diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/regulator/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/stm32-booster.c | 132 |
3 files changed, 144 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 0e7d425ba9b1..1e590ecf1a9d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -839,6 +839,17 @@ config REGULATOR_SLG51000 The SLG51000 is seven compact and customizable low dropout regulators. +config REGULATOR_STM32_BOOSTER + tristate "STMicroelectronics STM32 BOOSTER" + depends on ARCH_STM32 || COMPILE_TEST + help + This driver supports internal booster (3V3) embedded in some + STMicroelectronics STM32 chips. It can be used to supply ADC analog + input switches when vdda supply is below 2.7V. + + This driver can also be built as a module. If so, the module + will be called stm32-booster. + config REGULATOR_STM32_VREFBUF tristate "STMicroelectronics STM32 VREFBUF" depends on ARCH_STM32 || COMPILE_TEST diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index c15b0b613766..eef73b5a35a4 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -105,6 +105,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o obj-$(CONFIG_REGULATOR_SLG51000) += slg51000-regulator.o +obj-$(CONFIG_REGULATOR_STM32_BOOSTER) += stm32-booster.o obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o diff --git a/drivers/regulator/stm32-booster.c b/drivers/regulator/stm32-booster.c new file mode 100644 index 000000000000..2a897666c650 --- /dev/null +++ b/drivers/regulator/stm32-booster.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2019 +// Author(s): Fabrice Gasnier <fabrice.gasnier@st.com>. + +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> + +/* STM32H7 SYSCFG register */ +#define STM32H7_SYSCFG_PMCR 0x04 +#define STM32H7_SYSCFG_BOOSTE_MASK BIT(8) + +/* STM32MP1 SYSCFG has set and clear registers */ +#define STM32MP1_SYSCFG_PMCSETR 0x04 +#define STM32MP1_SYSCFG_PMCCLRR 0x44 +#define STM32MP1_SYSCFG_EN_BOOSTER_MASK BIT(8) + +static const struct regulator_ops stm32h7_booster_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc stm32h7_booster_desc = { + .name = "booster", + .supply_name = "vdda", + .n_voltages = 1, + .type = REGULATOR_VOLTAGE, + .min_uV = 3300000, + .fixed_uV = 3300000, + .ramp_delay = 66000, /* up to 50us to stabilize */ + .ops = &stm32h7_booster_ops, + .enable_reg = STM32H7_SYSCFG_PMCR, + .enable_mask = STM32H7_SYSCFG_BOOSTE_MASK, + .owner = THIS_MODULE, +}; + +static int stm32mp1_booster_enable(struct regulator_dev *rdev) +{ + return regmap_write(rdev->regmap, STM32MP1_SYSCFG_PMCSETR, + STM32MP1_SYSCFG_EN_BOOSTER_MASK); +} + +static int stm32mp1_booster_disable(struct regulator_dev *rdev) +{ + return regmap_write(rdev->regmap, STM32MP1_SYSCFG_PMCCLRR, + STM32MP1_SYSCFG_EN_BOOSTER_MASK); +} + +static const struct regulator_ops stm32mp1_booster_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = stm32mp1_booster_enable, + .disable = stm32mp1_booster_disable, + .is_enabled = regulator_is_enabled_regmap, +}; + +static const struct regulator_desc stm32mp1_booster_desc = { + .name = "booster", + .supply_name = "vdda", + .n_voltages = 1, + .type = REGULATOR_VOLTAGE, + .min_uV = 3300000, + .fixed_uV = 3300000, + .ramp_delay = 66000, + .ops = &stm32mp1_booster_ops, + .enable_reg = STM32MP1_SYSCFG_PMCSETR, + .enable_mask = STM32MP1_SYSCFG_EN_BOOSTER_MASK, + .owner = THIS_MODULE, +}; + +static int stm32_booster_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = pdev->dev.of_node; + struct regulator_config config = { }; + const struct regulator_desc *desc; + struct regulator_dev *rdev; + struct regmap *regmap; + int ret; + + regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + desc = (const struct regulator_desc *) + of_match_device(dev->driver->of_match_table, dev)->data; + + config.regmap = regmap; + config.dev = dev; + config.of_node = np; + config.init_data = of_get_regulator_init_data(dev, np, desc); + + rdev = devm_regulator_register(dev, desc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(dev, "register failed with error %d\n", ret); + return ret; + } + + return 0; +} + +static const struct of_device_id stm32_booster_of_match[] = { + { + .compatible = "st,stm32h7-booster", + .data = (void *)&stm32h7_booster_desc + }, { + .compatible = "st,stm32mp1-booster", + .data = (void *)&stm32mp1_booster_desc + }, { + }, +}; +MODULE_DEVICE_TABLE(of, stm32_booster_of_match); + +static struct platform_driver stm32_booster_driver = { + .probe = stm32_booster_probe, + .driver = { + .name = "stm32-booster", + .of_match_table = of_match_ptr(stm32_booster_of_match), + }, +}; +module_platform_driver(stm32_booster_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics STM32 booster regulator driver"); +MODULE_ALIAS("platform:stm32-booster"); |