aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/thermal/Kconfig4
-rw-r--r--drivers/thermal/armada_thermal.c253
-rw-r--r--drivers/thermal/hisi_thermal.c2
-rw-r--r--drivers/thermal/imx_thermal.c74
-rw-r--r--drivers/thermal/int340x_thermal/int3400_thermal.c12
-rw-r--r--drivers/thermal/mtk_thermal.c9
-rw-r--r--drivers/thermal/of-thermal.c1
-rw-r--r--drivers/thermal/power_allocator.c2
-rw-r--r--drivers/thermal/tegra/soctherm.c103
-rw-r--r--drivers/thermal/thermal_hwmon.c20
-rw-r--r--drivers/thermal/x86_pkg_temp_thermal.c4
11 files changed, 286 insertions, 198 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 315ae2926e20..b6adc54b96f1 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -301,13 +301,13 @@ config DB8500_THERMAL
thermal zone if trip points reached.
config ARMADA_THERMAL
- tristate "Armada 370/XP thermal management"
+ tristate "Marvell EBU Armada SoCs thermal management"
depends on ARCH_MVEBU || COMPILE_TEST
depends on HAS_IOMEM
depends on OF
help
Enable this option if you want to have support for thermal management
- controller present in Armada 370 and Armada XP SoC.
+ controller present in Marvell EBU Armada SoCs (370,375,XP,38x,7K,8K).
config DA9062_THERMAL
tristate "DA9062/DA9061 Dialog Semiconductor thermal driver"
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 706d74798cbe..4c275ec10ac5 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -1,5 +1,5 @@
/*
- * Marvell Armada 370/XP thermal sensor driver
+ * Marvell EBU Armada SoCs thermal sensor driver
*
* Copyright (C) 2013 Marvell
*
@@ -23,8 +23,7 @@
#include <linux/platform_device.h>
#include <linux/of_device.h>
#include <linux/thermal.h>
-
-#define THERMAL_VALID_MASK 0x1
+#include <linux/iopoll.h>
/* Thermal Manager Control and Status Register */
#define PMU_TDC0_SW_RST_MASK (0x1 << 1)
@@ -39,14 +38,38 @@
#define A375_UNIT_CONTROL_MASK 0x7
#define A375_READOUT_INVERT BIT(15)
#define A375_HW_RESETn BIT(8)
-#define A380_HW_RESET BIT(8)
+
+/* Legacy bindings */
+#define LEGACY_CONTROL_MEM_LEN 0x4
+
+/* Current bindings with the 2 control registers under the same memory area */
+#define LEGACY_CONTROL1_OFFSET 0x0
+#define CONTROL0_OFFSET 0x0
+#define CONTROL1_OFFSET 0x4
+
+/* Errata fields */
+#define CONTROL0_TSEN_TC_TRIM_MASK 0x7
+#define CONTROL0_TSEN_TC_TRIM_VAL 0x3
+
+/* TSEN refers to the temperature sensors within the AP */
+#define CONTROL0_TSEN_START BIT(0)
+#define CONTROL0_TSEN_RESET BIT(1)
+#define CONTROL0_TSEN_ENABLE BIT(2)
+
+/* EXT_TSEN refers to the external temperature sensors, out of the AP */
+#define CONTROL1_EXT_TSEN_SW_RESET BIT(7)
+#define CONTROL1_EXT_TSEN_HW_RESETn BIT(8)
+
+#define STATUS_POLL_PERIOD_US 1000
+#define STATUS_POLL_TIMEOUT_US 100000
struct armada_thermal_data;
/* Marvell EBU Thermal Sensor Dev Structure */
struct armada_thermal_priv {
- void __iomem *sensor;
- void __iomem *control;
+ void __iomem *status;
+ void __iomem *control0;
+ void __iomem *control1;
struct armada_thermal_data *data;
};
@@ -59,107 +82,142 @@ struct armada_thermal_data {
bool (*is_valid)(struct armada_thermal_priv *);
/* Formula coeficients: temp = (b - m * reg) / div */
- unsigned long coef_b;
- unsigned long coef_m;
- unsigned long coef_div;
+ s64 coef_b;
+ s64 coef_m;
+ u32 coef_div;
bool inverted;
+ bool signed_sample;
/* Register shift and mask to access the sensor temperature */
unsigned int temp_shift;
unsigned int temp_mask;
- unsigned int is_valid_shift;
+ u32 is_valid_bit;
+ bool needs_control0;
};
static void armadaxp_init_sensor(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
- unsigned long reg;
+ u32 reg;
- reg = readl_relaxed(priv->control);
+ reg = readl_relaxed(priv->control1);
reg |= PMU_TDC0_OTF_CAL_MASK;
- writel(reg, priv->control);
+ writel(reg, priv->control1);
/* Reference calibration value */
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
- writel(reg, priv->control);
+ writel(reg, priv->control1);
/* Reset the sensor */
- reg = readl_relaxed(priv->control);
- writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
+ reg = readl_relaxed(priv->control1);
+ writel((reg | PMU_TDC0_SW_RST_MASK), priv->control1);
- writel(reg, priv->control);
+ writel(reg, priv->control1);
/* Enable the sensor */
- reg = readl_relaxed(priv->sensor);
+ reg = readl_relaxed(priv->status);
reg &= ~PMU_TM_DISABLE_MASK;
- writel(reg, priv->sensor);
+ writel(reg, priv->status);
}
static void armada370_init_sensor(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
- unsigned long reg;
+ u32 reg;
- reg = readl_relaxed(priv->control);
+ reg = readl_relaxed(priv->control1);
reg |= PMU_TDC0_OTF_CAL_MASK;
- writel(reg, priv->control);
+ writel(reg, priv->control1);
/* Reference calibration value */
reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
- writel(reg, priv->control);
+ writel(reg, priv->control1);
reg &= ~PMU_TDC0_START_CAL_MASK;
- writel(reg, priv->control);
+ writel(reg, priv->control1);
- mdelay(10);
+ msleep(10);
}
static void armada375_init_sensor(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
- unsigned long reg;
+ u32 reg;
- reg = readl(priv->control + 4);
+ reg = readl(priv->control1);
reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
reg &= ~A375_READOUT_INVERT;
reg &= ~A375_HW_RESETn;
- writel(reg, priv->control + 4);
- mdelay(20);
+ writel(reg, priv->control1);
+ msleep(20);
reg |= A375_HW_RESETn;
- writel(reg, priv->control + 4);
- mdelay(50);
+ writel(reg, priv->control1);
+ msleep(50);
+}
+
+static void armada_wait_sensor_validity(struct armada_thermal_priv *priv)
+{
+ u32 reg;
+
+ readl_relaxed_poll_timeout(priv->status, reg,
+ reg & priv->data->is_valid_bit,
+ STATUS_POLL_PERIOD_US,
+ STATUS_POLL_TIMEOUT_US);
}
static void armada380_init_sensor(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
- unsigned long reg = readl_relaxed(priv->control);
-
- /* Reset hardware once */
- if (!(reg & A380_HW_RESET)) {
- reg |= A380_HW_RESET;
- writel(reg, priv->control);
- mdelay(10);
+ u32 reg = readl_relaxed(priv->control1);
+
+ /* Disable the HW/SW reset */
+ reg |= CONTROL1_EXT_TSEN_HW_RESETn;
+ reg &= ~CONTROL1_EXT_TSEN_SW_RESET;
+ writel(reg, priv->control1);
+
+ /* Set Tsen Tc Trim to correct default value (errata #132698) */
+ if (priv->control0) {
+ reg = readl_relaxed(priv->control0);
+ reg &= ~CONTROL0_TSEN_TC_TRIM_MASK;
+ reg |= CONTROL0_TSEN_TC_TRIM_VAL;
+ writel(reg, priv->control0);
}
+
+ /* Wait the sensors to be valid or the core will warn the user */
+ armada_wait_sensor_validity(priv);
+}
+
+static void armada_ap806_init_sensor(struct platform_device *pdev,
+ struct armada_thermal_priv *priv)
+{
+ u32 reg;
+
+ reg = readl_relaxed(priv->control0);
+ reg &= ~CONTROL0_TSEN_RESET;
+ reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE;
+ writel(reg, priv->control0);
+
+ /* Wait the sensors to be valid or the core will warn the user */
+ armada_wait_sensor_validity(priv);
}
static bool armada_is_valid(struct armada_thermal_priv *priv)
{
- unsigned long reg = readl_relaxed(priv->sensor);
+ u32 reg = readl_relaxed(priv->status);
- return (reg >> priv->data->is_valid_shift) & THERMAL_VALID_MASK;
+ return reg & priv->data->is_valid_bit;
}
static int armada_get_temp(struct thermal_zone_device *thermal,
- int *temp)
+ int *temp)
{
struct armada_thermal_priv *priv = thermal->devdata;
- unsigned long reg;
- unsigned long m, b, div;
+ u32 reg, div;
+ s64 sample, b, m;
/* Valid check */
if (priv->data->is_valid && !priv->data->is_valid(priv)) {
@@ -168,8 +226,13 @@ static int armada_get_temp(struct thermal_zone_device *thermal,
return -EIO;
}
- reg = readl_relaxed(priv->sensor);
+ reg = readl_relaxed(priv->status);
reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
+ if (priv->data->signed_sample)
+ /* The most significant bit is the sign bit */
+ sample = sign_extend32(reg, fls(priv->data->temp_mask) - 1);
+ else
+ sample = reg;
/* Get formula coeficients */
b = priv->data->coef_b;
@@ -177,9 +240,10 @@ static int armada_get_temp(struct thermal_zone_device *thermal,
div = priv->data->coef_div;
if (priv->data->inverted)
- *temp = ((m * reg) - b) / div;
+ *temp = div_s64((m * sample) - b, div);
else
- *temp = (b - (m * reg)) / div;
+ *temp = div_s64(b - (m * sample), div);
+
return 0;
}
@@ -191,45 +255,73 @@ static const struct armada_thermal_data armadaxp_data = {
.init_sensor = armadaxp_init_sensor,
.temp_shift = 10,
.temp_mask = 0x1ff,
- .coef_b = 3153000000UL,
- .coef_m = 10000000UL,
+ .coef_b = 3153000000ULL,
+ .coef_m = 10000000ULL,
.coef_div = 13825,
};
static const struct armada_thermal_data armada370_data = {
.is_valid = armada_is_valid,
.init_sensor = armada370_init_sensor,
- .is_valid_shift = 9,
+ .is_valid_bit = BIT(9),
.temp_shift = 10,
.temp_mask = 0x1ff,
- .coef_b = 3153000000UL,
- .coef_m = 10000000UL,
+ .coef_b = 3153000000ULL,
+ .coef_m = 10000000ULL,
.coef_div = 13825,
};
static const struct armada_thermal_data armada375_data = {
.is_valid = armada_is_valid,
.init_sensor = armada375_init_sensor,
- .is_valid_shift = 10,
+ .is_valid_bit = BIT(10),
.temp_shift = 0,
.temp_mask = 0x1ff,
- .coef_b = 3171900000UL,
- .coef_m = 10000000UL,
+ .coef_b = 3171900000ULL,
+ .coef_m = 10000000ULL,
.coef_div = 13616,
+ .needs_control0 = true,
};
static const struct armada_thermal_data armada380_data = {
.is_valid = armada_is_valid,
.init_sensor = armada380_init_sensor,
- .is_valid_shift = 10,
+ .is_valid_bit = BIT(10),
.temp_shift = 0,
.temp_mask = 0x3ff,
- .coef_b = 1172499100UL,
- .coef_m = 2000096UL,
+ .coef_b = 1172499100ULL,
+ .coef_m = 2000096ULL,
.coef_div = 4201,
.inverted = true,
};
+static const struct armada_thermal_data armada_ap806_data = {
+ .is_valid = armada_is_valid,
+ .init_sensor = armada_ap806_init_sensor,
+ .is_valid_bit = BIT(16),
+ .temp_shift = 0,
+ .temp_mask = 0x3ff,
+ .coef_b = -150000LL,
+ .coef_m = 423ULL,
+ .coef_div = 1,
+ .inverted = true,
+ .signed_sample = true,
+ .needs_control0 = true,
+};
+
+static const struct armada_thermal_data armada_cp110_data = {
+ .is_valid = armada_is_valid,
+ .init_sensor = armada380_init_sensor,
+ .is_valid_bit = BIT(10),
+ .temp_shift = 0,
+ .temp_mask = 0x3ff,
+ .coef_b = 1172499100ULL,
+ .coef_m = 2000096ULL,
+ .coef_div = 4201,
+ .inverted = true,
+ .needs_control0 = true,
+};
+
static const struct of_device_id armada_thermal_id_table[] = {
{
.compatible = "marvell,armadaxp-thermal",
@@ -248,6 +340,14 @@ static const struct of_device_id armada_thermal_id_table[] = {
.data = &armada380_data,
},
{
+ .compatible = "marvell,armada-ap806-thermal",
+ .data = &armada_ap806_data,
+ },
+ {
+ .compatible = "marvell,armada-cp110-thermal",
+ .data = &armada_cp110_data,
+ },
+ {
/* sentinel */
},
};
@@ -255,6 +355,7 @@ MODULE_DEVICE_TABLE(of, armada_thermal_id_table);
static int armada_thermal_probe(struct platform_device *pdev)
{
+ void __iomem *control = NULL;
struct thermal_zone_device *thermal;
const struct of_device_id *match;
struct armada_thermal_priv *priv;
@@ -269,20 +370,40 @@ static int armada_thermal_probe(struct platform_device *pdev)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->sensor = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(priv->sensor))
- return PTR_ERR(priv->sensor);
+ priv->status = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->status))
+ return PTR_ERR(priv->status);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- priv->control = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(priv->control))
- return PTR_ERR(priv->control);
+ control = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control))
+ return PTR_ERR(control);
priv->data = (struct armada_thermal_data *)match->data;
+
+ /*
+ * Legacy DT bindings only described "control1" register (also referred
+ * as "control MSB" on old documentation). New bindings cover
+ * "control0/control LSB" and "control1/control MSB" registers within
+ * the same resource, which is then of size 8 instead of 4.
+ */
+ if (resource_size(res) == LEGACY_CONTROL_MEM_LEN) {
+ /* ->control0 unavailable in this configuration */
+ if (priv->data->needs_control0) {
+ dev_err(&pdev->dev, "No access to control0 register\n");
+ return -EINVAL;
+ }
+
+ priv->control1 = control + LEGACY_CONTROL1_OFFSET;
+ } else {
+ priv->control0 = control + CONTROL0_OFFSET;
+ priv->control1 = control + CONTROL1_OFFSET;
+ }
+
priv->data->init_sensor(pdev, priv);
- thermal = thermal_zone_device_register("armada_thermal", 0, 0,
- priv, &ops, NULL, 0, 0);
+ thermal = thermal_zone_device_register(dev_name(&pdev->dev), 0, 0, priv,
+ &ops, NULL, 0, 0);
if (IS_ERR(thermal)) {
dev_err(&pdev->dev,
"Failed to register thermal zone device\n");
@@ -316,5 +437,5 @@ static struct platform_driver armada_thermal_driver = {
module_platform_driver(armada_thermal_driver);
MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
-MODULE_DESCRIPTION("Armada 370/XP thermal driver");
+MODULE_DESCRIPTION("Marvell EBU Armada SoCs thermal driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 2d855a96cdd9..761d0559c268 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -527,7 +527,7 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
static int hisi_thermal_probe(struct platform_device *pdev)
{
struct hisi_thermal_data *data;
- int const (*platform_probe)(struct hisi_thermal_data *);
+ int (*platform_probe)(struct hisi_thermal_data *);
struct device *dev = &pdev->dev;
int ret;
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index e7d4ffc3de7f..a67781b7a0b2 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -70,10 +70,6 @@ enum imx_thermal_trip {
#define IMX_POLLING_DELAY 2000 /* millisecond */
#define IMX_PASSIVE_DELAY 1000
-#define FACTOR0 10000000
-#define FACTOR1 15976
-#define FACTOR2 4297157
-
#define TEMPMON_IMX6Q 1
#define TEMPMON_IMX6SX 2
@@ -347,78 +343,74 @@ static struct thermal_zone_device_ops imx_tz_ops = {
.set_trip_temp = imx_set_trip_temp,
};
-static int imx_init_calib(struct platform_device *pdev, u32 val)
+static int imx_init_calib(struct platform_device *pdev, u32 ocotp_ana1)
{
struct imx_thermal_data *data = platform_get_drvdata(pdev);
- int t1, n1;
+ int n1;
u64 temp64;
- if (val == 0 || val == ~0) {
+ if (ocotp_ana1 == 0 || ocotp_ana1 == ~0) {
dev_err(&pdev->dev, "invalid sensor calibration data\n");
return -EINVAL;
}
/*
- * Sensor data layout:
- * [31:20] - sensor value @ 25C
- * Use universal formula now and only need sensor value @ 25C
- * slope = 0.4297157 - (0.0015976 * 25C fuse)
+ * The sensor is calibrated at 25 °C (aka T1) and the value measured
+ * (aka N1) at this temperature is provided in bits [31:20] in the
+ * i.MX's OCOTP value ANA1.
+ * To find the actual temperature T, the following formula has to be used
+ * when reading value n from the sensor:
+ *
+ * T = T1 + (N - N1) / (0.4148468 - 0.0015423 * N1) °C + 3.580661 °C
+ * = [T1' - N1 / (0.4148468 - 0.0015423 * N1) °C] + N / (0.4148468 - 0.0015423 * N1) °C
+ * = [T1' + N1 / (0.0015423 * N1 - 0.4148468) °C] - N / (0.0015423 * N1 - 0.4148468) °C
+ * = c2 - c1 * N
+ *
+ * with
+ *
+ * T1' = 28.580661 °C
+ * c1 = 1 / (0.0015423 * N1 - 0.4297157) °C
+ * c2 = T1' + N1 / (0.0015423 * N1 - 0.4148468) °C
+ * = T1' + N1 * c1
*/
- n1 = val >> 20;
- t1 = 25; /* t1 always 25C */
+ n1 = ocotp_ana1 >> 20;
- /*
- * Derived from linear interpolation:
- * slope = 0.4297157 - (0.0015976 * 25C fuse)
- * slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0
- * (Nmeas - n1) / (Tmeas - t1) = slope
- * We want to reduce this down to the minimum computation necessary
- * for each temperature read. Also, we want Tmeas in millicelsius
- * and we don't want to lose precision from integer division. So...
- * Tmeas = (Nmeas - n1) / slope + t1
- * milli_Tmeas = 1000 * (Nmeas - n1) / slope + 1000 * t1
- * milli_Tmeas = -1000 * (n1 - Nmeas) / slope + 1000 * t1
- * Let constant c1 = (-1000 / slope)
- * milli_Tmeas = (n1 - Nmeas) * c1 + 1000 * t1
- * Let constant c2 = n1 *c1 + 1000 * t1
- * milli_Tmeas = c2 - Nmeas * c1
- */
- temp64 = FACTOR0;
- temp64 *= 1000;
- do_div(temp64, FACTOR1 * n1 - FACTOR2);
+ temp64 = 10000000; /* use 10^7 as fixed point constant for values in formula */
+ temp64 *= 1000; /* to get result in °mC */
+ do_div(temp64, 15423 * n1 - 4148468);
data->c1 = temp64;
- data->c2 = n1 * data->c1 + 1000 * t1;
+ data->c2 = n1 * data->c1 + 28581;
return 0;
}
-static void imx_init_temp_grade(struct platform_device *pdev, u32 val)
+static void imx_init_temp_grade(struct platform_device *pdev, u32 ocotp_mem0)
{
struct imx_thermal_data *data = platform_get_drvdata(pdev);
/* The maximum die temp is specified by the Temperature Grade */
- switch ((val >> 6) & 0x3) {
- case 0: /* Commercial (0 to 95C) */
+ switch ((ocotp_mem0 >> 6) & 0x3) {
+ case 0: /* Commercial (0 to 95 °C) */
data->temp_grade = "Commercial";
data->temp_max = 95000;
break;
- case 1: /* Extended Commercial (-20 to 105C) */
+ case 1: /* Extended Commercial (-20 °C to 105 °C) */
data->temp_grade = "Extended Commercial";
data->temp_max = 105000;
break;
- case 2: /* Industrial (-40 to 105C) */
+ case 2: /* Industrial (-40 °C to 105 °C) */
data->temp_grade = "Industrial";
data->temp_max = 105000;
break;
- case 3: /* Automotive (-40 to 125C) */
+ case 3: /* Automotive (-40 °C to 125 °C) */
data->temp_grade = "Automotive";
data->temp_max = 125000;
break;
}
/*
- * Set the critical trip point at 5C under max
- * Set the passive trip point at 10C under max (can change via sysfs)
+ * Set the critical trip point at 5 °C under max
+ * Set the passive trip point at 10 °C under max (changeable via sysfs)
*/
data->temp_critical = data->temp_max - (1000 * 5);
data->temp_passive = data->temp_max - (1000 * 10);
diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c
index 8ee38f55c7f3..e26b01c05e82 100644
--- a/drivers/thermal/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3400_thermal.c
@@ -211,7 +211,7 @@ static void int3400_notify(acpi_handle handle,
thermal_prop);
break;
default:
- dev_err(&priv->adev->dev, "Unsupported event [0x%x]\n", event);
+ /* Ignore unknown notification codes sent to INT3400 device */
break;
}
}
@@ -319,17 +319,21 @@ static int int3400_thermal_probe(struct platform_device *pdev)
result = sysfs_create_group(&pdev->dev.kobj, &uuid_attribute_group);
if (result)
- goto free_zone;
+ goto free_rel_misc;
result = acpi_install_notify_handler(
priv->adev->handle, ACPI_DEVICE_NOTIFY, int3400_notify,
(void *)priv);
if (result)
- goto free_zone;
+ goto free_sysfs;
return 0;
-free_zone:
+free_sysfs:
+ sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group);
+free_rel_misc:
+ if (!priv->rel_misc_dev_res)
+ acpi_thermal_rel_misc_device_remove(priv->adev->handle);
thermal_zone_device_unregister(priv->thermal);
free_art_trt:
kfree(priv->trts);
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 1e61c09153c9..c75661a3801a 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -32,15 +32,10 @@
#include <linux/types.h>
/* AUXADC Registers */
-#define AUXADC_CON0_V 0x000
-#define AUXADC_CON1_V 0x004
#define AUXADC_CON1_SET_V 0x008
#define AUXADC_CON1_CLR_V 0x00c
#define AUXADC_CON2_V 0x010
#define AUXADC_DATA(channel) (0x14 + (channel) * 4)
-#define AUXADC_MISC_V 0x094
-
-#define AUXADC_CON1_CHANNEL(x) BIT(x)
#define APMIXED_SYS_TS_CON1 0x604
@@ -158,8 +153,6 @@
/* The number of sensing points per bank */
#define MT2712_NUM_SENSORS_PER_ZONE 4
-#define THERMAL_NAME "mtk-thermal"
-
struct mtk_thermal;
struct thermal_bank_cfg {
@@ -765,7 +758,7 @@ static struct platform_driver mtk_thermal_driver = {
.probe = mtk_thermal_probe,
.remove = mtk_thermal_remove,
.driver = {
- .name = THERMAL_NAME,
+ .name = "mtk-thermal",
.of_match_table = mtk_thermal_of_match,
},
};
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index d04ec3b9e5ff..e09f0354a4bc 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -30,7 +30,6 @@
#include <linux/err.h>
#include <linux/export.h>
#include <linux/string.h>
-#include <linux/thermal.h>
#include "thermal_core.h"
diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/power_allocator.c
index b4d3116cfdaf..3055f9a12a17 100644
--- a/drivers/thermal/power_allocator.c
+++ b/drivers/thermal/power_allocator.c
@@ -523,6 +523,7 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
struct thermal_instance *instance;
struct power_allocator_params *params = tz->governor_data;
+ mutex_lock(&tz->lock);
list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
if ((instance->trip != params->trip_max_desired_temperature) ||
(!cdev_is_power_actor(instance->cdev)))
@@ -534,6 +535,7 @@ static void allow_maximum_power(struct thermal_zone_device *tz)
mutex_unlock(&instance->cdev->lock);
thermal_cdev_update(instance->cdev);
}
+ mutex_unlock(&tz->lock);
}
/**
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 075db1de5e53..455b58ce2652 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -341,62 +341,6 @@ static int tegra_thermctl_get_temp(void *data, int *out_temp)
return 0;
}
-static int
-thermtrip_program(struct device *dev, const struct tegra_tsensor_group *sg,
- int trip_temp);
-static int
-throttrip_program(struct device *dev, const struct tegra_tsensor_group *sg,
- struct soctherm_throt_cfg *stc, int trip_temp);
-static struct soctherm_throt_cfg *
-find_throttle_cfg_by_name(struct tegra_soctherm *ts, const char *name);
-
-static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
-{
- struct tegra_thermctl_zone *zone = data;
- struct thermal_zone_device *tz = zone->tz;
- struct tegra_soctherm *ts = zone->ts;
- const struct tegra_tsensor_group *sg = zone->sg;
- struct device *dev = zone->dev;
- enum thermal_trip_type type;
- int ret;
-
- if (!tz)
- return -EINVAL;
-
- ret = tz->ops->get_trip_type(tz, trip, &type);
- if (ret)
- return ret;
-
- if (type == THERMAL_TRIP_CRITICAL) {
- return thermtrip_program(dev, sg, temp);
- } else if (type == THERMAL_TRIP_HOT) {
- int i;
-
- for (i = 0; i < THROTTLE_SIZE; i++) {
- struct thermal_cooling_device *cdev;
- struct soctherm_throt_cfg *stc;
-
- if (!ts->throt_cfgs[i].init)
- continue;
-
- cdev = ts->throt_cfgs[i].cdev;
- if (get_thermal_instance(tz, cdev, trip))
- stc = find_throttle_cfg_by_name(ts, cdev->type);
- else
- continue;
-
- return throttrip_program(dev, sg, stc, temp);
- }
- }
-
- return 0;
-}
-
-static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
- .get_temp = tegra_thermctl_get_temp,
- .set_trip_temp = tegra_thermctl_set_trip_temp,
-};
-
/**
* enforce_temp_range() - check and enforce temperature range [min, max]
* @trip_temp: the trip temperature to check
@@ -527,6 +471,53 @@ find_throttle_cfg_by_name(struct tegra_soctherm *ts, const char *name)
return NULL;
}
+static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
+{
+ struct tegra_thermctl_zone *zone = data;
+ struct thermal_zone_device *tz = zone->tz;
+ struct tegra_soctherm *ts = zone->ts;
+ const struct tegra_tsensor_group *sg = zone->sg;
+ struct device *dev = zone->dev;
+ enum thermal_trip_type type;
+ int ret;
+
+ if (!tz)
+ return -EINVAL;
+
+ ret = tz->ops->get_trip_type(tz, trip, &type);
+ if (ret)
+ return ret;
+
+ if (type == THERMAL_TRIP_CRITICAL) {
+ return thermtrip_program(dev, sg, temp);
+ } else if (type == THERMAL_TRIP_HOT) {
+ int i;
+
+ for (i = 0; i < THROTTLE_SIZE; i++) {
+ struct thermal_cooling_device *cdev;
+ struct soctherm_throt_cfg *stc;
+
+ if (!ts->throt_cfgs[i].init)
+ continue;
+
+ cdev = ts->throt_cfgs[i].cdev;
+ if (get_thermal_instance(tz, cdev, trip))
+ stc = find_throttle_cfg_by_name(ts, cdev->type);
+ else
+ continue;
+
+ return throttrip_program(dev, sg, stc, temp);
+ }
+ }
+
+ return 0;
+}
+
+static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
+ .get_temp = tegra_thermctl_get_temp,
+ .set_trip_temp = tegra_thermctl_set_trip_temp,
+};
+
static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
{
int ntrips, i, ret;
diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c
index 541af5946203..c4a508a124dc 100644
--- a/drivers/thermal/thermal_hwmon.c
+++ b/drivers/thermal/thermal_hwmon.c
@@ -59,14 +59,6 @@ static LIST_HEAD(thermal_hwmon_list);
static DEFINE_MUTEX(thermal_hwmon_list_lock);
static ssize_t
-name_show(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev);
- return sprintf(buf, "%s\n", hwmon->type);
-}
-static DEVICE_ATTR_RO(name);
-
-static ssize_t
temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
{
int temperature;
@@ -165,15 +157,12 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
INIT_LIST_HEAD(&hwmon->tz_list);
strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH);
- hwmon->device = hwmon_device_register(NULL);
+ hwmon->device = hwmon_device_register_with_info(NULL, hwmon->type,
+ hwmon, NULL, NULL);
if (IS_ERR(hwmon->device)) {
result = PTR_ERR(hwmon->device);
goto free_mem;
}
- dev_set_drvdata(hwmon->device, hwmon);
- result = device_create_file(hwmon->device, &dev_attr_name);
- if (result)
- goto free_mem;
register_sys_interface:
temp = kzalloc(sizeof(*temp), GFP_KERNEL);
@@ -222,10 +211,8 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
free_temp_mem:
kfree(temp);
unregister_name:
- if (new_hwmon_device) {
- device_remove_file(hwmon->device, &dev_attr_name);
+ if (new_hwmon_device)
hwmon_device_unregister(hwmon->device);
- }
free_mem:
if (new_hwmon_device)
kfree(hwmon);
@@ -267,7 +254,6 @@ void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
list_del(&hwmon->node);
mutex_unlock(&thermal_hwmon_list_lock);
- device_remove_file(hwmon->device, &dev_attr_name);
hwmon_device_unregister(hwmon->device);
kfree(hwmon);
}
diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c
index d93eee2f101b..1a6c88b10a39 100644
--- a/drivers/thermal/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/x86_pkg_temp_thermal.c
@@ -96,12 +96,12 @@ static int pkg_temp_debugfs_init(void)
return -ENOENT;
d = debugfs_create_u32("pkg_thres_interrupt", S_IRUGO, debugfs,
- (u32 *)&pkg_interrupt_cnt);
+ &pkg_interrupt_cnt);
if (!d)
goto err_out;
d = debugfs_create_u32("pkg_thres_work", S_IRUGO, debugfs,
- (u32 *)&pkg_work_cnt);
+ &pkg_work_cnt);
if (!d)
goto err_out;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 03:42:36 +0000