diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mfd/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/mfd/stmpe.c | 68 |
2 files changed, 70 insertions, 1 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 8c5dfdce4326..bba159e8eaa4 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1204,7 +1204,7 @@ config MFD_STMPE Currently supported devices are: - STMPE811: GPIO, Touchscreen + STMPE811: GPIO, Touchscreen, ADC STMPE1601: GPIO, Keypad STMPE1801: GPIO, Keypad STMPE2401: GPIO, Keypad @@ -1217,6 +1217,7 @@ config MFD_STMPE GPIO: stmpe-gpio Keypad: stmpe-keypad Touchscreen: stmpe-ts + ADC: stmpe-adc menu "STMicroelectronics STMPE Interface Drivers" depends on MFD_STMPE diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 566caca4efd8..f582531a8f3e 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -464,6 +464,28 @@ static const struct mfd_cell stmpe_ts_cell = { }; /* + * ADC (STMPE811) + */ + +static struct resource stmpe_adc_resources[] = { + { + .name = "STMPE_TEMP_SENS", + .flags = IORESOURCE_IRQ, + }, + { + .name = "STMPE_ADC", + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct mfd_cell stmpe_adc_cell = { + .name = "stmpe-adc", + .of_compatible = "st,stmpe-adc", + .resources = stmpe_adc_resources, + .num_resources = ARRAY_SIZE(stmpe_adc_resources), +}; + +/* * STMPE811 or STMPE610 */ @@ -497,6 +519,11 @@ static struct stmpe_variant_block stmpe811_blocks[] = { .irq = STMPE811_IRQ_TOUCH_DET, .block = STMPE_BLOCK_TOUCHSCREEN, }, + { + .cell = &stmpe_adc_cell, + .irq = STMPE811_IRQ_TEMP_SENS, + .block = STMPE_BLOCK_ADC, + }, }; static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, @@ -517,6 +544,35 @@ static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks, enable ? 0 : mask); } +int stmpe811_adc_common_init(struct stmpe *stmpe) +{ + int ret; + u8 adc_ctrl1, adc_ctrl1_mask; + + adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) | + STMPE_MOD_12B(stmpe->mod_12b) | + STMPE_REF_SEL(stmpe->ref_sel); + adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) | + STMPE_REF_SEL(0xff); + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1, + adc_ctrl1_mask, adc_ctrl1); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2, + STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq)); + if (ret) { + dev_err(stmpe->dev, "Could not setup ADC\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(stmpe811_adc_common_init); + static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block) { /* 0 for touchscreen, 1 for GPIO */ @@ -1325,6 +1381,7 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) struct device_node *np = ci->dev->of_node; struct stmpe *stmpe; int ret; + u32 val; pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -1342,6 +1399,15 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum) mutex_init(&stmpe->irq_lock); mutex_init(&stmpe->lock); + if (!of_property_read_u32(np, "st,sample-time", &val)) + stmpe->sample_time = val; + if (!of_property_read_u32(np, "st,mod-12b", &val)) + stmpe->mod_12b = val; + if (!of_property_read_u32(np, "st,ref-sel", &val)) + stmpe->ref_sel = val; + if (!of_property_read_u32(np, "st,adc-freq", &val)) + stmpe->adc_freq = val; + stmpe->dev = ci->dev; stmpe->client = ci->client; stmpe->pdata = pdata; @@ -1433,6 +1499,8 @@ int stmpe_remove(struct stmpe *stmpe) if (!IS_ERR(stmpe->vcc)) regulator_disable(stmpe->vcc); + __stmpe_disable(stmpe, STMPE_BLOCK_ADC); + mfd_remove_devices(stmpe->dev); return 0; |