diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/remoteproc/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/remoteproc/omap_remoteproc.c | 166 |
2 files changed, 167 insertions, 11 deletions
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index b52abc2268cc..5f33358eb2f1 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -52,6 +52,18 @@ config OMAP_REMOTEPROC It's safe to say N here if you're not interested in multimedia offloading or just want a bare minimum kernel. +config OMAP_REMOTEPROC_WATCHDOG + bool "OMAP remoteproc watchdog timer" + depends on OMAP_REMOTEPROC + default n + help + Say Y here to enable watchdog timer for remote processors. + + This option controls the watchdog functionality for the remote + processors in OMAP. Dedicated OMAP DMTimers are used by the remote + processors and triggers the timer interrupt upon a watchdog + detection. + config WKUP_M3_RPROC tristate "AMx3xx Wakeup M3 remoteproc support" depends on SOC_AM33XX || SOC_AM43XX diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c index cee6c33869b3..cdb546f7232e 100644 --- a/drivers/remoteproc/omap_remoteproc.c +++ b/drivers/remoteproc/omap_remoteproc.c @@ -24,6 +24,7 @@ #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/dma-mapping.h> +#include <linux/interrupt.h> #include <linux/remoteproc.h> #include <linux/mailbox_client.h> #include <linux/omap-iommu.h> @@ -72,10 +73,12 @@ struct omap_rproc_mem { * struct omap_rproc_timer - data structure for a timer used by a omap rproc * @odt: timer pointer * @timer_ops: OMAP dmtimer ops for @odt timer + * @irq: timer irq */ struct omap_rproc_timer { struct omap_dm_timer *odt; const struct omap_dm_timer_ops *timer_ops; + int irq; }; /** @@ -86,6 +89,7 @@ struct omap_rproc_timer { * @mem: internal memory regions data * @num_mems: number of internal memory regions * @num_timers: number of rproc timer(s) + * @num_wd_timers: number of rproc watchdog timers * @timers: timer(s) info used by rproc * @autosuspend_delay: auto-suspend delay value to be used for runtime pm * @need_resume: if true a resume is needed in the system resume callback @@ -102,6 +106,7 @@ struct omap_rproc { struct omap_rproc_mem *mem; int num_mems; int num_timers; + int num_wd_timers; struct omap_rproc_timer *timers; int autosuspend_delay; bool need_resume; @@ -220,6 +225,79 @@ static inline int omap_rproc_release_timer(struct omap_rproc_timer *timer) } /** + * omap_rproc_get_timer_irq() - get the irq for a timer + * @timer: handle to a OMAP rproc timer + * + * This function is used to get the irq associated with a watchdog timer. The + * function is called by the OMAP remoteproc driver to register a interrupt + * handler to handle watchdog events on the remote processor. + * + * Return: irq id on success, otherwise a failure as returned by DMTimer ops + */ +static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer) +{ + return timer->timer_ops->get_irq(timer->odt); +} + +/** + * omap_rproc_ack_timer_irq() - acknowledge a timer irq + * @timer: handle to a OMAP rproc timer + * + * This function is used to clear the irq associated with a watchdog timer. The + * The function is called by the OMAP remoteproc upon a watchdog event on the + * remote processor to clear the interrupt status of the watchdog timer. + */ +static inline void omap_rproc_ack_timer_irq(struct omap_rproc_timer *timer) +{ + timer->timer_ops->write_status(timer->odt, OMAP_TIMER_INT_OVERFLOW); +} + +/** + * omap_rproc_watchdog_isr() - Watchdog ISR handler for remoteproc device + * @irq: IRQ number associated with a watchdog timer + * @data: IRQ handler data + * + * This ISR routine executes the required necessary low-level code to + * acknowledge a watchdog timer interrupt. There can be multiple watchdog + * timers associated with a rproc (like IPUs which have 2 watchdog timers, + * one per Cortex M3/M4 core), so a lookup has to be performed to identify + * the timer to acknowledge its interrupt. + * + * The function also invokes rproc_report_crash to report the watchdog event + * to the remoteproc driver core, to trigger a recovery. + * + * Return: IRQ_HANDLED on success, otherwise IRQ_NONE + */ +static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data) +{ + struct rproc *rproc = data; + struct omap_rproc *oproc = rproc->priv; + struct device *dev = rproc->dev.parent; + struct omap_rproc_timer *timers = oproc->timers; + struct omap_rproc_timer *wd_timer = NULL; + int num_timers = oproc->num_timers + oproc->num_wd_timers; + int i; + + for (i = oproc->num_timers; i < num_timers; i++) { + if (timers[i].irq > 0 && irq == timers[i].irq) { + wd_timer = &timers[i]; + break; + } + } + + if (!wd_timer) { + dev_err(dev, "invalid timer\n"); + return IRQ_NONE; + } + + omap_rproc_ack_timer_irq(wd_timer); + + rproc_report_crash(rproc, RPROC_WATCHDOG); + + return IRQ_HANDLED; +} + +/** * omap_rproc_enable_timers() - enable the timers for a remoteproc * @rproc: handle of a remote processor * @configure: boolean flag used to acquire and configure the timer handle @@ -242,19 +320,26 @@ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure) struct omap_rproc_timer *timers = oproc->timers; struct device *dev = rproc->dev.parent; struct device_node *np = NULL; + int num_timers = oproc->num_timers + oproc->num_wd_timers; - if (!oproc->num_timers) + if (!num_timers) return 0; if (!configure) goto start_timers; - for (i = 0; i < oproc->num_timers; i++) { - np = of_parse_phandle(dev->of_node, "ti,timers", i); + for (i = 0; i < num_timers; i++) { + if (i < oproc->num_timers) + np = of_parse_phandle(dev->of_node, "ti,timers", i); + else + np = of_parse_phandle(dev->of_node, + "ti,watchdog-timers", + (i - oproc->num_timers)); if (!np) { ret = -ENXIO; dev_err(dev, "device node lookup for timer at index %d failed: %d\n", - i, ret); + i < oproc->num_timers ? i : + i - oproc->num_timers, ret); goto free_timers; } @@ -277,12 +362,14 @@ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure) if (!timer_ops || !timer_ops->request_by_node || !timer_ops->set_source || !timer_ops->set_load || !timer_ops->free || !timer_ops->start || - !timer_ops->stop) { + !timer_ops->stop || !timer_ops->get_irq || + !timer_ops->write_status) { ret = -EINVAL; dev_err(dev, "device does not have required timer ops\n"); goto put_node; } + timers[i].irq = -1; timers[i].timer_ops = timer_ops; ret = omap_rproc_request_timer(dev, np, &timers[i]); if (ret) { @@ -291,10 +378,33 @@ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure) goto put_node; } of_node_put(np); + + if (i >= oproc->num_timers) { + timers[i].irq = omap_rproc_get_timer_irq(&timers[i]); + if (timers[i].irq < 0) { + dev_err(dev, "get_irq for timer %p failed: %d\n", + np, timers[i].irq); + ret = -EBUSY; + goto free_timers; + } + + ret = request_irq(timers[i].irq, + omap_rproc_watchdog_isr, IRQF_SHARED, + "rproc-wdt", rproc); + if (ret) { + dev_err(dev, "error requesting irq for timer %p\n", + np); + omap_rproc_release_timer(&timers[i]); + timers[i].odt = NULL; + timers[i].timer_ops = NULL; + timers[i].irq = -1; + goto free_timers; + } + } } start_timers: - for (i = 0; i < oproc->num_timers; i++) { + for (i = 0; i < num_timers; i++) { ret = omap_rproc_start_timer(&timers[i]); if (ret) { dev_err(dev, "start timer %p failed failed: %d\n", np, @@ -316,9 +426,12 @@ put_node: of_node_put(np); free_timers: while (i--) { + if (i >= oproc->num_timers) + free_irq(timers[i].irq, rproc); omap_rproc_release_timer(&timers[i]); timers[i].odt = NULL; timers[i].timer_ops = NULL; + timers[i].irq = -1; } return ret; @@ -341,16 +454,20 @@ static int omap_rproc_disable_timers(struct rproc *rproc, bool configure) int i; struct omap_rproc *oproc = rproc->priv; struct omap_rproc_timer *timers = oproc->timers; + int num_timers = oproc->num_timers + oproc->num_wd_timers; - if (!oproc->num_timers) + if (!num_timers) return 0; - for (i = 0; i < oproc->num_timers; i++) { + for (i = 0; i < num_timers; i++) { omap_rproc_stop_timer(&timers[i]); if (configure) { + if (i >= oproc->num_timers) + free_irq(timers[i].irq, rproc); omap_rproc_release_timer(&timers[i]); timers[i].odt = NULL; timers[i].timer_ops = NULL; + timers[i].irq = -1; } } @@ -1104,12 +1221,35 @@ static int omap_rproc_of_get_internal_memories(struct platform_device *pdev, return 0; } +#ifdef CONFIG_OMAP_REMOTEPROC_WATCHDOG +static int omap_rproc_count_wdog_timers(struct device *dev) +{ + struct device_node *np = dev->of_node; + int ret; + + ret = of_count_phandle_with_args(np, "ti,watchdog-timers", NULL); + if (ret <= 0) { + dev_dbg(dev, "device does not have watchdog timers, status = %d\n", + ret); + ret = 0; + } + + return ret; +} +#else +static int omap_rproc_count_wdog_timers(struct device *dev) +{ + return 0; +} +#endif + static int omap_rproc_of_get_timers(struct platform_device *pdev, struct rproc *rproc) { struct device_node *np = pdev->dev.of_node; struct omap_rproc *oproc = rproc->priv; struct device *dev = &pdev->dev; + int num_timers; /* * Timer nodes are directly used in client nodes as phandles, so @@ -1122,14 +1262,18 @@ static int omap_rproc_of_get_timers(struct platform_device *pdev, oproc->num_timers = 0; } - if (oproc->num_timers) { - oproc->timers = devm_kcalloc(dev, oproc->num_timers, + oproc->num_wd_timers = omap_rproc_count_wdog_timers(dev); + + num_timers = oproc->num_timers + oproc->num_wd_timers; + if (num_timers) { + oproc->timers = devm_kcalloc(dev, num_timers, sizeof(*oproc->timers), GFP_KERNEL); if (!oproc->timers) return -ENOMEM; - dev_dbg(dev, "device has %d tick timers\n", oproc->num_timers); + dev_dbg(dev, "device has %d tick timers and %d watchdog timers\n", + oproc->num_timers, oproc->num_wd_timers); } return 0; |