diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/gpio/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpio-pcf857x.c | 121 |
2 files changed, 28 insertions, 94 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 09bc70b3875b..249845a47624 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -604,6 +604,7 @@ config GPIO_PCA953X_IRQ config GPIO_PCF857X tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders" depends on I2C + select GPIOLIB_IRQCHIP select IRQ_DOMAIN help Say yes here to provide access to most "quasi-bidirectional" I2C diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c index 236708ad0a5b..126c93732101 100644 --- a/drivers/gpio/gpio-pcf857x.c +++ b/drivers/gpio/gpio-pcf857x.c @@ -88,11 +88,9 @@ struct pcf857x { struct gpio_chip chip; struct i2c_client *client; struct mutex lock; /* protect 'out' */ - struct irq_domain *irq_domain; /* for irq demux */ spinlock_t slock; /* protect irq demux */ unsigned out; /* software latch */ unsigned status; /* current status */ - unsigned irq_mapped; /* mapped gpio irqs */ int (*write)(struct i2c_client *client, unsigned data); int (*read)(struct i2c_client *client); @@ -182,18 +180,6 @@ static void pcf857x_set(struct gpio_chip *chip, unsigned offset, int value) /*-------------------------------------------------------------------------*/ -static int pcf857x_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct pcf857x *gpio = container_of(chip, struct pcf857x, chip); - int ret; - - ret = irq_create_mapping(gpio->irq_domain, offset); - if (ret > 0) - gpio->irq_mapped |= (1 << offset); - - return ret; -} - static irqreturn_t pcf857x_irq(int irq, void *data) { struct pcf857x *gpio = data; @@ -208,9 +194,9 @@ static irqreturn_t pcf857x_irq(int irq, void *data) * interrupt source, just to avoid bad irqs */ - change = ((gpio->status ^ status) & gpio->irq_mapped); + change = (gpio->status ^ status); for_each_set_bit(i, &change, gpio->chip.ngpio) - generic_handle_irq(irq_find_mapping(gpio->irq_domain, i)); + handle_nested_irq(irq_find_mapping(gpio->chip.irqdomain, i)); gpio->status = status; spin_unlock_irqrestore(&gpio->slock, flags); @@ -218,66 +204,6 @@ static irqreturn_t pcf857x_irq(int irq, void *data) return IRQ_HANDLED; } -static int pcf857x_irq_domain_map(struct irq_domain *domain, unsigned int irq, - irq_hw_number_t hw) -{ - struct pcf857x *gpio = domain->host_data; - - irq_set_chip_and_handler(irq, - &dummy_irq_chip, - handle_level_irq); -#ifdef CONFIG_ARM - set_irq_flags(irq, IRQF_VALID); -#else - irq_set_noprobe(irq); -#endif - gpio->irq_mapped |= (1 << hw); - - return 0; -} - -static struct irq_domain_ops pcf857x_irq_domain_ops = { - .map = pcf857x_irq_domain_map, -}; - -static void pcf857x_irq_domain_cleanup(struct pcf857x *gpio) -{ - if (gpio->irq_domain) - irq_domain_remove(gpio->irq_domain); - -} - -static int pcf857x_irq_domain_init(struct pcf857x *gpio, - struct i2c_client *client) -{ - int status; - - gpio->irq_domain = irq_domain_add_linear(client->dev.of_node, - gpio->chip.ngpio, - &pcf857x_irq_domain_ops, - gpio); - if (!gpio->irq_domain) - goto fail; - - /* enable real irq */ - status = devm_request_threaded_irq(&client->dev, client->irq, - NULL, pcf857x_irq, IRQF_ONESHOT | - IRQF_TRIGGER_FALLING | IRQF_SHARED, - dev_name(&client->dev), gpio); - - if (status) - goto fail; - - /* enable gpio_to_irq() */ - gpio->chip.to_irq = pcf857x_to_irq; - - return 0; - -fail: - pcf857x_irq_domain_cleanup(gpio); - return -EINVAL; -} - /*-------------------------------------------------------------------------*/ static int pcf857x_probe(struct i2c_client *client, @@ -314,15 +240,6 @@ static int pcf857x_probe(struct i2c_client *client, gpio->chip.direction_output = pcf857x_output; gpio->chip.ngpio = id->driver_data; - /* enable gpio_to_irq() if platform has settings */ - if (client->irq) { - status = pcf857x_irq_domain_init(gpio, client); - if (status < 0) { - dev_err(&client->dev, "irq_domain init failed\n"); - goto fail_irq_domain; - } - } - /* NOTE: the OnSemi jlc1562b is also largely compatible with * these parts, notably for output. It has a low-resolution * DAC instead of pin change IRQs; and its inputs can be the @@ -398,6 +315,26 @@ static int pcf857x_probe(struct i2c_client *client, if (status < 0) goto fail; + /* Enable irqchip if we have an interrupt */ + if (client->irq) { + status = gpiochip_irqchip_add(&gpio->chip, &dummy_irq_chip, 0, + handle_level_irq, IRQ_TYPE_NONE); + if (status) { + dev_err(&client->dev, "cannot add irqchip\n"); + goto fail_irq; + } + + status = devm_request_threaded_irq(&client->dev, client->irq, + NULL, pcf857x_irq, IRQF_ONESHOT | + IRQF_TRIGGER_FALLING | IRQF_SHARED, + dev_name(&client->dev), gpio); + if (status) + goto fail_irq; + + gpiochip_set_chained_irqchip(&gpio->chip, &dummy_irq_chip, + client->irq, NULL); + } + /* Let platform code set up the GPIOs and their users. * Now is the first time anyone could use them. */ @@ -413,13 +350,12 @@ static int pcf857x_probe(struct i2c_client *client, return 0; -fail: - if (client->irq) - pcf857x_irq_domain_cleanup(gpio); +fail_irq: + gpiochip_remove(&gpio->chip); -fail_irq_domain: - dev_dbg(&client->dev, "probe error %d for '%s'\n", - status, client->name); +fail: + dev_dbg(&client->dev, "probe error %d for '%s'\n", status, + client->name); return status; } @@ -441,9 +377,6 @@ static int pcf857x_remove(struct i2c_client *client) } } - if (client->irq) - pcf857x_irq_domain_cleanup(gpio); - gpiochip_remove(&gpio->chip); return status; } |