 + tristate "Ricoh RS5C313" + depends on RTC_CLASS && BROKEN + help + If you say yes here you get support for the Ricoh RS5C313 RTC chips. + endmenu diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 9218cf28d6ed..a1afbc236073 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -11,9 +11,9 @@ obj-$(CONFIG_RTC_HCTOSYS) += hctosys.o obj-$(CONFIG_RTC_CLASS) += rtc-core.o rtc-core-y := class.o interface.o -obj-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o -obj-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o -obj-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o +rtc-core-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o +rtc-core-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o +rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o @@ -30,10 +30,12 @@ obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o +obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o +obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c index 04aaa6347234..8b3cd31d6a61 100644 --- a/drivers/rtc/class.c +++ b/drivers/rtc/class.c @@ -16,19 +16,94 @@ #include <linux/kdev_t.h> #include <linux/idr.h> +#include "rtc-core.h" + + static DEFINE_IDR(rtc_idr); static DEFINE_MUTEX(idr_lock); struct class *rtc_class; -static void rtc_device_release(struct class_device *class_dev) +static void rtc_device_release(struct device *dev) { - struct rtc_device *rtc = to_rtc_device(class_dev); + struct rtc_device *rtc = to_rtc_device(dev); mutex_lock(&idr_lock); idr_remove(&rtc_idr, rtc->id); mutex_unlock(&idr_lock); kfree(rtc); } +#if defined(CONFIG_PM) && defined(CONFIG_RTC_HCTOSYS_DEVICE) + +/* + * On suspend(), measure the delta between one RTC and the + * system's wall clock; restore it on resume(). + */ + +static struct timespec delta; +static time_t oldtime; + +static int rtc_suspend(struct device *dev, pm_message_t mesg) +{ + struct rtc_device *rtc = to_rtc_device(dev); + struct rtc_time tm; + + if (strncmp(rtc->dev.bus_id, + CONFIG_RTC_HCTOSYS_DEVICE, + BUS_ID_SIZE) != 0) + return 0; + + rtc_read_time(rtc, &tm); + rtc_tm_to_time(&tm, &oldtime); + + /* RTC precision is 1 second; adjust delta for avg 1/2 sec err */ + set_normalized_timespec(&delta, + xtime.tv_sec - oldtime, + xtime.tv_nsec - (NSEC_PER_SEC >> 1)); + + return 0; +} + +static int rtc_resume(struct device *dev) +{ + struct rtc_device *rtc = to_rtc_device(dev); + struct rtc_time tm; + time_t newtime; + struct timespec time; + + if (strncmp(rtc->dev.bus_id, + CONFIG_RTC_HCTOSYS_DEVICE, + BUS_ID_SIZE) != 0) + return 0; + + rtc_read_time(rtc, &tm); + if (rtc_valid_tm(&tm) != 0) { + pr_debug("%s: bogus resume time\n", rtc->dev.bus_id); + return 0; + } + rtc_tm_to_time(&tm, &newtime); + if (newtime <= oldtime) { + if (newtime < oldtime) + pr_debug("%s: time travel!\n", rtc->dev.bus_id); + return 0; + } + + /* restore wall clock using delta against this RTC; + * adjust again for avg 1/2 second RTC sampling error + */ + set_normalized_timespec(&time, + newtime + delta.tv_sec, + (NSEC_PER_SEC >> 1) + delta.tv_nsec); + do_settimeofday(&time); + + return 0; +} + +#else +#define rtc_suspend NULL +#define rtc_resume NULL +#endif + + /** * rtc_device_register - register w/ RTC class * @dev: the device to register @@ -70,23 +145,29 @@ struct rtc_device *rtc_device_register(const char *name, struct device *dev, rtc->ops = ops; rtc->owner = owner; rtc->max_user_freq = 64; - rtc->class_dev.dev = dev; - rtc->class_dev.class = rtc_class; - rtc->class_dev.release = rtc_device_release; + rtc->dev.parent = dev; + rtc->dev.class = rtc_class; + rtc->dev.release = rtc_device_release; mutex_init(&rtc->ops_lock); spin_lock_init(&rtc->irq_lock); spin_lock_init(&rtc->irq_task_lock); strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE); - snprintf(rtc->class_dev.class_id, BUS_ID_SIZE, "rtc%d", id); + snprintf(rtc->dev.bus_id, BUS_ID_SIZE, "rtc%d", id); - err = class_device_register(&rtc->class_dev); + rtc_dev_prepare(rtc); + + err = device_register(&rtc->dev); if (err) goto exit_kfree; + rtc_dev_add_device(rtc); + rtc_sysfs_add_device(rtc); + rtc_proc_add_device(rtc); + dev_info(dev, "rtc core: registered %s as %s\n", - rtc->name, rtc->class_dev.class_id); + rtc->name, rtc->dev.bus_id); return rtc; @@ -113,26 +194,22 @@ EXPORT_SYMBOL_GPL(rtc_device_register); */ void rtc_device_unregister(struct rtc_device *rtc) { - if (class_device_get(&rtc->class_dev) != NULL) { + if (get_device(&rtc->dev) != NULL) { mutex_lock(&rtc->ops_lock); /* remove innards of this RTC, then disable it, before * letting any rtc_class_open() users access it again */ - class_device_unregister(&rtc->class_dev); + rtc_sysfs_del_device(rtc); + rtc_dev_del_device(rtc); + rtc_proc_del_device(rtc); + device_unregister(&rtc->dev); rtc->ops = NULL; mutex_unlock(&rtc->ops_lock); - class_device_put(&rtc->class_dev); + put_device(&rtc->dev); } } EXPORT_SYMBOL_GPL(rtc_device_unregister); -int rtc_interface_register(struct class_interface *intf) -{ - intf->class = rtc_class; - return class_interface_register(intf); -} -EXPORT_SYMBOL_GPL(rtc_interface_register); - static int __init rtc_init(void) { rtc_class = class_create(THIS_MODULE, "rtc"); @@ -140,11 +217,16 @@ static int __init rtc_init(void) printk(KERN_ERR "%s: couldn't create class\n", __FILE__); return PTR_ERR(rtc_class); } + rtc_class->suspend = rtc_suspend; + rtc_class->resume = rtc_resume; + rtc_dev_init(); + rtc_sysfs_init(rtc_class); return 0; } static void __exit rtc_exit(void) { + rtc_dev_exit(); class_destroy(rtc_class); } diff --git a/drivers/rtc/hctosys.c b/drivers/rtc/hctosys.c index d02fe9a0001f..178527252c6a 100644 --- a/drivers/rtc/hctosys.c +++ b/drivers/rtc/hctosys.c @@ -26,15 +26,15 @@ static int __init rtc_hctosys(void) { int err; struct rtc_time tm; - struct class_device *class_dev = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); + struct rtc_device *rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); - if (class_dev == NULL) { + if (rtc == NULL) { printk("%s: unable to open rtc device (%s)\n", __FILE__, CONFIG_RTC_HCTOSYS_DEVICE); return -ENODEV; } - err = rtc_read_time(class_dev, &tm); + err = rtc_read_time(rtc, &tm); if (err == 0) { err = rtc_valid_tm(&tm); if (err == 0) { @@ -46,7 +46,7 @@ static int __init rtc_hctosys(void) do_settimeofday(&tv); - dev_info(class_dev->dev, + dev_info(rtc->dev.parent, "setting the system clock to " "%d-%02d-%02d %02d:%02d:%02d (%u)\n", tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, @@ -54,14 +54,14 @@ static int __init rtc_hctosys(void) (unsigned int) tv.tv_sec); } else - dev_err(class_dev->dev, + dev_err(rtc->dev.parent, "hctosys: invalid date/time\n"); } else - dev_err(class_dev->dev, + dev_err(rtc->dev.parent, "hctosys: unable to read the hardware clock\n"); - rtc_class_close(class_dev); + rtc_class_close(rtc); return 0; } diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index ef40df0f169d..ad66c6ecf365 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -13,10 +13,9 @@ #include <linux/rtc.h> -int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm) +int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm) { int err; - struct rtc_device *rtc = to_rtc_device(class_dev); err = mutex_lock_interruptible(&rtc->ops_lock); if (err) @@ -28,7 +27,7 @@ int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm) err = -EINVAL; else { memset(tm, 0, sizeof(struct rtc_time)); - err = rtc->ops->read_time(class_dev->dev, tm); + err = rtc->ops->read_time(rtc->dev.parent, tm); } mutex_unlock(&rtc->ops_lock); @@ -36,10 +35,9 @@ int rtc_read_time(struct class_device *class_dev, struct rtc_time *tm) } EXPORT_SYMBOL_GPL(rtc_read_time); -int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm) +int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm) { int err; - struct rtc_device *rtc = to_rtc_device(class_dev); err = rtc_valid_tm(tm); if (err != 0) @@ -54,17 +52,16 @@ int rtc_set_time(struct class_device *class_dev, struct rtc_time *tm) else if (!rtc->ops->set_time) err = -EINVAL; else - err = rtc->ops->set_time(class_dev->dev, tm); + err = rtc->ops->set_time(rtc->dev.parent, tm); mutex_unlock(&rtc->ops_lock); return err; } EXPORT_SYMBOL_GPL(rtc_set_time); -int rtc_set_mmss(struct class_device *class_dev, unsigned long secs) +int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs) { int err; - struct rtc_device *rtc = to_rtc_device(class_dev); err = mutex_lock_interruptible(&rtc->ops_lock); if (err) @@ -73,11 +70,11 @@ int rtc_set_mmss(struct class_device *class_dev, unsigned long secs) if (!rtc->ops) err = -ENODEV; else if (rtc->ops->set_mmss) - err = rtc->ops->set_mmss(class_dev->dev, secs); + err = rtc->ops->set_mmss(rtc->dev.parent, secs); else if (rtc->ops->read_time && rtc->ops->set_time) { struct rtc_time new, old; - err = rtc->ops->read_time(class_dev->dev, &old); + err = rtc->ops->read_time(rtc->dev.parent, &old); if (err == 0) { rtc_time_to_tm(secs, &new); @@ -89,7 +86,8 @@ int rtc_set_mmss(struct class_device *class_dev, unsigned long secs) */ if (!((old.tm_hour == 23 && old.tm_min == 59) || (new.tm_hour == 23 && new.tm_min == 59))) - err = rtc->ops->set_time(class_dev->dev, &new); + err = rtc->ops->set_time(rtc->dev.parent, + &new); } } else @@ -101,10 +99,9 @@ int rtc_set_mmss(struct class_device *class_dev, unsigned long secs) } EXPORT_SYMBOL_GPL(rtc_set_mmss); -int rtc_read_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm) +int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) { int err; - struct rtc_device *rtc = to_rtc_device(class_dev); err = mutex_lock_interruptible(&rtc->ops_lock); if (err) @@ -116,7 +113,7 @@ int rtc_read_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm) err = -EINVAL; else { memset(alarm, 0, sizeof(struct rtc_wkalrm)); - err = rtc->ops->read_alarm(class_dev->dev, alarm); + err = rtc->ops->read_alarm(rtc->dev.parent, alarm); } mutex_unlock(&rtc->ops_lock); @@ -124,10 +121,13 @@ int rtc_read_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm) } EXPORT_SYMBOL_GPL(rtc_read_alarm); -int rtc_set_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm) +int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) { int err; - struct rtc_device *rtc = to_rtc_device(class_dev); + + err = rtc_valid_tm(&alarm->time); + if (err != 0) + return err; err = mutex_lock_interruptible(&rtc->ops_lock); if (err) @@ -138,7 +138,7 @@ int rtc_set_alarm(struct class_device *class_dev, struct rtc_wkalrm *alarm) else if (!rtc->ops->set_alarm) err = -EINVAL; else - err = rtc->ops->set_alarm(class_dev->dev, alarm); + err = rtc->ops->set_alarm(rtc->dev.parent, alarm); mutex_unlock(&rtc->ops_lock); return err; @@ -147,16 +147,14 @@ EXPORT_SYMBOL_GPL(rtc_set_alarm); /** * rtc_update_irq - report RTC periodic, alarm, and/or update irqs - * @class_dev: the rtc's class device + * @rtc: the rtc device * @num: how many irqs are being reported (usually one) * @events: mask of RTC_IRQF with one or more of RTC_PF, RTC_AF, RTC_UF * Context: in_interrupt(), irqs blocked */ -void rtc_update_irq(struct class_device *class_dev, +void rtc_update_irq(struct rtc_device *rtc, unsigned long num, unsigned long events) { - struct rtc_device *rtc = to_rtc_device(class_dev); - spin_lock(&rtc->irq_lock); rtc->irq_data = (rtc->irq_data + (num << 8)) | events; spin_unlock(&rtc->irq_lock); @@ -171,40 +169,43 @@ void rtc_update_irq(struct class_device *class_dev, } EXPORT_SYMBOL_GPL(rtc_update_irq); -struct class_device *rtc_class_open(char *name) +struct rtc_device *rtc_class_open(char *name) { - struct class_device *class_dev = NULL, - *class_dev_tmp; + struct device *dev; + struct rtc_device *rtc = NULL; down(&rtc_class->sem); - list_for_each_entry(class_dev_tmp, &rtc_class->children, node) { - if (strncmp(class_dev_tmp->class_id, name, BUS_ID_SIZE) == 0) { - class_dev = class_device_get(class_dev_tmp); + list_for_each_entry(dev, &rtc_class->devices, node) { + if (strncmp(dev->bus_id, name, BUS_ID_SIZE) == 0) { + dev = get_device(dev); + if (dev) + rtc = to_rtc_device(dev); break; } } - if (class_dev) { - if (!try_module_get(to_rtc_device(class_dev)->owner)) - class_dev = NULL; + if (rtc) { + if (!try_module_get(rtc->owner)) { + put_device(dev); + rtc = NULL; + } } up(&rtc_class->sem); - return class_dev; + return rtc; } EXPORT_SYMBOL_GPL(rtc_class_open); -void rtc_class_close(struct class_device *class_dev) +void rtc_class_close(struct rtc_device *rtc) { - module_put(to_rtc_device(class_dev)->owner); - class_device_put(class_dev); + module_put(rtc->owner); + put_device(&rtc->dev); } EXPORT_SYMBOL_GPL(rtc_class_close); -int rtc_irq_register(struct class_device *class_dev, struct rtc_task *task) +int rtc_irq_register(struct rtc_device *rtc, struct rtc_task *task) { int retval = -EBUSY; - struct rtc_device *rtc = to_rtc_device(class_dev); if (task == NULL || task->func == NULL) return -EINVAL; @@ -220,9 +221,8 @@ int rtc_irq_register(struct class_device *class_dev, struct rtc_task *task) } EXPORT_SYMBOL_GPL(rtc_irq_register); -void rtc_irq_unregister(struct class_device *class_dev, struct rtc_task *task) +void rtc_irq_unregister(struct rtc_device *rtc, struct rtc_task *task) { - struct rtc_device *rtc = to_rtc_device(class_dev); spin_lock_irq(&rtc->irq_task_lock); if (rtc->irq_task == task) @@ -231,11 +231,10 @@ void rtc_irq_unregister(struct class_device *class_dev, struct rtc_task *task) } EXPORT_SYMBOL_GPL(rtc_irq_unregister); -int rtc_irq_set_state(struct class_device *class_dev, struct rtc_task *task, int enabled) +int rtc_irq_set_state(struct rtc_device *rtc, struct rtc_task *task, int enabled) { int err = 0; unsigned long flags; - struct rtc_device *rtc = to_rtc_device(class_dev); if (rtc->ops->irq_set_state == NULL) return -ENXIO; @@ -246,17 +245,16 @@ int rtc_irq_set_state(struct class_device *class_dev, struct rtc_task *task, int spin_unlock_irqrestore(&rtc->irq_task_lock, flags); if (err == 0) - err = rtc->ops->irq_set_state(class_dev->dev, enabled); + err = rtc->ops->irq_set_state(rtc->dev.parent, enabled); return err; } EXPORT_SYMBOL_GPL(rtc_irq_set_state); -int rtc_irq_set_freq(struct class_device *class_dev, struct rtc_task *task, int freq) +int rtc_irq_set_freq(struct rtc_device *rtc, struct rtc_task *task, int freq) { int err = 0; unsigned long flags; - struct rtc_device *rtc = to_rtc_device(class_dev); if (rtc->ops->irq_set_freq == NULL) return -ENXIO; @@ -267,7 +265,7 @@ int rtc_irq_set_freq(struct class_device *class_dev, struct rtc_task *task, int spin_unlock_irqrestore(&rtc->irq_task_lock, flags); if (err == 0) { - err = rtc->ops->irq_set_freq(class_dev->dev, freq); + err = rtc->ops->irq_set_freq(rtc->dev.parent, freq); if (err == 0) rtc->irq_freq = freq; } diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index ac0e68e2f025..33795e5a5595 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -263,7 +263,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id) at91_sys_write(AT91_RTC_SCCR, rtsr); /* clear status reg */ - rtc_update_irq(&rtc->class_dev, 1, events); + rtc_update_irq(rtc, 1, events); pr_debug("%s(): num=%ld, events=0x%02lx\n", __FUNCTION__, events >> 8, events & 0x000000FF); @@ -348,21 +348,10 @@ static int __exit at91_rtc_remove(struct platform_device *pdev) /* AT91RM9200 RTC Power management control */ -static struct timespec at91_rtc_delta; static u32 at91_rtc_imr; static int at91_rtc_suspend(struct platform_device *pdev, pm_message_t state) { - struct rtc_time tm; - struct timespec time; - - time.tv_nsec = 0; - - /* calculate time delta for suspend */ - at91_rtc_readtime(&pdev->dev, &tm); - rtc_tm_to_time(&tm, &time.tv_sec); - save_time_delta(&at91_rtc_delta, &time); - /* this IRQ is shared with DBGU and other hardware which isn't * necessarily doing PM like we are... */ @@ -374,36 +363,17 @@ static int at91_rtc_suspend(struct platform_device *pdev, pm_message_t state) else at91_sys_write(AT91_RTC_IDR, at91_rtc_imr); } - - pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__, - 1900 + tm.tm_year, tm.tm_mon, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); - return 0; } static int at91_rtc_resume(struct platform_device *pdev) { - struct rtc_time tm; - struct timespec time; - - time.tv_nsec = 0; - - at91_rtc_readtime(&pdev->dev, &tm); - rtc_tm_to_time(&tm, &time.tv_sec); - restore_time_delta(&at91_rtc_delta, &time); - if (at91_rtc_imr) { if (device_may_wakeup(&pdev->dev)) disable_irq_wake(AT91_ID_SYS); else at91_sys_write(AT91_RTC_IER, at91_rtc_imr); } - - pr_debug("%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __FUNCTION__, - 1900 + tm.tm_year, tm.tm_mon, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); - return 0; } #else diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 7c0d60910077..6085261aa2c1 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -46,6 +46,10 @@ struct cmos_rtc { int irq; struct resource *iomem; + void (*wake_on)(struct device *); + void (*wake_off)(struct device *); + + u8 enabled_wake; u8 suspend_ctrl; /* newer hardware extends the original register set */ @@ -203,7 +207,7 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) rtc_intr = CMOS_READ(RTC_INTR_FLAGS); rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; if (is_intr(rtc_intr)) - rtc_update_irq(&cmos->rtc->class_dev, 1, rtc_intr); + rtc_update_irq(cmos->rtc, 1, rtc_intr); /* update alarm */ CMOS_WRITE(hrs, RTC_HOURS_ALARM); @@ -223,7 +227,7 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) rtc_intr = CMOS_READ(RTC_INTR_FLAGS); rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; if (is_intr(rtc_intr)) - rtc_update_irq(&cmos->rtc->class_dev, 1, rtc_intr); + rtc_update_irq(cmos->rtc, 1, rtc_intr); } spin_unlock_irq(&rtc_lock); @@ -304,7 +308,7 @@ cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) rtc_intr = CMOS_READ(RTC_INTR_FLAGS); rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; if (is_intr(rtc_intr)) - rtc_update_irq(&cmos->rtc->class_dev, 1, rtc_intr); + rtc_update_irq(cmos->rtc, 1, rtc_intr); spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -379,12 +383,12 @@ static irqreturn_t cmos_interrupt(int irq, void *p) return IRQ_NONE; } -#ifdef CONFIG_PNPACPI -#define is_pnpacpi() 1 +#ifdef CONFIG_PNP +#define is_pnp() 1 #define INITSECTION #else -#define is_pnpacpi() 0 +#define is_pnp() 0 #define INITSECTION __init #endif @@ -405,13 +409,20 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) cmos_rtc.irq = rtc_irq; cmos_rtc.iomem = ports; - /* For ACPI systems the info comes from the FADT. On others, - * board specific setup provides it as appropriate. + /* For ACPI systems extension info comes from the FADT. On others, + * board specific setup provides it as appropriate. Systems where + * the alarm IRQ isn't automatically a wakeup IRQ (like ACPI, and + * some almost-clones) can provide hooks to make that behave. */ if (info) { cmos_rtc.day_alrm = info->rtc_day_alarm; cmos_rtc.mon_alrm = info->rtc_mon_alarm; cmos_rtc.century = info->rtc_century; + + if (info->wake_on && info->wake_off) { + cmos_rtc.wake_on = info->wake_on; + cmos_rtc.wake_off = info->wake_off; + } } cmos_rtc.rtc = rtc_device_register(driver_name, dev, @@ -427,14 +438,14 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) * REVISIT for non-x86 systems we may need to handle io memory * resources: ioremap them, and request_mem_region(). */ - if (is_pnpacpi()) { + if (is_pnp()) { retval = request_resource(&ioport_resource, ports); if (retval < 0) { dev_dbg(dev, "i/o registers already in use\n"); goto cleanup0; } } - rename_region(ports, cmos_rtc.rtc->class_dev.class_id); + rename_region(ports, cmos_rtc.rtc->dev.bus_id); spin_lock_irq(&rtc_lock); @@ -470,8 +481,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) if (is_valid_irq(rtc_irq)) retval = request_irq(rtc_irq, cmos_interrupt, IRQF_DISABLED, - cmos_rtc.rtc->class_dev.class_id, - &cmos_rtc.rtc->class_dev); + cmos_rtc.rtc->dev.bus_id, + cmos_rtc.rtc); if (retval < 0) { dev_dbg(dev, "IRQ %d is already in use\n", rtc_irq); goto cleanup1; @@ -483,7 +494,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) */ pr_info("%s: alarms up to one %s%s\n", - cmos_rtc.rtc->class_dev.class_id, + cmos_rtc.rtc->dev.bus_id, is_valid_irq(rtc_irq) ? (cmos_rtc.mon_alrm ? "year" @@ -520,12 +531,12 @@ static void __exit cmos_do_remove(struct device *dev) cmos_do_shutdown(); - if (is_pnpacpi()) + if (is_pnp()) release_resource(cmos->iomem); rename_region(cmos->iomem, NULL); if (is_valid_irq(cmos->irq)) - free_irq(cmos->irq, &cmos_rtc.rtc->class_dev); + free_irq(cmos->irq, cmos_rtc.rtc); rtc_device_unregister(cmos_rtc.rtc); @@ -555,16 +566,20 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg) irqstat = CMOS_READ(RTC_INTR_FLAGS); irqstat &= (tmp & RTC_IRQMASK) | RTC_IRQF; if (is_intr(irqstat)) - rtc_update_irq(&cmos->rtc->class_dev, 1, irqstat); + rtc_update_irq(cmos->rtc, 1, irqstat); } spin_unlock_irq(&rtc_lock); - /* ACPI HOOK: enable ACPI_EVENT_RTC when (tmp & RTC_AIE) - * ... it'd be best if we could do that under rtc_lock. - */ + if (tmp & RTC_AIE) { + cmos->enabled_wake = 1; + if (cmos->wake_on) + cmos->wake_on(dev); + else + enable_irq_wake(cmos->irq); + } pr_debug("%s: suspend%s, ctrl %02x\n", - cmos_rtc.rtc->class_dev.class_id, + cmos_rtc.rtc->dev.bus_id, (tmp & RTC_AIE) ? ", alarm may wake" : "", tmp); @@ -576,26 +591,28 @@ static int cmos_resume(struct device *dev) struct cmos_rtc *cmos = dev_get_drvdata(dev); unsigned char tmp = cmos->suspend_ctrl; - /* REVISIT: a mechanism to resync the system clock (jiffies) - * on resume should be portable between platforms ... - */ - /* re-enable any irqs previously active */ if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) { - /* ACPI HOOK: disable ACPI_EVENT_RTC when (tmp & RTC_AIE) */ + if (cmos->enabled_wake) { + if (cmos->wake_off) + cmos->wake_off(dev); + else + disable_irq_wake(cmos->irq); + cmos->enabled_wake = 0; + } spin_lock_irq(&rtc_lock); CMOS_WRITE(tmp, RTC_CONTROL); tmp = CMOS_READ(RTC_INTR_FLAGS); tmp &= (cmos->suspend_ctrl & RTC_IRQMASK) | RTC_IRQF; if (is_intr(tmp)) - rtc_update_irq(&cmos->rtc->class_dev, 1, tmp); + rtc_update_irq(cmos->rtc, 1, tmp); spin_unlock_irq(&rtc_lock); } pr_debug("%s: resume, ctrl %02x\n", - cmos_rtc.rtc->class_dev.class_id, + cmos_rtc.rtc->dev.bus_id, cmos->suspend_ctrl); @@ -613,7 +630,7 @@ static int cmos_resume(struct device *dev) * the device node will always be created as a PNPACPI device. */ -#ifdef CONFIG_PNPACPI +#ifdef CONFIG_PNP #include <linux/pnp.h> @@ -684,11 +701,11 @@ static void __exit cmos_exit(void) } module_exit(cmos_exit); -#else /* no PNPACPI */ +#else /* no PNP */ /*----------------------------------------------------------------*/ -/* Platform setup should have set up an RTC device, when PNPACPI is +/* Platform setup should have set up an RTC device, when PNP is * unavailable ... this could happen even on (older) PCs. */ @@ -734,7 +751,7 @@ static void __exit cmos_exit(void) module_exit(cmos_exit); -#endif /* !PNPACPI */ +#endif /* !PNP */ MODULE_AUTHOR("David Brownell"); MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs"); diff --git a/drivers/rtc/rtc-core.h b/drivers/rtc/rtc-core.h new file mode 100644 index 000000000000..5f9df7430a22 --- /dev/null +++ b/drivers/rtc/rtc-core.h @@ -0,0 +1,70 @@ +#ifdef CONFIG_RTC_INTF_DEV + +extern void __init rtc_dev_init(void); +extern void __exit rtc_dev_exit(void); +extern void rtc_dev_prepare(struct rtc_device *rtc); +extern void rtc_dev_add_device(struct rtc_device *rtc); +extern void rtc_dev_del_device(struct rtc_device *rtc); + +#else + +static inline void rtc_dev_init(void) +{ +} + +static inline void rtc_dev_exit(void) +{ +} + +static inline void rtc_dev_prepare(struct rtc_device *rtc) +{ +} + +static inline void rtc_dev_add_device(struct rtc_device *rtc) +{ +} + +static inline void rtc_dev_del_device(struct rtc_device *rtc) +{ +} + +#endif + +#ifdef CONFIG_RTC_INTF_PROC + +extern void rtc_proc_add_device(struct rtc_device *rtc); +extern void rtc_proc_del_device(struct rtc_device *rtc); + +#else + +static inline void rtc_proc_add_device(struct rtc_device *rtc) +{ +} + +static inline void rtc_proc_del_device(struct rtc_device *rtc) +{ +} + +#endif + +#ifdef CONFIG_RTC_INTF_SYSFS + +extern void __init rtc_sysfs_init(struct class *); +extern void rtc_sysfs_add_device(struct rtc_device *rtc); +extern void rtc_sysfs_del_device(struct rtc_device *rtc); + +#else + +static inline void rtc_sysfs_init(struct class *rtc) +{ +} + +static inline void rtc_sysfs_add_device(struct rtc_device *rtc) +{ +} + +static inline void rtc_sysfs_del_device(struct rtc_device *rtc) +{ +} + +#endif diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 137330b8636b..f4e5f0040ff7 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -13,8 +13,8 @@ #include <linux/module.h> #include <linux/rtc.h> +#include "rtc-core.h" -static struct class *rtc_dev_class; static dev_t rtc_devt; #define RTC_DEV_MAX 16 /* 16 RTCs should be enough for everyone... */ @@ -32,9 +32,9 @@ static int rtc_dev_open(struct inode *inode, struct file *file) if (!(mutex_trylock(&rtc->char_lock))) return -EBUSY; - file->private_data = &rtc->class_dev; + file->private_data = rtc; - err = ops->open ? ops->open(rtc->class_dev.dev) : 0; + err = ops->open ? ops->open(rtc->dev.parent) : 0; if (err == 0) { spin_lock_irq(&rtc->irq_lock); rtc->irq_data = 0; @@ -61,7 +61,7 @@ static void rtc_uie_task(struct work_struct *work) int num = 0; int err; - err = rtc_read_time(&rtc->class_dev, &tm); + err = rtc_read_time(rtc, &tm); local_irq_disable(); spin_lock(&rtc->irq_lock); @@ -79,7 +79,7 @@ static void rtc_uie_task(struct work_struct *work) } spin_unlock(&rtc->irq_lock); if (num) - rtc_update_irq(&rtc->class_dev, num, RTC_UF | RTC_IRQF); + rtc_update_irq(rtc, num, RTC_UF | RTC_IRQF); local_irq_enable(); } static void rtc_uie_timer(unsigned long data) @@ -121,7 +121,7 @@ static int set_uie(struct rtc_device *rtc) struct rtc_time tm; int err; - err = rtc_read_time(&rtc->class_dev, &tm); + err = rtc_read_time(rtc, &tm); if (err) return err; spin_lock_irq(&rtc->irq_lock); @@ -180,7 +180,7 @@ rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) if (ret == 0) { /* Check for any data updates */ if (rtc->ops->read_callback) - data = rtc->ops->read_callback(rtc->class_dev.dev, + data = rtc->ops->read_callback(rtc->dev.parent, data); if (sizeof(int) != sizeof(long) && @@ -210,8 +210,7 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { int err = 0; - struct class_device *class_dev = file->private_data; - struct rtc_device *rtc = to_rtc_device(class_dev); + struct rtc_device *rtc = file->private_data; const struct rtc_class_ops *ops = rtc->ops; struct rtc_time tm; struct rtc_wkalrm alarm; @@ -252,7 +251,7 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, /* try the driver's ioctl interface */ if (ops->ioctl) { - err = ops->ioctl(class_dev->dev, cmd, arg); + err = ops->ioctl(rtc->dev.parent, cmd, arg); if (err != -ENOIOCTLCMD) return err; } @@ -264,7 +263,7 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, switch (cmd) { case RTC_ALM_READ: - err = rtc_read_alarm(class_dev, &alarm); + err = rtc_read_alarm(rtc, &alarm); if (err < 0) return err; @@ -278,17 +277,53 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, alarm.enabled = 0; alarm.pending = 0; - alarm.time.tm_mday = -1; - alarm.time.tm_mon = -1; - alarm.time.tm_year = -1; alarm.time.tm_wday = -1; alarm.time.tm_yday = -1; alarm.time.tm_isdst = -1; - err = rtc_set_alarm(class_dev, &alarm); + + /* RTC_ALM_SET alarms may be up to 24 hours in the future. + * Rather than expecting every RTC to implement "don't care" + * for day/month/year fields, just force the alarm to have + * the right values for those fields. + * + * RTC_WKALM_SET should be used instead. Not only does it + * eliminate the need for a separate RTC_AIE_ON call, it + * doesn't have the "alarm 23:59:59 in the future" race. + * + * NOTE: some legacy code may have used invalid fields as + * wildcards, exposing hardware "periodic alarm" capabilities. + * Not supported here. + */ + { + unsigned long now, then; + + err = rtc_read_time(rtc, &tm); + if (err < 0) + return err; + rtc_tm_to_time(&tm, &now); + + alarm.time.tm_mday = tm.tm_mday; + alarm.time.tm_mon = tm.tm_mon; + alarm.time.tm_year = tm.tm_year; + err = rtc_valid_tm(&alarm.time); + if (err < 0) + return err; + rtc_tm_to_time(&alarm.time, &then); + + /* alarm may need to wrap into tomorrow */ + if (then < now) { + rtc_time_to_tm(now + 24 * 60 * 60, &tm); + alarm.time.tm_mday = tm.tm_mday; + alarm.time.tm_mon = tm.tm_mon; + alarm.time.tm_year = tm.tm_year; + } + } + + err = rtc_set_alarm(rtc, &alarm); break; case RTC_RD_TIME: - err = rtc_read_time(class_dev, &tm); + err = rtc_read_time(rtc, &tm); if (err < 0) return err; @@ -300,7 +335,7 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, if (copy_from_user(&tm, uarg, sizeof(tm))) return -EFAULT; - err = rtc_set_time(class_dev, &tm); + err = rtc_set_time(rtc, &tm); break; case RTC_IRQP_READ: @@ -310,7 +345,7 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, case RTC_IRQP_SET: if (ops->irq_set_freq) - err = rtc_irq_set_freq(class_dev, rtc->irq_task, arg); + err = rtc_irq_set_freq(rtc, rtc->irq_task, arg); break; #if 0 @@ -336,11 +371,11 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file, if (copy_from_user(&alarm, uarg, sizeof(alarm))) return -EFAULT; - err = rtc_set_alarm(class_dev, &alarm); + err = rtc_set_alarm(rtc, &alarm); break; case RTC_WKALM_RD: - err = rtc_read_alarm(class_dev, &alarm); + err = rtc_read_alarm(rtc, &alarm); if (err < 0) return err; @@ -372,7 +407,7 @@ static int rtc_dev_release(struct inode *inode, struct file *file) clear_uie(rtc); #endif if (rtc->ops->release) - rtc->ops->release(rtc->class_dev.dev); + rtc->ops->release(rtc->dev.parent); mutex_unlock(&rtc->char_lock); return 0; @@ -397,17 +432,18 @@ static const struct file_operations rtc_dev_fops = { /* insertion/removal hooks */ -static int rtc_dev_add_device(struct class_device *class_dev, - struct class_interface *class_intf) +void rtc_dev_prepare(struct rtc_device *rtc) { - int err = 0; - struct rtc_device *rtc = to_rtc_device(class_dev); + if (!rtc_devt) + return; if (rtc->id >= RTC_DEV_MAX) { - dev_err(class_dev->dev, "too many RTCs\n"); - return -EINVAL; + pr_debug("%s: too many RTC devices\n", rtc->name); + return; } + rtc->dev.devt = MKDEV(MAJOR(rtc_devt), rtc->id); + mutex_init(&rtc->char_lock); spin_lock_init(&rtc->irq_lock); init_waitqueue_head(&rtc->irq_queue); @@ -418,100 +454,36 @@ static int rtc_dev_add_device(struct class_device *class_dev, cdev_init(&rtc->char_dev, &rtc_dev_fops); rtc->char_dev.owner = rtc->owner; +} - if (cdev_add(&rtc->char_dev, MKDEV(MAJOR(rtc_devt), rtc->id), 1)) { - dev_err(class_dev->dev, - "failed to add char device %d:%d\n", +void rtc_dev_add_device(struct rtc_device *rtc) +{ + if (cdev_add(&rtc->char_dev, rtc->dev.devt, 1)) + printk(KERN_WARNING "%s: failed to add char device %d:%d\n", + rtc->name, MAJOR(rtc_devt), rtc->id); + else + pr_debug("%s: dev (%d:%d)\n", rtc->name, MAJOR(rtc_devt), rtc->id); - return -ENODEV; - } - - rtc->rtc_dev = class_device_create(rtc_dev_class, NULL, - MKDEV(MAJOR(rtc_devt), rtc->id), - class_dev->dev, "rtc%d", rtc->id); - if (IS_ERR(rtc->rtc_dev)) { - dev_err(class_dev->dev, "cannot create rtc_dev device\n"); - err = PTR_ERR(rtc->rtc_dev); - goto err_cdev_del; - } - - dev_dbg(class_dev->dev, "rtc intf: dev (%d:%d)\n", - MAJOR(rtc->rtc_dev->devt), - MINOR(rtc->rtc_dev->devt)); - - return 0; - -err_cdev_del: - - cdev_del(&rtc->char_dev); - return err; } -static void rtc_dev_remove_device(struct class_device *class_dev, - struct class_interface *class_intf) +void rtc_dev_del_device(struct rtc_device *rtc) { - struct rtc_device *rtc = to_rtc_device(class_dev); - - if (rtc->rtc_dev) { - dev_dbg(class_dev->dev, "removing char %d:%d\n", - MAJOR(rtc->rtc_dev->devt), - MINOR(rtc->rtc_dev->devt)); - - class_device_unregister(rtc->rtc_dev); + if (rtc->dev.devt) cdev_del(&rtc->char_dev); - } } -/* interface registration */ - -static struct class_interface rtc_dev_interface = { - .add = &rtc_dev_add_device, - .remove = &rtc_dev_remove_device, -}; - -static int __init rtc_dev_init(void) +void __init rtc_dev_init(void) { int err; - rtc_dev_class = class_create(THIS_MODULE, "rtc-dev"); - if (IS_ERR(rtc_dev_class)) - return PTR_ERR(rtc_dev_class); - err = alloc_chrdev_region(&rtc_devt, 0, RTC_DEV_MAX, "rtc"); - if (err < 0) { + if (err < 0) printk(KERN_ERR "%s: failed to allocate char dev region\n", __FILE__); - goto err_destroy_class; - } - - err = rtc_interface_register(&rtc_dev_interface); - if (err < 0) { - printk(KERN_ERR "%s: failed to register the interface\n", - __FILE__); - goto err_unregister_chrdev; - } - - return 0; - -err_unregister_chrdev: - unregister_chrdev_region(rtc_devt, RTC_DEV_MAX); - -err_destroy_class: - class_destroy(rtc_dev_class); - - return err; } -static void __exit rtc_dev_exit(void) +void __exit rtc_dev_exit(void) { - class_interface_unregister(&rtc_dev_interface); - class_destroy(rtc_dev_class); - unregister_chrdev_region(rtc_devt, RTC_DEV_MAX); + if (rtc_devt) + unregister_chrdev_region(rtc_devt, RTC_DEV_MAX); } - -subsys_initcall(rtc_dev_init); -module_exit(rtc_dev_exit); - -MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("RTC class dev interface"); -MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c index e27176c0e18f..afa64c7fa2e2 100644 --- a/drivers/rtc/rtc-ds1553.c +++ b/drivers/rtc/rtc-ds1553.c @@ -203,7 +203,7 @@ static irqreturn_t ds1553_rtc_interrupt(int irq, void *dev_id) events |= RTC_UF; else events |= RTC_AF; - rtc_update_irq(&pdata->rtc->class_dev, 1, events); + rtc_update_irq(pdata->rtc, 1, events); return IRQ_HANDLED; } diff --git a/drivers/rtc/rtc-lib.c b/drivers/rtc/rtc-lib.c index 7bbc26a34bd2..ba795a4db1e9 100644 --- a/drivers/rtc/rtc-lib.c +++ b/drivers/rtc/rtc-lib.c @@ -117,85 +117,4 @@ int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time) } EXPORT_SYMBOL(rtc_tm_to_time); - -/* Merge the valid (i.e. non-negative) fields of alarm into the current - * time. If the valid alarm fields are earlier than the equivalent - * fields in the time, carry one into the least significant invalid - * field, so that the alarm expiry is in the future. It assumes that the - * least significant invalid field is more significant than the most - * significant valid field, and that the seconds field is valid. - * - * This is used by alarms that take relative (rather than absolute) - * times, and/or have a simple binary second counter instead of - * day/hour/minute/sec registers. - */ -void rtc_merge_alarm(struct rtc_time *now, struct rtc_time *alarm) -{ - int *alarmp = &alarm->tm_sec; - int *timep = &now->tm_sec; - int carry_into, i; - - /* Ignore everything past the 6th element (tm_year). */ - for (i = 5; i > 0; i--) { - if (alarmp[i] < 0) - alarmp[i] = timep[i]; - else - break; - } - - /* No carry needed if all fields are valid. */ - if (i == 5) - return; - - for (carry_into = i + 1; i >= 0; i--) { - if (alarmp[i] < timep[i]) - break; - - if (alarmp[i] > timep[i]) - return; - } - - switch (carry_into) { - case 1: - alarm->tm_min++; - - if (alarm->tm_min < 60) - return; - - alarm->tm_min = 0; - /* fall-through */ - - case 2: - alarm->tm_hour++; - - if (alarm->tm_hour < 60) - return; - - alarm->tm_hour = 0; - /* fall-through */ - - case 3: - alarm->tm_mday++; - - if (alarm->tm_mday <= rtc_days_in_month[alarm->tm_mon]) - return; - - alarm->tm_mday = 1; - /* fall-through */ - - case 4: - alarm->tm_mon++; - - if (alarm->tm_mon <= 12) - return; - - alarm->tm_mon = 1; - /* fall-through */ - - case 5: - alarm->tm_year++; - } -} -EXPORT_SYMBOL(rtc_merge_alarm); - MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c new file mode 100644 index 000000000000..eee4ee5bb75a --- /dev/null +++ b/drivers/rtc/rtc-max6900.c @@ -0,0 +1,311 @@ +/* + * rtc class driver for the Maxim MAX6900 chip + * + * Author: Dale Farnsworth <dale@farnsworth.org> + * + * based on previously existing rtc class drivers + * + * 2007 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/bcd.h> +#include <linux/rtc.h> +#include <linux/delay.h> + +#define DRV_NAME "max6900" +#define DRV_VERSION "0.1" + +/* + * register indices + */ +#define MAX6900_REG_SC 0 /* seconds 00-59 */ +#define MAX6900_REG_MN 1 /* minutes 00-59 */ +#define MAX6900_REG_HR 2 /* hours 00-23 */ +#define MAX6900_REG_DT 3 /* day of month 00-31 */ +#define MAX6900_REG_MO 4 /* month 01-12 */ +#define MAX6900_REG_DW 5 /* day of week 1-7 */ +#define MAX6900_REG_YR 6 /* year 00-99 */ +#define MAX6900_REG_CT 7 /* control */ +#define MAX6900_REG_LEN 8 + +#define MAX6900_REG_CT_WP (1 << 7) /* Write Protect */ + +/* + * register read/write commands + */ +#define MAX6900_REG_CONTROL_WRITE 0x8e +#define MAX6900_REG_BURST_READ 0xbf +#define MAX6900_REG_BURST_WRITE 0xbe +#define MAX6900_REG_RESERVED_READ 0x96 + +#define MAX6900_IDLE_TIME_AFTER_WRITE 3 /* specification says 2.5 mS */ + +#define MAX6900_I2C_ADDR 0xa0 + +static unsigned short normal_i2c[] = { + MAX6900_I2C_ADDR >> 1, + I2C_CLIENT_END +}; + +I2C_CLIENT_INSMOD; /* defines addr_data */ + +static int max6900_probe(struct i2c_adapter *adapter, int addr, int kind); + +static int max6900_i2c_read_regs(struct i2c_client *client, u8 *buf) +{ + u8 reg_addr[1] = { MAX6900_REG_BURST_READ }; + struct i2c_msg msgs[2] = { + { + .addr = client->addr, + .flags = 0, /* write */ + .len = sizeof(reg_addr), + .buf = reg_addr + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = MAX6900_REG_LEN, + .buf = buf + } + }; + int rc; + + rc = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (rc != ARRAY_SIZE(msgs)) { + dev_err(&client->dev, "%s: register read failed\n", + __FUNCTION__); + return -EIO; + } + return 0; +} + +static int max6900_i2c_write_regs(struct i2c_client *client, u8 const *buf) +{ + u8 i2c_buf[MAX6900_REG_LEN + 1] = { MAX6900_REG_BURST_WRITE }; + struct i2c_msg msgs[1] = { + { + .addr = client->addr, + .flags = 0, /* write */ + .len = MAX6900_REG_LEN + 1, + .buf = i2c_buf + } + }; + int rc; + + memcpy(&i2c_buf[1], buf, MAX6900_REG_LEN); + + rc = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (rc != ARRAY_SIZE(msgs)) { + dev_err(&client->dev, "%s: register write failed\n", + __FUNCTION__); + return -EIO; + } + msleep(MAX6900_IDLE_TIME_AFTER_WRITE); + return 0; +} + +static int max6900_i2c_validate_client(struct i2c_client *client) +{ + u8 regs[MAX6900_REG_LEN]; + u8 zero_mask[MAX6900_REG_LEN] = { + 0x80, /* seconds */ + 0x80, /* minutes */ + 0x40, /* hours */ + 0xc0, /* day of month */ + 0xe0, /* month */ + 0xf8, /* day of week */ + 0x00, /* year */ + 0x7f, /* control */ + }; + int i; + int rc; + int reserved; + + reserved = i2c_smbus_read_byte_data(client, MAX6900_REG_RESERVED_READ); + if (reserved != 0x07) + return -ENODEV; + + rc = max6900_i2c_read_regs(client, regs); + if (rc < 0) + return rc; + + for (i = 0; i < MAX6900_REG_LEN; ++i) { + if (regs[i] & zero_mask[i]) + return -ENODEV; + } + + return 0; +} + +static int max6900_i2c_read_time(struct i2c_client *client, struct rtc_time *tm) +{ + int rc; + u8 regs[MAX6900_REG_LEN]; + + rc = max6900_i2c_read_regs(client, regs); + if (rc < 0) + return rc; + + tm->tm_sec = BCD2BIN(regs[MAX6900_REG_SC]); + tm->tm_min = BCD2BIN(regs[MAX6900_REG_MN]); + tm->tm_hour = BCD2BIN(regs[MAX6900_REG_HR] & 0x3f); + tm->tm_mday = BCD2BIN(regs[MAX6900_REG_DT]); + tm->tm_mon = BCD2BIN(regs[MAX6900_REG_MO]) - 1; + tm->tm_year = BCD2BIN(regs[MAX6900_REG_YR]) + 100; + tm->tm_wday = BCD2BIN(regs[MAX6900_REG_DW]); + + return 0; +} + +static int max6900_i2c_clear_write_protect(struct i2c_client *client) +{ + int rc; + rc = i2c_smbus_write_byte_data (client, MAX6900_REG_CONTROL_WRITE, 0); + if (rc < 0) { + dev_err(&client->dev, "%s: control register write failed\n", + __FUNCTION__); + return -EIO; + } + return 0; +} + +static int max6900_i2c_set_time(struct i2c_client *client, + struct rtc_time const *tm) +{ + u8 regs[MAX6900_REG_LEN]; + int rc; + + rc = max6900_i2c_clear_write_protect(client); + if (rc < 0) + return rc; + + regs[MAX6900_REG_SC] = BIN2BCD(tm->tm_sec); + regs[MAX6900_REG_MN] = BIN2BCD(tm->tm_min); + regs[MAX6900_REG_HR] = BIN2BCD(tm->tm_hour); + regs[MAX6900_REG_DT] = BIN2BCD(tm->tm_mday); + regs[MAX6900_REG_MO] = BIN2BCD(tm->tm_mon + 1); + regs[MAX6900_REG_YR] = BIN2BCD(tm->tm_year - 100); + regs[MAX6900_REG_DW] = BIN2BCD(tm->tm_wday); + regs[MAX6900_REG_CT] = MAX6900_REG_CT_WP; /* set write protect */ + + rc = max6900_i2c_write_regs(client, regs); + if (rc < 0) + return rc; + + return 0; +} + +static int max6900_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + return max6900_i2c_read_time(to_i2c_client(dev), tm); +} + +static int max6900_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return max6900_i2c_set_time(to_i2c_client(dev), tm); +} + +static int max6900_attach_adapter(struct i2c_adapter *adapter) +{ + return i2c_probe(adapter, &addr_data, max6900_probe); +} + +static int max6900_detach_client(struct i2c_client *client) +{ + struct rtc_device *const rtc = i2c_get_clientdata(client); + + if (rtc) + rtc_device_unregister(rtc); + + return i2c_detach_client(client); +} + +static struct i2c_driver max6900_driver = { + .driver = { + .name = DRV_NAME, + }, + .id = I2C_DRIVERID_MAX6900, + .attach_adapter = max6900_attach_adapter, + .detach_client = max6900_detach_client, +}; + +static const struct rtc_class_ops max6900_rtc_ops = { + .read_time = max6900_rtc_read_time, + .set_time = max6900_rtc_set_time, +}; + +static int max6900_probe(struct i2c_adapter *adapter, int addr, int kind) +{ + int rc = 0; + struct i2c_client *client = NULL; + struct rtc_device *rtc = NULL; + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { + rc = -ENODEV; + goto failout; + } + + client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (client == NULL) { + rc = -ENOMEM; + goto failout; + } + + client->addr = addr; + client->adapter = adapter; + client->driver = &max6900_driver; + strlcpy(client->name, DRV_NAME, I2C_NAME_SIZE); + + if (kind < 0) { + rc = max6900_i2c_validate_client(client); + if (rc < 0) + goto failout; + } + + rc = i2c_attach_client(client); + if (rc < 0) + goto failout; + + dev_info(&client->dev, + "chip found, driver version " DRV_VERSION "\n"); + + rtc = rtc_device_register(max6900_driver.driver.name, + &client->dev, + &max6900_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + rc = PTR_ERR(rtc); + goto failout_detach; + } + + i2c_set_clientdata(client, rtc); + + return 0; + +failout_detach: + i2c_detach_client(client); +failout: + kfree(client); + return rc; +} + +static int __init max6900_init(void) +{ + return i2c_add_driver(&max6900_driver); +} + +static void __exit max6900_exit(void) +{ + i2c_del_driver(&max6900_driver); +} + +MODULE_DESCRIPTION("Maxim MAX6900 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(max6900_init); +module_exit(max6900_exit); diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 9de8d67f4f8d..60a8a4bb8bd2 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -124,7 +124,7 @@ static void rtc_wait_not_busy(void) /* now we have ~15 usec to read/write various registers */ } -static irqreturn_t rtc_irq(int irq, void *class_dev) +static irqreturn_t rtc_irq(int irq, void *rtc) { unsigned long events = 0; u8 irq_data; @@ -141,7 +141,7 @@ static irqreturn_t rtc_irq(int irq, void *class_dev) if (irq_data & OMAP_RTC_STATUS_1S_EVENT) events |= RTC_IRQF | RTC_UF; - rtc_update_irq(class_dev, 1, events); + rtc_update_irq(rtc, 1, events); return IRQ_HANDLED; } @@ -289,34 +289,6 @@ static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) { u8 reg; - /* Much userspace code uses RTC_ALM_SET, thus "don't care" for - * day/month/year specifies alarms up to 24 hours in the future. - * So we need to handle that ... but let's ignore the "don't care" - * values for hours/minutes/seconds. - */ - if (alm->time.tm_mday <= 0 - && alm->time.tm_mon < 0 - && alm->time.tm_year < 0) { - struct rtc_time tm; - unsigned long now, then; - - omap_rtc_read_time(dev, &tm); - rtc_tm_to_time(&tm, &now); - - alm->time.tm_mday = tm.tm_mday; - alm->time.tm_mon = tm.tm_mon; - alm->time.tm_year = tm.tm_year; - rtc_tm_to_time(&alm->time, &then); - - /* sometimes the alarm wraps into tomorrow */ - if (then < now) { - rtc_time_to_tm(now + 24 * 60 * 60, &tm); - alm->time.tm_mday = tm.tm_mday; - alm->time.tm_mon = tm.tm_mon; - alm->time.tm_year = tm.tm_year; - } - } - if (tm2bcd(&alm->time) < 0) return -EINVAL; @@ -399,7 +371,7 @@ static int __devinit omap_rtc_probe(struct platform_device *pdev) goto fail; } platform_set_drvdata(pdev, rtc); - class_set_devdata(&rtc->class_dev, mem); + dev_set_devdata(&rtc->dev, mem); /* clear pending irqs, and set 1/second periodic, * which we'll use instead of update irqs @@ -418,13 +390,13 @@ static int __devinit omap_rtc_probe(struct platform_device *pdev) /* handle periodic and alarm irqs */ if (request_irq(omap_rtc_timer, rtc_irq, IRQF_DISABLED, - rtc->class_dev.class_id, &rtc->class_dev)) { + rtc->dev.bus_id, rtc)) { pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n", pdev->name, omap_rtc_timer); goto fail0; } if (request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED, - rtc->class_dev.class_id, &rtc->class_dev)) { + rtc->dev.bus_id, rtc)) { pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n", pdev->name, omap_rtc_alarm); goto fail1; @@ -481,26 +453,17 @@ static int __devexit omap_rtc_remove(struct platform_device *pdev) free_irq(omap_rtc_timer, rtc); free_irq(omap_rtc_alarm, rtc); - release_resource(class_get_devdata(&rtc->class_dev)); + release_resource(dev_get_devdata(&rtc->dev)); rtc_device_unregister(rtc); return 0; } #ifdef CONFIG_PM -static struct timespec rtc_delta; static u8 irqstat; static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state) { - struct rtc_time rtc_tm; - struct timespec time; - - time.tv_nsec = 0; - omap_rtc_read_time(NULL, &rtc_tm); - rtc_tm_to_time(&rtc_tm, &time.tv_sec); - - save_time_delta(&rtc_delta, &time); irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG); /* FIXME the RTC alarm is not currently acting as a wakeup event @@ -517,14 +480,6 @@ static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state) static int omap_rtc_resume(struct platform_device *pdev) { - struct rtc_time rtc_tm; - struct timespec time; - - time.tv_nsec = 0; - omap_rtc_read_time(NULL, &rtc_tm); - rtc_tm_to_time(&rtc_tm, &time.tv_sec); - - restore_time_delta(&rtc_delta, &time); if (device_may_wakeup(&pdev->dev)) disable_irq_wake(omap_rtc_alarm); else diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index f13daa9fecaa..e4bf68ca96f7 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -51,7 +51,7 @@ static irqreturn_t pl031_interrupt(int irq, void *dev_id) { struct rtc_device *rtc = dev_id; - rtc_update_irq(&rtc->class_dev, 1, RTC_AF); + rtc_update_irq(rtc, 1, RTC_AF); return IRQ_HANDLED; } diff --git a/drivers/rtc/rtc-proc.c b/drivers/rtc/rtc-proc.c index 1bd624fc685c..8d300e6d0d9e 100644 --- a/drivers/rtc/rtc-proc.c +++ b/drivers/rtc/rtc-proc.c @@ -16,18 +16,18 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> -static struct class_device *rtc_dev = NULL; -static DEFINE_MUTEX(rtc_lock); +#include "rtc-core.h" + static int rtc_proc_show(struct seq_file *seq, void *offset) { int err; - struct class_device *class_dev = seq->private; - const struct rtc_class_ops *ops = to_rtc_device(class_dev)->ops; + struct rtc_device *rtc = seq->private; + const struct rtc_class_ops *ops = rtc->ops; struct rtc_wkalrm alrm; struct rtc_time tm; - err = rtc_read_time(class_dev, &tm); + err = rtc_read_time(rtc, &tm); if (err == 0) { seq_printf(seq, "rtc_time\t: %02d:%02d:%02d\n" @@ -36,7 +36,7 @@ static int rtc_proc_show(struct seq_file *seq, void *offset) tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday); } - err = rtc_read_alarm(class_dev, &alrm); + err = rtc_read_alarm(rtc, &alrm); if (err == 0) { seq_printf(seq, "alrm_time\t: "); if ((unsigned int)alrm.time.tm_hour <= 24) @@ -74,19 +74,19 @@ static int rtc_proc_show(struct seq_file *seq, void *offset) seq_printf(seq, "24hr\t\t: yes\n"); if (ops->proc) - ops->proc(class_dev->dev, seq); + ops->proc(rtc->dev.parent, seq); return 0; } static int rtc_proc_open(struct inode *inode, struct file *file) { - struct class_device *class_dev = PDE(inode)->data; + struct rtc_device *rtc = PDE(inode)->data; if (!try_module_get(THIS_MODULE)) return -ENODEV; - return single_open(file, rtc_proc_show, class_dev); + return single_open(file, rtc_proc_show, rtc); } static int rtc_proc_release(struct inode *inode, struct file *file) @@ -103,62 +103,22 @@ static const struct file_operations rtc_proc_fops = { .release = rtc_proc_release, }; -static int rtc_proc_add_device(struct class_device *class_dev, - struct class_interface *class_intf) +void rtc_proc_add_device(struct rtc_device *rtc) { - mutex_lock(&rtc_lock); - if (rtc_dev == NULL) { + if (rtc->id == 0) { struct proc_dir_entry *ent; - rtc_dev = class_dev; - ent = create_proc_entry("driver/rtc", 0, NULL); if (ent) { - struct rtc_device *rtc = to_rtc_device(class_dev); - ent->proc_fops = &rtc_proc_fops; ent->owner = rtc->owner; - ent->data = class_dev; - - dev_dbg(class_dev->dev, "rtc intf: proc\n"); + ent->data = rtc; } - else - rtc_dev = NULL; } - mutex_unlock(&rtc_lock); - - return 0; } -static void rtc_proc_remove_device(struct class_device *class_dev, - struct class_interface *class_intf) +void rtc_proc_del_device(struct rtc_device *rtc) { - mutex_lock(&rtc_lock); - if (rtc_dev == class_dev) { + if (rtc->id == 0) remove_proc_entry("driver/rtc", NULL); - rtc_dev = NULL; - } - mutex_unlock(&rtc_lock); -} - -static struct class_interface rtc_proc_interface = { - .add = &rtc_proc_add_device, - .remove = &rtc_proc_remove_device, -}; - -static int __init rtc_proc_init(void) -{ - return rtc_interface_register(&rtc_proc_interface); } - -static void __exit rtc_proc_exit(void) -{ - class_interface_unregister(&rtc_proc_interface); -} - -subsys_initcall(rtc_proc_init); -module_exit(rtc_proc_exit); - -MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("RTC class proc interface"); -MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-rs5c313.c b/drivers/rtc/rtc-rs5c313.c new file mode 100644 index 000000000000..9d6de371495b --- /dev/null +++ b/drivers/rtc/rtc-rs5c313.c @@ -0,0 +1,405 @@ +/* + * Ricoh RS5C313 RTC device/driver + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * 2005-09-19 modifed by kogiidena + * + * Based on the old drivers/char/rs5c313_rtc.c by: + * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org> + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * + * Based on code written by Paul Gortmaker. + * Copyright (C) 1996 Paul Gortmaker + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Based on other minimal char device drivers, like Alan's + * watchdog, Ted's random, etc. etc. + * + * 1.07 Paul Gortmaker. + * 1.08 Miquel van Smoorenburg: disallow certain things on the + * DEC Alpha as the CMOS clock is also used for other things. + * 1.09 Nikita Schmidt: epoch support and some Alpha cleanup. + * 1.09a Pete Zaitcev: Sun SPARC + * 1.09b Jeff Garzik: Modularize, init cleanup + * 1.09c Jeff Garzik: SMP cleanup + * 1.10 Paul Barton-Davis: add support for async I/O + * 1.10a Andrea Arcangeli: Alpha updates + * 1.10b Andrew Morton: SMP lock fix + * 1.10c Cesar Barros: SMP locking fixes and cleanup + * 1.10d Paul Gortmaker: delete paranoia check in rtc_exit + * 1.10e Maciej W. Rozycki: Handle DECstation's year weirdness. + * 1.11 Takashi Iwai: Kernel access functions + * rtc_register/rtc_unregister/rtc_control + * 1.11a Daniele Bellucci: Audit create_proc_read_entry in rtc_init + * 1.12 Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer + * CONFIG_HPET_EMULATE_RTC + * 1.13 Nobuhiro Iwamatsu: Updata driver. + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/rtc.h> +#include <linux/platform_device.h> +#include <linux/bcd.h> +#include <linux/delay.h> +#include <asm/io.h> + +#define DRV_NAME "rs5c313" +#define DRV_VERSION "1.13" + +#ifdef CONFIG_SH_LANDISK +/*****************************************************/ +/* LANDISK dependence part of RS5C313 */ +/*****************************************************/ + +#define SCSMR1 0xFFE00000 +#define SCSCR1 0xFFE00008 +#define SCSMR1_CA 0x80 +#define SCSCR1_CKE 0x03 +#define SCSPTR1 0xFFE0001C +#define SCSPTR1_EIO 0x80 +#define SCSPTR1_SPB1IO 0x08 +#define SCSPTR1_SPB1DT 0x04 +#define SCSPTR1_SPB0IO 0x02 +#define SCSPTR1_SPB0DT 0x01 + +#define SDA_OEN SCSPTR1_SPB1IO +#define SDA SCSPTR1_SPB1DT +#define SCL_OEN SCSPTR1_SPB0IO +#define SCL SCSPTR1_SPB0DT + +/* RICOH RS5C313 CE port */ +#define RS5C313_CE 0xB0000003 + +/* RICOH RS5C313 CE port bit */ +#define RS5C313_CE_RTCCE 0x02 + +/* SCSPTR1 data */ +unsigned char scsptr1_data; + +#define RS5C313_CEENABLE ctrl_outb(RS5C313_CE_RTCCE, RS5C313_CE); +#define RS5C313_CEDISABLE ctrl_outb(0x00, RS5C313_CE) +#define RS5C313_MISCOP ctrl_outb(0x02, 0xB0000008) + +static void rs5c313_init_port(void) +{ + /* Set SCK as I/O port and Initialize SCSPTR1 data & I/O port. */ + ctrl_outb(ctrl_inb(SCSMR1) & ~SCSMR1_CA, SCSMR1); + ctrl_outb(ctrl_inb(SCSCR1) & ~SCSCR1_CKE, SCSCR1); + + /* And Initialize SCL for RS5C313 clock */ + scsptr1_data = ctrl_inb(SCSPTR1) | SCL; /* SCL:H */ + ctrl_outb(scsptr1_data, SCSPTR1); + scsptr1_data = ctrl_inb(SCSPTR1) | SCL_OEN; /* SCL output enable */ + ctrl_outb(scsptr1_data, SCSPTR1); + RS5C313_CEDISABLE; /* CE:L */ +} + +static void rs5c313_write_data(unsigned char data) +{ + int i; + + for (i = 0; i < 8; i++) { + /* SDA:Write Data */ + scsptr1_data = (scsptr1_data & ~SDA) | + ((((0x80 >> i) & data) >> (7 - i)) << 2); + ctrl_outb(scsptr1_data, SCSPTR1); + if (i == 0) { + scsptr1_data |= SDA_OEN; /* SDA:output enable */ + ctrl_outb(scsptr1_data, SCSPTR1); + } + ndelay(700); + scsptr1_data &= ~SCL; /* SCL:L */ + ctrl_outb(scsptr1_data, SCSPTR1); + ndelay(700); + scsptr1_data |= SCL; /* SCL:H */ + ctrl_outb(scsptr1_data, SCSPTR1); + } + + scsptr1_data &= ~SDA_OEN; /* SDA:output disable */ + ctrl_outb(scsptr1_data, SCSPTR1); +} + +static unsigned char rs5c313_read_data(void) +{ + int i; + unsigned char data; + + for (i = 0; i < 8; i++) { + ndelay(700); + /* SDA:Read Data */ + data |= ((ctrl_inb(SCSPTR1) & SDA) >> 2) << (7 - i); + scsptr1_data &= ~SCL; /* SCL:L */ + ctrl_outb(scsptr1_data, SCSPTR1); + ndelay(700); + scsptr1_data |= SCL; /* SCL:H */ + ctrl_outb(scsptr1_data, SCSPTR1); + } + return data & 0x0F; +} + +#endif /* CONFIG_SH_LANDISK */ + +/*****************************************************/ +/* machine independence part of RS5C313 */ +/*****************************************************/ + +/* RICOH RS5C313 address */ +#define RS5C313_ADDR_SEC 0x00 +#define RS5C313_ADDR_SEC10 0x01 +#define RS5C313_ADDR_MIN 0x02 +#define RS5C313_ADDR_MIN10 0x03 +#define RS5C313_ADDR_HOUR 0x04 +#define RS5C313_ADDR_HOUR10 0x05 +#define RS5C313_ADDR_WEEK 0x06 +#define RS5C313_ADDR_INTINTVREG 0x07 +#define RS5C313_ADDR_DAY 0x08 +#define RS5C313_ADDR_DAY10 0x09 +#define RS5C313_ADDR_MON 0x0A +#define RS5C313_ADDR_MON10 0x0B +#define RS5C313_ADDR_YEAR 0x0C +#define RS5C313_ADDR_YEAR10 0x0D +#define RS5C313_ADDR_CNTREG 0x0E +#define RS5C313_ADDR_TESTREG 0x0F + +/* RICOH RS5C313 control register */ +#define RS5C313_CNTREG_ADJ_BSY 0x01 +#define RS5C313_CNTREG_WTEN_XSTP 0x02 +#define RS5C313_CNTREG_12_24 0x04 +#define RS5C313_CNTREG_CTFG 0x08 + +/* RICOH RS5C313 test register */ +#define RS5C313_TESTREG_TEST 0x01 + +/* RICOH RS5C313 control bit */ +#define RS5C313_CNTBIT_READ 0x40 +#define RS5C313_CNTBIT_AD 0x20 +#define RS5C313_CNTBIT_DT 0x10 + +static unsigned char rs5c313_read_reg(unsigned char addr) +{ + + rs5c313_write_data(addr | RS5C313_CNTBIT_READ | RS5C313_CNTBIT_AD); + return rs5c313_read_data(); +} + +static void rs5c313_write_reg(unsigned char addr, unsigned char data) +{ + data &= 0x0f; + rs5c313_write_data(addr | RS5C313_CNTBIT_AD); + rs5c313_write_data(data | RS5C313_CNTBIT_DT); + return; +} + +static inline unsigned char rs5c313_read_cntreg(unsigned char addr) +{ + return rs5c313_read_reg(RS5C313_ADDR_CNTREG); +} + +static inline void rs5c313_write_cntreg(unsigned char data) +{ + rs5c313_write_reg(RS5C313_ADDR_CNTREG, data); +} + +static inline void rs5c313_write_intintvreg(unsigned char data) +{ + rs5c313_write_reg(RS5C313_ADDR_INTINTVREG, data); +} + +static int rs5c313_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + int data; + + while (1) { + RS5C313_CEENABLE; /* CE:H */ + + /* Initialize control reg. 24 hour */ + rs5c313_write_cntreg(0x04); + + if (!(rs5c313_read_cntreg() & RS5C313_CNTREG_ADJ_BSY)) + break; + + RS5C313_CEDISABLE; + ndelay(700); /* CE:L */ + + } + + data = rs5c313_read_reg(RS5C313_ADDR_SEC); + data |= (rs5c313_read_reg(RS5C313_ADDR_SEC10) << 4); + tm->tm_sec = BCD2BIN(data); + + data = rs5c313_read_reg(RS5C313_ADDR_MIN); + data |= (rs5c313_read_reg(RS5C313_ADDR_MIN10) << 4); + tm->tm_min = BCD2BIN(data); + + data = rs5c313_read_reg(RS5C313_ADDR_HOUR); + data |= (rs5c313_read_reg(RS5C313_ADDR_HOUR10) << 4); + tm->tm_hour = BCD2BIN(data); + + data = rs5c313_read_reg(RS5C313_ADDR_DAY); + data |= (rs5c313_read_reg(RS5C313_ADDR_DAY10) << 4); + tm->tm_mday = BCD2BIN(data); + + data = rs5c313_read_reg(RS5C313_ADDR_MON); + data |= (rs5c313_read_reg(RS5C313_ADDR_MON10) << 4); + tm->tm_mon = BCD2BIN(data) - 1; + + data = rs5c313_read_reg(RS5C313_ADDR_YEAR); + data |= (rs5c313_read_reg(RS5C313_ADDR_YEAR10) << 4); + tm->tm_year = BCD2BIN(data); + + if (tm->tm_year < 70) + tm->tm_year += 100; + + data = rs5c313_read_reg(RS5C313_ADDR_WEEK); + tm->tm_wday = BCD2BIN(data); + + RS5C313_CEDISABLE; + ndelay(700); /* CE:L */ + + return 0; +} + +static int rs5c313_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + int data; + + /* busy check. */ + while (1) { + RS5C313_CEENABLE; /* CE:H */ + + /* Initiatlize control reg. 24 hour */ + rs5c313_write_cntreg(0x04); + + if (!(rs5c313_read_cntreg() & RS5C313_CNTREG_ADJ_BSY)) + break; + RS5C313_MISCOP; + RS5C313_CEDISABLE; + ndelay(700); /* CE:L */ + } + + data = BIN2BCD(tm->tm_sec); + rs5c313_write_reg(RS5C313_ADDR_SEC, data); + rs5c313_write_reg(RS5C313_ADDR_SEC10, (data >> 4)); + + data = BIN2BCD(tm->tm_min); + rs5c313_write_reg(RS5C313_ADDR_MIN, data ); + rs5c313_write_reg(RS5C313_ADDR_MIN10, (data >> 4)); + + data = BIN2BCD(tm->tm_hour); + rs5c313_write_reg(RS5C313_ADDR_HOUR, data); + rs5c313_write_reg(RS5C313_ADDR_HOUR10, (data >> 4)); + + data = BIN2BCD(tm->tm_mday); + rs5c313_write_reg(RS5C313_ADDR_DAY, data); + rs5c313_write_reg(RS5C313_ADDR_DAY10, (data>> 4)); + + data = BIN2BCD(tm->tm_mon + 1); + rs5c313_write_reg(RS5C313_ADDR_MON, data); + rs5c313_write_reg(RS5C313_ADDR_MON10, (data >> 4)); + + data = BIN2BCD(tm->tm_year % 100); + rs5c313_write_reg(RS5C313_ADDR_YEAR, data); + rs5c313_write_reg(RS5C313_ADDR_YEAR10, (data >> 4)); + + data = BIN2BCD(tm->tm_wday); + rs5c313_write_reg(RS5C313_ADDR_WEEK, data); + + RS5C313_CEDISABLE; /* CE:H */ + ndelay(700); + + return 0; +} + +static void rs5c313_check_xstp_bit(void) +{ + struct rtc_time tm; + + RS5C313_CEENABLE; /* CE:H */ + if (rs5c313_read_cntreg() & RS5C313_CNTREG_WTEN_XSTP) { + /* INT interval reg. OFF */ + rs5c313_write_intintvreg(0x00); + /* Initialize control reg. 24 hour & adjust */ + rs5c313_write_cntreg(0x07); + + /* busy check. */ + while (rs5c313_read_cntreg() & RS5C313_CNTREG_ADJ_BSY) + RS5C313_MISCOP; + + memset(&tm, 0, sizeof(struct rtc_time)); + tm.tm_mday = 1; + tm.tm_mon = 1; + + rs5c313_rtc_set_time(NULL, &tm); + printk(KERN_ERR "RICHO RS5C313: invalid value, resetting to " + "1 Jan 2000\n"); + } + RS5C313_CEDISABLE; + ndelay(700); /* CE:L */ +} + +static const struct rtc_class_ops rs5c313_rtc_ops = { + .read_time = rs5c313_rtc_read_time, + .set_time = rs5c313_rtc_set_time, +}; + +static int rs5c313_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc = rtc_device_register("rs5c313", &pdev->dev, + &rs5c313_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); + + return err; +} + +static int __devexit rs5c313_rtc_remove(struct platform_device *pdev) +{ + struct rtc_device *rtc = platform_get_drvdata( pdev ); + + rtc_device_unregister(rtc); + + return 0; +} + +static struct platform_driver rs5c313_rtc_platform_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = rs5c313_rtc_probe, + .remove = __devexit_p( rs5c313_rtc_remove ), +}; + +static int __init rs5c313_rtc_init(void) +{ + int err; + + err = platform_driver_register(&rs5c313_rtc_platform_driver); + if (err) + return err; + + rs5c313_init_port(); + rs5c313_check_xstp_bit(); + + return 0; +} + +static void __exit rs5c313_rtc_exit(void) +{ + platform_driver_unregister( &rs5c313_rtc_platform_driver ); +} + +module_init(rs5c313_rtc_init); +module_exit(rs5c313_rtc_exit); + +MODULE_VERSION(DRV_VERSION); +MODULE_AUTHOR("kogiidena , Nobuhiro Iwamatsu <iwamatsu@nigauri.org>"); +MODULE_DESCRIPTION("Ricoh RS5C313 RTC device driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 9a79a24a7487..54b613053468 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -50,7 +50,7 @@ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id) { struct rtc_device *rdev = id; - rtc_update_irq(&rdev->class_dev, 1, RTC_AF | RTC_IRQF); + rtc_update_irq(rdev, 1, RTC_AF | RTC_IRQF); return IRQ_HANDLED; } @@ -58,7 +58,7 @@ static irqreturn_t s3c_rtc_tickirq(int irq, void *id) { struct rtc_device *rdev = id; - rtc_update_irq(&rdev->class_dev, tick_count++, RTC_PF | RTC_IRQF); + rtc_update_irq(rdev, tick_count++, RTC_PF | RTC_IRQF); return IRQ_HANDLED; } @@ -548,37 +548,15 @@ static int ticnt_save; static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state) { - struct rtc_time tm; - struct timespec time; - - time.tv_nsec = 0; - /* save TICNT for anyone using periodic interrupts */ - ticnt_save = readb(s3c_rtc_base + S3C2410_TICNT); - - /* calculate time delta for suspend */ - - s3c_rtc_gettime(&pdev->dev, &tm); - rtc_tm_to_time(&tm, &time.tv_sec); - save_time_delta(&s3c_rtc_delta, &time); s3c_rtc_enable(pdev, 0); - return 0; } static int s3c_rtc_resume(struct platform_device *pdev) { - struct rtc_time tm; - struct timespec time; - - time.tv_nsec = 0; - s3c_rtc_enable(pdev, 1); - s3c_rtc_gettime(&pdev->dev, &tm); - rtc_tm_to_time(&tm, &time.tv_sec); - restore_time_delta(&s3c_rtc_delta, &time); - writeb(ticnt_save, s3c_rtc_base + S3C2410_TICNT); return 0; } diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 677bae820dc3..0918b787c4dd 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -93,7 +93,7 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) if (rtsr & RTSR_HZ) events |= RTC_UF | RTC_IRQF; - rtc_update_irq(&rtc->class_dev, 1, events); + rtc_update_irq(rtc, 1, events); if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm)) rtc_update_alarm(&rtc_alarm); @@ -119,7 +119,7 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) */ OSSR = OSSR_M1; /* clear match on timer1 */ - rtc_update_irq(&rtc->class_dev, rtc_timer1_count, RTC_PF | RTC_IRQF); + rtc_update_irq(rtc, rtc_timer1_count, RTC_PF | RTC_IRQF); if (rtc_timer1_count == 1) rtc_timer1_count = (rtc_freq * ((1<<30)/(TIMER_FREQ>>2))); diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c index 198b9f22fbff..6abf4811958c 100644 --- a/drivers/rtc/rtc-sh.c +++ b/drivers/rtc/rtc-sh.c @@ -104,7 +104,7 @@ static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id) writeb(tmp, rtc->regbase + RCR1); - rtc_update_irq(&rtc->rtc_dev->class_dev, 1, events); + rtc_update_irq(&rtc->rtc_dev, 1, events); spin_unlock(&rtc->lock); @@ -139,7 +139,7 @@ static irqreturn_t sh_rtc_alarm(int irq, void *dev_id) rtc->rearm_aie = 1; - rtc_update_irq(&rtc->rtc_dev->class_dev, 1, events); + rtc_update_irq(&rtc->rtc_dev, 1, events); } spin_unlock(&rtc->lock); @@ -153,7 +153,7 @@ static irqreturn_t sh_rtc_periodic(int irq, void *dev_id) spin_lock(&rtc->lock); - rtc_update_irq(&rtc->rtc_dev->class_dev, 1, RTC_PF | RTC_IRQF); + rtc_update_irq(&rtc->rtc_dev, 1, RTC_PF | RTC_IRQF); spin_unlock(&rtc->lock); diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c index 899ab8c514fa..69df94b44841 100644 --- a/drivers/rtc/rtc-sysfs.c +++ b/drivers/rtc/rtc-sysfs.c @@ -12,20 +12,26 @@ #include <linux/module.h> #include <linux/rtc.h> +#include "rtc-core.h" + + /* device attributes */ -static ssize_t rtc_sysfs_show_name(struct class_device *dev, char *buf) +static ssize_t +rtc_sysfs_show_name(struct device *dev, struct device_attribute *attr, + char *buf) { return sprintf(buf, "%s\n", to_rtc_device(dev)->name); } -static CLASS_DEVICE_ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL); -static ssize_t rtc_sysfs_show_date(struct class_device *dev, char *buf) +static ssize_t +rtc_sysfs_show_date(struct device *dev, struct device_attribute *attr, + char *buf) { ssize_t retval; struct rtc_time tm; - retval = rtc_read_time(dev, &tm); + retval = rtc_read_time(to_rtc_device(dev), &tm); if (retval == 0) { retval = sprintf(buf, "%04d-%02d-%02d\n", tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday); @@ -33,14 +39,15 @@ static ssize_t rtc_sysfs_show_date(struct class_device *dev, char *buf) return retval; } -static CLASS_DEVICE_ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL); -static ssize_t rtc_sysfs_show_time(struct class_device *dev, char *buf) +static ssize_t +rtc_sysfs_show_time(struct device *dev, struct device_attribute *attr, + char *buf) { ssize_t retval; struct rtc_time tm; - retval = rtc_read_time(dev, &tm); + retval = rtc_read_time(to_rtc_device(dev), &tm); if (retval == 0) { retval = sprintf(buf, "%02d:%02d:%02d\n", tm.tm_hour, tm.tm_min, tm.tm_sec); @@ -48,14 +55,15 @@ static ssize_t rtc_sysfs_show_time(struct class_device *dev, char *buf) return retval; } -static CLASS_DEVICE_ATTR(time, S_IRUGO, rtc_sysfs_show_time, NULL); -static ssize_t rtc_sysfs_show_since_epoch(struct class_device *dev, char *buf) +static ssize_t +rtc_sysfs_show_since_epoch(struct device *dev, struct device_attribute *attr, + char *buf) { ssize_t retval; struct rtc_time tm; - retval = rtc_read_time(dev, &tm); + retval = rtc_read_time(to_rtc_device(dev), &tm); if (retval == 0) { unsigned long time; rtc_tm_to_time(&tm, &time); @@ -64,23 +72,18 @@ static ssize_t rtc_sysfs_show_since_epoch(struct class_device *dev, char *buf) return retval; } -static CLASS_DEVICE_ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL); - -static struct attribute *rtc_attrs[] = { - &class_device_attr_name.attr, - &class_device_attr_date.attr, - &class_device_attr_time.attr, - &class_device_attr_since_epoch.attr, - NULL, -}; -static struct attribute_group rtc_attr_group = { - .attrs = rtc_attrs, +static struct device_attribute rtc_attrs[] = { + __ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL), + __ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL), + __ATTR(time, S_IRUGO, rtc_sysfs_show_time, NULL), + __ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL), + { }, }; - static ssize_t -rtc_sysfs_show_wakealarm(struct class_device *dev, char *buf) +rtc_sysfs_show_wakealarm(struct device *dev, struct device_attribute *attr, + char *buf) { ssize_t retval; unsigned long alarm; @@ -94,7 +97,7 @@ rtc_sysfs_show_wakealarm(struct class_device *dev, char *buf) * REVISIT maybe we should require RTC implementations to * disable the RTC alarm after it triggers, for uniformity. */ - retval = rtc_read_alarm(dev, &alm); + retval = rtc_read_alarm(to_rtc_device(dev), &alm); if (retval == 0 && alm.enabled) { rtc_tm_to_time(&alm.time, &alarm); retval = sprintf(buf, "%lu\n", alarm); @@ -104,16 +107,18 @@ rtc_sysfs_show_wakealarm(struct class_device *dev, char *buf) } static ssize_t -rtc_sysfs_set_wakealarm(struct class_device *dev, const char *buf, size_t n) +rtc_sysfs_set_wakealarm(struct device *dev, struct device_attribute *attr, + const char *buf, size_t n) { ssize_t retval; unsigned long now, alarm; struct rtc_wkalrm alm; + struct rtc_device *rtc = to_rtc_device(dev); /* Only request alarms that trigger in the future. Disable them * by writing another time, e.g. 0 meaning Jan 1 1970 UTC. */ - retval = rtc_read_time(dev, &alm.time); + retval = rtc_read_time(rtc, &alm.time); if (retval < 0) return retval; rtc_tm_to_time(&alm.time, &now); @@ -124,7 +129,7 @@ rtc_sysfs_set_wakealarm(struct class_device *dev, const char *buf, size_t n) * entirely prevent that here, without even the minimal * locking from the /dev/rtcN api. */ - retval = rtc_read_alarm(dev, &alm); + retval = rtc_read_alarm(rtc, &alm); if (retval < 0) return retval; if (alm.enabled) @@ -141,10 +146,10 @@ rtc_sysfs_set_wakealarm(struct class_device *dev, const char *buf, size_t n) } rtc_time_to_tm(alarm, &alm.time); - retval = rtc_set_alarm(dev, &alm); + retval = rtc_set_alarm(rtc, &alm); return (retval < 0) ? retval : n; } -static const CLASS_DEVICE_ATTR(wakealarm, S_IRUGO | S_IWUSR, +static DEVICE_ATTR(wakealarm, S_IRUGO | S_IWUSR, rtc_sysfs_show_wakealarm, rtc_sysfs_set_wakealarm); @@ -153,71 +158,37 @@ static const CLASS_DEVICE_ATTR(wakealarm, S_IRUGO | S_IWUSR, * suspend-to-disk. So: no attribute unless that side effect is possible. * (Userspace may disable that mechanism later.) */ -static inline int rtc_does_wakealarm(struct class_device *class_dev) +static inline int rtc_does_wakealarm(struct rtc_device *rtc) { - struct rtc_device *rtc; - - if (!device_can_wakeup(class_dev->dev)) + if (!device_can_wakeup(rtc->dev.parent)) return 0; - rtc = to_rtc_device(class_dev); return rtc->ops->set_alarm != NULL; } -static int rtc_sysfs_add_device(struct class_device *class_dev, - struct class_interface *class_intf) +void rtc_sysfs_add_device(struct rtc_device *rtc) { int err; - dev_dbg(class_dev->dev, "rtc intf: sysfs\n"); + /* not all RTCs support both alarms and wakeup */ + if (!rtc_does_wakealarm(rtc)) + return; - err = sysfs_create_group(&class_dev->kobj, &rtc_attr_group); + err = device_create_file(&rtc->dev, &dev_attr_wakealarm); if (err) - dev_err(class_dev->dev, "failed to create %s\n", - "sysfs attributes"); - else if (rtc_does_wakealarm(class_dev)) { - /* not all RTCs support both alarms and wakeup */ - err = class_device_create_file(class_dev, - &class_device_attr_wakealarm); - if (err) { - dev_err(class_dev->dev, "failed to create %s\n", - "alarm attribute"); - sysfs_remove_group(&class_dev->kobj, &rtc_attr_group); - } - } - - return err; + dev_err(rtc->dev.parent, "failed to create " + "alarm attribute, %d", + err); } -static void rtc_sysfs_remove_device(struct class_device *class_dev, - struct class_interface *class_intf) +void rtc_sysfs_del_device(struct rtc_device *rtc) { - if (rtc_does_wakealarm(class_dev)) - class_device_remove_file(class_dev, - &class_device_attr_wakealarm); - sysfs_remove_group(&class_dev->kobj, &rtc_attr_group); + /* REVISIT did we add it successfully? */ + if (rtc_does_wakealarm(rtc)) + device_remove_file(&rtc->dev, &dev_attr_wakealarm); } -/* interface registration */ - -static struct class_interface rtc_sysfs_interface = { - .add = &rtc_sysfs_add_device, - .remove = &rtc_sysfs_remove_device, -}; - -static int __init rtc_sysfs_init(void) +void __init rtc_sysfs_init(struct class *rtc_class) { - return rtc_interface_register(&rtc_sysfs_interface); + rtc_class->dev_attrs = rtc_attrs; } - -static void __exit rtc_sysfs_exit(void) -{ - class_interface_unregister(&rtc_sysfs_interface); -} - -subsys_initcall(rtc_sysfs_init); -module_exit(rtc_sysfs_exit); - -MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("RTC class sysfs interface"); -MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c index f50a1b8e1607..254c9fce27da 100644 --- a/drivers/rtc/rtc-test.c +++ b/drivers/rtc/rtc-test.c @@ -101,11 +101,11 @@ static ssize_t test_irq_store(struct device *dev, retval = count; local_irq_disable(); if (strncmp(buf, "tick", 4) == 0) - rtc_update_irq(&rtc->class_dev, 1, RTC_PF | RTC_IRQF); + rtc_update_irq(rtc, 1, RTC_PF | RTC_IRQF); else if (strncmp(buf, "alarm", 5) == 0) - rtc_update_irq(&rtc->class_dev, 1, RTC_AF | RTC_IRQF); + rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF); else if (strncmp(buf, "update", 6) == 0) - rtc_update_irq(&rtc->class_dev, 1, RTC_UF | RTC_IRQF); + rtc_update_irq(rtc, 1, RTC_UF | RTC_IRQF); else retval = -EINVAL; local_irq_enable(); diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c index e40322b71938..af7596ef29e2 100644 --- a/drivers/rtc/rtc-vr41xx.c +++ b/drivers/rtc/rtc-vr41xx.c @@ -97,6 +97,7 @@ static DEFINE_SPINLOCK(rtc_lock); static char rtc_name[] = "RTC"; static unsigned long periodic_frequency; static unsigned long periodic_count; +static unsigned int alarm_enabled; struct resource rtc_resource[2] = { { .name = rtc_name, @@ -188,6 +189,7 @@ static int vr41xx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm) low = rtc1_read(ECMPLREG); mid = rtc1_read(ECMPMREG); high = rtc1_read(ECMPHREG); + wkalrm->enabled = alarm_enabled; spin_unlock_irq(&rtc_lock); @@ -206,10 +208,18 @@ static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm) spin_lock_irq(&rtc_lock); + if (alarm_enabled) + disable_irq(ELAPSEDTIME_IRQ); + rtc1_write(ECMPLREG, (uint16_t)(alarm_sec << 15)); rtc1_write(ECMPMREG, (uint16_t)(alarm_sec >> 1)); rtc1_write(ECMPHREG, (uint16_t)(alarm_sec >> 17)); + if (wkalrm->enabled) + enable_irq(ELAPSEDTIME_IRQ); + + alarm_enabled = wkalrm->enabled; + spin_unlock_irq(&rtc_lock); return 0; @@ -221,10 +231,24 @@ static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long switch (cmd) { case RTC_AIE_ON: - enable_irq(ELAPSEDTIME_IRQ); + spin_lock_irq(&rtc_lock); + + if (!alarm_enabled) { + enable_irq(ELAPSEDTIME_IRQ); + alarm_enabled = 1; + } + + spin_unlock_irq(&rtc_lock); break; case RTC_AIE_OFF: - disable_irq(ELAPSEDTIME_IRQ); + spin_lock_irq(&rtc_lock); + + if (alarm_enabled) { + disable_irq(ELAPSEDTIME_IRQ); + alarm_enabled = 0; + } + + spin_unlock_irq(&rtc_lock); break; case RTC_PIE_ON: enable_irq(RTCLONG1_IRQ); @@ -275,7 +299,7 @@ static irqreturn_t elapsedtime_interrupt(int irq, void *dev_id) rtc2_write(RTCINTREG, ELAPSEDTIME_INT); - rtc_update_irq(&rtc->class_dev, 1, RTC_AF); + rtc_update_irq(rtc, 1, RTC_AF); return IRQ_HANDLED; } @@ -291,7 +315,7 @@ static irqreturn_t rtclong1_interrupt(int irq, void *dev_id) rtc1_write(RTCL1LREG, count); rtc1_write(RTCL1HREG, count >> 16); - rtc_update_irq(&rtc->class_dev, 1, RTC_PF); + rtc_update_irq(rtc, 1, RTC_PF); return IRQ_HANDLED; } diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c index cba64e4cfcd4..f770018fe1d5 100644 --- a/drivers/s390/cio/qdio.c +++ b/drivers/s390/cio/qdio.c @@ -996,18 +996,25 @@ __qdio_outbound_processing(struct qdio_q *q) if (qdio_has_outbound_q_moved(q)) qdio_kick_outbound_handler(q); - if (q->is_iqdio_q) { + if (q->queue_type == QDIO_ZFCP_QFMT) { + if ((!q->hydra_gives_outbound_pcis) && + (!qdio_is_outbound_q_done(q))) + qdio_mark_q(q); + } + else if (((!q->is_iqdio_q) && (!q->is_pci_out)) || + (q->queue_type == QDIO_IQDIO_QFMT_ASYNCH)) { /* - * for asynchronous queues, we better check, if the sent - * buffer is already switched from PRIMED to EMPTY. + * make sure buffer switch from PRIMED to EMPTY is noticed + * and outbound_handler is called */ - if ((q->queue_type == QDIO_IQDIO_QFMT_ASYNCH) && - !qdio_is_outbound_q_done(q)) - qdio_mark_q(q); - - } else if (!q->hydra_gives_outbound_pcis) - if (!qdio_is_outbound_q_done(q)) - qdio_mark_q(q); + if (qdio_is_outbound_q_done(q)) { + del_timer(&q->timer); + } else { + if (!timer_pending(&q->timer)) + mod_timer(&q->timer, jiffies + + QDIO_FORCE_CHECK_TIMEOUT); + } + } qdio_release_q(q); } @@ -1826,6 +1833,7 @@ qdio_fill_qs(struct qdio_irq *irq_ptr, struct ccw_device *cdev, q->queue_type = QDIO_IQDIO_QFMT_ASYNCH; q->int_parm=int_parm; q->is_input_q=0; + q->is_pci_out = 0; q->schid = irq_ptr->schid; q->cdev = cdev; q->irq_ptr = irq_ptr; @@ -1838,6 +1846,10 @@ qdio_fill_qs(struct qdio_irq *irq_ptr, struct ccw_device *cdev, q->tasklet.data=(unsigned long)q; q->tasklet.func=(void(*)(unsigned long)) &qdio_outbound_processing; + q->timer.function=(void(*)(unsigned long)) + &qdio_outbound_processing; + q->timer.data = (long)q; + init_timer(&q->timer); atomic_set(&q->busy_siga_counter,0); q->timing.busy_start=0; @@ -2635,6 +2647,7 @@ qdio_shutdown(struct ccw_device *cdev, int how) for (i=0;i<irq_ptr->no_output_qs;i++) { tasklet_kill(&irq_ptr->output_qs[i]->tasklet); + del_timer(&irq_ptr->output_qs[i]->timer); wait_event_interruptible_timeout(cdev->private->wait_q, !atomic_read(&irq_ptr-> output_qs[i]-> @@ -3458,6 +3471,10 @@ do_qdio_handle_outbound(struct qdio_q *q, unsigned int callflags, qdio_perf_stat_inc(&perf_stats.outbound_cnt); return; } + if (callflags & QDIO_FLAG_PCI_OUT) + q->is_pci_out = 1; + else + q->is_pci_out = 0; if (q->is_iqdio_q) { /* one siga for every sbal */ while (count--) diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h index 2895392eaae4..6d7aad18f6f0 100644 --- a/drivers/s390/cio/qdio.h +++ b/drivers/s390/cio/qdio.h @@ -60,6 +60,7 @@ #define QDIO_ACTIVATE_TIMEOUT ((5*HZ)>>10) #define QDIO_CLEANUP_CLEAR_TIMEOUT (20*HZ) #define QDIO_CLEANUP_HALT_TIMEOUT (10*HZ) +#define QDIO_FORCE_CHECK_TIMEOUT (10*HZ) enum qdio_irq_states { QDIO_IRQ_STATE_INACTIVE, @@ -511,8 +512,8 @@ struct qdio_q { void *irq_ptr; -#ifdef QDIO_USE_TIMERS_FOR_POLLING struct timer_list timer; +#ifdef QDIO_USE_TIMERS_FOR_POLLING atomic_t timer_already_set; spinlock_t timer_lock; #else /* QDIO_USE_TIMERS_FOR_POLLING */ @@ -558,6 +559,7 @@ struct qdio_q { } timing; atomic_t busy_siga_counter; unsigned int queue_type; + unsigned int is_pci_out; /* leave this member at the end. won't be cleared in qdio_fill_qs */ struct slib *slib; /* a page is allocated under this pointer, diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c index e10e85e85c84..c358764f3264 100644 --- a/drivers/s390/net/netiucv.c +++ b/drivers/s390/net/netiucv.c @@ -1862,12 +1862,14 @@ static void netiucv_remove_connection(struct iucv_connection *conn) write_lock_bh(&iucv_connection_rwlock); list_del_init(&conn->list); write_unlock_bh(&iucv_connection_rwlock); + fsm_deltimer(&conn->timer); + netiucv_purge_skb_queue(&conn->collect_queue); if (conn->path) { iucv_path_sever(conn->path, iucvMagic); kfree(conn->path); conn->path = NULL; } - fsm_deltimer(&conn->timer); + netiucv_purge_skb_queue(&conn->commit_queue); kfree_fsm(conn->fsm); kfree_skb(conn->rx_buff); kfree_skb(conn->tx_buff); @@ -2115,7 +2117,6 @@ static void __exit netiucv_exit(void) while (!list_empty(&iucv_connection_list)) { cp = list_entry(iucv_connection_list.next, struct iucv_connection, list); - list_del(&cp->list); ndev = cp->netdev; priv = netdev_priv(ndev); dev = priv->dev; diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c index dd7034fbfff8..4640f32daae5 100644 --- a/drivers/s390/net/qeth_eddp.c +++ b/drivers/s390/net/qeth_eddp.c @@ -620,10 +620,10 @@ qeth_eddp_create_context_tcp(struct qeth_card *card, struct sk_buff *skb, struct qeth_eddp_context * qeth_eddp_create_context(struct qeth_card *card, struct sk_buff *skb, - struct qeth_hdr *qhdr) + struct qeth_hdr *qhdr, unsigned char sk_protocol) { QETH_DBF_TEXT(trace, 5, "creddpc"); - switch (skb->sk->sk_protocol){ + switch (sk_protocol) { case IPPROTO_TCP: return qeth_eddp_create_context_tcp(card, skb, qhdr); default: diff --git a/drivers/s390/net/qeth_eddp.h b/drivers/s390/net/qeth_eddp.h index 103768d3bab2..52910c9252c0 100644 --- a/drivers/s390/net/qeth_eddp.h +++ b/drivers/s390/net/qeth_eddp.h @@ -34,7 +34,8 @@ struct qeth_eddp_context_reference { }; extern struct qeth_eddp_context * -qeth_eddp_create_context(struct qeth_card *,struct sk_buff *,struct qeth_hdr *); +qeth_eddp_create_context(struct qeth_card *,struct sk_buff *, + struct qeth_hdr *, unsigned char); extern void qeth_eddp_put_context(struct qeth_eddp_context *); diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 6fd8870551d3..29d176036e5c 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -1682,6 +1682,21 @@ qeth_put_reply(struct qeth_reply *reply) kfree(reply); } +static void +qeth_issue_ipa_msg(struct qeth_ipa_cmd *cmd, struct qeth_card *card) +{ + int rc; + int com; + char * ipa_name; + + com = cmd->hdr.command; + rc = cmd->hdr.return_code; + ipa_name = qeth_get_ipa_cmd_name(com); + + PRINT_ERR("%s(x%X) for %s returned x%X \"%s\"\n", ipa_name, com, + QETH_CARD_IFNAME(card), rc, qeth_get_ipa_msg(rc)); +} + static struct qeth_ipa_cmd * qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) { @@ -1690,8 +1705,11 @@ qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) QETH_DBF_TEXT(trace,5,"chkipad"); if (IS_IPA(iob->data)){ cmd = (struct qeth_ipa_cmd *) PDU_ENCAPSULATION(iob->data); - if (IS_IPA_REPLY(cmd)) + if (IS_IPA_REPLY(cmd)) { + if (cmd->hdr.return_code) + qeth_issue_ipa_msg(cmd, card); return cmd; + } else { switch (cmd->hdr.command) { case IPA_CMD_STOPLAN: @@ -2816,6 +2834,7 @@ qeth_flush_buffers(struct qeth_qdio_out_q *queue, int under_int, struct qeth_qdio_out_buffer *buf; int rc; int i; + unsigned int qdio_flags; QETH_DBF_TEXT(trace, 6, "flushbuf"); @@ -2859,13 +2878,13 @@ qeth_flush_buffers(struct qeth_qdio_out_q *queue, int under_int, queue->card->perf_stats.outbound_do_qdio_start_time = qeth_get_micros(); } + qdio_flags = QDIO_FLAG_SYNC_OUTPUT; if (under_int) - rc = do_QDIO(CARD_DDEV(queue->card), - QDIO_FLAG_SYNC_OUTPUT | QDIO_FLAG_UNDER_INTERRUPT, - queue->queue_no, index, count, NULL); - else - rc = do_QDIO(CARD_DDEV(queue->card), QDIO_FLAG_SYNC_OUTPUT, - queue->queue_no, index, count, NULL); + qdio_flags |= QDIO_FLAG_UNDER_INTERRUPT; + if (atomic_read(&queue->set_pci_flags_count)) + qdio_flags |= QDIO_FLAG_PCI_OUT; + rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags, + queue->queue_no, index, count, NULL); if (queue->card->options.performance_stats) queue->card->perf_stats.outbound_do_qdio_time += qeth_get_micros() - @@ -4490,7 +4509,8 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) qeth_fill_header(card, hdr, new_skb, ipv, cast_type); } if (large_send == QETH_LARGE_SEND_EDDP) { - ctx = qeth_eddp_create_context(card, new_skb, hdr); + ctx = qeth_eddp_create_context(card, new_skb, hdr, + skb->sk->sk_protocol); if (ctx == NULL) { __qeth_free_new_skb(skb, new_skb); PRINT_WARN("could not create eddp context\n"); @@ -5948,9 +5968,6 @@ qeth_layer2_send_setmac_cb(struct qeth_card *card, cmd = (struct qeth_ipa_cmd *) data; if (cmd->hdr.return_code) { QETH_DBF_TEXT_(trace, 2, "L2er%x", cmd->hdr.return_code); - PRINT_WARN("Error in registering MAC address on " \ - "device %s: x%x\n", CARD_BUS_ID(card), - cmd->hdr.return_code); card->info.mac_bits &= ~QETH_LAYER2_MAC_REGISTERED; cmd->hdr.return_code = -EIO; } else { @@ -5985,9 +6002,6 @@ qeth_layer2_send_delmac_cb(struct qeth_card *card, QETH_DBF_TEXT(trace, 2, "L2Dmaccb"); cmd = (struct qeth_ipa_cmd *) data; if (cmd->hdr.return_code) { - PRINT_WARN("Error in deregistering MAC address on " \ - "device %s: x%x\n", CARD_BUS_ID(card), - cmd->hdr.return_code); QETH_DBF_TEXT_(trace, 2, "err%d", cmd->hdr.return_code); cmd->hdr.return_code = -EIO; return 0; @@ -6651,7 +6665,7 @@ qeth_setadpparms_change_macaddr_cb(struct qeth_card *card, QETH_DBF_TEXT(trace,4,"chgmaccb"); cmd = (struct qeth_ipa_cmd *) data; - if (!card->options.layer2 || card->info.guestlan || + if (!card->options.layer2 || !(card->info.mac_bits & QETH_LAYER2_MAC_READ)) { memcpy(card->dev->dev_addr, &cmd->data.setadapterparms.data.change_addr.addr, @@ -8497,6 +8511,7 @@ __qeth_reboot_event_card(struct device *dev, void *data) card = (struct qeth_card *) dev->driver_data; qeth_clear_ip_list(card, 0, 0); qeth_qdio_clear_card(card, 0); + qeth_clear_qdio_buffers(card); return 0; } diff --git a/drivers/s390/net/qeth_mpc.c b/drivers/s390/net/qeth_mpc.c index 77c83209d70e..f54fdfdbf06f 100644 --- a/drivers/s390/net/qeth_mpc.c +++ b/drivers/s390/net/qeth_mpc.c @@ -157,12 +157,113 @@ unsigned char READ_CCW[]={ }; +struct ipa_rc_msg { + enum qeth_ipa_return_codes rc; + char *msg; +}; +struct ipa_rc_msg qeth_ipa_rc_msg[] = { + {IPA_RC_SUCCESS, "success"}, + {IPA_RC_NOTSUPP, "Command not supported"}, + {IPA_RC_IP_TABLE_FULL, "Add Addr IP Table Full - ipv6"}, + {IPA_RC_UNKNOWN_ERROR, "IPA command failed - reason unknown"}, + {IPA_RC_UNSUPPORTED_COMMAND, "Command not supported"}, + {IPA_RC_DUP_IPV6_REMOTE,"ipv6 address already registered remote"}, + {IPA_RC_DUP_IPV6_HOME, "ipv6 address already registered"}, + {IPA_RC_UNREGISTERED_ADDR, "Address not registered"}, + {IPA_RC_NO_ID_AVAILABLE, "No identifiers available"}, + {IPA_RC_ID_NOT_FOUND, "Identifier not found"}, + {IPA_RC_INVALID_IP_VERSION, "IP version incorrect"}, + {IPA_RC_LAN_FRAME_MISMATCH, "LAN and frame mismatch"}, + {IPA_RC_L2_UNSUPPORTED_CMD, "Unsupported layer 2 command"}, + {IPA_RC_L2_DUP_MAC, "Duplicate MAC address"}, + {IPA_RC_L2_ADDR_TABLE_FULL, "Layer2 address table full"}, + {IPA_RC_L2_DUP_LAYER3_MAC, "Duplicate with layer 3 MAC"}, + {IPA_RC_L2_GMAC_NOT_FOUND, "GMAC not found"}, + {IPA_RC_L2_MAC_NOT_FOUND, "L2 mac address not found"}, + {IPA_RC_L2_INVALID_VLAN_ID, "L2 invalid vlan id"}, + {IPA_RC_L2_DUP_VLAN_ID, "L2 duplicate vlan id"}, + {IPA_RC_L2_VLAN_ID_NOT_FOUND, "L2 vlan id not found"}, + {IPA_RC_DATA_MISMATCH, "Data field mismatch (v4/v6 mixed)"}, + {IPA_RC_INVALID_MTU_SIZE, "Invalid MTU size"}, + {IPA_RC_INVALID_LANTYPE, "Invalid LAN type"}, + {IPA_RC_INVALID_LANNUM, "Invalid LAN num"}, + {IPA_RC_DUPLICATE_IP_ADDRESS, "Address already registered"}, + {IPA_RC_IP_ADDR_TABLE_FULL, "IP address table full"}, + {IPA_RC_LAN_PORT_STATE_ERROR, "LAN port state error"}, + {IPA_RC_SETIP_NO_STARTLAN, "Setip no startlan received"}, + {IPA_RC_SETIP_ALREADY_RECEIVED, "Setip already received"}, + {IPA_RC_IP_ADDR_ALREADY_USED, "IP address already in use on LAN"}, + {IPA_RC_MULTICAST_FULL, "No task available, multicast full"}, + {IPA_RC_SETIP_INVALID_VERSION, "SETIP invalid IP version"}, + {IPA_RC_UNSUPPORTED_SUBCMD, "Unsupported assist subcommand"}, + {IPA_RC_ARP_ASSIST_NO_ENABLE, "Only partial success, no enable"}, + {IPA_RC_PRIMARY_ALREADY_DEFINED,"Primary already defined"}, + {IPA_RC_SECOND_ALREADY_DEFINED, "Secondary already defined"}, + {IPA_RC_INVALID_SETRTG_INDICATOR,"Invalid SETRTG indicator"}, + {IPA_RC_MC_ADDR_ALREADY_DEFINED,"Multicast address already defined"}, + {IPA_RC_LAN_OFFLINE, "STRTLAN_LAN_DISABLED - LAN offline"}, + {IPA_RC_INVALID_IP_VERSION2, "Invalid IP version"}, + {IPA_RC_FFFF, "Unknown Error"} +}; +char * +qeth_get_ipa_msg(enum qeth_ipa_return_codes rc) +{ + int x = 0; + qeth_ipa_rc_msg[sizeof(qeth_ipa_rc_msg) / + sizeof(struct ipa_rc_msg) - 1].rc = rc; + while(qeth_ipa_rc_msg[x].rc != rc) + x++; + return qeth_ipa_rc_msg[x].msg; +} +struct ipa_cmd_names { + enum qeth_ipa_cmds cmd; + char *name; +}; + +struct ipa_cmd_names qeth_ipa_cmd_names[] = { + {IPA_CMD_STARTLAN, "startlan"}, + {IPA_CMD_STOPLAN, "stoplan"}, + {IPA_CMD_SETVMAC, "setvmac"}, + {IPA_CMD_DELVMAC, "delvmca"}, + {IPA_CMD_SETGMAC, "setgmac"}, + {IPA_CMD_DELGMAC, "delgmac"}, + {IPA_CMD_SETVLAN, "setvlan"}, + {IPA_CMD_DELVLAN, "delvlan"}, + {IPA_CMD_SETCCID, "setccid"}, + {IPA_CMD_DELCCID, "delccid"}, + {IPA_CMD_MODCCID, "setip"}, + {IPA_CMD_SETIP, "setip"}, + {IPA_CMD_QIPASSIST, "qipassist"}, + {IPA_CMD_SETASSPARMS, "setassparms"}, + {IPA_CMD_SETIPM, "setipm"}, + {IPA_CMD_DELIPM, "delipm"}, + {IPA_CMD_SETRTG, "setrtg"}, + {IPA_CMD_DELIP, "delip"}, + {IPA_CMD_SETADAPTERPARMS, "setadapterparms"}, + {IPA_CMD_SET_DIAG_ASS, "set_diag_ass"}, + {IPA_CMD_CREATE_ADDR, "create_addr"}, + {IPA_CMD_DESTROY_ADDR, "destroy_addr"}, + {IPA_CMD_REGISTER_LOCAL_ADDR, "register_local_addr"}, + {IPA_CMD_UNREGISTER_LOCAL_ADDR, "unregister_local_addr"}, + {IPA_CMD_UNKNOWN, "unknown"}, +}; +char * +qeth_get_ipa_cmd_name(enum qeth_ipa_cmds cmd) +{ + int x = 0; + qeth_ipa_cmd_names[ + sizeof(qeth_ipa_cmd_names)/ + sizeof(struct ipa_cmd_names)-1].cmd = cmd; + while(qeth_ipa_cmd_names[x].cmd != cmd) + x++; + return qeth_ipa_cmd_names[x].name; +} diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h index d74bc43da72a..1d8083c91765 100644 --- a/drivers/s390/net/qeth_mpc.h +++ b/drivers/s390/net/qeth_mpc.h @@ -25,14 +25,14 @@ extern unsigned char IPA_PDU_HEADER[]; #define IPA_CMD_LENGTH (IPA_PDU_HEADER_SIZE + sizeof(struct qeth_ipa_cmd)) -#define QETH_SEQ_NO_LENGTH 4 -#define QETH_MPC_TOKEN_LENGTH 4 +#define QETH_SEQ_NO_LENGTH 4 +#define QETH_MPC_TOKEN_LENGTH 4 #define QETH_MCL_LENGTH 4 #define OSA_ADDR_LEN 6 -#define QETH_TIMEOUT (10 * HZ) -#define QETH_IPA_TIMEOUT (45 * HZ) -#define QETH_IDX_COMMAND_SEQNO 0xffff0000 +#define QETH_TIMEOUT (10 * HZ) +#define QETH_IPA_TIMEOUT (45 * HZ) +#define QETH_IDX_COMMAND_SEQNO 0xffff0000 #define SR_INFO_LEN 16 #define QETH_CLEAR_CHANNEL_PARM -10 @@ -93,79 +93,107 @@ enum qeth_checksum_types { */ #define RESET_ROUTING_FLAG 0x10 /* indicate that routing type shall be set */ enum qeth_routing_types { - NO_ROUTER = 0, /* TODO: set to bit flag used in IPA Command */ - PRIMARY_ROUTER = 1, - SECONDARY_ROUTER = 2, - MULTICAST_ROUTER = 3, - PRIMARY_CONNECTOR = 4, - SECONDARY_CONNECTOR = 5, + NO_ROUTER = 0, /* TODO: set to bit flag used in IPA Command */ + PRIMARY_ROUTER = 1, + SECONDARY_ROUTER = 2, + MULTICAST_ROUTER = 3, + PRIMARY_CONNECTOR = 4, + SECONDARY_CONNECTOR = 5, }; - /* IPA Commands */ enum qeth_ipa_cmds { - IPA_CMD_STARTLAN = 0x01, - IPA_CMD_STOPLAN = 0x02, - IPA_CMD_SETVMAC = 0x21, - IPA_CMD_DELVMAC = 0x22, - IPA_CMD_SETGMAC = 0x23, - IPA_CMD_DELGMAC = 0x24, - IPA_CMD_SETVLAN = 0x25, - IPA_CMD_DELVLAN = 0x26, - IPA_CMD_SETCCID = 0x41, - IPA_CMD_DELCCID = 0x42, - IPA_CMD_MODCCID = 0x43, - IPA_CMD_SETIP = 0xb1, - IPA_CMD_DELIP = 0xb7, - IPA_CMD_QIPASSIST = 0xb2, - IPA_CMD_SETASSPARMS = 0xb3, - IPA_CMD_SETIPM = 0xb4, - IPA_CMD_DELIPM = 0xb5, - IPA_CMD_SETRTG = 0xb6, - IPA_CMD_SETADAPTERPARMS = 0xb8, - IPA_CMD_IPFRAME = 0xb9, - IPA_CMD_ADD_ADDR_ENTRY = 0xc1, - IPA_CMD_DELETE_ADDR_ENTRY = 0xc2, - IPA_CMD_CREATE_ADDR = 0xc3, - IPA_CMD_DESTROY_ADDR = 0xc4, - IPA_CMD_REGISTER_LOCAL_ADDR = 0xd1, - IPA_CMD_UNREGISTER_LOCAL_ADDR = 0xd2, + IPA_CMD_STARTLAN = 0x01, + IPA_CMD_STOPLAN = 0x02, + IPA_CMD_SETVMAC = 0x21, + IPA_CMD_DELVMAC = 0x22, + IPA_CMD_SETGMAC = 0x23, + IPA_CMD_DELGMAC = 0x24, + IPA_CMD_SETVLAN = 0x25, + IPA_CMD_DELVLAN = 0x26, + IPA_CMD_SETCCID = 0x41, + IPA_CMD_DELCCID = 0x42, + IPA_CMD_MODCCID = 0x43, + IPA_CMD_SETIP = 0xb1, + IPA_CMD_QIPASSIST = 0xb2, + IPA_CMD_SETASSPARMS = 0xb3, + IPA_CMD_SETIPM = 0xb4, + IPA_CMD_DELIPM = 0xb5, + IPA_CMD_SETRTG = 0xb6, + IPA_CMD_DELIP = 0xb7, + IPA_CMD_SETADAPTERPARMS = 0xb8, + IPA_CMD_SET_DIAG_ASS = 0xb9, + IPA_CMD_CREATE_ADDR = 0xc3, + IPA_CMD_DESTROY_ADDR = 0xc4, + IPA_CMD_REGISTER_LOCAL_ADDR = 0xd1, + IPA_CMD_UNREGISTER_LOCAL_ADDR = 0xd2, + IPA_CMD_UNKNOWN = 0x00 }; enum qeth_ip_ass_cmds { IPA_CMD_ASS_START = 0x0001, IPA_CMD_ASS_STOP = 0x0002, - IPA_CMD_ASS_CONFIGURE = 0x0003, - IPA_CMD_ASS_ENABLE = 0x0004, + IPA_CMD_ASS_CONFIGURE = 0x0003, + IPA_CMD_ASS_ENABLE = 0x0004, }; enum qeth_arp_process_subcmds { - IPA_CMD_ASS_ARP_SET_NO_ENTRIES = 0x0003, - IPA_CMD_ASS_ARP_QUERY_CACHE = 0x0004, - IPA_CMD_ASS_ARP_ADD_ENTRY = 0x0005, - IPA_CMD_ASS_ARP_REMOVE_ENTRY = 0x0006, - IPA_CMD_ASS_ARP_FLUSH_CACHE = 0x0007, - IPA_CMD_ASS_ARP_QUERY_INFO = 0x0104, - IPA_CMD_ASS_ARP_QUERY_STATS = 0x0204, + IPA_CMD_ASS_ARP_SET_NO_ENTRIES = 0x0003, + IPA_CMD_ASS_ARP_QUERY_CACHE = 0x0004, + IPA_CMD_ASS_ARP_ADD_ENTRY = 0x0005, + IPA_CMD_ASS_ARP_REMOVE_ENTRY = 0x0006, + IPA_CMD_ASS_ARP_FLUSH_CACHE = 0x0007, + IPA_CMD_ASS_ARP_QUERY_INFO = 0x0104, + IPA_CMD_ASS_ARP_QUERY_STATS = 0x0204, }; -/* Return Codes for IPA Commands */ + +/* Return Codes for IPA Commands + * according to OSA card Specs */ + enum qeth_ipa_return_codes { - IPA_RC_SUCCESS = 0x0000, - IPA_RC_NOTSUPP = 0x0001, - IPA_RC_NO_ACCESS = 0x0002, - IPA_RC_FAILED = 0x0003, - IPA_RC_DATA_MISMATCH = 0xe001, - IPA_RC_INVALID_LAN_TYPE = 0xe003, - IPA_RC_INVALID_LAN_NO = 0xe004, - IPA_RC_IPADDR_ALREADY_REG = 0xe005, - IPA_RC_IPADDR_TABLE_FULL = 0xe006, - IPA_RC_IPADDR_ALREADY_USED = 0xe00a, - IPA_RC_ASSNO_NOT_SUPP = 0xe00d, - IPA_RC_ASSCMD_START_FAILED = 0xe00e, - IPA_RC_ASSCMD_PART_SUCCESS = 0xe00f, - IPA_RC_IPADDR_NOT_DEFINED = 0xe010, - IPA_RC_LAN_OFFLINE = 0xe080, + IPA_RC_SUCCESS = 0x0000, + IPA_RC_NOTSUPP = 0x0001, + IPA_RC_IP_TABLE_FULL = 0x0002, + IPA_RC_UNKNOWN_ERROR = 0x0003, + IPA_RC_UNSUPPORTED_COMMAND = 0x0004, + IPA_RC_DUP_IPV6_REMOTE = 0x0008, + IPA_RC_DUP_IPV6_HOME = 0x0010, + IPA_RC_UNREGISTERED_ADDR = 0x0011, + IPA_RC_NO_ID_AVAILABLE = 0x0012, + IPA_RC_ID_NOT_FOUND = 0x0013, + IPA_RC_INVALID_IP_VERSION = 0x0020, + IPA_RC_LAN_FRAME_MISMATCH = 0x0040, + IPA_RC_L2_UNSUPPORTED_CMD = 0x2003, + IPA_RC_L2_DUP_MAC = 0x2005, + IPA_RC_L2_ADDR_TABLE_FULL = 0x2006, + IPA_RC_L2_DUP_LAYER3_MAC = 0x200a, + IPA_RC_L2_GMAC_NOT_FOUND = 0x200b, + IPA_RC_L2_MAC_NOT_FOUND = 0x2010, + IPA_RC_L2_INVALID_VLAN_ID = 0x2015, + IPA_RC_L2_DUP_VLAN_ID = 0x2016, + IPA_RC_L2_VLAN_ID_NOT_FOUND = 0x2017, + IPA_RC_DATA_MISMATCH = 0xe001, + IPA_RC_INVALID_MTU_SIZE = 0xe002, + IPA_RC_INVALID_LANTYPE = 0xe003, + IPA_RC_INVALID_LANNUM = 0xe004, + IPA_RC_DUPLICATE_IP_ADDRESS = 0xe005, + IPA_RC_IP_ADDR_TABLE_FULL = 0xe006, + IPA_RC_LAN_PORT_STATE_ERROR = 0xe007, + IPA_RC_SETIP_NO_STARTLAN = 0xe008, + IPA_RC_SETIP_ALREADY_RECEIVED = 0xe009, + IPA_RC_IP_ADDR_ALREADY_USED = 0xe00a, + IPA_RC_MULTICAST_FULL = 0xe00b, + IPA_RC_SETIP_INVALID_VERSION = 0xe00d, + IPA_RC_UNSUPPORTED_SUBCMD = 0xe00e, + IPA_RC_ARP_ASSIST_NO_ENABLE = 0xe00f, + IPA_RC_PRIMARY_ALREADY_DEFINED = 0xe010, + IPA_RC_SECOND_ALREADY_DEFINED = 0xe011, + IPA_RC_INVALID_SETRTG_INDICATOR = 0xe012, + IPA_RC_MC_ADDR_ALREADY_DEFINED = 0xe013, + IPA_RC_LAN_OFFLINE = 0xe080, + IPA_RC_INVALID_IP_VERSION2 = 0xf001, + IPA_RC_FFFF = 0xffff }; /* IPA function flags; each flag marks availability of respective function */ @@ -183,7 +211,9 @@ enum qeth_ipa_funcs { IPA_SETADAPTERPARMS = 0x00000400L, IPA_VLAN_PRIO = 0x00000800L, IPA_PASSTHRU = 0x00001000L, + IPA_FLUSH_ARP_SUPPORT = 0x00002000L, IPA_FULL_VLAN = 0x00004000L, + IPA_INBOUND_PASSTHRU = 0x00008000L, IPA_SOURCE_MAC = 0x00010000L, IPA_OSA_MC_ROUTER = 0x00020000L, IPA_QUERY_ARP_ASSIST = 0x00040000L, @@ -204,31 +234,30 @@ enum qeth_ipa_setdelip_flags { /* SETADAPTER IPA Command: ****************************************************/ enum qeth_ipa_setadp_cmd { IPA_SETADP_QUERY_COMMANDS_SUPPORTED = 0x01, - IPA_SETADP_ALTER_MAC_ADDRESS = 0x02, - IPA_SETADP_ADD_DELETE_GROUP_ADDRESS = 0x04, - IPA_SETADP_ADD_DELETE_FUNCTIONAL_ADDR = 0x08, - IPA_SETADP_SET_ADDRESSING_MODE = 0x10, - IPA_SETADP_SET_CONFIG_PARMS = 0x20, - IPA_SETADP_SET_CONFIG_PARMS_EXTENDED = 0x40, - IPA_SETADP_SET_BROADCAST_MODE = 0x80, - IPA_SETADP_SEND_OSA_MESSAGE = 0x0100, - IPA_SETADP_SET_SNMP_CONTROL = 0x0200, - IPA_SETADP_READ_SNMP_PARMS = 0x0400, + IPA_SETADP_ALTER_MAC_ADDRESS = 0x02, + IPA_SETADP_ADD_DELETE_GROUP_ADDRESS = 0x04, + IPA_SETADP_ADD_DELETE_FUNCTIONAL_ADDR = 0x08, + IPA_SETADP_SET_ADDRESSING_MODE = 0x10, + IPA_SETADP_SET_CONFIG_PARMS = 0x20, + IPA_SETADP_SET_CONFIG_PARMS_EXTENDED = 0x40, + IPA_SETADP_SET_BROADCAST_MODE = 0x80, + IPA_SETADP_SEND_OSA_MESSAGE = 0x0100, + IPA_SETADP_SET_SNMP_CONTROL = 0x0200, + IPA_SETADP_QUERY_CARD_INFO = 0x0400, IPA_SETADP_SET_PROMISC_MODE = 0x0800, - IPA_SETADP_QUERY_CARD_INFO = 0x1000, }; enum qeth_ipa_mac_ops { - CHANGE_ADDR_READ_MAC = 0, - CHANGE_ADDR_REPLACE_MAC = 1, - CHANGE_ADDR_ADD_MAC = 2, - CHANGE_ADDR_DEL_MAC = 4, - CHANGE_ADDR_RESET_MAC = 8, + CHANGE_ADDR_READ_MAC = 0, + CHANGE_ADDR_REPLACE_MAC = 1, + CHANGE_ADDR_ADD_MAC = 2, + CHANGE_ADDR_DEL_MAC = 4, + CHANGE_ADDR_RESET_MAC = 8, }; enum qeth_ipa_addr_ops { - CHANGE_ADDR_READ_ADDR = 0, - CHANGE_ADDR_ADD_ADDR = 1, - CHANGE_ADDR_DEL_ADDR = 2, - CHANGE_ADDR_FLUSH_ADDR_TABLE = 4, + CHANGE_ADDR_READ_ADDR = 0, + CHANGE_ADDR_ADD_ADDR = 1, + CHANGE_ADDR_DEL_ADDR = 2, + CHANGE_ADDR_FLUSH_ADDR_TABLE = 4, }; enum qeth_ipa_promisc_modes { SET_PROMISC_MODE_OFF = 0, @@ -407,15 +436,15 @@ struct qeth_ipacmd_hdr { struct qeth_ipa_cmd { struct qeth_ipacmd_hdr hdr; union { - struct qeth_ipacmd_setdelip4 setdelip4; - struct qeth_ipacmd_setdelip6 setdelip6; + struct qeth_ipacmd_setdelip4 setdelip4; + struct qeth_ipacmd_setdelip6 setdelip6; struct qeth_ipacmd_setdelipm setdelipm; - struct qeth_ipacmd_setassparms setassparms; - struct qeth_ipacmd_layer2setdelmac setdelmac; - struct qeth_ipacmd_layer2setdelvlan setdelvlan; - struct qeth_create_destroy_address create_destroy_addr; - struct qeth_ipacmd_setadpparms setadapterparms; - struct qeth_set_routing setrtg; + struct qeth_ipacmd_setassparms setassparms; + struct qeth_ipacmd_layer2setdelmac setdelmac; + struct qeth_ipacmd_layer2setdelvlan setdelvlan; + struct qeth_create_destroy_address create_destroy_addr; + struct qeth_ipacmd_setadpparms setadapterparms; + struct qeth_set_routing setrtg; } data; } __attribute__ ((packed)); @@ -433,6 +462,12 @@ enum qeth_ipa_arp_return_codes { QETH_IPA_ARP_RC_Q_NO_DATA = 0x0008, }; + +extern char * +qeth_get_ipa_msg(enum qeth_ipa_return_codes rc); +extern char * +qeth_get_ipa_cmd_name(enum qeth_ipa_cmds cmd); + #define QETH_SETASS_BASE_LEN (sizeof(struct qeth_ipacmd_hdr) + \ sizeof(struct qeth_ipacmd_setassparms_hdr)) #define QETH_IPA_ARP_DATA_POS(buffer) (buffer + IPA_PDU_HEADER_SIZE + \ @@ -521,7 +556,7 @@ extern unsigned char DM_ACT[]; extern unsigned char IDX_ACTIVATE_READ[]; extern unsigned char IDX_ACTIVATE_WRITE[]; -#define IDX_ACTIVATE_SIZE 0x22 +#define IDX_ACTIVATE_SIZE 0x22 #define QETH_IDX_ACT_ISSUER_RM_TOKEN(buffer) (buffer+0x0c) #define QETH_IDX_NO_PORTNAME_REQUIRED(buffer) ((buffer)[0x0b]&0x80) #define QETH_IDX_ACT_FUNC_LEVEL(buffer) (buffer+0x10) diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c index d518419cd0c6..65ffc21afc37 100644 --- a/drivers/s390/net/qeth_sys.c +++ b/drivers/s390/net/qeth_sys.c @@ -384,8 +384,6 @@ qeth_dev_route_store(struct qeth_card *card, struct qeth_routing_info *route, route->type = PRIMARY_CONNECTOR; } else if (!strcmp(tmp, "secondary_connector")) { route->type = SECONDARY_CONNECTOR; - } else if (!strcmp(tmp, "multicast_router")) { - route->type = MULTICAST_ROUTER; } else if (!strcmp(tmp, "primary_router")) { route->type = PRIMARY_ROUTER; } else if (!strcmp(tmp, "secondary_router")) { diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c index a39ee80c9715..74b999d77bbf 100644 --- a/drivers/sbus/char/bpp.c +++ b/drivers/sbus/char/bpp.c @@ -15,7 +15,6 @@ #include <linux/fs.h> #include <linux/errno.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/spinlock.h> #include <linux/timer.h> #include <linux/ioport.h> diff --git a/drivers/sbus/char/rtc.c b/drivers/sbus/char/rtc.c index 94d185829119..18d18f1a114e 100644 --- a/drivers/sbus/char/rtc.c +++ b/drivers/sbus/char/rtc.c @@ -19,7 +19,6 @@ #include <linux/fcntl.h> #include <linux/poll.h> #include <linux/init.h> -#include <linux/smp_lock.h> #include <asm/io.h> #include <asm/mostek.h> #include <asm/system.h> diff --git a/drivers/sbus/char/vfc_dev.c b/drivers/sbus/char/vfc_dev.c index c3135e2fbd5a..6afc7e5df0d4 100644 --- a/drivers/sbus/char/vfc_dev.c +++ b/drivers/sbus/char/vfc_dev.c @@ -20,7 +20,6 @@ #include <linux/slab.h> #include <linux/errno.h> #include <linux/fs.h> -#include <linux/smp_lock.h> #include <linux/delay.h> #include <linux/spinlock.h> #include <linux/mm.h> diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.h b/drivers/scsi/aic7xxx/aic79xx_osm.h index 9218f29314fa..ad9761b237dc 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.h +++ b/drivers/scsi/aic7xxx/aic79xx_osm.h @@ -47,7 +47,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/pci.h> -#include <linux/smp_lock.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/slab.h> diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.h b/drivers/scsi/aic7xxx/aic7xxx_osm.h index 85ae5d836fa4..8fee7edc6eb3 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.h +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.h @@ -64,7 +64,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/pci.h> -#include <linux/smp_lock.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/slab.h> diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index f7b9dbd64a96..fb6433a56989 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -55,7 +55,6 @@ MODULE_DESCRIPTION("Adaptec I2O RAID Driver"); #include <linux/sched.h> #include <linux/reboot.h> #include <linux/spinlock.h> -#include <linux/smp_lock.h> #include <linux/dma-mapping.h> #include <linux/timer.h> diff --git a/drivers/scsi/ibmvscsi/ibmvstgt.c b/drivers/scsi/ibmvscsi/ibmvstgt.c index 6d223dd76440..8ba7dd09d01d 100644 --- a/drivers/scsi/ibmvscsi/ibmvstgt.c +++ b/drivers/scsi/ibmvscsi/ibmvstgt.c @@ -892,16 +892,16 @@ static int get_system_info(void) if (!rootdn) return -ENOENT; - model = get_property(rootdn, "model", NULL); - id = get_property(rootdn, "system-id", NULL); + model = of_get_property(rootdn, "model", NULL); + id = of_get_property(rootdn, "system-id", NULL); if (model && id) snprintf(system_id, sizeof(system_id), "%s-%s", model, id); - name = get_property(rootdn, "ibm,partition-name", NULL); + name = of_get_property(rootdn, "ibm,partition-name", NULL); if (name) strncpy(partition_name, name, sizeof(partition_name)); - num = get_property(rootdn, "ibm,partition-no", NULL); + num = of_get_property(rootdn, "ibm,partition-no", NULL); if (num) partition_number = *num; diff --git a/drivers/scsi/ibmvscsi/rpa_vscsi.c b/drivers/scsi/ibmvscsi/rpa_vscsi.c index 0a533f398f52..d8700aaa6114 100644 --- a/drivers/scsi/ibmvscsi/rpa_vscsi.c +++ b/drivers/scsi/ibmvscsi/rpa_vscsi.c @@ -162,11 +162,11 @@ static void gather_partition_info(void) return; } - ppartition_name = get_property(rootdn, "ibm,partition-name", NULL); + ppartition_name = of_get_property(rootdn, "ibm,partition-name", NULL); if (ppartition_name) strncpy(partition_name, ppartition_name, sizeof(partition_name)); - p_number_ptr = get_property(rootdn, "ibm,partition-no", NULL); + p_number_ptr = of_get_property(rootdn, "ibm,partition-no", NULL); if (p_number_ptr) partition_number = *p_number_ptr; of_node_put(rootdn); diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c index 753d88306cd1..5806ede120a4 100644 --- a/drivers/scsi/mac53c94.c +++ b/drivers/scsi/mac53c94.c @@ -471,7 +471,7 @@ static int mac53c94_probe(struct macio_dev *mdev, const struct of_device_id *mat goto out_free; } - clkprop = get_property(node, "clock-frequency", &proplen); + clkprop = of_get_property(node, "clock-frequency", &proplen); if (clkprop == NULL || proplen != sizeof(int)) { printk(KERN_ERR "%s: can't get clock frequency, " "assuming 25MHz\n", node->full_name); diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index 1fd3c7590d31..cf3666d7d97a 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -1947,7 +1947,7 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match) ms->tgts[tgt].current_req = NULL; } - if ((cfp = get_property(mesh, "clock-frequency", NULL))) + if ((cfp = of_get_property(mesh, "clock-frequency", NULL))) ms->clk_freq = *cfp; else { printk(KERN_INFO "mesh: assuming 50MHz clock frequency\n"); diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 3e2930b7ee23..06229f225ee9 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -36,7 +36,6 @@ #include <linux/fs.h> #include <linux/init.h> #include <linux/proc_fs.h> -#include <linux/smp_lock.h> #include <linux/vmalloc.h> #include <linux/moduleparam.h> diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 570977cf9efb..0c691a60a756 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -41,7 +41,6 @@ static int sg_version_num = 30534; /* 2 digits for each component */ #include <linux/fcntl.h> #include <linux/init.h> #include <linux/poll.h> -#include <linux/smp_lock.h> #include <linux/moduleparam.h> #include <linux/cdev.h> #include <linux/seq_file.h> diff --git a/drivers/scsi/sni_53c710.c b/drivers/scsi/sni_53c710.c index 6bc505115841..a7dfb65fb842 100644 --- a/drivers/scsi/sni_53c710.c +++ b/drivers/scsi/sni_53c710.c @@ -98,7 +98,7 @@ static int __init snirm710_probe(struct platform_device *dev) host->this_id = 7; host->base = base; host->irq = platform_get_irq(dev, 0); - if(request_irq(host->irq, NCR_700_intr, SA_SHIRQ, "snirm710", host)) { + if(request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "snirm710", host)) { printk(KERN_ERR "snirm710: request_irq failed!\n"); goto out_put_host; } diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index c9832d963f1e..48e259a0167d 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -994,7 +994,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) * be frobbing the chips IRQ enable register to see if it exists. */ spin_lock_irqsave(&up->port.lock, flags); -// save_flags(flags); cli(); up->capabilities = 0; up->bugs = 0; @@ -1151,7 +1150,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) out: spin_unlock_irqrestore(&up->port.lock, flags); -// restore_flags(flags); DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); } diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 924e9bd757f0..e8efe938c4e7 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -73,17 +73,21 @@ config SERIAL_8250_PCI depends on SERIAL_8250 && PCI default SERIAL_8250 help - This builds standard PCI serial support. You may be able to - disable this feature if you only need legacy serial support. - Saves about 9K. + Say Y here if you have PCI serial ports. + + To compile this driver as a module, choose M here: the module + will be called 8250_pci. config SERIAL_8250_PNP tristate "8250/16550 PNP device support" if EMBEDDED depends on SERIAL_8250 && PNP default SERIAL_8250 help - This builds standard PNP serial support. You may be able to - disable this feature if you only need legacy serial support. + Say Y here if you have serial ports described by PNPBIOS or ACPI. + These are typically ports built into the system board. + + To compile this driver as a module, choose M here: the module + will be called 8250_pnp. config SERIAL_8250_HP300 tristate diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 7a3b97fdf8d1..f23972bc00c0 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -934,7 +934,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .irq = SMC1_IRQ, .ops = &cpm_uart_pops, .iotype = UPIO_MEM, - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SMC1].port.lock), }, .flags = FLAG_SMC, .tx_nrfifos = TX_NUM_FIFO, @@ -948,7 +948,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .irq = SMC2_IRQ, .ops = &cpm_uart_pops, .iotype = UPIO_MEM, - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SMC2].port.lock), }, .flags = FLAG_SMC, .tx_nrfifos = TX_NUM_FIFO, @@ -965,7 +965,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .irq = SCC1_IRQ, .ops = &cpm_uart_pops, .iotype = UPIO_MEM, - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC1].port.lock), }, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, @@ -979,7 +979,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .irq = SCC2_IRQ, .ops = &cpm_uart_pops, .iotype = UPIO_MEM, - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC2].port.lock), }, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, @@ -993,7 +993,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .irq = SCC3_IRQ, .ops = &cpm_uart_pops, .iotype = UPIO_MEM, - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC3].port.lock), }, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, @@ -1007,7 +1007,7 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = { .irq = SCC4_IRQ, .ops = &cpm_uart_pops, .iotype = UPIO_MEM, - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(cpm_uart_ports[UART_SCC4].port.lock), }, .tx_nrfifos = TX_NUM_FIFO, .tx_fifosize = TX_BUF_SIZE, diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 246c5572667b..6202995e8211 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -47,7 +47,6 @@ #include <linux/pci.h> #include <linux/vmalloc.h> #include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/spinlock.h> #include <linux/kobject.h> #include <linux/firmware.h> diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c index 8be8da37f629..b2d6f5b1a7c2 100644 --- a/drivers/serial/jsm/jsm_neo.c +++ b/drivers/serial/jsm/jsm_neo.c @@ -581,8 +581,13 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals) return; /* Scrub off lower bits. They signify delta's, which I don't care about */ - msignals &= 0xf0; + /* Keep DDCD and DDSR though */ + msignals &= 0xf8; + if (msignals & UART_MSR_DDCD) + uart_handle_dcd_change(&ch->uart_port, msignals & UART_MSR_DCD); + if (msignals & UART_MSR_DDSR) + uart_handle_cts_change(&ch->uart_port, msignals & UART_MSR_CTS); if (msignals & UART_MSR_DCD) ch->ch_mistat |= UART_MSR_DCD; else diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index be22bbdbc8e5..281f23a371b2 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -448,6 +448,7 @@ int jsm_uart_port_init(struct jsm_board *brd) continue; brd->channels[i]->uart_port.irq = brd->irq; + brd->channels[i]->uart_port.uartclk = 14745600; brd->channels[i]->uart_port.type = PORT_JSM; brd->channels[i]->uart_port.iotype = UPIO_MEM; brd->channels[i]->uart_port.membase = brd->re_map_membase; diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 8d24cd521056..35f8b86cc78f 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -257,9 +257,10 @@ mpc52xx_uart_shutdown(struct uart_port *port) { struct mpc52xx_psc __iomem *psc = PSC(port); - /* Shut down the port, interrupt and all */ + /* Shut down the port. Leave TX active if on a console port */ out_8(&psc->command,MPC52xx_PSC_RST_RX); - out_8(&psc->command,MPC52xx_PSC_RST_TX); + if (!uart_console(port)) + out_8(&psc->command,MPC52xx_PSC_RST_TX); port->read_status_mask = 0; out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask); @@ -1069,7 +1070,7 @@ mpc52xx_uart_of_enumerate(void) continue; /* Is a particular device number requested? */ - devno = get_property(np, "port-number", NULL); + devno = of_get_property(np, "port-number", NULL); mpc52xx_uart_of_assign(of_node_get(np), devno ? *devno : -1); } diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index 336d0f4580d9..7ffdaeaf0545 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -29,8 +29,8 @@ static int __devinit of_platform_serial_setup(struct of_device *ofdev, int ret; memset(port, 0, sizeof *port); - spd = get_property(np, "current-speed", NULL); - clk = get_property(np, "clock-frequency", NULL); + spd = of_get_property(np, "current-speed", NULL); + clk = of_get_property(np, "clock-frequency", NULL); if (!clk) { dev_warn(&ofdev->dev, "no clock-frequency property set\n"); return -ENODEV; diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index be8d75721a85..0fa9f6761763 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -1450,14 +1450,14 @@ no_dma: /* * Detect port type */ - if (device_is_compatible(np, "cobalt")) + if (of_device_is_compatible(np, "cobalt")) uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; - conn = get_property(np, "AAPL,connector", &len); + conn = of_get_property(np, "AAPL,connector", &len); if (conn && (strcmp(conn, "infrared") == 0)) uap->flags |= PMACZILOG_FLAG_IS_IRDA; uap->port_type = PMAC_SCC_ASYNC; /* 1999 Powerbook G3 has slot-names property instead */ - slots = get_property(np, "slot-names", &len); + slots = of_get_property(np, "slot-names", &len); if (slots && slots->count > 0) { if (strcmp(slots->name, "IrDA") == 0) uap->flags |= PMACZILOG_FLAG_IS_IRDA; @@ -1471,7 +1471,7 @@ no_dma: of_find_node_by_name(NULL, "i2c-modem"); if (i2c_modem) { const char* mid = - get_property(i2c_modem, "modem-id", NULL); + of_get_property(i2c_modem, "modem-id", NULL); if (mid) switch(*mid) { case 0x04 : case 0x05 : diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 3ba9208ebd0c..10bc0209cd66 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -957,7 +957,7 @@ static struct uart_driver s3c24xx_uart_drv = { static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { [0] = { .port = { - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), .iotype = UPIO_MEM, .irq = IRQ_S3CUART_RX0, .uartclk = 0, @@ -969,7 +969,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { }, [1] = { .port = { - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[1].port.lock), .iotype = UPIO_MEM, .irq = IRQ_S3CUART_RX1, .uartclk = 0, @@ -983,7 +983,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { [2] = { .port = { - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[2].port.lock), .iotype = UPIO_MEM, .irq = IRQ_S3CUART_RX2, .uartclk = 0, diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index 509ace7e6881..1deb5764326d 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -15,31 +15,6 @@ * published by the Free Software Foundation. * * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller - * - * Revision History: - * 0.30 Initial revision. (Renamed from serial_txx927.c) - * 0.31 Use save_flags instead of local_irq_save. - * 0.32 Support SCLK. - * 0.33 Switch TXX9_TTY_NAME by CONFIG_SERIAL_TXX9_STDSERIAL. - * Support TIOCSERGETLSR. - * 0.34 Support slow baudrate. - * 0.40 Merge codes from mainstream kernel (2.4.22). - * 0.41 Fix console checking in rs_shutdown_port(). - * Disable flow-control in serial_console_write(). - * 0.42 Fix minor compiler warning. - * 1.00 Kernel 2.6. Converted to new serial core (based on 8250.c). - * 1.01 Set fifosize to make tx_empry called properly. - * Use standard uart_get_divisor. - * 1.02 Cleanup. (import 8250.c changes) - * 1.03 Fix low-latency mode. (import 8250.c changes) - * 1.04 Remove usage of deprecated functions, cleanup. - * 1.05 More strict check in verify_port. Cleanup. - * 1.06 Do not insert a char caused previous overrun. - * Fix some spin_locks. - * Do not call uart_add_one_port for absent ports. - * 1.07 Use CONFIG_SERIAL_TXX9_NR_UARTS. Cleanup. - * 1.08 Use platform_device. - * Fix and cleanup suspend/resume/initialization codes. */ #if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) @@ -62,7 +37,7 @@ #include <asm/io.h> -static char *serial_version = "1.08"; +static char *serial_version = "1.09"; static char *serial_name = "TX39/49 Serial driver"; #define PASS_LIMIT 256 @@ -70,13 +45,14 @@ static char *serial_name = "TX39/49 Serial driver"; #if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) /* "ttyS" is used for standard serial driver */ #define TXX9_TTY_NAME "ttyTX" -#define TXX9_TTY_MINOR_START (64 + 64) /* ttyTX0(128), ttyTX1(129) */ +#define TXX9_TTY_MINOR_START 196 +#define TXX9_TTY_MAJOR 204 #else /* acts like standard serial driver */ #define TXX9_TTY_NAME "ttyS" #define TXX9_TTY_MINOR_START 64 -#endif #define TXX9_TTY_MAJOR TTY_MAJOR +#endif /* flag aliases */ #define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 4a012d9acbff..07c587ec71be 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -64,6 +64,17 @@ config SPI_BFIN help This is the SPI controller master driver for Blackfin 5xx processor. +config SPI_AU1550 + tristate "Au1550/Au12x0 SPI Controller" + depends on SPI_MASTER && (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL + select SPI_BITBANG + help + If you say yes to this option, support will be included for the + Au1550 SPI controller (may also work with Au1200,Au1210,Au1250). + + This driver can also be built as a module. If so, the module + will be called au1550_spi. + config SPI_BITBANG tristate "Bitbanging SPI master" depends on SPI_MASTER && EXPERIMENTAL @@ -159,6 +170,15 @@ config SPI_AT25 This driver can also be built as a module. If so, the module will be called at25. +config SPI_SPIDEV + tristate "User mode SPI device driver support" + depends on SPI_MASTER && EXPERIMENTAL + help + This supports user mode SPI protocol drivers. + + Note that this application programming interface is EXPERIMENTAL + and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes. + # # Add new SPI protocol masters in alphabetical order above this line # diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index a95ade857a2f..624b6363f490 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_SPI_MASTER) += spi.o obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o +obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o @@ -25,6 +26,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o # SPI protocol drivers (device/link on bus) obj-$(CONFIG_SPI_AT25) += at25.o +obj-$(CONFIG_SPI_SPIDEV) += spidev.o # ... add above this line ... # SPI slave controller drivers (upstream link) diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c new file mode 100644 index 000000000000..ae2b1af0dba4 --- /dev/null +++ b/drivers/spi/au1550_spi.c @@ -0,0 +1,974 @@ +/* + * au1550_spi.c - au1550 psc spi controller driver + * may work also with au1200, au1210, au1250 + * will not work on au1000, au1100 and au1500 (no full spi controller there) + * + * Copyright (c) 2006 ATRON electronic GmbH + * Author: Jan Nikitenko <jan.nikitenko@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> +#include <linux/dma-mapping.h> +#include <linux/completion.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1xxx_psc.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> + +#include <asm/mach-au1x00/au1550_spi.h> + +static unsigned usedma = 1; +module_param(usedma, uint, 0644); + +/* +#define AU1550_SPI_DEBUG_LOOPBACK +*/ + + +#define AU1550_SPI_DBDMA_DESCRIPTORS 1 +#define AU1550_SPI_DMA_RXTMP_MINSIZE 2048U + +struct au1550_spi { + struct spi_bitbang bitbang; + + volatile psc_spi_t __iomem *regs; + int irq; + unsigned freq_max; + unsigned freq_min; + + unsigned len; + unsigned tx_count; + unsigned rx_count; + const u8 *tx; + u8 *rx; + + void (*rx_word)(struct au1550_spi *hw); + void (*tx_word)(struct au1550_spi *hw); + int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t); + irqreturn_t (*irq_callback)(struct au1550_spi *hw); + + struct completion master_done; + + unsigned usedma; + u32 dma_tx_id; + u32 dma_rx_id; + u32 dma_tx_ch; + u32 dma_rx_ch; + + u8 *dma_rx_tmpbuf; + unsigned dma_rx_tmpbuf_size; + u32 dma_rx_tmpbuf_addr; + + struct spi_master *master; + struct device *dev; + struct au1550_spi_info *pdata; +}; + + +/* we use an 8-bit memory device for dma transfers to/from spi fifo */ +static dbdev_tab_t au1550_spi_mem_dbdev = +{ + .dev_id = DBDMA_MEM_CHAN, + .dev_flags = DEV_FLAGS_ANYUSE|DEV_FLAGS_SYNC, + .dev_tsize = 0, + .dev_devwidth = 8, + .dev_physaddr = 0x00000000, + .dev_intlevel = 0, + .dev_intpolarity = 0 +}; + +static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw); + + +/** + * compute BRG and DIV bits to setup spi clock based on main input clock rate + * that was specified in platform data structure + * according to au1550 datasheet: + * psc_tempclk = psc_mainclk / (2 << DIV) + * spiclk = psc_tempclk / (2 * (BRG + 1)) + * BRG valid range is 4..63 + * DIV valid range is 0..3 + */ +static u32 au1550_spi_baudcfg(struct au1550_spi *hw, unsigned speed_hz) +{ + u32 mainclk_hz = hw->pdata->mainclk_hz; + u32 div, brg; + + for (div = 0; div < 4; div++) { + brg = mainclk_hz / speed_hz / (4 << div); + /* now we have BRG+1 in brg, so count with that */ + if (brg < (4 + 1)) { + brg = (4 + 1); /* speed_hz too big */ + break; /* set lowest brg (div is == 0) */ + } + if (brg <= (63 + 1)) + break; /* we have valid brg and div */ + } + if (div == 4) { + div = 3; /* speed_hz too small */ + brg = (63 + 1); /* set highest brg and div */ + } + brg--; + return PSC_SPICFG_SET_BAUD(brg) | PSC_SPICFG_SET_DIV(div); +} + +static inline void au1550_spi_mask_ack_all(struct au1550_spi *hw) +{ + hw->regs->psc_spimsk = + PSC_SPIMSK_MM | PSC_SPIMSK_RR | PSC_SPIMSK_RO + | PSC_SPIMSK_RU | PSC_SPIMSK_TR | PSC_SPIMSK_TO + | PSC_SPIMSK_TU | PSC_SPIMSK_SD | PSC_SPIMSK_MD; + au_sync(); + + hw->regs->psc_spievent = + PSC_SPIEVNT_MM | PSC_SPIEVNT_RR | PSC_SPIEVNT_RO + | PSC_SPIEVNT_RU | PSC_SPIEVNT_TR | PSC_SPIEVNT_TO + | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD | PSC_SPIEVNT_MD; + au_sync(); +} + +static void au1550_spi_reset_fifos(struct au1550_spi *hw) +{ + u32 pcr; + + hw->regs->psc_spipcr = PSC_SPIPCR_RC | PSC_SPIPCR_TC; + au_sync(); + do { + pcr = hw->regs->psc_spipcr; + au_sync(); + } while (pcr != 0); +} + +/* + * dma transfers are used for the most common spi word size of 8-bits + * we cannot easily change already set up dma channels' width, so if we wanted + * dma support for more than 8-bit words (up to 24 bits), we would need to + * setup dma channels from scratch on each spi transfer, based on bits_per_word + * instead we have pre set up 8 bit dma channels supporting spi 4 to 8 bits + * transfers, and 9 to 24 bits spi transfers will be done in pio irq based mode + * callbacks to handle dma or pio are set up in au1550_spi_bits_handlers_set() + */ +static void au1550_spi_chipsel(struct spi_device *spi, int value) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + unsigned cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; + u32 cfg, stat; + + switch (value) { + case BITBANG_CS_INACTIVE: + if (hw->pdata->deactivate_cs) + hw->pdata->deactivate_cs(hw->pdata, spi->chip_select, + cspol); + break; + + case BITBANG_CS_ACTIVE: + au1550_spi_bits_handlers_set(hw, spi->bits_per_word); + + cfg = hw->regs->psc_spicfg; + au_sync(); + hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; + au_sync(); + + if (spi->mode & SPI_CPOL) + cfg |= PSC_SPICFG_BI; + else + cfg &= ~PSC_SPICFG_BI; + if (spi->mode & SPI_CPHA) + cfg &= ~PSC_SPICFG_CDE; + else + cfg |= PSC_SPICFG_CDE; + + if (spi->mode & SPI_LSB_FIRST) + cfg |= PSC_SPICFG_MLF; + else + cfg &= ~PSC_SPICFG_MLF; + + if (hw->usedma && spi->bits_per_word <= 8) + cfg &= ~PSC_SPICFG_DD_DISABLE; + else + cfg |= PSC_SPICFG_DD_DISABLE; + cfg = PSC_SPICFG_CLR_LEN(cfg); + cfg |= PSC_SPICFG_SET_LEN(spi->bits_per_word); + + cfg = PSC_SPICFG_CLR_BAUD(cfg); + cfg &= ~PSC_SPICFG_SET_DIV(3); + cfg |= au1550_spi_baudcfg(hw, spi->max_speed_hz); + + hw->regs->psc_spicfg = cfg | PSC_SPICFG_DE_ENABLE; + au_sync(); + do { + stat = hw->regs->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_DR) == 0); + + if (hw->pdata->activate_cs) + hw->pdata->activate_cs(hw->pdata, spi->chip_select, + cspol); + break; + } +} + +static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + unsigned bpw, hz; + u32 cfg, stat; + + bpw = t ? t->bits_per_word : spi->bits_per_word; + hz = t ? t->speed_hz : spi->max_speed_hz; + + if (bpw < 4 || bpw > 24) { + dev_err(&spi->dev, "setupxfer: invalid bits_per_word=%d\n", + bpw); + return -EINVAL; + } + if (hz > spi->max_speed_hz || hz > hw->freq_max || hz < hw->freq_min) { + dev_err(&spi->dev, "setupxfer: clock rate=%d out of range\n", + hz); + return -EINVAL; + } + + au1550_spi_bits_handlers_set(hw, spi->bits_per_word); + + cfg = hw->regs->psc_spicfg; + au_sync(); + hw->regs->psc_spicfg = cfg & ~PSC_SPICFG_DE_ENABLE; + au_sync(); + + if (hw->usedma && bpw <= 8) + cfg &= ~PSC_SPICFG_DD_DISABLE; + else + cfg |= PSC_SPICFG_DD_DISABLE; + cfg = PSC_SPICFG_CLR_LEN(cfg); + cfg |= PSC_SPICFG_SET_LEN(bpw); + + cfg = PSC_SPICFG_CLR_BAUD(cfg); + cfg &= ~PSC_SPICFG_SET_DIV(3); + cfg |= au1550_spi_baudcfg(hw, hz); + + hw->regs->psc_spicfg = cfg; + au_sync(); + + if (cfg & PSC_SPICFG_DE_ENABLE) { + do { + stat = hw->regs->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_DR) == 0); + } + + au1550_spi_reset_fifos(hw); + au1550_spi_mask_ack_all(hw); + return 0; +} + +static int au1550_spi_setup(struct spi_device *spi) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + + if (spi->bits_per_word == 0) + spi->bits_per_word = 8; + if (spi->bits_per_word < 4 || spi->bits_per_word > 24) { + dev_err(&spi->dev, "setup: invalid bits_per_word=%d\n", + spi->bits_per_word); + return -EINVAL; + } + + if (spi->max_speed_hz == 0) + spi->max_speed_hz = hw->freq_max; + if (spi->max_speed_hz > hw->freq_max + || spi->max_speed_hz < hw->freq_min) + return -EINVAL; + /* + * NOTE: cannot change speed and other hw settings immediately, + * otherwise sharing of spi bus is not possible, + * so do not call setupxfer(spi, NULL) here + */ + return 0; +} + +/* + * for dma spi transfers, we have to setup rx channel, otherwise there is + * no reliable way how to recognize that spi transfer is done + * dma complete callbacks are called before real spi transfer is finished + * and if only tx dma channel is set up (and rx fifo overflow event masked) + * spi master done event irq is not generated unless rx fifo is empty (emptied) + * so we need rx tmp buffer to use for rx dma if user does not provide one + */ +static int au1550_spi_dma_rxtmp_alloc(struct au1550_spi *hw, unsigned size) +{ + hw->dma_rx_tmpbuf = kmalloc(size, GFP_KERNEL); + if (!hw->dma_rx_tmpbuf) + return -ENOMEM; + hw->dma_rx_tmpbuf_size = size; + hw->dma_rx_tmpbuf_addr = dma_map_single(hw->dev, hw->dma_rx_tmpbuf, + size, DMA_FROM_DEVICE); + if (dma_mapping_error(hw->dma_rx_tmpbuf_addr)) { + kfree(hw->dma_rx_tmpbuf); + hw->dma_rx_tmpbuf = 0; + hw->dma_rx_tmpbuf_size = 0; + return -EFAULT; + } + return 0; +} + +static void au1550_spi_dma_rxtmp_free(struct au1550_spi *hw) +{ + dma_unmap_single(hw->dev, hw->dma_rx_tmpbuf_addr, + hw->dma_rx_tmpbuf_size, DMA_FROM_DEVICE); + kfree(hw->dma_rx_tmpbuf); + hw->dma_rx_tmpbuf = 0; + hw->dma_rx_tmpbuf_size = 0; +} + +static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + dma_addr_t dma_tx_addr; + dma_addr_t dma_rx_addr; + u32 res; + + hw->len = t->len; + hw->tx_count = 0; + hw->rx_count = 0; + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + dma_tx_addr = t->tx_dma; + dma_rx_addr = t->rx_dma; + + /* + * check if buffers are already dma mapped, map them otherwise + * use rx buffer in place of tx if tx buffer was not provided + * use temp rx buffer (preallocated or realloc to fit) for rx dma + */ + if (t->rx_buf) { + if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ + dma_rx_addr = dma_map_single(hw->dev, + (void *)t->rx_buf, + t->len, DMA_FROM_DEVICE); + if (dma_mapping_error(dma_rx_addr)) + dev_err(hw->dev, "rx dma map error\n"); + } + } else { + if (t->len > hw->dma_rx_tmpbuf_size) { + int ret; + + au1550_spi_dma_rxtmp_free(hw); + ret = au1550_spi_dma_rxtmp_alloc(hw, max(t->len, + AU1550_SPI_DMA_RXTMP_MINSIZE)); + if (ret < 0) + return ret; + } + hw->rx = hw->dma_rx_tmpbuf; + dma_rx_addr = hw->dma_rx_tmpbuf_addr; + dma_sync_single_for_device(hw->dev, dma_rx_addr, + t->len, DMA_FROM_DEVICE); + } + if (t->tx_buf) { + if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ + dma_tx_addr = dma_map_single(hw->dev, + (void *)t->tx_buf, + t->len, DMA_TO_DEVICE); + if (dma_mapping_error(dma_tx_addr)) + dev_err(hw->dev, "tx dma map error\n"); + } + } else { + dma_sync_single_for_device(hw->dev, dma_rx_addr, + t->len, DMA_BIDIRECTIONAL); + hw->tx = hw->rx; + } + + /* put buffers on the ring */ + res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, hw->rx, t->len); + if (!res) + dev_err(hw->dev, "rx dma put dest error\n"); + + res = au1xxx_dbdma_put_source(hw->dma_tx_ch, (void *)hw->tx, t->len); + if (!res) + dev_err(hw->dev, "tx dma put source error\n"); + + au1xxx_dbdma_start(hw->dma_rx_ch); + au1xxx_dbdma_start(hw->dma_tx_ch); + + /* by default enable nearly all events interrupt */ + hw->regs->psc_spimsk = PSC_SPIMSK_SD; + au_sync(); + + /* start the transfer */ + hw->regs->psc_spipcr = PSC_SPIPCR_MS; + au_sync(); + + wait_for_completion(&hw->master_done); + + au1xxx_dbdma_stop(hw->dma_tx_ch); + au1xxx_dbdma_stop(hw->dma_rx_ch); + + if (!t->rx_buf) { + /* using the temporal preallocated and premapped buffer */ + dma_sync_single_for_cpu(hw->dev, dma_rx_addr, t->len, + DMA_FROM_DEVICE); + } + /* unmap buffers if mapped above */ + if (t->rx_buf && t->rx_dma == 0 ) + dma_unmap_single(hw->dev, dma_rx_addr, t->len, + DMA_FROM_DEVICE); + if (t->tx_buf && t->tx_dma == 0 ) + dma_unmap_single(hw->dev, dma_tx_addr, t->len, + DMA_TO_DEVICE); + + return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; +} + +static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw) +{ + u32 stat, evnt; + + stat = hw->regs->psc_spistat; + evnt = hw->regs->psc_spievent; + au_sync(); + if ((stat & PSC_SPISTAT_DI) == 0) { + dev_err(hw->dev, "Unexpected IRQ!\n"); + return IRQ_NONE; + } + + if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO + | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO + | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD)) + != 0) { + /* + * due to an spi error we consider transfer as done, + * so mask all events until before next transfer start + * and stop the possibly running dma immediatelly + */ + au1550_spi_mask_ack_all(hw); + au1xxx_dbdma_stop(hw->dma_rx_ch); + au1xxx_dbdma_stop(hw->dma_tx_ch); + + /* get number of transfered bytes */ + hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch); + hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch); + + au1xxx_dbdma_reset(hw->dma_rx_ch); + au1xxx_dbdma_reset(hw->dma_tx_ch); + au1550_spi_reset_fifos(hw); + + dev_err(hw->dev, + "Unexpected SPI error: event=0x%x stat=0x%x!\n", + evnt, stat); + + complete(&hw->master_done); + return IRQ_HANDLED; + } + + if ((evnt & PSC_SPIEVNT_MD) != 0) { + /* transfer completed successfully */ + au1550_spi_mask_ack_all(hw); + hw->rx_count = hw->len; + hw->tx_count = hw->len; + complete(&hw->master_done); + } + return IRQ_HANDLED; +} + + +/* routines to handle different word sizes in pio mode */ +#define AU1550_SPI_RX_WORD(size, mask) \ +static void au1550_spi_rx_word_##size(struct au1550_spi *hw) \ +{ \ + u32 fifoword = hw->regs->psc_spitxrx & (u32)(mask); \ + au_sync(); \ + if (hw->rx) { \ + *(u##size *)hw->rx = (u##size)fifoword; \ + hw->rx += (size) / 8; \ + } \ + hw->rx_count += (size) / 8; \ +} + +#define AU1550_SPI_TX_WORD(size, mask) \ +static void au1550_spi_tx_word_##size(struct au1550_spi *hw) \ +{ \ + u32 fifoword = 0; \ + if (hw->tx) { \ + fifoword = *(u##size *)hw->tx & (u32)(mask); \ + hw->tx += (size) / 8; \ + } \ + hw->tx_count += (size) / 8; \ + if (hw->tx_count >= hw->len) \ + fifoword |= PSC_SPITXRX_LC; \ + hw->regs->psc_spitxrx = fifoword; \ + au_sync(); \ +} + +AU1550_SPI_RX_WORD(8,0xff) +AU1550_SPI_RX_WORD(16,0xffff) +AU1550_SPI_RX_WORD(32,0xffffff) +AU1550_SPI_TX_WORD(8,0xff) +AU1550_SPI_TX_WORD(16,0xffff) +AU1550_SPI_TX_WORD(32,0xffffff) + +static int au1550_spi_pio_txrxb(struct spi_device *spi, struct spi_transfer *t) +{ + u32 stat, mask; + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->len = t->len; + hw->tx_count = 0; + hw->rx_count = 0; + + /* by default enable nearly all events after filling tx fifo */ + mask = PSC_SPIMSK_SD; + + /* fill the transmit FIFO */ + while (hw->tx_count < hw->len) { + + hw->tx_word(hw); + + if (hw->tx_count >= hw->len) { + /* mask tx fifo request interrupt as we are done */ + mask |= PSC_SPIMSK_TR; + } + + stat = hw->regs->psc_spistat; + au_sync(); + if (stat & PSC_SPISTAT_TF) + break; + } + + /* enable event interrupts */ + hw->regs->psc_spimsk = mask; + au_sync(); + + /* start the transfer */ + hw->regs->psc_spipcr = PSC_SPIPCR_MS; + au_sync(); + + wait_for_completion(&hw->master_done); + + return hw->rx_count < hw->tx_count ? hw->rx_count : hw->tx_count; +} + +static irqreturn_t au1550_spi_pio_irq_callback(struct au1550_spi *hw) +{ + int busy; + u32 stat, evnt; + + stat = hw->regs->psc_spistat; + evnt = hw->regs->psc_spievent; + au_sync(); + if ((stat & PSC_SPISTAT_DI) == 0) { + dev_err(hw->dev, "Unexpected IRQ!\n"); + return IRQ_NONE; + } + + if ((evnt & (PSC_SPIEVNT_MM | PSC_SPIEVNT_RO + | PSC_SPIEVNT_RU | PSC_SPIEVNT_TO + | PSC_SPIEVNT_TU | PSC_SPIEVNT_SD)) + != 0) { + dev_err(hw->dev, + "Unexpected SPI error: event=0x%x stat=0x%x!\n", + evnt, stat); + /* + * due to an error we consider transfer as done, + * so mask all events until before next transfer start + */ + au1550_spi_mask_ack_all(hw); + au1550_spi_reset_fifos(hw); + complete(&hw->master_done); + return IRQ_HANDLED; + } + + /* + * while there is something to read from rx fifo + * or there is a space to write to tx fifo: + */ + do { + busy = 0; + stat = hw->regs->psc_spistat; + au_sync(); + + if ((stat & PSC_SPISTAT_RE) == 0 && hw->rx_count < hw->len) { + hw->rx_word(hw); + /* ack the receive request event */ + hw->regs->psc_spievent = PSC_SPIEVNT_RR; + au_sync(); + busy = 1; + } + + if ((stat & PSC_SPISTAT_TF) == 0 && hw->tx_count < hw->len) { + hw->tx_word(hw); + /* ack the transmit request event */ + hw->regs->psc_spievent = PSC_SPIEVNT_TR; + au_sync(); + busy = 1; + } + } while (busy); + + evnt = hw->regs->psc_spievent; + au_sync(); + + if (hw->rx_count >= hw->len || (evnt & PSC_SPIEVNT_MD) != 0) { + /* transfer completed successfully */ + au1550_spi_mask_ack_all(hw); + complete(&hw->master_done); + } + return IRQ_HANDLED; +} + +static int au1550_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct au1550_spi *hw = spi_master_get_devdata(spi->master); + return hw->txrx_bufs(spi, t); +} + +static irqreturn_t au1550_spi_irq(int irq, void *dev, struct pt_regs *regs) +{ + struct au1550_spi *hw = dev; + return hw->irq_callback(hw); +} + +static void au1550_spi_bits_handlers_set(struct au1550_spi *hw, int bpw) +{ + if (bpw <= 8) { + if (hw->usedma) { + hw->txrx_bufs = &au1550_spi_dma_txrxb; + hw->irq_callback = &au1550_spi_dma_irq_callback; + } else { + hw->rx_word = &au1550_spi_rx_word_8; + hw->tx_word = &au1550_spi_tx_word_8; + hw->txrx_bufs = &au1550_spi_pio_txrxb; + hw->irq_callback = &au1550_spi_pio_irq_callback; + } + } else if (bpw <= 16) { + hw->rx_word = &au1550_spi_rx_word_16; + hw->tx_word = &au1550_spi_tx_word_16; + hw->txrx_bufs = &au1550_spi_pio_txrxb; + hw->irq_callback = &au1550_spi_pio_irq_callback; + } else { + hw->rx_word = &au1550_spi_rx_word_32; + hw->tx_word = &au1550_spi_tx_word_32; + hw->txrx_bufs = &au1550_spi_pio_txrxb; + hw->irq_callback = &au1550_spi_pio_irq_callback; + } +} + +static void __init au1550_spi_setup_psc_as_spi(struct au1550_spi *hw) +{ + u32 stat, cfg; + + /* set up the PSC for SPI mode */ + hw->regs->psc_ctrl = PSC_CTRL_DISABLE; + au_sync(); + hw->regs->psc_sel = PSC_SEL_PS_SPIMODE; + au_sync(); + + hw->regs->psc_spicfg = 0; + au_sync(); + + hw->regs->psc_ctrl = PSC_CTRL_ENABLE; + au_sync(); + + do { + stat = hw->regs->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_SR) == 0); + + + cfg = hw->usedma ? 0 : PSC_SPICFG_DD_DISABLE; + cfg |= PSC_SPICFG_SET_LEN(8); + cfg |= PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8; + /* use minimal allowed brg and div values as initial setting: */ + cfg |= PSC_SPICFG_SET_BAUD(4) | PSC_SPICFG_SET_DIV(0); + +#ifdef AU1550_SPI_DEBUG_LOOPBACK + cfg |= PSC_SPICFG_LB; +#endif + + hw->regs->psc_spicfg = cfg; + au_sync(); + + au1550_spi_mask_ack_all(hw); + + hw->regs->psc_spicfg |= PSC_SPICFG_DE_ENABLE; + au_sync(); + + do { + stat = hw->regs->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_DR) == 0); +} + + +static int __init au1550_spi_probe(struct platform_device *pdev) +{ + struct au1550_spi *hw; + struct spi_master *master; + int err = 0; + + master = spi_alloc_master(&pdev->dev, sizeof(struct au1550_spi)); + if (master == NULL) { + dev_err(&pdev->dev, "No memory for spi_master\n"); + err = -ENOMEM; + goto err_nomem; + } + + hw = spi_master_get_devdata(master); + + hw->master = spi_master_get(master); + hw->pdata = pdev->dev.platform_data; + hw->dev = &pdev->dev; + + if (hw->pdata == NULL) { + dev_err(&pdev->dev, "No platform data supplied\n"); + err = -ENOENT; + goto err_no_pdata; + } + + platform_set_drvdata(pdev, hw); + + init_completion(&hw->master_done); + + hw->bitbang.master = hw->master; + hw->bitbang.setup_transfer = au1550_spi_setupxfer; + hw->bitbang.chipselect = au1550_spi_chipsel; + hw->bitbang.master->setup = au1550_spi_setup; + hw->bitbang.txrx_bufs = au1550_spi_txrx_bufs; + + switch (hw->pdata->bus_num) { + case 0: + hw->irq = AU1550_PSC0_INT; + hw->regs = (volatile psc_spi_t *)PSC0_BASE_ADDR; + hw->dma_rx_id = DSCR_CMD0_PSC0_RX; + hw->dma_tx_id = DSCR_CMD0_PSC0_TX; + break; + case 1: + hw->irq = AU1550_PSC1_INT; + hw->regs = (volatile psc_spi_t *)PSC1_BASE_ADDR; + hw->dma_rx_id = DSCR_CMD0_PSC1_RX; + hw->dma_tx_id = DSCR_CMD0_PSC1_TX; + break; + case 2: + hw->irq = AU1550_PSC2_INT; + hw->regs = (volatile psc_spi_t *)PSC2_BASE_ADDR; + hw->dma_rx_id = DSCR_CMD0_PSC2_RX; + hw->dma_tx_id = DSCR_CMD0_PSC2_TX; + break; + case 3: + hw->irq = AU1550_PSC3_INT; + hw->regs = (volatile psc_spi_t *)PSC3_BASE_ADDR; + hw->dma_rx_id = DSCR_CMD0_PSC3_RX; + hw->dma_tx_id = DSCR_CMD0_PSC3_TX; + break; + default: + dev_err(&pdev->dev, "Wrong bus_num of SPI\n"); + err = -ENOENT; + goto err_no_pdata; + } + + if (request_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t), + pdev->name) == NULL) { + dev_err(&pdev->dev, "Cannot reserve iomem region\n"); + err = -ENXIO; + goto err_no_iores; + } + + + if (usedma) { + if (pdev->dev.dma_mask == NULL) + dev_warn(&pdev->dev, "no dma mask\n"); + else + hw->usedma = 1; + } + + if (hw->usedma) { + /* + * create memory device with 8 bits dev_devwidth + * needed for proper byte ordering to spi fifo + */ + int memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev); + if (!memid) { + dev_err(&pdev->dev, + "Cannot create dma 8 bit mem device\n"); + err = -ENXIO; + goto err_dma_add_dev; + } + + hw->dma_tx_ch = au1xxx_dbdma_chan_alloc(memid, + hw->dma_tx_id, NULL, (void *)hw); + if (hw->dma_tx_ch == 0) { + dev_err(&pdev->dev, + "Cannot allocate tx dma channel\n"); + err = -ENXIO; + goto err_no_txdma; + } + au1xxx_dbdma_set_devwidth(hw->dma_tx_ch, 8); + if (au1xxx_dbdma_ring_alloc(hw->dma_tx_ch, + AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { + dev_err(&pdev->dev, + "Cannot allocate tx dma descriptors\n"); + err = -ENXIO; + goto err_no_txdma_descr; + } + + + hw->dma_rx_ch = au1xxx_dbdma_chan_alloc(hw->dma_rx_id, + memid, NULL, (void *)hw); + if (hw->dma_rx_ch == 0) { + dev_err(&pdev->dev, + "Cannot allocate rx dma channel\n"); + err = -ENXIO; + goto err_no_rxdma; + } + au1xxx_dbdma_set_devwidth(hw->dma_rx_ch, 8); + if (au1xxx_dbdma_ring_alloc(hw->dma_rx_ch, + AU1550_SPI_DBDMA_DESCRIPTORS) == 0) { + dev_err(&pdev->dev, + "Cannot allocate rx dma descriptors\n"); + err = -ENXIO; + goto err_no_rxdma_descr; + } + + err = au1550_spi_dma_rxtmp_alloc(hw, + AU1550_SPI_DMA_RXTMP_MINSIZE); + if (err < 0) { + dev_err(&pdev->dev, + "Cannot allocate initial rx dma tmp buffer\n"); + goto err_dma_rxtmp_alloc; + } + } + + au1550_spi_bits_handlers_set(hw, 8); + + err = request_irq(hw->irq, au1550_spi_irq, 0, pdev->name, hw); + if (err) { + dev_err(&pdev->dev, "Cannot claim IRQ\n"); + goto err_no_irq; + } + + master->bus_num = hw->pdata->bus_num; + master->num_chipselect = hw->pdata->num_chipselect; + + /* + * precompute valid range for spi freq - from au1550 datasheet: + * psc_tempclk = psc_mainclk / (2 << DIV) + * spiclk = psc_tempclk / (2 * (BRG + 1)) + * BRG valid range is 4..63 + * DIV valid range is 0..3 + * round the min and max frequencies to values that would still + * produce valid brg and div + */ + { + int min_div = (2 << 0) * (2 * (4 + 1)); + int max_div = (2 << 3) * (2 * (63 + 1)); + hw->freq_max = hw->pdata->mainclk_hz / min_div; + hw->freq_min = hw->pdata->mainclk_hz / (max_div + 1) + 1; + } + + au1550_spi_setup_psc_as_spi(hw); + + err = spi_bitbang_start(&hw->bitbang); + if (err) { + dev_err(&pdev->dev, "Failed to register SPI master\n"); + goto err_register; + } + + dev_info(&pdev->dev, + "spi master registered: bus_num=%d num_chipselect=%d\n", + master->bus_num, master->num_chipselect); + + return 0; + +err_register: + free_irq(hw->irq, hw); + +err_no_irq: + au1550_spi_dma_rxtmp_free(hw); + +err_dma_rxtmp_alloc: +err_no_rxdma_descr: + if (hw->usedma) + au1xxx_dbdma_chan_free(hw->dma_rx_ch); + +err_no_rxdma: +err_no_txdma_descr: + if (hw->usedma) + au1xxx_dbdma_chan_free(hw->dma_tx_ch); + +err_no_txdma: +err_dma_add_dev: + release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t)); + +err_no_iores: +err_no_pdata: + spi_master_put(hw->master); + +err_nomem: + return err; +} + +static int __exit au1550_spi_remove(struct platform_device *pdev) +{ + struct au1550_spi *hw = platform_get_drvdata(pdev); + + dev_info(&pdev->dev, "spi master remove: bus_num=%d\n", + hw->master->bus_num); + + spi_bitbang_stop(&hw->bitbang); + free_irq(hw->irq, hw); + release_mem_region((unsigned long)hw->regs, sizeof(psc_spi_t)); + + if (hw->usedma) { + au1550_spi_dma_rxtmp_free(hw); + au1xxx_dbdma_chan_free(hw->dma_rx_ch); + au1xxx_dbdma_chan_free(hw->dma_tx_ch); + } + + platform_set_drvdata(pdev, NULL); + + spi_master_put(hw->master); + return 0; +} + +static struct platform_driver au1550_spi_drv = { + .remove = __exit_p(au1550_spi_remove), + .driver = { + .name = "au1550-spi", + .owner = THIS_MODULE, + }, +}; + +static int __init au1550_spi_init(void) +{ + return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe); +} +module_init(au1550_spi_init); + +static void __exit au1550_spi_exit(void) +{ + platform_driver_unregister(&au1550_spi_drv); +} +module_exit(au1550_spi_exit); + +MODULE_DESCRIPTION("Au1550 PSC SPI Driver"); +MODULE_AUTHOR("Jan Nikitenko <jan.nikitenko@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 6657331eed93..c3219b29b5ac 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -152,6 +152,11 @@ static void spi_drv_shutdown(struct device *dev) sdrv->shutdown(to_spi_device(dev)); } +/** + * spi_register_driver - register a SPI driver + * @sdrv: the driver to register + * Context: can sleep + */ int spi_register_driver(struct spi_driver *sdrv) { sdrv->driver.bus = &spi_bus_type; @@ -183,7 +188,13 @@ static LIST_HEAD(board_list); static DECLARE_MUTEX(board_lock); -/* On typical mainboards, this is purely internal; and it's not needed +/** + * spi_new_device - instantiate one new SPI device + * @master: Controller to which device is connected + * @chip: Describes the SPI device + * Context: can sleep + * + * On typical mainboards, this is purely internal; and it's not needed * after board init creates the hard-wired devices. Some development * platforms may not be able to use spi_register_board_info though, and * this is exported so that for example a USB or parport based adapter @@ -251,7 +262,12 @@ fail: } EXPORT_SYMBOL_GPL(spi_new_device); -/* +/** + * spi_register_board_info - register SPI devices for a given board + * @info: array of chip descriptors + * @n: how many descriptors are provided + * Context: can sleep + * * Board-specific early init code calls this (probably during arch_initcall) * with segments of the SPI device table. Any device nodes are created later, * after the relevant parent SPI controller (bus_num) is defined. We keep @@ -337,9 +353,10 @@ static struct class spi_master_class = { /** * spi_alloc_master - allocate SPI master controller * @dev: the controller, possibly using the platform_bus - * @size: how much driver-private data to preallocate; the pointer to this + * @size: how much zeroed driver-private data to allocate; the pointer to this * memory is in the class_data field of the returned class_device, * accessible with spi_master_get_devdata(). + * Context: can sleep * * This call is used only by SPI master controller drivers, which are the * only ones directly touching chip registers. It's how they allocate @@ -375,6 +392,7 @@ EXPORT_SYMBOL_GPL(spi_alloc_master); /** * spi_register_master - register SPI master controller * @master: initialized master, originally from spi_alloc_master() + * Context: can sleep * * SPI master controllers connect to their drivers using some non-SPI bus, * such as the platform bus. The final stage of probe() in that code @@ -437,6 +455,7 @@ static int __unregister(struct device *dev, void *unused) /** * spi_unregister_master - unregister SPI master controller * @master: the master being unregistered + * Context: can sleep * * This call is used only by SPI master controller drivers, which are the * only ones directly touching chip registers. @@ -455,6 +474,7 @@ EXPORT_SYMBOL_GPL(spi_unregister_master); /** * spi_busnum_to_master - look up master associated with bus_num * @bus_num: the master's bus number + * Context: can sleep * * This call may be used with devices that are registered after * arch init time. It returns a refcounted pointer to the relevant @@ -492,6 +512,7 @@ static void spi_complete(void *arg) * spi_sync - blocking/synchronous SPI data transfers * @spi: device with which data will be exchanged * @message: describes the data transfers + * Context: can sleep * * This call may only be used from a context that may sleep. The sleep * is non-interruptible, and has no timeout. Low-overhead controller @@ -508,7 +529,7 @@ static void spi_complete(void *arg) * * The return value is a negative error code if the message could not be * submitted, else zero. When the value is zero, then message->status is - * also defined: it's the completion code for the transfer, either zero + * also defined; it's the completion code for the transfer, either zero * or a negative error code from the controller driver. */ int spi_sync(struct spi_device *spi, struct spi_message *message) @@ -538,6 +559,7 @@ static u8 *buf; * @n_tx: size of txbuf, in bytes * @rxbuf: buffer into which data will be read * @n_rx: size of rxbuf, in bytes (need not be dma-safe) + * Context: can sleep * * This performs a half duplex MicroWire style transaction with the * device, sending txbuf and then reading rxbuf. The return value @@ -545,7 +567,8 @@ static u8 *buf; * This call may only be used from a context that may sleep. * * Parameters to this routine are always copied using a small buffer; - * performance-sensitive or bulk transfer code should instead use + * portable code should never use this for more than 32 bytes. + * Performance-sensitive or bulk transfer code should instead use * spi_{async,sync}() calls with dma-safe buffers. */ int spi_write_then_read(struct spi_device *spi, diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c index 312987a03210..0ee2b2090252 100644 --- a/drivers/spi/spi_butterfly.c +++ b/drivers/spi/spi_butterfly.c @@ -20,7 +20,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/platform_device.h> +#include <linux/device.h> #include <linux/parport.h> #include <linux/sched.h> @@ -40,8 +40,6 @@ * and use this custom parallel port cable. */ -#undef HAVE_USI /* nyet */ - /* DATA output bits (pins 2..9 == D0..D7) */ #define butterfly_nreset (1 << 1) /* pin 3 */ @@ -49,19 +47,13 @@ #define spi_sck_bit (1 << 0) /* pin 2 */ #define spi_mosi_bit (1 << 7) /* pin 9 */ -#define usi_sck_bit (1 << 3) /* pin 5 */ -#define usi_mosi_bit (1 << 4) /* pin 6 */ - #define vcc_bits ((1 << 6) | (1 << 5)) /* pins 7, 8 */ /* STATUS input bits */ #define spi_miso_bit PARPORT_STATUS_BUSY /* pin 11 */ -#define usi_miso_bit PARPORT_STATUS_PAPEROUT /* pin 12 */ - /* CONTROL output bits */ #define spi_cs_bit PARPORT_CONTROL_SELECT /* pin 17 */ -/* USI uses no chipselect */ @@ -70,15 +62,6 @@ static inline struct butterfly *spidev_to_pp(struct spi_device *spi) return spi->controller_data; } -static inline int is_usidev(struct spi_device *spi) -{ -#ifdef HAVE_USI - return spi->chip_select != 1; -#else - return 0; -#endif -} - struct butterfly { /* REVISIT ... for now, this must be first */ @@ -97,23 +80,13 @@ struct butterfly { /*----------------------------------------------------------------------*/ -/* - * these routines may be slower than necessary because they're hiding - * the fact that there are two different SPI busses on this cable: one - * to the DataFlash chip (or AVR SPI controller), the other to the - * AVR USI controller. - */ - static inline void setsck(struct spi_device *spi, int is_on) { struct butterfly *pp = spidev_to_pp(spi); u8 bit, byte = pp->lastbyte; - if (is_usidev(spi)) - bit = usi_sck_bit; - else - bit = spi_sck_bit; + bit = spi_sck_bit; if (is_on) byte |= bit; @@ -129,10 +102,7 @@ setmosi(struct spi_device *spi, int is_on) struct butterfly *pp = spidev_to_pp(spi); u8 bit, byte = pp->lastbyte; - if (is_usidev(spi)) - bit = usi_mosi_bit; - else - bit = spi_mosi_bit; + bit = spi_mosi_bit; if (is_on) byte |= bit; @@ -148,10 +118,7 @@ static inline int getmiso(struct spi_device *spi) int value; u8 bit; - if (is_usidev(spi)) - bit = usi_miso_bit; - else - bit = spi_miso_bit; + bit = spi_miso_bit; /* only STATUS_BUSY is NOT negated */ value = !(parport_read_status(pp->port) & bit); @@ -166,10 +133,6 @@ static void butterfly_chipselect(struct spi_device *spi, int value) if (value != BITBANG_CS_INACTIVE) setsck(spi, spi->mode & SPI_CPOL); - /* no chipselect on this USI link config */ - if (is_usidev(spi)) - return; - /* here, value == "activate or not"; * most PARPORT_CONTROL_* bits are negated, so we must * morph it to value == "bit value to write in control register" @@ -237,24 +200,16 @@ static void butterfly_attach(struct parport *p) int status; struct butterfly *pp; struct spi_master *master; - struct platform_device *pdev; + struct device *dev = p->physport->dev; - if (butterfly) + if (butterfly || !dev) return; /* REVISIT: this just _assumes_ a butterfly is there ... no probe, * and no way to be selective about what it binds to. */ - /* FIXME where should master->cdev.dev come from? - * e.g. /sys/bus/pnp0/00:0b, some PCI thing, etc - * setting up a platform device like this is an ugly kluge... - */ - pdev = platform_device_register_simple("butterfly", -1, NULL, 0); - if (IS_ERR(pdev)) - return; - - master = spi_alloc_master(&pdev->dev, sizeof *pp); + master = spi_alloc_master(dev, sizeof *pp); if (!master) { status = -ENOMEM; goto done; @@ -300,7 +255,7 @@ static void butterfly_attach(struct parport *p) parport_frob_control(pp->port, spi_cs_bit, 0); /* stabilize power with chip in reset (nRESET), and - * both spi_sck_bit and usi_sck_bit clear (CPOL=0) + * spi_sck_bit clear (CPOL=0) */ pp->lastbyte |= vcc_bits; parport_write_data(pp->port, pp->lastbyte); @@ -334,23 +289,6 @@ static void butterfly_attach(struct parport *p) pr_debug("%s: dataflash at %s\n", p->name, pp->dataflash->dev.bus_id); -#ifdef HAVE_USI - /* Bus 2 is only for talking to the AVR, and it can work no - * matter who masters bus 1; needs appropriate AVR firmware. - */ - pp->info[1].max_speed_hz = 10 /* ?? */ * 1000 * 1000; - strcpy(pp->info[1].modalias, "butterfly"); - // pp->info[1].platform_data = ... TBD ... ; - pp->info[1].chip_select = 2, - pp->info[1].controller_data = pp; - pp->butterfly = spi_new_device(pp->bitbang.master, &pp->info[1]); - if (pp->butterfly) - pr_debug("%s: butterfly at %s\n", p->name, - pp->butterfly->dev.bus_id); - - /* FIXME setup ACK for the IRQ line ... */ -#endif - // dev_info(_what?_, ...) pr_info("%s: AVR Butterfly\n", p->name); butterfly = pp; @@ -366,14 +304,12 @@ clean1: clean0: (void) spi_master_put(pp->bitbang.master); done: - platform_device_unregister(pdev); pr_debug("%s: butterfly probe, fail %d\n", p->name, status); } static void butterfly_detach(struct parport *p) { struct butterfly *pp; - struct platform_device *pdev; int status; /* FIXME this global is ugly ... but, how to quickly get from @@ -386,7 +322,6 @@ static void butterfly_detach(struct parport *p) butterfly = NULL; /* stop() unregisters child devices too */ - pdev = to_platform_device(pp->bitbang.master->cdev.dev); status = spi_bitbang_stop(&pp->bitbang); /* turn off VCC */ @@ -397,8 +332,6 @@ static void butterfly_detach(struct parport *p) parport_unregister_device(pp->pd); (void) spi_master_put(pp->bitbang.master); - - platform_device_unregister(pdev); } static struct parport_driver butterfly_driver = { diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c new file mode 100644 index 000000000000..c0a6dce800a3 --- /dev/null +++ b/drivers/spi/spidev.c @@ -0,0 +1,584 @@ +/* + * spidev.c -- simple synchronous userspace interface to SPI devices + * + * Copyright (C) 2006 SWAPP + * Andrea Paterniani <a.paterniani@swapp-eng.it> + * Copyright (C) 2007 David Brownell (simplification, cleanup) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/ioctl.h> +#include <linux/fs.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +#include <linux/spi/spi.h> +#include <linux/spi/spidev.h> + +#include <asm/uaccess.h> + + +/* + * This supports acccess to SPI devices using normal userspace I/O calls. + * Note that while traditional UNIX/POSIX I/O semantics are half duplex, + * and often mask message boundaries, full SPI support requires full duplex + * transfers. There are several kinds of of internal message boundaries to + * handle chipselect management and other protocol options. + * + * SPI has a character major number assigned. We allocate minor numbers + * dynamically using a bitmask. You must use hotplug tools, such as udev + * (or mdev with busybox) to create and destroy the /dev/spidevB.C device + * nodes, since there is no fixed association of minor numbers with any + * particular SPI bus or device. + */ +#define SPIDEV_MAJOR 153 /* assigned */ +#define N_SPI_MINORS 32 /* ... up to 256 */ + +static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; + + +/* Bit masks for spi_device.mode management */ +#define SPI_MODE_MASK (SPI_CPHA | SPI_CPOL) + + +struct spidev_data { + struct device dev; + struct spi_device *spi; + struct list_head device_entry; + + struct mutex buf_lock; + unsigned users; + u8 *buffer; +}; + +static LIST_HEAD(device_list); +static DEFINE_MUTEX(device_list_lock); + +static unsigned bufsiz = 4096; +module_param(bufsiz, uint, S_IRUGO); +MODULE_PARM_DESC(bufsiz, "data bytes in biggest supported SPI message"); + +/*-------------------------------------------------------------------------*/ + +/* Read-only message with current device setup */ +static ssize_t +spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) +{ + struct spidev_data *spidev; + struct spi_device *spi; + ssize_t status = 0; + + /* chipselect only toggles at start or end of operation */ + if (count > bufsiz) + return -EMSGSIZE; + + spidev = filp->private_data; + spi = spidev->spi; + + mutex_lock(&spidev->buf_lock); + status = spi_read(spi, spidev->buffer, count); + if (status == 0) { + unsigned long missing; + + missing = copy_to_user(buf, spidev->buffer, count); + if (count && missing == count) + status = -EFAULT; + else + status = count - missing; + } + mutex_unlock(&spidev->buf_lock); + + return status; +} + +/* Write-only message with current device setup */ +static ssize_t +spidev_write(struct file *filp, const char __user *buf, + size_t count, loff_t *f_pos) +{ + struct spidev_data *spidev; + struct spi_device *spi; + ssize_t status = 0; + unsigned long missing; + + /* chipselect only toggles at start or end of operation */ + if (count > bufsiz) + return -EMSGSIZE; + + spidev = filp->private_data; + spi = spidev->spi; + + mutex_lock(&spidev->buf_lock); + missing = copy_from_user(spidev->buffer, buf, count); + if (missing == 0) { + status = spi_write(spi, spidev->buffer, count); + if (status == 0) + status = count; + } else + status = -EFAULT; + mutex_unlock(&spidev->buf_lock); + + return status; +} + +static int spidev_message(struct spidev_data *spidev, + struct spi_ioc_transfer *u_xfers, unsigned n_xfers) +{ + struct spi_message msg; + struct spi_transfer *k_xfers; + struct spi_transfer *k_tmp; + struct spi_ioc_transfer *u_tmp; + struct spi_device *spi = spidev->spi; + unsigned n, total; + u8 *buf; + int status = -EFAULT; + + spi_message_init(&msg); + k_xfers = kcalloc(n_xfers, sizeof(*k_tmp), GFP_KERNEL); + if (k_xfers == NULL) + return -ENOMEM; + + /* Construct spi_message, copying any tx data to bounce buffer. + * We walk the array of user-provided transfers, using each one + * to initialize a kernel version of the same transfer. + */ + mutex_lock(&spidev->buf_lock); + buf = spidev->buffer; + total = 0; + for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers; + n; + n--, k_tmp++, u_tmp++) { + k_tmp->len = u_tmp->len; + + if (u_tmp->rx_buf) { + k_tmp->rx_buf = buf; + if (!access_ok(VERIFY_WRITE, u_tmp->rx_buf, u_tmp->len)) + goto done; + } + if (u_tmp->tx_buf) { + k_tmp->tx_buf = buf; + if (copy_from_user(buf, (const u8 __user *)u_tmp->tx_buf, + u_tmp->len)) + goto done; + } + + total += k_tmp->len; + if (total > bufsiz) { + status = -EMSGSIZE; + goto done; + } + buf += k_tmp->len; + + k_tmp->cs_change = !!u_tmp->cs_change; + k_tmp->bits_per_word = u_tmp->bits_per_word; + k_tmp->delay_usecs = u_tmp->delay_usecs; + k_tmp->speed_hz = u_tmp->speed_hz; +#ifdef VERBOSE + dev_dbg(&spi->dev, + " xfer len %zd %s%s%s%dbits %u usec %uHz\n", + u_tmp->len, + u_tmp->rx_buf ? "rx " : "", + u_tmp->tx_buf ? "tx " : "", + u_tmp->cs_change ? "cs " : "", + u_tmp->bits_per_word ? : spi->bits_per_word, + u_tmp->delay_usecs, + u_tmp->speed_hz ? : spi->max_speed_hz); +#endif + spi_message_add_tail(k_tmp, &msg); + } + + status = spi_sync(spi, &msg); + if (status < 0) + goto done; + + /* copy any rx data out of bounce buffer */ + buf = spidev->buffer; + for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) { + if (u_tmp->rx_buf) { + if (__copy_to_user((u8 __user *)u_tmp->rx_buf, buf, + u_tmp->len)) { + status = -EFAULT; + goto done; + } + } + buf += u_tmp->len; + } + status = total; + +done: + mutex_unlock(&spidev->buf_lock); + kfree(k_xfers); + return status; +} + +static int +spidev_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + int err = 0; + int retval = 0; + struct spidev_data *spidev; + struct spi_device *spi; + u32 tmp; + unsigned n_ioc; + struct spi_ioc_transfer *ioc; + + /* Check type and command number */ + if (_IOC_TYPE(cmd) != SPI_IOC_MAGIC) + return -ENOTTY; + + /* Check access direction once here; don't repeat below. + * IOC_DIR is from the user perspective, while access_ok is + * from the kernel perspective; so they look reversed. + */ + if (_IOC_DIR(cmd) & _IOC_READ) + err = !access_ok(VERIFY_WRITE, + (void __user *)arg, _IOC_SIZE(cmd)); + if (err == 0 && _IOC_DIR(cmd) & _IOC_WRITE) + err = !access_ok(VERIFY_READ, + (void __user *)arg, _IOC_SIZE(cmd)); + if (err) + return -EFAULT; + + spidev = filp->private_data; + spi = spidev->spi; + + switch (cmd) { + /* read requests */ + case SPI_IOC_RD_MODE: + retval = __put_user(spi->mode & SPI_MODE_MASK, + (__u8 __user *)arg); + break; + case SPI_IOC_RD_LSB_FIRST: + retval = __put_user((spi->mode & SPI_LSB_FIRST) ? 1 : 0, + (__u8 __user *)arg); + break; + case SPI_IOC_RD_BITS_PER_WORD: + retval = __put_user(spi->bits_per_word, (__u8 __user *)arg); + break; + case SPI_IOC_RD_MAX_SPEED_HZ: + retval = __put_user(spi->max_speed_hz, (__u32 __user *)arg); + break; + + /* write requests */ + case SPI_IOC_WR_MODE: + retval = __get_user(tmp, (u8 __user *)arg); + if (retval == 0) { + u8 save = spi->mode; + + if (tmp & ~SPI_MODE_MASK) { + retval = -EINVAL; + break; + } + + tmp |= spi->mode & ~SPI_MODE_MASK; + spi->mode = (u8)tmp; + retval = spi_setup(spi); + if (retval < 0) + spi->mode = save; + else + dev_dbg(&spi->dev, "spi mode %02x\n", tmp); + } + break; + case SPI_IOC_WR_LSB_FIRST: + retval = __get_user(tmp, (__u8 __user *)arg); + if (retval == 0) { + u8 save = spi->mode; + + if (tmp) + spi->mode |= SPI_LSB_FIRST; + else + spi->mode &= ~SPI_LSB_FIRST; + retval = spi_setup(spi); + if (retval < 0) + spi->mode = save; + else + dev_dbg(&spi->dev, "%csb first\n", + tmp ? 'l' : 'm'); + } + break; + case SPI_IOC_WR_BITS_PER_WORD: + retval = __get_user(tmp, (__u8 __user *)arg); + if (retval == 0) { + u8 save = spi->bits_per_word; + + spi->bits_per_word = tmp; + retval = spi_setup(spi); + if (retval < 0) + spi->bits_per_word = save; + else + dev_dbg(&spi->dev, "%d bits per word\n", tmp); + } + break; + case SPI_IOC_WR_MAX_SPEED_HZ: + retval = __get_user(tmp, (__u32 __user *)arg); + if (retval == 0) { + u32 save = spi->max_speed_hz; + + spi->max_speed_hz = tmp; + retval = spi_setup(spi); + if (retval < 0) + spi->max_speed_hz = save; + else + dev_dbg(&spi->dev, "%d Hz (max)\n", tmp); + } + break; + + default: + /* segmented and/or full-duplex I/O request */ + if (_IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0)) + || _IOC_DIR(cmd) != _IOC_WRITE) + return -ENOTTY; + + tmp = _IOC_SIZE(cmd); + if ((tmp % sizeof(struct spi_ioc_transfer)) != 0) { + retval = -EINVAL; + break; + } + n_ioc = tmp / sizeof(struct spi_ioc_transfer); + if (n_ioc == 0) + break; + + /* copy into scratch area */ + ioc = kmalloc(tmp, GFP_KERNEL); + if (!ioc) { + retval = -ENOMEM; + break; + } + if (__copy_from_user(ioc, (void __user *)arg, tmp)) { + retval = -EFAULT; + break; + } + + /* translate to spi_message, execute */ + retval = spidev_message(spidev, ioc, n_ioc); + kfree(ioc); + break; + } + return retval; +} + +static int spidev_open(struct inode *inode, struct file *filp) +{ + struct spidev_data *spidev; + int status = -ENXIO; + + mutex_lock(&device_list_lock); + + list_for_each_entry(spidev, &device_list, device_entry) { + if (spidev->dev.devt == inode->i_rdev) { + status = 0; + break; + } + } + if (status == 0) { + if (!spidev->buffer) { + spidev->buffer = kmalloc(bufsiz, GFP_KERNEL); + if (!spidev->buffer) { + dev_dbg(&spidev->spi->dev, "open/ENOMEM\n"); + status = -ENOMEM; + } + } + if (status == 0) { + spidev->users++; + filp->private_data = spidev; + nonseekable_open(inode, filp); + } + } else + pr_debug("spidev: nothing for minor %d\n", iminor(inode)); + + mutex_unlock(&device_list_lock); + return status; +} + +static int spidev_release(struct inode *inode, struct file *filp) +{ + struct spidev_data *spidev; + int status = 0; + + mutex_lock(&device_list_lock); + spidev = filp->private_data; + filp->private_data = NULL; + spidev->users--; + if (!spidev->users) { + kfree(spidev->buffer); + spidev->buffer = NULL; + } + mutex_unlock(&device_list_lock); + + return status; +} + +static struct file_operations spidev_fops = { + .owner = THIS_MODULE, + /* REVISIT switch to aio primitives, so that userspace + * gets more complete API coverage. It'll simplify things + * too, except for the locking. + */ + .write = spidev_write, + .read = spidev_read, + .ioctl = spidev_ioctl, + .open = spidev_open, + .release = spidev_release, +}; + +/*-------------------------------------------------------------------------*/ + +/* The main reason to have this class is to make mdev/udev create the + * /dev/spidevB.C character device nodes exposing our userspace API. + * It also simplifies memory management. + */ + +static void spidev_classdev_release(struct device *dev) +{ + struct spidev_data *spidev; + + spidev = container_of(dev, struct spidev_data, dev); + kfree(spidev); +} + +static struct class spidev_class = { + .name = "spidev", + .owner = THIS_MODULE, + .dev_release = spidev_classdev_release, +}; + +/*-------------------------------------------------------------------------*/ + +static int spidev_probe(struct spi_device *spi) +{ + struct spidev_data *spidev; + int status; + unsigned long minor; + + /* Allocate driver data */ + spidev = kzalloc(sizeof(*spidev), GFP_KERNEL); + if (!spidev) + return -ENOMEM; + + /* Initialize the driver data */ + spidev->spi = spi; + mutex_init(&spidev->buf_lock); + + INIT_LIST_HEAD(&spidev->device_entry); + + /* If we can allocate a minor number, hook up this device. + * Reusing minors is fine so long as udev or mdev is working. + */ + mutex_lock(&device_list_lock); + minor = find_first_zero_bit(minors, ARRAY_SIZE(minors)); + if (minor < N_SPI_MINORS) { + spidev->dev.parent = &spi->dev; + spidev->dev.class = &spidev_class; + spidev->dev.devt = MKDEV(SPIDEV_MAJOR, minor); + snprintf(spidev->dev.bus_id, sizeof spidev->dev.bus_id, + "spidev%d.%d", + spi->master->bus_num, spi->chip_select); + status = device_register(&spidev->dev); + } else { + dev_dbg(&spi->dev, "no minor number available!\n"); + status = -ENODEV; + } + if (status == 0) { + set_bit(minor, minors); + dev_set_drvdata(&spi->dev, spidev); + list_add(&spidev->device_entry, &device_list); + } + mutex_unlock(&device_list_lock); + + if (status != 0) + kfree(spidev); + + return status; +} + +static int spidev_remove(struct spi_device *spi) +{ + struct spidev_data *spidev = dev_get_drvdata(&spi->dev); + + mutex_lock(&device_list_lock); + + list_del(&spidev->device_entry); + dev_set_drvdata(&spi->dev, NULL); + clear_bit(MINOR(spidev->dev.devt), minors); + device_unregister(&spidev->dev); + + mutex_unlock(&device_list_lock); + + return 0; +} + +static struct spi_driver spidev_spi = { + .driver = { + .name = "spidev", + .owner = THIS_MODULE, + }, + .probe = spidev_probe, + .remove = __devexit_p(spidev_remove), + + /* NOTE: suspend/resume methods are not necessary here. + * We don't do anything except pass the requests to/from + * the underlying controller. The refrigerator handles + * most issues; the controller driver handles the rest. + */ +}; + +/*-------------------------------------------------------------------------*/ + +static int __init spidev_init(void) +{ + int status; + + /* Claim our 256 reserved device numbers. Then register a class + * that will key udev/mdev to add/remove /dev nodes. Last, register + * the driver which manages those device numbers. + */ + BUILD_BUG_ON(N_SPI_MINORS > 256); + status = register_chrdev(SPIDEV_MAJOR, "spi", &spidev_fops); + if (status < 0) + return status; + + status = class_register(&spidev_class); + if (status < 0) { + unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + return status; + } + + status = spi_register_driver(&spidev_spi); + if (status < 0) { + class_unregister(&spidev_class); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); + } + return status; +} +module_init(spidev_init); + +static void __exit spidev_exit(void) +{ + spi_unregister_driver(&spidev_spi); + class_unregister(&spidev_class); + unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); +} +module_exit(spidev_exit); + +MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>"); +MODULE_DESCRIPTION("User mode SPI device interface"); +MODULE_LICENSE("GPL"); diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c index 71cb64e41a1b..c7b0a357b04a 100644 --- a/drivers/telephony/ixj.c +++ b/drivers/telephony/ixj.c @@ -7692,7 +7692,7 @@ static int __init ixj_probe_pci(int *cnt) IXJ *j = NULL; for (i = 0; i < IXJMAX - *cnt; i++) { - pci = pci_find_device(PCI_VENDOR_ID_QUICKNET, + pci = pci_get_device(PCI_VENDOR_ID_QUICKNET, PCI_DEVICE_ID_QUICKNET_XJ, pci); if (!pci) break; @@ -7712,6 +7712,7 @@ static int __init ixj_probe_pci(int *cnt) printk(KERN_INFO "ixj: found Internet PhoneJACK PCI at 0x%x\n", j->DSPbase); ++*cnt; } + pci_dev_put(pci); return probe; } diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 9980a4ddfed9..b847bbc8b0e1 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -85,8 +85,6 @@ source "drivers/usb/class/Kconfig" source "drivers/usb/storage/Kconfig" -source "drivers/usb/input/Kconfig" - source "drivers/usb/image/Kconfig" source "drivers/usb/net/Kconfig" diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index f5de58a63f2b..0ef090b1b37c 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -23,15 +23,6 @@ obj-$(CONFIG_USB_PRINTER) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ obj-$(CONFIG_USB) += storage/ -obj-$(CONFIG_USB_ACECAD) += input/ -obj-$(CONFIG_USB_AIPTEK) += input/ -obj-$(CONFIG_USB_ATI_REMOTE) += input/ -obj-$(CONFIG_USB_KBTAB) += input/ -obj-$(CONFIG_USB_MTOUCH) += input/ -obj-$(CONFIG_USB_POWERMATE) += input/ -obj-$(CONFIG_USB_WACOM) += input/ -obj-$(CONFIG_USB_XPAD) += input/ - obj-$(CONFIG_USB_CATC) += net/ obj-$(CONFIG_USB_KAWETH) += net/ obj-$(CONFIG_USB_PEGASUS) += net/ diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index b3f779f5933a..b082d95bbbaa 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -77,7 +77,6 @@ #include <linux/sched.h> #include <linux/signal.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/stat.h> #include <linux/timer.h> #include <linux/wait.h> diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 14de3b1b6a20..0081c1d12687 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -59,7 +59,6 @@ #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/module.h> -#include <linux/smp_lock.h> #include <linux/mutex.h> #include <asm/uaccess.h> #include <linux/usb.h> diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 6584cf00f7f3..15e740e3a5c4 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -49,7 +49,6 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/signal.h> #include <linux/poll.h> #include <linux/init.h> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bde29ab2b504..f6b74a678de5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -16,7 +16,6 @@ #include <linux/sched.h> #include <linux/list.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/ioctl.h> #include <linux/usb.h> #include <linux/usbdevice_fs.h> diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index cddfc62c4611..cd4f11157280 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -36,7 +36,6 @@ #include <linux/usb.h> #include <linux/namei.h> #include <linux/usbdevice_fs.h> -#include <linux/smp_lock.h> #include <linux/parser.h> #include <linux/notifier.h> #include <asm/byteorder.h> diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index dfd1b5c87ca3..18ddc5e67e39 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -31,7 +31,6 @@ #include <linux/init.h> #include <linux/spinlock.h> #include <linux/errno.h> -#include <linux/smp_lock.h> #include <linux/usb.h> #include <linux/mutex.h> #include <linux/workqueue.h> diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 2a6e3163d944..ba163f35bf21 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -31,7 +31,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/list.h> diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 7d7909cf2558..fcb5526cb085 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -41,7 +41,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 1dd8b57f4420..325bf7cfb83f 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -28,7 +28,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 65c91d3735de..ae931af05cef 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -30,7 +30,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 49d737725f70..52779c52b56d 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -54,7 +54,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index e552668d36b3..f847c3414be3 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -22,7 +22,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 8c85e33f74a4..7078374d0b79 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -67,7 +67,6 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index c7458f7e56cc..099aff64f536 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -24,7 +24,6 @@ #include <linux/ioport.h> #include <linux/sched.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 93107453f124..37b83ba09969 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -97,7 +97,7 @@ static int ps3_ehci_sb_probe(struct ps3_system_bus_device *dev) dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__, __LINE__, dev->m_region->lpar_addr); - result = ps3_alloc_io_irq(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq); + result = ps3_io_irq_setup(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq); if (result) { dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n", @@ -155,7 +155,7 @@ fail_add_hcd: fail_ioremap: usb_put_hcd(hcd); fail_create_hcd: - ps3_free_io_irq(virq); + ps3_io_irq_destroy(virq); fail_irq: ps3_free_mmio_region(dev->m_region); fail_mmio: diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index e8bbe8bc2598..a66637e725f3 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -26,7 +26,6 @@ #include <linux/ioport.h> #include <linux/sched.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 08e237c7bc43..c43b66acd4d5 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -97,8 +97,8 @@ ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match) return -ENODEV; is_bigendian = - device_is_compatible(dn, "ohci-bigendian") || - device_is_compatible(dn, "ohci-be"); + of_device_is_compatible(dn, "ohci-bigendian") || + of_device_is_compatible(dn, "ohci-be"); dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n"); diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index c849f72b508a..d7cf07288b0b 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -99,7 +99,7 @@ static int ps3_ohci_sb_probe(struct ps3_system_bus_device *dev) dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__, __LINE__, dev->m_region->lpar_addr); - result = ps3_alloc_io_irq(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq); + result = ps3_io_irq_setup(PS3_BINDING_CPU_ANY, dev->interrupt_id, &virq); if (result) { dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n", @@ -157,7 +157,7 @@ fail_add_hcd: fail_ioremap: usb_put_hcd(hcd); fail_create_hcd: - ps3_free_io_irq(virq); + ps3_io_irq_destroy(virq); fail_irq: ps3_free_mmio_region(dev->m_region); fail_mmio: diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 5fa5647ea095..4cfa3ff2c993 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -38,7 +38,6 @@ #include <linux/ioport.h> #include <linux/sched.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index a7fa0d75567d..ff0dba01f1c7 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -43,7 +43,6 @@ #include <linux/pci_ids.h> #include <linux/sched.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index d308afd06935..36502a06f73a 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -94,7 +94,6 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/smp_lock.h> #include <linux/wait.h> #include <linux/mutex.h> diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 896cb2b71020..51bd80d2b8cc 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -128,7 +128,6 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/spinlock.h> -#include <linux/smp_lock.h> #include <linux/usb.h> #include <linux/proc_fs.h> diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig deleted file mode 100644 index a792e42f58af..000000000000 --- a/drivers/usb/input/Kconfig +++ /dev/null @@ -1,225 +0,0 @@ -# -# USB Input driver configuration -# -comment "USB Input Devices" - depends on USB - -config USB_AIPTEK - tristate "Aiptek 6000U/8000U tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the Aiptek 6000U - or Aiptek 8000U tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called aiptek. - -config USB_WACOM - tristate "Wacom Intuos/Graphire tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the Wacom Intuos - or Graphire tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called wacom. - -config USB_ACECAD - tristate "Acecad Flair tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the Acecad Flair - tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called acecad. - -config USB_KBTAB - tristate "KB Gear JamStudio tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the KB Gear - JamStudio tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called kbtab. - -config USB_POWERMATE - tristate "Griffin PowerMate and Contour Jog support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use Griffin PowerMate or Contour Jog devices. - These are aluminum dials which can measure clockwise and anticlockwise - rotation. The dial also acts as a pushbutton. The base contains an LED - which can be instructed to pulse or to switch to a particular intensity. - - You can download userspace tools from - <http://sowerbutts.com/powermate/>. - - To compile this driver as a module, choose M here: the - module will be called powermate. - -config USB_TOUCHSCREEN - tristate "USB Touchscreen Driver" - depends on USB && INPUT - ---help--- - USB Touchscreen driver for: - - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) - - PanJit TouchSet USB - - 3M MicroTouch USB (EX II series) - - ITM - - some other eTurboTouch - - Gunze AHL61 - - DMC TSC-10/25 - - Have a look at <http://linux.chapter7.ch/touchkit/> for - a usage description and the required user-space stuff. - - To compile this driver as a module, choose M here: the - module will be called usbtouchscreen. - -config USB_TOUCHSCREEN_EGALAX - default y - bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_PANJIT - default y - bool "PanJit device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_3M - default y - bool "3M/Microtouch EX II series device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_ITM - default y - bool "ITM device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_ETURBO - default y - bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_GUNZE - default y - bool "Gunze AHL61 device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_DMC_TSC10 - default y - bool "DMC TSC-10/25 device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_YEALINK - tristate "Yealink usb-p1k voip phone" - depends on USB && INPUT && EXPERIMENTAL - ---help--- - Say Y here if you want to enable keyboard and LCD functions of the - Yealink usb-p1k usb phones. The audio part is enabled by the generic - usb sound driver, so you might want to enable that as well. - - For information about how to use these additional functions, see - <file:Documentation/input/yealink.txt>. - - To compile this driver as a module, choose M here: the module will be - called yealink. - -config USB_XPAD - tristate "X-Box gamepad support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use the X-Box pad with your computer. - Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV) - and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. - - For information about how to connect the X-Box pad to USB, see - <file:Documentation/input/xpad.txt>. - - To compile this driver as a module, choose M here: the - module will be called xpad. - -config USB_ATI_REMOTE - tristate "ATI / X10 USB RF remote control" - depends on USB && INPUT - ---help--- - Say Y here if you want to use an ATI or X10 "Lola" USB remote control. - These are RF remotes with USB receivers. - The ATI remote comes with many of ATI's All-In-Wonder video cards. - The X10 "Lola" remote is available at: - <http://www.x10.com/products/lola_sg1.htm> - This driver provides mouse pointer, left and right mouse buttons, - and maps all the other remote buttons to keypress events. - - To compile this driver as a module, choose M here: the module will be - called ati_remote. - -config USB_ATI_REMOTE2 - tristate "ATI / Philips USB RF remote control" - depends on USB && INPUT - ---help--- - Say Y here if you want to use an ATI or Philips USB RF remote control. - These are RF remotes with USB receivers. - ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards - and is also available as a separate product. - This driver provides mouse pointer, left and right mouse buttons, - and maps all the other remote buttons to keypress events. - - To compile this driver as a module, choose M here: the module will be - called ati_remote2. - -config USB_KEYSPAN_REMOTE - tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" - depends on USB && INPUT && EXPERIMENTAL - ---help--- - Say Y here if you want to use a Keyspan DMR USB remote control. - Currently only the UIA-11 type of receiver has been tested. The tag - on the receiver that connects to the USB port should have a P/N that - will tell you what type of DMR you have. The UIA-10 type is not - supported at this time. This driver maps all buttons to keypress - events. - - To compile this driver as a module, choose M here: the module will - be called keyspan_remote. - -config USB_APPLETOUCH - tristate "Apple USB Touchpad support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use an Apple USB Touchpad. - - These are the touchpads that can be found on post-February 2005 - Apple Powerbooks (prior models have a Synaptics touchpad connected - to the ADB bus). - - This driver provides a basic mouse driver but can be interfaced - with the synaptics X11 driver to provide acceleration and - scrolling in X11. - - For further information, see - <file:Documentation/input/appletouch.txt>. - - To compile this driver as a module, choose M here: the - module will be called appletouch. - -config USB_GTCO - tristate "GTCO CalComp/InterWrite USB Support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use the USB version of the GTCO - CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called gtco. diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile deleted file mode 100644 index 284a0734e0cd..000000000000 --- a/drivers/usb/input/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# -# Makefile for the USB input drivers -# - -# Multipart objects. -wacom-objs := wacom_wac.o wacom_sys.o - -obj-$(CONFIG_USB_AIPTEK) += aiptek.o -obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o -obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o -obj-$(CONFIG_USB_KBTAB) += kbtab.o -obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o -obj-$(CONFIG_USB_TOUCHSCREEN) += usbtouchscreen.o -obj-$(CONFIG_USB_POWERMATE) += powermate.o -obj-$(CONFIG_USB_WACOM) += wacom.o -obj-$(CONFIG_USB_ACECAD) += acecad.o -obj-$(CONFIG_USB_YEALINK) += yealink.o -obj-$(CONFIG_USB_XPAD) += xpad.o -obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o -obj-$(CONFIG_USB_GTCO) += gtco.o - -ifeq ($(CONFIG_USB_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 15c70bd048c4..8d0e360636e6 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -22,7 +22,6 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/smp_lock.h> #include <linux/completion.h> #include <linux/mutex.h> #include <asm/uaccess.h> diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 5dce797bddb7..1713e19a7899 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -80,7 +80,6 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> -#include <linux/smp_lock.h> #include <linux/completion.h> #include <linux/mutex.h> #include <asm/uaccess.h> diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index fdf68479a166..88f6abe73624 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -39,7 +39,6 @@ #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/usb.h> -#include <linux/smp_lock.h> #include <linux/wait.h> #include "rio500_usb.h" diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c index 1730d8642a47..5947afb0017e 100644 --- a/drivers/usb/misc/sisusbvga/sisusb_con.c +++ b/drivers/usb/misc/sisusbvga/sisusb_con.c @@ -62,7 +62,6 @@ #include <linux/selection.h> #include <linux/spinlock.h> #include <linux/kref.h> -#include <linux/smp_lock.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/vmalloc.h> @@ -322,7 +321,7 @@ sisusbcon_deinit(struct vc_data *c) /* interface routine */ static u8 sisusbcon_build_attr(struct vc_data *c, u8 color, u8 intensity, - u8 blink, u8 underline, u8 reverse) + u8 blink, u8 underline, u8 reverse, u8 unused) { u8 attr = color; diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 8a1df2c9c73e..8977ec0d0f99 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -9,7 +9,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/usb.h> -#include <linux/smp_lock.h> #include <linux/notifier.h> #include <linux/mutex.h> diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 7639022cdf84..87f378806db6 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -28,7 +28,6 @@ #include <linux/spinlock.h> #include <linux/mutex.h> #include <linux/list.h> -#include <linux/smp_lock.h> #include <asm/uaccess.h> #include <linux/usb.h> #include <linux/usb/serial.h> diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 21f3ddbc9080..6dac1ffdde86 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -47,7 +47,6 @@ #include <linux/usb.h> #include <linux/usb_usual.h> #include <linux/blkdev.h> -#include <linux/smp_lock.h> #include <linux/completion.h> #include <linux/mutex.h> #include <scsi/scsi_host.h> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 344c37595305..1132ba5ff391 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -5,6 +5,11 @@ menu "Graphics support" source "drivers/video/backlight/Kconfig" +source "drivers/video/display/Kconfig" + +config VGASTATE + tristate + default n config FB tristate "Support for frame buffer devices" @@ -90,6 +95,43 @@ config FB_CFB_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version. +config FB_SYS_FILLRECT + tristate + depends on FB + default n + ---help--- + Include the sys_fillrect function for generic software rectangle + filling. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_COPYAREA + tristate + depends on FB + default n + ---help--- + Include the sys_copyarea function for generic software area copying. + This is used by drivers that don't provide their own (accelerated) + version and the framebuffer is in system RAM. + +config FB_SYS_IMAGEBLIT + tristate + depends on FB + default n + ---help--- + Include the sys_imageblit function for generic software image + blitting. This is used by drivers that don't provide their own + (accelerated) version and the framebuffer is in system RAM. + +config FB_SYS_FOPS + tristate + depends on FB + default n + +config FB_DEFERRED_IO + bool + depends on FB + default y + config FB_SVGALIB tristate depends on FB @@ -375,9 +417,10 @@ config FB_FM2 config FB_ARC tristate "Arc Monochrome LCD board support" depends on FB && X86 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix @@ -475,6 +518,8 @@ config FB_VGA16 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -519,15 +564,25 @@ config FB_HP300 default y config FB_TGA - tristate "TGA framebuffer support" - depends on FB && ALPHA + tristate "TGA/SFB+ framebuffer support" + depends on FB && (ALPHA || TC) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE - help - This is the frame buffer device driver for generic TGA graphic - cards. Say Y if you have one of those. + ---help--- + This is the frame buffer device driver for generic TGA and SFB+ + graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, + also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 + TURBOchannel cards, also known as PMAGD-A, -B and -C. + + Due to hardware limitations ZLX-E2 and E3 cards are not supported + for DECstation 5000/200 systems. Additionally due to firmware + limitations these cards may cause troubles with booting DECstation + 5000/240 and /260 systems, but are fully supported under Linux if + you manage to get it going. ;-) + + Say Y if you have one of those. config FB_VESA bool "VESA VGA graphics support" @@ -551,6 +606,21 @@ config FB_IMAC help This is the frame buffer device driver for the Intel-based Macintosh +config FB_HECUBA + tristate "Hecuba board support" + depends on FB && X86 && MMU + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_DEFERRED_IO + help + This enables support for the Hecuba board. This driver was tested + with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO + interface (8 bit data, 4 bit control). If you anticpate using + this driver, say Y or M; otherwise say N. You must specify the + GPIO IO address to be used for setting control and data. + config FB_HGA tristate "Hercules mono graphics support" depends on FB && X86 @@ -686,6 +756,7 @@ config FB_NVIDIA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -724,6 +795,7 @@ config FB_RIVA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE + select VGASTATE help This driver supports graphics boards with the nVidia Riva/Geforce chips. @@ -770,6 +842,7 @@ config FB_I810 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports the on-board graphics built in to the Intel 810 and 815 chipsets. Say Y if you have and plan to use such a board. @@ -809,6 +882,22 @@ config FB_I810_I2C select FB_DDC help +config FB_LE80578 + tristate "Intel LE80578 (Vermilion) support" + depends on FB && PCI && X86 + select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This driver supports the LE80578 (Vermilion Range) chipset + +config FB_CARILLO_RANCH + tristate "Intel Carillo Ranch support" + depends on FB_LE80578 && FB && PCI && X86 + help + This driver supports the LE80578 (Carillo Ranch) board + config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)" depends on FB && EXPERIMENTAL && PCI && X86 @@ -1120,6 +1209,8 @@ config FB_S3 select FB_CFB_IMAGEBLIT select FB_TILEBLITTING select FB_SVGALIB + select VGASTATE + select FONT_8x16 if FRAMEBUFFER_CONSOLE ---help--- Driver for graphics boards with S3 Trio / S3 Virge chip. @@ -1130,6 +1221,7 @@ config FB_SAVAGE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1196,6 +1288,7 @@ config FB_NEOMAGIC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select VGASTATE help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1662,13 +1755,25 @@ config FB_PS3_DEFAULT_SIZE_M The default value can be overridden on the kernel command line using the "ps3fb" option (e.g. "ps3fb=9M"); -config FB_VIRTUAL - tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" - depends on FB +config FB_XILINX + tristate "Xilinx frame buffer support" + depends on FB && XILINX_VIRTEX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- + Include support for the Xilinx ML300/ML403 reference design + framebuffer. ML300 carries a 640*480 LCD display on the board, + ML403 uses a standard DB15 VGA connector. + +config FB_VIRTUAL + tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" + depends on FB + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics board. This means you cannot see any output sent to this frame diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 558473d040d6..a916c204274f 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -4,6 +4,7 @@ # Each configuration option enables a list of files. +obj-$(CONFIG_VGASTATE) += vgastate.o obj-y += fb_notify.o obj-$(CONFIG_FB) += fb.o fb-y := fbmem.o fbmon.o fbcmap.o fbsysfs.o \ @@ -12,14 +13,19 @@ fb-objs := $(fb-y) obj-$(CONFIG_VT) += console/ obj-$(CONFIG_LOGO) += logo/ -obj-y += backlight/ +obj-y += backlight/ display/ obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o +obj-$(CONFIG_FB_SYS_FILLRECT) += sysfillrect.o +obj-$(CONFIG_FB_SYS_COPYAREA) += syscopyarea.o +obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o +obj-$(CONFIG_FB_SYS_FOPS) += fb_sys_fops.o obj-$(CONFIG_FB_SVGALIB) += svgalib.o obj-$(CONFIG_FB_MACMODES) += macmodes.o obj-$(CONFIG_FB_DDC) += fb_ddc.o +obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o # Hardware specific drivers go first obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o @@ -30,7 +36,7 @@ obj-$(CONFIG_FB_PM2) += pm2fb.o obj-$(CONFIG_FB_PM3) += pm3fb.o obj-$(CONFIG_FB_MATROX) += matrox/ -obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o +obj-$(CONFIG_FB_RIVA) += riva/ obj-$(CONFIG_FB_NVIDIA) += nvidia/ obj-$(CONFIG_FB_ATY) += aty/ macmodes.o obj-$(CONFIG_FB_ATY128) += aty/ macmodes.o @@ -40,8 +46,7 @@ obj-$(CONFIG_FB_KYRO) += kyro/ obj-$(CONFIG_FB_SAVAGE) += savage/ obj-$(CONFIG_FB_GEODE) += geode/ obj-$(CONFIG_FB_MBX) += mbx/ -obj-$(CONFIG_FB_I810) += vgastate.o -obj-$(CONFIG_FB_NEOMAGIC) += neofb.o vgastate.o +obj-$(CONFIG_FB_NEOMAGIC) += neofb.o obj-$(CONFIG_FB_3DFX) += tdfxfb.o obj-$(CONFIG_FB_CONTROL) += controlfb.o obj-$(CONFIG_FB_PLATINUM) += platinumfb.o @@ -51,7 +56,8 @@ obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_FM2) += fm2fb.o obj-$(CONFIG_FB_CYBLA) += cyblafb.o obj-$(CONFIG_FB_TRIDENT) += tridentfb.o -obj-$(CONFIG_FB_S3) += s3fb.o vgastate.o +obj-$(CONFIG_FB_LE80578) += vermilion/ +obj-$(CONFIG_FB_S3) += s3fb.o obj-$(CONFIG_FB_STI) += stifb.o obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o obj-$(CONFIG_FB_CG6) += cg6.o sbuslib.o @@ -66,6 +72,7 @@ obj-$(CONFIG_FB_ACORN) += acornfb.o obj-$(CONFIG_FB_ATARI) += atafb.o c2p.o atafb_mfb.o \ atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o obj-$(CONFIG_FB_MAC) += macfb.o +obj-$(CONFIG_FB_HECUBA) += hecubafb.o obj-$(CONFIG_FB_HGA) += hgafb.o obj-$(CONFIG_FB_XVR500) += sunxvr500.o obj-$(CONFIG_FB_XVR2500) += sunxvr2500.o @@ -102,11 +109,12 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/ obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o obj-$(CONFIG_FB_PS3) += ps3fb.o obj-$(CONFIG_FB_SM501) += sm501fb.o +obj-$(CONFIG_FB_XILINX) += xilinxfb.o # Platform or fallback drivers go here obj-$(CONFIG_FB_VESA) += vesafb.o obj-$(CONFIG_FB_IMAC) += imacfb.o -obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o +obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o # the test framebuffer is last diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c index 30a8369757e7..db15baca3f7b 100644 --- a/drivers/video/arcfb.c +++ b/drivers/video/arcfb.c @@ -262,7 +262,8 @@ static void arcfb_lcd_update_page(struct arcfb_par *par, unsigned int upper, ks108_set_yaddr(par, chipindex, upper/8); linesize = par->info->var.xres/8; - src = par->info->screen_base + (left/8) + (upper * linesize); + src = (unsigned char __force *) par->info->screen_base + (left/8) + + (upper * linesize); ks108_set_xaddr(par, chipindex, left); bitmask=1; @@ -368,7 +369,7 @@ static void arcfb_fillrect(struct fb_info *info, { struct arcfb_par *par = info->par; - cfb_fillrect(info, rect); + sys_fillrect(info, rect); /* update the physical lcd */ arcfb_lcd_update(par, rect->dx, rect->dy, rect->width, rect->height); @@ -379,7 +380,7 @@ static void arcfb_copyarea(struct fb_info *info, { struct arcfb_par *par = info->par; - cfb_copyarea(info, area); + sys_copyarea(info, area); /* update the physical lcd */ arcfb_lcd_update(par, area->dx, area->dy, area->width, area->height); @@ -389,7 +390,7 @@ static void arcfb_imageblit(struct fb_info *info, const struct fb_image *image) { struct arcfb_par *par = info->par; - cfb_imageblit(info, image); + sys_imageblit(info, image); /* update the physical lcd */ arcfb_lcd_update(par, image->dx, image->dy, image->width, @@ -439,14 +440,11 @@ static int arcfb_ioctl(struct fb_info *info, * the fb. it's inefficient for them to do anything less than 64*8 * writes since we update the lcd in each write() anyway. */ -static ssize_t arcfb_write(struct file *file, const char __user *buf, size_t count, - loff_t *ppos) +static ssize_t arcfb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) { /* modded from epson 1355 */ - struct inode *inode; - int fbidx; - struct fb_info *info; unsigned long p; int err=-EINVAL; unsigned int fbmemlength,x,y,w,h, bitppos, startpos, endpos, bitcount; @@ -454,13 +452,6 @@ static ssize_t arcfb_write(struct file *file, const char __user *buf, size_t cou unsigned int xres; p = *ppos; - inode = file->f_path.dentry->d_inode; - fbidx = iminor(inode); - info = registered_fb[fbidx]; - - if (!info || !info->screen_base) - return -ENODEV; - par = info->par; xres = info->var.xres; fbmemlength = (xres * info->var.yres)/8; @@ -477,7 +468,7 @@ static ssize_t arcfb_write(struct file *file, const char __user *buf, size_t cou if (count) { char *base_addr; - base_addr = info->screen_base; + base_addr = (char __force *)info->screen_base; count -= copy_from_user(base_addr + p, buf, count); *ppos += count; err = -EFAULT; @@ -503,6 +494,7 @@ static ssize_t arcfb_write(struct file *file, const char __user *buf, size_t cou static struct fb_ops arcfb_ops = { .owner = THIS_MODULE, .fb_open = arcfb_open, + .fb_read = fb_sys_read, .fb_write = arcfb_write, .fb_release = arcfb_release, .fb_pan_display = arcfb_pan_display, @@ -603,7 +595,7 @@ static int arcfb_remove(struct platform_device *dev) if (info) { unregister_framebuffer(info); - vfree(info->screen_base); + vfree((void __force *)info->screen_base); framebuffer_release(info); } return 0; diff --git a/drivers/video/aty/ati_ids.h b/drivers/video/aty/ati_ids.h index 39ab483fc250..90e7df22f508 100644 --- a/drivers/video/aty/ati_ids.h +++ b/drivers/video/aty/ati_ids.h @@ -209,4 +209,4 @@ #define PCI_CHIP_R423_5D57 0x5D57 #define PCI_CHIP_RS350_7834 0x7834 #define PCI_CHIP_RS350_7835 0x7835 - +#define PCI_CHIP_RS480_5955 0x5955 diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index e86d7e0c9825..7fea4d8ae8e2 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -2165,18 +2165,29 @@ static void __devexit aty128_remove(struct pci_dev *pdev) static int aty128fb_blank(int blank, struct fb_info *fb) { struct aty128fb_par *par = fb->par; - u8 state = 0; + u8 state; if (par->lock_blank || par->asleep) return 0; - if (blank & FB_BLANK_VSYNC_SUSPEND) - state |= 2; - if (blank & FB_BLANK_HSYNC_SUSPEND) - state |= 1; - if (blank & FB_BLANK_POWERDOWN) - state |= 4; - + switch (blank) { + case FB_BLANK_NORMAL: + state = 4; + break; + case FB_BLANK_VSYNC_SUSPEND: + state = 6; + break; + case FB_BLANK_HSYNC_SUSPEND: + state = 5; + break; + case FB_BLANK_POWERDOWN: + state = 7; + break; + case FB_BLANK_UNBLANK: + default: + state = 0; + break; + } aty_st_8(CRTC_EXT_CNTL+1, state); if (par->chip_gen == rage_M3) { @@ -2430,7 +2441,7 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state) wait_for_idle(par); /* Blank display and LCD */ - aty128fb_blank(VESA_POWERDOWN, info); + aty128fb_blank(FB_BLANK_POWERDOWN, info); /* Sleep */ par->asleep = 1; diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index 8514f2a6f060..ea67dd902d4e 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -2297,20 +2297,6 @@ static int __devinit aty_init(struct fb_info *info) par->pll_limits.xclk = 53; } #endif - if (pll) - par->pll_limits.pll_max = pll; - if (mclk) - par->pll_limits.mclk = mclk; - if (xclk) - par->pll_limits.xclk = xclk; - - aty_calc_mem_refresh(par, par->pll_limits.xclk); - par->pll_per = 1000000/par->pll_limits.pll_max; - par->mclk_per = 1000000/par->pll_limits.mclk; - par->xclk_per = 1000000/par->pll_limits.xclk; - - par->ref_clk_per = 1000000000000ULL / 14318180; - xtal = "14.31818"; #ifdef CONFIG_FB_ATY_GX if (!M64_HAS(INTEGRATED)) { @@ -2338,6 +2324,7 @@ static int __devinit aty_init(struct fb_info *info) case DAC_IBMRGB514: par->dac_ops = &aty_dac_ibm514; break; +#ifdef CONFIG_ATARI case DAC_ATI68860_B: case DAC_ATI68860_C: par->dac_ops = &aty_dac_ati68860b; @@ -2346,6 +2333,7 @@ static int __devinit aty_init(struct fb_info *info) case DAC_ATT21C498: par->dac_ops = &aty_dac_att21c498; break; +#endif default: PRINTKI("aty_init: DAC type not implemented yet!\n"); par->dac_ops = &aty_dac_unsupported; @@ -2389,8 +2377,29 @@ static int __devinit aty_init(struct fb_info *info) /* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */ if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM) par->pll_limits.mclk = 63; + /* Mobility + 32bit memory interface need halved XCLK. */ + if (M64_HAS(MOBIL_BUS) && par->ram_type == SDRAM32) + par->pll_limits.xclk = (par->pll_limits.xclk + 1) >> 1; } +#endif + /* Allow command line to override clocks. */ + if (pll) + par->pll_limits.pll_max = pll; + if (mclk) + par->pll_limits.mclk = mclk; + if (xclk) + par->pll_limits.xclk = xclk; + + aty_calc_mem_refresh(par, par->pll_limits.xclk); + par->pll_per = 1000000/par->pll_limits.pll_max; + par->mclk_per = 1000000/par->pll_limits.mclk; + par->xclk_per = 1000000/par->pll_limits.xclk; + + par->ref_clk_per = 1000000000000ULL / 14318180; + xtal = "14.31818"; + +#ifdef CONFIG_FB_ATY_CT if (M64_HAS(GTB_DSP)) { u8 pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par); diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/aty/mach64_ct.c index 1fdcfdbf669b..cc9e9779b75f 100644 --- a/drivers/video/aty/mach64_ct.c +++ b/drivers/video/aty/mach64_ct.c @@ -608,12 +608,10 @@ static void aty_resume_pll_ct(const struct fb_info *info, aty_st_pll_ct(SCLK_FB_DIV, pll->ct.sclk_fb_div, par); aty_st_pll_ct(SPLL_CNTL2, pll->ct.spll_cntl2, par); /* - * The sclk has been started. However, I believe the first clock - * ticks it generates are not very stable. Hope this primitive loop - * helps for Rage Mobilities that sometimes crash when - * we switch to sclk. (Daniel Mantione, 13-05-2003) + * SCLK has been started. Wait for the PLL to lock. 5 ms + * should be enough according to mach64 programmer's guide. */ - udelay(500); + mdelay(5); } aty_st_pll_ct(PLL_REF_DIV, pll->ct.pll_ref_div, par); diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index a4b3fd185de7..2ce050193018 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -100,6 +100,8 @@ { PCI_VENDOR_ID_ATI, id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (flags) | (CHIP_FAMILY_##family) } static struct pci_device_id radeonfb_pci_table[] = { + /* Radeon Xpress 200m */ + CHIP_DEF(PCI_CHIP_RS480_5955, RS480, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), /* Mobility M6 */ CHIP_DEF(PCI_CHIP_RADEON_LY, RV100, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), CHIP_DEF(PCI_CHIP_RADEON_LZ, RV100, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), @@ -422,7 +424,7 @@ static int __devinit radeon_read_xtal_OF (struct radeonfb_info *rinfo) if (dp == NULL) return -ENODEV; - val = get_property(dp, "ATY,RefCLK", NULL); + val = of_get_property(dp, "ATY,RefCLK", NULL); if (!val || !*val) { printk(KERN_WARNING "radeonfb: No ATY,RefCLK property !\n"); return -EINVAL; @@ -430,11 +432,11 @@ static int __devinit radeon_read_xtal_OF (struct radeonfb_info *rinfo) rinfo->pll.ref_clk = (*val) / 10; - val = get_property(dp, "ATY,SCLK", NULL); + val = of_get_property(dp, "ATY,SCLK", NULL); if (val && *val) rinfo->pll.sclk = (*val) / 10; - val = get_property(dp, "ATY,MCLK", NULL); + val = of_get_property(dp, "ATY,MCLK", NULL); if (val && *val) rinfo->pll.mclk = (*val) / 10; @@ -1994,7 +1996,8 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo) /* framebuffer size */ if ((rinfo->family == CHIP_FAMILY_RS100) || (rinfo->family == CHIP_FAMILY_RS200) || - (rinfo->family == CHIP_FAMILY_RS300)) { + (rinfo->family == CHIP_FAMILY_RS300) || + (rinfo->family == CHIP_FAMILY_RS480) ) { u32 tom = INREG(NB_TOM); tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024); diff --git a/drivers/video/aty/radeon_monitor.c b/drivers/video/aty/radeon_monitor.c index 737b5c09dbdb..2030ed813429 100644 --- a/drivers/video/aty/radeon_monitor.c +++ b/drivers/video/aty/radeon_monitor.c @@ -70,7 +70,7 @@ static int __devinit radeon_parse_montype_prop(struct device_node *dp, u8 **out_ int i, mt = MT_NONE; RTRACE("analyzing OF properties...\n"); - pmt = get_property(dp, "display-type", NULL); + pmt = of_get_property(dp, "display-type", NULL); if (!pmt) return MT_NONE; RTRACE("display-type: %s\n", pmt); @@ -89,7 +89,7 @@ static int __devinit radeon_parse_montype_prop(struct device_node *dp, u8 **out_ } for (i = 0; propnames[i] != NULL; ++i) { - pedid = get_property(dp, propnames[i], NULL); + pedid = of_get_property(dp, propnames[i], NULL); if (pedid != NULL) break; } @@ -98,9 +98,10 @@ static int __devinit radeon_parse_montype_prop(struct device_node *dp, u8 **out_ * single-head cards have hdno == -1 and skip this step */ if (pedid == NULL && dp->parent && (hdno != -1)) - pedid = get_property(dp->parent, (hdno == 0) ? "EDID1" : "EDID2", NULL); + pedid = of_get_property(dp->parent, + (hdno == 0) ? "EDID1" : "EDID2", NULL); if (pedid == NULL && dp->parent && (hdno == 0)) - pedid = get_property(dp->parent, "EDID", NULL); + pedid = of_get_property(dp->parent, "EDID", NULL); if (pedid == NULL) return mt; @@ -130,7 +131,7 @@ static int __devinit radeon_probe_OF_head(struct radeonfb_info *rinfo, int head_ do { if (!dp) return MT_NONE; - pname = get_property(dp, "name", NULL); + pname = of_get_property(dp, "name", NULL); if (!pname) return MT_NONE; len = strlen(pname); diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index c411293cefc8..be1d57bf9dc8 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -1290,7 +1290,7 @@ static void radeon_pm_full_reset_sdram(struct radeonfb_info *rinfo) if (rinfo->of_node != NULL) { int size; - mrtable = get_property(rinfo->of_node, "ATY,MRT", &size); + mrtable = of_get_property(rinfo->of_node, "ATY,MRT", &size); if (mrtable) mrtable_size = size >> 2; else @@ -2826,11 +2826,15 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk, int ignore_devlis rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM); /* Enable/Disable dynamic clocks: TODO add sysfs access */ - rinfo->dynclk = dynclk; - if (dynclk == 1) { + if (rinfo->family == CHIP_FAMILY_RS480) + rinfo->dynclk = -1; + else + rinfo->dynclk = dynclk; + + if (rinfo->dynclk == 1) { radeon_pm_enable_dynamic_mode(rinfo); printk("radeonfb: Dynamic Clock Power Management enabled\n"); - } else if (dynclk == 0) { + } else if (rinfo->dynclk == 0) { radeon_pm_disable_dynamic_mode(rinfo); printk("radeonfb: Dynamic Clock Power Management disabled\n"); } diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index 319000360285..7ebffcdfd1e3 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -48,6 +48,7 @@ enum radeon_family { CHIP_FAMILY_RV350, CHIP_FAMILY_RV380, /* RV370/RV380/M22/M24 */ CHIP_FAMILY_R420, /* R420/R423/M18 */ + CHIP_FAMILY_RS480, CHIP_FAMILY_LAST, }; @@ -64,7 +65,8 @@ enum radeon_family { ((rinfo)->family == CHIP_FAMILY_RV350) || \ ((rinfo)->family == CHIP_FAMILY_R350) || \ ((rinfo)->family == CHIP_FAMILY_RV380) || \ - ((rinfo)->family == CHIP_FAMILY_R420)) + ((rinfo)->family == CHIP_FAMILY_R420) || \ + ((rinfo)->family == CHIP_FAMILY_RS480) ) /* * Chip flags diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 47d15b5d985a..fbef663fc057 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -63,3 +63,11 @@ config BACKLIGHT_PROGEAR help If you have a Frontpath ProGear say Y to enable the backlight driver. + +config BACKLIGHT_CARILLO_RANCH + tristate "Intel Carillo Ranch Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 + default n + help + If you have a Intel LE80578 (Carillo Ranch) say Y to enable the + backlight driver. diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 0c3ce46f5094..c6e2266f63e2 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o +obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c new file mode 100644 index 000000000000..e9bbc3455c94 --- /dev/null +++ b/drivers/video/backlight/cr_bllcd.c @@ -0,0 +1,287 @@ +/* + * Copyright (c) Intel Corp. 2007. + * All Rights Reserved. + * + * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to + * develop this driver. + * + * This file is part of the Carillo Ranch video subsystem driver. + * The Carillo Ranch video subsystem driver is free software; + * you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The Carillo Ranch video subsystem driver is distributed + * in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: + * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com> + * Alan Hourihane <alanh-at-tungstengraphics-dot-com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/lcd.h> +#include <linux/pci.h> +#include <asm/uaccess.h> + +/* The LVDS- and panel power controls sits on the + * GPIO port of the ISA bridge. + */ + +#define CRVML_DEVICE_LPC 0x27B8 +#define CRVML_REG_GPIOBAR 0x48 +#define CRVML_REG_GPIOEN 0x4C +#define CRVML_GPIOEN_BIT (1 << 4) +#define CRVML_PANEL_PORT 0x38 +#define CRVML_LVDS_ON 0x00000001 +#define CRVML_PANEL_ON 0x00000002 +#define CRVML_BACKLIGHT_OFF 0x00000004 + +/* The PLL Clock register sits on Host bridge */ +#define CRVML_DEVICE_MCH 0x5001 +#define CRVML_REG_MCHBAR 0x44 +#define CRVML_REG_MCHEN 0x54 +#define CRVML_MCHEN_BIT (1 << 28) +#define CRVML_MCHMAP_SIZE 4096 +#define CRVML_REG_CLOCK 0xc3c +#define CRVML_CLOCK_SHIFT 8 +#define CRVML_CLOCK_MASK 0x00000f00 + +static struct pci_dev *lpc_dev; +static u32 gpio_bar; + +struct cr_panel { + struct backlight_device *cr_backlight_device; + struct lcd_device *cr_lcd_device; +}; + +static int cr_backlight_set_intensity(struct backlight_device *bd) +{ + int intensity = bd->props.brightness; + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + + if (bd->props.power == FB_BLANK_UNBLANK) + intensity = FB_BLANK_UNBLANK; + if (bd->props.fb_blank == FB_BLANK_UNBLANK) + intensity = FB_BLANK_UNBLANK; + if (bd->props.power == FB_BLANK_POWERDOWN) + intensity = FB_BLANK_POWERDOWN; + if (bd->props.fb_blank == FB_BLANK_POWERDOWN) + intensity = FB_BLANK_POWERDOWN; + + if (intensity == FB_BLANK_UNBLANK) { /* FULL ON */ + cur &= ~CRVML_BACKLIGHT_OFF; + outl(cur, addr); + } else if (intensity == FB_BLANK_POWERDOWN) { /* OFF */ + cur |= CRVML_BACKLIGHT_OFF; + outl(cur, addr); + } /* anything else, don't bother */ + + return 0; +} + +static int cr_backlight_get_intensity(struct backlight_device *bd) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + u8 intensity; + + if (cur & CRVML_BACKLIGHT_OFF) + intensity = FB_BLANK_POWERDOWN; + else + intensity = FB_BLANK_UNBLANK; + + return intensity; +} + +static struct backlight_ops cr_backlight_ops = { + .get_brightness = cr_backlight_get_intensity, + .update_status = cr_backlight_set_intensity, +}; + +static void cr_panel_on(void) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + + if (!(cur & CRVML_PANEL_ON)) { + /* Make sure LVDS controller is down. */ + if (cur & 0x00000001) { + cur &= ~CRVML_LVDS_ON; + outl(cur, addr); + } + /* Power up Panel */ + schedule_timeout(HZ / 10); + cur |= CRVML_PANEL_ON; + outl(cur, addr); + } + + /* Power up LVDS controller */ + + if (!(cur & CRVML_LVDS_ON)) { + schedule_timeout(HZ / 10); + outl(cur | CRVML_LVDS_ON, addr); + } +} + +static void cr_panel_off(void) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + + /* Power down LVDS controller first to avoid high currents */ + if (cur & CRVML_LVDS_ON) { + cur &= ~CRVML_LVDS_ON; + outl(cur, addr); + } + if (cur & CRVML_PANEL_ON) { + schedule_timeout(HZ / 10); + outl(cur & ~CRVML_PANEL_ON, addr); + } +} + +static int cr_lcd_set_power(struct lcd_device *ld, int power) +{ + if (power == FB_BLANK_UNBLANK) + cr_panel_on(); + if (power == FB_BLANK_POWERDOWN) + cr_panel_off(); + + return 0; +} + +static struct lcd_ops cr_lcd_ops = { + .set_power = cr_lcd_set_power, +}; + +static int cr_backlight_probe(struct platform_device *pdev) +{ + struct cr_panel *crp; + u8 dev_en; + + crp = kzalloc(sizeof(crp), GFP_KERNEL); + if (crp == NULL) + return -ENOMEM; + + lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL, + CRVML_DEVICE_LPC, NULL); + if (!lpc_dev) { + printk("INTEL CARILLO RANCH LPC not found.\n"); + return -ENODEV; + } + + pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en); + if (!(dev_en & CRVML_GPIOEN_BIT)) { + printk(KERN_ERR + "Carillo Ranch GPIO device was not enabled.\n"); + pci_dev_put(lpc_dev); + return -ENODEV; + } + + crp->cr_backlight_device = backlight_device_register("cr-backlight", + &pdev->dev, NULL, + &cr_backlight_ops); + if (IS_ERR(crp->cr_backlight_device)) { + pci_dev_put(lpc_dev); + return PTR_ERR(crp->cr_backlight_device); + } + + crp->cr_lcd_device = lcd_device_register("cr-lcd", + &pdev->dev, + &cr_lcd_ops); + + if (IS_ERR(crp->cr_lcd_device)) { + pci_dev_put(lpc_dev); + return PTR_ERR(crp->cr_backlight_device); + } + + pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR, + &gpio_bar); + gpio_bar &= ~0x3F; + + crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK; + crp->cr_backlight_device->props.brightness = 0; + crp->cr_backlight_device->props.max_brightness = 0; + cr_backlight_set_intensity(crp->cr_backlight_device); + + cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK); + + platform_set_drvdata(pdev, crp); + + return 0; +} + +static int cr_backlight_remove(struct platform_device *pdev) +{ + struct cr_panel *crp = platform_get_drvdata(pdev); + crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN; + crp->cr_backlight_device->props.brightness = 0; + crp->cr_backlight_device->props.max_brightness = 0; + cr_backlight_set_intensity(crp->cr_backlight_device); + cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN); + backlight_device_unregister(crp->cr_backlight_device); + lcd_device_unregister(crp->cr_lcd_device); + pci_dev_put(lpc_dev); + + return 0; +} + +static struct platform_driver cr_backlight_driver = { + .probe = cr_backlight_probe, + .remove = cr_backlight_remove, + .driver = { + .name = "cr_backlight", + }, +}; + +static struct platform_device *crp; + +static int __init cr_backlight_init(void) +{ + int ret = platform_driver_register(&cr_backlight_driver); + + if (!ret) { + crp = platform_device_alloc("cr_backlight", -1); + if (!crp) + return -ENOMEM; + + ret = platform_device_add(crp); + + if (ret) { + platform_device_put(crp); + platform_driver_unregister(&cr_backlight_driver); + } + } + + printk("Carillo Ranch Backlight Driver Initialized.\n"); + + return ret; +} + +static void __exit cr_backlight_exit(void) +{ + platform_device_unregister(crp); + platform_driver_unregister(&cr_backlight_driver); +} + +module_init(cr_backlight_init); +module_exit(cr_backlight_exit); + +MODULE_AUTHOR("Tungsten Graphics Inc."); +MODULE_DESCRIPTION("Carillo Ranch Backlight Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/cfbcopyarea.c b/drivers/video/cfbcopyarea.c index 6faea4034e3d..032210f45be3 100644 --- a/drivers/video/cfbcopyarea.c +++ b/drivers/video/cfbcopyarea.c @@ -22,8 +22,6 @@ * help moving some redundant computations and branches out of the loop, too. */ - - #include <linux/module.h> #include <linux/kernel.h> #include <linux/string.h> @@ -31,6 +29,7 @@ #include <linux/slab.h> #include <asm/types.h> #include <asm/io.h> +#include "fb_draw.h" #if BITS_PER_LONG == 32 # define FB_WRITEL fb_writel @@ -41,17 +40,6 @@ #endif /* - * Compose two values, using a bitmask as decision value - * This is equivalent to (a & mask) | (b & ~mask) - */ - -static inline unsigned long -comp(unsigned long a, unsigned long b, unsigned long mask) -{ - return ((a ^ b) & mask) ^ b; -} - - /* * Generic bitwise copy algorithm */ diff --git a/drivers/video/cfbfillrect.c b/drivers/video/cfbfillrect.c index f00b50aab606..71623b4f8ca2 100644 --- a/drivers/video/cfbfillrect.c +++ b/drivers/video/cfbfillrect.c @@ -21,6 +21,7 @@ #include <linux/string.h> #include <linux/fb.h> #include <asm/types.h> +#include "fb_draw.h" #if BITS_PER_LONG == 32 # define FB_WRITEL fb_writel @@ -31,73 +32,6 @@ #endif /* - * Compose two values, using a bitmask as decision value - * This is equivalent to (a & mask) | (b & ~mask) - */ - -static inline unsigned long -comp(unsigned long a, unsigned long b, unsigned long mask) -{ - return ((a ^ b) & mask) ^ b; -} - - /* - * Create a pattern with the given pixel's color - */ - -#if BITS_PER_LONG == 64 -static inline unsigned long -pixel_to_pat( u32 bpp, u32 pixel) -{ - switch (bpp) { - case 1: - return 0xfffffffffffffffful*pixel; - case 2: - return 0x5555555555555555ul*pixel; - case 4: - return 0x1111111111111111ul*pixel; - case 8: - return 0x0101010101010101ul*pixel; - case 12: - return 0x0001001001001001ul*pixel; - case 16: - return 0x0001000100010001ul*pixel; - case 24: - return 0x0000000001000001ul*pixel; - case 32: - return 0x0000000100000001ul*pixel; - default: - panic("pixel_to_pat(): unsupported pixelformat\n"); - } -} -#else -static inline unsigned long -pixel_to_pat( u32 bpp, u32 pixel) -{ - switch (bpp) { - case 1: - return 0xfffffffful*pixel; - case 2: - return 0x55555555ul*pixel; - case 4: - return 0x11111111ul*pixel; - case 8: - return 0x01010101ul*pixel; - case 12: - return 0x00001001ul*pixel; - case 16: - return 0x00010001ul*pixel; - case 24: - return 0x00000001ul*pixel; - case 32: - return 0x00000001ul*pixel; - default: - panic("pixel_to_pat(): unsupported pixelformat\n"); - } -} -#endif - - /* * Aligned pattern fill using 32/64-bit memory accesses */ diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 2c4bc6205738..8269d704ab2a 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -98,15 +98,6 @@ #define assert(expr) #endif -#ifdef TRUE -#undef TRUE -#endif -#ifdef FALSE -#undef FALSE -#endif -#define TRUE 1 -#define FALSE 0 - #define MB_ (1024*1024) #define KB_ (1024) @@ -146,9 +137,9 @@ static const struct cirrusfb_board_info_rec { char *name; /* ASCII name of chipset */ long maxclock[5]; /* maximum video clock */ /* for 1/4bpp, 8bpp 15/16bpp, 24bpp, 32bpp - numbers from xorg code */ - unsigned init_sr07 : 1; /* init SR07 during init_vgachip() */ - unsigned init_sr1f : 1; /* write SR1F during init_vgachip() */ - unsigned scrn_start_bit19 : 1; /* construct bit 19 of screen start address */ + bool init_sr07 : 1; /* init SR07 during init_vgachip() */ + bool init_sr1f : 1; /* write SR1F during init_vgachip() */ + bool scrn_start_bit19 : 1; /* construct bit 19 of screen start address */ /* initial SR07 value, then for each mode */ unsigned char sr07; @@ -166,9 +157,9 @@ static const struct cirrusfb_board_info_rec { /* the SD64/P4 have a higher max. videoclock */ 140000, 140000, 140000, 140000, 140000, }, - .init_sr07 = TRUE, - .init_sr1f = TRUE, - .scrn_start_bit19 = TRUE, + .init_sr07 = true, + .init_sr1f = true, + .scrn_start_bit19 = true, .sr07 = 0xF0, .sr07_1bpp = 0xF0, .sr07_8bpp = 0xF1, @@ -180,9 +171,9 @@ static const struct cirrusfb_board_info_rec { /* guess */ 90000, 90000, 90000, 90000, 90000 }, - .init_sr07 = TRUE, - .init_sr1f = TRUE, - .scrn_start_bit19 = FALSE, + .init_sr07 = true, + .init_sr1f = true, + .scrn_start_bit19 = false, .sr07 = 0x80, .sr07_1bpp = 0x80, .sr07_8bpp = 0x81, @@ -194,9 +185,9 @@ static const struct cirrusfb_board_info_rec { /* guess */ 90000, 90000, 90000, 90000, 90000 }, - .init_sr07 = TRUE, - .init_sr1f = TRUE, - .scrn_start_bit19 = FALSE, + .init_sr07 = true, + .init_sr1f = true, + .scrn_start_bit19 = false, .sr07 = 0x20, .sr07_1bpp = 0x20, .sr07_8bpp = 0x21, @@ -208,9 +199,9 @@ static const struct cirrusfb_board_info_rec { /* guess */ 90000, 90000, 90000, 90000, 90000 }, - .init_sr07 = TRUE, - .init_sr1f = TRUE, - .scrn_start_bit19 = FALSE, + .init_sr07 = true, + .init_sr1f = true, + .scrn_start_bit19 = false, .sr07 = 0x80, .sr07_1bpp = 0x80, .sr07_8bpp = 0x81, @@ -221,9 +212,9 @@ static const struct cirrusfb_board_info_rec { .maxclock = { 135100, 135100, 85500, 85500, 0 }, - .init_sr07 = TRUE, - .init_sr1f = FALSE, - .scrn_start_bit19 = TRUE, + .init_sr07 = true, + .init_sr1f = false, + .scrn_start_bit19 = true, .sr07 = 0x20, .sr07_1bpp = 0x20, .sr07_8bpp = 0x21, @@ -235,9 +226,9 @@ static const struct cirrusfb_board_info_rec { /* for the GD5430. GD5446 can do more... */ 85500, 85500, 50000, 28500, 0 }, - .init_sr07 = TRUE, - .init_sr1f = TRUE, - .scrn_start_bit19 = TRUE, + .init_sr07 = true, + .init_sr1f = true, + .scrn_start_bit19 = true, .sr07 = 0xA0, .sr07_1bpp = 0xA1, .sr07_1bpp_mux = 0xA7, @@ -250,9 +241,9 @@ static const struct cirrusfb_board_info_rec { .maxclock = { 135100, 200000, 200000, 135100, 135100 }, - .init_sr07 = TRUE, - .init_sr1f = TRUE, - .scrn_start_bit19 = TRUE, + .init_sr07 = true, + .init_sr1f = true, + .scrn_start_bit19 = true, .sr07 = 0x10, .sr07_1bpp = 0x11, .sr07_8bpp = 0x11, @@ -264,9 +255,9 @@ static const struct cirrusfb_board_info_rec { /* guess */ 135100, 135100, 135100, 135100, 135100, }, - .init_sr07 = FALSE, - .init_sr1f = FALSE, - .scrn_start_bit19 = TRUE, + .init_sr07 = false, + .init_sr1f = false, + .scrn_start_bit19 = true, } }; @@ -815,7 +806,7 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var, default: DPRINTK("Unsupported bpp size: %d\n", var->bits_per_pixel); - assert (FALSE); + assert(false); /* should never occur */ break; } @@ -886,7 +877,7 @@ static int cirrusfb_decode_var (const struct fb_var_screeninfo *var, default: DPRINTK("Unsupported bpp size: %d\n", var->bits_per_pixel); - assert (FALSE); + assert(false); /* should never occur */ break; } @@ -3203,7 +3194,7 @@ void cirrusfb_dbg_print_regs (caddr_t regbase, cirrusfb_dbg_reg_class_t reg_clas break; default: /* should never occur */ - assert (FALSE); + assert(false); break; } diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 0429fd2cece0..73813c60d03a 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -107,7 +107,9 @@ static struct display fb_display[MAX_NR_CONSOLES]; static signed char con2fb_map[MAX_NR_CONSOLES]; static signed char con2fb_map_boot[MAX_NR_CONSOLES]; +#ifndef MODULE static int logo_height; +#endif static int logo_lines; /* logo_shown is an index to vc_cons when >= 0; otherwise follows FBCON_LOGO enums. */ @@ -576,6 +578,13 @@ static int fbcon_takeover(int show_logo) return err; } +#ifdef MODULE +static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info, + int cols, int rows, int new_cols, int new_rows) +{ + logo_shown = FBCON_LOGO_DONTSHOW; +} +#else static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info, int cols, int rows, int new_cols, int new_rows) { @@ -584,6 +593,11 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info, int cnt, erase = vc->vc_video_erase_char, step; unsigned short *save = NULL, *r, *q; + if (info->flags & FBINFO_MODULE) { + logo_shown = FBCON_LOGO_DONTSHOW; + return; + } + /* * remove underline attribute from erase character * if black and white framebuffer. @@ -618,8 +632,13 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info, r -= cols; } if (!save) { - vc->vc_y += logo_lines; - vc->vc_pos += logo_lines * vc->vc_size_row; + int lines; + if (vc->vc_y + logo_lines >= rows) + lines = rows - vc->vc_y - 1; + else + lines = logo_lines; + vc->vc_y += lines; + vc->vc_pos += lines * vc->vc_size_row; } } scr_memsetw((unsigned short *) vc->vc_origin, @@ -650,6 +669,7 @@ static void fbcon_prepare_logo(struct vc_data *vc, struct fb_info *info, vc->vc_top = logo_lines; } } +#endif /* MODULE */ #ifdef CONFIG_FB_TILEBLITTING static void set_blitting_type(struct vc_data *vc, struct fb_info *info) @@ -665,6 +685,17 @@ static void set_blitting_type(struct vc_data *vc, struct fb_info *info) fbcon_set_bitops(ops); } } + +static int fbcon_invalid_charcount(struct fb_info *info, unsigned charcount) +{ + int err = 0; + + if (info->flags & FBINFO_MISC_TILEBLITTING && + info->tileops->fb_get_tilemax(info) < charcount) + err = 1; + + return err; +} #else static void set_blitting_type(struct vc_data *vc, struct fb_info *info) { @@ -675,6 +706,12 @@ static void set_blitting_type(struct vc_data *vc, struct fb_info *info) fbcon_set_rotation(info); fbcon_set_bitops(ops); } + +static int fbcon_invalid_charcount(struct fb_info *info, unsigned charcount) +{ + return 0; +} + #endif /* CONFIG_MISC_TILEBLITTING */ @@ -968,7 +1005,9 @@ static const char *fbcon_startup(void) if (!p->fontdata) { if (!fontname[0] || !(font = find_font(fontname))) font = get_default_font(info->var.xres, - info->var.yres); + info->var.yres, + info->pixmap.blit_x, + info->pixmap.blit_y); vc->vc_font.width = font->width; vc->vc_font.height = font->height; vc->vc_font.data = (void *)(p->fontdata = font->data); @@ -1088,7 +1127,9 @@ static void fbcon_init(struct vc_data *vc, int init) if (!fontname[0] || !(font = find_font(fontname))) font = get_default_font(info->var.xres, - info->var.yres); + info->var.yres, + info->pixmap.blit_x, + info->pixmap.blit_y); vc->vc_font.width = font->width; vc->vc_font.height = font->height; vc->vc_font.data = (void *)(p->fontdata = font->data); @@ -1305,7 +1346,7 @@ static void fbcon_cursor(struct vc_data *vc, int mode) int y; int c = scr_readw((u16 *) vc->vc_pos); - if (fbcon_is_inactive(vc, info)) + if (fbcon_is_inactive(vc, info) || vc->vc_deccm != 1) return; ops->cursor_flash = (mode == CM_ERASE) ? 0 : 1; @@ -2475,6 +2516,7 @@ static int fbcon_copy_font(struct vc_data *vc, int con) static int fbcon_set_font(struct vc_data *vc, struct console_font *font, unsigned flags) { + struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]]; unsigned charcount = font->charcount; int w = font->width; int h = font->height; @@ -2488,6 +2530,15 @@ static int fbcon_set_font(struct vc_data *vc, struct console_font *font, unsigne if (charcount != 256 && charcount != 512) return -EINVAL; + /* Make sure drawing engine can handle the font */ + if (!(info->pixmap.blit_x & (1 << (font->width - 1))) || + !(info->pixmap.blit_y & (1 << (font->height - 1)))) + return -EINVAL; + + /* Make sure driver can handle the font length */ + if (fbcon_invalid_charcount(info, charcount)) + return -EINVAL; + size = h * pitch * charcount; new_data = kmalloc(FONT_EXTRA_WORDS * sizeof(int) + size, GFP_USER); @@ -2532,7 +2583,8 @@ static int fbcon_set_def_font(struct vc_data *vc, struct console_font *font, cha const struct font_desc *f; if (!name) - f = get_default_font(info->var.xres, info->var.yres); + f = get_default_font(info->var.xres, info->var.yres, + info->pixmap.blit_x, info->pixmap.blit_y); else if (!(f = find_font(name))) return -ENOENT; @@ -2829,7 +2881,7 @@ static void fbcon_set_all_vcs(struct fb_info *info) struct fbcon_ops *ops = info->fbcon_par; struct vc_data *vc; struct display *p; - int i, rows, cols; + int i, rows, cols, fg = -1; if (!ops || ops->currcon < 0) return; @@ -2840,34 +2892,23 @@ static void fbcon_set_all_vcs(struct fb_info *info) registered_fb[con2fb_map[i]] != info) continue; + if (CON_IS_VISIBLE(vc)) { + fg = i; + continue; + } + p = &fb_display[vc->vc_num]; set_blitting_type(vc, info); var_to_display(p, &info->var, info); - cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres); - rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres); + cols = FBCON_SWAP(p->rotate, info->var.xres, info->var.yres); + rows = FBCON_SWAP(p->rotate, info->var.yres, info->var.xres); cols /= vc->vc_font.width; rows /= vc->vc_font.height; vc_resize(vc, cols, rows); - - if (CON_IS_VISIBLE(vc)) { - updatescrollmode(p, info, vc); - scrollback_max = 0; - scrollback_current = 0; - - if (!fbcon_is_inactive(vc, info)) { - ops->var.xoffset = ops->var.yoffset = - p->yscroll = 0; - ops->update_start(info); - } - - fbcon_set_palette(vc, color_table); - update_screen(vc); - if (softback_buf) - fbcon_update_softback(vc); - } } - ops->p = &fb_display[ops->currcon]; + if (fg != -1) + fbcon_modechanged(info); } static int fbcon_mode_deleted(struct fb_info *info, @@ -3002,6 +3043,42 @@ static void fbcon_new_modelist(struct fb_info *info) } } +static void fbcon_get_requirement(struct fb_info *info, + struct fb_blit_caps *caps) +{ + struct vc_data *vc; + struct display *p; + + if (caps->flags) { + int i, charcnt; + + for (i = first_fb_vc; i <= last_fb_vc; i++) { + vc = vc_cons[i].d; + if (vc && vc->vc_mode == KD_TEXT && + info->node == con2fb_map[i]) { + p = &fb_display[i]; + caps->x |= 1 << (vc->vc_font.width - 1); + caps->y |= 1 << (vc->vc_font.height - 1); + charcnt = (p->userfont) ? + FNTCHARCNT(p->fontdata) : 256; + if (caps->len < charcnt) + caps->len = charcnt; + } + } + } else { + vc = vc_cons[fg_console].d; + + if (vc && vc->vc_mode == KD_TEXT && + info->node == con2fb_map[fg_console]) { + p = &fb_display[fg_console]; + caps->x = 1 << (vc->vc_font.width - 1); + caps->y = 1 << (vc->vc_font.height - 1); + caps->len = (p->userfont) ? + FNTCHARCNT(p->fontdata) : 256; + } + } +} + static int fbcon_event_notify(struct notifier_block *self, unsigned long action, void *data) { @@ -3009,6 +3086,7 @@ static int fbcon_event_notify(struct notifier_block *self, struct fb_info *info = event->info; struct fb_videomode *mode; struct fb_con2fbmap *con2fb; + struct fb_blit_caps *caps; int ret = 0; /* @@ -3057,6 +3135,10 @@ static int fbcon_event_notify(struct notifier_block *self, case FB_EVENT_NEW_MODELIST: fbcon_new_modelist(info); break; + case FB_EVENT_GET_REQ: + caps = event->data; + fbcon_get_requirement(info, caps); + break; } done: diff --git a/drivers/video/console/fonts.c b/drivers/video/console/fonts.c index c960728b7e82..a6828d0a4c56 100644 --- a/drivers/video/console/fonts.c +++ b/drivers/video/console/fonts.c @@ -98,6 +98,8 @@ const struct font_desc *find_font(const char *name) * get_default_font - get default font * @xres: screen size of X * @yres: screen size of Y + * @font_w: bit array of supported widths (1 - 32) + * @font_h: bit array of supported heights (1 - 32) * * Get the default font for a specified screen size. * Dimensions are in pixels. @@ -107,7 +109,8 @@ const struct font_desc *find_font(const char *name) * */ -const struct font_desc *get_default_font(int xres, int yres) +const struct font_desc *get_default_font(int xres, int yres, u32 font_w, + u32 font_h) { int i, c, cc; const struct font_desc *f, *g; @@ -129,6 +132,11 @@ const struct font_desc *get_default_font(int xres, int yres) #endif if ((yres < 400) == (f->height <= 8)) c += 1000; + + if (!(font_w & (1 << (f->width - 1))) || + !(font_w & (1 << (f->height - 1)))) + c += 1000; + if (c > cc) { cc = c; g = f; diff --git a/drivers/video/console/mdacon.c b/drivers/video/console/mdacon.c index 124ecbe6f88c..bd8d995fe25d 100644 --- a/drivers/video/console/mdacon.c +++ b/drivers/video/console/mdacon.c @@ -384,7 +384,7 @@ static inline u16 mda_convert_attr(u16 ch) } static u8 mdacon_build_attr(struct vc_data *c, u8 color, u8 intensity, - u8 blink, u8 underline, u8 reverse) + u8 blink, u8 underline, u8 reverse, u8 italic) { /* The attribute is just a bit vector: * @@ -397,6 +397,7 @@ static u8 mdacon_build_attr(struct vc_data *c, u8 color, u8 intensity, return (intensity & 3) | ((underline & 1) << 2) | ((reverse & 1) << 3) | + (!!italic << 4) | ((blink & 1) << 7); } diff --git a/drivers/video/console/promcon.c b/drivers/video/console/promcon.c index b78eac63459f..ae02e4eb18e7 100644 --- a/drivers/video/console/promcon.c +++ b/drivers/video/console/promcon.c @@ -548,7 +548,8 @@ promcon_scroll(struct vc_data *conp, int t, int b, int dir, int count) } #if !(PROMCON_COLOR) -static u8 promcon_build_attr(struct vc_data *conp, u8 _color, u8 _intensity, u8 _blink, u8 _underline, u8 _reverse) +static u8 promcon_build_attr(struct vc_data *conp, u8 _color, u8 _intensity, + u8 _blink, u8 _underline, u8 _reverse, u8 _italic) { return (_reverse) ? 0xf : 0x7; } diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c index 57b21e533036..67a682d6cc7b 100644 --- a/drivers/video/console/sticon.c +++ b/drivers/video/console/sticon.c @@ -314,7 +314,7 @@ static unsigned long sticon_getxy(struct vc_data *conp, unsigned long pos, } static u8 sticon_build_attr(struct vc_data *conp, u8 color, u8 intens, - u8 blink, u8 underline, u8 reverse) + u8 blink, u8 underline, u8 reverse, u8 italic) { u8 attr = ((color & 0x70) >> 1) | ((color & 7)); diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index 88e7038eab88..717b360d0415 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -495,7 +495,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name) return NULL; fbfont = find_font(fbfont_name); if (!fbfont) - fbfont = get_default_font(1024,768); + fbfont = get_default_font(1024,768, ~(u32)0, ~(u32)0); if (!fbfont) return NULL; diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 3e67c34df9a5..2460b82a1d93 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -86,8 +86,6 @@ static int vgacon_set_origin(struct vc_data *c); static void vgacon_save_screen(struct vc_data *c); static int vgacon_scroll(struct vc_data *c, int t, int b, int dir, int lines); -static u8 vgacon_build_attr(struct vc_data *c, u8 color, u8 intensity, - u8 blink, u8 underline, u8 reverse); static void vgacon_invert_region(struct vc_data *c, u16 * p, int count); static unsigned long vgacon_uni_pagedir[2]; @@ -578,12 +576,14 @@ static void vgacon_deinit(struct vc_data *c) } static u8 vgacon_build_attr(struct vc_data *c, u8 color, u8 intensity, - u8 blink, u8 underline, u8 reverse) + u8 blink, u8 underline, u8 reverse, u8 italic) { u8 attr = color; if (vga_can_do_color) { - if (underline) + if (italic) + attr = (attr & 0xF0) | c->vc_itcolor; + else if (underline) attr = (attr & 0xf0) | c->vc_ulcolor; else if (intensity == 0) attr = (attr & 0xf0) | c->vc_halfcolor; @@ -597,7 +597,9 @@ static u8 vgacon_build_attr(struct vc_data *c, u8 color, u8 intensity, if (intensity == 2) attr ^= 0x08; if (!vga_can_do_color) { - if (underline) + if (italic) + attr = (attr & 0xF8) | 0x02; + else if (underline) attr = (attr & 0xf8) | 0x01; else if (intensity == 0) attr = (attr & 0xf0) | 0x08; @@ -658,6 +660,9 @@ static void vgacon_set_cursor_size(int xpos, int from, int to) static void vgacon_cursor(struct vc_data *c, int mode) { + if (c->vc_mode != KD_TEXT) + return; + vgacon_restore_screen(c); switch (mode) { @@ -1316,7 +1321,7 @@ static int vgacon_scroll(struct vc_data *c, int t, int b, int dir, unsigned long oldo; unsigned int delta; - if (t || b != c->vc_rows || vga_is_gfx) + if (t || b != c->vc_rows || vga_is_gfx || c->vc_mode != KD_TEXT) return 0; if (!vga_hardscroll_enabled || lines >= c->vc_rows / 2) diff --git a/drivers/video/display/Kconfig b/drivers/video/display/Kconfig new file mode 100644 index 000000000000..f99af931d4f8 --- /dev/null +++ b/drivers/video/display/Kconfig @@ -0,0 +1,24 @@ +# +# Display drivers configuration +# + +menu "Display device support" + +config DISPLAY_SUPPORT + tristate "Display panel/monitor support" + ---help--- + This framework adds support for low-level control of a display. + This includes support for power. + + Enable this to be able to choose the drivers for controlling the + physical display panel/monitor on some platforms. This not only + covers LCD displays for PDAs but also other types of displays + such as CRT, TVout etc. + + To have support for your specific display panel you will have to + select the proper drivers which depend on this option. + +comment "Display hardware drivers" + depends on DISPLAY_SUPPORT + +endmenu diff --git a/drivers/video/display/Makefile b/drivers/video/display/Makefile new file mode 100644 index 000000000000..c0ea832bf171 --- /dev/null +++ b/drivers/video/display/Makefile @@ -0,0 +1,6 @@ +# Display drivers + +display-objs := display-sysfs.o + +obj-$(CONFIG_DISPLAY_SUPPORT) += display.o + diff --git a/drivers/video/display/display-sysfs.c b/drivers/video/display/display-sysfs.c new file mode 100644 index 000000000000..35477177bef4 --- /dev/null +++ b/drivers/video/display/display-sysfs.c @@ -0,0 +1,217 @@ +/* + * display-sysfs.c - Display output driver sysfs interface + * + * Copyright (C) 2007 James Simmons <jsimmons@infradead.org> + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#include <linux/module.h> +#include <linux/display.h> +#include <linux/ctype.h> +#include <linux/idr.h> +#include <linux/err.h> + +static ssize_t display_show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct display_device *dsp = dev_get_drvdata(dev); + return snprintf(buf, PAGE_SIZE, "%s\n", dsp->name); +} + +static ssize_t display_show_type(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct display_device *dsp = dev_get_drvdata(dev); + return snprintf(buf, PAGE_SIZE, "%s\n", dsp->type); +} + +static ssize_t display_show_contrast(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct display_device *dsp = dev_get_drvdata(dev); + ssize_t rc = -ENXIO; + + mutex_lock(&dsp->lock); + if (likely(dsp->driver) && dsp->driver->get_contrast) + rc = sprintf(buf, "%d\n", dsp->driver->get_contrast(dsp)); + mutex_unlock(&dsp->lock); + return rc; +} + +static ssize_t display_store_contrast(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct display_device *dsp = dev_get_drvdata(dev); + ssize_t ret = -EINVAL, size; + int contrast; + char *endp; + + contrast = simple_strtoul(buf, &endp, 0); + size = endp - buf; + + if (*endp && isspace(*endp)) + size++; + + if (size != count) + return ret; + + mutex_lock(&dsp->lock); + if (likely(dsp->driver && dsp->driver->set_contrast)) { + pr_debug("display: set contrast to %d\n", contrast); + dsp->driver->set_contrast(dsp, contrast); + ret = count; + } + mutex_unlock(&dsp->lock); + return ret; +} + +static ssize_t display_show_max_contrast(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct display_device *dsp = dev_get_drvdata(dev); + ssize_t rc = -ENXIO; + + mutex_lock(&dsp->lock); + if (likely(dsp->driver)) + rc = sprintf(buf, "%d\n", dsp->driver->max_contrast); + mutex_unlock(&dsp->lock); + return rc; +} + +static struct device_attribute display_attrs[] = { + __ATTR(name, S_IRUGO, display_show_name, NULL), + __ATTR(type, S_IRUGO, display_show_type, NULL), + __ATTR(contrast, S_IRUGO | S_IWUSR, display_show_contrast, display_store_contrast), + __ATTR(max_contrast, S_IRUGO, display_show_max_contrast, NULL), +}; + +static int display_suspend(struct device *dev, pm_message_t state) +{ + struct display_device *dsp = dev_get_drvdata(dev); + + mutex_lock(&dsp->lock); + if (likely(dsp->driver->suspend)) + dsp->driver->suspend(dsp, state); + mutex_unlock(&dsp->lock); + return 0; +}; + +static int display_resume(struct device *dev) +{ + struct display_device *dsp = dev_get_drvdata(dev); + + mutex_lock(&dsp->lock); + if (likely(dsp->driver->resume)) + dsp->driver->resume(dsp); + mutex_unlock(&dsp->lock); + return 0; +}; + +static struct mutex allocated_dsp_lock; +static DEFINE_IDR(allocated_dsp); +static struct class *display_class; + +struct display_device *display_device_register(struct display_driver *driver, + struct device *parent, void *devdata) +{ + struct display_device *new_dev = NULL; + int ret = -EINVAL; + + if (unlikely(!driver)) + return ERR_PTR(ret); + + mutex_lock(&allocated_dsp_lock); + ret = idr_pre_get(&allocated_dsp, GFP_KERNEL); + mutex_unlock(&allocated_dsp_lock); + if (!ret) + return ERR_PTR(ret); + + new_dev = kzalloc(sizeof(struct display_device), GFP_KERNEL); + if (likely(new_dev) && unlikely(driver->probe(new_dev, devdata))) { + // Reserve the index for this display + mutex_lock(&allocated_dsp_lock); + ret = idr_get_new(&allocated_dsp, new_dev, &new_dev->idx); + mutex_unlock(&allocated_dsp_lock); + + if (!ret) { + new_dev->dev = device_create(display_class, parent, 0, + "display%d", new_dev->idx); + if (!IS_ERR(new_dev->dev)) { + dev_set_drvdata(new_dev->dev, new_dev); + new_dev->parent = parent; + new_dev->driver = driver; + mutex_init(&new_dev->lock); + return new_dev; + } + mutex_lock(&allocated_dsp_lock); + idr_remove(&allocated_dsp, new_dev->idx); + mutex_unlock(&allocated_dsp_lock); + ret = -EINVAL; + } + } + kfree(new_dev); + return ERR_PTR(ret); +} +EXPORT_SYMBOL(display_device_register); + +void display_device_unregister(struct display_device *ddev) +{ + if (!ddev) + return; + // Free device + mutex_lock(&ddev->lock); + device_unregister(ddev->dev); + mutex_unlock(&ddev->lock); + // Mark device index as avaliable + mutex_lock(&allocated_dsp_lock); + idr_remove(&allocated_dsp, ddev->idx); + mutex_unlock(&allocated_dsp_lock); + kfree(ddev); +} +EXPORT_SYMBOL(display_device_unregister); + +static int __init display_class_init(void) +{ + display_class = class_create(THIS_MODULE, "display"); + if (IS_ERR(display_class)) { + printk(KERN_ERR "Failed to create display class\n"); + display_class = NULL; + return -EINVAL; + } + display_class->dev_attrs = display_attrs; + display_class->suspend = display_suspend; + display_class->resume = display_resume; + mutex_init(&allocated_dsp_lock); + return 0; +} + +static void __exit display_class_exit(void) +{ + class_destroy(display_class); +} + +module_init(display_class_init); +module_exit(display_class_exit); + +MODULE_DESCRIPTION("Display Hardware handling"); +MODULE_AUTHOR("James Simmons <jsimmons@infradead.org>"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c index 29e07c109887..ca2c54ce508e 100644 --- a/drivers/video/epson1355fb.c +++ b/drivers/video/epson1355fb.c @@ -403,17 +403,10 @@ static inline unsigned long copy_to_user16(void *to, const void *from, static ssize_t -epson1355fb_read(struct file *file, char *buf, size_t count, loff_t * ppos) +epson1355fb_read(struct fb_info *info, char *buf, size_t count, loff_t * ppos) { - struct inode *inode = file->f_path.dentry->d_inode; - int fbidx = iminor(inode); - struct fb_info *info = registered_fb[fbidx]; unsigned long p = *ppos; - /* from fbmem.c except for our own copy_*_user */ - if (!info || !info->screen_base) - return -ENODEV; - if (p >= info->fix.smem_len) return 0; if (count >= info->fix.smem_len) @@ -434,20 +427,13 @@ epson1355fb_read(struct file *file, char *buf, size_t count, loff_t * ppos) } static ssize_t -epson1355fb_write(struct file *file, const char *buf, +epson1355fb_write(struct fb_info *info, const char *buf, size_t count, loff_t * ppos) { - struct inode *inode = file->f_path.dentry->d_inode; - int fbidx = iminor(inode); - struct fb_info *info = registered_fb[fbidx]; unsigned long p = *ppos; int err; /* from fbmem.c except for our own copy_*_user */ - if (!info || !info->screen_base) - return -ENODEV; - - /* from fbmem.c except for our own copy_*_user */ if (p > info->fix.smem_len) return -ENOSPC; if (count >= info->fix.smem_len) @@ -650,9 +636,10 @@ int __init epson1355fb_probe(struct platform_device *dev) } info = framebuffer_alloc(sizeof(struct epson1355_par) + sizeof(u32) * 256, &dev->dev); - if (!info) + if (!info) { rc = -ENOMEM; goto bail; + } default_par = info->par; default_par->reg_addr = (unsigned long) ioremap(EPSON1355FB_REGS_PHYS, EPSON1355FB_REGS_LEN); diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c new file mode 100644 index 000000000000..1a8643f053d8 --- /dev/null +++ b/drivers/video/fb_defio.c @@ -0,0 +1,151 @@ +/* + * linux/drivers/video/fb_defio.c + * + * Copyright (C) 2006 Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/list.h> +#include <asm/uaccess.h> + +/* to support deferred IO */ +#include <linux/rmap.h> +#include <linux/pagemap.h> + +/* this is to find and return the vmalloc-ed fb pages */ +static struct page* fb_deferred_io_nopage(struct vm_area_struct *vma, + unsigned long vaddr, int *type) +{ + unsigned long offset; + struct page *page; + struct fb_info *info = vma->vm_private_data; + /* info->screen_base is in System RAM */ + void *screen_base = (void __force *) info->screen_base; + + offset = (vaddr - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT); + if (offset >= info->fix.smem_len) + return NOPAGE_SIGBUS; + + page = vmalloc_to_page(screen_base + offset); + if (!page) + return NOPAGE_OOM; + + get_page(page); + if (type) + *type = VM_FAULT_MINOR; + return page; +} + +int fb_deferred_io_fsync(struct file *file, struct dentry *dentry, int datasync) +{ + struct fb_info *info = file->private_data; + + /* Kill off the delayed work */ + cancel_rearming_delayed_work(&info->deferred_work); + + /* Run it immediately */ + return schedule_delayed_work(&info->deferred_work, 0); +} +EXPORT_SYMBOL_GPL(fb_deferred_io_fsync); + +/* vm_ops->page_mkwrite handler */ +static int fb_deferred_io_mkwrite(struct vm_area_struct *vma, + struct page *page) +{ + struct fb_info *info = vma->vm_private_data; + struct fb_deferred_io *fbdefio = info->fbdefio; + + /* this is a callback we get when userspace first tries to + write to the page. we schedule a workqueue. that workqueue + will eventually mkclean the touched pages and execute the + deferred framebuffer IO. then if userspace touches a page + again, we repeat the same scheme */ + + /* protect against the workqueue changing the page list */ + mutex_lock(&fbdefio->lock); + list_add(&page->lru, &fbdefio->pagelist); + mutex_unlock(&fbdefio->lock); + + /* come back after delay to process the deferred IO */ + schedule_delayed_work(&info->deferred_work, fbdefio->delay); + return 0; +} + +static struct vm_operations_struct fb_deferred_io_vm_ops = { + .nopage = fb_deferred_io_nopage, + .page_mkwrite = fb_deferred_io_mkwrite, +}; + +static int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + vma->vm_ops = &fb_deferred_io_vm_ops; + vma->vm_flags |= ( VM_IO | VM_RESERVED | VM_DONTEXPAND ); + vma->vm_private_data = info; + return 0; +} + +/* workqueue callback */ +static void fb_deferred_io_work(struct work_struct *work) +{ + struct fb_info *info = container_of(work, struct fb_info, + deferred_work.work); + struct list_head *node, *next; + struct page *cur; + struct fb_deferred_io *fbdefio = info->fbdefio; + + /* here we mkclean the pages, then do all deferred IO */ + mutex_lock(&fbdefio->lock); + list_for_each_entry(cur, &fbdefio->pagelist, lru) { + lock_page(cur); + page_mkclean(cur); + unlock_page(cur); + } + + /* driver's callback with pagelist */ + fbdefio->deferred_io(info, &fbdefio->pagelist); + + /* clear the list */ + list_for_each_safe(node, next, &fbdefio->pagelist) { + list_del(node); + } + mutex_unlock(&fbdefio->lock); +} + +void fb_deferred_io_init(struct fb_info *info) +{ + struct fb_deferred_io *fbdefio = info->fbdefio; + + BUG_ON(!fbdefio); + mutex_init(&fbdefio->lock); + info->fbops->fb_mmap = fb_deferred_io_mmap; + INIT_DELAYED_WORK(&info->deferred_work, fb_deferred_io_work); + INIT_LIST_HEAD(&fbdefio->pagelist); + if (fbdefio->delay == 0) /* set a default of 1 s */ + fbdefio->delay = HZ; +} +EXPORT_SYMBOL_GPL(fb_deferred_io_init); + +void fb_deferred_io_cleanup(struct fb_info *info) +{ + struct fb_deferred_io *fbdefio = info->fbdefio; + + BUG_ON(!fbdefio); + cancel_delayed_work(&info->deferred_work); + flush_scheduled_work(); +} +EXPORT_SYMBOL_GPL(fb_deferred_io_cleanup); + +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fb_draw.h b/drivers/video/fb_draw.h new file mode 100644 index 000000000000..c5c45203833b --- /dev/null +++ b/drivers/video/fb_draw.h @@ -0,0 +1,72 @@ +#ifndef _FB_DRAW_H +#define _FB_DRAW_H + +#include <asm/types.h> + + /* + * Compose two values, using a bitmask as decision value + * This is equivalent to (a & mask) | (b & ~mask) + */ + +static inline unsigned long +comp(unsigned long a, unsigned long b, unsigned long mask) +{ + return ((a ^ b) & mask) ^ b; +} + + /* + * Create a pattern with the given pixel's color + */ + +#if BITS_PER_LONG == 64 +static inline unsigned long +pixel_to_pat( u32 bpp, u32 pixel) +{ + switch (bpp) { + case 1: + return 0xfffffffffffffffful*pixel; + case 2: + return 0x5555555555555555ul*pixel; + case 4: + return 0x1111111111111111ul*pixel; + case 8: + return 0x0101010101010101ul*pixel; + case 12: + return 0x0001001001001001ul*pixel; + case 16: + return 0x0001000100010001ul*pixel; + case 24: + return 0x0000000001000001ul*pixel; + case 32: + return 0x0000000100000001ul*pixel; + default: + panic("pixel_to_pat(): unsupported pixelformat\n"); + } +} +#else +static inline unsigned long +pixel_to_pat( u32 bpp, u32 pixel) +{ + switch (bpp) { + case 1: + return 0xfffffffful*pixel; + case 2: + return 0x55555555ul*pixel; + case 4: + return 0x11111111ul*pixel; + case 8: + return 0x01010101ul*pixel; + case 12: + return 0x00001001ul*pixel; + case 16: + return 0x00010001ul*pixel; + case 24: + return 0x00000001ul*pixel; + case 32: + return 0x00000001ul*pixel; + default: + panic("pixel_to_pat(): unsupported pixelformat\n"); + } +} +#endif +#endif /* FB_DRAW_H */ diff --git a/drivers/video/fb_sys_fops.c b/drivers/video/fb_sys_fops.c new file mode 100644 index 000000000000..cf2538d669cd --- /dev/null +++ b/drivers/video/fb_sys_fops.c @@ -0,0 +1,104 @@ +/* + * linux/drivers/video/fb_sys_read.c - Generic file operations where + * framebuffer is in system RAM + * + * Copyright (C) 2007 Antonino Daplas <adaplas@pol.net> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + */ +#include <linux/fb.h> +#include <linux/module.h> +#include <asm/uaccess.h> + +ssize_t fb_sys_read(struct fb_info *info, char __user *buf, size_t count, + loff_t *ppos) +{ + unsigned long p = *ppos; + void *src; + int err = 0; + unsigned long total_size; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->screen_size; + + if (total_size == 0) + total_size = info->fix.smem_len; + + if (p >= total_size) + return 0; + + if (count >= total_size) + count = total_size; + + if (count + p > total_size) + count = total_size - p; + + src = (void __force *)(info->screen_base + p); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + if (copy_to_user(buf, src, count)) + err = -EFAULT; + + if (!err) + *ppos += count; + + return (err) ? err : count; +} +EXPORT_SYMBOL_GPL(fb_sys_read); + +ssize_t fb_sys_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + unsigned long p = *ppos; + void *dst; + int err = 0; + unsigned long total_size; + + if (info->state != FBINFO_STATE_RUNNING) + return -EPERM; + + total_size = info->screen_size; + + if (total_size == 0) + total_size = info->fix.smem_len; + + if (p > total_size) + return -EFBIG; + + if (count > total_size) { + err = -EFBIG; + count = total_size; + } + + if (count + p > total_size) { + if (!err) + err = -ENOSPC; + + count = total_size - p; + } + + dst = (void __force *) (info->screen_base + p); + + if (info->fbops->fb_sync) + info->fbops->fb_sync(info); + + if (copy_from_user(dst, buf, count)) + err = -EFAULT; + + if (!err) + *ppos += count; + + return (err) ? err : count; +} +EXPORT_SYMBOL_GPL(fb_sys_write); + +MODULE_AUTHOR("Antonino Daplas <adaplas@pol.net>"); +MODULE_DESCRIPTION("Generic file read (fb in system RAM)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index 28225265159a..08d4e11d9121 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -354,59 +354,59 @@ static void fb_rotate_logo(struct fb_info *info, u8 *dst, if (rotate == FB_ROTATE_UD) { fb_rotate_logo_ud(image->data, dst, image->width, image->height); - image->dx = info->var.xres - image->width; - image->dy = info->var.yres - image->height; + image->dx = info->var.xres - image->width - image->dx; + image->dy = info->var.yres - image->height - image->dy; } else if (rotate == FB_ROTATE_CW) { fb_rotate_logo_cw(image->data, dst, image->width, image->height); tmp = image->width; image->width = image->height; image->height = tmp; - image->dx = info->var.xres - image->width; + tmp = image->dy; + image->dy = image->dx; + image->dx = info->var.xres - image->width - tmp; } else if (rotate == FB_ROTATE_CCW) { fb_rotate_logo_ccw(image->data, dst, image->width, image->height); tmp = image->width; image->width = image->height; image->height = tmp; - image->dy = info->var.yres - image->height; + tmp = image->dx; + image->dx = image->dy; + image->dy = info->var.yres - image->height - tmp; } image->data = dst; } static void fb_do_show_logo(struct fb_info *info, struct fb_image *image, - int rotate) + int rotate, unsigned int num) { - int x; + unsigned int x; if (rotate == FB_ROTATE_UR) { - for (x = 0; x < num_online_cpus() && - x * (fb_logo.logo->width + 8) <= - info->var.xres - fb_logo.logo->width; x++) { + for (x = 0; + x < num && image->dx + image->width <= info->var.xres; + x++) { info->fbops->fb_imageblit(info, image); - image->dx += fb_logo.logo->width + 8; + image->dx += image->width + 8; } } else if (rotate == FB_ROTATE_UD) { - for (x = 0; x < num_online_cpus() && - x * (fb_logo.logo->width + 8) <= - info->var.xres - fb_logo.logo->width; x++) { + for (x = 0; x < num && image->dx >= 0; x++) { info->fbops->fb_imageblit(info, image); - image->dx -= fb_logo.logo->width + 8; + image->dx -= image->width + 8; } } else if (rotate == FB_ROTATE_CW) { - for (x = 0; x < num_online_cpus() && - x * (fb_logo.logo->width + 8) <= - info->var.yres - fb_logo.logo->width; x++) { + for (x = 0; + x < num && image->dy + image->height <= info->var.yres; + x++) { info->fbops->fb_imageblit(info, image); - image->dy += fb_logo.logo->width + 8; + image->dy += image->height + 8; } } else if (rotate == FB_ROTATE_CCW) { - for (x = 0; x < num_online_cpus() && - x * (fb_logo.logo->width + 8) <= - info->var.yres - fb_logo.logo->width; x++) { + for (x = 0; x < num && image->dy >= 0; x++) { info->fbops->fb_imageblit(info, image); - image->dy -= fb_logo.logo->width + 8; + image->dy -= image->height + 8; } } } @@ -418,7 +418,8 @@ int fb_prepare_logo(struct fb_info *info, int rotate) memset(&fb_logo, 0, sizeof(struct logo_data)); - if (info->flags & FBINFO_MISC_TILEBLITTING) + if (info->flags & FBINFO_MISC_TILEBLITTING || + info->flags & FBINFO_MODULE) return 0; if (info->fix.visual == FB_VISUAL_DIRECTCOLOR) { @@ -483,7 +484,8 @@ int fb_show_logo(struct fb_info *info, int rotate) struct fb_image image; /* Return if the frame buffer is not mapped or suspended */ - if (fb_logo.logo == NULL || info->state != FBINFO_STATE_RUNNING) + if (fb_logo.logo == NULL || info->state != FBINFO_STATE_RUNNING || + info->flags & FBINFO_MODULE) return 0; image.depth = 8; @@ -532,7 +534,7 @@ int fb_show_logo(struct fb_info *info, int rotate) fb_rotate_logo(info, logo_rotate, &image, rotate); } - fb_do_show_logo(info, &image, rotate); + fb_do_show_logo(info, &image, rotate, num_online_cpus()); kfree(palette); if (saved_pseudo_palette != NULL) @@ -586,7 +588,7 @@ fb_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) return -EPERM; if (info->fbops->fb_read) - return info->fbops->fb_read(file, buf, count, ppos); + return info->fbops->fb_read(info, buf, count, ppos); total_size = info->screen_size; @@ -661,7 +663,7 @@ fb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) return -EPERM; if (info->fbops->fb_write) - return info->fbops->fb_write(file, buf, count, ppos); + return info->fbops->fb_write(info, buf, count, ppos); total_size = info->screen_size; @@ -771,14 +773,37 @@ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var) return 0; } +static int fb_check_caps(struct fb_info *info, struct fb_var_screeninfo *var, + u32 activate) +{ + struct fb_event event; + struct fb_blit_caps caps, fbcaps; + int err = 0; + + memset(&caps, 0, sizeof(caps)); + memset(&fbcaps, 0, sizeof(fbcaps)); + caps.flags = (activate & FB_ACTIVATE_ALL) ? 1 : 0; + event.info = info; + event.data = ∩︀ + fb_notifier_call_chain(FB_EVENT_GET_REQ, &event); + info->fbops->fb_get_caps(info, &fbcaps, var); + + if (((fbcaps.x ^ caps.x) & caps.x) || + ((fbcaps.y ^ caps.y) & caps.y) || + (fbcaps.len < caps.len)) + err = -EINVAL; + + return err; +} + int fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var) { - int err, flags = info->flags; + int flags = info->flags; + int ret = 0; if (var->activate & FB_ACTIVATE_INV_MODE) { struct fb_videomode mode1, mode2; - int ret = 0; fb_var_to_videomode(&mode1, var); fb_var_to_videomode(&mode2, &info->var); @@ -796,40 +821,51 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var) if (!ret) fb_delete_videomode(&mode1, &info->modelist); - return ret; + + ret = (ret) ? -EINVAL : 0; + goto done; } if ((var->activate & FB_ACTIVATE_FORCE) || memcmp(&info->var, var, sizeof(struct fb_var_screeninfo))) { + u32 activate = var->activate; + if (!info->fbops->fb_check_var) { *var = info->var; - return 0; + goto done; } - if ((err = info->fbops->fb_check_var(var, info))) - return err; + ret = info->fbops->fb_check_var(var, info); + + if (ret) + goto done; if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) { struct fb_videomode mode; - int err = 0; + + if (info->fbops->fb_get_caps) { + ret = fb_check_caps(info, var, activate); + + if (ret) + goto done; + } info->var = *var; + if (info->fbops->fb_set_par) info->fbops->fb_set_par(info); fb_pan_display(info, &info->var); - fb_set_cmap(&info->cmap, info); - fb_var_to_videomode(&mode, &info->var); if (info->modelist.prev && info->modelist.next && !list_empty(&info->modelist)) - err = fb_add_videomode(&mode, &info->modelist); + ret = fb_add_videomode(&mode, &info->modelist); - if (!err && (flags & FBINFO_MISC_USEREVENT)) { + if (!ret && (flags & FBINFO_MISC_USEREVENT)) { struct fb_event event; - int evnt = (var->activate & FB_ACTIVATE_ALL) ? + int evnt = (activate & FB_ACTIVATE_ALL) ? FB_EVENT_MODE_CHANGE_ALL : FB_EVENT_MODE_CHANGE; @@ -839,7 +875,9 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var) } } } - return 0; + + done: + return ret; } int @@ -1266,6 +1304,9 @@ static const struct file_operations fb_fops = { #ifdef HAVE_ARCH_FB_UNMAPPED_AREA .get_unmapped_area = get_fb_unmapped_area, #endif +#ifdef CONFIG_FB_DEFERRED_IO + .fsync = fb_deferred_io_fsync, +#endif }; struct class *fb_class; @@ -1316,6 +1357,12 @@ register_framebuffer(struct fb_info *fb_info) } fb_info->pixmap.offset = 0; + if (!fb_info->pixmap.blit_x) + fb_info->pixmap.blit_x = ~(u32)0; + + if (!fb_info->pixmap.blit_y) + fb_info->pixmap.blit_y = ~(u32)0; + if (!fb_info->modelist.prev || !fb_info->modelist.next) INIT_LIST_HEAD(&fb_info->modelist); diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c index 6b385c39b8b5..438b9411905c 100644 --- a/drivers/video/fbmon.c +++ b/drivers/video/fbmon.c @@ -48,8 +48,9 @@ #define DPRINTK(fmt, args...) #endif -#define FBMON_FIX_HEADER 1 -#define FBMON_FIX_INPUT 2 +#define FBMON_FIX_HEADER 1 +#define FBMON_FIX_INPUT 2 +#define FBMON_FIX_TIMINGS 3 #ifdef CONFIG_FB_MODE_HELPERS struct broken_edid { @@ -71,6 +72,12 @@ static const struct broken_edid brokendb[] = { .model = 0x5a44, .fix = FBMON_FIX_INPUT, }, + /* Sharp UXGA? */ + { + .manufacturer = "SHP", + .model = 0x138e, + .fix = FBMON_FIX_TIMINGS, + }, }; static const unsigned char edid_v1_header[] = { 0x00, 0xff, 0xff, 0xff, @@ -87,6 +94,55 @@ static void copy_string(unsigned char *c, unsigned char *s) while (i-- && (*--s == 0x20)) *s = 0; } +static int edid_is_serial_block(unsigned char *block) +{ + if ((block[0] == 0x00) && (block[1] == 0x00) && + (block[2] == 0x00) && (block[3] == 0xff) && + (block[4] == 0x00)) + return 1; + else + return 0; +} + +static int edid_is_ascii_block(unsigned char *block) +{ + if ((block[0] == 0x00) && (block[1] == 0x00) && + (block[2] == 0x00) && (block[3] == 0xfe) && + (block[4] == 0x00)) + return 1; + else + return 0; +} + +static int edid_is_limits_block(unsigned char *block) +{ + if ((block[0] == 0x00) && (block[1] == 0x00) && + (block[2] == 0x00) && (block[3] == 0xfd) && + (block[4] == 0x00)) + return 1; + else + return 0; +} + +static int edid_is_monitor_block(unsigned char *block) +{ + if ((block[0] == 0x00) && (block[1] == 0x00) && + (block[2] == 0x00) && (block[3] == 0xfc) && + (block[4] == 0x00)) + return 1; + else + return 0; +} + +static int edid_is_timing_block(unsigned char *block) +{ + if ((block[0] != 0x00) || (block[1] != 0x00) || + (block[2] != 0x00) || (block[4] != 0x00)) + return 1; + else + return 0; +} + static int check_edid(unsigned char *edid) { unsigned char *block = edid + ID_MANUFACTURER_NAME, manufacturer[4]; @@ -104,9 +160,6 @@ static int check_edid(unsigned char *edid) for (i = 0; i < ARRAY_SIZE(brokendb); i++) { if (!strncmp(manufacturer, brokendb[i].manufacturer, 4) && brokendb[i].model == model) { - printk("fbmon: The EDID Block of " - "Manufacturer: %s Model: 0x%x is known to " - "be broken,\n", manufacturer, model); fix = brokendb[i].fix; break; } @@ -115,8 +168,10 @@ static int check_edid(unsigned char *edid) switch (fix) { case FBMON_FIX_HEADER: for (i = 0; i < 8; i++) { - if (edid[i] != edid_v1_header[i]) + if (edid[i] != edid_v1_header[i]) { ret = fix; + break; + } } break; case FBMON_FIX_INPUT: @@ -126,14 +181,34 @@ static int check_edid(unsigned char *edid) if (b[4] & 0x01 && b[0] & 0x80) ret = fix; break; + case FBMON_FIX_TIMINGS: + b = edid + DETAILED_TIMING_DESCRIPTIONS_START; + ret = fix; + + for (i = 0; i < 4; i++) { + if (edid_is_limits_block(b)) { + ret = 0; + break; + } + + b += DETAILED_TIMING_DESCRIPTION_SIZE; + } + + break; } + if (ret) + printk("fbmon: The EDID Block of " + "Manufacturer: %s Model: 0x%x is known to " + "be broken,\n", manufacturer, model); + return ret; } static void fix_edid(unsigned char *edid, int fix) { - unsigned char *b; + int i; + unsigned char *b, csum = 0; switch (fix) { case FBMON_FIX_HEADER: @@ -145,6 +220,37 @@ static void fix_edid(unsigned char *edid, int fix) b = edid + EDID_STRUCT_DISPLAY; b[0] &= ~0x80; edid[127] += 0x80; + break; + case FBMON_FIX_TIMINGS: + printk("fbmon: trying to fix monitor timings\n"); + b = edid + DETAILED_TIMING_DESCRIPTIONS_START; + for (i = 0; i < 4; i++) { + if (!(edid_is_serial_block(b) || + edid_is_ascii_block(b) || + edid_is_monitor_block(b) || + edid_is_timing_block(b))) { + b[0] = 0x00; + b[1] = 0x00; + b[2] = 0x00; + b[3] = 0xfd; + b[4] = 0x00; + b[5] = 60; /* vfmin */ + b[6] = 60; /* vfmax */ + b[7] = 30; /* hfmin */ + b[8] = 75; /* hfmax */ + b[9] = 17; /* pixclock - 170 MHz*/ + b[10] = 0; /* GTF */ + break; + } + + b += DETAILED_TIMING_DESCRIPTION_SIZE; + } + + for (i = 0; i < EDID_LENGTH - 1; i++) + csum += edid[i]; + + edid[127] = 256 - csum; + break; } } @@ -273,46 +379,6 @@ static void get_chroma(unsigned char *block, struct fb_monspecs *specs) DPRINTK("WhiteY: 0.%03d\n", specs->chroma.whitey); } -static int edid_is_serial_block(unsigned char *block) -{ - if ((block[0] == 0x00) && (block[1] == 0x00) && - (block[2] == 0x00) && (block[3] == 0xff) && - (block[4] == 0x00)) - return 1; - else - return 0; -} - -static int edid_is_ascii_block(unsigned char *block) -{ - if ((block[0] == 0x00) && (block[1] == 0x00) && - (block[2] == 0x00) && (block[3] == 0xfe) && - (block[4] == 0x00)) - return 1; - else - return 0; -} - -static int edid_is_limits_block(unsigned char *block) -{ - if ((block[0] == 0x00) && (block[1] == 0x00) && - (block[2] == 0x00) && (block[3] == 0xfd) && - (block[4] == 0x00)) - return 1; - else - return 0; -} - -static int edid_is_monitor_block(unsigned char *block) -{ - if ((block[0] == 0x00) && (block[1] == 0x00) && - (block[2] == 0x00) && (block[3] == 0xfc) && - (block[4] == 0x00)) - return 1; - else - return 0; -} - static void calc_mode_timings(int xres, int yres, int refresh, struct fb_videomode *mode) { @@ -795,15 +861,6 @@ static void get_monspecs(unsigned char *edid, struct fb_monspecs *specs) } } -static int edid_is_timing_block(unsigned char *block) -{ - if ((block[0] != 0x00) || (block[1] != 0x00) || - (block[2] != 0x00) || (block[4] != 0x00)) - return 1; - else - return 0; -} - int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var) { int i; diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c index 40c80c8190e2..d4a2c11d9809 100644 --- a/drivers/video/fbsysfs.c +++ b/drivers/video/fbsysfs.c @@ -376,7 +376,7 @@ static ssize_t show_pan(struct device *device, { struct fb_info *fb_info = dev_get_drvdata(device); return snprintf(buf, PAGE_SIZE, "%d,%d\n", fb_info->var.xoffset, - fb_info->var.xoffset); + fb_info->var.yoffset); } static ssize_t show_name(struct device *device, diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c new file mode 100644 index 000000000000..abfcb50364c8 --- /dev/null +++ b/drivers/video/hecubafb.c @@ -0,0 +1,471 @@ +/* + * linux/drivers/video/hecubafb.c -- FB driver for Hecuba controller + * + * Copyright (C) 2006, Jaya Kumar + * This work was sponsored by CIS(M) Sdn Bhd + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. + * This work was possible because of apollo display code from E-Ink's website + * http://support.eink.com/community + * All information used to write this code is from public material made + * available by E-Ink on its support site. Some commands such as 0xA4 + * were found by looping through cmd=0x00 thru 0xFF and supplying random + * values. There are other commands that the display is capable of, + * beyond the 5 used here but they are more complex. + * + * This driver is written to be used with the Hecuba display controller + * board, and tested with the EInk 800x600 display in 1 bit mode. + * The interface between Hecuba and the host is TTL based GPIO. The + * GPIO requirements are 8 writable data lines and 6 lines for control. + * Only 4 of the controls are actually used here but 6 for future use. + * The driver requires the IO addresses for data and control GPIO at + * load time. It is also possible to use this display with a standard + * PC parallel port. + * + * General notes: + * - User must set hecubafb_enable=1 to enable it + * - User must set dio_addr=0xIOADDR cio_addr=0xIOADDR c2io_addr=0xIOADDR + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/list.h> +#include <asm/uaccess.h> + +/* Apollo controller specific defines */ +#define APOLLO_START_NEW_IMG 0xA0 +#define APOLLO_STOP_IMG_DATA 0xA1 +#define APOLLO_DISPLAY_IMG 0xA2 +#define APOLLO_ERASE_DISPLAY 0xA3 +#define APOLLO_INIT_DISPLAY 0xA4 + +/* Hecuba interface specific defines */ +/* WUP is inverted, CD is inverted, DS is inverted */ +#define HCB_NWUP_BIT 0x01 +#define HCB_NDS_BIT 0x02 +#define HCB_RW_BIT 0x04 +#define HCB_NCD_BIT 0x08 +#define HCB_ACK_BIT 0x80 + +/* Display specific information */ +#define DPY_W 600 +#define DPY_H 800 + +struct hecubafb_par { + unsigned long dio_addr; + unsigned long cio_addr; + unsigned long c2io_addr; + unsigned char ctl; + struct fb_info *info; + unsigned int irq; +}; + +static struct fb_fix_screeninfo hecubafb_fix __devinitdata = { + .id = "hecubafb", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_MONO01, + .xpanstep = 0, + .ypanstep = 0, + .ywrapstep = 0, + .accel = FB_ACCEL_NONE, +}; + +static struct fb_var_screeninfo hecubafb_var __devinitdata = { + .xres = DPY_W, + .yres = DPY_H, + .xres_virtual = DPY_W, + .yres_virtual = DPY_H, + .bits_per_pixel = 1, + .nonstd = 1, +}; + +static unsigned long dio_addr; +static unsigned long cio_addr; +static unsigned long c2io_addr; +static unsigned long splashval; +static unsigned int nosplash; +static unsigned int hecubafb_enable; +static unsigned int irq; + +static DECLARE_WAIT_QUEUE_HEAD(hecubafb_waitq); + +static void hcb_set_ctl(struct hecubafb_par *par) +{ + outb(par->ctl, par->cio_addr); +} + +static unsigned char hcb_get_ctl(struct hecubafb_par *par) +{ + return inb(par->c2io_addr); +} + +static void hcb_set_data(struct hecubafb_par *par, unsigned char value) +{ + outb(value, par->dio_addr); +} + +static int __devinit apollo_init_control(struct hecubafb_par *par) +{ + unsigned char ctl; + /* for init, we want the following setup to be set: + WUP = lo + ACK = hi + DS = hi + RW = hi + CD = lo + */ + + /* write WUP to lo, DS to hi, RW to hi, CD to lo */ + par->ctl = HCB_NWUP_BIT | HCB_RW_BIT | HCB_NCD_BIT ; + par->ctl &= ~HCB_NDS_BIT; + hcb_set_ctl(par); + + /* check ACK is not lo */ + ctl = hcb_get_ctl(par); + if ((ctl & HCB_ACK_BIT)) { + printk(KERN_ERR "Fail because ACK is already low\n"); + return -ENXIO; + } + + return 0; +} + +static void hcb_wait_for_ack(struct hecubafb_par *par) +{ + + int timeout; + unsigned char ctl; + + timeout=500; + do { + ctl = hcb_get_ctl(par); + if ((ctl & HCB_ACK_BIT)) + return; + udelay(1); + } while (timeout--); + printk(KERN_ERR "timed out waiting for ack\n"); +} + +static void hcb_wait_for_ack_clear(struct hecubafb_par *par) +{ + + int timeout; + unsigned char ctl; + + timeout=500; + do { + ctl = hcb_get_ctl(par); + if (!(ctl & HCB_ACK_BIT)) + return; + udelay(1); + } while (timeout--); + printk(KERN_ERR "timed out waiting for clear\n"); +} + +static void apollo_send_data(struct hecubafb_par *par, unsigned char data) +{ + /* set data */ + hcb_set_data(par, data); + + /* set DS low */ + par->ctl |= HCB_NDS_BIT; + hcb_set_ctl(par); + + hcb_wait_for_ack(par); + + /* set DS hi */ + par->ctl &= ~(HCB_NDS_BIT); + hcb_set_ctl(par); + + hcb_wait_for_ack_clear(par); +} + +static void apollo_send_command(struct hecubafb_par *par, unsigned char data) +{ + /* command so set CD to high */ + par->ctl &= ~(HCB_NCD_BIT); + hcb_set_ctl(par); + + /* actually strobe with command */ + apollo_send_data(par, data); + + /* clear CD back to low */ + par->ctl |= (HCB_NCD_BIT); + hcb_set_ctl(par); +} + +/* main hecubafb functions */ + +static void hecubafb_dpy_update(struct hecubafb_par *par) +{ + int i; + unsigned char *buf = (unsigned char __force *)par->info->screen_base; + + apollo_send_command(par, 0xA0); + + for (i=0; i < (DPY_W*DPY_H/8); i++) { + apollo_send_data(par, *(buf++)); + } + + apollo_send_command(par, 0xA1); + apollo_send_command(par, 0xA2); +} + +/* this is called back from the deferred io workqueue */ +static void hecubafb_dpy_deferred_io(struct fb_info *info, + struct list_head *pagelist) +{ + hecubafb_dpy_update(info->par); +} + +static void hecubafb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) +{ + struct hecubafb_par *par = info->par; + + sys_fillrect(info, rect); + + hecubafb_dpy_update(par); +} + +static void hecubafb_copyarea(struct fb_info *info, + const struct fb_copyarea *area) +{ + struct hecubafb_par *par = info->par; + + sys_copyarea(info, area); + + hecubafb_dpy_update(par); +} + +static void hecubafb_imageblit(struct fb_info *info, + const struct fb_image *image) +{ + struct hecubafb_par *par = info->par; + + sys_imageblit(info, image); + + hecubafb_dpy_update(par); +} + +/* + * this is the slow path from userspace. they can seek and write to + * the fb. it's inefficient to do anything less than a full screen draw + */ +static ssize_t hecubafb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + unsigned long p; + int err=-EINVAL; + struct hecubafb_par *par; + unsigned int xres; + unsigned int fbmemlength; + + p = *ppos; + par = info->par; + xres = info->var.xres; + fbmemlength = (xres * info->var.yres)/8; + + if (p > fbmemlength) + return -ENOSPC; + + err = 0; + if ((count + p) > fbmemlength) { + count = fbmemlength - p; + err = -ENOSPC; + } + + if (count) { + char *base_addr; + + base_addr = (char __force *)info->screen_base; + count -= copy_from_user(base_addr + p, buf, count); + *ppos += count; + err = -EFAULT; + } + + hecubafb_dpy_update(par); + + if (count) + return count; + + return err; +} + +static struct fb_ops hecubafb_ops = { + .owner = THIS_MODULE, + .fb_read = fb_sys_read, + .fb_write = hecubafb_write, + .fb_fillrect = hecubafb_fillrect, + .fb_copyarea = hecubafb_copyarea, + .fb_imageblit = hecubafb_imageblit, +}; + +static struct fb_deferred_io hecubafb_defio = { + .delay = HZ, + .deferred_io = hecubafb_dpy_deferred_io, +}; + +static int __devinit hecubafb_probe(struct platform_device *dev) +{ + struct fb_info *info; + int retval = -ENOMEM; + int videomemorysize; + unsigned char *videomemory; + struct hecubafb_par *par; + + videomemorysize = (DPY_W*DPY_H)/8; + + if (!(videomemory = vmalloc(videomemorysize))) + return retval; + + memset(videomemory, 0, videomemorysize); + + info = framebuffer_alloc(sizeof(struct hecubafb_par), &dev->dev); + if (!info) + goto err; + + info->screen_base = (char __iomem *) videomemory; + info->fbops = &hecubafb_ops; + + info->var = hecubafb_var; + info->fix = hecubafb_fix; + info->fix.smem_len = videomemorysize; + par = info->par; + par->info = info; + + if (!dio_addr || !cio_addr || !c2io_addr) { + printk(KERN_WARNING "no IO addresses supplied\n"); + goto err1; + } + par->dio_addr = dio_addr; + par->cio_addr = cio_addr; + par->c2io_addr = c2io_addr; + info->flags = FBINFO_FLAG_DEFAULT; + + info->fbdefio = &hecubafb_defio; + fb_deferred_io_init(info); + + retval = register_framebuffer(info); + if (retval < 0) + goto err1; + platform_set_drvdata(dev, info); + + printk(KERN_INFO + "fb%d: Hecuba frame buffer device, using %dK of video memory\n", + info->node, videomemorysize >> 10); + + /* this inits the dpy */ + apollo_init_control(par); + + apollo_send_command(par, APOLLO_INIT_DISPLAY); + apollo_send_data(par, 0x81); + + /* have to wait while display resets */ + udelay(1000); + + /* if we were told to splash the screen, we just clear it */ + if (!nosplash) { + apollo_send_command(par, APOLLO_ERASE_DISPLAY); + apollo_send_data(par, splashval); + } + + return 0; +err1: + framebuffer_release(info); +err: + vfree(videomemory); + return retval; +} + +static int __devexit hecubafb_remove(struct platform_device *dev) +{ + struct fb_info *info = platform_get_drvdata(dev); + + if (info) { + fb_deferred_io_cleanup(info); + unregister_framebuffer(info); + vfree((void __force *)info->screen_base); + framebuffer_release(info); + } + return 0; +} + +static struct platform_driver hecubafb_driver = { + .probe = hecubafb_probe, + .remove = hecubafb_remove, + .driver = { + .name = "hecubafb", + }, +}; + +static struct platform_device *hecubafb_device; + +static int __init hecubafb_init(void) +{ + int ret; + + if (!hecubafb_enable) { + printk(KERN_ERR "Use hecubafb_enable to enable the device\n"); + return -ENXIO; + } + + ret = platform_driver_register(&hecubafb_driver); + if (!ret) { + hecubafb_device = platform_device_alloc("hecubafb", 0); + if (hecubafb_device) + ret = platform_device_add(hecubafb_device); + else + ret = -ENOMEM; + + if (ret) { + platform_device_put(hecubafb_device); + platform_driver_unregister(&hecubafb_driver); + } + } + return ret; + +} + +static void __exit hecubafb_exit(void) +{ + platform_device_unregister(hecubafb_device); + platform_driver_unregister(&hecubafb_driver); +} + +module_param(nosplash, uint, 0); +MODULE_PARM_DESC(nosplash, "Disable doing the splash screen"); +module_param(hecubafb_enable, uint, 0); +MODULE_PARM_DESC(hecubafb_enable, "Enable communication with Hecuba board"); +module_param(dio_addr, ulong, 0); +MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480"); +module_param(cio_addr, ulong, 0); +MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400"); +module_param(c2io_addr, ulong, 0); +MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408"); +module_param(splashval, ulong, 0); +MODULE_PARM_DESC(splashval, "Splash pattern: 0x00 is black, 0x01 is white"); +module_param(irq, uint, 0); +MODULE_PARM_DESC(irq, "IRQ for the Hecuba board"); + +module_init(hecubafb_init); +module_exit(hecubafb_exit); + +MODULE_DESCRIPTION("fbdev driver for Hecuba board"); +MODULE_AUTHOR("Jaya Kumar"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/i810/i810.h b/drivers/video/i810/i810.h index aa65ffce915b..889e4ea5edc1 100644 --- a/drivers/video/i810/i810.h +++ b/drivers/video/i810/i810.h @@ -133,7 +133,7 @@ /* Masks (AND ops) and OR's */ #define FB_START_MASK (0x3f << (32 - 6)) #define MMIO_ADDR_MASK (0x1FFF << (32 - 13)) -#define FREQ_MASK 0x1EF +#define FREQ_MASK (1 << 4) #define SCR_OFF 0x20 #define DRAM_ON 0x08 #define DRAM_OFF 0xE7 diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c index c1eb18bf0883..16bc8d75e36e 100644 --- a/drivers/video/intelfb/intelfbhw.c +++ b/drivers/video/intelfb/intelfbhw.c @@ -1428,6 +1428,24 @@ static void refresh_ring(struct intelfb_info *dinfo); static void reset_state(struct intelfb_info *dinfo); static void do_flush(struct intelfb_info *dinfo); +static u32 get_ring_space(struct intelfb_info *dinfo) +{ + u32 ring_space; + + if (dinfo->ring_tail >= dinfo->ring_head) + ring_space = dinfo->ring.size - + (dinfo->ring_tail - dinfo->ring_head); + else + ring_space = dinfo->ring_head - dinfo->ring_tail; + + if (ring_space > RING_MIN_FREE) + ring_space -= RING_MIN_FREE; + else + ring_space = 0; + + return ring_space; +} + static int wait_ring(struct intelfb_info *dinfo, int n) { @@ -1442,13 +1460,8 @@ wait_ring(struct intelfb_info *dinfo, int n) end = jiffies + (HZ * 3); while (dinfo->ring_space < n) { dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK; - if (dinfo->ring_tail + RING_MIN_FREE < dinfo->ring_head) - dinfo->ring_space = dinfo->ring_head - - (dinfo->ring_tail + RING_MIN_FREE); - else - dinfo->ring_space = (dinfo->ring.size + - dinfo->ring_head) - - (dinfo->ring_tail + RING_MIN_FREE); + dinfo->ring_space = get_ring_space(dinfo); + if (dinfo->ring_head != last_head) { end = jiffies + (HZ * 3); last_head = dinfo->ring_head; @@ -1513,12 +1526,7 @@ refresh_ring(struct intelfb_info *dinfo) dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK; dinfo->ring_tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK; - if (dinfo->ring_tail + RING_MIN_FREE < dinfo->ring_head) - dinfo->ring_space = dinfo->ring_head - - (dinfo->ring_tail + RING_MIN_FREE); - else - dinfo->ring_space = (dinfo->ring.size + dinfo->ring_head) - - (dinfo->ring_tail + RING_MIN_FREE); + dinfo->ring_space = get_ring_space(dinfo); } static void diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig index f0e6512c87ff..9397bcef3018 100644 --- a/drivers/video/logo/Kconfig +++ b/drivers/video/logo/Kconfig @@ -2,73 +2,69 @@ # Logo configuration # -menu "Logo configuration" - -config LOGO +menuconfig LOGO bool "Bootup logo" depends on FB || SGI_NEWPORT_CONSOLE help Enable and select frame buffer bootup logos. +if LOGO + config LOGO_LINUX_MONO bool "Standard black and white Linux logo" - depends on LOGO default y config LOGO_LINUX_VGA16 bool "Standard 16-color Linux logo" - depends on LOGO default y config LOGO_LINUX_CLUT224 bool "Standard 224-color Linux logo" - depends on LOGO default y config LOGO_DEC_CLUT224 bool "224-color Digital Equipment Corporation Linux logo" - depends on LOGO && (MACH_DECSTATION || ALPHA) + depends on MACH_DECSTATION || ALPHA default y config LOGO_MAC_CLUT224 bool "224-color Macintosh Linux logo" - depends on LOGO && MAC + depends on MAC default y config LOGO_PARISC_CLUT224 bool "224-color PA-RISC Linux logo" - depends on LOGO && PARISC + depends on PARISC default y config LOGO_SGI_CLUT224 bool "224-color SGI Linux logo" - depends on LOGO && (SGI_IP22 || SGI_IP27 || SGI_IP32 || X86_VISWS) + depends on SGI_IP22 || SGI_IP27 || SGI_IP32 || X86_VISWS default y config LOGO_SUN_CLUT224 bool "224-color Sun Linux logo" - depends on LOGO && SPARC + depends on SPARC default y config LOGO_SUPERH_MONO bool "Black and white SuperH Linux logo" - depends on LOGO && SUPERH + depends on SUPERH default y config LOGO_SUPERH_VGA16 bool "16-color SuperH Linux logo" - depends on LOGO && SUPERH + depends on SUPERH default y config LOGO_SUPERH_CLUT224 bool "224-color SuperH Linux logo" - depends on LOGO && SUPERH + depends on SUPERH default y config LOGO_M32R_CLUT224 bool "224-color M32R Linux logo" - depends on LOGO && M32R + depends on M32R default y -endmenu - +endif # LOGO diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index 3e517940c5a5..3741ad729401 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -395,7 +395,7 @@ static int my_atoi(const char *name) for (;; name++) { switch (*name) { - case '0'...'9': + case '0' ... '9': val = 10*val+(*name-'0'); break; default: @@ -548,7 +548,7 @@ int fb_find_mode(struct fb_var_screeninfo *var, } else goto done; break; - case '0'...'9': + case '0' ... '9': break; case 'M': if (!yres_specified) diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c index 395ccedde9a6..bd30aba242d0 100644 --- a/drivers/video/neofb.c +++ b/drivers/video/neofb.c @@ -665,6 +665,7 @@ neofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) var->red.msb_right = 0; var->green.msb_right = 0; var->blue.msb_right = 0; + var->transp.msb_right = 0; switch (var->bits_per_pixel) { case 8: /* PSEUDOCOLOUR, 256 */ diff --git a/drivers/video/nvidia/nv_accel.c b/drivers/video/nvidia/nv_accel.c index 9efb8a3854e2..fa4821c5572b 100644 --- a/drivers/video/nvidia/nv_accel.c +++ b/drivers/video/nvidia/nv_accel.c @@ -69,27 +69,38 @@ static const int NVCopyROP_PM[16] = { 0x5A, /* invert */ }; -static inline void NVFlush(struct nvidia_par *par) +static inline void nvidiafb_safe_mode(struct fb_info *info) { + struct nvidia_par *par = info->par; + + touch_softlockup_watchdog(); + info->pixmap.scan_align = 1; + par->lockup = 1; +} + +static inline void NVFlush(struct fb_info *info) +{ + struct nvidia_par *par = info->par; int count = 1000000000; while (--count && READ_GET(par) != par->dmaPut) ; if (!count) { printk("nvidiafb: DMA Flush lockup\n"); - par->lockup = 1; + nvidiafb_safe_mode(info); } } -static inline void NVSync(struct nvidia_par *par) +static inline void NVSync(struct fb_info *info) { + struct nvidia_par *par = info->par; int count = 1000000000; while (--count && NV_RD32(par->PGRAPH, 0x0700)) ; if (!count) { printk("nvidiafb: DMA Sync lockup\n"); - par->lockup = 1; + nvidiafb_safe_mode(info); } } @@ -101,8 +112,9 @@ static void NVDmaKickoff(struct nvidia_par *par) } } -static void NVDmaWait(struct nvidia_par *par, int size) +static void NVDmaWait(struct fb_info *info, int size) { + struct nvidia_par *par = info->par; int dmaGet; int count = 1000000000, cnt; size++; @@ -135,34 +147,38 @@ static void NVDmaWait(struct nvidia_par *par, int size) } if (!count) { - printk("DMA Wait Lockup\n"); - par->lockup = 1; + printk("nvidiafb: DMA Wait Lockup\n"); + nvidiafb_safe_mode(info); } } -static void NVSetPattern(struct nvidia_par *par, u32 clr0, u32 clr1, +static void NVSetPattern(struct fb_info *info, u32 clr0, u32 clr1, u32 pat0, u32 pat1) { - NVDmaStart(par, PATTERN_COLOR_0, 4); + struct nvidia_par *par = info->par; + + NVDmaStart(info, par, PATTERN_COLOR_0, 4); NVDmaNext(par, clr0); NVDmaNext(par, clr1); NVDmaNext(par, pat0); NVDmaNext(par, pat1); } -static void NVSetRopSolid(struct nvidia_par *par, u32 rop, u32 planemask) +static void NVSetRopSolid(struct fb_info *info, u32 rop, u32 planemask) { + struct nvidia_par *par = info->par; + if (planemask != ~0) { - NVSetPattern(par, 0, planemask, ~0, ~0); + NVSetPattern(info, 0, planemask, ~0, ~0); if (par->currentRop != (rop + 32)) { - NVDmaStart(par, ROP_SET, 1); + NVDmaStart(info, par, ROP_SET, 1); NVDmaNext(par, NVCopyROP_PM[rop]); par->currentRop = rop + 32; } } else if (par->currentRop != rop) { if (par->currentRop >= 16) - NVSetPattern(par, ~0, ~0, ~0, ~0); - NVDmaStart(par, ROP_SET, 1); + NVSetPattern(info, ~0, ~0, ~0, ~0); + NVDmaStart(info, par, ROP_SET, 1); NVDmaNext(par, NVCopyROP[rop]); par->currentRop = rop; } @@ -175,7 +191,7 @@ static void NVSetClippingRectangle(struct fb_info *info, int x1, int y1, int h = y2 - y1 + 1; int w = x2 - x1 + 1; - NVDmaStart(par, CLIP_POINT, 2); + NVDmaStart(info, par, CLIP_POINT, 2); NVDmaNext(par, (y1 << 16) | x1); NVDmaNext(par, (h << 16) | w); } @@ -237,23 +253,23 @@ void NVResetGraphics(struct fb_info *info) break; } - NVDmaStart(par, SURFACE_FORMAT, 4); + NVDmaStart(info, par, SURFACE_FORMAT, 4); NVDmaNext(par, surfaceFormat); NVDmaNext(par, pitch | (pitch << 16)); NVDmaNext(par, 0); NVDmaNext(par, 0); - NVDmaStart(par, PATTERN_FORMAT, 1); + NVDmaStart(info, par, PATTERN_FORMAT, 1); NVDmaNext(par, patternFormat); - NVDmaStart(par, RECT_FORMAT, 1); + NVDmaStart(info, par, RECT_FORMAT, 1); NVDmaNext(par, rectFormat); - NVDmaStart(par, LINE_FORMAT, 1); + NVDmaStart(info, par, LINE_FORMAT, 1); NVDmaNext(par, lineFormat); par->currentRop = ~0; /* set to something invalid */ - NVSetRopSolid(par, ROP_COPY, ~0); + NVSetRopSolid(info, ROP_COPY, ~0); NVSetClippingRectangle(info, 0, 0, info->var.xres_virtual, info->var.yres_virtual); @@ -269,10 +285,10 @@ int nvidiafb_sync(struct fb_info *info) return 0; if (!par->lockup) - NVFlush(par); + NVFlush(info); if (!par->lockup) - NVSync(par); + NVSync(info); return 0; } @@ -287,7 +303,7 @@ void nvidiafb_copyarea(struct fb_info *info, const struct fb_copyarea *region) if (par->lockup) return cfb_copyarea(info, region); - NVDmaStart(par, BLIT_POINT_SRC, 3); + NVDmaStart(info, par, BLIT_POINT_SRC, 3); NVDmaNext(par, (region->sy << 16) | region->sx); NVDmaNext(par, (region->dy << 16) | region->dx); NVDmaNext(par, (region->height << 16) | region->width); @@ -312,19 +328,19 @@ void nvidiafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) color = ((u32 *) info->pseudo_palette)[rect->color]; if (rect->rop != ROP_COPY) - NVSetRopSolid(par, rect->rop, ~0); + NVSetRopSolid(info, rect->rop, ~0); - NVDmaStart(par, RECT_SOLID_COLOR, 1); + NVDmaStart(info, par, RECT_SOLID_COLOR, 1); NVDmaNext(par, color); - NVDmaStart(par, RECT_SOLID_RECTS(0), 2); + NVDmaStart(info, par, RECT_SOLID_RECTS(0), 2); NVDmaNext(par, (rect->dx << 16) | rect->dy); NVDmaNext(par, (rect->width << 16) | rect->height); NVDmaKickoff(par); if (rect->rop != ROP_COPY) - NVSetRopSolid(par, ROP_COPY, ~0); + NVSetRopSolid(info, ROP_COPY, ~0); } static void nvidiafb_mono_color_expand(struct fb_info *info, @@ -346,7 +362,7 @@ static void nvidiafb_mono_color_expand(struct fb_info *info, bg = ((u32 *) info->pseudo_palette)[image->bg_color] | mask; } - NVDmaStart(par, RECT_EXPAND_TWO_COLOR_CLIP, 7); + NVDmaStart(info, par, RECT_EXPAND_TWO_COLOR_CLIP, 7); NVDmaNext(par, (image->dy << 16) | (image->dx & 0xffff)); NVDmaNext(par, ((image->dy + image->height) << 16) | ((image->dx + image->width) & 0xffff)); @@ -357,7 +373,7 @@ static void nvidiafb_mono_color_expand(struct fb_info *info, NVDmaNext(par, (image->dy << 16) | (image->dx & 0xffff)); while (dsize >= RECT_EXPAND_TWO_COLOR_DATA_MAX_DWORDS) { - NVDmaStart(par, RECT_EXPAND_TWO_COLOR_DATA(0), + NVDmaStart(info, par, RECT_EXPAND_TWO_COLOR_DATA(0), RECT_EXPAND_TWO_COLOR_DATA_MAX_DWORDS); for (j = RECT_EXPAND_TWO_COLOR_DATA_MAX_DWORDS; j--;) { @@ -370,7 +386,7 @@ static void nvidiafb_mono_color_expand(struct fb_info *info, } if (dsize) { - NVDmaStart(par, RECT_EXPAND_TWO_COLOR_DATA(0), dsize); + NVDmaStart(info, par, RECT_EXPAND_TWO_COLOR_DATA(0), dsize); for (j = dsize; j--;) { tmp = data[k++]; diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/nvidia/nv_hw.c index ea426115c6f9..f297c7b14a41 100644 --- a/drivers/video/nvidia/nv_hw.c +++ b/drivers/video/nvidia/nv_hw.c @@ -686,7 +686,7 @@ static void nForceUpdateArbitrationSettings(unsigned VClk, if ((par->Chipset & 0x0FF0) == 0x01A0) { unsigned int uMClkPostDiv; - dev = pci_find_slot(0, 3); + dev = pci_get_bus_and_slot(0, 3); pci_read_config_dword(dev, 0x6C, &uMClkPostDiv); uMClkPostDiv = (uMClkPostDiv >> 8) & 0xf; @@ -694,11 +694,11 @@ static void nForceUpdateArbitrationSettings(unsigned VClk, uMClkPostDiv = 4; MClk = 400000 / uMClkPostDiv; } else { - dev = pci_find_slot(0, 5); + dev = pci_get_bus_and_slot(0, 5); pci_read_config_dword(dev, 0x4c, &MClk); MClk /= 1000; } - + pci_dev_put(dev); pll = NV_RD32(par->PRAMDAC0, 0x0500); M = (pll >> 0) & 0xFF; N = (pll >> 8) & 0xFF; @@ -707,19 +707,21 @@ static void nForceUpdateArbitrationSettings(unsigned VClk, sim_data.pix_bpp = (char)pixelDepth; sim_data.enable_video = 0; sim_data.enable_mp = 0; - pci_find_slot(0, 1); + dev = pci_get_bus_and_slot(0, 1); pci_read_config_dword(dev, 0x7C, &sim_data.memory_type); + pci_dev_put(dev); sim_data.memory_type = (sim_data.memory_type >> 12) & 1; sim_data.memory_width = 64; - dev = pci_find_slot(0, 3); + dev = pci_get_bus_and_slot(0, 3); pci_read_config_dword(dev, 0, &memctrl); + pci_dev_put(dev); memctrl >>= 16; if ((memctrl == 0x1A9) || (memctrl == 0x1AB) || (memctrl == 0x1ED)) { int dimm[3]; - pci_find_slot(0, 2); + dev = pci_get_bus_and_slot(0, 2); pci_read_config_dword(dev, 0x40, &dimm[0]); dimm[0] = (dimm[0] >> 8) & 0x4f; pci_read_config_dword(dev, 0x44, &dimm[1]); @@ -731,6 +733,7 @@ static void nForceUpdateArbitrationSettings(unsigned VClk, printk("nvidiafb: your nForce DIMMs are not arranged " "in optimal banks!\n"); } + pci_dev_put(dev); } sim_data.mem_latency = 3; diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c index b8588973e400..afe4567e1ff4 100644 --- a/drivers/video/nvidia/nv_i2c.c +++ b/drivers/video/nvidia/nv_i2c.c @@ -30,16 +30,14 @@ static void nvidia_gpio_setscl(void *data, int state) struct nvidia_par *par = chan->par; u32 val; - VGA_WR08(par->PCIO, 0x3d4, chan->ddc_base + 1); - val = VGA_RD08(par->PCIO, 0x3d5) & 0xf0; + val = NVReadCrtc(par, chan->ddc_base + 1) & 0xf0; if (state) val |= 0x20; else val &= ~0x20; - VGA_WR08(par->PCIO, 0x3d4, chan->ddc_base + 1); - VGA_WR08(par->PCIO, 0x3d5, val | 0x1); + NVWriteCrtc(par, chan->ddc_base + 1, val | 0x01); } static void nvidia_gpio_setsda(void *data, int state) @@ -48,16 +46,14 @@ static void nvidia_gpio_setsda(void *data, int state) struct nvidia_par *par = chan->par; u32 val; - VGA_WR08(par->PCIO, 0x3d4, chan->ddc_base + 1); - val = VGA_RD08(par->PCIO, 0x3d5) & 0xf0; + val = NVReadCrtc(par, chan->ddc_base + 1) & 0xf0; if (state) val |= 0x10; else val &= ~0x10; - VGA_WR08(par->PCIO, 0x3d4, chan->ddc_base + 1); - VGA_WR08(par->PCIO, 0x3d5, val | 0x1); + NVWriteCrtc(par, chan->ddc_base + 1, val | 0x01); } static int nvidia_gpio_getscl(void *data) @@ -66,12 +62,9 @@ static int nvidia_gpio_getscl(void *data) struct nvidia_par *par = chan->par; u32 val = 0; - VGA_WR08(par->PCIO, 0x3d4, chan->ddc_base); - if (VGA_RD08(par->PCIO, 0x3d5) & 0x04) + if (NVReadCrtc(par, chan->ddc_base) & 0x04) val = 1; - val = VGA_RD08(par->PCIO, 0x3d5); - return val; } @@ -81,20 +74,21 @@ static int nvidia_gpio_getsda(void *data) struct nvidia_par *par = chan->par; u32 val = 0; - VGA_WR08(par->PCIO, 0x3d4, chan->ddc_base); - if (VGA_RD08(par->PCIO, 0x3d5) & 0x08) + if (NVReadCrtc(par, chan->ddc_base) & 0x08) val = 1; return val; } -static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name) +static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name, + unsigned int i2c_class) { int rc; strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; chan->adapter.id = I2C_HW_B_NVIDIA; + chan->adapter.class = i2c_class; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pci_dev->dev; chan->algo.setsda = nvidia_gpio_setsda; @@ -127,83 +121,39 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name) void nvidia_create_i2c_busses(struct nvidia_par *par) { - par->bus = 3; - par->chan[0].par = par; par->chan[1].par = par; par->chan[2].par = par; - par->chan[0].ddc_base = 0x3e; - nvidia_setup_i2c_bus(&par->chan[0], "nvidia #0"); + par->chan[0].ddc_base = 0x36; + nvidia_setup_i2c_bus(&par->chan[0], "nvidia #0", I2C_CLASS_HWMON); - par->chan[1].ddc_base = 0x36; - nvidia_setup_i2c_bus(&par->chan[1], "nvidia #1"); + par->chan[1].ddc_base = 0x3e; + nvidia_setup_i2c_bus(&par->chan[1], "nvidia #1", 0); par->chan[2].ddc_base = 0x50; - nvidia_setup_i2c_bus(&par->chan[2], "nvidia #2"); + nvidia_setup_i2c_bus(&par->chan[2], "nvidia #2", 0); } void nvidia_delete_i2c_busses(struct nvidia_par *par) { - if (par->chan[0].par) - i2c_del_adapter(&par->chan[0].adapter); - par->chan[0].par = NULL; - - if (par->chan[1].par) - i2c_del_adapter(&par->chan[1].adapter); - par->chan[1].par = NULL; - - if (par->chan[2].par) - i2c_del_adapter(&par->chan[2].adapter); - par->chan[2].par = NULL; - -} + int i; -static u8 *nvidia_do_probe_i2c_edid(struct nvidia_i2c_chan *chan) -{ - u8 start = 0x0; - struct i2c_msg msgs[] = { - { - .addr = 0x50, - .len = 1, - .buf = &start, - }, { - .addr = 0x50, - .flags = I2C_M_RD, - .len = EDID_LENGTH, - }, - }; - u8 *buf; - - if (!chan->par) - return NULL; - - buf = kmalloc(EDID_LENGTH, GFP_KERNEL); - if (!buf) { - dev_warn(&chan->par->pci_dev->dev, "Out of memory!\n"); - return NULL; + for (i = 0; i < 3; i++) { + if (!par->chan[i].par) + continue; + i2c_del_adapter(&par->chan[i].adapter); + par->chan[i].par = NULL; } - msgs[1].buf = buf; - - if (i2c_transfer(&chan->adapter, msgs, 2) == 2) - return buf; - dev_dbg(&chan->par->pci_dev->dev, "Unable to read EDID block.\n"); - kfree(buf); - return NULL; } int nvidia_probe_i2c_connector(struct fb_info *info, int conn, u8 **out_edid) { struct nvidia_par *par = info->par; u8 *edid = NULL; - int i; - for (i = 0; i < 3; i++) { - /* Do the real work */ - edid = nvidia_do_probe_i2c_edid(&par->chan[conn - 1]); - if (edid) - break; - } + if (par->chan[conn - 1].par) + edid = fb_ddc_read(&par->chan[conn - 1].adapter); if (!edid && conn == 1) { /* try to get from firmware */ diff --git a/drivers/video/nvidia/nv_local.h b/drivers/video/nvidia/nv_local.h index e009d242ea10..68e508daa417 100644 --- a/drivers/video/nvidia/nv_local.h +++ b/drivers/video/nvidia/nv_local.h @@ -73,9 +73,9 @@ #define NVDmaNext(par, data) \ NV_WR32(&(par)->dmaBase[(par)->dmaCurrent++], 0, (data)) -#define NVDmaStart(par, tag, size) { \ +#define NVDmaStart(info, par, tag, size) { \ if((par)->dmaFree <= (size)) \ - NVDmaWait(par, size); \ + NVDmaWait(info, size); \ NVDmaNext(par, ((size) << 18) | (tag)); \ (par)->dmaFree -= ((size) + 1); \ } diff --git a/drivers/video/nvidia/nv_of.c b/drivers/video/nvidia/nv_of.c index 163a774a1b30..73afd7eb9977 100644 --- a/drivers/video/nvidia/nv_of.c +++ b/drivers/video/nvidia/nv_of.c @@ -46,15 +46,15 @@ int nvidia_probe_of_connector(struct fb_info *info, int conn, u8 **out_edid) for (dp = NULL; (dp = of_get_next_child(parent, dp)) != NULL;) { - pname = get_property(dp, "name", NULL); + pname = of_get_property(dp, "name", NULL); if (!pname) continue; len = strlen(pname); if ((pname[len-1] == 'A' && conn == 1) || (pname[len-1] == 'B' && conn == 2)) { for (i = 0; propnames[i] != NULL; ++i) { - pedid = get_property(dp, propnames[i], - NULL); + pedid = of_get_property(dp, + propnames[i], NULL); if (pedid != NULL) break; } @@ -65,7 +65,7 @@ int nvidia_probe_of_connector(struct fb_info *info, int conn, u8 **out_edid) } if (pedid == NULL) { for (i = 0; propnames[i] != NULL; ++i) { - pedid = get_property(parent, propnames[i], NULL); + pedid = of_get_property(parent, propnames[i], NULL); if (pedid != NULL) break; } diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/nvidia/nv_setup.c index eab3e282a4de..707e2c8a13ed 100644 --- a/drivers/video/nvidia/nv_setup.c +++ b/drivers/video/nvidia/nv_setup.c @@ -261,7 +261,7 @@ static void nv10GetConfig(struct nvidia_par *par) } #endif - dev = pci_find_slot(0, 1); + dev = pci_get_bus_and_slot(0, 1); if ((par->Chipset & 0xffff) == 0x01a0) { int amt = 0; @@ -276,6 +276,7 @@ static void nv10GetConfig(struct nvidia_par *par) par->RamAmountKBytes = (NV_RD32(par->PFB, 0x020C) & 0xFFF00000) >> 10; } + pci_dev_put(dev); par->CrystalFreqKHz = (NV_RD32(par->PEXTDEV, 0x0000) & (1 << 6)) ? 14318 : 13500; @@ -656,7 +657,7 @@ int NVCommonSetup(struct fb_info *info) par->LVDS = 0; if (par->FlatPanel && par->twoHeads) { NV_WR32(par->PRAMDAC0, 0x08B0, 0x00010004); - if (par->PRAMDAC0[0x08b4] & 1) + if (NV_RD32(par->PRAMDAC0, 0x08b4) & 1) par->LVDS = 1; printk("nvidiafb: Panel is %s\n", par->LVDS ? "LVDS" : "TMDS"); } diff --git a/drivers/video/nvidia/nv_type.h b/drivers/video/nvidia/nv_type.h index 86e65dea60d3..38f7cc0a2331 100644 --- a/drivers/video/nvidia/nv_type.h +++ b/drivers/video/nvidia/nv_type.h @@ -4,8 +4,9 @@ #include <linux/fb.h> #include <linux/types.h> #include <linux/i2c.h> -#include <linux/i2c-id.h> #include <linux/i2c-algo-bit.h> +#include <linux/mutex.h> +#include <video/vga.h> #define NV_ARCH_04 0x04 #define NV_ARCH_10 0x10 @@ -94,13 +95,15 @@ struct riva_regs { struct nvidia_par { RIVA_HW_STATE SavedReg; RIVA_HW_STATE ModeReg; + RIVA_HW_STATE initial_state; RIVA_HW_STATE *CurrentState; + struct vgastate vgastate; + struct mutex open_lock; u32 pseudo_palette[16]; struct pci_dev *pci_dev; u32 Architecture; u32 CursorStart; int Chipset; - int bus; unsigned long FbAddress; u8 __iomem *FbStart; u32 FbMapSize; @@ -143,6 +146,7 @@ struct nvidia_par { int BlendingPossible; u32 paletteEnabled; u32 forceCRTC; + u32 open_count; u8 DDCBase; #ifdef CONFIG_MTRR struct { diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index b97ec6901263..7c36b5fe582e 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -200,7 +200,7 @@ static int nvidia_panel_tweak(struct nvidia_par *par, return tweak; } -static void nvidia_vga_protect(struct nvidia_par *par, int on) +static void nvidia_screen_off(struct nvidia_par *par, int on) { unsigned char tmp; @@ -649,7 +649,7 @@ static int nvidiafb_set_par(struct fb_info *info) NVLockUnlock(par, 0); } - nvidia_vga_protect(par, 1); + nvidia_screen_off(par, 1); nvidia_write_regs(par, &par->ModeReg); NVSetStartAddress(par, 0); @@ -687,7 +687,7 @@ static int nvidiafb_set_par(struct fb_info *info) par->cursor_reset = 1; - nvidia_vga_protect(par, 0); + nvidia_screen_off(par, 0); #ifdef CONFIG_BOOTX_TEXT /* Update debug text engine */ @@ -696,6 +696,7 @@ static int nvidiafb_set_par(struct fb_info *info) info->var.bits_per_pixel, info->fix.line_length); #endif + NVLockUnlock(par, 0); NVTRACE_LEAVE(); return 0; } @@ -948,8 +949,80 @@ static int nvidiafb_blank(int blank, struct fb_info *info) return 0; } +/* + * Because the VGA registers are not mapped linearly in its MMIO space, + * restrict VGA register saving and restore to x86 only, where legacy VGA IO + * access is legal. Consequently, we must also check if the device is the + * primary display. + */ +#ifdef CONFIG_X86 +static void save_vga_x86(struct nvidia_par *par) +{ + struct resource *res= &par->pci_dev->resource[PCI_ROM_RESOURCE]; + + if (res && res->flags & IORESOURCE_ROM_SHADOW) { + memset(&par->vgastate, 0, sizeof(par->vgastate)); + par->vgastate.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | + VGA_SAVE_CMAP; + save_vga(&par->vgastate); + } +} + +static void restore_vga_x86(struct nvidia_par *par) +{ + struct resource *res= &par->pci_dev->resource[PCI_ROM_RESOURCE]; + + if (res && res->flags & IORESOURCE_ROM_SHADOW) + restore_vga(&par->vgastate); +} +#else +#define save_vga_x86(x) do {} while (0) +#define restore_vga_x86(x) do {} while (0) +#endif /* X86 */ + +static int nvidiafb_open(struct fb_info *info, int user) +{ + struct nvidia_par *par = info->par; + + mutex_lock(&par->open_lock); + + if (!par->open_count) { + save_vga_x86(par); + nvidia_save_vga(par, &par->initial_state); + } + + par->open_count++; + mutex_unlock(&par->open_lock); + return 0; +} + +static int nvidiafb_release(struct fb_info *info, int user) +{ + struct nvidia_par *par = info->par; + int err = 0; + + mutex_lock(&par->open_lock); + + if (!par->open_count) { + err = -EINVAL; + goto done; + } + + if (par->open_count == 1) { + nvidia_write_regs(par, &par->initial_state); + restore_vga_x86(par); + } + + par->open_count--; +done: + mutex_unlock(&par->open_lock); + return err; +} + static struct fb_ops nvidia_fb_ops = { .owner = THIS_MODULE, + .fb_open = nvidiafb_open, + .fb_release = nvidiafb_release, .fb_check_var = nvidiafb_check_var, .fb_set_par = nvidiafb_set_par, .fb_setcolreg = nvidiafb_setcolreg, @@ -1207,7 +1280,7 @@ static int __devinit nvidiafb_probe(struct pci_dev *pd, par = info->par; par->pci_dev = pd; - + mutex_init(&par->open_lock); info->pixmap.addr = kzalloc(8 * 1024, GFP_KERNEL); if (info->pixmap.addr == NULL) diff --git a/drivers/video/offb.c b/drivers/video/offb.c index 9576a55eaf16..885b42836cbb 100644 --- a/drivers/video/offb.c +++ b/drivers/video/offb.c @@ -322,8 +322,8 @@ static void __init offb_init_fb(const char *name, const char *full_name, ioremap(base + 0x7ff000, 0x1000) + 0xcc0; par->cmap_data = par->cmap_adr + 1; par->cmap_type = cmap_m64; - } else if (dp && (device_is_compatible(dp, "pci1014,b7") || - device_is_compatible(dp, "pci1014,21c"))) { + } else if (dp && (of_device_is_compatible(dp, "pci1014,b7") || + of_device_is_compatible(dp, "pci1014,21c"))) { par->cmap_adr = offb_map_reg(dp, 0, 0x6000, 0x1000); if (par->cmap_adr) par->cmap_type = cmap_gxt2000; @@ -425,27 +425,27 @@ static void __init offb_init_nodriver(struct device_node *dp, int no_real_node) const u32 *pp, *addrp, *up; u64 asize; - pp = get_property(dp, "linux,bootx-depth", &len); + pp = of_get_property(dp, "linux,bootx-depth", &len); if (pp == NULL) - pp = get_property(dp, "depth", &len); + pp = of_get_property(dp, "depth", &len); if (pp && len == sizeof(u32)) depth = *pp; - pp = get_property(dp, "linux,bootx-width", &len); + pp = of_get_property(dp, "linux,bootx-width", &len); if (pp == NULL) - pp = get_property(dp, "width", &len); + pp = of_get_property(dp, "width", &len); if (pp && len == sizeof(u32)) width = *pp; - pp = get_property(dp, "linux,bootx-height", &len); + pp = of_get_property(dp, "linux,bootx-height", &len); if (pp == NULL) - pp = get_property(dp, "height", &len); + pp = of_get_property(dp, "height", &len); if (pp && len == sizeof(u32)) height = *pp; - pp = get_property(dp, "linux,bootx-linebytes", &len); + pp = of_get_property(dp, "linux,bootx-linebytes", &len); if (pp == NULL) - pp = get_property(dp, "linebytes", &len); + pp = of_get_property(dp, "linebytes", &len); if (pp && len == sizeof(u32) && (*pp != 0xffffffffu)) pitch = *pp; else @@ -463,9 +463,9 @@ static void __init offb_init_nodriver(struct device_node *dp, int no_real_node) * ranges and pick one that is both big enough and if possible encloses * the "address" property. If none match, we pick the biggest */ - up = get_property(dp, "linux,bootx-addr", &len); + up = of_get_property(dp, "linux,bootx-addr", &len); if (up == NULL) - up = get_property(dp, "address", &len); + up = of_get_property(dp, "address", &len); if (up && len == sizeof(u32)) addr_prop = *up; @@ -521,7 +521,7 @@ static int __init offb_init(void) return -ENODEV; /* Check if we have a MacOS display without a node spec */ - if (get_property(of_chosen, "linux,bootx-noscreen", NULL) != NULL) { + if (of_get_property(of_chosen, "linux,bootx-noscreen", NULL) != NULL) { /* The old code tried to work out which node was the MacOS * display based on the address. I'm dropping that since the * lack of a node spec only happens with old BootX versions @@ -532,14 +532,14 @@ static int __init offb_init(void) } for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { - if (get_property(dp, "linux,opened", NULL) && - get_property(dp, "linux,boot-display", NULL)) { + if (of_get_property(dp, "linux,opened", NULL) && + of_get_property(dp, "linux,boot-display", NULL)) { boot_disp = dp; offb_init_nodriver(dp, 0); } } for (dp = NULL; (dp = of_find_node_by_type(dp, "display"));) { - if (get_property(dp, "linux,opened", NULL) && + if (of_get_property(dp, "linux,opened", NULL) && dp != boot_disp) offb_init_nodriver(dp, 0); } diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c index a560a2223825..1ac5264bb2c1 100644 --- a/drivers/video/pm2fb.c +++ b/drivers/video/pm2fb.c @@ -81,8 +81,6 @@ static int lowvsync; struct pm2fb_par { pm2type_t type; /* Board type */ - u32 fb_size; /* framebuffer memory size */ - unsigned char __iomem *v_fb; /* virtual address of frame buffer */ unsigned char __iomem *v_regs;/* virtual address of p_regs */ u32 memclock; /* memclock */ u32 video; /* video flags before blanking */ @@ -103,7 +101,7 @@ static struct fb_fix_screeninfo pm2fb_fix __devinitdata = { .xpanstep = 1, .ypanstep = 1, .ywrapstep = 0, - .accel = FB_ACCEL_NONE, + .accel = FB_ACCEL_3DLABS_PERMEDIA2, }; /* @@ -206,6 +204,17 @@ static inline void WAIT_FIFO(struct pm2fb_par* p, u32 a) } #endif +static void wait_pm2(struct pm2fb_par* par) { + + WAIT_FIFO(par, 1); + pm2_WR(par, PM2R_SYNC, 0); + mb(); + do { + while (pm2_RD(par, PM2R_OUT_FIFO_WORDS) == 0); + rmb(); + } while (pm2_RD(par, PM2R_OUT_FIFO) != PM2TAG(PM2R_SYNC)); +} + /* * partial products for the supported horizontal resolutions. */ @@ -302,10 +311,10 @@ static void pm2v_mnp(u32 clk, unsigned char* mm, unsigned char* nn, s32 delta = 1000; *mm = *nn = *pp = 0; - for (n = 1; n; n++) { - for ( m = 1; m; m++) { + for ( m = 1; m < 128; m++) { + for (n = 2 * m + 1; n; n++) { for ( p = 0; p < 2; p++) { - f = PM2_REFERENCE_CLOCK * n / (m * (1 << (p + 1))); + f = ( PM2_REFERENCE_CLOCK >> ( p + 1 )) * n / m; if ( clk > f - delta && clk < f + delta ) { delta = ( clk > f ) ? clk - f : f - clk; *mm=m; @@ -462,21 +471,43 @@ static void set_memclock(struct pm2fb_par* par, u32 clk) int i; unsigned char m, n, p; - pm2_mnp(clk, &m, &n, &p); - WAIT_FIFO(par, 10); - pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 6); - wmb(); - pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_1, m); - pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_2, n); - wmb(); - pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 8|p); - wmb(); - pm2_RDAC_RD(par, PM2I_RD_MEMORY_CLOCK_STATUS); - rmb(); - for (i = 256; - i && !(pm2_RD(par, PM2R_RD_INDEXED_DATA) & PM2F_PLL_LOCKED); - i--) - ; + switch (par->type) { + case PM2_TYPE_PERMEDIA2V: + pm2v_mnp(clk/2, &m, &n, &p); + WAIT_FIFO(par, 8); + pm2_WR(par, PM2VR_RD_INDEX_HIGH, PM2VI_RD_MCLK_CONTROL >> 8); + pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 0); + wmb(); + pm2v_RDAC_WR(par, PM2VI_RD_MCLK_PRESCALE, m); + pm2v_RDAC_WR(par, PM2VI_RD_MCLK_FEEDBACK, n); + pm2v_RDAC_WR(par, PM2VI_RD_MCLK_POSTSCALE, p); + wmb(); + pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 1); + rmb(); + for (i = 256; + i && !(pm2_RDAC_RD(par, PM2VI_RD_MCLK_CONTROL) & 2); + i--) + ; + pm2_WR(par, PM2VR_RD_INDEX_HIGH, 0); + break; + case PM2_TYPE_PERMEDIA2: + pm2_mnp(clk, &m, &n, &p); + WAIT_FIFO(par, 10); + pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 6); + wmb(); + pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_1, m); + pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_2, n); + wmb(); + pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 8|p); + wmb(); + pm2_RDAC_RD(par, PM2I_RD_MEMORY_CLOCK_STATUS); + rmb(); + for (i = 256; + i && !(pm2_RD(par, PM2R_RD_INDEXED_DATA) & PM2F_PLL_LOCKED); + i--) + ; + break; + } } static void set_pixclock(struct pm2fb_par* par, u32 clk) @@ -623,6 +654,8 @@ static int pm2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) return -EINVAL; } + var->transp.offset = 0; + var->transp.length = 0; switch(var->bits_per_pixel) { case 8: var->red.length = var->green.length = var->blue.length = 8; @@ -1017,6 +1050,117 @@ static int pm2fb_blank(int blank_mode, struct fb_info *info) return 0; } +/* + * block operation. copy=0: rectangle fill, copy=1: rectangle copy. + */ +static void pm2fb_block_op(struct pm2fb_par* par, int copy, + s32 xsrc, s32 ysrc, + s32 x, s32 y, s32 w, s32 h, + u32 color) { + + if (!w || !h) + return; + WAIT_FIFO(par, 6); + pm2_WR(par, PM2R_CONFIG, PM2F_CONFIG_FB_WRITE_ENABLE | + PM2F_CONFIG_FB_READ_SOURCE_ENABLE); + pm2_WR(par, PM2R_FB_PIXEL_OFFSET, 0); + if (copy) + pm2_WR(par, PM2R_FB_SOURCE_DELTA, + ((ysrc-y) & 0xfff) << 16 | ((xsrc-x) & 0xfff)); + else + pm2_WR(par, PM2R_FB_BLOCK_COLOR, color); + pm2_WR(par, PM2R_RECTANGLE_ORIGIN, (y << 16) | x); + pm2_WR(par, PM2R_RECTANGLE_SIZE, (h << 16) | w); + wmb(); + pm2_WR(par, PM2R_RENDER,PM2F_RENDER_RECTANGLE | + (x<xsrc ? PM2F_INCREASE_X : 0) | + (y<ysrc ? PM2F_INCREASE_Y : 0) | + (copy ? 0 : PM2F_RENDER_FASTFILL)); + wait_pm2(par); +} + +static void pm2fb_fillrect (struct fb_info *info, + const struct fb_fillrect *region) +{ + struct pm2fb_par *par = info->par; + struct fb_fillrect modded; + int vxres, vyres; + u32 color = (info->fix.visual == FB_VISUAL_TRUECOLOR) ? + ((u32*)info->pseudo_palette)[region->color] : region->color; + + if (info->state != FBINFO_STATE_RUNNING) + return; + if ((info->flags & FBINFO_HWACCEL_DISABLED) || + region->rop != ROP_COPY ) { + cfb_fillrect(info, region); + return; + } + + vxres = info->var.xres_virtual; + vyres = info->var.yres_virtual; + + memcpy(&modded, region, sizeof(struct fb_fillrect)); + + if(!modded.width || !modded.height || + modded.dx >= vxres || modded.dy >= vyres) + return; + + if(modded.dx + modded.width > vxres) + modded.width = vxres - modded.dx; + if(modded.dy + modded.height > vyres) + modded.height = vyres - modded.dy; + + if(info->var.bits_per_pixel == 8) + color |= color << 8; + if(info->var.bits_per_pixel <= 16) + color |= color << 16; + + if(info->var.bits_per_pixel != 24) + pm2fb_block_op(par, 0, 0, 0, + modded.dx, modded.dy, + modded.width, modded.height, color); + else + cfb_fillrect(info, region); +} + +static void pm2fb_copyarea(struct fb_info *info, + const struct fb_copyarea *area) +{ + struct pm2fb_par *par = info->par; + struct fb_copyarea modded; + u32 vxres, vyres; + + if (info->state != FBINFO_STATE_RUNNING) + return; + if (info->flags & FBINFO_HWACCEL_DISABLED) { + cfb_copyarea(info, area); + return; + } + + memcpy(&modded, area, sizeof(struct fb_copyarea)); + + vxres = info->var.xres_virtual; + vyres = info->var.yres_virtual; + + if(!modded.width || !modded.height || + modded.sx >= vxres || modded.sy >= vyres || + modded.dx >= vxres || modded.dy >= vyres) + return; + + if(modded.sx + modded.width > vxres) + modded.width = vxres - modded.sx; + if(modded.dx + modded.width > vxres) + modded.width = vxres - modded.dx; + if(modded.sy + modded.height > vyres) + modded.height = vyres - modded.sy; + if(modded.dy + modded.height > vyres) + modded.height = vyres - modded.dy; + + pm2fb_block_op(par, 1, modded.sx, modded.sy, + modded.dx, modded.dy, + modded.width, modded.height, 0); +} + /* ------------ Hardware Independent Functions ------------ */ /* @@ -1030,8 +1174,8 @@ static struct fb_ops pm2fb_ops = { .fb_setcolreg = pm2fb_setcolreg, .fb_blank = pm2fb_blank, .fb_pan_display = pm2fb_pan_display, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, + .fb_fillrect = pm2fb_fillrect, + .fb_copyarea = pm2fb_copyarea, .fb_imageblit = cfb_imageblit, }; @@ -1119,38 +1263,47 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev, if(default_par->mem_control == 0 && default_par->boot_address == 0x31 && - default_par->mem_config == 0x259fffff && - pdev->subsystem_vendor == 0x1048 && - pdev->subsystem_device == 0x0a31) { - DPRINTK("subsystem_vendor: %04x, subsystem_device: %04x\n", - pdev->subsystem_vendor, pdev->subsystem_device); - DPRINTK("We have not been initialized by VGA BIOS " - "and are running on an Elsa Winner 2000 Office\n"); - DPRINTK("Initializing card timings manually...\n"); + default_par->mem_config == 0x259fffff) { + default_par->memclock = CVPPC_MEMCLOCK; default_par->mem_control=0; default_par->boot_address=0x20; default_par->mem_config=0xe6002021; - default_par->memclock=100000; + if (pdev->subsystem_vendor == 0x1048 && + pdev->subsystem_device == 0x0a31) { + DPRINTK("subsystem_vendor: %04x, subsystem_device: %04x\n", + pdev->subsystem_vendor, pdev->subsystem_device); + DPRINTK("We have not been initialized by VGA BIOS " + "and are running on an Elsa Winner 2000 Office\n"); + DPRINTK("Initializing card timings manually...\n"); + default_par->memclock=70000; + } + if (pdev->subsystem_vendor == 0x3d3d && + pdev->subsystem_device == 0x0100) { + DPRINTK("subsystem_vendor: %04x, subsystem_device: %04x\n", + pdev->subsystem_vendor, pdev->subsystem_device); + DPRINTK("We have not been initialized by VGA BIOS " + "and are running on an 3dlabs reference board\n"); + DPRINTK("Initializing card timings manually...\n"); + default_par->memclock=74894; + } } /* Now work out how big lfb is going to be. */ switch(default_par->mem_config & PM2F_MEM_CONFIG_RAM_MASK) { case PM2F_MEM_BANKS_1: - default_par->fb_size=0x200000; + pm2fb_fix.smem_len=0x200000; break; case PM2F_MEM_BANKS_2: - default_par->fb_size=0x400000; + pm2fb_fix.smem_len=0x400000; break; case PM2F_MEM_BANKS_3: - default_par->fb_size=0x600000; + pm2fb_fix.smem_len=0x600000; break; case PM2F_MEM_BANKS_4: - default_par->fb_size=0x800000; + pm2fb_fix.smem_len=0x800000; break; } - default_par->memclock = CVPPC_MEMCLOCK; pm2fb_fix.smem_start = pci_resource_start(pdev, 1); - pm2fb_fix.smem_len = default_par->fb_size; /* Linear frame buffer - request region and map it. */ if ( !request_mem_region(pm2fb_fix.smem_start, pm2fb_fix.smem_len, @@ -1158,9 +1311,9 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev, printk(KERN_WARNING "pm2fb: Can't reserve smem.\n"); goto err_exit_mmio; } - info->screen_base = default_par->v_fb = + info->screen_base = ioremap_nocache(pm2fb_fix.smem_start, pm2fb_fix.smem_len); - if ( !default_par->v_fb ) { + if ( !info->screen_base ) { printk(KERN_WARNING "pm2fb: Can't ioremap smem area.\n"); release_mem_region(pm2fb_fix.smem_start, pm2fb_fix.smem_len); goto err_exit_mmio; @@ -1170,7 +1323,9 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev, info->fix = pm2fb_fix; info->pseudo_palette = default_par->palette; info->flags = FBINFO_DEFAULT | - FBINFO_HWACCEL_YPAN; + FBINFO_HWACCEL_YPAN | + FBINFO_HWACCEL_COPYAREA | + FBINFO_HWACCEL_FILLRECT; if (!mode) mode = "640x480@60"; @@ -1180,13 +1335,13 @@ static int __devinit pm2fb_probe(struct pci_dev *pdev, info->var = pm2fb_var; if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) - goto err_exit_all; + goto err_exit_both; if (register_framebuffer(info) < 0) - goto err_exit_both; + goto err_exit_all; printk(KERN_INFO "fb%d: %s frame buffer device, memory = %dK.\n", - info->node, info->fix.id, default_par->fb_size / 1024); + info->node, info->fix.id, pm2fb_fix.smem_len / 1024); /* * Our driver data @@ -1242,6 +1397,9 @@ static struct pci_device_id pm2fb_id_table[] = { { PCI_VENDOR_ID_3DLABS, PCI_DEVICE_ID_3DLABS_PERMEDIA2V, PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, 0xff0000, 0 }, + { PCI_VENDOR_ID_3DLABS, PCI_DEVICE_ID_3DLABS_PERMEDIA2V, + PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NOT_DEFINED_VGA << 8, + 0xff00, 0 }, { 0, } }; diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index 07d1979bc23e..9756a728b74f 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -898,8 +898,8 @@ static int ps3fb_vsync_settings(struct gpu_driver_info *dinfo, void *dev) } ps3fb.dev = dev; - error = ps3_alloc_irq(PS3_BINDING_CPU_ANY, dinfo->irq.irq_outlet, - &ps3fb.irq_no); + error = ps3_irq_plug_setup(PS3_BINDING_CPU_ANY, dinfo->irq.irq_outlet, + &ps3fb.irq_no); if (error) { printk(KERN_ERR "%s: ps3_alloc_irq failed %d\n", __func__, error); @@ -911,7 +911,7 @@ static int ps3fb_vsync_settings(struct gpu_driver_info *dinfo, void *dev) if (error) { printk(KERN_ERR "%s: request_irq failed %d\n", __func__, error); - ps3_free_irq(ps3fb.irq_no); + ps3_irq_plug_destroy(ps3fb.irq_no); return error; } @@ -1083,7 +1083,7 @@ err_framebuffer_release: framebuffer_release(info); err_free_irq: free_irq(ps3fb.irq_no, ps3fb.dev); - ps3_free_irq(ps3fb.irq_no); + ps3_irq_plug_destroy(ps3fb.irq_no); err_iounmap_dinfo: iounmap((u8 __iomem *)ps3fb.dinfo); err_gpu_context_free: @@ -1099,7 +1099,7 @@ static void ps3fb_shutdown(struct platform_device *dev) ps3fb_flip_ctl(0); /* flip off */ ps3fb.dinfo->irq.mask = 0; free_irq(ps3fb.irq_no, ps3fb.dev); - ps3_free_irq(ps3fb.irq_no); + ps3_irq_plug_destroy(ps3fb.irq_no); iounmap((u8 __iomem *)ps3fb.dinfo); } @@ -1114,7 +1114,7 @@ void ps3fb_cleanup(void) } if (ps3fb.irq_no) { free_irq(ps3fb.irq_no, ps3fb.dev); - ps3_free_irq(ps3fb.irq_no); + ps3_irq_plug_destroy(ps3fb.irq_no); } iounmap((u8 __iomem *)ps3fb.dinfo); diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index a93618bc9d27..df2909ae704c 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -214,7 +214,7 @@ static int pvr2_init_cable(void); static int pvr2_get_param(const struct pvr2_params *p, const char *s, int val, int size); #ifdef CONFIG_SH_DMA -static ssize_t pvr2fb_write(struct file *file, const char *buf, +static ssize_t pvr2fb_write(struct fb_info *info, const char *buf, size_t count, loff_t *ppos); #endif @@ -674,7 +674,7 @@ static int pvr2_init_cable(void) } #ifdef CONFIG_SH_DMA -static ssize_t pvr2fb_write(struct file *file, const char *buf, +static ssize_t pvr2fb_write(struct fb_info *info, const char *buf, size_t count, loff_t *ppos) { unsigned long dst, start, end, len; diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 0b195f33f84f..81e571d59b50 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1203,7 +1203,7 @@ static int __init pxafb_parse_options(struct device *dev, char *options) } else goto done; break; - case '0'...'9': + case '0' ... '9': break; default: goto done; diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c index d7ece8d17a2c..0fe547842c64 100644 --- a/drivers/video/riva/fbdev.c +++ b/drivers/video/riva/fbdev.c @@ -317,15 +317,15 @@ static int riva_bl_update_status(struct backlight_device *bd) else level = bd->props.brightness; - tmp_pmc = par->riva.PMC[0x10F0/4] & 0x0000FFFF; - tmp_pcrt = par->riva.PCRTC0[0x081C/4] & 0xFFFFFFFC; + tmp_pmc = NV_RD32(par->riva.PMC, 0x10F0) & 0x0000FFFF; + tmp_pcrt = NV_RD32(par->riva.PCRTC0, 0x081C) & 0xFFFFFFFC; if(level > 0) { tmp_pcrt |= 0x1; tmp_pmc |= (1 << 31); /* backlight bit */ tmp_pmc |= riva_bl_get_level_brightness(par, level) << 16; /* level */ } - par->riva.PCRTC0[0x081C/4] = tmp_pcrt; - par->riva.PMC[0x10F0/4] = tmp_pmc; + NV_WR32(par->riva.PCRTC0, 0x081C, tmp_pcrt); + NV_WR32(par->riva.PMC, 0x10F0, tmp_pmc); return 0; } @@ -1760,13 +1760,13 @@ static int __devinit riva_get_EDID_OF(struct fb_info *info, struct pci_dev *pd) NVTRACE_ENTER(); dp = pci_device_to_OF_node(pd); for (; dp != NULL; dp = dp->child) { - disptype = get_property(dp, "display-type", NULL); + disptype = of_get_property(dp, "display-type", NULL); if (disptype == NULL) continue; if (strncmp(disptype, "LCD", 3) != 0) continue; for (i = 0; propnames[i] != NULL; ++i) { - pedid = get_property(dp, propnames[i], NULL); + pedid = of_get_property(dp, propnames[i], NULL); if (pedid != NULL) { par->EDID = (unsigned char *)pedid; NVTRACE("LCD found.\n"); @@ -1788,8 +1788,10 @@ static int __devinit riva_get_EDID_i2c(struct fb_info *info) NVTRACE_ENTER(); riva_create_i2c_busses(par); - for (i = 0; i < par->bus; i++) { - riva_probe_i2c_connector(par, i+1, &par->EDID); + for (i = 0; i < 3; i++) { + if (!par->chan[i].par) + continue; + riva_probe_i2c_connector(par, i, &par->EDID); if (par->EDID && !fb_parse_edid(par->EDID, &var)) { printk(PFX "Found EDID Block from BUS %i\n", i); break; @@ -2104,7 +2106,7 @@ err_ret: return ret; } -static void __exit rivafb_remove(struct pci_dev *pd) +static void __devexit rivafb_remove(struct pci_dev *pd) { struct fb_info *info = pci_get_drvdata(pd); struct riva_par *par = info->par; @@ -2185,7 +2187,7 @@ static struct pci_driver rivafb_driver = { .name = "rivafb", .id_table = rivafb_pci_tbl, .probe = rivafb_probe, - .remove = __exit_p(rivafb_remove), + .remove = __devexit_p(rivafb_remove), }; diff --git a/drivers/video/riva/nv4ref.h b/drivers/video/riva/nv4ref.h deleted file mode 100644 index 3b5f9117c37d..000000000000 --- a/drivers/video/riva/nv4ref.h +++ /dev/null @@ -1,2445 +0,0 @@ - /***************************************************************************\ -|* *| -|* Copyright 1993-1998 NVIDIA, Corporation. All rights reserved. *| -|* *| -|* NOTICE TO USER: The source code is copyrighted under U.S. and *| -|* international laws. Users and possessors of this source code are *| -|* hereby granted a nonexclusive, royalty-free copyright license to *| -|* use this code in individual and commercial software. *| -|* *| -|* Any use of this source code must include, in the user documenta- *| -|* tion and internal comments to the code, notices to the end user *| -|* as follows: *| -|* *| -|* Copyright 1993-1998 NVIDIA, Corporation. All rights reserved. *| -|* *| -|* NVIDIA, CORPORATION MAKES NO REPRESENTATION ABOUT THE SUITABILITY *| -|* OF THIS SOURCE CODE FOR ANY PURPOSE. IT IS PROVIDED "AS IS" *| -|* WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND. NVIDIA, CORPOR- *| -|* ATION DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOURCE CODE, *| -|* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGE- *| -|* MENT, AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL *| -|* NVIDIA, CORPORATION BE LIABLE FOR ANY SPECIAL, INDIRECT, INCI- *| -|* DENTAL, OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RE- *| -|* SULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION *| -|* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF *| -|* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOURCE CODE. *| -|* *| -|* U.S. Government End Users. This source code is a "commercial *| -|* item," as that term is defined at 48 C.F.R. 2.101 (OCT 1995), *| -|* consisting of "commercial computer software" and "commercial *| -|* computer software documentation," as such terms are used in *| -|* 48 C.F.R. 12.212 (SEPT 1995) and is provided to the U.S. Govern- *| -|* ment only as a commercial end item. Consistent with 48 C.F.R. *| -|* 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (JUNE 1995), *| -|* all U.S. Government End Users acquire the source code with only *| -|* those rights set forth herein. *| -|* *| - \***************************************************************************/ - -/* - * GPL licensing note -- nVidia is allowing a liberal interpretation of - * the documentation restriction above, to merely say that this nVidia's - * copyright and disclaimer should be included with all code derived - * from this source. -- Jeff Garzik <jgarzik@pobox.com>, 01/Nov/99 - */ - - /***************************************************************************\ -|* Modified 1999 by Fredrik Reite (fredrik@reite.com) *| - \***************************************************************************/ - - -#ifndef __NV4REF_H__ -#define __NV4REF_H__ - -/* Magic values to lock/unlock extended regs */ -#define NV_CIO_SR_LOCK_INDEX 0x0000001F /* */ -#define NV_CIO_SR_UNLOCK_RW_VALUE 0x00000057 /* */ -#define NV_CIO_SR_UNLOCK_RO_VALUE 0x00000075 /* */ -#define NV_CIO_SR_LOCK_VALUE 0x00000099 /* */ - -#define UNLOCK_EXT_MAGIC 0x57 -#define LOCK_EXT_MAGIC 0x99 /* Any value other than 0x57 will do */ - -#define LOCK_EXT_INDEX 0x6 - -#define NV_PCRTC_HORIZ_TOTAL 0x00 -#define NV_PCRTC_HORIZ_DISPLAY_END 0x01 -#define NV_PCRTC_HORIZ_BLANK_START 0x02 - -#define NV_PCRTC_HORIZ_BLANK_END 0x03 -#define NV_PCRTC_HORIZ_BLANK_END_EVRA 7:7 -#define NV_PCRTC_HORIZ_BLANK_END_DISPLAY_END_SKEW 6:5 -#define NV_PCRTC_HORIZ_BLANK_END_HORIZ_BLANK_END 4:0 - -#define NV_PCRTC_HORIZ_RETRACE_START 0x04 - -#define NV_PCRTC_HORIZ_RETRACE_END 0x05 -#define NV_PCRTC_HORIZ_RETRACE_END_HORIZ_BLANK_END_5 7:7 -#define NV_PCRTC_HORIZ_RETRACE_END_HORIZ_RETRACE_SKEW 6:5 -#define NV_PCRTC_HORIZ_RETRACE_END_HORIZ_RETRACE_END 4:0 - -#define NV_PCRTC_VERT_TOTAL 0x06 - -#define NV_PCRTC_OVERFLOW 0x07 -#define NV_PCRTC_OVERFLOW_VERT_RETRACE_START_9 7:7 -#define NV_PCRTC_OVERFLOW_VERT_DISPLAY_END_9 6:6 -#define NV_PCRTC_OVERFLOW_VERT_TOTAL_9 5:5 -#define NV_PCRTC_OVERFLOW_LINE_COMPARE_8 4:4 -#define NV_PCRTC_OVERFLOW_VERT_BLANK_START_8 3:3 -#define NV_PCRTC_OVERFLOW_VERT_RETRACE_START_8 2:2 -#define NV_PCRTC_OVERFLOW_VERT_DISPLAY_END_8 1:1 -#define NV_PCRTC_OVERFLOW_VERT_TOTAL_8 0:0 - -#define NV_PCRTC_PRESET_ROW_SCAN 0x08 - -#define NV_PCRTC_MAX_SCAN_LINE 0x09 -#define NV_PCRTC_MAX_SCAN_LINE_DOUBLE_SCAN 7:7 -#define NV_PCRTC_MAX_SCAN_LINE_LINE_COMPARE_9 6:6 -#define NV_PCRTC_MAX_SCAN_LINE_VERT_BLANK_START_9 5:5 -#define NV_PCRTC_MAX_SCAN_LINE_MAX_SCAN_LINE 4:0 - -#define NV_PCRTC_CURSOR_START 0x0A -#define NV_PCRTC_CURSOR_END 0x0B -#define NV_PCRTC_START_ADDR_HIGH 0x0C -#define NV_PCRTC_START_ADDR_LOW 0x0D -#define NV_PCRTC_CURSOR_LOCATION_HIGH 0x0E -#define NV_PCRTC_CURSOR_LOCATION_LOW 0x0F - -#define NV_PCRTC_VERT_RETRACE_START 0x10 -#define NV_PCRTC_VERT_RETRACE_END 0x11 -#define NV_PCRTC_VERT_DISPLAY_END 0x12 -#define NV_PCRTC_OFFSET 0x13 -#define NV_PCRTC_UNDERLINE_LOCATION 0x14 -#define NV_PCRTC_VERT_BLANK_START 0x15 -#define NV_PCRTC_VERT_BLANK_END 0x16 -#define NV_PCRTC_MODE_CONTROL 0x17 -#define NV_PCRTC_LINE_COMPARE 0x18 - -/* Extended offset and start address */ -#define NV_PCRTC_REPAINT0 0x19 -#define NV_PCRTC_REPAINT0_OFFSET_10_8 7:5 -#define NV_PCRTC_REPAINT0_START_ADDR_20_16 4:0 - -/* Horizonal extended bits */ -#define NV_PCRTC_HORIZ_EXTRA 0x2d -#define NV_PCRTC_HORIZ_EXTRA_INTER_HALF_START_8 4:4 -#define NV_PCRTC_HORIZ_EXTRA_HORIZ_RETRACE_START_8 3:3 -#define NV_PCRTC_HORIZ_EXTRA_HORIZ_BLANK_START_8 2:2 -#define NV_PCRTC_HORIZ_EXTRA_DISPLAY_END_8 1:1 -#define NV_PCRTC_HORIZ_EXTRA_DISPLAY_TOTAL_8 0:0 - -/* Assorted extra bits */ -#define NV_PCRTC_EXTRA 0x25 -#define NV_PCRTC_EXTRA_OFFSET_11 5:5 -#define NV_PCRTC_EXTRA_HORIZ_BLANK_END_6 4:4 -#define NV_PCRTC_EXTRA_VERT_BLANK_START_10 3:3 -#define NV_PCRTC_EXTRA_VERT_RETRACE_START_10 2:2 -#define NV_PCRTC_EXTRA_VERT_DISPLAY_END_10 1:1 -#define NV_PCRTC_EXTRA_VERT_TOTAL_10 0:0 - -/* Controls how much data the refresh fifo requests */ -#define NV_PCRTC_FIFO_CONTROL 0x1b -#define NV_PCRTC_FIFO_CONTROL_UNDERFLOW_WARN 7:7 -#define NV_PCRTC_FIFO_CONTROL_BURST_LENGTH 2:0 -#define NV_PCRTC_FIFO_CONTROL_BURST_LENGTH_8 0x0 -#define NV_PCRTC_FIFO_CONTROL_BURST_LENGTH_32 0x1 -#define NV_PCRTC_FIFO_CONTROL_BURST_LENGTH_64 0x2 -#define NV_PCRTC_FIFO_CONTROL_BURST_LENGTH_128 0x3 -#define NV_PCRTC_FIFO_CONTROL_BURST_LENGTH_256 0x4 - -/* When the fifo occupancy falls below *twice* the watermark, - * the refresh fifo will start to be refilled. If this value is - * too low, you will get junk on the screen. Too high, and performance - * will suffer. Watermark in units of 8 bytes - */ -#define NV_PCRTC_FIFO 0x20 -#define NV_PCRTC_FIFO_RESET 7:7 -#define NV_PCRTC_FIFO_WATERMARK 5:0 - -/* Various flags */ -#define NV_PCRTC_REPAINT1 0x1a -#define NV_PCRTC_REPAINT1_HSYNC 7:7 -#define NV_PCRTC_REPAINT1_HYSNC_DISABLE 0x01 -#define NV_PCRTC_REPAINT1_HYSNC_ENABLE 0x00 -#define NV_PCRTC_REPAINT1_VSYNC 6:6 -#define NV_PCRTC_REPAINT1_VYSNC_DISABLE 0x01 -#define NV_PCRTC_REPAINT1_VYSNC_ENABLE 0x00 -#define NV_PCRTC_REPAINT1_COMPATIBLE_TEXT 4:4 -#define NV_PCRTC_REPAINT1_COMPATIBLE_TEXT_ENABLE 0x01 -#define NV_PCRTC_REPAINT1_COMPATIBLE_TEXT_DISABLE 0x00 -#define NV_PCRTC_REPAINT1_LARGE_SCREEN 2:2 -#define NV_PCRTC_REPAINT1_LARGE_SCREEN_DISABLE 0x01 -#define NV_PCRTC_REPAINT1_LARGE_SCREEN_ENABLE 0x00 /* >=1280 */ -#define NV_PCRTC_REPAINT1_PALETTE_WIDTH 1:1 -#define NV_PCRTC_REPAINT1_PALETTE_WIDTH_8BITS 0x00 -#define NV_PCRTC_REPAINT1_PALETTE_WIDTH_6BITS 0x01 - -#define NV_PCRTC_GRCURSOR0 0x30 -#define NV_PCRTC_GRCURSOR0_START_ADDR_21_16 5:0 - -#define NV_PCRTC_GRCURSOR1 0x31 -#define NV_PCRTC_GRCURSOR1_START_ADDR_15_11 7:3 -#define NV_PCRTC_GRCURSOR1_SCAN_DBL 1:1 -#define NV_PCRTC_GRCURSOR1_SCAN_DBL_DISABLE 0 -#define NV_PCRTC_GRCURSOR1_SCAN_DBL_ENABLE 1 -#define NV_PCRTC_GRCURSOR1_CURSOR 0:0 -#define NV_PCRTC_GRCURSOR1_CURSOR_DISABLE 0 -#define NV_PCRTC_GRCURSOR1_CURSOR_ENABLE 1 - -/* Controls what the format of the framebuffer is */ -#define NV_PCRTC_PIXEL 0x28 -#define NV_PCRTC_PIXEL_MODE 7:7 -#define NV_PCRTC_PIXEL_MODE_TV 0x01 -#define NV_PCRTC_PIXEL_MODE_VGA 0x00 -#define NV_PCRTC_PIXEL_TV_MODE 6:6 -#define NV_PCRTC_PIXEL_TV_MODE_NTSC 0x00 -#define NV_PCRTC_PIXEL_TV_MODE_PAL 0x01 -#define NV_PCRTC_PIXEL_TV_HORIZ_ADJUST 5:3 -#define NV_PCRTC_PIXEL_FORMAT 1:0 -#define NV_PCRTC_PIXEL_FORMAT_VGA 0x00 -#define NV_PCRTC_PIXEL_FORMAT_8BPP 0x01 -#define NV_PCRTC_PIXEL_FORMAT_16BPP 0x02 -#define NV_PCRTC_PIXEL_FORMAT_32BPP 0x03 - -/* RAMDAC registers and fields */ -#define NV_PRAMDAC 0x00680FFF:0x00680000 /* RW--D */ -#define NV_PRAMDAC_GRCURSOR_START_POS 0x00680300 /* RW-4R */ -#define NV_PRAMDAC_GRCURSOR_START_POS_X 11:0 /* RWXSF */ -#define NV_PRAMDAC_GRCURSOR_START_POS_Y 27:16 /* RWXSF */ -#define NV_PRAMDAC_NVPLL_COEFF 0x00680500 /* RW-4R */ -#define NV_PRAMDAC_NVPLL_COEFF_MDIV 7:0 /* RWIUF */ -#define NV_PRAMDAC_NVPLL_COEFF_NDIV 15:8 /* RWIUF */ -#define NV_PRAMDAC_NVPLL_COEFF_PDIV 18:16 /* RWIVF */ -#define NV_PRAMDAC_MPLL_COEFF 0x00680504 /* RW-4R */ -#define NV_PRAMDAC_MPLL_COEFF_MDIV 7:0 /* RWIUF */ -#define NV_PRAMDAC_MPLL_COEFF_NDIV 15:8 /* RWIUF */ -#define NV_PRAMDAC_MPLL_COEFF_PDIV 18:16 /* RWIVF */ -#define NV_PRAMDAC_VPLL_COEFF 0x00680508 /* RW-4R */ -#define NV_PRAMDAC_VPLL_COEFF_MDIV 7:0 /* RWIUF */ -#define NV_PRAMDAC_VPLL_COEFF_NDIV 15:8 /* RWIUF */ -#define NV_PRAMDAC_VPLL_COEFF_PDIV 18:16 /* RWIVF */ -#define NV_PRAMDAC_PLL_COEFF_SELECT 0x0068050C /* RW-4R */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_DLL_BYPASS 4:4 /* RWIVF */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_DLL_BYPASS_FALSE 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_DLL_BYPASS_TRUE 0x00000001 /* RW--V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_MPLL_SOURCE 8:8 /* RWIVF */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_MPLL_SOURCE_DEFAULT 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_MPLL_SOURCE_PROG 0x00000001 /* RW--V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_MPLL_BYPASS 12:12 /* RWIVF */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_MPLL_BYPASS_FALSE 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_MPLL_BYPASS_TRUE 0x00000001 /* RW--V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_VPLL_SOURCE 16:16 /* RWIVF */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_VPLL_SOURCE_DEFAULT 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_VPLL_SOURCE_PROG 0x00000001 /* RW--V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_VPLL_BYPASS 20:20 /* RWIVF */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_VPLL_BYPASS_FALSE 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_VPLL_BYPASS_TRUE 0x00000001 /* RW--V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_PCLK_SOURCE 25:24 /* RWIVF */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_PCLK_SOURCE_VPLL 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_PCLK_SOURCE_VIP 0x00000001 /* RW--V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_PCLK_SOURCE_XTALOSC 0x00000002 /* RW--V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_VCLK_RATIO 28:28 /* RWIVF */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_VCLK_RATIO_DB1 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_PLL_COEFF_SELECT_VCLK_RATIO_DB2 0x00000001 /* RW--V */ -#define NV_PRAMDAC_GENERAL_CONTROL 0x00680600 /* RW-4R */ -#define NV_PRAMDAC_GENERAL_CONTROL_FF_COEFF 1:0 /* RWIVF */ -#define NV_PRAMDAC_GENERAL_CONTROL_FF_COEFF_DEF 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_GENERAL_CONTROL_IDC_MODE 4:4 /* RWIVF */ -#define NV_PRAMDAC_GENERAL_CONTROL_IDC_MODE_GAMMA 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_GENERAL_CONTROL_IDC_MODE_INDEX 0x00000001 /* RW--V */ -#define NV_PRAMDAC_GENERAL_CONTROL_VGA_STATE 8:8 /* RWIVF */ -#define NV_PRAMDAC_GENERAL_CONTROL_VGA_STATE_NOTSE 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_GENERAL_CONTROL_VGA_STATE_SEL 0x00000001 /* RW--V */ -#define NV_PRAMDAC_GENERAL_CONTROL_565_MODE 12:12 /* RWIVF */ -#define NV_PRAMDAC_GENERAL_CONTROL_565_MODE_NOTSEL 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_GENERAL_CONTROL_565_MODE_SEL 0x00000001 /* RW--V */ -#define NV_PRAMDAC_GENERAL_CONTROL_BLK_PEDSTL 16:16 /* RWIVF */ -#define NV_PRAMDAC_GENERAL_CONTROL_BLK_PEDSTL_OFF 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_GENERAL_CONTROL_BLK_PEDSTL_ON 0x00000001 /* RW--V */ -#define NV_PRAMDAC_GENERAL_CONTROL_TERMINATION 17:17 /* RWIVF */ -#define NV_PRAMDAC_GENERAL_CONTROL_TERMINATION_37OHM 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_GENERAL_CONTROL_TERMINATION_75OHM 0x00000001 /* RW--V */ -#define NV_PRAMDAC_GENERAL_CONTROL_BPC 20:20 /* RWIVF */ -#define NV_PRAMDAC_GENERAL_CONTROL_BPC_6BITS 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_GENERAL_CONTROL_BPC_8BITS 0x00000001 /* RW--V */ -#define NV_PRAMDAC_GENERAL_CONTROL_DAC_SLEEP 24:24 /* RWIVF */ -#define NV_PRAMDAC_GENERAL_CONTROL_DAC_SLEEP_DIS 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_GENERAL_CONTROL_DAC_SLEEP_EN 0x00000001 /* RW--V */ -#define NV_PRAMDAC_GENERAL_CONTROL_PALETTE_CLK 28:28 /* RWIVF */ -#define NV_PRAMDAC_GENERAL_CONTROL_PALETTE_CLK_EN 0x00000000 /* RWI-V */ -#define NV_PRAMDAC_GENERAL_CONTROL_PALETTE_CLK_DIS 0x00000001 /* RW--V */ - -/* Master Control */ -#define NV_PMC 0x00000FFF:0x00000000 /* RW--D */ -#define NV_PMC_BOOT_0 0x00000000 /* R--4R */ -#define NV_PMC_BOOT_0_MINOR_REVISION 3:0 /* C--VF */ -#define NV_PMC_BOOT_0_MINOR_REVISION_0 0x00000000 /* C---V */ -#define NV_PMC_BOOT_0_MAJOR_REVISION 7:4 /* C--VF */ -#define NV_PMC_BOOT_0_MAJOR_REVISION_A 0x00000000 /* C---V */ -#define NV_PMC_BOOT_0_MAJOR_REVISION_B 0x00000001 /* ----V */ -#define NV_PMC_BOOT_0_IMPLEMENTATION 11:8 /* C--VF */ -#define NV_PMC_BOOT_0_IMPLEMENTATION_NV4_0 0x00000000 /* C---V */ -#define NV_PMC_BOOT_0_ARCHITECTURE 15:12 /* C--VF */ -#define NV_PMC_BOOT_0_ARCHITECTURE_NV0 0x00000000 /* ----V */ -#define NV_PMC_BOOT_0_ARCHITECTURE_NV1 0x00000001 /* ----V */ -#define NV_PMC_BOOT_0_ARCHITECTURE_NV2 0x00000002 /* ----V */ -#define NV_PMC_BOOT_0_ARCHITECTURE_NV3 0x00000003 /* ----V */ -#define NV_PMC_BOOT_0_ARCHITECTURE_NV4 0x00000004 /* C---V */ -#define NV_PMC_BOOT_0_FIB_REVISION 19:16 /* C--VF */ -#define NV_PMC_BOOT_0_FIB_REVISION_0 0x00000000 /* C---V */ -#define NV_PMC_BOOT_0_MASK_REVISION 23:20 /* C--VF */ -#define NV_PMC_BOOT_0_MASK_REVISION_A 0x00000000 /* C---V */ -#define NV_PMC_BOOT_0_MASK_REVISION_B 0x00000001 /* ----V */ -#define NV_PMC_BOOT_0_MANUFACTURER 27:24 /* C--UF */ -#define NV_PMC_BOOT_0_MANUFACTURER_NVIDIA 0x00000000 /* C---V */ -#define NV_PMC_BOOT_0_FOUNDRY 31:28 /* C--VF */ -#define NV_PMC_BOOT_0_FOUNDRY_SGS 0x00000000 /* ----V */ -#define NV_PMC_BOOT_0_FOUNDRY_HELIOS 0x00000001 /* ----V */ -#define NV_PMC_BOOT_0_FOUNDRY_TSMC 0x00000002 /* C---V */ -#define NV_PMC_INTR_0 0x00000100 /* RW-4R */ -#define NV_PMC_INTR_0_PMEDIA 4:4 /* R--VF */ -#define NV_PMC_INTR_0_PMEDIA_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PMC_INTR_0_PMEDIA_PENDING 0x00000001 /* R---V */ -#define NV_PMC_INTR_0_PFIFO 8:8 /* R--VF */ -#define NV_PMC_INTR_0_PFIFO_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PMC_INTR_0_PFIFO_PENDING 0x00000001 /* R---V */ -#define NV_PMC_INTR_0_PGRAPH 12:12 /* R--VF */ -#define NV_PMC_INTR_0_PGRAPH_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PMC_INTR_0_PGRAPH_PENDING 0x00000001 /* R---V */ -#define NV_PMC_INTR_0_PVIDEO 16:16 /* R--VF */ -#define NV_PMC_INTR_0_PVIDEO_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PMC_INTR_0_PVIDEO_PENDING 0x00000001 /* R---V */ -#define NV_PMC_INTR_0_PTIMER 20:20 /* R--VF */ -#define NV_PMC_INTR_0_PTIMER_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PMC_INTR_0_PTIMER_PENDING 0x00000001 /* R---V */ -#define NV_PMC_INTR_0_PCRTC 24:24 /* R--VF */ -#define NV_PMC_INTR_0_PCRTC_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PMC_INTR_0_PCRTC_PENDING 0x00000001 /* R---V */ -#define NV_PMC_INTR_0_PBUS 28:28 /* R--VF */ -#define NV_PMC_INTR_0_PBUS_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PMC_INTR_0_PBUS_PENDING 0x00000001 /* R---V */ -#define NV_PMC_INTR_0_SOFTWARE 31:31 /* RWIVF */ -#define NV_PMC_INTR_0_SOFTWARE_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PMC_INTR_0_SOFTWARE_PENDING 0x00000001 /* RW--V */ -#define NV_PMC_INTR_EN_0 0x00000140 /* RW-4R */ -#define NV_PMC_INTR_EN_0_INTA 1:0 /* RWIVF */ -#define NV_PMC_INTR_EN_0_INTA_DISABLED 0x00000000 /* RWI-V */ -#define NV_PMC_INTR_EN_0_INTA_HARDWARE 0x00000001 /* RW--V */ -#define NV_PMC_INTR_EN_0_INTA_SOFTWARE 0x00000002 /* RW--V */ -#define NV_PMC_INTR_READ_0 0x00000160 /* R--4R */ -#define NV_PMC_INTR_READ_0_INTA 0:0 /* R--VF */ -#define NV_PMC_INTR_READ_0_INTA_LOW 0x00000000 /* R---V */ -#define NV_PMC_INTR_READ_0_INTA_HIGH 0x00000001 /* R---V */ -#define NV_PMC_ENABLE 0x00000200 /* RW-4R */ -#define NV_PMC_ENABLE_PMEDIA 4:4 /* RWIVF */ -#define NV_PMC_ENABLE_PMEDIA_DISABLED 0x00000000 /* RWI-V */ -#define NV_PMC_ENABLE_PMEDIA_ENABLED 0x00000001 /* RW--V */ -#define NV_PMC_ENABLE_PFIFO 8:8 /* RWIVF */ -#define NV_PMC_ENABLE_PFIFO_DISABLED 0x00000000 /* RWI-V */ -#define NV_PMC_ENABLE_PFIFO_ENABLED 0x00000001 /* RW--V */ -#define NV_PMC_ENABLE_PGRAPH 12:12 /* RWIVF */ -#define NV_PMC_ENABLE_PGRAPH_DISABLED 0x00000000 /* RWI-V */ -#define NV_PMC_ENABLE_PGRAPH_ENABLED 0x00000001 /* RW--V */ -#define NV_PMC_ENABLE_PPMI 16:16 /* RWIVF */ -#define NV_PMC_ENABLE_PPMI_DISABLED 0x00000000 /* RWI-V */ -#define NV_PMC_ENABLE_PPMI_ENABLED 0x00000001 /* RW--V */ -#define NV_PMC_ENABLE_PFB 20:20 /* RWIVF */ -#define NV_PMC_ENABLE_PFB_DISABLED 0x00000000 /* RW--V */ -#define NV_PMC_ENABLE_PFB_ENABLED 0x00000001 /* RWI-V */ -#define NV_PMC_ENABLE_PCRTC 24:24 /* RWIVF */ -#define NV_PMC_ENABLE_PCRTC_DISABLED 0x00000000 /* RW--V */ -#define NV_PMC_ENABLE_PCRTC_ENABLED 0x00000001 /* RWI-V */ -#define NV_PMC_ENABLE_PVIDEO 28:28 /* RWIVF */ -#define NV_PMC_ENABLE_PVIDEO_DISABLED 0x00000000 /* RWI-V */ -#define NV_PMC_ENABLE_PVIDEO_ENABLED 0x00000001 /* RW--V */ - -/* dev_timer.ref */ -#define NV_PTIMER 0x00009FFF:0x00009000 /* RW--D */ -#define NV_PTIMER_INTR_0 0x00009100 /* RW-4R */ -#define NV_PTIMER_INTR_0_ALARM 0:0 /* RWXVF */ -#define NV_PTIMER_INTR_0_ALARM_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PTIMER_INTR_0_ALARM_PENDING 0x00000001 /* R---V */ -#define NV_PTIMER_INTR_0_ALARM_RESET 0x00000001 /* -W--V */ -#define NV_PTIMER_INTR_EN_0 0x00009140 /* RW-4R */ -#define NV_PTIMER_INTR_EN_0_ALARM 0:0 /* RWIVF */ -#define NV_PTIMER_INTR_EN_0_ALARM_DISABLED 0x00000000 /* RWI-V */ -#define NV_PTIMER_INTR_EN_0_ALARM_ENABLED 0x00000001 /* RW--V */ -#define NV_PTIMER_NUMERATOR 0x00009200 /* RW-4R */ -#define NV_PTIMER_NUMERATOR_VALUE 15:0 /* RWIUF */ -#define NV_PTIMER_NUMERATOR_VALUE_0 0x00000000 /* RWI-V */ -#define NV_PTIMER_DENOMINATOR 0x00009210 /* RW-4R */ -#define NV_PTIMER_DENOMINATOR_VALUE 15:0 /* RWIUF */ -#define NV_PTIMER_DENOMINATOR_VALUE_0 0x00000000 /* RWI-V */ -#define NV_PTIMER_TIME_0 0x00009400 /* RW-4R */ -#define NV_PTIMER_TIME_0_NSEC 31:5 /* RWXUF */ -#define NV_PTIMER_TIME_1 0x00009410 /* RW-4R */ -#define NV_PTIMER_TIME_1_NSEC 28:0 /* RWXUF */ -#define NV_PTIMER_ALARM_0 0x00009420 /* RW-4R */ -#define NV_PTIMER_ALARM_0_NSEC 31:5 /* RWXUF */ - -/* dev_fifo.ref */ -#define NV_PFIFO 0x00003FFF:0x00002000 /* RW--D */ -#define NV_PFIFO_DELAY_0 0x00002040 /* RW-4R */ -#define NV_PFIFO_DELAY_0_WAIT_RETRY 9:0 /* RWIUF */ -#define NV_PFIFO_DELAY_0_WAIT_RETRY_0 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_TIMESLICE 0x00002044 /* RW-4R */ -#define NV_PFIFO_DMA_TIMESLICE_SELECT 16:0 /* RWIUF */ -#define NV_PFIFO_DMA_TIMESLICE_SELECT_1 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_TIMESLICE_SELECT_16K 0x00003fff /* RW--V */ -#define NV_PFIFO_DMA_TIMESLICE_SELECT_32K 0x00007fff /* RW--V */ -#define NV_PFIFO_DMA_TIMESLICE_SELECT_64K 0x0000ffff /* RW--V */ -#define NV_PFIFO_DMA_TIMESLICE_SELECT_128K 0x0001ffff /* RW--V */ -#define NV_PFIFO_DMA_TIMESLICE_TIMEOUT 24:24 /* RWIUF */ -#define NV_PFIFO_DMA_TIMESLICE_TIMEOUT_DISABLED 0x00000000 /* RW--V */ -#define NV_PFIFO_DMA_TIMESLICE_TIMEOUT_ENABLED 0x00000001 /* RWI-V */ -#define NV_PFIFO_PIO_TIMESLICE 0x00002048 /* RW-4R */ -#define NV_PFIFO_PIO_TIMESLICE_SELECT 16:0 /* RWIUF */ -#define NV_PFIFO_PIO_TIMESLICE_SELECT_1 0x00000000 /* RWI-V */ -#define NV_PFIFO_PIO_TIMESLICE_SELECT_16K 0x00003fff /* RW--V */ -#define NV_PFIFO_PIO_TIMESLICE_SELECT_32K 0x00007fff /* RW--V */ -#define NV_PFIFO_PIO_TIMESLICE_SELECT_64K 0x0000ffff /* RW--V */ -#define NV_PFIFO_PIO_TIMESLICE_SELECT_128K 0x0001ffff /* RW--V */ -#define NV_PFIFO_PIO_TIMESLICE_TIMEOUT 24:24 /* RWIUF */ -#define NV_PFIFO_PIO_TIMESLICE_TIMEOUT_DISABLED 0x00000000 /* RW--V */ -#define NV_PFIFO_PIO_TIMESLICE_TIMEOUT_ENABLED 0x00000001 /* RWI-V */ -#define NV_PFIFO_TIMESLICE 0x0000204C /* RW-4R */ -#define NV_PFIFO_TIMESLICE_TIMER 17:0 /* RWIUF */ -#define NV_PFIFO_TIMESLICE_TIMER_EXPIRED 0x0003FFFF /* RWI-V */ -#define NV_PFIFO_NEXT_CHANNEL 0x00002050 /* RW-4R */ -#define NV_PFIFO_NEXT_CHANNEL_CHID 3:0 /* RWXUF */ -#define NV_PFIFO_NEXT_CHANNEL_MODE 8:8 /* RWXVF */ -#define NV_PFIFO_NEXT_CHANNEL_MODE_PIO 0x00000000 /* RW--V */ -#define NV_PFIFO_NEXT_CHANNEL_MODE_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_NEXT_CHANNEL_SWITCH 12:12 /* RWIVF */ -#define NV_PFIFO_NEXT_CHANNEL_SWITCH_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_NEXT_CHANNEL_SWITCH_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DEBUG_0 0x00002080 /* R--4R */ -#define NV_PFIFO_DEBUG_0_CACHE_ERROR0 0:0 /* R-XVF */ -#define NV_PFIFO_DEBUG_0_CACHE_ERROR0_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PFIFO_DEBUG_0_CACHE_ERROR0_PENDING 0x00000001 /* R---V */ -#define NV_PFIFO_DEBUG_0_CACHE_ERROR1 4:4 /* R-XVF */ -#define NV_PFIFO_DEBUG_0_CACHE_ERROR1_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PFIFO_DEBUG_0_CACHE_ERROR1_PENDING 0x00000001 /* R---V */ -#define NV_PFIFO_INTR_0 0x00002100 /* RW-4R */ -#define NV_PFIFO_INTR_0_CACHE_ERROR 0:0 /* RWXVF */ -#define NV_PFIFO_INTR_0_CACHE_ERROR_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PFIFO_INTR_0_CACHE_ERROR_PENDING 0x00000001 /* R---V */ -#define NV_PFIFO_INTR_0_CACHE_ERROR_RESET 0x00000001 /* -W--V */ -#define NV_PFIFO_INTR_0_RUNOUT 4:4 /* RWXVF */ -#define NV_PFIFO_INTR_0_RUNOUT_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PFIFO_INTR_0_RUNOUT_PENDING 0x00000001 /* R---V */ -#define NV_PFIFO_INTR_0_RUNOUT_RESET 0x00000001 /* -W--V */ -#define NV_PFIFO_INTR_0_RUNOUT_OVERFLOW 8:8 /* RWXVF */ -#define NV_PFIFO_INTR_0_RUNOUT_OVERFLOW_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PFIFO_INTR_0_RUNOUT_OVERFLOW_PENDING 0x00000001 /* R---V */ -#define NV_PFIFO_INTR_0_RUNOUT_OVERFLOW_RESET 0x00000001 /* -W--V */ -#define NV_PFIFO_INTR_0_DMA_PUSHER 12:12 /* RWXVF */ -#define NV_PFIFO_INTR_0_DMA_PUSHER_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PFIFO_INTR_0_DMA_PUSHER_PENDING 0x00000001 /* R---V */ -#define NV_PFIFO_INTR_0_DMA_PUSHER_RESET 0x00000001 /* -W--V */ -#define NV_PFIFO_INTR_0_DMA_PT 16:16 /* RWXVF */ -#define NV_PFIFO_INTR_0_DMA_PT_NOT_PENDING 0x00000000 /* R---V */ -#define NV_PFIFO_INTR_0_DMA_PT_PENDING 0x00000001 /* R---V */ -#define NV_PFIFO_INTR_0_DMA_PT_RESET 0x00000001 /* -W--V */ -#define NV_PFIFO_INTR_EN_0 0x00002140 /* RW-4R */ -#define NV_PFIFO_INTR_EN_0_CACHE_ERROR 0:0 /* RWIVF */ -#define NV_PFIFO_INTR_EN_0_CACHE_ERROR_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_INTR_EN_0_CACHE_ERROR_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_INTR_EN_0_RUNOUT 4:4 /* RWIVF */ -#define NV_PFIFO_INTR_EN_0_RUNOUT_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_INTR_EN_0_RUNOUT_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_INTR_EN_0_RUNOUT_OVERFLOW 8:8 /* RWIVF */ -#define NV_PFIFO_INTR_EN_0_RUNOUT_OVERFLOW_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_INTR_EN_0_RUNOUT_OVERFLOW_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_INTR_EN_0_DMA_PUSHER 12:12 /* RWIVF */ -#define NV_PFIFO_INTR_EN_0_DMA_PUSHER_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_INTR_EN_0_DMA_PUSHER_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_INTR_EN_0_DMA_PT 16:16 /* RWIVF */ -#define NV_PFIFO_INTR_EN_0_DMA_PT_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_INTR_EN_0_DMA_PT_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_RAMHT 0x00002210 /* RW-4R */ -#define NV_PFIFO_RAMHT_BASE_ADDRESS 8:4 /* RWIUF */ -#define NV_PFIFO_RAMHT_BASE_ADDRESS_10000 0x00000010 /* RWI-V */ -#define NV_PFIFO_RAMHT_SIZE 17:16 /* RWIUF */ -#define NV_PFIFO_RAMHT_SIZE_4K 0x00000000 /* RWI-V */ -#define NV_PFIFO_RAMHT_SIZE_8K 0x00000001 /* RW--V */ -#define NV_PFIFO_RAMHT_SIZE_16K 0x00000002 /* RW--V */ -#define NV_PFIFO_RAMHT_SIZE_32K 0x00000003 /* RW--V */ -#define NV_PFIFO_RAMHT_SEARCH 25:24 /* RWIUF */ -#define NV_PFIFO_RAMHT_SEARCH_16 0x00000000 /* RWI-V */ -#define NV_PFIFO_RAMHT_SEARCH_32 0x00000001 /* RW--V */ -#define NV_PFIFO_RAMHT_SEARCH_64 0x00000002 /* RW--V */ -#define NV_PFIFO_RAMHT_SEARCH_128 0x00000003 /* RW--V */ -#define NV_PFIFO_RAMFC 0x00002214 /* RW-4R */ -#define NV_PFIFO_RAMFC_BASE_ADDRESS 8:1 /* RWIUF */ -#define NV_PFIFO_RAMFC_BASE_ADDRESS_11000 0x00000088 /* RWI-V */ -#define NV_PFIFO_RAMRO 0x00002218 /* RW-4R */ -#define NV_PFIFO_RAMRO_BASE_ADDRESS 8:1 /* RWIUF */ -#define NV_PFIFO_RAMRO_BASE_ADDRESS_11200 0x00000089 /* RWI-V */ -#define NV_PFIFO_RAMRO_BASE_ADDRESS_12000 0x00000090 /* RW--V */ -#define NV_PFIFO_RAMRO_SIZE 16:16 /* RWIVF */ -#define NV_PFIFO_RAMRO_SIZE_512 0x00000000 /* RWI-V */ -#define NV_PFIFO_RAMRO_SIZE_8K 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHES 0x00002500 /* RW-4R */ -#define NV_PFIFO_CACHES_REASSIGN 0:0 /* RWIVF */ -#define NV_PFIFO_CACHES_REASSIGN_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHES_REASSIGN_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHES_DMA_SUSPEND 4:4 /* R--VF */ -#define NV_PFIFO_CACHES_DMA_SUSPEND_IDLE 0x00000000 /* R---V */ -#define NV_PFIFO_CACHES_DMA_SUSPEND_BUSY 0x00000001 /* R---V */ -#define NV_PFIFO_MODE 0x00002504 /* RW-4R */ -#define NV_PFIFO_MODE_CHANNEL_0 0:0 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_0_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_0_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_1 1:1 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_1_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_1_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_2 2:2 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_2_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_2_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_3 3:3 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_3_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_3_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_4 4:4 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_4_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_4_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_5 5:5 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_5_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_5_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_6 6:6 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_6_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_6_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_7 7:7 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_7_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_7_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_8 8:8 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_8_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_8_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_9 9:9 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_9_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_9_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_10 10:10 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_10_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_10_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_11 11:11 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_11_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_11_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_12 12:12 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_12_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_12_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_13 13:13 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_13_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_13_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_14 14:14 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_14_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_14_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_MODE_CHANNEL_15 15:15 /* RWIVF */ -#define NV_PFIFO_MODE_CHANNEL_15_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_MODE_CHANNEL_15_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA 0x00002508 /* RW-4R */ -#define NV_PFIFO_DMA_CHANNEL_0 0:0 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_0_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_0_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_1 1:1 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_1_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_1_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_2 2:2 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_2_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_2_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_3 3:3 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_3_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_3_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_4 4:4 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_4_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_4_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_5 5:5 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_5_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_5_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_6 6:6 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_6_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_6_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_7 7:7 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_7_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_7_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_8 8:8 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_8_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_8_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_9 9:9 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_9_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_9_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_10 10:10 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_10_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_10_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_11 11:11 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_11_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_11_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_12 12:12 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_12_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_12_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_13 13:13 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_13_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_13_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_14 14:14 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_14_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_14_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_DMA_CHANNEL_15 15:15 /* RWIVF */ -#define NV_PFIFO_DMA_CHANNEL_15_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PFIFO_DMA_CHANNEL_15_PENDING 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE 0x0000250C /* RW-4R */ -#define NV_PFIFO_SIZE_CHANNEL_0 0:0 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_0_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_0_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_1 1:1 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_1_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_1_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_2 2:2 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_2_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_2_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_3 3:3 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_3_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_3_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_4 4:4 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_4_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_4_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_5 5:5 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_5_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_5_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_6 6:6 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_6_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_6_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_7 7:7 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_7_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_7_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_8 8:8 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_8_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_8_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_9 9:9 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_9_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_9_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_10 10:10 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_10_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_10_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_11 11:11 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_11_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_11_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_12 12:12 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_12_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_12_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_13 13:13 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_13_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_13_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_14 14:14 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_14_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_14_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_SIZE_CHANNEL_15 15:15 /* RWIVF */ -#define NV_PFIFO_SIZE_CHANNEL_15_124_BYTES 0x00000000 /* RWI-V */ -#define NV_PFIFO_SIZE_CHANNEL_15_512_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_PUSH0 0x00003000 /* RW-4R */ -#define NV_PFIFO_CACHE0_PUSH0_ACCESS 0:0 /* RWIVF */ -#define NV_PFIFO_CACHE0_PUSH0_ACCESS_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE0_PUSH0_ACCESS_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_PUSH0 0x00003200 /* RW-4R */ -#define NV_PFIFO_CACHE1_PUSH0_ACCESS 0:0 /* RWIVF */ -#define NV_PFIFO_CACHE1_PUSH0_ACCESS_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE1_PUSH0_ACCESS_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_PUSH1 0x00003004 /* RW-4R */ -#define NV_PFIFO_CACHE0_PUSH1_CHID 3:0 /* RWXUF */ -#define NV_PFIFO_CACHE1_PUSH1 0x00003204 /* RW-4R */ -#define NV_PFIFO_CACHE1_PUSH1_CHID 3:0 /* RWXUF */ -#define NV_PFIFO_CACHE1_PUSH1_MODE 8:8 /* RWIVF */ -#define NV_PFIFO_CACHE1_PUSH1_MODE_PIO 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE1_PUSH1_MODE_DMA 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_PUSH 0x00003220 /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_PUSH_ACCESS 0:0 /* RWIVF */ -#define NV_PFIFO_CACHE1_DMA_PUSH_ACCESS_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE1_DMA_PUSH_ACCESS_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_PUSH_STATE 4:4 /* R--VF */ -#define NV_PFIFO_CACHE1_DMA_PUSH_STATE_IDLE 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE1_DMA_PUSH_STATE_BUSY 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE1_DMA_PUSH_BUFFER 8:8 /* R--VF */ -#define NV_PFIFO_CACHE1_DMA_PUSH_BUFFER_NOT_EMPTY 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE1_DMA_PUSH_BUFFER_EMPTY 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE1_DMA_PUSH_STATUS 12:12 /* RWIVF */ -#define NV_PFIFO_CACHE1_DMA_PUSH_STATUS_RUNNING 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE1_DMA_PUSH_STATUS_SUSPENDED 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH 0x00003224 /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG 7:3 /* RWIUF */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_8_BYTES 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_16_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_24_BYTES 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_32_BYTES 0x00000003 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_40_BYTES 0x00000004 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_48_BYTES 0x00000005 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_56_BYTES 0x00000006 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_64_BYTES 0x00000007 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_72_BYTES 0x00000008 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_80_BYTES 0x00000009 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_88_BYTES 0x0000000A /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_96_BYTES 0x0000000B /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_104_BYTES 0x0000000C /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_112_BYTES 0x0000000D /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_120_BYTES 0x0000000E /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_128_BYTES 0x0000000F /* RWI-V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_136_BYTES 0x00000010 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_144_BYTES 0x00000011 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_152_BYTES 0x00000012 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_160_BYTES 0x00000013 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_168_BYTES 0x00000014 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_176_BYTES 0x00000015 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_184_BYTES 0x00000016 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_192_BYTES 0x00000017 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_200_BYTES 0x00000018 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_208_BYTES 0x00000019 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_216_BYTES 0x0000001A /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_224_BYTES 0x0000001B /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_232_BYTES 0x0000001C /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_240_BYTES 0x0000001D /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_248_BYTES 0x0000001E /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_TRIG_256_BYTES 0x0000001F /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_SIZE 15:13 /* RWIUF */ -#define NV_PFIFO_CACHE1_DMA_FETCH_SIZE_32_BYTES 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_SIZE_64_BYTES 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_SIZE_96_BYTES 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_SIZE_128_BYTES 0x00000003 /* RWI-V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_SIZE_160_BYTES 0x00000004 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_SIZE_192_BYTES 0x00000005 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_SIZE_224_BYTES 0x00000006 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_SIZE_256_BYTES 0x00000007 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS 19:16 /* RWIUF */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_0 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_1 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_2 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_3 0x00000003 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_4 0x00000004 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_5 0x00000005 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_6 0x00000006 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_7 0x00000007 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_8 0x00000008 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_9 0x00000009 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_10 0x0000000A /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_11 0x0000000B /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_12 0x0000000C /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_13 0x0000000D /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_14 0x0000000E /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_FETCH_MAX_REQS_15 0x0000000F /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_PUT 0x00003240 /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_PUT_OFFSET 28:2 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_GET 0x00003244 /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_GET_OFFSET 28:2 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_STATE 0x00003228 /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_STATE_METHOD 12:2 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_STATE_SUBCHANNEL 15:13 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_STATE_METHOD_COUNT 28:18 /* RWIUF */ -#define NV_PFIFO_CACHE1_DMA_STATE_METHOD_COUNT_0 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE1_DMA_STATE_ERROR 31:30 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_STATE_ERROR_NONE 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_STATE_ERROR_NON_CACHE 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_STATE_ERROR_RESERVED_CMD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_STATE_ERROR_PROTECTION 0x00000003 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_INSTANCE 0x0000322C /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_INSTANCE_ADDRESS 15:0 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_CTL 0x00003230 /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_CTL_ADJUST 11:2 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_CTL_PAGE_TABLE 12:12 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_CTL_PAGE_TABLE_NOT_PRESENT 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_CTL_PAGE_TABLE_PRESENT 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_CTL_PAGE_ENTRY 13:13 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_CTL_PAGE_ENTRY_NOT_LINEAR 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_CTL_PAGE_ENTRY_LINEAR 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_CTL_TARGET_NODE 17:16 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_CTL_TARGET_NODE_PCI 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_CTL_TARGET_NODE_AGP 0x00000003 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_CTL_AT_INFO 31:31 /* RWIUF */ -#define NV_PFIFO_CACHE1_DMA_CTL_AT_INFO_INVALID 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_CTL_AT_INFO_VALID 0x00000001 /* RWI-V */ -#define NV_PFIFO_CACHE1_DMA_LIMIT 0x00003234 /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_LIMIT_OFFSET 28:2 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_TLB_TAG 0x00003238 /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_TLB_TAG_ADDRESS 28:12 /* RWXUF */ -#define NV_PFIFO_CACHE1_DMA_TLB_TAG_STATE 0:0 /* RWIUF */ -#define NV_PFIFO_CACHE1_DMA_TLB_TAG_STATE_INVALID 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE1_DMA_TLB_TAG_STATE_VALID 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_DMA_TLB_PTE 0x0000323C /* RW-4R */ -#define NV_PFIFO_CACHE1_DMA_TLB_PTE_FRAME_ADDRESS 31:12 /* RWXUF */ -#define NV_PFIFO_CACHE0_PULL0 0x00003050 /* RW-4R */ -#define NV_PFIFO_CACHE0_PULL0_ACCESS 0:0 /* RWIVF */ -#define NV_PFIFO_CACHE0_PULL0_ACCESS_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE0_PULL0_ACCESS_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_PULL0_HASH 4:4 /* R-XVF */ -#define NV_PFIFO_CACHE0_PULL0_HASH_SUCCEEDED 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE0_PULL0_HASH_FAILED 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE0_PULL0_DEVICE 8:8 /* R-XVF */ -#define NV_PFIFO_CACHE0_PULL0_DEVICE_HARDWARE 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE0_PULL0_DEVICE_SOFTWARE 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE0_PULL0_HASH_STATE 12:12 /* R-XVF */ -#define NV_PFIFO_CACHE0_PULL0_HASH_STATE_IDLE 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE0_PULL0_HASH_STATE_BUSY 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE1_PULL0 0x00003250 /* RW-4R */ -#define NV_PFIFO_CACHE1_PULL0_ACCESS 0:0 /* RWIVF */ -#define NV_PFIFO_CACHE1_PULL0_ACCESS_DISABLED 0x00000000 /* RWI-V */ -#define NV_PFIFO_CACHE1_PULL0_ACCESS_ENABLED 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_PULL0_HASH 4:4 /* R-XVF */ -#define NV_PFIFO_CACHE1_PULL0_HASH_SUCCEEDED 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE1_PULL0_HASH_FAILED 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE1_PULL0_DEVICE 8:8 /* R-XVF */ -#define NV_PFIFO_CACHE1_PULL0_DEVICE_HARDWARE 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE1_PULL0_DEVICE_SOFTWARE 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE1_PULL0_HASH_STATE 12:12 /* R-XVF */ -#define NV_PFIFO_CACHE1_PULL0_HASH_STATE_IDLE 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE1_PULL0_HASH_STATE_BUSY 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE0_PULL1 0x00003054 /* RW-4R */ -#define NV_PFIFO_CACHE0_PULL1_ENGINE 1:0 /* RWXUF */ -#define NV_PFIFO_CACHE0_PULL1_ENGINE_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE0_PULL1_ENGINE_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_PULL1_ENGINE_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_PULL1 0x00003254 /* RW-4R */ -#define NV_PFIFO_CACHE1_PULL1_ENGINE 1:0 /* RWXUF */ -#define NV_PFIFO_CACHE1_PULL1_ENGINE_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_PULL1_ENGINE_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_PULL1_ENGINE_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE0_HASH 0x00003058 /* RW-4R */ -#define NV_PFIFO_CACHE0_HASH_INSTANCE 15:0 /* RWXUF */ -#define NV_PFIFO_CACHE0_HASH_VALID 16:16 /* RWXVF */ -#define NV_PFIFO_CACHE1_HASH 0x00003258 /* RW-4R */ -#define NV_PFIFO_CACHE1_HASH_INSTANCE 15:0 /* RWXUF */ -#define NV_PFIFO_CACHE1_HASH_VALID 16:16 /* RWXVF */ -#define NV_PFIFO_CACHE0_STATUS 0x00003014 /* R--4R */ -#define NV_PFIFO_CACHE0_STATUS_LOW_MARK 4:4 /* R--VF */ -#define NV_PFIFO_CACHE0_STATUS_LOW_MARK_NOT_EMPTY 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE0_STATUS_LOW_MARK_EMPTY 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE0_STATUS_HIGH_MARK 8:8 /* R--VF */ -#define NV_PFIFO_CACHE0_STATUS_HIGH_MARK_NOT_FULL 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE0_STATUS_HIGH_MARK_FULL 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE1_STATUS 0x00003214 /* R--4R */ -#define NV_PFIFO_CACHE1_STATUS_LOW_MARK 4:4 /* R--VF */ -#define NV_PFIFO_CACHE1_STATUS_LOW_MARK_NOT_EMPTY 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE1_STATUS_LOW_MARK_EMPTY 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE1_STATUS_HIGH_MARK 8:8 /* R--VF */ -#define NV_PFIFO_CACHE1_STATUS_HIGH_MARK_NOT_FULL 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE1_STATUS_HIGH_MARK_FULL 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE1_STATUS1 0x00003218 /* R--4R */ -#define NV_PFIFO_CACHE1_STATUS1_RANOUT 0:0 /* R-XVF */ -#define NV_PFIFO_CACHE1_STATUS1_RANOUT_FALSE 0x00000000 /* R---V */ -#define NV_PFIFO_CACHE1_STATUS1_RANOUT_TRUE 0x00000001 /* R---V */ -#define NV_PFIFO_CACHE0_PUT 0x00003010 /* RW-4R */ -#define NV_PFIFO_CACHE0_PUT_ADDRESS 2:2 /* RWXUF */ -#define NV_PFIFO_CACHE1_PUT 0x00003210 /* RW-4R */ -#define NV_PFIFO_CACHE1_PUT_ADDRESS 9:2 /* RWXUF */ -#define NV_PFIFO_CACHE0_GET 0x00003070 /* RW-4R */ -#define NV_PFIFO_CACHE0_GET_ADDRESS 2:2 /* RWXUF */ -#define NV_PFIFO_CACHE1_GET 0x00003270 /* RW-4R */ -#define NV_PFIFO_CACHE1_GET_ADDRESS 9:2 /* RWXUF */ -#define NV_PFIFO_CACHE0_ENGINE 0x00003080 /* RW-4R */ -#define NV_PFIFO_CACHE0_ENGINE_0 1:0 /* RWXUF */ -#define NV_PFIFO_CACHE0_ENGINE_0_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_0_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_0_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_1 5:4 /* RWXUF */ -#define NV_PFIFO_CACHE0_ENGINE_1_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_1_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_1_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_2 9:8 /* RWXUF */ -#define NV_PFIFO_CACHE0_ENGINE_2_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_2_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_2_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_3 13:12 /* RWXUF */ -#define NV_PFIFO_CACHE0_ENGINE_3_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_3_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_3_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_4 17:16 /* RWXUF */ -#define NV_PFIFO_CACHE0_ENGINE_4_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_4_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_4_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_5 21:20 /* RWXUF */ -#define NV_PFIFO_CACHE0_ENGINE_5_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_5_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_5_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_6 25:24 /* RWXUF */ -#define NV_PFIFO_CACHE0_ENGINE_6_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_6_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_6_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_7 29:28 /* RWXUF */ -#define NV_PFIFO_CACHE0_ENGINE_7_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_7_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE0_ENGINE_7_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE 0x00003280 /* RW-4R */ -#define NV_PFIFO_CACHE1_ENGINE_0 1:0 /* RWXUF */ -#define NV_PFIFO_CACHE1_ENGINE_0_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_0_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_0_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_1 5:4 /* RWXUF */ -#define NV_PFIFO_CACHE1_ENGINE_1_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_1_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_1_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_2 9:8 /* RWXUF */ -#define NV_PFIFO_CACHE1_ENGINE_2_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_2_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_2_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_3 13:12 /* RWXUF */ -#define NV_PFIFO_CACHE1_ENGINE_3_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_3_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_3_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_4 17:16 /* RWXUF */ -#define NV_PFIFO_CACHE1_ENGINE_4_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_4_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_4_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_5 21:20 /* RWXUF */ -#define NV_PFIFO_CACHE1_ENGINE_5_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_5_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_5_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_6 25:24 /* RWXUF */ -#define NV_PFIFO_CACHE1_ENGINE_6_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_6_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_6_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_7 29:28 /* RWXUF */ -#define NV_PFIFO_CACHE1_ENGINE_7_SW 0x00000000 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_7_GRAPHICS 0x00000001 /* RW--V */ -#define NV_PFIFO_CACHE1_ENGINE_7_DVD 0x00000002 /* RW--V */ -#define NV_PFIFO_CACHE0_METHOD(i) (0x00003100+(i)*8) /* RW-4A */ -#define NV_PFIFO_CACHE0_METHOD__SIZE_1 1 /* */ -#define NV_PFIFO_CACHE0_METHOD_ADDRESS 12:2 /* RWXUF */ -#define NV_PFIFO_CACHE0_METHOD_SUBCHANNEL 15:13 /* RWXUF */ -#define NV_PFIFO_CACHE1_METHOD(i) (0x00003800+(i)*8) /* RW-4A */ -#define NV_PFIFO_CACHE1_METHOD__SIZE_1 128 /* */ -#define NV_PFIFO_CACHE1_METHOD_ADDRESS 12:2 /* RWXUF */ -#define NV_PFIFO_CACHE1_METHOD_SUBCHANNEL 15:13 /* RWXUF */ -#define NV_PFIFO_CACHE1_METHOD_ALIAS(i) (0x00003C00+(i)*8) /* RW-4A */ -#define NV_PFIFO_CACHE1_METHOD_ALIAS__SIZE_1 128 /* */ -#define NV_PFIFO_CACHE0_DATA(i) (0x00003104+(i)*8) /* RW-4A */ -#define NV_PFIFO_CACHE0_DATA__SIZE_1 1 /* */ -#define NV_PFIFO_CACHE0_DATA_VALUE 31:0 /* RWXVF */ -#define NV_PFIFO_CACHE1_DATA(i) (0x00003804+(i)*8) /* RW-4A */ -#define NV_PFIFO_CACHE1_DATA__SIZE_1 128 /* */ -#define NV_PFIFO_CACHE1_DATA_VALUE 31:0 /* RWXVF */ -#define NV_PFIFO_CACHE1_DATA_ALIAS(i) (0x00003C04+(i)*8) /* RW-4A */ -#define NV_PFIFO_CACHE1_DATA_ALIAS__SIZE_1 128 /* */ -#define NV_PFIFO_DEVICE(i) (0x00002800+(i)*4) /* R--4A */ -#define NV_PFIFO_DEVICE__SIZE_1 128 /* */ -#define NV_PFIFO_DEVICE_CHID 3:0 /* R--UF */ -#define NV_PFIFO_DEVICE_SWITCH 24:24 /* R--VF */ -#define NV_PFIFO_DEVICE_SWITCH_UNAVAILABLE 0x00000000 /* R---V */ -#define NV_PFIFO_DEVICE_SWITCH_AVAILABLE 0x00000001 /* R---V */ -#define NV_PFIFO_RUNOUT_STATUS 0x00002400 /* R--4R */ -#define NV_PFIFO_RUNOUT_STATUS_RANOUT 0:0 /* R--VF */ -#define NV_PFIFO_RUNOUT_STATUS_RANOUT_FALSE 0x00000000 /* R---V */ -#define NV_PFIFO_RUNOUT_STATUS_RANOUT_TRUE 0x00000001 /* R---V */ -#define NV_PFIFO_RUNOUT_STATUS_LOW_MARK 4:4 /* R--VF */ -#define NV_PFIFO_RUNOUT_STATUS_LOW_MARK_NOT_EMPTY 0x00000000 /* R---V */ -#define NV_PFIFO_RUNOUT_STATUS_LOW_MARK_EMPTY 0x00000001 /* R---V */ -#define NV_PFIFO_RUNOUT_STATUS_HIGH_MARK 8:8 /* R--VF */ -#define NV_PFIFO_RUNOUT_STATUS_HIGH_MARK_NOT_FULL 0x00000000 /* R---V */ -#define NV_PFIFO_RUNOUT_STATUS_HIGH_MARK_FULL 0x00000001 /* R---V */ -#define NV_PFIFO_RUNOUT_PUT 0x00002410 /* RW-4R */ -#define NV_PFIFO_RUNOUT_PUT_ADDRESS 12:3 /* RWXUF */ -#define NV_PFIFO_RUNOUT_PUT_ADDRESS__SIZE_0 8:3 /* RWXUF */ -#define NV_PFIFO_RUNOUT_PUT_ADDRESS__SIZE_1 12:3 /* RWXUF */ -#define NV_PFIFO_RUNOUT_GET 0x00002420 /* RW-4R */ -#define NV_PFIFO_RUNOUT_GET_ADDRESS 13:3 /* RWXUF */ -/* dev_graphics.ref */ -#define NV_PGRAPH 0x00401FFF:0x00400000 /* RW--D */ -#define NV_PGRAPH_DEBUG_0 0x00400080 /* RW-4R */ -#define NV_PGRAPH_DEBUG_1 0x00400084 /* RW-4R */ -#define NV_PGRAPH_DEBUG_2 0x00400088 /* RW-4R */ -#define NV_PGRAPH_DEBUG_3 0x0040008C /* RW-4R */ -#define NV_PGRAPH_INTR 0x00400100 /* RW-4R */ -#define NV_PGRAPH_INTR_NOTIFY 0:0 /* RWIVF */ -#define NV_PGRAPH_INTR_NOTIFY_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_INTR_NOTIFY_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_INTR_NOTIFY_RESET 0x00000001 /* -W--C */ -#define NV_PGRAPH_INTR_MISSING_HW 4:4 /* RWIVF */ -#define NV_PGRAPH_INTR_MISSING_HW_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_INTR_MISSING_HW_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_INTR_MISSING_HW_RESET 0x00000001 /* -W--C */ -#define NV_PGRAPH_INTR_TLB_PRESENT_A 8:8 /* RWIVF */ -#define NV_PGRAPH_INTR_TLB_PRESENT_A_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_INTR_TLB_PRESENT_A_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_INTR_TLB_PRESENT_A_RESET 0x00000001 /* -W--C */ -#define NV_PGRAPH_INTR_TLB_PRESENT_B 9:9 /* RWIVF */ -#define NV_PGRAPH_INTR_TLB_PRESENT_B_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_INTR_TLB_PRESENT_B_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_INTR_TLB_PRESENT_B_RESET 0x00000001 /* -W--C */ -#define NV_PGRAPH_INTR_CONTEXT_SWITCH 12:12 /* RWIVF */ -#define NV_PGRAPH_INTR_CONTEXT_SWITCH_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_INTR_CONTEXT_SWITCH_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_INTR_CONTEXT_SWITCH_RESET 0x00000001 /* -W--C */ -#define NV_PGRAPH_INTR_BUFFER_NOTIFY 16:16 /* RWIVF */ -#define NV_PGRAPH_INTR_BUFFER_NOTIFY_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_INTR_BUFFER_NOTIFY_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_INTR_BUFFER_NOTIFY_RESET 0x00000001 /* -W--C */ -#define NV_PGRAPH_NSTATUS 0x00400104 /* RW-4R */ -#define NV_PGRAPH_NSTATUS_STATE_IN_USE 11:11 /* RWIVF */ -#define NV_PGRAPH_NSTATUS_STATE_IN_USE_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PGRAPH_NSTATUS_STATE_IN_USE_PENDING 0x00000001 /* RW--V */ -#define NV_PGRAPH_NSTATUS_INVALID_STATE 12:12 /* RWIVF */ -#define NV_PGRAPH_NSTATUS_INVALID_STATE_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PGRAPH_NSTATUS_INVALID_STATE_PENDING 0x00000001 /* RW--V */ -#define NV_PGRAPH_NSTATUS_BAD_ARGUMENT 13:13 /* RWIVF */ -#define NV_PGRAPH_NSTATUS_BAD_ARGUMENT_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PGRAPH_NSTATUS_BAD_ARGUMENT_PENDING 0x00000001 /* RW--V */ -#define NV_PGRAPH_NSTATUS_PROTECTION_FAULT 14:14 /* RWIVF */ -#define NV_PGRAPH_NSTATUS_PROTECTION_FAULT_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PGRAPH_NSTATUS_PROTECTION_FAULT_PENDING 0x00000001 /* RW--V */ -#define NV_PGRAPH_NSOURCE 0x00400108 /* R--4R */ -#define NV_PGRAPH_NSOURCE_NOTIFICATION 0:0 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_NOTIFICATION_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_NOTIFICATION_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_DATA_ERROR 1:1 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_DATA_ERROR_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_DATA_ERROR_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_PROTECTION_ERROR 2:2 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_PROTECTION_ERROR_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_PROTECTION_ERROR_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_RANGE_EXCEPTION 3:3 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_RANGE_EXCEPTION_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_RANGE_EXCEPTION_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_LIMIT_COLOR 4:4 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_LIMIT_COLOR_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_LIMIT_COLOR_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_LIMIT_ZETA_ 5:5 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_LIMIT_ZETA_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_LIMIT_ZETA_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_ILLEGAL_MTHD 6:6 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_ILLEGAL_MTHD_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_ILLEGAL_MTHD_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_DMA_R_PROTECTION 7:7 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_DMA_R_PROTECTION_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_DMA_R_PROTECTION_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_DMA_W_PROTECTION 8:8 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_DMA_W_PROTECTION_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_DMA_W_PROTECTION_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_FORMAT_EXCEPTION 9:9 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_FORMAT_EXCEPTION_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_FORMAT_EXCEPTION_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_PATCH_EXCEPTION 10:10 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_PATCH_EXCEPTION_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_PATCH_EXCEPTION_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_STATE_INVALID 11:11 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_STATE_INVALID_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_STATE_INVALID_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_DOUBLE_NOTIFY 12:12 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_DOUBLE_NOTIFY_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_DOUBLE_NOTIFY_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_NOTIFY_IN_USE 13:13 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_NOTIFY_IN_USE_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_NOTIFY_IN_USE_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_METHOD_CNT 14:14 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_METHOD_CNT_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_METHOD_CNT_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_NSOURCE_BFR_NOTIFICATION 15:15 /* R-IVF */ -#define NV_PGRAPH_NSOURCE_BFR_NOTIFICATION_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_NSOURCE_BFR_NOTIFICATION_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_INTR_EN 0x00400140 /* RW-4R */ -#define NV_PGRAPH_INTR_EN_NOTIFY 0:0 /* RWIVF */ -#define NV_PGRAPH_INTR_EN_NOTIFY_DISABLED 0x00000000 /* RWI-V */ -#define NV_PGRAPH_INTR_EN_NOTIFY_ENABLED 0x00000001 /* RW--V */ -#define NV_PGRAPH_INTR_EN_MISSING_HW 4:4 /* RWIVF */ -#define NV_PGRAPH_INTR_EN_MISSING_HW_DISABLED 0x00000000 /* RWI-V */ -#define NV_PGRAPH_INTR_EN_MISSING_HW_ENABLED 0x00000001 /* RW--V */ -#define NV_PGRAPH_INTR_EN_TLB_PRESENT_A 8:8 /* RWIVF */ -#define NV_PGRAPH_INTR_EN_TLB_PRESENT_A_DISABLED 0x00000000 /* RWI-V */ -#define NV_PGRAPH_INTR_EN_TLB_PRESENT_A_ENABLED 0x00000001 /* RW--V */ -#define NV_PGRAPH_INTR_EN_TLB_PRESENT_B 9:9 /* RWIVF */ -#define NV_PGRAPH_INTR_EN_TLB_PRESENT_B_DISABLED 0x00000000 /* RWI-V */ -#define NV_PGRAPH_INTR_EN_TLB_PRESENT_B_ENABLED 0x00000001 /* RW--V */ -#define NV_PGRAPH_INTR_EN_CONTEXT_SWITCH 12:12 /* RWIVF */ -#define NV_PGRAPH_INTR_EN_CONTEXT_SWITCH_DISABLED 0x00000000 /* RWI-V */ -#define NV_PGRAPH_INTR_EN_CONTEXT_SWITCH_ENABLED 0x00000001 /* RW--V */ -#define NV_PGRAPH_INTR_EN_BUFFER_NOTIFY 16:16 /* RWIVF */ -#define NV_PGRAPH_INTR_EN_BUFFER_NOTIFY_DISABLED 0x00000000 /* RWI-V */ -#define NV_PGRAPH_INTR_EN_BUFFER_NOTIFY_ENABLED 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1 0x00400160 /* RW-4R */ -#define NV_PGRAPH_CTX_SWITCH1_GRCLASS 7:0 /* RWXVF */ -#define NV_PGRAPH_CTX_SWITCH1_CHROMA_KEY 12:12 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH1_CHROMA_KEY_DISABLE 0x00000000 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_CHROMA_KEY_ENABLE 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_USER_CLIP 13:13 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH1_USER_CLIP_DISABLE 0x00000000 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_USER_CLIP_ENABLE 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_SWIZZLE 14:14 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH1_SWIZZLE_DISABLE 0x00000000 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_SWIZZLE_ENABLE 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_CONFIG 17:15 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_CONFIG_SRCCOPY_AND 0x00000000 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_CONFIG_ROP_AND 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_CONFIG_BLEND_AND 0x00000002 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_CONFIG_SRCCOPY 0x00000003 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_CONFIG_SRCCOPY_PRE 0x00000004 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_CONFIG_BLEND_PRE 0x00000005 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_STATUS 24:24 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_STATUS_INVALID 0x00000000 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_PATCH_STATUS_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_CONTEXT_SURFACE 25:25 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH1_CONTEXT_SURFACE_INVALID 0x00000000 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_CONTEXT_SURFACE_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH1_VOLATILE_RESET 31:31 /* CWIVF */ -#define NV_PGRAPH_CTX_SWITCH1_VOLATILE_RESET_IGNORE 0x00000000 /* CWI-V */ -#define NV_PGRAPH_CTX_SWITCH1_VOLATILE_RESET_ENABLED 0x00000001 /* -W--T */ -#define NV_PGRAPH_CTX_SWITCH2 0x00400164 /* RW-4R */ -#define NV_PGRAPH_CTX_SWITCH2_MONO_FORMAT 1:0 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH2_MONO_FORMAT_INVALID 0x00 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_MONO_FORMAT_CGA6_M1 0x01 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_MONO_FORMAT_LE_M1 0x02 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT 13:8 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_INVALID 0x00 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_Y8 0x01 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_X16A8Y8 0x02 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_X24Y8 0x03 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_A1R5G5B5 0x06 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_X1R5G5B5 0x07 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_X16A1R5G5B5 0x08 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_X17R5G5B5 0x09 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_R5G6B5 0x0A /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_A16R5G6B5 0x0B /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_X16R5G6B5 0x0C /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_A8R8G8B8 0x0D /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_X8R8G8B8 0x0E /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_Y16 0x0F /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_A16Y16 0x10 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_X16Y16 0x11 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_V8YB8U8YA8 0x12 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_YB8V8YA8U8 0x13 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_COLOR_FORMAT_LE_Y32 0x14 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH2_NOTIFY_INSTANCE 31:16 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH2_NOTIFY_INSTANCE_INVALID 0x0000 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH3 0x00400168 /* RW-4R */ -#define NV_PGRAPH_CTX_SWITCH3_DMA_INSTANCE_0 15:0 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH3_DMA_INSTANCE_0_INVALID 0x0000 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH3_DMA_INSTANCE_1 31:16 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH3_DMA_INSTANCE_1_INVALID 0x0000 /* RW--V */ -#define NV_PGRAPH_CTX_SWITCH4 0x0040016C /* RW-4R */ -#define NV_PGRAPH_CTX_SWITCH4_USER_INSTANCE 15:0 /* RWXUF */ -#define NV_PGRAPH_CTX_SWITCH4_USER_INSTANCE_INVALID 0x0000 /* RW--V */ -#define NV_PGRAPH_CTX_CACHE1(i) (0x00400180+(i)*4) /* RW-4A */ -#define NV_PGRAPH_CTX_CACHE1__SIZE_1 8 /* */ -#define NV_PGRAPH_CTX_CACHE1_GRCLASS 7:0 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE1_CHROMA_KEY 12:12 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE1_USER_CLIP 13:13 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE1_SWIZZLE 14:14 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE1_PATCH_CONFIG 19:15 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE1_SPARE1 20:20 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE1_PATCH_STATUS 24:24 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE1_CONTEXT_SURFACE 25:25 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE2(i) (0x004001a0+(i)*4) /* RW-4A */ -#define NV_PGRAPH_CTX_CACHE2__SIZE_1 8 /* */ -#define NV_PGRAPH_CTX_CACHE2_MONO_FORMAT 1:0 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE2_COLOR_FORMAT 13:8 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE2_NOTIFY_INSTANCE 31:16 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE3(i) (0x004001c0+(i)*4) /* RW-4A */ -#define NV_PGRAPH_CTX_CACHE3__SIZE_1 8 /* */ -#define NV_PGRAPH_CTX_CACHE3_DMA_INSTANCE_0 15:0 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE3_DMA_INSTANCE_1 31:16 /* RWXVF */ -#define NV_PGRAPH_CTX_CACHE4(i) (0x004001e0+(i)*4) /* RW-4A */ -#define NV_PGRAPH_CTX_CACHE4__SIZE_1 8 /* */ -#define NV_PGRAPH_CTX_CACHE4_USER_INSTANCE 15:0 /* RWXVF */ -#define NV_PGRAPH_CTX_CONTROL 0x00400170 /* RW-4R */ -#define NV_PGRAPH_CTX_CONTROL_MINIMUM_TIME 1:0 /* RWIVF */ -#define NV_PGRAPH_CTX_CONTROL_MINIMUM_TIME_33US 0x00000000 /* RWI-V */ -#define NV_PGRAPH_CTX_CONTROL_MINIMUM_TIME_262US 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_CONTROL_MINIMUM_TIME_2MS 0x00000002 /* RW--V */ -#define NV_PGRAPH_CTX_CONTROL_MINIMUM_TIME_17MS 0x00000003 /* RW--V */ -#define NV_PGRAPH_CTX_CONTROL_TIME 8:8 /* RWIVF */ -#define NV_PGRAPH_CTX_CONTROL_TIME_EXPIRED 0x00000000 /* RWI-V */ -#define NV_PGRAPH_CTX_CONTROL_TIME_NOT_EXPIRED 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_CONTROL_CHID 16:16 /* RWIVF */ -#define NV_PGRAPH_CTX_CONTROL_CHID_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_CTX_CONTROL_CHID_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_CONTROL_CHANGE 20:20 /* R--VF */ -#define NV_PGRAPH_CTX_CONTROL_CHANGE_UNAVAILABLE 0x00000000 /* R---V */ -#define NV_PGRAPH_CTX_CONTROL_CHANGE_AVAILABLE 0x00000001 /* R---V */ -#define NV_PGRAPH_CTX_CONTROL_SWITCHING 24:24 /* RWIVF */ -#define NV_PGRAPH_CTX_CONTROL_SWITCHING_IDLE 0x00000000 /* RWI-V */ -#define NV_PGRAPH_CTX_CONTROL_SWITCHING_BUSY 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_CONTROL_DEVICE 28:28 /* RWIVF */ -#define NV_PGRAPH_CTX_CONTROL_DEVICE_DISABLED 0x00000000 /* RWI-V */ -#define NV_PGRAPH_CTX_CONTROL_DEVICE_ENABLED 0x00000001 /* RW--V */ -#define NV_PGRAPH_CTX_USER 0x00400174 /* RW-4R */ -#define NV_PGRAPH_CTX_USER_SUBCH 15:13 /* RWIVF */ -#define NV_PGRAPH_CTX_USER_SUBCH_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_CTX_USER_CHID 27:24 /* RWIVF */ -#define NV_PGRAPH_CTX_USER_CHID_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_FIFO 0x00400720 /* RW-4R */ -#define NV_PGRAPH_FIFO_ACCESS 0:0 /* RWIVF */ -#define NV_PGRAPH_FIFO_ACCESS_DISABLED 0x00000000 /* RW--V */ -#define NV_PGRAPH_FIFO_ACCESS_ENABLED 0x00000001 /* RWI-V */ -#define NV_PGRAPH_FFINTFC_FIFO_0(i) (0x00400730+(i)*4) /* RW-4A */ -#define NV_PGRAPH_FFINTFC_FIFO_0__SIZE_1 4 /* */ -#define NV_PGRAPH_FFINTFC_FIFO_0_TAG 0:0 /* RWXVF */ -#define NV_PGRAPH_FFINTFC_FIFO_0_TAG_MTHD 0x00000000 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_TAG_CHSW 0x00000001 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_SUBCH 3:1 /* RWXVF */ -#define NV_PGRAPH_FFINTFC_FIFO_0_SUBCH_0 0x00000000 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_SUBCH_1 0x00000001 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_SUBCH_2 0x00000002 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_SUBCH_3 0x00000003 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_SUBCH_4 0x00000004 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_SUBCH_5 0x00000005 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_SUBCH_6 0x00000006 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_SUBCH_7 0x00000007 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_0_MTHD 14:4 /* RWXVF */ -#define NV_PGRAPH_FFINTFC_FIFO_0_MTHD_CTX_SWITCH 0x00000000 /* RW--V */ -#define NV_PGRAPH_FFINTFC_FIFO_1(i) (0x00400740+(i)*4) /* RW-4A */ -#define NV_PGRAPH_FFINTFC_FIFO_1__SIZE_1 4 /* */ -#define NV_PGRAPH_FFINTFC_FIFO_1_ARGUMENT 31:0 /* RWXVF */ -#define NV_PGRAPH_FFINTFC_FIFO_PTR 0x00400750 /* RW-4R */ -#define NV_PGRAPH_FFINTFC_FIFO_PTR_WRITE 2:0 /* RWIVF */ -#define NV_PGRAPH_FFINTFC_FIFO_PTR_WRITE_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_FFINTFC_FIFO_PTR_READ 6:4 /* RWIVF */ -#define NV_PGRAPH_FFINTFC_FIFO_PTR_READ_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_FFINTFC_ST2 0x00400754 /* RW-4R */ -#define NV_PGRAPH_FFINTFC_ST2_STATUS 0:0 /* RWIVF */ -#define NV_PGRAPH_FFINTFC_ST2_STATUS_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_FFINTFC_ST2_STATUS_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_MTHD 11:1 /* RWIVF */ -#define NV_PGRAPH_FFINTFC_ST2_MTHD_CTX_SWITCH 0x00000000 /* RWI-V */ -#define NV_PGRAPH_FFINTFC_ST2_SUBCH 14:12 /* RWIVF */ -#define NV_PGRAPH_FFINTFC_ST2_SUBCH_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_FFINTFC_ST2_SUBCH_1 0x00000001 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_SUBCH_2 0x00000002 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_SUBCH_3 0x00000003 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_SUBCH_4 0x00000004 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_SUBCH_5 0x00000005 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_SUBCH_6 0x00000006 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_SUBCH_7 0x00000007 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID 18:15 /* RWIVF */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_1 0x00000001 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_2 0x00000002 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_3 0x00000003 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_4 0x00000004 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_5 0x00000005 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_6 0x00000006 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_7 0x00000007 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_8 0x00000008 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_9 0x00000009 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_10 0x0000000A /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_11 0x0000000B /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_12 0x0000000C /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_13 0x0000000D /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_14 0x0000000E /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_15 0x0000000F /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_STATUS 19:19 /* RWIVF */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_STATUS_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_FFINTFC_ST2_CHID_STATUS_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_FFINTFC_ST2_D 0x00400758 /* RW-4R */ -#define NV_PGRAPH_FFINTFC_ST2_D_ARGUMENT 31:0 /* RWIVF */ -#define NV_PGRAPH_FFINTFC_ST2_D_ARGUMENT_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATUS 0x00400700 /* R--4R */ -#define NV_PGRAPH_STATUS_STATE 0:0 /* R-IVF */ -#define NV_PGRAPH_STATUS_STATE_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_STATE_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_XY_LOGIC 4:4 /* R-IVF */ -#define NV_PGRAPH_STATUS_XY_LOGIC_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_XY_LOGIC_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_FE 5:5 /* R-IVF */ -#define NV_PGRAPH_STATUS_FE_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_FE_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_RASTERIZER 6:6 /* R-IVF */ -#define NV_PGRAPH_STATUS_RASTERIZER_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_RASTERIZER_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_PORT_NOTIFY 8:8 /* R-IVF */ -#define NV_PGRAPH_STATUS_PORT_NOTIFY_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_PORT_NOTIFY_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_PORT_REGISTER 12:12 /* R-IVF */ -#define NV_PGRAPH_STATUS_PORT_REGISTER_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_PORT_REGISTER_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_PORT_DMA 16:16 /* R-IVF */ -#define NV_PGRAPH_STATUS_PORT_DMA_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_PORT_DMA_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_DMA_ENGINE 17:17 /* R-IVF */ -#define NV_PGRAPH_STATUS_DMA_ENGINE_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_DMA_ENGINE_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_DMA_NOTIFY 20:20 /* R-IVF */ -#define NV_PGRAPH_STATUS_DMA_NOTIFY_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_DMA_NOTIFY_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_DMA_BUFFER_NOTIFY 21:21 /* R-IVF */ -#define NV_PGRAPH_STATUS_DMA_BUFFER_NOTIFY_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_DMA_BUFFER_NOTIFY_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_D3D 24:24 /* R-IVF */ -#define NV_PGRAPH_STATUS_D3D_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_D3D_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_CACHE 25:25 /* R-IVF */ -#define NV_PGRAPH_STATUS_CACHE_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_CACHE_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_LIGHTING 26:26 /* R-IVF */ -#define NV_PGRAPH_STATUS_LIGHTING_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_LIGHTING_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_PREROP 27:27 /* R-IVF */ -#define NV_PGRAPH_STATUS_PREROP_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_PREROP_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_ROP 28:28 /* R-IVF */ -#define NV_PGRAPH_STATUS_ROP_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_ROP_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_STATUS_PORT_USER 29:29 /* R-IVF */ -#define NV_PGRAPH_STATUS_PORT_USER_IDLE 0x00000000 /* R-I-V */ -#define NV_PGRAPH_STATUS_PORT_USER_BUSY 0x00000001 /* R---V */ -#define NV_PGRAPH_TRAPPED_ADDR 0x00400704 /* R--4R */ -#define NV_PGRAPH_TRAPPED_ADDR_MTHD 12:2 /* R-XUF */ -#define NV_PGRAPH_TRAPPED_ADDR_SUBCH 15:13 /* R-XUF */ -#define NV_PGRAPH_TRAPPED_ADDR_CHID 27:24 /* R-XUF */ -#define NV_PGRAPH_TRAPPED_DATA 0x00400708 /* R--4R */ -#define NV_PGRAPH_TRAPPED_DATA_VALUE 31:0 /* R-XVF */ -#define NV_PGRAPH_SURFACE 0x0040070C /* RW-4R */ -#define NV_PGRAPH_SURFACE_TYPE 1:0 /* RWIVF */ -#define NV_PGRAPH_SURFACE_TYPE_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_SURFACE_TYPE_NON_SWIZZLE 0x00000001 /* RW--V */ -#define NV_PGRAPH_SURFACE_TYPE_SWIZZLE 0x00000002 /* RW--V */ -#define NV_PGRAPH_NOTIFY 0x00400714 /* RW-4R */ -#define NV_PGRAPH_NOTIFY_BUFFER_REQ 0:0 /* RWIVF */ -#define NV_PGRAPH_NOTIFY_BUFFER_REQ_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PGRAPH_NOTIFY_BUFFER_REQ_PENDING 0x00000001 /* RW--V */ -#define NV_PGRAPH_NOTIFY_BUFFER_STYLE 8:8 /* RWIVF */ -#define NV_PGRAPH_NOTIFY_BUFFER_STYLE_WRITE_ONLY 0x00000000 /* RWI-V */ -#define NV_PGRAPH_NOTIFY_BUFFER_STYLE_WRITE_THEN_AWAKEN 0x00000001 /* RW--V */ -#define NV_PGRAPH_NOTIFY_REQ 16:16 /* RWIVF */ -#define NV_PGRAPH_NOTIFY_REQ_NOT_PENDING 0x00000000 /* RWI-V */ -#define NV_PGRAPH_NOTIFY_REQ_PENDING 0x00000001 /* RW--V */ -#define NV_PGRAPH_NOTIFY_STYLE 20:20 /* RWIVF */ -#define NV_PGRAPH_NOTIFY_STYLE_WRITE_ONLY 0x00000000 /* RWI-V */ -#define NV_PGRAPH_NOTIFY_STYLE_WRITE_THEN_AWAKEN 0x00000001 /* RW--V */ -#define NV_PGRAPH_BOFFSET(i) (0x00400640+(i)*4) /* RW-4A */ -#define NV_PGRAPH_BOFFSET__SIZE_1 6 /* */ -#define NV_PGRAPH_BOFFSET_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BOFFSET_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BOFFSET0 0x00400640 /* RW-4R */ -#define NV_PGRAPH_BOFFSET0__ALIAS_1 NV_PGRAPH_BOFFSET(0) /* */ -#define NV_PGRAPH_BOFFSET0_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BOFFSET0_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BOFFSET1 0x00400644 /* RW-4R */ -#define NV_PGRAPH_BOFFSET1__ALIAS_1 NV_PGRAPH_BOFFSET(1) /* */ -#define NV_PGRAPH_BOFFSET1_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BOFFSET1_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BOFFSET2 0x00400648 /* RW-4R */ -#define NV_PGRAPH_BOFFSET2__ALIAS_1 NV_PGRAPH_BOFFSET(2) /* */ -#define NV_PGRAPH_BOFFSET2_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BOFFSET2_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BOFFSET3 0x0040064C /* RW-4R */ -#define NV_PGRAPH_BOFFSET3__ALIAS_1 NV_PGRAPH_BOFFSET(3) /* */ -#define NV_PGRAPH_BOFFSET3_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BOFFSET3_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BOFFSET4 0x00400650 /* RW-4R */ -#define NV_PGRAPH_BOFFSET4__ALIAS_1 NV_PGRAPH_BOFFSET(4) /* */ -#define NV_PGRAPH_BOFFSET4_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BOFFSET4_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BOFFSET5 0x00400654 /* RW-4R */ -#define NV_PGRAPH_BOFFSET5__ALIAS_1 NV_PGRAPH_BOFFSET(5) /* */ -#define NV_PGRAPH_BOFFSET5_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BOFFSET5_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BBASE(i) (0x00400658+(i)*4) /* RW-4A */ -#define NV_PGRAPH_BBASE__SIZE_1 6 /* */ -#define NV_PGRAPH_BBASE_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BBASE_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BBASE0 0x00400658 /* RW-4R */ -#define NV_PGRAPH_BBASE0__ALIAS_1 NV_PGRAPH_BBASE(0) /* */ -#define NV_PGRAPH_BBASE0_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BBASE0_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BBASE1 0x0040065c /* RW-4R */ -#define NV_PGRAPH_BBASE1__ALIAS_1 NV_PGRAPH_BBASE(1) /* */ -#define NV_PGRAPH_BBASE1_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BBASE1_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BBASE2 0x00400660 /* RW-4R */ -#define NV_PGRAPH_BBASE2__ALIAS_1 NV_PGRAPH_BBASE(2) /* */ -#define NV_PGRAPH_BBASE2_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BBASE2_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BBASE3 0x00400664 /* RW-4R */ -#define NV_PGRAPH_BBASE3__ALIAS_1 NV_PGRAPH_BBASE(3) /* */ -#define NV_PGRAPH_BBASE3_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BBASE3_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BBASE4 0x00400668 /* RW-4R */ -#define NV_PGRAPH_BBASE4__ALIAS_1 NV_PGRAPH_BBASE(4) /* */ -#define NV_PGRAPH_BBASE4_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BBASE4_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BBASE5 0x0040066C /* RW-4R */ -#define NV_PGRAPH_BBASE5__ALIAS_1 NV_PGRAPH_BBASE(5) /* */ -#define NV_PGRAPH_BBASE5_LINADRS 23:0 /* RWIUF */ -#define NV_PGRAPH_BBASE5_LINADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPITCH(i) (0x00400670+(i)*4) /* RW-4A */ -#define NV_PGRAPH_BPITCH__SIZE_1 5 /* */ -#define NV_PGRAPH_BPITCH_VALUE 12:0 /* RWIUF */ -#define NV_PGRAPH_BPITCH_VALUE_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPITCH0 0x00400670 /* RW-4R */ -#define NV_PGRAPH_BPITCH0__ALIAS_1 NV_PGRAPH_BPITCH(0) /* */ -#define NV_PGRAPH_BPITCH0_VALUE 12:0 /* RWIUF */ -#define NV_PGRAPH_BPITCH0_VALUE_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPITCH1 0x00400674 /* RW-4R */ -#define NV_PGRAPH_BPITCH1__ALIAS_1 NV_PGRAPH_BPITCH(1) /* */ -#define NV_PGRAPH_BPITCH1_VALUE 12:0 /* RWIUF */ -#define NV_PGRAPH_BPITCH1_VALUE_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPITCH2 0x00400678 /* RW-4R */ -#define NV_PGRAPH_BPITCH2__ALIAS_1 NV_PGRAPH_BPITCH(2) /* */ -#define NV_PGRAPH_BPITCH2_VALUE 12:0 /* RWIUF */ -#define NV_PGRAPH_BPITCH2_VALUE_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPITCH3 0x0040067C /* RW-4R */ -#define NV_PGRAPH_BPITCH3__ALIAS_1 NV_PGRAPH_BPITCH(3) /* */ -#define NV_PGRAPH_BPITCH3_VALUE 12:0 /* RWIUF */ -#define NV_PGRAPH_BPITCH3_VALUE_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPITCH4 0x00400680 /* RW-4R */ -#define NV_PGRAPH_BPITCH4__ALIAS_1 NV_PGRAPH_BPITCH(4) /* */ -#define NV_PGRAPH_BPITCH4_VALUE 12:0 /* RWIUF */ -#define NV_PGRAPH_BPITCH4_VALUE_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BLIMIT(i) (0x00400684+(i)*4) /* RW-4A */ -#define NV_PGRAPH_BLIMIT__SIZE_1 6 /* */ -#define NV_PGRAPH_BLIMIT_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_BLIMIT_TYPE 31:31 /* RWIVF */ -#define NV_PGRAPH_BLIMIT_TYPE_IN_MEMORY 0x00000000 /* RW--V */ -#define NV_PGRAPH_BLIMIT_TYPE_NULL 0x00000001 /* RWI-V */ -#define NV_PGRAPH_BLIMIT0 0x00400684 /* RW-4R */ -#define NV_PGRAPH_BLIMIT0__ALIAS_1 NV_PGRAPH_BLIMIT(0) /* */ -#define NV_PGRAPH_BLIMIT0_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_BLIMIT0_TYPE 31:31 /* RWIVF */ -#define NV_PGRAPH_BLIMIT0_TYPE_IN_MEMORY 0x00000000 /* RW--V */ -#define NV_PGRAPH_BLIMIT0_TYPE_NULL 0x00000001 /* RWI-V */ -#define NV_PGRAPH_BLIMIT1 0x00400688 /* RW-4R */ -#define NV_PGRAPH_BLIMIT1__ALIAS_1 NV_PGRAPH_BLIMIT(1) /* */ -#define NV_PGRAPH_BLIMIT1_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_BLIMIT1_TYPE 31:31 /* RWIVF */ -#define NV_PGRAPH_BLIMIT1_TYPE_IN_MEMORY 0x00000000 /* RW--V */ -#define NV_PGRAPH_BLIMIT1_TYPE_NULL 0x00000001 /* RWI-V */ -#define NV_PGRAPH_BLIMIT2 0x0040068c /* RW-4R */ -#define NV_PGRAPH_BLIMIT2__ALIAS_1 NV_PGRAPH_BLIMIT(2) /* */ -#define NV_PGRAPH_BLIMIT2_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_BLIMIT2_TYPE 31:31 /* RWIVF */ -#define NV_PGRAPH_BLIMIT2_TYPE_IN_MEMORY 0x00000000 /* RW--V */ -#define NV_PGRAPH_BLIMIT2_TYPE_NULL 0x00000001 /* RWI-V */ -#define NV_PGRAPH_BLIMIT3 0x00400690 /* RW-4R */ -#define NV_PGRAPH_BLIMIT3__ALIAS_1 NV_PGRAPH_BLIMIT(3) /* */ -#define NV_PGRAPH_BLIMIT3_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_BLIMIT3_TYPE 31:31 /* RWIVF */ -#define NV_PGRAPH_BLIMIT3_TYPE_IN_MEMORY 0x00000000 /* RW--V */ -#define NV_PGRAPH_BLIMIT3_TYPE_NULL 0x00000001 /* RWI-V */ -#define NV_PGRAPH_BLIMIT4 0x00400694 /* RW-4R */ -#define NV_PGRAPH_BLIMIT4__ALIAS_1 NV_PGRAPH_BLIMIT(4) /* */ -#define NV_PGRAPH_BLIMIT4_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_BLIMIT4_TYPE 31:31 /* RWIVF */ -#define NV_PGRAPH_BLIMIT4_TYPE_IN_MEMORY 0x00000000 /* RW--V */ -#define NV_PGRAPH_BLIMIT4_TYPE_NULL 0x00000001 /* RWI-V */ -#define NV_PGRAPH_BLIMIT5 0x00400698 /* RW-4R */ -#define NV_PGRAPH_BLIMIT5__ALIAS_1 NV_PGRAPH_BLIMIT(5) /* */ -#define NV_PGRAPH_BLIMIT5_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_BLIMIT5_TYPE 31:31 /* RWIVF */ -#define NV_PGRAPH_BLIMIT5_TYPE_IN_MEMORY 0x00000000 /* RW--V */ -#define NV_PGRAPH_BLIMIT5_TYPE_NULL 0x00000001 /* RWI-V */ -#define NV_PGRAPH_BSWIZZLE2 0x0040069c /* RW-4R */ -#define NV_PGRAPH_BSWIZZLE2_WIDTH 19:16 /* RWIUF */ -#define NV_PGRAPH_BSWIZZLE2_WIDTH_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BSWIZZLE2_HEIGHT 27:24 /* RWIUF */ -#define NV_PGRAPH_BSWIZZLE2_HEIGHT_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BSWIZZLE5 0x004006a0 /* RW-4R */ -#define NV_PGRAPH_BSWIZZLE5_WIDTH 19:16 /* RWIUF */ -#define NV_PGRAPH_BSWIZZLE5_WIDTH_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BSWIZZLE5_HEIGHT 27:24 /* RWIUF */ -#define NV_PGRAPH_BSWIZZLE5_HEIGHT_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPIXEL 0x00400724 /* RW-4R */ -#define NV_PGRAPH_BPIXEL_DEPTH0 3:0 /* RWIVF */ -#define NV_PGRAPH_BPIXEL_DEPTH0_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_Y8 0x00000001 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_X1R5G5B5_Z1R5G5B5 0x00000002 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_X1R5G5B5_O1R5G5B5 0x00000003 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_A1R5G5B5 0x00000004 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_R5G6B5 0x00000005 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_Y16 0x00000006 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_X8R8G8B8_Z8R8G8B8 0x00000007 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_X8R8G8B8_O1Z7R8G8B8 0x00000008 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_X1A7R8G8B8_Z1A7R8G8B8 0x00000009 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_X1A7R8G8B8_O1A7R8G8B8 0x0000000a /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_X8R8G8B8_O8R8G8B8 0x0000000b /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_A8R8G8B8 0x0000000c /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_Y32 0x0000000d /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_V8YB8U8YA8 0x0000000e /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH0_YB8V8YA8U8 0x0000000f /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1 7:4 /* RWIVF */ -#define NV_PGRAPH_BPIXEL_DEPTH1_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_Y8 0x00000001 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_X1R5G5B5_Z1R5G5B5 0x00000002 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_X1R5G5B5_O1R5G5B5 0x00000003 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_A1R5G5B5 0x00000004 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_R5G6B5 0x00000005 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_Y16 0x00000006 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_X8R8G8B8_Z8R8G8B8 0x00000007 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_X8R8G8B8_O1Z7R8G8B8 0x00000008 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_X1A7R8G8B8_Z1A7R8G8B8 0x00000009 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_X1A7R8G8B8_O1A7R8G8B8 0x0000000a /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_X8R8G8B8_O8R8G8B8 0x0000000b /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_A8R8G8B8 0x0000000c /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_Y32 0x0000000d /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_V8YB8U8YA8 0x0000000e /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH1_YB8V8YA8U8 0x0000000f /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2 11:8 /* RWIVF */ -#define NV_PGRAPH_BPIXEL_DEPTH2_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_Y8 0x00000001 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_X1R5G5B5_Z1R5G5B5 0x00000002 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_X1R5G5B5_O1R5G5B5 0x00000003 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_A1R5G5B5 0x00000004 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_R5G6B5 0x00000005 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_Y16 0x00000006 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_X8R8G8B8_Z8R8G8B8 0x00000007 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_X8R8G8B8_O1Z7R8G8B8 0x00000008 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_X1A7R8G8B8_Z1A7R8G8B8 0x00000009 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_X1A7R8G8B8_O1A7R8G8B8 0x0000000a /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_X8R8G8B8_O8R8G8B8 0x0000000b /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_A8R8G8B8 0x0000000c /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_Y32 0x0000000d /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_V8YB8U8YA8 0x0000000e /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH2_YB8V8YA8U8 0x0000000f /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3 15:12 /* RWIVF */ -#define NV_PGRAPH_BPIXEL_DEPTH3_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_Y8 0x00000001 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_X1R5G5B5_Z1R5G5B5 0x00000002 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_X1R5G5B5_O1R5G5B5 0x00000003 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_A1R5G5B5 0x00000004 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_R5G6B5 0x00000005 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_Y16 0x00000006 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_X8R8G8B8_Z8R8G8B8 0x00000007 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_X8R8G8B8_O1Z7R8G8B8 0x00000008 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_X1A7R8G8B8_Z1A7R8G8B8 0x00000009 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_X1A7R8G8B8_O1A7R8G8B8 0x0000000a /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_X8R8G8B8_O8R8G8B8 0x0000000b /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_A8R8G8B8 0x0000000c /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_Y32 0x0000000d /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_V8YB8U8YA8 0x0000000e /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH3_YB8V8YA8U8 0x0000000f /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4 19:16 /* RWIVF */ -#define NV_PGRAPH_BPIXEL_DEPTH4_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_Y8 0x00000001 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_X1R5G5B5_Z1R5G5B5 0x00000002 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_X1R5G5B5_O1R5G5B5 0x00000003 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_A1R5G5B5 0x00000004 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_R5G6B5 0x00000005 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_Y16 0x00000006 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_X8R8G8B8_Z8R8G8B8 0x00000007 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_X8R8G8B8_O1Z7R8G8B8 0x00000008 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_X1A7R8G8B8_Z1A7R8G8B8 0x00000009 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_X1A7R8G8B8_O1A7R8G8B8 0x0000000a /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_X8R8G8B8_O8R8G8B8 0x0000000b /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_A8R8G8B8 0x0000000c /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_Y32 0x0000000d /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_V8YB8U8YA8 0x0000000e /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH4_YB8V8YA8U8 0x0000000f /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5 23:20 /* RWIVF */ -#define NV_PGRAPH_BPIXEL_DEPTH5_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_Y8 0x00000001 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_X1R5G5B5_Z1R5G5B5 0x00000002 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_X1R5G5B5_O1R5G5B5 0x00000003 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_A1R5G5B5 0x00000004 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_R5G6B5 0x00000005 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_Y16 0x00000006 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_X8R8G8B8_Z8R8G8B8 0x00000007 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_X8R8G8B8_O1Z7R8G8B8 0x00000008 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_X1A7R8G8B8_Z1A7R8G8B8 0x00000009 /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_X1A7R8G8B8_O1A7R8G8B8 0x0000000a /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_X8R8G8B8_O8R8G8B8 0x0000000b /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_A8R8G8B8 0x0000000c /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_Y32 0x0000000d /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_V8YB8U8YA8 0x0000000e /* RW--V */ -#define NV_PGRAPH_BPIXEL_DEPTH5_YB8V8YA8U8 0x0000000f /* RW--V */ -#define NV_PGRAPH_LIMIT_VIOL_PIX 0x00400610 /* RW-4R */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_ADRS 23:0 /* RWIVF */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_ADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_BLIT 29:29 /* RWIVF */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_BLIT_NO_VIOL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_BLIT_VIOL 0x00000001 /* RW--V */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_LIMIT 30:30 /* RWIVF */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_LIMIT_NO_VIOL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_LIMIT_VIOL 0x00000001 /* RW--V */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_OVRFLW 31:31 /* RWIVF */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_OVRFLW_NO_VIOL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_LIMIT_VIOL_PIX_OVRFLW_VIOL 0x00000001 /* RW--V */ -#define NV_PGRAPH_LIMIT_VIOL_Z 0x00400614 /* RW-4R */ -#define NV_PGRAPH_LIMIT_VIOL_Z_ADRS 23:0 /* RWIVF */ -#define NV_PGRAPH_LIMIT_VIOL_Z_ADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_LIMIT_VIOL_Z_LIMIT 30:30 /* RWIVF */ -#define NV_PGRAPH_LIMIT_VIOL_Z_LIMIT_NO_VIOL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_LIMIT_VIOL_Z_LIMIT_VIOL 0x00000001 /* RW--V */ -#define NV_PGRAPH_LIMIT_VIOL_Z_OVRFLW 31:31 /* RWIVF */ -#define NV_PGRAPH_LIMIT_VIOL_Z_OVRFLW_NO_VIOL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_LIMIT_VIOL_Z_OVRFLW_VIOL 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE 0x00400710 /* RW-4R */ -#define NV_PGRAPH_STATE_BUFFER_0 0:0 /* RWIVF */ -#define NV_PGRAPH_STATE_BUFFER_0_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_BUFFER_0_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_BUFFER_1 1:1 /* RWIVF */ -#define NV_PGRAPH_STATE_BUFFER_1_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_BUFFER_1_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_BUFFER_2 2:2 /* RWIVF */ -#define NV_PGRAPH_STATE_BUFFER_2_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_BUFFER_2_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_BUFFER_3 3:3 /* RWIVF */ -#define NV_PGRAPH_STATE_BUFFER_3_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_BUFFER_3_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_BUFFER_4 4:4 /* RWIVF */ -#define NV_PGRAPH_STATE_BUFFER_4_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_BUFFER_4_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_BUFFER_5 5:5 /* RWIVF */ -#define NV_PGRAPH_STATE_BUFFER_5_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_BUFFER_5_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_PITCH_0 8:8 /* RWIVF */ -#define NV_PGRAPH_STATE_PITCH_0_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_PITCH_0_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_PITCH_1 9:9 /* RWIVF */ -#define NV_PGRAPH_STATE_PITCH_1_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_PITCH_1_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_PITCH_2 10:10 /* RWIVF */ -#define NV_PGRAPH_STATE_PITCH_2_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_PITCH_2_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_PITCH_3 11:11 /* RWIVF */ -#define NV_PGRAPH_STATE_PITCH_3_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_PITCH_3_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_PITCH_4 12:12 /* RWIVF */ -#define NV_PGRAPH_STATE_PITCH_4_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_PITCH_4_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_CHROMA_COLOR 16:16 /* RWIVF */ -#define NV_PGRAPH_STATE_CHROMA_COLOR_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_CHROMA_COLOR_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_CHROMA_COLORFMT 17:17 /* RWIVF */ -#define NV_PGRAPH_STATE_CHROMA_COLORFMT_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_CHROMA_COLORFMT_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_CPATTERN_COLORFMT 20:20 /* RWIVF */ -#define NV_PGRAPH_STATE_CPATTERN_COLORFMT_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_CPATTERN_COLORFMT_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_CPATTERN_MONOFMT 21:21 /* RWIVF */ -#define NV_PGRAPH_STATE_CPATTERN_MONOFMT_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_CPATTERN_MONOFMT_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_CPATTERN_SELECT 22:22 /* RWIVF */ -#define NV_PGRAPH_STATE_CPATTERN_SELECT_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_CPATTERN_SELECT_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_PATTERN_COLOR0 24:24 /* RWIVF */ -#define NV_PGRAPH_STATE_PATTERN_COLOR0_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_PATTERN_COLOR0_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_PATTERN_COLOR1 25:25 /* RWIVF */ -#define NV_PGRAPH_STATE_PATTERN_COLOR1_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_PATTERN_COLOR1_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_PATTERN_PATT0 26:26 /* RWIVF */ -#define NV_PGRAPH_STATE_PATTERN_PATT0_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_PATTERN_PATT0_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_STATE_PATTERN_PATT1 27:27 /* RWIVF */ -#define NV_PGRAPH_STATE_PATTERN_PATT1_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_STATE_PATTERN_PATT1_VALID 0x00000001 /* RW--V */ -#define NV_PGRAPH_CACHE_INDEX 0x00400728 /* RW-4R */ -#define NV_PGRAPH_CACHE_INDEX_BANK 2:2 /* RWXVF */ -#define NV_PGRAPH_CACHE_INDEX_BANK_10 0x00000000 /* RW--V */ -#define NV_PGRAPH_CACHE_INDEX_BANK_32 0x00000001 /* RW--V */ -#define NV_PGRAPH_CACHE_INDEX_ADRS 12:3 /* RWXVF */ -#define NV_PGRAPH_CACHE_INDEX_ADRS_0 0x00000000 /* RW--V */ -#define NV_PGRAPH_CACHE_INDEX_ADRS_1024 0x00000400 /* RW--V */ -#define NV_PGRAPH_CACHE_INDEX_OP 14:13 /* RWXVF */ -#define NV_PGRAPH_CACHE_INDEX_OP_WR_CACHE 0x00000000 /* RW--V */ -#define NV_PGRAPH_CACHE_INDEX_OP_RD_CACHE 0x00000001 /* RW--V */ -#define NV_PGRAPH_CACHE_INDEX_OP_RD_INDEX 0x00000002 /* RW--V */ -#define NV_PGRAPH_CACHE_RAM 0x0040072c /* RW-4R */ -#define NV_PGRAPH_CACHE_RAM_VALUE 31:0 /* RWXVF */ -#define NV_PGRAPH_DMA_PITCH 0x00400760 /* RW-4R */ -#define NV_PGRAPH_DMA_PITCH_S0 15:0 /* RWXSF */ -#define NV_PGRAPH_DMA_PITCH_S1 31:16 /* RWXSF */ -#define NV_PGRAPH_DVD_COLORFMT 0x00400764 /* RW-4R */ -#define NV_PGRAPH_DVD_COLORFMT_IMAGE 5:0 /* RWNVF */ -#define NV_PGRAPH_DVD_COLORFMT_IMAGE_FORMAT_INVALID 0x00 /* RWN-V */ -#define NV_PGRAPH_DVD_COLORFMT_IMAGE_FORMAT_LE_V8YB8U8YA8 0x12 /* RW--V */ -#define NV_PGRAPH_DVD_COLORFMT_IMAGE_FORMAT_LE_YB8V8YA8U8 0x13 /* RW--V */ -#define NV_PGRAPH_DVD_COLORFMT_OVLY 9:8 /* RWNVF */ -#define NV_PGRAPH_DVD_COLORFMT_OVLY_FORMAT_INVALID 0x00 /* RWN-V */ -#define NV_PGRAPH_DVD_COLORFMT_OVLY_FORMAT_LE_A8Y8U8V8 0x01 /* RW--V */ -#define NV_PGRAPH_DVD_COLORFMT_OVLY_FORMAT_LE_A4V6YB6A4U6YA6 0x02 /* RW--V */ -#define NV_PGRAPH_DVD_COLORFMT_OVLY_FORMAT_TRANSPARENT 0x03 /* RW--V */ -#define NV_PGRAPH_SCALED_FORMAT 0x00400768 /* RW-4R */ -#define NV_PGRAPH_SCALED_FORMAT_ORIGIN 17:16 /* RWIVF */ -#define NV_PGRAPH_SCALED_FORMAT_ORIGIN_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_SCALED_FORMAT_ORIGIN_CENTER 0x00000001 /* RW--V */ -#define NV_PGRAPH_SCALED_FORMAT_ORIGIN_CORNER 0x00000002 /* RW--V */ -#define NV_PGRAPH_SCALED_FORMAT_INTERPOLATOR 24:24 /* RWIVF */ -#define NV_PGRAPH_SCALED_FORMAT_INTERPOLATOR_ZOH 0x00000000 /* RWI-V */ -#define NV_PGRAPH_SCALED_FORMAT_INTERPOLATOR_FOH 0x00000001 /* RW--V */ -#define NV_PGRAPH_PATT_COLOR0 0x00400800 /* RW-4R */ -#define NV_PGRAPH_PATT_COLOR0_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_PATT_COLOR1 0x00400804 /* RW-4R */ -#define NV_PGRAPH_PATT_COLOR1_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_PATT_COLORRAM(i) (0x00400900+(i)*4) /* R--4A */ -#define NV_PGRAPH_PATT_COLORRAM__SIZE_1 64 /* */ -#define NV_PGRAPH_PATT_COLORRAM_VALUE 23:0 /* R--UF */ -#define NV_PGRAPH_PATTERN(i) (0x00400808+(i)*4) /* RW-4A */ -#define NV_PGRAPH_PATTERN__SIZE_1 2 /* */ -#define NV_PGRAPH_PATTERN_BITMAP 31:0 /* RWXVF */ -#define NV_PGRAPH_PATTERN_SHAPE 0x00400810 /* RW-4R */ -#define NV_PGRAPH_PATTERN_SHAPE_VALUE 1:0 /* RWXVF */ -#define NV_PGRAPH_PATTERN_SHAPE_VALUE_8X_8Y 0x00000000 /* RW--V */ -#define NV_PGRAPH_PATTERN_SHAPE_VALUE_64X_1Y 0x00000001 /* RW--V */ -#define NV_PGRAPH_PATTERN_SHAPE_VALUE_1X_64Y 0x00000002 /* RW--V */ -#define NV_PGRAPH_PATTERN_SHAPE_SELECT 4:4 /* RWXVF */ -#define NV_PGRAPH_PATTERN_SHAPE_SELECT_2COLOR 0x00000000 /* RW--V */ -#define NV_PGRAPH_PATTERN_SHAPE_SELECT_FULLCOLOR 0x00000001 /* RW--V */ -#define NV_PGRAPH_MONO_COLOR0 0x00400600 /* RW-4R */ -#define NV_PGRAPH_MONO_COLOR0_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_ROP3 0x00400604 /* RW-4R */ -#define NV_PGRAPH_ROP3_VALUE 7:0 /* RWXVF */ -#define NV_PGRAPH_CHROMA 0x00400814 /* RW-4R */ -#define NV_PGRAPH_CHROMA_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_BETA_AND 0x00400608 /* RW-4R */ -#define NV_PGRAPH_BETA_AND_VALUE_FRACTION 30:23 /* RWXUF */ -#define NV_PGRAPH_BETA_PREMULT 0x0040060c /* RW-4R */ -#define NV_PGRAPH_BETA_PREMULT_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_CONTROL0 0x00400818 /* RW-4R */ -#define NV_PGRAPH_CONTROL1 0x0040081c /* RW-4R */ -#define NV_PGRAPH_CONTROL2 0x00400820 /* RW-4R */ -#define NV_PGRAPH_BLEND 0x00400824 /* RW-4R */ -#define NV_PGRAPH_DPRAM_INDEX 0x00400828 /* RW-4R */ -#define NV_PGRAPH_DPRAM_INDEX_ADRS 6:0 /* RWIVF */ -#define NV_PGRAPH_DPRAM_INDEX_ADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_DPRAM_INDEX_SELECT 10:8 /* RWIVF */ -#define NV_PGRAPH_DPRAM_INDEX_SELECT_ADRS_0 0x00000000 /* RWI-V */ -#define NV_PGRAPH_DPRAM_INDEX_SELECT_ADRS_1 0x00000001 /* RW--V */ -#define NV_PGRAPH_DPRAM_INDEX_SELECT_DATA_0 0x00000002 /* RW--V */ -#define NV_PGRAPH_DPRAM_INDEX_SELECT_DATA_1 0x00000003 /* RW--V */ -#define NV_PGRAPH_DPRAM_INDEX_SELECT_WE_0 0x00000004 /* RW--V */ -#define NV_PGRAPH_DPRAM_INDEX_SELECT_WE_1 0x00000005 /* RW--V */ -#define NV_PGRAPH_DPRAM_INDEX_SELECT_ALPHA_0 0x00000006 /* RW--V */ -#define NV_PGRAPH_DPRAM_INDEX_SELECT_ALPHA_1 0x00000007 /* RW--V */ -#define NV_PGRAPH_DPRAM_DATA 0x0040082c /* RW-4R */ -#define NV_PGRAPH_DPRAM_DATA_VALUE 31:0 /* RWXVF */ -#define NV_PGRAPH_DPRAM_ADRS_0 0x0040082c /* RW-4R */ -#define NV_PGRAPH_DPRAM_ADRS_0__ALIAS_1 NV_PGRAPH_DPRAM_DATA /* */ -#define NV_PGRAPH_DPRAM_ADRS_0_VALUE 19:0 /* RWXVF */ -#define NV_PGRAPH_DPRAM_ADRS_1 0x0040082c /* RW-4R */ -#define NV_PGRAPH_DPRAM_ADRS_1__ALIAS_1 NV_PGRAPH_DPRAM_DATA /* */ -#define NV_PGRAPH_DPRAM_ADRS_1_VALUE 19:0 /* RWXVF */ -#define NV_PGRAPH_DPRAM_DATA_0 0x0040082c /* RW-4R */ -#define NV_PGRAPH_DPRAM_DATA_0__ALIAS_1 NV_PGRAPH_DPRAM_DATA /* */ -#define NV_PGRAPH_DPRAM_DATA_0_VALUE 31:0 /* RWXVF */ -#define NV_PGRAPH_DPRAM_DATA_1 0x0040082c /* RW-4R */ -#define NV_PGRAPH_DPRAM_DATA_1__ALIAS_1 NV_PGRAPH_DPRAM_DATA /* */ -#define NV_PGRAPH_DPRAM_DATA_1_VALUE 31:0 /* RWXVF */ -#define NV_PGRAPH_DPRAM_WE_0 0x0040082c /* RW-4R */ -#define NV_PGRAPH_DPRAM_WE_0__ALIAS_1 NV_PGRAPH_DPRAM_DATA /* */ -#define NV_PGRAPH_DPRAM_WE_0_VALUE 23:0 /* RWXVF */ -#define NV_PGRAPH_DPRAM_WE_1 0x0040082c /* RW-4R */ -#define NV_PGRAPH_DPRAM_WE_1__ALIAS_1 NV_PGRAPH_DPRAM_DATA /* */ -#define NV_PGRAPH_DPRAM_WE_1_VALUE 23:0 /* RWXVF */ -#define NV_PGRAPH_DPRAM_ALPHA_0 0x0040082c /* RW-4R */ -#define NV_PGRAPH_DPRAM_ALPHA_0__ALIAS_1 NV_PGRAPH_DPRAM_DATA /* */ -#define NV_PGRAPH_DPRAM_ALPHA_0_VALUE 31:0 /* RWXVF */ -#define NV_PGRAPH_DPRAM_ALPHA_1 0x0040082c /* RW-4R */ -#define NV_PGRAPH_DPRAM_ALPHA_1__ALIAS_1 NV_PGRAPH_DPRAM_DATA /* */ -#define NV_PGRAPH_DPRAM_ALPHA_1_VALUE 31:0 /* RWXVF */ -#define NV_PGRAPH_STORED_FMT 0x00400830 /* RW-4R */ -#define NV_PGRAPH_STORED_FMT_MONO0 5:0 /* RWXVF */ -#define NV_PGRAPH_STORED_FMT_PATT0 13:8 /* RWXVF */ -#define NV_PGRAPH_STORED_FMT_PATT1 21:16 /* RWXVF */ -#define NV_PGRAPH_STORED_FMT_CHROMA 29:24 /* RWXVF */ -#define NV_PGRAPH_FORMATS 0x00400618 /* RW-4R */ -#define NV_PGRAPH_FORMATS_ROP 2:0 /* R-XVF */ -#define NV_PGRAPH_FORMATS_ROP_Y8 0x00000000 /* -W--V */ -#define NV_PGRAPH_FORMATS_ROP_RGB15 0x00000001 /* -W--V */ -#define NV_PGRAPH_FORMATS_ROP_RGB16 0x00000002 /* -W--V */ -#define NV_PGRAPH_FORMATS_ROP_Y16 0x00000003 /* -W--V */ -#define NV_PGRAPH_FORMATS_ROP_INVALID 0x00000004 /* -W--V */ -#define NV_PGRAPH_FORMATS_ROP_RGB24 0x00000005 /* -W--V */ -#define NV_PGRAPH_FORMATS_ROP_RGB30 0x00000006 /* -W--V */ -#define NV_PGRAPH_FORMATS_ROP_Y32 0x00000007 /* -W--V */ -#define NV_PGRAPH_FORMATS_SRC 9:4 /* R-XVF */ -#define NV_PGRAPH_FORMATS_SRC_INVALID 0x00000000 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_Y8 0x00000001 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_X16A8Y8 0x00000002 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_X24Y8 0x00000003 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_A1R5G5B5 0x00000006 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_X1R5G5B5 0x00000007 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_X16A1R5G5B5 0x00000008 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_X17R5G5B5 0x00000009 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_R5G6B5 0x0000000A /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_A16R5G6B5 0x0000000B /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_X16R5G6B5 0x0000000C /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_A8R8G8B8 0x0000000D /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_X8R8G8B8 0x0000000E /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_Y16 0x0000000F /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_A16Y16 0x00000010 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_X16Y16 0x00000011 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_V8YB8U8YA8 0x00000012 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_YB8V8YA8U8 0x00000013 /* RW--V */ -#define NV_PGRAPH_FORMATS_SRC_LE_Y32 0x00000014 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB 15:12 /* R-XVF */ -#define NV_PGRAPH_FORMATS_FB_INVALID 0x00000000 /* RWI-V */ -#define NV_PGRAPH_FORMATS_FB_Y8 0x00000001 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_X1R5G5B5_Z1R5G5B5 0x00000002 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_X1R5G5B5_O1R5G5B5 0x00000003 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_A1R5G5B5 0x00000004 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_R5G6B5 0x00000005 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_Y16 0x00000006 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_X8R8G8B8_Z8R8G8B8 0x00000007 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_X8R8G8B8_O1Z7R8G8B8 0x00000008 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_X1A7R8G8B8_Z1A7R8G8B8 0x00000009 /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_X1A7R8G8B8_O1A7R8G8B8 0x0000000a /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_X8R8G8B8_O8R8G8B8 0x0000000b /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_A8R8G8B8 0x0000000c /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_Y32 0x0000000d /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_V8YB8U8YA8 0x0000000e /* RW--V */ -#define NV_PGRAPH_FORMATS_FB_YB8V8YA8U8 0x0000000f /* RW--V */ -#define NV_PGRAPH_ABS_X_RAM(i) (0x00400400+(i)*4) /* RW-4A */ -#define NV_PGRAPH_ABS_X_RAM__SIZE_1 32 /* */ -#define NV_PGRAPH_ABS_X_RAM_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_X_RAM_BPORT(i) (0x00400c00+(i)*4) /* R--4A */ -#define NV_PGRAPH_X_RAM_BPORT__SIZE_1 32 /* */ -#define NV_PGRAPH_X_RAM_BPORT_VALUE 31:0 /* R--UF */ -#define NV_PGRAPH_ABS_Y_RAM(i) (0x00400480+(i)*4) /* RW-4A */ -#define NV_PGRAPH_ABS_Y_RAM__SIZE_1 32 /* */ -#define NV_PGRAPH_ABS_Y_RAM_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_Y_RAM_BPORT(i) (0x00400c80+(i)*4) /* R--4A */ -#define NV_PGRAPH_Y_RAM_BPORT__SIZE_1 32 /* */ -#define NV_PGRAPH_Y_RAM_BPORT_VALUE 31:0 /* R--UF */ -#define NV_PGRAPH_XY_LOGIC_MISC0 0x00400514 /* RW-4R */ -#define NV_PGRAPH_XY_LOGIC_MISC0_COUNTER 17:0 /* RWBUF */ -#define NV_PGRAPH_XY_LOGIC_MISC0_COUNTER_0 0x00000000 /* RWB-V */ -#define NV_PGRAPH_XY_LOGIC_MISC0_DIMENSION 20:20 /* RWVVF */ -#define NV_PGRAPH_XY_LOGIC_MISC0_DIMENSION_NONZERO 0x00000000 /* RWV-V */ -#define NV_PGRAPH_XY_LOGIC_MISC0_DIMENSION_ZERO 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC0_INDEX 31:28 /* RWBUF */ -#define NV_PGRAPH_XY_LOGIC_MISC0_INDEX_0 0x00000000 /* RWB-V */ -#define NV_PGRAPH_XY_LOGIC_MISC1 0x00400518 /* RW-4R */ -#define NV_PGRAPH_XY_LOGIC_MISC1_INITIAL 0:0 /* RWNVF */ -#define NV_PGRAPH_XY_LOGIC_MISC1_INITIAL_NEEDED 0x00000000 /* RWN-V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_INITIAL_DONE 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_XTRACLIPX 4:4 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC1_XTRACLIPX_NOTNULL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_XTRACLIPX_NULL 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_XTRACLIPY 5:5 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC1_XTRACLIPY_NOTNULL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_XTRACLIPY_NULL 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_SEL_XIMAX 12:12 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC1_SEL_XIMAX_UUMAX 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_SEL_XIMAX_IMAGEMAX 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_SEL_YIMAX 16:16 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC1_SEL_YIMAX_UUMAX 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_SEL_YIMAX_IMAGEMAX 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_SEL_XXTRA 20:20 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC1_SEL_XXTRA_CLIPMAX 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC1_SEL_XXTRA_IMAGEMAX 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC2 0x0040051C /* RW-4R */ -#define NV_PGRAPH_XY_LOGIC_MISC2_HANDOFF 0:0 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC2_HANDOFF_DISABLE 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_HANDOFF_ENABLE 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_XTRACLIPX 4:4 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC2_XTRACLIPX_NOTNULL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_XTRACLIPX_NULL 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_XTRACLIPY 5:5 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC2_XTRACLIPY_NOTNULL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_XTRACLIPY_NULL 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_SEL_XIMAX 12:12 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC2_SEL_XIMAX_UCMAX 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_SEL_XIMAX_IMAGEMAX 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_SEL_YIMAX 16:16 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC2_SEL_YIMAX_UCMAX 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_SEL_YIMAX_IMAGEMAX 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_SEL_XXTRA 20:20 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC2_SEL_XXTRA_CLIPMAX 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC2_SEL_XXTRA_IMAGEMAX 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC3 0x00400520 /* RW-4R */ -#define NV_PGRAPH_XY_LOGIC_MISC3_WDIMY_EQ_0 0:0 /* RWXVF */ -#define NV_PGRAPH_XY_LOGIC_MISC3_WDIMY_EQ_0_NULL 0x00000000 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC3_WDIMY_EQ_0_TRUE 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC3_RELOAD_WDIMY 4:4 /* RWXVF */ -#define NV_PGRAPH_XY_LOGIC_MISC3_RELOAD_WDIMY_NULL 0x00000000 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC3_RELOAD_WDIMY_TRUE 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC3_RELOAD_WX 8:8 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC3_RELOAD_WX_NULL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC3_RELOAD_WX_TRUE 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC3_TEXT_ALG 12:12 /* RWIVF */ -#define NV_PGRAPH_XY_LOGIC_MISC3_TEXT_ALG_NULL 0x00000000 /* RWI-V */ -#define NV_PGRAPH_XY_LOGIC_MISC3_TEXT_ALG_TRUE 0x00000001 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC3_TEXT_DIMX 22:16 /* RWXUF */ -#define NV_PGRAPH_XY_LOGIC_MISC3_TEXT_DIMX_0 0x00000000 /* RW--V */ -#define NV_PGRAPH_XY_LOGIC_MISC3_TEXT_WDIMX 30:24 /* RWXUF */ -#define NV_PGRAPH_XY_LOGIC_MISC3_TEXT_WDIMX_0 0x00000000 /* RW--V */ -#define NV_PGRAPH_X_MISC 0x00400500 /* RW-4R */ -#define NV_PGRAPH_X_MISC_BIT33_0 0:0 /* RWNVF */ -#define NV_PGRAPH_X_MISC_BIT33_0_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_X_MISC_BIT33_1 1:1 /* RWNVF */ -#define NV_PGRAPH_X_MISC_BIT33_1_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_X_MISC_BIT33_2 2:2 /* RWNVF */ -#define NV_PGRAPH_X_MISC_BIT33_2_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_X_MISC_BIT33_3 3:3 /* RWNVF */ -#define NV_PGRAPH_X_MISC_BIT33_3_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_X_MISC_RANGE_0 4:4 /* RWNVF */ -#define NV_PGRAPH_X_MISC_RANGE_0_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_X_MISC_RANGE_1 5:5 /* RWNVF */ -#define NV_PGRAPH_X_MISC_RANGE_1_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_X_MISC_RANGE_2 6:6 /* RWNVF */ -#define NV_PGRAPH_X_MISC_RANGE_2_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_X_MISC_RANGE_3 7:7 /* RWNVF */ -#define NV_PGRAPH_X_MISC_RANGE_3_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_X_MISC_ADDER_OUTPUT 29:28 /* RWXVF */ -#define NV_PGRAPH_X_MISC_ADDER_OUTPUT_EQ_0 0x00000000 /* RW--V */ -#define NV_PGRAPH_X_MISC_ADDER_OUTPUT_LT_0 0x00000001 /* RW--V */ -#define NV_PGRAPH_X_MISC_ADDER_OUTPUT_GT_0 0x00000002 /* RW--V */ -#define NV_PGRAPH_Y_MISC 0x00400504 /* RW-4R */ -#define NV_PGRAPH_Y_MISC_BIT33_0 0:0 /* RWNVF */ -#define NV_PGRAPH_Y_MISC_BIT33_0_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_Y_MISC_BIT33_1 1:1 /* RWNVF */ -#define NV_PGRAPH_Y_MISC_BIT33_1_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_Y_MISC_BIT33_2 2:2 /* RWNVF */ -#define NV_PGRAPH_Y_MISC_BIT33_2_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_Y_MISC_BIT33_3 3:3 /* RWNVF */ -#define NV_PGRAPH_Y_MISC_BIT33_3_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_Y_MISC_RANGE_0 4:4 /* RWNVF */ -#define NV_PGRAPH_Y_MISC_RANGE_0_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_Y_MISC_RANGE_1 5:5 /* RWNVF */ -#define NV_PGRAPH_Y_MISC_RANGE_1_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_Y_MISC_RANGE_2 6:6 /* RWNVF */ -#define NV_PGRAPH_Y_MISC_RANGE_2_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_Y_MISC_RANGE_3 7:7 /* RWNVF */ -#define NV_PGRAPH_Y_MISC_RANGE_3_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_Y_MISC_ADDER_OUTPUT 29:28 /* RWXVF */ -#define NV_PGRAPH_Y_MISC_ADDER_OUTPUT_EQ_0 0x00000000 /* RW--V */ -#define NV_PGRAPH_Y_MISC_ADDER_OUTPUT_LT_0 0x00000001 /* RW--V */ -#define NV_PGRAPH_Y_MISC_ADDER_OUTPUT_GT_0 0x00000002 /* RW--V */ -#define NV_PGRAPH_ABS_UCLIP_XMIN 0x0040053C /* RW-4R */ -#define NV_PGRAPH_ABS_UCLIP_XMIN_VALUE 15:0 /* RWXSF */ -#define NV_PGRAPH_ABS_UCLIP_XMAX 0x00400544 /* RW-4R */ -#define NV_PGRAPH_ABS_UCLIP_XMAX_VALUE 17:0 /* RWXSF */ -#define NV_PGRAPH_ABS_UCLIP_YMIN 0x00400540 /* RW-4R */ -#define NV_PGRAPH_ABS_UCLIP_YMIN_VALUE 15:0 /* RWXSF */ -#define NV_PGRAPH_ABS_UCLIP_YMAX 0x00400548 /* RW-4R */ -#define NV_PGRAPH_ABS_UCLIP_YMAX_VALUE 17:0 /* RWXSF */ -#define NV_PGRAPH_ABS_UCLIPA_XMIN 0x00400560 /* RW-4R */ -#define NV_PGRAPH_ABS_UCLIPA_XMIN_VALUE 15:0 /* RWXSF */ -#define NV_PGRAPH_ABS_UCLIPA_XMAX 0x00400568 /* RW-4R */ -#define NV_PGRAPH_ABS_UCLIPA_XMAX_VALUE 17:0 /* RWXSF */ -#define NV_PGRAPH_ABS_UCLIPA_YMIN 0x00400564 /* RW-4R */ -#define NV_PGRAPH_ABS_UCLIPA_YMIN_VALUE 15:0 /* RWXSF */ -#define NV_PGRAPH_ABS_UCLIPA_YMAX 0x0040056C /* RW-4R */ -#define NV_PGRAPH_ABS_UCLIPA_YMAX_VALUE 17:0 /* RWXSF */ -#define NV_PGRAPH_SOURCE_COLOR 0x0040050C /* RW-4R */ -#define NV_PGRAPH_SOURCE_COLOR_VALUE 31:0 /* RWNVF */ -#define NV_PGRAPH_SOURCE_COLOR_VALUE_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_VALID1 0x00400508 /* RW-4R */ -#define NV_PGRAPH_VALID1_VLD 22:0 /* RWNVF */ -#define NV_PGRAPH_VALID1_VLD_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_VALID1_CLIP_MIN 28:28 /* RWIVF */ -#define NV_PGRAPH_VALID1_CLIP_MIN_NO_ERROR 0x00000000 /* RWI-V */ -#define NV_PGRAPH_VALID1_CLIP_MIN_ONLY 0x00000001 /* RW--V */ -#define NV_PGRAPH_VALID1_CLIPA_MIN 29:29 /* RWIVF */ -#define NV_PGRAPH_VALID1_CLIPA_MIN_NO_ERROR 0x00000000 /* RWI-V */ -#define NV_PGRAPH_VALID1_CLIPA_MIN_ONLY 0x00000001 /* RW--V */ -#define NV_PGRAPH_VALID1_CLIP_MAX 30:30 /* RWIVF */ -#define NV_PGRAPH_VALID1_CLIP_MAX_NO_ERROR 0x00000000 /* RWI-V */ -#define NV_PGRAPH_VALID1_CLIP_MAX_ONLY 0x00000001 /* RW--V */ -#define NV_PGRAPH_VALID1_CLIPA_MAX 31:31 /* RWIVF */ -#define NV_PGRAPH_VALID1_CLIPA_MAX_NO_ERROR 0x00000000 /* RWI-V */ -#define NV_PGRAPH_VALID1_CLIPA_MAX_ONLY 0x00000001 /* RW--V */ -#define NV_PGRAPH_VALID2 0x00400578 /* RW-4R */ -#define NV_PGRAPH_VALID2_VLD2 28:0 /* RWNVF */ -#define NV_PGRAPH_VALID2_VLD2_0 0x00000000 /* RWN-V */ -#define NV_PGRAPH_ABS_ICLIP_XMAX 0x00400534 /* RW-4R */ -#define NV_PGRAPH_ABS_ICLIP_XMAX_VALUE 17:0 /* RWXSF */ -#define NV_PGRAPH_ABS_ICLIP_YMAX 0x00400538 /* RW-4R */ -#define NV_PGRAPH_ABS_ICLIP_YMAX_VALUE 17:0 /* RWXSF */ -#define NV_PGRAPH_CLIPX_0 0x00400524 /* RW-4R */ -#define NV_PGRAPH_CLIPX_0_CLIP0_MIN 1:0 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP0_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP0_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP0_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP0_MAX 3:2 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP0_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP0_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP0_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP1_MIN 5:4 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP1_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP1_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP1_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP1_MAX 7:6 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP1_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP1_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP1_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP2_MIN 9:8 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP2_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP2_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP2_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP2_MAX 11:10 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP2_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP2_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP2_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP3_MIN 13:12 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP3_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP3_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP3_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP3_MAX 15:14 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP3_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP3_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP3_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP4_MIN 17:16 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP4_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP4_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP4_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP4_MAX 19:18 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP4_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP4_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP4_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP5_MIN 21:20 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP5_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP5_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP5_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP5_MAX 23:22 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP5_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP5_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP5_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP6_MIN 25:24 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP6_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP6_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP6_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP6_MAX 27:26 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP6_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP6_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP6_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP7_MIN 29:28 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP7_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP7_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP7_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP7_MAX 31:30 /* RWNVF */ -#define NV_PGRAPH_CLIPX_0_CLIP7_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_0_CLIP7_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_0_CLIP7_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1 0x00400528 /* RW-4R */ -#define NV_PGRAPH_CLIPX_1_CLIP8_MIN 1:0 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP8_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP8_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP8_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP8_MAX 3:2 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP8_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP8_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP8_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP9_MIN 5:4 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP9_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP9_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP9_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP9_MAX 7:6 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP9_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP9_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP9_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP10_MIN 9:8 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP10_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP10_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP10_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP10_MAX 11:10 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP10_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP10_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP10_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP11_MIN 13:12 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP11_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP11_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP11MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP11_MAX 15:14 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP11_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP11_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP11_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP12_MIN 17:16 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP12_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP12_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP12_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP12_MAX 19:18 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP12_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP12_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP12_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP13_MIN 21:20 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP13_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP13_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP13_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP13_MAX 23:22 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP13_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP13_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP13_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP14_MIN 25:24 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP14_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP14_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP14_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP14_MAX 27:26 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP14_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP14_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP14_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP15_MIN 29:28 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP15_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP15_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP15_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP15_MAX 31:30 /* RWNVF */ -#define NV_PGRAPH_CLIPX_1_CLIP15_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPX_1_CLIP15_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPX_1_CLIP15_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0 0x0040052c /* RW-4R */ -#define NV_PGRAPH_CLIPY_0_CLIP0_MIN 1:0 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP0_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP0_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP0_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP0_MAX 3:2 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP0_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP0_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP0_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP1_MIN 5:4 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP1_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP1_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP1_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP1_MAX 7:6 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP1_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP1_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP1_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP2_MIN 9:8 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP2_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP2_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP2_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP2_MAX 11:10 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP2_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP2_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP2_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP3_MIN 13:12 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP3_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP3_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP3_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP3_MAX 15:14 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP3_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP3_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP3_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP4_MIN 17:16 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP4_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP4_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP4_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP4_MAX 19:18 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP4_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP4_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP4_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP5_MIN 21:20 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP5_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP5_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP5_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP5_MAX 23:22 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP5_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP5_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP5_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP6_MIN 25:24 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP6_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP6_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP6_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP6_MAX 27:26 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP6_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP6_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP6_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP7_MIN 29:28 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP7_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP7_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP7_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP7_MAX 31:30 /* RWNVF */ -#define NV_PGRAPH_CLIPY_0_CLIP7_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_0_CLIP7_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_0_CLIP7_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1 0x00400530 /* RW-4R */ -#define NV_PGRAPH_CLIPY_1_CLIP8_MIN 1:0 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP8_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP8_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP8_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP8_MAX 3:2 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP8_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP8_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP8_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP9_MIN 5:4 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP9_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP9_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP9_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP9_MAX 7:6 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP9_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP9_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP9_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP10_MIN 9:8 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP10_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP10_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP10_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP10_MAX 11:10 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP10_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP10_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP10_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP11_MIN 13:12 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP11_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP11_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP11MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP11_MAX 15:14 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP11_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP11_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP11_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP12_MIN 17:16 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP12_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP12_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP12_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP12_MAX 19:18 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP12_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP12_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP12_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP13_MIN 21:20 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP13_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP13_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP13_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP13_MAX 23:22 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP13_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP13_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP13_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP14_MIN 25:24 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP14_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP14_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP14_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP14_MAX 27:26 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP14_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP14_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP14_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP15_MIN 29:28 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP15_MIN_GT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP15_MIN_LT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP15_MIN_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP15_MAX 31:30 /* RWNVF */ -#define NV_PGRAPH_CLIPY_1_CLIP15_MAX_LT 0x00000000 /* RW--V */ -#define NV_PGRAPH_CLIPY_1_CLIP15_MAX_GT 0x00000001 /* RWN-V */ -#define NV_PGRAPH_CLIPY_1_CLIP15_MAX_EQ 0x00000002 /* RW--V */ -#define NV_PGRAPH_MISC24_0 0x00400510 /* RW-4R */ -#define NV_PGRAPH_MISC24_0_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_MISC24_1 0x00400570 /* RW-4R */ -#define NV_PGRAPH_MISC24_1_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_MISC24_2 0x00400574 /* RW-4R */ -#define NV_PGRAPH_MISC24_2_VALUE 23:0 /* RWXUF */ -#define NV_PGRAPH_PASSTHRU_0 0x0040057C /* RW-4R */ -#define NV_PGRAPH_PASSTHRU_0_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_PASSTHRU_1 0x00400580 /* RW-4R */ -#define NV_PGRAPH_PASSTHRU_1_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_PASSTHRU_2 0x00400584 /* RW-4R */ -#define NV_PGRAPH_PASSTHRU_2_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_U_RAM(i) (0x00400d00+(i)*4) /* RW-4A */ -#define NV_PGRAPH_U_RAM__SIZE_1 16 /* */ -#define NV_PGRAPH_U_RAM_VALUE 31:6 /* RWXFF */ -#define NV_PGRAPH_V_RAM(i) (0x00400d40+(i)*4) /* RW-4A */ -#define NV_PGRAPH_V_RAM__SIZE_1 16 /* */ -#define NV_PGRAPH_V_RAM_VALUE 31:6 /* RWXFF */ -#define NV_PGRAPH_M_RAM(i) (0x00400d80+(i)*4) /* RW-4A */ -#define NV_PGRAPH_M_RAM__SIZE_1 16 /* */ -#define NV_PGRAPH_M_RAM_VALUE 31:6 /* RWXFF */ -#define NV_PGRAPH_DMA_START_0 0x00401000 /* RW-4R */ -#define NV_PGRAPH_DMA_START_0_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_START_1 0x00401004 /* RW-4R */ -#define NV_PGRAPH_DMA_START_1_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_LENGTH 0x00401008 /* RW-4R */ -#define NV_PGRAPH_DMA_LENGTH_VALUE 21:0 /* RWXUF */ -#define NV_PGRAPH_DMA_MISC 0x0040100C /* RW-4R */ -#define NV_PGRAPH_DMA_MISC_COUNT 15:0 /* RWXUF */ -#define NV_PGRAPH_DMA_MISC_FMT_SRC 18:16 /* RWXVF */ -#define NV_PGRAPH_DMA_MISC_FMT_DST 22:20 /* RWXVF */ -#define NV_PGRAPH_DMA_DATA_0 0x00401020 /* RW-4R */ -#define NV_PGRAPH_DMA_DATA_0_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_DATA_1 0x00401024 /* RW-4R */ -#define NV_PGRAPH_DMA_DATA_1_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_RM 0x00401030 /* RW-4R */ -#define NV_PGRAPH_DMA_RM_ASSIST_A 0:0 /* RWIVF */ -#define NV_PGRAPH_DMA_RM_ASSIST_A_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_DMA_RM_ASSIST_A_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_DMA_RM_ASSIST_A_RESET 0x00000001 /* -W--C */ -#define NV_PGRAPH_DMA_RM_ASSIST_B 1:1 /* RWIVF */ -#define NV_PGRAPH_DMA_RM_ASSIST_B_NOT_PENDING 0x00000000 /* R-I-V */ -#define NV_PGRAPH_DMA_RM_ASSIST_B_PENDING 0x00000001 /* R---V */ -#define NV_PGRAPH_DMA_RM_ASSIST_B_RESET 0x00000001 /* -W--C */ -#define NV_PGRAPH_DMA_RM_WRITE_REQ 4:4 /* CWIVF */ -#define NV_PGRAPH_DMA_RM_WRITE_REQ_NOT_PENDING 0x00000000 /* CWI-V */ -#define NV_PGRAPH_DMA_RM_WRITE_REQ_PENDING 0x00000001 /* -W--T */ -#define NV_PGRAPH_DMA_A_XLATE_INST 0x00401040 /* RW-4R */ -#define NV_PGRAPH_DMA_A_XLATE_INST_VALUE 15:0 /* RWXUF */ -#define NV_PGRAPH_DMA_A_CONTROL 0x00401044 /* RW-4R */ -#define NV_PGRAPH_DMA_A_CONTROL_PAGE_TABLE 12:12 /* RWIVF */ -#define NV_PGRAPH_DMA_A_CONTROL_PAGE_TABLE_NOT_PRESENT 0x00000000 /* RWI-V */ -#define NV_PGRAPH_DMA_A_CONTROL_PAGE_TABLE_PRESENT 0x00000001 /* RW--V */ -#define NV_PGRAPH_DMA_A_CONTROL_PAGE_ENTRY 13:13 /* RWXVF */ -#define NV_PGRAPH_DMA_A_CONTROL_PAGE_ENTRY_NOT_LINEAR 0x00000000 /* RW--V */ -#define NV_PGRAPH_DMA_A_CONTROL_PAGE_ENTRY_LINEAR 0x00000001 /* RW--V */ -#define NV_PGRAPH_DMA_A_CONTROL_TARGET_NODE 17:16 /* RWXUF */ -#define NV_PGRAPH_DMA_A_CONTROL_TARGET_NODE_NVM 0x00000000 /* RW--V */ -#define NV_PGRAPH_DMA_A_CONTROL_TARGET_NODE_PCI 0x00000002 /* RW--V */ -#define NV_PGRAPH_DMA_A_CONTROL_TARGET_NODE_AGP 0x00000003 /* RW--V */ -#define NV_PGRAPH_DMA_A_CONTROL_ADJUST 31:20 /* RWXUF */ -#define NV_PGRAPH_DMA_A_LIMIT 0x00401048 /* RW-4R */ -#define NV_PGRAPH_DMA_A_LIMIT_OFFSET 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_A_TLB_PTE 0x0040104C /* RW-4R */ -#define NV_PGRAPH_DMA_A_TLB_PTE_ACCESS 1:1 /* RWXVF */ -#define NV_PGRAPH_DMA_A_TLB_PTE_ACCESS_READ_ONLY 0x00000000 /* RW--V */ -#define NV_PGRAPH_DMA_A_TLB_PTE_ACCESS_READ_WRITE 0x00000001 /* RW--V */ -#define NV_PGRAPH_DMA_A_TLB_PTE_FRAME_ADDRESS 31:12 /* RWXUF */ -#define NV_PGRAPH_DMA_A_TLB_TAG 0x00401050 /* RW-4R */ -#define NV_PGRAPH_DMA_A_TLB_TAG_ADDRESS 31:12 /* RWXUF */ -#define NV_PGRAPH_DMA_A_ADJ_OFFSET 0x00401054 /* RW-4R */ -#define NV_PGRAPH_DMA_A_ADJ_OFFSET_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_A_OFFSET 0x00401058 /* RW-4R */ -#define NV_PGRAPH_DMA_A_OFFSET_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_A_SIZE 0x0040105C /* RW-4R */ -#define NV_PGRAPH_DMA_A_SIZE_VALUE 24:0 /* RWXUF */ -#define NV_PGRAPH_DMA_A_Y_SIZE 0x00401060 /* RW-4R */ -#define NV_PGRAPH_DMA_A_Y_SIZE_VALUE 10:0 /* RWXUF */ -#define NV_PGRAPH_DMA_B_XLATE_INST 0x00401080 /* RW-4R */ -#define NV_PGRAPH_DMA_B_XLATE_INST_VALUE 15:0 /* RWXUF */ -#define NV_PGRAPH_DMA_B_CONTROL 0x00401084 /* RW-4R */ -#define NV_PGRAPH_DMA_B_CONTROL_PAGE_TABLE 12:12 /* RWIVF */ -#define NV_PGRAPH_DMA_B_CONTROL_PAGE_TABLE_NOT_PRESENT 0x00000000 /* RWI-V */ -#define NV_PGRAPH_DMA_B_CONTROL_PAGE_TABLE_PRESENT 0x00000001 /* RW--V */ -#define NV_PGRAPH_DMA_B_CONTROL_PAGE_ENTRY 13:13 /* RWXVF */ -#define NV_PGRAPH_DMA_B_CONTROL_PAGE_ENTRY_NOT_LINEAR 0x00000000 /* RW--V */ -#define NV_PGRAPH_DMA_B_CONTROL_PAGE_ENTRY_LINEAR 0x00000001 /* RW--V */ -#define NV_PGRAPH_DMA_B_CONTROL_TARGET_NODE 17:16 /* RWXUF */ -#define NV_PGRAPH_DMA_B_CONTROL_TARGET_NODE_NVM 0x00000000 /* RW--V */ -#define NV_PGRAPH_DMA_B_CONTROL_TARGET_NODE_PCI 0x00000002 /* RW--V */ -#define NV_PGRAPH_DMA_B_CONTROL_TARGET_NODE_AGP 0x00000003 /* RW--V */ -#define NV_PGRAPH_DMA_B_CONTROL_ADJUST 31:20 /* RWXUF */ -#define NV_PGRAPH_DMA_B_LIMIT 0x00401088 /* RW-4R */ -#define NV_PGRAPH_DMA_B_LIMIT_OFFSET 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_B_TLB_PTE 0x0040108C /* RW-4R */ -#define NV_PGRAPH_DMA_B_TLB_PTE_ACCESS 1:1 /* RWXVF */ -#define NV_PGRAPH_DMA_B_TLB_PTE_ACCESS_READ_ONLY 0x00000000 /* RW--V */ -#define NV_PGRAPH_DMA_B_TLB_PTE_ACCESS_READ_WRITE 0x00000001 /* RW--V */ -#define NV_PGRAPH_DMA_B_TLB_PTE_FRAME_ADDRESS 31:12 /* RWXUF */ -#define NV_PGRAPH_DMA_B_TLB_TAG 0x00401090 /* RW-4R */ -#define NV_PGRAPH_DMA_B_TLB_TAG_ADDRESS 31:12 /* RWXUF */ -#define NV_PGRAPH_DMA_B_ADJ_OFFSET 0x00401094 /* RW-4R */ -#define NV_PGRAPH_DMA_B_ADJ_OFFSET_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_B_OFFSET 0x00401098 /* RW-4R */ -#define NV_PGRAPH_DMA_B_OFFSET_VALUE 31:0 /* RWXUF */ -#define NV_PGRAPH_DMA_B_SIZE 0x0040109C /* RW-4R */ -#define NV_PGRAPH_DMA_B_SIZE_VALUE 24:0 /* RWXUF */ -#define NV_PGRAPH_DMA_B_Y_SIZE 0x004010A0 /* RW-4R */ -#define NV_PGRAPH_DMA_B_Y_SIZE_VALUE 10:0 /* RWXUF */ - -/* Framebuffer registers */ -#define NV_PFB 0x00100FFF:0x00100000 /* RW--D */ -#define NV_PFB_BOOT_0 0x00100000 /* RW-4R */ -#define NV_PFB_BOOT_0_RAM_AMOUNT 1:0 /* RW-VF */ -#define NV_PFB_BOOT_0_RAM_AMOUNT_32MB 0x00000000 /* RW--V */ -#define NV_PFB_BOOT_0_RAM_AMOUNT_4MB 0x00000001 /* RW--V */ -#define NV_PFB_BOOT_0_RAM_AMOUNT_8MB 0x00000002 /* RW--V */ -#define NV_PFB_BOOT_0_RAM_AMOUNT_16MB 0x00000003 /* RW--V */ -#define NV_PFB_BOOT_0_RAM_WIDTH_128 2:2 /* RW-VF */ -#define NV_PFB_BOOT_0_RAM_WIDTH_128_OFF 0x00000000 /* RW--V */ -#define NV_PFB_BOOT_0_RAM_WIDTH_128_ON 0x00000001 /* RW--V */ -#define NV_PFB_BOOT_0_RAM_TYPE 4:3 /* RW-VF */ -#define NV_PFB_BOOT_0_RAM_TYPE_256K 0x00000000 /* RW--V */ -#define NV_PFB_BOOT_0_RAM_TYPE_512K_2BANK 0x00000001 /* RW--V */ -#define NV_PFB_BOOT_0_RAM_TYPE_512K_4BANK 0x00000002 /* RW--V */ -#define NV_PFB_BOOT_0_RAM_TYPE_1024K_2BANK 0x00000003 /* RW--V */ -#define NV_PFB_CONFIG_0 0x00100200 /* RW-4R */ -#define NV_PFB_CONFIG_0_TYPE 14:0 /* RWIVF */ -#define NV_PFB_CONFIG_0_TYPE_OLD1024_FIXED_8BPP 0x00000120 /* RW--V */ -#define NV_PFB_CONFIG_0_TYPE_OLD1024_FIXED_16BPP 0x00000220 /* RW--V */ -#define NV_PFB_CONFIG_0_TYPE_OLD1024_FIXED_32BPP 0x00000320 /* RW--V */ -#define NV_PFB_CONFIG_0_TYPE_OLD1024_VAR_8BPP 0x00004120 /* RW--V */ -#define NV_PFB_CONFIG_0_TYPE_OLD1024_VAR_16BPP 0x00004220 /* RW--V */ -#define NV_PFB_CONFIG_0_TYPE_OLD1024_VAR_32BPP 0x00004320 /* RW--V */ -#define NV_PFB_CONFIG_0_TYPE_TETRIS 0x00002000 /* RW--V */ -#define NV_PFB_CONFIG_0_TYPE_NOTILING 0x00001114 /* RWI-V */ -#define NV_PFB_CONFIG_0_TETRIS_MODE 17:15 /* RWI-F */ -#define NV_PFB_CONFIG_0_TETRIS_MODE_PASS 0x00000000 /* RWI-V */ -#define NV_PFB_CONFIG_0_TETRIS_MODE_1 0x00000001 /* RW--V */ -#define NV_PFB_CONFIG_0_TETRIS_MODE_2 0x00000002 /* RW--V */ -#define NV_PFB_CONFIG_0_TETRIS_MODE_3 0x00000003 /* RW--V */ -#define NV_PFB_CONFIG_0_TETRIS_MODE_4 0x00000004 /* RW--V */ -#define NV_PFB_CONFIG_0_TETRIS_MODE_5 0x00000005 /* RW--V */ -#define NV_PFB_CONFIG_0_TETRIS_MODE_6 0x00000006 /* RW--V */ -#define NV_PFB_CONFIG_0_TETRIS_MODE_7 0x00000007 /* RW--V */ -#define NV_PFB_CONFIG_0_TETRIS_SHIFT 19:18 /* RWI-F */ -#define NV_PFB_CONFIG_0_TETRIS_SHIFT_0 0x00000000 /* RWI-V */ -#define NV_PFB_CONFIG_0_TETRIS_SHIFT_1 0x00000001 /* RW--V */ -#define NV_PFB_CONFIG_0_TETRIS_SHIFT_2 0x00000002 /* RW--V */ -#define NV_PFB_CONFIG_0_BANK_SWAP 22:20 /* RWI-F */ -#define NV_PFB_CONFIG_0_BANK_SWAP_OFF 0x00000000 /* RWI-V */ -#define NV_PFB_CONFIG_0_BANK_SWAP_1M 0x00000001 /* RW--V */ -#define NV_PFB_CONFIG_0_BANK_SWAP_2M 0x00000005 /* RW--V */ -#define NV_PFB_CONFIG_0_BANK_SWAP_4M 0x00000007 /* RW--V */ -#define NV_PFB_CONFIG_0_UNUSED 23:23 /* RW-VF */ -#define NV_PFB_CONFIG_0_SCRAMBLE_EN 29:29 /* RWIVF */ -#define NV_PFB_CONFIG_0_SCRAMBLE_EN_INIT 0x00000000 /* RW--V */ -#define NV_PFB_CONFIG_0_SCRAMBLE_ACTIVE 0x00000001 /* RW--V */ -#define NV_PFB_CONFIG_0_PRAMIN_WR 28:28 /* RWIVF */ -#define NV_PFB_CONFIG_0_PRAMIN_WR_INIT 0x00000000 /* RW--V */ -#define NV_PFB_CONFIG_0_PRAMIN_WR_DISABLED 0x00000001 /* RW--V */ -#define NV_PFB_CONFIG_0_PRAMIN_WR_MASK 27:24 /* RWIVF */ -#define NV_PFB_CONFIG_0_PRAMIN_WR_MASK_INIT 0x00000000 /* RWI-V */ -#define NV_PFB_CONFIG_0_PRAMIN_WR_MASK_CLEAR 0x0000000f /* RWI-V */ -#define NV_PFB_CONFIG_1 0x00100204 /* RW-4R */ -#define NV_PFB_RTL 0x00100300 /* RW-4R */ -#define NV_PFB_RTL_H 0:0 /* RWIUF */ -#define NV_PFB_RTL_H_DEFAULT 0x00000000 /* RWI-V */ -#define NV_PFB_RTL_MC 1:1 /* RWIUF */ -#define NV_PFB_RTL_MC_DEFAULT 0x00000000 /* RWI-V */ -#define NV_PFB_RTL_V 2:2 /* RWIUF */ -#define NV_PFB_RTL_V_DEFAULT 0x00000000 /* RWI-V */ -#define NV_PFB_RTL_G 3:3 /* RWIUF */ -#define NV_PFB_RTL_G_DEFAULT 0x00000000 /* RWI-V */ -#define NV_PFB_RTL_GB 4:4 /* RWIUF */ -#define NV_PFB_RTL_GB_DEFAULT 0x00000000 /* RWI-V */ -#define NV_PFB_CONFIG_0_RESOLUTION 5:0 /* RWIVF */ -#define NV_PFB_CONFIG_0_RESOLUTION_320_PIXELS 0x0000000a /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_400_PIXELS 0x0000000d /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_480_PIXELS 0x0000000f /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_512_PIXELS 0x00000010 /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_640_PIXELS 0x00000014 /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_800_PIXELS 0x00000019 /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_960_PIXELS 0x0000001e /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_1024_PIXELS 0x00000020 /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_1152_PIXELS 0x00000024 /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_1280_PIXELS 0x00000028 /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_1600_PIXELS 0x00000032 /* RW--V */ -#define NV_PFB_CONFIG_0_RESOLUTION_DEFAULT 0x00000014 /* RWI-V */ -#define NV_PFB_CONFIG_0_PIXEL_DEPTH 9:8 /* RWIVF */ -#define NV_PFB_CONFIG_0_PIXEL_DEPTH_8_BITS 0x00000001 /* RW--V */ -#define NV_PFB_CONFIG_0_PIXEL_DEPTH_16_BITS 0x00000002 /* RW--V */ -#define NV_PFB_CONFIG_0_PIXEL_DEPTH_32_BITS 0x00000003 /* RW--V */ -#define NV_PFB_CONFIG_0_PIXEL_DEPTH_DEFAULT 0x00000001 /* RWI-V */ -#define NV_PFB_CONFIG_0_TILING 12:12 /* RWIVF */ -#define NV_PFB_CONFIG_0_TILING_ENABLED 0x00000000 /* RW--V */ -#define NV_PFB_CONFIG_0_TILING_DISABLED 0x00000001 /* RWI-V */ -#define NV_PFB_CONFIG_1_SGRAM100 3:3 /* RWIVF */ -#define NV_PFB_CONFIG_1_SGRAM100_ENABLED 0x00000000 /* RWI-V */ -#define NV_PFB_CONFIG_1_SGRAM100_DISABLED 0x00000001 /* RW--V */ -#define NV_PFB_DEBUG_0_CKE_ALWAYSON 29:29 /* RWIVF */ -#define NV_PFB_DEBUG_0_CKE_ALWAYSON_OFF 0x00000000 /* RW--V */ -#define NV_PFB_DEBUG_0_CKE_ALWAYSON_ON 0x00000001 /* RWI-V */ - -#define NV_PEXTDEV 0x00101FFF:0x00101000 /* RW--D */ -#define NV_PEXTDEV_BOOT_0 0x00101000 /* R--4R */ -#define NV_PEXTDEV_BOOT_0_STRAP_BUS_SPEED 0:0 /* R-XVF */ -#define NV_PEXTDEV_BOOT_0_STRAP_BUS_SPEED_33MHZ 0x00000000 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_BUS_SPEED_66MHZ 0x00000001 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_SUB_VENDOR 1:1 /* R-XVF */ -#define NV_PEXTDEV_BOOT_0_STRAP_SUB_VENDOR_NO_BIOS 0x00000000 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_SUB_VENDOR_BIOS 0x00000001 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_RAM_TYPE 3:2 /* R-XVF */ -#define NV_PEXTDEV_BOOT_0_STRAP_RAM_TYPE_SGRAM_256K 0x00000000 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_RAM_TYPE_SGRAM_512K_2BANK 0x00000001 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_RAM_TYPE_SGRAM_512K_4BANK 0x00000002 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_RAM_TYPE_1024K_2BANK 0x00000003 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_RAM_WIDTH 4:4 /* R-XVF */ -#define NV_PEXTDEV_BOOT_0_STRAP_RAM_WIDTH_64 0x00000000 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_RAM_WIDTH_128 0x00000001 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_BUS_TYPE 5:5 /* R-XVF */ -#define NV_PEXTDEV_BOOT_0_STRAP_BUS_TYPE_PCI 0x00000000 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_BUS_TYPE_AGP 0x00000001 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_CRYSTAL 6:6 /* R-XVF */ -#define NV_PEXTDEV_BOOT_0_STRAP_CRYSTAL_13500K 0x00000000 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_CRYSTAL_14318180 0x00000001 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_TVMODE 8:7 /* R-XVF */ -#define NV_PEXTDEV_BOOT_0_STRAP_TVMODE_SECAM 0x00000000 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_TVMODE_NTSC 0x00000001 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_TVMODE_PAL 0x00000002 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_TVMODE_DISABLED 0x00000003 /* R---V */ -#define NV_PEXTDEV_BOOT_0_STRAP_OVERWRITE 11:11 /* RWIVF */ -#define NV_PEXTDEV_BOOT_0_STRAP_OVERWRITE_DISABLED 0x00000000 /* RWI-V */ -#define NV_PEXTDEV_BOOT_0_STRAP_OVERWRITE_ENABLED 0x00000001 /* RW--V */ - -/* Extras */ -#define NV_PRAMIN 0x007FFFFF:0x00700000 /* RW--M */ -/*#define NV_PRAMIN 0x00FFFFFF:0x00C00000*/ -#define NV_PNVM 0x01FFFFFF:0x01000000 /* RW--M */ -/*#define NV_PNVM 0x00BFFFFF:0x00800000*/ -#define NV_CHAN0 0x0080ffff:0x00800000 - -/* FIFO subchannels */ -#define NV_UROP 0x43 -#define NV_UCHROMA 0x57 -#define NV_UCLIP 0x19 -#define NV_UPATT 0x18 -#define NV_ULIN 0x5C -#define NV_UTRI 0x5D -#define NV_URECT 0x5E -#define NV_UBLIT 0x5F -#define NV_UGLYPH 0x4B - -#endif /*__NV4REF_H__*/ - diff --git a/drivers/video/riva/nv_driver.c b/drivers/video/riva/nv_driver.c index be630a0ccfd4..a11026812d1b 100644 --- a/drivers/video/riva/nv_driver.c +++ b/drivers/video/riva/nv_driver.c @@ -231,12 +231,14 @@ unsigned long riva_get_memlen(struct riva_par *par) case NV_ARCH_30: if(chipset == NV_CHIP_IGEFORCE2) { - dev = pci_find_slot(0, 1); + dev = pci_get_bus_and_slot(0, 1); pci_read_config_dword(dev, 0x7C, &amt); + pci_dev_put(dev); memlen = (((amt >> 6) & 31) + 1) * 1024; } else if (chipset == NV_CHIP_0x01F0) { - dev = pci_find_slot(0, 1); + dev = pci_get_bus_and_slot(0, 1); pci_read_config_dword(dev, 0x84, &amt); + pci_dev_put(dev); memlen = (((amt >> 4) & 127) + 1) * 1024; } else { switch ((NV_RD32(chip->PFB, 0x0000020C) >> 20) & diff --git a/drivers/video/riva/riva_hw.c b/drivers/video/riva/riva_hw.c index e0b8c521cc9c..70bfd78eca81 100644 --- a/drivers/video/riva/riva_hw.c +++ b/drivers/video/riva/riva_hw.c @@ -1118,8 +1118,9 @@ static void nForceUpdateArbitrationSettings unsigned int uMClkPostDiv; struct pci_dev *dev; - dev = pci_find_slot(0, 3); + dev = pci_get_bus_and_slot(0, 3); pci_read_config_dword(dev, 0x6C, &uMClkPostDiv); + pci_dev_put(dev); uMClkPostDiv = (uMClkPostDiv >> 8) & 0xf; if(!uMClkPostDiv) uMClkPostDiv = 4; @@ -1132,8 +1133,9 @@ static void nForceUpdateArbitrationSettings sim_data.enable_video = 0; sim_data.enable_mp = 0; - dev = pci_find_slot(0, 1); + dev = pci_get_bus_and_slot(0, 1); pci_read_config_dword(dev, 0x7C, &sim_data.memory_type); + pci_dev_put(dev); sim_data.memory_type = (sim_data.memory_type >> 12) & 1; sim_data.memory_width = 64; @@ -2112,12 +2114,14 @@ static void nv10GetConfig * Fill in chip configuration. */ if(chipset == NV_CHIP_IGEFORCE2) { - dev = pci_find_slot(0, 1); + dev = pci_get_bus_and_slot(0, 1); pci_read_config_dword(dev, 0x7C, &amt); + pci_dev_put(dev); chip->RamAmountKBytes = (((amt >> 6) & 31) + 1) * 1024; } else if(chipset == NV_CHIP_0x01F0) { - dev = pci_find_slot(0, 1); + dev = pci_get_bus_and_slot(0, 1); pci_read_config_dword(dev, 0x84, &amt); + pci_dev_put(dev); chip->RamAmountKBytes = (((amt >> 4) & 127) + 1) * 1024; } else { switch ((NV_RD32(chip->PFB, 0x0000020C) >> 20) & 0x000000FF) diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c index 0405e839ff93..76e6ce353c8e 100644 --- a/drivers/video/riva/rivafb-i2c.c +++ b/drivers/video/riva/rivafb-i2c.c @@ -88,13 +88,16 @@ static int riva_gpio_getsda(void* data) return val; } -static int riva_setup_i2c_bus(struct riva_i2c_chan *chan, const char *name) +static int __devinit riva_setup_i2c_bus(struct riva_i2c_chan *chan, + const char *name, + unsigned int i2c_class) { int rc; strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; chan->adapter.id = I2C_HW_B_RIVA; + chan->adapter.class = i2c_class; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pdev->dev; chan->algo.setsda = riva_gpio_setsda; @@ -124,42 +127,38 @@ static int riva_setup_i2c_bus(struct riva_i2c_chan *chan, const char *name) return rc; } -void riva_create_i2c_busses(struct riva_par *par) +void __devinit riva_create_i2c_busses(struct riva_par *par) { - par->bus = 3; - par->chan[0].par = par; par->chan[1].par = par; par->chan[2].par = par; - par->chan[0].ddc_base = 0x3e; - par->chan[1].ddc_base = 0x36; + par->chan[0].ddc_base = 0x36; + par->chan[1].ddc_base = 0x3e; par->chan[2].ddc_base = 0x50; - riva_setup_i2c_bus(&par->chan[0], "BUS1"); - riva_setup_i2c_bus(&par->chan[1], "BUS2"); - riva_setup_i2c_bus(&par->chan[2], "BUS3"); + riva_setup_i2c_bus(&par->chan[0], "BUS1", I2C_CLASS_HWMON); + riva_setup_i2c_bus(&par->chan[1], "BUS2", 0); + riva_setup_i2c_bus(&par->chan[2], "BUS3", 0); } void riva_delete_i2c_busses(struct riva_par *par) { - if (par->chan[0].par) - i2c_del_adapter(&par->chan[0].adapter); - par->chan[0].par = NULL; - - if (par->chan[1].par) - i2c_del_adapter(&par->chan[1].adapter); - par->chan[1].par = NULL; + int i; - if (par->chan[2].par) - i2c_del_adapter(&par->chan[2].adapter); - par->chan[2].par = NULL; + for (i = 0; i < 3; i++) { + if (!par->chan[i].par) + continue; + i2c_del_adapter(&par->chan[i].adapter); + par->chan[i].par = NULL; + } } -int riva_probe_i2c_connector(struct riva_par *par, int conn, u8 **out_edid) +int __devinit riva_probe_i2c_connector(struct riva_par *par, int conn, u8 **out_edid) { u8 *edid = NULL; - edid = fb_ddc_read(&par->chan[conn-1].adapter); + if (par->chan[conn].par) + edid = fb_ddc_read(&par->chan[conn].adapter); if (out_edid) *out_edid = edid; diff --git a/drivers/video/riva/rivafb.h b/drivers/video/riva/rivafb.h index 48ead6d72f24..d9f107b704c6 100644 --- a/drivers/video/riva/rivafb.h +++ b/drivers/video/riva/rivafb.h @@ -4,7 +4,6 @@ #include <linux/fb.h> #include <video/vga.h> #include <linux/i2c.h> -#include <linux/i2c-id.h> #include <linux/i2c-algo-bit.h> #include "riva_hw.h" @@ -61,7 +60,6 @@ struct riva_par { Bool SecondCRTC; int FlatPanel; struct pci_dev *pdev; - int bus; int cursor_reset; #ifdef CONFIG_MTRR struct { int vram; int vram_valid; } mtrr; diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c index 3091b20124b4..756fafb41d78 100644 --- a/drivers/video/s3fb.c +++ b/drivers/video/s3fb.c @@ -65,7 +65,7 @@ static const struct svga_fb_format s3fb_formats[] = { static const struct svga_pll s3_pll = {3, 129, 3, 33, 0, 3, - 60000, 240000, 14318}; + 35000, 240000, 14318}; static const int s3_memsizes[] = {4096, 0, 3072, 8192, 2048, 6144, 1024, 512}; @@ -164,7 +164,7 @@ MODULE_PARM_DESC(fasttext, "Enable S3 fast text mode (1=enable, 0=disable, defau static void s3fb_settile_fast(struct fb_info *info, struct fb_tilemap *map) { const u8 *font = map->data; - u8* fb = (u8 *) info->screen_base; + u8 __iomem *fb = (u8 __iomem *) info->screen_base; int i, c; if ((map->width != 8) || (map->height != 16) || @@ -177,20 +177,19 @@ static void s3fb_settile_fast(struct fb_info *info, struct fb_tilemap *map) fb += 2; for (i = 0; i < map->height; i++) { for (c = 0; c < map->length; c++) { - fb[c * 4] = font[c * map->height + i]; + fb_writeb(font[c * map->height + i], fb + c * 4); } fb += 1024; } } - - static struct fb_tile_ops s3fb_tile_ops = { .fb_settile = svga_settile, .fb_tilecopy = svga_tilecopy, .fb_tilefill = svga_tilefill, .fb_tileblit = svga_tileblit, .fb_tilecursor = svga_tilecursor, + .fb_get_tilemax = svga_get_tilemax, }; static struct fb_tile_ops s3fb_fast_tile_ops = { @@ -199,6 +198,7 @@ static struct fb_tile_ops s3fb_fast_tile_ops = { .fb_tilefill = svga_tilefill, .fb_tileblit = svga_tileblit, .fb_tilecursor = svga_tilecursor, + .fb_get_tilemax = svga_get_tilemax, }; @@ -326,8 +326,13 @@ static void s3_set_pixclock(struct fb_info *info, u32 pixclock) { u16 m, n, r; u8 regval; + int rv; - svga_compute_pll(&s3_pll, 1000000000 / pixclock, &m, &n, &r, info->node); + rv = svga_compute_pll(&s3_pll, 1000000000 / pixclock, &m, &n, &r, info->node); + if (rv < 0) { + printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node); + return; + } /* Set VGA misc register */ regval = vga_r(NULL, VGA_MIS_R); @@ -449,6 +454,10 @@ static int s3fb_set_par(struct fb_info *info) info->flags &= ~FBINFO_MISC_TILEBLITTING; info->tileops = NULL; + /* in 4bpp supports 8p wide tiles only, any tiles otherwise */ + info->pixmap.blit_x = (bpp == 4) ? (1 << (8 - 1)) : (~(u32)0); + info->pixmap.blit_y = ~(u32)0; + offset_value = (info->var.xres_virtual * bpp) / 64; screen_size = info->var.yres_virtual * info->fix.line_length; } else { @@ -458,6 +467,10 @@ static int s3fb_set_par(struct fb_info *info) info->flags |= FBINFO_MISC_TILEBLITTING; info->tileops = fasttext ? &s3fb_fast_tile_ops : &s3fb_tile_ops; + /* supports 8x16 tiles only */ + info->pixmap.blit_x = 1 << (8 - 1); + info->pixmap.blit_y = 1 << (16 - 1); + offset_value = info->var.xres_virtual / 16; screen_size = (info->var.xres_virtual * info->var.yres_virtual) / 64; } @@ -656,7 +669,7 @@ static int s3fb_set_par(struct fb_info *info) value = ((value * hmul) / 8) - 5; vga_wcrt(NULL, 0x3C, (value + 1) / 2); - memset((u8*)info->screen_base, 0x00, screen_size); + memset_io(info->screen_base, 0x00, screen_size); /* Device and screen back on */ svga_wcrt_mask(0x17, 0x80, 0x80); svga_wseq_mask(0x01, 0x00, 0x20); @@ -699,7 +712,7 @@ static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, break; case 16: if (regno >= 16) - return -EINVAL; + return 0; if (fb->var.green.length == 5) ((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) | @@ -712,9 +725,9 @@ static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, case 24: case 32: if (regno >= 16) - return -EINVAL; + return 0; - ((u32*)fb->pseudo_palette)[regno] = ((transp & 0xFF00) << 16) | ((red & 0xFF00) << 8) | + ((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) | (green & 0xFF00) | ((blue & 0xFF00) >> 8); break; default: @@ -767,12 +780,6 @@ static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) unsigned int offset; - /* Validate the offsets */ - if ((var->xoffset + var->xres) > var->xres_virtual) - return -EINVAL; - if ((var->yoffset + var->yres) > var->yres_virtual) - return -EINVAL; - /* Calculate the offset */ if (var->bits_per_pixel == 0) { offset = (var->yoffset / 16) * (var->xres_virtual / 2) + (var->xoffset / 2); @@ -789,6 +796,23 @@ static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) return 0; } +/* Get capabilities of accelerator based on the mode */ + +static void s3fb_get_caps(struct fb_info *info, struct fb_blit_caps *caps, + struct fb_var_screeninfo *var) +{ + if (var->bits_per_pixel == 0) { + /* can only support 256 8x16 bitmap */ + caps->x = 1 << (8 - 1); + caps->y = 1 << (16 - 1); + caps->len = 256; + } else { + caps->x = ~(u32)0; + caps->y = ~(u32)0; + caps->len = ~(u32)0; + } +} + /* ------------------------------------------------------------------------- */ /* Frame buffer operations */ @@ -805,6 +829,7 @@ static struct fb_ops s3fb_ops = { .fb_fillrect = s3fb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = s3fb_imageblit, + .fb_get_caps = s3fb_get_caps, }; /* ------------------------------------------------------------------------- */ @@ -1061,6 +1086,7 @@ static int s3_pci_resume(struct pci_dev* dev) { struct fb_info *info = pci_get_drvdata(dev); struct s3fb_info *par = info->par; + int err; dev_info(&(dev->dev), "resume\n"); @@ -1075,7 +1101,13 @@ static int s3_pci_resume(struct pci_dev* dev) pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); - pci_enable_device(dev); + err = pci_enable_device(dev); + if (err) { + mutex_unlock(&(par->open_lock)); + release_console_sem(); + dev_err(&(dev->dev), "error %d enabling device for resume\n", err); + return err; + } pci_set_master(dev); s3fb_set_par(info); diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c index 8db066ccca6b..35c1ce62b216 100644 --- a/drivers/video/savage/savagefb-i2c.c +++ b/drivers/video/savage/savagefb-i2c.c @@ -41,10 +41,6 @@ #define SAVAGE4_I2C_SCL_IN 0x00000008 #define SAVAGE4_I2C_SDA_IN 0x00000010 -#define SET_CR_IX(base, val) writeb((val), base + 0x8000 + VGA_CR_IX) -#define SET_CR_DATA(base, val) writeb((val), base + 0x8000 + VGA_CR_DATA) -#define GET_CR_DATA(base) readb(base + 0x8000 + VGA_CR_DATA) - static void savage4_gpio_setscl(void *data, int val) { struct savagefb_i2c_chan *chan = data; @@ -92,15 +88,15 @@ static void prosavage_gpio_setscl(void* data, int val) struct savagefb_i2c_chan *chan = data; u32 r; - SET_CR_IX(chan->ioaddr, chan->reg); - r = GET_CR_DATA(chan->ioaddr); + r = VGArCR(chan->reg, chan->par); r |= PROSAVAGE_I2C_ENAB; if (val) { r |= PROSAVAGE_I2C_SCL_OUT; } else { r &= ~PROSAVAGE_I2C_SCL_OUT; } - SET_CR_DATA(chan->ioaddr, r); + + VGAwCR(chan->reg, r, chan->par); } static void prosavage_gpio_setsda(void* data, int val) @@ -108,31 +104,29 @@ static void prosavage_gpio_setsda(void* data, int val) struct savagefb_i2c_chan *chan = data; unsigned int r; - SET_CR_IX(chan->ioaddr, chan->reg); - r = GET_CR_DATA(chan->ioaddr); + r = VGArCR(chan->reg, chan->par); r |= PROSAVAGE_I2C_ENAB; if (val) { r |= PROSAVAGE_I2C_SDA_OUT; } else { r &= ~PROSAVAGE_I2C_SDA_OUT; } - SET_CR_DATA(chan->ioaddr, r); + + VGAwCR(chan->reg, r, chan->par); } static int prosavage_gpio_getscl(void* data) { struct savagefb_i2c_chan *chan = data; - SET_CR_IX(chan->ioaddr, chan->reg); - return (0 != (GET_CR_DATA(chan->ioaddr) & PROSAVAGE_I2C_SCL_IN)); + return (VGArCR(chan->reg, chan->par) & PROSAVAGE_I2C_SCL_IN) ? 1 : 0; } static int prosavage_gpio_getsda(void* data) { struct savagefb_i2c_chan *chan = data; - SET_CR_IX(chan->ioaddr, chan->reg); - return (0 != (GET_CR_DATA(chan->ioaddr) & PROSAVAGE_I2C_SDA_IN)); + return (VGArCR(chan->reg, chan->par) & PROSAVAGE_I2C_SDA_IN) ? 1 : 0; } static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan, diff --git a/drivers/video/savage/savagefb.h b/drivers/video/savage/savagefb.h index e648a6c0f6d9..8bfdfc3c5234 100644 --- a/drivers/video/savage/savagefb.h +++ b/drivers/video/savage/savagefb.h @@ -15,6 +15,8 @@ #include <linux/i2c.h> #include <linux/i2c-id.h> #include <linux/i2c-algo-bit.h> +#include <linux/mutex.h> +#include <video/vga.h> #include "../edid.h" #ifdef SAVAGEFB_DEBUG @@ -189,8 +191,12 @@ struct savagefb_par { struct savagefb_i2c_chan chan; struct savage_reg state; struct savage_reg save; + struct savage_reg initial; + struct vgastate vgastate; + struct mutex open_lock; unsigned char *edid; u32 pseudo_palette[16]; + u32 open_count; int paletteEnabled; int pm_state; int display_type; @@ -203,7 +209,7 @@ struct savagefb_par { int clock[4]; int MCLK, REFCLK, LCDclk; struct { - u8 __iomem *vbase; + void __iomem *vbase; u32 pbase; u32 len; #ifdef CONFIG_MTRR @@ -212,7 +218,7 @@ struct savagefb_par { } video; struct { - volatile u8 __iomem *vbase; + void __iomem *vbase; u32 pbase; u32 len; } mmio; diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index 0166ec2ccf32..3d7507ad55f6 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -1623,8 +1623,46 @@ static void savagefb_restore_state(struct fb_info *info) savagefb_blank(FB_BLANK_UNBLANK, info); } +static int savagefb_open(struct fb_info *info, int user) +{ + struct savagefb_par *par = info->par; + + mutex_lock(&par->open_lock); + + if (!par->open_count) { + memset(&par->vgastate, 0, sizeof(par->vgastate)); + par->vgastate.flags = VGA_SAVE_CMAP | VGA_SAVE_FONTS | + VGA_SAVE_MODE; + par->vgastate.vgabase = par->mmio.vbase + 0x8000; + save_vga(&par->vgastate); + savage_get_default_par(par, &par->initial); + } + + par->open_count++; + mutex_unlock(&par->open_lock); + return 0; +} + +static int savagefb_release(struct fb_info *info, int user) +{ + struct savagefb_par *par = info->par; + + mutex_lock(&par->open_lock); + + if (par->open_count == 1) { + savage_set_default_par(par, &par->initial); + restore_vga(&par->vgastate); + } + + par->open_count--; + mutex_unlock(&par->open_lock); + return 0; +} + static struct fb_ops savagefb_ops = { .owner = THIS_MODULE, + .fb_open = savagefb_open, + .fb_release = savagefb_release, .fb_check_var = savagefb_check_var, .fb_set_par = savagefb_set_par, .fb_setcolreg = savagefb_setcolreg, @@ -2173,6 +2211,7 @@ static int __devinit savagefb_probe(struct pci_dev* dev, if (!info) return -ENOMEM; par = info->par; + mutex_init(&par->open_lock); err = pci_enable_device(dev); if (err) goto failed_enable; diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h index d048bd39961b..c1492782cb18 100644 --- a/drivers/video/sis/osdef.h +++ b/drivers/video/sis/osdef.h @@ -58,9 +58,6 @@ #define SIS_LINUX_KERNEL /* Linux kernel framebuffer */ #undef SIS_XORG_XF86 /* XFree86/X.org */ -#undef SIS_LINUX_KERNEL_24 -#undef SIS_LINUX_KERNEL_26 - #ifdef OutPortByte #undef OutPortByte #endif @@ -100,8 +97,6 @@ #define SIS315H #endif -#define SIS_LINUX_KERNEL_26 - #if !defined(SIS300) && !defined(SIS315H) #warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set #warning sisfb will not work! diff --git a/drivers/video/sis/sis.h b/drivers/video/sis/sis.h index 7d5ee2145e21..d5e2d9c27847 100644 --- a/drivers/video/sis/sis.h +++ b/drivers/video/sis/sis.h @@ -27,11 +27,7 @@ #include <linux/version.h> #include "osdef.h" -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #include <video/sisfb.h> -#else -#include <linux/sisfb.h> -#endif #include "vgatypes.h" #include "vstruct.h" @@ -40,33 +36,17 @@ #define VER_MINOR 8 #define VER_LEVEL 9 -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #include <linux/spinlock.h> -#define SIS_PCI_GET_CLASS(a, b) pci_get_class(a, b) -#define SIS_PCI_GET_DEVICE(a,b,c) pci_get_device(a,b,c) -#define SIS_PCI_GET_SLOT(a,b) pci_get_slot(a,b) -#define SIS_PCI_PUT_DEVICE(a) pci_dev_put(a) + #ifdef CONFIG_COMPAT #if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,10) #include <linux/ioctl32.h> #define SIS_OLD_CONFIG_COMPAT #else -#include <linux/smp_lock.h> #define SIS_NEW_CONFIG_COMPAT #endif #endif /* CONFIG_COMPAT */ -#else /* 2.4 */ -#define SIS_PCI_GET_CLASS(a, b) pci_find_class(a, b) -#define SIS_PCI_GET_DEVICE(a,b,c) pci_find_device(a,b,c) -#define SIS_PCI_GET_SLOT(a,b) pci_find_slot(a,b) -#define SIS_PCI_PUT_DEVICE(a) -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,19) -#ifdef __x86_64__ /* Shouldn't we check for CONFIG_IA32_EMULATION here? */ -#include <asm/ioctl32.h> -#define SIS_OLD_CONFIG_COMPAT -#endif -#endif -#endif /* 2.4 */ + #if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,8) #define SIS_IOTYPE1 void __iomem #define SIS_IOTYPE2 __iomem @@ -498,26 +478,8 @@ struct sis_video_info { struct fb_var_screeninfo default_var; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) struct fb_fix_screeninfo sisfb_fix; u32 pseudo_palette[17]; -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - struct display sis_disp; - struct display_switch sisfb_sw; - struct { - u16 red, green, blue, pad; - } sis_palette[256]; - union { -#ifdef FBCON_HAS_CFB16 - u16 cfb16[16]; -#endif -#ifdef FBCON_HAS_CFB32 - u32 cfb32[16]; -#endif - } sis_fbcon_cmap; -#endif struct sisfb_monitor { u16 hmin; @@ -538,10 +500,6 @@ struct sis_video_info { int mni; /* Mode number index */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - int currcon; -#endif - unsigned long video_size; unsigned long video_base; unsigned long mmio_size; @@ -578,9 +536,6 @@ struct sis_video_info { int sisfb_tvplug; int sisfb_tvstd; int sisfb_nocrt2rate; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - int sisfb_inverse; -#endif u32 heapstart; /* offset */ SIS_IOTYPE1 *sisfb_heap_start; /* address */ @@ -646,9 +601,7 @@ struct sis_video_info { int modechanged; unsigned char modeprechange; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) u8 sisfb_lastrates[128]; -#endif int newrom; int haveXGIROM; diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 01197d740217..a30e1e13d8be 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -37,7 +37,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> -#include <linux/smp_lock.h> #include <linux/spinlock.h> #include <linux/errno.h> #include <linux/string.h> @@ -1948,7 +1947,7 @@ sisfb_get_northbridge(int basechipid) default: return NULL; } for(i = 0; i < nbridgenum; i++) { - if((pdev = SIS_PCI_GET_DEVICE(PCI_VENDOR_ID_SI, + if((pdev = pci_get_device(PCI_VENDOR_ID_SI, nbridgeids[nbridgeidx+i], NULL))) break; } @@ -4613,9 +4612,9 @@ sisfb_find_host_bridge(struct sis_video_info *ivideo, struct pci_dev *mypdev, unsigned short temp; int ret = 0; - while((pdev = SIS_PCI_GET_CLASS(PCI_CLASS_BRIDGE_HOST, pdev))) { + while((pdev = pci_get_class(PCI_CLASS_BRIDGE_HOST, pdev))) { temp = pdev->vendor; - SIS_PCI_PUT_DEVICE(pdev); + pci_dev_put(pdev); if(temp == pcivendor) { ret = 1; break; @@ -5154,24 +5153,24 @@ sisfb_post_xgi(struct pci_dev *pdev) if(reg & 0x80) v2 |= 0x80; v2 |= 0x01; - if((mypdev = SIS_PCI_GET_DEVICE(PCI_VENDOR_ID_SI, 0x0730, NULL))) { - SIS_PCI_PUT_DEVICE(mypdev); + if((mypdev = pci_get_device(PCI_VENDOR_ID_SI, 0x0730, NULL))) { + pci_dev_put(mypdev); if(((v2 & 0x06) == 2) || ((v2 & 0x06) == 4)) v2 &= 0xf9; v2 |= 0x08; v1 &= 0xfe; } else { - mypdev = SIS_PCI_GET_DEVICE(PCI_VENDOR_ID_SI, 0x0735, NULL); + mypdev = pci_get_device(PCI_VENDOR_ID_SI, 0x0735, NULL); if(!mypdev) - mypdev = SIS_PCI_GET_DEVICE(PCI_VENDOR_ID_SI, 0x0645, NULL); + mypdev = pci_get_device(PCI_VENDOR_ID_SI, 0x0645, NULL); if(!mypdev) - mypdev = SIS_PCI_GET_DEVICE(PCI_VENDOR_ID_SI, 0x0650, NULL); + mypdev = pci_get_device(PCI_VENDOR_ID_SI, 0x0650, NULL); if(mypdev) { pci_read_config_dword(mypdev, 0x94, ®d); regd &= 0xfffffeff; pci_write_config_dword(mypdev, 0x94, regd); v1 &= 0xfe; - SIS_PCI_PUT_DEVICE(mypdev); + pci_dev_put(mypdev); } else if(sisfb_find_host_bridge(ivideo, pdev, PCI_VENDOR_ID_SI)) { v1 &= 0xfe; } else if(sisfb_find_host_bridge(ivideo, pdev, 0x1106) || @@ -5194,13 +5193,13 @@ sisfb_post_xgi(struct pci_dev *pdev) if( (!(v1 & 0x02)) && (v2 & 0x30) && (regd < 0xcf) ) setSISIDXREG(SISCR, 0x5f, 0xf1, 0x01); - if((mypdev = SIS_PCI_GET_DEVICE(0x10de, 0x01e0, NULL))) { + if((mypdev = pci_get_device(0x10de, 0x01e0, NULL))) { /* TODO: set CR5f &0xf1 | 0x01 for version 6570 * of nforce 2 ROM */ if(0) setSISIDXREG(SISCR, 0x5f, 0xf1, 0x01); - SIS_PCI_PUT_DEVICE(mypdev); + pci_dev_put(mypdev); } } @@ -5236,9 +5235,9 @@ sisfb_post_xgi(struct pci_dev *pdev) setSISIDXREG(SISCR, 0x75, 0xe0, bios[0x4ff] & 0x1f); setSISIDXREG(SISCR, 0x76, 0xe0, bios[0x500] & 0x1f); v1 = bios[0x501]; - if((mypdev = SIS_PCI_GET_DEVICE(0x8086, 0x2530, NULL))) { + if((mypdev = pci_get_device(0x8086, 0x2530, NULL))) { v1 = 0xf0; - SIS_PCI_PUT_DEVICE(mypdev); + pci_dev_put(mypdev); } outSISIDXREG(SISCR, 0x77, v1); } @@ -5947,7 +5946,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if(!ivideo->sisvga_enabled) { if(pci_enable_device(pdev)) { - if(ivideo->nbridge) SIS_PCI_PUT_DEVICE(ivideo->nbridge); + if(ivideo->nbridge) pci_dev_put(ivideo->nbridge); pci_set_drvdata(pdev, NULL); kfree(sis_fb_info); return -EIO; @@ -5974,7 +5973,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) "requiring Chrontel/GPIO setup\n", mychswtable[i].vendorName, mychswtable[i].cardName); - ivideo->lpcdev = SIS_PCI_GET_DEVICE(PCI_VENDOR_ID_SI, 0x0008, NULL); + ivideo->lpcdev = pci_get_device(PCI_VENDOR_ID_SI, 0x0008, NULL); break; } i++; @@ -5984,7 +5983,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) #ifdef CONFIG_FB_SIS_315 if((ivideo->chip == SIS_760) && (ivideo->nbridge)) { - ivideo->lpcdev = SIS_PCI_GET_SLOT(ivideo->nbridge->bus, (2 << 3)); + ivideo->lpcdev = pci_get_slot(ivideo->nbridge->bus, (2 << 3)); } #endif @@ -6149,9 +6148,9 @@ error_1: release_mem_region(ivideo->video_base, ivideo->video_size); error_2: release_mem_region(ivideo->mmio_base, ivideo->mmio_size); error_3: vfree(ivideo->bios_abase); if(ivideo->lpcdev) - SIS_PCI_PUT_DEVICE(ivideo->lpcdev); + pci_dev_put(ivideo->lpcdev); if(ivideo->nbridge) - SIS_PCI_PUT_DEVICE(ivideo->nbridge); + pci_dev_put(ivideo->nbridge); pci_set_drvdata(pdev, NULL); if(!ivideo->sisvga_enabled) pci_disable_device(pdev); @@ -6331,70 +6330,6 @@ error_3: vfree(ivideo->bios_abase); sisfb_set_vparms(ivideo); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - - /* ---------------- For 2.4: Now switch the mode ------------------ */ - - printk(KERN_INFO "sisfb: Setting mode %dx%dx%d (%dHz)\n", - ivideo->video_width, ivideo->video_height, ivideo->video_bpp, - ivideo->refresh_rate); - - /* Determine whether or not acceleration is to be - * used. Need to know before pre/post_set_mode() - */ - ivideo->accel = 0; - ivideo->default_var.accel_flags &= ~FB_ACCELF_TEXT; - if(ivideo->sisfb_accel) { - ivideo->accel = -1; - ivideo->default_var.accel_flags |= FB_ACCELF_TEXT; - } - - /* Now switch the mode */ - sisfb_pre_setmode(ivideo); - - if(SiSSetMode(&ivideo->SiS_Pr, ivideo->mode_no) == 0) { - printk(KERN_ERR "sisfb: Fatal error: Setting mode[0x%x] failed\n", - ivideo->mode_no); - ret = -EINVAL; - iounmap(ivideo->mmio_vbase); - goto error_0; - } - - outSISIDXREG(SISSR, IND_SIS_PASSWORD, SIS_PASSWORD); - - sisfb_post_setmode(ivideo); - - /* Maximize regardless of sisfb_max at startup */ - ivideo->default_var.yres_virtual = 32767; - - /* Force reset of x virtual in crtc_to_var */ - ivideo->default_var.xres_virtual = 0; - - /* Copy mode timing to var */ - sisfb_crtc_to_var(ivideo, &ivideo->default_var); - - /* Find out about screen pitch */ - sisfb_calc_pitch(ivideo, &ivideo->default_var); - sisfb_set_pitch(ivideo); - - /* Init the accelerator (does nothing currently) */ - sisfb_initaccel(ivideo); - - /* Init some fbinfo entries */ - sis_fb_info->node = -1; - sis_fb_info->flags = FBINFO_FLAG_DEFAULT; - sis_fb_info->fbops = &sisfb_ops; - sis_fb_info->disp = &ivideo->sis_disp; - sis_fb_info->blank = &sisfb_blank; - sis_fb_info->switch_con = &sisfb_switch; - sis_fb_info->updatevar = &sisfb_update_var; - sis_fb_info->changevar = NULL; - strcpy(sis_fb_info->fontname, sisfb_fontname); - - sisfb_set_disp(-1, &ivideo->default_var, sis_fb_info); - -#else /* --------- For 2.6: Setup a somewhat sane default var ------------ */ - printk(KERN_INFO "sisfb: Default mode is %dx%dx%d (%dHz)\n", ivideo->video_width, ivideo->video_height, ivideo->video_bpp, ivideo->refresh_rate); @@ -6454,7 +6389,6 @@ error_3: vfree(ivideo->bios_abase); sis_fb_info->pseudo_palette = ivideo->pseudo_palette; fb_alloc_cmap(&sis_fb_info->cmap, 256 , 0); -#endif /* 2.6 */ printk(KERN_DEBUG "sisfb: Initial vbflags 0x%x\n", (int)ivideo->vbflags); @@ -6564,10 +6498,10 @@ static void __devexit sisfb_remove(struct pci_dev *pdev) vfree(ivideo->bios_abase); if(ivideo->lpcdev) - SIS_PCI_PUT_DEVICE(ivideo->lpcdev); + pci_dev_put(ivideo->lpcdev); if(ivideo->nbridge) - SIS_PCI_PUT_DEVICE(ivideo->nbridge); + pci_dev_put(ivideo->nbridge); #ifdef CONFIG_MTRR /* Release MTRR region */ diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c index bb96cb65fdaa..842b5cd054c6 100644 --- a/drivers/video/skeletonfb.c +++ b/drivers/video/skeletonfb.c @@ -51,6 +51,7 @@ #include <linux/delay.h> #include <linux/fb.h> #include <linux/init.h> +#include <linux/pci.h> /* * This is just simple sample code. @@ -60,6 +61,11 @@ */ /* + * Driver data + */ +static char *mode_option __devinitdata; + +/* * If your driver supports multiple boards, you should make the * below data types arrays, or allocate them dynamically (using kmalloc()). */ @@ -78,7 +84,7 @@ struct xxx_par; * if we don't use modedb. If we do use modedb see xxxfb_init how to use it * to get a fb_var_screeninfo. Otherwise define a default var as well. */ -static struct fb_fix_screeninfo xxxfb_fix __initdata = { +static struct fb_fix_screeninfo xxxfb_fix __devinitdata = { .id = "FB's name", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, @@ -142,7 +148,7 @@ int xxxfb_setup(char*); * * Returns negative errno on error, or zero on success. */ -static int xxxfb_open(const struct fb_info *info, int user) +static int xxxfb_open(struct fb_info *info, int user) { return 0; } @@ -161,7 +167,7 @@ static int xxxfb_open(const struct fb_info *info, int user) * * Returns negative errno on error, or zero on success. */ -static int xxxfb_release(const struct fb_info *info, int user) +static int xxxfb_release(struct fb_info *info, int user) { return 0; } @@ -278,7 +284,7 @@ static int xxxfb_set_par(struct fb_info *info) */ static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, - const struct fb_info *info) + struct fb_info *info) { if (regno >= 256) /* no. of hw registers */ return -EINVAL; @@ -416,7 +422,7 @@ static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green, * Returns negative errno on error, or zero on success. */ static int xxxfb_pan_display(struct fb_var_screeninfo *var, - const struct fb_info *info) + struct fb_info *info) { /* * If your hardware does not support panning, _do_ _not_ implement this @@ -454,7 +460,7 @@ static int xxxfb_pan_display(struct fb_var_screeninfo *var, * Return !0 for any modes that are unimplemented. * */ -static int xxxfb_blank(int blank_mode, const struct fb_info *info) +static int xxxfb_blank(int blank_mode, struct fb_info *info) { /* ... */ return 0; @@ -483,7 +489,7 @@ static int xxxfb_blank(int blank_mode, const struct fb_info *info) * depending on the rastering operation with the value of color which * is in the current color depth format. */ -void xxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region) +void xxxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region) { /* Meaning of struct fb_fillrect * @@ -623,19 +629,6 @@ void xxxfb_rotate(struct fb_info *info, int angle) } /** - * xxxfb_poll - NOT a required function. The purpose of this - * function is to provide a way for some process - * to wait until a specific hardware event occurs - * for the framebuffer device. - * - * @info: frame buffer structure that represents a single frame buffer - * @wait: poll table where we store process that await a event. - */ -void xxxfb_poll(struct fb_info *info, poll_table *wait) -{ -} - -/** * xxxfb_sync - NOT a required function. Normally the accel engine * for a graphics card take a specific amount of time. * Often we have to wait for the accelerator to finish @@ -647,21 +640,49 @@ void xxxfb_poll(struct fb_info *info, poll_table *wait) * If the driver has implemented its own hardware-based drawing function, * implementing this function is highly recommended. */ -void xxxfb_sync(struct fb_info *info) +int xxxfb_sync(struct fb_info *info) { + return 0; } /* + * Frame buffer operations + */ + +static struct fb_ops xxxfb_ops = { + .owner = THIS_MODULE, + .fb_open = xxxfb_open, + .fb_read = xxxfb_read, + .fb_write = xxxfb_write, + .fb_release = xxxfb_release, + .fb_check_var = xxxfb_check_var, + .fb_set_par = xxxfb_set_par, + .fb_setcolreg = xxxfb_setcolreg, + .fb_blank = xxxfb_blank, + .fb_pan_display = xxxfb_pan_display, + .fb_fillrect = xxxfb_fillrect, /* Needed !!! */ + .fb_copyarea = xxxfb_copyarea, /* Needed !!! */ + .fb_imageblit = xxxfb_imageblit, /* Needed !!! */ + .fb_cursor = xxxfb_cursor, /* Optional !!! */ + .fb_rotate = xxxfb_rotate, + .fb_sync = xxxfb_sync, + .fb_ioctl = xxxfb_ioctl, + .fb_mmap = xxxfb_mmap, +}; + +/* ------------------------------------------------------------------------- */ + + /* * Initialization */ /* static int __init xxfb_probe (struct device *device) -- for platform devs */ -static int __init xxxfb_probe(struct pci_dev *dev, - const_struct pci_device_id *ent) +static int __devinit xxxfb_probe(struct pci_dev *dev, + const struct pci_device_id *ent) { struct fb_info *info; struct xxx_par *par; - struct device = &dev->dev; /* for pci drivers */ + struct device* device = &dev->dev; /* for pci drivers */ int cmap_len, retval; /* @@ -684,7 +705,7 @@ static int __init xxxfb_probe(struct pci_dev *dev, info->screen_base = framebuffer_virtual_memory; info->fbops = &xxxfb_ops; info->fix = xxxfb_fix; /* this will be the only time xxxfb_fix will be - * used, so mark it as __initdata + * used, so mark it as __devinitdata */ info->pseudo_palette = pseudo_palette; /* The pseudopalette is an * 16-member array @@ -760,7 +781,7 @@ static int __init xxxfb_probe(struct pci_dev *dev, * * NOTE: This field is currently unused. */ - info->pixmap.scan_align = 32 + info->pixmap.scan_align = 32; /***************************** End optional stage ***************************/ /* @@ -770,13 +791,13 @@ static int __init xxxfb_probe(struct pci_dev *dev, if (!mode_option) mode_option = "640x480@60"; - retval = fb_find_mode(info->var, info, mode_option, NULL, 0, NULL, 8); + retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8); if (!retval || retval == 4) return -EINVAL; /* This has to been done !!! */ - fb_alloc_cmap(info->cmap, cmap_len, 0); + fb_alloc_cmap(&info->cmap, cmap_len, 0); /* * The following is done in the case of having hardware with a static @@ -811,34 +832,77 @@ static int __init xxxfb_probe(struct pci_dev *dev, /* * Cleanup */ -/* static void __exit xxxfb_remove(struct device *device) */ -static void __exit xxxfb_remove(struct pci_dev *dev) +/* static void __devexit xxxfb_remove(struct device *device) */ +static void __devexit xxxfb_remove(struct pci_dev *dev) { - struct fb_info *info = pci_get_drv_data(dev); - /* or dev_get_drv_data(device); */ + struct fb_info *info = pci_get_drvdata(dev); + /* or dev_get_drvdata(device); */ if (info) { unregister_framebuffer(info); - fb_dealloc_cmap(&info.cmap); + fb_dealloc_cmap(&info->cmap); /* ... */ framebuffer_release(info); } +} + +#ifdef CONFIG_PCI +#ifdef CONFIG_PM +/** + * xxxfb_suspend - Optional but recommended function. Suspend the device. + * @dev: PCI device + * @msg: the suspend event code. + * + * See Documentation/power/devices.txt for more information + */ +static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg) +{ + struct fb_info *info = pci_get_drvdata(dev); + struct xxxfb_par *par = info->par; + + /* suspend here */ + return 0; +} + +/** + * xxxfb_resume - Optional but recommended function. Resume the device. + * @dev: PCI device + * + * See Documentation/power/devices.txt for more information + */ +static int xxxfb_resume(struct pci_dev *dev) +{ + struct fb_info *info = pci_get_drvdata(dev); + struct xxxfb_par *par = info->par; + /* resume here */ return 0; } +#else +#define xxxfb_suspend NULL +#define xxxfb_resume NULL +#endif /* CONFIG_PM */ + +static struct pci_device_id xxxfb_id_table[] = { + { PCI_VENDOR_ID_XXX, PCI_DEVICE_ID_XXX, + PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, + PCI_CLASS_MASK, 0 }, + { 0, } +}; -#if CONFIG_PCI /* For PCI drivers */ static struct pci_driver xxxfb_driver = { .name = "xxxfb", - .id_table = xxxfb_devices, + .id_table = xxxfb_id_table, .probe = xxxfb_probe, .remove = __devexit_p(xxxfb_remove), - .suspend = xxxfb_suspend, /* optional */ - .resume = xxxfb_resume, /* optional */ + .suspend = xxxfb_suspend, /* optional but recommended */ + .resume = xxxfb_resume, /* optional but recommended */ }; -static int __init xxxfb_init(void) +MODULE_DEVICE_TABLE(pci, xxxfb_id_table); + +int __init xxxfb_init(void) { /* * For kernel boot options (in 'video=xxxfb:<options>' format) @@ -858,16 +922,53 @@ static void __exit xxxfb_exit(void) { pci_unregister_driver(&xxxfb_driver); } -#else +#else /* non PCI, platform drivers */ #include <linux/platform_device.h> /* for platform devices */ + +#ifdef CONFIG_PM +/** + * xxxfb_suspend - Optional but recommended function. Suspend the device. + * @dev: platform device + * @msg: the suspend event code. + * + * See Documentation/power/devices.txt for more information + */ +static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg) +{ + struct fb_info *info = platform_get_drvdata(dev); + struct xxxfb_par *par = info->par; + + /* suspend here */ + return 0; +} + +/** + * xxxfb_resume - Optional but recommended function. Resume the device. + * @dev: platform device + * + * See Documentation/power/devices.txt for more information + */ +static int xxxfb_resume(struct platform_dev *dev) +{ + struct fb_info *info = platform_get_drvdata(dev); + struct xxxfb_par *par = info->par; + + /* resume here */ + return 0; +} +#else +#define xxxfb_suspend NULL +#define xxxfb_resume NULL +#endif /* CONFIG_PM */ + static struct device_driver xxxfb_driver = { .name = "xxxfb", .bus = &platform_bus_type, .probe = xxxfb_probe, .remove = xxxfb_remove, - .suspend = xxxfb_suspend, /* optional */ - .resume = xxxfb_resume, /* optional */ + .suspend = xxxfb_suspend, /* optional but recommended */ + .resume = xxxfb_resume, /* optional but recommended */ }; static struct platform_device xxxfb_device = { @@ -903,8 +1004,9 @@ static void __exit xxxfb_exit(void) platform_device_unregister(&xxxfb_device); driver_unregister(&xxxfb_driver); } -#endif +#endif /* CONFIG_PCI */ +#ifdef MODULE /* * Setup */ @@ -917,34 +1019,7 @@ int __init xxxfb_setup(char *options) { /* Parse user speficied options (`video=xxxfb:') */ } - -/* ------------------------------------------------------------------------- */ - - /* - * Frame buffer operations - */ - -static struct fb_ops xxxfb_ops = { - .owner = THIS_MODULE, - .fb_open = xxxfb_open, - .fb_read = xxxfb_read, - .fb_write = xxxfb_write, - .fb_release = xxxfb_release, - .fb_check_var = xxxfb_check_var, - .fb_set_par = xxxfb_set_par, - .fb_setcolreg = xxxfb_setcolreg, - .fb_blank = xxxfb_blank, - .fb_pan_display = xxxfb_pan_display, - .fb_fillrect = xxxfb_fillrect, /* Needed !!! */ - .fb_copyarea = xxxfb_copyarea, /* Needed !!! */ - .fb_imageblit = xxxfb_imageblit, /* Needed !!! */ - .fb_cursor = xxxfb_cursor, /* Optional !!! */ - .fb_rotate = xxxfb_rotate, - .fb_poll = xxxfb_poll, - .fb_sync = xxxfb_sync, - .fb_ioctl = xxxfb_ioctl, - .fb_mmap = xxxfb_mmap, -}; +#endif /* MODULE */ /* ------------------------------------------------------------------------- */ @@ -954,6 +1029,6 @@ static struct fb_ops xxxfb_ops = { */ module_init(xxxfb_init); -module_exit(xxxfb_cleanup); +module_exit(xxxfb_remove); MODULE_LICENSE("GPL"); diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 0a44c44672c8..c86df126f93a 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -989,7 +989,7 @@ static int sm501fb_cursor(struct fb_info *info, struct fb_cursor *cursor) ((info->cmap.green[fg_col] & 0xFC) << 3) | ((info->cmap.blue[fg_col] & 0xF8) >> 3); - dev_dbg(fbi->dev, "fgcol %08x, bgcol %08x\n", fg, bg); + dev_dbg(fbi->dev, "fgcol %08lx, bgcol %08lx\n", fg, bg); writel(bg, base + SM501_OFF_HWC_COLOR_1_2); writel(fg, base + SM501_OFF_HWC_COLOR_3); diff --git a/drivers/video/svgalib.c b/drivers/video/svgalib.c index 68b30d9eac58..079cdc911e48 100644 --- a/drivers/video/svgalib.c +++ b/drivers/video/svgalib.c @@ -194,7 +194,7 @@ void svga_dump_var(struct fb_var_screeninfo *var, int node) void svga_settile(struct fb_info *info, struct fb_tilemap *map) { const u8 *font = map->data; - u8* fb = (u8 *) info->screen_base; + u8 __iomem *fb = (u8 __iomem *)info->screen_base; int i, c; if ((map->width != 8) || (map->height != 16) || @@ -207,7 +207,8 @@ void svga_settile(struct fb_info *info, struct fb_tilemap *map) fb += 2; for (c = 0; c < map->length; c++) { for (i = 0; i < map->height; i++) { - fb[i * 4] = font[i]; + fb_writeb(font[i], fb + i * 4); +// fb[i * 4] = font[i]; } fb += 128; font += map->height; @@ -221,8 +222,8 @@ void svga_tilecopy(struct fb_info *info, struct fb_tilearea *area) /* colstride is halved in this function because u16 are used */ int colstride = 1 << (info->fix.type_aux & FB_AUX_TEXT_SVGA_MASK); int rowstride = colstride * (info->var.xres_virtual / 8); - u16 *fb = (u16 *) info->screen_base; - u16 *src, *dst; + u16 __iomem *fb = (u16 __iomem *) info->screen_base; + u16 __iomem *src, *dst; if ((area->sy > area->dy) || ((area->sy == area->dy) && (area->sx > area->dx))) { @@ -239,10 +240,11 @@ void svga_tilecopy(struct fb_info *info, struct fb_tilearea *area) } for (dy = 0; dy < area->height; dy++) { - u16* src2 = src; - u16* dst2 = dst; + u16 __iomem *src2 = src; + u16 __iomem *dst2 = dst; for (dx = 0; dx < area->width; dx++) { - *dst2 = *src2; + fb_writew(fb_readw(src2), dst2); +// *dst2 = *src2; src2 += colstride; dst2 += colstride; } @@ -258,14 +260,14 @@ void svga_tilefill(struct fb_info *info, struct fb_tilerect *rect) int colstride = 2 << (info->fix.type_aux & FB_AUX_TEXT_SVGA_MASK); int rowstride = colstride * (info->var.xres_virtual / 8); int attr = (0x0F & rect->bg) << 4 | (0x0F & rect->fg); - u8 *fb = (u8 *) info->screen_base; + u8 __iomem *fb = (u8 __iomem *)info->screen_base; fb += rect->sx * colstride + rect->sy * rowstride; for (dy = 0; dy < rect->height; dy++) { - u8* fb2 = fb; + u8 __iomem *fb2 = fb; for (dx = 0; dx < rect->width; dx++) { - fb2[0] = rect->index; - fb2[1] = attr; + fb_writeb(rect->index, fb2); + fb_writeb(attr, fb2 + 1); fb2 += colstride; } fb += rowstride; @@ -279,15 +281,15 @@ void svga_tileblit(struct fb_info *info, struct fb_tileblit *blit) int colstride = 2 << (info->fix.type_aux & FB_AUX_TEXT_SVGA_MASK); int rowstride = colstride * (info->var.xres_virtual / 8); int attr = (0x0F & blit->bg) << 4 | (0x0F & blit->fg); - u8* fb = (u8 *) info->screen_base; + u8 __iomem *fb = (u8 __iomem *)info->screen_base; fb += blit->sx * colstride + blit->sy * rowstride; i=0; for (dy=0; dy < blit->height; dy ++) { - u8* fb2 = fb; + u8 __iomem *fb2 = fb; for (dx = 0; dx < blit->width; dx ++) { - fb2[0] = blit->indices[i]; - fb2[1] = attr; + fb_writeb(blit->indices[i], fb2); + fb_writeb(attr, fb2 + 1); fb2 += colstride; i ++; if (i == blit->length) return; @@ -340,6 +342,11 @@ void svga_tilecursor(struct fb_info *info, struct fb_tilecursor *cursor) vga_wcrt(NULL, 0x0A, cs); /* set cursor start and enable it */ } +int svga_get_tilemax(struct fb_info *info) +{ + return 256; +} + /* ------------------------------------------------------------------------- */ @@ -621,6 +628,7 @@ EXPORT_SYMBOL(svga_tilecopy); EXPORT_SYMBOL(svga_tilefill); EXPORT_SYMBOL(svga_tileblit); EXPORT_SYMBOL(svga_tilecursor); +EXPORT_SYMBOL(svga_get_tilemax); EXPORT_SYMBOL(svga_compute_pll); EXPORT_SYMBOL(svga_check_timings); diff --git a/drivers/video/syscopyarea.c b/drivers/video/syscopyarea.c new file mode 100644 index 000000000000..37af10ab8f52 --- /dev/null +++ b/drivers/video/syscopyarea.c @@ -0,0 +1,378 @@ +/* + * Generic Bit Block Transfer for frame buffers located in system RAM with + * packed pixels of any depth. + * + * Based almost entirely from cfbcopyarea.c (which is based almost entirely + * on Geert Uytterhoeven's copyarea routine) + * + * Copyright (C) 2007 Antonino Daplas <adaplas@pol.net> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/fb.h> +#include <linux/slab.h> +#include <asm/types.h> +#include <asm/io.h> +#include "fb_draw.h" + + /* + * Generic bitwise copy algorithm + */ + +static void +bitcpy(unsigned long *dst, int dst_idx, const unsigned long *src, + int src_idx, int bits, unsigned n) +{ + unsigned long first, last; + int const shift = dst_idx-src_idx; + int left, right; + + first = FB_SHIFT_HIGH(~0UL, dst_idx); + last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits)); + + if (!shift) { + /* Same alignment for source and dest */ + if (dst_idx+n <= bits) { + /* Single word */ + if (last) + first &= last; + *dst = comp(*src, *dst, first); + } else { + /* Multiple destination words */ + /* Leading bits */ + if (first != ~0UL) { + *dst = comp(*src, *dst, first); + dst++; + src++; + n -= bits - dst_idx; + } + + /* Main chunk */ + n /= bits; + while (n >= 8) { + *dst++ = *src++; + *dst++ = *src++; + *dst++ = *src++; + *dst++ = *src++; + *dst++ = *src++; + *dst++ = *src++; + *dst++ = *src++; + *dst++ = *src++; + n -= 8; + } + while (n--) + *dst++ = *src++; + + /* Trailing bits */ + if (last) + *dst = comp(*src, *dst, last); + } + } else { + unsigned long d0, d1; + int m; + + /* Different alignment for source and dest */ + right = shift & (bits - 1); + left = -shift & (bits - 1); + + if (dst_idx+n <= bits) { + /* Single destination word */ + if (last) + first &= last; + if (shift > 0) { + /* Single source word */ + *dst = comp(*src >> right, *dst, first); + } else if (src_idx+n <= bits) { + /* Single source word */ + *dst = comp(*src << left, *dst, first); + } else { + /* 2 source words */ + d0 = *src++; + d1 = *src; + *dst = comp(d0 << left | d1 >> right, *dst, + first); + } + } else { + /* Multiple destination words */ + /** We must always remember the last value read, + because in case SRC and DST overlap bitwise (e.g. + when moving just one pixel in 1bpp), we always + collect one full long for DST and that might + overlap with the current long from SRC. We store + this value in 'd0'. */ + d0 = *src++; + /* Leading bits */ + if (shift > 0) { + /* Single source word */ + *dst = comp(d0 >> right, *dst, first); + dst++; + n -= bits - dst_idx; + } else { + /* 2 source words */ + d1 = *src++; + *dst = comp(d0 << left | *dst >> right, *dst, first); + d0 = d1; + dst++; + n -= bits - dst_idx; + } + + /* Main chunk */ + m = n % bits; + n /= bits; + while (n >= 4) { + d1 = *src++; + *dst++ = d0 << left | d1 >> right; + d0 = d1; + d1 = *src++; + *dst++ = d0 << left | d1 >> right; + d0 = d1; + d1 = *src++; + *dst++ = d0 << left | d1 >> right; + d0 = d1; + d1 = *src++; + *dst++ = d0 << left | d1 >> right; + d0 = d1; + n -= 4; + } + while (n--) { + d1 = *src++; + *dst++ = d0 << left | d1 >> right; + d0 = d1; + } + + /* Trailing bits */ + if (last) { + if (m <= right) { + /* Single source word */ + *dst = comp(d0 << left, *dst, last); + } else { + /* 2 source words */ + d1 = *src; + *dst = comp(d0 << left | d1 >> right, + *dst, last); + } + } + } + } +} + + /* + * Generic bitwise copy algorithm, operating backward + */ + +static void +bitcpy_rev(unsigned long *dst, int dst_idx, const unsigned long *src, + int src_idx, int bits, unsigned n) +{ + unsigned long first, last; + int shift; + + dst += (n-1)/bits; + src += (n-1)/bits; + if ((n-1) % bits) { + dst_idx += (n-1) % bits; + dst += dst_idx >> (ffs(bits) - 1); + dst_idx &= bits - 1; + src_idx += (n-1) % bits; + src += src_idx >> (ffs(bits) - 1); + src_idx &= bits - 1; + } + + shift = dst_idx-src_idx; + + first = FB_SHIFT_LOW(~0UL, bits - 1 - dst_idx); + last = ~(FB_SHIFT_LOW(~0UL, bits - 1 - ((dst_idx-n) % bits))); + + if (!shift) { + /* Same alignment for source and dest */ + if ((unsigned long)dst_idx+1 >= n) { + /* Single word */ + if (last) + first &= last; + *dst = comp(*src, *dst, first); + } else { + /* Multiple destination words */ + + /* Leading bits */ + if (first != ~0UL) { + *dst = comp(*src, *dst, first); + dst--; + src--; + n -= dst_idx+1; + } + + /* Main chunk */ + n /= bits; + while (n >= 8) { + *dst-- = *src--; + *dst-- = *src--; + *dst-- = *src--; + *dst-- = *src--; + *dst-- = *src--; + *dst-- = *src--; + *dst-- = *src--; + *dst-- = *src--; + n -= 8; + } + while (n--) + *dst-- = *src--; + /* Trailing bits */ + if (last) + *dst = comp(*src, *dst, last); + } + } else { + /* Different alignment for source and dest */ + + int const left = -shift & (bits-1); + int const right = shift & (bits-1); + + if ((unsigned long)dst_idx+1 >= n) { + /* Single destination word */ + if (last) + first &= last; + if (shift < 0) { + /* Single source word */ + *dst = comp(*src << left, *dst, first); + } else if (1+(unsigned long)src_idx >= n) { + /* Single source word */ + *dst = comp(*src >> right, *dst, first); + } else { + /* 2 source words */ + *dst = comp(*src >> right | *(src-1) << left, + *dst, first); + } + } else { + /* Multiple destination words */ + /** We must always remember the last value read, + because in case SRC and DST overlap bitwise (e.g. + when moving just one pixel in 1bpp), we always + collect one full long for DST and that might + overlap with the current long from SRC. We store + this value in 'd0'. */ + unsigned long d0, d1; + int m; + + d0 = *src--; + /* Leading bits */ + if (shift < 0) { + /* Single source word */ + *dst = comp(d0 << left, *dst, first); + } else { + /* 2 source words */ + d1 = *src--; + *dst = comp(d0 >> right | d1 << left, *dst, + first); + d0 = d1; + } + dst--; + n -= dst_idx+1; + + /* Main chunk */ + m = n % bits; + n /= bits; + while (n >= 4) { + d1 = *src--; + *dst-- = d0 >> right | d1 << left; + d0 = d1; + d1 = *src--; + *dst-- = d0 >> right | d1 << left; + d0 = d1; + d1 = *src--; + *dst-- = d0 >> right | d1 << left; + d0 = d1; + d1 = *src--; + *dst-- = d0 >> right | d1 << left; + d0 = d1; + n -= 4; + } + while (n--) { + d1 = *src--; + *dst-- = d0 >> right | d1 << left; + d0 = d1; + } + + /* Trailing bits */ + if (last) { + if (m <= left) { + /* Single source word */ + *dst = comp(d0 >> right, *dst, last); + } else { + /* 2 source words */ + d1 = *src; + *dst = comp(d0 >> right | d1 << left, + *dst, last); + } + } + } + } +} + +void sys_copyarea(struct fb_info *p, const struct fb_copyarea *area) +{ + u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy; + u32 height = area->height, width = area->width; + unsigned long const bits_per_line = p->fix.line_length*8u; + unsigned long *dst = NULL, *src = NULL; + int bits = BITS_PER_LONG, bytes = bits >> 3; + int dst_idx = 0, src_idx = 0, rev_copy = 0; + + if (p->state != FBINFO_STATE_RUNNING) + return; + + /* if the beginning of the target area might overlap with the end of + the source area, be have to copy the area reverse. */ + if ((dy == sy && dx > sx) || (dy > sy)) { + dy += height; + sy += height; + rev_copy = 1; + } + + /* split the base of the framebuffer into a long-aligned address and + the index of the first bit */ + dst = src = (unsigned long *)((unsigned long)p->screen_base & + ~(bytes-1)); + dst_idx = src_idx = 8*((unsigned long)p->screen_base & (bytes-1)); + /* add offset of source and target area */ + dst_idx += dy*bits_per_line + dx*p->var.bits_per_pixel; + src_idx += sy*bits_per_line + sx*p->var.bits_per_pixel; + + if (p->fbops->fb_sync) + p->fbops->fb_sync(p); + + if (rev_copy) { + while (height--) { + dst_idx -= bits_per_line; + src_idx -= bits_per_line; + dst += dst_idx >> (ffs(bits) - 1); + dst_idx &= (bytes - 1); + src += src_idx >> (ffs(bits) - 1); + src_idx &= (bytes - 1); + bitcpy_rev(dst, dst_idx, src, src_idx, bits, + width*p->var.bits_per_pixel); + } + } else { + while (height--) { + dst += dst_idx >> (ffs(bits) - 1); + dst_idx &= (bytes - 1); + src += src_idx >> (ffs(bits) - 1); + src_idx &= (bytes - 1); + bitcpy(dst, dst_idx, src, src_idx, bits, + width*p->var.bits_per_pixel); + dst_idx += bits_per_line; + src_idx += bits_per_line; + } + } +} + +EXPORT_SYMBOL(sys_copyarea); + +MODULE_AUTHOR("Antonino Daplas <adaplas@pol.net>"); +MODULE_DESCRIPTION("Generic copyarea (sys-to-sys)"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/video/sysfillrect.c b/drivers/video/sysfillrect.c new file mode 100644 index 000000000000..a261e9e6a675 --- /dev/null +++ b/drivers/video/sysfillrect.c @@ -0,0 +1,334 @@ +/* + * Generic fillrect for frame buffers in system RAM with packed pixels of + * any depth. + * + * Based almost entirely from cfbfillrect.c (which is based almost entirely + * on Geert Uytterhoeven's fillrect routine) + * + * Copyright (C) 2007 Antonino Daplas <adaplas@pol.net> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ +#include <linux/module.h> +#include <linux/string.h> +#include <linux/fb.h> +#include <asm/types.h> +#include "fb_draw.h" + + /* + * Aligned pattern fill using 32/64-bit memory accesses + */ + +static void +bitfill_aligned(unsigned long *dst, int dst_idx, unsigned long pat, + unsigned n, int bits) +{ + unsigned long first, last; + + if (!n) + return; + + first = FB_SHIFT_HIGH(~0UL, dst_idx); + last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits)); + + if (dst_idx+n <= bits) { + /* Single word */ + if (last) + first &= last; + *dst = comp(pat, *dst, first); + } else { + /* Multiple destination words */ + + /* Leading bits */ + if (first!= ~0UL) { + *dst = comp(pat, *dst, first); + dst++; + n -= bits - dst_idx; + } + + /* Main chunk */ + n /= bits; + while (n >= 8) { + *dst++ = pat; + *dst++ = pat; + *dst++ = pat; + *dst++ = pat; + *dst++ = pat; + *dst++ = pat; + *dst++ = pat; + *dst++ = pat; + n -= 8; + } + while (n--) + *dst++ = pat; + /* Trailing bits */ + if (last) + *dst = comp(pat, *dst, last); + } +} + + + /* + * Unaligned generic pattern fill using 32/64-bit memory accesses + * The pattern must have been expanded to a full 32/64-bit value + * Left/right are the appropriate shifts to convert to the pattern to be + * used for the next 32/64-bit word + */ + +static void +bitfill_unaligned(unsigned long *dst, int dst_idx, unsigned long pat, + int left, int right, unsigned n, int bits) +{ + unsigned long first, last; + + if (!n) + return; + + first = FB_SHIFT_HIGH(~0UL, dst_idx); + last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits)); + + if (dst_idx+n <= bits) { + /* Single word */ + if (last) + first &= last; + *dst = comp(pat, *dst, first); + } else { + /* Multiple destination words */ + /* Leading bits */ + if (first) { + *dst = comp(pat, *dst, first); + dst++; + pat = pat << left | pat >> right; + n -= bits - dst_idx; + } + + /* Main chunk */ + n /= bits; + while (n >= 4) { + *dst++ = pat; + pat = pat << left | pat >> right; + *dst++ = pat; + pat = pat << left | pat >> right; + *dst++ = pat; + pat = pat << left | pat >> right; + *dst++ = pat; + pat = pat << left | pat >> right; + n -= 4; + } + while (n--) { + *dst++ = pat; + pat = pat << left | pat >> right; + } + + /* Trailing bits */ + if (last) + *dst = comp(pat, *dst, first); + } +} + + /* + * Aligned pattern invert using 32/64-bit memory accesses + */ +static void +bitfill_aligned_rev(unsigned long *dst, int dst_idx, unsigned long pat, + unsigned n, int bits) +{ + unsigned long val = pat; + unsigned long first, last; + + if (!n) + return; + + first = FB_SHIFT_HIGH(~0UL, dst_idx); + last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits)); + + if (dst_idx+n <= bits) { + /* Single word */ + if (last) + first &= last; + *dst = comp(*dst ^ val, *dst, first); + } else { + /* Multiple destination words */ + /* Leading bits */ + if (first!=0UL) { + *dst = comp(*dst ^ val, *dst, first); + dst++; + n -= bits - dst_idx; + } + + /* Main chunk */ + n /= bits; + while (n >= 8) { + *dst++ ^= val; + *dst++ ^= val; + *dst++ ^= val; + *dst++ ^= val; + *dst++ ^= val; + *dst++ ^= val; + *dst++ ^= val; + *dst++ ^= val; + n -= 8; + } + while (n--) + *dst++ ^= val; + /* Trailing bits */ + if (last) + *dst = comp(*dst ^ val, *dst, last); + } +} + + + /* + * Unaligned generic pattern invert using 32/64-bit memory accesses + * The pattern must have been expanded to a full 32/64-bit value + * Left/right are the appropriate shifts to convert to the pattern to be + * used for the next 32/64-bit word + */ + +static void +bitfill_unaligned_rev(unsigned long *dst, int dst_idx, unsigned long pat, + int left, int right, unsigned n, int bits) +{ + unsigned long first, last; + + if (!n) + return; + + first = FB_SHIFT_HIGH(~0UL, dst_idx); + last = ~(FB_SHIFT_HIGH(~0UL, (dst_idx+n) % bits)); + + if (dst_idx+n <= bits) { + /* Single word */ + if (last) + first &= last; + *dst = comp(*dst ^ pat, *dst, first); + } else { + /* Multiple destination words */ + + /* Leading bits */ + if (first != 0UL) { + *dst = comp(*dst ^ pat, *dst, first); + dst++; + pat = pat << left | pat >> right; + n -= bits - dst_idx; + } + + /* Main chunk */ + n /= bits; + while (n >= 4) { + *dst++ ^= pat; + pat = pat << left | pat >> right; + *dst++ ^= pat; + pat = pat << left | pat >> right; + *dst++ ^= pat; + pat = pat << left | pat >> right; + *dst++ ^= pat; + pat = pat << left | pat >> right; + n -= 4; + } + while (n--) { + *dst ^= pat; + pat = pat << left | pat >> right; + } + + /* Trailing bits */ + if (last) + *dst = comp(*dst ^ pat, *dst, last); + } +} + +void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) +{ + unsigned long pat, fg; + unsigned long width = rect->width, height = rect->height; + int bits = BITS_PER_LONG, bytes = bits >> 3; + u32 bpp = p->var.bits_per_pixel; + unsigned long *dst; + int dst_idx, left; + + if (p->state != FBINFO_STATE_RUNNING) + return; + + if (p->fix.visual == FB_VISUAL_TRUECOLOR || + p->fix.visual == FB_VISUAL_DIRECTCOLOR ) + fg = ((u32 *) (p->pseudo_palette))[rect->color]; + else + fg = rect->color; + + pat = pixel_to_pat( bpp, fg); + + dst = (unsigned long *)((unsigned long)p->screen_base & ~(bytes-1)); + dst_idx = ((unsigned long)p->screen_base & (bytes - 1))*8; + dst_idx += rect->dy*p->fix.line_length*8+rect->dx*bpp; + /* FIXME For now we support 1-32 bpp only */ + left = bits % bpp; + if (p->fbops->fb_sync) + p->fbops->fb_sync(p); + if (!left) { + void (*fill_op32)(unsigned long *dst, int dst_idx, + unsigned long pat, unsigned n, int bits) = + NULL; + + switch (rect->rop) { + case ROP_XOR: + fill_op32 = bitfill_aligned_rev; + break; + case ROP_COPY: + fill_op32 = bitfill_aligned; + break; + default: + printk( KERN_ERR "cfb_fillrect(): unknown rop, " + "defaulting to ROP_COPY\n"); + fill_op32 = bitfill_aligned; + break; + } + while (height--) { + dst += dst_idx >> (ffs(bits) - 1); + dst_idx &= (bits - 1); + fill_op32(dst, dst_idx, pat, width*bpp, bits); + dst_idx += p->fix.line_length*8; + } + } else { + int right; + int r; + int rot = (left-dst_idx) % bpp; + void (*fill_op)(unsigned long *dst, int dst_idx, + unsigned long pat, int left, int right, + unsigned n, int bits) = NULL; + + /* rotate pattern to correct start position */ + pat = pat << rot | pat >> (bpp-rot); + + right = bpp-left; + switch (rect->rop) { + case ROP_XOR: + fill_op = bitfill_unaligned_rev; + break; + case ROP_COPY: + fill_op = bitfill_unaligned; + break; + default: + printk(KERN_ERR "cfb_fillrect(): unknown rop, " + "defaulting to ROP_COPY\n"); + fill_op = bitfill_unaligned; + break; + } + while (height--) { + dst += dst_idx >> (ffs(bits) - 1); + dst_idx &= (bits - 1); + fill_op(dst, dst_idx, pat, left, right, + width*bpp, bits); + r = (p->fix.line_length*8) % bpp; + pat = pat << (bpp-r) | pat >> r; + dst_idx += p->fix.line_length*8; + } + } +} + +EXPORT_SYMBOL(sys_fillrect); + +MODULE_AUTHOR("Antonino Daplas <adaplas@pol.net>"); +MODULE_DESCRIPTION("Generic fill rectangle (sys-to-sys)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/sysimgblt.c b/drivers/video/sysimgblt.c new file mode 100644 index 000000000000..bd7e7e9d155f --- /dev/null +++ b/drivers/video/sysimgblt.c @@ -0,0 +1,291 @@ +/* + * Generic 1-bit or 8-bit source to 1-32 bit destination expansion + * for frame buffer located in system RAM with packed pixels of any depth. + * + * Based almost entirely on cfbimgblt.c + * + * Copyright (C) April 2007 Antonino Daplas <adaplas@pol.net> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ +#include <linux/module.h> +#include <linux/string.h> +#include <linux/fb.h> +#include <asm/types.h> + +#define DEBUG + +#ifdef DEBUG +#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt,__FUNCTION__,## args) +#else +#define DPRINTK(fmt, args...) +#endif + +static const u32 cfb_tab8[] = { +#if defined(__BIG_ENDIAN) + 0x00000000,0x000000ff,0x0000ff00,0x0000ffff, + 0x00ff0000,0x00ff00ff,0x00ffff00,0x00ffffff, + 0xff000000,0xff0000ff,0xff00ff00,0xff00ffff, + 0xffff0000,0xffff00ff,0xffffff00,0xffffffff +#elif defined(__LITTLE_ENDIAN) + 0x00000000,0xff000000,0x00ff0000,0xffff0000, + 0x0000ff00,0xff00ff00,0x00ffff00,0xffffff00, + 0x000000ff,0xff0000ff,0x00ff00ff,0xffff00ff, + 0x0000ffff,0xff00ffff,0x00ffffff,0xffffffff +#else +#error FIXME: No endianness?? +#endif +}; + +static const u32 cfb_tab16[] = { +#if defined(__BIG_ENDIAN) + 0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff +#elif defined(__LITTLE_ENDIAN) + 0x00000000, 0xffff0000, 0x0000ffff, 0xffffffff +#else +#error FIXME: No endianness?? +#endif +}; + +static const u32 cfb_tab32[] = { + 0x00000000, 0xffffffff +}; + +static void color_imageblit(const struct fb_image *image, struct fb_info *p, + void *dst1, u32 start_index, u32 pitch_index) +{ + /* Draw the penguin */ + u32 *dst, *dst2; + u32 color = 0, val, shift; + int i, n, bpp = p->var.bits_per_pixel; + u32 null_bits = 32 - bpp; + u32 *palette = (u32 *) p->pseudo_palette; + const u8 *src = image->data; + + dst2 = dst1; + for (i = image->height; i--; ) { + n = image->width; + dst = dst1; + shift = 0; + val = 0; + + if (start_index) { + u32 start_mask = ~(FB_SHIFT_HIGH(~(u32)0, + start_index)); + val = *dst & start_mask; + shift = start_index; + } + while (n--) { + if (p->fix.visual == FB_VISUAL_TRUECOLOR || + p->fix.visual == FB_VISUAL_DIRECTCOLOR ) + color = palette[*src]; + else + color = *src; + color <<= FB_LEFT_POS(bpp); + val |= FB_SHIFT_HIGH(color, shift); + if (shift >= null_bits) { + *dst++ = val; + + val = (shift == null_bits) ? 0 : + FB_SHIFT_LOW(color, 32 - shift); + } + shift += bpp; + shift &= (32 - 1); + src++; + } + if (shift) { + u32 end_mask = FB_SHIFT_HIGH(~(u32)0, shift); + + *dst &= end_mask; + *dst |= val; + } + dst1 += p->fix.line_length; + if (pitch_index) { + dst2 += p->fix.line_length; + dst1 = (u8 *)((long)dst2 & ~(sizeof(u32) - 1)); + + start_index += pitch_index; + start_index &= 32 - 1; + } + } +} + +static void slow_imageblit(const struct fb_image *image, struct fb_info *p, + void *dst1, u32 fgcolor, u32 bgcolor, + u32 start_index, u32 pitch_index) +{ + u32 shift, color = 0, bpp = p->var.bits_per_pixel; + u32 *dst, *dst2; + u32 val, pitch = p->fix.line_length; + u32 null_bits = 32 - bpp; + u32 spitch = (image->width+7)/8; + const u8 *src = image->data, *s; + u32 i, j, l; + + dst2 = dst1; + fgcolor <<= FB_LEFT_POS(bpp); + bgcolor <<= FB_LEFT_POS(bpp); + + for (i = image->height; i--; ) { + shift = val = 0; + l = 8; + j = image->width; + dst = dst1; + s = src; + + /* write leading bits */ + if (start_index) { + u32 start_mask = ~(FB_SHIFT_HIGH(~(u32)0,start_index)); + val = *dst & start_mask; + shift = start_index; + } + + while (j--) { + l--; + color = (*s & (1 << l)) ? fgcolor : bgcolor; + val |= FB_SHIFT_HIGH(color, shift); + + /* Did the bitshift spill bits to the next long? */ + if (shift >= null_bits) { + *dst++ = val; + val = (shift == null_bits) ? 0 : + FB_SHIFT_LOW(color,32 - shift); + } + shift += bpp; + shift &= (32 - 1); + if (!l) { l = 8; s++; }; + } + + /* write trailing bits */ + if (shift) { + u32 end_mask = FB_SHIFT_HIGH(~(u32)0, shift); + + *dst &= end_mask; + *dst |= val; + } + + dst1 += pitch; + src += spitch; + if (pitch_index) { + dst2 += pitch; + dst1 = (u8 *)((long)dst2 & ~(sizeof(u32) - 1)); + start_index += pitch_index; + start_index &= 32 - 1; + } + + } +} + +/* + * fast_imageblit - optimized monochrome color expansion + * + * Only if: bits_per_pixel == 8, 16, or 32 + * image->width is divisible by pixel/dword (ppw); + * fix->line_legth is divisible by 4; + * beginning and end of a scanline is dword aligned + */ +static void fast_imageblit(const struct fb_image *image, struct fb_info *p, + void *dst1, u32 fgcolor, u32 bgcolor) +{ + u32 fgx = fgcolor, bgx = bgcolor, bpp = p->var.bits_per_pixel; + u32 ppw = 32/bpp, spitch = (image->width + 7)/8; + u32 bit_mask, end_mask, eorx, shift; + const char *s = image->data, *src; + u32 *dst; + const u32 *tab = NULL; + int i, j, k; + + switch (bpp) { + case 8: + tab = cfb_tab8; + break; + case 16: + tab = cfb_tab16; + break; + case 32: + default: + tab = cfb_tab32; + break; + } + + for (i = ppw-1; i--; ) { + fgx <<= bpp; + bgx <<= bpp; + fgx |= fgcolor; + bgx |= bgcolor; + } + + bit_mask = (1 << ppw) - 1; + eorx = fgx ^ bgx; + k = image->width/ppw; + + for (i = image->height; i--; ) { + dst = dst1; + shift = 8; + src = s; + + for (j = k; j--; ) { + shift -= ppw; + end_mask = tab[(*src >> shift) & bit_mask]; + *dst++ = (end_mask & eorx) ^ bgx; + if (!shift) { + shift = 8; + src++; + } + } + dst1 += p->fix.line_length; + s += spitch; + } +} + +void sys_imageblit(struct fb_info *p, const struct fb_image *image) +{ + u32 fgcolor, bgcolor, start_index, bitstart, pitch_index = 0; + u32 bpl = sizeof(u32), bpp = p->var.bits_per_pixel; + u32 width = image->width; + u32 dx = image->dx, dy = image->dy; + void *dst1; + + if (p->state != FBINFO_STATE_RUNNING) + return; + + bitstart = (dy * p->fix.line_length * 8) + (dx * bpp); + start_index = bitstart & (32 - 1); + pitch_index = (p->fix.line_length & (bpl - 1)) * 8; + + bitstart /= 8; + bitstart &= ~(bpl - 1); + dst1 = (void __force *)p->screen_base + bitstart; + + if (p->fbops->fb_sync) + p->fbops->fb_sync(p); + + if (image->depth == 1) { + if (p->fix.visual == FB_VISUAL_TRUECOLOR || + p->fix.visual == FB_VISUAL_DIRECTCOLOR) { + fgcolor = ((u32*)(p->pseudo_palette))[image->fg_color]; + bgcolor = ((u32*)(p->pseudo_palette))[image->bg_color]; + } else { + fgcolor = image->fg_color; + bgcolor = image->bg_color; + } + + if (32 % bpp == 0 && !start_index && !pitch_index && + ((width & (32/bpp-1)) == 0) && + bpp >= 8 && bpp <= 32) + fast_imageblit(image, p, dst1, fgcolor, bgcolor); + else + slow_imageblit(image, p, dst1, fgcolor, bgcolor, + start_index, pitch_index); + } else + color_imageblit(image, p, dst1, start_index, pitch_index); +} + +EXPORT_SYMBOL(sys_imageblit); + +MODULE_AUTHOR("Antonino Daplas <adaplas@pol.net>"); +MODULE_DESCRIPTION("1-bit/8-bit to 1-32 bit color expansion (sys-to-sys)"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c index 7478d0e3e211..f0fde6ea7c36 100644 --- a/drivers/video/tgafb.c +++ b/drivers/video/tgafb.c @@ -5,27 +5,45 @@ * Copyright (C) 1997 Geert Uytterhoeven * Copyright (C) 1999,2000 Martin Lucina, Tom Zerucha * Copyright (C) 2002 Richard Henderson + * Copyright (C) 2006 Maciej W. Rozycki * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/slab.h> +#include <linux/bitrev.h> #include <linux/delay.h> -#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> #include <linux/fb.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> #include <linux/pci.h> #include <linux/selection.h> -#include <linux/bitrev.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/tc.h> + #include <asm/io.h> + #include <video/tgafb.h> +#ifdef CONFIG_PCI +#define TGA_BUS_PCI(dev) (dev->bus == &pci_bus_type) +#else +#define TGA_BUS_PCI(dev) 0 +#endif + +#ifdef CONFIG_TC +#define TGA_BUS_TC(dev) (dev->bus == &tc_bus_type) +#else +#define TGA_BUS_TC(dev) 0 +#endif + /* * Local functions. */ @@ -41,14 +59,19 @@ static void tgafb_init_fix(struct fb_info *); static void tgafb_imageblit(struct fb_info *, const struct fb_image *); static void tgafb_fillrect(struct fb_info *, const struct fb_fillrect *); static void tgafb_copyarea(struct fb_info *, const struct fb_copyarea *); +static int tgafb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info); -static int __devinit tgafb_pci_register(struct pci_dev *, - const struct pci_device_id *); -static void __devexit tgafb_pci_unregister(struct pci_dev *); +static int __devinit tgafb_register(struct device *dev); +static void __devexit tgafb_unregister(struct device *dev); -static const char *mode_option = "640x480@60"; +static const char *mode_option; +static const char *mode_option_pci = "640x480@60"; +static const char *mode_option_tc = "1280x1024@72"; +static struct pci_driver tgafb_pci_driver; +static struct tc_driver tgafb_tc_driver; + /* * Frame buffer operations */ @@ -59,15 +82,20 @@ static struct fb_ops tgafb_ops = { .fb_set_par = tgafb_set_par, .fb_setcolreg = tgafb_setcolreg, .fb_blank = tgafb_blank, + .fb_pan_display = tgafb_pan_display, .fb_fillrect = tgafb_fillrect, .fb_copyarea = tgafb_copyarea, .fb_imageblit = tgafb_imageblit, }; +#ifdef CONFIG_PCI /* * PCI registration operations */ +static int __devinit tgafb_pci_register(struct pci_dev *, + const struct pci_device_id *); +static void __devexit tgafb_pci_unregister(struct pci_dev *); static struct pci_device_id const tgafb_pci_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TGA) }, @@ -75,13 +103,68 @@ static struct pci_device_id const tgafb_pci_table[] = { }; MODULE_DEVICE_TABLE(pci, tgafb_pci_table); -static struct pci_driver tgafb_driver = { +static struct pci_driver tgafb_pci_driver = { .name = "tgafb", .id_table = tgafb_pci_table, .probe = tgafb_pci_register, .remove = __devexit_p(tgafb_pci_unregister), }; +static int __devinit +tgafb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + return tgafb_register(&pdev->dev); +} + +static void __devexit +tgafb_pci_unregister(struct pci_dev *pdev) +{ + tgafb_unregister(&pdev->dev); +} +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_TC +/* + * TC registration operations + */ +static int __devinit tgafb_tc_register(struct device *); +static int __devexit tgafb_tc_unregister(struct device *); + +static struct tc_device_id const tgafb_tc_table[] = { + { "DEC ", "PMAGD-AA" }, + { "DEC ", "PMAGD " }, + { } +}; +MODULE_DEVICE_TABLE(tc, tgafb_tc_table); + +static struct tc_driver tgafb_tc_driver = { + .id_table = tgafb_tc_table, + .driver = { + .name = "tgafb", + .bus = &tc_bus_type, + .probe = tgafb_tc_register, + .remove = __devexit_p(tgafb_tc_unregister), + }, +}; + +static int __devinit +tgafb_tc_register(struct device *dev) +{ + int status = tgafb_register(dev); + if (!status) + get_device(dev); + return status; +} + +static int __devexit +tgafb_tc_unregister(struct device *dev) +{ + put_device(dev); + tgafb_unregister(dev); + return 0; +} +#endif /* CONFIG_TC */ + /** * tgafb_check_var - Optional function. Validates a var passed in. @@ -132,10 +215,10 @@ static int tgafb_set_par(struct fb_info *info) { static unsigned int const deep_presets[4] = { - 0x00014000, - 0x0001440d, + 0x00004000, + 0x0000440d, 0xffffffff, - 0x0001441d + 0x0000441d }; static unsigned int const rasterop_presets[4] = { 0x00000003, @@ -157,6 +240,8 @@ tgafb_set_par(struct fb_info *info) }; struct tga_par *par = (struct tga_par *) info->par; + int tga_bus_pci = TGA_BUS_PCI(par->dev); + int tga_bus_tc = TGA_BUS_TC(par->dev); u32 htimings, vtimings, pll_freq; u8 tga_type; int i; @@ -221,7 +306,7 @@ tgafb_set_par(struct fb_info *info) TGA_WRITE_REG(par, vtimings, TGA_VERT_REG); /* Initalise RAMDAC. */ - if (tga_type == TGA_TYPE_8PLANE) { + if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) { /* Init BT485 RAMDAC registers. */ BT485_WRITE(par, 0xa2 | (par->sync_on_green ? 0x8 : 0x0), @@ -236,21 +321,7 @@ tgafb_set_par(struct fb_info *info) BT485_WRITE(par, 0x00, BT485_ADDR_PAL_WRITE); TGA_WRITE_REG(par, BT485_DATA_PAL, TGA_RAMDAC_SETUP_REG); -#ifdef CONFIG_HW_CONSOLE - for (i = 0; i < 16; i++) { - int j = color_table[i]; - - TGA_WRITE_REG(par, default_red[j]|(BT485_DATA_PAL<<8), - TGA_RAMDAC_REG); - TGA_WRITE_REG(par, default_grn[j]|(BT485_DATA_PAL<<8), - TGA_RAMDAC_REG); - TGA_WRITE_REG(par, default_blu[j]|(BT485_DATA_PAL<<8), - TGA_RAMDAC_REG); - } - for (i = 0; i < 240 * 3; i += 4) { -#else for (i = 0; i < 256 * 3; i += 4) { -#endif TGA_WRITE_REG(par, 0x55 | (BT485_DATA_PAL << 8), TGA_RAMDAC_REG); TGA_WRITE_REG(par, 0x00 | (BT485_DATA_PAL << 8), @@ -261,6 +332,27 @@ tgafb_set_par(struct fb_info *info) TGA_RAMDAC_REG); } + } else if (tga_type == TGA_TYPE_8PLANE && tga_bus_tc) { + + /* Init BT459 RAMDAC registers. */ + BT459_WRITE(par, BT459_REG_ACC, BT459_CMD_REG_0, 0x40); + BT459_WRITE(par, BT459_REG_ACC, BT459_CMD_REG_1, 0x00); + BT459_WRITE(par, BT459_REG_ACC, BT459_CMD_REG_2, + (par->sync_on_green ? 0xc0 : 0x40)); + + BT459_WRITE(par, BT459_REG_ACC, BT459_CUR_CMD_REG, 0x00); + + /* Fill the palette. */ + BT459_LOAD_ADDR(par, 0x0000); + TGA_WRITE_REG(par, BT459_PALETTE << 2, TGA_RAMDAC_SETUP_REG); + + for (i = 0; i < 256 * 3; i += 4) { + TGA_WRITE_REG(par, 0x55, TGA_RAMDAC_REG); + TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); + TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); + TGA_WRITE_REG(par, 0x00, TGA_RAMDAC_REG); + } + } else { /* 24-plane or 24plusZ */ /* Init BT463 RAMDAC registers. */ @@ -431,6 +523,8 @@ tgafb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *info) { struct tga_par *par = (struct tga_par *) info->par; + int tga_bus_pci = TGA_BUS_PCI(par->dev); + int tga_bus_tc = TGA_BUS_TC(par->dev); if (regno > 255) return 1; @@ -438,12 +532,18 @@ tgafb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, green >>= 8; blue >>= 8; - if (par->tga_type == TGA_TYPE_8PLANE) { + if (par->tga_type == TGA_TYPE_8PLANE && tga_bus_pci) { BT485_WRITE(par, regno, BT485_ADDR_PAL_WRITE); TGA_WRITE_REG(par, BT485_DATA_PAL, TGA_RAMDAC_SETUP_REG); TGA_WRITE_REG(par, red|(BT485_DATA_PAL<<8),TGA_RAMDAC_REG); TGA_WRITE_REG(par, green|(BT485_DATA_PAL<<8),TGA_RAMDAC_REG); TGA_WRITE_REG(par, blue|(BT485_DATA_PAL<<8),TGA_RAMDAC_REG); + } else if (par->tga_type == TGA_TYPE_8PLANE && tga_bus_tc) { + BT459_LOAD_ADDR(par, regno); + TGA_WRITE_REG(par, BT459_PALETTE << 2, TGA_RAMDAC_SETUP_REG); + TGA_WRITE_REG(par, red, TGA_RAMDAC_REG); + TGA_WRITE_REG(par, green, TGA_RAMDAC_REG); + TGA_WRITE_REG(par, blue, TGA_RAMDAC_REG); } else { if (regno < 16) { u32 value = (regno << 16) | (regno << 8) | regno; @@ -523,16 +623,8 @@ tgafb_blank(int blank, struct fb_info *info) * Acceleration. */ -/** - * tgafb_imageblit - REQUIRED function. Can use generic routines if - * non acclerated hardware and packed pixel based. - * Copies a image from system memory to the screen. - * - * @info: frame buffer structure that represents a single frame buffer - * @image: structure defining the image. - */ static void -tgafb_imageblit(struct fb_info *info, const struct fb_image *image) +tgafb_mono_imageblit(struct fb_info *info, const struct fb_image *image) { struct tga_par *par = (struct tga_par *) info->par; u32 fgcolor, bgcolor, dx, dy, width, height, vxres, vyres, pixelmask; @@ -542,6 +634,17 @@ tgafb_imageblit(struct fb_info *info, const struct fb_image *image) void __iomem *regs_base; void __iomem *fb_base; + is8bpp = info->var.bits_per_pixel == 8; + + /* For copies that aren't pixel expansion, there's little we + can do better than the generic code. */ + /* ??? There is a DMA write mode; I wonder if that could be + made to pull the data from the image buffer... */ + if (image->depth > 1) { + cfb_imageblit(info, image); + return; + } + dx = image->dx; dy = image->dy; width = image->width; @@ -559,18 +662,8 @@ tgafb_imageblit(struct fb_info *info, const struct fb_image *image) if (dy + height > vyres) height = vyres - dy; - /* For copies that aren't pixel expansion, there's little we - can do better than the generic code. */ - /* ??? There is a DMA write mode; I wonder if that could be - made to pull the data from the image buffer... */ - if (image->depth > 1) { - cfb_imageblit(info, image); - return; - } - regs_base = par->tga_regs_base; fb_base = par->tga_fb_base; - is8bpp = info->var.bits_per_pixel == 8; /* Expand the color values to fill 32-bits. */ /* ??? Would be nice to notice colour changes elsewhere, so @@ -748,6 +841,85 @@ tgafb_imageblit(struct fb_info *info, const struct fb_image *image) regs_base + TGA_MODE_REG); } +static void +tgafb_clut_imageblit(struct fb_info *info, const struct fb_image *image) +{ + struct tga_par *par = (struct tga_par *) info->par; + u32 color, dx, dy, width, height, vxres, vyres; + u32 *palette = ((u32 *)info->pseudo_palette); + unsigned long pos, line_length, i, j; + const unsigned char *data; + void *regs_base, *fb_base; + + dx = image->dx; + dy = image->dy; + width = image->width; + height = image->height; + vxres = info->var.xres_virtual; + vyres = info->var.yres_virtual; + line_length = info->fix.line_length; + + /* Crop the image to the screen. */ + if (dx > vxres || dy > vyres) + return; + if (dx + width > vxres) + width = vxres - dx; + if (dy + height > vyres) + height = vyres - dy; + + regs_base = par->tga_regs_base; + fb_base = par->tga_fb_base; + + pos = dy * line_length + (dx * 4); + data = image->data; + + /* Now copy the image, color_expanding via the palette. */ + for (i = 0; i < height; i++) { + for (j = 0; j < width; j++) { + color = palette[*data++]; + __raw_writel(color, fb_base + pos + j*4); + } + pos += line_length; + } +} + +/** + * tgafb_imageblit - REQUIRED function. Can use generic routines if + * non acclerated hardware and packed pixel based. + * Copies a image from system memory to the screen. + * + * @info: frame buffer structure that represents a single frame buffer + * @image: structure defining the image. + */ +static void +tgafb_imageblit(struct fb_info *info, const struct fb_image *image) +{ + unsigned int is8bpp = info->var.bits_per_pixel == 8; + + /* If a mono image, regardless of FB depth, go do it. */ + if (image->depth == 1) { + tgafb_mono_imageblit(info, image); + return; + } + + /* For copies that aren't pixel expansion, there's little we + can do better than the generic code. */ + /* ??? There is a DMA write mode; I wonder if that could be + made to pull the data from the image buffer... */ + if (image->depth == info->var.bits_per_pixel) { + cfb_imageblit(info, image); + return; + } + + /* If 24-plane FB and the image is 8-plane with CLUT, we can do it. */ + if (!is8bpp && image->depth == 8) { + tgafb_clut_imageblit(info, image); + return; + } + + /* Silently return... */ +} + /** * tgafb_fillrect - REQUIRED function. Can use generic routines if * non acclerated hardware and packed pixel based. @@ -1309,18 +1481,29 @@ static void tgafb_init_fix(struct fb_info *info) { struct tga_par *par = (struct tga_par *)info->par; + int tga_bus_pci = TGA_BUS_PCI(par->dev); + int tga_bus_tc = TGA_BUS_TC(par->dev); u8 tga_type = par->tga_type; - const char *tga_type_name; + const char *tga_type_name = NULL; switch (tga_type) { case TGA_TYPE_8PLANE: - tga_type_name = "Digital ZLXp-E1"; + if (tga_bus_pci) + tga_type_name = "Digital ZLXp-E1"; + if (tga_bus_tc) + tga_type_name = "Digital ZLX-E1"; break; case TGA_TYPE_24PLANE: - tga_type_name = "Digital ZLXp-E2"; + if (tga_bus_pci) + tga_type_name = "Digital ZLXp-E2"; + if (tga_bus_tc) + tga_type_name = "Digital ZLX-E2"; break; case TGA_TYPE_24PLUSZ: - tga_type_name = "Digital ZLXp-E3"; + if (tga_bus_pci) + tga_type_name = "Digital ZLXp-E3"; + if (tga_bus_tc) + tga_type_name = "Digital ZLX-E3"; break; default: tga_type_name = "Unknown"; @@ -1346,11 +1529,37 @@ tgafb_init_fix(struct fb_info *info) info->fix.ywrapstep = 0; info->fix.accel = FB_ACCEL_DEC_TGA; + + /* + * These are needed by fb_set_logo_truepalette(), so we + * set them here for 24-plane cards. + */ + if (tga_type != TGA_TYPE_8PLANE) { + info->var.red.length = 8; + info->var.green.length = 8; + info->var.blue.length = 8; + info->var.red.offset = 16; + info->var.green.offset = 8; + info->var.blue.offset = 0; + } } -static __devinit int -tgafb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) +static int tgafb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) +{ + /* We just use this to catch switches out of graphics mode. */ + tgafb_set_par(info); /* A bit of overkill for BASE_ADDR reset. */ + return 0; +} + +static int __devinit +tgafb_register(struct device *dev) { + static const struct fb_videomode modedb_tc = { + /* 1280x1024 @ 72 Hz, 76.8 kHz hsync */ + "1280x1024@72", 0, 1280, 1024, 7645, 224, 28, 33, 3, 160, 3, + FB_SYNC_ON_GREEN, FB_VMODE_NONINTERLACED + }; + static unsigned int const fb_offset_presets[4] = { TGA_8PLANE_FB_OFFSET, TGA_24PLANE_FB_OFFSET, @@ -1358,40 +1567,51 @@ tgafb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) TGA_24PLUSZ_FB_OFFSET }; + const struct fb_videomode *modedb_tga = NULL; + resource_size_t bar0_start = 0, bar0_len = 0; + const char *mode_option_tga = NULL; + int tga_bus_pci = TGA_BUS_PCI(dev); + int tga_bus_tc = TGA_BUS_TC(dev); + unsigned int modedbsize_tga = 0; void __iomem *mem_base; - unsigned long bar0_start, bar0_len; struct fb_info *info; struct tga_par *par; u8 tga_type; - int ret; + int ret = 0; /* Enable device in PCI config. */ - if (pci_enable_device(pdev)) { + if (tga_bus_pci && pci_enable_device(to_pci_dev(dev))) { printk(KERN_ERR "tgafb: Cannot enable PCI device\n"); return -ENODEV; } /* Allocate the fb and par structures. */ - info = framebuffer_alloc(sizeof(struct tga_par), &pdev->dev); + info = framebuffer_alloc(sizeof(struct tga_par), dev); if (!info) { printk(KERN_ERR "tgafb: Cannot allocate memory\n"); return -ENOMEM; } par = info->par; - pci_set_drvdata(pdev, info); + dev_set_drvdata(dev, info); /* Request the mem regions. */ - bar0_start = pci_resource_start(pdev, 0); - bar0_len = pci_resource_len(pdev, 0); ret = -ENODEV; + if (tga_bus_pci) { + bar0_start = pci_resource_start(to_pci_dev(dev), 0); + bar0_len = pci_resource_len(to_pci_dev(dev), 0); + } + if (tga_bus_tc) { + bar0_start = to_tc_dev(dev)->resource.start; + bar0_len = to_tc_dev(dev)->resource.end - bar0_start + 1; + } if (!request_mem_region (bar0_start, bar0_len, "tgafb")) { printk(KERN_ERR "tgafb: cannot reserve FB region\n"); goto err0; } /* Map the framebuffer. */ - mem_base = ioremap(bar0_start, bar0_len); + mem_base = ioremap_nocache(bar0_start, bar0_len); if (!mem_base) { printk(KERN_ERR "tgafb: Cannot map MMIO\n"); goto err1; @@ -1399,12 +1619,16 @@ tgafb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) /* Grab info about the card. */ tga_type = (readl(mem_base) >> 12) & 0x0f; - par->pdev = pdev; + par->dev = dev; par->tga_mem_base = mem_base; par->tga_fb_base = mem_base + fb_offset_presets[tga_type]; par->tga_regs_base = mem_base + TGA_REGS_OFFSET; par->tga_type = tga_type; - pci_read_config_byte(pdev, PCI_REVISION_ID, &par->tga_chip_rev); + if (tga_bus_pci) + pci_read_config_byte(to_pci_dev(dev), PCI_REVISION_ID, + &par->tga_chip_rev); + if (tga_bus_tc) + par->tga_chip_rev = TGA_READ_REG(par, TGA_START_REG) & 0xff; /* Setup framebuffer. */ info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA | @@ -1414,8 +1638,17 @@ tgafb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) info->pseudo_palette = (void *)(par + 1); /* This should give a reasonable default video mode. */ - - ret = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, + if (tga_bus_pci) { + mode_option_tga = mode_option_pci; + } + if (tga_bus_tc) { + mode_option_tga = mode_option_tc; + modedb_tga = &modedb_tc; + modedbsize_tga = 1; + } + ret = fb_find_mode(&info->var, info, + mode_option ? mode_option : mode_option_tga, + modedb_tga, modedbsize_tga, NULL, tga_type == TGA_TYPE_8PLANE ? 8 : 32); if (ret == 0 || ret == 4) { printk(KERN_ERR "tgafb: Could not find valid video mode\n"); @@ -1438,13 +1671,19 @@ tgafb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) goto err1; } - printk(KERN_INFO "tgafb: DC21030 [TGA] detected, rev=0x%02x\n", - par->tga_chip_rev); - printk(KERN_INFO "tgafb: at PCI bus %d, device %d, function %d\n", - pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn)); - printk(KERN_INFO "fb%d: %s frame buffer device at 0x%lx\n", - info->node, info->fix.id, bar0_start); + if (tga_bus_pci) { + pr_info("tgafb: DC21030 [TGA] detected, rev=0x%02x\n", + par->tga_chip_rev); + pr_info("tgafb: at PCI bus %d, device %d, function %d\n", + to_pci_dev(dev)->bus->number, + PCI_SLOT(to_pci_dev(dev)->devfn), + PCI_FUNC(to_pci_dev(dev)->devfn)); + } + if (tga_bus_tc) + pr_info("tgafb: SFB+ detected, rev=0x%02x\n", + par->tga_chip_rev); + pr_info("fb%d: %s frame buffer device at 0x%lx\n", + info->node, info->fix.id, (long)bar0_start); return 0; @@ -1458,25 +1697,39 @@ tgafb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent) } static void __devexit -tgafb_pci_unregister(struct pci_dev *pdev) +tgafb_unregister(struct device *dev) { - struct fb_info *info = pci_get_drvdata(pdev); - struct tga_par *par = info->par; + resource_size_t bar0_start = 0, bar0_len = 0; + int tga_bus_pci = TGA_BUS_PCI(dev); + int tga_bus_tc = TGA_BUS_TC(dev); + struct fb_info *info = NULL; + struct tga_par *par; + info = dev_get_drvdata(dev); if (!info) return; + + par = info->par; unregister_framebuffer(info); fb_dealloc_cmap(&info->cmap); iounmap(par->tga_mem_base); - release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); + if (tga_bus_pci) { + bar0_start = pci_resource_start(to_pci_dev(dev), 0); + bar0_len = pci_resource_len(to_pci_dev(dev), 0); + } + if (tga_bus_tc) { + bar0_start = to_tc_dev(dev)->resource.start; + bar0_len = to_tc_dev(dev)->resource.end - bar0_start + 1; + } + release_mem_region(bar0_start, bar0_len); framebuffer_release(info); } static void __devexit tgafb_exit(void) { - pci_unregister_driver(&tgafb_driver); + tc_unregister_driver(&tgafb_tc_driver); + pci_unregister_driver(&tgafb_pci_driver); } #ifndef MODULE @@ -1505,6 +1758,7 @@ tgafb_setup(char *arg) static int __devinit tgafb_init(void) { + int status; #ifndef MODULE char *option = NULL; @@ -1512,7 +1766,10 @@ tgafb_init(void) return -ENODEV; tgafb_setup(option); #endif - return pci_register_driver(&tgafb_driver); + status = pci_register_driver(&tgafb_pci_driver); + if (!status) + status = tc_register_driver(&tgafb_tc_driver); + return status; } /* @@ -1522,5 +1779,5 @@ tgafb_init(void) module_init(tgafb_init); module_exit(tgafb_exit); -MODULE_DESCRIPTION("framebuffer driver for TGA chipset"); +MODULE_DESCRIPTION("Framebuffer driver for TGA/SFB+ chipset"); MODULE_LICENSE("GPL"); diff --git a/drivers/video/vermilion/Makefile b/drivers/video/vermilion/Makefile new file mode 100644 index 000000000000..cc21a656153d --- /dev/null +++ b/drivers/video/vermilion/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_FB_LE80578) += vmlfb.o +obj-$(CONFIG_FB_CARILLO_RANCH) += crvml.o + +vmlfb-objs := vermilion.o +crvml-objs := cr_pll.o diff --git a/drivers/video/vermilion/cr_pll.c b/drivers/video/vermilion/cr_pll.c new file mode 100644 index 000000000000..ebc6e6e0dd0f --- /dev/null +++ b/drivers/video/vermilion/cr_pll.c @@ -0,0 +1,208 @@ +/* + * Copyright (c) Intel Corp. 2007. + * All Rights Reserved. + * + * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to + * develop this driver. + * + * This file is part of the Carillo Ranch video subsystem driver. + * The Carillo Ranch video subsystem driver is free software; + * you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The Carillo Ranch video subsystem driver is distributed + * in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: + * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com> + * Alan Hourihane <alanh-at-tungstengraphics-dot-com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/errno.h> +#include <linux/fb.h> +#include "vermilion.h" + +/* The PLL Clock register sits on Host bridge */ +#define CRVML_DEVICE_MCH 0x5001 +#define CRVML_REG_MCHBAR 0x44 +#define CRVML_REG_MCHEN 0x54 +#define CRVML_MCHEN_BIT (1 << 28) +#define CRVML_MCHMAP_SIZE 4096 +#define CRVML_REG_CLOCK 0xc3c +#define CRVML_CLOCK_SHIFT 8 +#define CRVML_CLOCK_MASK 0x00000f00 + +static struct pci_dev *mch_dev; +static u32 mch_bar; +static void __iomem *mch_regs_base; +static u32 saved_clock; + +static const unsigned crvml_clocks[] = { + 6750, + 13500, + 27000, + 29700, + 37125, + 54000, + 59400, + 74250, + 120000 + /* + * There are more clocks, but they are disabled on the CR board. + */ +}; + +static const u32 crvml_clock_bits[] = { + 0x0a, + 0x09, + 0x08, + 0x07, + 0x06, + 0x05, + 0x04, + 0x03, + 0x0b +}; + +static const unsigned crvml_num_clocks = ARRAY_SIZE(crvml_clocks); + +static int crvml_sys_restore(struct vml_sys *sys) +{ + void __iomem *clock_reg = mch_regs_base + CRVML_REG_CLOCK; + + iowrite32(saved_clock, clock_reg); + ioread32(clock_reg); + + return 0; +} + +static int crvml_sys_save(struct vml_sys *sys) +{ + void __iomem *clock_reg = mch_regs_base + CRVML_REG_CLOCK; + + saved_clock = ioread32(clock_reg); + + return 0; +} + +static int crvml_nearest_index(const struct vml_sys *sys, int clock) +{ + int i; + int cur_index = 0; + int cur_diff; + int diff; + + cur_diff = clock - crvml_clocks[0]; + cur_diff = (cur_diff < 0) ? -cur_diff : cur_diff; + for (i = 1; i < crvml_num_clocks; ++i) { + diff = clock - crvml_clocks[i]; + diff = (diff < 0) ? -diff : diff; + if (diff < cur_diff) { + cur_index = i; + cur_diff = diff; + } + } + return cur_index; +} + +static int crvml_nearest_clock(const struct vml_sys *sys, int clock) +{ + return crvml_clocks[crvml_nearest_index(sys, clock)]; +} + +static int crvml_set_clock(struct vml_sys *sys, int clock) +{ + void __iomem *clock_reg = mch_regs_base + CRVML_REG_CLOCK; + int index; + u32 clock_val; + + index = crvml_nearest_index(sys, clock); + + if (crvml_clocks[index] != clock) + return -EINVAL; + + clock_val = ioread32(clock_reg) & ~CRVML_CLOCK_MASK; + clock_val = crvml_clock_bits[index] << CRVML_CLOCK_SHIFT; + iowrite32(clock_val, clock_reg); + ioread32(clock_reg); + + return 0; +} + +static struct vml_sys cr_pll_ops = { + .name = "Carillo Ranch", + .save = crvml_sys_save, + .restore = crvml_sys_restore, + .set_clock = crvml_set_clock, + .nearest_clock = crvml_nearest_clock, +}; + +static int __init cr_pll_init(void) +{ + int err; + u32 dev_en; + + mch_dev = pci_get_device(PCI_VENDOR_ID_INTEL, + CRVML_DEVICE_MCH, NULL); + if (!mch_dev) { + printk(KERN_ERR + "Could not find Carillo Ranch MCH device.\n"); + return -ENODEV; + } + + pci_read_config_dword(mch_dev, CRVML_REG_MCHEN, &dev_en); + if (!(dev_en & CRVML_MCHEN_BIT)) { + printk(KERN_ERR + "Carillo Ranch MCH device was not enabled.\n"); + pci_dev_put(mch_dev); + return -ENODEV; + } + + pci_read_config_dword(mch_dev, CRVML_REG_MCHBAR, + &mch_bar); + mch_regs_base = + ioremap_nocache(mch_bar, CRVML_MCHMAP_SIZE); + if (!mch_regs_base) { + printk(KERN_ERR + "Carillo Ranch MCH device was not enabled.\n"); + pci_dev_put(mch_dev); + return -ENODEV; + } + + err = vmlfb_register_subsys(&cr_pll_ops); + if (err) { + printk(KERN_ERR + "Carillo Ranch failed to initialize vml_sys.\n"); + pci_dev_put(mch_dev); + return err; + } + + return 0; +} + +static void __exit cr_pll_exit(void) +{ + vmlfb_unregister_subsys(&cr_pll_ops); + + iounmap(mch_regs_base); + pci_dev_put(mch_dev); +} + +module_init(cr_pll_init); +module_exit(cr_pll_exit); + +MODULE_AUTHOR("Tungsten Graphics Inc."); +MODULE_DESCRIPTION("Carillo Ranch PLL Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/vermilion/vermilion.c b/drivers/video/vermilion/vermilion.c new file mode 100644 index 000000000000..de531c907718 --- /dev/null +++ b/drivers/video/vermilion/vermilion.c @@ -0,0 +1,1195 @@ +/* + * Copyright (c) Intel Corp. 2007. + * All Rights Reserved. + * + * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to + * develop this driver. + * + * This file is part of the Vermilion Range fb driver. + * The Vermilion Range fb driver is free software; + * you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The Vermilion Range fb driver is distributed + * in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: + * Thomas Hellström <thomas-at-tungstengraphics-dot-com> + * Michel Dänzer <michel-at-tungstengraphics-dot-com> + * Alan Hourihane <alanh-at-tungstengraphics-dot-com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <linux/fb.h> +#include <linux/pci.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <linux/mmzone.h> +#include <asm/uaccess.h> + +/* #define VERMILION_DEBUG */ + +#include "vermilion.h" + +#define MODULE_NAME "vmlfb" + +#define VML_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16) + +static struct mutex vml_mutex; +static struct list_head global_no_mode; +static struct list_head global_has_mode; +static struct fb_ops vmlfb_ops; +static struct vml_sys *subsys = NULL; +static char *vml_default_mode = "1024x768@60"; +static struct fb_videomode defaultmode = { + NULL, 60, 1024, 768, 12896, 144, 24, 29, 3, 136, 6, + 0, FB_VMODE_NONINTERLACED +}; + +static u32 vml_mem_requested = (10 * 1024 * 1024); +static u32 vml_mem_contig = (4 * 1024 * 1024); +static u32 vml_mem_min = (4 * 1024 * 1024); + +static u32 vml_clocks[] = { + 6750, + 13500, + 27000, + 29700, + 37125, + 54000, + 59400, + 74250, + 120000, + 148500 +}; + +static u32 vml_num_clocks = ARRAY_SIZE(vml_clocks); + +/* + * Allocate a contiguous vram area and make its linear kernel map + * uncached. + */ + +static int vmlfb_alloc_vram_area(struct vram_area *va, unsigned max_order, + unsigned min_order) +{ + gfp_t flags; + unsigned long i; + pgprot_t wc_pageprot; + + wc_pageprot = PAGE_KERNEL_NOCACHE; + max_order++; + do { + /* + * Really try hard to get the needed memory. + * We need memory below the first 32MB, so we + * add the __GFP_DMA flag that guarantees that we are + * below the first 16MB. + */ + + flags = __GFP_DMA | __GFP_HIGH; + va->logical = + __get_free_pages(flags, --max_order); + } while (va->logical == 0 && max_order > min_order); + + if (!va->logical) + return -ENOMEM; + + va->phys = virt_to_phys((void *)va->logical); + va->size = PAGE_SIZE << max_order; + va->order = max_order; + + /* + * It seems like __get_free_pages only ups the usage count + * of the first page. This doesn't work with nopage mapping, so + * up the usage count once more. + */ + + memset((void *)va->logical, 0x00, va->size); + for (i = va->logical; i < va->logical + va->size; i += PAGE_SIZE) { + get_page(virt_to_page(i)); + } + + /* + * Change caching policy of the linear kernel map to avoid + * mapping type conflicts with user-space mappings. + * The first global_flush_tlb() is really only there to do a global + * wbinvd(). + */ + + global_flush_tlb(); + change_page_attr(virt_to_page(va->logical), va->size >> PAGE_SHIFT, + wc_pageprot); + global_flush_tlb(); + + printk(KERN_DEBUG MODULE_NAME + ": Allocated %ld bytes vram area at 0x%08lx\n", + va->size, va->phys); + + return 0; +} + +/* + * Free a contiguous vram area and reset its linear kernel map + * mapping type. + */ + +static void vmlfb_free_vram_area(struct vram_area *va) +{ + unsigned long j; + + if (va->logical) { + + /* + * Reset the linear kernel map caching policy. + */ + + change_page_attr(virt_to_page(va->logical), + va->size >> PAGE_SHIFT, PAGE_KERNEL); + global_flush_tlb(); + + /* + * Decrease the usage count on the pages we've used + * to compensate for upping when allocating. + */ + + for (j = va->logical; j < va->logical + va->size; + j += PAGE_SIZE) { + (void)put_page_testzero(virt_to_page(j)); + } + + printk(KERN_DEBUG MODULE_NAME + ": Freeing %ld bytes vram area at 0x%08lx\n", + va->size, va->phys); + free_pages(va->logical, va->order); + + va->logical = 0; + } +} + +/* + * Free allocated vram. + */ + +static void vmlfb_free_vram(struct vml_info *vinfo) +{ + int i; + + for (i = 0; i < vinfo->num_areas; ++i) { + vmlfb_free_vram_area(&vinfo->vram[i]); + } + vinfo->num_areas = 0; +} + +/* + * Allocate vram. Currently we try to allocate contiguous areas from the + * __GFP_DMA zone and puzzle them together. A better approach would be to + * allocate one contiguous area for scanout and use one-page allocations for + * offscreen areas. This requires user-space and GPU virtual mappings. + */ + +static int vmlfb_alloc_vram(struct vml_info *vinfo, + size_t requested, + size_t min_total, size_t min_contig) +{ + int i, j; + int order; + int contiguous; + int err; + struct vram_area *va; + struct vram_area *va2; + + vinfo->num_areas = 0; + for (i = 0; i < VML_VRAM_AREAS; ++i) { + va = &vinfo->vram[i]; + order = 0; + + while (requested > (PAGE_SIZE << order) && order < MAX_ORDER) + order++; + + err = vmlfb_alloc_vram_area(va, order, 0); + + if (err) + break; + + if (i == 0) { + vinfo->vram_start = va->phys; + vinfo->vram_logical = (void __iomem *) va->logical; + vinfo->vram_contig_size = va->size; + vinfo->num_areas = 1; + } else { + contiguous = 0; + + for (j = 0; j < i; ++j) { + va2 = &vinfo->vram[j]; + if (va->phys + va->size == va2->phys || + va2->phys + va2->size == va->phys) { + contiguous = 1; + break; + } + } + + if (contiguous) { + vinfo->num_areas++; + if (va->phys < vinfo->vram_start) { + vinfo->vram_start = va->phys; + vinfo->vram_logical = + (void __iomem *)va->logical; + } + vinfo->vram_contig_size += va->size; + } else { + vmlfb_free_vram_area(va); + break; + } + } + + if (requested < va->size) + break; + else + requested -= va->size; + } + + if (vinfo->vram_contig_size > min_total && + vinfo->vram_contig_size > min_contig) { + + printk(KERN_DEBUG MODULE_NAME + ": Contiguous vram: %ld bytes at physical 0x%08lx.\n", + (unsigned long)vinfo->vram_contig_size, + (unsigned long)vinfo->vram_start); + + return 0; + } + + printk(KERN_ERR MODULE_NAME + ": Could not allocate requested minimal amount of vram.\n"); + + vmlfb_free_vram(vinfo); + + return -ENOMEM; +} + +/* + * Find the GPU to use with our display controller. + */ + +static int vmlfb_get_gpu(struct vml_par *par) +{ + mutex_lock(&vml_mutex); + + par->gpu = pci_get_device(PCI_VENDOR_ID_INTEL, VML_DEVICE_GPU, NULL); + + if (!par->gpu) { + mutex_unlock(&vml_mutex); + return -ENODEV; + } + + mutex_unlock(&vml_mutex); + + if (pci_enable_device(par->gpu) < 0) + return -ENODEV; + + return 0; +} + +/* + * Find a contiguous vram area that contains a given offset from vram start. + */ +static int vmlfb_vram_offset(struct vml_info *vinfo, unsigned long offset) +{ + unsigned long aoffset; + unsigned i; + + for (i = 0; i < vinfo->num_areas; ++i) { + aoffset = offset - (vinfo->vram[i].phys - vinfo->vram_start); + + if (aoffset < vinfo->vram[i].size) { + return 0; + } + } + + return -EINVAL; +} + +/* + * Remap the MMIO register spaces of the VDC and the GPU. + */ + +static int vmlfb_enable_mmio(struct vml_par *par) +{ + int err; + + par->vdc_mem_base = pci_resource_start(par->vdc, 0); + par->vdc_mem_size = pci_resource_len(par->vdc, 0); + if (!request_mem_region(par->vdc_mem_base, par->vdc_mem_size, "vmlfb")) { + printk(KERN_ERR MODULE_NAME + ": Could not claim display controller MMIO.\n"); + return -EBUSY; + } + par->vdc_mem = ioremap_nocache(par->vdc_mem_base, par->vdc_mem_size); + if (par->vdc_mem == NULL) { + printk(KERN_ERR MODULE_NAME + ": Could not map display controller MMIO.\n"); + err = -ENOMEM; + goto out_err_0; + } + + par->gpu_mem_base = pci_resource_start(par->gpu, 0); + par->gpu_mem_size = pci_resource_len(par->gpu, 0); + if (!request_mem_region(par->gpu_mem_base, par->gpu_mem_size, "vmlfb")) { + printk(KERN_ERR MODULE_NAME ": Could not claim GPU MMIO.\n"); + err = -EBUSY; + goto out_err_1; + } + par->gpu_mem = ioremap_nocache(par->gpu_mem_base, par->gpu_mem_size); + if (par->gpu_mem == NULL) { + printk(KERN_ERR MODULE_NAME ": Could not map GPU MMIO.\n"); + err = -ENOMEM; + goto out_err_2; + } + + return 0; + +out_err_2: + release_mem_region(par->gpu_mem_base, par->gpu_mem_size); +out_err_1: + iounmap(par->vdc_mem); +out_err_0: + release_mem_region(par->vdc_mem_base, par->vdc_mem_size); + return err; +} + +/* + * Unmap the VDC and GPU register spaces. + */ + +static void vmlfb_disable_mmio(struct vml_par *par) +{ + iounmap(par->gpu_mem); + release_mem_region(par->gpu_mem_base, par->gpu_mem_size); + iounmap(par->vdc_mem); + release_mem_region(par->vdc_mem_base, par->vdc_mem_size); +} + +/* + * Release and uninit the VDC and GPU. + */ + +static void vmlfb_release_devices(struct vml_par *par) +{ + if (atomic_dec_and_test(&par->refcount)) { + pci_set_drvdata(par->vdc, NULL); + pci_disable_device(par->gpu); + pci_disable_device(par->vdc); + } +} + +/* + * Free up allocated resources for a device. + */ + +static void __devexit vml_pci_remove(struct pci_dev *dev) +{ + struct fb_info *info; + struct vml_info *vinfo; + struct vml_par *par; + + info = pci_get_drvdata(dev); + if (info) { + vinfo = container_of(info, struct vml_info, info); + par = vinfo->par; + mutex_lock(&vml_mutex); + unregister_framebuffer(info); + fb_dealloc_cmap(&info->cmap); + vmlfb_free_vram(vinfo); + vmlfb_disable_mmio(par); + vmlfb_release_devices(par); + kfree(vinfo); + kfree(par); + mutex_unlock(&vml_mutex); + } +} + +static void vmlfb_set_pref_pixel_format(struct fb_var_screeninfo *var) +{ + switch (var->bits_per_pixel) { + case 16: + var->blue.offset = 0; + var->blue.length = 5; + var->green.offset = 5; + var->green.length = 5; + var->red.offset = 10; + var->red.length = 5; + var->transp.offset = 15; + var->transp.length = 1; + break; + case 32: + var->blue.offset = 0; + var->blue.length = 8; + var->green.offset = 8; + var->green.length = 8; + var->red.offset = 16; + var->red.length = 8; + var->transp.offset = 24; + var->transp.length = 0; + break; + default: + break; + } + + var->blue.msb_right = var->green.msb_right = + var->red.msb_right = var->transp.msb_right = 0; +} + +/* + * Device initialization. + * We initialize one vml_par struct per device and one vml_info + * struct per pipe. Currently we have only one pipe. + */ + +static int __devinit vml_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct vml_info *vinfo; + struct fb_info *info; + struct vml_par *par; + int err = 0; + + par = kzalloc(sizeof(*par), GFP_KERNEL); + if (par == NULL) + return -ENOMEM; + + vinfo = kzalloc(sizeof(*vinfo), GFP_KERNEL); + if (vinfo == NULL) { + err = -ENOMEM; + goto out_err_0; + } + + vinfo->par = par; + par->vdc = dev; + atomic_set(&par->refcount, 1); + + switch (id->device) { + case VML_DEVICE_VDC: + if ((err = vmlfb_get_gpu(par))) + goto out_err_1; + pci_set_drvdata(dev, &vinfo->info); + break; + default: + err = -ENODEV; + goto out_err_1; + break; + } + + info = &vinfo->info; + info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK; + + err = vmlfb_enable_mmio(par); + if (err) + goto out_err_2; + + err = vmlfb_alloc_vram(vinfo, vml_mem_requested, + vml_mem_contig, vml_mem_min); + if (err) + goto out_err_3; + + strcpy(info->fix.id, "Vermilion Range"); + info->fix.mmio_start = 0; + info->fix.mmio_len = 0; + info->fix.smem_start = vinfo->vram_start; + info->fix.smem_len = vinfo->vram_contig_size; + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.ypanstep = 1; + info->fix.xpanstep = 1; + info->fix.ywrapstep = 0; + info->fix.accel = FB_ACCEL_NONE; + info->screen_base = vinfo->vram_logical; + info->pseudo_palette = vinfo->pseudo_palette; + info->par = par; + info->fbops = &vmlfb_ops; + info->device = &dev->dev; + + INIT_LIST_HEAD(&vinfo->head); + vinfo->pipe_disabled = 1; + vinfo->cur_blank_mode = FB_BLANK_UNBLANK; + + info->var.grayscale = 0; + info->var.bits_per_pixel = 16; + vmlfb_set_pref_pixel_format(&info->var); + + if (!fb_find_mode + (&info->var, info, vml_default_mode, NULL, 0, &defaultmode, 16)) { + printk(KERN_ERR MODULE_NAME ": Could not find initial mode\n"); + } + + if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) { + err = -ENOMEM; + goto out_err_4; + } + + err = register_framebuffer(info); + if (err) { + printk(KERN_ERR MODULE_NAME ": Register framebuffer error.\n"); + goto out_err_5; + } + + printk("Initialized vmlfb\n"); + + return 0; + +out_err_5: + fb_dealloc_cmap(&info->cmap); +out_err_4: + vmlfb_free_vram(vinfo); +out_err_3: + vmlfb_disable_mmio(par); +out_err_2: + vmlfb_release_devices(par); +out_err_1: + kfree(vinfo); +out_err_0: + kfree(par); + return err; +} + +static int vmlfb_open(struct fb_info *info, int user) +{ + /* + * Save registers here? + */ + return 0; +} + +static int vmlfb_release(struct fb_info *info, int user) +{ + /* + * Restore registers here. + */ + + return 0; +} + +static int vml_nearest_clock(int clock) +{ + + int i; + int cur_index; + int cur_diff; + int diff; + + cur_index = 0; + cur_diff = clock - vml_clocks[0]; + cur_diff = (cur_diff < 0) ? -cur_diff : cur_diff; + for (i = 1; i < vml_num_clocks; ++i) { + diff = clock - vml_clocks[i]; + diff = (diff < 0) ? -diff : diff; + if (diff < cur_diff) { + cur_index = i; + cur_diff = diff; + } + } + return vml_clocks[cur_index]; +} + +static int vmlfb_check_var_locked(struct fb_var_screeninfo *var, + struct vml_info *vinfo) +{ + u32 pitch; + u64 mem; + int nearest_clock; + int clock; + int clock_diff; + struct fb_var_screeninfo v; + + v = *var; + clock = PICOS2KHZ(var->pixclock); + + if (subsys && subsys->nearest_clock) { + nearest_clock = subsys->nearest_clock(subsys, clock); + } else { + nearest_clock = vml_nearest_clock(clock); + } + + /* + * Accept a 20% diff. + */ + + clock_diff = nearest_clock - clock; + clock_diff = (clock_diff < 0) ? -clock_diff : clock_diff; + if (clock_diff > clock / 5) { +#if 0 + printk(KERN_DEBUG MODULE_NAME ": Diff failure. %d %d\n",clock_diff,clock); +#endif + return -EINVAL; + } + + v.pixclock = KHZ2PICOS(nearest_clock); + + if (var->xres > VML_MAX_XRES || var->yres > VML_MAX_YRES) { + printk(KERN_DEBUG MODULE_NAME ": Resolution failure.\n"); + return -EINVAL; + } + if (var->xres_virtual > VML_MAX_XRES_VIRTUAL) { + printk(KERN_DEBUG MODULE_NAME + ": Virtual resolution failure.\n"); + return -EINVAL; + } + switch (v.bits_per_pixel) { + case 0 ... 16: + v.bits_per_pixel = 16; + break; + case 17 ... 32: + v.bits_per_pixel = 32; + break; + default: + printk(KERN_DEBUG MODULE_NAME ": Invalid bpp: %d.\n", + var->bits_per_pixel); + return -EINVAL; + } + + pitch = __ALIGN_MASK((var->xres * var->bits_per_pixel) >> 3, 0x3F); + mem = pitch * var->yres_virtual; + if (mem > vinfo->vram_contig_size) { + return -ENOMEM; + } + + switch (v.bits_per_pixel) { + case 16: + if (var->blue.offset != 0 || + var->blue.length != 5 || + var->green.offset != 5 || + var->green.length != 5 || + var->red.offset != 10 || + var->red.length != 5 || + var->transp.offset != 15 || var->transp.length != 1) { + vmlfb_set_pref_pixel_format(&v); + } + break; + case 32: + if (var->blue.offset != 0 || + var->blue.length != 8 || + var->green.offset != 8 || + var->green.length != 8 || + var->red.offset != 16 || + var->red.length != 8 || + (var->transp.length != 0 && var->transp.length != 8) || + (var->transp.length == 8 && var->transp.offset != 24)) { + vmlfb_set_pref_pixel_format(&v); + } + break; + default: + return -EINVAL; + } + + *var = v; + + return 0; +} + +static int vmlfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct vml_info *vinfo = container_of(info, struct vml_info, info); + int ret; + + mutex_lock(&vml_mutex); + ret = vmlfb_check_var_locked(var, vinfo); + mutex_unlock(&vml_mutex); + + return ret; +} + +static void vml_wait_vblank(struct vml_info *vinfo) +{ + /* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */ + mdelay(20); +} + +static void vmlfb_disable_pipe(struct vml_info *vinfo) +{ + struct vml_par *par = vinfo->par; + + /* Disable the MDVO pad */ + VML_WRITE32(par, VML_RCOMPSTAT, 0); + while (!(VML_READ32(par, VML_RCOMPSTAT) & VML_MDVO_VDC_I_RCOMP)) ; + + /* Disable display planes */ + VML_WRITE32(par, VML_DSPCCNTR, + VML_READ32(par, VML_DSPCCNTR) & ~VML_GFX_ENABLE); + (void)VML_READ32(par, VML_DSPCCNTR); + /* Wait for vblank for the disable to take effect */ + vml_wait_vblank(vinfo); + + /* Next, disable display pipes */ + VML_WRITE32(par, VML_PIPEACONF, 0); + (void)VML_READ32(par, VML_PIPEACONF); + + vinfo->pipe_disabled = 1; +} + +#ifdef VERMILION_DEBUG +static void vml_dump_regs(struct vml_info *vinfo) +{ + struct vml_par *par = vinfo->par; + + printk(KERN_DEBUG MODULE_NAME ": Modesetting register dump:\n"); + printk(KERN_DEBUG MODULE_NAME ": \tHTOTAL_A : 0x%08x\n", + (unsigned)VML_READ32(par, VML_HTOTAL_A)); + printk(KERN_DEBUG MODULE_NAME ": \tHBLANK_A : 0x%08x\n", + (unsigned)VML_READ32(par, VML_HBLANK_A)); + printk(KERN_DEBUG MODULE_NAME ": \tHSYNC_A : 0x%08x\n", + (unsigned)VML_READ32(par, VML_HSYNC_A)); + printk(KERN_DEBUG MODULE_NAME ": \tVTOTAL_A : 0x%08x\n", + (unsigned)VML_READ32(par, VML_VTOTAL_A)); + printk(KERN_DEBUG MODULE_NAME ": \tVBLANK_A : 0x%08x\n", + (unsigned)VML_READ32(par, VML_VBLANK_A)); + printk(KERN_DEBUG MODULE_NAME ": \tVSYNC_A : 0x%08x\n", + (unsigned)VML_READ32(par, VML_VSYNC_A)); + printk(KERN_DEBUG MODULE_NAME ": \tDSPCSTRIDE : 0x%08x\n", + (unsigned)VML_READ32(par, VML_DSPCSTRIDE)); + printk(KERN_DEBUG MODULE_NAME ": \tDSPCSIZE : 0x%08x\n", + (unsigned)VML_READ32(par, VML_DSPCSIZE)); + printk(KERN_DEBUG MODULE_NAME ": \tDSPCPOS : 0x%08x\n", + (unsigned)VML_READ32(par, VML_DSPCPOS)); + printk(KERN_DEBUG MODULE_NAME ": \tDSPARB : 0x%08x\n", + (unsigned)VML_READ32(par, VML_DSPARB)); + printk(KERN_DEBUG MODULE_NAME ": \tDSPCADDR : 0x%08x\n", + (unsigned)VML_READ32(par, VML_DSPCADDR)); + printk(KERN_DEBUG MODULE_NAME ": \tBCLRPAT_A : 0x%08x\n", + (unsigned)VML_READ32(par, VML_BCLRPAT_A)); + printk(KERN_DEBUG MODULE_NAME ": \tCANVSCLR_A : 0x%08x\n", + (unsigned)VML_READ32(par, VML_CANVSCLR_A)); + printk(KERN_DEBUG MODULE_NAME ": \tPIPEASRC : 0x%08x\n", + (unsigned)VML_READ32(par, VML_PIPEASRC)); + printk(KERN_DEBUG MODULE_NAME ": \tPIPEACONF : 0x%08x\n", + (unsigned)VML_READ32(par, VML_PIPEACONF)); + printk(KERN_DEBUG MODULE_NAME ": \tDSPCCNTR : 0x%08x\n", + (unsigned)VML_READ32(par, VML_DSPCCNTR)); + printk(KERN_DEBUG MODULE_NAME ": \tRCOMPSTAT : 0x%08x\n", + (unsigned)VML_READ32(par, VML_RCOMPSTAT)); + printk(KERN_DEBUG MODULE_NAME ": End of modesetting register dump.\n"); +} +#endif + +static int vmlfb_set_par_locked(struct vml_info *vinfo) +{ + struct vml_par *par = vinfo->par; + struct fb_info *info = &vinfo->info; + struct fb_var_screeninfo *var = &info->var; + u32 htotal, hactive, hblank_start, hblank_end, hsync_start, hsync_end; + u32 vtotal, vactive, vblank_start, vblank_end, vsync_start, vsync_end; + u32 dspcntr; + int clock; + + vinfo->bytes_per_pixel = var->bits_per_pixel >> 3; + vinfo->stride = + __ALIGN_MASK(var->xres_virtual * vinfo->bytes_per_pixel, 0x3F); + info->fix.line_length = vinfo->stride; + + if (!subsys) + return 0; + + htotal = + var->xres + var->right_margin + var->hsync_len + var->left_margin; + hactive = var->xres; + hblank_start = var->xres; + hblank_end = htotal; + hsync_start = hactive + var->right_margin; + hsync_end = hsync_start + var->hsync_len; + + vtotal = + var->yres + var->lower_margin + var->vsync_len + var->upper_margin; + vactive = var->yres; + vblank_start = var->yres; + vblank_end = vtotal; + vsync_start = vactive + var->lower_margin; + vsync_end = vsync_start + var->vsync_len; + + dspcntr = VML_GFX_ENABLE | VML_GFX_GAMMABYPASS; + clock = PICOS2KHZ(var->pixclock); + + if (subsys->nearest_clock) { + clock = subsys->nearest_clock(subsys, clock); + } else { + clock = vml_nearest_clock(clock); + } + printk(KERN_DEBUG MODULE_NAME + ": Set mode Hfreq : %d kHz, Vfreq : %d Hz.\n", clock / htotal, + ((clock / htotal) * 1000) / vtotal); + + switch (var->bits_per_pixel) { + case 16: + dspcntr |= VML_GFX_ARGB1555; + break; + case 32: + if (var->transp.length == 8) + dspcntr |= VML_GFX_ARGB8888 | VML_GFX_ALPHAMULT; + else + dspcntr |= VML_GFX_RGB0888; + break; + default: + return -EINVAL; + } + + vmlfb_disable_pipe(vinfo); + mb(); + + if (subsys->set_clock) + subsys->set_clock(subsys, clock); + else + return -EINVAL; + + VML_WRITE32(par, VML_HTOTAL_A, ((htotal - 1) << 16) | (hactive - 1)); + VML_WRITE32(par, VML_HBLANK_A, + ((hblank_end - 1) << 16) | (hblank_start - 1)); + VML_WRITE32(par, VML_HSYNC_A, + ((hsync_end - 1) << 16) | (hsync_start - 1)); + VML_WRITE32(par, VML_VTOTAL_A, ((vtotal - 1) << 16) | (vactive - 1)); + VML_WRITE32(par, VML_VBLANK_A, + ((vblank_end - 1) << 16) | (vblank_start - 1)); + VML_WRITE32(par, VML_VSYNC_A, + ((vsync_end - 1) << 16) | (vsync_start - 1)); + VML_WRITE32(par, VML_DSPCSTRIDE, vinfo->stride); + VML_WRITE32(par, VML_DSPCSIZE, + ((var->yres - 1) << 16) | (var->xres - 1)); + VML_WRITE32(par, VML_DSPCPOS, 0x00000000); + VML_WRITE32(par, VML_DSPARB, VML_FIFO_DEFAULT); + VML_WRITE32(par, VML_BCLRPAT_A, 0x00000000); + VML_WRITE32(par, VML_CANVSCLR_A, 0x00000000); + VML_WRITE32(par, VML_PIPEASRC, + ((var->xres - 1) << 16) | (var->yres - 1)); + + wmb(); + VML_WRITE32(par, VML_PIPEACONF, VML_PIPE_ENABLE); + wmb(); + VML_WRITE32(par, VML_DSPCCNTR, dspcntr); + wmb(); + VML_WRITE32(par, VML_DSPCADDR, (u32) vinfo->vram_start + + var->yoffset * vinfo->stride + + var->xoffset * vinfo->bytes_per_pixel); + + VML_WRITE32(par, VML_RCOMPSTAT, VML_MDVO_PAD_ENABLE); + + while (!(VML_READ32(par, VML_RCOMPSTAT) & + (VML_MDVO_VDC_I_RCOMP | VML_MDVO_PAD_ENABLE))) ; + + vinfo->pipe_disabled = 0; +#ifdef VERMILION_DEBUG + vml_dump_regs(vinfo); +#endif + + return 0; +} + +static int vmlfb_set_par(struct fb_info *info) +{ + struct vml_info *vinfo = container_of(info, struct vml_info, info); + int ret; + + mutex_lock(&vml_mutex); + list_del(&vinfo->head); + list_add(&vinfo->head, (subsys) ? &global_has_mode : &global_no_mode); + ret = vmlfb_set_par_locked(vinfo); + + mutex_unlock(&vml_mutex); + return ret; +} + +static int vmlfb_blank_locked(struct vml_info *vinfo) +{ + struct vml_par *par = vinfo->par; + u32 cur = VML_READ32(par, VML_PIPEACONF); + + switch (vinfo->cur_blank_mode) { + case FB_BLANK_UNBLANK: + if (vinfo->pipe_disabled) { + vmlfb_set_par_locked(vinfo); + } + VML_WRITE32(par, VML_PIPEACONF, cur & ~VML_PIPE_FORCE_BORDER); + (void)VML_READ32(par, VML_PIPEACONF); + break; + case FB_BLANK_NORMAL: + if (vinfo->pipe_disabled) { + vmlfb_set_par_locked(vinfo); + } + VML_WRITE32(par, VML_PIPEACONF, cur | VML_PIPE_FORCE_BORDER); + (void)VML_READ32(par, VML_PIPEACONF); + break; + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + if (!vinfo->pipe_disabled) { + vmlfb_disable_pipe(vinfo); + } + break; + case FB_BLANK_POWERDOWN: + if (!vinfo->pipe_disabled) { + vmlfb_disable_pipe(vinfo); + } + break; + default: + return -EINVAL; + } + + return 0; +} + +static int vmlfb_blank(int blank_mode, struct fb_info *info) +{ + struct vml_info *vinfo = container_of(info, struct vml_info, info); + int ret; + + mutex_lock(&vml_mutex); + vinfo->cur_blank_mode = blank_mode; + ret = vmlfb_blank_locked(vinfo); + mutex_unlock(&vml_mutex); + return ret; +} + +static int vmlfb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct vml_info *vinfo = container_of(info, struct vml_info, info); + struct vml_par *par = vinfo->par; + + mutex_lock(&vml_mutex); + VML_WRITE32(par, VML_DSPCADDR, (u32) vinfo->vram_start + + var->yoffset * vinfo->stride + + var->xoffset * vinfo->bytes_per_pixel); + (void)VML_READ32(par, VML_DSPCADDR); + mutex_unlock(&vml_mutex); + + return 0; +} + +static int vmlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, + u_int transp, struct fb_info *info) +{ + u32 v; + + if (regno >= 16) + return -EINVAL; + + if (info->var.grayscale) { + red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; + } + + if (info->fix.visual != FB_VISUAL_TRUECOLOR) + return -EINVAL; + + red = VML_TOHW(red, info->var.red.length); + blue = VML_TOHW(blue, info->var.blue.length); + green = VML_TOHW(green, info->var.green.length); + transp = VML_TOHW(transp, info->var.transp.length); + + v = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset) | + (transp << info->var.transp.offset); + + switch (info->var.bits_per_pixel) { + case 16: + ((u32 *) info->pseudo_palette)[regno] = v; + break; + case 24: + case 32: + ((u32 *) info->pseudo_palette)[regno] = v; + break; + } + return 0; +} + +static int vmlfb_mmap(struct fb_info *info, struct vm_area_struct *vma) +{ + struct vml_info *vinfo = container_of(info, struct vml_info, info); + unsigned long size = vma->vm_end - vma->vm_start; + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + int ret; + + if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) + return -EINVAL; + if (offset + size > vinfo->vram_contig_size) + return -EINVAL; + ret = vmlfb_vram_offset(vinfo, offset); + if (ret) + return -EINVAL; + offset += vinfo->vram_start; + pgprot_val(vma->vm_page_prot) |= _PAGE_PCD; + pgprot_val(vma->vm_page_prot) &= ~_PAGE_PWT; + vma->vm_flags |= VM_RESERVED | VM_IO; + if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT, + size, vma->vm_page_prot)) + return -EAGAIN; + return 0; +} + +static int vmlfb_sync(struct fb_info *info) +{ + return 0; +} + +static int vmlfb_cursor(struct fb_info *info, struct fb_cursor *cursor) +{ + return -EINVAL; /* just to force soft_cursor() call */ +} + +static struct fb_ops vmlfb_ops = { + .owner = THIS_MODULE, + .fb_open = vmlfb_open, + .fb_release = vmlfb_release, + .fb_check_var = vmlfb_check_var, + .fb_set_par = vmlfb_set_par, + .fb_blank = vmlfb_blank, + .fb_pan_display = vmlfb_pan_display, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_cursor = vmlfb_cursor, + .fb_sync = vmlfb_sync, + .fb_mmap = vmlfb_mmap, + .fb_setcolreg = vmlfb_setcolreg +}; + +static struct pci_device_id vml_ids[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, VML_DEVICE_VDC)}, + {0} +}; + +static struct pci_driver vmlfb_pci_driver = { + .name = "vmlfb", + .id_table = vml_ids, + .probe = vml_pci_probe, + .remove = __devexit_p(vml_pci_remove) +}; + +static void __exit vmlfb_cleanup(void) +{ + pci_unregister_driver(&vmlfb_pci_driver); +} + +static int __init vmlfb_init(void) +{ + +#ifndef MODULE + char *option = NULL; + + if (fb_get_options(MODULE_NAME, &option)) + return -ENODEV; +#endif + + printk(KERN_DEBUG MODULE_NAME ": initializing\n"); + mutex_init(&vml_mutex); + INIT_LIST_HEAD(&global_no_mode); + INIT_LIST_HEAD(&global_has_mode); + + return pci_register_driver(&vmlfb_pci_driver); +} + +int vmlfb_register_subsys(struct vml_sys *sys) +{ + struct vml_info *entry; + struct list_head *list; + u32 save_activate; + + mutex_lock(&vml_mutex); + if (subsys != NULL) { + subsys->restore(subsys); + } + subsys = sys; + subsys->save(subsys); + + /* + * We need to restart list traversal for each item, since we + * release the list mutex in the loop. + */ + + list = global_no_mode.next; + while (list != &global_no_mode) { + list_del_init(list); + entry = list_entry(list, struct vml_info, head); + + /* + * First, try the current mode which might not be + * completely validated with respect to the pixel clock. + */ + + if (!vmlfb_check_var_locked(&entry->info.var, entry)) { + vmlfb_set_par_locked(entry); + list_add_tail(list, &global_has_mode); + } else { + + /* + * Didn't work. Try to find another mode, + * that matches this subsys. + */ + + mutex_unlock(&vml_mutex); + save_activate = entry->info.var.activate; + entry->info.var.bits_per_pixel = 16; + vmlfb_set_pref_pixel_format(&entry->info.var); + if (fb_find_mode(&entry->info.var, + &entry->info, + vml_default_mode, NULL, 0, NULL, 16)) { + entry->info.var.activate |= + FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; + fb_set_var(&entry->info, &entry->info.var); + } else { + printk(KERN_ERR MODULE_NAME + ": Sorry. no mode found for this subsys.\n"); + } + entry->info.var.activate = save_activate; + mutex_lock(&vml_mutex); + } + vmlfb_blank_locked(entry); + list = global_no_mode.next; + } + mutex_unlock(&vml_mutex); + + printk(KERN_DEBUG MODULE_NAME ": Registered %s subsystem.\n", + subsys->name ? subsys->name : "unknown"); + return 0; +} + +EXPORT_SYMBOL_GPL(vmlfb_register_subsys); + +void vmlfb_unregister_subsys(struct vml_sys *sys) +{ + struct vml_info *entry, *next; + + mutex_lock(&vml_mutex); + if (subsys != sys) { + mutex_unlock(&vml_mutex); + return; + } + subsys->restore(subsys); + subsys = NULL; + list_for_each_entry_safe(entry, next, &global_has_mode, head) { + printk(KERN_DEBUG MODULE_NAME ": subsys disable pipe\n"); + vmlfb_disable_pipe(entry); + list_del(&entry->head); + list_add_tail(&entry->head, &global_no_mode); + } + mutex_unlock(&vml_mutex); +} + +EXPORT_SYMBOL_GPL(vmlfb_unregister_subsys); + +module_init(vmlfb_init); +module_exit(vmlfb_cleanup); + +MODULE_AUTHOR("Tungsten Graphics"); +MODULE_DESCRIPTION("Initialization of the Vermilion display devices"); +MODULE_VERSION("1.0.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/vermilion/vermilion.h b/drivers/video/vermilion/vermilion.h new file mode 100644 index 000000000000..1fc6695a49d2 --- /dev/null +++ b/drivers/video/vermilion/vermilion.h @@ -0,0 +1,260 @@ +/* + * Copyright (c) Intel Corp. 2007. + * All Rights Reserved. + * + * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to + * develop this driver. + * + * This file is part of the Vermilion Range fb driver. + * The Vermilion Range fb driver is free software; + * you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The Vermilion Range fb driver is distributed + * in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: + * Thomas Hellström <thomas-at-tungstengraphics-dot-com> + */ + +#ifndef _VERMILION_H_ +#define _VERMILION_H_ + +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/pci.h> +#include <asm/atomic.h> +#include <linux/mutex.h> + +#define VML_DEVICE_GPU 0x5002 +#define VML_DEVICE_VDC 0x5009 + +#define VML_VRAM_AREAS 3 +#define VML_MAX_XRES 1024 +#define VML_MAX_YRES 768 +#define VML_MAX_XRES_VIRTUAL 1040 + +/* + * Display controller registers: + */ + +/* Display controller 10-bit color representation */ + +#define VML_R_MASK 0x3FF00000 +#define VML_R_SHIFT 20 +#define VML_G_MASK 0x000FFC00 +#define VML_G_SHIFT 10 +#define VML_B_MASK 0x000003FF +#define VML_B_SHIFT 0 + +/* Graphics plane control */ +#define VML_DSPCCNTR 0x00072180 +#define VML_GFX_ENABLE 0x80000000 +#define VML_GFX_GAMMABYPASS 0x40000000 +#define VML_GFX_ARGB1555 0x0C000000 +#define VML_GFX_RGB0888 0x18000000 +#define VML_GFX_ARGB8888 0x1C000000 +#define VML_GFX_ALPHACONST 0x02000000 +#define VML_GFX_ALPHAMULT 0x01000000 +#define VML_GFX_CONST_ALPHA 0x000000FF + +/* Graphics plane start address. Pixel aligned. */ +#define VML_DSPCADDR 0x00072184 + +/* Graphics plane stride register. */ +#define VML_DSPCSTRIDE 0x00072188 + +/* Graphics plane position register. */ +#define VML_DSPCPOS 0x0007218C +#define VML_POS_YMASK 0x0FFF0000 +#define VML_POS_YSHIFT 16 +#define VML_POS_XMASK 0x00000FFF +#define VML_POS_XSHIFT 0 + +/* Graphics plane height and width */ +#define VML_DSPCSIZE 0x00072190 +#define VML_SIZE_HMASK 0x0FFF0000 +#define VML_SIZE_HSHIFT 16 +#define VML_SISE_WMASK 0x00000FFF +#define VML_SIZE_WSHIFT 0 + +/* Graphics plane gamma correction lookup table registers (129 * 32 bits) */ +#define VML_DSPCGAMLUT 0x00072200 + +/* Pixel video output configuration register */ +#define VML_PVOCONFIG 0x00061140 +#define VML_CONFIG_BASE 0x80000000 +#define VML_CONFIG_PIXEL_SWAP 0x04000000 +#define VML_CONFIG_DE_INV 0x01000000 +#define VML_CONFIG_HREF_INV 0x00400000 +#define VML_CONFIG_VREF_INV 0x00100000 +#define VML_CONFIG_CLK_INV 0x00040000 +#define VML_CONFIG_CLK_DIV2 0x00010000 +#define VML_CONFIG_ESTRB_INV 0x00008000 + +/* Pipe A Horizontal total register */ +#define VML_HTOTAL_A 0x00060000 +#define VML_HTOTAL_MASK 0x1FFF0000 +#define VML_HTOTAL_SHIFT 16 +#define VML_HTOTAL_VAL 8192 +#define VML_HACTIVE_MASK 0x000007FF +#define VML_HACTIVE_SHIFT 0 +#define VML_HACTIVE_VAL 4096 + +/* Pipe A Horizontal Blank register */ +#define VML_HBLANK_A 0x00060004 +#define VML_HBLANK_END_MASK 0x1FFF0000 +#define VML_HBLANK_END_SHIFT 16 +#define VML_HBLANK_END_VAL 8192 +#define VML_HBLANK_START_MASK 0x00001FFF +#define VML_HBLANK_START_SHIFT 0 +#define VML_HBLANK_START_VAL 8192 + +/* Pipe A Horizontal Sync register */ +#define VML_HSYNC_A 0x00060008 +#define VML_HSYNC_END_MASK 0x1FFF0000 +#define VML_HSYNC_END_SHIFT 16 +#define VML_HSYNC_END_VAL 8192 +#define VML_HSYNC_START_MASK 0x00001FFF +#define VML_HSYNC_START_SHIFT 0 +#define VML_HSYNC_START_VAL 8192 + +/* Pipe A Vertical total register */ +#define VML_VTOTAL_A 0x0006000C +#define VML_VTOTAL_MASK 0x1FFF0000 +#define VML_VTOTAL_SHIFT 16 +#define VML_VTOTAL_VAL 8192 +#define VML_VACTIVE_MASK 0x000007FF +#define VML_VACTIVE_SHIFT 0 +#define VML_VACTIVE_VAL 4096 + +/* Pipe A Vertical Blank register */ +#define VML_VBLANK_A 0x00060010 +#define VML_VBLANK_END_MASK 0x1FFF0000 +#define VML_VBLANK_END_SHIFT 16 +#define VML_VBLANK_END_VAL 8192 +#define VML_VBLANK_START_MASK 0x00001FFF +#define VML_VBLANK_START_SHIFT 0 +#define VML_VBLANK_START_VAL 8192 + +/* Pipe A Vertical Sync register */ +#define VML_VSYNC_A 0x00060014 +#define VML_VSYNC_END_MASK 0x1FFF0000 +#define VML_VSYNC_END_SHIFT 16 +#define VML_VSYNC_END_VAL 8192 +#define VML_VSYNC_START_MASK 0x00001FFF +#define VML_VSYNC_START_SHIFT 0 +#define VML_VSYNC_START_VAL 8192 + +/* Pipe A Source Image size (minus one - equal to active size) + * Programmable while pipe is enabled. + */ +#define VML_PIPEASRC 0x0006001C +#define VML_PIPEASRC_HMASK 0x0FFF0000 +#define VML_PIPEASRC_HSHIFT 16 +#define VML_PIPEASRC_VMASK 0x00000FFF +#define VML_PIPEASRC_VSHIFT 0 + +/* Pipe A Border Color Pattern register (10 bit color) */ +#define VML_BCLRPAT_A 0x00060020 + +/* Pipe A Canvas Color register (10 bit color) */ +#define VML_CANVSCLR_A 0x00060024 + +/* Pipe A Configuration register */ +#define VML_PIPEACONF 0x00070008 +#define VML_PIPE_BASE 0x00000000 +#define VML_PIPE_ENABLE 0x80000000 +#define VML_PIPE_FORCE_BORDER 0x02000000 +#define VML_PIPE_PLANES_OFF 0x00080000 +#define VML_PIPE_ARGB_OUTPUT_MODE 0x00040000 + +/* Pipe A FIFO setting */ +#define VML_DSPARB 0x00070030 +#define VML_FIFO_DEFAULT 0x00001D9C + +/* MDVO rcomp status & pads control register */ +#define VML_RCOMPSTAT 0x00070048 +#define VML_MDVO_VDC_I_RCOMP 0x80000000 +#define VML_MDVO_POWERSAVE_OFF 0x00000008 +#define VML_MDVO_PAD_ENABLE 0x00000004 +#define VML_MDVO_PULLDOWN_ENABLE 0x00000001 + +struct vml_par { + struct pci_dev *vdc; + u64 vdc_mem_base; + u64 vdc_mem_size; + char __iomem *vdc_mem; + + struct pci_dev *gpu; + u64 gpu_mem_base; + u64 gpu_mem_size; + char __iomem *gpu_mem; + + atomic_t refcount; +}; + +struct vram_area { + unsigned long logical; + unsigned long phys; + unsigned long size; + unsigned order; +}; + +struct vml_info { + struct fb_info info; + struct vml_par *par; + struct list_head head; + struct vram_area vram[VML_VRAM_AREAS]; + u64 vram_start; + u64 vram_contig_size; + u32 num_areas; + void __iomem *vram_logical; + u32 pseudo_palette[16]; + u32 stride; + u32 bytes_per_pixel; + atomic_t vmas; + int cur_blank_mode; + int pipe_disabled; +}; + +/* + * Subsystem + */ + +struct vml_sys { + char *name; + + /* + * Save / Restore; + */ + + int (*save) (struct vml_sys * sys); + int (*restore) (struct vml_sys * sys); + + /* + * PLL programming; + */ + + int (*set_clock) (struct vml_sys * sys, int clock); + int (*nearest_clock) (const struct vml_sys * sys, int clock); +}; + +extern int vmlfb_register_subsys(struct vml_sys *sys); +extern void vmlfb_unregister_subsys(struct vml_sys *sys); + +#define VML_READ32(_par, _offset) \ + (ioread32((_par)->vdc_mem + (_offset))) +#define VML_WRITE32(_par, _offset, _value) \ + iowrite32(_value, (_par)->vdc_mem + (_offset)) + +#endif diff --git a/drivers/video/vfb.c b/drivers/video/vfb.c index a9b99b01bd8e..64ee78c3c12b 100644 --- a/drivers/video/vfb.c +++ b/drivers/video/vfb.c @@ -84,13 +84,15 @@ static int vfb_mmap(struct fb_info *info, struct vm_area_struct *vma); static struct fb_ops vfb_ops = { + .fb_read = fb_sys_read, + .fb_write = fb_sys_write, .fb_check_var = vfb_check_var, .fb_set_par = vfb_set_par, .fb_setcolreg = vfb_setcolreg, .fb_pan_display = vfb_pan_display, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, + .fb_fillrect = sys_fillrect, + .fb_copyarea = sys_copyarea, + .fb_imageblit = sys_imageblit, .fb_mmap = vfb_mmap, }; diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c index ec4c7dc54a66..2a14d28c4163 100644 --- a/drivers/video/vga16fb.c +++ b/drivers/video/vga16fb.c @@ -1378,6 +1378,8 @@ static int __init vga16fb_probe(struct platform_device *dev) info->fbops = &vga16fb_ops; info->var = vga16fb_defined; info->fix = vga16fb_fix; + /* supports rectangles with widths of multiples of 8 */ + info->pixmap.blit_x = 1 << 7 | 1 << 15 | 1 << 23 | 1 << 31; info->flags = FBINFO_FLAG_DEFAULT | FBINFO_HWACCEL_YPAN; diff --git a/drivers/video/vgastate.c b/drivers/video/vgastate.c index d94efafc77b5..b91c466225b9 100644 --- a/drivers/video/vgastate.c +++ b/drivers/video/vgastate.c @@ -50,23 +50,28 @@ static void save_vga_text(struct vgastate *state, void __iomem *fbbase) struct regstate *saved = (struct regstate *) state->vidstate; int i; u8 misc, attr10, gr4, gr5, gr6, seq1, seq2, seq4; + unsigned short iobase; /* if in graphics mode, no need to save */ + misc = vga_r(state->vgabase, VGA_MIS_R); + iobase = (misc & 1) ? 0x3d0 : 0x3b0; + + vga_r(state->vgabase, iobase + 0xa); + vga_w(state->vgabase, VGA_ATT_W, 0x00); attr10 = vga_rattr(state->vgabase, 0x10); + vga_r(state->vgabase, iobase + 0xa); + vga_w(state->vgabase, VGA_ATT_W, 0x20); + if (attr10 & 1) return; - + /* save regs */ - misc = vga_r(state->vgabase, VGA_MIS_R); gr4 = vga_rgfx(state->vgabase, VGA_GFX_PLANE_READ); gr5 = vga_rgfx(state->vgabase, VGA_GFX_MODE); gr6 = vga_rgfx(state->vgabase, VGA_GFX_MISC); seq2 = vga_rseq(state->vgabase, VGA_SEQ_PLANE_WRITE); seq4 = vga_rseq(state->vgabase, VGA_SEQ_MEMORY_MODE); - /* force graphics mode */ - vga_w(state->vgabase, VGA_MIS_W, misc | 1); - /* blank screen */ seq1 = vga_rseq(state->vgabase, VGA_SEQ_CLOCK_MODE); vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1); @@ -115,15 +120,12 @@ static void save_vga_text(struct vgastate *state, void __iomem *fbbase) } /* restore regs */ - vga_wattr(state->vgabase, 0x10, attr10); - vga_wseq(state->vgabase, VGA_SEQ_PLANE_WRITE, seq2); vga_wseq(state->vgabase, VGA_SEQ_MEMORY_MODE, seq4); vga_wgfx(state->vgabase, VGA_GFX_PLANE_READ, gr4); vga_wgfx(state->vgabase, VGA_GFX_MODE, gr5); vga_wgfx(state->vgabase, VGA_GFX_MISC, gr6); - vga_w(state->vgabase, VGA_MIS_W, misc); /* unblank screen */ vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1); @@ -137,11 +139,10 @@ static void restore_vga_text(struct vgastate *state, void __iomem *fbbase) { struct regstate *saved = (struct regstate *) state->vidstate; int i; - u8 misc, gr1, gr3, gr4, gr5, gr6, gr8; + u8 gr1, gr3, gr4, gr5, gr6, gr8; u8 seq1, seq2, seq4; /* save regs */ - misc = vga_r(state->vgabase, VGA_MIS_R); gr1 = vga_rgfx(state->vgabase, VGA_GFX_SR_ENABLE); gr3 = vga_rgfx(state->vgabase, VGA_GFX_DATA_ROTATE); gr4 = vga_rgfx(state->vgabase, VGA_GFX_PLANE_READ); @@ -151,9 +152,6 @@ static void restore_vga_text(struct vgastate *state, void __iomem *fbbase) seq2 = vga_rseq(state->vgabase, VGA_SEQ_PLANE_WRITE); seq4 = vga_rseq(state->vgabase, VGA_SEQ_MEMORY_MODE); - /* force graphics mode */ - vga_w(state->vgabase, VGA_MIS_W, misc | 1); - /* blank screen */ seq1 = vga_rseq(state->vgabase, VGA_SEQ_CLOCK_MODE); vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x1); @@ -213,8 +211,6 @@ static void restore_vga_text(struct vgastate *state, void __iomem *fbbase) vga_wseq(state->vgabase, VGA_SEQ_RESET, 0x3); /* restore regs */ - vga_w(state->vgabase, VGA_MIS_W, misc); - vga_wgfx(state->vgabase, VGA_GFX_SR_ENABLE, gr1); vga_wgfx(state->vgabase, VGA_GFX_DATA_ROTATE, gr3); vga_wgfx(state->vgabase, VGA_GFX_PLANE_READ, gr4); diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c new file mode 100644 index 000000000000..1d29a89a86b4 --- /dev/null +++ b/drivers/video/xilinxfb.c @@ -0,0 +1,381 @@ +/* + * xilinxfb.c + * + * Xilinx TFT LCD frame buffer driver + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2002-2007 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +/* + * This driver was based on au1100fb.c by MontaVista rewritten for 2.6 + * by Embedded Alley Solutions <source@embeddedalley.com>, which in turn + * was based on skeletonfb.c, Skeleton for a frame buffer device by + * Geert Uytterhoeven. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> + +#include <asm/io.h> +#include <syslib/virtex_devices.h> + +#define DRIVER_NAME "xilinxfb" +#define DRIVER_DESCRIPTION "Xilinx TFT LCD frame buffer driver" + +/* + * Xilinx calls it "PLB TFT LCD Controller" though it can also be used for + * the VGA port on the Xilinx ML40x board. This is a hardware display controller + * for a 640x480 resolution TFT or VGA screen. + * + * The interface to the framebuffer is nice and simple. There are two + * control registers. The first tells the LCD interface where in memory + * the frame buffer is (only the 11 most significant bits are used, so + * don't start thinking about scrolling). The second allows the LCD to + * be turned on or off as well as rotated 180 degrees. + */ +#define NUM_REGS 2 +#define REG_FB_ADDR 0 +#define REG_CTRL 1 +#define REG_CTRL_ENABLE 0x0001 +#define REG_CTRL_ROTATE 0x0002 + +/* + * The hardware only handles a single mode: 640x480 24 bit true + * color. Each pixel gets a word (32 bits) of memory. Within each word, + * the 8 most significant bits are ignored, the next 8 bits are the red + * level, the next 8 bits are the green level and the 8 least + * significant bits are the blue level. Each row of the LCD uses 1024 + * words, but only the first 640 pixels are displayed with the other 384 + * words being ignored. There are 480 rows. + */ +#define BYTES_PER_PIXEL 4 +#define BITS_PER_PIXEL (BYTES_PER_PIXEL * 8) +#define XRES 640 +#define YRES 480 +#define XRES_VIRTUAL 1024 +#define YRES_VIRTUAL YRES +#define LINE_LENGTH (XRES_VIRTUAL * BYTES_PER_PIXEL) +#define FB_SIZE (YRES_VIRTUAL * LINE_LENGTH) + +#define RED_SHIFT 16 +#define GREEN_SHIFT 8 +#define BLUE_SHIFT 0 + +#define PALETTE_ENTRIES_NO 16 /* passed to fb_alloc_cmap() */ + +/* + * Here are the default fb_fix_screeninfo and fb_var_screeninfo structures + */ +static struct fb_fix_screeninfo xilinx_fb_fix __initdata = { + .id = "Xilinx", + .type = FB_TYPE_PACKED_PIXELS, + .visual = FB_VISUAL_TRUECOLOR, + .smem_len = FB_SIZE, + .line_length = LINE_LENGTH, + .accel = FB_ACCEL_NONE +}; + +static struct fb_var_screeninfo xilinx_fb_var __initdata = { + .xres = XRES, + .yres = YRES, + .xres_virtual = XRES_VIRTUAL, + .yres_virtual = YRES_VIRTUAL, + + .bits_per_pixel = BITS_PER_PIXEL, + + .red = { RED_SHIFT, 8, 0 }, + .green = { GREEN_SHIFT, 8, 0 }, + .blue = { BLUE_SHIFT, 8, 0 }, + .transp = { 0, 0, 0 }, + + .activate = FB_ACTIVATE_NOW +}; + +struct xilinxfb_drvdata { + + struct fb_info info; /* FB driver info record */ + + u32 regs_phys; /* phys. address of the control registers */ + u32 __iomem *regs; /* virt. address of the control registers */ + + unsigned char __iomem *fb_virt; /* virt. address of the frame buffer */ + dma_addr_t fb_phys; /* phys. address of the frame buffer */ + + u32 reg_ctrl_default; + + u32 pseudo_palette[PALETTE_ENTRIES_NO]; + /* Fake palette of 16 colors */ +}; + +#define to_xilinxfb_drvdata(_info) \ + container_of(_info, struct xilinxfb_drvdata, info) + +/* + * The LCD controller has DCR interface to its registers, but all + * the boards and configurations the driver has been tested with + * use opb2dcr bridge. So the registers are seen as memory mapped. + * This macro is to make it simple to add the direct DCR access + * when it's needed. + */ +#define xilinx_fb_out_be32(driverdata, offset, val) \ + out_be32(driverdata->regs + offset, val) + +static int +xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, + unsigned transp, struct fb_info *fbi) +{ + u32 *palette = fbi->pseudo_palette; + + if (regno >= PALETTE_ENTRIES_NO) + return -EINVAL; + + if (fbi->var.grayscale) { + /* Convert color to grayscale. + * grayscale = 0.30*R + 0.59*G + 0.11*B */ + red = green = blue = + (red * 77 + green * 151 + blue * 28 + 127) >> 8; + } + + /* fbi->fix.visual is always FB_VISUAL_TRUECOLOR */ + + /* We only handle 8 bits of each color. */ + red >>= 8; + green >>= 8; + blue >>= 8; + palette[regno] = (red << RED_SHIFT) | (green << GREEN_SHIFT) | + (blue << BLUE_SHIFT); + + return 0; +} + +static int +xilinx_fb_blank(int blank_mode, struct fb_info *fbi) +{ + struct xilinxfb_drvdata *drvdata = to_xilinxfb_drvdata(fbi); + + switch (blank_mode) { + case FB_BLANK_UNBLANK: + /* turn on panel */ + xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); + break; + + case FB_BLANK_NORMAL: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_POWERDOWN: + /* turn off panel */ + xilinx_fb_out_be32(drvdata, REG_CTRL, 0); + default: + break; + + } + return 0; /* success */ +} + +static struct fb_ops xilinxfb_ops = +{ + .owner = THIS_MODULE, + .fb_setcolreg = xilinx_fb_setcolreg, + .fb_blank = xilinx_fb_blank, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +/* === The device driver === */ + +static int +xilinxfb_drv_probe(struct device *dev) +{ + struct platform_device *pdev; + struct xilinxfb_platform_data *pdata; + struct xilinxfb_drvdata *drvdata; + struct resource *regs_res; + int retval; + + if (!dev) + return -EINVAL; + + pdev = to_platform_device(dev); + pdata = pdev->dev.platform_data; + + if (pdata == NULL) { + printk(KERN_ERR "Couldn't find platform data.\n"); + return -EFAULT; + } + + drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); + if (!drvdata) { + printk(KERN_ERR "Couldn't allocate device private record\n"); + return -ENOMEM; + } + dev_set_drvdata(dev, drvdata); + + /* Map the control registers in */ + regs_res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!regs_res || (regs_res->end - regs_res->start + 1 < 8)) { + printk(KERN_ERR "Couldn't get registers resource\n"); + retval = -EFAULT; + goto failed1; + } + + if (!request_mem_region(regs_res->start, 8, DRIVER_NAME)) { + printk(KERN_ERR + "Couldn't lock memory region at 0x%08X\n", + regs_res->start); + retval = -EBUSY; + goto failed1; + } + drvdata->regs = (u32 __iomem*) ioremap(regs_res->start, 8); + drvdata->regs_phys = regs_res->start; + + /* Allocate the framebuffer memory */ + drvdata->fb_virt = dma_alloc_coherent(dev, PAGE_ALIGN(FB_SIZE), + &drvdata->fb_phys, GFP_KERNEL); + if (!drvdata->fb_virt) { + printk(KERN_ERR "Could not allocate frame buffer memory\n"); + retval = -ENOMEM; + goto failed2; + } + + /* Clear (turn to black) the framebuffer */ + memset_io((void *) drvdata->fb_virt, 0, FB_SIZE); + + /* Tell the hardware where the frame buffer is */ + xilinx_fb_out_be32(drvdata, REG_FB_ADDR, drvdata->fb_phys); + + /* Turn on the display */ + if (pdata->rotate_screen) { + drvdata->reg_ctrl_default = REG_CTRL_ENABLE | REG_CTRL_ROTATE; + } else { + drvdata->reg_ctrl_default = REG_CTRL_ENABLE; + } + xilinx_fb_out_be32(drvdata, REG_CTRL, drvdata->reg_ctrl_default); + + /* Fill struct fb_info */ + drvdata->info.device = dev; + drvdata->info.screen_base = drvdata->fb_virt; + drvdata->info.fbops = &xilinxfb_ops; + drvdata->info.fix = xilinx_fb_fix; + drvdata->info.fix.smem_start = drvdata->fb_phys; + drvdata->info.pseudo_palette = drvdata->pseudo_palette; + + if (fb_alloc_cmap(&drvdata->info.cmap, PALETTE_ENTRIES_NO, 0) < 0) { + printk(KERN_ERR "Fail to allocate colormap (%d entries)\n", + PALETTE_ENTRIES_NO); + retval = -EFAULT; + goto failed3; + } + + drvdata->info.flags = FBINFO_DEFAULT; + xilinx_fb_var.height = pdata->screen_height_mm; + xilinx_fb_var.width = pdata->screen_width_mm; + drvdata->info.var = xilinx_fb_var; + + /* Register new frame buffer */ + if (register_framebuffer(&drvdata->info) < 0) { + printk(KERN_ERR "Could not register frame buffer\n"); + retval = -EINVAL; + goto failed4; + } + + return 0; /* success */ + +failed4: + fb_dealloc_cmap(&drvdata->info.cmap); + +failed3: + dma_free_coherent(dev, PAGE_ALIGN(FB_SIZE), drvdata->fb_virt, + drvdata->fb_phys); + + /* Turn off the display */ + xilinx_fb_out_be32(drvdata, REG_CTRL, 0); + iounmap(drvdata->regs); + +failed2: + release_mem_region(regs_res->start, 8); + +failed1: + kfree(drvdata); + dev_set_drvdata(dev, NULL); + + return retval; +} + +static int +xilinxfb_drv_remove(struct device *dev) +{ + struct xilinxfb_drvdata *drvdata; + + if (!dev) + return -ENODEV; + + drvdata = (struct xilinxfb_drvdata *) dev_get_drvdata(dev); + +#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO) + xilinx_fb_blank(VESA_POWERDOWN, &drvdata->info); +#endif + + unregister_framebuffer(&drvdata->info); + + fb_dealloc_cmap(&drvdata->info.cmap); + + dma_free_coherent(dev, PAGE_ALIGN(FB_SIZE), drvdata->fb_virt, + drvdata->fb_phys); + + /* Turn off the display */ + xilinx_fb_out_be32(drvdata, REG_CTRL, 0); + iounmap(drvdata->regs); + + release_mem_region(drvdata->regs_phys, 8); + + kfree(drvdata); + dev_set_drvdata(dev, NULL); + + return 0; +} + + +static struct device_driver xilinxfb_driver = { + .name = DRIVER_NAME, + .bus = &platform_bus_type, + + .probe = xilinxfb_drv_probe, + .remove = xilinxfb_drv_remove +}; + +static int __init +xilinxfb_init(void) +{ + /* + * No kernel boot options used, + * so we just need to register the driver + */ + return driver_register(&xilinxfb_driver); +} + +static void __exit +xilinxfb_cleanup(void) +{ + driver_unregister(&xilinxfb_driver); +} + +module_init(xilinxfb_init); +module_exit(xilinxfb_cleanup); + +MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); +MODULE_DESCRIPTION(DRIVER_DESCRIPTION); +MODULE_LICENSE("GPL"); diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index 2fb425536eae..8f779338f744 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -35,5 +35,13 @@ config W1_MASTER_DS2482 This driver can also be built as a module. If so, the module will be called ds2482. +config W1_MASTER_DS1WM + tristate "Maxim DS1WM 1-wire busmaster" + depends on W1 && ARM + help + Say Y here to enable the DS1WM 1-wire driver, such as that + in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like + hx4700. + endmenu diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile index 4cee256a8134..11551b328186 100644 --- a/drivers/w1/masters/Makefile +++ b/drivers/w1/masters/Makefile @@ -5,4 +5,4 @@ obj-$(CONFIG_W1_MASTER_MATROX) += matrox_w1.o obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o - +obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c new file mode 100644 index 000000000000..763bc73e5070 --- /dev/null +++ b/drivers/w1/masters/ds1wm.c @@ -0,0 +1,468 @@ +/* + * 1-wire busmaster driver for DS1WM and ASICs with embedded DS1WMs + * such as HP iPAQs (including h5xxx, h2200, and devices with ASIC3 + * like hx4700). + * + * Copyright (c) 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> + * Copyright (c) 2004-2007, Matt Reimer <mreimer@vpop.net> + * + * Use consistent with the GNU GPL is permitted, + * provided that this copyright notice is + * preserved in its entirety in all copies and derived works. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/ds1wm.h> + +#include <asm/io.h> + +#include "../w1.h" +#include "../w1_int.h" + + +#define DS1WM_CMD 0x00 /* R/W 4 bits command */ +#define DS1WM_DATA 0x01 /* R/W 8 bits, transmit/receive buffer */ +#define DS1WM_INT 0x02 /* R/W interrupt status */ +#define DS1WM_INT_EN 0x03 /* R/W interrupt enable */ +#define DS1WM_CLKDIV 0x04 /* R/W 5 bits of divisor and pre-scale */ + +#define DS1WM_CMD_1W_RESET (1 << 0) /* force reset on 1-wire bus */ +#define DS1WM_CMD_SRA (1 << 1) /* enable Search ROM accelerator mode */ +#define DS1WM_CMD_DQ_OUTPUT (1 << 2) /* write only - forces bus low */ +#define DS1WM_CMD_DQ_INPUT (1 << 3) /* read only - reflects state of bus */ +#define DS1WM_CMD_RST (1 << 5) /* software reset */ +#define DS1WM_CMD_OD (1 << 7) /* overdrive */ + +#define DS1WM_INT_PD (1 << 0) /* presence detect */ +#define DS1WM_INT_PDR (1 << 1) /* presence detect result */ +#define DS1WM_INT_TBE (1 << 2) /* tx buffer empty */ +#define DS1WM_INT_TSRE (1 << 3) /* tx shift register empty */ +#define DS1WM_INT_RBF (1 << 4) /* rx buffer full */ +#define DS1WM_INT_RSRF (1 << 5) /* rx shift register full */ + +#define DS1WM_INTEN_EPD (1 << 0) /* enable presence detect int */ +#define DS1WM_INTEN_IAS (1 << 1) /* INTR active state */ +#define DS1WM_INTEN_ETBE (1 << 2) /* enable tx buffer empty int */ +#define DS1WM_INTEN_ETMT (1 << 3) /* enable tx shift register empty int */ +#define DS1WM_INTEN_ERBF (1 << 4) /* enable rx buffer full int */ +#define DS1WM_INTEN_ERSRF (1 << 5) /* enable rx shift register full int */ +#define DS1WM_INTEN_DQO (1 << 6) /* enable direct bus driving ops */ + + +#define DS1WM_TIMEOUT (HZ * 5) + +static struct { + unsigned long freq; + unsigned long divisor; +} freq[] = { + { 4000000, 0x8 }, + { 5000000, 0x2 }, + { 6000000, 0x5 }, + { 7000000, 0x3 }, + { 8000000, 0xc }, + { 10000000, 0x6 }, + { 12000000, 0x9 }, + { 14000000, 0x7 }, + { 16000000, 0x10 }, + { 20000000, 0xa }, + { 24000000, 0xd }, + { 28000000, 0xb }, + { 32000000, 0x14 }, + { 40000000, 0xe }, + { 48000000, 0x11 }, + { 56000000, 0xf }, + { 64000000, 0x18 }, + { 80000000, 0x12 }, + { 96000000, 0x15 }, + { 112000000, 0x13 }, + { 128000000, 0x1c }, +}; + +struct ds1wm_data { + void *map; + int bus_shift; /* # of shifts to calc register offsets */ + struct platform_device *pdev; + struct ds1wm_platform_data *pdata; + int irq; + int active_high; + struct clk *clk; + int slave_present; + void *reset_complete; + void *read_complete; + void *write_complete; + u8 read_byte; /* last byte received */ +}; + +static inline void ds1wm_write_register(struct ds1wm_data *ds1wm_data, u32 reg, + u8 val) +{ + __raw_writeb(val, ds1wm_data->map + (reg << ds1wm_data->bus_shift)); +} + +static inline u8 ds1wm_read_register(struct ds1wm_data *ds1wm_data, u32 reg) +{ + return __raw_readb(ds1wm_data->map + (reg << ds1wm_data->bus_shift)); +} + + +static irqreturn_t ds1wm_isr(int isr, void *data) +{ + struct ds1wm_data *ds1wm_data = data; + u8 intr = ds1wm_read_register(ds1wm_data, DS1WM_INT); + + ds1wm_data->slave_present = (intr & DS1WM_INT_PDR) ? 0 : 1; + + if ((intr & DS1WM_INT_PD) && ds1wm_data->reset_complete) + complete(ds1wm_data->reset_complete); + + if ((intr & DS1WM_INT_TSRE) && ds1wm_data->write_complete) + complete(ds1wm_data->write_complete); + + if (intr & DS1WM_INT_RBF) { + ds1wm_data->read_byte = ds1wm_read_register(ds1wm_data, + DS1WM_DATA); + if (ds1wm_data->read_complete) + complete(ds1wm_data->read_complete); + } + + return IRQ_HANDLED; +} + +static int ds1wm_reset(struct ds1wm_data *ds1wm_data) +{ + unsigned long timeleft; + DECLARE_COMPLETION_ONSTACK(reset_done); + + ds1wm_data->reset_complete = &reset_done; + + ds1wm_write_register(ds1wm_data, DS1WM_INT_EN, DS1WM_INTEN_EPD | + (ds1wm_data->active_high ? DS1WM_INTEN_IAS : 0)); + + ds1wm_write_register(ds1wm_data, DS1WM_CMD, DS1WM_CMD_1W_RESET); + + timeleft = wait_for_completion_timeout(&reset_done, DS1WM_TIMEOUT); + ds1wm_data->reset_complete = NULL; + if (!timeleft) { + dev_dbg(&ds1wm_data->pdev->dev, "reset failed\n"); + return 1; + } + + /* Wait for the end of the reset. According to the specs, the time + * from when the interrupt is asserted to the end of the reset is: + * tRSTH - tPDH - tPDL - tPDI + * 625 us - 60 us - 240 us - 100 ns = 324.9 us + * + * We'll wait a bit longer just to be sure. + */ + udelay(500); + + ds1wm_write_register(ds1wm_data, DS1WM_INT_EN, + DS1WM_INTEN_ERBF | DS1WM_INTEN_ETMT | DS1WM_INTEN_EPD | + (ds1wm_data->active_high ? DS1WM_INTEN_IAS : 0)); + + if (!ds1wm_data->slave_present) { + dev_dbg(&ds1wm_data->pdev->dev, "reset: no devices found\n"); + return 1; + } + + return 0; +} + +static int ds1wm_write(struct ds1wm_data *ds1wm_data, u8 data) +{ + DECLARE_COMPLETION_ONSTACK(write_done); + ds1wm_data->write_complete = &write_done; + + ds1wm_write_register(ds1wm_data, DS1WM_DATA, data); + + wait_for_completion_timeout(&write_done, DS1WM_TIMEOUT); + ds1wm_data->write_complete = NULL; + + return 0; +} + +static int ds1wm_read(struct ds1wm_data *ds1wm_data, unsigned char write_data) +{ + DECLARE_COMPLETION_ONSTACK(read_done); + ds1wm_data->read_complete = &read_done; + + ds1wm_write(ds1wm_data, write_data); + wait_for_completion_timeout(&read_done, DS1WM_TIMEOUT); + ds1wm_data->read_complete = NULL; + + return ds1wm_data->read_byte; +} + +static int ds1wm_find_divisor(int gclk) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(freq); i++) + if (gclk <= freq[i].freq) + return freq[i].divisor; + + return 0; +} + +static void ds1wm_up(struct ds1wm_data *ds1wm_data) +{ + int gclk, divisor; + + if (ds1wm_data->pdata->enable) + ds1wm_data->pdata->enable(ds1wm_data->pdev); + + gclk = clk_get_rate(ds1wm_data->clk); + clk_enable(ds1wm_data->clk); + divisor = ds1wm_find_divisor(gclk); + if (divisor == 0) { + dev_err(&ds1wm_data->pdev->dev, + "no suitable divisor for %dHz clock\n", gclk); + return; + } + ds1wm_write_register(ds1wm_data, DS1WM_CLKDIV, divisor); + + /* Let the w1 clock stabilize. */ + msleep(1); + + ds1wm_reset(ds1wm_data); +} + +static void ds1wm_down(struct ds1wm_data *ds1wm_data) +{ + ds1wm_reset(ds1wm_data); + + /* Disable interrupts. */ + ds1wm_write_register(ds1wm_data, DS1WM_INT_EN, + ds1wm_data->active_high ? DS1WM_INTEN_IAS : 0); + + if (ds1wm_data->pdata->disable) + ds1wm_data->pdata->disable(ds1wm_data->pdev); + + clk_disable(ds1wm_data->clk); +} + +/* --------------------------------------------------------------------- */ +/* w1 methods */ + +static u8 ds1wm_read_byte(void *data) +{ + struct ds1wm_data *ds1wm_data = data; + + return ds1wm_read(ds1wm_data, 0xff); +} + +static void ds1wm_write_byte(void *data, u8 byte) +{ + struct ds1wm_data *ds1wm_data = data; + + ds1wm_write(ds1wm_data, byte); +} + +static u8 ds1wm_reset_bus(void *data) +{ + struct ds1wm_data *ds1wm_data = data; + + ds1wm_reset(ds1wm_data); + + return 0; +} + +static void ds1wm_search(void *data, u8 search_type, + w1_slave_found_callback slave_found) +{ + struct ds1wm_data *ds1wm_data = data; + int i; + unsigned long long rom_id; + + /* XXX We need to iterate for multiple devices per the DS1WM docs. + * See http://www.maxim-ic.com/appnotes.cfm/appnote_number/120. */ + if (ds1wm_reset(ds1wm_data)) + return; + + ds1wm_write(ds1wm_data, search_type); + ds1wm_write_register(ds1wm_data, DS1WM_CMD, DS1WM_CMD_SRA); + + for (rom_id = 0, i = 0; i < 16; i++) { + + unsigned char resp, r, d; + + resp = ds1wm_read(ds1wm_data, 0x00); + + r = ((resp & 0x02) >> 1) | + ((resp & 0x08) >> 2) | + ((resp & 0x20) >> 3) | + ((resp & 0x80) >> 4); + + d = ((resp & 0x01) >> 0) | + ((resp & 0x04) >> 1) | + ((resp & 0x10) >> 2) | + ((resp & 0x40) >> 3); + + rom_id |= (unsigned long long) r << (i * 4); + + } + dev_dbg(&ds1wm_data->pdev->dev, "found 0x%08llX", rom_id); + + ds1wm_write_register(ds1wm_data, DS1WM_CMD, ~DS1WM_CMD_SRA); + ds1wm_reset(ds1wm_data); + + slave_found(ds1wm_data, rom_id); +} + +/* --------------------------------------------------------------------- */ + +static struct w1_bus_master ds1wm_master = { + .read_byte = ds1wm_read_byte, + .write_byte = ds1wm_write_byte, + .reset_bus = ds1wm_reset_bus, + .search = ds1wm_search, +}; + +static int ds1wm_probe(struct platform_device *pdev) +{ + struct ds1wm_data *ds1wm_data; + struct ds1wm_platform_data *plat; + struct resource *res; + int ret; + + if (!pdev) + return -ENODEV; + + ds1wm_data = kzalloc(sizeof (*ds1wm_data), GFP_KERNEL); + if (!ds1wm_data) + return -ENOMEM; + + platform_set_drvdata(pdev, ds1wm_data); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENXIO; + goto err0; + } + ds1wm_data->map = ioremap(res->start, res->end - res->start + 1); + if (!ds1wm_data->map) { + ret = -ENOMEM; + goto err0; + } + plat = pdev->dev.platform_data; + ds1wm_data->bus_shift = plat->bus_shift; + ds1wm_data->pdev = pdev; + ds1wm_data->pdata = plat; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + ret = -ENXIO; + goto err1; + } + ds1wm_data->irq = res->start; + ds1wm_data->active_high = (res->flags & IORESOURCE_IRQ_HIGHEDGE) ? + 1 : 0; + + set_irq_type(ds1wm_data->irq, ds1wm_data->active_high ? + IRQ_TYPE_EDGE_RISING : IRQ_TYPE_EDGE_FALLING); + + ret = request_irq(ds1wm_data->irq, ds1wm_isr, IRQF_DISABLED, + "ds1wm", ds1wm_data); + if (ret) + goto err1; + + ds1wm_data->clk = clk_get(&pdev->dev, "ds1wm"); + if (!ds1wm_data->clk) { + ret = -ENOENT; + goto err2; + } + + ds1wm_up(ds1wm_data); + + ds1wm_master.data = (void *)ds1wm_data; + + ret = w1_add_master_device(&ds1wm_master); + if (ret) + goto err3; + + return 0; + +err3: + ds1wm_down(ds1wm_data); + clk_put(ds1wm_data->clk); +err2: + free_irq(ds1wm_data->irq, ds1wm_data); +err1: + iounmap(ds1wm_data->map); +err0: + kfree(ds1wm_data); + + return ret; +} + +#ifdef CONFIG_PM +static int ds1wm_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct ds1wm_data *ds1wm_data = platform_get_drvdata(pdev); + + ds1wm_down(ds1wm_data); + + return 0; +} + +static int ds1wm_resume(struct platform_device *pdev) +{ + struct ds1wm_data *ds1wm_data = platform_get_drvdata(pdev); + + ds1wm_up(ds1wm_data); + + return 0; +} +#else +#define ds1wm_suspend NULL +#define ds1wm_resume NULL +#endif + +static int ds1wm_remove(struct platform_device *pdev) +{ + struct ds1wm_data *ds1wm_data = platform_get_drvdata(pdev); + + w1_remove_master_device(&ds1wm_master); + ds1wm_down(ds1wm_data); + clk_put(ds1wm_data->clk); + free_irq(ds1wm_data->irq, ds1wm_data); + iounmap(ds1wm_data->map); + kfree(ds1wm_data); + + return 0; +} + +static struct platform_driver ds1wm_driver = { + .driver = { + .name = "ds1wm", + }, + .probe = ds1wm_probe, + .remove = ds1wm_remove, + .suspend = ds1wm_suspend, + .resume = ds1wm_resume +}; + +static int __init ds1wm_init(void) +{ + printk("DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko\n"); + return platform_driver_register(&ds1wm_driver); +} + +static void __exit ds1wm_exit(void) +{ + platform_driver_unregister(&ds1wm_driver); +} + +module_init(ds1wm_init); +module_exit(ds1wm_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, " + "Matt Reimer <mreimer@vpop.net>"); +MODULE_DESCRIPTION("DS1WM w1 busmaster driver"); diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 63c07243993c..7d6876dbcc96 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -459,7 +459,7 @@ static int __w1_attach_slave_device(struct w1_slave *sl) (unsigned long long) sl->reg_num.id); dev_dbg(&sl->dev, "%s: registering %s as %p.\n", __func__, - &sl->dev.bus_id[0]); + &sl->dev.bus_id[0], sl); err = device_register(&sl->dev); if (err < 0) { diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c index 357a2e0f637a..258defdb2efd 100644 --- a/drivers/w1/w1_int.c +++ b/drivers/w1/w1_int.c @@ -100,7 +100,8 @@ int w1_add_master_device(struct w1_bus_master *master) /* validate minimum functionality */ if (!(master->touch_bit && master->reset_bus) && - !(master->write_bit && master->read_bit)) { + !(master->write_bit && master->read_bit) && + !(master->write_byte && master->read_byte && master->reset_bus)) { printk(KERN_ERR "w1_add_master_device: invalid function set\n"); return(-EINVAL); } |