diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/cyttsp4_spi.c | 205 |
3 files changed, 215 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1645e8e4e788..2d70089c1183 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -188,6 +188,15 @@ config TOUCHSCREEN_CYTTSP4_I2C To compile this driver as a module, choose M here: the module will be called cyttsp4_i2c. +config TOUCHSCREEN_CYTTSP4_SPI + tristate "support SPI bus connection" + depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER + help + Say Y here if the touchscreen is connected via SPI bus. + + To compile this driver as a module, choose M here: the + module will be called cyttsp4_spi. + config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 1ef807c7d870..f5216c1bf53e 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o cyttsp_i2c_common.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE) += cyttsp4_core.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C) += cyttsp4_i2c.o cyttsp_i2c_common.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI) += cyttsp4_spi.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o diff --git a/drivers/input/touchscreen/cyttsp4_spi.c b/drivers/input/touchscreen/cyttsp4_spi.c new file mode 100644 index 000000000000..f8f891bead34 --- /dev/null +++ b/drivers/input/touchscreen/cyttsp4_spi.c @@ -0,0 +1,205 @@ +/* + * Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver. + * For use with Cypress Txx4xx parts. + * Supported parts include: + * TMA4XX + * TMA1036 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * Copyright (C) 2013 Cypress Semiconductor + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com> + * + */ + +#include "cyttsp4_core.h" + +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/spi/spi.h> + +#define CY_SPI_WR_OP 0x00 /* r/~w */ +#define CY_SPI_RD_OP 0x01 +#define CY_SPI_BITS_PER_WORD 8 +#define CY_SPI_A8_BIT 0x02 +#define CY_SPI_WR_HEADER_BYTES 2 +#define CY_SPI_RD_HEADER_BYTES 1 +#define CY_SPI_CMD_BYTES 2 +#define CY_SPI_SYNC_BYTE 0 +#define CY_SPI_SYNC_ACK 0x62 /* from TRM *A protocol */ +#define CY_SPI_DATA_SIZE (2 * 256) + +#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE) + +static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf, + u8 op, u8 reg, u8 *buf, int length) +{ + struct spi_device *spi = to_spi_device(dev); + struct spi_message msg; + struct spi_transfer xfer[2]; + u8 *wr_buf = &xfer_buf[0]; + u8 rd_buf[CY_SPI_CMD_BYTES]; + int retval; + int i; + + if (length > CY_SPI_DATA_SIZE) { + dev_err(dev, "%s: length %d is too big.\n", + __func__, length); + return -EINVAL; + } + + memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE); + memset(rd_buf, 0, CY_SPI_CMD_BYTES); + + if (reg > 255) + wr_buf[0] = op + CY_SPI_A8_BIT; + else + wr_buf[0] = op; + if (op == CY_SPI_WR_OP) + wr_buf[1] = reg % 256; + if (op == CY_SPI_WR_OP && length > 0) + memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length); + + memset(xfer, 0, sizeof(xfer)); + spi_message_init(&msg); + + /* + We set both TX and RX buffers because Cypress TTSP + requires full duplex operation. + */ + xfer[0].tx_buf = wr_buf; + xfer[0].rx_buf = rd_buf; + switch (op) { + case CY_SPI_WR_OP: + xfer[0].len = length + CY_SPI_CMD_BYTES; + spi_message_add_tail(&xfer[0], &msg); + break; + + case CY_SPI_RD_OP: + xfer[0].len = CY_SPI_RD_HEADER_BYTES; + spi_message_add_tail(&xfer[0], &msg); + + xfer[1].rx_buf = buf; + xfer[1].len = length; + spi_message_add_tail(&xfer[1], &msg); + break; + + default: + dev_err(dev, "%s: bad operation code=%d\n", __func__, op); + return -EINVAL; + } + + retval = spi_sync(spi, &msg); + if (retval < 0) { + dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n", + __func__, retval, xfer[1].len, op); + + /* + * do not return here since was a bad ACK sequence + * let the following ACK check handle any errors and + * allow silent retries + */ + } + + if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK) { + dev_dbg(dev, "%s: operation %d failed\n", __func__, op); + + for (i = 0; i < CY_SPI_CMD_BYTES; i++) + dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n", + __func__, i, rd_buf[i]); + for (i = 0; i < length; i++) + dev_dbg(dev, "%s: test buf[%d]:0x%02x\n", + __func__, i, buf[i]); + + return -EIO; + } + + return 0; +} + +static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf, + u8 addr, u8 length, void *data) +{ + int rc; + + rc = cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, NULL, 0); + if (rc) + return rc; + else + return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data, + length); +} + +static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf, + u8 addr, u8 length, const void *data) +{ + return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data, + length); +} + +static const struct cyttsp4_bus_ops cyttsp_spi_bus_ops = { + .bustype = BUS_SPI, + .write = cyttsp_spi_write_block_data, + .read = cyttsp_spi_read_block_data, +}; + +static int cyttsp4_spi_probe(struct spi_device *spi) +{ + struct cyttsp4 *ts; + int error; + + /* Set up SPI*/ + spi->bits_per_word = CY_SPI_BITS_PER_WORD; + spi->mode = SPI_MODE_0; + error = spi_setup(spi); + if (error < 0) { + dev_err(&spi->dev, "%s: SPI setup error %d\n", + __func__, error); + return error; + } + + ts = cyttsp4_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq, + CY_SPI_DATA_BUF_SIZE); + + if (IS_ERR(ts)) + return PTR_ERR(ts); + + return 0; +} + +static int cyttsp4_spi_remove(struct spi_device *spi) +{ + struct cyttsp4 *ts = spi_get_drvdata(spi); + cyttsp4_remove(ts); + + return 0; +} + +static struct spi_driver cyttsp4_spi_driver = { + .driver = { + .name = CYTTSP4_SPI_NAME, + .owner = THIS_MODULE, + .pm = &cyttsp4_pm_ops, + }, + .probe = cyttsp4_spi_probe, + .remove = cyttsp4_spi_remove, +}; + +module_spi_driver(cyttsp4_spi_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver"); +MODULE_AUTHOR("Cypress"); +MODULE_ALIAS("spi:cyttsp4"); |