diff options
Diffstat (limited to 'drivers')
30 files changed, 756 insertions, 299 deletions
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index 768d33f9ebc8..a82f845cc4b5 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -69,6 +69,7 @@ struct j721e_pcie_data { enum j721e_pcie_mode mode; unsigned int quirk_retrain_flag:1; unsigned int quirk_detect_quiet_flag:1; + unsigned int quirk_disable_flr:1; u32 linkdown_irq_regfield; unsigned int byte_access_allowed:1; }; @@ -307,6 +308,7 @@ static const struct j721e_pcie_data j7200_pcie_rc_data = { static const struct j721e_pcie_data j7200_pcie_ep_data = { .mode = PCI_MODE_EP, .quirk_detect_quiet_flag = true, + .quirk_disable_flr = true, }; static const struct j721e_pcie_data am64_pcie_rc_data = { @@ -405,6 +407,7 @@ static int j721e_pcie_probe(struct platform_device *pdev) return -ENOMEM; ep->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag; + ep->quirk_disable_flr = data->quirk_disable_flr; cdns_pcie = &ep->pcie; cdns_pcie->dev = dev; diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c index 88e05b9c2e5b..b8b655d4047e 100644 --- a/drivers/pci/controller/cadence/pcie-cadence-ep.c +++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c @@ -187,8 +187,7 @@ static int cdns_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, u8 vfn, struct cdns_pcie *pcie = &ep->pcie; u32 r; - r = find_first_zero_bit(&ep->ob_region_map, - sizeof(ep->ob_region_map) * BITS_PER_LONG); + r = find_first_zero_bit(&ep->ob_region_map, BITS_PER_LONG); if (r >= ep->max_regions - 1) { dev_err(&epc->dev, "no free outbound region\n"); return -EINVAL; @@ -565,7 +564,8 @@ static int cdns_pcie_ep_start(struct pci_epc *epc) struct cdns_pcie_ep *ep = epc_get_drvdata(epc); struct cdns_pcie *pcie = &ep->pcie; struct device *dev = pcie->dev; - int ret; + int max_epfs = sizeof(epc->function_num_map) * 8; + int ret, value, epf; /* * BIT(0) is hardwired to 1, hence function 0 is always enabled @@ -573,6 +573,21 @@ static int cdns_pcie_ep_start(struct pci_epc *epc) */ cdns_pcie_writel(pcie, CDNS_PCIE_LM_EP_FUNC_CFG, epc->function_num_map); + if (ep->quirk_disable_flr) { + for (epf = 0; epf < max_epfs; epf++) { + if (!(epc->function_num_map & BIT(epf))) + continue; + + value = cdns_pcie_ep_fn_readl(pcie, epf, + CDNS_PCIE_EP_FUNC_DEV_CAP_OFFSET + + PCI_EXP_DEVCAP); + value &= ~PCI_EXP_DEVCAP_FLR; + cdns_pcie_ep_fn_writel(pcie, epf, + CDNS_PCIE_EP_FUNC_DEV_CAP_OFFSET + + PCI_EXP_DEVCAP, value); + } + } + ret = cdns_pcie_start_link(pcie); if (ret) { dev_err(dev, "Failed to start link\n"); diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c index fb96d37a135c..940c7dd701d6 100644 --- a/drivers/pci/controller/cadence/pcie-cadence-host.c +++ b/drivers/pci/controller/cadence/pcie-cadence-host.c @@ -123,6 +123,14 @@ static int cdns_pcie_retrain(struct cdns_pcie *pcie) return ret; } +static void cdns_pcie_host_enable_ptm_response(struct cdns_pcie *pcie) +{ + u32 val; + + val = cdns_pcie_readl(pcie, CDNS_PCIE_LM_PTM_CTRL); + cdns_pcie_writel(pcie, CDNS_PCIE_LM_PTM_CTRL, val | CDNS_PCIE_LM_TPM_CTRL_PTMRSEN); +} + static int cdns_pcie_host_start_link(struct cdns_pcie_rc *rc) { struct cdns_pcie *pcie = &rc->pcie; @@ -501,6 +509,8 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc) if (rc->quirk_detect_quiet_flag) cdns_pcie_detect_quiet_min_delay_set(&rc->pcie); + cdns_pcie_host_enable_ptm_response(pcie); + ret = cdns_pcie_start_link(pcie); if (ret) { dev_err(dev, "Failed to start link\n"); diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h index c8a27b6290ce..190786e47df9 100644 --- a/drivers/pci/controller/cadence/pcie-cadence.h +++ b/drivers/pci/controller/cadence/pcie-cadence.h @@ -116,6 +116,10 @@ #define LM_RC_BAR_CFG_APERTURE(bar, aperture) \ (((aperture) - 2) << ((bar) * 8)) +/* PTM Control Register */ +#define CDNS_PCIE_LM_PTM_CTRL (CDNS_PCIE_LM_BASE + 0x0da8) +#define CDNS_PCIE_LM_TPM_CTRL_PTMRSEN BIT(17) + /* * Endpoint Function Registers (PCI configuration space for endpoint functions) */ @@ -123,6 +127,7 @@ #define CDNS_PCIE_EP_FUNC_MSI_CAP_OFFSET 0x90 #define CDNS_PCIE_EP_FUNC_MSIX_CAP_OFFSET 0xb0 +#define CDNS_PCIE_EP_FUNC_DEV_CAP_OFFSET 0xc0 #define CDNS_PCIE_EP_FUNC_SRIOV_CAP_OFFSET 0x200 /* @@ -357,6 +362,7 @@ struct cdns_pcie_epf { * minimize time between read and write * @epf: Structure to hold info about endpoint function * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk + * @quirk_disable_flr: Disable FLR (Function Level Reset) quirk flag */ struct cdns_pcie_ep { struct cdns_pcie pcie; @@ -372,6 +378,7 @@ struct cdns_pcie_ep { spinlock_t lock; struct cdns_pcie_epf *epf; unsigned int quirk_detect_quiet_flag:1; + unsigned int quirk_disable_flr:1; }; diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 6619e3caffe2..7a285fb0f619 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -408,6 +408,11 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) dev_err(dev, "failed to disable vpcie regulator: %d\n", ret); } + + /* Some boards don't have PCIe reset GPIO. */ + if (gpio_is_valid(imx6_pcie->reset_gpio)) + gpio_set_value_cansleep(imx6_pcie->reset_gpio, + imx6_pcie->gpio_active_high); } static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie) @@ -540,15 +545,6 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) /* allow the clocks to stabilize */ usleep_range(200, 500); - /* Some boards don't have PCIe reset GPIO. */ - if (gpio_is_valid(imx6_pcie->reset_gpio)) { - gpio_set_value_cansleep(imx6_pcie->reset_gpio, - imx6_pcie->gpio_active_high); - msleep(100); - gpio_set_value_cansleep(imx6_pcie->reset_gpio, - !imx6_pcie->gpio_active_high); - } - switch (imx6_pcie->drvdata->variant) { case IMX8MQ: reset_control_deassert(imx6_pcie->pciephy_reset); @@ -595,6 +591,15 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) break; } + /* Some boards don't have PCIe reset GPIO. */ + if (gpio_is_valid(imx6_pcie->reset_gpio)) { + msleep(100); + gpio_set_value_cansleep(imx6_pcie->reset_gpio, + !imx6_pcie->gpio_active_high); + /* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */ + msleep(100); + } + return; err_ref_clk: diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 2fa86f32d964..9979302532b7 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -396,7 +396,8 @@ int dw_pcie_host_init(struct pcie_port *pp) sizeof(pp->msi_msg), DMA_FROM_DEVICE, DMA_ATTR_SKIP_CPU_SYNC); - if (dma_mapping_error(pci->dev, pp->msi_data)) { + ret = dma_mapping_error(pci->dev, pp->msi_data); + if (ret) { dev_err(pci->dev, "Failed to map MSI data\n"); pp->msi_data = 0; goto err_free_msi; diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c index c9b341e55cbb..8c5bb9d7cc36 100644 --- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c +++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c @@ -10,9 +10,12 @@ #include <linux/clk.h> #include <linux/gpio/consumer.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/irqdomain.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/of_irq.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/regmap.h> @@ -26,6 +29,7 @@ */ #define HIWORD_UPDATE(mask, val) (((mask) << 16) | (val)) #define HIWORD_UPDATE_BIT(val) HIWORD_UPDATE(val, val) +#define HIWORD_DISABLE_BIT(val) HIWORD_UPDATE(val, ~val) #define to_rockchip_pcie(x) dev_get_drvdata((x)->dev) @@ -36,10 +40,12 @@ #define PCIE_LINKUP (PCIE_SMLH_LINKUP | PCIE_RDLH_LINKUP) #define PCIE_L0S_ENTRY 0x11 #define PCIE_CLIENT_GENERAL_CONTROL 0x0 +#define PCIE_CLIENT_INTR_STATUS_LEGACY 0x8 +#define PCIE_CLIENT_INTR_MASK_LEGACY 0x1c #define PCIE_CLIENT_GENERAL_DEBUG 0x104 -#define PCIE_CLIENT_HOT_RESET_CTRL 0x180 +#define PCIE_CLIENT_HOT_RESET_CTRL 0x180 #define PCIE_CLIENT_LTSSM_STATUS 0x300 -#define PCIE_LTSSM_ENABLE_ENHANCE BIT(4) +#define PCIE_LTSSM_ENABLE_ENHANCE BIT(4) #define PCIE_LTSSM_STATUS_MASK GENMASK(5, 0) struct rockchip_pcie { @@ -51,6 +57,7 @@ struct rockchip_pcie { struct reset_control *rst; struct gpio_desc *rst_gpio; struct regulator *vpcie3v3; + struct irq_domain *irq_domain; }; static int rockchip_pcie_readl_apb(struct rockchip_pcie *rockchip, @@ -65,6 +72,78 @@ static void rockchip_pcie_writel_apb(struct rockchip_pcie *rockchip, writel_relaxed(val, rockchip->apb_base + reg); } +static void rockchip_pcie_legacy_int_handler(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + struct rockchip_pcie *rockchip = irq_desc_get_handler_data(desc); + unsigned long reg, hwirq; + + chained_irq_enter(chip, desc); + + reg = rockchip_pcie_readl_apb(rockchip, PCIE_CLIENT_INTR_STATUS_LEGACY); + + for_each_set_bit(hwirq, ®, 4) + generic_handle_domain_irq(rockchip->irq_domain, hwirq); + + chained_irq_exit(chip, desc); +} + +static void rockchip_intx_mask(struct irq_data *data) +{ + rockchip_pcie_writel_apb(irq_data_get_irq_chip_data(data), + HIWORD_UPDATE_BIT(BIT(data->hwirq)), + PCIE_CLIENT_INTR_MASK_LEGACY); +}; + +static void rockchip_intx_unmask(struct irq_data *data) +{ + rockchip_pcie_writel_apb(irq_data_get_irq_chip_data(data), + HIWORD_DISABLE_BIT(BIT(data->hwirq)), + PCIE_CLIENT_INTR_MASK_LEGACY); +}; + +static struct irq_chip rockchip_intx_irq_chip = { + .name = "INTx", + .irq_mask = rockchip_intx_mask, + .irq_unmask = rockchip_intx_unmask, + .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND, +}; + +static int rockchip_pcie_intx_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &rockchip_intx_irq_chip, handle_level_irq); + irq_set_chip_data(irq, domain->host_data); + + return 0; +} + +static const struct irq_domain_ops intx_domain_ops = { + .map = rockchip_pcie_intx_map, +}; + +static int rockchip_pcie_init_irq_domain(struct rockchip_pcie *rockchip) +{ + struct device *dev = rockchip->pci.dev; + struct device_node *intc; + + intc = of_get_child_by_name(dev->of_node, "legacy-interrupt-controller"); + if (!intc) { + dev_err(dev, "missing child interrupt-controller node\n"); + return -EINVAL; + } + + rockchip->irq_domain = irq_domain_add_linear(intc, PCI_NUM_INTX, + &intx_domain_ops, rockchip); + of_node_put(intc); + if (!rockchip->irq_domain) { + dev_err(dev, "failed to get a INTx IRQ domain\n"); + return -EINVAL; + } + + return 0; +} + static void rockchip_pcie_enable_ltssm(struct rockchip_pcie *rockchip) { rockchip_pcie_writel_apb(rockchip, PCIE_CLIENT_ENABLE_LTSSM, @@ -111,7 +190,20 @@ static int rockchip_pcie_host_init(struct pcie_port *pp) { struct dw_pcie *pci = to_dw_pcie_from_pp(pp); struct rockchip_pcie *rockchip = to_rockchip_pcie(pci); + struct device *dev = rockchip->pci.dev; u32 val = HIWORD_UPDATE_BIT(PCIE_LTSSM_ENABLE_ENHANCE); + int irq, ret; + + irq = of_irq_get_byname(dev->of_node, "legacy"); + if (irq < 0) + return irq; + + ret = rockchip_pcie_init_irq_domain(rockchip); + if (ret < 0) + dev_err(dev, "failed to init irq domain\n"); + + irq_set_chained_handler_and_data(irq, rockchip_pcie_legacy_int_handler, + rockchip); /* LTSSM enable control mode */ rockchip_pcie_writel_apb(rockchip, val, PCIE_CLIENT_HOT_RESET_CTRL); @@ -152,6 +244,11 @@ static int rockchip_pcie_resource_get(struct platform_device *pdev, if (IS_ERR(rockchip->rst_gpio)) return PTR_ERR(rockchip->rst_gpio); + rockchip->rst = devm_reset_control_array_get_exclusive(&pdev->dev); + if (IS_ERR(rockchip->rst)) + return dev_err_probe(&pdev->dev, PTR_ERR(rockchip->rst), + "failed to get reset lines\n"); + return 0; } @@ -182,18 +279,6 @@ static void rockchip_pcie_phy_deinit(struct rockchip_pcie *rockchip) phy_power_off(rockchip->phy); } -static int rockchip_pcie_reset_control_release(struct rockchip_pcie *rockchip) -{ - struct device *dev = rockchip->pci.dev; - - rockchip->rst = devm_reset_control_array_get_exclusive(dev); - if (IS_ERR(rockchip->rst)) - return dev_err_probe(dev, PTR_ERR(rockchip->rst), - "failed to get reset lines\n"); - - return reset_control_deassert(rockchip->rst); -} - static const struct dw_pcie_ops dw_pcie_ops = { .link_up = rockchip_pcie_link_up, .start_link = rockchip_pcie_start_link, @@ -222,6 +307,10 @@ static int rockchip_pcie_probe(struct platform_device *pdev) if (ret) return ret; + ret = reset_control_assert(rockchip->rst); + if (ret) + return ret; + /* DON'T MOVE ME: must be enable before PHY init */ rockchip->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3"); if (IS_ERR(rockchip->vpcie3v3)) { @@ -241,7 +330,7 @@ static int rockchip_pcie_probe(struct platform_device *pdev) if (ret) goto disable_regulator; - ret = rockchip_pcie_reset_control_release(rockchip); + ret = reset_control_deassert(rockchip->rst); if (ret) goto deinit_phy; diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c index 6ce8eddf3a37..ec99116ad05c 100644 --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c @@ -223,11 +223,8 @@ static void qcom_pcie_dw_stop_link(struct dw_pcie *pci) disable_irq(pcie_ep->perst_irq); } -static int qcom_pcie_perst_deassert(struct dw_pcie *pci) +static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep) { - struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci); - struct device *dev = pci->dev; - u32 val, offset; int ret; ret = clk_bulk_prepare_enable(ARRAY_SIZE(qcom_pcie_ep_clks), @@ -247,6 +244,38 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci) if (ret) goto err_phy_exit; + return 0; + +err_phy_exit: + phy_exit(pcie_ep->phy); +err_disable_clk: + clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), + qcom_pcie_ep_clks); + + return ret; +} + +static void qcom_pcie_disable_resources(struct qcom_pcie_ep *pcie_ep) +{ + phy_power_off(pcie_ep->phy); + phy_exit(pcie_ep->phy); + clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), + qcom_pcie_ep_clks); +} + +static int qcom_pcie_perst_deassert(struct dw_pcie *pci) +{ + struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci); + struct device *dev = pci->dev; + u32 val, offset; + int ret; + + ret = qcom_pcie_enable_resources(pcie_ep); + if (ret) { + dev_err(dev, "Failed to enable resources: %d\n", ret); + return ret; + } + /* Assert WAKE# to RC to indicate device is ready */ gpiod_set_value_cansleep(pcie_ep->wake, 1); usleep_range(WAKE_DELAY_US, WAKE_DELAY_US + 500); @@ -335,7 +364,7 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci) ret = dw_pcie_ep_init_complete(&pcie_ep->pci.ep); if (ret) { dev_err(dev, "Failed to complete initialization: %d\n", ret); - goto err_phy_power_off; + goto err_disable_resources; } /* @@ -355,13 +384,8 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci) return 0; -err_phy_power_off: - phy_power_off(pcie_ep->phy); -err_phy_exit: - phy_exit(pcie_ep->phy); -err_disable_clk: - clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), - qcom_pcie_ep_clks); +err_disable_resources: + qcom_pcie_disable_resources(pcie_ep); return ret; } @@ -376,10 +400,7 @@ static void qcom_pcie_perst_assert(struct dw_pcie *pci) return; } - phy_power_off(pcie_ep->phy); - phy_exit(pcie_ep->phy); - clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), - qcom_pcie_ep_clks); + qcom_pcie_disable_resources(pcie_ep); pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED; } @@ -643,43 +664,26 @@ static int qcom_pcie_ep_probe(struct platform_device *pdev) if (ret) return ret; - ret = clk_bulk_prepare_enable(ARRAY_SIZE(qcom_pcie_ep_clks), - qcom_pcie_ep_clks); - if (ret) + ret = qcom_pcie_enable_resources(pcie_ep); + if (ret) { + dev_err(dev, "Failed to enable resources: %d\n", ret); return ret; - - ret = qcom_pcie_ep_core_reset(pcie_ep); - if (ret) - goto err_disable_clk; - - ret = phy_init(pcie_ep->phy); - if (ret) - goto err_disable_clk; - - /* PHY needs to be powered on for dw_pcie_ep_init() */ - ret = phy_power_on(pcie_ep->phy); - if (ret) - goto err_phy_exit; + } ret = dw_pcie_ep_init(&pcie_ep->pci.ep); if (ret) { dev_err(dev, "Failed to initialize endpoint: %d\n", ret); - goto err_phy_power_off; + goto err_disable_resources; } ret = qcom_pcie_ep_enable_irq_resources(pdev, pcie_ep); if (ret) - goto err_phy_power_off; + goto err_disable_resources; return 0; -err_phy_power_off: - phy_power_off(pcie_ep->phy); -err_phy_exit: - phy_exit(pcie_ep->phy); -err_disable_clk: - clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), - qcom_pcie_ep_clks); +err_disable_resources: + qcom_pcie_disable_resources(pcie_ep); return ret; } @@ -691,10 +695,7 @@ static int qcom_pcie_ep_remove(struct platform_device *pdev) if (pcie_ep->link_status == QCOM_PCIE_EP_LINK_DISABLED) return 0; - phy_power_off(pcie_ep->phy); - phy_exit(pcie_ep->phy); - clk_bulk_disable_unprepare(ARRAY_SIZE(qcom_pcie_ep_clks), - qcom_pcie_ep_clks); + qcom_pcie_disable_resources(pcie_ep); return 0; } diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 816028c0f6ed..2ea13750b492 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1238,12 +1238,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) goto err_disable_clocks; } - ret = clk_prepare_enable(res->pipe_clk); - if (ret) { - dev_err(dev, "cannot prepare/enable pipe clock\n"); - goto err_disable_clocks; - } - /* Wait for reset to complete, required on SM8450 */ usleep_range(1000, 1500); @@ -1523,6 +1517,13 @@ static const struct qcom_pcie_cfg sdm845_cfg = { .has_tbu_clk = true, }; +static const struct qcom_pcie_cfg sm8150_cfg = { + /* sm8150 has qcom IP rev 1.5.0. However 1.5.0 ops are same as + * 1.9.0, so reuse the same. + */ + .ops = &ops_1_9_0, +}; + static const struct qcom_pcie_cfg sm8250_cfg = { .ops = &ops_1_9_0, .has_tbu_clk = true, @@ -1627,22 +1628,21 @@ static int qcom_pcie_probe(struct platform_device *pdev) pp->ops = &qcom_pcie_dw_ops; ret = phy_init(pcie->phy); - if (ret) { - pm_runtime_disable(&pdev->dev); + if (ret) goto err_pm_runtime_put; - } platform_set_drvdata(pdev, pcie); ret = dw_pcie_host_init(pp); if (ret) { dev_err(dev, "cannot initialize host\n"); - pm_runtime_disable(&pdev->dev); - goto err_pm_runtime_put; + goto err_phy_exit; } return 0; +err_phy_exit: + phy_exit(pcie->phy); err_pm_runtime_put: pm_runtime_put(dev); pm_runtime_disable(dev); @@ -1660,6 +1660,7 @@ static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, + { .compatible = "qcom,pcie-sm8150", .data = &sm8150_cfg }, { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, { .compatible = "qcom,pcie-sc8180x", .data = &sc8180x_cfg }, { .compatible = "qcom,pcie-sm8450-pcie0", .data = &sm8450_pcie0_cfg }, diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c index b1b5f836a806..cc2678490162 100644 --- a/drivers/pci/controller/dwc/pcie-tegra194.c +++ b/drivers/pci/controller/dwc/pcie-tegra194.c @@ -186,8 +186,6 @@ #define N_FTS_VAL 52 #define FTS_VAL 52 -#define PORT_LOGIC_MSI_CTRL_INT_0_EN 0x828 - #define GEN3_EQ_CONTROL_OFF 0x8a8 #define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_SHIFT 8 #define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC_MASK GENMASK(23, 8) @@ -2189,9 +2187,6 @@ static int tegra194_pcie_suspend_noirq(struct device *dev) if (!pcie->link_state) return 0; - /* Save MSI interrupt vector */ - pcie->msi_ctrl_int = dw_pcie_readl_dbi(&pcie->pci, - PORT_LOGIC_MSI_CTRL_INT_0_EN); tegra_pcie_downstream_dev_to_D0(pcie); tegra194_pcie_pme_turnoff(pcie); tegra_pcie_unconfig_controller(pcie); @@ -2223,10 +2218,6 @@ static int tegra194_pcie_resume_noirq(struct device *dev) if (ret < 0) goto fail_host_init; - /* Restore MSI interrupt vector */ - dw_pcie_writel_dbi(&pcie->pci, PORT_LOGIC_MSI_CTRL_INT_0_EN, - pcie->msi_ctrl_int); - return 0; fail_host_init: diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c index 8f76d4bda356..c1ffdb06c971 100644 --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c @@ -8,6 +8,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/gpio.h> @@ -66,6 +67,12 @@ #define PCIE_STAT_BUS 0xff00 #define PCIE_STAT_DEV 0x1f0000 #define PCIE_STAT_LINK_DOWN BIT(0) +#define PCIE_SSPL_OFF 0x1a0c +#define PCIE_SSPL_VALUE_SHIFT 0 +#define PCIE_SSPL_VALUE_MASK GENMASK(7, 0) +#define PCIE_SSPL_SCALE_SHIFT 8 +#define PCIE_SSPL_SCALE_MASK GENMASK(9, 8) +#define PCIE_SSPL_ENABLE BIT(16) #define PCIE_RC_RTSTA 0x1a14 #define PCIE_DEBUG_CTRL 0x1a60 #define PCIE_DEBUG_SOFT_RESET BIT(20) @@ -111,6 +118,8 @@ struct mvebu_pcie_port { struct mvebu_pcie_window iowin; u32 saved_pcie_stat; struct resource regs; + u8 slot_power_limit_value; + u8 slot_power_limit_scale; struct irq_domain *intx_irq_domain; raw_spinlock_t irq_lock; int intx_irq; @@ -239,7 +248,7 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) { - u32 ctrl, lnkcap, cmd, dev_rev, unmask; + u32 ctrl, lnkcap, cmd, dev_rev, unmask, sspl; /* Setup PCIe controller to Root Complex mode. */ ctrl = mvebu_readl(port, PCIE_CTRL_OFF); @@ -292,6 +301,20 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) /* Point PCIe unit MBUS decode windows to DRAM space. */ mvebu_pcie_setup_wins(port); + /* + * Program Root Port to automatically send Set_Slot_Power_Limit + * PCIe Message when changing status from Dl_Down to Dl_Up and valid + * slot power limit was specified. + */ + sspl = mvebu_readl(port, PCIE_SSPL_OFF); + sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE); + if (port->slot_power_limit_value) { + sspl |= port->slot_power_limit_value << PCIE_SSPL_VALUE_SHIFT; + sspl |= port->slot_power_limit_scale << PCIE_SSPL_SCALE_SHIFT; + sspl |= PCIE_SSPL_ENABLE; + } + mvebu_writel(port, sspl, PCIE_SSPL_OFF); + /* Mask all interrupt sources. */ mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF); @@ -628,9 +651,24 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge, (PCI_EXP_LNKSTA_DLLLA << 16) : 0); break; - case PCI_EXP_SLTCTL: - *value = PCI_EXP_SLTSTA_PDS << 16; + case PCI_EXP_SLTCTL: { + u16 slotctl = le16_to_cpu(bridge->pcie_conf.slotctl); + u16 slotsta = le16_to_cpu(bridge->pcie_conf.slotsta); + u32 val = 0; + /* + * When slot power limit was not specified in DT then + * ASPL_DISABLE bit is stored only in emulated config space. + * Otherwise reflect status of PCIE_SSPL_ENABLE bit in HW. + */ + if (!port->slot_power_limit_value) + val |= slotctl & PCI_EXP_SLTCTL_ASPL_DISABLE; + else if (!(mvebu_readl(port, PCIE_SSPL_OFF) & PCIE_SSPL_ENABLE)) + val |= PCI_EXP_SLTCTL_ASPL_DISABLE; + /* This callback is 32-bit and in high bits is slot status. */ + val |= slotsta << 16; + *value = val; break; + } case PCI_EXP_RTSTA: *value = mvebu_readl(port, PCIE_RC_RTSTA); @@ -774,6 +812,22 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge, mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL); break; + case PCI_EXP_SLTCTL: + /* + * Allow to change PCIE_SSPL_ENABLE bit only when slot power + * limit was specified in DT and configured into HW. + */ + if ((mask & PCI_EXP_SLTCTL_ASPL_DISABLE) && + port->slot_power_limit_value) { + u32 sspl = mvebu_readl(port, PCIE_SSPL_OFF); + if (new & PCI_EXP_SLTCTL_ASPL_DISABLE) + sspl &= ~PCIE_SSPL_ENABLE; + else + sspl |= PCIE_SSPL_ENABLE; + mvebu_writel(port, sspl, PCIE_SSPL_OFF); + } + break; + case PCI_EXP_RTSTA: /* * PME Status bit in Root Status Register (PCIE_RC_RTSTA) @@ -868,8 +922,26 @@ static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port) /* * Older mvebu hardware provides PCIe Capability structure only in * version 1. New hardware provides it in version 2. + * Enable slot support which is emulated. */ - bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver); + bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver | PCI_EXP_FLAGS_SLOT); + + /* + * Set Presence Detect State bit permanently as there is no support for + * unplugging PCIe card from the slot. Assume that PCIe card is always + * connected in slot. + * + * Set physical slot number to port+1 as mvebu ports are indexed from + * zero and zero value is reserved for ports within the same silicon + * as Root Port which is not mvebu case. + * + * Also set correct slot power limit. + */ + bridge->pcie_conf.slotcap = cpu_to_le32( + FIELD_PREP(PCI_EXP_SLTCAP_SPLV, port->slot_power_limit_value) | + FIELD_PREP(PCI_EXP_SLTCAP_SPLS, port->slot_power_limit_scale) | + FIELD_PREP(PCI_EXP_SLTCAP_PSN, port->port+1)); + bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS); bridge->subsystem_vendor_id = ssdev_id & 0xffff; bridge->subsystem_id = ssdev_id >> 16; @@ -1191,6 +1263,7 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, { struct device *dev = &pcie->pdev->dev; enum of_gpio_flags flags; + u32 slot_power_limit; int reset_gpio, ret; u32 num_lanes; @@ -1291,6 +1364,15 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, port->reset_gpio = gpio_to_desc(reset_gpio); } + slot_power_limit = of_pci_get_slot_power_limit(child, + &port->slot_power_limit_value, + &port->slot_power_limit_scale); + if (slot_power_limit) + dev_info(dev, "%s: Slot power limit %u.%uW\n", + port->name, + slot_power_limit / 1000, + (slot_power_limit / 100) % 10); + port->clk = of_clk_get_by_name(child, NULL); if (IS_ERR(port->clk)) { dev_err(dev, "%s: cannot get clock\n", port->name); @@ -1588,7 +1670,7 @@ static int mvebu_pcie_remove(struct platform_device *pdev) { struct mvebu_pcie *pcie = platform_get_drvdata(pdev); struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); - u32 cmd; + u32 cmd, sspl; int i; /* Remove PCI bus with all devices. */ @@ -1625,6 +1707,11 @@ static int mvebu_pcie_remove(struct platform_device *pdev) /* Free config space for emulated root bridge. */ pci_bridge_emul_cleanup(&port->bridge); + /* Disable sending Set_Slot_Power_Limit PCIe Message. */ + sspl = mvebu_readl(port, PCIE_SSPL_OFF); + sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE); + mvebu_writel(port, sspl, PCIE_SSPL_OFF); + /* Disable and clear BARs and windows. */ mvebu_pcie_disable_wins(port); diff --git a/drivers/pci/controller/pci-versatile.c b/drivers/pci/controller/pci-versatile.c index 653d5d0ecf81..7991d334e0f1 100644 --- a/drivers/pci/controller/pci-versatile.c +++ b/drivers/pci/controller/pci-versatile.c @@ -31,10 +31,9 @@ static u32 pci_slot_ignore; static int __init versatile_pci_slot_ignore(char *str) { - int retval; int slot; - while ((retval = get_option(&str, &slot))) { + while (get_option(&str, &slot)) { if ((slot < 0) || (slot > 31)) pr_err("Illegal slot value: %d\n", slot); else diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c index 3e8d70bfabc6..5d9fd36b02d1 100644 --- a/drivers/pci/controller/pcie-mediatek-gen3.c +++ b/drivers/pci/controller/pcie-mediatek-gen3.c @@ -838,6 +838,14 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie) if (err) return err; + /* + * The controller may have been left out of reset by the bootloader + * so make sure that we get a clean start by asserting resets here. + */ + reset_control_assert(pcie->phy_reset); + reset_control_assert(pcie->mac_reset); + usleep_range(10, 20); + /* Don't touch the hardware registers before power up */ err = mtk_pcie_power_up(pcie); if (err) diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c index ddfbd4aebdec..be8bd919cb88 100644 --- a/drivers/pci/controller/pcie-mediatek.c +++ b/drivers/pci/controller/pcie-mediatek.c @@ -1008,6 +1008,7 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie) "mediatek,generic-pciecfg"); if (cfg_node) { pcie->cfg = syscon_node_to_regmap(cfg_node); + of_node_put(cfg_node); if (IS_ERR(pcie->cfg)) return PTR_ERR(pcie->cfg); } diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c index 29d8e81e4181..dd5dba419047 100644 --- a/drivers/pci/controller/pcie-microchip-host.c +++ b/drivers/pci/controller/pcie-microchip-host.c @@ -406,6 +406,7 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *base) static void mc_handle_msi(struct irq_desc *desc) { struct mc_pcie *port = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); struct device *dev = port->dev; struct mc_msi *msi = &port->msi; void __iomem *bridge_base_addr = @@ -414,8 +415,11 @@ static void mc_handle_msi(struct irq_desc *desc) u32 bit; int ret; + chained_irq_enter(chip, desc); + status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL); if (status & PM_MSI_INT_MSI_MASK) { + writel_relaxed(status & PM_MSI_INT_MSI_MASK, bridge_base_addr + ISTATUS_LOCAL); status = readl_relaxed(bridge_base_addr + ISTATUS_MSI); for_each_set_bit(bit, &status, msi->num_vectors) { ret = generic_handle_domain_irq(msi->dev_domain, bit); @@ -424,6 +428,8 @@ static void mc_handle_msi(struct irq_desc *desc) bit); } } + + chained_irq_exit(chip, desc); } static void mc_msi_bottom_irq_ack(struct irq_data *data) @@ -432,13 +438,8 @@ static void mc_msi_bottom_irq_ack(struct irq_data *data) void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR; u32 bitpos = data->hwirq; - unsigned long status; writel_relaxed(BIT(bitpos), bridge_base_addr + ISTATUS_MSI); - status = readl_relaxed(bridge_base_addr + ISTATUS_MSI); - if (!status) - writel_relaxed(BIT(PM_MSI_INT_MSI_SHIFT), - bridge_base_addr + ISTATUS_LOCAL); } static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) @@ -563,6 +564,7 @@ static int mc_allocate_msi_domains(struct mc_pcie *port) static void mc_handle_intx(struct irq_desc *desc) { struct mc_pcie *port = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); struct device *dev = port->dev; void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR; @@ -570,6 +572,8 @@ static void mc_handle_intx(struct irq_desc *desc) u32 bit; int ret; + chained_irq_enter(chip, desc); + status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL); if (status & PM_MSI_INT_INTX_MASK) { status &= PM_MSI_INT_INTX_MASK; @@ -581,6 +585,8 @@ static void mc_handle_intx(struct irq_desc *desc) bit); } } + + chained_irq_exit(chip, desc); } static void mc_ack_intx_irq(struct irq_data *data) @@ -1115,7 +1121,7 @@ static const struct of_device_id mc_pcie_of_match[] = { {}, }; -MODULE_DEVICE_TABLE(of, mc_pcie_of_match) +MODULE_DEVICE_TABLE(of, mc_pcie_of_match); static struct platform_driver mc_pcie_driver = { .probe = pci_host_common_probe, diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c index 5fb9ce6e536e..d1a200b93b2b 100644 --- a/drivers/pci/controller/pcie-rockchip-ep.c +++ b/drivers/pci/controller/pcie-rockchip-ep.c @@ -264,8 +264,7 @@ static int rockchip_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, u8 vfn, struct rockchip_pcie *pcie = &ep->rockchip; u32 r; - r = find_first_zero_bit(&ep->ob_region_map, - sizeof(ep->ob_region_map) * BITS_PER_LONG); + r = find_first_zero_bit(&ep->ob_region_map, BITS_PER_LONG); /* * Region 0 is reserved for configuration space and shouldn't * be used elsewhere per TRM, so leave it out. diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c index eb05cceab964..94a14a3d7e55 100644 --- a/drivers/pci/controller/vmd.c +++ b/drivers/pci/controller/vmd.c @@ -6,7 +6,6 @@ #include <linux/device.h> #include <linux/interrupt.h> -#include <linux/iommu.h> #include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> @@ -813,8 +812,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) * acceptable because the guest is usually CPU-limited and MSI * remapping doesn't become a performance bottleneck. */ - if (iommu_capable(vmd->dev->dev.bus, IOMMU_CAP_INTR_REMAP) || - !(features & VMD_FEAT_CAN_BYPASS_MSI_REMAP) || + if (!(features & VMD_FEAT_CAN_BYPASS_MSI_REMAP) || offset[0] || offset[1]) { ret = vmd_alloc_irqs(vmd); if (ret) @@ -853,6 +851,9 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features) vmd_attach_resources(vmd); if (vmd->irq_domain) dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain); + else + dev_set_msi_domain(&vmd->bus->dev, + dev_get_msi_domain(&vmd->dev->dev)); vmd_acpi_begin(); diff --git a/drivers/pci/hotplug/pnv_php.c b/drivers/pci/hotplug/pnv_php.c index f4c2e6e01be0..881d420637bf 100644 --- a/drivers/pci/hotplug/pnv_php.c +++ b/drivers/pci/hotplug/pnv_php.c @@ -9,6 +9,7 @@ #include <linux/module.h> #include <linux/pci.h> #include <linux/pci_hotplug.h> +#include <linux/of_fdt.h> #include <asm/opal.h> #include <asm/pnv-pci.h> diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index e6991ff67526..980bb3afd092 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/pci.h> #include <linux/string.h> #include <linux/vmalloc.h> diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 9887c9de08c3..491986197c47 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/moduleparam.h> +#include <linux/of.h> #include <linux/pci.h> #include <linux/pci_hotplug.h> #include <linux/smp.h> @@ -20,6 +21,7 @@ #include <asm/eeh.h> /* for eeh_add_device() */ #include <asm/rtas.h> /* rtas_call */ #include <asm/pci-bridge.h> /* for pci_controller */ +#include <asm/prom.h> #include "../pci.h" /* for pci_add_new_bus */ /* and pci_do_scan_bus */ #include "rpaphp.h" diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c index c380bdacd146..630f77057c23 100644 --- a/drivers/pci/hotplug/rpaphp_pci.c +++ b/drivers/pci/hotplug/rpaphp_pci.c @@ -8,6 +8,7 @@ * Send feedback to <lxie@us.ibm.com> * */ +#include <linux/of.h> #include <linux/pci.h> #include <linux/string.h> diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c index 93b4a945c55d..779eab12e981 100644 --- a/drivers/pci/hotplug/rpaphp_slot.c +++ b/drivers/pci/hotplug/rpaphp_slot.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/sysfs.h> +#include <linux/of.h> #include <linux/pci.h> #include <linux/string.h> #include <linux/slab.h> diff --git a/drivers/pci/of.c b/drivers/pci/of.c index cb2e8351c2cc..6c1b81304665 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -633,3 +633,73 @@ int of_pci_get_max_link_speed(struct device_node *node) return max_link_speed; } EXPORT_SYMBOL_GPL(of_pci_get_max_link_speed); + +/** + * of_pci_get_slot_power_limit - Parses the "slot-power-limit-milliwatt" + * property. + * + * @node: device tree node with the slot power limit information + * @slot_power_limit_value: pointer where the value should be stored in PCIe + * Slot Capabilities Register format + * @slot_power_limit_scale: pointer where the scale should be stored in PCIe + * Slot Capabilities Register format + * + * Returns the slot power limit in milliwatts and if @slot_power_limit_value + * and @slot_power_limit_scale pointers are non-NULL, fills in the value and + * scale in format used by PCIe Slot Capabilities Register. + * + * If the property is not found or is invalid, returns 0. + */ +u32 of_pci_get_slot_power_limit(struct device_node *node, + u8 *slot_power_limit_value, + u8 *slot_power_limit_scale) +{ + u32 slot_power_limit_mw; + u8 value, scale; + + if (of_property_read_u32(node, "slot-power-limit-milliwatt", + &slot_power_limit_mw)) + slot_power_limit_mw = 0; + + /* Calculate Slot Power Limit Value and Slot Power Limit Scale */ + if (slot_power_limit_mw == 0) { + value = 0x00; + scale = 0; + } else if (slot_power_limit_mw <= 255) { + value = slot_power_limit_mw; + scale = 3; + } else if (slot_power_limit_mw <= 255*10) { + value = slot_power_limit_mw / 10; + scale = 2; + slot_power_limit_mw = slot_power_limit_mw / 10 * 10; + } else if (slot_power_limit_mw <= 255*100) { + value = slot_power_limit_mw / 100; + scale = 1; + slot_power_limit_mw = slot_power_limit_mw / 100 * 100; + } else if (slot_power_limit_mw <= 239*1000) { + value = slot_power_limit_mw / 1000; + scale = 0; + slot_power_limit_mw = slot_power_limit_mw / 1000 * 1000; + } else if (slot_power_limit_mw < 250*1000) { + value = 0xEF; + scale = 0; + slot_power_limit_mw = 239*1000; + } else if (slot_power_limit_mw <= 600*1000) { + value = 0xF0 + (slot_power_limit_mw / 1000 - 250) / 25; + scale = 0; + slot_power_limit_mw = slot_power_limit_mw / (1000*25) * (1000*25); + } else { + value = 0xFE; + scale = 0; + slot_power_limit_mw = 600*1000; + } + + if (slot_power_limit_value) + *slot_power_limit_value = value; + + if (slot_power_limit_scale) + *slot_power_limit_scale = scale; + + return slot_power_limit_mw; +} +EXPORT_SYMBOL_GPL(of_pci_get_slot_power_limit); diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c index 30b1df3c9d2f..462b429ad243 100644 --- a/drivers/pci/p2pdma.c +++ b/drivers/pci/p2pdma.c @@ -326,15 +326,16 @@ static const struct pci_p2pdma_whitelist_entry { }; /* - * This lookup function tries to find the PCI device corresponding to a given - * host bridge. + * If the first device on host's root bus is either devfn 00.0 or a PCIe + * Root Port, return it. Otherwise return NULL. * - * It assumes the host bridge device is the first PCI device in the - * bus->devices list and that the devfn is 00.0. These assumptions should hold - * for all the devices in the whitelist above. + * We often use a devfn 00.0 "host bridge" in the pci_p2pdma_whitelist[] + * (though there is no PCI/PCIe requirement for such a device). On some + * platforms, e.g., Intel Skylake, there is no such host bridge device, and + * pci_p2pdma_whitelist[] may contain a Root Port at any devfn. * - * This function is equivalent to pci_get_slot(host->bus, 0), however it does - * not take the pci_bus_sem lock seeing __host_bridge_whitelist() must not + * This function is similar to pci_get_slot(host->bus, 0), but it does + * not take the pci_bus_sem lock since __host_bridge_whitelist() must not * sleep. * * For this to be safe, the caller should hold a reference to a device on the @@ -350,10 +351,14 @@ static struct pci_dev *pci_host_bridge_dev(struct pci_host_bridge *host) if (!root) return NULL; - if (root->devfn != PCI_DEVFN(0, 0)) - return NULL; - return root; + if (root->devfn == PCI_DEVFN(0, 0)) + return root; + + if (pci_pcie_type(root) == PCI_EXP_TYPE_ROOT_PORT) + return root; + + return NULL; } static bool __host_bridge_whitelist(struct pci_host_bridge *host, diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 3787876ecb24..3760d85c10d2 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -974,9 +974,11 @@ bool acpi_pci_power_manageable(struct pci_dev *dev) bool acpi_pci_bridge_d3(struct pci_dev *dev) { - const union acpi_object *obj; - struct acpi_device *adev; struct pci_dev *rpdev; + struct acpi_device *adev; + acpi_status status; + unsigned long long state; + const union acpi_object *obj; if (acpi_pci_disabled || !dev->is_hotplug_bridge) return false; @@ -985,12 +987,6 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev) if (acpi_pci_power_manageable(dev)) return true; - /* - * The ACPI firmware will provide the device-specific properties through - * _DSD configuration object. Look for the 'HotPlugSupportInD3' property - * for the root port and if it is set we know the hierarchy behind it - * supports D3 just fine. - */ rpdev = pcie_find_root_port(dev); if (!rpdev) return false; @@ -999,11 +995,34 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev) if (!adev) return false; - if (acpi_dev_get_property(adev, "HotPlugSupportInD3", - ACPI_TYPE_INTEGER, &obj) < 0) + /* + * If the Root Port cannot signal wakeup signals at all, i.e., it + * doesn't supply a wakeup GPE via _PRW, it cannot signal hotplug + * events from low-power states including D3hot and D3cold. + */ + if (!adev->wakeup.flags.valid) return false; - return obj->integer.value == 1; + /* + * If the Root Port cannot wake itself from D3hot or D3cold, we + * can't use D3. + */ + status = acpi_evaluate_integer(adev->handle, "_S0W", NULL, &state); + if (ACPI_SUCCESS(status) && state < ACPI_STATE_D3_HOT) + return false; + + /* + * The "HotPlugSupportInD3" property in a Root Port _DSD indicates + * the Port can signal hotplug events while in D3. We assume any + * bridges *below* that Root Port can also signal hotplug events + * while in D3. + */ + if (!acpi_dev_get_property(adev, "HotPlugSupportInD3", + ACPI_TYPE_INTEGER, &obj) && + obj->integer.value == 1) + return true; + + return false; } int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 4ceeb75fc899..2f3b69adfc9e 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -522,9 +522,9 @@ static void pci_device_shutdown(struct device *dev) pci_clear_master(pci_dev); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP -/* Auxiliary functions used for system resume and run-time resume. */ +/* Auxiliary functions used for system resume */ /** * pci_restore_standard_config - restore standard config registers of PCI device @@ -544,6 +544,11 @@ static int pci_restore_standard_config(struct pci_dev *pci_dev) pci_pme_restore(pci_dev); return 0; } +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM + +/* Auxiliary functions used for system resume and run-time resume */ static void pci_pm_default_resume(struct pci_dev *pci_dev) { @@ -551,18 +556,34 @@ static void pci_pm_default_resume(struct pci_dev *pci_dev) pci_enable_wake(pci_dev, PCI_D0, false); } -#endif - -#ifdef CONFIG_PM_SLEEP - -static void pci_pm_default_resume_early(struct pci_dev *pci_dev) +static void pci_pm_power_up_and_verify_state(struct pci_dev *pci_dev) { pci_power_up(pci_dev); pci_update_current_state(pci_dev, PCI_D0); +} + +static void pci_pm_default_resume_early(struct pci_dev *pci_dev) +{ + pci_pm_power_up_and_verify_state(pci_dev); pci_restore_state(pci_dev); pci_pme_restore(pci_dev); } +static void pci_pm_bridge_power_up_actions(struct pci_dev *pci_dev) +{ + pci_bridge_wait_for_secondary_bus(pci_dev); + /* + * When powering on a bridge from D3cold, the whole hierarchy may be + * powered on into D0uninitialized state, resume them to give them a + * chance to suspend again + */ + pci_resume_bus(pci_dev->subordinate); +} + +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_SLEEP + /* * Default "suspend" method for devices that have no driver provided suspend, * or not even a driver at all (second part). @@ -934,7 +955,7 @@ static int pci_pm_resume_noirq(struct device *dev) pcie_pme_root_status_cleanup(pci_dev); if (!skip_bus_pm && prev_state == PCI_D3cold) - pci_bridge_wait_for_secondary_bus(pci_dev); + pci_pm_bridge_power_up_actions(pci_dev); if (pci_has_legacy_pm_support(pci_dev)) return 0; @@ -1068,7 +1089,7 @@ static int pci_pm_thaw_noirq(struct device *dev) * in case the driver's "freeze" callbacks put it into a low-power * state. */ - pci_set_power_state(pci_dev, PCI_D0); + pci_pm_power_up_and_verify_state(pci_dev); pci_restore_state(pci_dev); if (pci_has_legacy_pm_support(pci_dev)) @@ -1312,7 +1333,7 @@ static int pci_pm_runtime_resume(struct device *dev) * to a driver because although we left it in D0, it may have gone to * D3cold when the bridge above it runtime suspended. */ - pci_restore_standard_config(pci_dev); + pci_pm_default_resume_early(pci_dev); if (!pci_dev->driver) return 0; @@ -1321,13 +1342,11 @@ static int pci_pm_runtime_resume(struct device *dev) pci_pm_default_resume(pci_dev); if (prev_state == PCI_D3cold) - pci_bridge_wait_for_secondary_bus(pci_dev); + pci_pm_bridge_power_up_actions(pci_dev); if (pm && pm->runtime_resume) error = pm->runtime_resume(dev); - pci_dev->runtime_d3cold = false; - return error; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index d25122fbe98a..876182873468 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1068,126 +1068,6 @@ static inline bool platform_pci_bridge_d3(struct pci_dev *dev) } /** - * pci_raw_set_power_state - Use PCI PM registers to set the power state of - * given PCI device - * @dev: PCI device to handle. - * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. - * - * RETURN VALUE: - * -EINVAL if the requested state is invalid. - * -EIO if device does not support PCI PM or its PM capabilities register has a - * wrong version, or device doesn't support the requested state. - * 0 if device already is in the requested state. - * 0 if device's power state has been successfully changed. - */ -static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) -{ - u16 pmcsr; - bool need_restore = false; - - /* Check if we're already there */ - if (dev->current_state == state) - return 0; - - if (!dev->pm_cap) - return -EIO; - - if (state < PCI_D0 || state > PCI_D3hot) - return -EINVAL; - - /* - * Validate transition: We can enter D0 from any state, but if - * we're already in a low-power state, we can only go deeper. E.g., - * we can go from D1 to D3, but we can't go directly from D3 to D1; - * we'd have to go from D3 to D0, then to D1. - */ - if (state != PCI_D0 && dev->current_state <= PCI_D3cold - && dev->current_state > state) { - pci_err(dev, "invalid power transition (from %s to %s)\n", - pci_power_name(dev->current_state), - pci_power_name(state)); - return -EINVAL; - } - - /* Check if this device supports the desired state */ - if ((state == PCI_D1 && !dev->d1_support) - || (state == PCI_D2 && !dev->d2_support)) - return -EIO; - - pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); - if (PCI_POSSIBLE_ERROR(pmcsr)) { - pci_err(dev, "can't change power state from %s to %s (config space inaccessible)\n", - pci_power_name(dev->current_state), - pci_power_name(state)); - return -EIO; - } - - /* - * If we're (effectively) in D3, force entire word to 0. - * This doesn't affect PME_Status, disables PME_En, and - * sets PowerState to 0. - */ - switch (dev->current_state) { - case PCI_D0: - case PCI_D1: - case PCI_D2: - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - pmcsr |= state; - break; - case PCI_D3hot: - case PCI_D3cold: - case PCI_UNKNOWN: /* Boot-up */ - if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot - && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) - need_restore = true; - fallthrough; /* force to D0 */ - default: - pmcsr = 0; - break; - } - - /* Enter specified state */ - pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); - - /* - * Mandatory power management transition delays; see PCI PM 1.1 - * 5.6.1 table 18 - */ - if (state == PCI_D3hot || dev->current_state == PCI_D3hot) - pci_dev_d3_sleep(dev); - else if (state == PCI_D2 || dev->current_state == PCI_D2) - udelay(PCI_PM_D2_DELAY); - - pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); - dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); - if (dev->current_state != state) - pci_info_ratelimited(dev, "refused to change power state from %s to %s\n", - pci_power_name(dev->current_state), - pci_power_name(state)); - - /* - * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT - * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning - * from D3hot to D0 _may_ perform an internal reset, thereby - * going to "D0 Uninitialized" rather than "D0 Initialized". - * For example, at least some versions of the 3c905B and the - * 3c556B exhibit this behaviour. - * - * At least some laptop BIOSen (e.g. the Thinkpad T21) leave - * devices in a D3hot state at boot. Consequently, we need to - * restore at least the BARs so that the device will be - * accessible to its driver. - */ - if (need_restore) - pci_restore_bars(dev); - - if (dev->bus->self) - pcie_aspm_pm_state_change(dev->bus->self); - - return 0; -} - -/** * pci_update_current_state - Read power state of given device and cache it * @dev: PCI device to handle. * @state: State to cache in case the device doesn't have the PM capability @@ -1201,14 +1081,17 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) */ void pci_update_current_state(struct pci_dev *dev, pci_power_t state) { - if (platform_pci_get_power_state(dev) == PCI_D3cold || - !pci_device_is_present(dev)) { + if (platform_pci_get_power_state(dev) == PCI_D3cold) { dev->current_state = PCI_D3cold; } else if (dev->pm_cap) { u16 pmcsr; pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); - dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + if (PCI_POSSIBLE_ERROR(pmcsr)) { + dev->current_state = PCI_D3cold; + return; + } + dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK; } else { dev->current_state = state; } @@ -1306,26 +1189,114 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout) /** * pci_power_up - Put the given device into D0 * @dev: PCI device to power up + * + * On success, return 0 or 1, depending on whether or not it is necessary to + * restore the device's BARs subsequently (1 is returned in that case). */ int pci_power_up(struct pci_dev *dev) { - pci_platform_power_transition(dev, PCI_D0); + bool need_restore; + pci_power_t state; + u16 pmcsr; + + platform_pci_set_power_state(dev, PCI_D0); + + if (!dev->pm_cap) { + state = platform_pci_get_power_state(dev); + if (state == PCI_UNKNOWN) + dev->current_state = PCI_D0; + else + dev->current_state = state; + + if (state == PCI_D0) + return 0; + + return -EIO; + } + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + if (PCI_POSSIBLE_ERROR(pmcsr)) { + pci_err(dev, "Unable to change power state from %s to D0, device inaccessible\n", + pci_power_name(dev->current_state)); + dev->current_state = PCI_D3cold; + return -EIO; + } + + state = pmcsr & PCI_PM_CTRL_STATE_MASK; + + need_restore = (state == PCI_D3hot || dev->current_state >= PCI_D3hot) && + !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET); + + if (state == PCI_D0) + goto end; /* - * Mandatory power management transition delays are handled in - * pci_pm_resume_noirq() and pci_pm_runtime_resume() of the - * corresponding bridge. + * Force the entire word to 0. This doesn't affect PME_Status, disables + * PME_En, and sets PowerState to 0. */ - if (dev->runtime_d3cold) { + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, 0); + + /* Mandatory transition delays; see PCI PM 1.2. */ + if (state == PCI_D3hot) + pci_dev_d3_sleep(dev); + else if (state == PCI_D2) + udelay(PCI_PM_D2_DELAY); + +end: + dev->current_state = PCI_D0; + if (need_restore) + return 1; + + return 0; +} + +/** + * pci_set_full_power_state - Put a PCI device into D0 and update its state + * @dev: PCI device to power up + * + * Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register + * to confirm the state change, restore its BARs if they might be lost and + * reconfigure ASPM in acordance with the new power state. + * + * If pci_restore_state() is going to be called right after a power state change + * to D0, it is more efficient to use pci_power_up() directly instead of this + * function. + */ +static int pci_set_full_power_state(struct pci_dev *dev) +{ + u16 pmcsr; + int ret; + + ret = pci_power_up(dev); + if (ret < 0) + return ret; + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK; + if (dev->current_state != PCI_D0) { + pci_info_ratelimited(dev, "Refused to change power state from %s to D0\n", + pci_power_name(dev->current_state)); + } else if (ret > 0) { /* - * When powering on a bridge from D3cold, the whole hierarchy - * may be powered on into D0uninitialized state, resume them to - * give them a chance to suspend again + * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT + * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning + * from D3hot to D0 _may_ perform an internal reset, thereby + * going to "D0 Uninitialized" rather than "D0 Initialized". + * For example, at least some versions of the 3c905B and the + * 3c556B exhibit this behaviour. + * + * At least some laptop BIOSen (e.g. the Thinkpad T21) leave + * devices in a D3hot state at boot. Consequently, we need to + * restore at least the BARs so that the device will be + * accessible to its driver. */ - pci_resume_bus(dev->subordinate); + pci_restore_bars(dev); } - return pci_raw_set_power_state(dev, PCI_D0); + if (dev->bus->self) + pcie_aspm_pm_state_change(dev->bus->self); + + return 0; } /** @@ -1353,6 +1324,79 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state) } /** + * pci_set_low_power_state - Put a PCI device into a low-power state. + * @dev: PCI device to handle. + * @state: PCI power state (D1, D2, D3hot) to put the device into. + * + * Use the device's PCI_PM_CTRL register to put it into a low-power state. + * + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if device already is in the requested state. + * 0 if device's power state has been successfully changed. + */ +static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) +{ + u16 pmcsr; + + if (!dev->pm_cap) + return -EIO; + + /* + * Validate transition: We can enter D0 from any state, but if + * we're already in a low-power state, we can only go deeper. E.g., + * we can go from D1 to D3, but we can't go directly from D3 to D1; + * we'd have to go from D3 to D0, then to D1. + */ + if (dev->current_state <= PCI_D3cold && dev->current_state > state) { + pci_dbg(dev, "Invalid power transition (from %s to %s)\n", + pci_power_name(dev->current_state), + pci_power_name(state)); + return -EINVAL; + } + + /* Check if this device supports the desired state */ + if ((state == PCI_D1 && !dev->d1_support) + || (state == PCI_D2 && !dev->d2_support)) + return -EIO; + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + if (PCI_POSSIBLE_ERROR(pmcsr)) { + pci_err(dev, "Unable to change power state from %s to %s, device inaccessible\n", + pci_power_name(dev->current_state), + pci_power_name(state)); + dev->current_state = PCI_D3cold; + return -EIO; + } + + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= state; + + /* Enter specified state */ + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); + + /* Mandatory power management transition delays; see PCI PM 1.2. */ + if (state == PCI_D3hot) + pci_dev_d3_sleep(dev); + else if (state == PCI_D2) + udelay(PCI_PM_D2_DELAY); + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK; + if (dev->current_state != state) + pci_info_ratelimited(dev, "Refused to change power state from %s to %s\n", + pci_power_name(dev->current_state), + pci_power_name(state)); + + if (dev->bus->self) + pcie_aspm_pm_state_change(dev->bus->self); + + return 0; +} + +/** * pci_set_power_state - Set the power state of a PCI device * @dev: PCI device to handle. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. @@ -1393,7 +1437,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; if (state == PCI_D0) - return pci_power_up(dev); + return pci_set_full_power_state(dev); /* * This device is quirked not to be put into D3, so don't put it in @@ -1402,19 +1446,25 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) if (state >= PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) return 0; - /* - * To put device in D3cold, we put device into D3hot in native - * way, then put device into D3cold with platform ops - */ - error = pci_raw_set_power_state(dev, state > PCI_D3hot ? - PCI_D3hot : state); + if (state == PCI_D3cold) { + /* + * To put the device in D3cold, put it into D3hot in the native + * way, then put it into D3cold using platform ops. + */ + error = pci_set_low_power_state(dev, PCI_D3hot); + + if (pci_platform_power_transition(dev, PCI_D3cold)) + return error; - if (pci_platform_power_transition(dev, state)) - return error; + /* Powering off a bridge may power off the whole hierarchy */ + if (dev->current_state == PCI_D3cold) + pci_bus_set_current_state(dev->subordinate, PCI_D3cold); + } else { + error = pci_set_low_power_state(dev, state); - /* Powering off a bridge may power off the whole hierarchy */ - if (state == PCI_D3cold) - pci_bus_set_current_state(dev->subordinate, PCI_D3cold); + if (pci_platform_power_transition(dev, state)) + return error; + } return 0; } @@ -2718,8 +2768,6 @@ int pci_finish_runtime_suspend(struct pci_dev *dev) if (target_state == PCI_POWER_ERROR) return -EIO; - dev->runtime_d3cold = target_state == PCI_D3cold; - /* * There are systems (for example, Intel mobile chips since Coffee * Lake) where the power drawn while suspended can be significantly @@ -2737,7 +2785,6 @@ int pci_finish_runtime_suspend(struct pci_dev *dev) if (error) { pci_enable_wake(dev, target_state, false); pci_restore_ptm_state(dev); - dev->runtime_d3cold = false; } return error; @@ -5113,19 +5160,19 @@ static int pci_reset_bus_function(struct pci_dev *dev, bool probe) void pci_dev_lock(struct pci_dev *dev) { - pci_cfg_access_lock(dev); /* block PM suspend, driver probe, etc. */ device_lock(&dev->dev); + pci_cfg_access_lock(dev); } EXPORT_SYMBOL_GPL(pci_dev_lock); /* Return 1 on successful lock, 0 on contention */ int pci_dev_trylock(struct pci_dev *dev) { - if (pci_cfg_access_trylock(dev)) { - if (device_trylock(&dev->dev)) + if (device_trylock(&dev->dev)) { + if (pci_cfg_access_trylock(dev)) return 1; - pci_cfg_access_unlock(dev); + device_unlock(&dev->dev); } return 0; @@ -5134,8 +5181,8 @@ EXPORT_SYMBOL_GPL(pci_dev_trylock); void pci_dev_unlock(struct pci_dev *dev) { - device_unlock(&dev->dev); pci_cfg_access_unlock(dev); + device_unlock(&dev->dev); } EXPORT_SYMBOL_GPL(pci_dev_unlock); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 3d60cabde1a1..e10cdec6c56e 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -627,6 +627,9 @@ struct device_node; int of_pci_parse_bus_range(struct device_node *node, struct resource *res); int of_get_pci_domain_nr(struct device_node *node); int of_pci_get_max_link_speed(struct device_node *node); +u32 of_pci_get_slot_power_limit(struct device_node *node, + u8 *slot_power_limit_value, + u8 *slot_power_limit_scale); void pci_set_of_node(struct pci_dev *dev); void pci_release_of_node(struct pci_dev *dev); void pci_set_bus_of_node(struct pci_bus *bus); @@ -653,6 +656,18 @@ of_pci_get_max_link_speed(struct device_node *node) return -EINVAL; } +static inline u32 +of_pci_get_slot_power_limit(struct device_node *node, + u8 *slot_power_limit_value, + u8 *slot_power_limit_scale) +{ + if (slot_power_limit_value) + *slot_power_limit_value = 0; + if (slot_power_limit_scale) + *slot_power_limit_scale = 0; + return 0; +} + static inline void pci_set_of_node(struct pci_dev *dev) { } static inline void pci_release_of_node(struct pci_dev *dev) { } static inline void pci_set_bus_of_node(struct pci_bus *bus) { } diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c index 9fa1f97e5b27..7952e5efd6cf 100644 --- a/drivers/pci/pcie/aer.c +++ b/drivers/pci/pcie/aer.c @@ -101,6 +101,11 @@ struct aer_stats { #define ERR_COR_ID(d) (d & 0xffff) #define ERR_UNCOR_ID(d) (d >> 16) +#define AER_ERR_STATUS_MASK (PCI_ERR_ROOT_UNCOR_RCV | \ + PCI_ERR_ROOT_COR_RCV | \ + PCI_ERR_ROOT_MULTI_COR_RCV | \ + PCI_ERR_ROOT_MULTI_UNCOR_RCV) + static int pcie_aer_disable; static pci_ers_result_t aer_root_reset(struct pci_dev *dev); @@ -1196,7 +1201,7 @@ static irqreturn_t aer_irq(int irq, void *context) struct aer_err_source e_src = {}; pci_read_config_dword(rp, aer + PCI_ERR_ROOT_STATUS, &e_src.status); - if (!(e_src.status & (PCI_ERR_ROOT_UNCOR_RCV|PCI_ERR_ROOT_COR_RCV))) + if (!(e_src.status & AER_ERR_STATUS_MASK)) return IRQ_NONE; pci_read_config_dword(rp, aer + PCI_ERR_ROOT_ERR_SRC, &e_src.id); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index da829274fc66..41aeaa235132 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -12,6 +12,7 @@ * file, where their drivers can use them. */ +#include <linux/bitfield.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/export.h> @@ -5895,3 +5896,49 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1533, rom_bar_overlap_defect); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1536, rom_bar_overlap_defect); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1537, rom_bar_overlap_defect); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1538, rom_bar_overlap_defect); + +#ifdef CONFIG_PCIEASPM +/* + * Several Intel DG2 graphics devices advertise that they can only tolerate + * 1us latency when transitioning from L1 to L0, which may prevent ASPM L1 + * from being enabled. But in fact these devices can tolerate unlimited + * latency. Override their Device Capabilities value to allow ASPM L1 to + * be enabled. + */ +static void aspm_l1_acceptable_latency(struct pci_dev *dev) +{ + u32 l1_lat = FIELD_GET(PCI_EXP_DEVCAP_L1, dev->devcap); + + if (l1_lat < 7) { + dev->devcap |= FIELD_PREP(PCI_EXP_DEVCAP_L1, 7); + pci_info(dev, "ASPM: overriding L1 acceptable latency from %#x to 0x7\n", + l1_lat); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f80, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f81, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f82, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f83, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f84, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f85, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f86, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f87, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x4f88, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5690, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5691, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5692, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5693, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5694, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x5695, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a0, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a1, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a2, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a3, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a4, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a5, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56a6, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b0, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56b1, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c0, aspm_l1_acceptable_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x56c1, aspm_l1_acceptable_latency); +#endif |