diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 68 |
1 files changed, 52 insertions, 16 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 26f5557ed7c6..1c0466922523 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2135,18 +2135,52 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index); trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); - if (trb_comp_code == COMP_STOPPED_LENGTH_INVALID || - trb_comp_code == COMP_STOPPED || - trb_comp_code == COMP_STOPPED_SHORT_PACKET) { - /* The Endpoint Stop Command completion will take care of any - * stopped TDs. A stopped TD may be restarted, so don't update + switch (trb_comp_code) { + case COMP_STOPPED_LENGTH_INVALID: + case COMP_STOPPED_SHORT_PACKET: + case COMP_STOPPED: + /* + * The "Stop Endpoint" completion will take care of any + * stopped TDs. A stopped TD may be restarted, so don't update * the ring dequeue pointer or take this TD off any lists yet. */ return 0; - } - if (trb_comp_code == COMP_STALL_ERROR || - xhci_requires_manual_halt_cleanup(xhci, ep_ctx, - trb_comp_code)) { + case COMP_USB_TRANSACTION_ERROR: + case COMP_BABBLE_DETECTED_ERROR: + case COMP_SPLIT_TRANSACTION_ERROR: + /* + * If endpoint context state is not halted we might be + * racing with a reset endpoint command issued by a unsuccessful + * stop endpoint completion (context error). In that case the + * td should be on the cancelled list, and EP_HALTED flag set. + * + * Or then it's not halted due to the 0.95 spec stating that a + * babbling control endpoint should not halt. The 0.96 spec + * again says it should. Some HW claims to be 0.95 compliant, + * but it halts the control endpoint anyway. + */ + if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_HALTED) { + /* + * If EP_HALTED is set and TD is on the cancelled list + * the TD and dequeue pointer will be handled by reset + * ep command completion + */ + if ((ep->ep_state & EP_HALTED) && + !list_empty(&td->cancelled_td_list)) { + xhci_dbg(xhci, "Already resolving halted ep for 0x%llx\n", + (unsigned long long)xhci_trb_virt_to_dma( + td->start_seg, td->first_trb)); + return 0; + } + /* endpoint not halted, don't reset it */ + break; + } + /* Almost same procedure as for STALL_ERROR below */ + xhci_clear_hub_tt_buffer(xhci, td, ep); + xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td, + EP_HARD_RESET); + return 0; + case COMP_STALL_ERROR: /* * xhci internal endpoint state will go to a "halt" state for * any stall, including default control pipe protocol stall. @@ -2157,21 +2191,23 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, * stall later. Hub TT buffer should only be cleared for FS/LS * devices behind HS hubs for functional stalls. */ - if ((ep->ep_index != 0) || (trb_comp_code != COMP_STALL_ERROR)) + if (ep->ep_index != 0) xhci_clear_hub_tt_buffer(xhci, td, ep); xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td, EP_HARD_RESET); return 0; /* xhci_handle_halted_endpoint marked td cancelled */ - } else { - /* Update ring dequeue pointer */ - ep_ring->dequeue = td->last_trb; - ep_ring->deq_seg = td->last_trb_seg; - ep_ring->num_trbs_free += td->num_trbs - 1; - inc_deq(xhci, ep_ring); + default: + break; } + /* Update ring dequeue pointer */ + ep_ring->dequeue = td->last_trb; + ep_ring->deq_seg = td->last_trb_seg; + ep_ring->num_trbs_free += td->num_trbs - 1; + inc_deq(xhci, ep_ring); + return xhci_td_cleanup(xhci, td, ep_ring, td->status); } |