diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/nand/pxa3xx_nand.c | 86 |
1 files changed, 69 insertions, 17 deletions
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 84a6c649100c..5062eddad834 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -58,6 +58,7 @@ #define NDPCR (0x18) /* Page Count Register */ #define NDBDR0 (0x1C) /* Bad Block Register 0 */ #define NDBDR1 (0x20) /* Bad Block Register 1 */ +#define NDECCCTRL (0x28) /* ECC control */ #define NDDB (0x40) /* Data Buffer */ #define NDCB0 (0x48) /* Command Buffer0 */ #define NDCB1 (0x4C) /* Command Buffer1 */ @@ -198,6 +199,7 @@ struct pxa3xx_nand_info { int cs; int use_ecc; /* use HW ECC ? */ + int ecc_bch; /* using BCH ECC? */ int use_dma; /* use DMA ? */ int use_spare; /* use spare ? */ int need_wait; @@ -205,6 +207,8 @@ struct pxa3xx_nand_info { unsigned int fifo_size; /* max. data size in the FIFO */ unsigned int data_size; /* data to be read from FIFO */ unsigned int oob_size; + unsigned int spare_size; + unsigned int ecc_size; int retcode; /* cached register value */ @@ -335,19 +339,12 @@ static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info) int oob_enable = info->reg_ndcr & NDCR_SPARE_EN; info->data_size = info->fifo_size; - if (!oob_enable) { - info->oob_size = 0; + if (!oob_enable) return; - } - switch (info->fifo_size) { - case 2048: - info->oob_size = (info->use_ecc) ? 40 : 64; - break; - case 512: - info->oob_size = (info->use_ecc) ? 8 : 16; - break; - } + info->oob_size = info->spare_size; + if (!info->use_ecc) + info->oob_size += info->ecc_size; } /** @@ -362,10 +359,15 @@ static void pxa3xx_nand_start(struct pxa3xx_nand_info *info) ndcr = info->reg_ndcr; - if (info->use_ecc) + if (info->use_ecc) { ndcr |= NDCR_ECC_EN; - else + if (info->ecc_bch) + nand_writel(info, NDECCCTRL, 0x1); + } else { ndcr &= ~NDCR_ECC_EN; + if (info->ecc_bch) + nand_writel(info, NDECCCTRL, 0x0); + } if (info->use_dma) ndcr |= NDCR_DMA_EN; @@ -1067,6 +1069,41 @@ static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info) return 0; } +static int pxa_ecc_init(struct pxa3xx_nand_info *info, + struct nand_ecc_ctrl *ecc, + int strength, int page_size) +{ + /* + * We don't use strength here as the PXA variant + * is used with non-ONFI compliant devices. + */ + if (page_size == 2048) { + info->spare_size = 40; + info->ecc_size = 24; + ecc->mode = NAND_ECC_HW; + ecc->size = 512; + ecc->strength = 1; + return 1; + + } else if (page_size == 512) { + info->spare_size = 8; + info->ecc_size = 8; + ecc->mode = NAND_ECC_HW; + ecc->size = 512; + ecc->strength = 1; + return 1; + } + return 0; +} + +static int armada370_ecc_init(struct pxa3xx_nand_info *info, + struct nand_ecc_ctrl *ecc, + int strength, int page_size) +{ + /* Unimplemented yet */ + return 0; +} + static int pxa3xx_nand_scan(struct mtd_info *mtd) { struct pxa3xx_nand_host *host = mtd->priv; @@ -1137,13 +1174,13 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) pxa3xx_flash_ids[1].name = NULL; def = pxa3xx_flash_ids; KEEP_CONFIG: - chip->ecc.mode = NAND_ECC_HW; - chip->ecc.size = info->fifo_size; - chip->ecc.strength = 1; - if (info->reg_ndcr & NDCR_DWIDTH_M) chip->options |= NAND_BUSWIDTH_16; + /* Device detection must be done with ECC disabled */ + if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) + nand_writel(info, NDECCCTRL, 0x0); + if (nand_scan_ident(mtd, 1, def)) return -ENODEV; @@ -1158,6 +1195,21 @@ KEEP_CONFIG: chip->bbt_md = &bbt_mirror_descr; } + if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) + ret = armada370_ecc_init(info, &chip->ecc, + chip->ecc_strength_ds, + mtd->writesize); + else + ret = pxa_ecc_init(info, &chip->ecc, + chip->ecc_strength_ds, + mtd->writesize); + if (!ret) { + dev_err(&info->pdev->dev, + "ECC strength %d at page size %d is not supported\n", + chip->ecc_strength_ds, mtd->writesize); + return -ENODEV; + } + /* calculate addressing information */ if (mtd->writesize >= 2048) host->col_addr_cycles = 2; |