676 files changed, 6225 insertions, 25069 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index e3ced91b1784..d05d81b19b50 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -53,8 +53,8 @@ obj-y				+= gpu/
 obj-$(CONFIG_CONNECTOR)		+= connector/
 
 # i810fb and intelfb depend on char/agp/
-obj-$(CONFIG_FB_I810)           += video/i810/
-obj-$(CONFIG_FB_INTEL)          += video/intelfb/
+obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
 
 obj-$(CONFIG_PARPORT)		+= parport/
 obj-y				+= base/ block/ misc/ mfd/ nfc/
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 0dd65281cc65..20da3ad1696b 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -614,39 +614,6 @@ void device_remove_bin_file(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(device_remove_bin_file);
 
-/**
- * device_schedule_callback_owner - helper to schedule a callback for a device
- * @dev: device.
- * @func: callback function to invoke later.
- * @owner: module owning the callback routine
- *
- * Attribute methods must not unregister themselves or their parent device
- * (which would amount to the same thing).  Attempts to do so will deadlock,
- * since unregistration is mutually exclusive with driver callbacks.
- *
- * Instead methods can call this routine, which will attempt to allocate
- * and schedule a workqueue request to call back @func with @dev as its
- * argument in the workqueue's process context.  @dev will be pinned until
- * @func returns.
- *
- * This routine is usually called via the inline device_schedule_callback(),
- * which automatically sets @owner to THIS_MODULE.
- *
- * Returns 0 if the request was submitted, -ENOMEM if storage could not
- * be allocated, -ENODEV if a reference to @owner isn't available.
- *
- * NOTE: This routine won't work if CONFIG_SYSFS isn't set!  It uses an
- * underlying sysfs routine (since it is intended for use by attribute
- * methods), and if sysfs isn't available you'll get nothing but -ENOSYS.
- */
-int device_schedule_callback_owner(struct device *dev,
-		void (*func)(struct device *), struct module *owner)
-{
-	return sysfs_schedule_callback(&dev->kobj,
-			(void (*)(void *)) func, dev, owner);
-}
-EXPORT_SYMBOL_GPL(device_schedule_callback_owner);
-
 static void klist_children_get(struct klist_node *n)
 {
 	struct device_private *p = to_device_private_parent(n);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 06051767393f..8986b9f22781 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -187,8 +187,8 @@ static void driver_bound(struct device *dev)
 		return;
 	}
 
-	pr_debug("driver: '%s': %s: bound to device '%s'\n", dev_name(dev),
-		 __func__, dev->driver->name);
+	pr_debug("driver: '%s': %s: bound to device '%s'\n", dev->driver->name,
+		 __func__, dev_name(dev));
 
 	klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices);
 
diff --git a/drivers/base/topology.c b/drivers/base/topology.c
index bbcbd3c43926..be7c1fb7c0c9 100644
--- a/drivers/base/topology.c
+++ b/drivers/base/topology.c
@@ -39,8 +39,7 @@
 static ssize_t show_##name(struct device *dev,			\
 		struct device_attribute *attr, char *buf)	\
 {								\
-	unsigned int cpu = dev->id;				\
-	return sprintf(buf, "%d\n", topology_##name(cpu));	\
+	return sprintf(buf, "%d\n", topology_##name(dev->id));	\
 }
 
 #if defined(topology_thread_cpumask) || defined(topology_core_cpumask) || \
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index fbae63e3d304..6e9f74a5c095 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -40,7 +40,7 @@ config SGI_MBCS
 source "drivers/tty/serial/Kconfig"
 
 config TTY_PRINTK
-	bool "TTY driver to output user messages via printk"
+	tristate "TTY driver to output user messages via printk"
 	depends on EXPERT && TTY
 	default n
 	---help---
diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
index 0baa8fab4ea7..db1c9b7adaa6 100644
--- a/drivers/char/ipmi/Kconfig
+++ b/drivers/char/ipmi/Kconfig
@@ -50,6 +50,18 @@ config IPMI_SI
 	 Currently, only KCS and SMIC are supported.  If
 	 you are using IPMI, you should probably say "y" here.
 
+config IPMI_SI_PROBE_DEFAULTS
+       bool 'Probe for all possible IPMI system interfaces by default'
+       default n
+       depends on IPMI_SI
+       help
+	 Modern systems will usually expose IPMI interfaces via a discoverable
+	 firmware mechanism such as ACPI or DMI. Older systems do not, and so
+	 the driver is forced to probe hardware manually. This may cause boot
+	 delays. Say "n" here to disable this manual probing. IPMI will then
+	 only be available on older systems if the "ipmi_si_intf.trydefaults=1"
+	 boot argument is passed.
+
 config IPMI_WATCHDOG
        tristate 'IPMI Watchdog Timer'
        help
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index f5e4cd7617f6..61e71616689b 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -352,7 +352,7 @@ static inline void write_all_bytes(struct si_sm_data *bt)
 
 static inline int read_all_bytes(struct si_sm_data *bt)
 {
-	unsigned char i;
+	unsigned int i;
 
 	/*
 	 * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index 6a4bdc18955a..8c25f596808a 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -251,8 +251,9 @@ static inline int check_obf(struct si_sm_data *kcs, unsigned char status,
 	if (!GET_STATUS_OBF(status)) {
 		kcs->obf_timeout -= time;
 		if (kcs->obf_timeout < 0) {
-		    start_error_recovery(kcs, "OBF not ready in time");
-		    return 1;
+			kcs->obf_timeout = OBF_RETRY_TIMEOUT;
+			start_error_recovery(kcs, "OBF not ready in time");
+			return 1;
 		}
 		return 0;
 	}
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index ec4e10fcf1a5..e6db9381b2c7 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -55,6 +55,7 @@ static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void);
 static int ipmi_init_msghandler(void);
 static void smi_recv_tasklet(unsigned long);
 static void handle_new_recv_msgs(ipmi_smi_t intf);
+static void need_waiter(ipmi_smi_t intf);
 
 static int initialized;
 
@@ -73,14 +74,28 @@ static struct proc_dir_entry *proc_ipmi_root;
  */
 #define MAX_MSG_TIMEOUT		60000
 
+/* Call every ~1000 ms. */
+#define IPMI_TIMEOUT_TIME	1000
+
+/* How many jiffies does it take to get to the timeout time. */
+#define IPMI_TIMEOUT_JIFFIES	((IPMI_TIMEOUT_TIME * HZ) / 1000)
+
+/*
+ * Request events from the queue every second (this is the number of
+ * IPMI_TIMEOUT_TIMES between event requests).  Hopefully, in the
+ * future, IPMI will add a way to know immediately if an event is in
+ * the queue and this silliness can go away.
+ */
+#define IPMI_REQUEST_EV_TIME	(1000 / (IPMI_TIMEOUT_TIME))
+
 /*
  * The main "user" data structure.
  */
 struct ipmi_user {
 	struct list_head link;
 
-	/* Set to "0" when the user is destroyed. */
-	int valid;
+	/* Set to false when the user is destroyed. */
+	bool valid;
 
 	struct kref refcount;
 
@@ -92,7 +107,7 @@ struct ipmi_user {
 	ipmi_smi_t intf;
 
 	/* Does this interface receive IPMI events? */
-	int gets_events;
+	bool gets_events;
 };
 
 struct cmd_rcvr {
@@ -383,6 +398,9 @@ struct ipmi_smi {
 	unsigned int     waiting_events_count; /* How many events in queue? */
 	char             delivering_events;
 	char             event_msg_printed;
+	atomic_t         event_waiters;
+	unsigned int     ticks_to_req_ev;
+	int              last_needs_timer;
 
 	/*
 	 * The event receiver for my BMC, only really used at panic
@@ -395,7 +413,7 @@ struct ipmi_smi {
 
 	/* For handling of maintenance mode. */
 	int maintenance_mode;
-	int maintenance_mode_enable;
+	bool maintenance_mode_enable;
 	int auto_maintenance_timeout;
 	spinlock_t maintenance_mode_lock; /* Used in a timer... */
 
@@ -451,7 +469,6 @@ static DEFINE_MUTEX(ipmi_interfaces_mutex);
 static LIST_HEAD(smi_watchers);
 static DEFINE_MUTEX(smi_watchers_mutex);
 
-
 #define ipmi_inc_stat(intf, stat) \
 	atomic_inc(&(intf)->stats[IPMI_STAT_ ## stat])
 #define ipmi_get_stat(intf, stat) \
@@ -772,6 +789,7 @@ static int intf_next_seq(ipmi_smi_t           intf,
 		*seq = i;
 		*seqid = intf->seq_table[i].seqid;
 		intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ;
+		need_waiter(intf);
 	} else {
 		rv = -EAGAIN;
 	}
@@ -941,7 +959,7 @@ int ipmi_create_user(unsigned int          if_num,
 	new_user->handler = handler;
 	new_user->handler_data = handler_data;
 	new_user->intf = intf;
-	new_user->gets_events = 0;
+	new_user->gets_events = false;
 
 	if (!try_module_get(intf->handlers->owner)) {
 		rv = -ENODEV;
@@ -962,10 +980,15 @@ int ipmi_create_user(unsigned int          if_num,
 	 */
 	mutex_unlock(&ipmi_interfaces_mutex);
 
-	new_user->valid = 1;
+	new_user->valid = true;
 	spin_lock_irqsave(&intf->seq_lock, flags);
 	list_add_rcu(&new_user->link, &intf->users);
 	spin_unlock_irqrestore(&intf->seq_lock, flags);
+	if (handler->ipmi_watchdog_pretimeout) {
+		/* User wants pretimeouts, so make sure to watch for them. */
+		if (atomic_inc_return(&intf->event_waiters) == 1)
+			need_waiter(intf);
+	}
 	*user = new_user;
 	return 0;
 
@@ -1019,7 +1042,13 @@ int ipmi_destroy_user(ipmi_user_t user)
 	struct cmd_rcvr  *rcvr;
 	struct cmd_rcvr  *rcvrs = NULL;
 
-	user->valid = 0;
+	user->valid = false;
+
+	if (user->handler->ipmi_watchdog_pretimeout)
+		atomic_dec(&intf->event_waiters);
+
+	if (user->gets_events)
+		atomic_dec(&intf->event_waiters);
 
 	/* Remove the user from the interface's sequence table. */
 	spin_lock_irqsave(&intf->seq_lock, flags);
@@ -1155,25 +1184,23 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode)
 	if (intf->maintenance_mode != mode) {
 		switch (mode) {
 		case IPMI_MAINTENANCE_MODE_AUTO:
-			intf->maintenance_mode = mode;
 			intf->maintenance_mode_enable
 				= (intf->auto_maintenance_timeout > 0);
 			break;
 
 		case IPMI_MAINTENANCE_MODE_OFF:
-			intf->maintenance_mode = mode;
-			intf->maintenance_mode_enable = 0;
+			intf->maintenance_mode_enable = false;
 			break;
 
 		case IPMI_MAINTENANCE_MODE_ON:
-			intf->maintenance_mode = mode;
-			intf->maintenance_mode_enable = 1;
+			intf->maintenance_mode_enable = true;
 			break;
 
 		default:
 			rv = -EINVAL;
 			goto out_unlock;
 		}
+		intf->maintenance_mode = mode;
 
 		maintenance_mode_update(intf);
 	}
@@ -1184,7 +1211,7 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode)
 }
 EXPORT_SYMBOL(ipmi_set_maintenance_mode);
 
-int ipmi_set_gets_events(ipmi_user_t user, int val)
+int ipmi_set_gets_events(ipmi_user_t user, bool val)
 {
 	unsigned long        flags;
 	ipmi_smi_t           intf = user->intf;
@@ -1194,8 +1221,18 @@ int ipmi_set_gets_events(ipmi_user_t user, int val)
 	INIT_LIST_HEAD(&msgs);
 
 	spin_lock_irqsave(&intf->events_lock, flags);
+	if (user->gets_events == val)
+		goto out;
+
 	user->gets_events = val;
 
+	if (val) {
+		if (atomic_inc_return(&intf->event_waiters) == 1)
+			need_waiter(intf);
+	} else {
+		atomic_dec(&intf->event_waiters);
+	}
+
 	if (intf->delivering_events)
 		/*
 		 * Another thread is delivering events for this, so
@@ -1289,6 +1326,9 @@ int ipmi_register_for_cmd(ipmi_user_t   user,
 		goto out_unlock;
 	}
 
+	if (atomic_inc_return(&intf->event_waiters) == 1)
+		need_waiter(intf);
+
 	list_add_rcu(&rcvr->link, &intf->cmd_rcvrs);
 
  out_unlock:
@@ -1330,6 +1370,7 @@ int ipmi_unregister_for_cmd(ipmi_user_t   user,
 	mutex_unlock(&intf->cmd_rcvrs_mutex);
 	synchronize_rcu();
 	while (rcvrs) {
+		atomic_dec(&intf->event_waiters);
 		rcvr = rcvrs;
 		rcvrs = rcvr->next;
 		kfree(rcvr);
@@ -1535,7 +1576,7 @@ static int i_ipmi_request(ipmi_user_t          user,
 				= IPMI_MAINTENANCE_MODE_TIMEOUT;
 			if (!intf->maintenance_mode
 			    && !intf->maintenance_mode_enable) {
-				intf->maintenance_mode_enable = 1;
+				intf->maintenance_mode_enable = true;
 				maintenance_mode_update(intf);
 			}
 			spin_unlock_irqrestore(&intf->maintenance_mode_lock,
@@ -2876,6 +2917,8 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
 		     (unsigned long) intf);
 	atomic_set(&intf->watchdog_pretimeouts_to_deliver, 0);
 	spin_lock_init(&intf->events_lock);
+	atomic_set(&intf->event_waiters, 0);
+	intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
 	INIT_LIST_HEAD(&intf->waiting_events);
 	intf->waiting_events_count = 0;
 	mutex_init(&intf->cmd_rcvrs_mutex);
@@ -3965,7 +4008,8 @@ smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg,
 
 static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 			      struct list_head *timeouts, long timeout_period,
-			      int slot, unsigned long *flags)
+			      int slot, unsigned long *flags,
+			      unsigned int *waiting_msgs)
 {
 	struct ipmi_recv_msg     *msg;
 	struct ipmi_smi_handlers *handlers;
@@ -3977,8 +4021,10 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 		return;
 
 	ent->timeout -= timeout_period;
-	if (ent->timeout > 0)
+	if (ent->timeout > 0) {
+		(*waiting_msgs)++;
 		return;
+	}
 
 	if (ent->retries_left == 0) {
 		/* The message has used all its retries. */
@@ -3995,6 +4041,8 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 		struct ipmi_smi_msg *smi_msg;
 		/* More retries, send again. */
 
+		(*waiting_msgs)++;
+
 		/*
 		 * Start with the max timer, set to normal timer after
 		 * the message is sent.
@@ -4040,117 +4088,118 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 	}
 }
 
-static void ipmi_timeout_handler(long timeout_period)
+static unsigned int ipmi_timeout_handler(ipmi_smi_t intf, long timeout_period)
 {
-	ipmi_smi_t           intf;
 	struct list_head     timeouts;
 	struct ipmi_recv_msg *msg, *msg2;
 	unsigned long        flags;
 	int                  i;
+	unsigned int         waiting_msgs = 0;
 
-	rcu_read_lock();
-	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
-		tasklet_schedule(&intf->recv_tasklet);
-
-		/*
-		 * Go through the seq table and find any messages that
-		 * have timed out, putting them in the timeouts
-		 * list.
-		 */
-		INIT_LIST_HEAD(&timeouts);
-		spin_lock_irqsave(&intf->seq_lock, flags);
-		for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++)
-			check_msg_timeout(intf, &(intf->seq_table[i]),
-					  &timeouts, timeout_period, i,
-					  &flags);
-		spin_unlock_irqrestore(&intf->seq_lock, flags);
+	/*
+	 * Go through the seq table and find any messages that
+	 * have timed out, putting them in the timeouts
+	 * list.
+	 */
+	INIT_LIST_HEAD(&timeouts);
+	spin_lock_irqsave(&intf->seq_lock, flags);
+	for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++)
+		check_msg_timeout(intf, &(intf->seq_table[i]),
+				  &timeouts, timeout_period, i,
+				  &flags, &waiting_msgs);
+	spin_unlock_irqrestore(&intf->seq_lock, flags);
 
-		list_for_each_entry_safe(msg, msg2, &timeouts, link)
-			deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE);
+	list_for_each_entry_safe(msg, msg2, &timeouts, link)
+		deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE);
 
-		/*
-		 * Maintenance mode handling.  Check the timeout
-		 * optimistically before we claim the lock.  It may
-		 * mean a timeout gets missed occasionally, but that
-		 * only means the timeout gets extended by one period
-		 * in that case.  No big deal, and it avoids the lock
-		 * most of the time.
-		 */
+	/*
+	 * Maintenance mode handling.  Check the timeout
+	 * optimistically before we claim the lock.  It may
+	 * mean a timeout gets missed occasionally, but that
+	 * only means the timeout gets extended by one period
+	 * in that case.  No big deal, and it avoids the lock
+	 * most of the time.
+	 */
+	if (intf->auto_maintenance_timeout > 0) {
+		spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
 		if (intf->auto_maintenance_timeout > 0) {
-			spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
-			if (intf->auto_maintenance_timeout > 0) {
-				intf->auto_maintenance_timeout
-					-= timeout_period;
-				if (!intf->maintenance_mode
-				    && (intf->auto_maintenance_timeout <= 0)) {
-					intf->maintenance_mode_enable = 0;
-					maintenance_mode_update(intf);
-				}
+			intf->auto_maintenance_timeout
+				-= timeout_period;
+			if (!intf->maintenance_mode
+			    && (intf->auto_maintenance_timeout <= 0)) {
+				intf->maintenance_mode_enable = false;
+				maintenance_mode_update(intf);
 			}
-			spin_unlock_irqrestore(&intf->maintenance_mode_lock,
-					       flags);
 		}
+		spin_unlock_irqrestore(&intf->maintenance_mode_lock,
+				       flags);
 	}
-	rcu_read_unlock();
+
+	tasklet_schedule(&intf->recv_tasklet);
+
+	return waiting_msgs;
 }
 
-static void ipmi_request_event(void)
+static void ipmi_request_event(ipmi_smi_t intf)
 {
-	ipmi_smi_t               intf;
 	struct ipmi_smi_handlers *handlers;
 
-	rcu_read_lock();
-	/*
-	 * Called from the timer, no need to check if handlers is
-	 * valid.
-	 */
-	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
-		/* No event requests when in maintenance mode. */
-		if (intf->maintenance_mode_enable)
-			continue;
+	/* No event requests when in maintenance mode. */
+	if (intf->maintenance_mode_enable)
+		return;
 
-		handlers = intf->handlers;
-		if (handlers)
-			handlers->request_events(intf->send_info);
-	}
-	rcu_read_unlock();
+	handlers = intf->handlers;
+	if (handlers)
+		handlers->request_events(intf->send_info);
 }
 
 static struct timer_list ipmi_timer;
 
-/* Call every ~1000 ms. */
-#define IPMI_TIMEOUT_TIME	1000
-
-/* How many jiffies does it take to get to the timeout time. */
-#define IPMI_TIMEOUT_JIFFIES	((IPMI_TIMEOUT_TIME * HZ) / 1000)
-
-/*
- * Request events from the queue every second (this is the number of
- * IPMI_TIMEOUT_TIMES between event requests).  Hopefully, in the
- * future, IPMI will add a way to know immediately if an event is in
- * the queue and this silliness can go away.
- */
-#define IPMI_REQUEST_EV_TIME	(1000 / (IPMI_TIMEOUT_TIME))
-
 static atomic_t stop_operation;
-static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
 
 static void ipmi_timeout(unsigned long data)
 {
+	ipmi_smi_t intf;
+	int nt = 0;
+
 	if (atomic_read(&stop_operation))
 		return;
 
-	ticks_to_req_ev--;
-	if (ticks_to_req_ev == 0) {
-		ipmi_request_event();
-		ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
-	}
+	rcu_read_lock();
+	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
+		int lnt = 0;
+
+		if (atomic_read(&intf->event_waiters)) {
+			intf->ticks_to_req_ev--;
+			if (intf->ticks_to_req_ev == 0) {
+				ipmi_request_event(intf);
+				intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
+			}
+			lnt++;
+		}
 
-	ipmi_timeout_handler(IPMI_TIMEOUT_TIME);
+		lnt += ipmi_timeout_handler(intf, IPMI_TIMEOUT_TIME);
 
-	mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
+		lnt = !!lnt;
+		if (lnt != intf->last_needs_timer &&
+					intf->handlers->set_need_watch)
+			intf->handlers->set_need_watch(intf->send_info, lnt);
+		intf->last_needs_timer = lnt;
+
+		nt += lnt;
+	}
+	rcu_read_unlock();
+
+	if (nt)
+		mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
 }
 
+static void need_waiter(ipmi_smi_t intf)
+{
+	/* Racy, but worst case we start the timer twice. */
+	if (!timer_pending(&ipmi_timer))
+		mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
+}
 
 static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0);
 static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index b7efd3c1a882..1c4bb4f6ce93 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -217,7 +217,7 @@ struct smi_info {
 	unsigned char       msg_flags;
 
 	/* Does the BMC have an event buffer? */
-	char		    has_event_buffer;
+	bool		    has_event_buffer;
 
 	/*
 	 * If set to true, this will request events the next time the
@@ -230,7 +230,7 @@ struct smi_info {
 	 * call.  Generally used after a panic to make sure stuff goes
 	 * out.
 	 */
-	int                 run_to_completion;
+	bool                run_to_completion;
 
 	/* The I/O port of an SI interface. */
 	int                 port;
@@ -248,19 +248,25 @@ struct smi_info {
 	/* The timer for this si. */
 	struct timer_list   si_timer;
 
+	/* This flag is set, if the timer is running (timer_pending() isn't enough) */
+	bool		    timer_running;
+
 	/* The time (in jiffies) the last timeout occurred at. */
 	unsigned long       last_timeout_jiffies;
 
 	/* Used to gracefully stop the timer without race conditions. */
 	atomic_t            stop_operation;
 
+	/* Are we waiting for the events, pretimeouts, received msgs? */
+	atomic_t            need_watch;
+
 	/*
 	 * The driver will disable interrupts when it gets into a
 	 * situation where it cannot handle messages due to lack of
 	 * memory.  Once that situation clears up, it will re-enable
 	 * interrupts.
 	 */
-	int interrupt_disabled;
+	bool interrupt_disabled;
 
 	/* From the get device id response... */
 	struct ipmi_device_id device_id;
@@ -273,7 +279,7 @@ struct smi_info {
 	 * True if we allocated the device, false if it came from
 	 * someplace else (like PCI).
 	 */
-	int dev_registered;
+	bool dev_registered;
 
 	/* Slave address, could be reported from DMI. */
 	unsigned char slave_addr;
@@ -297,19 +303,19 @@ struct smi_info {
 static int force_kipmid[SI_MAX_PARMS];
 static int num_force_kipmid;
 #ifdef CONFIG_PCI
-static int pci_registered;
+static bool pci_registered;
 #endif
 #ifdef CONFIG_ACPI
-static int pnp_registered;
+static bool pnp_registered;
 #endif
 #ifdef CONFIG_PARISC
-static int parisc_registered;
+static bool parisc_registered;
 #endif
 
 static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
 static int num_max_busy_us;
 
-static int unload_when_empty = 1;
+static bool unload_when_empty = true;
 
 static int add_smi(struct smi_info *smi);
 static int try_smi_init(struct smi_info *smi);
@@ -434,6 +440,13 @@ static void start_clear_flags(struct smi_info *smi_info)
 	smi_info->si_state = SI_CLEARING_FLAGS;
 }
 
+static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val)
+{
+	smi_info->last_timeout_jiffies = jiffies;
+	mod_timer(&smi_info->si_timer, new_val);
+	smi_info->timer_running = true;
+}
+
 /*
  * When we have a situtaion where we run out of memory and cannot
  * allocate messages, we just leave them in the BMC and run the system
@@ -444,10 +457,9 @@ static inline void disable_si_irq(struct smi_info *smi_info)
 {
 	if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
 		start_disable_irq(smi_info);
-		smi_info->interrupt_disabled = 1;
+		smi_info->interrupt_disabled = true;
 		if (!atomic_read(&smi_info->stop_operation))
-			mod_timer(&smi_info->si_timer,
-				  jiffies + SI_TIMEOUT_JIFFIES);
+			smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
 	}
 }
 
@@ -455,7 +467,7 @@ static inline void enable_si_irq(struct smi_info *smi_info)
 {
 	if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
 		start_enable_irq(smi_info);
-		smi_info->interrupt_disabled = 0;
+		smi_info->interrupt_disabled = false;
 	}
 }
 
@@ -700,7 +712,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
 			dev_warn(smi_info->dev,
 				 "Maybe ok, but ipmi might run very slowly.\n");
 		} else
-			smi_info->interrupt_disabled = 0;
+			smi_info->interrupt_disabled = false;
 		smi_info->si_state = SI_NORMAL;
 		break;
 	}
@@ -853,6 +865,19 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 	return si_sm_result;
 }
 
+static void check_start_timer_thread(struct smi_info *smi_info)
+{
+	if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) {
+		smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
+
+		if (smi_info->thread)
+			wake_up_process(smi_info->thread);
+
+		start_next_msg(smi_info);
+		smi_event_handler(smi_info, 0);
+	}
+}
+
 static void sender(void                *send_info,
 		   struct ipmi_smi_msg *msg,
 		   int                 priority)
@@ -906,27 +931,11 @@ static void sender(void                *send_info,
 	else
 		list_add_tail(&msg->link, &smi_info->xmit_msgs);
 
-	if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) {
-		/*
-		 * last_timeout_jiffies is updated here to avoid
-		 * smi_timeout() handler passing very large time_diff
-		 * value to smi_event_handler() that causes
-		 * the send command to abort.
-		 */
-		smi_info->last_timeout_jiffies = jiffies;
-
-		mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
-
-		if (smi_info->thread)
-			wake_up_process(smi_info->thread);
-
-		start_next_msg(smi_info);
-		smi_event_handler(smi_info, 0);
-	}
+	check_start_timer_thread(smi_info);
 	spin_unlock_irqrestore(&smi_info->si_lock, flags);
 }
 
-static void set_run_to_completion(void *send_info, int i_run_to_completion)
+static void set_run_to_completion(void *send_info, bool i_run_to_completion)
 {
 	struct smi_info   *smi_info = send_info;
 	enum si_sm_result result;
@@ -1004,6 +1013,17 @@ static int ipmi_thread(void *data)
 
 		spin_lock_irqsave(&(smi_info->si_lock), flags);
 		smi_result = smi_event_handler(smi_info, 0);
+
+		/*
+		 * If the driver is doing something, there is a possible
+		 * race with the timer.  If the timer handler see idle,
+		 * and the thread here sees something else, the timer
+		 * handler won't restart the timer even though it is
+		 * required.  So start it here if necessary.
+		 */
+		if (smi_result != SI_SM_IDLE && !smi_info->timer_running)
+			smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
+
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
 						  &busy_until);
@@ -1011,9 +1031,15 @@ static int ipmi_thread(void *data)
 			; /* do nothing */
 		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
 			schedule();
-		else if (smi_result == SI_SM_IDLE)
-			schedule_timeout_interruptible(100);
-		else
+		else if (smi_result == SI_SM_IDLE) {
+			if (atomic_read(&smi_info->need_watch)) {
+				schedule_timeout_interruptible(100);
+			} else {
+				/* Wait to be woken up when we are needed. */
+				__set_current_state(TASK_INTERRUPTIBLE);
+				schedule();
+			}
+		} else
 			schedule_timeout_interruptible(1);
 	}
 	return 0;
@@ -1024,7 +1050,7 @@ static void poll(void *send_info)
 {
 	struct smi_info *smi_info = send_info;
 	unsigned long flags = 0;
-	int run_to_completion = smi_info->run_to_completion;
+	bool run_to_completion = smi_info->run_to_completion;
 
 	/*
 	 * Make sure there is some delay in the poll loop so we can
@@ -1049,6 +1075,17 @@ static void request_events(void *send_info)
 	atomic_set(&smi_info->req_events, 1);
 }
 
+static void set_need_watch(void *send_info, bool enable)
+{
+	struct smi_info *smi_info = send_info;
+	unsigned long flags;
+
+	atomic_set(&smi_info->need_watch, enable);
+	spin_lock_irqsave(&smi_info->si_lock, flags);
+	check_start_timer_thread(smi_info);
+	spin_unlock_irqrestore(&smi_info->si_lock, flags);
+}
+
 static int initialized;
 
 static void smi_timeout(unsigned long data)
@@ -1073,10 +1110,6 @@ static void smi_timeout(unsigned long data)
 		     * SI_USEC_PER_JIFFY);
 	smi_result = smi_event_handler(smi_info, time_diff);
 
-	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
-
-	smi_info->last_timeout_jiffies = jiffies_now;
-
 	if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
 		/* Running with interrupts, only do long timeouts. */
 		timeout = jiffies + SI_TIMEOUT_JIFFIES;
@@ -1098,7 +1131,10 @@ static void smi_timeout(unsigned long data)
 
  do_mod_timer:
 	if (smi_result != SI_SM_IDLE)
-		mod_timer(&(smi_info->si_timer), timeout);
+		smi_mod_timer(smi_info, timeout);
+	else
+		smi_info->timer_running = false;
+	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 }
 
 static irqreturn_t si_irq_handler(int irq, void *data)
@@ -1146,8 +1182,7 @@ static int smi_start_processing(void       *send_info,
 
 	/* Set up the timer that drives the interface. */
 	setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
-	new_smi->last_timeout_jiffies = jiffies;
-	mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+	smi_mod_timer(new_smi, jiffies + SI_TIMEOUT_JIFFIES);
 
 	/*
 	 * Check if the user forcefully enabled the daemon.
@@ -1188,7 +1223,7 @@ static int get_smi_info(void *send_info, struct ipmi_smi_info *data)
 	return 0;
 }
 
-static void set_maintenance_mode(void *send_info, int enable)
+static void set_maintenance_mode(void *send_info, bool enable)
 {
 	struct smi_info   *smi_info = send_info;
 
@@ -1202,6 +1237,7 @@ static struct ipmi_smi_handlers handlers = {
 	.get_smi_info		= get_smi_info,
 	.sender			= sender,
 	.request_events		= request_events,
+	.set_need_watch		= set_need_watch,
 	.set_maintenance_mode   = set_maintenance_mode,
 	.set_run_to_completion  = set_run_to_completion,
 	.poll			= poll,
@@ -1229,7 +1265,7 @@ static bool          si_tryplatform = 1;
 #ifdef CONFIG_PCI
 static bool          si_trypci = 1;
 #endif
-static bool          si_trydefaults = 1;
+static bool          si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS);
 static char          *si_type[SI_MAX_PARMS];
 #define MAX_SI_TYPE_STR 30
 static char          si_type_str[MAX_SI_TYPE_STR];
@@ -1328,7 +1364,7 @@ module_param_array(force_kipmid, int, &num_force_kipmid, 0);
 MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
 		 " disabled(0).  Normally the IPMI driver auto-detects"
 		 " this, but the value may be overridden by this parm.");
-module_param(unload_when_empty, int, 0);
+module_param(unload_when_empty, bool, 0);
 MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
 		 " specified or found, default is 1.  Setting to 0"
 		 " is useful for hot add of devices using hotmod.");
@@ -3336,18 +3372,19 @@ static int try_smi_init(struct smi_info *new_smi)
 	INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
 	new_smi->curr_msg = NULL;
 	atomic_set(&new_smi->req_events, 0);
-	new_smi->run_to_completion = 0;
+	new_smi->run_to_completion = false;
 	for (i = 0; i < SI_NUM_STATS; i++)
 		atomic_set(&new_smi->stats[i], 0);
 
-	new_smi->interrupt_disabled = 1;
+	new_smi->interrupt_disabled = true;
 	atomic_set(&new_smi->stop_operation, 0);
+	atomic_set(&new_smi->need_watch, 0);
 	new_smi->intf_num = smi_num;
 	smi_num++;
 
 	rv = try_enable_event_buffer(new_smi);
 	if (rv == 0)
-		new_smi->has_event_buffer = 1;
+		new_smi->has_event_buffer = true;
 
 	/*
 	 * Start clearing the flags before we enable interrupts or the
@@ -3381,7 +3418,7 @@ static int try_smi_init(struct smi_info *new_smi)
 			       rv);
 			goto out_err;
 		}
-		new_smi->dev_registered = 1;
+		new_smi->dev_registered = true;
 	}
 
 	rv = ipmi_register_smi(&handlers,
@@ -3430,7 +3467,7 @@ static int try_smi_init(struct smi_info *new_smi)
 	wait_for_timer_and_thread(new_smi);
 
  out_err:
-	new_smi->interrupt_disabled = 1;
+	new_smi->interrupt_disabled = true;
 
 	if (new_smi->intf) {
 		ipmi_unregister_smi(new_smi->intf);
@@ -3466,7 +3503,7 @@ static int try_smi_init(struct smi_info *new_smi)
 
 	if (new_smi->dev_registered) {
 		platform_device_unregister(new_smi->pdev);
-		new_smi->dev_registered = 0;
+		new_smi->dev_registered = false;
 	}
 
 	return rv;
@@ -3521,14 +3558,14 @@ static int init_ipmi_si(void)
 			printk(KERN_ERR PFX "Unable to register "
 			       "PCI driver: %d\n", rv);
 		else
-			pci_registered = 1;
+			pci_registered = true;
 	}
 #endif
 
 #ifdef CONFIG_ACPI
 	if (si_tryacpi) {
 		pnp_register_driver(&ipmi_pnp_driver);
-		pnp_registered = 1;
+		pnp_registered = true;
 	}
 #endif
 
@@ -3544,7 +3581,7 @@ static int init_ipmi_si(void)
 
 #ifdef CONFIG_PARISC
 	register_parisc_driver(&ipmi_parisc_driver);
-	parisc_registered = 1;
+	parisc_registered = true;
 	/* poking PC IO addresses will crash machine, don't do it */
 	si_trydefaults = 0;
 #endif
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index b27f5342fe76..8d3dfb0c8a26 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -15,7 +15,7 @@ config SYNCLINK_CS
 
 	  This driver may be built as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called synclinkmp.  If you want to do that, say M
+	  The module will be called synclink_cs.  If you want to do that, say M
 	  here.
 
 config CARDMAN_4000
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index daea84c41743..a15ce4ef39cd 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -17,7 +17,7 @@
 #include <linux/device.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
-#include <linux/export.h>
+#include <linux/module.h>
 
 struct ttyprintk_port {
 	struct tty_port port;
@@ -210,10 +210,19 @@ static int __init ttyprintk_init(void)
 	return 0;
 
 error:
-	tty_unregister_driver(ttyprintk_driver);
 	put_tty_driver(ttyprintk_driver);
 	tty_port_destroy(&tpk_port.port);
-	ttyprintk_driver = NULL;
 	return ret;
 }
+
+static void __exit ttyprintk_exit(void)
+{
+	tty_unregister_driver(ttyprintk_driver);
+	put_tty_driver(ttyprintk_driver);
+	tty_port_destroy(&tpk_port.port);
+}
+
 device_initcall(ttyprintk_init);
+module_exit(ttyprintk_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-spear-spics.c b/drivers/gpio/gpio-spear-spics.c
index e9a0415834ea..30bcc539425d 100644
--- a/drivers/gpio/gpio-spear-spics.c
+++ b/drivers/gpio/gpio-spear-spics.c
@@ -2,7 +2,7 @@
  * SPEAr platform SPI chipselect abstraction over gpiolib
  *
  * Copyright (C) 2012 ST Microelectronics
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -205,6 +205,6 @@ static int __init spics_gpio_init(void)
 }
 subsys_initcall(spics_gpio_init);
 
-MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
 MODULE_DESCRIPTION("ST Microlectronics SPEAr SPI Chip Select Abstraction");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 9e8064205bc7..10a2c0866459 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -718,6 +718,9 @@ static int hid_scan_main(struct hid_parser *parser, struct hid_item *item)
 	case HID_MAIN_ITEM_TAG_END_COLLECTION:
 		break;
 	case HID_MAIN_ITEM_TAG_INPUT:
+		/* ignore constant inputs, they will be ignored by hid-input */
+		if (data & HID_MAIN_ITEM_CONSTANT)
+			break;
 		for (i = 0; i < parser->local.usage_index; i++)
 			hid_scan_input_usage(parser, parser->local.usage[i]);
 		break;
@@ -1821,8 +1824,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index bd221263c739..c8af7202c28d 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -455,7 +455,8 @@
 
 #define USB_VENDOR_ID_INTEL_0		0x8086
 #define USB_VENDOR_ID_INTEL_1		0x8087
-#define USB_DEVICE_ID_INTEL_HID_SENSOR	0x09fa
+#define USB_DEVICE_ID_INTEL_HID_SENSOR_0	0x09fa
+#define USB_DEVICE_ID_INTEL_HID_SENSOR_1	0x0a04
 
 #define USB_VENDOR_ID_STM_0             0x0483
 #define USB_DEVICE_ID_STM_HID_SENSOR    0x91d1
@@ -629,8 +630,6 @@
 #define USB_DEVICE_ID_MS_PRESENTER_8K_USB	0x0713
 #define USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K	0x0730
 #define USB_DEVICE_ID_MS_COMFORT_MOUSE_4500	0x076c
-#define USB_DEVICE_ID_MS_TOUCH_COVER_2	0x07a7
-#define USB_DEVICE_ID_MS_TYPE_COVER_2	0x07a9
 
 #define USB_VENDOR_ID_MOJO		0x8282
 #define USB_DEVICE_ID_RETRO_ADAPTER	0x3201
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index 6fd58175a291..8ba17a946f2a 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -274,10 +274,6 @@ static const struct hid_device_id ms_devices[] = {
 		.driver_data = MS_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500),
 		.driver_data = MS_DUPLICATE_USAGES },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2),
-		.driver_data = 0 },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2),
-		.driver_data = 0 },
 
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT),
 		.driver_data = MS_PRESENTER },
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index 5182031f7b52..af8244b1c1f4 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -697,10 +697,13 @@ static void sensor_hub_remove(struct hid_device *hdev)
 
 static const struct hid_device_id sensor_hub_devices[] = {
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_INTEL_0,
-			USB_DEVICE_ID_INTEL_HID_SENSOR),
+			USB_DEVICE_ID_INTEL_HID_SENSOR_0),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_INTEL_1,
-			USB_DEVICE_ID_INTEL_HID_SENSOR),
+			USB_DEVICE_ID_INTEL_HID_SENSOR_0),
+			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_INTEL_1,
+			USB_DEVICE_ID_INTEL_HID_SENSOR_1),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_STM_0,
 			USB_DEVICE_ID_STM_HID_SENSOR),
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 69204afea7a4..908de2789219 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -1721,8 +1721,6 @@ static void sony_remove(struct hid_device *hdev)
 	if (sc->quirks & SONY_LED_SUPPORT)
 		sony_leds_remove(hdev);
 
-	if (sc->worker_initialized)
-		cancel_work_sync(&sc->state_worker);
 	if (sc->quirks & SONY_BATTERY_SUPPORT) {
 		hid_hw_close(hdev);
 		sony_battery_remove(sc);
diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c
index f2d7bf90c9fe..2e7801af466e 100644
--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@@ -55,6 +55,9 @@ static __u32 vmbus_get_next_version(__u32 current_version)
 	case (VERSION_WIN8):
 		return VERSION_WIN7;
 
+	case (VERSION_WIN8_1):
+		return VERSION_WIN8;
+
 	case (VERSION_WS2008):
 	default:
 		return VERSION_INVAL;
@@ -77,7 +80,7 @@ static int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo,
 	msg->interrupt_page = virt_to_phys(vmbus_connection.int_page);
 	msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages[0]);
 	msg->monitor_page2 = virt_to_phys(vmbus_connection.monitor_pages[1]);
-	if (version == VERSION_WIN8)
+	if (version == VERSION_WIN8_1)
 		msg->target_vcpu = hv_context.vp_index[smp_processor_id()];
 
 	/*
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 02436d5d0dab..185452abf32c 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -173,12 +173,15 @@ static void start_ep_timer(struct c4iw_ep *ep)
 	add_timer(&ep->timer);
 }
 
-static void stop_ep_timer(struct c4iw_ep *ep)
+static int stop_ep_timer(struct c4iw_ep *ep)
 {
 	PDBG("%s ep %p stopping\n", __func__, ep);
 	del_timer_sync(&ep->timer);
-	if (!test_and_set_bit(TIMEOUT, &ep->com.flags))
+	if (!test_and_set_bit(TIMEOUT, &ep->com.flags)) {
 		c4iw_put_ep(&ep->com);
+		return 0;
+	}
+	return 1;
 }
 
 static int c4iw_l2t_send(struct c4iw_rdev *rdev, struct sk_buff *skb,
@@ -1165,12 +1168,11 @@ static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb)
 	PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
 
 	/*
-	 * Stop mpa timer.  If it expired, then the state has
-	 * changed and we bail since ep_timeout already aborted
-	 * the connection.
+	 * Stop mpa timer.  If it expired, then
+	 * we ignore the MPA reply.  process_timeout()
+	 * will abort the connection.
 	 */
-	stop_ep_timer(ep);
-	if (ep->com.state != MPA_REQ_SENT)
+	if (stop_ep_timer(ep))
 		return;
 
 	/*
@@ -1375,15 +1377,12 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 
 	PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
 
-	if (ep->com.state != MPA_REQ_WAIT)
-		return;
-
 	/*
 	 * If we get more than the supported amount of private data
 	 * then we must fail this connection.
 	 */
 	if (ep->mpa_pkt_len + skb->len > sizeof(ep->mpa_pkt)) {
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
@@ -1413,13 +1412,13 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 	if (mpa->revision > mpa_rev) {
 		printk(KERN_ERR MOD "%s MPA version mismatch. Local = %d,"
 		       " Received = %d\n", __func__, mpa_rev, mpa->revision);
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
 
 	if (memcmp(mpa->key, MPA_KEY_REQ, sizeof(mpa->key))) {
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
@@ -1430,7 +1429,7 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 	 * Fail if there's too much private data.
 	 */
 	if (plen > MPA_MAX_PRIVATE_DATA) {
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
@@ -1439,7 +1438,7 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 	 * If plen does not account for pkt size
 	 */
 	if (ep->mpa_pkt_len > (sizeof(*mpa) + plen)) {
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
@@ -1496,18 +1495,24 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 	     ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version,
 	     ep->mpa_attr.p2p_type);
 
-	__state_set(&ep->com, MPA_REQ_RCVD);
-	stop_ep_timer(ep);
-
-	/* drive upcall */
-	mutex_lock(&ep->parent_ep->com.mutex);
-	if (ep->parent_ep->com.state != DEAD) {
-		if (connect_request_upcall(ep))
+	/*
+	 * If the endpoint timer already expired, then we ignore
+	 * the start request.  process_timeout() will abort
+	 * the connection.
+	 */
+	if (!stop_ep_timer(ep)) {
+		__state_set(&ep->com, MPA_REQ_RCVD);
+
+		/* drive upcall */
+		mutex_lock(&ep->parent_ep->com.mutex);
+		if (ep->parent_ep->com.state != DEAD) {
+			if (connect_request_upcall(ep))
+				abort_connection(ep, skb, GFP_KERNEL);
+		} else {
 			abort_connection(ep, skb, GFP_KERNEL);
-	} else {
-		abort_connection(ep, skb, GFP_KERNEL);
+		}
+		mutex_unlock(&ep->parent_ep->com.mutex);
 	}
-	mutex_unlock(&ep->parent_ep->com.mutex);
 	return;
 }
 
@@ -2265,7 +2270,7 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		disconnect = 0;
 		break;
 	case MORIBUND:
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		if (ep->com.cm_id && ep->com.qp) {
 			attrs.next_state = C4IW_QP_STATE_IDLE;
 			c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
@@ -2325,10 +2330,10 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
 	case CONNECTING:
 		break;
 	case MPA_REQ_WAIT:
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		break;
 	case MPA_REQ_SENT:
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		if (mpa_rev == 1 || (mpa_rev == 2 && ep->tried_with_mpa_v1))
 			connect_reply_upcall(ep, -ECONNRESET);
 		else {
@@ -2433,7 +2438,7 @@ static int close_con_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 		__state_set(&ep->com, MORIBUND);
 		break;
 	case MORIBUND:
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		if ((ep->com.cm_id) && (ep->com.qp)) {
 			attrs.next_state = C4IW_QP_STATE_IDLE;
 			c4iw_modify_qp(ep->com.qp->rhp,
@@ -3028,7 +3033,7 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
 		if (!test_and_set_bit(CLOSE_SENT, &ep->com.flags)) {
 			close = 1;
 			if (abrupt) {
-				stop_ep_timer(ep);
+				(void)stop_ep_timer(ep);
 				ep->com.state = ABORTING;
 			} else
 				ep->com.state = MORIBUND;
@@ -3462,6 +3467,16 @@ static void process_timeout(struct c4iw_ep *ep)
 		__state_set(&ep->com, ABORTING);
 		close_complete_upcall(ep, -ETIMEDOUT);
 		break;
+	case ABORTING:
+	case DEAD:
+
+		/*
+		 * These states are expected if the ep timed out at the same
+		 * time as another thread was calling stop_ep_timer().
+		 * So we silently do nothing for these states.
+		 */
+		abort = 0;
+		break;
 	default:
 		WARN(1, "%s unexpected state ep %p tid %u state %u\n",
 			__func__, ep, ep->hwtid, ep->com.state);
@@ -3483,6 +3498,8 @@ static void process_timedout_eps(void)
 
 		tmp = timeout_list.next;
 		list_del(tmp);
+		tmp->next = NULL;
+		tmp->prev = NULL;
 		spin_unlock_irq(&timeout_lock);
 		ep = list_entry(tmp, struct c4iw_ep, entry);
 		process_timeout(ep);
@@ -3499,6 +3516,7 @@ static void process_work(struct work_struct *work)
 	unsigned int opcode;
 	int ret;
 
+	process_timedout_eps();
 	while ((skb = skb_dequeue(&rxq))) {
 		rpl = cplhdr(skb);
 		dev = *((struct c4iw_dev **) (skb->cb + sizeof(void *)));
@@ -3508,8 +3526,8 @@ static void process_work(struct work_struct *work)
 		ret = work_handlers[opcode](dev, skb);
 		if (!ret)
 			kfree_skb(skb);
+		process_timedout_eps();
 	}
-	process_timedout_eps();
 }
 
 static DECLARE_WORK(skb_work, process_work);
@@ -3521,8 +3539,13 @@ static void ep_timeout(unsigned long arg)
 
 	spin_lock(&timeout_lock);
 	if (!test_and_set_bit(TIMEOUT, &ep->com.flags)) {
-		list_add_tail(&ep->entry, &timeout_list);
-		kickit = 1;
+		/*
+		 * Only insert if it is not already on the list.
+		 */
+		if (!ep->entry.next) {
+			list_add_tail(&ep->entry, &timeout_list);
+			kickit = 1;
+		}
 	}
 	spin_unlock(&timeout_lock);
 	if (kickit)
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index ce468e542428..cfaa56ada189 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -235,27 +235,21 @@ int c4iw_flush_sq(struct c4iw_qp *qhp)
 	struct t4_cq *cq = &chp->cq;
 	int idx;
 	struct t4_swsqe *swsqe;
-	int error = (qhp->attr.state != C4IW_QP_STATE_CLOSING &&
-			qhp->attr.state != C4IW_QP_STATE_IDLE);
 
 	if (wq->sq.flush_cidx == -1)
 		wq->sq.flush_cidx = wq->sq.cidx;
 	idx = wq->sq.flush_cidx;
 	BUG_ON(idx >= wq->sq.size);
 	while (idx != wq->sq.pidx) {
-		if (error) {
-			swsqe = &wq->sq.sw_sq[idx];
-			BUG_ON(swsqe->flushed);
-			swsqe->flushed = 1;
-			insert_sq_cqe(wq, cq, swsqe);
-			if (wq->sq.oldest_read == swsqe) {
-				BUG_ON(swsqe->opcode != FW_RI_READ_REQ);
-				advance_oldest_read(wq);
-			}
-			flushed++;
-		} else {
-			t4_sq_consume(wq);
+		swsqe = &wq->sq.sw_sq[idx];
+		BUG_ON(swsqe->flushed);
+		swsqe->flushed = 1;
+		insert_sq_cqe(wq, cq, swsqe);
+		if (wq->sq.oldest_read == swsqe) {
+			BUG_ON(swsqe->opcode != FW_RI_READ_REQ);
+			advance_oldest_read(wq);
 		}
+		flushed++;
 		if (++idx == wq->sq.size)
 			idx = 0;
 	}
@@ -678,7 +672,7 @@ skip_cqe:
 static int c4iw_poll_cq_one(struct c4iw_cq *chp, struct ib_wc *wc)
 {
 	struct c4iw_qp *qhp = NULL;
-	struct t4_cqe cqe = {0, 0}, *rd_cqe;
+	struct t4_cqe uninitialized_var(cqe), *rd_cqe;
 	struct t4_wq *wq;
 	u32 credit = 0;
 	u8 cqe_flushed;
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index 9489a388376c..f4fa50a609e2 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -682,7 +682,10 @@ static void c4iw_dealloc(struct uld_ctx *ctx)
 	idr_destroy(&ctx->dev->hwtid_idr);
 	idr_destroy(&ctx->dev->stid_idr);
 	idr_destroy(&ctx->dev->atid_idr);
-	iounmap(ctx->dev->rdev.oc_mw_kva);
+	if (ctx->dev->rdev.bar2_kva)
+		iounmap(ctx->dev->rdev.bar2_kva);
+	if (ctx->dev->rdev.oc_mw_kva)
+		iounmap(ctx->dev->rdev.oc_mw_kva);
 	ib_dealloc_device(&ctx->dev->ibdev);
 	ctx->dev = NULL;
 }
@@ -722,11 +725,31 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
 	}
 	devp->rdev.lldi = *infop;
 
-	devp->rdev.oc_mw_pa = pci_resource_start(devp->rdev.lldi.pdev, 2) +
-		(pci_resource_len(devp->rdev.lldi.pdev, 2) -
-		 roundup_pow_of_two(devp->rdev.lldi.vr->ocq.size));
-	devp->rdev.oc_mw_kva = ioremap_wc(devp->rdev.oc_mw_pa,
-					       devp->rdev.lldi.vr->ocq.size);
+	/*
+	 * For T5 devices, we map all of BAR2 with WC.
+	 * For T4 devices with onchip qp mem, we map only that part
+	 * of BAR2 with WC.
+	 */
+	devp->rdev.bar2_pa = pci_resource_start(devp->rdev.lldi.pdev, 2);
+	if (is_t5(devp->rdev.lldi.adapter_type)) {
+		devp->rdev.bar2_kva = ioremap_wc(devp->rdev.bar2_pa,
+			pci_resource_len(devp->rdev.lldi.pdev, 2));
+		if (!devp->rdev.bar2_kva) {
+			pr_err(MOD "Unable to ioremap BAR2\n");
+			return ERR_PTR(-EINVAL);
+		}
+	} else if (ocqp_supported(infop)) {
+		devp->rdev.oc_mw_pa =
+			pci_resource_start(devp->rdev.lldi.pdev, 2) +
+			pci_resource_len(devp->rdev.lldi.pdev, 2) -
+			roundup_pow_of_two(devp->rdev.lldi.vr->ocq.size);
+		devp->rdev.oc_mw_kva = ioremap_wc(devp->rdev.oc_mw_pa,
+			devp->rdev.lldi.vr->ocq.size);
+		if (!devp->rdev.oc_mw_kva) {
+			pr_err(MOD "Unable to ioremap onchip mem\n");
+			return ERR_PTR(-EINVAL);
+		}
+	}
 
 	PDBG(KERN_INFO MOD "ocq memory: "
 	       "hw_start 0x%x size %u mw_pa 0x%lx mw_kva %p\n",
@@ -1003,9 +1026,11 @@ static int enable_qp_db(int id, void *p, void *data)
 static void resume_rc_qp(struct c4iw_qp *qp)
 {
 	spin_lock(&qp->lock);
-	t4_ring_sq_db(&qp->wq, qp->wq.sq.wq_pidx_inc);
+	t4_ring_sq_db(&qp->wq, qp->wq.sq.wq_pidx_inc,
+		      is_t5(qp->rhp->rdev.lldi.adapter_type), NULL);
 	qp->wq.sq.wq_pidx_inc = 0;
-	t4_ring_rq_db(&qp->wq, qp->wq.rq.wq_pidx_inc);
+	t4_ring_rq_db(&qp->wq, qp->wq.rq.wq_pidx_inc,
+		      is_t5(qp->rhp->rdev.lldi.adapter_type), NULL);
 	qp->wq.rq.wq_pidx_inc = 0;
 	spin_unlock(&qp->lock);
 }
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index e872203c5424..7b8c5806a09d 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -149,6 +149,8 @@ struct c4iw_rdev {
 	struct gen_pool *ocqp_pool;
 	u32 flags;
 	struct cxgb4_lld_info lldi;
+	unsigned long bar2_pa;
+	void __iomem *bar2_kva;
 	unsigned long oc_mw_pa;
 	void __iomem *oc_mw_kva;
 	struct c4iw_stats stats;
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index f9ca072a99ed..ec7a2988a703 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -259,8 +259,12 @@ static int write_tpt_entry(struct c4iw_rdev *rdev, u32 reset_tpt_entry,
 
 	if ((!reset_tpt_entry) && (*stag == T4_STAG_UNSET)) {
 		stag_idx = c4iw_get_resource(&rdev->resource.tpt_table);
-		if (!stag_idx)
+		if (!stag_idx) {
+			mutex_lock(&rdev->stats.lock);
+			rdev->stats.stag.fail++;
+			mutex_unlock(&rdev->stats.lock);
 			return -ENOMEM;
+		}
 		mutex_lock(&rdev->stats.lock);
 		rdev->stats.stag.cur += 32;
 		if (rdev->stats.stag.cur > rdev->stats.stag.max)
diff --git a/drivers/infiniband/hw/cxgb4/provider.c b/drivers/infiniband/hw/cxgb4/provider.c
index 79429256023a..a94a3e12c349 100644
--- a/drivers/infiniband/hw/cxgb4/provider.c
+++ b/drivers/infiniband/hw/cxgb4/provider.c
@@ -328,7 +328,7 @@ static int c4iw_query_device(struct ib_device *ibdev,
 	props->max_mr = c4iw_num_stags(&dev->rdev);
 	props->max_pd = T4_MAX_NUM_PD;
 	props->local_ca_ack_delay = 0;
-	props->max_fast_reg_page_list_len = T4_MAX_FR_DEPTH;
+	props->max_fast_reg_page_list_len = t4_max_fr_depth(use_dsgl);
 
 	return 0;
 }
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index cb76eb5eee1f..7b5114cb486f 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -212,13 +212,23 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 
 	wq->db = rdev->lldi.db_reg;
 	wq->gts = rdev->lldi.gts_reg;
-	if (user) {
-		wq->sq.udb = (u64)pci_resource_start(rdev->lldi.pdev, 2) +
-					(wq->sq.qid << rdev->qpshift);
-		wq->sq.udb &= PAGE_MASK;
-		wq->rq.udb = (u64)pci_resource_start(rdev->lldi.pdev, 2) +
-					(wq->rq.qid << rdev->qpshift);
-		wq->rq.udb &= PAGE_MASK;
+	if (user || is_t5(rdev->lldi.adapter_type)) {
+		u32 off;
+
+		off = (wq->sq.qid << rdev->qpshift) & PAGE_MASK;
+		if (user) {
+			wq->sq.udb = (u64 __iomem *)(rdev->bar2_pa + off);
+		} else {
+			off += 128 * (wq->sq.qid & rdev->qpmask) + 8;
+			wq->sq.udb = (u64 __iomem *)(rdev->bar2_kva + off);
+		}
+		off = (wq->rq.qid << rdev->qpshift) & PAGE_MASK;
+		if (user) {
+			wq->rq.udb = (u64 __iomem *)(rdev->bar2_pa + off);
+		} else {
+			off += 128 * (wq->rq.qid & rdev->qpmask) + 8;
+			wq->rq.udb = (u64 __iomem *)(rdev->bar2_kva + off);
+		}
 	}
 	wq->rdev = rdev;
 	wq->rq.msn = 1;
@@ -299,9 +309,10 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 	if (ret)
 		goto free_dma;
 
-	PDBG("%s sqid 0x%x rqid 0x%x kdb 0x%p squdb 0x%llx rqudb 0x%llx\n",
+	PDBG("%s sqid 0x%x rqid 0x%x kdb 0x%p squdb 0x%lx rqudb 0x%lx\n",
 	     __func__, wq->sq.qid, wq->rq.qid, wq->db,
-	     (unsigned long long)wq->sq.udb, (unsigned long long)wq->rq.udb);
+	     (__force unsigned long) wq->sq.udb,
+	     (__force unsigned long) wq->rq.udb);
 
 	return 0;
 free_dma:
@@ -425,6 +436,8 @@ static int build_rdma_send(struct t4_sq *sq, union t4_wr *wqe,
 	default:
 		return -EINVAL;
 	}
+	wqe->send.r3 = 0;
+	wqe->send.r4 = 0;
 
 	plen = 0;
 	if (wr->num_sge) {
@@ -555,7 +568,8 @@ static int build_fastreg(struct t4_sq *sq, union t4_wr *wqe,
 	int pbllen = roundup(wr->wr.fast_reg.page_list_len * sizeof(u64), 32);
 	int rem;
 
-	if (wr->wr.fast_reg.page_list_len > T4_MAX_FR_DEPTH)
+	if (wr->wr.fast_reg.page_list_len >
+	    t4_max_fr_depth(use_dsgl))
 		return -EINVAL;
 
 	wqe->fr.qpbinde_to_dcacpu = 0;
@@ -650,9 +664,10 @@ static int ring_kernel_sq_db(struct c4iw_qp *qhp, u16 inc)
 
 	spin_lock_irqsave(&qhp->rhp->lock, flags);
 	spin_lock(&qhp->lock);
-	if (qhp->rhp->db_state == NORMAL) {
-		t4_ring_sq_db(&qhp->wq, inc);
-	} else {
+	if (qhp->rhp->db_state == NORMAL)
+		t4_ring_sq_db(&qhp->wq, inc,
+			      is_t5(qhp->rhp->rdev.lldi.adapter_type), NULL);
+	else {
 		add_to_fc_list(&qhp->rhp->db_fc_list, &qhp->db_fc_entry);
 		qhp->wq.sq.wq_pidx_inc += inc;
 	}
@@ -667,9 +682,10 @@ static int ring_kernel_rq_db(struct c4iw_qp *qhp, u16 inc)
 
 	spin_lock_irqsave(&qhp->rhp->lock, flags);
 	spin_lock(&qhp->lock);
-	if (qhp->rhp->db_state == NORMAL) {
-		t4_ring_rq_db(&qhp->wq, inc);
-	} else {
+	if (qhp->rhp->db_state == NORMAL)
+		t4_ring_rq_db(&qhp->wq, inc,
+			      is_t5(qhp->rhp->rdev.lldi.adapter_type), NULL);
+	else {
 		add_to_fc_list(&qhp->rhp->db_fc_list, &qhp->db_fc_entry);
 		qhp->wq.rq.wq_pidx_inc += inc;
 	}
@@ -686,7 +702,7 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 	enum fw_wr_opcodes fw_opcode = 0;
 	enum fw_ri_wr_flags fw_flags;
 	struct c4iw_qp *qhp;
-	union t4_wr *wqe;
+	union t4_wr *wqe = NULL;
 	u32 num_wrs;
 	struct t4_swsqe *swsqe;
 	unsigned long flag;
@@ -792,7 +808,8 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		idx += DIV_ROUND_UP(len16*16, T4_EQ_ENTRY_SIZE);
 	}
 	if (!qhp->rhp->rdev.status_page->db_off) {
-		t4_ring_sq_db(&qhp->wq, idx);
+		t4_ring_sq_db(&qhp->wq, idx,
+			      is_t5(qhp->rhp->rdev.lldi.adapter_type), wqe);
 		spin_unlock_irqrestore(&qhp->lock, flag);
 	} else {
 		spin_unlock_irqrestore(&qhp->lock, flag);
@@ -806,7 +823,7 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 {
 	int err = 0;
 	struct c4iw_qp *qhp;
-	union t4_recv_wr *wqe;
+	union t4_recv_wr *wqe = NULL;
 	u32 num_wrs;
 	u8 len16 = 0;
 	unsigned long flag;
@@ -858,7 +875,8 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 		num_wrs--;
 	}
 	if (!qhp->rhp->rdev.status_page->db_off) {
-		t4_ring_rq_db(&qhp->wq, idx);
+		t4_ring_rq_db(&qhp->wq, idx,
+			      is_t5(qhp->rhp->rdev.lldi.adapter_type), wqe);
 		spin_unlock_irqrestore(&qhp->lock, flag);
 	} else {
 		spin_unlock_irqrestore(&qhp->lock, flag);
@@ -1352,6 +1370,7 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 		switch (attrs->next_state) {
 		case C4IW_QP_STATE_CLOSING:
 			BUG_ON(atomic_read(&qhp->ep->com.kref.refcount) < 2);
+			t4_set_wq_in_error(&qhp->wq);
 			set_state(qhp, C4IW_QP_STATE_CLOSING);
 			ep = qhp->ep;
 			if (!internal) {
@@ -1359,18 +1378,18 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 				disconnect = 1;
 				c4iw_get_ep(&qhp->ep->com);
 			}
-			t4_set_wq_in_error(&qhp->wq);
 			ret = rdma_fini(rhp, qhp, ep);
 			if (ret)
 				goto err;
 			break;
 		case C4IW_QP_STATE_TERMINATE:
+			t4_set_wq_in_error(&qhp->wq);
 			set_state(qhp, C4IW_QP_STATE_TERMINATE);
 			qhp->attr.layer_etype = attrs->layer_etype;
 			qhp->attr.ecode = attrs->ecode;
-			t4_set_wq_in_error(&qhp->wq);
 			ep = qhp->ep;
 			disconnect = 1;
+			c4iw_get_ep(&qhp->ep->com);
 			if (!internal)
 				terminate = 1;
 			else {
@@ -1378,11 +1397,10 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 				if (ret)
 					goto err;
 			}
-			c4iw_get_ep(&qhp->ep->com);
 			break;
 		case C4IW_QP_STATE_ERROR:
-			set_state(qhp, C4IW_QP_STATE_ERROR);
 			t4_set_wq_in_error(&qhp->wq);
+			set_state(qhp, C4IW_QP_STATE_ERROR);
 			if (!internal) {
 				abort = 1;
 				disconnect = 1;
@@ -1677,11 +1695,11 @@ struct ib_qp *c4iw_create_qp(struct ib_pd *pd, struct ib_qp_init_attr *attrs,
 		mm2->len = PAGE_ALIGN(qhp->wq.rq.memsize);
 		insert_mmap(ucontext, mm2);
 		mm3->key = uresp.sq_db_gts_key;
-		mm3->addr = qhp->wq.sq.udb;
+		mm3->addr = (__force unsigned long) qhp->wq.sq.udb;
 		mm3->len = PAGE_SIZE;
 		insert_mmap(ucontext, mm3);
 		mm4->key = uresp.rq_db_gts_key;
-		mm4->addr = qhp->wq.rq.udb;
+		mm4->addr = (__force unsigned long) qhp->wq.rq.udb;
 		mm4->len = PAGE_SIZE;
 		insert_mmap(ucontext, mm4);
 		if (mm5) {
diff --git a/drivers/infiniband/hw/cxgb4/resource.c b/drivers/infiniband/hw/cxgb4/resource.c
index cdef4d7fb6d8..67df71a7012e 100644
--- a/drivers/infiniband/hw/cxgb4/resource.c
+++ b/drivers/infiniband/hw/cxgb4/resource.c
@@ -179,8 +179,12 @@ u32 c4iw_get_qpid(struct c4iw_rdev *rdev, struct c4iw_dev_ucontext *uctx)
 		kfree(entry);
 	} else {
 		qid = c4iw_get_resource(&rdev->resource.qid_table);
-		if (!qid)
+		if (!qid) {
+			mutex_lock(&rdev->stats.lock);
+			rdev->stats.qid.fail++;
+			mutex_unlock(&rdev->stats.lock);
 			goto out;
+		}
 		mutex_lock(&rdev->stats.lock);
 		rdev->stats.qid.cur += rdev->qpmask + 1;
 		mutex_unlock(&rdev->stats.lock);
@@ -322,8 +326,8 @@ u32 c4iw_rqtpool_alloc(struct c4iw_rdev *rdev, int size)
 	unsigned long addr = gen_pool_alloc(rdev->rqt_pool, size << 6);
 	PDBG("%s addr 0x%x size %d\n", __func__, (u32)addr, size << 6);
 	if (!addr)
-		printk_ratelimited(KERN_WARNING MOD "%s: Out of RQT memory\n",
-		       pci_name(rdev->lldi.pdev));
+		pr_warn_ratelimited(MOD "%s: Out of RQT memory\n",
+				    pci_name(rdev->lldi.pdev));
 	mutex_lock(&rdev->stats.lock);
 	if (addr) {
 		rdev->stats.rqt.cur += roundup(size << 6, 1 << MIN_RQT_SHIFT);
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index eeca8b1e6376..2178f3198410 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -84,7 +84,14 @@ struct t4_status_page {
 			sizeof(struct fw_ri_isgl)) / sizeof(struct fw_ri_sge))
 #define T4_MAX_FR_IMMD ((T4_SQ_NUM_BYTES - sizeof(struct fw_ri_fr_nsmr_wr) - \
 			sizeof(struct fw_ri_immd)) & ~31UL)
-#define T4_MAX_FR_DEPTH (1024 / sizeof(u64))
+#define T4_MAX_FR_IMMD_DEPTH (T4_MAX_FR_IMMD / sizeof(u64))
+#define T4_MAX_FR_DSGL 1024
+#define T4_MAX_FR_DSGL_DEPTH (T4_MAX_FR_DSGL / sizeof(u64))
+
+static inline int t4_max_fr_depth(int use_dsgl)
+{
+	return use_dsgl ? T4_MAX_FR_DSGL_DEPTH : T4_MAX_FR_IMMD_DEPTH;
+}
 
 #define T4_RQ_NUM_SLOTS 2
 #define T4_RQ_NUM_BYTES (T4_EQ_ENTRY_SIZE * T4_RQ_NUM_SLOTS)
@@ -292,7 +299,7 @@ struct t4_sq {
 	unsigned long phys_addr;
 	struct t4_swsqe *sw_sq;
 	struct t4_swsqe *oldest_read;
-	u64 udb;
+	u64 __iomem *udb;
 	size_t memsize;
 	u32 qid;
 	u16 in_use;
@@ -314,7 +321,7 @@ struct t4_rq {
 	dma_addr_t dma_addr;
 	DEFINE_DMA_UNMAP_ADDR(mapping);
 	struct t4_swrqe *sw_rq;
-	u64 udb;
+	u64 __iomem *udb;
 	size_t memsize;
 	u32 qid;
 	u32 msn;
@@ -435,15 +442,67 @@ static inline u16 t4_sq_wq_size(struct t4_wq *wq)
 		return wq->sq.size * T4_SQ_NUM_SLOTS;
 }
 
-static inline void t4_ring_sq_db(struct t4_wq *wq, u16 inc)
+/* This function copies 64 byte coalesced work request to memory
+ * mapped BAR2 space. For coalesced WRs, the SGE fetches data
+ * from the FIFO instead of from Host.
+ */
+static inline void pio_copy(u64 __iomem *dst, u64 *src)
+{
+	int count = 8;
+
+	while (count) {
+		writeq(*src, dst);
+		src++;
+		dst++;
+		count--;
+	}
+}
+
+static inline void t4_ring_sq_db(struct t4_wq *wq, u16 inc, u8 t5,
+				 union t4_wr *wqe)
 {
+
+	/* Flush host queue memory writes. */
 	wmb();
+	if (t5) {
+		if (inc == 1 && wqe) {
+			PDBG("%s: WC wq->sq.pidx = %d\n",
+			     __func__, wq->sq.pidx);
+			pio_copy(wq->sq.udb + 7, (void *)wqe);
+		} else {
+			PDBG("%s: DB wq->sq.pidx = %d\n",
+			     __func__, wq->sq.pidx);
+			writel(PIDX_T5(inc), wq->sq.udb);
+		}
+
+		/* Flush user doorbell area writes. */
+		wmb();
+		return;
+	}
 	writel(QID(wq->sq.qid) | PIDX(inc), wq->db);
 }
 
-static inline void t4_ring_rq_db(struct t4_wq *wq, u16 inc)
+static inline void t4_ring_rq_db(struct t4_wq *wq, u16 inc, u8 t5,
+				 union t4_recv_wr *wqe)
 {
+
+	/* Flush host queue memory writes. */
 	wmb();
+	if (t5) {
+		if (inc == 1 && wqe) {
+			PDBG("%s: WC wq->rq.pidx = %d\n",
+			     __func__, wq->rq.pidx);
+			pio_copy(wq->rq.udb + 7, (void *)wqe);
+		} else {
+			PDBG("%s: DB wq->rq.pidx = %d\n",
+			     __func__, wq->rq.pidx);
+			writel(PIDX_T5(inc), wq->rq.udb);
+		}
+
+		/* Flush user doorbell area writes. */
+		wmb();
+		return;
+	}
 	writel(QID(wq->rq.qid) | PIDX(inc), wq->db);
 }
 
@@ -568,6 +627,9 @@ static inline int t4_next_hw_cqe(struct t4_cq *cq, struct t4_cqe **cqe)
 		printk(KERN_ERR MOD "cq overflow cqid %u\n", cq->cqid);
 		BUG_ON(1);
 	} else if (t4_valid_cqe(cq, &cq->queue[cq->cidx])) {
+
+		/* Ensure CQE is flushed to memory */
+		rmb();
 		*cqe = &cq->queue[cq->cidx];
 		ret = 0;
 	} else
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index fa6dc870adae..364d4b6937f5 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -282,6 +282,8 @@ static int mlx5_ib_query_device(struct ib_device *ibdev,
 		props->sig_guard_cap = IB_GUARD_T10DIF_CRC |
 				       IB_GUARD_T10DIF_CSUM;
 	}
+	if (flags & MLX5_DEV_CAP_FLAG_BLOCK_MCAST)
+		props->device_cap_flags |= IB_DEVICE_BLOCK_MULTICAST_LOOPBACK;
 
 	props->vendor_id	   = be32_to_cpup((__be32 *)(out_mad->data + 36)) &
 		0xffffff;
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index ae788d27b93f..dc930ed21eca 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -807,6 +807,15 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
 	spin_lock_init(&qp->sq.lock);
 	spin_lock_init(&qp->rq.lock);
 
+	if (init_attr->create_flags & IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK) {
+		if (!(dev->mdev.caps.flags & MLX5_DEV_CAP_FLAG_BLOCK_MCAST)) {
+			mlx5_ib_dbg(dev, "block multicast loopback isn't supported\n");
+			return -EINVAL;
+		} else {
+			qp->flags |= MLX5_IB_QP_BLOCK_MULTICAST_LOOPBACK;
+		}
+	}
+
 	if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR)
 		qp->sq_signal_bits = MLX5_WQE_CTRL_CQ_UPDATE;
 
@@ -878,6 +887,9 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
 	if (qp->wq_sig)
 		in->ctx.flags_pd |= cpu_to_be32(MLX5_QP_ENABLE_SIG);
 
+	if (qp->flags & MLX5_IB_QP_BLOCK_MULTICAST_LOOPBACK)
+		in->ctx.flags_pd |= cpu_to_be32(MLX5_QP_BLOCK_MCAST);
+
 	if (qp->scat_cqe && is_connected(init_attr->qp_type)) {
 		int rcqe_sz;
 		int scqe_sz;
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 87897b95666d..ded76c101dde 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -858,13 +858,9 @@ static int mthca_enable_msi_x(struct mthca_dev *mdev)
 	entries[1].entry = 1;
 	entries[2].entry = 2;
 
-	err = pci_enable_msix(mdev->pdev, entries, ARRAY_SIZE(entries));
-	if (err) {
-		if (err > 0)
-			mthca_info(mdev, "Only %d MSI-X vectors available, "
-				   "not using MSI-X\n", err);
+	err = pci_enable_msix_exact(mdev->pdev, entries, ARRAY_SIZE(entries));
+	if (err)
 		return err;
-	}
 
 	mdev->eq_table.eq[MTHCA_EQ_COMP ].msi_x_vector = entries[0].vector;
 	mdev->eq_table.eq[MTHCA_EQ_ASYNC].msi_x_vector = entries[1].vector;
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index c8d9c4ab142b..61a0046efb76 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -197,46 +197,47 @@ static void qib_msix_setup(struct qib_devdata *dd, int pos, u32 *msixcnt,
 			   struct qib_msix_entry *qib_msix_entry)
 {
 	int ret;
-	u32 tabsize = 0;
-	u16 msix_flags;
+	int nvec = *msixcnt;
 	struct msix_entry *msix_entry;
 	int i;
 
+	ret = pci_msix_vec_count(dd->pcidev);
+	if (ret < 0)
+		goto do_intx;
+
+	nvec = min(nvec, ret);
+
 	/* We can't pass qib_msix_entry array to qib_msix_setup
 	 * so use a dummy msix_entry array and copy the allocated
 	 * irq back to the qib_msix_entry array. */
-	msix_entry = kmalloc(*msixcnt * sizeof(*msix_entry), GFP_KERNEL);
-	if (!msix_entry) {
-		ret = -ENOMEM;
+	msix_entry = kmalloc(nvec * sizeof(*msix_entry), GFP_KERNEL);
+	if (!msix_entry)
 		goto do_intx;
-	}
-	for (i = 0; i < *msixcnt; i++)
+
+	for (i = 0; i < nvec; i++)
 		msix_entry[i] = qib_msix_entry[i].msix;
 
-	pci_read_config_word(dd->pcidev, pos + PCI_MSIX_FLAGS, &msix_flags);
-	tabsize = 1 + (msix_flags & PCI_MSIX_FLAGS_QSIZE);
-	if (tabsize > *msixcnt)
-		tabsize = *msixcnt;
-	ret = pci_enable_msix(dd->pcidev, msix_entry, tabsize);
-	if (ret > 0) {
-		tabsize = ret;
-		ret = pci_enable_msix(dd->pcidev, msix_entry, tabsize);
-	}
-do_intx:
-	if (ret) {
-		qib_dev_err(dd,
-			"pci_enable_msix %d vectors failed: %d, falling back to INTx\n",
-			tabsize, ret);
-		tabsize = 0;
-	}
-	for (i = 0; i < tabsize; i++)
+	ret = pci_enable_msix_range(dd->pcidev, msix_entry, 1, nvec);
+	if (ret < 0)
+		goto free_msix_entry;
+	else
+		nvec = ret;
+
+	for (i = 0; i < nvec; i++)
 		qib_msix_entry[i].msix = msix_entry[i];
+
 	kfree(msix_entry);
-	*msixcnt = tabsize;
+	*msixcnt = nvec;
+	return;
 
-	if (ret)
-		qib_enable_intx(dd->pcidev);
+free_msix_entry:
+	kfree(msix_entry);
 
+do_intx:
+	qib_dev_err(dd, "pci_enable_msix_range %d vectors failed: %d, "
+			"falling back to INTx\n", nvec, ret);
+	*msixcnt = 0;
+	qib_enable_intx(dd->pcidev);
 }
 
 /**
diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c
index 37dab0b472cd..7d35287f9e90 100644
--- a/drivers/irqchip/irq-vic.c
+++ b/drivers/irqchip/irq-vic.c
@@ -24,6 +24,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -228,12 +229,17 @@ static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
 static void vic_handle_irq_cascaded(unsigned int irq, struct irq_desc *desc)
 {
 	u32 stat, hwirq;
+	struct irq_chip *host_chip = irq_desc_get_chip(desc);
 	struct vic_device *vic = irq_desc_get_handler_data(desc);
 
+	chained_irq_enter(host_chip, desc);
+
 	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
 		hwirq = ffs(stat) - 1;
 		generic_handle_irq(irq_find_mapping(vic->domain, hwirq));
 	}
+
+	chained_irq_exit(host_chip, desc);
 }
 
 /*
diff --git a/drivers/irqchip/spear-shirq.c b/drivers/irqchip/spear-shirq.c
index 8527743b5cef..3fdda3a40269 100644
--- a/drivers/irqchip/spear-shirq.c
+++ b/drivers/irqchip/spear-shirq.c
@@ -5,7 +5,7 @@
  * Viresh Kumar <viresh.linux@gmail.com>
  *
  * Copyright (C) 2012 ST Microelectronics
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/isdn/icn/icn.c b/drivers/isdn/icn/icn.c
index 53d487f0c79d..6a7447c304ac 100644
--- a/drivers/isdn/icn/icn.c
+++ b/drivers/isdn/icn/icn.c
@@ -1155,7 +1155,7 @@ icn_command(isdn_ctrl *c, icn_card *card)
 	ulong a;
 	ulong flags;
 	int i;
-	char cbuf[60];
+	char cbuf[80];
 	isdn_ctrl cmd;
 	icn_cdef cdef;
 	char __user *arg;
@@ -1309,7 +1309,6 @@ icn_command(isdn_ctrl *c, icn_card *card)
 			break;
 		if ((c->arg & 255) < ICN_BCH) {
 			char *p;
-			char dial[50];
 			char dcode[4];
 
 			a = c->arg;
@@ -1321,10 +1320,10 @@ icn_command(isdn_ctrl *c, icn_card *card)
 			} else
 				/* Normal Dial */
 				strcpy(dcode, "CAL");
-			strcpy(dial, p);
-			sprintf(cbuf, "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
-				dcode, dial, c->parm.setup.si1,
-				c->parm.setup.si2, c->parm.setup.eazmsn);
+			snprintf(cbuf, sizeof(cbuf),
+				 "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1),
+				 dcode, p, c->parm.setup.si1,
+				 c->parm.setup.si2, c->parm.setup.eazmsn);
 			i = icn_writecmd(cbuf, strlen(cbuf), 0, card);
 		}
 		break;
diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c
index d1278b5f3028..004926955263 100644
--- a/drivers/mcb/mcb-parse.c
+++ b/drivers/mcb/mcb-parse.c
@@ -141,6 +141,7 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
 		default:
 			pr_err("Invalid chameleon descriptor type 0x%x\n",
 				dtype);
+			kfree(header);
 			return -EINVAL;
 		}
 		num_cells++;
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 25247a852912..ad1b9bea446e 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4370,8 +4370,7 @@ static struct stripe_head *__get_priority_stripe(struct r5conf *conf, int group)
 		sh->group = NULL;
 	}
 	list_del_init(&sh->lru);
-	atomic_inc(&sh->count);
-	BUG_ON(atomic_read(&sh->count) != 1);
+	BUG_ON(atomic_inc_return(&sh->count) != 1);
 	return sh;
 }
 
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 1cb74085e410..8baff0effc7d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -300,8 +300,8 @@ config SGI_GRU_DEBUG
 	depends on SGI_GRU
 	default n
 	---help---
-	This option enables addition debugging code for the SGI GRU driver. If
-	you are unsure, say N.
+	This option enables additional debugging code for the SGI GRU driver.
+	If you are unsure, say N.
 
 config APDS9802ALS
 	tristate "Medfield Avago APDS9802 ALS Sensor module"
diff --git a/drivers/misc/genwqe/card_base.h b/drivers/misc/genwqe/card_base.h
index 5e4dbd21f89a..0e608a288603 100644
--- a/drivers/misc/genwqe/card_base.h
+++ b/drivers/misc/genwqe/card_base.h
@@ -337,6 +337,44 @@ enum genwqe_requ_state {
 };
 
 /**
+ * struct genwqe_sgl - Scatter gather list describing user-space memory
+ * @sgl:            scatter gather list needs to be 128 byte aligned
+ * @sgl_dma_addr:   dma address of sgl
+ * @sgl_size:       size of area used for sgl
+ * @user_addr:      user-space address of memory area
+ * @user_size:      size of user-space memory area
+ * @page:           buffer for partial pages if needed
+ * @page_dma_addr:  dma address partial pages
+ */
+struct genwqe_sgl {
+	dma_addr_t sgl_dma_addr;
+	struct sg_entry *sgl;
+	size_t sgl_size;	/* size of sgl */
+
+	void __user *user_addr; /* user-space base-address */
+	size_t user_size;       /* size of memory area */
+
+	unsigned long nr_pages;
+	unsigned long fpage_offs;
+	size_t fpage_size;
+	size_t lpage_size;
+
+	void *fpage;
+	dma_addr_t fpage_dma_addr;
+
+	void *lpage;
+	dma_addr_t lpage_dma_addr;
+};
+
+int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
+			  void __user *user_addr, size_t user_size);
+
+int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
+		     dma_addr_t *dma_list);
+
+int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl);
+
+/**
  * struct ddcb_requ - Kernel internal representation of the DDCB request
  * @cmd:          User space representation of the DDCB execution request
  */
@@ -347,9 +385,7 @@ struct ddcb_requ {
 	struct ddcb_queue *queue;	  /* associated queue */
 
 	struct dma_mapping  dma_mappings[DDCB_FIXUPS];
-	struct sg_entry     *sgl[DDCB_FIXUPS];
-	dma_addr_t	    sgl_dma_addr[DDCB_FIXUPS];
-	size_t		    sgl_size[DDCB_FIXUPS];
+	struct genwqe_sgl sgls[DDCB_FIXUPS];
 
 	/* kernel/user shared content */
 	struct genwqe_ddcb_cmd cmd;	/* ddcb_no for this request */
@@ -453,22 +489,6 @@ int  genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m,
 int  genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m,
 			struct ddcb_requ *req);
 
-struct sg_entry *genwqe_alloc_sgl(struct genwqe_dev *cd, int num_pages,
-				 dma_addr_t *dma_addr, size_t *sgl_size);
-
-void genwqe_free_sgl(struct genwqe_dev *cd, struct sg_entry *sg_list,
-		    dma_addr_t dma_addr, size_t size);
-
-int genwqe_setup_sgl(struct genwqe_dev *cd,
-		    unsigned long offs,
-		    unsigned long size,
-		    struct sg_entry *sgl, /* genwqe sgl */
-		    dma_addr_t dma_addr, size_t sgl_size,
-		    dma_addr_t *dma_list, int page_offs, int num_pages);
-
-int genwqe_check_sgl(struct genwqe_dev *cd, struct sg_entry *sg_list,
-		     int size);
-
 static inline bool dma_mapping_used(struct dma_mapping *m)
 {
 	if (!m)
diff --git a/drivers/misc/genwqe/card_ddcb.c b/drivers/misc/genwqe/card_ddcb.c
index 6f1acc0ccf88..c8046db2d5a2 100644
--- a/drivers/misc/genwqe/card_ddcb.c
+++ b/drivers/misc/genwqe/card_ddcb.c
@@ -305,6 +305,8 @@ static int enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_queue *queue,
 			break;
 
 		new = (old | DDCB_NEXT_BE32);
+
+		wmb();
 		icrc_hsi_shi = cmpxchg(&prev_ddcb->icrc_hsi_shi_32, old, new);
 
 		if (icrc_hsi_shi == old)
@@ -314,6 +316,8 @@ static int enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_queue *queue,
 	/* Queue must be re-started by updating QUEUE_OFFSET */
 	ddcb_mark_tapped(pddcb);
 	num = (u64)ddcb_no << 8;
+
+	wmb();
 	__genwqe_writeq(cd, queue->IO_QUEUE_OFFSET, num); /* start queue */
 
 	return RET_DDCB_TAPPED;
@@ -1306,7 +1310,7 @@ static int queue_wake_up_all(struct genwqe_dev *cd)
  */
 int genwqe_finish_queue(struct genwqe_dev *cd)
 {
-	int i, rc, in_flight;
+	int i, rc = 0, in_flight;
 	int waitmax = genwqe_ddcb_software_timeout;
 	struct pci_dev *pci_dev = cd->pci_dev;
 	struct ddcb_queue *queue = &cd->queue;
diff --git a/drivers/misc/genwqe/card_dev.c b/drivers/misc/genwqe/card_dev.c
index 2c2c9cc75231..1d2f163a1906 100644
--- a/drivers/misc/genwqe/card_dev.c
+++ b/drivers/misc/genwqe/card_dev.c
@@ -531,7 +531,9 @@ static int do_flash_update(struct genwqe_file *cfile,
 	case '1':
 		cmdopts = 0x1C;
 		break;		/* download/erase_first/part_1 */
-	case 'v':		/* cmdopts = 0x0c (VPD) */
+	case 'v':
+		cmdopts = 0x0C;
+		break;		/* download/erase_first/vpd */
 	default:
 		return -EINVAL;
 	}
@@ -665,6 +667,8 @@ static int do_flash_read(struct genwqe_file *cfile,
 		cmdopts = 0x1A;
 		break;		/* upload/part_1 */
 	case 'v':
+		cmdopts = 0x0A;
+		break;		/* upload/vpd */
 	default:
 		return -EINVAL;
 	}
@@ -836,15 +840,8 @@ static int ddcb_cmd_cleanup(struct genwqe_file *cfile, struct ddcb_requ *req)
 			__genwqe_del_mapping(cfile, dma_map);
 			genwqe_user_vunmap(cd, dma_map, req);
 		}
-		if (req->sgl[i] != NULL) {
-			genwqe_free_sgl(cd, req->sgl[i],
-				       req->sgl_dma_addr[i],
-				       req->sgl_size[i]);
-			req->sgl[i] = NULL;
-			req->sgl_dma_addr[i] = 0x0;
-			req->sgl_size[i] = 0;
-		}
-
+		if (req->sgls[i].sgl != NULL)
+			genwqe_free_sync_sgl(cd, &req->sgls[i]);
 	}
 	return 0;
 }
@@ -913,7 +910,7 @@ static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req)
 
 		case ATS_TYPE_SGL_RDWR:
 		case ATS_TYPE_SGL_RD: {
-			int page_offs, nr_pages, offs;
+			int page_offs;
 
 			u_addr = be64_to_cpu(*((__be64 *)
 					       &cmd->asiv[asiv_offs]));
@@ -951,27 +948,18 @@ static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req)
 				page_offs = 0;
 			}
 
-			offs = offset_in_page(u_addr);
-			nr_pages = DIV_ROUND_UP(offs + u_size, PAGE_SIZE);
-
 			/* create genwqe style scatter gather list */
-			req->sgl[i] = genwqe_alloc_sgl(cd, m->nr_pages,
-						      &req->sgl_dma_addr[i],
-						      &req->sgl_size[i]);
-			if (req->sgl[i] == NULL) {
-				rc = -ENOMEM;
+			rc = genwqe_alloc_sync_sgl(cd, &req->sgls[i],
+						   (void __user *)u_addr,
+						   u_size);
+			if (rc != 0)
 				goto err_out;
-			}
-			genwqe_setup_sgl(cd, offs, u_size,
-					req->sgl[i],
-					req->sgl_dma_addr[i],
-					req->sgl_size[i],
-					m->dma_list,
-					page_offs,
-					nr_pages);
+
+			genwqe_setup_sgl(cd, &req->sgls[i],
+					 &m->dma_list[page_offs]);
 
 			*((__be64 *)&cmd->asiv[asiv_offs]) =
-				cpu_to_be64(req->sgl_dma_addr[i]);
+				cpu_to_be64(req->sgls[i].sgl_dma_addr);
 
 			break;
 		}
diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c
index 6b1a6ef9f1a8..d049d271699c 100644
--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@@ -275,67 +275,107 @@ static int genwqe_sgl_size(int num_pages)
 	return roundup(len, PAGE_SIZE);
 }
 
-struct sg_entry *genwqe_alloc_sgl(struct genwqe_dev *cd, int num_pages,
-				  dma_addr_t *dma_addr, size_t *sgl_size)
+/**
+ * genwqe_alloc_sync_sgl() - Allocate memory for sgl and overlapping pages
+ *
+ * Allocates memory for sgl and overlapping pages. Pages which might
+ * overlap other user-space memory blocks are being cached for DMAs,
+ * such that we do not run into syncronization issues. Data is copied
+ * from user-space into the cached pages.
+ */
+int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
+			  void __user *user_addr, size_t user_size)
 {
+	int rc;
 	struct pci_dev *pci_dev = cd->pci_dev;
-	struct sg_entry *sgl;
 
-	*sgl_size = genwqe_sgl_size(num_pages);
-	if (get_order(*sgl_size) > MAX_ORDER) {
+	sgl->fpage_offs = offset_in_page((unsigned long)user_addr);
+	sgl->fpage_size = min_t(size_t, PAGE_SIZE-sgl->fpage_offs, user_size);
+	sgl->nr_pages = DIV_ROUND_UP(sgl->fpage_offs + user_size, PAGE_SIZE);
+	sgl->lpage_size = (user_size - sgl->fpage_size) % PAGE_SIZE;
+
+	dev_dbg(&pci_dev->dev, "[%s] uaddr=%p usize=%8ld nr_pages=%ld "
+		"fpage_offs=%lx fpage_size=%ld lpage_size=%ld\n",
+		__func__, user_addr, user_size, sgl->nr_pages,
+		sgl->fpage_offs, sgl->fpage_size, sgl->lpage_size);
+
+	sgl->user_addr = user_addr;
+	sgl->user_size = user_size;
+	sgl->sgl_size = genwqe_sgl_size(sgl->nr_pages);
+
+	if (get_order(sgl->sgl_size) > MAX_ORDER) {
 		dev_err(&pci_dev->dev,
 			"[%s] err: too much memory requested!\n", __func__);
-		return NULL;
+		return -ENOMEM;
 	}
 
-	sgl = __genwqe_alloc_consistent(cd, *sgl_size, dma_addr);
-	if (sgl == NULL) {
+	sgl->sgl = __genwqe_alloc_consistent(cd, sgl->sgl_size,
+					     &sgl->sgl_dma_addr);
+	if (sgl->sgl == NULL) {
 		dev_err(&pci_dev->dev,
 			"[%s] err: no memory available!\n", __func__);
-		return NULL;
+		return -ENOMEM;
 	}
 
-	return sgl;
+	/* Only use buffering on incomplete pages */
+	if ((sgl->fpage_size != 0) && (sgl->fpage_size != PAGE_SIZE)) {
+		sgl->fpage = __genwqe_alloc_consistent(cd, PAGE_SIZE,
+						       &sgl->fpage_dma_addr);
+		if (sgl->fpage == NULL)
+			goto err_out;
+
+		/* Sync with user memory */
+		if (copy_from_user(sgl->fpage + sgl->fpage_offs,
+				   user_addr, sgl->fpage_size)) {
+			rc = -EFAULT;
+			goto err_out;
+		}
+	}
+	if (sgl->lpage_size != 0) {
+		sgl->lpage = __genwqe_alloc_consistent(cd, PAGE_SIZE,
+						       &sgl->lpage_dma_addr);
+		if (sgl->lpage == NULL)
+			goto err_out1;
+
+		/* Sync with user memory */
+		if (copy_from_user(sgl->lpage, user_addr + user_size -
+				   sgl->lpage_size, sgl->lpage_size)) {
+			rc = -EFAULT;
+			goto err_out1;
+		}
+	}
+	return 0;
+
+ err_out1:
+	__genwqe_free_consistent(cd, PAGE_SIZE, sgl->fpage,
+				 sgl->fpage_dma_addr);
+ err_out:
+	__genwqe_free_consistent(cd, sgl->sgl_size, sgl->sgl,
+				 sgl->sgl_dma_addr);
+	return -ENOMEM;
 }
 
-int genwqe_setup_sgl(struct genwqe_dev *cd,
-		     unsigned long offs,
-		     unsigned long size,
-		     struct sg_entry *sgl,
-		     dma_addr_t dma_addr, size_t sgl_size,
-		     dma_addr_t *dma_list, int page_offs, int num_pages)
+int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
+		     dma_addr_t *dma_list)
 {
 	int i = 0, j = 0, p;
 	unsigned long dma_offs, map_offs;
-	struct pci_dev *pci_dev = cd->pci_dev;
 	dma_addr_t prev_daddr = 0;
 	struct sg_entry *s, *last_s = NULL;
-
-	/* sanity checks */
-	if (offs > PAGE_SIZE) {
-		dev_err(&pci_dev->dev,
-			"[%s] too large start offs %08lx\n", __func__, offs);
-		return -EFAULT;
-	}
-	if (sgl_size < genwqe_sgl_size(num_pages)) {
-		dev_err(&pci_dev->dev,
-			"[%s] sgl_size too small %08lx for %d pages\n",
-			__func__, sgl_size, num_pages);
-		return -EFAULT;
-	}
+	size_t size = sgl->user_size;
 
 	dma_offs = 128;		/* next block if needed/dma_offset */
-	map_offs = offs;	/* offset in first page */
+	map_offs = sgl->fpage_offs; /* offset in first page */
 
-	s = &sgl[0];		/* first set of 8 entries */
+	s = &sgl->sgl[0];	/* first set of 8 entries */
 	p = 0;			/* page */
-	while (p < num_pages) {
+	while (p < sgl->nr_pages) {
 		dma_addr_t daddr;
 		unsigned int size_to_map;
 
 		/* always write the chaining entry, cleanup is done later */
 		j = 0;
-		s[j].target_addr = cpu_to_be64(dma_addr + dma_offs);
+		s[j].target_addr = cpu_to_be64(sgl->sgl_dma_addr + dma_offs);
 		s[j].len	 = cpu_to_be32(128);
 		s[j].flags	 = cpu_to_be32(SG_CHAINED);
 		j++;
@@ -343,7 +383,17 @@ int genwqe_setup_sgl(struct genwqe_dev *cd,
 		while (j < 8) {
 			/* DMA mapping for requested page, offs, size */
 			size_to_map = min(size, PAGE_SIZE - map_offs);
-			daddr = dma_list[page_offs + p] + map_offs;
+
+			if ((p == 0) && (sgl->fpage != NULL)) {
+				daddr = sgl->fpage_dma_addr + map_offs;
+
+			} else if ((p == sgl->nr_pages - 1) &&
+				   (sgl->lpage != NULL)) {
+				daddr = sgl->lpage_dma_addr;
+			} else {
+				daddr = dma_list[p] + map_offs;
+			}
+
 			size -= size_to_map;
 			map_offs = 0;
 
@@ -358,7 +408,7 @@ int genwqe_setup_sgl(struct genwqe_dev *cd,
 							  size_to_map);
 
 				p++; /* process next page */
-				if (p == num_pages)
+				if (p == sgl->nr_pages)
 					goto fixup;  /* nothing to do */
 
 				prev_daddr = daddr + size_to_map;
@@ -374,7 +424,7 @@ int genwqe_setup_sgl(struct genwqe_dev *cd,
 			j++;
 
 			p++;	/* process next page */
-			if (p == num_pages)
+			if (p == sgl->nr_pages)
 				goto fixup;  /* nothing to do */
 		}
 		dma_offs += 128;
@@ -395,10 +445,50 @@ int genwqe_setup_sgl(struct genwqe_dev *cd,
 	return 0;
 }
 
-void genwqe_free_sgl(struct genwqe_dev *cd, struct sg_entry *sg_list,
-		    dma_addr_t dma_addr, size_t size)
+/**
+ * genwqe_free_sync_sgl() - Free memory for sgl and overlapping pages
+ *
+ * After the DMA transfer has been completed we free the memory for
+ * the sgl and the cached pages. Data is being transfered from cached
+ * pages into user-space buffers.
+ */
+int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl)
 {
-	__genwqe_free_consistent(cd, size, sg_list, dma_addr);
+	int rc;
+	struct pci_dev *pci_dev = cd->pci_dev;
+
+	if (sgl->fpage) {
+		if (copy_to_user(sgl->user_addr, sgl->fpage + sgl->fpage_offs,
+				 sgl->fpage_size)) {
+			dev_err(&pci_dev->dev, "[%s] err: copying fpage!\n",
+				__func__);
+			rc = -EFAULT;
+		}
+		__genwqe_free_consistent(cd, PAGE_SIZE, sgl->fpage,
+					 sgl->fpage_dma_addr);
+		sgl->fpage = NULL;
+		sgl->fpage_dma_addr = 0;
+	}
+	if (sgl->lpage) {
+		if (copy_to_user(sgl->user_addr + sgl->user_size -
+				 sgl->lpage_size, sgl->lpage,
+				 sgl->lpage_size)) {
+			dev_err(&pci_dev->dev, "[%s] err: copying lpage!\n",
+				__func__);
+			rc = -EFAULT;
+		}
+		__genwqe_free_consistent(cd, PAGE_SIZE, sgl->lpage,
+					 sgl->lpage_dma_addr);
+		sgl->lpage = NULL;
+		sgl->lpage_dma_addr = 0;
+	}
+	__genwqe_free_consistent(cd, sgl->sgl_size, sgl->sgl,
+				 sgl->sgl_dma_addr);
+
+	sgl->sgl = NULL;
+	sgl->sgl_dma_addr = 0x0;
+	sgl->sgl_size = 0;
+	return rc;
 }
 
 /**
diff --git a/drivers/misc/genwqe/genwqe_driver.h b/drivers/misc/genwqe/genwqe_driver.h
index 46e916b36c70..cd5263163a6e 100644
--- a/drivers/misc/genwqe/genwqe_driver.h
+++ b/drivers/misc/genwqe/genwqe_driver.h
@@ -36,7 +36,7 @@
 #include <asm/byteorder.h>
 #include <linux/genwqe/genwqe_card.h>
 
-#define DRV_VERS_STRING		"2.0.0"
+#define DRV_VERS_STRING		"2.0.15"
 
 /*
  * Static minor number assignement, until we decide/implement
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 66f411a6e8ea..cabc04383685 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -115,6 +115,11 @@
 #define MEI_DEV_ID_LPT_HR     0x8CBA  /* Lynx Point H Refresh */
 
 #define MEI_DEV_ID_WPT_LP     0x9CBA  /* Wildcat Point LP */
+
+/* Host Firmware Status Registers in PCI Config Space */
+#define PCI_CFG_HFS_1         0x40
+#define PCI_CFG_HFS_2         0x48
+
 /*
  * MEI HW Section
  */
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 29b5af8efb71..4e3cba6da3f5 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -455,8 +455,7 @@ int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list)
 
 		cl->status = 0;
 		list_del(&cb->list);
-		if (MEI_WRITING == cl->writing_state &&
-		    cb->fop_type == MEI_FOP_WRITE &&
+		if (cb->fop_type == MEI_FOP_WRITE &&
 		    cl != &dev->iamthif_cl) {
 			cl_dbg(dev, cl, "MEI WRITE COMPLETE\n");
 			cl->writing_state = MEI_WRITE_COMPLETE;
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index b35594dbf52f..147413145c97 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -644,8 +644,7 @@ static unsigned int mei_poll(struct file *file, poll_table *wait)
 		goto out;
 	}
 
-	if (MEI_WRITE_COMPLETE == cl->writing_state)
-		mask |= (POLLIN | POLLRDNORM);
+	mask |= (POLLIN | POLLRDNORM);
 
 out:
 	mutex_unlock(&dev->device_lock);
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 1c8fd3a3e135..95889e2e31ff 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -97,15 +97,31 @@ static bool mei_me_quirk_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
 	u32 reg;
-	if (ent->device == MEI_DEV_ID_PBG_1) {
-		pci_read_config_dword(pdev, 0x48, &reg);
-		/* make sure that bit 9 is up and bit 10 is down */
-		if ((reg & 0x600) == 0x200) {
-			dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n");
-			return false;
-		}
+	/* Cougar Point || Patsburg */
+	if (ent->device == MEI_DEV_ID_CPT_1 ||
+	    ent->device == MEI_DEV_ID_PBG_1) {
+		pci_read_config_dword(pdev, PCI_CFG_HFS_2, &reg);
+		/* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
+		if ((reg & 0x600) == 0x200)
+			goto no_mei;
 	}
+
+	/* Lynx Point */
+	if (ent->device == MEI_DEV_ID_LPT_H  ||
+	    ent->device == MEI_DEV_ID_LPT_W  ||
+	    ent->device == MEI_DEV_ID_LPT_HR) {
+		/* Read ME FW Status check for SPS Firmware */
+		pci_read_config_dword(pdev, PCI_CFG_HFS_1, &reg);
+		/* if bits [19:16] = 15, running SPS Firmware */
+		if ((reg & 0xf0000) == 0xf0000)
+			goto no_mei;
+	}
+
 	return true;
+
+no_mei:
+	dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n");
+	return false;
 }
 /**
  * mei_probe - Device Initialization Routine
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 363da96e6891..c4176b0f382d 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -6,7 +6,7 @@
  *
  * Copyright © 2010 STMicroelectronics.
  * Ashish Priyadarshi
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -1089,5 +1089,5 @@ static struct platform_driver spear_smi_driver = {
 module_platform_driver(spear_smi_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
 MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips");
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index a8efb18e42fa..0ab83708b6a1 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8627,6 +8627,7 @@ bnx2_remove_one(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int
 bnx2_suspend(struct device *device)
 {
@@ -8665,7 +8666,6 @@ bnx2_resume(struct device *device)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
 static SIMPLE_DEV_PM_OPS(bnx2_pm_ops, bnx2_suspend, bnx2_resume);
 #define BNX2_PM_OPS (&bnx2_pm_ops)
 
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index b9f7022f4e81..e5d95c5ce1ad 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -12286,7 +12286,9 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
 	if (tg3_flag(tp, MAX_RXPEND_64) &&
 	    tp->rx_pending > 63)
 		tp->rx_pending = 63;
-	tp->rx_jumbo_pending = ering->rx_jumbo_pending;
+
+	if (tg3_flag(tp, JUMBO_RING_ENABLE))
+		tp->rx_jumbo_pending = ering->rx_jumbo_pending;
 
 	for (i = 0; i < tp->irq_max; i++)
 		tp->napi[i].tx_pending = ering->tx_pending;
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 751d5c7b312d..7e49c43b7af3 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -4,7 +4,7 @@
 
 config NET_CADENCE
 	bool "Cadence devices"
-	depends on HAS_IOMEM
+	depends on HAS_IOMEM && (ARM || AVR32 || COMPILE_TEST)
 	default y
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
@@ -22,7 +22,7 @@ if NET_CADENCE
 
 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
-	depends on HAS_DMA
+	depends on HAS_DMA && (ARCH_AT91RM9200 || COMPILE_TEST)
 	select MACB
 	---help---
 	  If you wish to compile a kernel for the AT91RM9200 and enable
@@ -30,7 +30,7 @@ config ARM_AT91_ETHER
 
 config MACB
 	tristate "Cadence MACB/GEM support"
-	depends on HAS_DMA
+	depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || COMPILE_TEST)
 	select PHYLIB
 	---help---
 	  The Cadence MACB ethernet interface is found on many Atmel AT32 and
diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
index 81e8402a74b4..8a96572fdde0 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
@@ -154,7 +154,7 @@ static int write_l2e(struct adapter *adap, struct l2t_entry *e, int sync)
 	req->params = htons(L2T_W_PORT(e->lport) | L2T_W_NOREPLY(!sync));
 	req->l2t_idx = htons(e->idx);
 	req->vlan = htons(e->vlan);
-	if (e->neigh)
+	if (e->neigh && !(e->neigh->dev->flags & IFF_LOOPBACK))
 		memcpy(e->dmac, e->neigh->ha, sizeof(e->dmac));
 	memcpy(req->dst_mac, e->dmac, sizeof(req->dst_mac));
 
@@ -394,6 +394,8 @@ struct l2t_entry *cxgb4_l2t_get(struct l2t_data *d, struct neighbour *neigh,
 	if (e) {
 		spin_lock(&e->lock);          /* avoid race with t4_l2t_free */
 		e->state = L2T_STATE_RESOLVING;
+		if (neigh->dev->flags & IFF_LOOPBACK)
+			memcpy(e->dmac, physdev->dev_addr, sizeof(e->dmac));
 		memcpy(e->addr, addr, addr_len);
 		e->ifindex = ifidx;
 		e->hash = hash;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index fb2fe65903c2..bba67681aeaa 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -682,7 +682,7 @@ enum {
 	SF_RD_ID        = 0x9f,       /* read ID */
 	SF_ERASE_SECTOR = 0xd8,       /* erase sector */
 
-	FW_MAX_SIZE = 512 * 1024,
+	FW_MAX_SIZE = 16 * SF_SEC_SIZE,
 };
 
 /**
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 8ccaa2520dc3..97db5a7179df 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -374,6 +374,7 @@ enum vf_state {
 #define BE_FLAGS_NAPI_ENABLED			(1 << 9)
 #define BE_FLAGS_QNQ_ASYNC_EVT_RCVD		(1 << 11)
 #define BE_FLAGS_VXLAN_OFFLOADS			(1 << 12)
+#define BE_FLAGS_SETUP_DONE			(1 << 13)
 
 #define BE_UC_PMAC_COUNT			30
 #define BE_VF_UC_PMAC_COUNT			2
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 3e6df47b6973..a18645407d21 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2033,11 +2033,13 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 	bool dummy_wrb;
 	int i, pending_txqs;
 
-	/* Wait for a max of 200ms for all the tx-completions to arrive. */
+	/* Stop polling for compls when HW has been silent for 10ms */
 	do {
 		pending_txqs = adapter->num_tx_qs;
 
 		for_all_tx_queues(adapter, txo, i) {
+			cmpl = 0;
+			num_wrbs = 0;
 			txq = &txo->q;
 			while ((txcp = be_tx_compl_get(&txo->cq))) {
 				end_idx =
@@ -2050,14 +2052,13 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 			if (cmpl) {
 				be_cq_notify(adapter, txo->cq.id, false, cmpl);
 				atomic_sub(num_wrbs, &txq->used);
-				cmpl = 0;
-				num_wrbs = 0;
+				timeo = 0;
 			}
 			if (atomic_read(&txq->used) == 0)
 				pending_txqs--;
 		}
 
-		if (pending_txqs == 0 || ++timeo > 200)
+		if (pending_txqs == 0 || ++timeo > 10 || be_hw_error(adapter))
 			break;
 
 		mdelay(1);
@@ -2725,6 +2726,12 @@ static int be_close(struct net_device *netdev)
 	struct be_eq_obj *eqo;
 	int i;
 
+	/* This protection is needed as be_close() may be called even when the
+	 * adapter is in cleared state (after eeh perm failure)
+	 */
+	if (!(adapter->flags & BE_FLAGS_SETUP_DONE))
+		return 0;
+
 	be_roce_dev_close(adapter);
 
 	if (adapter->flags & BE_FLAGS_NAPI_ENABLED) {
@@ -3055,6 +3062,7 @@ static int be_clear(struct be_adapter *adapter)
 	be_clear_queues(adapter);
 
 	be_msix_disable(adapter);
+	adapter->flags &= ~BE_FLAGS_SETUP_DONE;
 	return 0;
 }
 
@@ -3559,6 +3567,7 @@ static int be_setup(struct be_adapter *adapter)
 		adapter->phy.fc_autoneg = 1;
 
 	be_schedule_worker(adapter);
+	adapter->flags |= BE_FLAGS_SETUP_DONE;
 	return 0;
 err:
 	be_clear(adapter);
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index d04b1c3c9b85..14786c8bf99e 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -91,7 +91,7 @@
 #define MVNETA_RX_MIN_FRAME_SIZE                 0x247c
 #define MVNETA_SERDES_CFG			 0x24A0
 #define      MVNETA_SGMII_SERDES_PROTO		 0x0cc7
-#define      MVNETA_RGMII_SERDES_PROTO		 0x0667
+#define      MVNETA_QSGMII_SERDES_PROTO		 0x0667
 #define MVNETA_TYPE_PRIO                         0x24bc
 #define      MVNETA_FORCE_UNI                    BIT(21)
 #define MVNETA_TXQ_CMD_1                         0x24e4
@@ -2721,29 +2721,44 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp,
 }
 
 /* Power up the port */
-static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
+static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
 {
-	u32 val;
+	u32 ctrl;
 
 	/* MAC Cause register should be cleared */
 	mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
 
-	if (phy_mode == PHY_INTERFACE_MODE_SGMII)
-		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
-	else
-		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_RGMII_SERDES_PROTO);
+	ctrl = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
 
-	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-
-	val |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
+	/* Even though it might look weird, when we're configured in
+	 * SGMII or QSGMII mode, the RGMII bit needs to be set.
+	 */
+	switch(phy_mode) {
+	case PHY_INTERFACE_MODE_QSGMII:
+		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
+		ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
+		ctrl |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		ctrl |= MVNETA_GMAC2_PORT_RGMII;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	/* Cancel Port Reset */
-	val &= ~MVNETA_GMAC2_PORT_RESET;
-	mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+	ctrl &= ~MVNETA_GMAC2_PORT_RESET;
+	mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
 
 	while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
 		MVNETA_GMAC2_PORT_RESET) != 0)
 		continue;
+
+	return 0;
 }
 
 /* Device initialization routine */
@@ -2854,7 +2869,12 @@ static int mvneta_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "can't init eth hal\n");
 		goto err_free_stats;
 	}
-	mvneta_port_power_up(pp, phy_mode);
+
+	err = mvneta_port_power_up(pp, phy_mode);
+	if (err < 0) {
+		dev_err(&pdev->dev, "can't power up port\n");
+		goto err_deinit;
+	}
 
 	dram_target_info = mv_mbus_dram_info();
 	if (dram_target_info)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_cq.c b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
index 70e95324a97d..c2cd8d31bcad 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_cq.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_cq.c
@@ -66,7 +66,6 @@ int mlx4_en_create_cq(struct mlx4_en_priv *priv,
 
 	cq->ring = ring;
 	cq->is_tx = mode;
-	spin_lock_init(&cq->lock);
 
 	/* Allocate HW buffers on provided NUMA node.
 	 * dev->numa_node is used in mtt range allocation flow.
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index f085c2df5e69..7e4b1720c3d1 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1304,15 +1304,11 @@ static void mlx4_en_netpoll(struct net_device *dev)
 {
 	struct mlx4_en_priv *priv = netdev_priv(dev);
 	struct mlx4_en_cq *cq;
-	unsigned long flags;
 	int i;
 
 	for (i = 0; i < priv->rx_ring_num; i++) {
 		cq = priv->rx_cq[i];
-		spin_lock_irqsave(&cq->lock, flags);
-		napi_synchronize(&cq->napi);
-		mlx4_en_process_rx_cq(dev, cq, 0);
-		spin_unlock_irqrestore(&cq->lock, flags);
+		napi_schedule(&cq->napi);
 	}
 }
 #endif
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index f0ae95f66ceb..cef267e24f9c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -2301,13 +2301,8 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 	/* Allow large DMA segments, up to the firmware limit of 1 GB */
 	dma_set_max_seg_size(&pdev->dev, 1024 * 1024 * 1024);
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		err = -ENOMEM;
-		goto err_release_regions;
-	}
-
-	dev       = &priv->dev;
+	dev       = pci_get_drvdata(pdev);
+	priv      = mlx4_priv(dev);
 	dev->pdev = pdev;
 	INIT_LIST_HEAD(&priv->ctx_list);
 	spin_lock_init(&priv->ctx_lock);
@@ -2374,10 +2369,10 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 			} else {
 				atomic_inc(&pf_loading);
 				err = pci_enable_sriov(pdev, total_vfs);
-				atomic_dec(&pf_loading);
 				if (err) {
 					mlx4_err(dev, "Failed to enable SR-IOV, continuing without SR-IOV (err = %d).\n",
 						 err);
+					atomic_dec(&pf_loading);
 					err = 0;
 				} else {
 					mlx4_warn(dev, "Running in master mode\n");
@@ -2535,8 +2530,10 @@ slave_start:
 	mlx4_sense_init(dev);
 	mlx4_start_sense(dev);
 
-	priv->pci_dev_data = pci_dev_data;
-	pci_set_drvdata(pdev, dev);
+	priv->removed = 0;
+
+	if (mlx4_is_master(dev) && dev->num_vfs)
+		atomic_dec(&pf_loading);
 
 	return 0;
 
@@ -2588,6 +2585,9 @@ err_rel_own:
 	if (!mlx4_is_slave(dev))
 		mlx4_free_ownership(dev);
 
+	if (mlx4_is_master(dev) && dev->num_vfs)
+		atomic_dec(&pf_loading);
+
 	kfree(priv->dev.dev_vfs);
 
 err_free_dev:
@@ -2604,85 +2604,110 @@ err_disable_pdev:
 
 static int mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	struct mlx4_priv *priv;
+	struct mlx4_dev *dev;
+
 	printk_once(KERN_INFO "%s", mlx4_version);
 
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev       = &priv->dev;
+	pci_set_drvdata(pdev, dev);
+	priv->pci_dev_data = id->driver_data;
+
 	return __mlx4_init_one(pdev, id->driver_data);
 }
 
-static void mlx4_remove_one(struct pci_dev *pdev)
+static void __mlx4_remove_one(struct pci_dev *pdev)
 {
 	struct mlx4_dev  *dev  = pci_get_drvdata(pdev);
 	struct mlx4_priv *priv = mlx4_priv(dev);
+	int               pci_dev_data;
 	int p;
 
-	if (dev) {
-		/* in SRIOV it is not allowed to unload the pf's
-		 * driver while there are alive vf's */
-		if (mlx4_is_master(dev)) {
-			if (mlx4_how_many_lives_vf(dev))
-				printk(KERN_ERR "Removing PF when there are assigned VF's !!!\n");
-		}
-		mlx4_stop_sense(dev);
-		mlx4_unregister_device(dev);
+	if (priv->removed)
+		return;
 
-		for (p = 1; p <= dev->caps.num_ports; p++) {
-			mlx4_cleanup_port_info(&priv->port[p]);
-			mlx4_CLOSE_PORT(dev, p);
-		}
+	pci_dev_data = priv->pci_dev_data;
 
-		if (mlx4_is_master(dev))
-			mlx4_free_resource_tracker(dev,
-						   RES_TR_FREE_SLAVES_ONLY);
-
-		mlx4_cleanup_counters_table(dev);
-		mlx4_cleanup_qp_table(dev);
-		mlx4_cleanup_srq_table(dev);
-		mlx4_cleanup_cq_table(dev);
-		mlx4_cmd_use_polling(dev);
-		mlx4_cleanup_eq_table(dev);
-		mlx4_cleanup_mcg_table(dev);
-		mlx4_cleanup_mr_table(dev);
-		mlx4_cleanup_xrcd_table(dev);
-		mlx4_cleanup_pd_table(dev);
+	/* in SRIOV it is not allowed to unload the pf's
+	 * driver while there are alive vf's */
+	if (mlx4_is_master(dev) && mlx4_how_many_lives_vf(dev))
+		printk(KERN_ERR "Removing PF when there are assigned VF's !!!\n");
+	mlx4_stop_sense(dev);
+	mlx4_unregister_device(dev);
 
-		if (mlx4_is_master(dev))
-			mlx4_free_resource_tracker(dev,
-						   RES_TR_FREE_STRUCTS_ONLY);
-
-		iounmap(priv->kar);
-		mlx4_uar_free(dev, &priv->driver_uar);
-		mlx4_cleanup_uar_table(dev);
-		if (!mlx4_is_slave(dev))
-			mlx4_clear_steering(dev);
-		mlx4_free_eq_table(dev);
-		if (mlx4_is_master(dev))
-			mlx4_multi_func_cleanup(dev);
-		mlx4_close_hca(dev);
-		if (mlx4_is_slave(dev))
-			mlx4_multi_func_cleanup(dev);
-		mlx4_cmd_cleanup(dev);
-
-		if (dev->flags & MLX4_FLAG_MSI_X)
-			pci_disable_msix(pdev);
-		if (dev->flags & MLX4_FLAG_SRIOV) {
-			mlx4_warn(dev, "Disabling SR-IOV\n");
-			pci_disable_sriov(pdev);
-		}
+	for (p = 1; p <= dev->caps.num_ports; p++) {
+		mlx4_cleanup_port_info(&priv->port[p]);
+		mlx4_CLOSE_PORT(dev, p);
+	}
 
-		if (!mlx4_is_slave(dev))
-			mlx4_free_ownership(dev);
+	if (mlx4_is_master(dev))
+		mlx4_free_resource_tracker(dev,
+					   RES_TR_FREE_SLAVES_ONLY);
 
-		kfree(dev->caps.qp0_tunnel);
-		kfree(dev->caps.qp0_proxy);
-		kfree(dev->caps.qp1_tunnel);
-		kfree(dev->caps.qp1_proxy);
-		kfree(dev->dev_vfs);
+	mlx4_cleanup_counters_table(dev);
+	mlx4_cleanup_qp_table(dev);
+	mlx4_cleanup_srq_table(dev);
+	mlx4_cleanup_cq_table(dev);
+	mlx4_cmd_use_polling(dev);
+	mlx4_cleanup_eq_table(dev);
+	mlx4_cleanup_mcg_table(dev);
+	mlx4_cleanup_mr_table(dev);
+	mlx4_cleanup_xrcd_table(dev);
+	mlx4_cleanup_pd_table(dev);
 
-		kfree(priv);
-		pci_release_regions(pdev);
-		pci_disable_device(pdev);
-		pci_set_drvdata(pdev, NULL);
+	if (mlx4_is_master(dev))
+		mlx4_free_resource_tracker(dev,
+					   RES_TR_FREE_STRUCTS_ONLY);
+
+	iounmap(priv->kar);
+	mlx4_uar_free(dev, &priv->driver_uar);
+	mlx4_cleanup_uar_table(dev);
+	if (!mlx4_is_slave(dev))
+		mlx4_clear_steering(dev);
+	mlx4_free_eq_table(dev);
+	if (mlx4_is_master(dev))
+		mlx4_multi_func_cleanup(dev);
+	mlx4_close_hca(dev);
+	if (mlx4_is_slave(dev))
+		mlx4_multi_func_cleanup(dev);
+	mlx4_cmd_cleanup(dev);
+
+	if (dev->flags & MLX4_FLAG_MSI_X)
+		pci_disable_msix(pdev);
+	if (dev->flags & MLX4_FLAG_SRIOV) {
+		mlx4_warn(dev, "Disabling SR-IOV\n");
+		pci_disable_sriov(pdev);
+		dev->num_vfs = 0;
 	}
+
+	if (!mlx4_is_slave(dev))
+		mlx4_free_ownership(dev);
+
+	kfree(dev->caps.qp0_tunnel);
+	kfree(dev->caps.qp0_proxy);
+	kfree(dev->caps.qp1_tunnel);
+	kfree(dev->caps.qp1_proxy);
+	kfree(dev->dev_vfs);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	memset(priv, 0, sizeof(*priv));
+	priv->pci_dev_data = pci_dev_data;
+	priv->removed = 1;
+}
+
+static void mlx4_remove_one(struct pci_dev *pdev)
+{
+	struct mlx4_dev  *dev  = pci_get_drvdata(pdev);
+	struct mlx4_priv *priv = mlx4_priv(dev);
+
+	__mlx4_remove_one(pdev);
+	kfree(priv);
+	pci_set_drvdata(pdev, NULL);
 }
 
 int mlx4_restart_one(struct pci_dev *pdev)
@@ -2692,7 +2717,7 @@ int mlx4_restart_one(struct pci_dev *pdev)
 	int		  pci_dev_data;
 
 	pci_dev_data = priv->pci_dev_data;
-	mlx4_remove_one(pdev);
+	__mlx4_remove_one(pdev);
 	return __mlx4_init_one(pdev, pci_dev_data);
 }
 
@@ -2747,7 +2772,7 @@ MODULE_DEVICE_TABLE(pci, mlx4_pci_table);
 static pci_ers_result_t mlx4_pci_err_detected(struct pci_dev *pdev,
 					      pci_channel_state_t state)
 {
-	mlx4_remove_one(pdev);
+	__mlx4_remove_one(pdev);
 
 	return state == pci_channel_io_perm_failure ?
 		PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET;
@@ -2755,11 +2780,11 @@ static pci_ers_result_t mlx4_pci_err_detected(struct pci_dev *pdev,
 
 static pci_ers_result_t mlx4_pci_slot_reset(struct pci_dev *pdev)
 {
-	const struct pci_device_id *id;
-	int ret;
+	struct mlx4_dev	 *dev  = pci_get_drvdata(pdev);
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	int               ret;
 
-	id = pci_match_id(mlx4_pci_table, pdev);
-	ret = __mlx4_init_one(pdev, id->driver_data);
+	ret = __mlx4_init_one(pdev, priv->pci_dev_data);
 
 	return ret ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
 }
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index cf8be41abb36..f9c465101963 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -800,6 +800,7 @@ struct mlx4_priv {
 	spinlock_t		ctx_lock;
 
 	int			pci_dev_data;
+	int                     removed;
 
 	struct list_head        pgdir_list;
 	struct mutex            pgdir_mutex;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 7a733c287744..04d9b6fe3e80 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -319,7 +319,6 @@ struct mlx4_en_cq {
 	struct mlx4_cq          mcq;
 	struct mlx4_hwq_resources wqres;
 	int                     ring;
-	spinlock_t              lock;
 	struct net_device      *dev;
 	struct napi_struct	napi;
 	int size;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index b48737dcd3c5..ba20c721ee97 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -2139,8 +2139,6 @@ static int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *adapter)
 	ahw->max_mac_filters = nic_info.max_mac_filters;
 	ahw->max_mtu = nic_info.max_mtu;
 
-	adapter->max_tx_rings = ahw->max_tx_ques;
-	adapter->max_sds_rings = ahw->max_rx_ques;
 	/* eSwitch capability indicates vNIC mode.
 	 * vNIC and SRIOV are mutually exclusive operational modes.
 	 * If SR-IOV capability is detected, SR-IOV physical function
@@ -2161,6 +2159,7 @@ static int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *adapter)
 int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
+	u16 max_sds_rings, max_tx_rings;
 	int ret;
 
 	ret = qlcnic_83xx_get_nic_configuration(adapter);
@@ -2173,18 +2172,21 @@ int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter)
 		if (qlcnic_83xx_config_vnic_opmode(adapter))
 			return -EIO;
 
-		adapter->max_sds_rings = QLCNIC_MAX_VNIC_SDS_RINGS;
-		adapter->max_tx_rings = QLCNIC_MAX_VNIC_TX_RINGS;
+		max_sds_rings = QLCNIC_MAX_VNIC_SDS_RINGS;
+		max_tx_rings = QLCNIC_MAX_VNIC_TX_RINGS;
 	} else if (ret == QLC_83XX_DEFAULT_OPMODE) {
 		ahw->nic_mode = QLCNIC_DEFAULT_MODE;
 		adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver;
 		ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry;
-		adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS;
-		adapter->max_tx_rings = QLCNIC_MAX_TX_RINGS;
+		max_sds_rings = QLCNIC_MAX_SDS_RINGS;
+		max_tx_rings = QLCNIC_MAX_TX_RINGS;
 	} else {
 		return -EIO;
 	}
 
+	adapter->max_sds_rings = min(ahw->max_rx_ques, max_sds_rings);
+	adapter->max_tx_rings = min(ahw->max_tx_ques, max_tx_rings);
+
 	return 0;
 }
 
@@ -2348,15 +2350,16 @@ int qlcnic_83xx_init(struct qlcnic_adapter *adapter, int pci_using_dac)
 		goto disable_intr;
 	}
 
+	INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work);
+
 	err = qlcnic_83xx_setup_mbx_intr(adapter);
 	if (err)
 		goto disable_mbx_intr;
 
 	qlcnic_83xx_clear_function_resources(adapter);
-
-	INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work);
-
+	qlcnic_dcb_enable(adapter->dcb);
 	qlcnic_83xx_initialize_nic(adapter, 1);
+	qlcnic_dcb_get_info(adapter->dcb);
 
 	/* Configure default, SR-IOV or Virtual NIC mode of operation */
 	err = qlcnic_83xx_configure_opmode(adapter);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index 64dcbf33d8f0..c1e11f5715b0 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
@@ -883,8 +883,6 @@ int qlcnic_82xx_get_nic_info(struct qlcnic_adapter *adapter,
 		npar_info->max_rx_ques = le16_to_cpu(nic_info->max_rx_ques);
 		npar_info->capabilities = le32_to_cpu(nic_info->capabilities);
 		npar_info->max_mtu = le16_to_cpu(nic_info->max_mtu);
-		adapter->max_tx_rings = npar_info->max_tx_ques;
-		adapter->max_sds_rings = npar_info->max_rx_ques;
 	}
 
 	qlcnic_free_mbx_args(&cmd);
@@ -1356,6 +1354,7 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter,
 			arg2 &= ~BIT_3;
 		break;
 	case QLCNIC_ADD_VLAN:
+			arg1 &= ~(0x0ffff << 16);
 			arg1 |= (BIT_2 | BIT_5);
 			arg1 |= (esw_cfg->vlan_id << 16);
 			break;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
index 7d4f54912bad..a51fe18f09a8 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
@@ -330,8 +330,6 @@ static int __qlcnic_dcb_attach(struct qlcnic_dcb *dcb)
 		goto out_free_cfg;
 	}
 
-	qlcnic_dcb_get_info(dcb);
-
 	return 0;
 out_free_cfg:
 	kfree(dcb->cfg);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 309d05640883..dbf75393f758 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -670,7 +670,7 @@ int qlcnic_setup_tss_rss_intr(struct qlcnic_adapter *adapter)
 	else
 		num_msix += adapter->drv_tx_rings;
 
-	if (adapter->drv_rss_rings  > 0)
+	if (adapter->drv_rss_rings > 0)
 		num_msix += adapter->drv_rss_rings;
 	else
 		num_msix += adapter->drv_sds_rings;
@@ -686,19 +686,15 @@ int qlcnic_setup_tss_rss_intr(struct qlcnic_adapter *adapter)
 			return -ENOMEM;
 	}
 
-restore:
 	for (vector = 0; vector < num_msix; vector++)
 		adapter->msix_entries[vector].entry = vector;
 
+restore:
 	err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
-	if (err == 0) {
-		adapter->ahw->num_msix = num_msix;
-		if (adapter->drv_tss_rings > 0)
-			adapter->drv_tx_rings = adapter->drv_tss_rings;
+	if (err > 0) {
+		if (!adapter->drv_tss_rings && !adapter->drv_rss_rings)
+			return -ENOSPC;
 
-		if (adapter->drv_rss_rings > 0)
-			adapter->drv_sds_rings = adapter->drv_rss_rings;
-	} else {
 		netdev_info(adapter->netdev,
 			    "Unable to allocate %d MSI-X vectors, Available vectors %d\n",
 			    num_msix, err);
@@ -716,12 +712,20 @@ restore:
 			    "Restoring %d Tx, %d SDS rings for total %d vectors.\n",
 			    adapter->drv_tx_rings, adapter->drv_sds_rings,
 			    num_msix);
-		goto restore;
 
-		err = -EIO;
+		goto restore;
+	} else if (err < 0) {
+		return err;
 	}
 
-	return err;
+	adapter->ahw->num_msix = num_msix;
+	if (adapter->drv_tss_rings > 0)
+		adapter->drv_tx_rings = adapter->drv_tss_rings;
+
+	if (adapter->drv_rss_rings > 0)
+		adapter->drv_sds_rings = adapter->drv_rss_rings;
+
+	return 0;
 }
 
 int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
@@ -2528,8 +2532,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_free_hw;
 	}
 
-	qlcnic_dcb_enable(adapter->dcb);
-
 	if (qlcnic_read_mac_addr(adapter))
 		dev_warn(&pdev->dev, "failed to read mac addr\n");
 
@@ -2549,7 +2551,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			 "Device does not support MSI interrupts\n");
 
 	if (qlcnic_82xx_check(adapter)) {
+		qlcnic_dcb_enable(adapter->dcb);
+		qlcnic_dcb_get_info(adapter->dcb);
 		err = qlcnic_setup_intr(adapter);
+
 		if (err) {
 			dev_err(&pdev->dev, "Failed to setup interrupt\n");
 			goto err_out_disable_msi;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
index 14f748cbf0de..280137991544 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
@@ -461,6 +461,16 @@ static int qlcnic_pci_sriov_disable(struct qlcnic_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 
+	if (pci_vfs_assigned(adapter->pdev)) {
+		netdev_err(adapter->netdev,
+			   "SR-IOV VFs belonging to port %d are assigned to VMs. SR-IOV can not be disabled on this port\n",
+			   adapter->portnum);
+		netdev_info(adapter->netdev,
+			    "Please detach SR-IOV VFs belonging to port %d from VMs, and then try to disable SR-IOV on this port\n",
+			    adapter->portnum);
+		return -EPERM;
+	}
+
 	rtnl_lock();
 	if (netif_running(netdev))
 		__qlcnic_down(adapter, netdev);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index 448d156c3d08..cd346e27f2e1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -354,7 +354,7 @@ int qlcnic_is_valid_nic_func(struct qlcnic_adapter *adapter, u8 pci_func)
 {
 	int i;
 
-	for (i = 0; i < adapter->ahw->max_vnic_func; i++) {
+	for (i = 0; i < adapter->ahw->total_nic_func; i++) {
 		if (adapter->npars[i].pci_func == pci_func)
 			return i;
 	}
@@ -720,6 +720,7 @@ static ssize_t qlcnic_sysfs_read_npar_config(struct file *file,
 	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
 	struct qlcnic_npar_func_cfg *np_cfg;
 	struct qlcnic_info nic_info;
+	u8 pci_func;
 	int i, ret;
 	u32 count;
 
@@ -729,26 +730,28 @@ static ssize_t qlcnic_sysfs_read_npar_config(struct file *file,
 
 	count = size / sizeof(struct qlcnic_npar_func_cfg);
 	for (i = 0; i < adapter->ahw->total_nic_func; i++) {
-		if (qlcnic_is_valid_nic_func(adapter, i) < 0)
-			continue;
 		if (adapter->npars[i].pci_func >= count) {
 			dev_dbg(dev, "%s: Total nic functions[%d], App sent function count[%d]\n",
 				__func__, adapter->ahw->total_nic_func, count);
 			continue;
 		}
-		ret = qlcnic_get_nic_info(adapter, &nic_info, i);
-		if (ret)
-			return ret;
 		if (!adapter->npars[i].eswitch_status)
 			continue;
-		np_cfg[i].pci_func = i;
-		np_cfg[i].op_mode = (u8)nic_info.op_mode;
-		np_cfg[i].port_num = nic_info.phys_port;
-		np_cfg[i].fw_capab = nic_info.capabilities;
-		np_cfg[i].min_bw = nic_info.min_tx_bw;
-		np_cfg[i].max_bw = nic_info.max_tx_bw;
-		np_cfg[i].max_tx_queues = nic_info.max_tx_ques;
-		np_cfg[i].max_rx_queues = nic_info.max_rx_ques;
+		pci_func = adapter->npars[i].pci_func;
+		if (qlcnic_is_valid_nic_func(adapter, pci_func) < 0)
+			continue;
+		ret = qlcnic_get_nic_info(adapter, &nic_info, pci_func);
+		if (ret)
+			return ret;
+
+		np_cfg[pci_func].pci_func = pci_func;
+		np_cfg[pci_func].op_mode = (u8)nic_info.op_mode;
+		np_cfg[pci_func].port_num = nic_info.phys_port;
+		np_cfg[pci_func].fw_capab = nic_info.capabilities;
+		np_cfg[pci_func].min_bw = nic_info.min_tx_bw;
+		np_cfg[pci_func].max_bw = nic_info.max_tx_bw;
+		np_cfg[pci_func].max_tx_queues = nic_info.max_tx_ques;
+		np_cfg[pci_func].max_rx_queues = nic_info.max_rx_ques;
 	}
 	return size;
 }
diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 21c20ea0dad0..b5ed30a39144 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -738,8 +738,11 @@ static int efx_ef10_reset(struct efx_nic *efx, enum reset_type reset_type)
 	/* If it was a port reset, trigger reallocation of MC resources.
 	 * Note that on an MC reset nothing needs to be done now because we'll
 	 * detect the MC reset later and handle it then.
+	 * For an FLR, we never get an MC reset event, but the MC has reset all
+	 * resources assigned to us, so we have to trigger reallocation now.
 	 */
-	if (reset_type == RESET_TYPE_ALL && !rc)
+	if ((reset_type == RESET_TYPE_ALL ||
+	     reset_type == RESET_TYPE_MCDI_TIMEOUT) && !rc)
 		efx_ef10_reset_mc_allocations(efx);
 	return rc;
 }
@@ -2141,6 +2144,11 @@ static int efx_ef10_fini_dmaq(struct efx_nic *efx)
 	return 0;
 }
 
+static void efx_ef10_prepare_flr(struct efx_nic *efx)
+{
+	atomic_set(&efx->active_queues, 0);
+}
+
 static bool efx_ef10_filter_equal(const struct efx_filter_spec *left,
 				  const struct efx_filter_spec *right)
 {
@@ -3603,6 +3611,8 @@ const struct efx_nic_type efx_hunt_a0_nic_type = {
 	.probe_port = efx_mcdi_port_probe,
 	.remove_port = efx_mcdi_port_remove,
 	.fini_dmaq = efx_ef10_fini_dmaq,
+	.prepare_flr = efx_ef10_prepare_flr,
+	.finish_flr = efx_port_dummy_op_void,
 	.describe_stats = efx_ef10_describe_stats,
 	.update_stats = efx_ef10_update_stats,
 	.start_stats = efx_mcdi_mac_start_stats,
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 57b971e5e6b2..63d595fd3cc5 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -76,6 +76,7 @@ const char *const efx_reset_type_names[] = {
 	[RESET_TYPE_RECOVER_OR_ALL]     = "RECOVER_OR_ALL",
 	[RESET_TYPE_WORLD]              = "WORLD",
 	[RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE",
+	[RESET_TYPE_MC_BIST]		= "MC_BIST",
 	[RESET_TYPE_DISABLE]            = "DISABLE",
 	[RESET_TYPE_TX_WATCHDOG]        = "TX_WATCHDOG",
 	[RESET_TYPE_INT_ERROR]          = "INT_ERROR",
@@ -83,7 +84,7 @@ const char *const efx_reset_type_names[] = {
 	[RESET_TYPE_DMA_ERROR]          = "DMA_ERROR",
 	[RESET_TYPE_TX_SKIP]            = "TX_SKIP",
 	[RESET_TYPE_MC_FAILURE]         = "MC_FAILURE",
-	[RESET_TYPE_MC_BIST]		= "MC_BIST",
+	[RESET_TYPE_MCDI_TIMEOUT]	= "MCDI_TIMEOUT (FLR)",
 };
 
 /* Reset workqueue. If any NIC has a hardware failure then a reset will be
@@ -1739,7 +1740,8 @@ static void efx_start_all(struct efx_nic *efx)
 
 	/* Check that it is appropriate to restart the interface. All
 	 * of these flags are safe to read under just the rtnl lock */
-	if (efx->port_enabled || !netif_running(efx->net_dev))
+	if (efx->port_enabled || !netif_running(efx->net_dev) ||
+	    efx->reset_pending)
 		return;
 
 	efx_start_port(efx);
@@ -2334,6 +2336,9 @@ void efx_reset_down(struct efx_nic *efx, enum reset_type method)
 {
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
+	if (method == RESET_TYPE_MCDI_TIMEOUT)
+		efx->type->prepare_flr(efx);
+
 	efx_stop_all(efx);
 	efx_disable_interrupts(efx);
 
@@ -2354,6 +2359,10 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok)
 
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
+	if (method == RESET_TYPE_MCDI_TIMEOUT)
+		efx->type->finish_flr(efx);
+
+	/* Ensure that SRAM is initialised even if we're disabling the device */
 	rc = efx->type->init(efx);
 	if (rc) {
 		netif_err(efx, drv, efx->net_dev, "failed to initialise NIC\n");
@@ -2417,7 +2426,10 @@ int efx_reset(struct efx_nic *efx, enum reset_type method)
 	/* Clear flags for the scopes we covered.  We assume the NIC and
 	 * driver are now quiescent so that there is no race here.
 	 */
-	efx->reset_pending &= -(1 << (method + 1));
+	if (method < RESET_TYPE_MAX_METHOD)
+		efx->reset_pending &= -(1 << (method + 1));
+	else /* it doesn't fit into the well-ordered scope hierarchy */
+		__clear_bit(method, &efx->reset_pending);
 
 	/* Reinitialise bus-mastering, which may have been turned off before
 	 * the reset was scheduled. This is still appropriate, even in the
@@ -2546,6 +2558,7 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
 	case RESET_TYPE_DISABLE:
 	case RESET_TYPE_RECOVER_OR_DISABLE:
 	case RESET_TYPE_MC_BIST:
+	case RESET_TYPE_MCDI_TIMEOUT:
 		method = type;
 		netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n",
 			  RESET_TYPE(method));
diff --git a/drivers/net/ethernet/sfc/enum.h b/drivers/net/ethernet/sfc/enum.h
index 75ef7ef6450b..d1dbb5fb31bb 100644
--- a/drivers/net/ethernet/sfc/enum.h
+++ b/drivers/net/ethernet/sfc/enum.h
@@ -143,6 +143,7 @@ enum efx_loopback_mode {
  * @RESET_TYPE_WORLD: Reset as much as possible
  * @RESET_TYPE_RECOVER_OR_DISABLE: Try to recover. Apply RESET_TYPE_DISABLE if
  * unsuccessful.
+ * @RESET_TYPE_MC_BIST: MC entering BIST mode.
  * @RESET_TYPE_DISABLE: Reset datapath, MAC and PHY; leave NIC disabled
  * @RESET_TYPE_TX_WATCHDOG: reset due to TX watchdog
  * @RESET_TYPE_INT_ERROR: reset due to internal error
@@ -150,14 +151,16 @@ enum efx_loopback_mode {
  * @RESET_TYPE_DMA_ERROR: DMA error
  * @RESET_TYPE_TX_SKIP: hardware completed empty tx descriptors
  * @RESET_TYPE_MC_FAILURE: MC reboot/assertion
+ * @RESET_TYPE_MCDI_TIMEOUT: MCDI timeout.
  */
 enum reset_type {
-	RESET_TYPE_INVISIBLE = 0,
-	RESET_TYPE_RECOVER_OR_ALL = 1,
-	RESET_TYPE_ALL = 2,
-	RESET_TYPE_WORLD = 3,
-	RESET_TYPE_RECOVER_OR_DISABLE = 4,
-	RESET_TYPE_DISABLE = 5,
+	RESET_TYPE_INVISIBLE,
+	RESET_TYPE_RECOVER_OR_ALL,
+	RESET_TYPE_ALL,
+	RESET_TYPE_WORLD,
+	RESET_TYPE_RECOVER_OR_DISABLE,
+	RESET_TYPE_MC_BIST,
+	RESET_TYPE_DISABLE,
 	RESET_TYPE_MAX_METHOD,
 	RESET_TYPE_TX_WATCHDOG,
 	RESET_TYPE_INT_ERROR,
@@ -165,7 +168,13 @@ enum reset_type {
 	RESET_TYPE_DMA_ERROR,
 	RESET_TYPE_TX_SKIP,
 	RESET_TYPE_MC_FAILURE,
-	RESET_TYPE_MC_BIST,
+	/* RESET_TYPE_MCDI_TIMEOUT is actually a method, not just a reason, but
+	 * it doesn't fit the scope hierarchy (not well-ordered by inclusion).
+	 * We encode this by having its enum value be greater than
+	 * RESET_TYPE_MAX_METHOD. This also prevents issuing it with
+	 * efx_ioctl_reset.
+	 */
+	RESET_TYPE_MCDI_TIMEOUT,
 	RESET_TYPE_MAX,
 };
 
diff --git a/drivers/net/ethernet/sfc/falcon.c b/drivers/net/ethernet/sfc/falcon.c
index 8ec20b713cc6..fae25a418647 100644
--- a/drivers/net/ethernet/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
@@ -2696,6 +2696,8 @@ const struct efx_nic_type falcon_a1_nic_type = {
 	.fini_dmaq = efx_farch_fini_dmaq,
 	.prepare_flush = falcon_prepare_flush,
 	.finish_flush = efx_port_dummy_op_void,
+	.prepare_flr = efx_port_dummy_op_void,
+	.finish_flr = efx_farch_finish_flr,
 	.describe_stats = falcon_describe_nic_stats,
 	.update_stats = falcon_update_nic_stats,
 	.start_stats = falcon_start_nic_stats,
@@ -2790,6 +2792,8 @@ const struct efx_nic_type falcon_b0_nic_type = {
 	.fini_dmaq = efx_farch_fini_dmaq,
 	.prepare_flush = falcon_prepare_flush,
 	.finish_flush = efx_port_dummy_op_void,
+	.prepare_flr = efx_port_dummy_op_void,
+	.finish_flr = efx_farch_finish_flr,
 	.describe_stats = falcon_describe_nic_stats,
 	.update_stats = falcon_update_nic_stats,
 	.start_stats = falcon_start_nic_stats,
diff --git a/drivers/net/ethernet/sfc/farch.c b/drivers/net/ethernet/sfc/farch.c
index a08761360cdf..0537381cd2f6 100644
--- a/drivers/net/ethernet/sfc/farch.c
+++ b/drivers/net/ethernet/sfc/farch.c
@@ -741,6 +741,28 @@ int efx_farch_fini_dmaq(struct efx_nic *efx)
 	return rc;
 }
 
+/* Reset queue and flush accounting after FLR
+ *
+ * One possible cause of FLR recovery is that DMA may be failing (eg. if bus
+ * mastering was disabled), in which case we don't receive (RXQ) flush
+ * completion events.  This means that efx->rxq_flush_outstanding remained at 4
+ * after the FLR; also, efx->active_queues was non-zero (as no flush completion
+ * events were received, and we didn't go through efx_check_tx_flush_complete())
+ * If we don't fix this up, on the next call to efx_realloc_channels() we won't
+ * flush any RX queues because efx->rxq_flush_outstanding is at the limit of 4
+ * for batched flush requests; and the efx->active_queues gets messed up because
+ * we keep incrementing for the newly initialised queues, but it never went to
+ * zero previously.  Then we get a timeout every time we try to restart the
+ * queues, as it doesn't go back to zero when we should be flushing the queues.
+ */
+void efx_farch_finish_flr(struct efx_nic *efx)
+{
+	atomic_set(&efx->rxq_flush_pending, 0);
+	atomic_set(&efx->rxq_flush_outstanding, 0);
+	atomic_set(&efx->active_queues, 0);
+}
+
+
 /**************************************************************************
  *
  * Event queue processing
diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c
index 7bd4b14bf3b3..5239cf9bdc56 100644
--- a/drivers/net/ethernet/sfc/mcdi.c
+++ b/drivers/net/ethernet/sfc/mcdi.c
@@ -52,12 +52,7 @@ static void efx_mcdi_timeout_async(unsigned long context);
 static int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating,
 			       bool *was_attached_out);
 static bool efx_mcdi_poll_once(struct efx_nic *efx);
-
-static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx)
-{
-	EFX_BUG_ON_PARANOID(!efx->mcdi);
-	return &efx->mcdi->iface;
-}
+static void efx_mcdi_abandon(struct efx_nic *efx);
 
 int efx_mcdi_init(struct efx_nic *efx)
 {
@@ -558,6 +553,8 @@ static int _efx_mcdi_rpc_finish(struct efx_nic *efx, unsigned cmd, size_t inlen,
 			rc = 0;
 		}
 
+		efx_mcdi_abandon(efx);
+
 		/* Close the race with efx_mcdi_ev_cpl() executing just too late
 		 * and completing a request we've just cancelled, by ensuring
 		 * that the seqno check therein fails.
@@ -672,6 +669,9 @@ int efx_mcdi_rpc_start(struct efx_nic *efx, unsigned cmd,
 	if (efx->mc_bist_for_other_fn)
 		return -ENETDOWN;
 
+	if (mcdi->mode == MCDI_MODE_FAIL)
+		return -ENETDOWN;
+
 	efx_mcdi_acquire_sync(mcdi);
 	efx_mcdi_send_request(efx, cmd, inbuf, inlen);
 	return 0;
@@ -812,7 +812,11 @@ void efx_mcdi_mode_poll(struct efx_nic *efx)
 		return;
 
 	mcdi = efx_mcdi(efx);
-	if (mcdi->mode == MCDI_MODE_POLL)
+	/* If already in polling mode, nothing to do.
+	 * If in fail-fast state, don't switch to polled completion.
+	 * FLR recovery will do that later.
+	 */
+	if (mcdi->mode == MCDI_MODE_POLL || mcdi->mode == MCDI_MODE_FAIL)
 		return;
 
 	/* We can switch from event completion to polled completion, because
@@ -841,8 +845,8 @@ void efx_mcdi_flush_async(struct efx_nic *efx)
 
 	mcdi = efx_mcdi(efx);
 
-	/* We must be in polling mode so no more requests can be queued */
-	BUG_ON(mcdi->mode != MCDI_MODE_POLL);
+	/* We must be in poll or fail mode so no more requests can be queued */
+	BUG_ON(mcdi->mode == MCDI_MODE_EVENTS);
 
 	del_timer_sync(&mcdi->async_timer);
 
@@ -875,8 +879,11 @@ void efx_mcdi_mode_event(struct efx_nic *efx)
 		return;
 
 	mcdi = efx_mcdi(efx);
-
-	if (mcdi->mode == MCDI_MODE_EVENTS)
+	/* If already in event completion mode, nothing to do.
+	 * If in fail-fast state, don't switch to event completion.  FLR
+	 * recovery will do that later.
+	 */
+	if (mcdi->mode == MCDI_MODE_EVENTS || mcdi->mode == MCDI_MODE_FAIL)
 		return;
 
 	/* We can't switch from polled to event completion in the middle of a
@@ -966,6 +973,19 @@ static void efx_mcdi_ev_bist(struct efx_nic *efx)
 	spin_unlock(&mcdi->iface_lock);
 }
 
+/* MCDI timeouts seen, so make all MCDI calls fail-fast and issue an FLR to try
+ * to recover.
+ */
+static void efx_mcdi_abandon(struct efx_nic *efx)
+{
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+
+	if (xchg(&mcdi->mode, MCDI_MODE_FAIL) == MCDI_MODE_FAIL)
+		return; /* it had already been done */
+	netif_dbg(efx, hw, efx->net_dev, "MCDI is timing out; trying to recover\n");
+	efx_schedule_reset(efx, RESET_TYPE_MCDI_TIMEOUT);
+}
+
 /* Called from  falcon_process_eventq for MCDI events */
 void efx_mcdi_process_event(struct efx_channel *channel,
 			    efx_qword_t *event)
@@ -1512,6 +1532,19 @@ int efx_mcdi_reset(struct efx_nic *efx, enum reset_type method)
 {
 	int rc;
 
+	/* If MCDI is down, we can't handle_assertion */
+	if (method == RESET_TYPE_MCDI_TIMEOUT) {
+		rc = pci_reset_function(efx->pci_dev);
+		if (rc)
+			return rc;
+		/* Re-enable polled MCDI completion */
+		if (efx->mcdi) {
+			struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+			mcdi->mode = MCDI_MODE_POLL;
+		}
+		return 0;
+	}
+
 	/* Recover from a failed assertion pre-reset */
 	rc = efx_mcdi_handle_assertion(efx);
 	if (rc)
diff --git a/drivers/net/ethernet/sfc/mcdi.h b/drivers/net/ethernet/sfc/mcdi.h
index 52931aebf3c3..56465f7465a2 100644
--- a/drivers/net/ethernet/sfc/mcdi.h
+++ b/drivers/net/ethernet/sfc/mcdi.h
@@ -28,9 +28,16 @@ enum efx_mcdi_state {
 	MCDI_STATE_COMPLETED,
 };
 
+/**
+ * enum efx_mcdi_mode - MCDI transaction mode
+ * @MCDI_MODE_POLL: poll for MCDI completion, until timeout
+ * @MCDI_MODE_EVENTS: wait for an mcdi_event.  On timeout, poll once
+ * @MCDI_MODE_FAIL: we think MCDI is dead, so fail-fast all calls
+ */
 enum efx_mcdi_mode {
 	MCDI_MODE_POLL,
 	MCDI_MODE_EVENTS,
+	MCDI_MODE_FAIL,
 };
 
 /**
@@ -104,6 +111,12 @@ struct efx_mcdi_data {
 	u32 fn_flags;
 };
 
+static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx)
+{
+	EFX_BUG_ON_PARANOID(!efx->mcdi);
+	return &efx->mcdi->iface;
+}
+
 #ifdef CONFIG_SFC_MCDI_MON
 static inline struct efx_mcdi_mon *efx_mcdi_mon(struct efx_nic *efx)
 {
diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index 8a400a0595eb..5bdae8ed7c57 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -972,6 +972,8 @@ struct efx_mtd_partition {
  *	(for Falcon architecture)
  * @finish_flush: Clean up after flushing the DMA queues (for Falcon
  *	architecture)
+ * @prepare_flr: Prepare for an FLR
+ * @finish_flr: Clean up after an FLR
  * @describe_stats: Describe statistics for ethtool
  * @update_stats: Update statistics not provided by event handling.
  *	Either argument may be %NULL.
@@ -1100,6 +1102,8 @@ struct efx_nic_type {
 	int (*fini_dmaq)(struct efx_nic *efx);
 	void (*prepare_flush)(struct efx_nic *efx);
 	void (*finish_flush)(struct efx_nic *efx);
+	void (*prepare_flr)(struct efx_nic *efx);
+	void (*finish_flr)(struct efx_nic *efx);
 	size_t (*describe_stats)(struct efx_nic *efx, u8 *names);
 	size_t (*update_stats)(struct efx_nic *efx, u64 *full_stats,
 			       struct rtnl_link_stats64 *core_stats);
diff --git a/drivers/net/ethernet/sfc/nic.h b/drivers/net/ethernet/sfc/nic.h
index a001fae1a8d7..d3ad8ed8d901 100644
--- a/drivers/net/ethernet/sfc/nic.h
+++ b/drivers/net/ethernet/sfc/nic.h
@@ -757,6 +757,7 @@ static inline int efx_nic_irq_test_irq_cpu(struct efx_nic *efx)
 int efx_nic_flush_queues(struct efx_nic *efx);
 void siena_prepare_flush(struct efx_nic *efx);
 int efx_farch_fini_dmaq(struct efx_nic *efx);
+void efx_farch_finish_flr(struct efx_nic *efx);
 void siena_finish_flush(struct efx_nic *efx);
 void falcon_start_nic_stats(struct efx_nic *efx);
 void falcon_stop_nic_stats(struct efx_nic *efx);
diff --git a/drivers/net/ethernet/sfc/siena.c b/drivers/net/ethernet/sfc/siena.c
index 23f3a6f7737a..50ffefed492c 100644
--- a/drivers/net/ethernet/sfc/siena.c
+++ b/drivers/net/ethernet/sfc/siena.c
@@ -921,6 +921,8 @@ const struct efx_nic_type siena_a0_nic_type = {
 	.fini_dmaq = efx_farch_fini_dmaq,
 	.prepare_flush = siena_prepare_flush,
 	.finish_flush = siena_finish_flush,
+	.prepare_flr = efx_port_dummy_op_void,
+	.finish_flr = efx_farch_finish_flr,
 	.describe_stats = siena_describe_nic_stats,
 	.update_stats = siena_update_nic_stats,
 	.start_stats = efx_mcdi_mac_start_stats,
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 430bb0db9bc4..e36f194673a4 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -365,7 +365,7 @@ __at86rf230_read_subreg(struct at86rf230_local *lp,
 	dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
 
 	if (status == 0)
-		*data = buf[1];
+		*data = (buf[1] & mask) >> shift;
 
 	return status;
 }
@@ -1025,14 +1025,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 		return -EINVAL;
 	}
 
-	rc = at86rf230_read_subreg(lp, SR_AVDD_OK, &status);
-	if (rc)
-		return rc;
-	if (!status) {
-		dev_err(&lp->spi->dev, "AVDD error\n");
-		return -EINVAL;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index e701433bf52f..9c4defdec67b 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -32,29 +32,39 @@
 
 struct mdio_gpio_info {
 	struct mdiobb_ctrl ctrl;
-	int mdc, mdio;
+	int mdc, mdio, mdo;
+	int mdc_active_low, mdio_active_low, mdo_active_low;
 };
 
 static void *mdio_gpio_of_get_data(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct mdio_gpio_platform_data *pdata;
+	enum of_gpio_flags flags;
 	int ret;
 
 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return NULL;
 
-	ret = of_get_gpio(np, 0);
+	ret = of_get_gpio_flags(np, 0, &flags);
 	if (ret < 0)
 		return NULL;
 
 	pdata->mdc = ret;
+	pdata->mdc_active_low = flags & OF_GPIO_ACTIVE_LOW;
 
-	ret = of_get_gpio(np, 1);
+	ret = of_get_gpio_flags(np, 1, &flags);
 	if (ret < 0)
 		return NULL;
 	pdata->mdio = ret;
+	pdata->mdio_active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+	ret = of_get_gpio_flags(np, 2, &flags);
+	if (ret > 0) {
+		pdata->mdo = ret;
+		pdata->mdo_active_low = flags & OF_GPIO_ACTIVE_LOW;
+	}
 
 	return pdata;
 }
@@ -64,8 +74,19 @@ static void mdio_dir(struct mdiobb_ctrl *ctrl, int dir)
 	struct mdio_gpio_info *bitbang =
 		container_of(ctrl, struct mdio_gpio_info, ctrl);
 
+	if (bitbang->mdo) {
+		/* Separate output pin. Always set its value to high
+		 * when changing direction. If direction is input,
+		 * assume the pin serves as pull-up. If direction is
+		 * output, the default value is high.
+		 */
+		gpio_set_value(bitbang->mdo, 1 ^ bitbang->mdo_active_low);
+		return;
+	}
+
 	if (dir)
-		gpio_direction_output(bitbang->mdio, 1);
+		gpio_direction_output(bitbang->mdio,
+				      1 ^ bitbang->mdio_active_low);
 	else
 		gpio_direction_input(bitbang->mdio);
 }
@@ -75,7 +96,7 @@ static int mdio_get(struct mdiobb_ctrl *ctrl)
 	struct mdio_gpio_info *bitbang =
 		container_of(ctrl, struct mdio_gpio_info, ctrl);
 
-	return gpio_get_value(bitbang->mdio);
+	return gpio_get_value(bitbang->mdio) ^ bitbang->mdio_active_low;
 }
 
 static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
@@ -83,7 +104,10 @@ static void mdio_set(struct mdiobb_ctrl *ctrl, int what)
 	struct mdio_gpio_info *bitbang =
 		container_of(ctrl, struct mdio_gpio_info, ctrl);
 
-	gpio_set_value(bitbang->mdio, what);
+	if (bitbang->mdo)
+		gpio_set_value(bitbang->mdo, what ^ bitbang->mdo_active_low);
+	else
+		gpio_set_value(bitbang->mdio, what ^ bitbang->mdio_active_low);
 }
 
 static void mdc_set(struct mdiobb_ctrl *ctrl, int what)
@@ -91,7 +115,7 @@ static void mdc_set(struct mdiobb_ctrl *ctrl, int what)
 	struct mdio_gpio_info *bitbang =
 		container_of(ctrl, struct mdio_gpio_info, ctrl);
 
-	gpio_set_value(bitbang->mdc, what);
+	gpio_set_value(bitbang->mdc, what ^ bitbang->mdc_active_low);
 }
 
 static struct mdiobb_ops mdio_gpio_ops = {
@@ -110,18 +134,22 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
 	struct mdio_gpio_info *bitbang;
 	int i;
 
-	bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL);
+	bitbang = devm_kzalloc(dev, sizeof(*bitbang), GFP_KERNEL);
 	if (!bitbang)
 		goto out;
 
 	bitbang->ctrl.ops = &mdio_gpio_ops;
 	bitbang->ctrl.reset = pdata->reset;
 	bitbang->mdc = pdata->mdc;
+	bitbang->mdc_active_low = pdata->mdc_active_low;
 	bitbang->mdio = pdata->mdio;
+	bitbang->mdio_active_low = pdata->mdio_active_low;
+	bitbang->mdo = pdata->mdo;
+	bitbang->mdo_active_low = pdata->mdo_active_low;
 
 	new_bus = alloc_mdio_bitbang(&bitbang->ctrl);
 	if (!new_bus)
-		goto out_free_bitbang;
+		goto out;
 
 	new_bus->name = "GPIO Bitbanged MDIO",
 
@@ -138,11 +166,18 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
 
 	snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id);
 
-	if (gpio_request(bitbang->mdc, "mdc"))
+	if (devm_gpio_request(dev, bitbang->mdc, "mdc"))
+		goto out_free_bus;
+
+	if (devm_gpio_request(dev, bitbang->mdio, "mdio"))
 		goto out_free_bus;
 
-	if (gpio_request(bitbang->mdio, "mdio"))
-		goto out_free_mdc;
+	if (bitbang->mdo) {
+		if (devm_gpio_request(dev, bitbang->mdo, "mdo"))
+			goto out_free_bus;
+		gpio_direction_output(bitbang->mdo, 1);
+		gpio_direction_input(bitbang->mdio);
+	}
 
 	gpio_direction_output(bitbang->mdc, 0);
 
@@ -150,12 +185,8 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
 
 	return new_bus;
 
-out_free_mdc:
-	gpio_free(bitbang->mdc);
 out_free_bus:
 	free_mdio_bitbang(new_bus);
-out_free_bitbang:
-	kfree(bitbang);
 out:
 	return NULL;
 }
@@ -163,13 +194,8 @@ out:
 static void mdio_gpio_bus_deinit(struct device *dev)
 {
 	struct mii_bus *bus = dev_get_drvdata(dev);
-	struct mdio_gpio_info *bitbang = bus->priv;
 
-	dev_set_drvdata(dev, NULL);
-	gpio_free(bitbang->mdio);
-	gpio_free(bitbang->mdc);
 	free_mdio_bitbang(bus);
-	kfree(bitbang);
 }
 
 static void mdio_gpio_bus_destroy(struct device *dev)
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index c55e316373a1..82355d5d155a 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1755,8 +1755,8 @@ int vxlan_xmit_skb(struct vxlan_sock *vs,
 	if (err)
 		return err;
 
-	return iptunnel_xmit(rt, skb, src, dst, IPPROTO_UDP, tos, ttl, df,
-			     false);
+	return iptunnel_xmit(vs->sock->sk, rt, skb, src, dst, IPPROTO_UDP,
+			     tos, ttl, df, false);
 }
 EXPORT_SYMBOL_GPL(vxlan_xmit_skb);
 
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 84734a805092..83c39e2858bf 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -1521,11 +1521,7 @@ static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
 	cosa_putstatus(cosa, 0);
 	cosa_getdata8(cosa);
 	cosa_putstatus(cosa, SR_RST);
-#ifdef MODULE
 	msleep(500);
-#else
-	udelay(5*100000);
-#endif
 	/* Disable all IRQs from the card */
 	cosa_putstatus(cosa, 0);
 
diff --git a/drivers/net/wireless/cw1200/debug.c b/drivers/net/wireless/cw1200/debug.c
index e323b4d54338..34f97c31eecf 100644
--- a/drivers/net/wireless/cw1200/debug.c
+++ b/drivers/net/wireless/cw1200/debug.c
@@ -41,6 +41,8 @@ static const char * const cw1200_debug_link_id[] = {
 	"REQ",
 	"SOFT",
 	"HARD",
+	"RESET",
+	"RESET_REMAP",
 };
 
 static const char *cw1200_debug_mode(int mode)
diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c
index 003a546571d4..4c2d4ef28b22 100644
--- a/drivers/net/wireless/iwlwifi/iwl-7000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-7000.c
@@ -67,8 +67,8 @@
 #include "iwl-agn-hw.h"
 
 /* Highest firmware API version supported */
-#define IWL7260_UCODE_API_MAX	8
-#define IWL3160_UCODE_API_MAX	8
+#define IWL7260_UCODE_API_MAX	9
+#define IWL3160_UCODE_API_MAX	9
 
 /* Oldest version we won't warn about */
 #define IWL7260_UCODE_API_OK	8
@@ -244,3 +244,4 @@ const struct iwl_cfg iwl7265_n_cfg = {
 
 MODULE_FIRMWARE(IWL7260_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
 MODULE_FIRMWARE(IWL3160_MODULE_FIRMWARE(IWL3160_UCODE_API_OK));
+MODULE_FIRMWARE(IWL7265_MODULE_FIRMWARE(IWL7260_UCODE_API_OK));
diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index 685f7e8e6943..fa858d548d13 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -190,7 +190,7 @@ static const __le32 iwl_combined_lookup[BT_COEX_MAX_LUT][BT_COEX_LUT_SIZE] = {
 		cpu_to_le32(0xcc00aaaa),
 		cpu_to_le32(0x0000aaaa),
 		cpu_to_le32(0xc0004000),
-		cpu_to_le32(0x00000000),
+		cpu_to_le32(0x00004000),
 		cpu_to_le32(0xf0005000),
 		cpu_to_le32(0xf0005000),
 	},
@@ -213,16 +213,16 @@ static const __le32 iwl_combined_lookup[BT_COEX_MAX_LUT][BT_COEX_LUT_SIZE] = {
 		/* Tx Tx disabled */
 		cpu_to_le32(0xaaaaaaaa),
 		cpu_to_le32(0xaaaaaaaa),
-		cpu_to_le32(0xaaaaaaaa),
+		cpu_to_le32(0xeeaaaaaa),
 		cpu_to_le32(0xaaaaaaaa),
 		cpu_to_le32(0xcc00ff28),
 		cpu_to_le32(0x0000aaaa),
 		cpu_to_le32(0xcc00aaaa),
 		cpu_to_le32(0x0000aaaa),
-		cpu_to_le32(0xC0004000),
-		cpu_to_le32(0xC0004000),
-		cpu_to_le32(0xF0005000),
-		cpu_to_le32(0xF0005000),
+		cpu_to_le32(0xc0004000),
+		cpu_to_le32(0xc0004000),
+		cpu_to_le32(0xf0005000),
+		cpu_to_le32(0xf0005000),
 	},
 };
 
@@ -1262,6 +1262,7 @@ int iwl_mvm_rx_ant_coupling_notif(struct iwl_mvm *mvm,
 	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u32 ant_isolation = le32_to_cpup((void *)pkt->data);
 	u8 __maybe_unused lower_bound, upper_bound;
+	int ret;
 	u8 lut;
 
 	struct iwl_bt_coex_cmd *bt_cmd;
@@ -1318,5 +1319,8 @@ int iwl_mvm_rx_ant_coupling_notif(struct iwl_mvm *mvm,
 	memcpy(bt_cmd->bt4_corun_lut40, antenna_coupling_ranges[lut].lut20,
 	       sizeof(bt_cmd->bt4_corun_lut40));
 
-	return 0;
+	ret = iwl_mvm_send_cmd(mvm, &cmd);
+
+	kfree(bt_cmd);
+	return ret;
 }
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 4dd9ff43b8b6..f0cebf12c7b8 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1332,6 +1332,7 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm,
 		 */
 		iwl_mvm_remove_time_event(mvm, mvmvif,
 					  &mvmvif->time_event_data);
+		iwl_mvm_sf_update(mvm, vif, false);
 		WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif, CMD_SYNC));
 	} else if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS |
 			      BSS_CHANGED_QOS)) {
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 568abd61b14f..9f52c5b3f0ec 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -59,7 +59,7 @@
 /* max allowed rate miss before sync LQ cmd */
 #define IWL_MISSED_RATE_MAX		15
 #define RS_STAY_IN_COLUMN_TIMEOUT       (5*HZ)
-
+#define RS_IDLE_TIMEOUT                 (5*HZ)
 
 static u8 rs_ht_to_legacy[] = {
 	[IWL_RATE_MCS_0_INDEX] = IWL_RATE_6M_INDEX,
@@ -142,7 +142,7 @@ enum rs_column_mode {
 	RS_MIMO2,
 };
 
-#define MAX_NEXT_COLUMNS 5
+#define MAX_NEXT_COLUMNS 7
 #define MAX_COLUMN_CHECKS 3
 
 typedef bool (*allow_column_func_t) (struct iwl_mvm *mvm,
@@ -212,8 +212,10 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_LEGACY_ANT_B,
 			RS_COLUMN_SISO_ANT_A,
 			RS_COLUMN_SISO_ANT_B,
-			RS_COLUMN_MIMO2,
-			RS_COLUMN_MIMO2_SGI,
+			RS_COLUMN_INVALID,
+			RS_COLUMN_INVALID,
+			RS_COLUMN_INVALID,
+			RS_COLUMN_INVALID,
 		},
 	},
 	[RS_COLUMN_LEGACY_ANT_B] = {
@@ -223,8 +225,10 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_LEGACY_ANT_A,
 			RS_COLUMN_SISO_ANT_A,
 			RS_COLUMN_SISO_ANT_B,
-			RS_COLUMN_MIMO2,
-			RS_COLUMN_MIMO2_SGI,
+			RS_COLUMN_INVALID,
+			RS_COLUMN_INVALID,
+			RS_COLUMN_INVALID,
+			RS_COLUMN_INVALID,
 		},
 	},
 	[RS_COLUMN_SISO_ANT_A] = {
@@ -235,7 +239,9 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_MIMO2,
 			RS_COLUMN_SISO_ANT_A_SGI,
 			RS_COLUMN_SISO_ANT_B_SGI,
-			RS_COLUMN_MIMO2_SGI,
+			RS_COLUMN_LEGACY_ANT_A,
+			RS_COLUMN_LEGACY_ANT_B,
+			RS_COLUMN_INVALID,
 		},
 		.checks = {
 			rs_siso_allow,
@@ -249,7 +255,9 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_MIMO2,
 			RS_COLUMN_SISO_ANT_B_SGI,
 			RS_COLUMN_SISO_ANT_A_SGI,
-			RS_COLUMN_MIMO2_SGI,
+			RS_COLUMN_LEGACY_ANT_A,
+			RS_COLUMN_LEGACY_ANT_B,
+			RS_COLUMN_INVALID,
 		},
 		.checks = {
 			rs_siso_allow,
@@ -265,6 +273,8 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_SISO_ANT_A,
 			RS_COLUMN_SISO_ANT_B,
 			RS_COLUMN_MIMO2,
+			RS_COLUMN_LEGACY_ANT_A,
+			RS_COLUMN_LEGACY_ANT_B,
 		},
 		.checks = {
 			rs_siso_allow,
@@ -281,6 +291,8 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_SISO_ANT_B,
 			RS_COLUMN_SISO_ANT_A,
 			RS_COLUMN_MIMO2,
+			RS_COLUMN_LEGACY_ANT_A,
+			RS_COLUMN_LEGACY_ANT_B,
 		},
 		.checks = {
 			rs_siso_allow,
@@ -296,6 +308,8 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_SISO_ANT_A_SGI,
 			RS_COLUMN_SISO_ANT_B_SGI,
 			RS_COLUMN_MIMO2_SGI,
+			RS_COLUMN_LEGACY_ANT_A,
+			RS_COLUMN_LEGACY_ANT_B,
 		},
 		.checks = {
 			rs_mimo_allow,
@@ -311,6 +325,8 @@ static const struct rs_tx_column rs_tx_columns[] = {
 			RS_COLUMN_SISO_ANT_A,
 			RS_COLUMN_SISO_ANT_B,
 			RS_COLUMN_MIMO2,
+			RS_COLUMN_LEGACY_ANT_A,
+			RS_COLUMN_LEGACY_ANT_B,
 		},
 		.checks = {
 			rs_mimo_allow,
@@ -503,10 +519,12 @@ static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
 	window->average_tpt = IWL_INVALID_VALUE;
 }
 
-static void rs_rate_scale_clear_tbl_windows(struct iwl_scale_tbl_info *tbl)
+static void rs_rate_scale_clear_tbl_windows(struct iwl_mvm *mvm,
+					    struct iwl_scale_tbl_info *tbl)
 {
 	int i;
 
+	IWL_DEBUG_RATE(mvm, "Clearing up window stats\n");
 	for (i = 0; i < IWL_RATE_COUNT; i++)
 		rs_rate_scale_clear_window(&tbl->win[i]);
 }
@@ -992,6 +1010,13 @@ static void rs_tx_status(void *mvm_r, struct ieee80211_supported_band *sband,
 		return;
 	}
 
+#ifdef CPTCFG_MAC80211_DEBUGFS
+	/* Disable last tx check if we are debugging with fixed rate */
+	if (lq_sta->dbg_fixed_rate) {
+		IWL_DEBUG_RATE(mvm, "Fixed rate. avoid rate scaling\n");
+		return;
+	}
+#endif
 	if (!ieee80211_is_data(hdr->frame_control) ||
 	    info->flags & IEEE80211_TX_CTL_NO_ACK)
 		return;
@@ -1034,6 +1059,18 @@ static void rs_tx_status(void *mvm_r, struct ieee80211_supported_band *sband,
 			mac_index++;
 	}
 
+	if (time_after(jiffies,
+		       (unsigned long)(lq_sta->last_tx + RS_IDLE_TIMEOUT))) {
+		int tid;
+		IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n");
+		for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++)
+			ieee80211_stop_tx_ba_session(sta, tid);
+
+		iwl_mvm_rs_rate_init(mvm, sta, sband->band, false);
+		return;
+	}
+	lq_sta->last_tx = jiffies;
+
 	/* Here we actually compare this rate to the latest LQ command */
 	if ((mac_index < 0) ||
 	    (rate.sgi != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) ||
@@ -1186,9 +1223,26 @@ static void rs_set_stay_in_table(struct iwl_mvm *mvm, u8 is_legacy,
 	lq_sta->visited_columns = 0;
 }
 
+static int rs_get_max_allowed_rate(struct iwl_lq_sta *lq_sta,
+				   const struct rs_tx_column *column)
+{
+	switch (column->mode) {
+	case RS_LEGACY:
+		return lq_sta->max_legacy_rate_idx;
+	case RS_SISO:
+		return lq_sta->max_siso_rate_idx;
+	case RS_MIMO2:
+		return lq_sta->max_mimo2_rate_idx;
+	default:
+		WARN_ON_ONCE(1);
+	}
+
+	return lq_sta->max_legacy_rate_idx;
+}
+
 static const u16 *rs_get_expected_tpt_table(struct iwl_lq_sta *lq_sta,
-				      const struct rs_tx_column *column,
-				      u32 bw)
+					    const struct rs_tx_column *column,
+					    u32 bw)
 {
 	/* Used to choose among HT tables */
 	const u16 (*ht_tbl_pointer)[IWL_RATE_COUNT];
@@ -1438,7 +1492,7 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
 
 				IWL_DEBUG_RATE(mvm,
 					       "LQ: stay in table clear win\n");
-				rs_rate_scale_clear_tbl_windows(tbl);
+				rs_rate_scale_clear_tbl_windows(mvm, tbl);
 			}
 		}
 
@@ -1446,8 +1500,7 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
 		 * bitmaps and stats in active table (this will become the new
 		 * "search" table). */
 		if (lq_sta->rs_state == RS_STATE_SEARCH_CYCLE_STARTED) {
-			IWL_DEBUG_RATE(mvm, "Clearing up window stats\n");
-			rs_rate_scale_clear_tbl_windows(tbl);
+			rs_rate_scale_clear_tbl_windows(mvm, tbl);
 		}
 	}
 }
@@ -1485,14 +1538,14 @@ static enum rs_column rs_get_next_column(struct iwl_mvm *mvm,
 					 struct ieee80211_sta *sta,
 					 struct iwl_scale_tbl_info *tbl)
 {
-	int i, j, n;
+	int i, j, max_rate;
 	enum rs_column next_col_id;
 	const struct rs_tx_column *curr_col = &rs_tx_columns[tbl->column];
 	const struct rs_tx_column *next_col;
 	allow_column_func_t allow_func;
 	u8 valid_ants = mvm->fw->valid_tx_ant;
 	const u16 *expected_tpt_tbl;
-	s32 tpt, max_expected_tpt;
+	u16 tpt, max_expected_tpt;
 
 	for (i = 0; i < MAX_NEXT_COLUMNS; i++) {
 		next_col_id = curr_col->next_columns[i];
@@ -1535,11 +1588,11 @@ static enum rs_column rs_get_next_column(struct iwl_mvm *mvm,
 		if (WARN_ON_ONCE(!expected_tpt_tbl))
 			continue;
 
-		max_expected_tpt = 0;
-		for (n = 0; n < IWL_RATE_COUNT; n++)
-			if (expected_tpt_tbl[n] > max_expected_tpt)
-				max_expected_tpt = expected_tpt_tbl[n];
+		max_rate = rs_get_max_allowed_rate(lq_sta, next_col);
+		if (WARN_ON_ONCE(max_rate == IWL_RATE_INVALID))
+			continue;
 
+		max_expected_tpt = expected_tpt_tbl[max_rate];
 		if (tpt >= max_expected_tpt) {
 			IWL_DEBUG_RATE(mvm,
 				       "Skip column %d: can't beat current TPT. Max expected %d current %d\n",
@@ -1547,14 +1600,15 @@ static enum rs_column rs_get_next_column(struct iwl_mvm *mvm,
 			continue;
 		}
 
+		IWL_DEBUG_RATE(mvm,
+			       "Found potential column %d. Max expected %d current %d\n",
+			       next_col_id, max_expected_tpt, tpt);
 		break;
 	}
 
 	if (i == MAX_NEXT_COLUMNS)
 		return RS_COLUMN_INVALID;
 
-	IWL_DEBUG_RATE(mvm, "Found potential column %d\n", next_col_id);
-
 	return next_col_id;
 }
 
@@ -1640,85 +1694,76 @@ static enum rs_action rs_get_rate_action(struct iwl_mvm *mvm,
 {
 	enum rs_action action = RS_ACTION_STAY;
 
-	/* Too many failures, decrease rate */
 	if ((sr <= RS_SR_FORCE_DECREASE) || (current_tpt == 0)) {
 		IWL_DEBUG_RATE(mvm,
-			       "decrease rate because of low SR\n");
-		action = RS_ACTION_DOWNSCALE;
-	/* No throughput measured yet for adjacent rates; try increase. */
-	} else if ((low_tpt == IWL_INVALID_VALUE) &&
-		   (high_tpt == IWL_INVALID_VALUE)) {
-		if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) {
-			IWL_DEBUG_RATE(mvm,
-				       "Good SR and no high rate measurement. "
-				       "Increase rate\n");
-			action = RS_ACTION_UPSCALE;
-		} else if (low != IWL_RATE_INVALID) {
-			IWL_DEBUG_RATE(mvm,
-				       "Remain in current rate\n");
-			action = RS_ACTION_STAY;
-		}
+			       "Decrease rate because of low SR\n");
+		return RS_ACTION_DOWNSCALE;
 	}
 
-	/* Both adjacent throughputs are measured, but neither one has better
-	 * throughput; we're using the best rate, don't change it!
-	 */
-	else if ((low_tpt != IWL_INVALID_VALUE) &&
-		 (high_tpt != IWL_INVALID_VALUE) &&
-		 (low_tpt < current_tpt) &&
-		 (high_tpt < current_tpt)) {
+	if ((low_tpt == IWL_INVALID_VALUE) &&
+	    (high_tpt == IWL_INVALID_VALUE) &&
+	    (high != IWL_RATE_INVALID)) {
 		IWL_DEBUG_RATE(mvm,
-			       "Both high and low are worse. "
-			       "Maintain rate\n");
-		action = RS_ACTION_STAY;
+			       "No data about high/low rates. Increase rate\n");
+		return RS_ACTION_UPSCALE;
 	}
 
-	/* At least one adjacent rate's throughput is measured,
-	 * and may have better performance.
-	 */
-	else {
-		/* Higher adjacent rate's throughput is measured */
-		if (high_tpt != IWL_INVALID_VALUE) {
-			/* Higher rate has better throughput */
-			if (high_tpt > current_tpt &&
-			    sr >= IWL_RATE_INCREASE_TH) {
-				IWL_DEBUG_RATE(mvm,
-					       "Higher rate is better and good "
-					       "SR. Increate rate\n");
-				action = RS_ACTION_UPSCALE;
-			} else {
-				IWL_DEBUG_RATE(mvm,
-					       "Higher rate isn't better OR "
-					       "no good SR. Maintain rate\n");
-				action = RS_ACTION_STAY;
-			}
+	if ((high_tpt == IWL_INVALID_VALUE) &&
+	    (high != IWL_RATE_INVALID) &&
+	    (low_tpt != IWL_INVALID_VALUE) &&
+	    (low_tpt < current_tpt)) {
+		IWL_DEBUG_RATE(mvm,
+			       "No data about high rate and low rate is worse. Increase rate\n");
+		return RS_ACTION_UPSCALE;
+	}
 
-		/* Lower adjacent rate's throughput is measured */
-		} else if (low_tpt != IWL_INVALID_VALUE) {
-			/* Lower rate has better throughput */
-			if (low_tpt > current_tpt) {
-				IWL_DEBUG_RATE(mvm,
-					       "Lower rate is better. "
-					       "Decrease rate\n");
-				action = RS_ACTION_DOWNSCALE;
-			} else if (sr >= IWL_RATE_INCREASE_TH) {
-				IWL_DEBUG_RATE(mvm,
-					       "Lower rate isn't better and "
-					       "good SR. Increase rate\n");
-				action = RS_ACTION_UPSCALE;
-			}
-		}
+	if ((high_tpt != IWL_INVALID_VALUE) &&
+	    (high_tpt > current_tpt)) {
+		IWL_DEBUG_RATE(mvm,
+			       "Higher rate is better. Increate rate\n");
+		return RS_ACTION_UPSCALE;
 	}
 
-	/* Sanity check; asked for decrease, but success rate or throughput
-	 * has been good at old rate.  Don't change it.
-	 */
-	if ((action == RS_ACTION_DOWNSCALE) && (low != IWL_RATE_INVALID) &&
-	    ((sr > IWL_RATE_HIGH_TH) ||
-	     (current_tpt > (100 * tbl->expected_tpt[low])))) {
+	if ((low_tpt != IWL_INVALID_VALUE) &&
+	    (high_tpt != IWL_INVALID_VALUE) &&
+	    (low_tpt < current_tpt) &&
+	    (high_tpt < current_tpt)) {
+		IWL_DEBUG_RATE(mvm,
+			       "Both high and low are worse. Maintain rate\n");
+		return RS_ACTION_STAY;
+	}
+
+	if ((low_tpt != IWL_INVALID_VALUE) &&
+	    (low_tpt > current_tpt)) {
+		IWL_DEBUG_RATE(mvm,
+			       "Lower rate is better\n");
+		action = RS_ACTION_DOWNSCALE;
+		goto out;
+	}
+
+	if ((low_tpt == IWL_INVALID_VALUE) &&
+	    (low != IWL_RATE_INVALID)) {
 		IWL_DEBUG_RATE(mvm,
-			       "Sanity check failed. Maintain rate\n");
-		action = RS_ACTION_STAY;
+			       "No data about lower rate\n");
+		action = RS_ACTION_DOWNSCALE;
+		goto out;
+	}
+
+	IWL_DEBUG_RATE(mvm, "Maintain rate\n");
+
+out:
+	if ((action == RS_ACTION_DOWNSCALE) && (low != IWL_RATE_INVALID)) {
+		if (sr >= RS_SR_NO_DECREASE) {
+			IWL_DEBUG_RATE(mvm,
+				       "SR is above NO DECREASE. Avoid downscale\n");
+			action = RS_ACTION_STAY;
+		} else if (current_tpt > (100 * tbl->expected_tpt[low])) {
+			IWL_DEBUG_RATE(mvm,
+				       "Current TPT is higher than max expected in low rate. Avoid downscale\n");
+			action = RS_ACTION_STAY;
+		} else {
+			IWL_DEBUG_RATE(mvm, "Decrease rate\n");
+		}
 	}
 
 	return action;
@@ -1792,6 +1837,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm,
 			       "Aggregation changed: prev %d current %d. Update expected TPT table\n",
 			       prev_agg, lq_sta->is_agg);
 		rs_set_expected_tpt_table(lq_sta, tbl);
+		rs_rate_scale_clear_tbl_windows(mvm, tbl);
 	}
 
 	/* current tx rate */
@@ -2021,7 +2067,7 @@ lq_update:
 		if (lq_sta->search_better_tbl) {
 			/* Access the "search" table, clear its history. */
 			tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
-			rs_rate_scale_clear_tbl_windows(tbl);
+			rs_rate_scale_clear_tbl_windows(mvm, tbl);
 
 			/* Use new "search" start rate */
 			index = tbl->rate.index;
@@ -2042,8 +2088,18 @@ lq_update:
 		 * stay with best antenna legacy modulation for a while
 		 * before next round of mode comparisons. */
 		tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
-		if (is_legacy(&tbl1->rate) && !sta->ht_cap.ht_supported) {
+		if (is_legacy(&tbl1->rate)) {
 			IWL_DEBUG_RATE(mvm, "LQ: STAY in legacy table\n");
+
+			if (tid != IWL_MAX_TID_COUNT) {
+				tid_data = &sta_priv->tid_data[tid];
+				if (tid_data->state != IWL_AGG_OFF) {
+					IWL_DEBUG_RATE(mvm,
+						       "Stop aggregation on tid %d\n",
+						       tid);
+					ieee80211_stop_tx_ba_session(sta, tid);
+				}
+			}
 			rs_set_stay_in_table(mvm, 1, lq_sta);
 		} else {
 		/* If we're in an HT mode, and all 3 mode switch actions
@@ -2342,9 +2398,10 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 	lq_sta->lq.sta_id = sta_priv->sta_id;
 
 	for (j = 0; j < LQ_SIZE; j++)
-		rs_rate_scale_clear_tbl_windows(&lq_sta->lq_info[j]);
+		rs_rate_scale_clear_tbl_windows(mvm, &lq_sta->lq_info[j]);
 
 	lq_sta->flush_timer = 0;
+	lq_sta->last_tx = jiffies;
 
 	IWL_DEBUG_RATE(mvm,
 		       "LQ: *** rate scale station global init for station %d ***\n",
@@ -2388,11 +2445,22 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 		lq_sta->is_vht = true;
 	}
 
-	IWL_DEBUG_RATE(mvm,
-		       "SISO-RATE=%X MIMO2-RATE=%X VHT=%d\n",
+	lq_sta->max_legacy_rate_idx = find_last_bit(&lq_sta->active_legacy_rate,
+						    BITS_PER_LONG);
+	lq_sta->max_siso_rate_idx = find_last_bit(&lq_sta->active_siso_rate,
+						  BITS_PER_LONG);
+	lq_sta->max_mimo2_rate_idx = find_last_bit(&lq_sta->active_mimo2_rate,
+						   BITS_PER_LONG);
+
+	IWL_DEBUG_RATE(mvm, "RATE MASK: LEGACY=%lX SISO=%lX MIMO2=%lX VHT=%d\n",
+		       lq_sta->active_legacy_rate,
 		       lq_sta->active_siso_rate,
 		       lq_sta->active_mimo2_rate,
 		       lq_sta->is_vht);
+	IWL_DEBUG_RATE(mvm, "MAX RATE: LEGACY=%d SISO=%d MIMO2=%d\n",
+		       lq_sta->max_legacy_rate_idx,
+		       lq_sta->max_siso_rate_idx,
+		       lq_sta->max_mimo2_rate_idx);
 
 	/* These values will be overridden later */
 	lq_sta->lq.single_stream_ant_msk =
@@ -2547,6 +2615,7 @@ static void rs_build_rates_table(struct iwl_mvm *mvm,
 	if (is_siso(&rate)) {
 		num_rates = RS_SECONDARY_SISO_NUM_RATES;
 		num_retries = RS_SECONDARY_SISO_RETRIES;
+		lq_cmd->mimo_delim = index;
 	} else if (is_legacy(&rate)) {
 		num_rates = RS_SECONDARY_LEGACY_NUM_RATES;
 		num_retries = RS_LEGACY_RETRIES_PER_RATE;
@@ -2749,7 +2818,7 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
 		return -ENOMEM;
 
 	desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
-	desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
+	desc += sprintf(buff+desc, "failed=%d success=%d rate=0%lX\n",
 			lq_sta->total_failed, lq_sta->total_success,
 			lq_sta->active_legacy_rate);
 	desc += sprintf(buff+desc, "fixed rate 0x%X\n",
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index 3332b396011e..0acfac96a56c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -156,6 +156,7 @@ enum {
 #define IWL_RATE_HIGH_TH		10880	/*  85% */
 #define IWL_RATE_INCREASE_TH		6400	/*  50% */
 #define RS_SR_FORCE_DECREASE		1920	/*  15% */
+#define RS_SR_NO_DECREASE		10880	/*  85% */
 
 #define LINK_QUAL_AGG_TIME_LIMIT_DEF	(4000) /* 4 milliseconds */
 #define LINK_QUAL_AGG_TIME_LIMIT_MAX	(8000)
@@ -310,13 +311,20 @@ struct iwl_lq_sta {
 	u32 visited_columns;    /* Bitmask marking which Tx columns were
 				 * explored during a search cycle
 				 */
+	u64 last_tx;
 	bool is_vht;
 	enum ieee80211_band band;
 
 	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
-	u16 active_legacy_rate;
-	u16 active_siso_rate;
-	u16 active_mimo2_rate;
+	unsigned long active_legacy_rate;
+	unsigned long active_siso_rate;
+	unsigned long active_mimo2_rate;
+
+	/* Highest rate per Tx mode */
+	u8 max_legacy_rate_idx;
+	u8 max_siso_rate_idx;
+	u8 max_mimo2_rate_idx;
+
 	s8 max_rate_idx;     /* Max rate set by user */
 	u8 missed_rate_counter;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/sf.c b/drivers/net/wireless/iwlwifi/mvm/sf.c
index 8401627c0030..88809b2d1654 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sf.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sf.c
@@ -274,7 +274,8 @@ int iwl_mvm_sf_update(struct iwl_mvm *mvm, struct ieee80211_vif *changed_vif,
 				return -EINVAL;
 			if (changed_vif->type != NL80211_IFTYPE_STATION) {
 				new_state = SF_UNINIT;
-			} else if (changed_vif->bss_conf.assoc) {
+			} else if (changed_vif->bss_conf.assoc &&
+				   changed_vif->bss_conf.dtim_period) {
 				mvmvif = iwl_mvm_vif_from_mac80211(changed_vif);
 				sta_id = mvmvif->ap_sta_id;
 				new_state = SF_FULL_ON;
diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c
index edb015c99049..3d1d57f9f5bc 100644
--- a/drivers/net/wireless/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/iwlwifi/pcie/drv.c
@@ -373,12 +373,14 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2n_cfg)},
 	{IWL_PCI_DEVICE(0x095B, 0x5200, iwl7265_2n_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x5002, iwl7265_n_cfg)},
+	{IWL_PCI_DEVICE(0x095A, 0x5102, iwl7265_n_cfg)},
 	{IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
+	{IWL_PCI_DEVICE(0x095A, 0x9200, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x095A, 0x9410, iwl7265_2ac_cfg)},
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 77db0886c6e2..9c771b3e9918 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -292,6 +292,12 @@ process_start:
 			while ((skb = skb_dequeue(&adapter->usb_rx_data_q)))
 				mwifiex_handle_rx_packet(adapter, skb);
 
+		/* Check for event */
+		if (adapter->event_received) {
+			adapter->event_received = false;
+			mwifiex_process_event(adapter);
+		}
+
 		/* Check for Cmd Resp */
 		if (adapter->cmd_resp_received) {
 			adapter->cmd_resp_received = false;
@@ -304,12 +310,6 @@ process_start:
 			}
 		}
 
-		/* Check for event */
-		if (adapter->event_received) {
-			adapter->event_received = false;
-			mwifiex_process_event(adapter);
-		}
-
 		/* Check if we need to confirm Sleep Request
 		   received previously */
 		if (adapter->ps_state == PS_STATE_PRE_SLEEP) {
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 894270611f2c..536c14aa71f3 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -60,9 +60,10 @@ int mwifiex_wait_queue_complete(struct mwifiex_adapter *adapter,
 	int status;
 
 	/* Wait for completion */
-	status = wait_event_interruptible(adapter->cmd_wait_q.wait,
-					  *(cmd_queued->condition));
-	if (status) {
+	status = wait_event_interruptible_timeout(adapter->cmd_wait_q.wait,
+						  *(cmd_queued->condition),
+						  (12 * HZ));
+	if (status <= 0) {
 		dev_err(adapter->dev, "cmd_wait_q terminated: %d\n", status);
 		mwifiex_cancel_all_pending_cmd(adapter);
 		return status;
diff --git a/drivers/net/wireless/rsi/rsi_91x_core.c b/drivers/net/wireless/rsi/rsi_91x_core.c
index 1a8d32138593..cf61d6e3eaa7 100644
--- a/drivers/net/wireless/rsi/rsi_91x_core.c
+++ b/drivers/net/wireless/rsi/rsi_91x_core.c
@@ -88,7 +88,7 @@ static u8 rsi_core_determine_hal_queue(struct rsi_common *common)
 	bool recontend_queue = false;
 	u32 q_len = 0;
 	u8 q_num = INVALID_QUEUE;
-	u8 ii, min = 0;
+	u8 ii = 0, min = 0;
 
 	if (skb_queue_len(&common->tx_queue[MGMT_SOFT_Q])) {
 		if (!common->mgmt_q_block)
diff --git a/drivers/net/wireless/rsi/rsi_91x_mgmt.c b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
index 73694295648f..1b28cda6ca88 100644
--- a/drivers/net/wireless/rsi/rsi_91x_mgmt.c
+++ b/drivers/net/wireless/rsi/rsi_91x_mgmt.c
@@ -841,16 +841,6 @@ int rsi_set_channel(struct rsi_common *common, u16 channel)
 	rsi_dbg(MGMT_TX_ZONE,
 		"%s: Sending scan req frame\n", __func__);
 
-	skb = dev_alloc_skb(FRAME_DESC_SZ);
-	if (!skb) {
-		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	memset(skb->data, 0, FRAME_DESC_SZ);
-	mgmt_frame = (struct rsi_mac_frame *)skb->data;
-
 	if (common->band == IEEE80211_BAND_5GHZ) {
 		if ((channel >= 36) && (channel <= 64))
 			channel = ((channel - 32) / 4);
@@ -868,6 +858,16 @@ int rsi_set_channel(struct rsi_common *common, u16 channel)
 		}
 	}
 
+	skb = dev_alloc_skb(FRAME_DESC_SZ);
+	if (!skb) {
+		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of skb\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	memset(skb->data, 0, FRAME_DESC_SZ);
+	mgmt_frame = (struct rsi_mac_frame *)skb->data;
+
 	mgmt_frame->desc_word[0] = cpu_to_le16(RSI_WIFI_MGMT_Q << 12);
 	mgmt_frame->desc_word[1] = cpu_to_le16(SCAN_REQUEST);
 	mgmt_frame->desc_word[4] = cpu_to_le16(channel);
@@ -966,6 +966,7 @@ static int rsi_send_auto_rate_request(struct rsi_common *common)
 	if (!selected_rates) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of mem\n",
 			__func__);
+		dev_kfree_skb(skb);
 		return -ENOMEM;
 	}
 
diff --git a/drivers/net/wireless/ti/wl18xx/event.h b/drivers/net/wireless/ti/wl18xx/event.h
index 398f3d2c0a6c..a76e98eb8372 100644
--- a/drivers/net/wireless/ti/wl18xx/event.h
+++ b/drivers/net/wireless/ti/wl18xx/event.h
@@ -68,6 +68,26 @@ struct wl18xx_event_mailbox {
 
 	/* bitmap of inactive stations (by HLID) */
 	__le32 inactive_sta_bitmap;
+
+	/* rx BA win size indicated by RX_BA_WIN_SIZE_CHANGE_EVENT_ID */
+	u8 rx_ba_role_id;
+	u8 rx_ba_link_id;
+	u8 rx_ba_win_size;
+	u8 padding;
+
+	/* smart config */
+	u8 sc_ssid_len;
+	u8 sc_pwd_len;
+	u8 sc_token_len;
+	u8 padding1;
+	u8 sc_ssid[32];
+	u8 sc_pwd[32];
+	u8 sc_token[32];
+
+	/* smart config sync channel */
+	u8 sc_sync_channel;
+	u8 sc_sync_band;
+	u8 padding2[2];
 } __packed;
 
 int wl18xx_wait_for_event(struct wl1271 *wl, enum wlcore_wait_event event,
diff --git a/drivers/net/wireless/ti/wlcore/event.c b/drivers/net/wireless/ti/wlcore/event.c
index 1f9a36031b06..16d10281798d 100644
--- a/drivers/net/wireless/ti/wlcore/event.c
+++ b/drivers/net/wireless/ti/wlcore/event.c
@@ -158,6 +158,11 @@ EXPORT_SYMBOL_GPL(wlcore_event_channel_switch);
 
 void wlcore_event_dummy_packet(struct wl1271 *wl)
 {
+	if (wl->plt) {
+		wl1271_info("Got DUMMY_PACKET event in PLT mode.  FW bug, ignoring.");
+		return;
+	}
+
 	wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID");
 	wl1271_tx_dummy_packet(wl);
 }
diff --git a/drivers/of/base.c b/drivers/of/base.c
index f72d19b7e5d2..6d4ee22708c9 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1828,17 +1828,13 @@ int of_update_property(struct device_node *np, struct property *newprop)
 		next = &(*next)->next;
 	}
 	raw_spin_unlock_irqrestore(&devtree_lock, flags);
-	if (rc)
-		return rc;
+	if (!found)
+		return -ENODEV;
 
 	/* Update the sysfs attribute */
-	if (oldprop)
-		sysfs_remove_bin_file(&np->kobj, &oldprop->attr);
+	sysfs_remove_bin_file(&np->kobj, &oldprop->attr);
 	__of_add_property_sysfs(np, newprop);
 
-	if (!found)
-		return -ENODEV;
-
 	return 0;
 }
 
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index fa16a912a927..7a2ef7bb8022 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -491,7 +491,7 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
  * in /reserved-memory matches the values supported by the current implementation,
  * also check if ranges property has been provided
  */
-static int __reserved_mem_check_root(unsigned long node)
+static int __init __reserved_mem_check_root(unsigned long node)
 {
 	__be32 *prop;
 
diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c
index fd3e3ab56509..4fe349dcaf59 100644
--- a/drivers/pci/host/pci-rcar-gen2.c
+++ b/drivers/pci/host/pci-rcar-gen2.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_pci.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -180,8 +181,13 @@ static int rcar_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pci_sys_data *sys = dev->bus->sysdata;
 	struct rcar_pci_priv *priv = sys->private_data;
+	int irq;
+
+	irq = of_irq_parse_and_map_pci(dev, slot, pin);
+	if (!irq)
+		irq = priv->irq;
 
-	return priv->irq;
+	return irq;
 }
 
 #ifdef CONFIG_PCI_DEBUG
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 330f7e3a32dd..083cf37ca047 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -639,10 +639,15 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 {
 	struct tegra_pcie *pcie = sys_to_pcie(pdev->bus->sysdata);
+	int irq;
 
 	tegra_cpuidle_pcie_irqs_in_use();
 
-	return pcie->irq;
+	irq = of_irq_parse_and_map_pci(pdev, slot, pin);
+	if (!irq)
+		irq = pcie->irq;
+
+	return irq;
 }
 
 static void tegra_pcie_add_bus(struct pci_bus *bus)
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 509a29d84509..c4e373294476 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/msi.h>
 #include <linux/of_address.h>
+#include <linux/of_pci.h>
 #include <linux/pci.h>
 #include <linux/pci_regs.h>
 #include <linux/types.h>
@@ -490,7 +491,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
 	dw_pci.nr_controllers = 1;
 	dw_pci.private_data = (void **)&pp;
 
-	pci_common_init(&dw_pci);
+	pci_common_init_dev(pp->dev, &dw_pci);
 	pci_assign_unassigned_resources();
 #ifdef CONFIG_PCI_DOMAINS
 	dw_pci.domain++;
@@ -520,13 +521,13 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
 	dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
 			  PCIE_ATU_VIEWPORT);
 	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
-	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 	dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE);
 	dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE);
 	dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
 			  PCIE_ATU_LIMIT);
 	dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
 	dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
+	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 }
 
 static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
@@ -535,7 +536,6 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
 	dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
 			  PCIE_ATU_VIEWPORT);
 	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
-	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 	dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
 	dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
 	dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
@@ -543,6 +543,7 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
 	dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
 	dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
 			  PCIE_ATU_UPPER_TARGET);
+	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 }
 
 static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
@@ -551,7 +552,6 @@ static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
 	dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
 			  PCIE_ATU_VIEWPORT);
 	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
-	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 	dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
 	dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
 	dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
@@ -559,6 +559,7 @@ static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
 	dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
 	dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
 			  PCIE_ATU_UPPER_TARGET);
+	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 }
 
 static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
@@ -723,7 +724,7 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 
 	if (pp) {
 		pp->root_bus_nr = sys->busnr;
-		bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
+		bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops,
 					sys, &sys->resources);
 	} else {
 		bus = NULL;
@@ -736,8 +737,13 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
+	int irq;
+
+	irq = of_irq_parse_and_map_pci(dev, slot, pin);
+	if (!irq)
+		irq = pp->irq;
 
-	return pp->irq;
+	return irq;
 }
 
 static void dw_pcie_add_bus(struct pci_bus *bus)
@@ -764,7 +770,7 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	u32 membase;
 	u32 memlimit;
 
-	/* set the number of lines as 4 */
+	/* set the number of lanes */
 	dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
 	val &= ~PORT_LINK_MODE_MASK;
 	switch (pp->lanes) {
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e49324032611..e00c02d0a094 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -104,16 +104,16 @@ config PINCTRL_BCM2835
 	select PINMUX
 	select PINCONF
 
-config PINCTRL_CAPRI
-	bool "Broadcom Capri pinctrl driver"
+config PINCTRL_BCM281XX
+	bool "Broadcom BCM281xx pinctrl driver"
 	depends on OF
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
 	select REGMAP_MMIO
 	help
-	  Say Y here to support Broadcom Capri pinctrl driver, which is used for
-	  the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
 	  BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
 	  framework.  GPIO is provided by a separate GPIO driver.
 
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 4b835880cf80..6d3fd62b9ae8 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_PINCTRL_BF60x)	+= pinctrl-adi2-bf60x.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_BAYTRAIL)	+= pinctrl-baytrail.o
-obj-$(CONFIG_PINCTRL_CAPRI)	+= pinctrl-capri.o
+obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctrl-bcm281xx.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
 obj-$(CONFIG_PINCTRL_IMX1_CORE)	+= pinctrl-imx1-core.o
 obj-$(CONFIG_PINCTRL_IMX27)	+= pinctrl-imx27.o
diff --git a/drivers/pinctrl/pinctrl-bcm281xx.c b/drivers/pinctrl/pinctrl-bcm281xx.c
new file mode 100644
index 000000000000..3bed792b2c03
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-bcm281xx.c
@@ -0,0 +1,1461 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "pinctrl-utils.h"
+
+/* BCM281XX Pin Control Registers Definitions */
+
+/* Function Select bits are the same for all pin control registers */
+#define BCM281XX_PIN_REG_F_SEL_MASK		0x0700
+#define BCM281XX_PIN_REG_F_SEL_SHIFT		8
+
+/* Standard pin register */
+#define BCM281XX_STD_PIN_REG_DRV_STR_MASK	0x0007
+#define BCM281XX_STD_PIN_REG_DRV_STR_SHIFT	0
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_MASK	0x0008
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_SHIFT	3
+#define BCM281XX_STD_PIN_REG_SLEW_MASK		0x0010
+#define BCM281XX_STD_PIN_REG_SLEW_SHIFT		4
+#define BCM281XX_STD_PIN_REG_PULL_UP_MASK	0x0020
+#define BCM281XX_STD_PIN_REG_PULL_UP_SHIFT	5
+#define BCM281XX_STD_PIN_REG_PULL_DN_MASK	0x0040
+#define BCM281XX_STD_PIN_REG_PULL_DN_SHIFT	6
+#define BCM281XX_STD_PIN_REG_HYST_MASK		0x0080
+#define BCM281XX_STD_PIN_REG_HYST_SHIFT		7
+
+/* I2C pin register */
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_MASK	0x0004
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_SHIFT	2
+#define BCM281XX_I2C_PIN_REG_SLEW_MASK		0x0008
+#define BCM281XX_I2C_PIN_REG_SLEW_SHIFT		3
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_MASK	0x0070
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_SHIFT	4
+
+/* HDMI pin register */
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_MASK	0x0008
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_SHIFT	3
+#define BCM281XX_HDMI_PIN_REG_MODE_MASK		0x0010
+#define BCM281XX_HDMI_PIN_REG_MODE_SHIFT	4
+
+/**
+ * bcm281xx_pin_type - types of pin register
+ */
+enum bcm281xx_pin_type {
+	BCM281XX_PIN_TYPE_UNKNOWN = 0,
+	BCM281XX_PIN_TYPE_STD,
+	BCM281XX_PIN_TYPE_I2C,
+	BCM281XX_PIN_TYPE_HDMI,
+};
+
+static enum bcm281xx_pin_type std_pin = BCM281XX_PIN_TYPE_STD;
+static enum bcm281xx_pin_type i2c_pin = BCM281XX_PIN_TYPE_I2C;
+static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI;
+
+/**
+ * bcm281xx_pin_function- define pin function
+ */
+struct bcm281xx_pin_function {
+	const char *name;
+	const char * const *groups;
+	const unsigned ngroups;
+};
+
+/**
+ * bcm281xx_pinctrl_data - Broadcom-specific pinctrl data
+ * @reg_base - base of pinctrl registers
+ */
+struct bcm281xx_pinctrl_data {
+	void __iomem *reg_base;
+
+	/* List of all pins */
+	const struct pinctrl_pin_desc *pins;
+	const unsigned npins;
+
+	const struct bcm281xx_pin_function *functions;
+	const unsigned nfunctions;
+
+	struct regmap *regmap;
+};
+
+/*
+ * Pin number definition.  The order here must be the same as defined in the
+ * PADCTRLREG block in the RDB.
+ */
+#define BCM281XX_PIN_ADCSYNC		0
+#define BCM281XX_PIN_BAT_RM		1
+#define BCM281XX_PIN_BSC1_SCL		2
+#define BCM281XX_PIN_BSC1_SDA		3
+#define BCM281XX_PIN_BSC2_SCL		4
+#define BCM281XX_PIN_BSC2_SDA		5
+#define BCM281XX_PIN_CLASSGPWR		6
+#define BCM281XX_PIN_CLK_CX8		7
+#define BCM281XX_PIN_CLKOUT_0		8
+#define BCM281XX_PIN_CLKOUT_1		9
+#define BCM281XX_PIN_CLKOUT_2		10
+#define BCM281XX_PIN_CLKOUT_3		11
+#define BCM281XX_PIN_CLKREQ_IN_0	12
+#define BCM281XX_PIN_CLKREQ_IN_1	13
+#define BCM281XX_PIN_CWS_SYS_REQ1	14
+#define BCM281XX_PIN_CWS_SYS_REQ2	15
+#define BCM281XX_PIN_CWS_SYS_REQ3	16
+#define BCM281XX_PIN_DIGMIC1_CLK	17
+#define BCM281XX_PIN_DIGMIC1_DQ		18
+#define BCM281XX_PIN_DIGMIC2_CLK	19
+#define BCM281XX_PIN_DIGMIC2_DQ		20
+#define BCM281XX_PIN_GPEN13		21
+#define BCM281XX_PIN_GPEN14		22
+#define BCM281XX_PIN_GPEN15		23
+#define BCM281XX_PIN_GPIO00		24
+#define BCM281XX_PIN_GPIO01		25
+#define BCM281XX_PIN_GPIO02		26
+#define BCM281XX_PIN_GPIO03		27
+#define BCM281XX_PIN_GPIO04		28
+#define BCM281XX_PIN_GPIO05		29
+#define BCM281XX_PIN_GPIO06		30
+#define BCM281XX_PIN_GPIO07		31
+#define BCM281XX_PIN_GPIO08		32
+#define BCM281XX_PIN_GPIO09		33
+#define BCM281XX_PIN_GPIO10		34
+#define BCM281XX_PIN_GPIO11		35
+#define BCM281XX_PIN_GPIO12		36
+#define BCM281XX_PIN_GPIO13		37
+#define BCM281XX_PIN_GPIO14		38
+#define BCM281XX_PIN_GPS_PABLANK	39
+#define BCM281XX_PIN_GPS_TMARK		40
+#define BCM281XX_PIN_HDMI_SCL		41
+#define BCM281XX_PIN_HDMI_SDA		42
+#define BCM281XX_PIN_IC_DM		43
+#define BCM281XX_PIN_IC_DP		44
+#define BCM281XX_PIN_KP_COL_IP_0	45
+#define BCM281XX_PIN_KP_COL_IP_1	46
+#define BCM281XX_PIN_KP_COL_IP_2	47
+#define BCM281XX_PIN_KP_COL_IP_3	48
+#define BCM281XX_PIN_KP_ROW_OP_0	49
+#define BCM281XX_PIN_KP_ROW_OP_1	50
+#define BCM281XX_PIN_KP_ROW_OP_2	51
+#define BCM281XX_PIN_KP_ROW_OP_3	52
+#define BCM281XX_PIN_LCD_B_0		53
+#define BCM281XX_PIN_LCD_B_1		54
+#define BCM281XX_PIN_LCD_B_2		55
+#define BCM281XX_PIN_LCD_B_3		56
+#define BCM281XX_PIN_LCD_B_4		57
+#define BCM281XX_PIN_LCD_B_5		58
+#define BCM281XX_PIN_LCD_B_6		59
+#define BCM281XX_PIN_LCD_B_7		60
+#define BCM281XX_PIN_LCD_G_0		61
+#define BCM281XX_PIN_LCD_G_1		62
+#define BCM281XX_PIN_LCD_G_2		63
+#define BCM281XX_PIN_LCD_G_3		64
+#define BCM281XX_PIN_LCD_G_4		65
+#define BCM281XX_PIN_LCD_G_5		66
+#define BCM281XX_PIN_LCD_G_6		67
+#define BCM281XX_PIN_LCD_G_7		68
+#define BCM281XX_PIN_LCD_HSYNC		69
+#define BCM281XX_PIN_LCD_OE		70
+#define BCM281XX_PIN_LCD_PCLK		71
+#define BCM281XX_PIN_LCD_R_0		72
+#define BCM281XX_PIN_LCD_R_1		73
+#define BCM281XX_PIN_LCD_R_2		74
+#define BCM281XX_PIN_LCD_R_3		75
+#define BCM281XX_PIN_LCD_R_4		76
+#define BCM281XX_PIN_LCD_R_5		77
+#define BCM281XX_PIN_LCD_R_6		78
+#define BCM281XX_PIN_LCD_R_7		79
+#define BCM281XX_PIN_LCD_VSYNC		80
+#define BCM281XX_PIN_MDMGPIO0		81
+#define BCM281XX_PIN_MDMGPIO1		82
+#define BCM281XX_PIN_MDMGPIO2		83
+#define BCM281XX_PIN_MDMGPIO3		84
+#define BCM281XX_PIN_MDMGPIO4		85
+#define BCM281XX_PIN_MDMGPIO5		86
+#define BCM281XX_PIN_MDMGPIO6		87
+#define BCM281XX_PIN_MDMGPIO7		88
+#define BCM281XX_PIN_MDMGPIO8		89
+#define BCM281XX_PIN_MPHI_DATA_0	90
+#define BCM281XX_PIN_MPHI_DATA_1	91
+#define BCM281XX_PIN_MPHI_DATA_2	92
+#define BCM281XX_PIN_MPHI_DATA_3	93
+#define BCM281XX_PIN_MPHI_DATA_4	94
+#define BCM281XX_PIN_MPHI_DATA_5	95
+#define BCM281XX_PIN_MPHI_DATA_6	96
+#define BCM281XX_PIN_MPHI_DATA_7	97
+#define BCM281XX_PIN_MPHI_DATA_8	98
+#define BCM281XX_PIN_MPHI_DATA_9	99
+#define BCM281XX_PIN_MPHI_DATA_10	100
+#define BCM281XX_PIN_MPHI_DATA_11	101
+#define BCM281XX_PIN_MPHI_DATA_12	102
+#define BCM281XX_PIN_MPHI_DATA_13	103
+#define BCM281XX_PIN_MPHI_DATA_14	104
+#define BCM281XX_PIN_MPHI_DATA_15	105
+#define BCM281XX_PIN_MPHI_HA0		106
+#define BCM281XX_PIN_MPHI_HAT0		107
+#define BCM281XX_PIN_MPHI_HAT1		108
+#define BCM281XX_PIN_MPHI_HCE0_N	109
+#define BCM281XX_PIN_MPHI_HCE1_N	110
+#define BCM281XX_PIN_MPHI_HRD_N		111
+#define BCM281XX_PIN_MPHI_HWR_N		112
+#define BCM281XX_PIN_MPHI_RUN0		113
+#define BCM281XX_PIN_MPHI_RUN1		114
+#define BCM281XX_PIN_MTX_SCAN_CLK	115
+#define BCM281XX_PIN_MTX_SCAN_DATA	116
+#define BCM281XX_PIN_NAND_AD_0		117
+#define BCM281XX_PIN_NAND_AD_1		118
+#define BCM281XX_PIN_NAND_AD_2		119
+#define BCM281XX_PIN_NAND_AD_3		120
+#define BCM281XX_PIN_NAND_AD_4		121
+#define BCM281XX_PIN_NAND_AD_5		122
+#define BCM281XX_PIN_NAND_AD_6		123
+#define BCM281XX_PIN_NAND_AD_7		124
+#define BCM281XX_PIN_NAND_ALE		125
+#define BCM281XX_PIN_NAND_CEN_0		126
+#define BCM281XX_PIN_NAND_CEN_1		127
+#define BCM281XX_PIN_NAND_CLE		128
+#define BCM281XX_PIN_NAND_OEN		129
+#define BCM281XX_PIN_NAND_RDY_0		130
+#define BCM281XX_PIN_NAND_RDY_1		131
+#define BCM281XX_PIN_NAND_WEN		132
+#define BCM281XX_PIN_NAND_WP		133
+#define BCM281XX_PIN_PC1		134
+#define BCM281XX_PIN_PC2		135
+#define BCM281XX_PIN_PMU_INT		136
+#define BCM281XX_PIN_PMU_SCL		137
+#define BCM281XX_PIN_PMU_SDA		138
+#define BCM281XX_PIN_RFST2G_MTSLOTEN3G	139
+#define BCM281XX_PIN_RGMII_0_RX_CTL	140
+#define BCM281XX_PIN_RGMII_0_RXC	141
+#define BCM281XX_PIN_RGMII_0_RXD_0	142
+#define BCM281XX_PIN_RGMII_0_RXD_1	143
+#define BCM281XX_PIN_RGMII_0_RXD_2	144
+#define BCM281XX_PIN_RGMII_0_RXD_3	145
+#define BCM281XX_PIN_RGMII_0_TX_CTL	146
+#define BCM281XX_PIN_RGMII_0_TXC	147
+#define BCM281XX_PIN_RGMII_0_TXD_0	148
+#define BCM281XX_PIN_RGMII_0_TXD_1	149
+#define BCM281XX_PIN_RGMII_0_TXD_2	150
+#define BCM281XX_PIN_RGMII_0_TXD_3	151
+#define BCM281XX_PIN_RGMII_1_RX_CTL	152
+#define BCM281XX_PIN_RGMII_1_RXC	153
+#define BCM281XX_PIN_RGMII_1_RXD_0	154
+#define BCM281XX_PIN_RGMII_1_RXD_1	155
+#define BCM281XX_PIN_RGMII_1_RXD_2	156
+#define BCM281XX_PIN_RGMII_1_RXD_3	157
+#define BCM281XX_PIN_RGMII_1_TX_CTL	158
+#define BCM281XX_PIN_RGMII_1_TXC	159
+#define BCM281XX_PIN_RGMII_1_TXD_0	160
+#define BCM281XX_PIN_RGMII_1_TXD_1	161
+#define BCM281XX_PIN_RGMII_1_TXD_2	162
+#define BCM281XX_PIN_RGMII_1_TXD_3	163
+#define BCM281XX_PIN_RGMII_GPIO_0	164
+#define BCM281XX_PIN_RGMII_GPIO_1	165
+#define BCM281XX_PIN_RGMII_GPIO_2	166
+#define BCM281XX_PIN_RGMII_GPIO_3	167
+#define BCM281XX_PIN_RTXDATA2G_TXDATA3G1	168
+#define BCM281XX_PIN_RTXEN2G_TXDATA3G2	169
+#define BCM281XX_PIN_RXDATA3G0		170
+#define BCM281XX_PIN_RXDATA3G1		171
+#define BCM281XX_PIN_RXDATA3G2		172
+#define BCM281XX_PIN_SDIO1_CLK		173
+#define BCM281XX_PIN_SDIO1_CMD		174
+#define BCM281XX_PIN_SDIO1_DATA_0	175
+#define BCM281XX_PIN_SDIO1_DATA_1	176
+#define BCM281XX_PIN_SDIO1_DATA_2	177
+#define BCM281XX_PIN_SDIO1_DATA_3	178
+#define BCM281XX_PIN_SDIO4_CLK		179
+#define BCM281XX_PIN_SDIO4_CMD		180
+#define BCM281XX_PIN_SDIO4_DATA_0	181
+#define BCM281XX_PIN_SDIO4_DATA_1	182
+#define BCM281XX_PIN_SDIO4_DATA_2	183
+#define BCM281XX_PIN_SDIO4_DATA_3	184
+#define BCM281XX_PIN_SIM_CLK		185
+#define BCM281XX_PIN_SIM_DATA		186
+#define BCM281XX_PIN_SIM_DET		187
+#define BCM281XX_PIN_SIM_RESETN		188
+#define BCM281XX_PIN_SIM2_CLK		189
+#define BCM281XX_PIN_SIM2_DATA		190
+#define BCM281XX_PIN_SIM2_DET		191
+#define BCM281XX_PIN_SIM2_RESETN	192
+#define BCM281XX_PIN_SRI_C		193
+#define BCM281XX_PIN_SRI_D		194
+#define BCM281XX_PIN_SRI_E		195
+#define BCM281XX_PIN_SSP_EXTCLK		196
+#define BCM281XX_PIN_SSP0_CLK		197
+#define BCM281XX_PIN_SSP0_FS		198
+#define BCM281XX_PIN_SSP0_RXD		199
+#define BCM281XX_PIN_SSP0_TXD		200
+#define BCM281XX_PIN_SSP2_CLK		201
+#define BCM281XX_PIN_SSP2_FS_0		202
+#define BCM281XX_PIN_SSP2_FS_1		203
+#define BCM281XX_PIN_SSP2_FS_2		204
+#define BCM281XX_PIN_SSP2_FS_3		205
+#define BCM281XX_PIN_SSP2_RXD_0		206
+#define BCM281XX_PIN_SSP2_RXD_1		207
+#define BCM281XX_PIN_SSP2_TXD_0		208
+#define BCM281XX_PIN_SSP2_TXD_1		209
+#define BCM281XX_PIN_SSP3_CLK		210
+#define BCM281XX_PIN_SSP3_FS		211
+#define BCM281XX_PIN_SSP3_RXD		212
+#define BCM281XX_PIN_SSP3_TXD		213
+#define BCM281XX_PIN_SSP4_CLK		214
+#define BCM281XX_PIN_SSP4_FS		215
+#define BCM281XX_PIN_SSP4_RXD		216
+#define BCM281XX_PIN_SSP4_TXD		217
+#define BCM281XX_PIN_SSP5_CLK		218
+#define BCM281XX_PIN_SSP5_FS		219
+#define BCM281XX_PIN_SSP5_RXD		220
+#define BCM281XX_PIN_SSP5_TXD		221
+#define BCM281XX_PIN_SSP6_CLK		222
+#define BCM281XX_PIN_SSP6_FS		223
+#define BCM281XX_PIN_SSP6_RXD		224
+#define BCM281XX_PIN_SSP6_TXD		225
+#define BCM281XX_PIN_STAT_1		226
+#define BCM281XX_PIN_STAT_2		227
+#define BCM281XX_PIN_SYSCLKEN		228
+#define BCM281XX_PIN_TRACECLK		229
+#define BCM281XX_PIN_TRACEDT00		230
+#define BCM281XX_PIN_TRACEDT01		231
+#define BCM281XX_PIN_TRACEDT02		232
+#define BCM281XX_PIN_TRACEDT03		233
+#define BCM281XX_PIN_TRACEDT04		234
+#define BCM281XX_PIN_TRACEDT05		235
+#define BCM281XX_PIN_TRACEDT06		236
+#define BCM281XX_PIN_TRACEDT07		237
+#define BCM281XX_PIN_TRACEDT08		238
+#define BCM281XX_PIN_TRACEDT09		239
+#define BCM281XX_PIN_TRACEDT10		240
+#define BCM281XX_PIN_TRACEDT11		241
+#define BCM281XX_PIN_TRACEDT12		242
+#define BCM281XX_PIN_TRACEDT13		243
+#define BCM281XX_PIN_TRACEDT14		244
+#define BCM281XX_PIN_TRACEDT15		245
+#define BCM281XX_PIN_TXDATA3G0		246
+#define BCM281XX_PIN_TXPWRIND		247
+#define BCM281XX_PIN_UARTB1_UCTS	248
+#define BCM281XX_PIN_UARTB1_URTS	249
+#define BCM281XX_PIN_UARTB1_URXD	250
+#define BCM281XX_PIN_UARTB1_UTXD	251
+#define BCM281XX_PIN_UARTB2_URXD	252
+#define BCM281XX_PIN_UARTB2_UTXD	253
+#define BCM281XX_PIN_UARTB3_UCTS	254
+#define BCM281XX_PIN_UARTB3_URTS	255
+#define BCM281XX_PIN_UARTB3_URXD	256
+#define BCM281XX_PIN_UARTB3_UTXD	257
+#define BCM281XX_PIN_UARTB4_UCTS	258
+#define BCM281XX_PIN_UARTB4_URTS	259
+#define BCM281XX_PIN_UARTB4_URXD	260
+#define BCM281XX_PIN_UARTB4_UTXD	261
+#define BCM281XX_PIN_VC_CAM1_SCL	262
+#define BCM281XX_PIN_VC_CAM1_SDA	263
+#define BCM281XX_PIN_VC_CAM2_SCL	264
+#define BCM281XX_PIN_VC_CAM2_SDA	265
+#define BCM281XX_PIN_VC_CAM3_SCL	266
+#define BCM281XX_PIN_VC_CAM3_SDA	267
+
+#define BCM281XX_PIN_DESC(a, b, c) \
+	{ .number = a, .name = b, .drv_data = &c##_pin }
+
+/*
+ * Pin description definition.  The order here must be the same as defined in
+ * the PADCTRLREG block in the RDB, since the pin number is used as an index
+ * into this array.
+ */
+static const struct pinctrl_pin_desc bcm281xx_pinctrl_pins[] = {
+	BCM281XX_PIN_DESC(BCM281XX_PIN_ADCSYNC, "adcsync", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BAT_RM, "bat_rm", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SCL, "bsc1_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SDA, "bsc1_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SCL, "bsc2_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SDA, "bsc2_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLASSGPWR, "classgpwr", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLK_CX8, "clk_cx8", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_0, "clkout_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_1, "clkout_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_2, "clkout_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_3, "clkout_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_0, "clkreq_in_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_1, "clkreq_in_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ1, "cws_sys_req1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ2, "cws_sys_req2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ3, "cws_sys_req3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_CLK, "digmic1_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_DQ, "digmic1_dq", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_CLK, "digmic2_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_DQ, "digmic2_dq", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN13, "gpen13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN14, "gpen14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN15, "gpen15", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO00, "gpio00", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO01, "gpio01", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO02, "gpio02", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO03, "gpio03", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO04, "gpio04", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO05, "gpio05", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO06, "gpio06", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO07, "gpio07", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO08, "gpio08", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO09, "gpio09", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO10, "gpio10", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO11, "gpio11", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO12, "gpio12", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO13, "gpio13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO14, "gpio14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_PABLANK, "gps_pablank", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_TMARK, "gps_tmark", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SCL, "hdmi_scl", hdmi),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SDA, "hdmi_sda", hdmi),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DM, "ic_dm", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DP, "ic_dp", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_0, "kp_col_ip_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_1, "kp_col_ip_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_2, "kp_col_ip_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_3, "kp_col_ip_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_0, "kp_row_op_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_1, "kp_row_op_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_2, "kp_row_op_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_3, "kp_row_op_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_0, "lcd_b_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_1, "lcd_b_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_2, "lcd_b_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_3, "lcd_b_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_4, "lcd_b_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_5, "lcd_b_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_6, "lcd_b_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_7, "lcd_b_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_0, "lcd_g_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_1, "lcd_g_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_2, "lcd_g_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_3, "lcd_g_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_4, "lcd_g_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_5, "lcd_g_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_6, "lcd_g_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_7, "lcd_g_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_HSYNC, "lcd_hsync", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_OE, "lcd_oe", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_PCLK, "lcd_pclk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_0, "lcd_r_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_1, "lcd_r_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_2, "lcd_r_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_3, "lcd_r_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_4, "lcd_r_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_5, "lcd_r_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_6, "lcd_r_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_7, "lcd_r_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_VSYNC, "lcd_vsync", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO0, "mdmgpio0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO1, "mdmgpio1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO2, "mdmgpio2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO3, "mdmgpio3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO4, "mdmgpio4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO5, "mdmgpio5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO6, "mdmgpio6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO7, "mdmgpio7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO8, "mdmgpio8", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_0, "mphi_data_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_1, "mphi_data_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_2, "mphi_data_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_3, "mphi_data_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_4, "mphi_data_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_5, "mphi_data_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_6, "mphi_data_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_7, "mphi_data_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_8, "mphi_data_8", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_9, "mphi_data_9", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_10, "mphi_data_10", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_11, "mphi_data_11", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_12, "mphi_data_12", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_13, "mphi_data_13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_14, "mphi_data_14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_15, "mphi_data_15", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HA0, "mphi_ha0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT0, "mphi_hat0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT1, "mphi_hat1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE0_N, "mphi_hce0_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE1_N, "mphi_hce1_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HRD_N, "mphi_hrd_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HWR_N, "mphi_hwr_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN0, "mphi_run0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN1, "mphi_run1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_DATA, "mtx_scan_data", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_0, "nand_ad_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_1, "nand_ad_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_2, "nand_ad_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_3, "nand_ad_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_4, "nand_ad_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_5, "nand_ad_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_6, "nand_ad_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_7, "nand_ad_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_ALE, "nand_ale", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_0, "nand_cen_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_1, "nand_cen_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CLE, "nand_cle", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_OEN, "nand_oen", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_0, "nand_rdy_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_1, "nand_rdy_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WEN, "nand_wen", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WP, "nand_wp", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PC1, "pc1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PC2, "pc2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_INT, "pmu_int", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SCL, "pmu_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SDA, "pmu_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g",
+		std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXC, "rgmii_0_rxc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXC, "rgmii_0_txc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXC, "rgmii_1_rxc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXC, "rgmii_1_txc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RTXDATA2G_TXDATA3G1,
+		"rtxdata2g_txdata3g1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2",
+		std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G0, "rxdata3g0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G1, "rxdata3g1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G2, "rxdata3g2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CLK, "sdio1_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CMD, "sdio1_cmd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_0, "sdio1_data_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_1, "sdio1_data_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_2, "sdio1_data_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_3, "sdio1_data_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CLK, "sdio4_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CMD, "sdio4_cmd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_0, "sdio4_data_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_1, "sdio4_data_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_2, "sdio4_data_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_3, "sdio4_data_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_CLK, "sim_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DATA, "sim_data", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DET, "sim_det", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_RESETN, "sim_resetn", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_CLK, "sim2_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DATA, "sim2_data", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DET, "sim2_det", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_RESETN, "sim2_resetn", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_C, "sri_c", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_D, "sri_d", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_E, "sri_e", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP_EXTCLK, "ssp_extclk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_CLK, "ssp0_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_FS, "ssp0_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_RXD, "ssp0_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_TXD, "ssp0_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_CLK, "ssp2_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_0, "ssp2_fs_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_1, "ssp2_fs_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_2, "ssp2_fs_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_3, "ssp2_fs_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_0, "ssp2_rxd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_1, "ssp2_rxd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_0, "ssp2_txd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_1, "ssp2_txd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_CLK, "ssp3_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_FS, "ssp3_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_RXD, "ssp3_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_TXD, "ssp3_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_CLK, "ssp4_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_FS, "ssp4_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_RXD, "ssp4_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_TXD, "ssp4_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_CLK, "ssp5_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_FS, "ssp5_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_RXD, "ssp5_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_TXD, "ssp5_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_CLK, "ssp6_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_FS, "ssp6_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_RXD, "ssp6_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_TXD, "ssp6_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_1, "stat_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_2, "stat_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SYSCLKEN, "sysclken", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACECLK, "traceclk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT00, "tracedt00", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT01, "tracedt01", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT02, "tracedt02", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT03, "tracedt03", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT04, "tracedt04", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT05, "tracedt05", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT06, "tracedt06", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT07, "tracedt07", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT08, "tracedt08", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT09, "tracedt09", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT10, "tracedt10", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT11, "tracedt11", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT12, "tracedt12", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT13, "tracedt13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT14, "tracedt14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT15, "tracedt15", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TXDATA3G0, "txdata3g0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TXPWRIND, "txpwrind", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UCTS, "uartb1_ucts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URTS, "uartb1_urts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URXD, "uartb1_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UTXD, "uartb1_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_URXD, "uartb2_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_UTXD, "uartb2_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UCTS, "uartb3_ucts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URTS, "uartb3_urts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URXD, "uartb3_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UTXD, "uartb3_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UCTS, "uartb4_ucts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URTS, "uartb4_urts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URXD, "uartb4_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UTXD, "uartb4_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c),
+};
+
+static const char * const bcm281xx_alt_groups[] = {
+	"adcsync",
+	"bat_rm",
+	"bsc1_scl",
+	"bsc1_sda",
+	"bsc2_scl",
+	"bsc2_sda",
+	"classgpwr",
+	"clk_cx8",
+	"clkout_0",
+	"clkout_1",
+	"clkout_2",
+	"clkout_3",
+	"clkreq_in_0",
+	"clkreq_in_1",
+	"cws_sys_req1",
+	"cws_sys_req2",
+	"cws_sys_req3",
+	"digmic1_clk",
+	"digmic1_dq",
+	"digmic2_clk",
+	"digmic2_dq",
+	"gpen13",
+	"gpen14",
+	"gpen15",
+	"gpio00",
+	"gpio01",
+	"gpio02",
+	"gpio03",
+	"gpio04",
+	"gpio05",
+	"gpio06",
+	"gpio07",
+	"gpio08",
+	"gpio09",
+	"gpio10",
+	"gpio11",
+	"gpio12",
+	"gpio13",
+	"gpio14",
+	"gps_pablank",
+	"gps_tmark",
+	"hdmi_scl",
+	"hdmi_sda",
+	"ic_dm",
+	"ic_dp",
+	"kp_col_ip_0",
+	"kp_col_ip_1",
+	"kp_col_ip_2",
+	"kp_col_ip_3",
+	"kp_row_op_0",
+	"kp_row_op_1",
+	"kp_row_op_2",
+	"kp_row_op_3",
+	"lcd_b_0",
+	"lcd_b_1",
+	"lcd_b_2",
+	"lcd_b_3",
+	"lcd_b_4",
+	"lcd_b_5",
+	"lcd_b_6",
+	"lcd_b_7",
+	"lcd_g_0",
+	"lcd_g_1",
+	"lcd_g_2",
+	"lcd_g_3",
+	"lcd_g_4",
+	"lcd_g_5",
+	"lcd_g_6",
+	"lcd_g_7",
+	"lcd_hsync",
+	"lcd_oe",
+	"lcd_pclk",
+	"lcd_r_0",
+	"lcd_r_1",
+	"lcd_r_2",
+	"lcd_r_3",
+	"lcd_r_4",
+	"lcd_r_5",
+	"lcd_r_6",
+	"lcd_r_7",
+	"lcd_vsync",
+	"mdmgpio0",
+	"mdmgpio1",
+	"mdmgpio2",
+	"mdmgpio3",
+	"mdmgpio4",
+	"mdmgpio5",
+	"mdmgpio6",
+	"mdmgpio7",
+	"mdmgpio8",
+	"mphi_data_0",
+	"mphi_data_1",
+	"mphi_data_2",
+	"mphi_data_3",
+	"mphi_data_4",
+	"mphi_data_5",
+	"mphi_data_6",
+	"mphi_data_7",
+	"mphi_data_8",
+	"mphi_data_9",
+	"mphi_data_10",
+	"mphi_data_11",
+	"mphi_data_12",
+	"mphi_data_13",
+	"mphi_data_14",
+	"mphi_data_15",
+	"mphi_ha0",
+	"mphi_hat0",
+	"mphi_hat1",
+	"mphi_hce0_n",
+	"mphi_hce1_n",
+	"mphi_hrd_n",
+	"mphi_hwr_n",
+	"mphi_run0",
+	"mphi_run1",
+	"mtx_scan_clk",
+	"mtx_scan_data",
+	"nand_ad_0",
+	"nand_ad_1",
+	"nand_ad_2",
+	"nand_ad_3",
+	"nand_ad_4",
+	"nand_ad_5",
+	"nand_ad_6",
+	"nand_ad_7",
+	"nand_ale",
+	"nand_cen_0",
+	"nand_cen_1",
+	"nand_cle",
+	"nand_oen",
+	"nand_rdy_0",
+	"nand_rdy_1",
+	"nand_wen",
+	"nand_wp",
+	"pc1",
+	"pc2",
+	"pmu_int",
+	"pmu_scl",
+	"pmu_sda",
+	"rfst2g_mtsloten3g",
+	"rgmii_0_rx_ctl",
+	"rgmii_0_rxc",
+	"rgmii_0_rxd_0",
+	"rgmii_0_rxd_1",
+	"rgmii_0_rxd_2",
+	"rgmii_0_rxd_3",
+	"rgmii_0_tx_ctl",
+	"rgmii_0_txc",
+	"rgmii_0_txd_0",
+	"rgmii_0_txd_1",
+	"rgmii_0_txd_2",
+	"rgmii_0_txd_3",
+	"rgmii_1_rx_ctl",
+	"rgmii_1_rxc",
+	"rgmii_1_rxd_0",
+	"rgmii_1_rxd_1",
+	"rgmii_1_rxd_2",
+	"rgmii_1_rxd_3",
+	"rgmii_1_tx_ctl",
+	"rgmii_1_txc",
+	"rgmii_1_txd_0",
+	"rgmii_1_txd_1",
+	"rgmii_1_txd_2",
+	"rgmii_1_txd_3",
+	"rgmii_gpio_0",
+	"rgmii_gpio_1",
+	"rgmii_gpio_2",
+	"rgmii_gpio_3",
+	"rtxdata2g_txdata3g1",
+	"rtxen2g_txdata3g2",
+	"rxdata3g0",
+	"rxdata3g1",
+	"rxdata3g2",
+	"sdio1_clk",
+	"sdio1_cmd",
+	"sdio1_data_0",
+	"sdio1_data_1",
+	"sdio1_data_2",
+	"sdio1_data_3",
+	"sdio4_clk",
+	"sdio4_cmd",
+	"sdio4_data_0",
+	"sdio4_data_1",
+	"sdio4_data_2",
+	"sdio4_data_3",
+	"sim_clk",
+	"sim_data",
+	"sim_det",
+	"sim_resetn",
+	"sim2_clk",
+	"sim2_data",
+	"sim2_det",
+	"sim2_resetn",
+	"sri_c",
+	"sri_d",
+	"sri_e",
+	"ssp_extclk",
+	"ssp0_clk",
+	"ssp0_fs",
+	"ssp0_rxd",
+	"ssp0_txd",
+	"ssp2_clk",
+	"ssp2_fs_0",
+	"ssp2_fs_1",
+	"ssp2_fs_2",
+	"ssp2_fs_3",
+	"ssp2_rxd_0",
+	"ssp2_rxd_1",
+	"ssp2_txd_0",
+	"ssp2_txd_1",
+	"ssp3_clk",
+	"ssp3_fs",
+	"ssp3_rxd",
+	"ssp3_txd",
+	"ssp4_clk",
+	"ssp4_fs",
+	"ssp4_rxd",
+	"ssp4_txd",
+	"ssp5_clk",
+	"ssp5_fs",
+	"ssp5_rxd",
+	"ssp5_txd",
+	"ssp6_clk",
+	"ssp6_fs",
+	"ssp6_rxd",
+	"ssp6_txd",
+	"stat_1",
+	"stat_2",
+	"sysclken",
+	"traceclk",
+	"tracedt00",
+	"tracedt01",
+	"tracedt02",
+	"tracedt03",
+	"tracedt04",
+	"tracedt05",
+	"tracedt06",
+	"tracedt07",
+	"tracedt08",
+	"tracedt09",
+	"tracedt10",
+	"tracedt11",
+	"tracedt12",
+	"tracedt13",
+	"tracedt14",
+	"tracedt15",
+	"txdata3g0",
+	"txpwrind",
+	"uartb1_ucts",
+	"uartb1_urts",
+	"uartb1_urxd",
+	"uartb1_utxd",
+	"uartb2_urxd",
+	"uartb2_utxd",
+	"uartb3_ucts",
+	"uartb3_urts",
+	"uartb3_urxd",
+	"uartb3_utxd",
+	"uartb4_ucts",
+	"uartb4_urts",
+	"uartb4_urxd",
+	"uartb4_utxd",
+	"vc_cam1_scl",
+	"vc_cam1_sda",
+	"vc_cam2_scl",
+	"vc_cam2_sda",
+	"vc_cam3_scl",
+	"vc_cam3_sda",
+};
+
+/* Every pin can implement all ALT1-ALT4 functions */
+#define BCM281XX_PIN_FUNCTION(fcn_name)			\
+{							\
+	.name = #fcn_name,				\
+	.groups = bcm281xx_alt_groups,			\
+	.ngroups = ARRAY_SIZE(bcm281xx_alt_groups),	\
+}
+
+static const struct bcm281xx_pin_function bcm281xx_functions[] = {
+	BCM281XX_PIN_FUNCTION(alt1),
+	BCM281XX_PIN_FUNCTION(alt2),
+	BCM281XX_PIN_FUNCTION(alt3),
+	BCM281XX_PIN_FUNCTION(alt4),
+};
+
+static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = {
+	.pins = bcm281xx_pinctrl_pins,
+	.npins = ARRAY_SIZE(bcm281xx_pinctrl_pins),
+	.functions = bcm281xx_functions,
+	.nfunctions = ARRAY_SIZE(bcm281xx_functions),
+};
+
+static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev,
+						  unsigned pin)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	if (pin >= pdata->npins)
+		return BCM281XX_PIN_TYPE_UNKNOWN;
+
+	return *(enum bcm281xx_pin_type *)(pdata->pins[pin].drv_data);
+}
+
+#define BCM281XX_PIN_SHIFT(type, param) \
+	(BCM281XX_ ## type ## _PIN_REG_ ## param ## _SHIFT)
+
+#define BCM281XX_PIN_MASK(type, param) \
+	(BCM281XX_ ## type ## _PIN_REG_ ## param ## _MASK)
+
+/*
+ * This helper function is used to build up the value and mask used to write to
+ * a pin register, but does not actually write to the register.
+ */
+static inline void bcm281xx_pin_update(u32 *reg_val, u32 *reg_mask,
+				       u32 param_val, u32 param_shift,
+				       u32 param_mask)
+{
+	*reg_val &= ~param_mask;
+	*reg_val |= (param_val << param_shift) & param_mask;
+	*reg_mask |= param_mask;
+}
+
+static struct regmap_config bcm281xx_pinctrl_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = BCM281XX_PIN_VC_CAM3_SDA,
+};
+
+static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->npins;
+}
+
+static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+						   unsigned group)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->pins[group].name;
+}
+
+static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					   unsigned group,
+					   const unsigned **pins,
+					   unsigned *num_pins)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = &pdata->pins[group].number;
+	*num_pins = 1;
+
+	return 0;
+}
+
+static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+					  struct seq_file *s,
+					  unsigned offset)
+{
+	seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+
+static struct pinctrl_ops bcm281xx_pinctrl_ops = {
+	.get_groups_count = bcm281xx_pinctrl_get_groups_count,
+	.get_group_name = bcm281xx_pinctrl_get_group_name,
+	.get_group_pins = bcm281xx_pinctrl_get_group_pins,
+	.pin_dbg_show = bcm281xx_pinctrl_pin_dbg_show,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->nfunctions;
+}
+
+static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
+						 unsigned function)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->functions[function].name;
+}
+
+static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
+					   unsigned function,
+					   const char * const **groups,
+					   unsigned * const num_groups)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pdata->functions[function].groups;
+	*num_groups = pdata->functions[function].ngroups;
+
+	return 0;
+}
+
+static int bcm281xx_pinmux_enable(struct pinctrl_dev *pctldev,
+				  unsigned function,
+				  unsigned group)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	const struct bcm281xx_pin_function *f = &pdata->functions[function];
+	u32 offset = 4 * pdata->pins[group].number;
+	int rc = 0;
+
+	dev_dbg(pctldev->dev,
+		"%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n",
+		__func__, f->name, function, pdata->pins[group].name,
+		pdata->pins[group].number, offset);
+
+	rc = regmap_update_bits(pdata->regmap, offset,
+		BCM281XX_PIN_REG_F_SEL_MASK,
+		function << BCM281XX_PIN_REG_F_SEL_SHIFT);
+	if (rc)
+		dev_err(pctldev->dev,
+			"Error updating register for pin %s (%d).\n",
+			pdata->pins[group].name, pdata->pins[group].number);
+
+	return rc;
+}
+
+static struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = {
+	.get_functions_count = bcm281xx_pinctrl_get_fcns_count,
+	.get_function_name = bcm281xx_pinctrl_get_fcn_name,
+	.get_function_groups = bcm281xx_pinctrl_get_fcn_groups,
+	.enable = bcm281xx_pinmux_enable,
+};
+
+static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
+					   unsigned pin,
+					   unsigned long *config)
+{
+	return -ENOTSUPP;
+}
+
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev,
+				   unsigned pin,
+				   unsigned long *configs,
+				   unsigned num_configs,
+				   u32 *val,
+				   u32 *mask)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int i;
+	enum pin_config_param param;
+	u16 arg;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(STD, HYST),
+				BCM281XX_PIN_MASK(STD, HYST));
+			break;
+		/*
+		 * The pin bias can only be one of pull-up, pull-down, or
+		 * disable.  The user does not need to specify a value for the
+		 * property, and the default value from pinconf-generic is
+		 * ignored.
+		 */
+		case PIN_CONFIG_BIAS_DISABLE:
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_UP),
+				BCM281XX_PIN_MASK(STD, PULL_UP));
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_DN),
+				BCM281XX_PIN_MASK(STD, PULL_DN));
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			bcm281xx_pin_update(val, mask, 1,
+				BCM281XX_PIN_SHIFT(STD, PULL_UP),
+				BCM281XX_PIN_MASK(STD, PULL_UP));
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_DN),
+				BCM281XX_PIN_MASK(STD, PULL_DN));
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_UP),
+				BCM281XX_PIN_MASK(STD, PULL_UP));
+			bcm281xx_pin_update(val, mask, 1,
+				BCM281XX_PIN_SHIFT(STD, PULL_DN),
+				BCM281XX_PIN_MASK(STD, PULL_DN));
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(STD, SLEW),
+				BCM281XX_PIN_MASK(STD, SLEW));
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* inversed since register is for input _disable_ */
+			arg = (arg >= 1 ? 0 : 1);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(STD, INPUT_DIS),
+				BCM281XX_PIN_MASK(STD, INPUT_DIS));
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			/* Valid range is 2-16 mA, even numbers only */
+			if ((arg < 2) || (arg > 16) || (arg % 2)) {
+				dev_err(pctldev->dev,
+					"Invalid Drive Strength value (%d) for "
+					"pin %s (%d). Valid values are "
+					"(2..16) mA, even numbers only.\n",
+					arg, pdata->pins[pin].name, pin);
+				return -EINVAL;
+			}
+			bcm281xx_pin_update(val, mask, (arg/2)-1,
+				BCM281XX_PIN_SHIFT(STD, DRV_STR),
+				BCM281XX_PIN_MASK(STD, DRV_STR));
+			break;
+
+		default:
+			dev_err(pctldev->dev,
+				"Unrecognized pin config %d for pin %s (%d).\n",
+				param, pdata->pins[pin].name, pin);
+			return -EINVAL;
+
+		} /* switch config */
+	} /* for each config */
+
+	return 0;
+}
+
+/*
+ * The pull-up strength for an I2C pin is represented by bits 4-6 in the
+ * register with the following mapping:
+ *   0b000: No pull-up
+ *   0b001: 1200 Ohm
+ *   0b010: 1800 Ohm
+ *   0b011: 720 Ohm
+ *   0b100: 2700 Ohm
+ *   0b101: 831 Ohm
+ *   0b110: 1080 Ohm
+ *   0b111: 568 Ohm
+ * This array maps pull-up strength in Ohms to register values (1+index).
+ */
+static const u16 bcm281xx_pullup_map[] = {
+	1200, 1800, 720, 2700, 831, 1080, 568
+};
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
+				   unsigned pin,
+				   unsigned long *configs,
+				   unsigned num_configs,
+				   u32 *val,
+				   u32 *mask)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int i, j;
+	enum pin_config_param param;
+	u16 arg;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_PULL_UP:
+			for (j = 0; j < ARRAY_SIZE(bcm281xx_pullup_map); j++)
+				if (bcm281xx_pullup_map[j] == arg)
+					break;
+
+			if (j == ARRAY_SIZE(bcm281xx_pullup_map)) {
+				dev_err(pctldev->dev,
+					"Invalid pull-up value (%d) for pin %s "
+					"(%d). Valid values are 568, 720, 831, "
+					"1080, 1200, 1800, 2700 Ohms.\n",
+					arg, pdata->pins[pin].name, pin);
+				return -EINVAL;
+			}
+
+			bcm281xx_pin_update(val, mask, j+1,
+				BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+				BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+			break;
+
+		case PIN_CONFIG_BIAS_DISABLE:
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+				BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(I2C, SLEW),
+				BCM281XX_PIN_MASK(I2C, SLEW));
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* inversed since register is for input _disable_ */
+			arg = (arg >= 1 ? 0 : 1);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(I2C, INPUT_DIS),
+				BCM281XX_PIN_MASK(I2C, INPUT_DIS));
+			break;
+
+		default:
+			dev_err(pctldev->dev,
+				"Unrecognized pin config %d for pin %s (%d).\n",
+				param, pdata->pins[pin].name, pin);
+			return -EINVAL;
+
+		} /* switch config */
+	} /* for each config */
+
+	return 0;
+}
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
+				    unsigned pin,
+				    unsigned long *configs,
+				    unsigned num_configs,
+				    u32 *val,
+				    u32 *mask)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int i;
+	enum pin_config_param param;
+	u16 arg;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_SLEW_RATE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(HDMI, MODE),
+				BCM281XX_PIN_MASK(HDMI, MODE));
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* inversed since register is for input _disable_ */
+			arg = (arg >= 1 ? 0 : 1);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(HDMI, INPUT_DIS),
+				BCM281XX_PIN_MASK(HDMI, INPUT_DIS));
+			break;
+
+		default:
+			dev_err(pctldev->dev,
+				"Unrecognized pin config %d for pin %s (%d).\n",
+				param, pdata->pins[pin].name, pin);
+			return -EINVAL;
+
+		} /* switch config */
+	} /* for each config */
+
+	return 0;
+}
+
+static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
+					   unsigned pin,
+					   unsigned long *configs,
+					   unsigned num_configs)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	enum bcm281xx_pin_type pin_type;
+	u32 offset = 4 * pin;
+	u32 cfg_val, cfg_mask;
+	int rc;
+
+	cfg_val = 0;
+	cfg_mask = 0;
+	pin_type = pin_type_get(pctldev, pin);
+
+	/* Different pins have different configuration options */
+	switch (pin_type) {
+	case BCM281XX_PIN_TYPE_STD:
+		rc = bcm281xx_std_pin_update(pctldev, pin, configs,
+			num_configs, &cfg_val, &cfg_mask);
+		break;
+
+	case BCM281XX_PIN_TYPE_I2C:
+		rc = bcm281xx_i2c_pin_update(pctldev, pin, configs,
+			num_configs, &cfg_val, &cfg_mask);
+		break;
+
+	case BCM281XX_PIN_TYPE_HDMI:
+		rc = bcm281xx_hdmi_pin_update(pctldev, pin, configs,
+			num_configs, &cfg_val, &cfg_mask);
+		break;
+
+	default:
+		dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n",
+			pdata->pins[pin].name, pin);
+		return -EINVAL;
+
+	} /* switch pin type */
+
+	if (rc)
+		return rc;
+
+	dev_dbg(pctldev->dev,
+		"%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n",
+		__func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask);
+
+	rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val);
+	if (rc) {
+		dev_err(pctldev->dev,
+			"Error updating register for pin %s (%d).\n",
+			pdata->pins[pin].name, pin);
+		return rc;
+	}
+
+	return 0;
+}
+
+static struct pinconf_ops bcm281xx_pinctrl_pinconf_ops = {
+	.pin_config_get = bcm281xx_pinctrl_pin_config_get,
+	.pin_config_set = bcm281xx_pinctrl_pin_config_set,
+};
+
+static struct pinctrl_desc bcm281xx_pinctrl_desc = {
+	/* name, pins, npins members initialized in probe function */
+	.pctlops = &bcm281xx_pinctrl_ops,
+	.pmxops = &bcm281xx_pinctrl_pinmux_ops,
+	.confops = &bcm281xx_pinctrl_pinconf_ops,
+	.owner = THIS_MODULE,
+};
+
+int __init bcm281xx_pinctrl_probe(struct platform_device *pdev)
+{
+	struct bcm281xx_pinctrl_data *pdata = &bcm281xx_pinctrl;
+	struct resource *res;
+	struct pinctrl_dev *pctl;
+
+	/* So far We can assume there is only 1 bank of registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing MEM resource\n");
+		return -ENODEV;
+	}
+
+	pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdata->reg_base)) {
+		dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
+		return -ENODEV;
+	}
+
+	/* Initialize the dynamic part of pinctrl_desc */
+	pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base,
+		&bcm281xx_pinctrl_regmap_config);
+	if (IS_ERR(pdata->regmap)) {
+		dev_err(&pdev->dev, "Regmap MMIO init failed.\n");
+		return -ENODEV;
+	}
+
+	bcm281xx_pinctrl_desc.name = dev_name(&pdev->dev);
+	bcm281xx_pinctrl_desc.pins = bcm281xx_pinctrl.pins;
+	bcm281xx_pinctrl_desc.npins = bcm281xx_pinctrl.npins;
+
+	pctl = pinctrl_register(&bcm281xx_pinctrl_desc,
+				&pdev->dev,
+				pdata);
+	if (!pctl) {
+		dev_err(&pdev->dev, "Failed to register pinctrl\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, pdata);
+
+	return 0;
+}
+
+static struct of_device_id bcm281xx_pinctrl_of_match[] = {
+	{ .compatible = "brcm,bcm11351-pinctrl", },
+	{ },
+};
+
+static struct platform_driver bcm281xx_pinctrl_driver = {
+	.driver = {
+		.name = "bcm281xx-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = bcm281xx_pinctrl_of_match,
+	},
+};
+
+module_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe);
+
+MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
+MODULE_AUTHOR("Sherman Yin <syin@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom BCM281xx pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-capri.c b/drivers/pinctrl/pinctrl-capri.c
deleted file mode 100644
index eb2500212147..000000000000
--- a/drivers/pinctrl/pinctrl-capri.c
+++ /dev/null
@@ -1,1454 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include "core.h"
-#include "pinctrl-utils.h"
-
-/* Capri Pin Control Registers Definitions */
-
-/* Function Select bits are the same for all pin control registers */
-#define CAPRI_PIN_REG_F_SEL_MASK		0x0700
-#define CAPRI_PIN_REG_F_SEL_SHIFT		8
-
-/* Standard pin register */
-#define CAPRI_STD_PIN_REG_DRV_STR_MASK		0x0007
-#define CAPRI_STD_PIN_REG_DRV_STR_SHIFT		0
-#define CAPRI_STD_PIN_REG_INPUT_DIS_MASK	0x0008
-#define CAPRI_STD_PIN_REG_INPUT_DIS_SHIFT	3
-#define CAPRI_STD_PIN_REG_SLEW_MASK		0x0010
-#define CAPRI_STD_PIN_REG_SLEW_SHIFT		4
-#define CAPRI_STD_PIN_REG_PULL_UP_MASK		0x0020
-#define CAPRI_STD_PIN_REG_PULL_UP_SHIFT		5
-#define CAPRI_STD_PIN_REG_PULL_DN_MASK		0x0040
-#define CAPRI_STD_PIN_REG_PULL_DN_SHIFT		6
-#define CAPRI_STD_PIN_REG_HYST_MASK		0x0080
-#define CAPRI_STD_PIN_REG_HYST_SHIFT		7
-
-/* I2C pin register */
-#define CAPRI_I2C_PIN_REG_INPUT_DIS_MASK	0x0004
-#define CAPRI_I2C_PIN_REG_INPUT_DIS_SHIFT	2
-#define CAPRI_I2C_PIN_REG_SLEW_MASK		0x0008
-#define CAPRI_I2C_PIN_REG_SLEW_SHIFT		3
-#define CAPRI_I2C_PIN_REG_PULL_UP_STR_MASK	0x0070
-#define CAPRI_I2C_PIN_REG_PULL_UP_STR_SHIFT	4
-
-/* HDMI pin register */
-#define CAPRI_HDMI_PIN_REG_INPUT_DIS_MASK	0x0008
-#define CAPRI_HDMI_PIN_REG_INPUT_DIS_SHIFT	3
-#define CAPRI_HDMI_PIN_REG_MODE_MASK		0x0010
-#define CAPRI_HDMI_PIN_REG_MODE_SHIFT		4
-
-/**
- * capri_pin_type - types of pin register
- */
-enum capri_pin_type {
-	CAPRI_PIN_TYPE_UNKNOWN = 0,
-	CAPRI_PIN_TYPE_STD,
-	CAPRI_PIN_TYPE_I2C,
-	CAPRI_PIN_TYPE_HDMI,
-};
-
-static enum capri_pin_type std_pin = CAPRI_PIN_TYPE_STD;
-static enum capri_pin_type i2c_pin = CAPRI_PIN_TYPE_I2C;
-static enum capri_pin_type hdmi_pin = CAPRI_PIN_TYPE_HDMI;
-
-/**
- * capri_pin_function- define pin function
- */
-struct capri_pin_function {
-	const char *name;
-	const char * const *groups;
-	const unsigned ngroups;
-};
-
-/**
- * capri_pinctrl_data - Broadcom-specific pinctrl data
- * @reg_base - base of pinctrl registers
- */
-struct capri_pinctrl_data {
-	void __iomem *reg_base;
-
-	/* List of all pins */
-	const struct pinctrl_pin_desc *pins;
-	const unsigned npins;
-
-	const struct capri_pin_function *functions;
-	const unsigned nfunctions;
-
-	struct regmap *regmap;
-};
-
-/*
- * Pin number definition.  The order here must be the same as defined in the
- * PADCTRLREG block in the RDB.
- */
-#define CAPRI_PIN_ADCSYNC		0
-#define CAPRI_PIN_BAT_RM		1
-#define CAPRI_PIN_BSC1_SCL		2
-#define CAPRI_PIN_BSC1_SDA		3
-#define CAPRI_PIN_BSC2_SCL		4
-#define CAPRI_PIN_BSC2_SDA		5
-#define CAPRI_PIN_CLASSGPWR		6
-#define CAPRI_PIN_CLK_CX8		7
-#define CAPRI_PIN_CLKOUT_0		8
-#define CAPRI_PIN_CLKOUT_1		9
-#define CAPRI_PIN_CLKOUT_2		10
-#define CAPRI_PIN_CLKOUT_3		11
-#define CAPRI_PIN_CLKREQ_IN_0		12
-#define CAPRI_PIN_CLKREQ_IN_1		13
-#define CAPRI_PIN_CWS_SYS_REQ1		14
-#define CAPRI_PIN_CWS_SYS_REQ2		15
-#define CAPRI_PIN_CWS_SYS_REQ3		16
-#define CAPRI_PIN_DIGMIC1_CLK		17
-#define CAPRI_PIN_DIGMIC1_DQ		18
-#define CAPRI_PIN_DIGMIC2_CLK		19
-#define CAPRI_PIN_DIGMIC2_DQ		20
-#define CAPRI_PIN_GPEN13		21
-#define CAPRI_PIN_GPEN14		22
-#define CAPRI_PIN_GPEN15		23
-#define CAPRI_PIN_GPIO00		24
-#define CAPRI_PIN_GPIO01		25
-#define CAPRI_PIN_GPIO02		26
-#define CAPRI_PIN_GPIO03		27
-#define CAPRI_PIN_GPIO04		28
-#define CAPRI_PIN_GPIO05		29
-#define CAPRI_PIN_GPIO06		30
-#define CAPRI_PIN_GPIO07		31
-#define CAPRI_PIN_GPIO08		32
-#define CAPRI_PIN_GPIO09		33
-#define CAPRI_PIN_GPIO10		34
-#define CAPRI_PIN_GPIO11		35
-#define CAPRI_PIN_GPIO12		36
-#define CAPRI_PIN_GPIO13		37
-#define CAPRI_PIN_GPIO14		38
-#define CAPRI_PIN_GPS_PABLANK		39
-#define CAPRI_PIN_GPS_TMARK		40
-#define CAPRI_PIN_HDMI_SCL		41
-#define CAPRI_PIN_HDMI_SDA		42
-#define CAPRI_PIN_IC_DM			43
-#define CAPRI_PIN_IC_DP			44
-#define CAPRI_PIN_KP_COL_IP_0		45
-#define CAPRI_PIN_KP_COL_IP_1		46
-#define CAPRI_PIN_KP_COL_IP_2		47
-#define CAPRI_PIN_KP_COL_IP_3		48
-#define CAPRI_PIN_KP_ROW_OP_0		49
-#define CAPRI_PIN_KP_ROW_OP_1		50
-#define CAPRI_PIN_KP_ROW_OP_2		51
-#define CAPRI_PIN_KP_ROW_OP_3		52
-#define CAPRI_PIN_LCD_B_0		53
-#define CAPRI_PIN_LCD_B_1		54
-#define CAPRI_PIN_LCD_B_2		55
-#define CAPRI_PIN_LCD_B_3		56
-#define CAPRI_PIN_LCD_B_4		57
-#define CAPRI_PIN_LCD_B_5		58
-#define CAPRI_PIN_LCD_B_6		59
-#define CAPRI_PIN_LCD_B_7		60
-#define CAPRI_PIN_LCD_G_0		61
-#define CAPRI_PIN_LCD_G_1		62
-#define CAPRI_PIN_LCD_G_2		63
-#define CAPRI_PIN_LCD_G_3		64
-#define CAPRI_PIN_LCD_G_4		65
-#define CAPRI_PIN_LCD_G_5		66
-#define CAPRI_PIN_LCD_G_6		67
-#define CAPRI_PIN_LCD_G_7		68
-#define CAPRI_PIN_LCD_HSYNC		69
-#define CAPRI_PIN_LCD_OE		70
-#define CAPRI_PIN_LCD_PCLK		71
-#define CAPRI_PIN_LCD_R_0		72
-#define CAPRI_PIN_LCD_R_1		73
-#define CAPRI_PIN_LCD_R_2		74
-#define CAPRI_PIN_LCD_R_3		75
-#define CAPRI_PIN_LCD_R_4		76
-#define CAPRI_PIN_LCD_R_5		77
-#define CAPRI_PIN_LCD_R_6		78
-#define CAPRI_PIN_LCD_R_7		79
-#define CAPRI_PIN_LCD_VSYNC		80
-#define CAPRI_PIN_MDMGPIO0		81
-#define CAPRI_PIN_MDMGPIO1		82
-#define CAPRI_PIN_MDMGPIO2		83
-#define CAPRI_PIN_MDMGPIO3		84
-#define CAPRI_PIN_MDMGPIO4		85
-#define CAPRI_PIN_MDMGPIO5		86
-#define CAPRI_PIN_MDMGPIO6		87
-#define CAPRI_PIN_MDMGPIO7		88
-#define CAPRI_PIN_MDMGPIO8		89
-#define CAPRI_PIN_MPHI_DATA_0		90
-#define CAPRI_PIN_MPHI_DATA_1		91
-#define CAPRI_PIN_MPHI_DATA_2		92
-#define CAPRI_PIN_MPHI_DATA_3		93
-#define CAPRI_PIN_MPHI_DATA_4		94
-#define CAPRI_PIN_MPHI_DATA_5		95
-#define CAPRI_PIN_MPHI_DATA_6		96
-#define CAPRI_PIN_MPHI_DATA_7		97
-#define CAPRI_PIN_MPHI_DATA_8		98
-#define CAPRI_PIN_MPHI_DATA_9		99
-#define CAPRI_PIN_MPHI_DATA_10		100
-#define CAPRI_PIN_MPHI_DATA_11		101
-#define CAPRI_PIN_MPHI_DATA_12		102
-#define CAPRI_PIN_MPHI_DATA_13		103
-#define CAPRI_PIN_MPHI_DATA_14		104
-#define CAPRI_PIN_MPHI_DATA_15		105
-#define CAPRI_PIN_MPHI_HA0		106
-#define CAPRI_PIN_MPHI_HAT0		107
-#define CAPRI_PIN_MPHI_HAT1		108
-#define CAPRI_PIN_MPHI_HCE0_N		109
-#define CAPRI_PIN_MPHI_HCE1_N		110
-#define CAPRI_PIN_MPHI_HRD_N		111
-#define CAPRI_PIN_MPHI_HWR_N		112
-#define CAPRI_PIN_MPHI_RUN0		113
-#define CAPRI_PIN_MPHI_RUN1		114
-#define CAPRI_PIN_MTX_SCAN_CLK		115
-#define CAPRI_PIN_MTX_SCAN_DATA		116
-#define CAPRI_PIN_NAND_AD_0		117
-#define CAPRI_PIN_NAND_AD_1		118
-#define CAPRI_PIN_NAND_AD_2		119
-#define CAPRI_PIN_NAND_AD_3		120
-#define CAPRI_PIN_NAND_AD_4		121
-#define CAPRI_PIN_NAND_AD_5		122
-#define CAPRI_PIN_NAND_AD_6		123
-#define CAPRI_PIN_NAND_AD_7		124
-#define CAPRI_PIN_NAND_ALE		125
-#define CAPRI_PIN_NAND_CEN_0		126
-#define CAPRI_PIN_NAND_CEN_1		127
-#define CAPRI_PIN_NAND_CLE		128
-#define CAPRI_PIN_NAND_OEN		129
-#define CAPRI_PIN_NAND_RDY_0		130
-#define CAPRI_PIN_NAND_RDY_1		131
-#define CAPRI_PIN_NAND_WEN		132
-#define CAPRI_PIN_NAND_WP		133
-#define CAPRI_PIN_PC1			134
-#define CAPRI_PIN_PC2			135
-#define CAPRI_PIN_PMU_INT		136
-#define CAPRI_PIN_PMU_SCL		137
-#define CAPRI_PIN_PMU_SDA		138
-#define CAPRI_PIN_RFST2G_MTSLOTEN3G	139
-#define CAPRI_PIN_RGMII_0_RX_CTL	140
-#define CAPRI_PIN_RGMII_0_RXC		141
-#define CAPRI_PIN_RGMII_0_RXD_0		142
-#define CAPRI_PIN_RGMII_0_RXD_1		143
-#define CAPRI_PIN_RGMII_0_RXD_2		144
-#define CAPRI_PIN_RGMII_0_RXD_3		145
-#define CAPRI_PIN_RGMII_0_TX_CTL	146
-#define CAPRI_PIN_RGMII_0_TXC		147
-#define CAPRI_PIN_RGMII_0_TXD_0		148
-#define CAPRI_PIN_RGMII_0_TXD_1		149
-#define CAPRI_PIN_RGMII_0_TXD_2		150
-#define CAPRI_PIN_RGMII_0_TXD_3		151
-#define CAPRI_PIN_RGMII_1_RX_CTL	152
-#define CAPRI_PIN_RGMII_1_RXC		153
-#define CAPRI_PIN_RGMII_1_RXD_0		154
-#define CAPRI_PIN_RGMII_1_RXD_1		155
-#define CAPRI_PIN_RGMII_1_RXD_2		156
-#define CAPRI_PIN_RGMII_1_RXD_3		157
-#define CAPRI_PIN_RGMII_1_TX_CTL	158
-#define CAPRI_PIN_RGMII_1_TXC		159
-#define CAPRI_PIN_RGMII_1_TXD_0		160
-#define CAPRI_PIN_RGMII_1_TXD_1		161
-#define CAPRI_PIN_RGMII_1_TXD_2		162
-#define CAPRI_PIN_RGMII_1_TXD_3		163
-#define CAPRI_PIN_RGMII_GPIO_0		164
-#define CAPRI_PIN_RGMII_GPIO_1		165
-#define CAPRI_PIN_RGMII_GPIO_2		166
-#define CAPRI_PIN_RGMII_GPIO_3		167
-#define CAPRI_PIN_RTXDATA2G_TXDATA3G1	168
-#define CAPRI_PIN_RTXEN2G_TXDATA3G2	169
-#define CAPRI_PIN_RXDATA3G0		170
-#define CAPRI_PIN_RXDATA3G1		171
-#define CAPRI_PIN_RXDATA3G2		172
-#define CAPRI_PIN_SDIO1_CLK		173
-#define CAPRI_PIN_SDIO1_CMD		174
-#define CAPRI_PIN_SDIO1_DATA_0		175
-#define CAPRI_PIN_SDIO1_DATA_1		176
-#define CAPRI_PIN_SDIO1_DATA_2		177
-#define CAPRI_PIN_SDIO1_DATA_3		178
-#define CAPRI_PIN_SDIO4_CLK		179
-#define CAPRI_PIN_SDIO4_CMD		180
-#define CAPRI_PIN_SDIO4_DATA_0		181
-#define CAPRI_PIN_SDIO4_DATA_1		182
-#define CAPRI_PIN_SDIO4_DATA_2		183
-#define CAPRI_PIN_SDIO4_DATA_3		184
-#define CAPRI_PIN_SIM_CLK		185
-#define CAPRI_PIN_SIM_DATA		186
-#define CAPRI_PIN_SIM_DET		187
-#define CAPRI_PIN_SIM_RESETN		188
-#define CAPRI_PIN_SIM2_CLK		189
-#define CAPRI_PIN_SIM2_DATA		190
-#define CAPRI_PIN_SIM2_DET		191
-#define CAPRI_PIN_SIM2_RESETN		192
-#define CAPRI_PIN_SRI_C			193
-#define CAPRI_PIN_SRI_D			194
-#define CAPRI_PIN_SRI_E			195
-#define CAPRI_PIN_SSP_EXTCLK		196
-#define CAPRI_PIN_SSP0_CLK		197
-#define CAPRI_PIN_SSP0_FS		198
-#define CAPRI_PIN_SSP0_RXD		199
-#define CAPRI_PIN_SSP0_TXD		200
-#define CAPRI_PIN_SSP2_CLK		201
-#define CAPRI_PIN_SSP2_FS_0		202
-#define CAPRI_PIN_SSP2_FS_1		203
-#define CAPRI_PIN_SSP2_FS_2		204
-#define CAPRI_PIN_SSP2_FS_3		205
-#define CAPRI_PIN_SSP2_RXD_0		206
-#define CAPRI_PIN_SSP2_RXD_1		207
-#define CAPRI_PIN_SSP2_TXD_0		208
-#define CAPRI_PIN_SSP2_TXD_1		209
-#define CAPRI_PIN_SSP3_CLK		210
-#define CAPRI_PIN_SSP3_FS		211
-#define CAPRI_PIN_SSP3_RXD		212
-#define CAPRI_PIN_SSP3_TXD		213
-#define CAPRI_PIN_SSP4_CLK		214
-#define CAPRI_PIN_SSP4_FS		215
-#define CAPRI_PIN_SSP4_RXD		216
-#define CAPRI_PIN_SSP4_TXD		217
-#define CAPRI_PIN_SSP5_CLK		218
-#define CAPRI_PIN_SSP5_FS		219
-#define CAPRI_PIN_SSP5_RXD		220
-#define CAPRI_PIN_SSP5_TXD		221
-#define CAPRI_PIN_SSP6_CLK		222
-#define CAPRI_PIN_SSP6_FS		223
-#define CAPRI_PIN_SSP6_RXD		224
-#define CAPRI_PIN_SSP6_TXD		225
-#define CAPRI_PIN_STAT_1		226
-#define CAPRI_PIN_STAT_2		227
-#define CAPRI_PIN_SYSCLKEN		228
-#define CAPRI_PIN_TRACECLK		229
-#define CAPRI_PIN_TRACEDT00		230
-#define CAPRI_PIN_TRACEDT01		231
-#define CAPRI_PIN_TRACEDT02		232
-#define CAPRI_PIN_TRACEDT03		233
-#define CAPRI_PIN_TRACEDT04		234
-#define CAPRI_PIN_TRACEDT05		235
-#define CAPRI_PIN_TRACEDT06		236
-#define CAPRI_PIN_TRACEDT07		237
-#define CAPRI_PIN_TRACEDT08		238
-#define CAPRI_PIN_TRACEDT09		239
-#define CAPRI_PIN_TRACEDT10		240
-#define CAPRI_PIN_TRACEDT11		241
-#define CAPRI_PIN_TRACEDT12		242
-#define CAPRI_PIN_TRACEDT13		243
-#define CAPRI_PIN_TRACEDT14		244
-#define CAPRI_PIN_TRACEDT15		245
-#define CAPRI_PIN_TXDATA3G0		246
-#define CAPRI_PIN_TXPWRIND		247
-#define CAPRI_PIN_UARTB1_UCTS		248
-#define CAPRI_PIN_UARTB1_URTS		249
-#define CAPRI_PIN_UARTB1_URXD		250
-#define CAPRI_PIN_UARTB1_UTXD		251
-#define CAPRI_PIN_UARTB2_URXD		252
-#define CAPRI_PIN_UARTB2_UTXD		253
-#define CAPRI_PIN_UARTB3_UCTS		254
-#define CAPRI_PIN_UARTB3_URTS		255
-#define CAPRI_PIN_UARTB3_URXD		256
-#define CAPRI_PIN_UARTB3_UTXD		257
-#define CAPRI_PIN_UARTB4_UCTS		258
-#define CAPRI_PIN_UARTB4_URTS		259
-#define CAPRI_PIN_UARTB4_URXD		260
-#define CAPRI_PIN_UARTB4_UTXD		261
-#define CAPRI_PIN_VC_CAM1_SCL		262
-#define CAPRI_PIN_VC_CAM1_SDA		263
-#define CAPRI_PIN_VC_CAM2_SCL		264
-#define CAPRI_PIN_VC_CAM2_SDA		265
-#define CAPRI_PIN_VC_CAM3_SCL		266
-#define CAPRI_PIN_VC_CAM3_SDA		267
-
-#define CAPRI_PIN_DESC(a, b, c) \
-	{ .number = a, .name = b, .drv_data = &c##_pin }
-
-/*
- * Pin description definition.  The order here must be the same as defined in
- * the PADCTRLREG block in the RDB, since the pin number is used as an index
- * into this array.
- */
-static const struct pinctrl_pin_desc capri_pinctrl_pins[] = {
-	CAPRI_PIN_DESC(CAPRI_PIN_ADCSYNC, "adcsync", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_BAT_RM, "bat_rm", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_BSC1_SCL, "bsc1_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_BSC1_SDA, "bsc1_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_BSC2_SCL, "bsc2_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_BSC2_SDA, "bsc2_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLASSGPWR, "classgpwr", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLK_CX8, "clk_cx8", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKOUT_0, "clkout_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKOUT_1, "clkout_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKOUT_2, "clkout_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKOUT_3, "clkout_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKREQ_IN_0, "clkreq_in_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKREQ_IN_1, "clkreq_in_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CWS_SYS_REQ1, "cws_sys_req1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CWS_SYS_REQ2, "cws_sys_req2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CWS_SYS_REQ3, "cws_sys_req3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_DIGMIC1_CLK, "digmic1_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_DIGMIC1_DQ, "digmic1_dq", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_DIGMIC2_CLK, "digmic2_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_DIGMIC2_DQ, "digmic2_dq", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPEN13, "gpen13", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPEN14, "gpen14", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPEN15, "gpen15", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO00, "gpio00", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO01, "gpio01", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO02, "gpio02", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO03, "gpio03", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO04, "gpio04", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO05, "gpio05", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO06, "gpio06", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO07, "gpio07", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO08, "gpio08", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO09, "gpio09", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO10, "gpio10", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO11, "gpio11", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO12, "gpio12", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO13, "gpio13", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO14, "gpio14", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPS_PABLANK, "gps_pablank", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPS_TMARK, "gps_tmark", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_HDMI_SCL, "hdmi_scl", hdmi),
-	CAPRI_PIN_DESC(CAPRI_PIN_HDMI_SDA, "hdmi_sda", hdmi),
-	CAPRI_PIN_DESC(CAPRI_PIN_IC_DM, "ic_dm", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_IC_DP, "ic_dp", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_COL_IP_0, "kp_col_ip_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_COL_IP_1, "kp_col_ip_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_COL_IP_2, "kp_col_ip_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_COL_IP_3, "kp_col_ip_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_ROW_OP_0, "kp_row_op_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_ROW_OP_1, "kp_row_op_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_ROW_OP_2, "kp_row_op_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_ROW_OP_3, "kp_row_op_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_0, "lcd_b_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_1, "lcd_b_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_2, "lcd_b_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_3, "lcd_b_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_4, "lcd_b_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_5, "lcd_b_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_6, "lcd_b_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_7, "lcd_b_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_0, "lcd_g_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_1, "lcd_g_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_2, "lcd_g_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_3, "lcd_g_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_4, "lcd_g_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_5, "lcd_g_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_6, "lcd_g_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_7, "lcd_g_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_HSYNC, "lcd_hsync", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_OE, "lcd_oe", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_PCLK, "lcd_pclk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_0, "lcd_r_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_1, "lcd_r_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_2, "lcd_r_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_3, "lcd_r_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_4, "lcd_r_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_5, "lcd_r_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_6, "lcd_r_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_7, "lcd_r_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_VSYNC, "lcd_vsync", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO0, "mdmgpio0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO1, "mdmgpio1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO2, "mdmgpio2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO3, "mdmgpio3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO4, "mdmgpio4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO5, "mdmgpio5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO6, "mdmgpio6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO7, "mdmgpio7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO8, "mdmgpio8", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_0, "mphi_data_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_1, "mphi_data_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_2, "mphi_data_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_3, "mphi_data_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_4, "mphi_data_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_5, "mphi_data_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_6, "mphi_data_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_7, "mphi_data_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_8, "mphi_data_8", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_9, "mphi_data_9", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_10, "mphi_data_10", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_11, "mphi_data_11", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_12, "mphi_data_12", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_13, "mphi_data_13", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_14, "mphi_data_14", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_15, "mphi_data_15", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HA0, "mphi_ha0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HAT0, "mphi_hat0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HAT1, "mphi_hat1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HCE0_N, "mphi_hce0_n", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HCE1_N, "mphi_hce1_n", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HRD_N, "mphi_hrd_n", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HWR_N, "mphi_hwr_n", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_RUN0, "mphi_run0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_RUN1, "mphi_run1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MTX_SCAN_DATA, "mtx_scan_data", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_0, "nand_ad_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_1, "nand_ad_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_2, "nand_ad_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_3, "nand_ad_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_4, "nand_ad_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_5, "nand_ad_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_6, "nand_ad_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_7, "nand_ad_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_ALE, "nand_ale", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_CEN_0, "nand_cen_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_CEN_1, "nand_cen_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_CLE, "nand_cle", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_OEN, "nand_oen", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_RDY_0, "nand_rdy_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_RDY_1, "nand_rdy_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_WEN, "nand_wen", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_WP, "nand_wp", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_PC1, "pc1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_PC2, "pc2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_PMU_INT, "pmu_int", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_PMU_SCL, "pmu_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_PMU_SDA, "pmu_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXC, "rgmii_0_rxc", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXC, "rgmii_0_txc", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXC, "rgmii_1_rxc", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXC, "rgmii_1_txc", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RTXDATA2G_TXDATA3G1, "rtxdata2g_txdata3g1",
-		std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RXDATA3G0, "rxdata3g0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RXDATA3G1, "rxdata3g1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RXDATA3G2, "rxdata3g2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_CLK, "sdio1_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_CMD, "sdio1_cmd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_DATA_0, "sdio1_data_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_DATA_1, "sdio1_data_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_DATA_2, "sdio1_data_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_DATA_3, "sdio1_data_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_CLK, "sdio4_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_CMD, "sdio4_cmd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_DATA_0, "sdio4_data_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_DATA_1, "sdio4_data_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_DATA_2, "sdio4_data_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_DATA_3, "sdio4_data_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM_CLK, "sim_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM_DATA, "sim_data", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM_DET, "sim_det", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM_RESETN, "sim_resetn", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM2_CLK, "sim2_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM2_DATA, "sim2_data", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM2_DET, "sim2_det", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM2_RESETN, "sim2_resetn", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SRI_C, "sri_c", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SRI_D, "sri_d", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SRI_E, "sri_e", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP_EXTCLK, "ssp_extclk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP0_CLK, "ssp0_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP0_FS, "ssp0_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP0_RXD, "ssp0_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP0_TXD, "ssp0_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_CLK, "ssp2_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_FS_0, "ssp2_fs_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_FS_1, "ssp2_fs_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_FS_2, "ssp2_fs_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_FS_3, "ssp2_fs_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_RXD_0, "ssp2_rxd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_RXD_1, "ssp2_rxd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_TXD_0, "ssp2_txd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_TXD_1, "ssp2_txd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP3_CLK, "ssp3_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP3_FS, "ssp3_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP3_RXD, "ssp3_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP3_TXD, "ssp3_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP4_CLK, "ssp4_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP4_FS, "ssp4_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP4_RXD, "ssp4_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP4_TXD, "ssp4_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP5_CLK, "ssp5_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP5_FS, "ssp5_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP5_RXD, "ssp5_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP5_TXD, "ssp5_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP6_CLK, "ssp6_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP6_FS, "ssp6_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP6_RXD, "ssp6_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP6_TXD, "ssp6_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_STAT_1, "stat_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_STAT_2, "stat_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SYSCLKEN, "sysclken", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACECLK, "traceclk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT00, "tracedt00", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT01, "tracedt01", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT02, "tracedt02", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT03, "tracedt03", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT04, "tracedt04", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT05, "tracedt05", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT06, "tracedt06", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT07, "tracedt07", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT08, "tracedt08", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT09, "tracedt09", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT10, "tracedt10", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT11, "tracedt11", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT12, "tracedt12", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT13, "tracedt13", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT14, "tracedt14", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT15, "tracedt15", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TXDATA3G0, "txdata3g0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TXPWRIND, "txpwrind", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB1_UCTS, "uartb1_ucts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB1_URTS, "uartb1_urts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB1_URXD, "uartb1_urxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB1_UTXD, "uartb1_utxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB2_URXD, "uartb2_urxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB2_UTXD, "uartb2_utxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB3_UCTS, "uartb3_ucts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB3_URTS, "uartb3_urts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB3_URXD, "uartb3_urxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB3_UTXD, "uartb3_utxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB4_UCTS, "uartb4_ucts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB4_URTS, "uartb4_urts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB4_URXD, "uartb4_urxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB4_UTXD, "uartb4_utxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c),
-};
-
-static const char * const capri_alt_groups[] = {
-	"adcsync",
-	"bat_rm",
-	"bsc1_scl",
-	"bsc1_sda",
-	"bsc2_scl",
-	"bsc2_sda",
-	"classgpwr",
-	"clk_cx8",
-	"clkout_0",
-	"clkout_1",
-	"clkout_2",
-	"clkout_3",
-	"clkreq_in_0",
-	"clkreq_in_1",
-	"cws_sys_req1",
-	"cws_sys_req2",
-	"cws_sys_req3",
-	"digmic1_clk",
-	"digmic1_dq",
-	"digmic2_clk",
-	"digmic2_dq",
-	"gpen13",
-	"gpen14",
-	"gpen15",
-	"gpio00",
-	"gpio01",
-	"gpio02",
-	"gpio03",
-	"gpio04",
-	"gpio05",
-	"gpio06",
-	"gpio07",
-	"gpio08",
-	"gpio09",
-	"gpio10",
-	"gpio11",
-	"gpio12",
-	"gpio13",
-	"gpio14",
-	"gps_pablank",
-	"gps_tmark",
-	"hdmi_scl",
-	"hdmi_sda",
-	"ic_dm",
-	"ic_dp",
-	"kp_col_ip_0",
-	"kp_col_ip_1",
-	"kp_col_ip_2",
-	"kp_col_ip_3",
-	"kp_row_op_0",
-	"kp_row_op_1",
-	"kp_row_op_2",
-	"kp_row_op_3",
-	"lcd_b_0",
-	"lcd_b_1",
-	"lcd_b_2",
-	"lcd_b_3",
-	"lcd_b_4",
-	"lcd_b_5",
-	"lcd_b_6",
-	"lcd_b_7",
-	"lcd_g_0",
-	"lcd_g_1",
-	"lcd_g_2",
-	"lcd_g_3",
-	"lcd_g_4",
-	"lcd_g_5",
-	"lcd_g_6",
-	"lcd_g_7",
-	"lcd_hsync",
-	"lcd_oe",
-	"lcd_pclk",
-	"lcd_r_0",
-	"lcd_r_1",
-	"lcd_r_2",
-	"lcd_r_3",
-	"lcd_r_4",
-	"lcd_r_5",
-	"lcd_r_6",
-	"lcd_r_7",
-	"lcd_vsync",
-	"mdmgpio0",
-	"mdmgpio1",
-	"mdmgpio2",
-	"mdmgpio3",
-	"mdmgpio4",
-	"mdmgpio5",
-	"mdmgpio6",
-	"mdmgpio7",
-	"mdmgpio8",
-	"mphi_data_0",
-	"mphi_data_1",
-	"mphi_data_2",
-	"mphi_data_3",
-	"mphi_data_4",
-	"mphi_data_5",
-	"mphi_data_6",
-	"mphi_data_7",
-	"mphi_data_8",
-	"mphi_data_9",
-	"mphi_data_10",
-	"mphi_data_11",
-	"mphi_data_12",
-	"mphi_data_13",
-	"mphi_data_14",
-	"mphi_data_15",
-	"mphi_ha0",
-	"mphi_hat0",
-	"mphi_hat1",
-	"mphi_hce0_n",
-	"mphi_hce1_n",
-	"mphi_hrd_n",
-	"mphi_hwr_n",
-	"mphi_run0",
-	"mphi_run1",
-	"mtx_scan_clk",
-	"mtx_scan_data",
-	"nand_ad_0",
-	"nand_ad_1",
-	"nand_ad_2",
-	"nand_ad_3",
-	"nand_ad_4",
-	"nand_ad_5",
-	"nand_ad_6",
-	"nand_ad_7",
-	"nand_ale",
-	"nand_cen_0",
-	"nand_cen_1",
-	"nand_cle",
-	"nand_oen",
-	"nand_rdy_0",
-	"nand_rdy_1",
-	"nand_wen",
-	"nand_wp",
-	"pc1",
-	"pc2",
-	"pmu_int",
-	"pmu_scl",
-	"pmu_sda",
-	"rfst2g_mtsloten3g",
-	"rgmii_0_rx_ctl",
-	"rgmii_0_rxc",
-	"rgmii_0_rxd_0",
-	"rgmii_0_rxd_1",
-	"rgmii_0_rxd_2",
-	"rgmii_0_rxd_3",
-	"rgmii_0_tx_ctl",
-	"rgmii_0_txc",
-	"rgmii_0_txd_0",
-	"rgmii_0_txd_1",
-	"rgmii_0_txd_2",
-	"rgmii_0_txd_3",
-	"rgmii_1_rx_ctl",
-	"rgmii_1_rxc",
-	"rgmii_1_rxd_0",
-	"rgmii_1_rxd_1",
-	"rgmii_1_rxd_2",
-	"rgmii_1_rxd_3",
-	"rgmii_1_tx_ctl",
-	"rgmii_1_txc",
-	"rgmii_1_txd_0",
-	"rgmii_1_txd_1",
-	"rgmii_1_txd_2",
-	"rgmii_1_txd_3",
-	"rgmii_gpio_0",
-	"rgmii_gpio_1",
-	"rgmii_gpio_2",
-	"rgmii_gpio_3",
-	"rtxdata2g_txdata3g1",
-	"rtxen2g_txdata3g2",
-	"rxdata3g0",
-	"rxdata3g1",
-	"rxdata3g2",
-	"sdio1_clk",
-	"sdio1_cmd",
-	"sdio1_data_0",
-	"sdio1_data_1",
-	"sdio1_data_2",
-	"sdio1_data_3",
-	"sdio4_clk",
-	"sdio4_cmd",
-	"sdio4_data_0",
-	"sdio4_data_1",
-	"sdio4_data_2",
-	"sdio4_data_3",
-	"sim_clk",
-	"sim_data",
-	"sim_det",
-	"sim_resetn",
-	"sim2_clk",
-	"sim2_data",
-	"sim2_det",
-	"sim2_resetn",
-	"sri_c",
-	"sri_d",
-	"sri_e",
-	"ssp_extclk",
-	"ssp0_clk",
-	"ssp0_fs",
-	"ssp0_rxd",
-	"ssp0_txd",
-	"ssp2_clk",
-	"ssp2_fs_0",
-	"ssp2_fs_1",
-	"ssp2_fs_2",
-	"ssp2_fs_3",
-	"ssp2_rxd_0",
-	"ssp2_rxd_1",
-	"ssp2_txd_0",
-	"ssp2_txd_1",
-	"ssp3_clk",
-	"ssp3_fs",
-	"ssp3_rxd",
-	"ssp3_txd",
-	"ssp4_clk",
-	"ssp4_fs",
-	"ssp4_rxd",
-	"ssp4_txd",
-	"ssp5_clk",
-	"ssp5_fs",
-	"ssp5_rxd",
-	"ssp5_txd",
-	"ssp6_clk",
-	"ssp6_fs",
-	"ssp6_rxd",
-	"ssp6_txd",
-	"stat_1",
-	"stat_2",
-	"sysclken",
-	"traceclk",
-	"tracedt00",
-	"tracedt01",
-	"tracedt02",
-	"tracedt03",
-	"tracedt04",
-	"tracedt05",
-	"tracedt06",
-	"tracedt07",
-	"tracedt08",
-	"tracedt09",
-	"tracedt10",
-	"tracedt11",
-	"tracedt12",
-	"tracedt13",
-	"tracedt14",
-	"tracedt15",
-	"txdata3g0",
-	"txpwrind",
-	"uartb1_ucts",
-	"uartb1_urts",
-	"uartb1_urxd",
-	"uartb1_utxd",
-	"uartb2_urxd",
-	"uartb2_utxd",
-	"uartb3_ucts",
-	"uartb3_urts",
-	"uartb3_urxd",
-	"uartb3_utxd",
-	"uartb4_ucts",
-	"uartb4_urts",
-	"uartb4_urxd",
-	"uartb4_utxd",
-	"vc_cam1_scl",
-	"vc_cam1_sda",
-	"vc_cam2_scl",
-	"vc_cam2_sda",
-	"vc_cam3_scl",
-	"vc_cam3_sda",
-};
-
-/* Every pin can implement all ALT1-ALT4 functions */
-#define CAPRI_PIN_FUNCTION(fcn_name)			\
-{							\
-	.name = #fcn_name,				\
-	.groups = capri_alt_groups,			\
-	.ngroups = ARRAY_SIZE(capri_alt_groups),	\
-}
-
-static const struct capri_pin_function capri_functions[] = {
-	CAPRI_PIN_FUNCTION(alt1),
-	CAPRI_PIN_FUNCTION(alt2),
-	CAPRI_PIN_FUNCTION(alt3),
-	CAPRI_PIN_FUNCTION(alt4),
-};
-
-static struct capri_pinctrl_data capri_pinctrl = {
-	.pins = capri_pinctrl_pins,
-	.npins = ARRAY_SIZE(capri_pinctrl_pins),
-	.functions = capri_functions,
-	.nfunctions = ARRAY_SIZE(capri_functions),
-};
-
-static inline enum capri_pin_type pin_type_get(struct pinctrl_dev *pctldev,
-					       unsigned pin)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	if (pin >= pdata->npins)
-		return CAPRI_PIN_TYPE_UNKNOWN;
-
-	return *(enum capri_pin_type *)(pdata->pins[pin].drv_data);
-}
-
-#define CAPRI_PIN_SHIFT(type, param) \
-	(CAPRI_ ## type ## _PIN_REG_ ## param ## _SHIFT)
-
-#define CAPRI_PIN_MASK(type, param) \
-	(CAPRI_ ## type ## _PIN_REG_ ## param ## _MASK)
-
-/*
- * This helper function is used to build up the value and mask used to write to
- * a pin register, but does not actually write to the register.
- */
-static inline void capri_pin_update(u32 *reg_val, u32 *reg_mask, u32 param_val,
-				    u32 param_shift, u32 param_mask)
-{
-	*reg_val &= ~param_mask;
-	*reg_val |= (param_val << param_shift) & param_mask;
-	*reg_mask |= param_mask;
-}
-
-static struct regmap_config capri_pinctrl_regmap_config = {
-	.reg_bits = 32,
-	.reg_stride = 4,
-	.val_bits = 32,
-	.max_register = CAPRI_PIN_VC_CAM3_SDA,
-};
-
-static int capri_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	return pdata->npins;
-}
-
-static const char *capri_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-						unsigned group)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	return pdata->pins[group].name;
-}
-
-static int capri_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-					unsigned group,
-					const unsigned **pins,
-					unsigned *num_pins)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	*pins = &pdata->pins[group].number;
-	*num_pins = 1;
-
-	return 0;
-}
-
-static void capri_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
-				       struct seq_file *s,
-				       unsigned offset)
-{
-	seq_printf(s, " %s", dev_name(pctldev->dev));
-}
-
-static struct pinctrl_ops capri_pinctrl_ops = {
-	.get_groups_count = capri_pinctrl_get_groups_count,
-	.get_group_name = capri_pinctrl_get_group_name,
-	.get_group_pins = capri_pinctrl_get_group_pins,
-	.pin_dbg_show = capri_pinctrl_pin_dbg_show,
-	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
-	.dt_free_map = pinctrl_utils_dt_free_map,
-};
-
-static int capri_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	return pdata->nfunctions;
-}
-
-static const char *capri_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
-					      unsigned function)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	return pdata->functions[function].name;
-}
-
-static int capri_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
-					unsigned function,
-					const char * const **groups,
-					unsigned * const num_groups)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	*groups = pdata->functions[function].groups;
-	*num_groups = pdata->functions[function].ngroups;
-
-	return 0;
-}
-
-static int capri_pinmux_enable(struct pinctrl_dev *pctldev,
-			       unsigned function,
-			       unsigned group)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	const struct capri_pin_function *f = &pdata->functions[function];
-	u32 offset = 4 * pdata->pins[group].number;
-	int rc = 0;
-
-	dev_dbg(pctldev->dev,
-		"%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n",
-		__func__, f->name, function, pdata->pins[group].name,
-		pdata->pins[group].number, offset);
-
-	rc = regmap_update_bits(pdata->regmap, offset, CAPRI_PIN_REG_F_SEL_MASK,
-			function << CAPRI_PIN_REG_F_SEL_SHIFT);
-	if (rc)
-		dev_err(pctldev->dev,
-			"Error updating register for pin %s (%d).\n",
-			pdata->pins[group].name, pdata->pins[group].number);
-
-	return rc;
-}
-
-static struct pinmux_ops capri_pinctrl_pinmux_ops = {
-	.get_functions_count = capri_pinctrl_get_fcns_count,
-	.get_function_name = capri_pinctrl_get_fcn_name,
-	.get_function_groups = capri_pinctrl_get_fcn_groups,
-	.enable = capri_pinmux_enable,
-};
-
-static int capri_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
-					unsigned pin,
-					unsigned long *config)
-{
-	return -ENOTSUPP;
-}
-
-
-/* Goes through the configs and update register val/mask */
-static int capri_std_pin_update(struct pinctrl_dev *pctldev,
-				unsigned pin,
-				unsigned long *configs,
-				unsigned num_configs,
-				u32 *val,
-				u32 *mask)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	int i;
-	enum pin_config_param param;
-	u16 arg;
-
-	for (i = 0; i < num_configs; i++) {
-		param = pinconf_to_config_param(configs[i]);
-		arg = pinconf_to_config_argument(configs[i]);
-
-		switch (param) {
-		case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-			arg = (arg >= 1 ? 1 : 0);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(STD, HYST),
-					CAPRI_PIN_MASK(STD, HYST));
-			break;
-		/*
-		 * The pin bias can only be one of pull-up, pull-down, or
-		 * disable.  The user does not need to specify a value for the
-		 * property, and the default value from pinconf-generic is
-		 * ignored.
-		 */
-		case PIN_CONFIG_BIAS_DISABLE:
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(STD, PULL_UP),
-					CAPRI_PIN_MASK(STD, PULL_UP));
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(STD, PULL_DN),
-					CAPRI_PIN_MASK(STD, PULL_DN));
-			break;
-
-		case PIN_CONFIG_BIAS_PULL_UP:
-			capri_pin_update(val, mask, 1,
-					CAPRI_PIN_SHIFT(STD, PULL_UP),
-					CAPRI_PIN_MASK(STD, PULL_UP));
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(STD, PULL_DN),
-					CAPRI_PIN_MASK(STD, PULL_DN));
-			break;
-
-		case PIN_CONFIG_BIAS_PULL_DOWN:
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(STD, PULL_UP),
-					CAPRI_PIN_MASK(STD, PULL_UP));
-			capri_pin_update(val, mask, 1,
-					CAPRI_PIN_SHIFT(STD, PULL_DN),
-					CAPRI_PIN_MASK(STD, PULL_DN));
-			break;
-
-		case PIN_CONFIG_SLEW_RATE:
-			arg = (arg >= 1 ? 1 : 0);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(STD, SLEW),
-					CAPRI_PIN_MASK(STD, SLEW));
-			break;
-
-		case PIN_CONFIG_INPUT_ENABLE:
-			/* inversed since register is for input _disable_ */
-			arg = (arg >= 1 ? 0 : 1);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(STD, INPUT_DIS),
-					CAPRI_PIN_MASK(STD, INPUT_DIS));
-			break;
-
-		case PIN_CONFIG_DRIVE_STRENGTH:
-			/* Valid range is 2-16 mA, even numbers only */
-			if ((arg < 2) || (arg > 16) || (arg % 2)) {
-				dev_err(pctldev->dev,
-					"Invalid Drive Strength value (%d) for "
-					"pin %s (%d). Valid values are "
-					"(2..16) mA, even numbers only.\n",
-					arg, pdata->pins[pin].name, pin);
-				return -EINVAL;
-			}
-			capri_pin_update(val, mask, (arg/2)-1,
-					CAPRI_PIN_SHIFT(STD, DRV_STR),
-					CAPRI_PIN_MASK(STD, DRV_STR));
-			break;
-
-		default:
-			dev_err(pctldev->dev,
-				"Unrecognized pin config %d for pin %s (%d).\n",
-				param, pdata->pins[pin].name, pin);
-			return -EINVAL;
-
-		} /* switch config */
-	} /* for each config */
-
-	return 0;
-}
-
-/*
- * The pull-up strength for an I2C pin is represented by bits 4-6 in the
- * register with the following mapping:
- *   0b000: No pull-up
- *   0b001: 1200 Ohm
- *   0b010: 1800 Ohm
- *   0b011: 720 Ohm
- *   0b100: 2700 Ohm
- *   0b101: 831 Ohm
- *   0b110: 1080 Ohm
- *   0b111: 568 Ohm
- * This array maps pull-up strength in Ohms to register values (1+index).
- */
-static const u16 capri_pullup_map[] = {1200, 1800, 720, 2700, 831, 1080, 568};
-
-/* Goes through the configs and update register val/mask */
-static int capri_i2c_pin_update(struct pinctrl_dev *pctldev,
-				unsigned pin,
-				unsigned long *configs,
-				unsigned num_configs,
-				u32 *val,
-				u32 *mask)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	int i, j;
-	enum pin_config_param param;
-	u16 arg;
-
-	for (i = 0; i < num_configs; i++) {
-		param = pinconf_to_config_param(configs[i]);
-		arg = pinconf_to_config_argument(configs[i]);
-
-		switch (param) {
-		case PIN_CONFIG_BIAS_PULL_UP:
-			for (j = 0; j < ARRAY_SIZE(capri_pullup_map); j++)
-				if (capri_pullup_map[j] == arg)
-					break;
-
-			if (j == ARRAY_SIZE(capri_pullup_map)) {
-				dev_err(pctldev->dev,
-					"Invalid pull-up value (%d) for pin %s "
-					"(%d). Valid values are 568, 720, 831, "
-					"1080, 1200, 1800, 2700 Ohms.\n",
-					arg, pdata->pins[pin].name, pin);
-				return -EINVAL;
-			}
-
-			capri_pin_update(val, mask, j+1,
-					CAPRI_PIN_SHIFT(I2C, PULL_UP_STR),
-					CAPRI_PIN_MASK(I2C, PULL_UP_STR));
-			break;
-
-		case PIN_CONFIG_BIAS_DISABLE:
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(I2C, PULL_UP_STR),
-					CAPRI_PIN_MASK(I2C, PULL_UP_STR));
-			break;
-
-		case PIN_CONFIG_SLEW_RATE:
-			arg = (arg >= 1 ? 1 : 0);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(I2C, SLEW),
-					CAPRI_PIN_MASK(I2C, SLEW));
-			break;
-
-		case PIN_CONFIG_INPUT_ENABLE:
-			/* inversed since register is for input _disable_ */
-			arg = (arg >= 1 ? 0 : 1);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(I2C, INPUT_DIS),
-					CAPRI_PIN_MASK(I2C, INPUT_DIS));
-			break;
-
-		default:
-			dev_err(pctldev->dev,
-				"Unrecognized pin config %d for pin %s (%d).\n",
-				param, pdata->pins[pin].name, pin);
-			return -EINVAL;
-
-		} /* switch config */
-	} /* for each config */
-
-	return 0;
-}
-
-/* Goes through the configs and update register val/mask */
-static int capri_hdmi_pin_update(struct pinctrl_dev *pctldev,
-				 unsigned pin,
-				 unsigned long *configs,
-				 unsigned num_configs,
-				 u32 *val,
-				 u32 *mask)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	int i;
-	enum pin_config_param param;
-	u16 arg;
-
-	for (i = 0; i < num_configs; i++) {
-		param = pinconf_to_config_param(configs[i]);
-		arg = pinconf_to_config_argument(configs[i]);
-
-		switch (param) {
-		case PIN_CONFIG_SLEW_RATE:
-			arg = (arg >= 1 ? 1 : 0);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(HDMI, MODE),
-					CAPRI_PIN_MASK(HDMI, MODE));
-			break;
-
-		case PIN_CONFIG_INPUT_ENABLE:
-			/* inversed since register is for input _disable_ */
-			arg = (arg >= 1 ? 0 : 1);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(HDMI, INPUT_DIS),
-					CAPRI_PIN_MASK(HDMI, INPUT_DIS));
-			break;
-
-		default:
-			dev_err(pctldev->dev,
-				"Unrecognized pin config %d for pin %s (%d).\n",
-				param, pdata->pins[pin].name, pin);
-			return -EINVAL;
-
-		} /* switch config */
-	} /* for each config */
-
-	return 0;
-}
-
-static int capri_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
-					unsigned pin,
-					unsigned long *configs,
-					unsigned num_configs)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	enum capri_pin_type pin_type;
-	u32 offset = 4 * pin;
-	u32 cfg_val, cfg_mask;
-	int rc;
-
-	cfg_val = 0;
-	cfg_mask = 0;
-	pin_type = pin_type_get(pctldev, pin);
-
-	/* Different pins have different configuration options */
-	switch (pin_type) {
-	case CAPRI_PIN_TYPE_STD:
-		rc = capri_std_pin_update(pctldev, pin, configs, num_configs,
-			&cfg_val, &cfg_mask);
-		break;
-
-	case CAPRI_PIN_TYPE_I2C:
-		rc = capri_i2c_pin_update(pctldev, pin, configs, num_configs,
-			&cfg_val, &cfg_mask);
-		break;
-
-	case CAPRI_PIN_TYPE_HDMI:
-		rc = capri_hdmi_pin_update(pctldev, pin, configs, num_configs,
-			&cfg_val, &cfg_mask);
-		break;
-
-	default:
-		dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n",
-			pdata->pins[pin].name, pin);
-		return -EINVAL;
-
-	} /* switch pin type */
-
-	if (rc)
-		return rc;
-
-	dev_dbg(pctldev->dev,
-		"%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n",
-		__func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask);
-
-	rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val);
-	if (rc) {
-		dev_err(pctldev->dev,
-			"Error updating register for pin %s (%d).\n",
-			pdata->pins[pin].name, pin);
-		return rc;
-	}
-
-	return 0;
-}
-
-static struct pinconf_ops capri_pinctrl_pinconf_ops = {
-	.pin_config_get = capri_pinctrl_pin_config_get,
-	.pin_config_set = capri_pinctrl_pin_config_set,
-};
-
-static struct pinctrl_desc capri_pinctrl_desc = {
-	/* name, pins, npins members initialized in probe function */
-	.pctlops = &capri_pinctrl_ops,
-	.pmxops = &capri_pinctrl_pinmux_ops,
-	.confops = &capri_pinctrl_pinconf_ops,
-	.owner = THIS_MODULE,
-};
-
-int __init capri_pinctrl_probe(struct platform_device *pdev)
-{
-	struct capri_pinctrl_data *pdata = &capri_pinctrl;
-	struct resource *res;
-	struct pinctrl_dev *pctl;
-
-	/* So far We can assume there is only 1 bank of registers */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Missing MEM resource\n");
-		return -ENODEV;
-	}
-
-	pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(pdata->reg_base)) {
-		dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
-		return -ENODEV;
-	}
-
-	/* Initialize the dynamic part of pinctrl_desc */
-	pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base,
-		&capri_pinctrl_regmap_config);
-	if (IS_ERR(pdata->regmap)) {
-		dev_err(&pdev->dev, "Regmap MMIO init failed.\n");
-		return -ENODEV;
-	}
-
-	capri_pinctrl_desc.name = dev_name(&pdev->dev);
-	capri_pinctrl_desc.pins = capri_pinctrl.pins;
-	capri_pinctrl_desc.npins = capri_pinctrl.npins;
-
-	pctl = pinctrl_register(&capri_pinctrl_desc,
-				&pdev->dev,
-				pdata);
-	if (!pctl) {
-		dev_err(&pdev->dev, "Failed to register pinctrl\n");
-		return -ENODEV;
-	}
-
-	platform_set_drvdata(pdev, pdata);
-
-	return 0;
-}
-
-static struct of_device_id capri_pinctrl_of_match[] = {
-	{ .compatible = "brcm,bcm11351-pinctrl", },
-	{ },
-};
-
-static struct platform_driver capri_pinctrl_driver = {
-	.driver = {
-		.name = "bcm-capri-pinctrl",
-		.owner = THIS_MODULE,
-		.of_match_table = capri_pinctrl_of_match,
-	},
-};
-
-module_platform_driver_probe(capri_pinctrl_driver, capri_pinctrl_probe);
-
-MODULE_AUTHOR("Sherman Yin <syin@broadcom.com>");
-MODULE_DESCRIPTION("Broadcom Capri pinctrl driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
index 38d579b47f31..e43fbce56598 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
@@ -665,7 +665,10 @@ static void msm_gpio_irq_ack(struct irq_data *d)
 	spin_lock_irqsave(&pctrl->lock, flags);
 
 	val = readl(pctrl->regs + g->intr_status_reg);
-	val &= ~BIT(g->intr_status_bit);
+	if (g->intr_ack_high)
+		val |= BIT(g->intr_status_bit);
+	else
+		val &= ~BIT(g->intr_status_bit);
 	writel(val, pctrl->regs + g->intr_status_reg);
 
 	if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
@@ -744,6 +747,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 			break;
 		case IRQ_TYPE_EDGE_BOTH:
 			val |= BIT(g->intr_detection_bit);
+			val |= BIT(g->intr_polarity_bit);
 			break;
 		case IRQ_TYPE_LEVEL_LOW:
 			break;
diff --git a/drivers/pinctrl/pinctrl-msm.h b/drivers/pinctrl/pinctrl-msm.h
index 8fbe9fb19f36..6e26f1b676d7 100644
--- a/drivers/pinctrl/pinctrl-msm.h
+++ b/drivers/pinctrl/pinctrl-msm.h
@@ -84,6 +84,7 @@ struct msm_pingroup {
 
 	unsigned intr_enable_bit:5;
 	unsigned intr_status_bit:5;
+	unsigned intr_ack_high:1;
 
 	unsigned intr_target_bit:5;
 	unsigned intr_raw_status_bit:5;
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 208341fd57d2..8f6f16ef73f3 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -877,7 +877,6 @@ static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip);
 	u32 status;
 
-	pr_err("PLONK IRQ %d\n", irq);
 	clk_enable(nmk_chip->clk);
 	status = readl(nmk_chip->addr + NMK_GPIO_IS);
 	clk_disable(nmk_chip->clk);
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 46dddc159286..96c60d230c13 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -342,7 +342,7 @@ static const struct pinctrl_ops rockchip_pctrl_ops = {
  * @pin: pin to change
  * @mux: new mux function to set
  */
-static void rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
+static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 {
 	struct rockchip_pinctrl *info = bank->drvdata;
 	void __iomem *reg = info->reg_base + info->ctrl->mux_offset;
@@ -350,6 +350,20 @@ static void rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	u8 bit;
 	u32 data;
 
+	/*
+	 * The first 16 pins of rk3188_bank0 are always gpios and do not have
+	 * a mux register at all.
+	 */
+	if (bank->bank_type == RK3188_BANK0 && pin < 16) {
+		if (mux != RK_FUNC_GPIO) {
+			dev_err(info->dev,
+				"pin %d only supports a gpio mux\n", pin);
+			return -ENOTSUPP;
+		} else {
+			return 0;
+		}
+	}
+
 	dev_dbg(info->dev, "setting mux of GPIO%d-%d to %d\n",
 						bank->bank_num, pin, mux);
 
@@ -365,6 +379,8 @@ static void rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	writel(data, reg);
 
 	spin_unlock_irqrestore(&bank->slock, flags);
+
+	return 0;
 }
 
 #define RK2928_PULL_OFFSET		0x118
@@ -560,7 +576,7 @@ static int rockchip_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
 	const unsigned int *pins = info->groups[group].pins;
 	const struct rockchip_pin_config *data = info->groups[group].data;
 	struct rockchip_pin_bank *bank;
-	int cnt;
+	int cnt, ret = 0;
 
 	dev_dbg(info->dev, "enable function %s group %s\n",
 		info->functions[selector].name, info->groups[group].name);
@@ -571,8 +587,18 @@ static int rockchip_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
 	 */
 	for (cnt = 0; cnt < info->groups[group].npins; cnt++) {
 		bank = pin_to_bank(info, pins[cnt]);
-		rockchip_set_mux(bank, pins[cnt] - bank->pin_base,
-				 data[cnt].func);
+		ret = rockchip_set_mux(bank, pins[cnt] - bank->pin_base,
+				       data[cnt].func);
+		if (ret)
+			break;
+	}
+
+	if (ret) {
+		/* revert the already done pin settings */
+		for (cnt--; cnt >= 0; cnt--)
+			rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0);
+
+		return ret;
 	}
 
 	return 0;
@@ -607,7 +633,7 @@ static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
 	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
 	struct rockchip_pin_bank *bank;
 	struct gpio_chip *chip;
-	int pin;
+	int pin, ret;
 	u32 data;
 
 	chip = range->gc;
@@ -617,7 +643,9 @@ static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
 	dev_dbg(info->dev, "gpio_direction for pin %u as %s-%d to %s\n",
 		 offset, range->name, pin, input ? "input" : "output");
 
-	rockchip_set_mux(bank, pin, RK_FUNC_GPIO);
+	ret = rockchip_set_mux(bank, pin, RK_FUNC_GPIO);
+	if (ret < 0)
+		return ret;
 
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	/* set bit to 1 for output, 0 for input */
@@ -1144,9 +1172,13 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 	u32 polarity;
 	u32 level;
 	u32 data;
+	int ret;
 
 	/* make sure the pin is configured as gpio input */
-	rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO);
+	ret = rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO);
+	if (ret < 0)
+		return ret;
+
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	data &= ~mask;
 	writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
@@ -1534,7 +1566,7 @@ static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
 		.nr_banks		= ARRAY_SIZE(rk3188_pin_banks),
 		.label			= "RK3188-GPIO",
 		.type			= RK3188,
-		.mux_offset		= 0x68,
+		.mux_offset		= 0x60,
 		.pull_calc_reg		= rk3188_calc_pull_reg_and_bit,
 };
 
diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c
index 8ad26b8bf418..cb2d4f0f9711 100644
--- a/drivers/pwm/pwm-spear.c
+++ b/drivers/pwm/pwm-spear.c
@@ -2,7 +2,7 @@
  * ST Microelectronics SPEAr Pulse Width Modulator driver
  *
  * Copyright (C) 2012 ST Microelectronics
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -264,6 +264,6 @@ static struct platform_driver spear_pwm_driver = {
 module_platform_driver(spear_pwm_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
 MODULE_ALIAS("platform:spear-pwm");
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 1990285296c6..c316051d9bda 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -1252,7 +1252,7 @@ static __init int sclp_initcall(void)
 		return rc;
 
 	sclp_pdev = platform_device_register_simple("sclp", -1, NULL, 0);
-	rc = PTR_RET(sclp_pdev);
+	rc = PTR_ERR_OR_ZERO(sclp_pdev);
 	if (rc)
 		goto fail_platform_driver_unregister;
 
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 6e8f90f84e49..6e14999f9e8f 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -515,7 +515,7 @@ static int __init sclp_detect_standby_memory(void)
 	if (rc)
 		goto out;
 	sclp_pdev = platform_device_register_simple("sclp_mem", -1, NULL, 0);
-	rc = PTR_RET(sclp_pdev);
+	rc = PTR_ERR_OR_ZERO(sclp_pdev);
 	if (rc)
 		goto out_driver;
 	sclp_add_standby_memory();
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 4eed38cd0af6..cd9c91909596 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -97,13 +97,16 @@ static void sclp_vt220_pm_event_fn(struct sclp_register *reg,
 static int __sclp_vt220_emit(struct sclp_vt220_request *request);
 static void sclp_vt220_emit_current(void);
 
-/* Registration structure for our interest in SCLP event buffers */
+/* Registration structure for SCLP output event buffers */
 static struct sclp_register sclp_vt220_register = {
 	.send_mask		= EVTYP_VT220MSG_MASK,
+	.pm_event_fn		= sclp_vt220_pm_event_fn,
+};
+
+/* Registration structure for SCLP input event buffers */
+static struct sclp_register sclp_vt220_register_input = {
 	.receive_mask		= EVTYP_VT220MSG_MASK,
-	.state_change_fn	= NULL,
 	.receiver_fn		= sclp_vt220_receiver_fn,
-	.pm_event_fn		= sclp_vt220_pm_event_fn,
 };
 
 
@@ -715,9 +718,14 @@ static int __init sclp_vt220_tty_init(void)
 	rc = tty_register_driver(driver);
 	if (rc)
 		goto out_init;
+	rc = sclp_register(&sclp_vt220_register_input);
+	if (rc)
+		goto out_reg;
 	sclp_vt220_driver = driver;
 	return 0;
 
+out_reg:
+	tty_unregister_driver(driver);
 out_init:
 	__sclp_vt220_cleanup();
 out_driver:
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index ea5efb426f75..22365f140bec 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -40,8 +40,6 @@ source "drivers/staging/olpc_dcon/Kconfig"
 
 source "drivers/staging/panel/Kconfig"
 
-source "drivers/staging/rtl8187se/Kconfig"
-
 source "drivers/staging/rtl8192u/Kconfig"
 
 source "drivers/staging/rtl8192e/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 86e020c2ad0d..fbe84ed2d048 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -12,7 +12,6 @@ obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_COMEDI)		+= comedi/
 obj-$(CONFIG_FB_OLPC_DCON)	+= olpc_dcon/
 obj-$(CONFIG_PANEL)		+= panel/
-obj-$(CONFIG_R8187SE)		+= rtl8187se/
 obj-$(CONFIG_RTL8192U)		+= rtl8192u/
 obj-$(CONFIG_RTL8192E)		+= rtl8192e/
 obj-$(CONFIG_R8712U)		+= rtl8712/
diff --git a/drivers/staging/comedi/comedi_buf.c b/drivers/staging/comedi/comedi_buf.c
index 924fce977985..257595016161 100644
--- a/drivers/staging/comedi/comedi_buf.c
+++ b/drivers/staging/comedi/comedi_buf.c
@@ -61,6 +61,8 @@ static void __comedi_buf_free(struct comedi_device *dev,
 			      struct comedi_subdevice *s)
 {
 	struct comedi_async *async = s->async;
+	struct comedi_buf_map *bm;
+	unsigned long flags;
 
 	if (async->prealloc_buf) {
 		vunmap(async->prealloc_buf);
@@ -68,8 +70,11 @@ static void __comedi_buf_free(struct comedi_device *dev,
 		async->prealloc_bufsz = 0;
 	}
 
-	comedi_buf_map_put(async->buf_map);
+	spin_lock_irqsave(&s->spin_lock, flags);
+	bm = async->buf_map;
 	async->buf_map = NULL;
+	spin_unlock_irqrestore(&s->spin_lock, flags);
+	comedi_buf_map_put(bm);
 }
 
 static void __comedi_buf_alloc(struct comedi_device *dev,
@@ -80,6 +85,7 @@ static void __comedi_buf_alloc(struct comedi_device *dev,
 	struct page **pages = NULL;
 	struct comedi_buf_map *bm;
 	struct comedi_buf_page *buf;
+	unsigned long flags;
 	unsigned i;
 
 	if (!IS_ENABLED(CONFIG_HAS_DMA) && s->async_dma_dir != DMA_NONE) {
@@ -92,8 +98,10 @@ static void __comedi_buf_alloc(struct comedi_device *dev,
 	if (!bm)
 		return;
 
-	async->buf_map = bm;
 	kref_init(&bm->refcount);
+	spin_lock_irqsave(&s->spin_lock, flags);
+	async->buf_map = bm;
+	spin_unlock_irqrestore(&s->spin_lock, flags);
 	bm->dma_dir = s->async_dma_dir;
 	if (bm->dma_dir != DMA_NONE)
 		/* Need ref to hardware device to free buffer later. */
@@ -127,7 +135,9 @@ static void __comedi_buf_alloc(struct comedi_device *dev,
 
 		pages[i] = virt_to_page(buf->virt_addr);
 	}
+	spin_lock_irqsave(&s->spin_lock, flags);
 	bm->n_pages = i;
+	spin_unlock_irqrestore(&s->spin_lock, flags);
 
 	/* vmap the prealloc_buf if all the pages were allocated */
 	if (i == n_pages)
@@ -150,6 +160,29 @@ int comedi_buf_map_put(struct comedi_buf_map *bm)
 	return 1;
 }
 
+/* returns s->async->buf_map and increments its kref refcount */
+struct comedi_buf_map *
+comedi_buf_map_from_subdev_get(struct comedi_subdevice *s)
+{
+	struct comedi_async *async = s->async;
+	struct comedi_buf_map *bm = NULL;
+	unsigned long flags;
+
+	if (!async)
+		return NULL;
+
+	spin_lock_irqsave(&s->spin_lock, flags);
+	bm = async->buf_map;
+	/* only want it if buffer pages allocated */
+	if (bm && bm->n_pages)
+		comedi_buf_map_get(bm);
+	else
+		bm = NULL;
+	spin_unlock_irqrestore(&s->spin_lock, flags);
+
+	return bm;
+}
+
 bool comedi_buf_is_mmapped(struct comedi_async *async)
 {
 	struct comedi_buf_map *bm = async->buf_map;
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index ea6dc36d753b..acc80197e35e 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -1926,14 +1926,21 @@ static int comedi_mmap(struct file *file, struct vm_area_struct *vma)
 	struct comedi_device *dev = file->private_data;
 	struct comedi_subdevice *s;
 	struct comedi_async *async;
-	struct comedi_buf_map *bm;
+	struct comedi_buf_map *bm = NULL;
 	unsigned long start = vma->vm_start;
 	unsigned long size;
 	int n_pages;
 	int i;
 	int retval;
 
-	mutex_lock(&dev->mutex);
+	/*
+	 * 'trylock' avoids circular dependency with current->mm->mmap_sem
+	 * and down-reading &dev->attach_lock should normally succeed without
+	 * contention unless the device is in the process of being attached
+	 * or detached.
+	 */
+	if (!down_read_trylock(&dev->attach_lock))
+		return -EAGAIN;
 
 	if (!dev->attached) {
 		dev_dbg(dev->class_dev, "no driver attached\n");
@@ -1973,7 +1980,9 @@ static int comedi_mmap(struct file *file, struct vm_area_struct *vma)
 	}
 
 	n_pages = size >> PAGE_SHIFT;
-	bm = async->buf_map;
+
+	/* get reference to current buf map (if any) */
+	bm = comedi_buf_map_from_subdev_get(s);
 	if (!bm || n_pages > bm->n_pages) {
 		retval = -EINVAL;
 		goto done;
@@ -1997,7 +2006,8 @@ static int comedi_mmap(struct file *file, struct vm_area_struct *vma)
 
 	retval = 0;
 done:
-	mutex_unlock(&dev->mutex);
+	up_read(&dev->attach_lock);
+	comedi_buf_map_put(bm);	/* put reference to buf map - okay if NULL */
 	return retval;
 }
 
diff --git a/drivers/staging/comedi/comedi_internal.h b/drivers/staging/comedi/comedi_internal.h
index 9a746570f161..a492f2d2436e 100644
--- a/drivers/staging/comedi/comedi_internal.h
+++ b/drivers/staging/comedi/comedi_internal.h
@@ -19,6 +19,8 @@ void comedi_buf_reset(struct comedi_async *async);
 bool comedi_buf_is_mmapped(struct comedi_async *async);
 void comedi_buf_map_get(struct comedi_buf_map *bm);
 int comedi_buf_map_put(struct comedi_buf_map *bm);
+struct comedi_buf_map *comedi_buf_map_from_subdev_get(
+		struct comedi_subdevice *s);
 unsigned int comedi_buf_write_n_allocated(struct comedi_async *async);
 void comedi_device_cancel_all(struct comedi_device *dev);
 
diff --git a/drivers/staging/goldfish/goldfish_audio.c b/drivers/staging/goldfish/goldfish_audio.c
index f96dcec740ae..7ac2602242f1 100644
--- a/drivers/staging/goldfish/goldfish_audio.c
+++ b/drivers/staging/goldfish/goldfish_audio.c
@@ -334,6 +334,7 @@ static int goldfish_audio_probe(struct platform_device *pdev)
 	return 0;
 
 err_misc_register_failed:
+	free_irq(data->irq, data);
 err_request_irq_failed:
 	dma_free_coherent(&pdev->dev, COMBINED_BUFFER_SIZE,
 					data->buffer_virt, data->buffer_phys);
diff --git a/drivers/staging/gs_fpgaboot/Makefile b/drivers/staging/gs_fpgaboot/Makefile
index 34cb606e0e3d..d2f0211ba540 100644
--- a/drivers/staging/gs_fpgaboot/Makefile
+++ b/drivers/staging/gs_fpgaboot/Makefile
@@ -1,4 +1,2 @@
 gs_fpga-y	+= gs_fpgaboot.o io.o
 obj-$(CONFIG_GS_FPGABOOT)	+= gs_fpga.o
-
-ccflags-$(CONFIG_GS_FPGA_DEBUG)	:= -DDEBUG
diff --git a/drivers/staging/gs_fpgaboot/gs_fpgaboot.c b/drivers/staging/gs_fpgaboot/gs_fpgaboot.c
index 89bc84d833e6..7506900c9b8d 100644
--- a/drivers/staging/gs_fpgaboot/gs_fpgaboot.c
+++ b/drivers/staging/gs_fpgaboot/gs_fpgaboot.c
@@ -373,7 +373,6 @@ static int __init gs_fpgaboot_init(void)
 	r = -1;
 
 	pr_info("FPGA DOWNLOAD --->\n");
-	pr_info("built at %s UTC\n", __TIMESTAMP__);
 
 	pr_info("FPGA image file name: %s\n", file);
 
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
deleted file mode 100644
index ff8d41ebca36..000000000000
--- a/drivers/staging/rtl8187se/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config R8187SE
-	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
-	depends on PCI && WLAN
-	depends on m
-	select WIRELESS_EXT
-	select WEXT_PRIV
-	select EEPROM_93CX6
-	select CRYPTO
-	---help---
-	  If built as a module, it will be called r8187se.ko.
diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile
deleted file mode 100644
index 91d1aa2830c9..000000000000
--- a/drivers/staging/rtl8187se/Makefile
+++ /dev/null
@@ -1,38 +0,0 @@
-
-#ccflags-y += -DCONFIG_IEEE80211_NOWEP=y
-#ccflags-y += -std=gnu89
-#ccflags-y += -O2
-#CC            = gcc
-
-ccflags-y := -DSW_ANTE
-ccflags-y += -DTX_TRACK
-ccflags-y += -DHIGH_POWER
-ccflags-y += -DSW_DIG
-ccflags-y += -DRATE_ADAPT
-
-#enable it for legacy power save, disable it for leisure power save
-ccflags-y += -DENABLE_LPS
-
-
-#ccflags-y := -mhard-float -DCONFIG_FORCE_HARD_FLOAT=y
-
-r8187se-y :=			\
-		r8180_core.o		\
-		r8180_wx.o		\
-		r8180_rtl8225z2.o	\
-		r8185b_init.o		\
-		r8180_dm.o		\
-		ieee80211/dot11d.o			\
-		ieee80211/ieee80211_softmac.o		\
-		ieee80211/ieee80211_rx.o		\
-		ieee80211/ieee80211_tx.o		\
-		ieee80211/ieee80211_wx.o		\
-		ieee80211/ieee80211_module.o		\
-		ieee80211/ieee80211_softmac_wx.o	\
-		ieee80211/ieee80211_crypt.o		\
-		ieee80211/ieee80211_crypt_tkip.o	\
-		ieee80211/ieee80211_crypt_ccmp.o	\
-		ieee80211/ieee80211_crypt_wep.o
-
-obj-$(CONFIG_R8187SE)	+= r8187se.o
-
diff --git a/drivers/staging/rtl8187se/Module.symvers b/drivers/staging/rtl8187se/Module.symvers
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/drivers/staging/rtl8187se/Module.symvers
+++ /dev/null
diff --git a/drivers/staging/rtl8187se/TODO b/drivers/staging/rtl8187se/TODO
deleted file mode 100644
index 704949a9da0d..000000000000
--- a/drivers/staging/rtl8187se/TODO
+++ /dev/null
@@ -1,13 +0,0 @@
-TODO:
-- prepare private ieee80211 stack for merge with rtl8192su's version:
-  - add hwsec_active flag to struct ieee80211_device
-  - add bHwSec flag to cb_desc structure
-- switch to use shared "librtl" instead of private ieee80211 stack
-- switch to use LIB80211
-- switch to use MAC80211
-- use kernel coding style
-- checkpatch.pl fixes
-- sparse fixes
-- integrate with drivers/net/wireless/rtl818x
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c
deleted file mode 100644
index 4483c2c0307c..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.c
+++ /dev/null
@@ -1,189 +0,0 @@
-#include "dot11d.h"
-
-void Dot11d_Init(struct ieee80211_device *ieee)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
-
-	pDot11dInfo->bEnabled = 0;
-
-	pDot11dInfo->State = DOT11D_STATE_NONE;
-	pDot11dInfo->CountryIeLen = 0;
-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
-	RESET_CIE_WATCHDOG(ieee);
-
-	netdev_info(ieee->dev, "Dot11d_Init()\n");
-}
-
-/* Reset to the state as we are just entering a regulatory domain. */
-void Dot11d_Reset(struct ieee80211_device *ieee)
-{
-	u32 i;
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
-
-	/* Clear old channel map */
-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
-	/* Set new channel map */
-	for (i = 1; i <= 11; i++)
-		(pDot11dInfo->channel_map)[i] = 1;
-
-	for (i = 12; i <= 14; i++)
-		(pDot11dInfo->channel_map)[i] = 2;
-
-	pDot11dInfo->State = DOT11D_STATE_NONE;
-	pDot11dInfo->CountryIeLen = 0;
-	RESET_CIE_WATCHDOG(ieee);
-}
-
-/*
- * Description:
- *	Update country IE from Beacon or Probe Response and configure PHY for
- *	operation in the regulatory domain.
- *
- * TODO:
- *	Configure Tx power.
- *
- * Assumption:
- *	1. IS_DOT11D_ENABLE() is TRUE.
- *	2. Input IE is an valid one.
- */
-void Dot11d_UpdateCountryIe(struct ieee80211_device *dev, u8 *pTaddr,
-			    u16 CoutryIeLen, u8 *pCoutryIe)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-	u8 i, j, NumTriples, MaxChnlNum;
-	u8 index, MaxTxPowerInDbm;
-	PCHNL_TXPOWER_TRIPLE pTriple;
-
-	if ((CoutryIeLen - 3)%3 != 0) {
-		netdev_info(dev->dev, "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");
-		Dot11d_Reset(dev);
-		return;
-	}
-
-	memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
-	memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
-	MaxChnlNum = 0;
-	NumTriples = (CoutryIeLen - 3) / 3; /* skip 3-byte country string. */
-	pTriple = (PCHNL_TXPOWER_TRIPLE)(pCoutryIe + 3);
-	for (i = 0; i < NumTriples; i++) {
-		if (MaxChnlNum >= pTriple->FirstChnl) {
-			/*
-			 * It is not in a monotonically increasing order,
-			 * so stop processing.
-			 */
-			netdev_info(dev->dev,
-				    "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n");
-			Dot11d_Reset(dev);
-			return;
-		}
-		if (MAX_CHANNEL_NUMBER <
-		    (pTriple->FirstChnl + pTriple->NumChnls)) {
-			/*
-			 * It is not a valid set of channel id,
-			 * so stop processing
-			 */
-			netdev_info(dev->dev,
-				    "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........2\n");
-			Dot11d_Reset(dev);
-			return;
-		}
-
-		for (j = 0; j < pTriple->NumChnls; j++) {
-			index = pTriple->FirstChnl + j;
-			pDot11dInfo->channel_map[index] = 1;
-			MaxTxPowerInDbm = pTriple->MaxTxPowerInDbm;
-			pDot11dInfo->MaxTxPwrDbmList[index] = MaxTxPowerInDbm;
-			MaxChnlNum = pTriple->FirstChnl + j;
-		}
-
-		pTriple = (PCHNL_TXPOWER_TRIPLE)((u8 *)pTriple + 3);
-	}
-#if 1
-	netdev_info(dev->dev, "Channel List:");
-	for (i = 1; i <= MAX_CHANNEL_NUMBER; i++)
-		if (pDot11dInfo->channel_map[i] > 0)
-			netdev_info(dev->dev, " %d", i);
-	netdev_info(dev->dev, "\n");
-#endif
-
-	UPDATE_CIE_SRC(dev, pTaddr);
-
-	pDot11dInfo->CountryIeLen = CoutryIeLen;
-	memcpy(pDot11dInfo->CountryIeBuf, pCoutryIe, CoutryIeLen);
-	pDot11dInfo->State = DOT11D_STATE_LEARNED;
-}
-
-u8 DOT11D_GetMaxTxPwrInDbm(struct ieee80211_device *dev, u8 Channel)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-	u8 MaxTxPwrInDbm = 255;
-
-	if (MAX_CHANNEL_NUMBER < Channel) {
-		netdev_info(dev->dev, "DOT11D_GetMaxTxPwrInDbm(): Invalid Channel\n");
-		return MaxTxPwrInDbm;
-	}
-	if (pDot11dInfo->channel_map[Channel])
-		MaxTxPwrInDbm = pDot11dInfo->MaxTxPwrDbmList[Channel];
-
-	return MaxTxPwrInDbm;
-}
-
-
-void DOT11D_ScanComplete(struct ieee80211_device *dev)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-
-	switch (pDot11dInfo->State) {
-	case DOT11D_STATE_LEARNED:
-		pDot11dInfo->State = DOT11D_STATE_DONE;
-		break;
-
-	case DOT11D_STATE_DONE:
-		if (GET_CIE_WATCHDOG(dev) == 0) {
-			/* Reset country IE if previous one is gone. */
-			Dot11d_Reset(dev);
-		}
-		break;
-	case DOT11D_STATE_NONE:
-		break;
-	}
-}
-
-int IsLegalChannel(struct ieee80211_device *dev, u8 channel)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-
-	if (MAX_CHANNEL_NUMBER < channel) {
-		netdev_info(dev->dev, "IsLegalChannel(): Invalid Channel\n");
-		return 0;
-	}
-	if (pDot11dInfo->channel_map[channel] > 0)
-		return 1;
-	return 0;
-}
-
-int ToLegalChannel(struct ieee80211_device *dev, u8 channel)
-{
-	PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
-	u8 default_chn = 0;
-	u32 i = 0;
-
-	for (i = 1; i <= MAX_CHANNEL_NUMBER; i++) {
-		if (pDot11dInfo->channel_map[i] > 0) {
-			default_chn = i;
-			break;
-		}
-	}
-
-	if (MAX_CHANNEL_NUMBER < channel) {
-		netdev_info(dev->dev, "IsLegalChannel(): Invalid Channel\n");
-		return default_chn;
-	}
-
-	if (pDot11dInfo->channel_map[channel] > 0)
-		return channel;
-
-	return default_chn;
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.h b/drivers/staging/rtl8187se/ieee80211/dot11d.h
deleted file mode 100644
index f996691307bf..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/dot11d.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef __INC_DOT11D_H
-#define __INC_DOT11D_H
-
-#include "ieee80211.h"
-
-/* #define ENABLE_DOT11D */
-
-/* #define DOT11D_MAX_CHNL_NUM 83 */
-
-typedef struct _CHNL_TXPOWER_TRIPLE {
-	u8 FirstChnl;
-	u8  NumChnls;
-	u8  MaxTxPowerInDbm;
-} CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE;
-
-typedef enum _DOT11D_STATE {
-	DOT11D_STATE_NONE = 0,
-	DOT11D_STATE_LEARNED,
-	DOT11D_STATE_DONE,
-} DOT11D_STATE;
-
-typedef struct _RT_DOT11D_INFO {
-	/* DECLARE_RT_OBJECT(RT_DOT12D_INFO); */
-
-	bool bEnabled; /* dot11MultiDomainCapabilityEnabled */
-
-	u16 CountryIeLen; /* > 0 if CountryIeBuf[] contains valid country information element. */
-	u8  CountryIeBuf[MAX_IE_LEN];
-	u8  CountryIeSrcAddr[6]; /* Source AP of the country IE. */
-	u8  CountryIeWatchdog;
-
-	u8  channel_map[MAX_CHANNEL_NUMBER+1];  /* !!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) */
-	/* u8  ChnlListLen; // #Bytes valid in ChnlList[]. */
-	/* u8  ChnlList[DOT11D_MAX_CHNL_NUM]; */
-	u8  MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1];
-
-	DOT11D_STATE State;
-} RT_DOT11D_INFO, *PRT_DOT11D_INFO;
-
-#define eqMacAddr(a, b) (((a)[0] == (b)[0] && (a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && (a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1:0)
-#define cpMacAddr(des, src) ((des)[0] = (src)[0], (des)[1] = (src)[1], (des)[2] = (src)[2], (des)[3] = (src)[3], (des)[4] = (src)[4], (des)[5] = (src)[5])
-#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo))
-
-#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled
-#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0)
-
-#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa)
-
-#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \
-	(((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \
-	FALSE : \
-	(!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length)))
-
-#define CIE_WATCHDOG_TH 1
-#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog
-#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0
-#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev)
-
-#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE)
-
-void Dot11d_Init(struct ieee80211_device *dev);
-void Dot11d_Reset(struct ieee80211_device *dev);
-void Dot11d_UpdateCountryIe(struct ieee80211_device *dev, u8 *pTaddr,
-			    u16 CoutryIeLen, u8 *pCoutryIe);
-u8 DOT11D_GetMaxTxPwrInDbm(struct ieee80211_device *dev, u8 Channel);
-void DOT11D_ScanComplete(struct ieee80211_device *dev);
-int IsLegalChannel(struct ieee80211_device *dev, u8 channel);
-int ToLegalChannel(struct ieee80211_device *dev, u8 channel);
-
-#endif /*  #ifndef __INC_DOT11D_H */
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
deleted file mode 100644
index d1763b7b8f27..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ /dev/null
@@ -1,1496 +0,0 @@
-/*
- * Merged with mainline ieee80211.h in Aug 2004.  Original ieee802_11
- * remains copyright by the original authors
- *
- * Portions of the merged code are based on Host AP (software wireless
- * LAN access point) driver for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- * Copyright (c) 2004, Intel Corporation
- *
- * Modified for Realtek's wi-fi cards by Andrea Merello
- * <andrea.merello@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-#ifndef IEEE80211_H
-#define IEEE80211_H
-#include <linux/if_ether.h> /* ETH_ALEN */
-#include <linux/kernel.h>   /* ARRAY_SIZE */
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-#include <linux/sched.h>
-#include <linux/semaphore.h>
-#include <linux/wireless.h>
-#include <linux/ieee80211.h>
-#include <linux/interrupt.h>
-
-#define KEY_TYPE_NA		0x0
-#define KEY_TYPE_WEP40 		0x1
-#define KEY_TYPE_TKIP		0x2
-#define KEY_TYPE_CCMP		0x4
-#define KEY_TYPE_WEP104		0x5
-
-#define aSifsTime					10
-
-#define MGMT_QUEUE_NUM 5
-
-
-#define IEEE_CMD_SET_WPA_PARAM			1
-#define	IEEE_CMD_SET_WPA_IE			2
-#define IEEE_CMD_SET_ENCRYPTION			3
-#define IEEE_CMD_MLME				4
-
-#define IEEE_PARAM_WPA_ENABLED			1
-#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
-#define IEEE_PARAM_DROP_UNENCRYPTED		3
-#define IEEE_PARAM_PRIVACY_INVOKED		4
-#define IEEE_PARAM_AUTH_ALGS			5
-#define IEEE_PARAM_IEEE_802_1X			6
-//It should consistent with the driver_XXX.c
-//   David, 2006.9.26
-#define IEEE_PARAM_WPAX_SELECT			7
-//Added for notify the encryption type selection
-//   David, 2006.9.26
-#define IEEE_PROTO_WPA				1
-#define IEEE_PROTO_RSN				2
-//Added for notify the encryption type selection
-//   David, 2006.9.26
-#define IEEE_WPAX_USEGROUP			0
-#define IEEE_WPAX_WEP40				1
-#define IEEE_WPAX_TKIP				2
-#define IEEE_WPAX_WRAP   			3
-#define IEEE_WPAX_CCMP				4
-#define IEEE_WPAX_WEP104			5
-
-#define IEEE_KEY_MGMT_IEEE8021X			1
-#define IEEE_KEY_MGMT_PSK			2
-
-
-
-#define IEEE_MLME_STA_DEAUTH			1
-#define IEEE_MLME_STA_DISASSOC			2
-
-
-#define IEEE_CRYPT_ERR_UNKNOWN_ALG		2
-#define IEEE_CRYPT_ERR_UNKNOWN_ADDR		3
-#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED		4
-#define IEEE_CRYPT_ERR_KEY_SET_FAILED		5
-#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED		6
-#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
-
-
-#define	IEEE_CRYPT_ALG_NAME_LEN			16
-
-extern int ieee80211_crypto_tkip_init(void);
-extern void ieee80211_crypto_tkip_exit(void);
-
-//by amy for ps
-typedef struct ieee_param {
-	u32 cmd;
-	u8 sta_addr[ETH_ALEN];
-        union {
-		struct {
-			u8 name;
-			u32 value;
-		} wpa_param;
-		struct {
-			u32 len;
-			u8 reserved[32];
-			u8 data[0];
-		} wpa_ie;
-	        struct{
-			int command;
-    			int reason_code;
-		} mlme;
-		struct {
-			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
-			u8 set_tx;
-			u32 err;
-			u8 idx;
-			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
-			u16 key_len;
-			u8 key[0];
-		} crypt;
-
-	} u;
-}ieee_param;
-
-
-#define MSECS(t) msecs_to_jiffies(t)
-#define msleep_interruptible_rtl  msleep_interruptible
-
-#define IEEE80211_DATA_LEN		2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
-   6.2.1.1.2.
-
-   The figure in section 7.1.2 suggests a body size of up to 2312
-   bytes is allowed, which is a bit confusing, I suspect this
-   represents the 2304 bytes of real data, plus a possible 8 bytes of
-   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN    4
-#define IEEE80211_HLEN			IEEE80211_4ADDR_LEN
-#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-#define MIN_FRAG_THRESHOLD     256U
-#define	MAX_FRAG_THRESHOLD     2346U
-
-/* Frame control field constants */
-#define IEEE80211_FCTL_DSTODS		0x0300 //added by david
-#define IEEE80211_FCTL_WEP		0x4000
-
-/* debug macros */
-
-#ifdef CONFIG_IEEE80211_DEBUG
-extern u32 ieee80211_debug_level;
-#define IEEE80211_DEBUG(level, fmt, args...) \
-do { if (ieee80211_debug_level & (level)) \
-  printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
-         in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0)
-#else
-#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
-#endif	/* CONFIG_IEEE80211_DEBUG */
-
-/*
- * To use the debug system;
- *
- * If you are defining a new debug classification, simply add it to the #define
- * list here in the form of:
- *
- * #define IEEE80211_DL_xxxx VALUE
- *
- * shifting value to the left one bit from the previous entry.  xxxx should be
- * the name of the classification (for example, WEP)
- *
- * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
- * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
- * to send output to that classification.
- *
- * To add your debug level to the list of levels seen when you perform
- *
- * % cat /proc/net/ipw/debug_level
- *
- * you simply need to add your entry to the ipw_debug_levels array.
- *
- * If you do not see debug_level in /proc/net/ipw then you do not have
- * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
- *
- */
-
-#define IEEE80211_DL_INFO          (1<<0)
-#define IEEE80211_DL_WX            (1<<1)
-#define IEEE80211_DL_SCAN          (1<<2)
-#define IEEE80211_DL_STATE         (1<<3)
-#define IEEE80211_DL_MGMT          (1<<4)
-#define IEEE80211_DL_FRAG          (1<<5)
-#define IEEE80211_DL_EAP           (1<<6)
-#define IEEE80211_DL_DROP          (1<<7)
-
-#define IEEE80211_DL_TX            (1<<8)
-#define IEEE80211_DL_RX            (1<<9)
-
-#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
-#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
-#define IEEE80211_DEBUG_INFO(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
-
-#define IEEE80211_DEBUG_WX(f, a...)     IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
-#define IEEE80211_DEBUG_SCAN(f, a...)   IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
-//#define IEEE_DEBUG_SCAN  IEEE80211_WARNING
-#define IEEE80211_DEBUG_STATE(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
-#define IEEE80211_DEBUG_MGMT(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
-#define IEEE80211_DEBUG_FRAG(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
-#define IEEE80211_DEBUG_EAP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
-#define IEEE80211_DEBUG_DROP(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
-#define IEEE80211_DEBUG_TX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
-#define IEEE80211_DEBUG_RX(f, a...)  IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
-#include <linux/netdevice.h>
-#include <linux/if_arp.h> /* ARPHRD_ETHER */
-
-#ifndef WIRELESS_SPY
-#define WIRELESS_SPY		// enable iwspy support
-#endif
-#include <net/iw_handler.h>	// new driver API
-
-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
-
-#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
-
-#ifndef ETH_P_80211_RAW
-#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
-#endif
-
-/* IEEE 802.11 defines */
-
-#define P80211_OUI_LEN 3
-
-struct ieee80211_snap_hdr {
-
-        u8    dsap;   /* always 0xAA */
-        u8    ssap;   /* always 0xAA */
-        u8    ctrl;   /* always 0x03 */
-        u8    oui[P80211_OUI_LEN];    /* organizational universal id */
-
-} __attribute__ ((packed));
-
-#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
-
-#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
-#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
-
-#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq)  ((seq) & IEEE80211_SCTL_SEQ)
-
-#define WLAN_CAPABILITY_BSS (1<<0)
-#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
-
-#define IEEE80211_STATMASK_SIGNAL (1<<0)
-#define IEEE80211_STATMASK_RSSI (1<<1)
-#define IEEE80211_STATMASK_NOISE (1<<2)
-#define IEEE80211_STATMASK_RATE (1<<3)
-#define IEEE80211_STATMASK_WEMASK 0x7
-
-
-#define IEEE80211_CCK_MODULATION    (1<<0)
-#define IEEE80211_OFDM_MODULATION   (1<<1)
-
-#define IEEE80211_24GHZ_BAND     (1<<0)
-#define IEEE80211_52GHZ_BAND     (1<<1)
-
-#define IEEE80211_CCK_RATE_LEN  		4
-#define IEEE80211_CCK_RATE_1MB		        0x02
-#define IEEE80211_CCK_RATE_2MB		        0x04
-#define IEEE80211_CCK_RATE_5MB		        0x0B
-#define IEEE80211_CCK_RATE_11MB		        0x16
-#define IEEE80211_OFDM_RATE_LEN 		8
-#define IEEE80211_OFDM_RATE_6MB		        0x0C
-#define IEEE80211_OFDM_RATE_9MB		        0x12
-#define IEEE80211_OFDM_RATE_12MB		0x18
-#define IEEE80211_OFDM_RATE_18MB		0x24
-#define IEEE80211_OFDM_RATE_24MB		0x30
-#define IEEE80211_OFDM_RATE_36MB		0x48
-#define IEEE80211_OFDM_RATE_48MB		0x60
-#define IEEE80211_OFDM_RATE_54MB		0x6C
-#define IEEE80211_BASIC_RATE_MASK		0x80
-
-#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
-#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
-#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
-#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
-#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
-#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
-#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
-#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
-#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
-#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
-#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
-#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
-
-#define IEEE80211_CCK_RATES_MASK	        0x0000000F
-#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
-	IEEE80211_CCK_RATE_2MB_MASK)
-#define IEEE80211_CCK_DEFAULT_RATES_MASK	(IEEE80211_CCK_BASIC_RATES_MASK | \
-        IEEE80211_CCK_RATE_5MB_MASK | \
-        IEEE80211_CCK_RATE_11MB_MASK)
-
-#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
-#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
-	IEEE80211_OFDM_RATE_12MB_MASK | \
-	IEEE80211_OFDM_RATE_24MB_MASK)
-#define IEEE80211_OFDM_DEFAULT_RATES_MASK	(IEEE80211_OFDM_BASIC_RATES_MASK | \
-	IEEE80211_OFDM_RATE_9MB_MASK  | \
-	IEEE80211_OFDM_RATE_18MB_MASK | \
-	IEEE80211_OFDM_RATE_36MB_MASK | \
-	IEEE80211_OFDM_RATE_48MB_MASK | \
-	IEEE80211_OFDM_RATE_54MB_MASK)
-#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
-                                IEEE80211_CCK_DEFAULT_RATES_MASK)
-
-#define IEEE80211_NUM_OFDM_RATES	    8
-#define IEEE80211_NUM_CCK_RATES	            4
-#define IEEE80211_OFDM_SHIFT_MASK_A         4
-
-/* this is stolen and modified from the madwifi driver*/
-#define IEEE80211_FC0_TYPE_MASK		0x0c
-#define IEEE80211_FC0_TYPE_DATA		0x08
-#define IEEE80211_FC0_SUBTYPE_MASK	0xB0
-#define IEEE80211_FC0_SUBTYPE_QOS	0x80
-
-#define IEEE80211_QOS_HAS_SEQ(fc) \
-	(((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
-	 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
-
-/* this is stolen from ipw2200 driver */
-#define IEEE_IBSS_MAC_HASH_SIZE 31
-struct ieee_ibss_seq {
-	u8 mac[ETH_ALEN];
-	u16 seq_num[17];
-	u16 frag_num[17];
-	unsigned long packet_time[17];
-	struct list_head list;
-};
-
-/* NOTE: This data is for statistical purposes; not all hardware provides this
- *       information for frames received.  Not setting these will not cause
- *       any adverse affects. */
-struct ieee80211_rx_stats {
-	u32 mac_time[2];
-	u8 signalstrength;
-	s8 rssi;
-	u8 signal;
-	u8 noise;
-	u16 rate; /* in 100 kbps */
-	u8 received_channel;
-	u8 control;
-	u8 mask;
-	u8 freq;
-	u16 len;
-	u8 nic_type;
-};
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
-#define IEEE80211_FRAG_CACHE_LEN 4
-
-struct ieee80211_frag_entry {
-	unsigned long first_frag_time;
-	unsigned int seq;
-	unsigned int last_frag;
-	struct sk_buff *skb;
-	u8 src_addr[ETH_ALEN];
-	u8 dst_addr[ETH_ALEN];
-};
-
-struct ieee80211_stats {
-	unsigned int tx_unicast_frames;
-	unsigned int tx_multicast_frames;
-	unsigned int tx_fragments;
-	unsigned int tx_unicast_octets;
-	unsigned int tx_multicast_octets;
-	unsigned int tx_deferred_transmissions;
-	unsigned int tx_single_retry_frames;
-	unsigned int tx_multiple_retry_frames;
-	unsigned int tx_retry_limit_exceeded;
-	unsigned int tx_discards;
-	unsigned int rx_unicast_frames;
-	unsigned int rx_multicast_frames;
-	unsigned int rx_fragments;
-	unsigned int rx_unicast_octets;
-	unsigned int rx_multicast_octets;
-	unsigned int rx_fcs_errors;
-	unsigned int rx_discards_no_buffer;
-	unsigned int tx_discards_wrong_sa;
-	unsigned int rx_discards_undecryptable;
-	unsigned int rx_message_in_msg_fragments;
-	unsigned int rx_message_in_bad_msg_fragments;
-};
-
-struct ieee80211_device;
-
-#include "ieee80211_crypt.h"
-
-#define SEC_KEY_1         (1<<0)
-#define SEC_KEY_2         (1<<1)
-#define SEC_KEY_3         (1<<2)
-#define SEC_KEY_4         (1<<3)
-#define SEC_ACTIVE_KEY    (1<<4)
-#define SEC_AUTH_MODE     (1<<5)
-#define SEC_UNICAST_GROUP (1<<6)
-#define SEC_LEVEL         (1<<7)
-#define SEC_ENABLED       (1<<8)
-
-#define SEC_LEVEL_0      0 /* None */
-#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
-#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
-#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
-
-#define WEP_KEYS 4
-#define WEP_KEY_LEN 13
-
-#define WEP_KEY_LEN_MODIF 32
-
-struct ieee80211_security {
-	u16 active_key:2,
-            enabled:1,
-	    auth_mode:2,
-            auth_algo:4,
-            unicast_uses_group:1;
-	u8 key_sizes[WEP_KEYS];
-	u8 keys[WEP_KEYS][WEP_KEY_LEN_MODIF];
-	u8 level;
-	u16 flags;
-} __attribute__ ((packed));
-
-
-/*
-
- 802.11 data frame from AP
-
-      ,-------------------------------------------------------------------.
-Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
-      |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
-      |      | tion | (BSSID) |         |         | ence |  data   |      |
-      `-------------------------------------------------------------------'
-
-Total: 28-2340 bytes
-
-*/
-
-/* Management Frame Information Element Types */
-enum {
-	MFIE_TYPE_SSID = 0,
-	MFIE_TYPE_RATES = 1,
-	MFIE_TYPE_FH_SET = 2,
-	MFIE_TYPE_DS_SET = 3,
-	MFIE_TYPE_CF_SET = 4,
-	MFIE_TYPE_TIM = 5,
-	MFIE_TYPE_IBSS_SET = 6,
-	MFIE_TYPE_COUNTRY = 7,
-	MFIE_TYPE_CHALLENGE = 16,
-	MFIE_TYPE_ERP = 42,
-	MFIE_TYPE_RSN = 48,
-	MFIE_TYPE_RATES_EX = 50,
-	MFIE_TYPE_GENERIC = 221,
-};
-
-struct ieee80211_header_data {
-	__le16 frame_ctl;
-	u16 duration_id;
-	u8 addr1[6];
-	u8 addr2[6];
-	u8 addr3[6];
-	u16 seq_ctrl;
-};
-
-struct ieee80211_hdr_4addr {
-	__le16 frame_ctl;
-	u16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	u16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addrqos {
-	u16 frame_ctl;
-	u16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	u16 seq_ctl;
-	u16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_4addrqos {
-	u16 frame_ctl;
-	u16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	u16 seq_ctl;
-	u8 addr4[ETH_ALEN];
-	u16 qos_ctl;
-} __attribute__ ((packed));
-
-struct ieee80211_info_element_hdr {
-	u8 id;
-	u8 len;
-} __attribute__ ((packed));
-
-struct ieee80211_info_element {
-	u8 id;
-	u8 len;
-	u8 data[0];
-} __attribute__ ((packed));
-
-struct ieee80211_authentication {
-	struct ieee80211_header_data header;
-	u16 algorithm;
-	u16 transaction;
-	u16 status;
-	//struct ieee80211_info_element_hdr info_element;
-} __attribute__ ((packed));
-
-struct ieee80211_disassoc_frame {
-	struct ieee80211_hdr_3addr header;
-	u16    reasoncode;
-} __attribute__ ((packed));
-
-struct ieee80211_probe_request {
-	struct ieee80211_header_data header;
-	/* struct ieee80211_info_element info_element; */
-} __attribute__ ((packed));
-
-struct ieee80211_probe_response {
-	struct ieee80211_header_data header;
-	u32 time_stamp[2];
-	u16 beacon_interval;
-	u16 capability;
-	struct ieee80211_info_element info_element;
-} __attribute__ ((packed));
-
-struct ieee80211_assoc_request_frame {
-	struct ieee80211_hdr_3addr header;
-	u16 capability;
-	u16 listen_interval;
-	//u8 current_ap[ETH_ALEN];
-	struct ieee80211_info_element_hdr info_element;
-} __attribute__ ((packed));
-
-struct ieee80211_assoc_response_frame {
-	struct ieee80211_hdr_3addr header;
-	u16 capability;
-	u16 status;
-	u16 aid;
-	struct ieee80211_info_element info_element; /* supported rates */
-} __attribute__ ((packed));
-
-struct ieee80211_txb {
-	u8 nr_frags;
-	u8 encrypted;
-	u16 reserved;
-	u16 frag_size;
-	u16 payload_size;
-	struct sk_buff *fragments[0];
-};
-
-/* SWEEP TABLE ENTRIES NUMBER */
-#define MAX_SWEEP_TAB_ENTRIES			42
-#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET	7
-
-/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
- * only use 8, and then use extended rates for the remaining supported
- * rates.  Other APs, however, stick all of their supported rates on the
- * main rates information element... */
-#define MAX_RATES_LENGTH			((u8)12)
-#define MAX_RATES_EX_LENGTH			((u8)16)
-
-#define MAX_NETWORK_COUNT			128
-
-#define MAX_CHANNEL_NUMBER			165
-
-#define IEEE80211_SOFTMAC_SCAN_TIME		100 /* (HZ / 2) */
-#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME	(HZ * 2)
-
-#define CRC_LENGTH	4U
-
-#define MAX_WPA_IE_LEN	64
-
-#define NETWORK_EMPTY_ESSID	(1 << 0)
-#define NETWORK_HAS_OFDM	(1 << 1)
-#define NETWORK_HAS_CCK		(1 << 2)
-
-struct ieee80211_wmm_ac_param {
-	u8 ac_aci_acm_aifsn;
-	u8 ac_ecwmin_ecwmax;
-	u16 ac_txop_limit;
-};
-
-struct ieee80211_wmm_ts_info {
-	u8 ac_dir_tid;
-	u8 ac_up_psb;
-	u8 reserved;
-} __attribute__ ((packed));
-
-struct ieee80211_wmm_tspec_elem {
-	struct ieee80211_wmm_ts_info ts_info;
-	u16 norm_msdu_size;
-	u16 max_msdu_size;
-	u32 min_serv_inter;
-	u32 max_serv_inter;
-	u32 inact_inter;
-	u32 suspen_inter;
-	u32 serv_start_time;
-	u32 min_data_rate;
-	u32 mean_data_rate;
-	u32 peak_data_rate;
-	u32 max_burst_size;
-	u32 delay_bound;
-	u32 min_phy_rate;
-	u16 surp_band_allow;
-	u16 medium_time;
-}__attribute__((packed));
-
-enum eap_type {
-	EAP_PACKET = 0,
-	EAPOL_START,
-	EAPOL_LOGOFF,
-	EAPOL_KEY,
-	EAPOL_ENCAP_ASF_ALERT
-};
-
-static const char *eap_types[] = {
-	[EAP_PACKET]		= "EAP-Packet",
-	[EAPOL_START]		= "EAPOL-Start",
-	[EAPOL_LOGOFF]		= "EAPOL-Logoff",
-	[EAPOL_KEY]		= "EAPOL-Key",
-	[EAPOL_ENCAP_ASF_ALERT]	= "EAPOL-Encap-ASF-Alert"
-};
-
-static inline const char *eap_get_type(int type)
-{
-	return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
-}
-
-struct eapol {
-	u8 snap[6];
-	u16 ethertype;
-	u8 version;
-	u8 type;
-	u16 length;
-} __attribute__ ((packed));
-
-struct ieee80211_softmac_stats {
-	unsigned int rx_ass_ok;
-	unsigned int rx_ass_err;
-	unsigned int rx_probe_rq;
-	unsigned int tx_probe_rs;
-	unsigned int tx_beacons;
-	unsigned int rx_auth_rq;
-	unsigned int rx_auth_rs_ok;
-	unsigned int rx_auth_rs_err;
-	unsigned int tx_auth_rq;
-	unsigned int no_auth_rs;
-	unsigned int no_ass_rs;
-	unsigned int tx_ass_rq;
-	unsigned int rx_ass_rq;
-	unsigned int tx_probe_rq;
-	unsigned int reassoc;
-	unsigned int swtxstop;
-	unsigned int swtxawake;
-};
-
-#define BEACON_PROBE_SSID_ID_POSITION 12
-
-/*
- * These are the data types that can make up management packets
- *
-	u16 auth_algorithm;
-	u16 auth_sequence;
-	u16 beacon_interval;
-	u16 capability;
-	u8 current_ap[ETH_ALEN];
-	u16 listen_interval;
-	struct {
-		u16 association_id:14, reserved:2;
-	} __attribute__ ((packed));
-	u32 time_stamp[2];
-	u16 reason;
-	u16 status;
-*/
-
-#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
-#define IEEE80211_DEFAULT_BASIC_RATE 10
-
-enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
-#define MAX_SP_Len  (WMM_all_frame << 4)
-#define IEEE80211_QOS_TID 0x0f
-#define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
-
-#define MAX_IE_LEN						0xFF //+YJ,080625
-
-struct rtl8187se_channel_list {
-	u8	channel[MAX_CHANNEL_NUMBER + 1];
-	u8	len;
-};
-
-//by amy for ps
-#define IEEE80211_WATCH_DOG_TIME    2000
-//by amy for ps
-//by amy for antenna
-#define ANTENNA_DIVERSITY_TIMER_PERIOD		1000 // 1000 m
-//by amy for antenna
-
-#define IEEE80211_DTIM_MBCAST 4
-#define IEEE80211_DTIM_UCAST 2
-#define IEEE80211_DTIM_VALID 1
-#define IEEE80211_DTIM_INVALID 0
-
-#define IEEE80211_PS_DISABLED 0
-#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
-#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
-#define IEEE80211_PS_ENABLE   IEEE80211_DTIM_VALID
-//added by David for QoS 2006/6/30
-//#define WMM_Hang_8187
-#ifdef WMM_Hang_8187
-#undef WMM_Hang_8187
-#endif
-
-#define WME_AC_BE   0x00
-#define WME_AC_BK   0x01
-#define WME_AC_VI   0x02
-#define WME_AC_VO   0x03
-#define WME_ACI_MASK 0x03
-#define WME_AIFSN_MASK 0x03
-#define WME_AC_PRAM_LEN 16
-
-//UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
-//#define UP2AC(up)	((up<3) ? ((up==0)?1:0) : (up>>1))
-#define UP2AC(up) (		   \
-	((up) < 1) ? WME_AC_BE : \
-	((up) < 3) ? WME_AC_BK : \
-	((up) < 4) ? WME_AC_BE : \
-	((up) < 6) ? WME_AC_VI : \
-	WME_AC_VO)
-//AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
-#define AC2UP(_ac)	(       \
-	((_ac) == WME_AC_VO) ? 6 : \
-	((_ac) == WME_AC_VI) ? 5 : \
-	((_ac) == WME_AC_BK) ? 1 : \
-	0)
-
-#define	ETHER_ADDR_LEN		6	/* length of an Ethernet address */
-struct	ether_header {
-	u8 ether_dhost[ETHER_ADDR_LEN];
-	u8 ether_shost[ETHER_ADDR_LEN];
-	u16 ether_type;
-} __attribute__((packed));
-
-#ifndef ETHERTYPE_PAE
-#define	ETHERTYPE_PAE	0x888e		/* EAPOL PAE/802.1x */
-#endif
-#ifndef ETHERTYPE_IP
-#define	ETHERTYPE_IP	0x0800		/* IP protocol */
-#endif
-
-struct ieee80211_network {
-	/* These entries are used to identify a unique network */
-	u8 bssid[ETH_ALEN];
-	u8 channel;
-	/* Ensure null-terminated for any debug msgs */
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-
-	/* These are network statistics */
-	struct ieee80211_rx_stats stats;
-	u16 capability;
-	u8 rates[MAX_RATES_LENGTH];
-	u8 rates_len;
-	u8 rates_ex[MAX_RATES_EX_LENGTH];
-	u8 rates_ex_len;
-	unsigned long last_scanned;
-	u8 mode;
-	u8 flags;
-	u32 last_associate;
-	u32 time_stamp[2];
-	u16 beacon_interval;
-	u16 listen_interval;
-	u16 atim_window;
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-	u8 rsn_ie[MAX_WPA_IE_LEN];
-	size_t rsn_ie_len;
-	u8 dtim_period;
-	u8 dtim_data;
-	u32 last_dtim_sta_time[2];
-	struct list_head list;
-	//appeded for QoS
-	u8 wmm_info;
-	struct ieee80211_wmm_ac_param wmm_param[4];
-	u8 QoS_Enable;
-	u8 SignalStrength;
-//by amy 080312
-	u8 HighestOperaRate;
-//by amy 080312
-	u8 Turbo_Enable;//enable turbo mode, added by thomas
-	u16 CountryIeLen;
-	u8 CountryIeBuf[MAX_IE_LEN];
-};
-
-enum ieee80211_state {
-
-	/* the card is not linked at all */
-	IEEE80211_NOLINK = 0,
-
-	/* IEEE80211_ASSOCIATING* are for BSS client mode
-	 * the driver shall not perform RX filtering unless
-	 * the state is LINKED.
-	 * The driver shall just check for the state LINKED and
-	 * defaults to NOLINK for ALL the other states (including
-	 * LINKED_SCANNING)
-	 */
-
-	/* the association procedure will start (wq scheduling)*/
-	IEEE80211_ASSOCIATING,
-	IEEE80211_ASSOCIATING_RETRY,
-
-	/* the association procedure is sending AUTH request*/
-	IEEE80211_ASSOCIATING_AUTHENTICATING,
-
-	/* the association procedure has successfully authenticated
-	 * and is sending association request
-	 */
-	IEEE80211_ASSOCIATING_AUTHENTICATED,
-
-	/* the link is ok. the card associated to a BSS or linked
-	 * to a ibss cell or acting as an AP and creating the bss
-	 */
-	IEEE80211_LINKED,
-
-	/* same as LINKED, but the driver shall apply RX filter
-	 * rules as we are in NO_LINK mode. As the card is still
-	 * logically linked, but it is doing a syncro site survey
-	 * then it will be back to LINKED state.
-	 */
-	IEEE80211_LINKED_SCANNING,
-
-};
-
-#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
-#define DEFAULT_FTS 2346
-
-#define CFG_IEEE80211_RESERVE_FCS (1<<0)
-#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
-
-typedef struct tx_pending_t{
-	int frag;
-	struct ieee80211_txb *txb;
-}tx_pending_t;
-
-enum {
-	COUNTRY_CODE_FCC = 0,
-	COUNTRY_CODE_IC = 1,
-	COUNTRY_CODE_ETSI = 2,
-	COUNTRY_CODE_SPAIN = 3,
-	COUNTRY_CODE_FRANCE = 4,
-	COUNTRY_CODE_MKK = 5,
-	COUNTRY_CODE_MKK1 = 6,
-	COUNTRY_CODE_ISRAEL = 7,
-	COUNTRY_CODE_TELEC = 8,
-	COUNTRY_CODE_GLOBAL_DOMAIN = 9,
-	COUNTRY_CODE_WORLD_WIDE_13_INDEX = 10
-};
-
-struct ieee80211_device {
-	struct net_device *dev;
-
-	/* Bookkeeping structures */
-	struct net_device_stats stats;
-	struct ieee80211_stats ieee_stats;
-	struct ieee80211_softmac_stats softmac_stats;
-
-	/* Probe / Beacon management */
-	struct list_head network_free_list;
-	struct list_head network_list;
-	struct ieee80211_network *networks;
-	int scans;
-	int scan_age;
-
-	int iw_mode; /* operating mode (IW_MODE_*) */
-
-	spinlock_t lock;
-	spinlock_t wpax_suitlist_lock;
-
-	int tx_headroom; /* Set to size of any additional room needed at front
-			  * of allocated Tx SKBs */
-	u32 config;
-
-	/* WEP and other encryption related settings at the device level */
-	int open_wep; /* Set to 1 to allow unencrypted frames */
-
-	int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
-				 * WEP key changes */
-
-	/* If the host performs {en,de}cryption, then set to 1 */
-	int host_encrypt;
-	int host_decrypt;
-	int ieee802_1x; /* is IEEE 802.1X used */
-
-	/* WPA data */
-	int wpa_enabled;
-	int drop_unencrypted;
-	int tkip_countermeasures;
-	int privacy_invoked;
-	size_t wpa_ie_len;
-	u8 *wpa_ie;
-
-	u8 ap_mac_addr[6];
-	u16 pairwise_key_type;
-	u16 broadcast_key_type;
-
-	struct list_head crypt_deinit_list;
-	struct ieee80211_crypt_data *crypt[WEP_KEYS];
-	int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
-	struct timer_list crypt_deinit_timer;
-
-	int bcrx_sta_key; /* use individual keys to override default keys even
-			   * with RX of broad/multicast frames */
-
-	/* Fragmentation structures */
-	/* each stream contains an entry */
-	struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
-	unsigned int frag_next_idx[17];
-	u16 fts; /* Fragmentation Threshold */
-
-	/* This stores infos for the current network.
-	 * Either the network we are associated in INFRASTRUCTURE
-	 * or the network that we are creating in MASTER mode.
-	 * ad-hoc is a mixture ;-).
-	 * Note that in infrastructure mode, even when not associated,
-	 * fields bssid and essid may be valid (if wpa_set and essid_set
-	 * are true) as thy carry the value set by the user via iwconfig
-	 */
-	struct ieee80211_network current_network;
-
-
-	enum ieee80211_state state;
-
-	int short_slot;
-	int mode;       /* A, B, G */
-	int modulation; /* CCK, OFDM */
-	int freq_band;  /* 2.4Ghz, 5.2Ghz, Mixed */
-	int abg_true;   /* ABG flag              */
-
-	/* used for forcing the ibss workqueue to terminate
-	 * without wait for the syncro scan to terminate
-	 */
-	short sync_scan_hurryup;
-
-	void * pDot11dInfo;
-	bool bGlobalDomain;
-
-	// For Liteon Ch12~13 passive scan
-	u8	MinPassiveChnlNum;
-	u8	IbssStartChnl;
-
-	int rate;       /* current rate */
-	int basic_rate;
-	//FIXME: please callback, see if redundant with softmac_features
-	short active_scan;
-
-	/* this contains flags for selectively enable softmac support */
-	u16 softmac_features;
-
-	/* if the sequence control field is not filled by HW */
-	u16 seq_ctrl[5];
-
-	/* association procedure transaction sequence number */
-	u16 associate_seq;
-
-	/* AID for RTXed association responses */
-	u16 assoc_id;
-
-	/* power save mode related*/
-	short ps;
-	short sta_sleep;
-	int ps_timeout;
-	struct tasklet_struct ps_task;
-	u32 ps_th;
-	u32 ps_tl;
-
-	short raw_tx;
-	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
-	short queue_stop;
-	short scanning;
-	short proto_started;
-
-	struct semaphore wx_sem;
-	struct semaphore scan_sem;
-
-	spinlock_t mgmt_tx_lock;
-	spinlock_t beacon_lock;
-
-	short beacon_txing;
-
-	short wap_set;
-	short ssid_set;
-
-	u8  wpax_type_set;    //{added by David, 2006.9.28}
-	u32 wpax_type_notify; //{added by David, 2006.9.26}
-
-	/* QoS related flag */
-	char init_wmmparam_flag;
-
-	/* for discarding duplicated packets in IBSS */
-	struct list_head ibss_mac_hash[IEEE_IBSS_MAC_HASH_SIZE];
-
-	/* for discarding duplicated packets in BSS */
-	u16 last_rxseq_num[17]; /* rx seq previous per-tid */
-	u16 last_rxfrag_num[17];/* tx frag previous per-tid */
-	unsigned long last_packet_time[17];
-
-	/* for PS mode */
-	unsigned long last_rx_ps_time;
-
-	/* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
-	struct sk_buff *mgmt_queue_ring[MGMT_QUEUE_NUM];
-	int mgmt_queue_head;
-	int mgmt_queue_tail;
-
-
-	/* used if IEEE_SOFTMAC_TX_QUEUE is set */
-	struct  tx_pending_t tx_pending;
-
-	/* used if IEEE_SOFTMAC_ASSOCIATE is set */
-	struct timer_list associate_timer;
-
-	/* used if IEEE_SOFTMAC_BEACONS is set */
-	struct timer_list beacon_timer;
-
-	struct work_struct associate_complete_wq;
-//	struct work_struct associate_retry_wq;
-	struct work_struct associate_procedure_wq;
-//	struct work_struct softmac_scan_wq;
-	struct work_struct wx_sync_scan_wq;
-	struct work_struct wmm_param_update_wq;
-	struct work_struct ps_request_tx_ack_wq;//for ps
-//	struct work_struct hw_wakeup_wq;
-//	struct work_struct hw_sleep_wq;
-//	struct work_struct watch_dog_wq;
-	bool bInactivePs;
-	bool actscanning;
-	bool beinretry;
-	u16 ListenInterval;
-	unsigned long NumRxDataInPeriod; //YJ,add,080828
-	unsigned long NumRxBcnInPeriod;  //YJ,add,080828
-	unsigned long NumRxOkTotal;
-	unsigned long NumRxUnicast;//YJ,add,080828,for keep alive
-	bool bHwRadioOff;
-        struct delayed_work softmac_scan_wq;
-        struct delayed_work associate_retry_wq;
-	struct delayed_work hw_wakeup_wq;
-	struct delayed_work hw_sleep_wq;//+by amy 080324
-	struct delayed_work watch_dog_wq;
-	struct delayed_work sw_antenna_wq;
-	struct delayed_work  start_ibss_wq;
-//by amy for rate adaptive 080312
-    struct delayed_work rate_adapter_wq;
-//by amy for rate adaptive
-	struct delayed_work hw_dig_wq;
-	struct delayed_work tx_pw_wq;
-
-//Added for RF power on power off by lizhaoming 080512
-	struct delayed_work GPIOChangeRFWorkItem;
-
-	struct workqueue_struct *wq;
-
-	/* Callback functions */
-	void (*set_security)(struct net_device *dev,
-			     struct ieee80211_security *sec);
-
-	/* Used to TX data frame by using txb structs.
-	 * this is not used if in the softmac_features
-	 * is set the flag IEEE_SOFTMAC_TX_QUEUE
-	 */
-	int (*hard_start_xmit)(struct ieee80211_txb *txb,
-			       struct net_device *dev);
-
-	int (*reset_port)(struct net_device *dev);
-
-	/* Softmac-generated frames (management) are TXed via this
-	 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
-	 * not set. As some cards may have different HW queues that
-	 * one might want to use for data and management frames
-	 * the option to have two callbacks might be useful.
-	 * This function can't sleep.
-	 */
-	int (*softmac_hard_start_xmit)(struct sk_buff *skb,
-			       struct net_device *dev);
-
-	/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
-	 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
-	 * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
-	 * then also management frames are sent via this callback.
-	 * This function can't sleep.
-	 */
-	void (*softmac_data_hard_start_xmit)(struct sk_buff *skb,
-			       struct net_device *dev,int rate);
-
-	/* stops the HW queue for DATA frames. Useful to avoid
-	 * waste time to TX data frame when we are reassociating
-	 * This function can sleep.
-	 */
-	void (*data_hard_stop)(struct net_device *dev);
-
-	/* OK this is complementar to data_poll_hard_stop */
-	void (*data_hard_resume)(struct net_device *dev);
-
-	/* ask to the driver to retune the radio .
-	 * This function can sleep. the driver should ensure
-	 * the radio has been switched before return.
-	 */
-	void (*set_chan)(struct net_device *dev,short ch);
-
-	/* These are not used if the ieee stack takes care of
-	 * scanning (IEEE_SOFTMAC_SCAN feature set).
-	 * In this case only the set_chan is used.
-	 *
-	 * The syncro version is similar to the start_scan but
-	 * does not return until all channels has been scanned.
-	 * this is called in user context and should sleep,
-	 * it is called in a work_queue when switching to ad-hoc mode
-	 * or in behalf of iwlist scan when the card is associated
-	 * and root user ask for a scan.
-	 * the function stop_scan should stop both the syncro and
-	 * background scanning and can sleep.
-	 * The function start_scan should initiate the background
-	 * scanning and can't sleep.
-	 */
-	void (*scan_syncro)(struct net_device *dev);
-	void (*start_scan)(struct net_device *dev);
-	void (*stop_scan)(struct net_device *dev);
-
-	/* indicate the driver that the link state is changed
-	 * for example it may indicate the card is associated now.
-	 * Driver might be interested in this to apply RX filter
-	 * rules or simply light the LINK led
-	 */
-	void (*link_change)(struct net_device *dev);
-
-	/* these two function indicates to the HW when to start
-	 * and stop to send beacons. This is used when the
-	 * IEEE_SOFTMAC_BEACONS is not set. For now the
-	 * stop_send_bacons is NOT guaranteed to be called only
-	 * after start_send_beacons.
-	 */
-	void (*start_send_beacons) (struct net_device *dev);
-	void (*stop_send_beacons) (struct net_device *dev);
-
-	/* power save mode related */
-	void (*sta_wake_up) (struct net_device *dev);
-	void (*ps_request_tx_ack) (struct net_device *dev);
-	void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
-	short (*ps_is_queue_empty) (struct net_device *dev);
-
-	/* QoS related */
-	//void (*wmm_param_update) (struct net_device *dev, u8 *ac_param);
-	//void (*wmm_param_update) (struct ieee80211_device *ieee);
-
-	/* This must be the last item so that it points to the data
-	 * allocated beyond this structure by alloc_ieee80211 */
-	u8 priv[0];
-};
-
-#define IEEE_A            (1<<0)
-#define IEEE_B            (1<<1)
-#define IEEE_G            (1<<2)
-#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
-
-/* Generate a 802.11 header */
-
-/* Uses the channel change callback directly
- * instead of [start/stop] scan callbacks
- */
-#define IEEE_SOFTMAC_SCAN (1<<2)
-
-/* Perform authentication and association handshake */
-#define IEEE_SOFTMAC_ASSOCIATE (1<<3)
-
-/* Generate probe requests */
-#define IEEE_SOFTMAC_PROBERQ (1<<4)
-
-/* Generate response to probe requests */
-#define IEEE_SOFTMAC_PROBERS (1<<5)
-
-/* The ieee802.11 stack will manages the netif queue
- * wake/stop for the driver, taking care of 802.11
- * fragmentation. See softmac.c for details. */
-#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
-
-/* Uses only the softmac_data_hard_start_xmit
- * even for TX management frames.
- */
-#define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
-
-/* Generate beacons.  The stack will enqueue beacons
- * to the card
- */
-#define IEEE_SOFTMAC_BEACONS (1<<6)
-
-
-
-static inline void *ieee80211_priv(struct net_device *dev)
-{
-	return ((struct ieee80211_device *)netdev_priv(dev))->priv;
-}
-
-static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
-{
-	/* Single white space is for Linksys APs */
-	if (essid_len == 1 && essid[0] == ' ')
-		return 1;
-
-	/* Otherwise, if the entire essid is 0, we assume it is hidden */
-	while (essid_len) {
-		essid_len--;
-		if (essid[essid_len] != '\0')
-			return 0;
-	}
-
-	return 1;
-}
-
-static inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee,
-					  int mode)
-{
-	/*
-	 * It is possible for both access points and our device to support
-	 * combinations of modes, so as long as there is one valid combination
-	 * of ap/device supported modes, then return success
-	 *
-	 */
-	if ((mode & IEEE_A) &&
-	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_52GHZ_BAND))
-		return 1;
-
-	if ((mode & IEEE_G) &&
-	    (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
-		return 1;
-
-	if ((mode & IEEE_B) &&
-	    (ieee->modulation & IEEE80211_CCK_MODULATION) &&
-	    (ieee->freq_band & IEEE80211_24GHZ_BAND))
-		return 1;
-
-	return 0;
-}
-
-static inline int ieee80211_get_hdrlen(u16 fc)
-{
-	int hdrlen = 24;
-
-	switch (WLAN_FC_GET_TYPE(fc)) {
-	case IEEE80211_FTYPE_DATA:
-		if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
-			hdrlen = 30; /* Addr4 */
-		if(IEEE80211_QOS_HAS_SEQ(fc))
-			hdrlen += 2; /* QOS ctrl*/
-		break;
-	case IEEE80211_FTYPE_CTL:
-		switch (WLAN_FC_GET_STYPE(fc)) {
-		case IEEE80211_STYPE_CTS:
-		case IEEE80211_STYPE_ACK:
-			hdrlen = 10;
-			break;
-		default:
-			hdrlen = 16;
-			break;
-		}
-		break;
-	}
-
-	return hdrlen;
-}
-
-
-
-/* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev);
-extern struct net_device *alloc_ieee80211(int sizeof_priv);
-
-extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
-
-/* ieee80211_tx.c */
-
-extern int ieee80211_encrypt_fragment(struct ieee80211_device *ieee,
-				      struct sk_buff *frag, int hdr_len);
-
-extern int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev);
-extern void ieee80211_txb_free(struct ieee80211_txb *);
-
-
-/* ieee80211_rx.c */
-extern int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
-			    struct ieee80211_rx_stats *rx_stats);
-extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
-			     struct ieee80211_hdr_4addr *header,
-			     struct ieee80211_rx_stats *stats);
-
-/* ieee80211_wx.c */
-extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
-				   struct iw_request_info *info,
-				   union iwreq_data *wrqu, char *key);
-extern int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
-				       struct iw_request_info *info,
-				       union iwreq_data *wrqu, char *extra);
-int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  struct iw_param *data, char *extra);
-int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra);
-
-int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len);
-/* ieee80211_softmac.c */
-extern short ieee80211_is_54g(const struct ieee80211_network *net);
-extern short ieee80211_is_shortslot(const struct ieee80211_network *net);
-extern int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee,
-				      struct sk_buff *skb,
-				      struct ieee80211_rx_stats *rx_stats,
-				      u16 type, u16 stype);
-extern void ieee80211_softmac_new_net(struct ieee80211_device *ieee,
-				      struct ieee80211_network *net);
-
-extern void ieee80211_softmac_xmit(struct ieee80211_txb *txb,
-				   struct ieee80211_device *ieee);
-extern void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee);
-extern void ieee80211_start_bss(struct ieee80211_device *ieee);
-extern void ieee80211_start_master_bss(struct ieee80211_device *ieee);
-extern void ieee80211_start_ibss(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_init(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_free(struct ieee80211_device *ieee);
-extern void ieee80211_associate_abort(struct ieee80211_device *ieee);
-extern void ieee80211_disassociate(struct ieee80211_device *ieee);
-extern void ieee80211_stop_scan(struct ieee80211_device *ieee);
-extern void ieee80211_start_scan_syncro(struct ieee80211_device *ieee);
-extern void ieee80211_check_all_nets(struct ieee80211_device *ieee);
-extern void ieee80211_start_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_stop_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee);
-extern void ieee80211_reset_queue(struct ieee80211_device *ieee);
-extern void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee);
-extern void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee);
-extern struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee);
-extern void ieee80211_start_send_beacons(struct ieee80211_device *ieee);
-extern void ieee80211_stop_send_beacons(struct ieee80211_device *ieee);
-extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee,
-					  struct iw_point *p);
-extern void notify_wx_assoc_event(struct ieee80211_device *ieee);
-extern void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success);
-extern void SendDisassociation(struct ieee80211_device *ieee, u8 *asSta,
-			       u8 asRsn);
-extern void ieee80211_rtl_start_scan(struct ieee80211_device *ieee);
-
-//Add for RF power on power off by lizhaoming 080512
-extern void SendDisassociation(struct ieee80211_device *ieee, u8 *asSta,
-			       u8 asRsn);
-
-/* ieee80211_crypt_ccmp&tkip&wep.c */
-extern void ieee80211_tkip_null(void);
-extern void ieee80211_wep_null(void);
-extern void ieee80211_ccmp_null(void);
-/* ieee80211_softmac_wx.c */
-
-extern int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *ext);
-
-extern int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
-				struct iw_request_info *info,
-				union iwreq_data *awrq,
-				char *extra);
-
-extern int ieee80211_wx_get_essid(struct ieee80211_device *ieee,
-				  struct iw_request_info *a,
-				  union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_set_mode(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_scan(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
-				  struct iw_request_info *a,
-				  union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_mode(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_set_freq(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern int ieee80211_wx_get_freq(struct ieee80211_device *ieee,
-				 struct iw_request_info *a,
-				 union iwreq_data *wrqu, char *b);
-
-extern void ieee80211_wx_sync_scan_wq(struct work_struct *work);
-
-extern int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_name(struct ieee80211_device *ieee,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_set_power(struct ieee80211_device *ieee,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra);
-
-extern int ieee80211_wx_get_power(struct ieee80211_device *ieee,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra);
-
-extern void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee);
-
-extern void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee,
-					     short pwr);
-
-extern const long ieee80211_wlan_frequencies[];
-
-extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
-{
-	ieee->scans++;
-}
-
-extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
-{
-	return ieee->scans;
-}
-
-static inline const char *escape_essid(const char *essid, u8 essid_len) {
-	static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
-	const char *s = essid;
-	char *d = escaped;
-
-	if (ieee80211_is_empty_essid(essid, essid_len)) {
-		memcpy(escaped, "<hidden>", sizeof("<hidden>"));
-		return escaped;
-	}
-
-	essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
-	while (essid_len--) {
-		if (*s == '\0') {
-			*d++ = '\\';
-			*d++ = '0';
-			s++;
-		} else {
-			*d++ = *s++;
-		}
-	}
-	*d = '\0';
-	return escaped;
-}
-#endif /* IEEE80211_H */
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
deleted file mode 100644
index 101f0c0cdb0a..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Host AP crypto routines
- *
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- * Portions Copyright (C) 2004, Intel Corporation <jketreno@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-//#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-
-#include "ieee80211.h"
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("HostAP crypto");
-MODULE_LICENSE("GPL");
-
-struct ieee80211_crypto_alg {
-	struct list_head list;
-	struct ieee80211_crypto_ops *ops;
-};
-
-
-struct ieee80211_crypto {
-	struct list_head algs;
-	spinlock_t lock;
-};
-
-static struct ieee80211_crypto *hcrypt;
-
-void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, int force)
-{
-	struct list_head *ptr, *n;
-	struct ieee80211_crypt_data *entry;
-
-	for (ptr = ieee->crypt_deinit_list.next, n = ptr->next;
-	     ptr != &ieee->crypt_deinit_list; ptr = n, n = ptr->next) {
-		entry = list_entry(ptr, struct ieee80211_crypt_data, list);
-
-		if (atomic_read(&entry->refcnt) != 0 && !force)
-			continue;
-
-		list_del(ptr);
-
-		if (entry->ops)
-			entry->ops->deinit(entry->priv);
-		kfree(entry);
-	}
-}
-
-void ieee80211_crypt_deinit_handler(unsigned long data)
-{
-	struct ieee80211_device *ieee = (struct ieee80211_device *)data;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	ieee80211_crypt_deinit_entries(ieee, 0);
-	if (!list_empty(&ieee->crypt_deinit_list)) {
-		pr_debug("entries remaining in delayed crypt deletion list\n");
-		ieee->crypt_deinit_timer.expires = jiffies + HZ;
-		add_timer(&ieee->crypt_deinit_timer);
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-}
-
-void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
-				    struct ieee80211_crypt_data **crypt)
-{
-	struct ieee80211_crypt_data *tmp;
-	unsigned long flags;
-
-	if (*crypt == NULL)
-		return;
-
-	tmp = *crypt;
-	*crypt = NULL;
-
-	/* must not run ops->deinit() while there may be pending encrypt or
-	 * decrypt operations. Use a list of delayed deinits to avoid needing
-	 * locking. */
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	list_add(&tmp->list, &ieee->crypt_deinit_list);
-	if (!timer_pending(&ieee->crypt_deinit_timer)) {
-		ieee->crypt_deinit_timer.expires = jiffies + HZ;
-		add_timer(&ieee->crypt_deinit_timer);
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops)
-{
-	unsigned long flags;
-	struct ieee80211_crypto_alg *alg;
-
-	if (hcrypt == NULL)
-		return -1;
-
-	alg = kzalloc(sizeof(*alg), GFP_KERNEL);
-	if (alg == NULL)
-		return -ENOMEM;
-
-	alg->ops = ops;
-
-	spin_lock_irqsave(&hcrypt->lock, flags);
-	list_add(&alg->list, &hcrypt->algs);
-	spin_unlock_irqrestore(&hcrypt->lock, flags);
-
-	pr_debug("registered algorithm '%s'\n", ops->name);
-
-	return 0;
-}
-
-int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops)
-{
-	unsigned long flags;
-	struct list_head *ptr;
-	struct ieee80211_crypto_alg *del_alg = NULL;
-
-	if (hcrypt == NULL)
-		return -1;
-
-	spin_lock_irqsave(&hcrypt->lock, flags);
-	for (ptr = hcrypt->algs.next; ptr != &hcrypt->algs; ptr = ptr->next) {
-		struct ieee80211_crypto_alg *alg =
-			(struct ieee80211_crypto_alg *) ptr;
-		if (alg->ops == ops) {
-			list_del(&alg->list);
-			del_alg = alg;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&hcrypt->lock, flags);
-
-	if (del_alg) {
-		pr_debug("unregistered algorithm '%s'\n", ops->name);
-		kfree(del_alg);
-	}
-
-	return del_alg ? 0 : -1;
-}
-
-
-struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name)
-{
-	unsigned long flags;
-	struct list_head *ptr;
-	struct ieee80211_crypto_alg *found_alg = NULL;
-
-	if (hcrypt == NULL)
-		return NULL;
-
-	spin_lock_irqsave(&hcrypt->lock, flags);
-	for (ptr = hcrypt->algs.next; ptr != &hcrypt->algs; ptr = ptr->next) {
-		struct ieee80211_crypto_alg *alg =
-			(struct ieee80211_crypto_alg *) ptr;
-		if (strcmp(alg->ops->name, name) == 0) {
-			found_alg = alg;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&hcrypt->lock, flags);
-
-	if (found_alg)
-		return found_alg->ops;
-	else
-		return NULL;
-}
-
-
-static void *ieee80211_crypt_null_init(int keyidx) { return (void *) 1; }
-static void ieee80211_crypt_null_deinit(void *priv) {}
-
-static struct ieee80211_crypto_ops ieee80211_crypt_null = {
-	.name			= "NULL",
-	.init			= ieee80211_crypt_null_init,
-	.deinit			= ieee80211_crypt_null_deinit,
-	.encrypt_mpdu		= NULL,
-	.decrypt_mpdu		= NULL,
-	.encrypt_msdu		= NULL,
-	.decrypt_msdu		= NULL,
-	.set_key		= NULL,
-	.get_key		= NULL,
-	.extra_prefix_len	= 0,
-	.extra_postfix_len	= 0,
-	.owner			= THIS_MODULE,
-};
-
-
-int ieee80211_crypto_init(void)
-{
-	int ret = -ENOMEM;
-
-	hcrypt = kzalloc(sizeof(*hcrypt), GFP_KERNEL);
-	if (!hcrypt)
-		goto out;
-
-	INIT_LIST_HEAD(&hcrypt->algs);
-	spin_lock_init(&hcrypt->lock);
-
-	ret = ieee80211_register_crypto_ops(&ieee80211_crypt_null);
-	if (ret < 0) {
-		kfree(hcrypt);
-		hcrypt = NULL;
-	}
-out:
-	return ret;
-}
-
-
-void ieee80211_crypto_deinit(void)
-{
-	struct list_head *ptr, *n;
-	struct ieee80211_crypto_alg *alg = NULL;
-
-	if (hcrypt == NULL)
-		return;
-
-	list_for_each_safe(ptr, n, &hcrypt->algs) {
-		alg = list_entry(ptr, struct ieee80211_crypto_alg, list);
-		if (alg) {
-			list_del(ptr);
-			pr_debug("unregistered algorithm '%s' (deinit)\n",
-				 alg->ops->name);
-			kfree(alg);
-		}
-	}
-	kfree(hcrypt);
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h
deleted file mode 100644
index 0b4ea431982d..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Original code based on Host AP (software wireless LAN access point) driver
- * for Intersil Prism2/2.5/3.
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * Adaption to a generic IEEE 802.11 stack by James Ketrenos
- * <jketreno@linux.intel.com>
- *
- * Copyright (c) 2004, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-
-/*
- * This file defines the interface to the ieee80211 crypto module.
- */
-#ifndef IEEE80211_CRYPT_H
-#define IEEE80211_CRYPT_H
-
-#include <linux/skbuff.h>
-
-struct ieee80211_crypto_ops {
-	const char *name;
-
-	/* init new crypto context (e.g., allocate private data space,
-	 * select IV, etc.); returns NULL on failure or pointer to allocated
-	 * private data on success */
-	void * (*init)(int keyidx);
-
-	/* deinitialize crypto context and free allocated private data */
-	void (*deinit)(void *priv);
-
-	/* encrypt/decrypt return < 0 on error or >= 0 on success. The return
-	 * value from decrypt_mpdu is passed as the keyidx value for
-	 * decrypt_msdu. skb must have enough head and tail room for the
-	 * encryption; if not, error will be returned; these functions are
-	 * called for all MPDUs (i.e., fragments).
-	 */
-	int (*encrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
-	int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
-
-	/* These functions are called for full MSDUs, i.e. full frames.
-	 * These can be NULL if full MSDU operations are not needed. */
-	int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
-	int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
-			    void *priv);
-
-	int (*set_key)(void *key, int len, u8 *seq, void *priv);
-	int (*get_key)(void *key, int len, u8 *seq, void *priv);
-
-	/* procfs handler for printing out key information and possible
-	 * statistics */
-	char * (*print_stats)(char *p, void *priv);
-
-	/* maximum number of bytes added by encryption; encrypt buf is
-	 * allocated with extra_prefix_len bytes, copy of in_buf, and
-	 * extra_postfix_len; encrypt need not use all this space, but
-	 * the result must start at the beginning of the buffer and correct
-	 * length must be returned */
-	int extra_prefix_len, extra_postfix_len;
-
-	struct module *owner;
-};
-
-struct ieee80211_crypt_data {
-	struct list_head list; /* delayed deletion list */
-	struct ieee80211_crypto_ops *ops;
-	void *priv;
-	atomic_t refcnt;
-};
-
-int ieee80211_register_crypto_ops(struct ieee80211_crypto_ops *ops);
-int ieee80211_unregister_crypto_ops(struct ieee80211_crypto_ops *ops);
-struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name);
-void ieee80211_crypt_deinit_entries(struct ieee80211_device *, int);
-void ieee80211_crypt_deinit_handler(unsigned long);
-void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
-				    struct ieee80211_crypt_data **crypt);
-
-#endif
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
deleted file mode 100644
index 4fe253818630..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_ccmp.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Host AP crypt: host-based CCMP encryption implementation for Host AP driver
- *
- * Copyright (c) 2003-2004, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/if_ether.h>
-#include <linux/if_arp.h>
-#include <linux/string.h>
-#include <linux/wireless.h>
-
-#include "ieee80211.h"
-
-#include <linux/crypto.h>
-#include <linux/scatterlist.h>
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Host AP crypt: CCMP");
-MODULE_LICENSE("GPL");
-
-
-#define AES_BLOCK_LEN 16
-#define CCMP_HDR_LEN 8
-#define CCMP_MIC_LEN 8
-#define CCMP_TK_LEN 16
-#define CCMP_PN_LEN 6
-
-struct ieee80211_ccmp_data {
-	u8 key[CCMP_TK_LEN];
-	int key_set;
-
-	u8 tx_pn[CCMP_PN_LEN];
-	u8 rx_pn[CCMP_PN_LEN];
-
-	u32 dot11RSNAStatsCCMPFormatErrors;
-	u32 dot11RSNAStatsCCMPReplays;
-	u32 dot11RSNAStatsCCMPDecryptErrors;
-
-	int key_idx;
-
-	struct crypto_tfm *tfm;
-
-	/* scratch buffers for virt_to_page() (crypto API) */
-	u8 tx_b0[AES_BLOCK_LEN], tx_b[AES_BLOCK_LEN],
-		tx_e[AES_BLOCK_LEN], tx_s0[AES_BLOCK_LEN];
-	u8 rx_b0[AES_BLOCK_LEN], rx_b[AES_BLOCK_LEN], rx_a[AES_BLOCK_LEN];
-};
-
-static void ieee80211_ccmp_aes_encrypt(struct crypto_tfm *tfm,
-				const u8 pt[16], u8 ct[16])
-{
-	crypto_cipher_encrypt_one((void *)tfm, ct, pt);
-}
-
-static void *ieee80211_ccmp_init(int key_idx)
-{
-	struct ieee80211_ccmp_data *priv;
-
-	priv = kzalloc(sizeof(*priv), GFP_ATOMIC);
-	if (priv == NULL)
-		goto fail;
-	priv->key_idx = key_idx;
-
-	priv->tfm = (void *)crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->tfm)) {
-		pr_debug("could not allocate crypto API aes\n");
-		priv->tfm = NULL;
-		goto fail;
-	}
-
-	return priv;
-
-fail:
-	if (priv) {
-		if (priv->tfm)
-			crypto_free_cipher((void *)priv->tfm);
-		kfree(priv);
-	}
-
-	return NULL;
-}
-
-
-static void ieee80211_ccmp_deinit(void *priv)
-{
-	struct ieee80211_ccmp_data *_priv = priv;
-
-	if (_priv && _priv->tfm)
-		crypto_free_cipher((void *)_priv->tfm);
-	kfree(priv);
-}
-
-
-static inline void xor_block(u8 *b, u8 *a, size_t len)
-{
-	int i;
-	for (i = 0; i < len; i++)
-		b[i] ^= a[i];
-}
-
-static void ccmp_init_blocks(struct crypto_tfm *tfm,
-			     struct ieee80211_hdr_4addr *hdr,
-			     u8 *pn, size_t dlen, u8 *b0, u8 *auth,
-			     u8 *s0)
-{
-	u8 *pos, qc = 0;
-	size_t aad_len;
-	u16 fc;
-	int a4_included, qc_included;
-	u8 aad[2 * AES_BLOCK_LEN];
-
-	fc = le16_to_cpu(hdr->frame_ctl);
-	a4_included = ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-		       (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS));
-	/*
-	qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
-		       (WLAN_FC_GET_STYPE(fc) & 0x08));
-	*/
-	qc_included = ((WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA) &&
-		       (WLAN_FC_GET_STYPE(fc) & 0x80));
-	aad_len = 22;
-	if (a4_included)
-		aad_len += 6;
-	if (qc_included) {
-		pos = (u8 *) &hdr->addr4;
-		if (a4_included)
-			pos += 6;
-		qc = *pos & 0x0f;
-		aad_len += 2;
-	}
-	/* CCM Initial Block:
-	 * Flag (Include authentication header, M=3 (8-octet MIC),
-	 *       L=1 (2-octet Dlen))
-	 * Nonce: 0x00 | A2 | PN
-	 * Dlen */
-	b0[0] = 0x59;
-	b0[1] = qc;
-	memcpy(b0 + 2, hdr->addr2, ETH_ALEN);
-	memcpy(b0 + 8, pn, CCMP_PN_LEN);
-	b0[14] = (dlen >> 8) & 0xff;
-	b0[15] = dlen & 0xff;
-
-	/* AAD:
-	 * FC with bits 4..6 and 11..13 masked to zero; 14 is always one
-	 * A1 | A2 | A3
-	 * SC with bits 4..15 (seq#) masked to zero
-	 * A4 (if present)
-	 * QC (if present)
-	 */
-	pos = (u8 *) hdr;
-	aad[0] = 0; /* aad_len >> 8 */
-	aad[1] = aad_len & 0xff;
-	aad[2] = pos[0] & 0x8f;
-	aad[3] = pos[1] & 0xc7;
-	memcpy(aad + 4, hdr->addr1, 3 * ETH_ALEN);
-	pos = (u8 *) &hdr->seq_ctl;
-	aad[22] = pos[0] & 0x0f;
-	aad[23] = 0; /* all bits masked */
-	memset(aad + 24, 0, 8);
-	if (a4_included)
-		memcpy(aad + 24, hdr->addr4, ETH_ALEN);
-	if (qc_included) {
-		aad[a4_included ? 30 : 24] = qc;
-		/* rest of QC masked */
-	}
-
-	/* Start with the first block and AAD */
-	ieee80211_ccmp_aes_encrypt(tfm, b0, auth);
-	xor_block(auth, aad, AES_BLOCK_LEN);
-	ieee80211_ccmp_aes_encrypt(tfm, auth, auth);
-	xor_block(auth, &aad[AES_BLOCK_LEN], AES_BLOCK_LEN);
-	ieee80211_ccmp_aes_encrypt(tfm, auth, auth);
-	b0[0] &= 0x07;
-	b0[14] = b0[15] = 0;
-	ieee80211_ccmp_aes_encrypt(tfm, b0, s0);
-}
-
-static int ieee80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct ieee80211_ccmp_data *key = priv;
-	int data_len, i;
-	u8 *pos;
-	struct ieee80211_hdr_4addr *hdr;
-	int blocks, last, len;
-	u8 *mic;
-	u8 *b0 = key->tx_b0;
-	u8 *b = key->tx_b;
-	u8 *e = key->tx_e;
-	u8 *s0 = key->tx_s0;
-
-	if (skb_headroom(skb) < CCMP_HDR_LEN ||
-	    skb_tailroom(skb) < CCMP_MIC_LEN ||
-	    skb->len < hdr_len)
-		return -1;
-
-	data_len = skb->len - hdr_len;
-	pos = skb_push(skb, CCMP_HDR_LEN);
-	memmove(pos, pos + CCMP_HDR_LEN, hdr_len);
-	pos += hdr_len;
-
-	i = CCMP_PN_LEN - 1;
-	while (i >= 0) {
-		key->tx_pn[i]++;
-		if (key->tx_pn[i] != 0)
-			break;
-		i--;
-	}
-
-	*pos++ = key->tx_pn[5];
-	*pos++ = key->tx_pn[4];
-	*pos++ = 0;
-	*pos++ = (key->key_idx << 6) | (1 << 5) /* Ext IV included */;
-	*pos++ = key->tx_pn[3];
-	*pos++ = key->tx_pn[2];
-	*pos++ = key->tx_pn[1];
-	*pos++ = key->tx_pn[0];
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	mic = skb_put(skb, CCMP_MIC_LEN);
-
-	ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0);
-
-	blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
-	last = data_len % AES_BLOCK_LEN;
-
-	for (i = 1; i <= blocks; i++) {
-		len = (i == blocks && last) ? last : AES_BLOCK_LEN;
-		/* Authentication */
-		xor_block(b, pos, len);
-		ieee80211_ccmp_aes_encrypt(key->tfm, b, b);
-		/* Encryption, with counter */
-		b0[14] = (i >> 8) & 0xff;
-		b0[15] = i & 0xff;
-		ieee80211_ccmp_aes_encrypt(key->tfm, b0, e);
-		xor_block(pos, e, len);
-		pos += len;
-	}
-
-	for (i = 0; i < CCMP_MIC_LEN; i++)
-		mic[i] = b[i] ^ s0[i];
-
-	return 0;
-}
-
-
-static int ieee80211_ccmp_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct ieee80211_ccmp_data *key = priv;
-	u8 keyidx, *pos;
-	struct ieee80211_hdr_4addr *hdr;
-	u8 pn[6];
-	size_t data_len = skb->len - hdr_len - CCMP_HDR_LEN - CCMP_MIC_LEN;
-	u8 *mic = skb->data + skb->len - CCMP_MIC_LEN;
-	u8 *b0 = key->rx_b0;
-	u8 *b = key->rx_b;
-	u8 *a = key->rx_a;
-	int i, blocks, last, len;
-
-	if (skb->len < hdr_len + CCMP_HDR_LEN + CCMP_MIC_LEN) {
-		key->dot11RSNAStatsCCMPFormatErrors++;
-		return -1;
-	}
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	pos = skb->data + hdr_len;
-	keyidx = pos[3];
-	if (!(keyidx & (1 << 5))) {
-		if (net_ratelimit()) {
-			pr_debug("received packet without ExtIV flag from %pM\n",
-				 hdr->addr2);
-		}
-		key->dot11RSNAStatsCCMPFormatErrors++;
-		return -2;
-	}
-	keyidx >>= 6;
-	if (key->key_idx != keyidx) {
-		pr_debug("RX tkey->key_idx=%d frame keyidx=%d priv=%p\n",
-			 key->key_idx, keyidx, priv);
-		return -6;
-	}
-	if (!key->key_set) {
-		if (net_ratelimit()) {
-			pr_debug("received packet from %pM with keyid=%d that does not have a configured key\n",
-				 hdr->addr2, keyidx);
-		}
-		return -3;
-	}
-
-	pn[0] = pos[7];
-	pn[1] = pos[6];
-	pn[2] = pos[5];
-	pn[3] = pos[4];
-	pn[4] = pos[1];
-	pn[5] = pos[0];
-	pos += 8;
-
-	if (memcmp(pn, key->rx_pn, CCMP_PN_LEN) <= 0) {
-		if (net_ratelimit()) {
-			pr_debug("replay detected: STA=%pM previous PN %pm received PN %pm\n",
-				 hdr->addr2, key->rx_pn, pn);
-		}
-		key->dot11RSNAStatsCCMPReplays++;
-		return -4;
-	}
-
-	ccmp_init_blocks(key->tfm, hdr, pn, data_len, b0, a, b);
-	xor_block(mic, b, CCMP_MIC_LEN);
-
-	blocks = (data_len + AES_BLOCK_LEN - 1) / AES_BLOCK_LEN;
-	last = data_len % AES_BLOCK_LEN;
-
-	for (i = 1; i <= blocks; i++) {
-		len = (i == blocks && last) ? last : AES_BLOCK_LEN;
-		/* Decrypt, with counter */
-		b0[14] = (i >> 8) & 0xff;
-		b0[15] = i & 0xff;
-		ieee80211_ccmp_aes_encrypt(key->tfm, b0, b);
-		xor_block(pos, b, len);
-		/* Authentication */
-		xor_block(a, pos, len);
-		ieee80211_ccmp_aes_encrypt(key->tfm, a, a);
-		pos += len;
-	}
-
-	if (memcmp(mic, a, CCMP_MIC_LEN) != 0) {
-		if (net_ratelimit())
-			pr_debug("decrypt failed: STA=%pM\n", hdr->addr2);
-
-		key->dot11RSNAStatsCCMPDecryptErrors++;
-		return -5;
-	}
-
-	memcpy(key->rx_pn, pn, CCMP_PN_LEN);
-
-	/* Remove hdr and MIC */
-	memmove(skb->data + CCMP_HDR_LEN, skb->data, hdr_len);
-	skb_pull(skb, CCMP_HDR_LEN);
-	skb_trim(skb, skb->len - CCMP_MIC_LEN);
-
-	return keyidx;
-}
-
-
-static int ieee80211_ccmp_set_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct ieee80211_ccmp_data *data = priv;
-	int keyidx;
-	struct crypto_tfm *tfm = data->tfm;
-
-	keyidx = data->key_idx;
-	memset(data, 0, sizeof(*data));
-	data->key_idx = keyidx;
-	data->tfm = tfm;
-	if (len == CCMP_TK_LEN) {
-		memcpy(data->key, key, CCMP_TK_LEN);
-		data->key_set = 1;
-		if (seq) {
-			data->rx_pn[0] = seq[5];
-			data->rx_pn[1] = seq[4];
-			data->rx_pn[2] = seq[3];
-			data->rx_pn[3] = seq[2];
-			data->rx_pn[4] = seq[1];
-			data->rx_pn[5] = seq[0];
-		}
-		crypto_cipher_setkey((void *)data->tfm, data->key, CCMP_TK_LEN);
-	} else if (len == 0)
-		data->key_set = 0;
-	else
-		return -1;
-
-	return 0;
-}
-
-
-static int ieee80211_ccmp_get_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct ieee80211_ccmp_data *data = priv;
-
-	if (len < CCMP_TK_LEN)
-		return -1;
-
-	if (!data->key_set)
-		return 0;
-	memcpy(key, data->key, CCMP_TK_LEN);
-
-	if (seq) {
-		seq[0] = data->tx_pn[5];
-		seq[1] = data->tx_pn[4];
-		seq[2] = data->tx_pn[3];
-		seq[3] = data->tx_pn[2];
-		seq[4] = data->tx_pn[1];
-		seq[5] = data->tx_pn[0];
-	}
-
-	return CCMP_TK_LEN;
-}
-
-
-static char *ieee80211_ccmp_print_stats(char *p, void *priv)
-{
-	struct ieee80211_ccmp_data *ccmp = priv;
-	p += sprintf(p,
-		     "key[%d] alg=CCMP key_set=%d tx_pn=%pm rx_pn=%pm format_errors=%d replays=%d decrypt_errors=%d\n",
-		     ccmp->key_idx, ccmp->key_set,
-		     ccmp->tx_pn, ccmp->rx_pn,
-		     ccmp->dot11RSNAStatsCCMPFormatErrors,
-		     ccmp->dot11RSNAStatsCCMPReplays,
-		     ccmp->dot11RSNAStatsCCMPDecryptErrors);
-
-	return p;
-}
-
-void ieee80211_ccmp_null(void)
-{
-	return;
-}
-static struct ieee80211_crypto_ops ieee80211_crypt_ccmp = {
-	.name			= "CCMP",
-	.init			= ieee80211_ccmp_init,
-	.deinit			= ieee80211_ccmp_deinit,
-	.encrypt_mpdu		= ieee80211_ccmp_encrypt,
-	.decrypt_mpdu		= ieee80211_ccmp_decrypt,
-	.encrypt_msdu		= NULL,
-	.decrypt_msdu		= NULL,
-	.set_key		= ieee80211_ccmp_set_key,
-	.get_key		= ieee80211_ccmp_get_key,
-	.print_stats		= ieee80211_ccmp_print_stats,
-	.extra_prefix_len	= CCMP_HDR_LEN,
-	.extra_postfix_len	= CCMP_MIC_LEN,
-	.owner			= THIS_MODULE,
-};
-
-
-int ieee80211_crypto_ccmp_init(void)
-{
-	return ieee80211_register_crypto_ops(&ieee80211_crypt_ccmp);
-}
-
-
-void ieee80211_crypto_ccmp_exit(void)
-{
-	ieee80211_unregister_crypto_ops(&ieee80211_crypt_ccmp);
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c
deleted file mode 100644
index 6c1acc5dfba7..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_tkip.c
+++ /dev/null
@@ -1,740 +0,0 @@
-/*
- * Host AP crypt: host-based TKIP encryption implementation for Host AP driver
- *
- * Copyright (c) 2003-2004, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/if_ether.h>
-#include <linux/if_arp.h>
-#include <asm/string.h>
-
-#include "ieee80211.h"
-
-#include <linux/crypto.h>
-#include <linux/scatterlist.h>
-#include <linux/crc32.h>
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Host AP crypt: TKIP");
-MODULE_LICENSE("GPL");
-
-
-struct ieee80211_tkip_data {
-#define TKIP_KEY_LEN 32
-	u8 key[TKIP_KEY_LEN];
-	int key_set;
-
-	u32 tx_iv32;
-	u16 tx_iv16;
-	u16 tx_ttak[5];
-	int tx_phase1_done;
-
-	u32 rx_iv32;
-	u16 rx_iv16;
-	u16 rx_ttak[5];
-	int rx_phase1_done;
-	u32 rx_iv32_new;
-	u16 rx_iv16_new;
-
-	u32 dot11RSNAStatsTKIPReplays;
-	u32 dot11RSNAStatsTKIPICVErrors;
-	u32 dot11RSNAStatsTKIPLocalMICFailures;
-
-	int key_idx;
-
-	struct crypto_blkcipher *rx_tfm_arc4;
-	struct crypto_hash *rx_tfm_michael;
-	struct crypto_blkcipher *tx_tfm_arc4;
-	struct crypto_hash *tx_tfm_michael;
-	struct crypto_tfm *tfm_arc4;
-	struct crypto_tfm *tfm_michael;
-
-	/* scratch buffers for virt_to_page() (crypto API) */
-	u8 rx_hdr[16], tx_hdr[16];
-};
-
-static void *ieee80211_tkip_init(int key_idx)
-{
-	struct ieee80211_tkip_data *priv;
-
-	priv = kzalloc(sizeof(*priv), GFP_ATOMIC);
-	if (priv == NULL)
-		goto fail;
-	priv->key_idx = key_idx;
-
-	priv->tx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
-						CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->tx_tfm_arc4)) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-		       "crypto API arc4\n");
-		priv->tx_tfm_arc4 = NULL;
-		goto fail;
-	}
-
-	priv->tx_tfm_michael = crypto_alloc_hash("michael_mic", 0,
-						 CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->tx_tfm_michael)) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-		       "crypto API michael_mic\n");
-		priv->tx_tfm_michael = NULL;
-		goto fail;
-	}
-
-	priv->rx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
-						CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->rx_tfm_arc4)) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-		       "crypto API arc4\n");
-		priv->rx_tfm_arc4 = NULL;
-		goto fail;
-	}
-
-	priv->rx_tfm_michael = crypto_alloc_hash("michael_mic", 0,
-						 CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->rx_tfm_michael)) {
-		printk(KERN_DEBUG "ieee80211_crypt_tkip: could not allocate "
-		       "crypto API michael_mic\n");
-		priv->rx_tfm_michael = NULL;
-		goto fail;
-	}
-
-	return priv;
-
-fail:
-	if (priv) {
-		if (priv->tx_tfm_michael)
-			crypto_free_hash(priv->tx_tfm_michael);
-		if (priv->tx_tfm_arc4)
-			crypto_free_blkcipher(priv->tx_tfm_arc4);
-		if (priv->rx_tfm_michael)
-			crypto_free_hash(priv->rx_tfm_michael);
-		if (priv->rx_tfm_arc4)
-			crypto_free_blkcipher(priv->rx_tfm_arc4);
-		kfree(priv);
-	}
-
-	return NULL;
-}
-
-
-static void ieee80211_tkip_deinit(void *priv)
-{
-	struct ieee80211_tkip_data *_priv = priv;
-
-	if (_priv) {
-		if (_priv->tx_tfm_michael)
-			crypto_free_hash(_priv->tx_tfm_michael);
-		if (_priv->tx_tfm_arc4)
-			crypto_free_blkcipher(_priv->tx_tfm_arc4);
-		if (_priv->rx_tfm_michael)
-			crypto_free_hash(_priv->rx_tfm_michael);
-		if (_priv->rx_tfm_arc4)
-			crypto_free_blkcipher(_priv->rx_tfm_arc4);
-	}
-	kfree(priv);
-}
-
-
-static inline u16 RotR1(u16 val)
-{
-	return (val >> 1) | (val << 15);
-}
-
-
-static inline u8 Lo8(u16 val)
-{
-	return val & 0xff;
-}
-
-
-static inline u8 Hi8(u16 val)
-{
-	return val >> 8;
-}
-
-
-static inline u16 Lo16(u32 val)
-{
-	return val & 0xffff;
-}
-
-
-static inline u16 Hi16(u32 val)
-{
-	return val >> 16;
-}
-
-
-static inline u16 Mk16(u8 hi, u8 lo)
-{
-	return lo | (((u16) hi) << 8);
-}
-
-
-static inline u16 Mk16_le(u16 *v)
-{
-	return le16_to_cpu(*v);
-}
-
-
-static const u16 Sbox[256] = {
-	0xC6A5, 0xF884, 0xEE99, 0xF68D, 0xFF0D, 0xD6BD, 0xDEB1, 0x9154,
-	0x6050, 0x0203, 0xCEA9, 0x567D, 0xE719, 0xB562, 0x4DE6, 0xEC9A,
-	0x8F45, 0x1F9D, 0x8940, 0xFA87, 0xEF15, 0xB2EB, 0x8EC9, 0xFB0B,
-	0x41EC, 0xB367, 0x5FFD, 0x45EA, 0x23BF, 0x53F7, 0xE496, 0x9B5B,
-	0x75C2, 0xE11C, 0x3DAE, 0x4C6A, 0x6C5A, 0x7E41, 0xF502, 0x834F,
-	0x685C, 0x51F4, 0xD134, 0xF908, 0xE293, 0xAB73, 0x6253, 0x2A3F,
-	0x080C, 0x9552, 0x4665, 0x9D5E, 0x3028, 0x37A1, 0x0A0F, 0x2FB5,
-	0x0E09, 0x2436, 0x1B9B, 0xDF3D, 0xCD26, 0x4E69, 0x7FCD, 0xEA9F,
-	0x121B, 0x1D9E, 0x5874, 0x342E, 0x362D, 0xDCB2, 0xB4EE, 0x5BFB,
-	0xA4F6, 0x764D, 0xB761, 0x7DCE, 0x527B, 0xDD3E, 0x5E71, 0x1397,
-	0xA6F5, 0xB968, 0x0000, 0xC12C, 0x4060, 0xE31F, 0x79C8, 0xB6ED,
-	0xD4BE, 0x8D46, 0x67D9, 0x724B, 0x94DE, 0x98D4, 0xB0E8, 0x854A,
-	0xBB6B, 0xC52A, 0x4FE5, 0xED16, 0x86C5, 0x9AD7, 0x6655, 0x1194,
-	0x8ACF, 0xE910, 0x0406, 0xFE81, 0xA0F0, 0x7844, 0x25BA, 0x4BE3,
-	0xA2F3, 0x5DFE, 0x80C0, 0x058A, 0x3FAD, 0x21BC, 0x7048, 0xF104,
-	0x63DF, 0x77C1, 0xAF75, 0x4263, 0x2030, 0xE51A, 0xFD0E, 0xBF6D,
-	0x814C, 0x1814, 0x2635, 0xC32F, 0xBEE1, 0x35A2, 0x88CC, 0x2E39,
-	0x9357, 0x55F2, 0xFC82, 0x7A47, 0xC8AC, 0xBAE7, 0x322B, 0xE695,
-	0xC0A0, 0x1998, 0x9ED1, 0xA37F, 0x4466, 0x547E, 0x3BAB, 0x0B83,
-	0x8CCA, 0xC729, 0x6BD3, 0x283C, 0xA779, 0xBCE2, 0x161D, 0xAD76,
-	0xDB3B, 0x6456, 0x744E, 0x141E, 0x92DB, 0x0C0A, 0x486C, 0xB8E4,
-	0x9F5D, 0xBD6E, 0x43EF, 0xC4A6, 0x39A8, 0x31A4, 0xD337, 0xF28B,
-	0xD532, 0x8B43, 0x6E59, 0xDAB7, 0x018C, 0xB164, 0x9CD2, 0x49E0,
-	0xD8B4, 0xACFA, 0xF307, 0xCF25, 0xCAAF, 0xF48E, 0x47E9, 0x1018,
-	0x6FD5, 0xF088, 0x4A6F, 0x5C72, 0x3824, 0x57F1, 0x73C7, 0x9751,
-	0xCB23, 0xA17C, 0xE89C, 0x3E21, 0x96DD, 0x61DC, 0x0D86, 0x0F85,
-	0xE090, 0x7C42, 0x71C4, 0xCCAA, 0x90D8, 0x0605, 0xF701, 0x1C12,
-	0xC2A3, 0x6A5F, 0xAEF9, 0x69D0, 0x1791, 0x9958, 0x3A27, 0x27B9,
-	0xD938, 0xEB13, 0x2BB3, 0x2233, 0xD2BB, 0xA970, 0x0789, 0x33A7,
-	0x2DB6, 0x3C22, 0x1592, 0xC920, 0x8749, 0xAAFF, 0x5078, 0xA57A,
-	0x038F, 0x59F8, 0x0980, 0x1A17, 0x65DA, 0xD731, 0x84C6, 0xD0B8,
-	0x82C3, 0x29B0, 0x5A77, 0x1E11, 0x7BCB, 0xA8FC, 0x6DD6, 0x2C3A,
-};
-
-
-static inline u16 _S_(u16 v)
-{
-	u16 t = Sbox[Hi8(v)];
-	return Sbox[Lo8(v)] ^ ((t << 8) | (t >> 8));
-}
-
-#define PHASE1_LOOP_COUNT 8
-
-static void tkip_mixing_phase1(u16 *TTAK, const u8 *TK, const u8 *TA, u32 IV32)
-{
-	int i, j;
-
-	/* Initialize the 80-bit TTAK from TSC (IV32) and TA[0..5] */
-	TTAK[0] = Lo16(IV32);
-	TTAK[1] = Hi16(IV32);
-	TTAK[2] = Mk16(TA[1], TA[0]);
-	TTAK[3] = Mk16(TA[3], TA[2]);
-	TTAK[4] = Mk16(TA[5], TA[4]);
-
-	for (i = 0; i < PHASE1_LOOP_COUNT; i++) {
-		j = 2 * (i & 1);
-		TTAK[0] += _S_(TTAK[4] ^ Mk16(TK[1 + j], TK[0 + j]));
-		TTAK[1] += _S_(TTAK[0] ^ Mk16(TK[5 + j], TK[4 + j]));
-		TTAK[2] += _S_(TTAK[1] ^ Mk16(TK[9 + j], TK[8 + j]));
-		TTAK[3] += _S_(TTAK[2] ^ Mk16(TK[13 + j], TK[12 + j]));
-		TTAK[4] += _S_(TTAK[3] ^ Mk16(TK[1 + j], TK[0 + j])) + i;
-	}
-}
-
-
-static void tkip_mixing_phase2(u8 *WEPSeed, const u8 *TK, const u16 *TTAK,
-			       u16 IV16)
-{
-	/* Make temporary area overlap WEP seed so that the final copy can be
-	 * avoided on little endian hosts. */
-	u16 *PPK = (u16 *) &WEPSeed[4];
-
-	/* Step 1 - make copy of TTAK and bring in TSC */
-	PPK[0] = TTAK[0];
-	PPK[1] = TTAK[1];
-	PPK[2] = TTAK[2];
-	PPK[3] = TTAK[3];
-	PPK[4] = TTAK[4];
-	PPK[5] = TTAK[4] + IV16;
-
-	/* Step 2 - 96-bit bijective mixing using S-box */
-	PPK[0] += _S_(PPK[5] ^ Mk16_le((u16 *) &TK[0]));
-	PPK[1] += _S_(PPK[0] ^ Mk16_le((u16 *) &TK[2]));
-	PPK[2] += _S_(PPK[1] ^ Mk16_le((u16 *) &TK[4]));
-	PPK[3] += _S_(PPK[2] ^ Mk16_le((u16 *) &TK[6]));
-	PPK[4] += _S_(PPK[3] ^ Mk16_le((u16 *) &TK[8]));
-	PPK[5] += _S_(PPK[4] ^ Mk16_le((u16 *) &TK[10]));
-
-	PPK[0] += RotR1(PPK[5] ^ Mk16_le((u16 *) &TK[12]));
-	PPK[1] += RotR1(PPK[0] ^ Mk16_le((u16 *) &TK[14]));
-	PPK[2] += RotR1(PPK[1]);
-	PPK[3] += RotR1(PPK[2]);
-	PPK[4] += RotR1(PPK[3]);
-	PPK[5] += RotR1(PPK[4]);
-
-	/* Step 3 - bring in last of TK bits, assign 24-bit WEP IV value
-	 * WEPSeed[0..2] is transmitted as WEP IV */
-	WEPSeed[0] = Hi8(IV16);
-	WEPSeed[1] = (Hi8(IV16) | 0x20) & 0x7F;
-	WEPSeed[2] = Lo8(IV16);
-	WEPSeed[3] = Lo8((PPK[5] ^ Mk16_le((u16 *) &TK[0])) >> 1);
-
-#ifdef __BIG_ENDIAN
-	{
-		int i;
-		for (i = 0; i < 6; i++)
-			PPK[i] = (PPK[i] << 8) | (PPK[i] >> 8);
-	}
-#endif
-}
-
-static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	struct blkcipher_desc desc = {.tfm = tkey->tx_tfm_arc4};
-	int len;
-	u8  *pos;
-	struct ieee80211_hdr_4addr *hdr;
-	u8 rc4key[16], *icv;
-	u32 crc;
-	struct scatterlist sg;
-	int ret;
-
-	ret = 0;
-	if (skb_headroom(skb) < 8 || skb_tailroom(skb) < 4 ||
-	    skb->len < hdr_len)
-		return -1;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	if (!tkey->tx_phase1_done) {
-		tkip_mixing_phase1(tkey->tx_ttak, tkey->key, hdr->addr2,
-				   tkey->tx_iv32);
-		tkey->tx_phase1_done = 1;
-	}
-	tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16);
-
-	len = skb->len - hdr_len;
-	pos = skb_push(skb, 8);
-	memmove(pos, pos + 8, hdr_len);
-	pos += hdr_len;
-
-	*pos++ = rc4key[0];
-	*pos++ = rc4key[1];
-	*pos++ = rc4key[2];
-	*pos++ = (tkey->key_idx << 6) | (1 << 5) /* Ext IV included */;
-	*pos++ = tkey->tx_iv32 & 0xff;
-	*pos++ = (tkey->tx_iv32 >> 8) & 0xff;
-	*pos++ = (tkey->tx_iv32 >> 16) & 0xff;
-	*pos++ = (tkey->tx_iv32 >> 24) & 0xff;
-
-	icv = skb_put(skb, 4);
-	crc = ~crc32_le(~0, pos, len);
-	icv[0] = crc;
-	icv[1] = crc >> 8;
-	icv[2] = crc >> 16;
-	icv[3] = crc >> 24;
-	crypto_blkcipher_setkey(tkey->tx_tfm_arc4, rc4key, 16);
-	sg_init_one(&sg, pos, len + 4);
-	ret = crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
-
-	tkey->tx_iv16++;
-	if (tkey->tx_iv16 == 0) {
-		tkey->tx_phase1_done = 0;
-		tkey->tx_iv32++;
-	}
-	   return ret;
-}
-
-static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	struct blkcipher_desc desc = { .tfm = tkey->rx_tfm_arc4 };
-	u8 keyidx, *pos;
-	u32 iv32;
-	u16 iv16;
-	struct ieee80211_hdr_4addr *hdr;
-	u8 icv[4];
-	u32 crc;
-	struct scatterlist sg;
-	u8 rc4key[16];
-	int plen;
-
-	if (skb->len < hdr_len + 8 + 4)
-		return -1;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	pos = skb->data + hdr_len;
-	keyidx = pos[3];
-	if (!(keyidx & (1 << 5))) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TKIP: received packet without ExtIV"
-			       " flag from %pM\n", hdr->addr2);
-		}
-		return -2;
-	}
-	keyidx >>= 6;
-	if (tkey->key_idx != keyidx) {
-		printk(KERN_DEBUG "TKIP: RX tkey->key_idx=%d frame "
-		       "keyidx=%d priv=%p\n", tkey->key_idx, keyidx, priv);
-		return -6;
-	}
-	if (!tkey->key_set) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TKIP: received packet from %pM"
-			       " with keyid=%d that does not have a configured"
-			       " key\n", hdr->addr2, keyidx);
-		}
-		return -3;
-	}
-	iv16 = (pos[0] << 8) | pos[2];
-	iv32 = pos[4] | (pos[5] << 8) | (pos[6] << 16) | (pos[7] << 24);
-	pos += 8;
-
-	if (iv32 < tkey->rx_iv32 ||
-	    (iv32 == tkey->rx_iv32 && iv16 <= tkey->rx_iv16)) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TKIP: replay detected: STA=%pM"
-			       " previous TSC %08x%04x received TSC "
-			       "%08x%04x\n", hdr->addr2,
-			       tkey->rx_iv32, tkey->rx_iv16, iv32, iv16);
-		}
-		tkey->dot11RSNAStatsTKIPReplays++;
-		return -4;
-	}
-
-	if (iv32 != tkey->rx_iv32 || !tkey->rx_phase1_done) {
-		tkip_mixing_phase1(tkey->rx_ttak, tkey->key, hdr->addr2, iv32);
-		tkey->rx_phase1_done = 1;
-	}
-	tkip_mixing_phase2(rc4key, tkey->key, tkey->rx_ttak, iv16);
-
-	plen = skb->len - hdr_len - 12;
-	crypto_blkcipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
-	sg_init_one(&sg, pos, plen + 4);
-	if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4)) {
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG ": TKIP: failed to decrypt "
-			       "received packet from %pM\n",
-			       hdr->addr2);
-		}
-		return -7;
-	}
-
-	crc = ~crc32_le(~0, pos, plen);
-	icv[0] = crc;
-	icv[1] = crc >> 8;
-	icv[2] = crc >> 16;
-	icv[3] = crc >> 24;
-	if (memcmp(icv, pos + plen, 4) != 0) {
-		if (iv32 != tkey->rx_iv32) {
-			/* Previously cached Phase1 result was already lost, so
-			 * it needs to be recalculated for the next packet. */
-			tkey->rx_phase1_done = 0;
-		}
-		if (net_ratelimit()) {
-			printk(KERN_DEBUG "TKIP: ICV error detected: STA="
-			       "%pM\n", hdr->addr2);
-		}
-		tkey->dot11RSNAStatsTKIPICVErrors++;
-		return -5;
-	}
-
-	/* Update real counters only after Michael MIC verification has
-	 * completed */
-	tkey->rx_iv32_new = iv32;
-	tkey->rx_iv16_new = iv16;
-
-	/* Remove IV and ICV */
-	memmove(skb->data + 8, skb->data, hdr_len);
-	skb_pull(skb, 8);
-	skb_trim(skb, skb->len - 4);
-
-	return keyidx;
-}
-
-static int michael_mic(struct crypto_hash *tfm_michael, u8 *key, u8 *hdr,
-			u8 *data, size_t data_len, u8 *mic)
-{
-	struct hash_desc desc;
-	struct scatterlist sg[2];
-
-	if (tfm_michael == NULL) {
-		printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
-		return -1;
-	}
-
-	sg_init_table(sg, 2);
-	sg_set_buf(&sg[0], hdr, 16);
-	sg_set_buf(&sg[1], data, data_len);
-
-	if (crypto_hash_setkey(tfm_michael, key, 8))
-		return -1;
-
-	desc.tfm = tfm_michael;
-	desc.flags = 0;
-	return crypto_hash_digest(&desc, sg, data_len + 16, mic);
-}
-
-static void michael_mic_hdr(struct sk_buff *skb, u8 *hdr)
-{
-	struct ieee80211_hdr_4addr *hdr11;
-
-	hdr11 = (struct ieee80211_hdr_4addr *)skb->data;
-	switch (le16_to_cpu(hdr11->frame_ctl) &
-		(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
-	case IEEE80211_FCTL_TODS:
-		memcpy(hdr, hdr11->addr3, ETH_ALEN); /* DA */
-		memcpy(hdr + ETH_ALEN, hdr11->addr2, ETH_ALEN); /* SA */
-		break;
-	case IEEE80211_FCTL_FROMDS:
-		memcpy(hdr, hdr11->addr1, ETH_ALEN); /* DA */
-		memcpy(hdr + ETH_ALEN, hdr11->addr3, ETH_ALEN); /* SA */
-		break;
-	case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
-		memcpy(hdr, hdr11->addr3, ETH_ALEN); /* DA */
-		memcpy(hdr + ETH_ALEN, hdr11->addr4, ETH_ALEN); /* SA */
-		break;
-	case 0:
-		memcpy(hdr, hdr11->addr1, ETH_ALEN); /* DA */
-		memcpy(hdr + ETH_ALEN, hdr11->addr2, ETH_ALEN); /* SA */
-		break;
-	}
-
-	hdr[12] = 0; /* priority */
-
-	hdr[13] = hdr[14] = hdr[15] = 0; /* reserved */
-}
-
-
-static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len,
-				     void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	u8 *pos;
-	struct ieee80211_hdr_4addr *hdr;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	if (skb_tailroom(skb) < 8 || skb->len < hdr_len) {
-		printk(KERN_DEBUG "Invalid packet for Michael MIC add "
-		       "(tailroom=%d hdr_len=%d skb->len=%d)\n",
-		       skb_tailroom(skb), hdr_len, skb->len);
-		return -1;
-	}
-
-	michael_mic_hdr(skb, tkey->tx_hdr);
-
-	if (IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl)))
-		tkey->tx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
-
-	pos = skb_put(skb, 8);
-
-	if (michael_mic(tkey->tx_tfm_michael, &tkey->key[16], tkey->tx_hdr,
-			skb->data + hdr_len, skb->len - 8 - hdr_len, pos))
-		return -1;
-
-	return 0;
-}
-
-static void ieee80211_michael_mic_failure(struct net_device *dev,
-					  struct ieee80211_hdr_4addr *hdr,
-					  int keyidx)
-{
-	union iwreq_data wrqu;
-	struct iw_michaelmicfailure ev;
-
-	/* TODO: needed parameters: count, keyid, key type, TSC */
-	memset(&ev, 0, sizeof(ev));
-	ev.flags = keyidx & IW_MICFAILURE_KEY_ID;
-	if (hdr->addr1[0] & 0x01)
-		ev.flags |= IW_MICFAILURE_GROUP;
-	else
-		ev.flags |= IW_MICFAILURE_PAIRWISE;
-	ev.src_addr.sa_family = ARPHRD_ETHER;
-	memcpy(ev.src_addr.sa_data, hdr->addr2, ETH_ALEN);
-	memset(&wrqu, 0, sizeof(wrqu));
-	wrqu.data.length = sizeof(ev);
-	wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, (char *) &ev);
-}
-
-static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
-					int hdr_len, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	u8 mic[8];
-	struct ieee80211_hdr_4addr *hdr;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	if (!tkey->key_set)
-		return -1;
-
-	michael_mic_hdr(skb, tkey->rx_hdr);
-	if (IEEE80211_QOS_HAS_SEQ(le16_to_cpu(hdr->frame_ctl)))
-		tkey->rx_hdr[12] = *(skb->data + hdr_len - 2) & 0x07;
-
-	if (michael_mic(tkey->rx_tfm_michael, &tkey->key[24], tkey->rx_hdr,
-			skb->data + hdr_len, skb->len - 8 - hdr_len, mic))
-		return -1;
-
-	if (memcmp(mic, skb->data + skb->len - 8, 8) != 0) {
-		struct ieee80211_hdr_4addr *hdr;
-		hdr = (struct ieee80211_hdr_4addr *)skb->data;
-		printk(KERN_DEBUG "%s: Michael MIC verification failed for "
-		       "MSDU from %pM keyidx=%d\n",
-		       skb->dev ? skb->dev->name : "N/A", hdr->addr2,
-		       keyidx);
-		if (skb->dev)
-			ieee80211_michael_mic_failure(skb->dev, hdr, keyidx);
-		tkey->dot11RSNAStatsTKIPLocalMICFailures++;
-		return -1;
-	}
-
-	/* Update TSC counters for RX now that the packet verification has
-	 * completed. */
-	tkey->rx_iv32 = tkey->rx_iv32_new;
-	tkey->rx_iv16 = tkey->rx_iv16_new;
-
-	skb_trim(skb, skb->len - 8);
-
-	return 0;
-}
-
-
-static int ieee80211_tkip_set_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-	int keyidx;
-	struct crypto_hash *tfm = tkey->tx_tfm_michael;
-	struct crypto_blkcipher *tfm2 = tkey->tx_tfm_arc4;
-	struct crypto_hash *tfm3 = tkey->rx_tfm_michael;
-	struct crypto_blkcipher *tfm4 = tkey->rx_tfm_arc4;
-
-	keyidx = tkey->key_idx;
-	memset(tkey, 0, sizeof(*tkey));
-	tkey->key_idx = keyidx;
-
-	tkey->tx_tfm_michael = tfm;
-	tkey->tx_tfm_arc4 = tfm2;
-	tkey->rx_tfm_michael = tfm3;
-	tkey->rx_tfm_arc4 = tfm4;
-
-	if (len == TKIP_KEY_LEN) {
-		memcpy(tkey->key, key, TKIP_KEY_LEN);
-		tkey->key_set = 1;
-		tkey->tx_iv16 = 1; /* TSC is initialized to 1 */
-		if (seq) {
-			tkey->rx_iv32 = (seq[5] << 24) | (seq[4] << 16) |
-				(seq[3] << 8) | seq[2];
-			tkey->rx_iv16 = (seq[1] << 8) | seq[0];
-		}
-	} else if (len == 0)
-		tkey->key_set = 0;
-	else
-		return -1;
-
-	return 0;
-}
-
-
-static int ieee80211_tkip_get_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct ieee80211_tkip_data *tkey = priv;
-
-	if (len < TKIP_KEY_LEN)
-		return -1;
-
-	if (!tkey->key_set)
-		return 0;
-	memcpy(key, tkey->key, TKIP_KEY_LEN);
-
-	if (seq) {
-		/* Return the sequence number of the last transmitted frame. */
-		u16 iv16 = tkey->tx_iv16;
-		u32 iv32 = tkey->tx_iv32;
-		if (iv16 == 0)
-			iv32--;
-		iv16--;
-		seq[0] = tkey->tx_iv16;
-		seq[1] = tkey->tx_iv16 >> 8;
-		seq[2] = tkey->tx_iv32;
-		seq[3] = tkey->tx_iv32 >> 8;
-		seq[4] = tkey->tx_iv32 >> 16;
-		seq[5] = tkey->tx_iv32 >> 24;
-	}
-
-	return TKIP_KEY_LEN;
-}
-
-
-static char *ieee80211_tkip_print_stats(char *p, void *priv)
-{
-	struct ieee80211_tkip_data *tkip = priv;
-	p += sprintf(p, "key[%d] alg=TKIP key_set=%d "
-		     "tx_pn=%02x%02x%02x%02x%02x%02x "
-		     "rx_pn=%02x%02x%02x%02x%02x%02x "
-		     "replays=%d icv_errors=%d local_mic_failures=%d\n",
-		     tkip->key_idx, tkip->key_set,
-		     (tkip->tx_iv32 >> 24) & 0xff,
-		     (tkip->tx_iv32 >> 16) & 0xff,
-		     (tkip->tx_iv32 >> 8) & 0xff,
-		     tkip->tx_iv32 & 0xff,
-		     (tkip->tx_iv16 >> 8) & 0xff,
-		     tkip->tx_iv16 & 0xff,
-		     (tkip->rx_iv32 >> 24) & 0xff,
-		     (tkip->rx_iv32 >> 16) & 0xff,
-		     (tkip->rx_iv32 >> 8) & 0xff,
-		     tkip->rx_iv32 & 0xff,
-		     (tkip->rx_iv16 >> 8) & 0xff,
-		     tkip->rx_iv16 & 0xff,
-		     tkip->dot11RSNAStatsTKIPReplays,
-		     tkip->dot11RSNAStatsTKIPICVErrors,
-		     tkip->dot11RSNAStatsTKIPLocalMICFailures);
-	return p;
-}
-
-
-static struct ieee80211_crypto_ops ieee80211_crypt_tkip = {
-	.name			= "TKIP",
-	.init			= ieee80211_tkip_init,
-	.deinit			= ieee80211_tkip_deinit,
-	.encrypt_mpdu		= ieee80211_tkip_encrypt,
-	.decrypt_mpdu		= ieee80211_tkip_decrypt,
-	.encrypt_msdu		= ieee80211_michael_mic_add,
-	.decrypt_msdu		= ieee80211_michael_mic_verify,
-	.set_key		= ieee80211_tkip_set_key,
-	.get_key		= ieee80211_tkip_get_key,
-	.print_stats		= ieee80211_tkip_print_stats,
-	.extra_prefix_len	= 4 + 4, /* IV + ExtIV */
-	.extra_postfix_len	= 8 + 4, /* MIC + ICV */
-	.owner		        = THIS_MODULE,
-};
-
-
-int ieee80211_crypto_tkip_init(void)
-{
-	return ieee80211_register_crypto_ops(&ieee80211_crypt_tkip);
-}
-
-
-void ieee80211_crypto_tkip_exit(void)
-{
-	ieee80211_unregister_crypto_ops(&ieee80211_crypt_tkip);
-}
-
-
-void ieee80211_tkip_null(void)
-{
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
deleted file mode 100644
index f25367224941..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt_wep.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Host AP crypt: host-based WEP encryption implementation for Host AP driver
- *
- * Copyright (c) 2002-2004, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/skbuff.h>
-#include <linux/string.h>
-
-#include "ieee80211.h"
-
-#include <linux/crypto.h>
-#include <linux/scatterlist.h>
-#include <linux/crc32.h>
-
-MODULE_AUTHOR("Jouni Malinen");
-MODULE_DESCRIPTION("Host AP crypt: WEP");
-MODULE_LICENSE("GPL");
-
-struct prism2_wep_data {
-	u32 iv;
-#define WEP_KEY_LEN 13
-	u8 key[WEP_KEY_LEN + 1];
-	u8 key_len;
-	u8 key_idx;
-	struct crypto_blkcipher *tx_tfm;
-	struct crypto_blkcipher *rx_tfm;
-};
-
-static void *prism2_wep_init(int keyidx)
-{
-	struct prism2_wep_data *priv;
-
-	priv = kzalloc(sizeof(*priv), GFP_ATOMIC);
-	if (priv == NULL)
-		goto fail;
-	priv->key_idx = keyidx;
-	priv->tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->tx_tfm)) {
-		pr_debug("could not allocate crypto API arc4\n");
-		priv->tx_tfm = NULL;
-		goto fail;
-	}
-	priv->rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(priv->rx_tfm)) {
-		pr_debug("could not allocate crypto API arc4\n");
-		priv->rx_tfm = NULL;
-		goto fail;
-	}
-
-	/* start WEP IV from a random value */
-	get_random_bytes(&priv->iv, 4);
-
-	return priv;
-
-fail:
-	if (priv) {
-		if (priv->tx_tfm)
-			crypto_free_blkcipher(priv->tx_tfm);
-		if (priv->rx_tfm)
-			crypto_free_blkcipher(priv->rx_tfm);
-		kfree(priv);
-	}
-
-	return NULL;
-}
-
-static void prism2_wep_deinit(void *priv)
-{
-	struct prism2_wep_data *_priv = priv;
-
-	if (_priv) {
-		if (_priv->tx_tfm)
-			crypto_free_blkcipher(_priv->tx_tfm);
-		if (_priv->rx_tfm)
-			crypto_free_blkcipher(_priv->rx_tfm);
-	}
-
-	kfree(priv);
-}
-
-/* Perform WEP encryption on given skb that has at least 4 bytes of headroom
- * for IV and 4 bytes of tailroom for ICV. Both IV and ICV will be transmitted,
- * so the payload length increases with 8 bytes.
- *
- * WEP frame payload: IV + TX key idx, RC4(data), ICV = RC4(CRC32(data))
- */
-static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-	struct blkcipher_desc desc = { .tfm = wep->tx_tfm };
-	u32 klen, len;
-	u8 key[WEP_KEY_LEN + 3];
-	u8 *pos;
-	u32 crc;
-	u8 *icv;
-	struct scatterlist sg;
-
-	if (skb_headroom(skb) < 4 || skb_tailroom(skb) < 4 ||
-	    skb->len < hdr_len)
-		return -1;
-
-	len = skb->len - hdr_len;
-	pos = skb_push(skb, 4);
-	memmove(pos, pos + 4, hdr_len);
-	pos += hdr_len;
-
-	klen = 3 + wep->key_len;
-
-	wep->iv++;
-
-	/* Fluhrer, Mantin, and Shamir have reported weaknesses in the key
-	 * scheduling algorithm of RC4. At least IVs (KeyByte + 3, 0xff, N)
-	 * can be used to speedup attacks, so avoid using them. */
-	if ((wep->iv & 0xff00) == 0xff00) {
-		u8 B = (wep->iv >> 16) & 0xff;
-		if (B >= 3 && B < klen)
-			wep->iv += 0x0100;
-	}
-
-	/* Prepend 24-bit IV to RC4 key and TX frame */
-	*pos++ = key[0] = (wep->iv >> 16) & 0xff;
-	*pos++ = key[1] = (wep->iv >> 8) & 0xff;
-	*pos++ = key[2] = wep->iv & 0xff;
-	*pos++ = wep->key_idx << 6;
-
-	/* Copy rest of the WEP key (the secret part) */
-	memcpy(key + 3, wep->key, wep->key_len);
-
-	/* Append little-endian CRC32 and encrypt it to produce ICV */
-	crc = ~crc32_le(~0, pos, len);
-	icv = skb_put(skb, 4);
-	icv[0] = crc;
-	icv[1] = crc >> 8;
-	icv[2] = crc >> 16;
-	icv[3] = crc >> 24;
-
-	crypto_blkcipher_setkey(wep->tx_tfm, key, klen);
-	sg_init_one(&sg, pos, len + 4);
-
-	return crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
-}
-
-/* Perform WEP decryption on given buffer. Buffer includes whole WEP part of
- * the frame: IV (4 bytes), encrypted payload (including SNAP header),
- * ICV (4 bytes). len includes both IV and ICV.
- *
- * Returns 0 if frame was decrypted successfully and ICV was correct and -1 on
- * failure. If frame is OK, IV and ICV will be removed.
- */
-static int prism2_wep_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-	struct blkcipher_desc desc = { .tfm = wep->rx_tfm };
-	u32 klen, plen;
-	u8 key[WEP_KEY_LEN + 3];
-	u8 keyidx, *pos;
-	u32 crc;
-	u8 icv[4];
-	struct scatterlist sg;
-
-	if (skb->len < hdr_len + 8)
-		return -1;
-
-	pos = skb->data + hdr_len;
-	key[0] = *pos++;
-	key[1] = *pos++;
-	key[2] = *pos++;
-	keyidx = *pos++ >> 6;
-	if (keyidx != wep->key_idx)
-		return -1;
-
-	klen = 3 + wep->key_len;
-
-	/* Copy rest of the WEP key (the secret part) */
-	memcpy(key + 3, wep->key, wep->key_len);
-
-	/* Apply RC4 to data and compute CRC32 over decrypted data */
-	plen = skb->len - hdr_len - 8;
-
-	crypto_blkcipher_setkey(wep->rx_tfm, key, klen);
-	sg_init_one(&sg, pos, plen + 4);
-
-	if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4))
-		return -7;
-
-	crc = ~crc32_le(~0, pos, plen);
-	icv[0] = crc;
-	icv[1] = crc >> 8;
-	icv[2] = crc >> 16;
-	icv[3] = crc >> 24;
-
-	if (memcmp(icv, pos + plen, 4) != 0) {
-		/* ICV mismatch - drop frame */
-		return -2;
-	}
-
-	/* Remove IV and ICV */
-	memmove(skb->data + 4, skb->data, hdr_len);
-	skb_pull(skb, 4);
-	skb_trim(skb, skb->len - 4);
-	return 0;
-}
-
-static int prism2_wep_set_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-
-	if (len < 0 || len > WEP_KEY_LEN)
-		return -1;
-
-	memcpy(wep->key, key, len);
-	wep->key_len = len;
-
-	return 0;
-}
-
-static int prism2_wep_get_key(void *key, int len, u8 *seq, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-
-	if (len < wep->key_len)
-		return -1;
-
-	memcpy(key, wep->key, wep->key_len);
-
-	return wep->key_len;
-}
-
-static char *prism2_wep_print_stats(char *p, void *priv)
-{
-	struct prism2_wep_data *wep = priv;
-	p += sprintf(p, "key[%d] alg=WEP len=%d\n",
-		     wep->key_idx, wep->key_len);
-	return p;
-}
-
-static struct ieee80211_crypto_ops ieee80211_crypt_wep = {
-	.name			= "WEP",
-	.init			= prism2_wep_init,
-	.deinit			= prism2_wep_deinit,
-	.encrypt_mpdu		= prism2_wep_encrypt,
-	.decrypt_mpdu		= prism2_wep_decrypt,
-	.encrypt_msdu		= NULL,
-	.decrypt_msdu		= NULL,
-	.set_key		= prism2_wep_set_key,
-	.get_key		= prism2_wep_get_key,
-	.print_stats		= prism2_wep_print_stats,
-	.extra_prefix_len	= 4, /* IV */
-	.extra_postfix_len	= 4, /* ICV */
-	.owner			= THIS_MODULE,
-};
-
-int ieee80211_crypto_wep_init(void)
-{
-	return ieee80211_register_crypto_ops(&ieee80211_crypt_wep);
-}
-
-void ieee80211_crypto_wep_exit(void)
-{
-	ieee80211_unregister_crypto_ops(&ieee80211_crypt_wep);
-}
-
-void ieee80211_wep_null(void)
-{
-	return;
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
deleted file mode 100644
index 07a1fbb6678e..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*******************************************************************************
-
-  Copyright(c) 2004 Intel Corporation. All rights reserved.
-
-  Portions of this file are based on the WEP enablement code provided by the
-  Host AP project hostap-drivers v0.1.3
-  Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
-  <jkmaline@cc.hut.fi>
-  Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc., 59
-  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-
-  The full GNU General Public License is included in this distribution in the
-  file called LICENSE.
-
-  Contact Information:
-  James P. Ketrenos <ipw2100-admin@linux.intel.com>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/compiler.h>
-//#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/in6.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/tcp.h>
-#include <linux/types.h>
-#include <linux/wireless.h>
-#include <linux/etherdevice.h>
-#include <linux/uaccess.h>
-#include <net/arp.h>
-#include <net/net_namespace.h>
-
-#include "ieee80211.h"
-
-MODULE_DESCRIPTION("802.11 data/management/control stack");
-MODULE_AUTHOR("Copyright (C) 2004 Intel Corporation <jketreno@linux.intel.com>");
-MODULE_LICENSE("GPL");
-
-#define DRV_NAME "ieee80211"
-
-static inline int ieee80211_networks_allocate(struct ieee80211_device *ieee)
-{
-	if (ieee->networks)
-		return 0;
-
-	ieee->networks = kcalloc(
-		MAX_NETWORK_COUNT, sizeof(struct ieee80211_network),
-		GFP_KERNEL);
-	if (!ieee->networks)
-		return -ENOMEM;
-
-	return 0;
-}
-
-static inline void ieee80211_networks_free(struct ieee80211_device *ieee)
-{
-	if (!ieee->networks)
-		return;
-	kfree(ieee->networks);
-	ieee->networks = NULL;
-}
-
-static inline void ieee80211_networks_initialize(struct ieee80211_device *ieee)
-{
-	int i;
-
-	INIT_LIST_HEAD(&ieee->network_free_list);
-	INIT_LIST_HEAD(&ieee->network_list);
-	for (i = 0; i < MAX_NETWORK_COUNT; i++)
-		list_add_tail(&ieee->networks[i].list, &ieee->network_free_list);
-}
-
-
-struct net_device *alloc_ieee80211(int sizeof_priv)
-{
-	struct ieee80211_device *ieee;
-	struct net_device *dev;
-	int i, err;
-
-	IEEE80211_DEBUG_INFO("Initializing...\n");
-
-	dev = alloc_etherdev(sizeof(struct ieee80211_device) + sizeof_priv);
-	if (!dev) {
-		IEEE80211_ERROR("Unable to network device.\n");
-		goto failed;
-	}
-	ieee = netdev_priv(dev);
-
-	ieee->dev = dev;
-
-	err = ieee80211_networks_allocate(ieee);
-	if (err) {
-		IEEE80211_ERROR("Unable to allocate beacon storage: %d\n",
-				err);
-		goto failed;
-	}
-	ieee80211_networks_initialize(ieee);
-
-	/* Default fragmentation threshold is maximum payload size */
-	ieee->fts = DEFAULT_FTS;
-	ieee->scan_age = DEFAULT_MAX_SCAN_AGE;
-	ieee->open_wep = 1;
-
-	/* Default to enabling full open WEP with host based encrypt/decrypt */
-	ieee->host_encrypt = 1;
-	ieee->host_decrypt = 1;
-	ieee->ieee802_1x = 1; /* Default to supporting 802.1x */
-
-	INIT_LIST_HEAD(&ieee->crypt_deinit_list);
-	init_timer(&ieee->crypt_deinit_timer);
-	ieee->crypt_deinit_timer.data = (unsigned long)ieee;
-	ieee->crypt_deinit_timer.function = ieee80211_crypt_deinit_handler;
-
-	spin_lock_init(&ieee->lock);
-	spin_lock_init(&ieee->wpax_suitlist_lock);
-
-	ieee->wpax_type_set = 0;
-	ieee->wpa_enabled = 0;
-	ieee->tkip_countermeasures = 0;
-	ieee->drop_unencrypted = 0;
-	ieee->privacy_invoked = 0;
-	ieee->ieee802_1x = 1;
-	ieee->raw_tx = 0;
-
-	ieee80211_softmac_init(ieee);
-
-	for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++)
-		INIT_LIST_HEAD(&ieee->ibss_mac_hash[i]);
-
-	for (i = 0; i < 17; i++) {
-		ieee->last_rxseq_num[i] = -1;
-		ieee->last_rxfrag_num[i] = -1;
-		ieee->last_packet_time[i] = 0;
-	}
-//These function were added to load crypte module autoly
-	ieee80211_tkip_null();
-	ieee80211_wep_null();
-	ieee80211_ccmp_null();
-	return dev;
-
- failed:
-	if (dev)
-		free_netdev(dev);
-	return NULL;
-}
-
-
-void free_ieee80211(struct net_device *dev)
-{
-	struct ieee80211_device *ieee = netdev_priv(dev);
-
-	int i;
-	struct list_head *p, *q;
-
-
-	ieee80211_softmac_free(ieee);
-	del_timer_sync(&ieee->crypt_deinit_timer);
-	ieee80211_crypt_deinit_entries(ieee, 1);
-
-	for (i = 0; i < WEP_KEYS; i++) {
-		struct ieee80211_crypt_data *crypt = ieee->crypt[i];
-		if (crypt) {
-			if (crypt->ops)
-				crypt->ops->deinit(crypt->priv);
-			kfree(crypt);
-			ieee->crypt[i] = NULL;
-		}
-	}
-
-	ieee80211_networks_free(ieee);
-
-	for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++) {
-		list_for_each_safe(p, q, &ieee->ibss_mac_hash[i]) {
-			kfree(list_entry(p, struct ieee_ibss_seq, list));
-			list_del(p);
-		}
-	}
-
-
-	free_netdev(dev);
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
deleted file mode 100644
index b522b57a2691..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_rx.c
+++ /dev/null
@@ -1,1486 +0,0 @@
-/*
- * Original code based Host AP (software wireless LAN access point) driver
- * for Intersil Prism2/2.5/3 - hostap.o module, common routines
- *
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- * Copyright (c) 2004, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation. See README and COPYING for
- * more details.
- ******************************************************************************
-
-  Few modifications for Realtek's Wi-Fi drivers by
-  Andrea Merello <andrea.merello@gmail.com>
-
-  A special thanks goes to Realtek for their support !
-
-******************************************************************************/
-
-
-#include <linux/compiler.h>
-//#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/in6.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/tcp.h>
-#include <linux/types.h>
-#include <linux/wireless.h>
-#include <linux/etherdevice.h>
-#include <linux/uaccess.h>
-#include <linux/ctype.h>
-
-#include "ieee80211.h"
-#include "dot11d.h"
-static inline void ieee80211_monitor_rx(struct ieee80211_device *ieee,
-					struct sk_buff *skb,
-					struct ieee80211_rx_stats *rx_stats)
-{
-	struct ieee80211_hdr_4addr *hdr =
-		(struct ieee80211_hdr_4addr *)skb->data;
-	u16 fc = le16_to_cpu(hdr->frame_ctl);
-
-	skb->dev = ieee->dev;
-	skb_reset_mac_header(skb);
-	skb_pull(skb, ieee80211_get_hdrlen(fc));
-	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = __constant_htons(ETH_P_80211_RAW);
-	memset(skb->cb, 0, sizeof(skb->cb));
-	netif_rx(skb);
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static struct ieee80211_frag_entry *
-ieee80211_frag_cache_find(struct ieee80211_device *ieee, unsigned int seq,
-			  unsigned int frag, u8 tid, u8 *src, u8 *dst)
-{
-	struct ieee80211_frag_entry *entry;
-	int i;
-
-	for (i = 0; i < IEEE80211_FRAG_CACHE_LEN; i++) {
-		entry = &ieee->frag_cache[tid][i];
-		if (entry->skb != NULL &&
-		    time_after(jiffies, entry->first_frag_time + 2 * HZ)) {
-			IEEE80211_DEBUG_FRAG(
-				"expiring fragment cache entry "
-				"seq=%u last_frag=%u\n",
-				entry->seq, entry->last_frag);
-			dev_kfree_skb_any(entry->skb);
-			entry->skb = NULL;
-		}
-
-		if (entry->skb != NULL && entry->seq == seq &&
-		    (entry->last_frag + 1 == frag || frag == -1) &&
-		    memcmp(entry->src_addr, src, ETH_ALEN) == 0 &&
-		    memcmp(entry->dst_addr, dst, ETH_ALEN) == 0)
-			return entry;
-	}
-
-	return NULL;
-}
-
-/* Called only as a tasklet (software IRQ) */
-static struct sk_buff *
-ieee80211_frag_cache_get(struct ieee80211_device *ieee,
-			 struct ieee80211_hdr_4addr *hdr)
-{
-	struct sk_buff *skb = NULL;
-	u16 fc = le16_to_cpu(hdr->frame_ctl);
-	u16 sc = le16_to_cpu(hdr->seq_ctl);
-	unsigned int frag = WLAN_GET_SEQ_FRAG(sc);
-	unsigned int seq = WLAN_GET_SEQ_SEQ(sc);
-	struct ieee80211_frag_entry *entry;
-	struct ieee80211_hdr_3addrqos *hdr_3addrqos;
-	struct ieee80211_hdr_4addrqos *hdr_4addrqos;
-	u8 tid;
-
-	if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
-		tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else if (IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
-		tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else {
-		tid = 0;
-	}
-
-	if (frag == 0) {
-		/* Reserve enough space to fit maximum frame length */
-		skb = dev_alloc_skb(ieee->dev->mtu +
-				    sizeof(struct ieee80211_hdr_4addr) +
-				    8 /* LLC */ +
-				    2 /* alignment */ +
-				    8 /* WEP */ +
-				    ETH_ALEN /* WDS */ +
-				    (IEEE80211_QOS_HAS_SEQ(fc) ? 2 : 0) /* QOS Control */);
-		if (skb == NULL)
-			return NULL;
-
-		entry = &ieee->frag_cache[tid][ieee->frag_next_idx[tid]];
-		ieee->frag_next_idx[tid]++;
-		if (ieee->frag_next_idx[tid] >= IEEE80211_FRAG_CACHE_LEN)
-			ieee->frag_next_idx[tid] = 0;
-
-		if (entry->skb != NULL)
-			dev_kfree_skb_any(entry->skb);
-
-		entry->first_frag_time = jiffies;
-		entry->seq = seq;
-		entry->last_frag = frag;
-		entry->skb = skb;
-		memcpy(entry->src_addr, hdr->addr2, ETH_ALEN);
-		memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN);
-	} else {
-		/* received a fragment of a frame for which the head fragment
-		 * should have already been received */
-		entry = ieee80211_frag_cache_find(ieee, seq, frag, tid, hdr->addr2,
-						  hdr->addr1);
-		if (entry != NULL) {
-			entry->last_frag = frag;
-			skb = entry->skb;
-		}
-	}
-
-	return skb;
-}
-
-
-/* Called only as a tasklet (software IRQ) */
-static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
-					   struct ieee80211_hdr_4addr *hdr)
-{
-	u16 fc = le16_to_cpu(hdr->frame_ctl);
-	u16 sc = le16_to_cpu(hdr->seq_ctl);
-	unsigned int seq = WLAN_GET_SEQ_SEQ(sc);
-	struct ieee80211_frag_entry *entry;
-	struct ieee80211_hdr_3addrqos *hdr_3addrqos;
-	struct ieee80211_hdr_4addrqos *hdr_4addrqos;
-	u8 tid;
-
-	if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)hdr;
-		tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else if (IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)hdr;
-		tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else {
-		tid = 0;
-	}
-
-	entry = ieee80211_frag_cache_find(ieee, seq, -1, tid, hdr->addr2,
-					  hdr->addr1);
-
-	if (entry == NULL) {
-		IEEE80211_DEBUG_FRAG(
-			"could not invalidate fragment cache "
-			"entry (seq=%u)\n", seq);
-		return -1;
-	}
-
-	entry->skb = NULL;
-	return 0;
-}
-
-
-
-/* ieee80211_rx_frame_mgtmt
- *
- * Responsible for handling management control frames
- *
- * Called by ieee80211_rx */
-static inline int
-ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
-			struct ieee80211_rx_stats *rx_stats, u16 type,
-			u16 stype)
-{
-	struct ieee80211_hdr_4addr *hdr;
-
-	// cheat the the hdr type
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	/* On the struct stats definition there is written that
-	 * this is not mandatory.... but seems that the probe
-	 * response parser uses it
-	 */
-	rx_stats->len = skb->len;
-	ieee80211_rx_mgt(ieee, (struct ieee80211_hdr_4addr *)skb->data,
-			 rx_stats);
-
-	if ((ieee->state == IEEE80211_LINKED) && (memcmp(hdr->addr3, ieee->current_network.bssid, ETH_ALEN))) {
-		dev_kfree_skb_any(skb);
-		return 0;
-	}
-
-	ieee80211_rx_frame_softmac(ieee, skb, rx_stats, type, stype);
-
-	dev_kfree_skb_any(skb);
-
-	return 0;
-
-}
-
-
-
-/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
-/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-static unsigned char rfc1042_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
-/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-static unsigned char bridge_tunnel_header[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
-/* No encapsulation header if EtherType < 0x600 (=length) */
-
-/* Called by ieee80211_rx_frame_decrypt */
-static int ieee80211_is_eapol_frame(struct ieee80211_device *ieee,
-				    struct sk_buff *skb, size_t hdrlen)
-{
-	struct net_device *dev = ieee->dev;
-	u16 fc, ethertype;
-	struct ieee80211_hdr_4addr *hdr;
-	u8 *pos;
-
-	if (skb->len < 24)
-		return 0;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	fc = le16_to_cpu(hdr->frame_ctl);
-
-	/* check that the frame is unicast frame to us */
-	if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-	    IEEE80211_FCTL_TODS &&
-	    memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0 &&
-	    memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) {
-		/* ToDS frame with own addr BSSID and DA */
-	} else if ((fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
-		   IEEE80211_FCTL_FROMDS &&
-		   memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN) == 0) {
-		/* FromDS frame with own addr as DA */
-	} else
-		return 0;
-
-	if (skb->len < 24 + 8)
-		return 0;
-
-	/* check for port access entity Ethernet type */
-//	pos = skb->data + 24;
-	pos = skb->data + hdrlen;
-	ethertype = (pos[6] << 8) | pos[7];
-	if (ethertype == ETH_P_PAE)
-		return 1;
-
-	return 0;
-}
-
-/* Called only as a tasklet (software IRQ), by ieee80211_rx */
-static inline int
-ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb,
-			   struct ieee80211_crypt_data *crypt)
-{
-	struct ieee80211_hdr_4addr *hdr;
-	int res, hdrlen;
-
-	if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
-		return 0;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
-
-#ifdef CONFIG_IEEE80211_CRYPT_TKIP
-	if (ieee->tkip_countermeasures &&
-	    strcmp(crypt->ops->name, "TKIP") == 0) {
-		if (net_ratelimit()) {
-			netdev_dbg(ieee->dev,
-				   "TKIP countermeasures: dropped received packet from %pM\n",
-				   ieee->dev->name, hdr->addr2);
-		}
-		return -1;
-	}
-#endif
-
-	atomic_inc(&crypt->refcnt);
-	res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
-	atomic_dec(&crypt->refcnt);
-	if (res < 0) {
-		IEEE80211_DEBUG_DROP(
-			"decryption failed (SA=%pM"
-			") res=%d\n", hdr->addr2, res);
-		if (res == -2)
-			IEEE80211_DEBUG_DROP("Decryption failed ICV "
-					     "mismatch (key %d)\n",
-					     skb->data[hdrlen + 3] >> 6);
-		ieee->ieee_stats.rx_discards_undecryptable++;
-		return -1;
-	}
-
-	return res;
-}
-
-
-/* Called only as a tasklet (software IRQ), by ieee80211_rx */
-static inline int
-ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee,
-				struct sk_buff *skb, int keyidx,
-				struct ieee80211_crypt_data *crypt)
-{
-	struct ieee80211_hdr_4addr *hdr;
-	int res, hdrlen;
-
-	if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
-		return 0;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	hdrlen = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
-
-	atomic_inc(&crypt->refcnt);
-	res = crypt->ops->decrypt_msdu(skb, keyidx, hdrlen, crypt->priv);
-	atomic_dec(&crypt->refcnt);
-	if (res < 0) {
-		netdev_dbg(ieee->dev,
-			   "MSDU decryption/MIC verification failed (SA=%pM keyidx=%d)\n",
-			   hdr->addr2, keyidx);
-		return -1;
-	}
-
-	return 0;
-}
-
-
-/* this function is stolen from ipw2200 driver*/
-#define IEEE_PACKET_RETRY_TIME (5*HZ)
-static int is_duplicate_packet(struct ieee80211_device *ieee,
-			       struct ieee80211_hdr_4addr *header)
-{
-	u16 fc = le16_to_cpu(header->frame_ctl);
-	u16 sc = le16_to_cpu(header->seq_ctl);
-	u16 seq = WLAN_GET_SEQ_SEQ(sc);
-	u16 frag = WLAN_GET_SEQ_FRAG(sc);
-	u16 *last_seq, *last_frag;
-	unsigned long *last_time;
-	struct ieee80211_hdr_3addrqos *hdr_3addrqos;
-	struct ieee80211_hdr_4addrqos *hdr_4addrqos;
-	u8 tid;
-
-	//TO2DS and QoS
-	if (((fc & IEEE80211_FCTL_DSTODS) == IEEE80211_FCTL_DSTODS) && IEEE80211_QOS_HAS_SEQ(fc)) {
-		hdr_4addrqos = (struct ieee80211_hdr_4addrqos *)header;
-		tid = le16_to_cpu(hdr_4addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else if (IEEE80211_QOS_HAS_SEQ(fc)) { //QoS
-		hdr_3addrqos = (struct ieee80211_hdr_3addrqos *)header;
-		tid = le16_to_cpu(hdr_3addrqos->qos_ctl) & IEEE80211_QOS_TID;
-		tid = UP2AC(tid);
-		tid++;
-	} else { // no QoS
-		tid = 0;
-	}
-	switch (ieee->iw_mode) {
-	case IW_MODE_ADHOC:
-	{
-		struct list_head *p;
-		struct ieee_ibss_seq *entry = NULL;
-		u8 *mac = header->addr2;
-		int index = mac[5] % IEEE_IBSS_MAC_HASH_SIZE;
-
-		list_for_each(p, &ieee->ibss_mac_hash[index]) {
-			entry = list_entry(p, struct ieee_ibss_seq, list);
-			if (!memcmp(entry->mac, mac, ETH_ALEN))
-				break;
-		}
-	//	if (memcmp(entry->mac, mac, ETH_ALEN)){
-		if (p == &ieee->ibss_mac_hash[index]) {
-			entry = kmalloc(sizeof(struct ieee_ibss_seq), GFP_ATOMIC);
-			if (!entry)
-				return 0;
-
-			memcpy(entry->mac, mac, ETH_ALEN);
-			entry->seq_num[tid] = seq;
-			entry->frag_num[tid] = frag;
-			entry->packet_time[tid] = jiffies;
-			list_add(&entry->list, &ieee->ibss_mac_hash[index]);
-			return 0;
-		}
-		last_seq = &entry->seq_num[tid];
-		last_frag = &entry->frag_num[tid];
-		last_time = &entry->packet_time[tid];
-		break;
-	}
-
-	case IW_MODE_INFRA:
-		last_seq = &ieee->last_rxseq_num[tid];
-		last_frag = &ieee->last_rxfrag_num[tid];
-		last_time = &ieee->last_packet_time[tid];
-
-		break;
-	default:
-		return 0;
-	}
-
-//	if(tid != 0) {
-//		printk(KERN_WARNING ":)))))))))))%x %x %x, fc(%x)\n", tid, *last_seq, seq, header->frame_ctl);
-//	}
-	if ((*last_seq == seq) &&
-	    time_after(*last_time + IEEE_PACKET_RETRY_TIME, jiffies)) {
-		if (*last_frag == frag) {
-			//printk(KERN_WARNING "[1] go drop!\n");
-			goto drop;
-
-		}
-		if (*last_frag + 1 != frag)
-			/* out-of-order fragment */
-			//printk(KERN_WARNING "[2] go drop!\n");
-			goto drop;
-	} else
-		*last_seq = seq;
-
-	*last_frag = frag;
-	*last_time = jiffies;
-	return 0;
-
-drop:
-//	BUG_ON(!(fc & IEEE80211_FCTL_RETRY));
-//	printk("DUP\n");
-
-	return 1;
-}
-
-
-/* All received frames are sent to this function. @skb contains the frame in
- * IEEE 802.11 format, i.e., in the format it was sent over air.
- * This function is called only as a tasklet (software IRQ). */
-int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
-		     struct ieee80211_rx_stats *rx_stats)
-{
-	struct net_device *dev = ieee->dev;
-	//struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct ieee80211_hdr_4addr *hdr;
-
-	size_t hdrlen;
-	u16 fc, type, stype, sc;
-	struct net_device_stats *stats;
-	unsigned int frag;
-	u8 *payload;
-	u16 ethertype;
-	u8 dst[ETH_ALEN];
-	u8 src[ETH_ALEN];
-	u8 bssid[ETH_ALEN];
-	struct ieee80211_crypt_data *crypt = NULL;
-	int keyidx = 0;
-
-	// cheat the the hdr type
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	stats = &ieee->stats;
-
-	if (skb->len < 10) {
-		netdev_info(ieee->dev, "SKB length < 10\n");
-		goto rx_dropped;
-	}
-
-	fc = le16_to_cpu(hdr->frame_ctl);
-	type = WLAN_FC_GET_TYPE(fc);
-	stype = WLAN_FC_GET_STYPE(fc);
-	sc = le16_to_cpu(hdr->seq_ctl);
-
-	frag = WLAN_GET_SEQ_FRAG(sc);
-
-//YJ,add,080828,for keep alive
-	if ((fc & IEEE80211_FCTL_TODS) != IEEE80211_FCTL_TODS) {
-		if (!memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN))
-			ieee->NumRxUnicast++;
-	} else {
-		if (!memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN))
-			ieee->NumRxUnicast++;
-	}
-//YJ,add,080828,for keep alive,end
-
-	hdrlen = ieee80211_get_hdrlen(fc);
-
-
-	if (ieee->iw_mode == IW_MODE_MONITOR) {
-		ieee80211_monitor_rx(ieee, skb, rx_stats);
-		stats->rx_packets++;
-		stats->rx_bytes += skb->len;
-		return 1;
-	}
-
-	if (ieee->host_decrypt) {
-		int idx = 0;
-		if (skb->len >= hdrlen + 3)
-			idx = skb->data[hdrlen + 3] >> 6;
-		crypt = ieee->crypt[idx];
-
-		/* allow NULL decrypt to indicate an station specific override
-		 * for default encryption */
-		if (crypt && (crypt->ops == NULL ||
-			      crypt->ops->decrypt_mpdu == NULL))
-			crypt = NULL;
-
-		if (!crypt && (fc & IEEE80211_FCTL_WEP)) {
-			/* This seems to be triggered by some (multicast?)
-			 * frames from other than current BSS, so just drop the
-			 * frames silently instead of filling system log with
-			 * these reports. */
-			IEEE80211_DEBUG_DROP("Decryption failed (not set)"
-					     " (SA=%pM)\n",
-					     hdr->addr2);
-			ieee->ieee_stats.rx_discards_undecryptable++;
-			goto rx_dropped;
-		}
-	}
-
-	if (skb->len < IEEE80211_DATA_HDR3_LEN)
-		goto rx_dropped;
-
-	// if QoS enabled, should check the sequence for each of the AC
-	if (is_duplicate_packet(ieee, hdr))
-		goto rx_dropped;
-
-
-	if (type == IEEE80211_FTYPE_MGMT) {
-		if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
-			goto rx_dropped;
-		else
-			goto rx_exit;
-	}
-
-	/* Data frame - extract src/dst addresses */
-	switch (fc & (IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
-	case IEEE80211_FCTL_FROMDS:
-		memcpy(dst, hdr->addr1, ETH_ALEN);
-		memcpy(src, hdr->addr3, ETH_ALEN);
-		memcpy(bssid, hdr->addr2, ETH_ALEN);
-		break;
-	case IEEE80211_FCTL_TODS:
-		memcpy(dst, hdr->addr3, ETH_ALEN);
-		memcpy(src, hdr->addr2, ETH_ALEN);
-		memcpy(bssid, hdr->addr1, ETH_ALEN);
-		break;
-	case IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS:
-		if (skb->len < IEEE80211_DATA_HDR4_LEN)
-			goto rx_dropped;
-		memcpy(dst, hdr->addr3, ETH_ALEN);
-		memcpy(src, hdr->addr4, ETH_ALEN);
-		memcpy(bssid, ieee->current_network.bssid, ETH_ALEN);
-		break;
-	case 0:
-		memcpy(dst, hdr->addr1, ETH_ALEN);
-		memcpy(src, hdr->addr2, ETH_ALEN);
-		memcpy(bssid, hdr->addr3, ETH_ALEN);
-		break;
-	}
-
-
-	dev->last_rx = jiffies;
-
-
-	/* Nullfunc frames may have PS-bit set, so they must be passed to
-	 * hostap_handle_sta_rx() before being dropped here. */
-	if (stype != IEEE80211_STYPE_DATA &&
-	    stype != IEEE80211_STYPE_DATA_CFACK &&
-	    stype != IEEE80211_STYPE_DATA_CFPOLL &&
-	    stype != IEEE80211_STYPE_DATA_CFACKPOLL &&
-	    stype != IEEE80211_STYPE_QOS_DATA//add by David,2006.8.4
-	    ) {
-		if (stype != IEEE80211_STYPE_NULLFUNC)
-			IEEE80211_DEBUG_DROP(
-				"RX: dropped data frame "
-				"with no data (type=0x%02x, "
-				"subtype=0x%02x, len=%d)\n",
-				type, stype, skb->len);
-		goto rx_dropped;
-	}
-	if (memcmp(bssid, ieee->current_network.bssid, ETH_ALEN))
-		goto rx_dropped;
-
-	ieee->NumRxDataInPeriod++;
-	ieee->NumRxOkTotal++;
-	/* skb: hdr + (possibly fragmented, possibly encrypted) payload */
-
-	if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
-	    (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
-		goto rx_dropped;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-
-	/* skb: hdr + (possibly fragmented) plaintext payload */
-	// PR: FIXME: hostap has additional conditions in the "if" below:
-	// ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
-	if ((frag != 0 || (fc & IEEE80211_FCTL_MOREFRAGS))) {
-		int flen;
-		struct sk_buff *frag_skb = ieee80211_frag_cache_get(ieee, hdr);
-		IEEE80211_DEBUG_FRAG("Rx Fragment received (%u)\n", frag);
-
-		if (!frag_skb) {
-			IEEE80211_DEBUG(IEEE80211_DL_RX | IEEE80211_DL_FRAG,
-					"Rx cannot get skb from fragment "
-					"cache (morefrag=%d seq=%u frag=%u)\n",
-					(fc & IEEE80211_FCTL_MOREFRAGS) != 0,
-					WLAN_GET_SEQ_SEQ(sc), frag);
-			goto rx_dropped;
-		}
-		flen = skb->len;
-		if (frag != 0)
-			flen -= hdrlen;
-
-		if (frag_skb->tail + flen > frag_skb->end) {
-			netdev_warn(ieee->dev,
-				    "host decrypted and reassembled frame did not fit skb\n");
-			ieee80211_frag_cache_invalidate(ieee, hdr);
-			goto rx_dropped;
-		}
-
-		if (frag == 0) {
-			/* copy first fragment (including full headers) into
-			 * beginning of the fragment cache skb */
-			memcpy(skb_put(frag_skb, flen), skb->data, flen);
-		} else {
-			/* append frame payload to the end of the fragment
-			 * cache skb */
-			memcpy(skb_put(frag_skb, flen), skb->data + hdrlen,
-			       flen);
-		}
-		dev_kfree_skb_any(skb);
-		skb = NULL;
-
-		if (fc & IEEE80211_FCTL_MOREFRAGS) {
-			/* more fragments expected - leave the skb in fragment
-			 * cache for now; it will be delivered to upper layers
-			 * after all fragments have been received */
-			goto rx_exit;
-		}
-
-		/* this was the last fragment and the frame will be
-		 * delivered, so remove skb from fragment cache */
-		skb = frag_skb;
-		hdr = (struct ieee80211_hdr_4addr *)skb->data;
-		ieee80211_frag_cache_invalidate(ieee, hdr);
-	}
-
-	/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
-	 * encrypted/authenticated */
-	if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
-	    ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
-		goto rx_dropped;
-
-	hdr = (struct ieee80211_hdr_4addr *)skb->data;
-	if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep) {
-		if (/*ieee->ieee802_1x &&*/
-		    ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
-
-#ifdef CONFIG_IEEE80211_DEBUG
-			/* pass unencrypted EAPOL frames even if encryption is
-			 * configured */
-			struct eapol *eap = (struct eapol *)(skb->data +
-				24);
-			IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
-						eap_get_type(eap->type));
-#endif
-		} else {
-			IEEE80211_DEBUG_DROP(
-				"encryption configured, but RX "
-				"frame not encrypted (SA=%pM)\n",
-				hdr->addr2);
-			goto rx_dropped;
-		}
-	}
-
-#ifdef CONFIG_IEEE80211_DEBUG
-	if (crypt && !(fc & IEEE80211_FCTL_WEP) &&
-	    ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
-			struct eapol *eap = (struct eapol *)(skb->data +
-				24);
-			IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
-						eap_get_type(eap->type));
-	}
-#endif
-
-	if (crypt && !(fc & IEEE80211_FCTL_WEP) && !ieee->open_wep &&
-	    !ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
-		IEEE80211_DEBUG_DROP(
-			"dropped unencrypted RX data "
-			"frame from %pM"
-			" (drop_unencrypted=1)\n",
-			hdr->addr2);
-		goto rx_dropped;
-	}
-/*
-	if(ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
-		printk(KERN_WARNING "RX: IEEE802.1X EPAOL frame!\n");
-	}
-*/
-	/* skb: hdr + (possible reassembled) full plaintext payload */
-	payload = skb->data + hdrlen;
-	ethertype = (payload[6] << 8) | payload[7];
-
-
-	/* convert hdr + possible LLC headers into Ethernet header */
-	if (skb->len - hdrlen >= 8 &&
-	    ((memcmp(payload, rfc1042_header, SNAP_SIZE) == 0 &&
-	      ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
-	     memcmp(payload, bridge_tunnel_header, SNAP_SIZE) == 0)) {
-		/* remove RFC1042 or Bridge-Tunnel encapsulation and
-		 * replace EtherType */
-		skb_pull(skb, hdrlen + SNAP_SIZE);
-		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
-		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
-	} else {
-		u16 len;
-		/* Leave Ethernet header part of hdr and full payload */
-		skb_pull(skb, hdrlen);
-		len = htons(skb->len);
-		memcpy(skb_push(skb, 2), &len, 2);
-		memcpy(skb_push(skb, ETH_ALEN), src, ETH_ALEN);
-		memcpy(skb_push(skb, ETH_ALEN), dst, ETH_ALEN);
-	}
-
-
-	stats->rx_packets++;
-	stats->rx_bytes += skb->len;
-
-	if (skb) {
-		skb->protocol = eth_type_trans(skb, dev);
-		memset(skb->cb, 0, sizeof(skb->cb));
-		skb->dev = dev;
-		skb->ip_summed = CHECKSUM_NONE; /* 802.11 crc not sufficient */
-		ieee->last_rx_ps_time = jiffies;
-		netif_rx(skb);
-	}
-
- rx_exit:
-	return 1;
-
- rx_dropped:
-	stats->rx_dropped++;
-
-	/* Returning 0 indicates to caller that we have not handled the SKB--
-	 * so it is still allocated and can be used again by underlying
-	 * hardware as a DMA target */
-	return 0;
-}
-
-#define MGMT_FRAME_FIXED_PART_LENGTH		0x24
-
-static inline int ieee80211_is_ofdm_rate(u8 rate)
-{
-	switch (rate & ~IEEE80211_BASIC_RATE_MASK) {
-	case IEEE80211_OFDM_RATE_6MB:
-	case IEEE80211_OFDM_RATE_9MB:
-	case IEEE80211_OFDM_RATE_12MB:
-	case IEEE80211_OFDM_RATE_18MB:
-	case IEEE80211_OFDM_RATE_24MB:
-	case IEEE80211_OFDM_RATE_36MB:
-	case IEEE80211_OFDM_RATE_48MB:
-	case IEEE80211_OFDM_RATE_54MB:
-		return 1;
-	}
-	return 0;
-}
-
-static inline int ieee80211_SignalStrengthTranslate(int CurrSS)
-{
-	int RetSS;
-
-	// Step 1. Scale mapping.
-	if (CurrSS >= 71 && CurrSS <= 100)
-		RetSS = 90 + ((CurrSS - 70) / 3);
-	else if (CurrSS >= 41 && CurrSS <= 70)
-		RetSS = 78 + ((CurrSS - 40) / 3);
-	else if (CurrSS >= 31 && CurrSS <= 40)
-		RetSS = 66 + (CurrSS - 30);
-	else if (CurrSS >= 21 && CurrSS <= 30)
-		RetSS = 54 + (CurrSS - 20);
-	else if (CurrSS >= 5 && CurrSS <= 20)
-		RetSS = 42 + (((CurrSS - 5) * 2) / 3);
-	else if (CurrSS == 4)
-		RetSS = 36;
-	else if (CurrSS == 3)
-		RetSS = 27;
-	else if (CurrSS == 2)
-		RetSS = 18;
-	else if (CurrSS == 1)
-		RetSS = 9;
-	else
-		RetSS = CurrSS;
-
-	//RT_TRACE(COMP_DBG, DBG_LOUD, ("##### After Mapping:  LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
-
-	// Step 2. Smoothing.
-
-	//RT_TRACE(COMP_DBG, DBG_LOUD, ("$$$$$ After Smoothing:  LastSS: %d, CurrSS: %d, RetSS: %d\n", LastSS, CurrSS, RetSS));
-
-	return RetSS;
-}
-
-static inline void
-ieee80211_extract_country_ie(struct ieee80211_device *ieee,
-			     struct ieee80211_info_element *info_element,
-			     struct ieee80211_network *network, u8 *addr2)
-{
-	if (IS_DOT11D_ENABLE(ieee)) {
-		if (info_element->len != 0) {
-			memcpy(network->CountryIeBuf, info_element->data, info_element->len);
-			network->CountryIeLen = info_element->len;
-
-			if (!IS_COUNTRY_IE_VALID(ieee))
-				Dot11d_UpdateCountryIe(ieee, addr2, info_element->len, info_element->data);
-		}
-
-		//
-		// 070305, rcnjko: I update country IE watch dog here because
-		// some AP (e.g. Cisco 1242) don't include country IE in their
-		// probe response frame.
-		//
-		if (IS_EQUAL_CIE_SRC(ieee, addr2))
-			UPDATE_CIE_WATCHDOG(ieee);
-	}
-
-}
-
-/* SignalStrengthIndex is 0-100 */
-static int ieee80211_TranslateToDbm(unsigned char SignalStrengthIndex)
-{
-	unsigned char SignalPower; // in dBm.
-
-	// Translate to dBm (x=0.5y-95).
-	SignalPower = (int)SignalStrengthIndex * 7 / 10;
-	SignalPower -= 95;
-
-	return SignalPower;
-}
-inline int ieee80211_network_init(
-	struct ieee80211_device *ieee,
-	struct ieee80211_probe_response *beacon,
-	struct ieee80211_network *network,
-	struct ieee80211_rx_stats *stats)
-{
-#ifdef CONFIG_IEEE80211_DEBUG
-	char rates_str[64];
-	char *p;
-#endif
-	struct ieee80211_info_element *info_element;
-	u16 left;
-	u8 i;
-	short offset;
-	u8 curRate = 0, hOpRate = 0, curRate_ex = 0;
-
-	/* Pull out fixed field data */
-	memcpy(network->bssid, beacon->header.addr3, ETH_ALEN);
-	network->capability = beacon->capability;
-	network->last_scanned = jiffies;
-	network->time_stamp[0] = beacon->time_stamp[0];
-	network->time_stamp[1] = beacon->time_stamp[1];
-	network->beacon_interval = beacon->beacon_interval;
-	/* Where to pull this? beacon->listen_interval;*/
-	network->listen_interval = 0x0A;
-	network->rates_len = network->rates_ex_len = 0;
-	network->last_associate = 0;
-	network->ssid_len = 0;
-	network->flags = 0;
-	network->atim_window = 0;
-	network->QoS_Enable = 0;
-//by amy 080312
-	network->HighestOperaRate = 0;
-//by amy 080312
-	network->Turbo_Enable = 0;
-	network->CountryIeLen = 0;
-	memset(network->CountryIeBuf, 0, MAX_IE_LEN);
-
-	if (stats->freq == IEEE80211_52GHZ_BAND) {
-		/* for A band (No DS info) */
-		network->channel = stats->received_channel;
-	} else
-		network->flags |= NETWORK_HAS_CCK;
-
-	network->wpa_ie_len = 0;
-	network->rsn_ie_len = 0;
-
-	info_element = &beacon->info_element;
-	left = stats->len - ((void *)info_element - (void *)beacon);
-	while (left >= sizeof(struct ieee80211_info_element_hdr)) {
-		if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
-			IEEE80211_DEBUG_SCAN("SCAN: parse failed: info_element->len + 2 > left : info_element->len+2=%d left=%d.\n",
-					     info_element->len + sizeof(struct ieee80211_info_element),
-					     left);
-			return 1;
-		}
-
-		switch (info_element->id) {
-		case MFIE_TYPE_SSID:
-			if (ieee80211_is_empty_essid(info_element->data,
-						     info_element->len)) {
-				network->flags |= NETWORK_EMPTY_ESSID;
-				break;
-			}
-
-			network->ssid_len = min(info_element->len,
-						(u8)IW_ESSID_MAX_SIZE);
-			memcpy(network->ssid, info_element->data, network->ssid_len);
-			if (network->ssid_len < IW_ESSID_MAX_SIZE)
-				memset(network->ssid + network->ssid_len, 0,
-				       IW_ESSID_MAX_SIZE - network->ssid_len);
-
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_SSID: '%s' len=%d.\n",
-					     network->ssid, network->ssid_len);
-			break;
-
-		case MFIE_TYPE_RATES:
-#ifdef CONFIG_IEEE80211_DEBUG
-			p = rates_str;
-#endif
-			network->rates_len = min(info_element->len, MAX_RATES_LENGTH);
-			for (i = 0; i < network->rates_len; i++) {
-				network->rates[i] = info_element->data[i];
-				curRate = network->rates[i] & 0x7f;
-				if (hOpRate < curRate)
-					hOpRate = curRate;
-#ifdef CONFIG_IEEE80211_DEBUG
-				p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
-#endif
-				if (ieee80211_is_ofdm_rate(info_element->data[i])) {
-					network->flags |= NETWORK_HAS_OFDM;
-					if (info_element->data[i] &
-					    IEEE80211_BASIC_RATE_MASK)
-						network->flags &=
-							~NETWORK_HAS_CCK;
-				}
-			}
-
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES: '%s' (%d)\n",
-					     rates_str, network->rates_len);
-			break;
-
-		case MFIE_TYPE_RATES_EX:
-#ifdef CONFIG_IEEE80211_DEBUG
-			p = rates_str;
-#endif
-			network->rates_ex_len = min(info_element->len, MAX_RATES_EX_LENGTH);
-			for (i = 0; i < network->rates_ex_len; i++) {
-				network->rates_ex[i] = info_element->data[i];
-				curRate_ex = network->rates_ex[i] & 0x7f;
-				if (hOpRate < curRate_ex)
-					hOpRate = curRate_ex;
-#ifdef CONFIG_IEEE80211_DEBUG
-				p += snprintf(p, sizeof(rates_str) - (p - rates_str), "%02X ", network->rates[i]);
-#endif
-				if (ieee80211_is_ofdm_rate(info_element->data[i])) {
-					network->flags |= NETWORK_HAS_OFDM;
-					if (info_element->data[i] &
-					    IEEE80211_BASIC_RATE_MASK)
-						network->flags &=
-							~NETWORK_HAS_CCK;
-				}
-			}
-
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_RATES_EX: '%s' (%d)\n",
-					     rates_str, network->rates_ex_len);
-			break;
-
-		case MFIE_TYPE_DS_SET:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_DS_SET: %d\n",
-					     info_element->data[0]);
-			if (stats->freq == IEEE80211_24GHZ_BAND)
-				network->channel = info_element->data[0];
-			break;
-
-		case MFIE_TYPE_FH_SET:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_FH_SET: ignored\n");
-			break;
-
-		case MFIE_TYPE_CF_SET:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_CF_SET: ignored\n");
-			break;
-
-		case MFIE_TYPE_TIM:
-
-			if (info_element->len < 4)
-				break;
-
-			network->dtim_period = info_element->data[1];
-
-			if (ieee->state != IEEE80211_LINKED)
-				break;
-
-			network->last_dtim_sta_time[0] = jiffies;
-			network->last_dtim_sta_time[1] = stats->mac_time[1];
-
-			network->dtim_data = IEEE80211_DTIM_VALID;
-
-			if (info_element->data[0] != 0)
-				break;
-
-			if (info_element->data[2] & 1)
-				network->dtim_data |= IEEE80211_DTIM_MBCAST;
-
-			offset = (info_element->data[2] >> 1)*2;
-
-			//printk("offset1:%x aid:%x\n",offset, ieee->assoc_id);
-
-			/* add and modified for ps 2008.1.22 */
-			if (ieee->assoc_id < 8*offset ||
-				ieee->assoc_id > 8*(offset + info_element->len - 3)) {
-				break;
-			}
-
-			offset = (ieee->assoc_id/8) - offset;// + ((aid % 8)? 0 : 1) ;
-
-		//	printk("offset:%x data:%x, ucast:%d\n", offset,
-			//	info_element->data[3+offset] ,
-			//	info_element->data[3+offset] & (1<<(ieee->assoc_id%8)));
-
-			if (info_element->data[3+offset] & (1<<(ieee->assoc_id%8)))
-				network->dtim_data |= IEEE80211_DTIM_UCAST;
-
-			break;
-
-		case MFIE_TYPE_IBSS_SET:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_IBSS_SET: ignored\n");
-			break;
-
-		case MFIE_TYPE_CHALLENGE:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_CHALLENGE: ignored\n");
-			break;
-
-		case MFIE_TYPE_GENERIC:
-			//nic is 87B
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_GENERIC: %d bytes\n",
-					     info_element->len);
-			if (info_element->len >= 4  &&
-			    info_element->data[0] == 0x00 &&
-			    info_element->data[1] == 0x50 &&
-			    info_element->data[2] == 0xf2 &&
-			    info_element->data[3] == 0x01) {
-				network->wpa_ie_len = min(info_element->len + 2,
-							 MAX_WPA_IE_LEN);
-				memcpy(network->wpa_ie, info_element,
-				       network->wpa_ie_len);
-			}
-
-			if (info_element->len == 7 &&
-			    info_element->data[0] == 0x00 &&
-			    info_element->data[1] == 0xe0 &&
-			    info_element->data[2] == 0x4c &&
-			    info_element->data[3] == 0x01 &&
-			    info_element->data[4] == 0x02) {
-				network->Turbo_Enable = 1;
-			}
-			if (1 == stats->nic_type) //nic 87
-				break;
-
-			if (info_element->len >= 5  &&
-			    info_element->data[0] == 0x00 &&
-			    info_element->data[1] == 0x50 &&
-			    info_element->data[2] == 0xf2 &&
-			    info_element->data[3] == 0x02 &&
-			    info_element->data[4] == 0x00) {
-				//printk(KERN_WARNING "wmm info updated: %x\n", info_element->data[6]);
-				//WMM Information Element
-				network->wmm_info = info_element->data[6];
-				network->QoS_Enable = 1;
-			}
-
-			if (info_element->len >= 8  &&
-			    info_element->data[0] == 0x00 &&
-			    info_element->data[1] == 0x50 &&
-			    info_element->data[2] == 0xf2 &&
-			    info_element->data[3] == 0x02 &&
-			    info_element->data[4] == 0x01) {
-				// Not care about version at present.
-				//WMM Information Element
-				//printk(KERN_WARNING "wmm info&param updated: %x\n", info_element->data[6]);
-				network->wmm_info = info_element->data[6];
-				//WMM Parameter Element
-				memcpy(network->wmm_param, (u8 *)(info_element->data + 8), (info_element->len - 8));
-				network->QoS_Enable = 1;
-			}
-			break;
-
-		case MFIE_TYPE_RSN:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_RSN: %d bytes\n",
-					     info_element->len);
-			network->rsn_ie_len = min(info_element->len + 2,
-						 MAX_WPA_IE_LEN);
-			memcpy(network->rsn_ie, info_element,
-			       network->rsn_ie_len);
-			break;
-		case MFIE_TYPE_COUNTRY:
-			IEEE80211_DEBUG_SCAN("MFIE_TYPE_COUNTRY: %d bytes\n",
-					     info_element->len);
-//			printk("=====>Receive <%s> Country IE\n",network->ssid);
-			ieee80211_extract_country_ie(ieee, info_element, network, beacon->header.addr2);
-			break;
-		default:
-			IEEE80211_DEBUG_SCAN("unsupported IE %d\n",
-					     info_element->id);
-			break;
-		}
-
-		left -= sizeof(struct ieee80211_info_element_hdr) +
-			info_element->len;
-		info_element = (struct ieee80211_info_element *)
-			&info_element->data[info_element->len];
-	}
-//by amy 080312
-	network->HighestOperaRate = hOpRate;
-//by amy 080312
-	network->mode = 0;
-	if (stats->freq == IEEE80211_52GHZ_BAND)
-		network->mode = IEEE_A;
-	else {
-		if (network->flags & NETWORK_HAS_OFDM)
-			network->mode |= IEEE_G;
-		if (network->flags & NETWORK_HAS_CCK)
-			network->mode |= IEEE_B;
-	}
-
-	if (network->mode == 0) {
-		IEEE80211_DEBUG_SCAN("Filtered out '%s (%pM)' "
-				     "network.\n",
-				     escape_essid(network->ssid,
-						  network->ssid_len),
-				     network->bssid);
-		return 1;
-	}
-
-	if (ieee80211_is_empty_essid(network->ssid, network->ssid_len))
-		network->flags |= NETWORK_EMPTY_ESSID;
-
-	stats->signal = ieee80211_TranslateToDbm(stats->signalstrength);
-	//stats->noise = stats->signal - stats->noise;
-	stats->noise = ieee80211_TranslateToDbm(100 - stats->signalstrength) - 25;
-	memcpy(&network->stats, stats, sizeof(network->stats));
-
-	return 0;
-}
-
-static inline int is_same_network(struct ieee80211_network *src,
-				  struct ieee80211_network *dst,
-				  struct ieee80211_device *ieee)
-{
-	/* A network is only a duplicate if the channel, BSSID, ESSID
-	 * and the capability field (in particular IBSS and BSS) all match.
-	 * We treat all <hidden> with the same BSSID and channel
-	 * as one network */
-	return (((src->ssid_len == dst->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) &&  //YJ,mod,080819,for hidden ap
-		//((src->ssid_len == dst->ssid_len) &&
-		(src->channel == dst->channel) &&
-		!memcmp(src->bssid, dst->bssid, ETH_ALEN) &&
-		(!memcmp(src->ssid, dst->ssid, src->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) && //YJ,mod,080819,for hidden ap
-		//!memcmp(src->ssid, dst->ssid, src->ssid_len) &&
-		((src->capability & WLAN_CAPABILITY_IBSS) ==
-		(dst->capability & WLAN_CAPABILITY_IBSS)) &&
-		((src->capability & WLAN_CAPABILITY_BSS) ==
-		(dst->capability & WLAN_CAPABILITY_BSS)));
-}
-
-inline void update_network(struct ieee80211_network *dst,
-			   struct ieee80211_network *src)
-{
-	unsigned char quality = src->stats.signalstrength;
-	unsigned char signal = 0;
-	unsigned char noise = 0;
-	if (dst->stats.signalstrength > 0)
-		quality = (dst->stats.signalstrength * 5 + src->stats.signalstrength + 5)/6;
-	signal = ieee80211_TranslateToDbm(quality);
-	//noise = signal - src->stats.noise;
-	if (dst->stats.noise > 0)
-		noise = (dst->stats.noise * 5 + src->stats.noise)/6;
-        //if(strcmp(dst->ssid, "linksys_lzm000") == 0)
-//	printk("ssid:%s, quality:%d, signal:%d\n", dst->ssid, quality, signal);
-	memcpy(&dst->stats, &src->stats, sizeof(struct ieee80211_rx_stats));
-	dst->stats.signalstrength = quality;
-	dst->stats.signal = signal;
-//	printk("==================>stats.signal is %d\n",dst->stats.signal);
-	dst->stats.noise = noise;
-
-
-	dst->capability = src->capability;
-	memcpy(dst->rates, src->rates, src->rates_len);
-	dst->rates_len = src->rates_len;
-	memcpy(dst->rates_ex, src->rates_ex, src->rates_ex_len);
-	dst->rates_ex_len = src->rates_ex_len;
-	dst->HighestOperaRate = src->HighestOperaRate;
-	//printk("==========>in %s: src->ssid is %s,chan is %d\n",__func__,src->ssid,src->channel);
-
-	//YJ,add,080819,for hidden ap
-	if (src->ssid_len > 0) {
-		//if(src->ssid_len == 13)
-		//	printk("=====================>>>>>>>> Dst ssid: %s Src ssid: %s\n", dst->ssid, src->ssid);
-		memset(dst->ssid, 0, dst->ssid_len);
-		dst->ssid_len = src->ssid_len;
-		memcpy(dst->ssid, src->ssid, src->ssid_len);
-	}
-	//YJ,add,080819,for hidden ap,end
-
-	dst->channel = src->channel;
-	dst->mode = src->mode;
-	dst->flags = src->flags;
-	dst->time_stamp[0] = src->time_stamp[0];
-	dst->time_stamp[1] = src->time_stamp[1];
-
-	dst->beacon_interval = src->beacon_interval;
-	dst->listen_interval = src->listen_interval;
-	dst->atim_window = src->atim_window;
-	dst->dtim_period = src->dtim_period;
-	dst->dtim_data = src->dtim_data;
-	dst->last_dtim_sta_time[0] = src->last_dtim_sta_time[0];
-	dst->last_dtim_sta_time[1] = src->last_dtim_sta_time[1];
-//	printk("update:%s, dtim_period:%x, dtim_data:%x\n", src->ssid, src->dtim_period, src->dtim_data);
-	memcpy(dst->wpa_ie, src->wpa_ie, src->wpa_ie_len);
-	dst->wpa_ie_len = src->wpa_ie_len;
-	memcpy(dst->rsn_ie, src->rsn_ie, src->rsn_ie_len);
-	dst->rsn_ie_len = src->rsn_ie_len;
-
-	dst->last_scanned = jiffies;
-	/* dst->last_associate is not overwritten */
-// disable QoS process now, added by David 2006/7/25
-#if 1
-	dst->wmm_info = src->wmm_info; //sure to exist in beacon or probe response frame.
-/*
-	if((dst->wmm_info^src->wmm_info)&0x0f) {//Param Set Count change, update Parameter
-	  memcpy(dst->wmm_param, src->wmm_param, IEEE80211_AC_PRAM_LEN);
-	}
-*/
-	if (src->wmm_param[0].ac_aci_acm_aifsn || \
-	   src->wmm_param[1].ac_aci_acm_aifsn || \
-	   src->wmm_param[2].ac_aci_acm_aifsn || \
-	   src->wmm_param[3].ac_aci_acm_aifsn) {
-		memcpy(dst->wmm_param, src->wmm_param, WME_AC_PRAM_LEN);
-	}
-	dst->QoS_Enable = src->QoS_Enable;
-#else
-	dst->QoS_Enable = 1;//for Rtl8187 simulation
-#endif
-	dst->SignalStrength = src->SignalStrength;
-	dst->Turbo_Enable = src->Turbo_Enable;
-	dst->CountryIeLen = src->CountryIeLen;
-	memcpy(dst->CountryIeBuf, src->CountryIeBuf, src->CountryIeLen);
-}
-
-
-inline void
-ieee80211_process_probe_response(struct ieee80211_device *ieee,
-				 struct ieee80211_probe_response *beacon,
-				 struct ieee80211_rx_stats *stats)
-{
-	struct ieee80211_network network;
-	struct ieee80211_network *target;
-	struct ieee80211_network *oldest = NULL;
-#ifdef CONFIG_IEEE80211_DEBUG
-	struct ieee80211_info_element *info_element = &beacon->info_element;
-#endif
-	unsigned long flags;
-	short renew;
-	u8 wmm_info;
-	u8 is_beacon = (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_BEACON) ? 1 : 0;  //YJ,add,080819,for hidden ap
-
-	memset(&network, 0, sizeof(struct ieee80211_network));
-
-	IEEE80211_DEBUG_SCAN(
-		"'%s' (%pM): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
-		escape_essid(info_element->data, info_element->len),
-		beacon->header.addr3,
-		(beacon->capability & (1<<0xf)) ? '1' : '0',
-		(beacon->capability & (1<<0xe)) ? '1' : '0',
-		(beacon->capability & (1<<0xd)) ? '1' : '0',
-		(beacon->capability & (1<<0xc)) ? '1' : '0',
-		(beacon->capability & (1<<0xb)) ? '1' : '0',
-		(beacon->capability & (1<<0xa)) ? '1' : '0',
-		(beacon->capability & (1<<0x9)) ? '1' : '0',
-		(beacon->capability & (1<<0x8)) ? '1' : '0',
-		(beacon->capability & (1<<0x7)) ? '1' : '0',
-		(beacon->capability & (1<<0x6)) ? '1' : '0',
-		(beacon->capability & (1<<0x5)) ? '1' : '0',
-		(beacon->capability & (1<<0x4)) ? '1' : '0',
-		(beacon->capability & (1<<0x3)) ? '1' : '0',
-		(beacon->capability & (1<<0x2)) ? '1' : '0',
-		(beacon->capability & (1<<0x1)) ? '1' : '0',
-		(beacon->capability & (1<<0x0)) ? '1' : '0');
-
-	if (ieee80211_network_init(ieee, beacon, &network, stats)) {
-		IEEE80211_DEBUG_SCAN("Dropped '%s' (%pM) via %s.\n",
-				     escape_essid(info_element->data,
-						  info_element->len),
-				     beacon->header.addr3,
-				     WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
-				     IEEE80211_STYPE_PROBE_RESP ?
-				     "PROBE RESPONSE" : "BEACON");
-		return;
-	}
-
-	// For Asus EeePc request,
-	// (1) if wireless adapter receive get any 802.11d country code in AP beacon,
-	//	   wireless adapter should follow the country code.
-	// (2)  If there is no any country code in beacon,
-	//       then wireless adapter should do active scan from ch1~11 and
-	//       passive scan from ch12~14
-	if (ieee->bGlobalDomain) {
-		if (WLAN_FC_GET_STYPE(beacon->header.frame_ctl) == IEEE80211_STYPE_PROBE_RESP) {
-			// Case 1: Country code
-			if (IS_COUNTRY_IE_VALID(ieee)) {
-				if (!IsLegalChannel(ieee, network.channel)) {
-					printk("GetScanInfo(): For Country code, filter probe response at channel(%d).\n", network.channel);
-					return;
-				}
-			}
-			// Case 2: No any country code.
-			else {
-				// Filter over channel ch12~14
-				if (network.channel > 11) {
-					printk("GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n", network.channel);
-					return;
-				}
-			}
-		} else {
-			// Case 1: Country code
-			if (IS_COUNTRY_IE_VALID(ieee)) {
-				if (!IsLegalChannel(ieee, network.channel)) {
-					printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n", network.channel);
-					return;
-				}
-			}
-			// Case 2: No any country code.
-			else {
-				// Filter over channel ch12~14
-				if (network.channel > 14) {
-					printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n", network.channel);
-					return;
-				}
-			}
-		}
-	}
-	/* The network parsed correctly -- so now we scan our known networks
-	 * to see if we can find it in our list.
-	 *
-	 * NOTE:  This search is definitely not optimized.  Once its doing
-	 *        the "right thing" we'll optimize it for efficiency if
-	 *        necessary */
-
-	/* Search for this entry in the list and update it if it is
-	 * already there. */
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (is_same_network(&ieee->current_network, &network, ieee)) {
-		wmm_info = ieee->current_network.wmm_info;
-		//YJ,add,080819,for hidden ap
-		if (is_beacon == 0)
-			network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & ieee->current_network.flags);
-		else if (ieee->state == IEEE80211_LINKED)
-			ieee->NumRxBcnInPeriod++;
-		//YJ,add,080819,for hidden ap,end
-		//printk("====>network.ssid=%s cur_ssid=%s\n", network.ssid, ieee->current_network.ssid);
-		update_network(&ieee->current_network, &network);
-	}
-
-	list_for_each_entry(target, &ieee->network_list, list) {
-		if (is_same_network(target, &network, ieee))
-			break;
-		if ((oldest == NULL) ||
-		    (target->last_scanned < oldest->last_scanned))
-			oldest = target;
-	}
-
-	/* If we didn't find a match, then get a new network slot to initialize
-	 * with this beacon's information */
-	if (&target->list == &ieee->network_list) {
-		if (list_empty(&ieee->network_free_list)) {
-			/* If there are no more slots, expire the oldest */
-			list_del(&oldest->list);
-			target = oldest;
-			IEEE80211_DEBUG_SCAN("Expired '%s' (%pM) from "
-					     "network list.\n",
-					     escape_essid(target->ssid,
-							  target->ssid_len),
-					     target->bssid);
-		} else {
-			/* Otherwise just pull from the free list */
-			target = list_entry(ieee->network_free_list.next,
-					    struct ieee80211_network, list);
-			list_del(ieee->network_free_list.next);
-		}
-
-
-#ifdef CONFIG_IEEE80211_DEBUG
-		IEEE80211_DEBUG_SCAN("Adding '%s' (%pM) via %s.\n",
-				     escape_essid(network.ssid,
-						  network.ssid_len),
-				     network.bssid,
-				     WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
-				     IEEE80211_STYPE_PROBE_RESP ?
-				     "PROBE RESPONSE" : "BEACON");
-#endif
-
-		memcpy(target, &network, sizeof(*target));
-		list_add_tail(&target->list, &ieee->network_list);
-	} else {
-		IEEE80211_DEBUG_SCAN("Updating '%s' (%pM) via %s.\n",
-				     escape_essid(target->ssid,
-						  target->ssid_len),
-				     target->bssid,
-				     WLAN_FC_GET_STYPE(beacon->header.frame_ctl) ==
-				     IEEE80211_STYPE_PROBE_RESP ?
-				     "PROBE RESPONSE" : "BEACON");
-
-		/* we have an entry and we are going to update it. But this entry may
-		 * be already expired. In this case we do the same as we found a new
-		 * net and call the new_net handler
-		 */
-		renew = !time_after(target->last_scanned + ieee->scan_age, jiffies);
-		//YJ,add,080819,for hidden ap
-		if (is_beacon == 0)
-			network.flags = (~NETWORK_EMPTY_ESSID & network.flags)|(NETWORK_EMPTY_ESSID & target->flags);
-		//if(strncmp(network.ssid, "linksys-c",9) == 0)
-		//	printk("====>2 network.ssid=%s FLAG=%d target.ssid=%s FLAG=%d\n", network.ssid, network.flags, target->ssid, target->flags);
-		if (((network.flags & NETWORK_EMPTY_ESSID) == NETWORK_EMPTY_ESSID) \
-		    && (((network.ssid_len > 0) && (strncmp(target->ssid, network.ssid, network.ssid_len)))\
-		    || ((ieee->current_network.ssid_len == network.ssid_len) && (strncmp(ieee->current_network.ssid, network.ssid, network.ssid_len) == 0) && (ieee->state == IEEE80211_NOLINK))))
-			renew = 1;
-		//YJ,add,080819,for hidden ap,end
-		update_network(target, &network);
-	}
-
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-void ieee80211_rx_mgt(struct ieee80211_device *ieee,
-		      struct ieee80211_hdr_4addr *header,
-		      struct ieee80211_rx_stats *stats)
-{
-	switch (WLAN_FC_GET_STYPE(header->frame_ctl)) {
-
-	case IEEE80211_STYPE_BEACON:
-		IEEE80211_DEBUG_MGMT("received BEACON (%d)\n",
-				     WLAN_FC_GET_STYPE(header->frame_ctl));
-		IEEE80211_DEBUG_SCAN("Beacon\n");
-		ieee80211_process_probe_response(
-			ieee, (struct ieee80211_probe_response *)header, stats);
-		break;
-
-	case IEEE80211_STYPE_PROBE_RESP:
-		IEEE80211_DEBUG_MGMT("received PROBE RESPONSE (%d)\n",
-				     WLAN_FC_GET_STYPE(header->frame_ctl));
-		IEEE80211_DEBUG_SCAN("Probe response\n");
-		ieee80211_process_probe_response(
-			ieee, (struct ieee80211_probe_response *)header, stats);
-		break;
-	}
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
deleted file mode 100644
index 03eb164798cd..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ /dev/null
@@ -1,2711 +0,0 @@
-/* IEEE 802.11 SoftMAC layer
- * Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
- *
- * Mostly extracted from the rtl8180-sa2400 driver for the
- * in-kernel generic ieee802.11 stack.
- *
- * Few lines might be stolen from other part of the ieee80211
- * stack. Copyright who own it's copyright
- *
- * WPA code stolen from the ipw2200 driver.
- * Copyright who own it's copyright.
- *
- * released under the GPL
- */
-
-#include "ieee80211.h"
-
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <linux/etherdevice.h>
-
-#include "dot11d.h"
-
-short ieee80211_is_54g(const struct ieee80211_network *net)
-{
-	return (net->rates_ex_len > 0) || (net->rates_len > 4);
-}
-
-short ieee80211_is_shortslot(const struct ieee80211_network *net)
-{
-	return net->capability & WLAN_CAPABILITY_SHORT_SLOT;
-}
-
-/* returns the total length needed for placing the RATE MFIE
- * tag and the EXTENDED RATE MFIE tag if needed.
- * It encludes two bytes per tag for the tag itself and its len
- */
-static unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee)
-{
-	unsigned int rate_len = 0;
-
-	if (ieee->modulation & IEEE80211_CCK_MODULATION)
-		rate_len = IEEE80211_CCK_RATE_LEN + 2;
-
-	if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-
-		rate_len += IEEE80211_OFDM_RATE_LEN + 2;
-
-	return rate_len;
-}
-
-/* place the MFIE rate, tag to the memory (double) poised.
- * Then it updates the pointer so that it points after the new MFIE tag added.
- */
-static void ieee80211_MFIE_Brate(struct ieee80211_device *ieee, u8 **tag_p)
-{
-	u8 *tag = *tag_p;
-
-	if (ieee->modulation & IEEE80211_CCK_MODULATION) {
-		*tag++ = MFIE_TYPE_RATES;
-		*tag++ = 4;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
-	}
-
-	/* We may add an option for custom rates that specific HW might support */
-	*tag_p = tag;
-}
-
-static void ieee80211_MFIE_Grate(struct ieee80211_device *ieee, u8 **tag_p)
-{
-	u8 *tag = *tag_p;
-
-		if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
-		*tag++ = MFIE_TYPE_RATES_EX;
-		*tag++ = 8;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
-		*tag++ = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
-
-	}
-	/* We may add an option for custom rates that specific HW might support */
-	*tag_p = tag;
-}
-
-static void ieee80211_WMM_Info(struct ieee80211_device *ieee, u8 **tag_p)
-{
-	u8 *tag = *tag_p;
-
-	*tag++ = MFIE_TYPE_GENERIC; /* 0 */
-	*tag++ = 7;
-	*tag++ = 0x00;
-	*tag++ = 0x50;
-	*tag++ = 0xf2;
-	*tag++ = 0x02; /* 5 */
-	*tag++ = 0x00;
-	*tag++ = 0x01;
-#ifdef SUPPORT_USPD
-	if (ieee->current_network.wmm_info & 0x80)
-		*tag++ = 0x0f|MAX_SP_Len;
-	else
-		*tag++ = MAX_SP_Len;
-#else
-	*tag++ = MAX_SP_Len;
-#endif
-	*tag_p = tag;
-}
-
-static void ieee80211_TURBO_Info(struct ieee80211_device *ieee, u8 **tag_p)
-{
-	u8 *tag = *tag_p;
-	*tag++ = MFIE_TYPE_GENERIC; /* 0 */
-	*tag++ = 7;
-	*tag++ = 0x00;
-	*tag++ = 0xe0;
-	*tag++ = 0x4c;
-	*tag++ = 0x01; /* 5 */
-	*tag++ = 0x02;
-	*tag++ = 0x11;
-	*tag++ = 0x00;
-	*tag_p = tag;
-	printk(KERN_ALERT "This is enable turbo mode IE process\n");
-}
-
-static void enqueue_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb)
-{
-	int nh;
-	nh = (ieee->mgmt_queue_head + 1) % MGMT_QUEUE_NUM;
-
-	ieee->mgmt_queue_head = nh;
-	ieee->mgmt_queue_ring[nh] = skb;
-}
-
-static struct sk_buff *dequeue_mgmt(struct ieee80211_device *ieee)
-{
-	struct sk_buff *ret;
-
-	if (ieee->mgmt_queue_tail == ieee->mgmt_queue_head)
-		return NULL;
-
-	ret = ieee->mgmt_queue_ring[ieee->mgmt_queue_tail];
-
-	ieee->mgmt_queue_tail =
-		(ieee->mgmt_queue_tail + 1) % MGMT_QUEUE_NUM;
-
-	return ret;
-}
-
-static void init_mgmt_queue(struct ieee80211_device *ieee)
-{
-	ieee->mgmt_queue_tail = ieee->mgmt_queue_head = 0;
-}
-
-void ieee80211_sta_wakeup(struct ieee80211_device *ieee, short nl);
-
-inline void softmac_mgmt_xmit(struct sk_buff *skb,
-			      struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	short single = ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE;
-	struct ieee80211_hdr_3addr  *header =
-		(struct ieee80211_hdr_3addr  *) skb->data;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	/* called with 2nd param 0, no mgmt lock required */
-	ieee80211_sta_wakeup(ieee, 0);
-
-	if (single) {
-		if (ieee->queue_stop) {
-			enqueue_mgmt(ieee, skb);
-		} else {
-			header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0]<<4);
-
-			if (ieee->seq_ctrl[0] == 0xFFF)
-				ieee->seq_ctrl[0] = 0;
-			else
-				ieee->seq_ctrl[0]++;
-
-			/* avoid watchdog triggers */
-			ieee->dev->trans_start = jiffies;
-			ieee->softmac_data_hard_start_xmit(skb, ieee->dev, ieee->basic_rate);
-		}
-
-		spin_unlock_irqrestore(&ieee->lock, flags);
-	} else {
-		spin_unlock_irqrestore(&ieee->lock, flags);
-		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags);
-
-		header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-		if (ieee->seq_ctrl[0] == 0xFFF)
-			ieee->seq_ctrl[0] = 0;
-		else
-			ieee->seq_ctrl[0]++;
-
-		/* avoid watchdog triggers */
-		ieee->dev->trans_start = jiffies;
-		ieee->softmac_hard_start_xmit(skb, ieee->dev);
-
-		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags);
-	}
-}
-
-inline void softmac_ps_mgmt_xmit(struct sk_buff *skb,
-				 struct ieee80211_device *ieee)
-{
-	short single = ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE;
-	struct ieee80211_hdr_3addr  *header =
-		(struct ieee80211_hdr_3addr  *) skb->data;
-
-	if (single) {
-		header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-		if (ieee->seq_ctrl[0] == 0xFFF)
-			ieee->seq_ctrl[0] = 0;
-		else
-			ieee->seq_ctrl[0]++;
-
-		/* avoid watchdog triggers */
-		ieee->dev->trans_start = jiffies;
-		ieee->softmac_data_hard_start_xmit(skb, ieee->dev, ieee->basic_rate);
-	} else {
-		header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-		if (ieee->seq_ctrl[0] == 0xFFF)
-			ieee->seq_ctrl[0] = 0;
-		else
-			ieee->seq_ctrl[0]++;
-
-		/* avoid watchdog triggers */
-		ieee->dev->trans_start = jiffies;
-		ieee->softmac_hard_start_xmit(skb, ieee->dev);
-	}
-}
-
-inline struct sk_buff *
-ieee80211_disassociate_skb(struct ieee80211_network *beacon,
-			   struct ieee80211_device *ieee, u8 asRsn)
-{
-	struct sk_buff *skb;
-	struct ieee80211_disassoc_frame *disass;
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_disassoc_frame));
-	if (!skb)
-		return NULL;
-
-	disass = (struct ieee80211_disassoc_frame *) skb_put(skb, sizeof(struct ieee80211_disassoc_frame));
-	disass->header.frame_control = cpu_to_le16(IEEE80211_STYPE_DISASSOC);
-	disass->header.duration_id = 0;
-
-	memcpy(disass->header.addr1, beacon->bssid, ETH_ALEN);
-	memcpy(disass->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(disass->header.addr3, beacon->bssid, ETH_ALEN);
-
-	disass->reasoncode = asRsn;
-	return skb;
-}
-
-void SendDisassociation(struct ieee80211_device *ieee, u8 *asSta, u8 asRsn)
-{
-	struct ieee80211_network *beacon = &ieee->current_network;
-	struct sk_buff *skb;
-	skb = ieee80211_disassociate_skb(beacon, ieee, asRsn);
-	if (skb)
-		softmac_mgmt_xmit(skb, ieee);
-}
-
-inline struct sk_buff *ieee80211_probe_req(struct ieee80211_device *ieee)
-{
-	unsigned int len, rate_len;
-	u8 *tag;
-	struct sk_buff *skb;
-	struct ieee80211_probe_request *req;
-
-	len = ieee->current_network.ssid_len;
-
-	rate_len = ieee80211_MFIE_rate_len(ieee);
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_probe_request) +
-			    2 + len + rate_len);
-	if (!skb)
-		return NULL;
-
-	req = (struct ieee80211_probe_request *) skb_put(skb, sizeof(struct ieee80211_probe_request));
-	req->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
-	req->header.duration_id = 0; /* FIXME: is this OK ? */
-
-	memset(req->header.addr1, 0xff, ETH_ALEN);
-	memcpy(req->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memset(req->header.addr3, 0xff, ETH_ALEN);
-
-	tag = (u8 *) skb_put(skb, len + 2 + rate_len);
-
-	*tag++ = MFIE_TYPE_SSID;
-	*tag++ = len;
-	memcpy(tag, ieee->current_network.ssid, len);
-	tag += len;
-	ieee80211_MFIE_Brate(ieee, &tag);
-	ieee80211_MFIE_Grate(ieee, &tag);
-
-	return skb;
-}
-
-struct sk_buff *ieee80211_get_beacon_(struct ieee80211_device *ieee);
-
-static void ieee80211_send_beacon(struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-
-	skb = ieee80211_get_beacon_(ieee);
-
-	if (skb) {
-		softmac_mgmt_xmit(skb, ieee);
-		ieee->softmac_stats.tx_beacons++;
-		dev_kfree_skb_any(skb);
-	}
-
-	ieee->beacon_timer.expires = jiffies +
-		(MSECS(ieee->current_network.beacon_interval - 5));
-
-	if (ieee->beacon_txing)
-		add_timer(&ieee->beacon_timer);
-}
-
-
-static void ieee80211_send_beacon_cb(unsigned long _ieee)
-{
-	struct ieee80211_device *ieee =
-		(struct ieee80211_device *) _ieee;
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->beacon_lock, flags);
-	ieee80211_send_beacon(ieee);
-	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
-}
-
-static void ieee80211_send_probe(struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-
-	skb = ieee80211_probe_req(ieee);
-	if (skb) {
-		softmac_mgmt_xmit(skb, ieee);
-		ieee->softmac_stats.tx_probe_rq++;
-	}
-}
-
-static void ieee80211_send_probe_requests(struct ieee80211_device *ieee)
-{
-	if (ieee->active_scan && (ieee->softmac_features & IEEE_SOFTMAC_PROBERQ)) {
-		ieee80211_send_probe(ieee);
-		ieee80211_send_probe(ieee);
-	}
-}
-
-/* this performs syncro scan blocking the caller until all channels
- * in the allowed channel map has been checked.
- */
-static void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
-{
-	short ch = 0;
-	u8 channel_map[MAX_CHANNEL_NUMBER+1];
-	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-	down(&ieee->scan_sem);
-
-	while (1) {
-		do {
-			ch++;
-			if (ch > MAX_CHANNEL_NUMBER)
-				goto out; /* scan completed */
-
-		} while (!channel_map[ch]);
-		/* this function can be called in two situations
-		 * 1- We have switched to ad-hoc mode and we are
-		 *    performing a complete syncro scan before conclude
-		 *    there are no interesting cell and to create a
-		 *    new one. In this case the link state is
-		 *    IEEE80211_NOLINK until we found an interesting cell.
-		 *    If so the ieee8021_new_net, called by the RX path
-		 *    will set the state to IEEE80211_LINKED, so we stop
-		 *    scanning
-		 * 2- We are linked and the root uses run iwlist scan.
-		 *    So we switch to IEEE80211_LINKED_SCANNING to remember
-		 *    that we are still logically linked (not interested in
-		 *    new network events, despite for updating the net list,
-		 *    but we are temporarily 'unlinked' as the driver shall
-		 *    not filter RX frames and the channel is changing.
-		 * So the only situation in witch are interested is to check
-		 * if the state become LINKED because of the #1 situation
-		 */
-
-		if (ieee->state == IEEE80211_LINKED)
-			goto out;
-
-		ieee->set_chan(ieee->dev, ch);
-		if (channel_map[ch] == 1)
-			ieee80211_send_probe_requests(ieee);
-
-		/* this prevent excessive time wait when we
-		 * need to wait for a syncro scan to end..
-		 */
-		if (ieee->sync_scan_hurryup)
-			goto out;
-
-		msleep_interruptible_rtl(IEEE80211_SOFTMAC_SCAN_TIME);
-	}
-out:
-	ieee->sync_scan_hurryup = 0;
-	up(&ieee->scan_sem);
-	if (IS_DOT11D_ENABLE(ieee))
-		DOT11D_ScanComplete(ieee);
-}
-
-void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
-{
-	int ch;
-	unsigned int watch_dog = 0;
-	u8 channel_map[MAX_CHANNEL_NUMBER+1];
-	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-	down(&ieee->scan_sem);
-	ch = ieee->current_network.channel;
-
-	while (1) {
-		/* this function can be called in two situations
-		 * 1- We have switched to ad-hoc mode and we are
-		 *    performing a complete syncro scan before conclude
-		 *    there are no interesting cell and to create a
-		 *    new one. In this case the link state is
-		 *    IEEE80211_NOLINK until we found an interesting cell.
-		 *    If so the ieee8021_new_net, called by the RX path
-		 *    will set the state to IEEE80211_LINKED, so we stop
-		 *    scanning
-		 * 2- We are linked and the root uses run iwlist scan.
-		 *    So we switch to IEEE80211_LINKED_SCANNING to remember
-		 *    that we are still logically linked (not interested in
-		 *    new network events, despite for updating the net list,
-		 *    but we are temporarily 'unlinked' as the driver shall
-		 *    not filter RX frames and the channel is changing.
-		 * So the only situation in witch are interested is to check
-		 * if the state become LINKED because of the #1 situation
-		 */
-		if (ieee->state == IEEE80211_LINKED)
-			goto out;
-
-		if (channel_map[ieee->current_network.channel] > 0)
-			ieee->set_chan(ieee->dev, ieee->current_network.channel);
-
-		if (channel_map[ieee->current_network.channel] == 1)
-			ieee80211_send_probe_requests(ieee);
-
-		msleep_interruptible_rtl(IEEE80211_SOFTMAC_SCAN_TIME);
-
-		do {
-			if (watch_dog++ >= MAX_CHANNEL_NUMBER)
-				goto out; /* scan completed */
-
-			ieee->current_network.channel = (ieee->current_network.channel + 1)%MAX_CHANNEL_NUMBER;
-		} while (!channel_map[ieee->current_network.channel]);
-	}
-out:
-	ieee->actscanning = false;
-	up(&ieee->scan_sem);
-	if (IS_DOT11D_ENABLE(ieee))
-		DOT11D_ScanComplete(ieee);
-}
-
-static void ieee80211_softmac_scan_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);
-	static short watchdog;
-	u8 channel_map[MAX_CHANNEL_NUMBER+1];
-	memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
-	down(&ieee->scan_sem);
-
-	do {
-		ieee->current_network.channel =
-			(ieee->current_network.channel + 1) % MAX_CHANNEL_NUMBER;
-		if (watchdog++ > MAX_CHANNEL_NUMBER)
-				goto out; /* no good chans */
-	} while (!channel_map[ieee->current_network.channel]);
-
-	if (ieee->scanning == 0) {
-		printk("error out, scanning = 0\n");
-		goto out;
-	}
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-	if (channel_map[ieee->current_network.channel] == 1)
-		ieee80211_send_probe_requests(ieee);
-
-	queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, IEEE80211_SOFTMAC_SCAN_TIME);
-	up(&ieee->scan_sem);
-	return;
-out:
-	ieee->actscanning = false;
-	watchdog = 0;
-	ieee->scanning = 0;
-	up(&ieee->scan_sem);
-
-	if (IS_DOT11D_ENABLE(ieee))
-		DOT11D_ScanComplete(ieee);
-	return;
-}
-
-static void ieee80211_beacons_start(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->beacon_lock, flags);
-
-	ieee->beacon_txing = 1;
-	ieee80211_send_beacon(ieee);
-
-	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
-}
-
-static void ieee80211_beacons_stop(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->beacon_lock, flags);
-
-	ieee->beacon_txing = 0;
-	del_timer_sync(&ieee->beacon_timer);
-
-	spin_unlock_irqrestore(&ieee->beacon_lock, flags);
-}
-
-void ieee80211_stop_send_beacons(struct ieee80211_device *ieee)
-{
-	if (ieee->stop_send_beacons)
-		ieee->stop_send_beacons(ieee->dev);
-	if (ieee->softmac_features & IEEE_SOFTMAC_BEACONS)
-		ieee80211_beacons_stop(ieee);
-}
-
-void ieee80211_start_send_beacons(struct ieee80211_device *ieee)
-{
-	if (ieee->start_send_beacons)
-		ieee->start_send_beacons(ieee->dev);
-	if (ieee->softmac_features & IEEE_SOFTMAC_BEACONS)
-		ieee80211_beacons_start(ieee);
-}
-
-static void ieee80211_softmac_stop_scan(struct ieee80211_device *ieee)
-{
-	down(&ieee->scan_sem);
-
-	if (ieee->scanning == 1) {
-		ieee->scanning = 0;
-		cancel_delayed_work(&ieee->softmac_scan_wq);
-	}
-
-	up(&ieee->scan_sem);
-}
-
-void ieee80211_stop_scan(struct ieee80211_device *ieee)
-{
-	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
-		ieee80211_softmac_stop_scan(ieee);
-	else
-		ieee->stop_scan(ieee->dev);
-}
-
-/* called with ieee->lock held */
-void ieee80211_rtl_start_scan(struct ieee80211_device *ieee)
-{
-	if (IS_DOT11D_ENABLE(ieee)) {
-		if (IS_COUNTRY_IE_VALID(ieee))
-			RESET_CIE_WATCHDOG(ieee);
-	}
-
-	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN) {
-		if (ieee->scanning == 0) {
-			ieee->scanning = 1;
-#if 1
-			queue_delayed_work(ieee->wq, &ieee->softmac_scan_wq, 0);
-#endif
-		}
-	}else
-		ieee->start_scan(ieee->dev);
-}
-
-/* called with wx_sem held */
-void ieee80211_start_scan_syncro(struct ieee80211_device *ieee)
-{
-	if (IS_DOT11D_ENABLE(ieee)) {
-		if (IS_COUNTRY_IE_VALID(ieee))
-			RESET_CIE_WATCHDOG(ieee);
-	}
-	ieee->sync_scan_hurryup = 0;
-
-	if (ieee->softmac_features & IEEE_SOFTMAC_SCAN)
-		ieee80211_softmac_scan_syncro(ieee);
-	else
-		ieee->scan_syncro(ieee->dev);
-}
-
-inline struct sk_buff *
-ieee80211_authentication_req(struct ieee80211_network *beacon,
-			     struct ieee80211_device *ieee, int challengelen)
-{
-	struct sk_buff *skb;
-	struct ieee80211_authentication *auth;
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_authentication) + challengelen);
-
-	if (!skb)
-		return NULL;
-
-	auth = (struct ieee80211_authentication *)
-		skb_put(skb, sizeof(struct ieee80211_authentication));
-
-	auth->header.frame_ctl = IEEE80211_STYPE_AUTH;
-	if (challengelen)
-		auth->header.frame_ctl |= IEEE80211_FCTL_WEP;
-
-	auth->header.duration_id = 0x013a; /* FIXME */
-
-	memcpy(auth->header.addr1, beacon->bssid, ETH_ALEN);
-	memcpy(auth->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(auth->header.addr3, beacon->bssid, ETH_ALEN);
-
-	auth->algorithm = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
-
-	auth->transaction = cpu_to_le16(ieee->associate_seq);
-	ieee->associate_seq++;
-
-	auth->status = cpu_to_le16(WLAN_STATUS_SUCCESS);
-
-	return skb;
-}
-
-static struct sk_buff *ieee80211_probe_resp(struct ieee80211_device *ieee,
-					    u8 *dest)
-{
-	u8 *tag;
-	int beacon_size;
-	struct ieee80211_probe_response *beacon_buf;
-	struct sk_buff *skb;
-	int encrypt;
-	int atim_len, erp_len;
-	struct ieee80211_crypt_data *crypt;
-
-	char *ssid = ieee->current_network.ssid;
-	int ssid_len = ieee->current_network.ssid_len;
-	int rate_len = ieee->current_network.rates_len+2;
-	int rate_ex_len = ieee->current_network.rates_ex_len;
-	int wpa_ie_len = ieee->wpa_ie_len;
-	if (rate_ex_len > 0)
-		rate_ex_len += 2;
-
-	if (ieee->current_network.capability & WLAN_CAPABILITY_IBSS)
-		atim_len = 4;
-	else
-		atim_len = 0;
-
-	if (ieee80211_is_54g(&ieee->current_network))
-		erp_len = 3;
-	else
-		erp_len = 0;
-
-	beacon_size = sizeof(struct ieee80211_probe_response)+
-		ssid_len
-		+3 /* channel */
-		+rate_len
-		+rate_ex_len
-		+atim_len
-		+wpa_ie_len
-		+erp_len;
-
-	skb = dev_alloc_skb(beacon_size);
-
-	if (!skb)
-		return NULL;
-
-	beacon_buf = (struct ieee80211_probe_response *) skb_put(skb, beacon_size);
-
-	memcpy(beacon_buf->header.addr1, dest, ETH_ALEN);
-	memcpy(beacon_buf->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(beacon_buf->header.addr3, ieee->current_network.bssid, ETH_ALEN);
-
-	beacon_buf->header.duration_id = 0; /* FIXME */
-	beacon_buf->beacon_interval =
-		cpu_to_le16(ieee->current_network.beacon_interval);
-	beacon_buf->capability =
-		cpu_to_le16(ieee->current_network.capability & WLAN_CAPABILITY_IBSS);
-
-	if (ieee->short_slot && (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_SLOT))
-		beacon_buf->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT);
-
-	crypt = ieee->crypt[ieee->tx_keyidx];
-
-	encrypt = ieee->host_encrypt && crypt && crypt->ops &&
-		((0 == strcmp(crypt->ops->name, "WEP")) || wpa_ie_len);
-
-	if (encrypt)
-		beacon_buf->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
-
-
-	beacon_buf->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_RESP);
-
-	beacon_buf->info_element.id = MFIE_TYPE_SSID;
-	beacon_buf->info_element.len = ssid_len;
-
-	tag = (u8 *) beacon_buf->info_element.data;
-
-	memcpy(tag, ssid, ssid_len);
-
-	tag += ssid_len;
-
-	*(tag++) = MFIE_TYPE_RATES;
-	*(tag++) = rate_len - 2;
-	memcpy(tag, ieee->current_network.rates, rate_len-2);
-	tag += rate_len - 2;
-
-	*(tag++) = MFIE_TYPE_DS_SET;
-	*(tag++) = 1;
-	*(tag++) = ieee->current_network.channel;
-
-	if (atim_len) {
-		*(tag++) = MFIE_TYPE_IBSS_SET;
-		*(tag++) = 2;
-		*((u16 *)(tag)) = cpu_to_le16(ieee->current_network.atim_window);
-		tag += 2;
-	}
-
-	if (erp_len) {
-		*(tag++) = MFIE_TYPE_ERP;
-		*(tag++) = 1;
-		*(tag++) = 0;
-	}
-
-	if (rate_ex_len) {
-		*(tag++) = MFIE_TYPE_RATES_EX;
-		*(tag++) = rate_ex_len-2;
-		memcpy(tag, ieee->current_network.rates_ex, rate_ex_len-2);
-		tag += rate_ex_len - 2;
-	}
-
-	if (wpa_ie_len)	{
-		if (ieee->iw_mode == IW_MODE_ADHOC) {
-			/* as Windows will set pairwise key same as the group
-			 * key which is not allowed in Linux, so set this for
-			 * IOT issue.
-			 */
-			memcpy(&ieee->wpa_ie[14], &ieee->wpa_ie[8], 4);
-		}
-
-		memcpy(tag, ieee->wpa_ie, ieee->wpa_ie_len);
-	}
-	skb->dev = ieee->dev;
-	return skb;
-}
-
-static struct sk_buff *ieee80211_assoc_resp(struct ieee80211_device *ieee,
-					    u8 *dest)
-{
-	struct sk_buff *skb;
-	u8 *tag;
-
-	struct ieee80211_crypt_data *crypt;
-	struct ieee80211_assoc_response_frame *assoc;
-	short encrypt;
-
-	unsigned int rate_len = ieee80211_MFIE_rate_len(ieee);
-	int len = sizeof(struct ieee80211_assoc_response_frame) + rate_len;
-
-	skb = dev_alloc_skb(len);
-
-	if (!skb)
-		return NULL;
-
-	assoc = (struct ieee80211_assoc_response_frame *)
-		skb_put(skb, sizeof(struct ieee80211_assoc_response_frame));
-
-	assoc->header.frame_control = cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP);
-	memcpy(assoc->header.addr1, dest, ETH_ALEN);
-	memcpy(assoc->header.addr3, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(assoc->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	assoc->capability = cpu_to_le16(ieee->iw_mode == IW_MODE_MASTER ?
-		WLAN_CAPABILITY_BSS : WLAN_CAPABILITY_IBSS);
-
-	if (ieee->short_slot)
-		assoc->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT);
-
-	if (ieee->host_encrypt)
-		crypt = ieee->crypt[ieee->tx_keyidx];
-	else
-		crypt = NULL;
-
-	encrypt = (crypt && crypt->ops);
-
-	if (encrypt)
-		assoc->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
-
-	assoc->status = 0;
-	assoc->aid = cpu_to_le16(ieee->assoc_id);
-	if (ieee->assoc_id == 0x2007)
-		ieee->assoc_id = 0;
-	else
-		ieee->assoc_id++;
-
-	tag = (u8 *) skb_put(skb, rate_len);
-
-	ieee80211_MFIE_Brate(ieee, &tag);
-	ieee80211_MFIE_Grate(ieee, &tag);
-
-	return skb;
-}
-
-static struct sk_buff *ieee80211_auth_resp(struct ieee80211_device *ieee,
-					   int status, u8 *dest)
-{
-	struct sk_buff *skb;
-	struct ieee80211_authentication *auth;
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_authentication)+1);
-
-	if (!skb)
-		return NULL;
-
-	skb->len = sizeof(struct ieee80211_authentication);
-
-	auth = (struct ieee80211_authentication *)skb->data;
-
-	auth->status = cpu_to_le16(status);
-	auth->transaction = cpu_to_le16(2);
-	auth->algorithm = cpu_to_le16(WLAN_AUTH_OPEN);
-
-	memcpy(auth->header.addr3, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(auth->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(auth->header.addr1, dest, ETH_ALEN);
-	auth->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_AUTH);
-	return skb;
-}
-
-static struct sk_buff *ieee80211_null_func(struct ieee80211_device *ieee, short pwr)
-{
-	struct sk_buff *skb;
-	struct ieee80211_hdr_3addr *hdr;
-
-	skb = dev_alloc_skb(sizeof(struct ieee80211_hdr_3addr));
-
-	if (!skb)
-		return NULL;
-
-	hdr = (struct ieee80211_hdr_3addr *)skb_put(skb, sizeof(struct ieee80211_hdr_3addr));
-
-	memcpy(hdr->addr1, ieee->current_network.bssid, ETH_ALEN);
-	memcpy(hdr->addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(hdr->addr3, ieee->current_network.bssid, ETH_ALEN);
-
-	hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
-		IEEE80211_STYPE_NULLFUNC | IEEE80211_FCTL_TODS |
-		(pwr ? IEEE80211_FCTL_PM:0));
-
-	return skb;
-}
-
-static void ieee80211_resp_to_assoc_rq(struct ieee80211_device *ieee, u8 *dest)
-{
-	struct sk_buff *buf = ieee80211_assoc_resp(ieee, dest);
-
-	if (buf) {
-		softmac_mgmt_xmit(buf, ieee);
-		dev_kfree_skb_any(buf);
-	}
-}
-
-static void ieee80211_resp_to_auth(struct ieee80211_device *ieee, int s, u8 *dest)
-{
-	struct sk_buff *buf = ieee80211_auth_resp(ieee, s, dest);
-
-	if (buf) {
-		softmac_mgmt_xmit(buf, ieee);
-		dev_kfree_skb_any(buf);
-	}
-}
-
-static void ieee80211_resp_to_probe(struct ieee80211_device *ieee, u8 *dest)
-{
-	struct sk_buff *buf = ieee80211_probe_resp(ieee, dest);
-
-	if (buf) {
-		softmac_mgmt_xmit(buf, ieee);
-		dev_kfree_skb_any(buf);
-	}
-}
-
-inline struct sk_buff *
-ieee80211_association_req(struct ieee80211_network *beacon,
-			  struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-
-	struct ieee80211_assoc_request_frame *hdr;
-	u8 *tag;
-	unsigned int wpa_len = beacon->wpa_ie_len;
-#if 1
-	/* for testing purpose */
-	unsigned int rsn_len = beacon->rsn_ie_len;
-#endif
-	unsigned int rate_len = ieee80211_MFIE_rate_len(ieee);
-	unsigned int wmm_info_len = beacon->QoS_Enable?9:0;
-	unsigned int turbo_info_len = beacon->Turbo_Enable?9:0;
-
-	u8  encry_proto = ieee->wpax_type_notify & 0xff;
-
-	int len = 0;
-
-	/* [0] Notify type of encryption: WPA/WPA2
-	 * [1] pair wise type
-	 * [2] authen type
-	 */
-	if (ieee->wpax_type_set) {
-		if (IEEE_PROTO_WPA == encry_proto) {
-			rsn_len = 0;
-		} else if (IEEE_PROTO_RSN == encry_proto) {
-			wpa_len = 0;
-		}
-	}
-	len = sizeof(struct ieee80211_assoc_request_frame)+
-		+ beacon->ssid_len /* essid tagged val */
-		+ rate_len /* rates tagged val */
-		+ wpa_len
-		+ rsn_len
-		+ wmm_info_len
-		+ turbo_info_len;
-
-	skb = dev_alloc_skb(len);
-
-	if (!skb)
-		return NULL;
-
-	hdr = (struct ieee80211_assoc_request_frame *)
-		skb_put(skb, sizeof(struct ieee80211_assoc_request_frame));
-
-	hdr->header.frame_control = IEEE80211_STYPE_ASSOC_REQ;
-	hdr->header.duration_id = 37; /* FIXME */
-	memcpy(hdr->header.addr1, beacon->bssid, ETH_ALEN);
-	memcpy(hdr->header.addr2, ieee->dev->dev_addr, ETH_ALEN);
-	memcpy(hdr->header.addr3, beacon->bssid, ETH_ALEN);
-	memcpy(ieee->ap_mac_addr, beacon->bssid, ETH_ALEN); /* for HW security */
-
-	hdr->capability = cpu_to_le16(WLAN_CAPABILITY_BSS);
-	if (beacon->capability & WLAN_CAPABILITY_PRIVACY)
-		hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
-	if (beacon->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
-		hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_PREAMBLE);
-
-	if (ieee->short_slot)
-		hdr->capability |= cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT);
-
-	hdr->listen_interval = 0xa; /* FIXME */
-
-	hdr->info_element.id = MFIE_TYPE_SSID;
-
-	hdr->info_element.len = beacon->ssid_len;
-	tag = skb_put(skb, beacon->ssid_len);
-	memcpy(tag, beacon->ssid, beacon->ssid_len);
-
-	tag = skb_put(skb, rate_len);
-
-	ieee80211_MFIE_Brate(ieee, &tag);
-	ieee80211_MFIE_Grate(ieee, &tag);
-
-	/* add rsn==0 condition for ap's mix security mode(wpa+wpa2)
-	 * choose AES encryption as default algorithm while using mixed mode.
-	 */
-
-	tag = skb_put(skb, ieee->wpa_ie_len);
-	memcpy(tag, ieee->wpa_ie, ieee->wpa_ie_len);
-
-	tag = skb_put(skb, wmm_info_len);
-	if (wmm_info_len)
-	  ieee80211_WMM_Info(ieee, &tag);
-
-	tag = skb_put(skb, turbo_info_len);
-	if (turbo_info_len)
-		ieee80211_TURBO_Info(ieee, &tag);
-
-	return skb;
-}
-
-void ieee80211_associate_abort(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	ieee->associate_seq++;
-
-	/* don't scan, and avoid to have the RX path possibly
-	 * try again to associate. Even do not react to AUTH or
-	 * ASSOC response. Just wait for the retry wq to be scheduled.
-	 * Here we will check if there are good nets to associate
-	 * with, so we retry or just get back to NO_LINK and scanning
-	 */
-	if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING) {
-		IEEE80211_DEBUG_MGMT("Authentication failed\n");
-		ieee->softmac_stats.no_auth_rs++;
-	} else {
-		IEEE80211_DEBUG_MGMT("Association failed\n");
-		ieee->softmac_stats.no_ass_rs++;
-	}
-
-	ieee->state = IEEE80211_ASSOCIATING_RETRY;
-
-	queue_delayed_work(ieee->wq, &ieee->associate_retry_wq, IEEE80211_SOFTMAC_ASSOC_RETRY_TIME);
-
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-static void ieee80211_associate_abort_cb(unsigned long dev)
-{
-	ieee80211_associate_abort((struct ieee80211_device *) dev);
-}
-
-static void ieee80211_associate_step1(struct ieee80211_device *ieee)
-{
-	struct ieee80211_network *beacon = &ieee->current_network;
-	struct sk_buff *skb;
-
-	IEEE80211_DEBUG_MGMT("Stopping scan\n");
-	ieee->softmac_stats.tx_auth_rq++;
-	skb = ieee80211_authentication_req(beacon, ieee, 0);
-	if (!skb) {
-		ieee80211_associate_abort(ieee);
-	} else {
-		ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATING;
-		IEEE80211_DEBUG_MGMT("Sending authentication request\n");
-		softmac_mgmt_xmit(skb, ieee);
-		/* BUGON when you try to add_timer twice, using mod_timer may
-		 * be better.
-		 */
-		if (!timer_pending(&ieee->associate_timer)) {
-			ieee->associate_timer.expires = jiffies + (HZ / 2);
-			add_timer(&ieee->associate_timer);
-		}
-		/* If call dev_kfree_skb_any,a warning will ocur....
-		 * KERNEL: assertion (!atomic_read(&skb->users)) failed at
-		 * net/core/dev.c (1708)
-		 */
-	}
-}
-
-static void ieee80211_rtl_auth_challenge(struct ieee80211_device *ieee, u8 *challenge,
-				  int chlen)
-{
-	u8 *c;
-	struct sk_buff *skb;
-	struct ieee80211_network *beacon = &ieee->current_network;
-	del_timer_sync(&ieee->associate_timer);
-	ieee->associate_seq++;
-	ieee->softmac_stats.tx_auth_rq++;
-
-	skb = ieee80211_authentication_req(beacon, ieee, chlen+2);
-	if (!skb)
-		ieee80211_associate_abort(ieee);
-	else {
-		c = skb_put(skb, chlen+2);
-		*(c++) = MFIE_TYPE_CHALLENGE;
-		*(c++) = chlen;
-		memcpy(c, challenge, chlen);
-
-		IEEE80211_DEBUG_MGMT("Sending authentication challenge response\n");
-
-		ieee80211_encrypt_fragment(ieee, skb, sizeof(struct ieee80211_hdr_3addr));
-
-		softmac_mgmt_xmit(skb, ieee);
-		if (!timer_pending(&ieee->associate_timer)) {
-		ieee->associate_timer.expires = jiffies + (HZ / 2);
-		add_timer(&ieee->associate_timer);
-		}
-		dev_kfree_skb_any(skb);
-	}
-	kfree(challenge);
-}
-
-static void ieee80211_associate_step2(struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-	struct ieee80211_network *beacon = &ieee->current_network;
-
-	del_timer_sync(&ieee->associate_timer);
-
-	IEEE80211_DEBUG_MGMT("Sending association request\n");
-	ieee->softmac_stats.tx_ass_rq++;
-	skb = ieee80211_association_req(beacon, ieee);
-	if (!skb)
-		ieee80211_associate_abort(ieee);
-	else {
-		softmac_mgmt_xmit(skb, ieee);
-		if (!timer_pending(&ieee->associate_timer)) {
-		ieee->associate_timer.expires = jiffies + (HZ / 2);
-		add_timer(&ieee->associate_timer);
-		}
-	}
-}
-
-static void ieee80211_associate_complete_wq(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_complete_wq);
-
-	printk(KERN_INFO "Associated successfully\n");
-	if (ieee80211_is_54g(&ieee->current_network) &&
-		(ieee->modulation & IEEE80211_OFDM_MODULATION)) {
-		ieee->rate = 540;
-		printk(KERN_INFO"Using G rates\n");
-	} else {
-		ieee->rate = 110;
-		printk(KERN_INFO"Using B rates\n");
-	}
-	ieee->link_change(ieee->dev);
-	notify_wx_assoc_event(ieee);
-	if (ieee->data_hard_resume)
-		ieee->data_hard_resume(ieee->dev);
-	netif_carrier_on(ieee->dev);
-}
-
-static void ieee80211_associate_complete(struct ieee80211_device *ieee)
-{
-	del_timer_sync(&ieee->associate_timer);
-
-	ieee->state = IEEE80211_LINKED;
-	IEEE80211_DEBUG_MGMT("Successfully associated\n");
-
-	queue_work(ieee->wq, &ieee->associate_complete_wq);
-}
-
-static void ieee80211_associate_procedure_wq(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, associate_procedure_wq);
-
-	ieee->sync_scan_hurryup = 1;
-	down(&ieee->wx_sem);
-
-	if (ieee->data_hard_stop)
-		ieee->data_hard_stop(ieee->dev);
-
-	ieee80211_stop_scan(ieee);
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-
-	ieee->associate_seq = 1;
-	ieee80211_associate_step1(ieee);
-
-	up(&ieee->wx_sem);
-}
-
-inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee,
-				      struct ieee80211_network *net)
-{
-	u8 tmp_ssid[IW_ESSID_MAX_SIZE+1];
-	int tmp_ssid_len = 0;
-
-	short apset, ssidset, ssidbroad, apmatch, ssidmatch;
-
-	/* we are interested in new new only if we are not associated
-	 * and we are not associating / authenticating
-	 */
-	if (ieee->state != IEEE80211_NOLINK)
-		return;
-
-	if ((ieee->iw_mode == IW_MODE_INFRA) && !(net->capability & WLAN_CAPABILITY_BSS))
-		return;
-
-	if ((ieee->iw_mode == IW_MODE_ADHOC) && !(net->capability & WLAN_CAPABILITY_IBSS))
-		return;
-
-	if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) {
-		/* if the user specified the AP MAC, we need also the essid
-		 * This could be obtained by beacons or, if the network does not
-		 * broadcast it, it can be put manually.
-		 */
-		apset = ieee->wap_set;
-		ssidset = ieee->ssid_set;
-		ssidbroad =  !(net->ssid_len == 0 || net->ssid[0] == '\0');
-		apmatch = (memcmp(ieee->current_network.bssid, net->bssid, ETH_ALEN) == 0);
-
-		if (ieee->current_network.ssid_len != net->ssid_len)
-			ssidmatch = 0;
-		else
-			ssidmatch = (0 == strncmp(ieee->current_network.ssid, net->ssid, net->ssid_len));
-
-		/* if the user set the AP check if match.
-		 * if the network does not broadcast essid we check the user
-		 * supplied ANY essid
-		 * if the network does broadcast and the user does not set essid
-		 * it is OK
-		 * if the network does broadcast and the user did set essid
-		 * chech if essid match
-		 * (apset && apmatch && ((ssidset && ssidbroad && ssidmatch) ||
-		 *  (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) ||
-		 * if the ap is not set, check that the user set the bssid and
-		 * the network does broadcast and that those two bssid matches
-		 * (!apset && ssidset && ssidbroad && ssidmatch)
-		 */
-		if ((apset && apmatch && ((ssidset && ssidbroad && ssidmatch) ||
-		     (ssidbroad && !ssidset) || (!ssidbroad && ssidset))) ||
-		    (!apset && ssidset && ssidbroad && ssidmatch)) {
-			/* if the essid is hidden replace it with the
-			 * essid provided by the user.
-			 */
-			if (!ssidbroad) {
-				strncpy(tmp_ssid, ieee->current_network.ssid, IW_ESSID_MAX_SIZE);
-				tmp_ssid_len = ieee->current_network.ssid_len;
-			}
-			memcpy(&ieee->current_network, net, sizeof(struct ieee80211_network));
-
-			if (!ssidbroad) {
-				strncpy(ieee->current_network.ssid, tmp_ssid, IW_ESSID_MAX_SIZE);
-				ieee->current_network.ssid_len = tmp_ssid_len;
-			}
-			printk(KERN_INFO"Linking with %s: channel is %d\n", ieee->current_network.ssid, ieee->current_network.channel);
-
-			if (ieee->iw_mode == IW_MODE_INFRA) {
-				ieee->state = IEEE80211_ASSOCIATING;
-				ieee->beinretry = false;
-				queue_work(ieee->wq, &ieee->associate_procedure_wq);
-			} else {
-				if (ieee80211_is_54g(&ieee->current_network) &&
-						(ieee->modulation & IEEE80211_OFDM_MODULATION)) {
-					ieee->rate = 540;
-					printk(KERN_INFO"Using G rates\n");
-				} else {
-					ieee->rate = 110;
-					printk(KERN_INFO"Using B rates\n");
-				}
-				ieee->state = IEEE80211_LINKED;
-				ieee->beinretry = false;
-			}
-		}
-	}
-}
-
-void ieee80211_softmac_check_all_nets(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	struct ieee80211_network *target;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	list_for_each_entry(target, &ieee->network_list, list) {
-		/* if the state become different that NOLINK means
-		 * we had found what we are searching for
-		 */
-		if (ieee->state != IEEE80211_NOLINK)
-			break;
-
-		if (ieee->scan_age == 0 || time_after(target->last_scanned + ieee->scan_age, jiffies))
-			ieee80211_softmac_new_net(ieee, target);
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-static inline u16 auth_parse(struct sk_buff *skb, u8 **challenge, int *chlen)
-{
-	struct ieee80211_authentication *a;
-	u8 *t;
-	if (skb->len < (sizeof(struct ieee80211_authentication) - sizeof(struct ieee80211_info_element))) {
-		IEEE80211_DEBUG_MGMT("invalid len in auth resp: %d\n", skb->len);
-		return 0xcafe;
-	}
-	*challenge = NULL;
-	a = (struct ieee80211_authentication *) skb->data;
-	if (skb->len > (sizeof(struct ieee80211_authentication) + 3)) {
-		t = skb->data + sizeof(struct ieee80211_authentication);
-
-		if (*(t++) == MFIE_TYPE_CHALLENGE) {
-			*chlen = *(t++);
-			*challenge = kmemdup(t, *chlen, GFP_ATOMIC);
-			if (!*challenge)
-				return -ENOMEM;
-		}
-	}
-	return cpu_to_le16(a->status);
-}
-
-static int auth_rq_parse(struct sk_buff *skb, u8 *dest)
-{
-	struct ieee80211_authentication *a;
-
-	if (skb->len < (sizeof(struct ieee80211_authentication) - sizeof(struct ieee80211_info_element))) {
-		IEEE80211_DEBUG_MGMT("invalid len in auth request: %d\n", skb->len);
-		return -1;
-	}
-	a = (struct ieee80211_authentication *) skb->data;
-
-	memcpy(dest, a->header.addr2, ETH_ALEN);
-
-	if (le16_to_cpu(a->algorithm) != WLAN_AUTH_OPEN)
-		return  WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG;
-
-	return WLAN_STATUS_SUCCESS;
-}
-
-static short probe_rq_parse(struct ieee80211_device *ieee, struct sk_buff *skb,
-			    u8 *src)
-{
-	u8 *tag;
-	u8 *skbend;
-	u8 *ssid = NULL;
-	u8 ssidlen = 0;
-
-	struct ieee80211_hdr_3addr   *header =
-		(struct ieee80211_hdr_3addr   *) skb->data;
-
-	if (skb->len < sizeof(struct ieee80211_hdr_3addr))
-		return -1; /* corrupted */
-
-	memcpy(src, header->addr2, ETH_ALEN);
-
-	skbend = (u8 *)skb->data + skb->len;
-
-	tag = skb->data + sizeof(struct ieee80211_hdr_3addr);
-
-	while (tag+1 < skbend) {
-		if (*tag == 0) {
-			ssid = tag+2;
-			ssidlen = *(tag+1);
-			break;
-		}
-		tag++; /* point to the len field */
-		tag = tag + *(tag); /* point to the last data byte of the tag */
-		tag++; /* point to the next tag */
-	}
-
-	if (ssidlen == 0)
-		return 1;
-
-	if (!ssid)
-		 return 1; /* ssid not found in tagged param */
-
-	return (!strncmp(ssid, ieee->current_network.ssid, ssidlen));
-
-}
-
-static int assoc_rq_parse(struct sk_buff *skb, u8 *dest)
-{
-	struct ieee80211_assoc_request_frame *a;
-
-	if (skb->len < (sizeof(struct ieee80211_assoc_request_frame) -
-		sizeof(struct ieee80211_info_element))) {
-
-		IEEE80211_DEBUG_MGMT("invalid len in auth request:%d\n", skb->len);
-		return -1;
-	}
-
-	a = (struct ieee80211_assoc_request_frame *) skb->data;
-
-	memcpy(dest, a->header.addr2, ETH_ALEN);
-
-	return 0;
-}
-
-static inline u16 assoc_parse(struct sk_buff *skb, int *aid)
-{
-	struct ieee80211_assoc_response_frame *a;
-	if (skb->len < sizeof(struct ieee80211_assoc_response_frame)) {
-		IEEE80211_DEBUG_MGMT("invalid len in auth resp: %d\n", skb->len);
-		return 0xcafe;
-	}
-
-	a = (struct ieee80211_assoc_response_frame *) skb->data;
-	*aid = le16_to_cpu(a->aid) & 0x3fff;
-	return le16_to_cpu(a->status);
-}
-
-static inline void ieee80211_rx_probe_rq(struct ieee80211_device *ieee,
-					 struct sk_buff *skb)
-{
-	u8 dest[ETH_ALEN];
-
-	ieee->softmac_stats.rx_probe_rq++;
-	if (probe_rq_parse(ieee, skb, dest)) {
-		ieee->softmac_stats.tx_probe_rs++;
-		ieee80211_resp_to_probe(ieee, dest);
-	}
-}
-
-inline void ieee80211_rx_auth_rq(struct ieee80211_device *ieee,
-				 struct sk_buff *skb)
-{
-	u8 dest[ETH_ALEN];
-	int status;
-	ieee->softmac_stats.rx_auth_rq++;
-
-	status = auth_rq_parse(skb, dest);
-	if (status != -1)
-		ieee80211_resp_to_auth(ieee, status, dest);
-}
-
-inline void
-ieee80211_rx_assoc_rq(struct ieee80211_device *ieee, struct sk_buff *skb)
-{
-
-	u8 dest[ETH_ALEN];
-
-	ieee->softmac_stats.rx_ass_rq++;
-	if (assoc_rq_parse(skb, dest) != -1)
-		ieee80211_resp_to_assoc_rq(ieee, dest);
-
-
-	printk(KERN_INFO"New client associated: %pM\n", dest);
-}
-
-void ieee80211_sta_ps_send_null_frame(struct ieee80211_device *ieee, short pwr)
-{
-	struct sk_buff *buf = ieee80211_null_func(ieee, pwr);
-
-	if (buf)
-		softmac_ps_mgmt_xmit(buf, ieee);
-}
-
-static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h,
-			     u32 *time_l)
-{
-	int timeout = 0;
-
-	u8 dtim;
-	dtim = ieee->current_network.dtim_data;
-
-	if (!(dtim & IEEE80211_DTIM_VALID))
-		return 0;
-	else
-		timeout = ieee->current_network.beacon_interval;
-
-	ieee->current_network.dtim_data = IEEE80211_DTIM_INVALID;
-
-	if (dtim & ((IEEE80211_DTIM_UCAST | IEEE80211_DTIM_MBCAST) & ieee->ps))
-		return 2;
-
-	if (!time_after(jiffies, ieee->dev->trans_start + MSECS(timeout)))
-		return 0;
-
-	if (!time_after(jiffies, ieee->last_rx_ps_time + MSECS(timeout)))
-		return 0;
-
-	if ((ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE) &&
-		(ieee->mgmt_queue_tail != ieee->mgmt_queue_head))
-		return 0;
-
-	if (time_l) {
-		*time_l = ieee->current_network.last_dtim_sta_time[0]
-			+ MSECS((ieee->current_network.beacon_interval));
-	}
-
-	if (time_h) {
-		*time_h = ieee->current_network.last_dtim_sta_time[1];
-		if (time_l && *time_l < ieee->current_network.last_dtim_sta_time[0])
-			*time_h += 1;
-	}
-
-	return 1;
-}
-
-static inline void ieee80211_sta_ps(struct ieee80211_device *ieee)
-{
-
-	u32 th, tl;
-	short sleep;
-
-	unsigned long flags, flags2;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if ((ieee->ps == IEEE80211_PS_DISABLED ||
-		ieee->iw_mode != IW_MODE_INFRA ||
-		ieee->state != IEEE80211_LINKED)) {
-
-		/* #warning CHECK_LOCK_HERE */
-		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
-
-		ieee80211_sta_wakeup(ieee, 1);
-
-		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
-	}
-
-	sleep = ieee80211_sta_ps_sleep(ieee, &th, &tl);
-	/* 2 wake, 1 sleep, 0 do nothing */
-	if (sleep == 0)
-		goto out;
-
-	if (sleep == 1) {
-		if (ieee->sta_sleep == 1)
-			ieee->enter_sleep_state(ieee->dev, th, tl);
-
-		else if (ieee->sta_sleep == 0) {
-			spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
-			if (ieee->ps_is_queue_empty(ieee->dev)) {
-				ieee->sta_sleep = 2;
-
-				ieee->ps_request_tx_ack(ieee->dev);
-
-				ieee80211_sta_ps_send_null_frame(ieee, 1);
-
-				ieee->ps_th = th;
-				ieee->ps_tl = tl;
-			}
-			spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
-		}
-	} else if (sleep == 2) {
-		/* #warning CHECK_LOCK_HERE */
-		spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
-
-		ieee80211_sta_wakeup(ieee, 1);
-
-		spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
-	}
-out:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-void ieee80211_sta_wakeup(struct ieee80211_device *ieee, short nl)
-{
-	if (ieee->sta_sleep == 0) {
-		if (nl) {
-			ieee->ps_request_tx_ack(ieee->dev);
-			ieee80211_sta_ps_send_null_frame(ieee, 0);
-		}
-		return;
-	}
-
-	if (ieee->sta_sleep == 1)
-		ieee->sta_wake_up(ieee->dev);
-
-	ieee->sta_sleep = 0;
-
-	if (nl) {
-		ieee->ps_request_tx_ack(ieee->dev);
-		ieee80211_sta_ps_send_null_frame(ieee, 0);
-	}
-}
-
-void ieee80211_ps_tx_ack(struct ieee80211_device *ieee, short success)
-{
-	unsigned long flags, flags2;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	if (ieee->sta_sleep == 2) {
-		/* Null frame with PS bit set */
-		if (success) {
-			ieee->sta_sleep = 1;
-			ieee->enter_sleep_state(ieee->dev, ieee->ps_th, ieee->ps_tl);
-		}
-		/* if the card report not success we can't be sure the AP
-		 * has not RXed so we can't assume the AP believe us awake
-		 */
-	} else {
-		if ((ieee->sta_sleep == 0) && !success) {
-			spin_lock_irqsave(&ieee->mgmt_tx_lock, flags2);
-			ieee80211_sta_ps_send_null_frame(ieee, 0);
-			spin_unlock_irqrestore(&ieee->mgmt_tx_lock, flags2);
-		}
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-inline int ieee80211_rx_frame_softmac(struct ieee80211_device *ieee,
-				      struct sk_buff *skb,
-				      struct ieee80211_rx_stats *rx_stats,
-				      u16 type,	u16 stype)
-{
-	struct ieee80211_hdr_3addr *header = (struct ieee80211_hdr_3addr *) skb->data;
-	u16 errcode;
-	u8 *challenge = NULL;
-	int chlen = 0;
-	int aid = 0;
-	struct ieee80211_assoc_response_frame *assoc_resp;
-	struct ieee80211_info_element *info_element;
-
-	if (!ieee->proto_started)
-		return 0;
-
-	if (ieee->sta_sleep || (ieee->ps != IEEE80211_PS_DISABLED &&
-		ieee->iw_mode == IW_MODE_INFRA &&
-		ieee->state == IEEE80211_LINKED))
-
-		tasklet_schedule(&ieee->ps_task);
-
-	if (WLAN_FC_GET_STYPE(header->frame_control) != IEEE80211_STYPE_PROBE_RESP &&
-		WLAN_FC_GET_STYPE(header->frame_control) != IEEE80211_STYPE_BEACON)
-		ieee->last_rx_ps_time = jiffies;
-
-	switch (WLAN_FC_GET_STYPE(header->frame_control)) {
-		case IEEE80211_STYPE_ASSOC_RESP:
-		case IEEE80211_STYPE_REASSOC_RESP:
-			IEEE80211_DEBUG_MGMT("received [RE]ASSOCIATION RESPONSE (%d)\n",
-					WLAN_FC_GET_STYPE(header->frame_ctl));
-			if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
-				ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATED &&
-				ieee->iw_mode == IW_MODE_INFRA) {
-				errcode = assoc_parse(skb, &aid);
-				if (0 == errcode) {
-					u16 left;
-
-					ieee->state = IEEE80211_LINKED;
-					ieee->assoc_id = aid;
-					ieee->softmac_stats.rx_ass_ok++;
-					/* card type is 8187 */
-					if (1 == rx_stats->nic_type)
-						goto associate_complete;
-
-					assoc_resp = (struct ieee80211_assoc_response_frame *)skb->data;
-					info_element = &assoc_resp->info_element;
-					left = skb->len - ((void *)info_element - (void *)assoc_resp);
-
-					while (left >= sizeof(struct ieee80211_info_element_hdr)) {
-						if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
-							printk(KERN_WARNING "[re]associate response error!");
-							return 1;
-						}
-						switch (info_element->id) {
-						  case MFIE_TYPE_GENERIC:
-							IEEE80211_DEBUG_SCAN("MFIE_TYPE_GENERIC: %d bytes\n", info_element->len);
-							if (info_element->len >= 8  &&
-							    info_element->data[0] == 0x00 &&
-							    info_element->data[1] == 0x50 &&
-							    info_element->data[2] == 0xf2 &&
-							    info_element->data[3] == 0x02 &&
-							    info_element->data[4] == 0x01) {
-								/* Not care about version at present.
-								 * WMM Parameter Element.
-								 */
-								memcpy(ieee->current_network.wmm_param, (u8 *)(info_element->data\
-									+ 8), (info_element->len - 8));
-
-								if (((ieee->current_network.wmm_info^info_element->data[6])& \
-										    0x0f) || (!ieee->init_wmmparam_flag)) {
-									/* refresh parameter element for current network
-									 * update the register parameter for hardware.
-									 */
-									ieee->init_wmmparam_flag = 1;
-									queue_work(ieee->wq, &ieee->wmm_param_update_wq);
-								}
-								/* update info_element for current network */
-								ieee->current_network.wmm_info  = info_element->data[6];
-							}
-							break;
-						  default:
-							/* nothing to do at present!!! */
-							break;
-						}
-
-						left -= sizeof(struct ieee80211_info_element_hdr) +
-							info_element->len;
-						info_element = (struct ieee80211_info_element *)
-							&info_element->data[info_element->len];
-					}
-					/* legacy AP, reset the AC_xx_param register */
-					if (!ieee->init_wmmparam_flag) {
-						queue_work(ieee->wq, &ieee->wmm_param_update_wq);
-						ieee->init_wmmparam_flag = 1; /* indicate AC_xx_param upated since last associate */
-					}
-associate_complete:
-					ieee80211_associate_complete(ieee);
-				} else {
-					ieee->softmac_stats.rx_ass_err++;
-					IEEE80211_DEBUG_MGMT(
-						"Association response status code 0x%x\n",
-						errcode);
-					ieee80211_associate_abort(ieee);
-				}
-			}
-			break;
-		case IEEE80211_STYPE_ASSOC_REQ:
-		case IEEE80211_STYPE_REASSOC_REQ:
-			if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
-				ieee->iw_mode == IW_MODE_MASTER)
-
-				ieee80211_rx_assoc_rq(ieee, skb);
-			break;
-		case IEEE80211_STYPE_AUTH:
-			if (ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) {
-				if (ieee->state == IEEE80211_ASSOCIATING_AUTHENTICATING &&
-				ieee->iw_mode == IW_MODE_INFRA){
-						IEEE80211_DEBUG_MGMT("Received authentication response");
-
-						errcode = auth_parse(skb, &challenge, &chlen);
-						if (0 == errcode) {
-							if (ieee->open_wep || !challenge) {
-								ieee->state = IEEE80211_ASSOCIATING_AUTHENTICATED;
-								ieee->softmac_stats.rx_auth_rs_ok++;
-
-								ieee80211_associate_step2(ieee);
-							} else {
-								ieee80211_rtl_auth_challenge(ieee, challenge, chlen);
-							}
-						} else {
-							ieee->softmac_stats.rx_auth_rs_err++;
-							IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x", errcode);
-							ieee80211_associate_abort(ieee);
-						}
-
-					} else if (ieee->iw_mode == IW_MODE_MASTER) {
-						ieee80211_rx_auth_rq(ieee, skb);
-					}
-				}
-			break;
-		case IEEE80211_STYPE_PROBE_REQ:
-			if ((ieee->softmac_features & IEEE_SOFTMAC_PROBERS) &&
-				((ieee->iw_mode == IW_MODE_ADHOC ||
-				ieee->iw_mode == IW_MODE_MASTER) &&
-				ieee->state == IEEE80211_LINKED))
-
-				ieee80211_rx_probe_rq(ieee, skb);
-			break;
-		case IEEE80211_STYPE_DISASSOC:
-		case IEEE80211_STYPE_DEAUTH:
-			/* FIXME for now repeat all the association procedure
-			 * both for disassociation and deauthentication
-			 */
-			if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
-				(ieee->state == IEEE80211_LINKED) &&
-				(ieee->iw_mode == IW_MODE_INFRA) &&
-				(!memcmp(header->addr2, ieee->current_network.bssid, ETH_ALEN))) {
-				ieee->state = IEEE80211_ASSOCIATING;
-				ieee->softmac_stats.reassoc++;
-
-				queue_work(ieee->wq, &ieee->associate_procedure_wq);
-			}
-			break;
-		default:
-			return -1;
-			break;
-	}
-	return 0;
-}
-
-/* following are for a simpler TX queue management.
- * Instead of using netif_[stop/wake]_queue the driver
- * will uses these two function (plus a reset one), that
- * will internally uses the kernel netif_* and takes
- * care of the ieee802.11 fragmentation.
- * So the driver receives a fragment per time and might
- * call the stop function when it want without take care
- * to have enough room to TX an entire packet.
- * This might be useful if each fragment need it's own
- * descriptor, thus just keep a total free memory > than
- * the max fragmentation threshold is not enough.. If the
- * ieee802.11 stack passed a TXB struct then you needed
- * to keep N free descriptors where
- * N = MAX_PACKET_SIZE / MIN_FRAG_TRESHOLD
- * In this way you need just one and the 802.11 stack
- * will take care of buffering fragments and pass them to
- * to the driver later, when it wakes the queue.
- */
-
-void ieee80211_softmac_xmit(struct ieee80211_txb *txb,
-			    struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	int  i;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	/* called with 2nd parm 0, no tx mgmt lock required */
-	ieee80211_sta_wakeup(ieee, 0);
-
-	for (i = 0; i < txb->nr_frags; i++) {
-		if (ieee->queue_stop) {
-			ieee->tx_pending.txb = txb;
-			ieee->tx_pending.frag = i;
-			goto exit;
-		} else {
-			ieee->softmac_data_hard_start_xmit(
-				txb->fragments[i],
-				ieee->dev, ieee->rate);
-			ieee->stats.tx_packets++;
-			ieee->stats.tx_bytes += txb->fragments[i]->len;
-			ieee->dev->trans_start = jiffies;
-		}
-	}
-
-	ieee80211_txb_free(txb);
-
-	exit:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-/* called with ieee->lock acquired */
-static void ieee80211_resume_tx(struct ieee80211_device *ieee)
-{
-	int i;
-	for (i = ieee->tx_pending.frag; i < ieee->tx_pending.txb->nr_frags; i++) {
-
-		if (ieee->queue_stop) {
-			ieee->tx_pending.frag = i;
-			return;
-		} else {
-			ieee->softmac_data_hard_start_xmit(
-				ieee->tx_pending.txb->fragments[i],
-				ieee->dev, ieee->rate);
-			ieee->stats.tx_packets++;
-			ieee->dev->trans_start = jiffies;
-		}
-	}
-
-	ieee80211_txb_free(ieee->tx_pending.txb);
-	ieee->tx_pending.txb = NULL;
-}
-
-void ieee80211_reset_queue(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	init_mgmt_queue(ieee);
-	if (ieee->tx_pending.txb) {
-		ieee80211_txb_free(ieee->tx_pending.txb);
-		ieee->tx_pending.txb = NULL;
-	}
-	ieee->queue_stop = 0;
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-void ieee80211_rtl_wake_queue(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	struct sk_buff *skb;
-	struct ieee80211_hdr_3addr  *header;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-	if (!ieee->queue_stop)
-		goto exit;
-
-	ieee->queue_stop = 0;
-
-	if (ieee->softmac_features & IEEE_SOFTMAC_SINGLE_QUEUE) {
-		while (!ieee->queue_stop && (skb = dequeue_mgmt(ieee))) {
-			header = (struct ieee80211_hdr_3addr  *) skb->data;
-
-			header->seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-			if (ieee->seq_ctrl[0] == 0xFFF)
-				ieee->seq_ctrl[0] = 0;
-			else
-				ieee->seq_ctrl[0]++;
-
-			ieee->softmac_data_hard_start_xmit(skb, ieee->dev, ieee->basic_rate);
-			dev_kfree_skb_any(skb);
-		}
-	}
-	if (!ieee->queue_stop && ieee->tx_pending.txb)
-		ieee80211_resume_tx(ieee);
-
-	if (!ieee->queue_stop && netif_queue_stopped(ieee->dev)) {
-		ieee->softmac_stats.swtxawake++;
-		netif_wake_queue(ieee->dev);
-	}
-exit:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-void ieee80211_rtl_stop_queue(struct ieee80211_device *ieee)
-{
-	if (!netif_queue_stopped(ieee->dev)) {
-		netif_stop_queue(ieee->dev);
-		ieee->softmac_stats.swtxstop++;
-	}
-	ieee->queue_stop = 1;
-}
-
-inline void ieee80211_randomize_cell(struct ieee80211_device *ieee)
-{
-	random_ether_addr(ieee->current_network.bssid);
-}
-
-/* called in user context only */
-void ieee80211_start_master_bss(struct ieee80211_device *ieee)
-{
-	ieee->assoc_id = 1;
-
-	if (ieee->current_network.ssid_len == 0) {
-		strncpy(ieee->current_network.ssid,
-			IEEE80211_DEFAULT_TX_ESSID,
-			IW_ESSID_MAX_SIZE);
-
-		ieee->current_network.ssid_len = strlen(IEEE80211_DEFAULT_TX_ESSID);
-		ieee->ssid_set = 1;
-	}
-
-	memcpy(ieee->current_network.bssid, ieee->dev->dev_addr, ETH_ALEN);
-
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-	ieee->state = IEEE80211_LINKED;
-	ieee->link_change(ieee->dev);
-	notify_wx_assoc_event(ieee);
-
-	if (ieee->data_hard_resume)
-		ieee->data_hard_resume(ieee->dev);
-
-	netif_carrier_on(ieee->dev);
-}
-
-static void ieee80211_start_monitor_mode(struct ieee80211_device *ieee)
-{
-	if (ieee->raw_tx) {
-
-		if (ieee->data_hard_resume)
-			ieee->data_hard_resume(ieee->dev);
-
-		netif_carrier_on(ieee->dev);
-	}
-}
-
-static void ieee80211_start_ibss_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, start_ibss_wq);
-
-	/* iwconfig mode ad-hoc will schedule this and return
-	 * on the other hand this will block further iwconfig SET
-	 * operations because of the wx_sem hold.
-	 * Anyway some most set operations set a flag to speed-up
-	 * (abort) this wq (when syncro scanning) before sleeping
-	 * on the semaphore
-	 */
-
-	down(&ieee->wx_sem);
-
-	if (ieee->current_network.ssid_len == 0) {
-		strcpy(ieee->current_network.ssid, IEEE80211_DEFAULT_TX_ESSID);
-		ieee->current_network.ssid_len = strlen(IEEE80211_DEFAULT_TX_ESSID);
-		ieee->ssid_set = 1;
-	}
-
-	/* check if we have this cell in our network list */
-	ieee80211_softmac_check_all_nets(ieee);
-
-	if (ieee->state == IEEE80211_NOLINK)
-		ieee->current_network.channel = 10;
-	/* if not then the state is not linked. Maybe the user switched to
-	 * ad-hoc mode just after being in monitor mode, or just after
-	 * being very few time in managed mode (so the card have had no
-	 * time to scan all the chans..) or we have just run up the iface
-	 * after setting ad-hoc mode. So we have to give another try..
-	 * Here, in ibss mode, should be safe to do this without extra care
-	 * (in bss mode we had to make sure no-one tried to associate when
-	 * we had just checked the ieee->state and we was going to start the
-	 * scan) because in ibss mode the ieee80211_new_net function, when
-	 * finds a good net, just set the ieee->state to IEEE80211_LINKED,
-	 * so, at worst, we waste a bit of time to initiate an unneeded syncro
-	 * scan, that will stop at the first round because it sees the state
-	 * associated.
-	 */
-	if (ieee->state == IEEE80211_NOLINK)
-		ieee80211_start_scan_syncro(ieee);
-
-	/* the network definitively is not here.. create a new cell */
-	if (ieee->state == IEEE80211_NOLINK) {
-		printk("creating new IBSS cell\n");
-		if (!ieee->wap_set)
-			ieee80211_randomize_cell(ieee);
-
-		if (ieee->modulation & IEEE80211_CCK_MODULATION) {
-			ieee->current_network.rates_len = 4;
-
-			ieee->current_network.rates[0] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
-			ieee->current_network.rates[1] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
-			ieee->current_network.rates[2] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
-			ieee->current_network.rates[3] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
-
-		} else
-			ieee->current_network.rates_len = 0;
-
-		if (ieee->modulation & IEEE80211_OFDM_MODULATION) {
-			ieee->current_network.rates_ex_len = 8;
-
-			ieee->current_network.rates_ex[0] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
-			ieee->current_network.rates_ex[1] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
-			ieee->current_network.rates_ex[2] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
-			ieee->current_network.rates_ex[3] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
-			ieee->current_network.rates_ex[4] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
-			ieee->current_network.rates_ex[5] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
-			ieee->current_network.rates_ex[6] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
-			ieee->current_network.rates_ex[7] = IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
-
-			ieee->rate = 540;
-		} else {
-			ieee->current_network.rates_ex_len = 0;
-			ieee->rate = 110;
-		}
-
-		/* By default, WMM function will be disabled in IBSS mode */
-		ieee->current_network.QoS_Enable = 0;
-
-		ieee->current_network.atim_window = 0;
-		ieee->current_network.capability = WLAN_CAPABILITY_IBSS;
-		if (ieee->short_slot)
-			ieee->current_network.capability |= WLAN_CAPABILITY_SHORT_SLOT;
-	}
-
-	ieee->state = IEEE80211_LINKED;
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-	ieee->link_change(ieee->dev);
-
-	notify_wx_assoc_event(ieee);
-
-	ieee80211_start_send_beacons(ieee);
-	printk(KERN_WARNING "after sending beacon packet!\n");
-
-	if (ieee->data_hard_resume)
-		ieee->data_hard_resume(ieee->dev);
-
-	netif_carrier_on(ieee->dev);
-
-	up(&ieee->wx_sem);
-}
-
-inline void ieee80211_start_ibss(struct ieee80211_device *ieee)
-{
-	queue_delayed_work(ieee->wq, &ieee->start_ibss_wq, 100);
-}
-
-/* this is called only in user context, with wx_sem held */
-void ieee80211_start_bss(struct ieee80211_device *ieee)
-{
-	unsigned long flags;
-	/* Ref: 802.11d 11.1.3.3
-	 * STA shall not start a BSS unless properly formed Beacon frame
-	 * including a Country IE.
-	 */
-	if (IS_DOT11D_ENABLE(ieee) && !IS_COUNTRY_IE_VALID(ieee)) {
-		if (!ieee->bGlobalDomain)
-			return;
-	}
-	/* check if we have already found the net we are interested in (if any).
-	 * if not (we are disassociated and we are not
-	 * in associating / authenticating phase) start the background scanning.
-	 */
-	ieee80211_softmac_check_all_nets(ieee);
-
-	/* ensure no-one start an associating process (thus setting
-	 * the ieee->state to ieee80211_ASSOCIATING) while we
-	 * have just cheked it and we are going to enable scan.
-	 * The ieee80211_new_net function is always called with
-	 * lock held (from both ieee80211_softmac_check_all_nets and
-	 * the rx path), so we cannot be in the middle of such function
-	 */
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (ieee->state == IEEE80211_NOLINK) {
-		ieee->actscanning = true;
-		ieee80211_rtl_start_scan(ieee);
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-}
-
-/* called only in userspace context */
-void ieee80211_disassociate(struct ieee80211_device *ieee)
-{
-	netif_carrier_off(ieee->dev);
-
-	if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)
-			ieee80211_reset_queue(ieee);
-
-	if (ieee->data_hard_stop)
-			ieee->data_hard_stop(ieee->dev);
-
-	if (IS_DOT11D_ENABLE(ieee))
-		Dot11d_Reset(ieee);
-
-	ieee->link_change(ieee->dev);
-	if (ieee->state == IEEE80211_LINKED)
-		notify_wx_assoc_event(ieee);
-	ieee->state = IEEE80211_NOLINK;
-
-}
-static void ieee80211_associate_retry_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, associate_retry_wq);
-	unsigned long flags;
-	down(&ieee->wx_sem);
-	if (!ieee->proto_started)
-		goto exit;
-	if (ieee->state != IEEE80211_ASSOCIATING_RETRY)
-		goto exit;
-	/* until we do not set the state to IEEE80211_NOLINK
-	* there are no possibility to have someone else trying
-	* to start an association procedure (we get here with
-	* ieee->state = IEEE80211_ASSOCIATING).
-	* When we set the state to IEEE80211_NOLINK it is possible
-	* that the RX path run an attempt to associate, but
-	* both ieee80211_softmac_check_all_nets and the
-	* RX path works with ieee->lock held so there are no
-	* problems. If we are still disassociated then start a scan.
-	* the lock here is necessary to ensure no one try to start
-	* an association procedure when we have just checked the
-	* state and we are going to start the scan.
-	*/
-	ieee->state = IEEE80211_NOLINK;
-	ieee->beinretry = true;
-	ieee80211_softmac_check_all_nets(ieee);
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (ieee->state == IEEE80211_NOLINK) {
-		ieee->beinretry = false;
-		ieee->actscanning = true;
-		ieee80211_rtl_start_scan(ieee);
-	}
-	if (ieee->state == IEEE80211_NOLINK)
-		notify_wx_assoc_event(ieee);
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-exit:
-	up(&ieee->wx_sem);
-}
-
-struct sk_buff *ieee80211_get_beacon_(struct ieee80211_device *ieee)
-{
-	u8 broadcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
-	struct sk_buff *skb = NULL;
-	struct ieee80211_probe_response *b;
-
-	skb = ieee80211_probe_resp(ieee, broadcast_addr);
-	if (!skb)
-		return NULL;
-
-	b = (struct ieee80211_probe_response *) skb->data;
-	b->header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_BEACON);
-
-	return skb;
-}
-
-struct sk_buff *ieee80211_get_beacon(struct ieee80211_device *ieee)
-{
-	struct sk_buff *skb;
-	struct ieee80211_probe_response *b;
-
-	skb = ieee80211_get_beacon_(ieee);
-	if (!skb)
-		return NULL;
-
-	b = (struct ieee80211_probe_response *) skb->data;
-	b->header.seq_ctrl = cpu_to_le16(ieee->seq_ctrl[0] << 4);
-
-	if (ieee->seq_ctrl[0] == 0xFFF)
-		ieee->seq_ctrl[0] = 0;
-	else
-		ieee->seq_ctrl[0]++;
-
-	return skb;
-}
-
-void ieee80211_softmac_stop_protocol(struct ieee80211_device *ieee)
-{
-	ieee->sync_scan_hurryup = 1;
-	down(&ieee->wx_sem);
-	ieee80211_stop_protocol(ieee);
-	up(&ieee->wx_sem);
-}
-
-void ieee80211_stop_protocol(struct ieee80211_device *ieee)
-{
-	if (!ieee->proto_started)
-		return;
-
-	ieee->proto_started = 0;
-
-	ieee80211_stop_send_beacons(ieee);
-	if ((ieee->iw_mode == IW_MODE_INFRA) && (ieee->state == IEEE80211_LINKED))
-		SendDisassociation(ieee, NULL, WLAN_REASON_DISASSOC_STA_HAS_LEFT);
-
-	del_timer_sync(&ieee->associate_timer);
-	cancel_delayed_work(&ieee->associate_retry_wq);
-	cancel_delayed_work(&ieee->start_ibss_wq);
-	ieee80211_stop_scan(ieee);
-
-	ieee80211_disassociate(ieee);
-}
-
-void ieee80211_softmac_start_protocol(struct ieee80211_device *ieee)
-{
-	ieee->sync_scan_hurryup = 0;
-	down(&ieee->wx_sem);
-	ieee80211_start_protocol(ieee);
-	up(&ieee->wx_sem);
-}
-
-void ieee80211_start_protocol(struct ieee80211_device *ieee)
-{
-	short ch = 0;
-	int i = 0;
-
-	if (ieee->proto_started)
-		return;
-
-	ieee->proto_started = 1;
-
-	if (ieee->current_network.channel == 0) {
-		do {
-			ch++;
-			if (ch > MAX_CHANNEL_NUMBER)
-				return; /* no channel found */
-
-		} while (!GET_DOT11D_INFO(ieee)->channel_map[ch]);
-
-		ieee->current_network.channel = ch;
-	}
-
-	if (ieee->current_network.beacon_interval == 0)
-		ieee->current_network.beacon_interval = 100;
-	ieee->set_chan(ieee->dev, ieee->current_network.channel);
-
-	for (i = 0; i < 17; i++) {
-		ieee->last_rxseq_num[i] = -1;
-		ieee->last_rxfrag_num[i] = -1;
-		ieee->last_packet_time[i] = 0;
-	}
-
-	ieee->init_wmmparam_flag = 0; /* reinitialize AC_xx_PARAM registers. */
-
-	/* if the user set the MAC of the ad-hoc cell and then
-	 * switch to managed mode, shall we  make sure that association
-	 * attempts does not fail just because the user provide the essid
-	 * and the nic is still checking for the AP MAC ??
-	 */
-	switch (ieee->iw_mode) {
-		case IW_MODE_AUTO:
-			ieee->iw_mode = IW_MODE_INFRA;
-			/* not set break here intentionly */
-		case IW_MODE_INFRA:
-			ieee80211_start_bss(ieee);
-			break;
-
-		case IW_MODE_ADHOC:
-			ieee80211_start_ibss(ieee);
-			break;
-
-		case IW_MODE_MASTER:
-			ieee80211_start_master_bss(ieee);
-		break;
-
-		case IW_MODE_MONITOR:
-			ieee80211_start_monitor_mode(ieee);
-			break;
-
-		default:
-			ieee->iw_mode = IW_MODE_INFRA;
-			ieee80211_start_bss(ieee);
-			break;
-	}
-}
-
-#define DRV_NAME  "Ieee80211"
-void ieee80211_softmac_init(struct ieee80211_device *ieee)
-{
-	int i;
-	memset(&ieee->current_network, 0, sizeof(struct ieee80211_network));
-
-	ieee->state = IEEE80211_NOLINK;
-	ieee->sync_scan_hurryup = 0;
-	for (i = 0; i < 5; i++)
-		ieee->seq_ctrl[i] = 0;
-
-	ieee->assoc_id = 0;
-	ieee->queue_stop = 0;
-	ieee->scanning = 0;
-	ieee->softmac_features = 0; /* so IEEE2100-like driver are happy */
-	ieee->wap_set = 0;
-	ieee->ssid_set = 0;
-	ieee->proto_started = 0;
-	ieee->basic_rate = IEEE80211_DEFAULT_BASIC_RATE;
-	ieee->rate = 3;
-	ieee->ps = IEEE80211_PS_MBCAST|IEEE80211_PS_UNICAST;
-	ieee->sta_sleep = 0;
-	ieee->bInactivePs = false;
-	ieee->actscanning = false;
-	ieee->ListenInterval = 2;
-	ieee->NumRxDataInPeriod = 0;
-	ieee->NumRxBcnInPeriod = 0;
-	ieee->NumRxOkTotal = 0;
-	ieee->NumRxUnicast = 0; /* for keep alive */
-	ieee->beinretry = false;
-	ieee->bHwRadioOff = false;
-
-	init_mgmt_queue(ieee);
-
-	ieee->tx_pending.txb = NULL;
-
-	init_timer(&ieee->associate_timer);
-	ieee->associate_timer.data = (unsigned long)ieee;
-	ieee->associate_timer.function = ieee80211_associate_abort_cb;
-
-	init_timer(&ieee->beacon_timer);
-	ieee->beacon_timer.data = (unsigned long) ieee;
-	ieee->beacon_timer.function = ieee80211_send_beacon_cb;
-
-	ieee->wq = create_workqueue(DRV_NAME);
-
-	INIT_DELAYED_WORK(&ieee->start_ibss_wq, (void *) ieee80211_start_ibss_wq);
-	INIT_WORK(&ieee->associate_complete_wq, (void *) ieee80211_associate_complete_wq);
-	INIT_WORK(&ieee->associate_procedure_wq, (void *) ieee80211_associate_procedure_wq);
-	INIT_DELAYED_WORK(&ieee->softmac_scan_wq, (void *) ieee80211_softmac_scan_wq);
-	INIT_DELAYED_WORK(&ieee->associate_retry_wq, (void *) ieee80211_associate_retry_wq);
-	INIT_WORK(&ieee->wx_sync_scan_wq, (void *) ieee80211_wx_sync_scan_wq);
-
-	sema_init(&ieee->wx_sem, 1);
-	sema_init(&ieee->scan_sem, 1);
-
-	spin_lock_init(&ieee->mgmt_tx_lock);
-	spin_lock_init(&ieee->beacon_lock);
-
-	tasklet_init(&ieee->ps_task,
-	     (void(*)(unsigned long)) ieee80211_sta_ps,
-	     (unsigned long)ieee);
-	ieee->pDot11dInfo = kmalloc(sizeof(RT_DOT11D_INFO), GFP_ATOMIC);
-}
-
-void ieee80211_softmac_free(struct ieee80211_device *ieee)
-{
-	down(&ieee->wx_sem);
-
-	del_timer_sync(&ieee->associate_timer);
-	cancel_delayed_work(&ieee->associate_retry_wq);
-
-	/* add for RF power on power of */
-	cancel_delayed_work(&ieee->GPIOChangeRFWorkItem);
-
-	destroy_workqueue(ieee->wq);
-	kfree(ieee->pDot11dInfo);
-	up(&ieee->wx_sem);
-}
-
-/* Start of WPA code. This is stolen from the ipw2200 driver  */
-static int ieee80211_wpa_enable(struct ieee80211_device *ieee, int value)
-{
-	/* This is called when wpa_supplicant loads and closes the driver
-	 * interface. */
-	printk("%s WPA\n", value ? "enabling" : "disabling");
-	ieee->wpa_enabled = value;
-	return 0;
-}
-
-static void ieee80211_wpa_assoc_frame(struct ieee80211_device *ieee, char *wpa_ie,
-			       int wpa_ie_len)
-{
-	/* make sure WPA is enabled */
-	ieee80211_wpa_enable(ieee, 1);
-
-	ieee80211_disassociate(ieee);
-}
-
-static int ieee80211_wpa_mlme(struct ieee80211_device *ieee, int command,
-			      int reason)
-{
-	int ret = 0;
-
-	switch (command) {
-	case IEEE_MLME_STA_DEAUTH:
-		/* silently ignore */
-		break;
-
-	case IEEE_MLME_STA_DISASSOC:
-		ieee80211_disassociate(ieee);
-		break;
-
-	default:
-		printk("Unknown MLME request: %d\n", command);
-		ret = -EOPNOTSUPP;
-	}
-
-	return ret;
-}
-
-static int ieee80211_wpa_set_wpa_ie(struct ieee80211_device *ieee,
-				    struct ieee_param *param, int plen)
-{
-	u8 *buf;
-
-	if (param->u.wpa_ie.len > MAX_WPA_IE_LEN ||
-	    (param->u.wpa_ie.len && param->u.wpa_ie.data == NULL))
-		return -EINVAL;
-
-	if (param->u.wpa_ie.len) {
-		buf = kmemdup(param->u.wpa_ie.data, param->u.wpa_ie.len,
-			      GFP_KERNEL);
-		if (buf == NULL)
-			return -ENOMEM;
-
-		kfree(ieee->wpa_ie);
-		ieee->wpa_ie = buf;
-		ieee->wpa_ie_len = param->u.wpa_ie.len;
-	} else {
-		kfree(ieee->wpa_ie);
-		ieee->wpa_ie = NULL;
-		ieee->wpa_ie_len = 0;
-	}
-
-	ieee80211_wpa_assoc_frame(ieee, ieee->wpa_ie, ieee->wpa_ie_len);
-	return 0;
-}
-
-#define AUTH_ALG_OPEN_SYSTEM			0x1
-#define AUTH_ALG_SHARED_KEY			0x2
-
-static int ieee80211_wpa_set_auth_algs(struct ieee80211_device *ieee, int value)
-{
-	struct ieee80211_security sec = {
-		.flags = SEC_AUTH_MODE,
-	};
-	int ret = 0;
-
-	if (value & AUTH_ALG_SHARED_KEY) {
-		sec.auth_mode = WLAN_AUTH_SHARED_KEY;
-		ieee->open_wep = 0;
-	} else {
-		sec.auth_mode = WLAN_AUTH_OPEN;
-		ieee->open_wep = 1;
-	}
-
-	if (ieee->set_security)
-		ieee->set_security(ieee->dev, &sec);
-	else
-		ret = -EOPNOTSUPP;
-
-	return ret;
-}
-
-static int ieee80211_wpa_set_param(struct ieee80211_device *ieee, u8 name,
-				   u32 value)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	switch (name) {
-	case IEEE_PARAM_WPA_ENABLED:
-		ret = ieee80211_wpa_enable(ieee, value);
-		break;
-
-	case IEEE_PARAM_TKIP_COUNTERMEASURES:
-		ieee->tkip_countermeasures = value;
-		break;
-
-	case IEEE_PARAM_DROP_UNENCRYPTED: {
-		/* HACK:
-		 *
-		 * wpa_supplicant calls set_wpa_enabled when the driver
-		 * is loaded and unloaded, regardless of if WPA is being
-		 * used.  No other calls are made which can be used to
-		 * determine if encryption will be used or not prior to
-		 * association being expected.  If encryption is not being
-		 * used, drop_unencrypted is set to false, else true -- we
-		 * can use this to determine if the CAP_PRIVACY_ON bit should
-		 * be set.
-		 */
-		struct ieee80211_security sec = {
-			.flags = SEC_ENABLED,
-			.enabled = value,
-		};
-		ieee->drop_unencrypted = value;
-		/* We only change SEC_LEVEL for open mode. Others
-		 * are set by ipw_wpa_set_encryption.
-		 */
-		if (!value) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_0;
-		} else {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_1;
-		}
-		if (ieee->set_security)
-			ieee->set_security(ieee->dev, &sec);
-		break;
-	}
-
-	case IEEE_PARAM_PRIVACY_INVOKED:
-		ieee->privacy_invoked = value;
-		break;
-	case IEEE_PARAM_AUTH_ALGS:
-		ret = ieee80211_wpa_set_auth_algs(ieee, value);
-		break;
-	case IEEE_PARAM_IEEE_802_1X:
-		ieee->ieee802_1x = value;
-		break;
-	case IEEE_PARAM_WPAX_SELECT:
-		spin_lock_irqsave(&ieee->wpax_suitlist_lock, flags);
-		ieee->wpax_type_set = 1;
-		ieee->wpax_type_notify = value;
-		spin_unlock_irqrestore(&ieee->wpax_suitlist_lock, flags);
-		break;
-	default:
-		printk("Unknown WPA param: %d\n", name);
-		ret = -EOPNOTSUPP;
-	}
-
-	return ret;
-}
-
-/* implementation borrowed from hostap driver */
-
-static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
-					struct ieee_param *param, int param_len)
-{
-	int ret = 0;
-
-	struct ieee80211_crypto_ops *ops;
-	struct ieee80211_crypt_data **crypt;
-
-	struct ieee80211_security sec = {
-		.flags = 0,
-	};
-
-	param->u.crypt.err = 0;
-	param->u.crypt.alg[IEEE_CRYPT_ALG_NAME_LEN - 1] = '\0';
-
-	if (param_len !=
-	    (int) ((char *) param->u.crypt.key - (char *) param) +
-	    param->u.crypt.key_len) {
-		printk("Len mismatch %d, %d\n", param_len,
-			       param->u.crypt.key_len);
-		return -EINVAL;
-	}
-	if (is_broadcast_ether_addr(param->sta_addr)) {
-		if (param->u.crypt.idx >= WEP_KEYS)
-			return -EINVAL;
-		crypt = &ieee->crypt[param->u.crypt.idx];
-	} else {
-		return -EINVAL;
-	}
-
-	if (strcmp(param->u.crypt.alg, "none") == 0) {
-		if (crypt) {
-			sec.enabled = 0;
-			/* FIXME FIXME */
-			sec.level = SEC_LEVEL_0;
-			sec.flags |= SEC_ENABLED | SEC_LEVEL;
-			ieee80211_crypt_delayed_deinit(ieee, crypt);
-		}
-		goto done;
-	}
-	sec.enabled = 1;
-	/* FIXME FIXME */
-	sec.flags |= SEC_ENABLED;
-
-	/* IPW HW cannot build TKIP MIC, host decryption still needed. */
-	if (!(ieee->host_encrypt || ieee->host_decrypt) &&
-	    strcmp(param->u.crypt.alg, "TKIP"))
-		goto skip_host_crypt;
-
-	ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0)
-		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0)
-		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0)
-		ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
-	if (ops == NULL) {
-		printk("unknown crypto alg '%s'\n", param->u.crypt.alg);
-		param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
-		ret = -EINVAL;
-		goto done;
-	}
-
-	if (*crypt == NULL || (*crypt)->ops != ops) {
-		struct ieee80211_crypt_data *new_crypt;
-
-		ieee80211_crypt_delayed_deinit(ieee, crypt);
-
-		new_crypt = kmalloc(sizeof(*new_crypt), GFP_KERNEL);
-		if (new_crypt == NULL) {
-			ret = -ENOMEM;
-			goto done;
-		}
-		memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
-		new_crypt->ops = ops;
-		if (new_crypt->ops)
-			new_crypt->priv =
-				new_crypt->ops->init(param->u.crypt.idx);
-
-		if (new_crypt->priv == NULL) {
-			kfree(new_crypt);
-			param->u.crypt.err = IEEE_CRYPT_ERR_CRYPT_INIT_FAILED;
-			ret = -EINVAL;
-			goto done;
-		}
-
-		*crypt = new_crypt;
-	}
-
-	if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key &&
-	    (*crypt)->ops->set_key(param->u.crypt.key,
-				   param->u.crypt.key_len, param->u.crypt.seq,
-				   (*crypt)->priv) < 0) {
-		printk("key setting failed\n");
-		param->u.crypt.err = IEEE_CRYPT_ERR_KEY_SET_FAILED;
-		ret = -EINVAL;
-		goto done;
-	}
-
- skip_host_crypt:
-	if (param->u.crypt.set_tx) {
-		ieee->tx_keyidx = param->u.crypt.idx;
-		sec.active_key = param->u.crypt.idx;
-		sec.flags |= SEC_ACTIVE_KEY;
-	} else
-		sec.flags &= ~SEC_ACTIVE_KEY;
-
-	if (param->u.crypt.alg != NULL) {
-		memcpy(sec.keys[param->u.crypt.idx],
-		       param->u.crypt.key,
-		       param->u.crypt.key_len);
-		sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len;
-		sec.flags |= (1 << param->u.crypt.idx);
-
-		if (strcmp(param->u.crypt.alg, "WEP") == 0) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_1;
-		} else if (strcmp(param->u.crypt.alg, "TKIP") == 0) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_2;
-		} else if (strcmp(param->u.crypt.alg, "CCMP") == 0) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_3;
-		}
-	}
- done:
-	if (ieee->set_security)
-		ieee->set_security(ieee->dev, &sec);
-
-	/* Do not reset port if card is in Managed mode since resetting will
-	 * generate new IEEE 802.11 authentication which may end up in looping
-	 * with IEEE 802.1X.  If your hardware requires a reset after WEP
-	 * configuration (for example... Prism2), implement the reset_port in
-	 * the callbacks structures used to initialize the 802.11 stack. */
-	if (ieee->reset_on_keychange &&
-	    ieee->iw_mode != IW_MODE_INFRA &&
-	    ieee->reset_port &&
-	    ieee->reset_port(ieee->dev)) {
-		printk("reset_port failed\n");
-		param->u.crypt.err = IEEE_CRYPT_ERR_CARD_CONF_FAILED;
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device *ieee,
-				   struct iw_point *p)
-{
-	struct ieee_param *param;
-	int ret = 0;
-
-	down(&ieee->wx_sem);
-
-	if (p->length < sizeof(struct ieee_param) || !p->pointer) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	param = memdup_user(p->pointer, p->length);
-	if (IS_ERR(param)) {
-		ret = PTR_ERR(param);
-		goto out;
-	}
-
-	switch (param->cmd) {
-	case IEEE_CMD_SET_WPA_PARAM:
-		ret = ieee80211_wpa_set_param(ieee, param->u.wpa_param.name,
-					param->u.wpa_param.value);
-		break;
-	case IEEE_CMD_SET_WPA_IE:
-		ret = ieee80211_wpa_set_wpa_ie(ieee, param, p->length);
-		break;
-	case IEEE_CMD_SET_ENCRYPTION:
-		ret = ieee80211_wpa_set_encryption(ieee, param, p->length);
-		break;
-	case IEEE_CMD_MLME:
-		ret = ieee80211_wpa_mlme(ieee, param->u.mlme.command,
-				   param->u.mlme.reason_code);
-		break;
-	default:
-		printk("Unknown WPA supplicant request: %d\n", param->cmd);
-		ret = -EOPNOTSUPP;
-		break;
-	}
-
-	if (ret == 0 && copy_to_user(p->pointer, param, p->length))
-		ret = -EFAULT;
-
-	kfree(param);
-out:
-	up(&ieee->wx_sem);
-
-	return ret;
-}
-
-void notify_wx_assoc_event(struct ieee80211_device *ieee)
-{
-	union iwreq_data wrqu;
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	if (ieee->state == IEEE80211_LINKED)
-		memcpy(wrqu.ap_addr.sa_data, ieee->current_network.bssid, ETH_ALEN);
-	else
-		memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
-	wireless_send_event(ieee->dev, SIOCGIWAP, &wrqu, NULL);
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
deleted file mode 100644
index 46f35644126c..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/* IEEE 802.11 SoftMAC layer
- * Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
- *
- * Mostly extracted from the rtl8180-sa2400 driver for the
- * in-kernel generic ieee802.11 stack.
- *
- * Some pieces of code might be stolen from ipw2100 driver
- * copyright of who own it's copyright ;-)
- *
- * PS wx handler mostly stolen from hostap, copyright who
- * own it's copyright ;-)
- *
- * released under the GPL
- */
-
-
-#include <linux/etherdevice.h>
-
-#include "ieee80211.h"
-
-/* FIXME: add A freqs */
-
-const long ieee80211_wlan_frequencies[] = {
-	2412, 2417, 2422, 2427,
-	2432, 2437, 2442, 2447,
-	2452, 2457, 2462, 2467,
-	2472, 2484
-};
-
-
-int ieee80211_wx_set_freq(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-	int ret;
-	struct iw_freq *fwrq = &wrqu->freq;
-//	printk("in %s\n",__func__);
-	down(&ieee->wx_sem);
-
-	if (ieee->iw_mode == IW_MODE_INFRA) {
-		ret = -EOPNOTSUPP;
-		goto out;
-	}
-
-	/* if setting by freq convert to channel */
-	if (fwrq->e == 1) {
-		if ((fwrq->m >= (int) 2.412e8 &&
-		     fwrq->m <= (int) 2.487e8)) {
-			int f = fwrq->m / 100000;
-			int c = 0;
-
-			while ((c < 14) && (f != ieee80211_wlan_frequencies[c]))
-				c++;
-
-			/* hack to fall through */
-			fwrq->e = 0;
-			fwrq->m = c + 1;
-		}
-	}
-
-	if (fwrq->e > 0 || fwrq->m > 14 || fwrq->m < 1) {
-		ret = -EOPNOTSUPP;
-		goto out;
-
-	} else { /* Set the channel */
-
-
-		ieee->current_network.channel = fwrq->m;
-		ieee->set_chan(ieee->dev, ieee->current_network.channel);
-
-		if (ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
-			if (ieee->state == IEEE80211_LINKED) {
-				ieee80211_stop_send_beacons(ieee);
-				ieee80211_start_send_beacons(ieee);
-			}
-	}
-
-	ret = 0;
-out:
-	up(&ieee->wx_sem);
-	return ret;
-}
-
-
-int ieee80211_wx_get_freq(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-	struct iw_freq *fwrq = &wrqu->freq;
-
-	if (ieee->current_network.channel == 0)
-		return -1;
-
-	fwrq->m = ieee->current_network.channel;
-	fwrq->e = 0;
-
-	return 0;
-}
-
-int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
-			 struct iw_request_info *info, union iwreq_data *wrqu,
-			 char *extra)
-{
-	unsigned long flags;
-
-	wrqu->ap_addr.sa_family = ARPHRD_ETHER;
-
-	if (ieee->iw_mode == IW_MODE_MONITOR)
-		return -1;
-
-	/* We want avoid to give to the user inconsistent infos*/
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (ieee->state != IEEE80211_LINKED &&
-		ieee->state != IEEE80211_LINKED_SCANNING &&
-		ieee->wap_set == 0)
-
-		memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
-	else
-		memcpy(wrqu->ap_addr.sa_data,
-		       ieee->current_network.bssid, ETH_ALEN);
-
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-	return 0;
-}
-
-
-int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
-			 struct iw_request_info *info, union iwreq_data *awrq,
-			 char *extra)
-{
-
-	int ret = 0;
-	unsigned long flags;
-
-	short ifup = ieee->proto_started;//dev->flags & IFF_UP;
-	struct sockaddr *temp = (struct sockaddr *)awrq;
-
-	//printk("=======Set WAP:");
-	ieee->sync_scan_hurryup = 1;
-
-	down(&ieee->wx_sem);
-	/* use ifconfig hw ether */
-	if (ieee->iw_mode == IW_MODE_MASTER) {
-		ret = -1;
-		goto out;
-	}
-
-	if (temp->sa_family != ARPHRD_ETHER) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	if (ifup)
-		ieee80211_stop_protocol(ieee);
-
-	/* just to avoid to give inconsistent infos in the
-	 * get wx method. not really needed otherwise
-	 */
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	memcpy(ieee->current_network.bssid, temp->sa_data, ETH_ALEN);
-	ieee->wap_set = !is_zero_ether_addr(temp->sa_data);
-	//printk(" %x:%x:%x:%x:%x:%x\n", ieee->current_network.bssid[0],ieee->current_network.bssid[1],ieee->current_network.bssid[2],ieee->current_network.bssid[3],ieee->current_network.bssid[4],ieee->current_network.bssid[5]);
-
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-	if (ifup)
-		ieee80211_start_protocol(ieee);
-
-out:
-	up(&ieee->wx_sem);
-	return ret;
-}
-
-int ieee80211_wx_get_essid(struct ieee80211_device *ieee,
-			   struct iw_request_info *a, union iwreq_data *wrqu,
-			   char *b)
-{
-	int len, ret = 0;
-	unsigned long flags;
-
-	if (ieee->iw_mode == IW_MODE_MONITOR)
-		return -1;
-
-	/* We want avoid to give to the user inconsistent infos*/
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (ieee->current_network.ssid[0] == '\0' ||
-		ieee->current_network.ssid_len == 0){
-		ret = -1;
-		goto out;
-	}
-
-	if (ieee->state != IEEE80211_LINKED &&
-		ieee->state != IEEE80211_LINKED_SCANNING &&
-		ieee->ssid_set == 0){
-		ret = -1;
-		goto out;
-	}
-	len = ieee->current_network.ssid_len;
-	wrqu->essid.length = len;
-	strncpy(b, ieee->current_network.ssid, len);
-	wrqu->essid.flags = 1;
-
-out:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-	return ret;
-
-}
-
-int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
-			  struct iw_request_info *info, union iwreq_data *wrqu,
-			  char *extra)
-{
-
-	u32 target_rate = wrqu->bitrate.value;
-
-	//added by lizhaoming for auto mode
-	if (target_rate == -1)
-		ieee->rate = 110;
-	else
-		ieee->rate = target_rate/100000;
-
-	//FIXME: we might want to limit rate also in management protocols.
-	return 0;
-}
-
-
-
-int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
-			  struct iw_request_info *info, union iwreq_data *wrqu,
-			  char *extra)
-{
-
-	wrqu->bitrate.value = ieee->rate * 100000;
-
-	return 0;
-}
-
-int ieee80211_wx_set_mode(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-
-	ieee->sync_scan_hurryup = 1;
-
-	down(&ieee->wx_sem);
-
-	if (wrqu->mode == ieee->iw_mode)
-		goto out;
-
-	if (wrqu->mode == IW_MODE_MONITOR)
-		ieee->dev->type = ARPHRD_IEEE80211;
-	else
-		ieee->dev->type = ARPHRD_ETHER;
-
-	if (!ieee->proto_started) {
-		ieee->iw_mode = wrqu->mode;
-	} else {
-		ieee80211_stop_protocol(ieee);
-		ieee->iw_mode = wrqu->mode;
-		ieee80211_start_protocol(ieee);
-	}
-
-out:
-	up(&ieee->wx_sem);
-	return 0;
-}
-
-
-void ieee80211_wx_sync_scan_wq(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq);
-	short chan;
-
-	chan = ieee->current_network.channel;
-
-	if (ieee->data_hard_stop)
-		ieee->data_hard_stop(ieee->dev);
-
-	ieee80211_stop_send_beacons(ieee);
-
-	ieee->state = IEEE80211_LINKED_SCANNING;
-	ieee->link_change(ieee->dev);
-
-	ieee80211_start_scan_syncro(ieee);
-
-	ieee->set_chan(ieee->dev, chan);
-
-	ieee->state = IEEE80211_LINKED;
-	ieee->link_change(ieee->dev);
-
-	if (ieee->data_hard_resume)
-		ieee->data_hard_resume(ieee->dev);
-
-	if (ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
-		ieee80211_start_send_beacons(ieee);
-
-	//YJ,add,080828, In prevent of lossing ping packet during scanning
-	//ieee80211_sta_ps_send_null_frame(ieee, false);
-	//YJ,add,080828,end
-
-	up(&ieee->wx_sem);
-
-}
-
-int ieee80211_wx_set_scan(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-	int ret = 0;
-
-	down(&ieee->wx_sem);
-
-	if (ieee->iw_mode == IW_MODE_MONITOR || !(ieee->proto_started)) {
-		ret = -1;
-		goto out;
-	}
-	//YJ,add,080828
-	//In prevent of lossing ping packet during scanning
-	//ieee80211_sta_ps_send_null_frame(ieee, true);
-	//YJ,add,080828,end
-
-	if (ieee->state == IEEE80211_LINKED) {
-		queue_work(ieee->wq, &ieee->wx_sync_scan_wq);
-		/* intentionally forget to up sem */
-		return 0;
-	}
-
-out:
-	up(&ieee->wx_sem);
-	return ret;
-}
-
-int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
-			   struct iw_request_info *a, union iwreq_data *wrqu,
-			   char *extra)
-{
-
-	int ret = 0, len;
-	short proto_started;
-	unsigned long flags;
-
-	ieee->sync_scan_hurryup = 1;
-
-	down(&ieee->wx_sem);
-
-	proto_started = ieee->proto_started;
-
-	if (wrqu->essid.length > IW_ESSID_MAX_SIZE) {
-		ret = -E2BIG;
-		goto out;
-	}
-
-	if (ieee->iw_mode == IW_MODE_MONITOR) {
-		ret = -1;
-		goto out;
-	}
-
-	if (proto_started)
-		ieee80211_stop_protocol(ieee);
-
-	/* this is just to be sure that the GET wx callback
-	 * has consistent infos. not needed otherwise
-	 */
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (wrqu->essid.flags && wrqu->essid.length) {
-//YJ,modified,080819
-		len = (wrqu->essid.length < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length) : IW_ESSID_MAX_SIZE;
-		memset(ieee->current_network.ssid, 0, ieee->current_network.ssid_len); //YJ,add,080819
-		strncpy(ieee->current_network.ssid, extra, len);
-		ieee->current_network.ssid_len = len;
-		ieee->ssid_set = 1;
-//YJ,modified,080819,end
-
-		//YJ,add,080819,for hidden ap
-		if (len == 0) {
-			memset(ieee->current_network.bssid, 0, ETH_ALEN);
-			ieee->current_network.capability = 0;
-		}
-		//YJ,add,080819,for hidden ap,end
-	} else {
-		ieee->ssid_set = 0;
-		ieee->current_network.ssid[0] = '\0';
-		ieee->current_network.ssid_len = 0;
-	}
-	//printk("==========set essid %s!\n",ieee->current_network.ssid);
-	spin_unlock_irqrestore(&ieee->lock, flags);
-
-	if (proto_started)
-		ieee80211_start_protocol(ieee);
-out:
-	up(&ieee->wx_sem);
-	return ret;
-}
-
-int ieee80211_wx_get_mode(struct ieee80211_device *ieee,
-			  struct iw_request_info *a, union iwreq_data *wrqu,
-			  char *b)
-{
-
-	wrqu->mode = ieee->iw_mode;
-	return 0;
-}
-
-int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
-			   struct iw_request_info *info, union iwreq_data *wrqu,
-			   char *extra)
-{
-
-	int *parms = (int *)extra;
-	int enable = (parms[0] > 0);
-	short prev = ieee->raw_tx;
-
-	down(&ieee->wx_sem);
-
-	if (enable)
-		ieee->raw_tx = 1;
-	else
-		ieee->raw_tx = 0;
-
-	netdev_info(ieee->dev, "raw TX is %s\n",
-		    ieee->raw_tx ? "enabled" : "disabled");
-
-	if (ieee->iw_mode == IW_MODE_MONITOR) {
-		if (prev == 0 && ieee->raw_tx) {
-			if (ieee->data_hard_resume)
-				ieee->data_hard_resume(ieee->dev);
-
-			netif_carrier_on(ieee->dev);
-		}
-
-		if (prev && ieee->raw_tx == 1)
-			netif_carrier_off(ieee->dev);
-	}
-
-	up(&ieee->wx_sem);
-
-	return 0;
-}
-
-int ieee80211_wx_get_name(struct ieee80211_device *ieee,
-			  struct iw_request_info *info, union iwreq_data *wrqu,
-			  char *extra)
-{
-	strlcpy(wrqu->name, "802.11", IFNAMSIZ);
-	if (ieee->modulation & IEEE80211_CCK_MODULATION) {
-		strlcat(wrqu->name, "b", IFNAMSIZ);
-		if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-			strlcat(wrqu->name, "/g", IFNAMSIZ);
-	} else if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-		strlcat(wrqu->name, "g", IFNAMSIZ);
-
-	if ((ieee->state == IEEE80211_LINKED) ||
-		(ieee->state == IEEE80211_LINKED_SCANNING))
-		strlcat(wrqu->name, "  link", IFNAMSIZ);
-	else if (ieee->state != IEEE80211_NOLINK)
-		strlcat(wrqu->name, " .....", IFNAMSIZ);
-
-
-	return 0;
-}
-
-
-/* this is mostly stolen from hostap */
-int ieee80211_wx_set_power(struct ieee80211_device *ieee,
-			   struct iw_request_info *info, union iwreq_data *wrqu,
-			   char *extra)
-{
-	int ret = 0;
-
-	if ((!ieee->sta_wake_up) ||
-	    (!ieee->ps_request_tx_ack) ||
-	    (!ieee->enter_sleep_state) ||
-	    (!ieee->ps_is_queue_empty)) {
-
-		printk("ERROR. PS mode tried to be use but driver missed a callback\n\n");
-
-		return -1;
-	}
-
-	down(&ieee->wx_sem);
-
-	if (wrqu->power.disabled) {
-		ieee->ps = IEEE80211_PS_DISABLED;
-
-		goto exit;
-	}
-	switch (wrqu->power.flags & IW_POWER_MODE) {
-	case IW_POWER_UNICAST_R:
-		ieee->ps = IEEE80211_PS_UNICAST;
-
-		break;
-	case IW_POWER_ALL_R:
-		ieee->ps = IEEE80211_PS_UNICAST | IEEE80211_PS_MBCAST;
-		break;
-
-	case IW_POWER_ON:
-		ieee->ps = IEEE80211_PS_DISABLED;
-		break;
-
-	default:
-		ret = -EINVAL;
-		goto exit;
-	}
-
-	if (wrqu->power.flags & IW_POWER_TIMEOUT) {
-
-		ieee->ps_timeout = wrqu->power.value / 1000;
-		printk("Timeout %d\n", ieee->ps_timeout);
-	}
-
-	if (wrqu->power.flags & IW_POWER_PERIOD) {
-
-		ret = -EOPNOTSUPP;
-		goto exit;
-		//wrq->value / 1024;
-
-	}
-exit:
-	up(&ieee->wx_sem);
-	return ret;
-
-}
-
-/* this is stolen from hostap */
-int ieee80211_wx_get_power(struct ieee80211_device *ieee,
-			   struct iw_request_info *info, union iwreq_data *wrqu,
-			   char *extra)
-{
-	int ret = 0;
-
-	down(&ieee->wx_sem);
-
-	if (ieee->ps == IEEE80211_PS_DISABLED) {
-		wrqu->power.disabled = 1;
-		goto exit;
-	}
-
-	wrqu->power.disabled = 0;
-
-//	if ((wrqu->power.flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
-		wrqu->power.flags = IW_POWER_TIMEOUT;
-		wrqu->power.value = ieee->ps_timeout * 1000;
-//	} else {
-//		ret = -EOPNOTSUPP;
-//		goto exit;
-		//wrqu->power.flags = IW_POWER_PERIOD;
-		//wrqu->power.value = ieee->current_network.dtim_period *
-		//	ieee->current_network.beacon_interval * 1024;
-//	}
-
-
-	if (ieee->ps & IEEE80211_PS_MBCAST)
-		wrqu->power.flags |= IW_POWER_ALL_R;
-	else
-		wrqu->power.flags |= IW_POWER_UNICAST_R;
-
-exit:
-	up(&ieee->wx_sem);
-	return ret;
-
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
deleted file mode 100644
index 0dc5ae414270..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
+++ /dev/null
@@ -1,591 +0,0 @@
-/******************************************************************************
-
-  Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved.
-
-  This program is free software; you can redistribute it and/or modify it
-  under the terms of version 2 of the GNU General Public License as
-  published by the Free Software Foundation.
-
-  This program is distributed in the hope that it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-  more details.
-
-  You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc., 59
-  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-
-  The full GNU General Public License is included in this distribution in the
-  file called LICENSE.
-
-  Contact Information:
-  James P. Ketrenos <ipw2100-admin@linux.intel.com>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-******************************************************************************
-
-  Few modifications for Realtek's Wi-Fi drivers by
-  Andrea Merello <andrea.merello@gmail.com>
-
-  A special thanks goes to Realtek for their support !
-
-******************************************************************************/
-
-#include <linux/compiler.h>
-#include <linux/errno.h>
-#include <linux/if_arp.h>
-#include <linux/in6.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/tcp.h>
-#include <linux/types.h>
-#include <linux/wireless.h>
-#include <linux/etherdevice.h>
-#include <asm/uaccess.h>
-#include <linux/if_vlan.h>
-
-#include "ieee80211.h"
-
-
-/*
-
-
-802.11 Data Frame
-
-
-802.11 frame_contorl for data frames - 2 bytes
-     ,-----------------------------------------------------------------------------------------.
-bits | 0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  a  |  b  |  c  |  d  |  e   |
-     |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
-val  | 0  |  0  |  0  |  1  |  x  |  0  |  0  |  0  |  1  |  0  |  x  |  x  |  x  |  x  |  x   |
-     |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
-desc | ^-ver-^  |  ^type-^  |  ^-----subtype-----^  | to  |from |more |retry| pwr |more |wep   |
-     |          |           | x=0 data,x=1 data+ack | DS  | DS  |frag |     | mgm |data |      |
-     '-----------------------------------------------------------------------------------------'
-		                                    /\
-                                                    |
-802.11 Data Frame                                   |
-           ,--------- 'ctrl' expands to >-----------'
-          |
-      ,--'---,-------------------------------------------------------------.
-Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
-      |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  Frame  |  fcs |
-      |      | tion | (BSSID) |         |         | ence |  data   |      |
-      `--------------------------------------------------|         |------'
-Total: 28 non-data bytes                                 `----.----'
-                                                              |
-       .- 'Frame data' expands to <---------------------------'
-       |
-       V
-      ,---------------------------------------------------.
-Bytes |  1   |  1   |    1    |    3     |  2   |  0-2304 |
-      |------|------|---------|----------|------|---------|
-Desc. | SNAP | SNAP | Control |Eth Tunnel| Type | IP      |
-      | DSAP | SSAP |         |          |      | Packet  |
-      | 0xAA | 0xAA |0x03 (UI)|0x00-00-F8|      |         |
-      `-----------------------------------------|         |
-Total: 8 non-data bytes                         `----.----'
-                                                     |
-       .- 'IP Packet' expands, if WEP enabled, to <--'
-       |
-       V
-      ,-----------------------.
-Bytes |  4  |   0-2296  |  4  |
-      |-----|-----------|-----|
-Desc. | IV  | Encrypted | ICV |
-      |     | IP Packet |     |
-      `-----------------------'
-Total: 8 non-data bytes
-
-
-802.3 Ethernet Data Frame
-
-      ,-----------------------------------------.
-Bytes |   6   |   6   |  2   |  Variable |   4  |
-      |-------|-------|------|-----------|------|
-Desc. | Dest. | Source| Type | IP Packet |  fcs |
-      |  MAC  |  MAC  |      |           |      |
-      `-----------------------------------------'
-Total: 18 non-data bytes
-
-In the event that fragmentation is required, the incoming payload is split into
-N parts of size ieee->fts.  The first fragment contains the SNAP header and the
-remaining packets are just data.
-
-If encryption is enabled, each fragment payload size is reduced by enough space
-to add the prefix and postfix (IV and ICV totalling 8 bytes in the case of WEP)
-So if you have 1500 bytes of payload with ieee->fts set to 500 without
-encryption it will take 3 frames.  With WEP it will take 4 frames as the
-payload of each frame is reduced to 492 bytes.
-
-* SKB visualization
-*
-*  ,- skb->data
-* |
-* |    ETHERNET HEADER        ,-<-- PAYLOAD
-* |                           |     14 bytes from skb->data
-* |  2 bytes for Type --> ,T. |     (sizeof ethhdr)
-* |                       | | |
-* |,-Dest.--. ,--Src.---. | | |
-* |  6 bytes| | 6 bytes | | | |
-* v         | |         | | | |
-* 0         | v       1 | v | v           2
-* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
-*     ^     | ^         | ^ |
-*     |     | |         | | |
-*     |     | |         | `T' <---- 2 bytes for Type
-*     |     | |         |
-*     |     | '---SNAP--' <-------- 6 bytes for SNAP
-*     |     |
-*     `-IV--' <-------------------- 4 bytes for IV (WEP)
-*
-*      SNAP HEADER
-*
-*/
-
-static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 };
-static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 };
-
-static inline int ieee80211_put_snap(u8 *data, u16 h_proto)
-{
-	struct ieee80211_snap_hdr *snap;
-	u8 *oui;
-
-	snap = (struct ieee80211_snap_hdr *)data;
-	snap->dsap = 0xaa;
-	snap->ssap = 0xaa;
-	snap->ctrl = 0x03;
-
-	if (h_proto == 0x8137 || h_proto == 0x80f3)
-		oui = P802_1H_OUI;
-	else
-		oui = RFC1042_OUI;
-	snap->oui[0] = oui[0];
-	snap->oui[1] = oui[1];
-	snap->oui[2] = oui[2];
-
-	*(u16 *)(data + SNAP_SIZE) = htons(h_proto);
-
-	return SNAP_SIZE + sizeof(u16);
-}
-
-int ieee80211_encrypt_fragment(struct ieee80211_device *ieee,
-			       struct sk_buff *frag, int hdr_len)
-{
-	struct ieee80211_crypt_data* crypt = ieee->crypt[ieee->tx_keyidx];
-	int res;
-
-	/*
-	 * added to care about null crypt condition, to solve that system hangs
-	 * when shared keys error
-	 */
-	if (!crypt || !crypt->ops)
-		return -1;
-
-#ifdef CONFIG_IEEE80211_CRYPT_TKIP
-	struct ieee80211_hdr_4addr *header;
-
-	if (ieee->tkip_countermeasures &&
-	    crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) {
-		header = (struct ieee80211_hdr_4addr *)frag->data;
-		if (net_ratelimit()) {
-			netdev_dbg(ieee->dev, "TKIP countermeasures: dropped "
-			       "TX packet to %pM\n", header->addr1);
-		}
-		return -1;
-	}
-#endif
-	/*
-	 * To encrypt, frame format is:
-	 * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes)
-	 *
-	 * PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU
-	 * encryption.
-	 *
-	 * Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
-	 * call both MSDU and MPDU encryption functions from here.
-	 */
-	atomic_inc(&crypt->refcnt);
-	res = 0;
-	if (crypt->ops->encrypt_msdu)
-		res = crypt->ops->encrypt_msdu(frag, hdr_len, crypt->priv);
-	if (res == 0 && crypt->ops->encrypt_mpdu)
-		res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv);
-
-	atomic_dec(&crypt->refcnt);
-	if (res < 0) {
-		netdev_info(ieee->dev, "Encryption failed: len=%d.\n", frag->len);
-		ieee->ieee_stats.tx_discards++;
-		return -1;
-	}
-
-	return 0;
-}
-
-
-void ieee80211_txb_free(struct ieee80211_txb *txb)
-{
-	int i;
-	if (unlikely(!txb))
-		return;
-	for (i = 0; i < txb->nr_frags; i++)
-		if (txb->fragments[i])
-			dev_kfree_skb_any(txb->fragments[i]);
-	kfree(txb);
-}
-
-static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
-						 gfp_t gfp_mask)
-{
-	struct ieee80211_txb *txb;
-	int i;
-	txb = kmalloc(
-		sizeof(struct ieee80211_txb) + (sizeof(u8 *) * nr_frags),
-		gfp_mask);
-	if (!txb)
-		return NULL;
-
-	memset(txb, 0, sizeof(struct ieee80211_txb));
-	txb->nr_frags = nr_frags;
-	txb->frag_size = txb_size;
-
-	for (i = 0; i < nr_frags; i++) {
-		txb->fragments[i] = dev_alloc_skb(txb_size);
-		if (unlikely(!txb->fragments[i])) {
-			i--;
-			break;
-		}
-	}
-	if (unlikely(i != nr_frags)) {
-		while (i >= 0)
-			dev_kfree_skb_any(txb->fragments[i--]);
-		kfree(txb);
-		return NULL;
-	}
-	return txb;
-}
-
-/*
- * Classify the to-be send data packet
- * Need to acquire the sent queue index.
- */
-static int ieee80211_classify(struct sk_buff *skb,
-			      struct ieee80211_network *network)
-{
-	struct ether_header *eh = (struct ether_header *)skb->data;
-	unsigned int wme_UP = 0;
-
-	if (!network->QoS_Enable) {
-		skb->priority = 0;
-		return(wme_UP);
-	}
-
-	if (eh->ether_type == __constant_htons(ETHERTYPE_IP)) {
-		const struct iphdr *ih = (struct iphdr *)(skb->data +
-		    sizeof(struct ether_header));
-		wme_UP = (ih->tos >> 5)&0x07;
-	} else if (vlan_tx_tag_present(skb)) {/* vtag packet */
-#ifndef VLAN_PRI_SHIFT
-#define VLAN_PRI_SHIFT  13              /* Shift to find VLAN user priority */
-#define VLAN_PRI_MASK   7               /* Mask for user priority bits in VLAN */
-#endif
-		u32 tag = vlan_tx_tag_get(skb);
-		wme_UP = (tag >> VLAN_PRI_SHIFT) & VLAN_PRI_MASK;
-	} else if (ETH_P_PAE ==  ntohs(((struct ethhdr *)skb->data)->h_proto)) {
-		wme_UP = 7;
-	}
-
-	skb->priority = wme_UP;
-	return(wme_UP);
-}
-
-/* SKBs are added to the ieee->tx_queue. */
-int ieee80211_rtl_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct ieee80211_device *ieee = netdev_priv(dev);
-	struct ieee80211_txb *txb = NULL;
-	struct ieee80211_hdr_3addrqos *frag_hdr;
-	int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size;
-	unsigned long flags;
-	struct net_device_stats *stats = &ieee->stats;
-	int ether_type, encrypt;
-	int bytes, fc, qos_ctl, hdr_len;
-	struct sk_buff *skb_frag;
-	struct ieee80211_hdr_3addrqos header = { /* Ensure zero initialized */
-		.duration_id = 0,
-		.seq_ctl = 0,
-		.qos_ctl = 0
-	};
-	u8 dest[ETH_ALEN], src[ETH_ALEN];
-
-	struct ieee80211_crypt_data* crypt;
-
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	/*
-	 * If there is no driver handler to take the TXB, don't bother
-	 * creating it...
-	 */
-	if ((!ieee->hard_start_xmit &&
-	     !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)) ||
-	    ((!ieee->softmac_data_hard_start_xmit &&
-	      (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
-		netdev_warn(ieee->dev, "No xmit handler.\n");
-		goto success;
-	}
-
-	ieee80211_classify(skb,&ieee->current_network);
-	if (likely(ieee->raw_tx == 0)){
-
-		if (unlikely(skb->len < SNAP_SIZE + sizeof(u16))) {
-			netdev_warn(ieee->dev, "skb too small (%d).\n", skb->len);
-			goto success;
-		}
-
-		ether_type = ntohs(((struct ethhdr *)skb->data)->h_proto);
-
-		crypt = ieee->crypt[ieee->tx_keyidx];
-
-		encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) &&
-			ieee->host_encrypt && crypt && crypt->ops;
-
-		if (!encrypt && ieee->ieee802_1x &&
-		ieee->drop_unencrypted && ether_type != ETH_P_PAE) {
-			stats->tx_dropped++;
-			goto success;
-		}
-
-	#ifdef CONFIG_IEEE80211_DEBUG
-		if (crypt && !encrypt && ether_type == ETH_P_PAE) {
-			struct eapol *eap = (struct eapol *)(skb->data +
-				sizeof(struct ethhdr) - SNAP_SIZE - sizeof(u16));
-			IEEE80211_DEBUG_EAP("TX: IEEE 802.11 EAPOL frame: %s\n",
-				eap_get_type(eap->type));
-		}
-	#endif
-
-		/* Save source and destination addresses */
-		memcpy(&dest, skb->data, ETH_ALEN);
-		memcpy(&src, skb->data+ETH_ALEN, ETH_ALEN);
-
-		/* Advance the SKB to the start of the payload */
-		skb_pull(skb, sizeof(struct ethhdr));
-
-		/* Determine total amount of storage required for TXB packets */
-		bytes = skb->len + SNAP_SIZE + sizeof(u16);
-
-		if (ieee->current_network.QoS_Enable) {
-			if (encrypt)
-				fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA |
-					IEEE80211_FCTL_WEP;
-			else
-				fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA;
-
-		} else {
-			if (encrypt)
-				fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA |
-					IEEE80211_FCTL_WEP;
-			else
-				fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA;
-		}
-
-		if (ieee->iw_mode == IW_MODE_INFRA) {
-			fc |= IEEE80211_FCTL_TODS;
-			/* To DS: Addr1 = BSSID, Addr2 = SA, Addr3 = DA */
-			memcpy(&header.addr1, ieee->current_network.bssid, ETH_ALEN);
-			memcpy(&header.addr2, &src, ETH_ALEN);
-			memcpy(&header.addr3, &dest, ETH_ALEN);
-		} else if (ieee->iw_mode == IW_MODE_ADHOC) {
-			/*
-			 * not From/To DS: Addr1 = DA, Addr2 = SA,
-			 * Addr3 = BSSID
-			 */
-			memcpy(&header.addr1, dest, ETH_ALEN);
-			memcpy(&header.addr2, src, ETH_ALEN);
-			memcpy(&header.addr3, ieee->current_network.bssid, ETH_ALEN);
-		}
-		header.frame_ctl = cpu_to_le16(fc);
-
-		/*
-		 * Determine fragmentation size based on destination (multicast
-		 * and broadcast are not fragmented)
-		 */
-		if (is_multicast_ether_addr(header.addr1)) {
-			frag_size = MAX_FRAG_THRESHOLD;
-			qos_ctl = QOS_CTL_NOTCONTAIN_ACK;
-		} else {
-			/* default:392 */
-			frag_size = ieee->fts;
-			qos_ctl = 0;
-		}
-
-		if (ieee->current_network.QoS_Enable)	{
-			hdr_len = IEEE80211_3ADDR_LEN + 2;
-			/* skb->priority is set in the ieee80211_classify() */
-			qos_ctl |= skb->priority;
-			header.qos_ctl = cpu_to_le16(qos_ctl);
-		} else {
-			hdr_len = IEEE80211_3ADDR_LEN;
-		}
-
-		/*
-		 * Determine amount of payload per fragment.  Regardless of if
-		 * this stack is providing the full 802.11 header, one will
-		 * eventually be affixed to this fragment -- so we must account
-		 * for it when determining the amount of payload space.
-		 */
-		bytes_per_frag = frag_size - hdr_len;
-		if (ieee->config &
-		(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
-			bytes_per_frag -= IEEE80211_FCS_LEN;
-
-		/* Each fragment may need to have room for encryption pre/postfix */
-		if (encrypt)
-			bytes_per_frag -= crypt->ops->extra_prefix_len +
-				crypt->ops->extra_postfix_len;
-
-		/*
-		 * Number of fragments is the total bytes_per_frag /
-		 * payload_per_fragment
-		 */
-		nr_frags = bytes / bytes_per_frag;
-		bytes_last_frag = bytes % bytes_per_frag;
-		if (bytes_last_frag)
-			nr_frags++;
-		else
-			bytes_last_frag = bytes_per_frag;
-
-		/*
-		 * When we allocate the TXB we allocate enough space for the 
-		 * reserve and full fragment bytes (bytes_per_frag doesn't
-		 * include prefix, postfix, header, FCS, etc.)
-		 */
-		txb = ieee80211_alloc_txb(nr_frags, frag_size, GFP_ATOMIC);
-		if (unlikely(!txb)) {
-			netdev_warn(ieee->dev, "Could not allocate TXB\n");
-			goto failed;
-		}
-		txb->encrypted = encrypt;
-		txb->payload_size = bytes;
-
-		for (i = 0; i < nr_frags; i++) {
-			skb_frag = txb->fragments[i];
-			skb_frag->priority = UP2AC(skb->priority);
-			if (encrypt)
-				skb_reserve(skb_frag, crypt->ops->extra_prefix_len);
-
-			frag_hdr = (struct ieee80211_hdr_3addrqos *)skb_put(
-				skb_frag, hdr_len);
-			memcpy(frag_hdr, &header, hdr_len);
-
-			/*
-			 * If this is not the last fragment, then add the MOREFRAGS
-			 * bit to the frame control
-			 */
-			if (i != nr_frags - 1) {
-				frag_hdr->frame_ctl = cpu_to_le16(
-					fc | IEEE80211_FCTL_MOREFRAGS);
-				bytes = bytes_per_frag;
-
-			} else {
-				/* The last fragment takes the remaining length */
-				bytes = bytes_last_frag;
-			}
-			if (ieee->current_network.QoS_Enable) {
-				/*
-				 * add 1 only indicate to corresponding seq
-				 * number control 2006/7/12
-				 */
-				frag_hdr->seq_ctl = cpu_to_le16(
-					ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i);
-			} else {
-				frag_hdr->seq_ctl = cpu_to_le16(
-					ieee->seq_ctrl[0]<<4 | i);
-			}
-
-			/* Put a SNAP header on the first fragment */
-			if (i == 0) {
-				ieee80211_put_snap(
-					skb_put(skb_frag, SNAP_SIZE + sizeof(u16)),
-					ether_type);
-				bytes -= SNAP_SIZE + sizeof(u16);
-			}
-
-			memcpy(skb_put(skb_frag, bytes), skb->data, bytes);
-
-			/* Advance the SKB... */
-			skb_pull(skb, bytes);
-
-			/*
-			 * Encryption routine will move the header forward in
-			 * order to insert the IV between the header and the
-			 * payload
-			 */
-			if (encrypt)
-				ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
-			if (ieee->config &
-			(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
-				skb_put(skb_frag, 4);
-		}
-		/* Advance sequence number in data frame. */
-		if (ieee->current_network.QoS_Enable) {
-			if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF)
-				ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0;
-			else
-				ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
-		} else {
-			if (ieee->seq_ctrl[0] == 0xFFF)
-				ieee->seq_ctrl[0] = 0;
-			else
-				ieee->seq_ctrl[0]++;
-		}
-	} else {
-		if (unlikely(skb->len < sizeof(struct ieee80211_hdr_3addr))) {
-			netdev_warn(ieee->dev, "skb too small (%d).\n", skb->len);
-			goto success;
-		}
-
-		txb = ieee80211_alloc_txb(1, skb->len, GFP_ATOMIC);
-		if (!txb) {
-			netdev_warn(ieee->dev, "Could not allocate TXB\n");
-			goto failed;
-		}
-
-		txb->encrypted = 0;
-		txb->payload_size = skb->len;
-		memcpy(skb_put(txb->fragments[0], skb->len), skb->data, skb->len);
-	}
-
- success:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-		dev_kfree_skb_any(skb);
-	if (txb) {
-		if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE) {
-			ieee80211_softmac_xmit(txb, ieee);
-		} else {
-			if ((*ieee->hard_start_xmit)(txb, dev) == 0) {
-				stats->tx_packets++;
-				stats->tx_bytes += txb->payload_size;
-				return NETDEV_TX_OK;
-			}
-			ieee80211_txb_free(txb);
-		}
-	}
-
-	return NETDEV_TX_OK;
-
- failed:
-	spin_unlock_irqrestore(&ieee->lock, flags);
-	netif_stop_queue(dev);
-	stats->tx_errors++;
-	return NETDEV_TX_BUSY;
-
-}
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
deleted file mode 100644
index 07c3f715a6f5..000000000000
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ /dev/null
@@ -1,713 +0,0 @@
-/*
- *  Copyright(c) 2004 Intel Corporation. All rights reserved.
- *
- * Portions of this file are based on the WEP enablement code provided by the
- * Host AP project hostap-drivers v0.1.3
- * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- * <jkmaline@cc.hut.fi>
- * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * James P. Ketrenos <ipw2100-admin@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- */
-
-#include <linux/wireless.h>
-#include <linux/kmod.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/etherdevice.h>
-
-#include "ieee80211.h"
-static const char *ieee80211_modes[] = {
-	"?", "a", "b", "ab", "g", "ag", "bg", "abg"
-};
-
-#define MAX_CUSTOM_LEN 64
-static inline char *rtl818x_translate_scan(struct ieee80211_device *ieee,
-					   char *start, char *stop,
-					   struct ieee80211_network *network,
-					   struct iw_request_info *info)
-{
-	char custom[MAX_CUSTOM_LEN];
-	char *p;
-	struct iw_event iwe;
-	int i, j;
-	u8 max_rate, rate;
-
-	/* First entry *MUST* be the AP MAC address */
-	iwe.cmd = SIOCGIWAP;
-	iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-	ether_addr_copy(iwe.u.ap_addr.sa_data, network->bssid);
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_ADDR_LEN);
-
-	/* Remaining entries will be displayed in the order we provide them */
-
-	/* Add the ESSID */
-	iwe.cmd = SIOCGIWESSID;
-	iwe.u.data.flags = 1;
-	if (network->ssid_len == 0) {
-		iwe.u.data.length = sizeof("<hidden>");
-		start = iwe_stream_add_point(info, start, stop, &iwe, "<hidden>");
-	} else {
-		iwe.u.data.length = min_t(u8, network->ssid_len, 32);
-		start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
-	}
-	/* Add the protocol name */
-	iwe.cmd = SIOCGIWNAME;
-	snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", ieee80211_modes[network->mode]);
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_CHAR_LEN);
-
-	/* Add mode */
-	iwe.cmd = SIOCGIWMODE;
-	if (network->capability &
-	    (WLAN_CAPABILITY_BSS | WLAN_CAPABILITY_IBSS)) {
-		if (network->capability & WLAN_CAPABILITY_BSS)
-			iwe.u.mode = IW_MODE_MASTER;
-		else
-			iwe.u.mode = IW_MODE_ADHOC;
-
-		start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_UINT_LEN);
-	}
-
-	/* Add frequency/channel */
-	iwe.cmd = SIOCGIWFREQ;
-	iwe.u.freq.m = network->channel;
-	iwe.u.freq.e = 0;
-	iwe.u.freq.i = 0;
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_FREQ_LEN);
-
-	/* Add encryption capability */
-	iwe.cmd = SIOCGIWENCODE;
-	if (network->capability & WLAN_CAPABILITY_PRIVACY)
-		iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-	else
-		iwe.u.data.flags = IW_ENCODE_DISABLED;
-	iwe.u.data.length = 0;
-	start = iwe_stream_add_point(info, start, stop, &iwe, network->ssid);
-
-	/* Add basic and extended rates */
-	max_rate = 0;
-	p = custom;
-	p += snprintf(p, MAX_CUSTOM_LEN - (p - custom), " Rates (Mb/s): ");
-	for (i = 0, j = 0; i < network->rates_len; ) {
-		if (j < network->rates_ex_len &&
-		    ((network->rates_ex[j] & 0x7F) <
-		     (network->rates[i] & 0x7F)))
-			rate = network->rates_ex[j++] & 0x7F;
-		else
-			rate = network->rates[i++] & 0x7F;
-		if (rate > max_rate)
-			max_rate = rate;
-		p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
-			      "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
-	}
-	for (; j < network->rates_ex_len; j++) {
-		rate = network->rates_ex[j] & 0x7F;
-		p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
-			      "%d%s ", rate >> 1, (rate & 1) ? ".5" : "");
-		if (rate > max_rate)
-			max_rate = rate;
-	}
-
-	iwe.cmd = SIOCGIWRATE;
-	iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
-	iwe.u.bitrate.value = max_rate * 500000;
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_PARAM_LEN);
-
-	iwe.cmd = IWEVCUSTOM;
-	iwe.u.data.length = p - custom;
-	if (iwe.u.data.length)
-		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-
-	/* Add quality statistics */
-	/* TODO: Fix these values... */
-	if (network->stats.signal == 0 || network->stats.rssi == 0)
-		netdev_info(ieee->dev, "========>signal:%d, rssi:%d\n",
-			    network->stats.signal, network->stats.rssi);
-	iwe.cmd = IWEVQUAL;
-	iwe.u.qual.qual = network->stats.signalstrength;
-	iwe.u.qual.level = network->stats.signal;
-	iwe.u.qual.noise = network->stats.noise;
-	iwe.u.qual.updated = network->stats.mask & IEEE80211_STATMASK_WEMASK;
-	if (!(network->stats.mask & IEEE80211_STATMASK_RSSI))
-		iwe.u.qual.updated |= IW_QUAL_LEVEL_INVALID;
-	if (!(network->stats.mask & IEEE80211_STATMASK_NOISE))
-		iwe.u.qual.updated |= IW_QUAL_NOISE_INVALID;
-	if (!(network->stats.mask & IEEE80211_STATMASK_SIGNAL))
-		iwe.u.qual.updated |= IW_QUAL_QUAL_INVALID;
-	iwe.u.qual.updated = 7;
-	start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_QUAL_LEN);
-
-	iwe.cmd = IWEVCUSTOM;
-	p = custom;
-
-	iwe.u.data.length = p - custom;
-	if (iwe.u.data.length)
-		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-
-	memset(&iwe, 0, sizeof(iwe));
-	if (network->wpa_ie_len) {
-		char buf[MAX_WPA_IE_LEN];
-		memcpy(buf, network->wpa_ie, network->wpa_ie_len);
-		iwe.cmd = IWEVGENIE;
-		iwe.u.data.length = network->wpa_ie_len;
-		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-	}
-
-	memset(&iwe, 0, sizeof(iwe));
-	if (network->rsn_ie_len) {
-		char buf[MAX_WPA_IE_LEN];
-		memcpy(buf, network->rsn_ie, network->rsn_ie_len);
-		iwe.cmd = IWEVGENIE;
-		iwe.u.data.length = network->rsn_ie_len;
-		start = iwe_stream_add_point(info, start, stop, &iwe, buf);
-	}
-
-	/* Add EXTRA: Age to display seconds since last beacon/probe response
-	 * for given network.
-	 */
-	iwe.cmd = IWEVCUSTOM;
-	p = custom;
-	p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
-		      " Last beacon: %lums ago", (jiffies - network->last_scanned) / (HZ / 100));
-	iwe.u.data.length = p - custom;
-	if (iwe.u.data.length)
-		start = iwe_stream_add_point(info, start, stop, &iwe, custom);
-
-	return start;
-}
-
-int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	struct ieee80211_network *network;
-	unsigned long flags;
-	int err = 0;
-	char *ev = extra;
-	char *stop = ev + wrqu->data.length;
-	int i = 0;
-
-	IEEE80211_DEBUG_WX("Getting scan\n");
-	down(&ieee->wx_sem);
-	spin_lock_irqsave(&ieee->lock, flags);
-
-	if (!ieee->bHwRadioOff) {
-		list_for_each_entry(network, &ieee->network_list, list) {
-			i++;
-
-			if ((stop-ev) < 200) {
-				err = -E2BIG;
-				break;
-			}
-			if (ieee->scan_age == 0 ||
-			    time_after(network->last_scanned + ieee->scan_age, jiffies)) {
-				ev = rtl818x_translate_scan(ieee, ev, stop, network, info);
-			} else
-				IEEE80211_DEBUG_SCAN(
-					"Not showing network '%s ("
-					"%pM)' due to age (%lums).\n",
-					escape_essid(network->ssid,
-						     network->ssid_len),
-					network->bssid,
-					(jiffies - network->last_scanned) / (HZ / 100));
-		}
-	}
-	spin_unlock_irqrestore(&ieee->lock, flags);
-	up(&ieee->wx_sem);
-	wrqu->data.length = ev -  extra;
-	wrqu->data.flags = 0;
-	IEEE80211_DEBUG_WX("exit: %d networks returned.\n", i);
-
-	return err;
-}
-
-int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *keybuf)
-{
-	struct iw_point *erq = &(wrqu->encoding);
-	struct net_device *dev = ieee->dev;
-	struct ieee80211_security sec = {
-		.flags = 0
-	};
-	int i, key, key_provided, len;
-	struct ieee80211_crypt_data **crypt;
-
-	IEEE80211_DEBUG_WX("SET_ENCODE\n");
-
-	key = erq->flags & IW_ENCODE_INDEX;
-	if (key) {
-		if (key > WEP_KEYS)
-			return -EINVAL;
-		key--;
-		key_provided = 1;
-	} else {
-		key_provided = 0;
-		key = ieee->tx_keyidx;
-	}
-
-	IEEE80211_DEBUG_WX("Key: %d [%s]\n", key, key_provided ?
-			   "provided" : "default");
-
-	crypt = &ieee->crypt[key];
-
-	if (erq->flags & IW_ENCODE_DISABLED) {
-		if (key_provided && *crypt) {
-			IEEE80211_DEBUG_WX("Disabling encryption on key %d.\n",
-					   key);
-			ieee80211_crypt_delayed_deinit(ieee, crypt);
-		} else
-			IEEE80211_DEBUG_WX("Disabling encryption.\n");
-
-		/* Check all the keys to see if any are still configured,
-		 * and if no key index was provided, de-init them all.
-		 */
-		for (i = 0; i < WEP_KEYS; i++) {
-			if (ieee->crypt[i] != NULL) {
-				if (key_provided)
-					break;
-				ieee80211_crypt_delayed_deinit(
-					ieee, &ieee->crypt[i]);
-			}
-		}
-
-		if (i == WEP_KEYS) {
-			sec.enabled = 0;
-			sec.level = SEC_LEVEL_0;
-			sec.flags |= SEC_ENABLED | SEC_LEVEL;
-		}
-
-		goto done;
-	}
-
-	sec.enabled = 1;
-	sec.flags |= SEC_ENABLED;
-
-	if (*crypt != NULL && (*crypt)->ops != NULL &&
-	    strcmp((*crypt)->ops->name, "WEP") != 0) {
-		/* changing to use WEP; deinit previously used algorithm
-		 * on this key.
-		 */
-		ieee80211_crypt_delayed_deinit(ieee, crypt);
-	}
-
-	if (*crypt == NULL) {
-		struct ieee80211_crypt_data *new_crypt;
-
-		/* take WEP into use */
-		new_crypt = kzalloc(sizeof(struct ieee80211_crypt_data),
-				    GFP_KERNEL);
-		if (new_crypt == NULL)
-			return -ENOMEM;
-		new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-		if (!new_crypt->ops)
-			new_crypt->ops = ieee80211_get_crypto_ops("WEP");
-
-		if (new_crypt->ops)
-			new_crypt->priv = new_crypt->ops->init(key);
-
-		if (!new_crypt->ops || !new_crypt->priv) {
-			kfree(new_crypt);
-			new_crypt = NULL;
-
-			netdev_warn(ieee->dev,
-				    "could not initialize WEP: load module ieee80211_crypt_wep\n");
-			return -EOPNOTSUPP;
-		}
-		*crypt = new_crypt;
-	}
-
-	/* If a new key was provided, set it up */
-	if (erq->length > 0) {
-		len = erq->length <= 5 ? 5 : 13;
-		memcpy(sec.keys[key], keybuf, erq->length);
-		if (len > erq->length)
-			memset(sec.keys[key] + erq->length, 0,
-			       len - erq->length);
-		IEEE80211_DEBUG_WX("Setting key %d to '%s' (%d:%d bytes)\n",
-				   key, escape_essid(sec.keys[key], len),
-				   erq->length, len);
-		sec.key_sizes[key] = len;
-		(*crypt)->ops->set_key(sec.keys[key], len, NULL,
-				       (*crypt)->priv);
-		sec.flags |= (1 << key);
-		/* This ensures a key will be activated if no key is
-		 * explicitly set.
-		 */
-		if (key == sec.active_key)
-			sec.flags |= SEC_ACTIVE_KEY;
-		ieee->tx_keyidx = key;
-	} else {
-		len = (*crypt)->ops->get_key(sec.keys[key], WEP_KEY_LEN,
-					     NULL, (*crypt)->priv);
-		if (len == 0) {
-			/* Set a default key of all 0 */
-			IEEE80211_DEBUG_WX("Setting key %d to all zero.\n",
-					   key);
-			memset(sec.keys[key], 0, 13);
-			(*crypt)->ops->set_key(sec.keys[key], 13, NULL,
-					       (*crypt)->priv);
-			sec.key_sizes[key] = 13;
-			sec.flags |= (1 << key);
-		}
-
-		/* No key data - just set the default TX key index */
-		if (key_provided) {
-			IEEE80211_DEBUG_WX(
-				"Setting key %d to default Tx key.\n", key);
-			ieee->tx_keyidx = key;
-			sec.active_key = key;
-			sec.flags |= SEC_ACTIVE_KEY;
-		}
-	}
-
- done:
-	ieee->open_wep = !(erq->flags & IW_ENCODE_RESTRICTED);
-	sec.auth_mode = ieee->open_wep ? WLAN_AUTH_OPEN : WLAN_AUTH_SHARED_KEY;
-	sec.flags |= SEC_AUTH_MODE;
-	IEEE80211_DEBUG_WX("Auth: %s\n", sec.auth_mode == WLAN_AUTH_OPEN ?
-			   "OPEN" : "SHARED KEY");
-
-	/* For now we just support WEP, so only set that security level...
-	 * TODO: When WPA is added this is one place that needs to change
-	 */
-	sec.flags |= SEC_LEVEL;
-	sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
-
-	if (ieee->set_security)
-		ieee->set_security(dev, &sec);
-
-	/* Do not reset port if card is in Managed mode since resetting will
-	 * generate new IEEE 802.11 authentication which may end up in looping
-	 * with IEEE 802.1X.  If your hardware requires a reset after WEP
-	 * configuration (for example... Prism2), implement the reset_port in
-	 * the callbacks structures used to initialize the 802.11 stack.
-	 */
-	if (ieee->reset_on_keychange &&
-	    ieee->iw_mode != IW_MODE_INFRA &&
-	    ieee->reset_port && ieee->reset_port(dev)) {
-		netdev_dbg(ieee->dev, "reset_port failed\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *keybuf)
-{
-	struct iw_point *erq = &(wrqu->encoding);
-	int len, key;
-	struct ieee80211_crypt_data *crypt;
-
-	IEEE80211_DEBUG_WX("GET_ENCODE\n");
-
-	if (ieee->iw_mode == IW_MODE_MONITOR)
-		return -1;
-
-	key = erq->flags & IW_ENCODE_INDEX;
-	if (key) {
-		if (key > WEP_KEYS)
-			return -EINVAL;
-		key--;
-	} else
-		key = ieee->tx_keyidx;
-
-	crypt = ieee->crypt[key];
-	erq->flags = key + 1;
-
-	if (crypt == NULL || crypt->ops == NULL) {
-		erq->length = 0;
-		erq->flags |= IW_ENCODE_DISABLED;
-		return 0;
-	}
-
-	if (strcmp(crypt->ops->name, "WEP") != 0) {
-		/* only WEP is supported with wireless extensions, so just
-		 * report that encryption is used.
-		 */
-		erq->length = 0;
-		erq->flags |= IW_ENCODE_ENABLED;
-		return 0;
-	}
-
-	len = crypt->ops->get_key(keybuf, WEP_KEY_LEN, NULL, crypt->priv);
-	erq->length = (len >= 0 ? len : 0);
-
-	erq->flags |= IW_ENCODE_ENABLED;
-
-	if (ieee->open_wep)
-		erq->flags |= IW_ENCODE_OPEN;
-	else
-		erq->flags |= IW_ENCODE_RESTRICTED;
-
-	return 0;
-}
-
-int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct net_device *dev = ieee->dev;
-	struct iw_point *encoding = &wrqu->encoding;
-	struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
-	int i, idx, ret = 0;
-	int group_key = 0;
-	const char *alg;
-	struct ieee80211_crypto_ops *ops;
-	struct ieee80211_crypt_data **crypt;
-
-	struct ieee80211_security sec = {
-		.flags = 0,
-	};
-	idx = encoding->flags & IW_ENCODE_INDEX;
-	if (idx) {
-		if (idx < 1 || idx > WEP_KEYS)
-			return -EINVAL;
-		idx--;
-	} else
-		idx = ieee->tx_keyidx;
-
-	if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
-		crypt = &ieee->crypt[idx];
-		group_key = 1;
-	} else {
-		/* some Cisco APs use idx>0 for unicast in dynamic WEP */
-		if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP)
-			return -EINVAL;
-		if (ieee->iw_mode == IW_MODE_INFRA)
-			crypt = &ieee->crypt[idx];
-		else
-			return -EINVAL;
-	}
-
-	sec.flags |= SEC_ENABLED;
-	if ((encoding->flags & IW_ENCODE_DISABLED) ||
-	    ext->alg == IW_ENCODE_ALG_NONE) {
-		if (*crypt)
-			ieee80211_crypt_delayed_deinit(ieee, crypt);
-
-		for (i = 0; i < WEP_KEYS; i++)
-			if (ieee->crypt[i] != NULL)
-				break;
-
-		if (i == WEP_KEYS) {
-			sec.enabled = 0;
-			sec.level = SEC_LEVEL_0;
-			sec.flags |= SEC_LEVEL;
-		}
-		goto done;
-	}
-
-	sec.enabled = 1;
-
-	switch (ext->alg) {
-	case IW_ENCODE_ALG_WEP:
-		alg = "WEP";
-		break;
-	case IW_ENCODE_ALG_TKIP:
-		alg = "TKIP";
-		break;
-	case IW_ENCODE_ALG_CCMP:
-		alg = "CCMP";
-		break;
-	default:
-		IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
-				   dev->name, ext->alg);
-		ret = -EINVAL;
-		goto done;
-	}
-
-	ops = ieee80211_get_crypto_ops(alg);
-	if (ops == NULL)
-		ops = ieee80211_get_crypto_ops(alg);
-	if (ops == NULL) {
-		IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
-				   dev->name, ext->alg);
-		netdev_err(ieee->dev, "========>unknown crypto alg %d\n",
-			   ext->alg);
-		ret = -EINVAL;
-		goto done;
-	}
-
-	if (*crypt == NULL || (*crypt)->ops != ops) {
-		struct ieee80211_crypt_data *new_crypt;
-
-		ieee80211_crypt_delayed_deinit(ieee, crypt);
-
-		new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL);
-		if (new_crypt == NULL) {
-			ret = -ENOMEM;
-			goto done;
-		}
-		new_crypt->ops = ops;
-		if (new_crypt->ops)
-			new_crypt->priv = new_crypt->ops->init(idx);
-		if (new_crypt->priv == NULL) {
-			kfree(new_crypt);
-			ret = -EINVAL;
-			goto done;
-		}
-		*crypt = new_crypt;
-
-	}
-
-	if (ext->key_len > 0 && (*crypt)->ops->set_key &&
-	    (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
-				   (*crypt)->priv) < 0) {
-		IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name);
-		netdev_err(ieee->dev, "key setting failed\n");
-		ret = -EINVAL;
-		goto done;
-	}
-#if 1
-	if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
-		ieee->tx_keyidx = idx;
-		sec.active_key = idx;
-		sec.flags |= SEC_ACTIVE_KEY;
-	}
-
-	if (ext->alg != IW_ENCODE_ALG_NONE) {
-		memcpy(sec.keys[idx], ext->key, ext->key_len);
-		sec.key_sizes[idx] = ext->key_len;
-		sec.flags |= (1 << idx);
-		if (ext->alg == IW_ENCODE_ALG_WEP) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_1;
-		} else if (ext->alg == IW_ENCODE_ALG_TKIP) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_2;
-		} else if (ext->alg == IW_ENCODE_ALG_CCMP) {
-			sec.flags |= SEC_LEVEL;
-			sec.level = SEC_LEVEL_3;
-		}
-		/* Don't set sec level for group keys. */
-		if (group_key)
-			sec.flags &= ~SEC_LEVEL;
-	}
-#endif
-done:
-	if (ieee->set_security)
-		ieee->set_security(ieee->dev, &sec);
-
-	if (ieee->reset_on_keychange &&
-	    ieee->iw_mode != IW_MODE_INFRA &&
-	    ieee->reset_port && ieee->reset_port(dev)) {
-		IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  union iwreq_data *wrqu, char *extra)
-{
-	struct iw_mlme *mlme = (struct iw_mlme *) extra;
-#if 1
-	switch (mlme->cmd) {
-	case IW_MLME_DEAUTH:
-	case IW_MLME_DISASSOC:
-		ieee80211_disassociate(ieee);
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-#endif
-	return 0;
-}
-
-int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
-			  struct iw_request_info *info,
-			  struct iw_param *data, char *extra)
-{
-	switch (data->flags & IW_AUTH_INDEX) {
-	case IW_AUTH_WPA_VERSION:
-		/* need to support wpa2 here */
-		break;
-	case IW_AUTH_CIPHER_PAIRWISE:
-	case IW_AUTH_CIPHER_GROUP:
-	case IW_AUTH_KEY_MGMT:
-		/* Host AP driver does not use these parameters and allows
-		 * wpa_supplicant to control them internally.
-		 */
-		break;
-	case IW_AUTH_TKIP_COUNTERMEASURES:
-		ieee->tkip_countermeasures = data->value;
-		break;
-	case IW_AUTH_DROP_UNENCRYPTED:
-		ieee->drop_unencrypted = data->value;
-		break;
-
-	case IW_AUTH_80211_AUTH_ALG:
-		ieee->open_wep = (data->value&IW_AUTH_ALG_OPEN_SYSTEM) ? 1 : 0;
-		break;
-
-#if 1
-	case IW_AUTH_WPA_ENABLED:
-		ieee->wpa_enabled = (data->value) ? 1 : 0;
-		break;
-
-#endif
-	case IW_AUTH_RX_UNENCRYPTED_EAPOL:
-		ieee->ieee802_1x = data->value;
-		break;
-	case IW_AUTH_PRIVACY_INVOKED:
-		ieee->privacy_invoked = data->value;
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-	return 0;
-}
-
-#if 1
-int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
-{
-	u8 *buf = NULL;
-
-	if (len > MAX_WPA_IE_LEN || (len && ie == NULL)) {
-		netdev_err(ieee->dev, "return error out, len:%zu\n", len);
-	return -EINVAL;
-	}
-
-	if (len) {
-		if (len != ie[1]+2) {
-			netdev_err(ieee->dev, "len:%zu, ie:%d\n", len, ie[1]);
-			return -EINVAL;
-		}
-		buf = kmemdup(ie, len, GFP_KERNEL);
-		if (buf == NULL)
-			return -ENOMEM;
-		kfree(ieee->wpa_ie);
-		ieee->wpa_ie = buf;
-		ieee->wpa_ie_len = len;
-	} else {
-		kfree(ieee->wpa_ie);
-		ieee->wpa_ie = NULL;
-		ieee->wpa_ie_len = 0;
-	}
-
-	return 0;
-
-}
-#endif
diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
deleted file mode 100644
index 9f931dba1d82..000000000000
--- a/drivers/staging/rtl8187se/r8180.h
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * This is part of rtl8180 OpenSource driver.
- * Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
- * Released under the terms of GPL (General Public Licence)
- *
- * Parts of this driver are based on the GPL part of the official realtek driver
- *
- * Parts of this driver are based on the rtl8180 driver skeleton from Patric
- * Schenke & Andres Salomon
- *
- * Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
- *
- * We want to thanks the Authors of those projects and the Ndiswrapper project
- * Authors.
- */
-
-#ifndef R8180H
-#define R8180H
-
-#include <linux/interrupt.h>
-
-#define RTL8180_MODULE_NAME "r8180"
-#define DMESG(x, a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
-#define DMESGW(x, a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a)
-#define DMESGE(x, a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a)
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-#include <linux/rtnetlink.h> /* for rtnl_lock() */
-#include <linux/wireless.h>
-#include <linux/timer.h>
-#include <linux/proc_fs.h> /* Necessary because we use the proc fs. */
-#include <linux/if_arp.h>
-#include "ieee80211/ieee80211.h"
-#include <asm/io.h>
-
-#define EPROM_93c46 0
-#define EPROM_93c56 1
-
-#define RTL_IOCTL_WPA_SUPPLICANT (SIOCIWFIRSTPRIV + 30)
-
-#define DEFAULT_FRAG_THRESHOLD 2342U
-#define MIN_FRAG_THRESHOLD 256U
-#define DEFAULT_RTS_THRESHOLD 2342U
-#define MIN_RTS_THRESHOLD 0U
-#define MAX_RTS_THRESHOLD 2342U
-#define DEFAULT_BEACONINTERVAL 0x64U
-
-#define DEFAULT_RETRY_RTS 7
-#define DEFAULT_RETRY_DATA 7
-
-#define BEACON_QUEUE 6
-
-#define aSifsTime 10
-
-#define sCrcLng 4
-#define sAckCtsLng 112 /* bits in ACK and CTS frames. */
-/* +by amy 080312. */
-#define RATE_ADAPTIVE_TIMER_PERIOD 300
-
-enum wireless_mode {
-	WIRELESS_MODE_UNKNOWN = 0x00,
-	WIRELESS_MODE_A = 0x01,
-	WIRELESS_MODE_B = 0x02,
-	WIRELESS_MODE_G = 0x04,
-	WIRELESS_MODE_AUTO = 0x08,
-};
-
-struct chnl_access_setting {
-	u16 sifs_timer;
-	u16 difs_timer;
-	u16 slot_time_timer;
-	u16 eifs_timer;
-	u16 cwmin_index;
-	u16 cwmax_index;
-};
-
-enum nic_t {
-	NIC_8185 = 1,
-	NIC_8185B
-};
-
-typedef u32 AC_CODING;
-#define AC0_BE	0 /* ACI: 0x00 */ /* Best Effort. */
-#define AC1_BK	1 /* ACI: 0x01 */ /* Background. */
-#define AC2_VI	2 /* ACI: 0x10 */ /* Video. */
-#define AC3_VO	3 /* ACI: 0x11 */ /* Voice. */
-#define AC_MAX	4 /* Max: define total number; Should not to be used as a real
-		   * enum.
-		   */
-
-/*
- * ECWmin/ECWmax field.
- * Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
- */
-typedef union _ECW {
-	u8 charData;
-	struct {
-		u8 ECWmin:4;
-		u8 ECWmax:4;
-	} f;	/* Field */
-} ECW, *PECW;
-
-/*
- * ACI/AIFSN Field. Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
- */
-typedef union _ACI_AIFSN {
-	u8 charData;
-
-	struct {
-		u8 AIFSN:4;
-		u8 ACM:1;
-		u8 ACI:2;
-		u8 Reserved:1;
-	} f;	/* Field */
-} ACI_AIFSN, *PACI_AIFSN;
-
-/*
- * AC Parameters Record Format.
- * Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
- */
-typedef union _AC_PARAM {
-	u32 longData;
-	u8 charData[4];
-
-	struct {
-		ACI_AIFSN AciAifsn;
-		ECW Ecw;
-		u16 TXOPLimit;
-	} f;	/* Field */
-} AC_PARAM, *PAC_PARAM;
-
-struct buffer {
-	struct buffer *next;
-	u32 *buf;
-	dma_addr_t dma;
-};
-
-/* YJ,modified,080828. */
-struct stats {
-	unsigned long txrdu;
-	unsigned long rxrdu;
-	unsigned long rxnolast;
-	unsigned long rxnodata;
-	unsigned long rxnopointer;
-	unsigned long txnperr;
-	unsigned long txresumed;
-	unsigned long rxerr;
-	unsigned long rxoverflow;
-	unsigned long rxint;
-	unsigned long txbkpokint;
-	unsigned long txbepoking;
-	unsigned long txbkperr;
-	unsigned long txbeperr;
-	unsigned long txnpokint;
-	unsigned long txhpokint;
-	unsigned long txhperr;
-	unsigned long ints;
-	unsigned long shints;
-	unsigned long txoverflow;
-	unsigned long rxdmafail;
-	unsigned long txbeacon;
-	unsigned long txbeaconerr;
-	unsigned long txlpokint;
-	unsigned long txlperr;
-	unsigned long txretry; /* retry number tony 20060601 */
-	unsigned long rxcrcerrmin; /* crc error (0-500) */
-	unsigned long rxcrcerrmid; /* crc error (500-1000) */
-	unsigned long rxcrcerrmax; /* crc error (>1000) */
-	unsigned long rxicverr; /* ICV error */
-};
-
-#define MAX_LD_SLOT_NUM 10
-#define KEEP_ALIVE_INTERVAL 20 /* in seconds. */
-#define CHECK_FOR_HANG_PERIOD 2 /* be equal to watchdog check time. */
-#define DEFAULT_KEEP_ALIVE_LEVEL 1
-#define DEFAULT_SLOT_NUM 2
-#define POWER_PROFILE_AC 0
-#define POWER_PROFILE_BATTERY 1
-
-struct link_detect_t {
-	u32 rx_frame_num[MAX_LD_SLOT_NUM]; /* number of Rx Frame.
-					    * CheckForHang_period  to determine
-					    * link status.
-					    */
-	u16 slot_num; /* number of CheckForHang period to determine link status,
-		       * default is 2.
-		       */
-	u16 slot_index;
-	u32 num_tx_ok_in_period; /* number of packet transmitted during
-				  * CheckForHang.
-				  */
-	u32 num_rx_ok_in_period; /* number of packet received during
-				  * CheckForHang.
-				  */
-	u8 idle_count; /* (KEEP_ALIVE_INTERVAL / CHECK_FOR_HANG_PERIOD) */
-	u32 last_num_tx_unicast;
-	u32 last_num_rx_unicast;
-
-	bool b_busy_traffic; /* when it is set to 1, UI cann't scan at will. */
-};
-
-/* YJ,modified,080828,end */
-
-/* by amy for led
- * ==========================================================================
- * LED customization.
- * ==========================================================================
- */
-enum led_strategy_8185 {
-	SW_LED_MODE0,
-	SW_LED_MODE1,
-	HW_LED, /* HW control 2 LEDs, LED0 and LED1 (there are 4 different
-		 * control modes). */
-};
-
-enum rt_rf_power_state {
-	RF_ON,
-	RF_SLEEP,
-	RF_OFF
-};
-
-enum _ReasonCode {
-	unspec_reason = 0x1,
-	auth_not_valid = 0x2,
-	deauth_lv_ss = 0x3,
-	inactivity = 0x4,
-	ap_overload = 0x5,
-	class2_err = 0x6,
-	class3_err = 0x7,
-	disas_lv_ss = 0x8,
-	asoc_not_auth = 0x9,
-
-	/* ----MIC_CHECK */
-	mic_failure = 0xe,
-	/* ----END MIC_CHECK */
-
-	/* Reason code defined in 802.11i D10.0 p.28. */
-	invalid_IE = 0x0d,
-	four_way_tmout = 0x0f,
-	two_way_tmout = 0x10,
-	IE_dismatch = 0x11,
-	invalid_Gcipher	= 0x12,
-	invalid_Pcipher	= 0x13,
-	invalid_AKMP = 0x14,
-	unsup_RSNIEver = 0x15,
-	invalid_RSNIE = 0x16,
-	auth_802_1x_fail = 0x17,
-	ciper_reject = 0x18,
-
-	/* Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie,
-	 * 2005-11-15.
-	 */
-	QoS_unspec = 0x20, /* 32 */
-	QAP_bandwidth = 0x21, /* 33 */
-	poor_condition = 0x22, /* 34 */
-	no_facility = 0x23, /* 35 */
-	/* Where is 36??? */
-	req_declined = 0x25, /* 37 */
-	invalid_param = 0x26, /* 38 */
-	req_not_honored = 0x27, /* 39 */
-	TS_not_created = 0x2F, /* 47 */
-	DL_not_allowed = 0x30, /* 48 */
-	dest_not_exist = 0x31, /* 49 */
-	dest_not_QSTA = 0x32, /* 50 */
-};
-
-enum rt_ps_mode {
-	ACTIVE, /* Active/Continuous access. */
-	MAX_PS,	/* Max power save mode. */
-	FAST_PS /* Fast power save mode. */
-};
-
-/* by amy for power save. */
-struct r8180_priv {
-	struct pci_dev *pdev;
-
-	short epromtype;
-	int irq;
-	struct ieee80211_device *ieee80211;
-
-	short plcp_preamble_mode; /* 0:auto 1:short 2:long */
-
-	spinlock_t irq_th_lock;
-	spinlock_t tx_lock;
-	spinlock_t ps_lock;
-	spinlock_t rf_ps_lock;
-
-	u16 irq_mask;
-	short irq_enabled;
-	struct net_device *dev;
-	short chan;
-	short sens;
-	short max_sens;
-	u8 chtxpwr[15]; /* channels from 1 to 14, 0 not used. */
-	u8 chtxpwr_ofdm[15]; /* channels from 1 to 14, 0 not used. */
-	u8 channel_plan;  /* it's the channel plan index. */
-	short up;
-	short crcmon; /* if 1 allow bad crc frame reception in monitor mode. */
-
-	struct timer_list scan_timer;
-	spinlock_t scan_lock;
-	u8 active_probe;
-	struct semaphore wx_sem;
-	short hw_wep;
-
-	short digphy;
-	short antb;
-	short diversity;
-	u32 key0[4];
-	short (*rf_set_sens)(struct net_device *dev, short sens);
-	void (*rf_set_chan)(struct net_device *dev, short ch);
-	void (*rf_close)(struct net_device *dev);
-	void (*rf_init)(struct net_device *dev);
-	void (*rf_sleep)(struct net_device *dev);
-	void (*rf_wakeup)(struct net_device *dev);
-	/* short rate; */
-	short promisc;
-	/* stats */
-	struct stats stats;
-	struct link_detect_t link_detect; /* YJ,add,080828 */
-	struct iw_statistics wstats;
-
-	/* RX stuff. */
-	u32 *rxring;
-	u32 *rxringtail;
-	dma_addr_t rxringdma;
-	struct buffer *rxbuffer;
-	struct buffer *rxbufferhead;
-	int rxringcount;
-	u16 rxbuffersize;
-
-	struct sk_buff *rx_skb;
-
-	short rx_skb_complete;
-
-	u32 rx_prevlen;
-
-	u32 *txmapring;
-	u32 *txbkpring;
-	u32 *txbepring;
-	u32 *txvipring;
-	u32 *txvopring;
-	u32 *txhpring;
-	dma_addr_t txmapringdma;
-	dma_addr_t txbkpringdma;
-	dma_addr_t txbepringdma;
-	dma_addr_t txvipringdma;
-	dma_addr_t txvopringdma;
-	dma_addr_t txhpringdma;
-	u32 *txmapringtail;
-	u32 *txbkpringtail;
-	u32 *txbepringtail;
-	u32 *txvipringtail;
-	u32 *txvopringtail;
-	u32 *txhpringtail;
-	u32 *txmapringhead;
-	u32 *txbkpringhead;
-	u32 *txbepringhead;
-	u32 *txvipringhead;
-	u32 *txvopringhead;
-	u32 *txhpringhead;
-	struct buffer *txmapbufs;
-	struct buffer *txbkpbufs;
-	struct buffer *txbepbufs;
-	struct buffer *txvipbufs;
-	struct buffer *txvopbufs;
-	struct buffer *txhpbufs;
-	struct buffer *txmapbufstail;
-	struct buffer *txbkpbufstail;
-	struct buffer *txbepbufstail;
-	struct buffer *txvipbufstail;
-	struct buffer *txvopbufstail;
-	struct buffer *txhpbufstail;
-
-	int txringcount;
-	int txbuffsize;
-	struct tasklet_struct irq_rx_tasklet;
-	u8 dma_poll_mask;
-
-	/* adhoc/master mode stuff. */
-	u32 *txbeaconringtail;
-	dma_addr_t txbeaconringdma;
-	u32 *txbeaconring;
-	int txbeaconcount;
-	struct buffer *txbeaconbufs;
-	struct buffer *txbeaconbufstail;
-
-	u8 retry_data;
-	u8 retry_rts;
-	u16 rts;
-
-	/* by amy for led. */
-	enum led_strategy_8185 led_strategy;
-	/* by amy for led. */
-
-	/* by amy for power save. */
-	struct timer_list watch_dog_timer;
-	bool bInactivePs;
-	bool bSwRfProcessing;
-	enum rt_rf_power_state eInactivePowerState;
-	enum rt_rf_power_state eRFPowerState;
-	u32 RfOffReason;
-	bool RFChangeInProgress;
-	bool SetRFPowerStateInProgress;
-	u8 RFProgType;
-	bool bLeisurePs;
-	enum rt_ps_mode dot11PowerSaveMode;
-	u8 TxPollingTimes;
-
-	bool bApBufOurFrame; /* TRUE if AP buffer our unicast data , we will
-			      * keep eAwake until receive data or timeout.
-			      */
-	u8 WaitBufDataBcnCount;
-	u8 WaitBufDataTimeOut;
-
-	/* by amy for power save. */
-	/* by amy for antenna. */
-	u8 EEPROMSwAntennaDiversity;
-	bool EEPROMDefaultAntenna1;
-	u8 RegSwAntennaDiversityMechanism;
-	bool bSwAntennaDiverity;
-	u8 RegDefaultAntenna;
-	bool bDefaultAntenna1;
-	u8 SignalStrength;
-	long Stats_SignalStrength;
-	long LastSignalStrengthInPercent; /* In percentage, used for smoothing,
-					   * e.g. Moving Average.
-					   */
-	u8 SignalQuality; /* in 0-100 index. */
-	long Stats_SignalQuality;
-	long RecvSignalPower; /* in dBm. */
-	long Stats_RecvSignalPower;
-	u8 LastRxPktAntenna; /* +by amy 080312 Antenna which received the lasted
-			      * packet. 0: Aux, 1:Main. Added by Roger,
-			      * 2008.01.25.
-			      */
-	u32 AdRxOkCnt;
-	long AdRxSignalStrength;
-	u8 CurrAntennaIndex; /* Index to current Antenna (both Tx and Rx). */
-	u8 AdTickCount; /* Times of SwAntennaDiversityTimer happened. */
-	u8 AdCheckPeriod; /* # of period SwAntennaDiversityTimer to check Rx
-			   * signal strength for SW Antenna Diversity.
-			   */
-	u8 AdMinCheckPeriod; /* Min value of AdCheckPeriod. */
-	u8 AdMaxCheckPeriod; /* Max value of AdCheckPeriod. */
-	long AdRxSsThreshold; /* Signal strength threshold to switch antenna. */
-	long AdMaxRxSsThreshold; /* Max value of AdRxSsThreshold. */
-	bool bAdSwitchedChecking; /* TRUE if we shall shall check Rx signal
-				   * strength for last time switching antenna.
-				   */
-	long AdRxSsBeforeSwitched; /* Rx signal strength before we switched
-				    * antenna.
-				    */
-	struct timer_list SwAntennaDiversityTimer;
-	/* by amy for antenna {by amy 080312 */
-
-	/* Crystal calibration. Added by Roger, 2007.12.11. */
-
-	bool bXtalCalibration; /* Crystal calibration.*/
-	u8 XtalCal_Xin; /* Crystal calibration for Xin. 0~7.5pF */
-	u8 XtalCal_Xout; /* Crystal calibration for Xout. 0~7.5pF */
-
-	/* Tx power tracking with thermal meter indication.
-	 * Added by Roger, 2007.12.11.
-	 */
-
-	bool bTxPowerTrack; /* Tx Power tracking. */
-	u8 ThermalMeter; /* Thermal meter reference indication. */
-
-	/* Dynamic Initial Gain Adjustment Mechanism. Added by Bruce,
-	 * 2007-02-14.
-	 */
-	bool bDigMechanism; /* TRUE if DIG is enabled, FALSE ow. */
-	bool bRegHighPowerMechanism; /* For High Power Mechanism. 061010,
-				      * by rcnjko.
-				      */
-	u32 FalseAlarmRegValue;
-	u8 RegDigOfdmFaUpTh; /* Upper threshold of OFDM false alarm, which is
-			      * used in DIG.
-			      */
-	u8 DIG_NumberFallbackVote;
-	u8 DIG_NumberUpgradeVote;
-	/* For HW antenna diversity, added by Roger, 2008.01.30. */
-	u32 AdMainAntennaRxOkCnt; /* Main antenna Rx OK count. */
-	u32 AdAuxAntennaRxOkCnt; /* Aux antenna Rx OK count. */
-	bool bHWAdSwitched; /* TRUE if we has switched default antenna by HW
-			     * evaluation.
-			     */
-	/* RF High Power upper/lower threshold. */
-	u8 RegHiPwrUpperTh;
-	u8 RegHiPwrLowerTh;
-	/* RF RSSI High Power upper/lower Threshold. */
-	u8 RegRSSIHiPwrUpperTh;
-	u8 RegRSSIHiPwrLowerTh;
-	/* Current CCK RSSI value to determine CCK high power, asked by SD3 DZ,
-	 * by Bruce, 2007-04-12.
-	 */
-	u8 CurCCKRSSI;
-	bool bCurCCKPkt;
-	/* High Power Mechanism. Added by amy, 080312. */
-	bool bToUpdateTxPwr;
-	long UndecoratedSmoothedSS;
-	long UndecoratedSmoothedRxPower;
-	u8 RSSI;
-	char RxPower;
-	u8 InitialGain;
-	/* For adjust Dig Threshold during Legacy/Leisure Power Save Mode. */
-	u32 DozePeriodInPast2Sec;
-	/* Don't access BB/RF under disable PLL situation. */
-	u8 InitialGainBackUp;
-	u8 RegBModeGainStage;
-	/* by amy for rate adaptive */
-	struct timer_list rateadapter_timer;
-	u32 RateAdaptivePeriod;
-	bool bEnhanceTxPwr;
-	bool bUpdateARFR;
-	int ForcedDataRate; /* Force Data Rate. 0: Auto, 0x02: 1M ~ 0x6C: 54M.)
-			     */
-	u32 NumTxUnicast; /* YJ,add,080828,for keep alive. */
-	u8 keepAliveLevel; /*YJ,add,080828,for KeepAlive. */
-	unsigned long NumTxOkTotal;
-	u16 LastRetryCnt;
-	u16 LastRetryRate;
-	unsigned long LastTxokCnt;
-	unsigned long LastRxokCnt;
-	u16 CurrRetryCnt;
-	unsigned long LastTxOKBytes;
-	unsigned long NumTxOkBytesTotal;
-	u8 LastFailTxRate;
-	long LastFailTxRateSS;
-	u8 FailTxRateCount;
-	u32 LastTxThroughput;
-	/* for up rate. */
-	unsigned short bTryuping;
-	u8 CurrTxRate; /* the rate before up. */
-	u16 CurrRetryRate;
-	u16 TryupingCount;
-	u8 TryDownCountLowData;
-	u8 TryupingCountNoData;
-
-	u8 CurrentOperaRate;
-	struct work_struct reset_wq;
-	struct work_struct watch_dog_wq;
-	short ack_tx_to_ieee;
-
-	u8 dma_poll_stop_mask;
-
-	u16 ShortRetryLimit;
-	u16 LongRetryLimit;
-	u16 EarlyRxThreshold;
-	u32 TransmitConfig;
-	u32 ReceiveConfig;
-	u32 IntrMask;
-
-	struct chnl_access_setting ChannelAccessSetting;
-};
-
-#define MANAGE_PRIORITY 0
-#define BK_PRIORITY 1
-#define BE_PRIORITY 2
-#define VI_PRIORITY 3
-#define VO_PRIORITY 4
-#define HI_PRIORITY 5
-#define BEACON_PRIORITY 6
-
-#define LOW_PRIORITY VI_PRIORITY
-#define NORM_PRIORITY VO_PRIORITY
-/* AC2Queue mapping. */
-#define AC2Q(_ac) (((_ac) == WME_AC_VO) ? VO_PRIORITY : \
-		((_ac) == WME_AC_VI) ? VI_PRIORITY : \
-		((_ac) == WME_AC_BK) ? BK_PRIORITY : \
-		BE_PRIORITY)
-
-short rtl8180_tx(struct net_device *dev, u8 *skbuf, int len, int priority,
-		 bool morefrag, short fragdesc, int rate);
-
-u8 read_nic_byte(struct net_device *dev, int x);
-u32 read_nic_dword(struct net_device *dev, int x);
-u16 read_nic_word(struct net_device *dev, int x);
-void write_nic_byte(struct net_device *dev, int x, u8 y);
-void write_nic_word(struct net_device *dev, int x, u16 y);
-void write_nic_dword(struct net_device *dev, int x, u32 y);
-void force_pci_posting(struct net_device *dev);
-
-void rtl8180_rtx_disable(struct net_device *);
-void rtl8180_set_anaparam(struct net_device *dev, u32 a);
-void rtl8185_set_anaparam2(struct net_device *dev, u32 a);
-void rtl8180_set_hw_wep(struct net_device *dev);
-void rtl8180_no_hw_wep(struct net_device *dev);
-void rtl8180_update_msr(struct net_device *dev);
-void rtl8180_beacon_tx_disable(struct net_device *dev);
-void rtl8180_beacon_rx_disable(struct net_device *dev);
-int rtl8180_down(struct net_device *dev);
-int rtl8180_up(struct net_device *dev);
-void rtl8180_commit(struct net_device *dev);
-void rtl8180_set_chan(struct net_device *dev, short ch);
-void write_phy(struct net_device *dev, u8 adr, u8 data);
-void write_phy_cck(struct net_device *dev, u8 adr, u32 data);
-void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
-void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
-void rtl8185_rf_pins_enable(struct net_device *dev);
-void IPSEnter(struct net_device *dev);
-void IPSLeave(struct net_device *dev);
-int get_curr_tx_free_desc(struct net_device *dev, int priority);
-void UpdateInitialGain(struct net_device *dev);
-bool SetAntennaConfig87SE(struct net_device *dev, u8 DefaultAnt,
-			  bool bAntDiversity);
-
-void rtl8185b_adapter_start(struct net_device *dev);
-void rtl8185b_rx_enable(struct net_device *dev);
-void rtl8185b_tx_enable(struct net_device *dev);
-void rtl8180_reset(struct net_device *dev);
-void rtl8185b_irq_enable(struct net_device *dev);
-void fix_rx_fifo(struct net_device *dev);
-void fix_tx_fifo(struct net_device *dev);
-void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch);
-void rtl8180_rate_adapter(struct work_struct *work);
-bool MgntActSet_RF_State(struct net_device *dev, enum rt_rf_power_state StateToSet,
-			 u32 ChangeSource);
-
-#endif
-
-/* fun with the built-in ieee80211 stack... */
-extern int ieee80211_crypto_init(void);
-extern void ieee80211_crypto_deinit(void);
-extern int ieee80211_crypto_tkip_init(void);
-extern void ieee80211_crypto_tkip_exit(void);
-extern int ieee80211_crypto_ccmp_init(void);
-extern void ieee80211_crypto_ccmp_exit(void);
-extern int ieee80211_crypto_wep_init(void);
-extern void ieee80211_crypto_wep_exit(void);
diff --git a/drivers/staging/rtl8187se/r8180_93cx6.h b/drivers/staging/rtl8187se/r8180_93cx6.h
deleted file mode 100644
index b52b5b0610ab..000000000000
--- a/drivers/staging/rtl8187se/r8180_93cx6.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
-	This is part of rtl8180 OpenSource driver
-	Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
-	Released under the terms of GPL (General Public Licence)
-
-	Parts of this driver are based on the GPL part of the official realtek driver
-	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
-	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
-	We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
-*/
-
-/*This files contains card eeprom (93c46 or 93c56) programming routines*/
-/*memory is addressed by WORDS*/
-
-#include "r8180.h"
-#include "r8180_hw.h"
-
-#define EPROM_DELAY 10
-
-#define EPROM_ANAPARAM_ADDRLWORD 0xd
-#define EPROM_ANAPARAM_ADDRHWORD 0xe
-
-#define RFCHIPID 0x6
-#define	RFCHIPID_INTERSIL 1
-#define	RFCHIPID_RFMD 2
-#define	RFCHIPID_PHILIPS 3
-#define	RFCHIPID_MAXIM 4
-#define	RFCHIPID_GCT 5
-#define RFCHIPID_RTL8225 9
-#define RF_ZEBRA2 11
-#define EPROM_TXPW_BASE 0x05
-#define RF_ZEBRA4 12
-#define RFCHIPID_RTL8255 0xa
-#define RF_PARAM 0x19
-#define RF_PARAM_DIGPHY_SHIFT 0
-#define RF_PARAM_ANTBDEFAULT_SHIFT 1
-#define RF_PARAM_CARRIERSENSE_SHIFT 2
-#define RF_PARAM_CARRIERSENSE_MASK (3<<2)
-#define ENERGY_TRESHOLD 0x17
-#define EPROM_VERSION 0x1E
-#define MAC_ADR 0x7
-
-#define CIS 0x18
-
-#define	EPROM_TXPW_OFDM_CH1_2 0x20
-
-#define	EPROM_TXPW_CH1_2 0x30
-
-#define RTL818X_EEPROM_CMD_READ		(1 << 0)
-#define RTL818X_EEPROM_CMD_WRITE	(1 << 1)
-#define RTL818X_EEPROM_CMD_CK		(1 << 2)
-#define RTL818X_EEPROM_CMD_CS		(1 << 3)
-
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
deleted file mode 100644
index a6022d4e7573..000000000000
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ /dev/null
@@ -1,3775 +0,0 @@
-/*
- * This is part of rtl818x pci OpenSource driver - v 0.1
- * Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
- * Released under the terms of GPL (General Public License)
- *
- * Parts of this driver are based on the GPL part of the official
- * Realtek driver.
- *
- * Parts of this driver are based on the rtl8180 driver skeleton
- * from Patric Schenke & Andres Salomon.
- *
- * Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
- *
- * Parts of BB/RF code are derived from David Young rtl8180 netbsd driver.
- *
- * RSSI calc function from 'The Deuce'
- *
- * Some ideas borrowed from the 8139too.c driver included in linux kernel.
- *
- * We (I?) want to thanks the Authors of those projecs and also the
- * Ndiswrapper's project Authors.
- *
- * A big big thanks goes also to Realtek corp. for their help in my attempt to
- * add RTL8185 and RTL8225 support, and to David Young also.
- *
- * Power management interface routines.
- * Written by Mariusz Matuszek.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#undef RX_DONT_PASS_UL
-#undef DUMMY_RX
-
-#include <linux/slab.h>
-#include <linux/syscalls.h>
-#include <linux/eeprom_93cx6.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-#include "r8180_hw.h"
-#include "r8180.h"
-#include "r8180_rtl8225.h" /* RTL8225 Radio frontend */
-#include "r8180_93cx6.h"   /* Card EEPROM */
-#include "r8180_wx.h"
-#include "r8180_dm.h"
-
-#include "ieee80211/dot11d.h"
-
-static struct pci_device_id rtl8180_pci_id_tbl[] = {
-	{
-		.vendor = PCI_VENDOR_ID_REALTEK,
-		.device = 0x8199,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = 0,
-	},
-	{
-		.vendor = 0,
-		.device = 0,
-		.subvendor = 0,
-		.subdevice = 0,
-		.driver_data = 0,
-	}
-};
-
-static char ifname[IFNAMSIZ] = "wlan%d";
-static int hwwep;
-
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, rtl8180_pci_id_tbl);
-MODULE_AUTHOR("Andrea Merello <andrea.merello@gmail.com>");
-MODULE_DESCRIPTION("Linux driver for Realtek RTL8187SE WiFi cards");
-
-module_param_string(ifname, ifname, sizeof(ifname), S_IRUGO|S_IWUSR);
-module_param(hwwep, int, S_IRUGO|S_IWUSR);
-
-MODULE_PARM_DESC(hwwep, " Try to use hardware WEP support. Still broken and not available on all cards");
-
-static int rtl8180_pci_probe(struct pci_dev *pdev,
-			     const struct pci_device_id *id);
-
-static void rtl8180_pci_remove(struct pci_dev *pdev);
-
-static void rtl8180_shutdown(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	if (dev->netdev_ops->ndo_stop)
-		dev->netdev_ops->ndo_stop(dev);
-	pci_disable_device(pdev);
-}
-
-static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-
-	if (!netif_running(dev))
-		goto out_pci_suspend;
-
-	if (dev->netdev_ops->ndo_stop)
-		dev->netdev_ops->ndo_stop(dev);
-
-	netif_device_detach(dev);
-
-out_pci_suspend:
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-	return 0;
-}
-
-static int rtl8180_resume(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	int err;
-	u32 val;
-
-	pci_set_power_state(pdev, PCI_D0);
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "pci_enable_device failed on resume\n");
-
-		return err;
-	}
-
-	pci_restore_state(pdev);
-
-	/*
-	 * Suspend/Resume resets the PCI configuration space, so we have to
-	 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
-	 * from interfering with C3 CPU state. pci_restore_state won't help
-	 * here since it only restores the first 64 bytes pci config header.
-	 */
-	pci_read_config_dword(pdev, 0x40, &val);
-	if ((val & 0x0000ff00) != 0)
-		pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-
-	if (!netif_running(dev))
-		goto out;
-
-	if (dev->netdev_ops->ndo_open)
-		dev->netdev_ops->ndo_open(dev);
-
-	netif_device_attach(dev);
-out:
-	return 0;
-}
-
-static struct pci_driver rtl8180_pci_driver = {
-	.name		= RTL8180_MODULE_NAME,
-	.id_table	= rtl8180_pci_id_tbl,
-	.probe		= rtl8180_pci_probe,
-	.remove		= rtl8180_pci_remove,
-	.suspend	= rtl8180_suspend,
-	.resume		= rtl8180_resume,
-	.shutdown	= rtl8180_shutdown,
-};
-
-u8 read_nic_byte(struct net_device *dev, int x)
-{
-	return 0xff&readb((u8 __iomem *)dev->mem_start + x);
-}
-
-u32 read_nic_dword(struct net_device *dev, int x)
-{
-	return readl((u8 __iomem *)dev->mem_start + x);
-}
-
-u16 read_nic_word(struct net_device *dev, int x)
-{
-	return readw((u8 __iomem *)dev->mem_start + x);
-}
-
-void write_nic_byte(struct net_device *dev, int x, u8 y)
-{
-	writeb(y, (u8 __iomem *)dev->mem_start + x);
-	udelay(20);
-}
-
-void write_nic_dword(struct net_device *dev, int x, u32 y)
-{
-	writel(y, (u8 __iomem *)dev->mem_start + x);
-	udelay(20);
-}
-
-void write_nic_word(struct net_device *dev, int x, u16 y)
-{
-	writew(y, (u8 __iomem *)dev->mem_start + x);
-	udelay(20);
-}
-
-inline void force_pci_posting(struct net_device *dev)
-{
-	read_nic_byte(dev, EPROM_CMD);
-	mb();
-}
-
-static irqreturn_t rtl8180_interrupt(int irq, void *netdev);
-void set_nic_rxring(struct net_device *dev);
-void set_nic_txring(struct net_device *dev);
-static struct net_device_stats *rtl8180_stats(struct net_device *dev);
-void rtl8180_commit(struct net_device *dev);
-void rtl8180_start_tx_beacon(struct net_device *dev);
-
-static struct proc_dir_entry *rtl8180_proc;
-
-static int proc_get_registers(struct seq_file *m, void *v)
-{
-	struct net_device *dev = m->private;
-	int i, n, max = 0xff;
-
-	/* This dump the current register page */
-	for (n = 0; n <= max;) {
-		seq_printf(m, "\nD:  %2x > ", n);
-
-		for (i = 0; i < 16 && n <= max; i++, n++)
-			seq_printf(m, "%2x ", read_nic_byte(dev, n));
-	}
-	seq_putc(m, '\n');
-	return 0;
-}
-
-int get_curr_tx_free_desc(struct net_device *dev, int priority);
-
-static int proc_get_stats_hw(struct seq_file *m, void *v)
-{
-	return 0;
-}
-
-static int proc_get_stats_rx(struct seq_file *m, void *v)
-{
-	struct net_device *dev = m->private;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	seq_printf(m,
-		"RX OK: %lu\n"
-		"RX Retry: %lu\n"
-		"RX CRC Error(0-500): %lu\n"
-		"RX CRC Error(500-1000): %lu\n"
-		"RX CRC Error(>1000): %lu\n"
-		"RX ICV Error: %lu\n",
-		priv->stats.rxint,
-		priv->stats.rxerr,
-		priv->stats.rxcrcerrmin,
-		priv->stats.rxcrcerrmid,
-		priv->stats.rxcrcerrmax,
-		priv->stats.rxicverr
-		);
-
-	return 0;
-}
-
-static int proc_get_stats_tx(struct seq_file *m, void *v)
-{
-	struct net_device *dev = m->private;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	unsigned long totalOK;
-
-	totalOK = priv->stats.txnpokint + priv->stats.txhpokint +
-		priv->stats.txlpokint;
-
-	seq_printf(m,
-		"TX OK: %lu\n"
-		"TX Error: %lu\n"
-		"TX Retry: %lu\n"
-		"TX beacon OK: %lu\n"
-		"TX beacon error: %lu\n",
-		totalOK,
-		priv->stats.txnperr+priv->stats.txhperr+priv->stats.txlperr,
-		priv->stats.txretry,
-		priv->stats.txbeacon,
-		priv->stats.txbeaconerr
-	);
-
-	return 0;
-}
-
-static void rtl8180_proc_module_init(void)
-{
-	DMESG("Initializing proc filesystem");
-	rtl8180_proc = proc_mkdir(RTL8180_MODULE_NAME, init_net.proc_net);
-}
-
-static void rtl8180_proc_module_remove(void)
-{
-	remove_proc_entry(RTL8180_MODULE_NAME, init_net.proc_net);
-}
-
-static void rtl8180_proc_remove_one(struct net_device *dev)
-{
-	remove_proc_subtree(dev->name, rtl8180_proc);
-}
-
-/*
- * seq_file wrappers for procfile show routines.
- */
-static int rtl8180_proc_open(struct inode *inode, struct file *file)
-{
-	struct net_device *dev = proc_get_parent_data(inode);
-	int (*show)(struct seq_file *, void *) = PDE_DATA(inode);
-
-	return single_open(file, show, dev);
-}
-
-static const struct file_operations rtl8180_proc_fops = {
-	.open		= rtl8180_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-/*
- * Table of proc files we need to create.
- */
-struct rtl8180_proc_file {
-	char name[12];
-	int (*show)(struct seq_file *, void *);
-};
-
-static const struct rtl8180_proc_file rtl8180_proc_files[] = {
-	{ "stats-hw",	&proc_get_stats_hw },
-	{ "stats-rx",	&proc_get_stats_rx },
-	{ "stats-tx",	&proc_get_stats_tx },
-	{ "registers",	&proc_get_registers },
-	{ "" }
-};
-
-static void rtl8180_proc_init_one(struct net_device *dev)
-{
-	const struct rtl8180_proc_file *f;
-	struct proc_dir_entry *dir;
-
-	dir = proc_mkdir_data(dev->name, 0, rtl8180_proc, dev);
-	if (!dir) {
-		DMESGE("Unable to initialize /proc/net/r8180/%s\n", dev->name);
-		return;
-	}
-
-	for (f = rtl8180_proc_files; f->name[0]; f++) {
-		if (!proc_create_data(f->name, S_IFREG | S_IRUGO, dir,
-				      &rtl8180_proc_fops, f->show)) {
-			DMESGE("Unable to initialize /proc/net/r8180/%s/%s\n",
-			       dev->name, f->name);
-			return;
-		}
-	}
-}
-
-/*
- * FIXME: check if we can use some standard already-existent
- * data type+functions in kernel.
- */
-
-static short buffer_add(struct buffer **buffer, u32 *buf, dma_addr_t dma,
-			struct buffer **bufferhead)
-{
-	struct buffer *tmp;
-
-	if (!*buffer) {
-
-		*buffer = kmalloc(sizeof(struct buffer), GFP_KERNEL);
-
-		if (*buffer == NULL) {
-			DMESGE("Failed to kmalloc head of TX/RX struct");
-			return -1;
-		}
-		(*buffer)->next = *buffer;
-		(*buffer)->buf = buf;
-		(*buffer)->dma = dma;
-		if (bufferhead != NULL)
-			(*bufferhead) = (*buffer);
-		return 0;
-	}
-	tmp = *buffer;
-
-	while (tmp->next != (*buffer))
-		tmp = tmp->next;
-	tmp->next = kmalloc(sizeof(struct buffer), GFP_KERNEL);
-	if (tmp->next == NULL) {
-		DMESGE("Failed to kmalloc TX/RX struct");
-		return -1;
-	}
-	tmp->next->buf = buf;
-	tmp->next->dma = dma;
-	tmp->next->next = *buffer;
-
-	return 0;
-}
-
-static void buffer_free(struct net_device *dev, struct buffer **buffer, int len,
-		 short consistent)
-{
-
-	struct buffer *tmp, *next;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-
-	if (!*buffer)
-		return;
-
-	tmp = *buffer;
-
-	do {
-		next = tmp->next;
-		if (consistent) {
-			pci_free_consistent(pdev, len,
-				    tmp->buf, tmp->dma);
-		} else {
-			pci_unmap_single(pdev, tmp->dma,
-			len, PCI_DMA_FROMDEVICE);
-			kfree(tmp->buf);
-		}
-		kfree(tmp);
-		tmp = next;
-	} while (next != *buffer);
-
-	*buffer = NULL;
-}
-
-int get_curr_tx_free_desc(struct net_device *dev, int priority)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u32 *tail;
-	u32 *head;
-	int ret;
-
-	switch (priority) {
-	case MANAGE_PRIORITY:
-		head = priv->txmapringhead;
-		tail = priv->txmapringtail;
-		break;
-	case BK_PRIORITY:
-		head = priv->txbkpringhead;
-		tail = priv->txbkpringtail;
-		break;
-	case BE_PRIORITY:
-		head = priv->txbepringhead;
-		tail = priv->txbepringtail;
-		break;
-	case VI_PRIORITY:
-		head = priv->txvipringhead;
-		tail = priv->txvipringtail;
-		break;
-	case VO_PRIORITY:
-		head = priv->txvopringhead;
-		tail = priv->txvopringtail;
-		break;
-	case HI_PRIORITY:
-		head = priv->txhpringhead;
-		tail = priv->txhpringtail;
-		break;
-	default:
-		return -1;
-	}
-
-	if (head <= tail)
-		ret = priv->txringcount - (tail - head)/8;
-	else
-		ret = (head - tail)/8;
-
-	if (ret > priv->txringcount)
-		DMESG("BUG");
-
-	return ret;
-}
-
-static short check_nic_enought_desc(struct net_device *dev, int priority)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = netdev_priv(dev);
-	int requiredbyte;
-	int required;
-
-	requiredbyte = priv->ieee80211->fts +
-		sizeof(struct ieee80211_header_data);
-
-	if (ieee->current_network.QoS_Enable)
-		requiredbyte += 2;
-
-	required = requiredbyte / (priv->txbuffsize-4);
-
-	if (requiredbyte % priv->txbuffsize)
-		required++;
-
-	/* for now we keep two free descriptor as a safety boundary
-	 * between the tail and the head
-	 */
-
-	return required + 2 < get_curr_tx_free_desc(dev, priority);
-}
-
-void fix_tx_fifo(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u32 *tmp;
-	int i;
-
-	for (tmp = priv->txmapring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txbkpring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txbepring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-	for (tmp = priv->txvipring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txvopring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txhpring, i = 0;
-	     i < priv->txringcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	for (tmp = priv->txbeaconring, i = 0;
-	     i < priv->txbeaconcount;
-	     tmp += 8, i++) {
-		*tmp = *tmp & ~(1<<31);
-	}
-
-	priv->txmapringtail = priv->txmapring;
-	priv->txmapringhead = priv->txmapring;
-	priv->txmapbufstail = priv->txmapbufs;
-
-	priv->txbkpringtail = priv->txbkpring;
-	priv->txbkpringhead = priv->txbkpring;
-	priv->txbkpbufstail = priv->txbkpbufs;
-
-	priv->txbepringtail = priv->txbepring;
-	priv->txbepringhead = priv->txbepring;
-	priv->txbepbufstail = priv->txbepbufs;
-
-	priv->txvipringtail = priv->txvipring;
-	priv->txvipringhead = priv->txvipring;
-	priv->txvipbufstail = priv->txvipbufs;
-
-	priv->txvopringtail = priv->txvopring;
-	priv->txvopringhead = priv->txvopring;
-	priv->txvopbufstail = priv->txvopbufs;
-
-	priv->txhpringtail = priv->txhpring;
-	priv->txhpringhead = priv->txhpring;
-	priv->txhpbufstail = priv->txhpbufs;
-
-	priv->txbeaconringtail = priv->txbeaconring;
-	priv->txbeaconbufstail = priv->txbeaconbufs;
-	set_nic_txring(dev);
-
-	ieee80211_reset_queue(priv->ieee80211);
-	priv->ack_tx_to_ieee = 0;
-}
-
-void fix_rx_fifo(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u32 *tmp;
-	struct buffer *rxbuf;
-	u8 rx_desc_size;
-
-	rx_desc_size = 8; /* 4*8 = 32 bytes */
-
-	for (tmp = priv->rxring, rxbuf = priv->rxbufferhead;
-	     (tmp < (priv->rxring)+(priv->rxringcount)*rx_desc_size);
-	     tmp += rx_desc_size, rxbuf = rxbuf->next) {
-		*(tmp+2) = rxbuf->dma;
-		*tmp = *tmp & ~0xfff;
-		*tmp = *tmp | priv->rxbuffersize;
-		*tmp |= (1<<31);
-	}
-
-	priv->rxringtail = priv->rxring;
-	priv->rxbuffer = priv->rxbufferhead;
-	priv->rx_skb_complete = 1;
-	set_nic_rxring(dev);
-}
-
-static void rtl8180_irq_disable(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	write_nic_dword(dev, IMR, 0);
-	force_pci_posting(dev);
-	priv->irq_enabled = 0;
-}
-
-void rtl8180_set_mode(struct net_device *dev, int mode)
-{
-	u8 ecmd;
-
-	ecmd = read_nic_byte(dev, EPROM_CMD);
-	ecmd = ecmd & ~EPROM_CMD_OPERATING_MODE_MASK;
-	ecmd = ecmd | (mode<<EPROM_CMD_OPERATING_MODE_SHIFT);
-	ecmd = ecmd & ~(1<<EPROM_CS_SHIFT);
-	ecmd = ecmd & ~(1<<EPROM_CK_SHIFT);
-	write_nic_byte(dev, EPROM_CMD, ecmd);
-}
-
-void rtl8180_beacon_tx_enable(struct net_device *dev);
-
-void rtl8180_update_msr(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 msr;
-	u32 rxconf;
-
-	msr  = read_nic_byte(dev, MSR);
-	msr &= ~MSR_LINK_MASK;
-
-	rxconf = read_nic_dword(dev, RX_CONF);
-
-	if (priv->ieee80211->state == IEEE80211_LINKED)	{
-		if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
-			msr |= (MSR_LINK_ADHOC<<MSR_LINK_SHIFT);
-		else if (priv->ieee80211->iw_mode == IW_MODE_MASTER)
-			msr |= (MSR_LINK_MASTER<<MSR_LINK_SHIFT);
-		else if (priv->ieee80211->iw_mode == IW_MODE_INFRA)
-			msr |= (MSR_LINK_MANAGED<<MSR_LINK_SHIFT);
-		else
-			msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
-		rxconf |= (1<<RX_CHECK_BSSID_SHIFT);
-
-	} else {
-		msr |= (MSR_LINK_NONE<<MSR_LINK_SHIFT);
-		rxconf &= ~(1<<RX_CHECK_BSSID_SHIFT);
-	}
-
-	write_nic_byte(dev, MSR, msr);
-	write_nic_dword(dev, RX_CONF, rxconf);
-}
-
-void rtl8180_set_chan(struct net_device *dev, short ch)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	if ((ch > 14) || (ch < 1)) {
-		netdev_err(dev, "In %s: Invalid channel %d\n", __func__, ch);
-		return;
-	}
-
-	priv->chan = ch;
-	priv->rf_set_chan(dev, priv->chan);
-}
-
-void set_nic_txring(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	write_nic_dword(dev, TX_MANAGEPRIORITY_RING_ADDR, priv->txmapringdma);
-	write_nic_dword(dev, TX_BKPRIORITY_RING_ADDR, priv->txbkpringdma);
-	write_nic_dword(dev, TX_BEPRIORITY_RING_ADDR, priv->txbepringdma);
-	write_nic_dword(dev, TX_VIPRIORITY_RING_ADDR, priv->txvipringdma);
-	write_nic_dword(dev, TX_VOPRIORITY_RING_ADDR, priv->txvopringdma);
-	write_nic_dword(dev, TX_HIGHPRIORITY_RING_ADDR, priv->txhpringdma);
-	write_nic_dword(dev, TX_BEACON_RING_ADDR, priv->txbeaconringdma);
-}
-
-void rtl8180_beacon_tx_enable(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	priv->dma_poll_stop_mask &= ~(TPPOLLSTOP_BQ);
-	write_nic_byte(dev, TPPollStop, priv->dma_poll_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-void rtl8180_beacon_tx_disable(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	priv->dma_poll_stop_mask |= TPPOLLSTOP_BQ;
-	write_nic_byte(dev, TPPollStop, priv->dma_poll_stop_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-}
-
-void rtl8180_rtx_disable(struct net_device *dev)
-{
-	u8 cmd;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	cmd = read_nic_byte(dev, CMD);
-	write_nic_byte(dev, CMD, cmd &
-		       ~((1<<CMD_RX_ENABLE_SHIFT)|(1<<CMD_TX_ENABLE_SHIFT)));
-	force_pci_posting(dev);
-	mdelay(10);
-
-	if (!priv->rx_skb_complete)
-		dev_kfree_skb_any(priv->rx_skb);
-}
-
-static short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count,
-				int addr)
-{
-	int i;
-	u32 *desc;
-	u32 *tmp;
-	dma_addr_t dma_desc, dma_tmp;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-	void *buf;
-
-	if ((bufsize & 0xfff) != bufsize) {
-		DMESGE("TX buffer allocation too large");
-		return 0;
-	}
-	desc = (u32 *)pci_alloc_consistent(pdev,
-					  sizeof(u32)*8*count+256, &dma_desc);
-	if (desc == NULL)
-		return -1;
-
-	if (dma_desc & 0xff)
-		/*
-		 * descriptor's buffer must be 256 byte aligned
-		 * we shouldn't be here, since we set DMA mask !
-		 */
-		WARN(1, "DMA buffer is not aligned\n");
-
-	tmp = desc;
-
-	for (i = 0; i < count; i++) {
-		buf = (void *)pci_alloc_consistent(pdev, bufsize, &dma_tmp);
-		if (buf == NULL)
-			return -ENOMEM;
-
-		switch (addr) {
-		case TX_MANAGEPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txmapbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer NP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_BKPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txbkpbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer LP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_BEPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txbepbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer NP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_VIPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txvipbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer LP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_VOPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txvopbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer NP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_HIGHPRIORITY_RING_ADDR:
-			if (-1 == buffer_add(&priv->txhpbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer HP");
-				return -ENOMEM;
-			}
-			break;
-		case TX_BEACON_RING_ADDR:
-			if (-1 == buffer_add(&priv->txbeaconbufs,
-				buf, dma_tmp, NULL)) {
-				DMESGE("Unable to allocate mem for buffer BP");
-				return -ENOMEM;
-			}
-			break;
-		}
-		*tmp = *tmp & ~(1<<31); /* descriptor empty, owned by the drv */
-		*(tmp+2) = (u32)dma_tmp;
-		*(tmp+3) = bufsize;
-
-		if (i+1 < count)
-			*(tmp+4) = (u32)dma_desc+((i+1)*8*4);
-		else
-			*(tmp+4) = (u32)dma_desc;
-
-		tmp = tmp+8;
-	}
-
-	switch (addr) {
-	case TX_MANAGEPRIORITY_RING_ADDR:
-		priv->txmapringdma = dma_desc;
-		priv->txmapring = desc;
-		break;
-	case TX_BKPRIORITY_RING_ADDR:
-		priv->txbkpringdma = dma_desc;
-		priv->txbkpring = desc;
-		break;
-	case TX_BEPRIORITY_RING_ADDR:
-		priv->txbepringdma = dma_desc;
-		priv->txbepring = desc;
-		break;
-	case TX_VIPRIORITY_RING_ADDR:
-		priv->txvipringdma = dma_desc;
-		priv->txvipring = desc;
-		break;
-	case TX_VOPRIORITY_RING_ADDR:
-		priv->txvopringdma = dma_desc;
-		priv->txvopring = desc;
-		break;
-	case TX_HIGHPRIORITY_RING_ADDR:
-		priv->txhpringdma = dma_desc;
-		priv->txhpring = desc;
-		break;
-	case TX_BEACON_RING_ADDR:
-		priv->txbeaconringdma = dma_desc;
-		priv->txbeaconring = desc;
-		break;
-
-	}
-
-	return 0;
-}
-
-static void free_tx_desc_rings(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-	int count = priv->txringcount;
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txmapring, priv->txmapringdma);
-	buffer_free(dev, &(priv->txmapbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txbkpring, priv->txbkpringdma);
-	buffer_free(dev, &(priv->txbkpbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txbepring, priv->txbepringdma);
-	buffer_free(dev, &(priv->txbepbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txvipring, priv->txvipringdma);
-	buffer_free(dev, &(priv->txvipbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txvopring, priv->txvopringdma);
-	buffer_free(dev, &(priv->txvopbufs), priv->txbuffsize, 1);
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txhpring, priv->txhpringdma);
-	buffer_free(dev, &(priv->txhpbufs), priv->txbuffsize, 1);
-
-	count = priv->txbeaconcount;
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->txbeaconring, priv->txbeaconringdma);
-	buffer_free(dev, &(priv->txbeaconbufs), priv->txbuffsize, 1);
-}
-
-static void free_rx_desc_ring(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-	int count = priv->rxringcount;
-
-	pci_free_consistent(pdev, sizeof(u32)*8*count+256,
-			    priv->rxring, priv->rxringdma);
-
-	buffer_free(dev, &(priv->rxbuffer), priv->rxbuffersize, 0);
-}
-
-static short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count)
-{
-	int i;
-	u32 *desc;
-	u32 *tmp;
-	dma_addr_t dma_desc, dma_tmp;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct pci_dev *pdev = priv->pdev;
-	void *buf;
-	u8 rx_desc_size;
-
-	rx_desc_size = 8; /* 4*8 = 32 bytes */
-
-	if ((bufsize & 0xfff) != bufsize) {
-		DMESGE("RX buffer allocation too large");
-		return -1;
-	}
-
-	desc = (u32 *)pci_alloc_consistent(pdev,
-		sizeof(u32) * rx_desc_size * count + 256, &dma_desc);
-
-	if (dma_desc & 0xff)
-		/*
-		 * descriptor's buffer must be 256 byte aligned
-		 * should never happen since we specify the DMA mask
-		 */
-		WARN(1, "DMA buffer is not aligned\n");
-
-	priv->rxring = desc;
-	priv->rxringdma = dma_desc;
-	tmp = desc;
-
-	for (i = 0; i < count; i++) {
-		buf = kmalloc(bufsize * sizeof(u8), GFP_ATOMIC);
-		if (buf == NULL) {
-			DMESGE("Failed to kmalloc RX buffer");
-			return -1;
-		}
-
-		dma_tmp = pci_map_single(pdev, buf, bufsize * sizeof(u8),
-					 PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(pdev, dma_tmp))
-			return -1;
-		if (-1 == buffer_add(&(priv->rxbuffer), buf, dma_tmp,
-			   &(priv->rxbufferhead))) {
-			DMESGE("Unable to allocate mem RX buf");
-			return -1;
-		}
-		*tmp = 0; /* zero pads the header of the descriptor */
-		*tmp = *tmp | (bufsize&0xfff);
-		*(tmp+2) = (u32)dma_tmp;
-		*tmp = *tmp | (1<<31); /* descriptor void, owned by the NIC */
-
-		tmp = tmp+rx_desc_size;
-	}
-
-	/* this is the last descriptor */
-	*(tmp - rx_desc_size) = *(tmp - rx_desc_size) | (1 << 30);
-
-	return 0;
-}
-
-
-void set_nic_rxring(struct net_device *dev)
-{
-	u8 pgreg;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	pgreg = read_nic_byte(dev, PGSELECT);
-	write_nic_byte(dev, PGSELECT, pgreg & ~(1<<PGSELECT_PG_SHIFT));
-
-	write_nic_dword(dev, RXRING_ADDR, priv->rxringdma);
-}
-
-void rtl8180_reset(struct net_device *dev)
-{
-	u8 cr;
-
-	rtl8180_irq_disable(dev);
-
-	cr = read_nic_byte(dev, CMD);
-	cr = cr & 2;
-	cr = cr | (1<<CMD_RST_SHIFT);
-	write_nic_byte(dev, CMD, cr);
-
-	force_pci_posting(dev);
-
-	mdelay(200);
-
-	if (read_nic_byte(dev, CMD) & (1<<CMD_RST_SHIFT))
-		DMESGW("Card reset timeout!");
-	else
-		DMESG("Card successfully reset");
-
-	rtl8180_set_mode(dev, EPROM_CMD_LOAD);
-	force_pci_posting(dev);
-	mdelay(200);
-}
-
-inline u16 ieeerate2rtlrate(int rate)
-{
-	switch (rate) {
-	case 10:
-		return 0;
-	case 20:
-		return 1;
-	case 55:
-		return 2;
-	case 110:
-		return 3;
-	case 60:
-		return 4;
-	case 90:
-		return 5;
-	case 120:
-		return 6;
-	case 180:
-		return 7;
-	case 240:
-		return 8;
-	case 360:
-		return 9;
-	case 480:
-		return 10;
-	case 540:
-		return 11;
-	default:
-		return 3;
-	}
-}
-
-static u16 rtl_rate[] = {10, 20, 55, 110, 60,
-	90, 120, 180, 240, 360, 480, 540, 720};
-
-inline u16 rtl8180_rate2rate(short rate)
-{
-	if (rate > 12)
-		return 10;
-	return rtl_rate[rate];
-}
-
-inline u8 rtl8180_IsWirelessBMode(u16 rate)
-{
-	if (((rate <= 110) && (rate != 60) && (rate != 90)) || (rate == 220))
-		return 1;
-	else
-		return 0;
-}
-
-u16 N_DBPSOfRate(u16 DataRate);
-
-static u16 ComputeTxTime(u16 FrameLength, u16 DataRate, u8 bManagementFrame,
-		  u8 bShortPreamble)
-{
-	u16	FrameTime;
-	u16	N_DBPS;
-	u16	Ceiling;
-
-	if (rtl8180_IsWirelessBMode(DataRate)) {
-		if (bManagementFrame || !bShortPreamble || DataRate == 10)
-			/* long preamble */
-			FrameTime = (u16)(144+48+(FrameLength*8/(DataRate/10)));
-		else
-			/* short preamble */
-			FrameTime = (u16)(72+24+(FrameLength*8/(DataRate/10)));
-
-		if ((FrameLength*8 % (DataRate/10)) != 0) /* get the ceilling */
-			FrameTime++;
-	} else {	/* 802.11g DSSS-OFDM PLCP length field calculation. */
-		N_DBPS = N_DBPSOfRate(DataRate);
-		Ceiling = (16 + 8*FrameLength + 6) / N_DBPS
-				+ (((16 + 8*FrameLength + 6) % N_DBPS) ? 1 : 0);
-		FrameTime = (u16)(16 + 4 + 4*Ceiling + 6);
-	}
-	return FrameTime;
-}
-
-u16 N_DBPSOfRate(u16 DataRate)
-{
-	 u16 N_DBPS = 24;
-
-	switch (DataRate) {
-	case 60:
-		N_DBPS = 24;
-		break;
-	case 90:
-		N_DBPS = 36;
-		break;
-	case 120:
-		N_DBPS = 48;
-		break;
-	case 180:
-		N_DBPS = 72;
-		break;
-	case 240:
-		N_DBPS = 96;
-		break;
-	case 360:
-		N_DBPS = 144;
-		break;
-	case 480:
-		N_DBPS = 192;
-		break;
-	case 540:
-		N_DBPS = 216;
-		break;
-	default:
-		break;
-	}
-
-	return N_DBPS;
-}
-
-/*
- * For Netgear case, they want good-looking signal strength.
- */
-static long NetgearSignalStrengthTranslate(long LastSS, long CurrSS)
-{
-	long RetSS;
-
-	/* Step 1. Scale mapping. */
-	if (CurrSS >= 71 && CurrSS <= 100)
-		RetSS = 90 + ((CurrSS - 70) / 3);
-	else if (CurrSS >= 41 && CurrSS <= 70)
-		RetSS = 78 + ((CurrSS - 40) / 3);
-	else if (CurrSS >= 31 && CurrSS <= 40)
-		RetSS = 66 + (CurrSS - 30);
-	else if (CurrSS >= 21 && CurrSS <= 30)
-		RetSS = 54 + (CurrSS - 20);
-	else if (CurrSS >= 5 && CurrSS <= 20)
-		RetSS = 42 + (((CurrSS - 5) * 2) / 3);
-	else if (CurrSS == 4)
-		RetSS = 36;
-	else if (CurrSS == 3)
-		RetSS = 27;
-	else if (CurrSS == 2)
-		RetSS = 18;
-	else if (CurrSS == 1)
-		RetSS = 9;
-	else
-		RetSS = CurrSS;
-
-	/* Step 2. Smoothing. */
-	if (LastSS > 0)
-		RetSS = ((LastSS * 5) + (RetSS) + 5) / 6;
-
-	return RetSS;
-}
-
-/*
- * Translate 0-100 signal strength index into dBm.
- */
-static long TranslateToDbm8185(u8 SignalStrengthIndex)
-{
-	long SignalPower;
-
-	/* Translate to dBm (x=0.5y-95). */
-	SignalPower = (long)((SignalStrengthIndex + 1) >> 1);
-	SignalPower -= 95;
-
-	return SignalPower;
-}
-
-/*
- * Perform signal smoothing for dynamic mechanism.
- * This is different with PerformSignalSmoothing8185 in smoothing formula.
- * No dramatic adjustment is applied because dynamic mechanism need some
- * degree of correctness. Ported from 8187B.
- */
-static void PerformUndecoratedSignalSmoothing8185(struct r8180_priv *priv,
-						  bool bCckRate)
-{
-	long smoothedSS;
-	long smoothedRx;
-
-	/* Determine the current packet is CCK rate. */
-	priv->bCurCCKPkt = bCckRate;
-
-	smoothedSS = priv->SignalStrength * 10;
-
-	if (priv->UndecoratedSmoothedSS >= 0)
-		smoothedSS = ((priv->UndecoratedSmoothedSS * 5) +
-				smoothedSS) / 6;
-
-	priv->UndecoratedSmoothedSS = smoothedSS;
-
-	smoothedRx = ((priv->UndecoratedSmoothedRxPower * 50) +
-			(priv->RxPower * 11)) / 60;
-
-	priv->UndecoratedSmoothedRxPower = smoothedRx;
-
-	if (bCckRate)
-		priv->CurCCKRSSI = priv->RSSI;
-	else
-		priv->CurCCKRSSI = 0;
-}
-
-
-/*
- * This is rough RX isr handling routine
- */
-static void rtl8180_rx(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct sk_buff *tmp_skb;
-	short first, last;
-	u32 len;
-	int lastlen;
-	unsigned char quality, signal;
-	u8 rate;
-	u32 *tmp, *tmp2;
-	u8 rx_desc_size;
-	u8 padding;
-	char rxpower = 0;
-	u32 RXAGC = 0;
-	long RxAGC_dBm = 0;
-	u8	LNA = 0, BB = 0;
-	u8	LNA_gain[4] = {02, 17, 29, 39};
-	u8  Antenna = 0;
-	struct ieee80211_hdr_4addr *hdr;
-	u16 fc, type;
-	u8 bHwError = 0, bCRC = 0, bICV = 0;
-	bool	bCckRate = false;
-	u8     RSSI = 0;
-	long	SignalStrengthIndex = 0;
-	struct ieee80211_rx_stats stats = {
-		.signal = 0,
-		.noise = -98,
-		.rate = 0,
-		.freq = IEEE80211_24GHZ_BAND,
-	};
-
-	stats.nic_type = NIC_8185B;
-	rx_desc_size = 8;
-
-	if ((*(priv->rxringtail)) & (1<<31)) {
-		/* we have got an RX int, but the descriptor. we are pointing
-		 * is empty.
-		 */
-
-		priv->stats.rxnodata++;
-		priv->ieee80211->stats.rx_errors++;
-
-		tmp2 = NULL;
-		tmp = priv->rxringtail;
-		do {
-			if (tmp == priv->rxring)
-				tmp  = priv->rxring + (priv->rxringcount - 1) *
-					rx_desc_size;
-			else
-				tmp -= rx_desc_size;
-
-			if (!(*tmp & (1<<31)))
-				tmp2 = tmp;
-		} while (tmp != priv->rxring);
-
-		if (tmp2)
-			priv->rxringtail = tmp2;
-	}
-
-	/* while there are filled descriptors */
-	while (!(*(priv->rxringtail) & (1<<31))) {
-		if (*(priv->rxringtail) & (1<<26))
-			DMESGW("RX buffer overflow");
-		if (*(priv->rxringtail) & (1<<12))
-			priv->stats.rxicverr++;
-
-		if (*(priv->rxringtail) & (1<<27)) {
-			priv->stats.rxdmafail++;
-			goto drop;
-		}
-
-		pci_dma_sync_single_for_cpu(priv->pdev,
-				    priv->rxbuffer->dma,
-				    priv->rxbuffersize * sizeof(u8),
-				    PCI_DMA_FROMDEVICE);
-
-		first = *(priv->rxringtail) & (1<<29) ? 1 : 0;
-		if (first)
-			priv->rx_prevlen = 0;
-
-		last = *(priv->rxringtail) & (1<<28) ? 1 : 0;
-		if (last) {
-			lastlen = ((*priv->rxringtail) & 0xfff);
-
-			/* if the last descriptor (that should tell us the total
-			 * packet len) tell us something less than the
-			 * descriptors len we had until now, then there is some
-			 * problem..
-			 * workaround to prevent kernel panic
-			 */
-			if (lastlen < priv->rx_prevlen)
-				len = 0;
-			else
-				len = lastlen-priv->rx_prevlen;
-
-			if (*(priv->rxringtail) & (1<<13)) {
-				if ((*(priv->rxringtail) & 0xfff) < 500)
-					priv->stats.rxcrcerrmin++;
-				else if ((*(priv->rxringtail) & 0x0fff) > 1000)
-					priv->stats.rxcrcerrmax++;
-				else
-					priv->stats.rxcrcerrmid++;
-
-			}
-
-		} else {
-			len = priv->rxbuffersize;
-		}
-
-		if (first && last) {
-			padding = ((*(priv->rxringtail+3))&(0x04000000))>>26;
-		} else if (first) {
-			padding = ((*(priv->rxringtail+3))&(0x04000000))>>26;
-			if (padding)
-				len -= 2;
-		} else {
-			padding = 0;
-		}
-		padding = 0;
-		priv->rx_prevlen += len;
-
-		if (priv->rx_prevlen > MAX_FRAG_THRESHOLD + 100) {
-			/* HW is probably passing several buggy frames without
-			 * FD or LD flag set.
-			 * Throw this garbage away to prevent skb memory
-			 * exhausting
-			 */
-			if (!priv->rx_skb_complete)
-				dev_kfree_skb_any(priv->rx_skb);
-			priv->rx_skb_complete = 1;
-		}
-
-		signal = (unsigned char)((*(priv->rxringtail + 3) &
-			0x00ff0000) >> 16);
-		signal = (signal & 0xfe) >> 1;
-
-		quality = (unsigned char)((*(priv->rxringtail+3)) & (0xff));
-
-		stats.mac_time[0] = *(priv->rxringtail+1);
-		stats.mac_time[1] = *(priv->rxringtail+2);
-
-		rxpower = ((char)((*(priv->rxringtail + 4) &
-			0x00ff0000) >> 16)) / 2 - 42;
-
-		RSSI = ((u8)((*(priv->rxringtail + 3) &
-			0x0000ff00) >> 8)) & 0x7f;
-
-		rate = ((*(priv->rxringtail)) &
-			((1<<23)|(1<<22)|(1<<21)|(1<<20)))>>20;
-
-		stats.rate = rtl8180_rate2rate(rate);
-		Antenna = (*(priv->rxringtail + 3) & 0x00008000) == 0 ? 0 : 1;
-		if (!rtl8180_IsWirelessBMode(stats.rate)) { /* OFDM rate. */
-			RxAGC_dBm = rxpower+1;	/* bias */
-		} else { /* CCK rate. */
-			RxAGC_dBm = signal; /* bit 0 discard */
-
-			LNA = (u8) (RxAGC_dBm & 0x60) >> 5; /* bit 6~ bit 5 */
-			BB  = (u8) (RxAGC_dBm & 0x1F); /* bit 4 ~ bit 0 */
-
-			/* Pin_11b=-(LNA_gain+BB_gain) (dBm) */
-			RxAGC_dBm = -(LNA_gain[LNA] + (BB * 2));
-
-			RxAGC_dBm += 4; /* bias */
-		}
-
-		if (RxAGC_dBm & 0x80) /* absolute value */
-			RXAGC = ~(RxAGC_dBm)+1;
-		bCckRate = rtl8180_IsWirelessBMode(stats.rate);
-		/* Translate RXAGC into 1-100. */
-		if (!rtl8180_IsWirelessBMode(stats.rate)) { /* OFDM rate. */
-			if (RXAGC > 90)
-				RXAGC = 90;
-			else if (RXAGC < 25)
-				RXAGC = 25;
-			RXAGC = (90-RXAGC)*100/65;
-		} else { /* CCK rate. */
-			if (RXAGC > 95)
-				RXAGC = 95;
-			else if (RXAGC < 30)
-				RXAGC = 30;
-			RXAGC = (95-RXAGC)*100/65;
-		}
-		priv->SignalStrength = (u8)RXAGC;
-		priv->RecvSignalPower = RxAGC_dBm;
-		priv->RxPower = rxpower;
-		priv->RSSI = RSSI;
-		/* SQ translation formula is provided by SD3 DZ. 2006.06.27 */
-		if (quality >= 127)
-			/* 0 causes epc to show signal zero, walk around now */
-			quality = 1;
-		else if (quality < 27)
-			quality = 100;
-		else
-			quality = 127 - quality;
-		priv->SignalQuality = quality;
-
-		stats.signal = (u8) quality;
-
-		stats.signalstrength = RXAGC;
-		if (stats.signalstrength > 100)
-			stats.signalstrength = 100;
-		stats.signalstrength = (stats.signalstrength * 70) / 100 + 30;
-		stats.rssi = priv->wstats.qual.qual = priv->SignalQuality;
-		stats.noise = priv->wstats.qual.noise =
-			100 - priv->wstats.qual.qual;
-		bHwError = (((*(priv->rxringtail)) & (0x00000fff)) == 4080) |
-			   (((*(priv->rxringtail)) & (0x04000000)) != 0) |
-			   (((*(priv->rxringtail)) & (0x08000000)) != 0) |
-			   (((~(*(priv->rxringtail))) & (0x10000000)) != 0) |
-			   (((~(*(priv->rxringtail))) & (0x20000000)) != 0);
-		bCRC = ((*(priv->rxringtail)) & (0x00002000)) >> 13;
-		bICV = ((*(priv->rxringtail)) & (0x00001000)) >> 12;
-		hdr = (struct ieee80211_hdr_4addr *)priv->rxbuffer->buf;
-		    fc = le16_to_cpu(hdr->frame_ctl);
-		type = WLAN_FC_GET_TYPE(fc);
-
-		if (IEEE80211_FTYPE_CTL != type &&
-		    !bHwError && !bCRC && !bICV &&
-		    eqMacAddr(priv->ieee80211->current_network.bssid,
-			fc & IEEE80211_FCTL_TODS ? hdr->addr1 :
-			fc & IEEE80211_FCTL_FROMDS ? hdr->addr2 :
-			hdr->addr3)) {
-
-			/* Perform signal smoothing for dynamic
-			 * mechanism on demand. This is different
-			 * with PerformSignalSmoothing8185 in smoothing
-			 * fomula. No dramatic adjustion is apply
-			 * because dynamic mechanism need some degree
-			 * of correctness. */
-			PerformUndecoratedSignalSmoothing8185(priv, bCckRate);
-
-			/* For good-looking singal strength. */
-			SignalStrengthIndex = NetgearSignalStrengthTranslate(
-				priv->LastSignalStrengthInPercent,
-				priv->SignalStrength);
-
-			priv->LastSignalStrengthInPercent = SignalStrengthIndex;
-			priv->Stats_SignalStrength =
-				TranslateToDbm8185((u8)SignalStrengthIndex);
-
-			/*
-			 * We need more correct power of received packets and
-			 * the "SignalStrength" of RxStats is beautified, so we
-			 * record the correct power here.
-			 */
-
-			priv->Stats_SignalQuality = (long)(
-				priv->Stats_SignalQuality * 5 +
-				(long)priv->SignalQuality + 5) / 6;
-
-			priv->Stats_RecvSignalPower = (long)(
-				priv->Stats_RecvSignalPower * 5 +
-				priv->RecvSignalPower - 1) / 6;
-
-			/*
-			 * Figure out which antenna received the last packet.
-			 * 0: aux, 1: main
-			 */
-			priv->LastRxPktAntenna = Antenna ? 1 : 0;
-			SwAntennaDiversityRxOk8185(dev, priv->SignalStrength);
-		}
-
-		if (first) {
-			if (!priv->rx_skb_complete) {
-				/* seems that HW sometimes fails to receive and
-				 * doesn't provide the last descriptor.
-				 */
-				dev_kfree_skb_any(priv->rx_skb);
-				priv->stats.rxnolast++;
-			}
-			priv->rx_skb = dev_alloc_skb(len+2);
-			if (!priv->rx_skb)
-				goto drop;
-
-			priv->rx_skb_complete = 0;
-			priv->rx_skb->dev = dev;
-		} else {
-			/* if we are here we should have already RXed the first
-			 * frame.
-			 * If we get here and the skb is not allocated then
-			 * we have just throw out garbage (skb not allocated)
-			 * and we are still rxing garbage....
-			 */
-			if (!priv->rx_skb_complete) {
-
-				tmp_skb = dev_alloc_skb(
-					priv->rx_skb->len + len + 2);
-
-				if (!tmp_skb)
-					goto drop;
-
-				tmp_skb->dev = dev;
-
-				memcpy(skb_put(tmp_skb, priv->rx_skb->len),
-					priv->rx_skb->data,
-					priv->rx_skb->len);
-
-				dev_kfree_skb_any(priv->rx_skb);
-
-				priv->rx_skb = tmp_skb;
-			}
-		}
-
-		if (!priv->rx_skb_complete) {
-			memcpy(skb_put(priv->rx_skb, len), ((unsigned char *)
-				priv->rxbuffer->buf) + (padding ? 2 : 0), len);
-		}
-
-		if (last && !priv->rx_skb_complete) {
-			if (priv->rx_skb->len > 4)
-				skb_trim(priv->rx_skb, priv->rx_skb->len-4);
-			if (!ieee80211_rtl_rx(priv->ieee80211,
-					 priv->rx_skb, &stats))
-				dev_kfree_skb_any(priv->rx_skb);
-			priv->rx_skb_complete = 1;
-		}
-
-		pci_dma_sync_single_for_device(priv->pdev,
-				    priv->rxbuffer->dma,
-				    priv->rxbuffersize * sizeof(u8),
-				    PCI_DMA_FROMDEVICE);
-
-drop: /* this is used when we have not enough mem */
-		/* restore the descriptor */
-		*(priv->rxringtail+2) = priv->rxbuffer->dma;
-		*(priv->rxringtail) = *(priv->rxringtail) & ~0xfff;
-		*(priv->rxringtail) =
-			*(priv->rxringtail) | priv->rxbuffersize;
-
-		*(priv->rxringtail) =
-			*(priv->rxringtail) | (1<<31);
-
-		priv->rxringtail += rx_desc_size;
-		if (priv->rxringtail >=
-		   (priv->rxring)+(priv->rxringcount)*rx_desc_size)
-			priv->rxringtail = priv->rxring;
-
-		priv->rxbuffer = (priv->rxbuffer->next);
-	}
-}
-
-
-static void rtl8180_dma_kick(struct net_device *dev, int priority)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	write_nic_byte(dev, TX_DMA_POLLING,
-			(1 << (priority + 1)) | priv->dma_poll_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-	force_pci_posting(dev);
-}
-
-static void rtl8180_data_hard_stop(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	priv->dma_poll_stop_mask |= TPPOLLSTOP_AC_VIQ;
-	write_nic_byte(dev, TPPollStop, priv->dma_poll_stop_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-static void rtl8180_data_hard_resume(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	priv->dma_poll_stop_mask &= ~(TPPOLLSTOP_AC_VIQ);
-	write_nic_byte(dev, TPPollStop, priv->dma_poll_stop_mask);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-/*
- * This function TX data frames when the ieee80211 stack requires this.
- * It checks also if we need to stop the ieee tx queue, eventually do it
- */
-static void rtl8180_hard_data_xmit(struct sk_buff *skb, struct net_device *dev,
-				   int rate)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	int mode;
-	struct ieee80211_hdr_3addr *h = (struct ieee80211_hdr_3addr *)skb->data;
-	bool morefrag = le16_to_cpu(h->frame_control) & IEEE80211_FCTL_MOREFRAGS;
-	unsigned long flags;
-	int priority;
-
-	mode = priv->ieee80211->iw_mode;
-
-	rate = ieeerate2rtlrate(rate);
-	/*
-	 * This function doesn't require lock because we make sure it's called
-	 * with the tx_lock already acquired.
-	 * This come from the kernel's hard_xmit callback (through the ieee
-	 * stack, or from the try_wake_queue (again through the ieee stack.
-	 */
-	priority = AC2Q(skb->priority);
-	spin_lock_irqsave(&priv->tx_lock, flags);
-
-	if (priv->ieee80211->bHwRadioOff) {
-		spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-		return;
-	}
-
-	if (!check_nic_enought_desc(dev, priority)) {
-		DMESGW("Error: no descriptor left by previous TX (avail %d) ",
-			get_curr_tx_free_desc(dev, priority));
-		ieee80211_rtl_stop_queue(priv->ieee80211);
-	}
-	rtl8180_tx(dev, skb->data, skb->len, priority, morefrag, 0, rate);
-	if (!check_nic_enought_desc(dev, priority))
-		ieee80211_rtl_stop_queue(priv->ieee80211);
-
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-}
-
-/*
- * This is a rough attempt to TX a frame
- * This is called by the ieee 80211 stack to TX management frames.
- * If the ring is full packets are dropped (for data frame the queue
- * is stopped before this can happen). For this reason it is better
- * if the descriptors are larger than the largest management frame
- * we intend to TX: i'm unsure what the HW does if it will not find
- * the last fragment of a frame because it has been dropped...
- * Since queues for Management and Data frames are different we
- * might use a different lock than tx_lock (for example mgmt_tx_lock)
- */
-/* these function may loop if invoked with 0 descriptors or 0 len buffer */
-static int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	unsigned long flags;
-	int priority;
-
-	priority = MANAGE_PRIORITY;
-
-	spin_lock_irqsave(&priv->tx_lock, flags);
-
-	if (priv->ieee80211->bHwRadioOff) {
-		spin_unlock_irqrestore(&priv->tx_lock, flags);
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
-
-	rtl8180_tx(dev, skb->data, skb->len, priority,
-		0, 0, ieeerate2rtlrate(priv->ieee80211->basic_rate));
-
-	priv->ieee80211->stats.tx_bytes += skb->len;
-	priv->ieee80211->stats.tx_packets++;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-	dev_kfree_skb_any(skb);
-	return NETDEV_TX_OK;
-}
-
-static void rtl8180_prepare_beacon(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct sk_buff *skb;
-
-	u16 word  = read_nic_word(dev, BcnItv);
-	word &= ~BcnItv_BcnItv; /* clear Bcn_Itv */
-
-	/* word |= 0x64; */
-	word |= cpu_to_le16(priv->ieee80211->current_network.beacon_interval);
-
-	write_nic_word(dev, BcnItv, word);
-
-	skb = ieee80211_get_beacon(priv->ieee80211);
-	if (skb) {
-		rtl8180_tx(dev, skb->data, skb->len, BEACON_PRIORITY,
-			0, 0, ieeerate2rtlrate(priv->ieee80211->basic_rate));
-		dev_kfree_skb_any(skb);
-	}
-}
-
-/*
- * This function do the real dirty work: it enqueues a TX command descriptor in
- * the ring buffer, copyes the frame in a TX buffer and kicks the NIC to ensure
- * it does the DMA transfer.
- */
-short rtl8180_tx(struct net_device *dev, u8 *txbuf, int len, int priority,
-		 bool morefrag, short descfrag, int rate)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u32 *tail, *temp_tail;
-	u32 *begin;
-	u32 *buf;
-	int i;
-	int remain;
-	int buflen;
-	int count;
-	struct buffer *buflist;
-	struct ieee80211_hdr_3addr *frag_hdr =
-		(struct ieee80211_hdr_3addr *)txbuf;
-	u8 dest[ETH_ALEN];
-	u8 bUseShortPreamble = 0;
-	u8 bCTSEnable = 0;
-	u8 bRTSEnable = 0;
-	u16 Duration = 0;
-	u16 RtsDur = 0;
-	u16 ThisFrameTime = 0;
-	u16 TxDescDuration = 0;
-	bool ownbit_flag = false;
-
-	switch (priority) {
-	case MANAGE_PRIORITY:
-		tail = priv->txmapringtail;
-		begin = priv->txmapring;
-		buflist = priv->txmapbufstail;
-		count = priv->txringcount;
-		break;
-	case BK_PRIORITY:
-		tail = priv->txbkpringtail;
-		begin = priv->txbkpring;
-		buflist = priv->txbkpbufstail;
-		count = priv->txringcount;
-		break;
-	case BE_PRIORITY:
-		tail = priv->txbepringtail;
-		begin = priv->txbepring;
-		buflist = priv->txbepbufstail;
-		count = priv->txringcount;
-		break;
-	case VI_PRIORITY:
-		tail = priv->txvipringtail;
-		begin = priv->txvipring;
-		buflist = priv->txvipbufstail;
-		count = priv->txringcount;
-		break;
-	case VO_PRIORITY:
-		tail = priv->txvopringtail;
-		begin = priv->txvopring;
-		buflist = priv->txvopbufstail;
-		count = priv->txringcount;
-		break;
-	case HI_PRIORITY:
-		tail = priv->txhpringtail;
-		begin = priv->txhpring;
-		buflist = priv->txhpbufstail;
-		count = priv->txringcount;
-		break;
-	case BEACON_PRIORITY:
-		tail = priv->txbeaconringtail;
-		begin = priv->txbeaconring;
-		buflist = priv->txbeaconbufstail;
-		count = priv->txbeaconcount;
-		break;
-	default:
-		return -1;
-		break;
-	}
-
-	memcpy(&dest, frag_hdr->addr1, ETH_ALEN);
-	if (is_multicast_ether_addr(dest)) {
-		Duration = 0;
-		RtsDur = 0;
-		bRTSEnable = 0;
-		bCTSEnable = 0;
-
-		ThisFrameTime = ComputeTxTime(len + sCrcLng,
-			rtl8180_rate2rate(rate), 0, bUseShortPreamble);
-		TxDescDuration = ThisFrameTime;
-	} else { /* Unicast packet */
-		u16 AckTime;
-
-		/* for Keep alive */
-		priv->NumTxUnicast++;
-
-		/* Figure out ACK rate according to BSS basic rate
-		 * and Tx rate.
-		 * AckCTSLng = 14 use 1M bps send
-		 */
-		AckTime = ComputeTxTime(14, 10, 0, 0);
-
-		if (((len + sCrcLng) > priv->rts) && priv->rts) { /* RTS/CTS. */
-			u16 RtsTime, CtsTime;
-			bRTSEnable = 1;
-			bCTSEnable = 0;
-
-			/* Rate and time required for RTS. */
-			RtsTime = ComputeTxTime(sAckCtsLng / 8,
-				priv->ieee80211->basic_rate, 0, 0);
-
-			/* Rate and time required for CTS.
-			 * AckCTSLng = 14 use 1M bps send
-			 */
-			CtsTime = ComputeTxTime(14, 10, 0, 0);
-
-			/* Figure out time required to transmit this frame. */
-			ThisFrameTime = ComputeTxTime(len + sCrcLng,
-				rtl8180_rate2rate(rate), 0,
-				bUseShortPreamble);
-
-			/* RTS-CTS-ThisFrame-ACK. */
-			RtsDur = CtsTime + ThisFrameTime +
-				AckTime + 3 * aSifsTime;
-
-			TxDescDuration = RtsTime + RtsDur;
-		} else { /* Normal case. */
-			bCTSEnable = 0;
-			bRTSEnable = 0;
-			RtsDur = 0;
-
-			ThisFrameTime = ComputeTxTime(len + sCrcLng,
-				rtl8180_rate2rate(rate), 0, bUseShortPreamble);
-			TxDescDuration = ThisFrameTime + aSifsTime + AckTime;
-		}
-
-		if (!(le16_to_cpu(frag_hdr->frame_control) & IEEE80211_FCTL_MOREFRAGS)) {
-			/* ThisFrame-ACK. */
-			Duration = aSifsTime + AckTime;
-		} else { /* One or more fragments remained. */
-			u16 NextFragTime;
-
-			/* pretend following packet length = current packet */
-			NextFragTime = ComputeTxTime(len + sCrcLng,
-				rtl8180_rate2rate(rate), 0, bUseShortPreamble);
-
-			/* ThisFrag-ACk-NextFrag-ACK. */
-			Duration = NextFragTime + 3 * aSifsTime + 2 * AckTime;
-		}
-
-	} /* End of Unicast packet */
-
-	frag_hdr->duration_id = Duration;
-
-	buflen = priv->txbuffsize;
-	remain = len;
-	temp_tail = tail;
-
-	while (remain != 0) {
-		mb();
-		if (!buflist) {
-			DMESGE("TX buffer error, cannot TX frames. pri %d.",
-				priority);
-			return -1;
-		}
-		buf = buflist->buf;
-
-		if ((*tail & (1 << 31)) && (priority != BEACON_PRIORITY)) {
-			DMESGW("No more TX desc, returning %x of %x",
-			       remain, len);
-			priv->stats.txrdu++;
-			return remain;
-		}
-
-		*tail = 0; /* zeroes header */
-		*(tail+1) = 0;
-		*(tail+3) = 0;
-		*(tail+5) = 0;
-		*(tail+6) = 0;
-		*(tail+7) = 0;
-
-		/* FIXME: should be triggered by HW encryption parameters.*/
-		*tail |= (1<<15); /* no encrypt */
-
-		if (remain == len && !descfrag) {
-			ownbit_flag = false;
-			*tail = *tail | (1 << 29); /* first segment of packet */
-			*tail = *tail | (len);
-		} else {
-			ownbit_flag = true;
-		}
-
-		for (i = 0; i < buflen && remain > 0; i++, remain--) {
-			/* copy data into descriptor pointed DMAble buffer */
-			((u8 *)buf)[i] = txbuf[i];
-
-			if (remain == 4 && i+4 >= buflen)
-				break;
-			/* ensure the last desc has at least 4 bytes payload */
-		}
-		txbuf = txbuf + i;
-		*(tail+3) = *(tail+3) & ~0xfff;
-		*(tail+3) = *(tail+3) | i; /* buffer length */
-
-		if (bCTSEnable)
-			*tail |= (1<<18);
-
-		if (bRTSEnable) { /* rts enable */
-			/* RTS RATE */
-			*tail |= (ieeerate2rtlrate(
-				priv->ieee80211->basic_rate) << 19);
-
-			*tail |= (1<<23); /* rts enable */
-			*(tail+1) |= (RtsDur&0xffff); /* RTS Duration */
-		}
-		*(tail+3) |= ((TxDescDuration&0xffff)<<16); /* DURATION */
-
-		*(tail + 5) |= (11 << 8); /* retry lim; */
-
-		*tail = *tail | ((rate&0xf) << 24);
-
-		if (morefrag)
-			*tail = (*tail) | (1<<17); /* more fragment */
-		if (!remain)
-			*tail = (*tail) | (1<<28); /* last segment of frame */
-
-		*(tail+5) = *(tail+5)|(2<<27);
-		*(tail+7) = *(tail+7)|(1<<4);
-
-		wmb();
-		if (ownbit_flag)
-			/* descriptor ready to be txed */
-			*tail |= (1 << 31);
-
-		if ((tail - begin)/8 == count-1)
-			tail = begin;
-		else
-			tail = tail+8;
-
-		buflist = buflist->next;
-
-		mb();
-
-		switch (priority) {
-		case MANAGE_PRIORITY:
-			priv->txmapringtail = tail;
-			priv->txmapbufstail = buflist;
-			break;
-		case BK_PRIORITY:
-			priv->txbkpringtail = tail;
-			priv->txbkpbufstail = buflist;
-			break;
-		case BE_PRIORITY:
-			priv->txbepringtail = tail;
-			priv->txbepbufstail = buflist;
-			break;
-		case VI_PRIORITY:
-			priv->txvipringtail = tail;
-			priv->txvipbufstail = buflist;
-			break;
-		case VO_PRIORITY:
-			priv->txvopringtail = tail;
-			priv->txvopbufstail = buflist;
-			break;
-		case HI_PRIORITY:
-			priv->txhpringtail = tail;
-			priv->txhpbufstail = buflist;
-			break;
-		case BEACON_PRIORITY:
-			/*
-			 * The HW seems to be happy with the 1st
-			 * descriptor filled and the 2nd empty...
-			 * So always update descriptor 1 and never
-			 * touch 2nd
-			 */
-			break;
-		}
-	}
-	*temp_tail = *temp_tail | (1<<31); /* descriptor ready to be txed */
-	rtl8180_dma_kick(dev, priority);
-
-	return 0;
-}
-
-void rtl8180_irq_rx_tasklet(struct r8180_priv *priv);
-
-static void rtl8180_link_change(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16 beacon_interval;
-	struct ieee80211_network *net = &priv->ieee80211->current_network;
-
-	rtl8180_update_msr(dev);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-
-	write_nic_dword(dev, BSSID, ((u32 *)net->bssid)[0]);
-	write_nic_word(dev, BSSID+4, ((u16 *)net->bssid)[2]);
-
-	beacon_interval  = read_nic_word(dev, BEACON_INTERVAL);
-	beacon_interval &= ~BEACON_INTERVAL_MASK;
-	beacon_interval |= net->beacon_interval;
-	write_nic_word(dev, BEACON_INTERVAL, beacon_interval);
-
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-	rtl8180_set_chan(dev, priv->chan);
-}
-
-static void rtl8180_rq_tx_ack(struct net_device *dev)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	write_nic_byte(dev, CONFIG4,
-		read_nic_byte(dev, CONFIG4) | CONFIG4_PWRMGT);
-	priv->ack_tx_to_ieee = 1;
-}
-
-static short rtl8180_is_tx_queue_empty(struct net_device *dev)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u32 *d;
-
-	for (d = priv->txmapring;
-		d < priv->txmapring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txbkpring;
-		d < priv->txbkpring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txbepring;
-		d < priv->txbepring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txvipring;
-		d < priv->txvipring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txvopring;
-		d < priv->txvopring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-
-	for (d = priv->txhpring;
-		d < priv->txhpring + priv->txringcount; d += 8)
-			if (*d & (1<<31))
-				return 0;
-	return 1;
-}
-
-static void rtl8180_hw_wakeup(struct net_device *dev)
-{
-	unsigned long flags;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	spin_lock_irqsave(&priv->ps_lock, flags);
-	write_nic_byte(dev, CONFIG4,
-		read_nic_byte(dev, CONFIG4) & ~CONFIG4_PWRMGT);
-	if (priv->rf_wakeup)
-		priv->rf_wakeup(dev);
-	spin_unlock_irqrestore(&priv->ps_lock, flags);
-}
-
-static void rtl8180_hw_sleep_down(struct net_device *dev)
-{
-	unsigned long flags;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	spin_lock_irqsave(&priv->ps_lock, flags);
-	if (priv->rf_sleep)
-		priv->rf_sleep(dev);
-	spin_unlock_irqrestore(&priv->ps_lock, flags);
-}
-
-static void rtl8180_hw_sleep(struct net_device *dev, u32 th, u32 tl)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u32 rb = jiffies;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->ps_lock, flags);
-
-	/*
-	 * Writing HW register with 0 equals to disable
-	 * the timer, that is not really what we want
-	 */
-	tl -= MSECS(4+16+7);
-
-	/*
-	 * If the interval in which we are requested to sleep is too
-	 * short then give up and remain awake
-	 */
-	if (((tl >= rb) && (tl-rb) <= MSECS(MIN_SLEEP_TIME))
-		|| ((rb > tl) && (rb-tl) < MSECS(MIN_SLEEP_TIME))) {
-		spin_unlock_irqrestore(&priv->ps_lock, flags);
-		netdev_warn(dev, "too short to sleep\n");
-		return;
-	}
-
-	{
-		u32 tmp = (tl > rb) ? (tl-rb) : (rb-tl);
-
-		priv->DozePeriodInPast2Sec += jiffies_to_msecs(tmp);
-		/* as tl may be less than rb */
-		queue_delayed_work(priv->ieee80211->wq,
-			&priv->ieee80211->hw_wakeup_wq, tmp);
-	}
-	/*
-	 * If we suspect the TimerInt is gone beyond tl
-	 * while setting it, then give up
-	 */
-
-	if (((tl > rb) && ((tl-rb) > MSECS(MAX_SLEEP_TIME))) ||
-		((tl < rb) && ((rb-tl) > MSECS(MAX_SLEEP_TIME)))) {
-		spin_unlock_irqrestore(&priv->ps_lock, flags);
-		return;
-	}
-
-	queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->hw_sleep_wq);
-	spin_unlock_irqrestore(&priv->ps_lock, flags);
-}
-
-static void rtl8180_wmm_single_param_update(struct net_device *dev,
-	u8 mode, AC_CODING eACI, PAC_PARAM param)
-{
-	u8 u1bAIFS;
-	u32 u4bAcParam;
-
-	/* Retrieve parameters to update. */
-	/* Mode G/A: slotTimeTimer = 9; Mode B: 20 */
-	u1bAIFS = param->f.AciAifsn.f.AIFSN * ((mode & IEEE_G) == IEEE_G ?
-		9 : 20) + aSifsTime;
-	u4bAcParam = (((u32)param->f.TXOPLimit << AC_PARAM_TXOP_LIMIT_OFFSET) |
-		((u32)param->f.Ecw.f.ECWmax << AC_PARAM_ECW_MAX_OFFSET) |
-		((u32)param->f.Ecw.f.ECWmin << AC_PARAM_ECW_MIN_OFFSET) |
-		((u32)u1bAIFS << AC_PARAM_AIFS_OFFSET));
-
-	switch (eACI) {
-	case AC1_BK:
-		write_nic_dword(dev, AC_BK_PARAM, u4bAcParam);
-		return;
-	case AC0_BE:
-		write_nic_dword(dev, AC_BE_PARAM, u4bAcParam);
-		return;
-	case AC2_VI:
-		write_nic_dword(dev, AC_VI_PARAM, u4bAcParam);
-		return;
-	case AC3_VO:
-		write_nic_dword(dev, AC_VO_PARAM, u4bAcParam);
-		return;
-	default:
-		pr_warn("SetHwReg8185(): invalid ACI: %d!\n", eACI);
-		return;
-	}
-}
-
-static void rtl8180_wmm_param_update(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(work,
-		struct ieee80211_device, wmm_param_update_wq);
-	struct net_device *dev = ieee->dev;
-	u8 *ac_param = (u8 *)(ieee->current_network.wmm_param);
-	u8 mode = ieee->current_network.mode;
-	AC_CODING eACI;
-	AC_PARAM AcParam;
-
-	if (!ieee->current_network.QoS_Enable) {
-		/* legacy ac_xx_param update */
-		AcParam.longData = 0;
-		AcParam.f.AciAifsn.f.AIFSN = 2; /* Follow 802.11 DIFS. */
-		AcParam.f.AciAifsn.f.ACM = 0;
-		AcParam.f.Ecw.f.ECWmin = 3; /* Follow 802.11 CWmin. */
-		AcParam.f.Ecw.f.ECWmax = 7; /* Follow 802.11 CWmax. */
-		AcParam.f.TXOPLimit = 0;
-
-		for (eACI = 0; eACI < AC_MAX; eACI++) {
-			AcParam.f.AciAifsn.f.ACI = (u8)eACI;
-
-			rtl8180_wmm_single_param_update(dev, mode, eACI,
-				(PAC_PARAM)&AcParam);
-		}
-		return;
-	}
-
-	for (eACI = 0; eACI < AC_MAX; eACI++) {
-		rtl8180_wmm_single_param_update(dev, mode,
-			((PAC_PARAM)ac_param)->f.AciAifsn.f.ACI,
-			(PAC_PARAM)ac_param);
-
-		ac_param += sizeof(AC_PARAM);
-	}
-}
-
-void rtl8180_restart_wq(struct work_struct *work);
-void rtl8180_watch_dog_wq(struct work_struct *work);
-void rtl8180_hw_wakeup_wq(struct work_struct *work);
-void rtl8180_hw_sleep_wq(struct work_struct *work);
-void rtl8180_sw_antenna_wq(struct work_struct *work);
-void rtl8180_watch_dog(struct net_device *dev);
-
-static void watch_dog_adaptive(unsigned long data)
-{
-	struct r8180_priv *priv = ieee80211_priv((struct net_device *)data);
-
-	if (!priv->up) {
-		DMESG("<----watch_dog_adaptive():driver is not up!\n");
-		return;
-	}
-
-	/* Tx High Power Mechanism. */
-	if (CheckHighPower((struct net_device *)data))
-		queue_work(priv->ieee80211->wq,
-			(void *)&priv->ieee80211->tx_pw_wq);
-
-	/* Tx Power Tracking on 87SE. */
-	if (CheckTxPwrTracking((struct net_device *)data))
-		TxPwrTracking87SE((struct net_device *)data);
-
-	/* Perform DIG immediately. */
-	if (CheckDig((struct net_device *)data))
-		queue_work(priv->ieee80211->wq,
-			(void *)&priv->ieee80211->hw_dig_wq);
-
-	rtl8180_watch_dog((struct net_device *)data);
-
-	queue_work(priv->ieee80211->wq,
-		(void *)&priv->ieee80211->GPIOChangeRFWorkItem);
-
-	priv->watch_dog_timer.expires = jiffies +
-		MSECS(IEEE80211_WATCH_DOG_TIME);
-
-	add_timer(&priv->watch_dog_timer);
-}
-
-static struct rtl8187se_channel_list channel_plan_list[] = {
-	/* FCC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40,
-		44, 48, 52, 56, 60, 64}, 19},
-
-	/* IC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 11},
-
-	/* ETSI */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40,
-		44, 48, 52, 56, 60, 64}, 21},
-
-	/* Spain. Change to ETSI. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40,
-		44, 48, 52, 56, 60, 64}, 21},
-
-	/* France. Change to ETSI. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40,
-		44, 48, 52, 56, 60, 64}, 21},
-
-	/* MKK */
-	{{14, 36, 40, 44, 48, 52, 56, 60, 64}, 9},
-
-	/* MKK1 */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36,
-		40, 44, 48, 52, 56, 60, 64}, 22},
-
-	/* Israel. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40,
-		44, 48, 52, 56, 60, 64}, 21},
-
-	/* For 11a , TELEC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 34, 38, 42, 46}, 17},
-
-	/* For Global Domain. 1-11 active, 12-14 passive. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, 14},
-
-	/* world wide 13: ch1~ch11 active, ch12~13 passive */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, 13}
-};
-
-static void rtl8180_set_channel_map(u8 channel_plan,
-				    struct ieee80211_device *ieee)
-{
-	int i;
-
-	ieee->MinPassiveChnlNum = MAX_CHANNEL_NUMBER+1;
-	ieee->IbssStartChnl = 0;
-
-	switch (channel_plan) {
-	case COUNTRY_CODE_FCC:
-	case COUNTRY_CODE_IC:
-	case COUNTRY_CODE_ETSI:
-	case COUNTRY_CODE_SPAIN:
-	case COUNTRY_CODE_FRANCE:
-	case COUNTRY_CODE_MKK:
-	case COUNTRY_CODE_MKK1:
-	case COUNTRY_CODE_ISRAEL:
-	case COUNTRY_CODE_TELEC:
-		{
-			Dot11d_Init(ieee);
-			ieee->bGlobalDomain = false;
-			if (channel_plan_list[channel_plan].len != 0) {
-				/* Clear old channel map */
-				memset(GET_DOT11D_INFO(ieee)->channel_map, 0, sizeof(GET_DOT11D_INFO(ieee)->channel_map));
-				/* Set new channel map */
-				for (i = 0; i < channel_plan_list[channel_plan].len; i++) {
-					if (channel_plan_list[channel_plan].channel[i] <= 14)
-						GET_DOT11D_INFO(ieee)->channel_map[channel_plan_list[channel_plan].channel[i]] = 1;
-				}
-			}
-			break;
-		}
-	case COUNTRY_CODE_GLOBAL_DOMAIN:
-		{
-			GET_DOT11D_INFO(ieee)->bEnabled = false;
-			Dot11d_Reset(ieee);
-			ieee->bGlobalDomain = true;
-			break;
-		}
-	case COUNTRY_CODE_WORLD_WIDE_13_INDEX:
-		{
-			ieee->MinPassiveChnlNum = 12;
-			ieee->IbssStartChnl = 10;
-			break;
-		}
-	default:
-		{
-			Dot11d_Init(ieee);
-			ieee->bGlobalDomain = false;
-			memset(GET_DOT11D_INFO(ieee)->channel_map, 0, sizeof(GET_DOT11D_INFO(ieee)->channel_map));
-			for (i = 1; i <= 14; i++)
-				GET_DOT11D_INFO(ieee)->channel_map[i] = 1;
-			break;
-		}
-	}
-}
-
-void GPIOChangeRFWorkItemCallBack(struct work_struct *work);
-
-static void rtl8180_statistics_init(struct stats *pstats)
-{
-	memset(pstats, 0, sizeof(struct stats));
-}
-
-static void rtl8180_link_detect_init(struct link_detect_t *plink_detect)
-{
-	memset(plink_detect, 0, sizeof(struct link_detect_t));
-	plink_detect->slot_num = DEFAULT_SLOT_NUM;
-}
-
-static void rtl8187se_eeprom_register_read(struct eeprom_93cx6 *eeprom)
-{
-	struct net_device *dev = eeprom->data;
-	u8 reg = read_nic_byte(dev, EPROM_CMD);
-
-	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
-	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
-	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
-	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
-}
-
-static void rtl8187se_eeprom_register_write(struct eeprom_93cx6 *eeprom)
-{
-	struct net_device *dev = eeprom->data;
-	u8 reg = 2 << 6;
-
-	if (eeprom->reg_data_in)
-		reg |= RTL818X_EEPROM_CMD_WRITE;
-	if (eeprom->reg_data_out)
-		reg |= RTL818X_EEPROM_CMD_READ;
-	if (eeprom->reg_data_clock)
-		reg |= RTL818X_EEPROM_CMD_CK;
-	if (eeprom->reg_chip_select)
-		reg |= RTL818X_EEPROM_CMD_CS;
-
-	write_nic_byte(dev, EPROM_CMD, reg);
-	read_nic_byte(dev, EPROM_CMD);
-	udelay(10);
-}
-
-static short rtl8180_init(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16 word;
-	u16 usValue;
-	u16 tmpu16;
-	int i, j;
-	struct eeprom_93cx6 eeprom;
-	u16 eeprom_val;
-
-	eeprom.data = dev;
-	eeprom.register_read = rtl8187se_eeprom_register_read;
-	eeprom.register_write = rtl8187se_eeprom_register_write;
-	eeprom.width = PCI_EEPROM_WIDTH_93C46;
-
-	eeprom_93cx6_read(&eeprom, EEPROM_COUNTRY_CODE>>1, &eeprom_val);
-	priv->channel_plan = eeprom_val & 0xFF;
-	if (priv->channel_plan > COUNTRY_CODE_GLOBAL_DOMAIN) {
-		netdev_err(dev, "rtl8180_init: Invalid channel plan! Set to default.\n");
-		priv->channel_plan = 0;
-	}
-
-	DMESG("Channel plan is %d\n", priv->channel_plan);
-	rtl8180_set_channel_map(priv->channel_plan, priv->ieee80211);
-
-	/* FIXME: these constants are placed in a bad pleace. */
-	priv->txbuffsize = 2048;	/* 1024; */
-	priv->txringcount = 32;		/* 32; */
-	priv->rxbuffersize = 2048;	/* 1024; */
-	priv->rxringcount = 64;		/* 32; */
-	priv->txbeaconcount = 2;
-	priv->rx_skb_complete = 1;
-
-	priv->RFChangeInProgress = false;
-	priv->SetRFPowerStateInProgress = false;
-	priv->RFProgType = 0;
-
-	priv->irq_enabled = 0;
-
-	rtl8180_statistics_init(&priv->stats);
-	rtl8180_link_detect_init(&priv->link_detect);
-
-	priv->ack_tx_to_ieee = 0;
-	priv->ieee80211->current_network.beacon_interval =
-		DEFAULT_BEACONINTERVAL;
-	priv->ieee80211->iw_mode = IW_MODE_INFRA;
-	priv->ieee80211->softmac_features  = IEEE_SOFTMAC_SCAN |
-		IEEE_SOFTMAC_ASSOCIATE | IEEE_SOFTMAC_PROBERQ |
-		IEEE_SOFTMAC_PROBERS | IEEE_SOFTMAC_TX_QUEUE;
-	priv->ieee80211->active_scan = 1;
-	priv->ieee80211->rate = 110; /* 11 mbps */
-	priv->ieee80211->modulation = IEEE80211_CCK_MODULATION;
-	priv->ieee80211->host_encrypt = 1;
-	priv->ieee80211->host_decrypt = 1;
-	priv->ieee80211->sta_wake_up = rtl8180_hw_wakeup;
-	priv->ieee80211->ps_request_tx_ack = rtl8180_rq_tx_ack;
-	priv->ieee80211->enter_sleep_state = rtl8180_hw_sleep;
-	priv->ieee80211->ps_is_queue_empty = rtl8180_is_tx_queue_empty;
-
-	priv->hw_wep = hwwep;
-	priv->dev = dev;
-	priv->retry_rts = DEFAULT_RETRY_RTS;
-	priv->retry_data = DEFAULT_RETRY_DATA;
-	priv->RFChangeInProgress = false;
-	priv->SetRFPowerStateInProgress = false;
-	priv->RFProgType = 0;
-	priv->bInactivePs = true; /* false; */
-	priv->ieee80211->bInactivePs = priv->bInactivePs;
-	priv->bSwRfProcessing = false;
-	priv->eRFPowerState = RF_OFF;
-	priv->RfOffReason = 0;
-	priv->led_strategy = SW_LED_MODE0;
-	priv->TxPollingTimes = 0;
-	priv->bLeisurePs = true;
-	priv->dot11PowerSaveMode = ACTIVE;
-	priv->AdMinCheckPeriod = 5;
-	priv->AdMaxCheckPeriod = 10;
-	priv->AdMaxRxSsThreshold = 30;	/* 60->30 */
-	priv->AdRxSsThreshold = 20;	/* 50->20 */
-	priv->AdCheckPeriod = priv->AdMinCheckPeriod;
-	priv->AdTickCount = 0;
-	priv->AdRxSignalStrength = -1;
-	priv->RegSwAntennaDiversityMechanism = 0;
-	priv->RegDefaultAntenna = 0;
-	priv->SignalStrength = 0;
-	priv->AdRxOkCnt = 0;
-	priv->CurrAntennaIndex = 0;
-	priv->AdRxSsBeforeSwitched = 0;
-	init_timer(&priv->SwAntennaDiversityTimer);
-	priv->SwAntennaDiversityTimer.data = (unsigned long)dev;
-	priv->SwAntennaDiversityTimer.function =
-		(void *)SwAntennaDiversityTimerCallback;
-	priv->bDigMechanism = true;
-	priv->InitialGain = 6;
-	priv->bXtalCalibration = false;
-	priv->XtalCal_Xin = 0;
-	priv->XtalCal_Xout = 0;
-	priv->bTxPowerTrack = false;
-	priv->ThermalMeter = 0;
-	priv->FalseAlarmRegValue = 0;
-	priv->RegDigOfdmFaUpTh = 0xc; /* Upper threshold of OFDM false alarm,
-					which is used in DIG. */
-	priv->DIG_NumberFallbackVote = 0;
-	priv->DIG_NumberUpgradeVote = 0;
-	priv->LastSignalStrengthInPercent = 0;
-	priv->Stats_SignalStrength = 0;
-	priv->LastRxPktAntenna = 0;
-	priv->SignalQuality = 0; /* in 0-100 index. */
-	priv->Stats_SignalQuality = 0;
-	priv->RecvSignalPower = 0; /* in dBm. */
-	priv->Stats_RecvSignalPower = 0;
-	priv->AdMainAntennaRxOkCnt = 0;
-	priv->AdAuxAntennaRxOkCnt = 0;
-	priv->bHWAdSwitched = false;
-	priv->bRegHighPowerMechanism = true;
-	priv->RegHiPwrUpperTh = 77;
-	priv->RegHiPwrLowerTh = 75;
-	priv->RegRSSIHiPwrUpperTh = 70;
-	priv->RegRSSIHiPwrLowerTh = 20;
-	priv->bCurCCKPkt = false;
-	priv->UndecoratedSmoothedSS = -1;
-	priv->bToUpdateTxPwr = false;
-	priv->CurCCKRSSI = 0;
-	priv->RxPower = 0;
-	priv->RSSI = 0;
-	priv->NumTxOkTotal = 0;
-	priv->NumTxUnicast = 0;
-	priv->keepAliveLevel = DEFAULT_KEEP_ALIVE_LEVEL;
-	priv->CurrRetryCnt = 0;
-	priv->LastRetryCnt = 0;
-	priv->LastTxokCnt = 0;
-	priv->LastRxokCnt = 0;
-	priv->LastRetryRate = 0;
-	priv->bTryuping = 0;
-	priv->CurrTxRate = 0;
-	priv->CurrRetryRate = 0;
-	priv->TryupingCount = 0;
-	priv->TryupingCountNoData = 0;
-	priv->TryDownCountLowData = 0;
-	priv->LastTxOKBytes = 0;
-	priv->LastFailTxRate = 0;
-	priv->LastFailTxRateSS = 0;
-	priv->FailTxRateCount = 0;
-	priv->LastTxThroughput = 0;
-	priv->NumTxOkBytesTotal = 0;
-	priv->ForcedDataRate = 0;
-	priv->RegBModeGainStage = 1;
-
-	priv->promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
-	spin_lock_init(&priv->irq_th_lock);
-	spin_lock_init(&priv->tx_lock);
-	spin_lock_init(&priv->ps_lock);
-	spin_lock_init(&priv->rf_ps_lock);
-	sema_init(&priv->wx_sem, 1);
-	INIT_WORK(&priv->reset_wq, (void *)rtl8180_restart_wq);
-	INIT_DELAYED_WORK(&priv->ieee80211->hw_wakeup_wq,
-			  (void *)rtl8180_hw_wakeup_wq);
-	INIT_DELAYED_WORK(&priv->ieee80211->hw_sleep_wq,
-			  (void *)rtl8180_hw_sleep_wq);
-	INIT_WORK(&priv->ieee80211->wmm_param_update_wq,
-		  (void *)rtl8180_wmm_param_update);
-	INIT_DELAYED_WORK(&priv->ieee80211->rate_adapter_wq,
-			  (void *)rtl8180_rate_adapter);
-	INIT_DELAYED_WORK(&priv->ieee80211->hw_dig_wq,
-			 (void *)rtl8180_hw_dig_wq);
-	INIT_DELAYED_WORK(&priv->ieee80211->tx_pw_wq,
-			 (void *)rtl8180_tx_pw_wq);
-	INIT_DELAYED_WORK(&priv->ieee80211->GPIOChangeRFWorkItem,
-			 (void *) GPIOChangeRFWorkItemCallBack);
-	tasklet_init(&priv->irq_rx_tasklet,
-		     (void(*)(unsigned long)) rtl8180_irq_rx_tasklet,
-		     (unsigned long)priv);
-
-	init_timer(&priv->watch_dog_timer);
-	priv->watch_dog_timer.data = (unsigned long)dev;
-	priv->watch_dog_timer.function = watch_dog_adaptive;
-
-	init_timer(&priv->rateadapter_timer);
-	priv->rateadapter_timer.data = (unsigned long)dev;
-	priv->rateadapter_timer.function = timer_rate_adaptive;
-	priv->RateAdaptivePeriod = RATE_ADAPTIVE_TIMER_PERIOD;
-	priv->bEnhanceTxPwr = false;
-
-	priv->ieee80211->softmac_hard_start_xmit = rtl8180_hard_start_xmit;
-	priv->ieee80211->set_chan = rtl8180_set_chan;
-	priv->ieee80211->link_change = rtl8180_link_change;
-	priv->ieee80211->softmac_data_hard_start_xmit = rtl8180_hard_data_xmit;
-	priv->ieee80211->data_hard_stop = rtl8180_data_hard_stop;
-	priv->ieee80211->data_hard_resume = rtl8180_data_hard_resume;
-
-	priv->ieee80211->init_wmmparam_flag = 0;
-
-	priv->ieee80211->start_send_beacons = rtl8180_start_tx_beacon;
-	priv->ieee80211->stop_send_beacons = rtl8180_beacon_tx_disable;
-	priv->ieee80211->fts = DEFAULT_FRAG_THRESHOLD;
-
-	priv->ShortRetryLimit = 7;
-	priv->LongRetryLimit = 7;
-	priv->EarlyRxThreshold = 7;
-
-	priv->TransmitConfig =	(1<<TCR_DurProcMode_OFFSET) |
-				(7<<TCR_MXDMA_OFFSET) |
-				(priv->ShortRetryLimit<<TCR_SRL_OFFSET) |
-				(priv->LongRetryLimit<<TCR_LRL_OFFSET);
-
-	priv->ReceiveConfig =	RCR_AMF | RCR_ADF | RCR_ACF |
-				RCR_AB | RCR_AM | RCR_APM |
-				(7<<RCR_MXDMA_OFFSET) |
-				(priv->EarlyRxThreshold<<RCR_FIFO_OFFSET) |
-				(priv->EarlyRxThreshold == 7 ?
-					 RCR_ONLYERLPKT : 0);
-
-	priv->IntrMask		= IMR_TMGDOK | IMR_TBDER |
-				  IMR_THPDER | IMR_THPDOK |
-				  IMR_TVODER | IMR_TVODOK |
-				  IMR_TVIDER | IMR_TVIDOK |
-				  IMR_TBEDER | IMR_TBEDOK |
-				  IMR_TBKDER | IMR_TBKDOK |
-				  IMR_RDU |
-				  IMR_RER | IMR_ROK |
-				  IMR_RQoSOK;
-
-	priv->InitialGain = 6;
-
-	DMESG("MAC controller is a RTL8187SE b/g");
-
-	priv->ieee80211->modulation |= IEEE80211_OFDM_MODULATION;
-	priv->ieee80211->short_slot = 1;
-
-	eeprom_93cx6_read(&eeprom, EEPROM_SW_REVD_OFFSET, &usValue);
-	DMESG("usValue is %#hx\n", usValue);
-	/* 3Read AntennaDiversity */
-
-	/* SW Antenna Diversity. */
-	priv->EEPROMSwAntennaDiversity = (usValue & EEPROM_SW_AD_MASK) ==
-		EEPROM_SW_AD_ENABLE;
-
-	/* Default Antenna to use. */
-	priv->EEPROMDefaultAntenna1 = (usValue & EEPROM_DEF_ANT_MASK) ==
-		EEPROM_DEF_ANT_1;
-
-	if (priv->RegSwAntennaDiversityMechanism == 0) /* Auto */
-		/* 0: default from EEPROM. */
-		priv->bSwAntennaDiverity = priv->EEPROMSwAntennaDiversity;
-	else
-		/* 1:disable antenna diversity, 2: enable antenna diversity. */
-		priv->bSwAntennaDiverity =
-			priv->RegSwAntennaDiversityMechanism == 2;
-
-	if (priv->RegDefaultAntenna == 0)
-		/* 0: default from EEPROM. */
-		priv->bDefaultAntenna1 = priv->EEPROMDefaultAntenna1;
-	else
-		/* 1: main, 2: aux. */
-		priv->bDefaultAntenna1 = priv->RegDefaultAntenna == 2;
-
-	priv->plcp_preamble_mode = 2;
-	/* the eeprom type is stored in RCR register bit #6 */
-	if (RCR_9356SEL & read_nic_dword(dev, RCR))
-		priv->epromtype = EPROM_93c56;
-	else
-		priv->epromtype = EPROM_93c46;
-
-	eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)
-			       dev->dev_addr, 3);
-
-	for (i = 1, j = 0; i < 14; i += 2, j++) {
-		eeprom_93cx6_read(&eeprom, EPROM_TXPW_CH1_2 + j, &word);
-		priv->chtxpwr[i] = word & 0xff;
-		priv->chtxpwr[i+1] = (word & 0xff00)>>8;
-	}
-	for (i = 1, j = 0; i < 14; i += 2, j++) {
-		eeprom_93cx6_read(&eeprom, EPROM_TXPW_OFDM_CH1_2 + j, &word);
-		priv->chtxpwr_ofdm[i] = word & 0xff;
-		priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8;
-	}
-
-	/* 3Read crystal calibration and thermal meter indication on 87SE. */
-	eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16);
-
-	/* Crystal calibration for Xin and Xout resp. */
-	priv->XtalCal_Xout = tmpu16 & EEPROM_XTAL_CAL_XOUT_MASK;
-	priv->XtalCal_Xin = (tmpu16 & EEPROM_XTAL_CAL_XIN_MASK) >> 4;
-	if ((tmpu16 & EEPROM_XTAL_CAL_ENABLE) >> 12)
-		priv->bXtalCalibration = true;
-
-	/* Thermal meter reference indication. */
-	priv->ThermalMeter =  (u8)((tmpu16 & EEPROM_THERMAL_METER_MASK) >> 8);
-	if ((tmpu16 & EEPROM_THERMAL_METER_ENABLE) >> 13)
-		priv->bTxPowerTrack = true;
-
-	priv->rf_sleep = rtl8225z4_rf_sleep;
-	priv->rf_wakeup = rtl8225z4_rf_wakeup;
-	DMESGW("**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!");
-
-	priv->rf_close = rtl8225z2_rf_close;
-	priv->rf_init = rtl8225z2_rf_init;
-	priv->rf_set_chan = rtl8225z2_rf_set_chan;
-	priv->rf_set_sens = NULL;
-
-	if (0 != alloc_rx_desc_ring(dev, priv->rxbuffersize, priv->rxringcount))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				  TX_MANAGEPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				 TX_BKPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				 TX_BEPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				  TX_VIPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				  TX_VOPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txringcount,
-				  TX_HIGHPRIORITY_RING_ADDR))
-		return -ENOMEM;
-
-	if (0 != alloc_tx_desc_ring(dev, priv->txbuffsize, priv->txbeaconcount,
-				  TX_BEACON_RING_ADDR))
-		return -ENOMEM;
-
-	if (request_irq(dev->irq, rtl8180_interrupt,
-		IRQF_SHARED, dev->name, dev)) {
-		DMESGE("Error allocating IRQ %d", dev->irq);
-		return -1;
-	} else {
-		priv->irq = dev->irq;
-		DMESG("IRQ %d", dev->irq);
-	}
-
-	return 0;
-}
-
-void rtl8180_no_hw_wep(struct net_device *dev)
-{
-}
-
-void rtl8180_set_hw_wep(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 pgreg;
-	u8 security;
-	u32 key0_word4;
-
-	pgreg = read_nic_byte(dev, PGSELECT);
-	write_nic_byte(dev, PGSELECT, pgreg & ~(1<<PGSELECT_PG_SHIFT));
-
-	key0_word4 = read_nic_dword(dev, KEY0+4+4+4);
-	key0_word4 &= ~0xff;
-	key0_word4 |= priv->key0[3] & 0xff;
-	write_nic_dword(dev, KEY0, (priv->key0[0]));
-	write_nic_dword(dev, KEY0+4, (priv->key0[1]));
-	write_nic_dword(dev, KEY0+4+4, (priv->key0[2]));
-	write_nic_dword(dev, KEY0+4+4+4, (key0_word4));
-
-	security  = read_nic_byte(dev, SECURITY);
-	security |= (1<<SECURITY_WEP_TX_ENABLE_SHIFT);
-	security |= (1<<SECURITY_WEP_RX_ENABLE_SHIFT);
-	security &= ~SECURITY_ENCRYP_MASK;
-	security |= (SECURITY_ENCRYP_104<<SECURITY_ENCRYP_SHIFT);
-
-	write_nic_byte(dev, SECURITY, security);
-
-	DMESG("key %x %x %x %x", read_nic_dword(dev, KEY0+4+4+4),
-	      read_nic_dword(dev, KEY0+4+4), read_nic_dword(dev, KEY0+4),
-	      read_nic_dword(dev, KEY0));
-}
-
-
-void rtl8185_rf_pins_enable(struct net_device *dev)
-{
-	write_nic_word(dev, RFPinsEnable, 0x1fff); /* | tmp); */
-}
-
-void rtl8185_set_anaparam2(struct net_device *dev, u32 a)
-{
-	u8 conf3;
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-
-	conf3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, conf3 | (1<<CONFIG3_ANAPARAM_W_SHIFT));
-	write_nic_dword(dev, ANAPARAM2, a);
-
-	conf3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, conf3 & ~(1<<CONFIG3_ANAPARAM_W_SHIFT));
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-void rtl8180_set_anaparam(struct net_device *dev, u32 a)
-{
-	u8 conf3;
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-
-	conf3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, conf3 | (1<<CONFIG3_ANAPARAM_W_SHIFT));
-	write_nic_dword(dev, ANAPARAM, a);
-
-	conf3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, conf3 & ~(1<<CONFIG3_ANAPARAM_W_SHIFT));
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-}
-
-void rtl8185_tx_antenna(struct net_device *dev, u8 ant)
-{
-	write_nic_byte(dev, TX_ANTENNA, ant);
-	force_pci_posting(dev);
-	mdelay(1);
-}
-
-static void rtl8185_write_phy(struct net_device *dev, u8 adr, u32 data)
-{
-	u32 phyw;
-
-	adr |= 0x80;
-
-	phyw = ((data<<8) | adr);
-
-	/* Note: we must write 0xff7c after 0x7d-0x7f to write BB register. */
-	write_nic_byte(dev, 0x7f, ((phyw & 0xff000000) >> 24));
-	write_nic_byte(dev, 0x7e, ((phyw & 0x00ff0000) >> 16));
-	write_nic_byte(dev, 0x7d, ((phyw & 0x0000ff00) >> 8));
-	write_nic_byte(dev, 0x7c, ((phyw & 0x000000ff)));
-}
-
-inline void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data)
-{
-	data = data & 0xff;
-	rtl8185_write_phy(dev, adr, data);
-}
-
-void write_phy_cck(struct net_device *dev, u8 adr, u32 data)
-{
-	data = data & 0xff;
-	rtl8185_write_phy(dev, adr, data | 0x10000);
-}
-
-/*
- * This configures registers for beacon tx and enables it via
- * rtl8180_beacon_tx_enable(). rtl8180_beacon_tx_disable() might
- * be used to stop beacon transmission
- */
-void rtl8180_start_tx_beacon(struct net_device *dev)
-{
-	u16 word;
-
-	DMESG("Enabling beacon TX");
-	rtl8180_prepare_beacon(dev);
-	rtl8180_irq_disable(dev);
-	rtl8180_beacon_tx_enable(dev);
-
-	word = read_nic_word(dev, AtimWnd) & ~AtimWnd_AtimWnd;
-	write_nic_word(dev, AtimWnd, word); /* word |= */
-
-	word  = read_nic_word(dev, BintrItv);
-	word &= ~BintrItv_BintrItv;
-	word |= 1000; /* priv->ieee80211->current_network.beacon_interval *
-		       * ((priv->txbeaconcount > 1)?(priv->txbeaconcount-1):1);
-		       * FIXME: check if correct ^^ worked with 0x3e8;
-		       */
-	write_nic_word(dev, BintrItv, word);
-
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-	rtl8185b_irq_enable(dev);
-}
-
-static struct net_device_stats *rtl8180_stats(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	return &priv->ieee80211->stats;
-}
-
-/*
- * Change current and default preamble mode.
- */
-static bool MgntActSet_802_11_PowerSaveMode(struct r8180_priv *priv,
-				     enum rt_ps_mode rtPsMode)
-{
-	/* Currently, we do not change power save mode on IBSS mode. */
-	if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
-		return false;
-
-	priv->ieee80211->ps = rtPsMode;
-
-	return true;
-}
-
-static void LeisurePSEnter(struct r8180_priv *priv)
-{
-	if (priv->bLeisurePs)
-		if (priv->ieee80211->ps == IEEE80211_PS_DISABLED)
-			/* IEEE80211_PS_ENABLE */
-			MgntActSet_802_11_PowerSaveMode(priv,
-				IEEE80211_PS_MBCAST | IEEE80211_PS_UNICAST);
-}
-
-static void LeisurePSLeave(struct r8180_priv *priv)
-{
-	if (priv->bLeisurePs)
-		if (priv->ieee80211->ps != IEEE80211_PS_DISABLED)
-			MgntActSet_802_11_PowerSaveMode(
-				priv, IEEE80211_PS_DISABLED);
-}
-
-void rtl8180_hw_wakeup_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(
-		dwork, struct ieee80211_device, hw_wakeup_wq);
-	struct net_device *dev = ieee->dev;
-
-	rtl8180_hw_wakeup(dev);
-}
-
-void rtl8180_hw_sleep_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(
-		dwork, struct ieee80211_device, hw_sleep_wq);
-	struct net_device *dev = ieee->dev;
-
-	rtl8180_hw_sleep_down(dev);
-}
-
-static void MgntLinkKeepAlive(struct r8180_priv *priv)
-{
-	if (priv->keepAliveLevel == 0)
-		return;
-
-	if (priv->ieee80211->state == IEEE80211_LINKED) {
-		/*
-		 * Keep-Alive.
-		 */
-
-		if ((priv->keepAliveLevel == 2) ||
-			(priv->link_detect.last_num_tx_unicast ==
-				priv->NumTxUnicast &&
-			priv->link_detect.last_num_rx_unicast ==
-				priv->ieee80211->NumRxUnicast)
-			) {
-			priv->link_detect.idle_count++;
-
-			/*
-			 * Send a Keep-Alive packet packet to AP if we had
-			 * been idle for a while.
-			 */
-			if (priv->link_detect.idle_count >=
-				KEEP_ALIVE_INTERVAL /
-				CHECK_FOR_HANG_PERIOD - 1) {
-				priv->link_detect.idle_count = 0;
-				ieee80211_sta_ps_send_null_frame(
-					priv->ieee80211, false);
-			}
-		} else {
-			priv->link_detect.idle_count = 0;
-		}
-		priv->link_detect.last_num_tx_unicast = priv->NumTxUnicast;
-		priv->link_detect.last_num_rx_unicast =
-			priv->ieee80211->NumRxUnicast;
-	}
-}
-
-void rtl8180_watch_dog(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	bool bEnterPS = false;
-	bool bBusyTraffic = false;
-	u32 TotalRxNum = 0;
-	u16 SlotIndex = 0;
-	u16 i = 0;
-	if (priv->ieee80211->actscanning == false) {
-		if ((priv->ieee80211->iw_mode != IW_MODE_ADHOC) &&
-		    (priv->ieee80211->state == IEEE80211_NOLINK) &&
-		    (priv->ieee80211->beinretry == false) &&
-		    (priv->eRFPowerState == RF_ON))
-			IPSEnter(dev);
-	}
-	if ((priv->ieee80211->state == IEEE80211_LINKED) &&
-		(priv->ieee80211->iw_mode == IW_MODE_INFRA)) {
-		SlotIndex = (priv->link_detect.slot_index++) %
-			priv->link_detect.slot_num;
-
-		priv->link_detect.rx_frame_num[SlotIndex] =
-			priv->ieee80211->NumRxDataInPeriod +
-			priv->ieee80211->NumRxBcnInPeriod;
-
-		for (i = 0; i < priv->link_detect.slot_num; i++)
-			TotalRxNum += priv->link_detect.rx_frame_num[i];
-
-		if (TotalRxNum == 0) {
-			priv->ieee80211->state = IEEE80211_ASSOCIATING;
-			queue_work(priv->ieee80211->wq,
-				&priv->ieee80211->associate_procedure_wq);
-		}
-	}
-
-	MgntLinkKeepAlive(priv);
-
-	LeisurePSLeave(priv);
-
-	if (priv->ieee80211->state == IEEE80211_LINKED) {
-		priv->link_detect.num_rx_ok_in_period =
-			priv->ieee80211->NumRxDataInPeriod;
-		if (priv->link_detect.num_rx_ok_in_period > 666 ||
-			priv->link_detect.num_tx_ok_in_period > 666) {
-			bBusyTraffic = true;
-		}
-		if ((priv->link_detect.num_rx_ok_in_period +
-			priv->link_detect.num_tx_ok_in_period > 8)
-			|| (priv->link_detect.num_rx_ok_in_period > 2)) {
-			bEnterPS = false;
-		} else
-			bEnterPS = true;
-
-		if (bEnterPS)
-			LeisurePSEnter(priv);
-		else
-			LeisurePSLeave(priv);
-	} else
-		LeisurePSLeave(priv);
-	priv->link_detect.b_busy_traffic = bBusyTraffic;
-	priv->link_detect.num_rx_ok_in_period = 0;
-	priv->link_detect.num_tx_ok_in_period = 0;
-	priv->ieee80211->NumRxDataInPeriod = 0;
-	priv->ieee80211->NumRxBcnInPeriod = 0;
-}
-
-static int _rtl8180_up(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	priv->up = 1;
-
-	DMESG("Bringing up iface");
-	rtl8185b_adapter_start(dev);
-	rtl8185b_rx_enable(dev);
-	rtl8185b_tx_enable(dev);
-	if (priv->bInactivePs) {
-		if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
-			IPSLeave(dev);
-	}
-	timer_rate_adaptive((unsigned long)dev);
-	watch_dog_adaptive((unsigned long)dev);
-	if (priv->bSwAntennaDiverity)
-			SwAntennaDiversityTimerCallback(dev);
-	ieee80211_softmac_start_protocol(priv->ieee80211);
-	return 0;
-}
-
-static int rtl8180_open(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-	down(&priv->wx_sem);
-	ret = rtl8180_up(dev);
-	up(&priv->wx_sem);
-	return ret;
-}
-
-int rtl8180_up(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->up == 1)
-		return -1;
-
-	return _rtl8180_up(dev);
-}
-
-static int rtl8180_close(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-	down(&priv->wx_sem);
-	ret = rtl8180_down(dev);
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-int rtl8180_down(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->up == 0)
-		return -1;
-
-	priv->up = 0;
-
-	ieee80211_softmac_stop_protocol(priv->ieee80211);
-	/* FIXME */
-	if (!netif_queue_stopped(dev))
-		netif_stop_queue(dev);
-	rtl8180_rtx_disable(dev);
-	rtl8180_irq_disable(dev);
-	del_timer_sync(&priv->watch_dog_timer);
-	del_timer_sync(&priv->rateadapter_timer);
-	cancel_delayed_work(&priv->ieee80211->rate_adapter_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_wakeup_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_sleep_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_dig_wq);
-	cancel_delayed_work(&priv->ieee80211->tx_pw_wq);
-	del_timer_sync(&priv->SwAntennaDiversityTimer);
-	SetZebraRFPowerState8185(dev, RF_OFF);
-	memset(&priv->ieee80211->current_network,
-		0, sizeof(struct ieee80211_network));
-	priv->ieee80211->state = IEEE80211_NOLINK;
-	return 0;
-}
-
-void rtl8180_restart_wq(struct work_struct *work)
-{
-	struct r8180_priv *priv = container_of(
-		work, struct r8180_priv, reset_wq);
-	struct net_device *dev = priv->dev;
-
-	down(&priv->wx_sem);
-
-	rtl8180_commit(dev);
-
-	up(&priv->wx_sem);
-}
-
-static void rtl8180_restart(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	schedule_work(&priv->reset_wq);
-}
-
-void rtl8180_commit(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->up == 0)
-		return;
-
-	del_timer_sync(&priv->watch_dog_timer);
-	del_timer_sync(&priv->rateadapter_timer);
-	cancel_delayed_work(&priv->ieee80211->rate_adapter_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_wakeup_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_sleep_wq);
-	cancel_delayed_work(&priv->ieee80211->hw_dig_wq);
-	cancel_delayed_work(&priv->ieee80211->tx_pw_wq);
-	del_timer_sync(&priv->SwAntennaDiversityTimer);
-	ieee80211_softmac_stop_protocol(priv->ieee80211);
-	rtl8180_irq_disable(dev);
-	rtl8180_rtx_disable(dev);
-	_rtl8180_up(dev);
-}
-
-static void r8180_set_multicast(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	short promisc;
-
-	promisc = (dev->flags & IFF_PROMISC) ? 1 : 0;
-
-	if (promisc != priv->promisc)
-		rtl8180_restart(dev);
-
-	priv->promisc = promisc;
-}
-
-static int r8180_set_mac_adr(struct net_device *dev, void *mac)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct sockaddr *addr = mac;
-
-	down(&priv->wx_sem);
-
-	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
-
-	if (priv->ieee80211->iw_mode == IW_MODE_MASTER)
-		memcpy(priv->ieee80211->current_network.bssid,
-			dev->dev_addr, ETH_ALEN);
-
-	if (priv->up) {
-		rtl8180_down(dev);
-		rtl8180_up(dev);
-	}
-
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-/* based on ipw2200 driver */
-static int rtl8180_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct iwreq *wrq = (struct iwreq *) rq;
-	int ret = -1;
-
-	switch (cmd) {
-	case RTL_IOCTL_WPA_SUPPLICANT:
-		ret = ieee80211_wpa_supplicant_ioctl(
-			priv->ieee80211, &wrq->u.data);
-		return ret;
-	default:
-		return -EOPNOTSUPP;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-static const struct net_device_ops rtl8180_netdev_ops = {
-	.ndo_open		= rtl8180_open,
-	.ndo_stop		= rtl8180_close,
-	.ndo_get_stats		= rtl8180_stats,
-	.ndo_tx_timeout		= rtl8180_restart,
-	.ndo_do_ioctl		= rtl8180_ioctl,
-	.ndo_set_rx_mode	= r8180_set_multicast,
-	.ndo_set_mac_address	= r8180_set_mac_adr,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_start_xmit		= ieee80211_rtl_xmit,
-};
-
-static int rtl8180_pci_probe(struct pci_dev *pdev,
-			     const struct pci_device_id *id)
-{
-	unsigned long ioaddr = 0;
-	struct net_device *dev = NULL;
-	struct r8180_priv *priv = NULL;
-	u8 unit = 0;
-	int ret = -ENODEV;
-
-	unsigned long pmem_start, pmem_len, pmem_flags;
-
-	DMESG("Configuring chip resources");
-
-	if (pci_enable_device(pdev)) {
-		DMESG("Failed to enable PCI device");
-		return -EIO;
-	}
-
-	pci_set_master(pdev);
-	pci_set_dma_mask(pdev, 0xffffff00ULL);
-	pci_set_consistent_dma_mask(pdev, 0xffffff00ULL);
-	dev = alloc_ieee80211(sizeof(struct r8180_priv));
-	if (!dev) {
-		ret = -ENOMEM;
-		goto fail_free;
-	}
-	priv = ieee80211_priv(dev);
-	priv->ieee80211 = netdev_priv(dev);
-
-	pci_set_drvdata(pdev, dev);
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-	priv = ieee80211_priv(dev);
-	priv->pdev = pdev;
-
-	pmem_start = pci_resource_start(pdev, 1);
-	pmem_len = pci_resource_len(pdev, 1);
-	pmem_flags = pci_resource_flags(pdev, 1);
-
-	if (!(pmem_flags & IORESOURCE_MEM)) {
-		DMESG("region #1 not a MMIO resource, aborting");
-		goto fail;
-	}
-
-	if (!request_mem_region(pmem_start, pmem_len, RTL8180_MODULE_NAME)) {
-		DMESG("request_mem_region failed!");
-		goto fail;
-	}
-
-	ioaddr = (unsigned long)ioremap_nocache(pmem_start, pmem_len);
-	if (ioaddr == (unsigned long)NULL) {
-		DMESG("ioremap failed!");
-		goto fail1;
-	}
-
-	dev->mem_start = ioaddr; /* shared mem start */
-	dev->mem_end = ioaddr + pci_resource_len(pdev, 0); /* shared mem end */
-
-	pci_read_config_byte(pdev, 0x05, &unit);
-	pci_write_config_byte(pdev, 0x05, unit & (~0x04));
-
-	dev->irq = pdev->irq;
-	priv->irq = 0;
-
-	dev->netdev_ops = &rtl8180_netdev_ops;
-	dev->wireless_handlers = &r8180_wx_handlers_def;
-
-	dev->type = ARPHRD_ETHER;
-	dev->watchdog_timeo = HZ*3;
-
-	if (dev_alloc_name(dev, ifname) < 0) {
-		DMESG("Oops: devname already taken! Trying wlan%%d...\n");
-		strcpy(ifname, "wlan%d");
-		dev_alloc_name(dev, ifname);
-	}
-
-	if (rtl8180_init(dev) != 0) {
-		DMESG("Initialization failed");
-		goto fail1;
-	}
-
-	netif_carrier_off(dev);
-
-	if (register_netdev(dev))
-		goto fail1;
-
-	rtl8180_proc_init_one(dev);
-
-	DMESG("Driver probe completed\n");
-	return 0;
-fail1:
-	if (dev->mem_start != (unsigned long)NULL) {
-		iounmap((void __iomem *)dev->mem_start);
-		release_mem_region(pci_resource_start(pdev, 1),
-				   pci_resource_len(pdev, 1));
-	}
-fail:
-	if (dev) {
-		if (priv->irq) {
-			free_irq(dev->irq, dev);
-			dev->irq = 0;
-		}
-		free_ieee80211(dev);
-	}
-
-fail_free:
-	pci_disable_device(pdev);
-
-	DMESG("wlan driver load failed\n");
-	return ret;
-}
-
-static void rtl8180_pci_remove(struct pci_dev *pdev)
-{
-	struct r8180_priv *priv;
-	struct net_device *dev = pci_get_drvdata(pdev);
-
-	if (dev) {
-		unregister_netdev(dev);
-
-		priv = ieee80211_priv(dev);
-
-		rtl8180_proc_remove_one(dev);
-		rtl8180_down(dev);
-		priv->rf_close(dev);
-		rtl8180_reset(dev);
-		mdelay(10);
-
-		if (priv->irq) {
-			DMESG("Freeing irq %d", dev->irq);
-			free_irq(dev->irq, dev);
-			priv->irq = 0;
-		}
-
-		free_rx_desc_ring(dev);
-		free_tx_desc_rings(dev);
-
-		if (dev->mem_start != (unsigned long)NULL) {
-			iounmap((void __iomem *)dev->mem_start);
-			release_mem_region(pci_resource_start(pdev, 1),
-					   pci_resource_len(pdev, 1));
-		}
-
-		free_ieee80211(dev);
-	}
-	pci_disable_device(pdev);
-
-	DMESG("wlan driver removed\n");
-}
-
-static int __init rtl8180_pci_module_init(void)
-{
-	int ret;
-
-	ret = ieee80211_crypto_init();
-	if (ret) {
-		pr_err("ieee80211_crypto_init() failed %d\n", ret);
-		return ret;
-	}
-	ret = ieee80211_crypto_tkip_init();
-	if (ret) {
-		pr_err("ieee80211_crypto_tkip_init() failed %d\n", ret);
-		return ret;
-	}
-	ret = ieee80211_crypto_ccmp_init();
-	if (ret) {
-		pr_err("ieee80211_crypto_ccmp_init() failed %d\n", ret);
-		return ret;
-	}
-	ret = ieee80211_crypto_wep_init();
-	if (ret) {
-		pr_err("ieee80211_crypto_wep_init() failed %d\n", ret);
-		return ret;
-	}
-
-	pr_info("\nLinux kernel driver for RTL8180 / RTL8185 based WLAN cards\n");
-	pr_info("Copyright (c) 2004-2005, Andrea Merello\n");
-	DMESG("Initializing module");
-	DMESG("Wireless extensions version %d", WIRELESS_EXT);
-	rtl8180_proc_module_init();
-
-	if (pci_register_driver(&rtl8180_pci_driver)) {
-		DMESG("No device found");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static void __exit rtl8180_pci_module_exit(void)
-{
-	pci_unregister_driver(&rtl8180_pci_driver);
-	rtl8180_proc_module_remove();
-	ieee80211_crypto_tkip_exit();
-	ieee80211_crypto_ccmp_exit();
-	ieee80211_crypto_wep_exit();
-	ieee80211_crypto_deinit();
-	DMESG("Exiting");
-}
-
-static void rtl8180_try_wake_queue(struct net_device *dev, int pri)
-{
-	unsigned long flags;
-	short enough_desc;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	enough_desc = check_nic_enought_desc(dev, pri);
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
-	if (enough_desc)
-		ieee80211_rtl_wake_queue(priv->ieee80211);
-}
-
-static void rtl8180_tx_isr(struct net_device *dev, int pri, short error)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u32 *tail; /* tail virtual addr */
-	u32 *head; /* head virtual addr */
-	u32 *begin; /* start of ring virtual addr */
-	u32 *nicv; /* nic pointer virtual addr */
-	u32 nic; /* nic pointer physical addr */
-	u32 nicbegin; /* start of ring physical addr */
-	unsigned long flag;
-	/* physical addr are ok on 32 bits since we set DMA mask */
-	int offs;
-	int j, i;
-	int hd;
-	if (error)
-		priv->stats.txretry++;
-	spin_lock_irqsave(&priv->tx_lock, flag);
-	switch (pri) {
-	case MANAGE_PRIORITY:
-		tail = priv->txmapringtail;
-		begin = priv->txmapring;
-		head = priv->txmapringhead;
-		nic = read_nic_dword(dev, TX_MANAGEPRIORITY_RING_ADDR);
-		nicbegin = priv->txmapringdma;
-		break;
-	case BK_PRIORITY:
-		tail = priv->txbkpringtail;
-		begin = priv->txbkpring;
-		head = priv->txbkpringhead;
-		nic = read_nic_dword(dev, TX_BKPRIORITY_RING_ADDR);
-		nicbegin = priv->txbkpringdma;
-		break;
-	case BE_PRIORITY:
-		tail = priv->txbepringtail;
-		begin = priv->txbepring;
-		head = priv->txbepringhead;
-		nic = read_nic_dword(dev, TX_BEPRIORITY_RING_ADDR);
-		nicbegin = priv->txbepringdma;
-		break;
-	case VI_PRIORITY:
-		tail = priv->txvipringtail;
-		begin = priv->txvipring;
-		head = priv->txvipringhead;
-		nic = read_nic_dword(dev, TX_VIPRIORITY_RING_ADDR);
-		nicbegin = priv->txvipringdma;
-		break;
-	case VO_PRIORITY:
-		tail = priv->txvopringtail;
-		begin = priv->txvopring;
-		head = priv->txvopringhead;
-		nic = read_nic_dword(dev, TX_VOPRIORITY_RING_ADDR);
-		nicbegin = priv->txvopringdma;
-		break;
-	case HI_PRIORITY:
-		tail = priv->txhpringtail;
-		begin = priv->txhpring;
-		head = priv->txhpringhead;
-		nic = read_nic_dword(dev, TX_HIGHPRIORITY_RING_ADDR);
-		nicbegin = priv->txhpringdma;
-		break;
-
-	default:
-		spin_unlock_irqrestore(&priv->tx_lock, flag);
-		return;
-	}
-
-	nicv = (u32 *)((nic - nicbegin) + (u8 *)begin);
-	if ((head <= tail && (nicv > tail || nicv < head)) ||
-		(head > tail && (nicv > tail && nicv < head))) {
-			DMESGW("nic has lost pointer");
-			spin_unlock_irqrestore(&priv->tx_lock, flag);
-			rtl8180_restart(dev);
-			return;
-		}
-
-	/*
-	 * We check all the descriptors between the head and the nic,
-	 * but not the currently pointed by the nic (the next to be txed)
-	 * and the previous of the pointed (might be in process ??)
-	 */
-	offs = (nic - nicbegin);
-	offs = offs / 8 / 4;
-	hd = (head - begin) / 8;
-
-	if (offs >= hd)
-		j = offs - hd;
-	else
-		j = offs + (priv->txringcount-1-hd);
-
-	j -= 2;
-	if (j < 0)
-		j = 0;
-
-	for (i = 0; i < j; i++) {
-		if ((*head) & (1<<31))
-			break;
-		if (((*head)&(0x10000000)) != 0) {
-			priv->CurrRetryCnt += (u16)((*head) & (0x000000ff));
-			if (!error)
-				priv->NumTxOkTotal++;
-		}
-
-		if (!error)
-			priv->NumTxOkBytesTotal += (*(head+3)) & (0x00000fff);
-
-		*head = *head & ~(1<<31);
-
-		if ((head - begin)/8 == priv->txringcount-1)
-			head = begin;
-		else
-			head += 8;
-	}
-
-	/*
-	 * The head has been moved to the last certainly TXed
-	 * (or at least processed by the nic) packet.
-	 * The driver take forcefully owning of all these packets
-	 * If the packet previous of the nic pointer has been
-	 * processed this doesn't matter: it will be checked
-	 * here at the next round. Anyway if no more packet are
-	 * TXed no memory leak occur at all.
-	 */
-
-	switch (pri) {
-	case MANAGE_PRIORITY:
-		priv->txmapringhead = head;
-
-		if (priv->ack_tx_to_ieee) {
-			if (rtl8180_is_tx_queue_empty(dev)) {
-				priv->ack_tx_to_ieee = 0;
-				ieee80211_ps_tx_ack(priv->ieee80211, !error);
-			}
-		}
-		break;
-	case BK_PRIORITY:
-		priv->txbkpringhead = head;
-		break;
-	case BE_PRIORITY:
-		priv->txbepringhead = head;
-		break;
-	case VI_PRIORITY:
-		priv->txvipringhead = head;
-		break;
-	case VO_PRIORITY:
-		priv->txvopringhead = head;
-		break;
-	case HI_PRIORITY:
-		priv->txhpringhead = head;
-		break;
-	}
-
-	spin_unlock_irqrestore(&priv->tx_lock, flag);
-}
-
-static irqreturn_t rtl8180_interrupt(int irq, void *netdev)
-{
-	struct net_device *dev = (struct net_device *) netdev;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	unsigned long flags;
-	u32 inta;
-
-	/* We should return IRQ_NONE, but for now let me keep this */
-	if (priv->irq_enabled == 0)
-		return IRQ_HANDLED;
-
-	spin_lock_irqsave(&priv->irq_th_lock, flags);
-
-	/* ISR: 4bytes */
-	inta = read_nic_dword(dev, ISR);
-	write_nic_dword(dev, ISR, inta); /* reset int situation */
-
-	priv->stats.shints++;
-
-	if (!inta) {
-		spin_unlock_irqrestore(&priv->irq_th_lock, flags);
-		return IRQ_HANDLED;
-	/*
-	 * most probably we can safely return IRQ_NONE,
-	 * but for now is better to avoid problems
-	 */
-	}
-
-	if (inta == 0xffff) {
-		/* HW disappeared */
-		spin_unlock_irqrestore(&priv->irq_th_lock, flags);
-		return IRQ_HANDLED;
-	}
-
-	priv->stats.ints++;
-
-	if (!netif_running(dev)) {
-		spin_unlock_irqrestore(&priv->irq_th_lock, flags);
-		return IRQ_HANDLED;
-	}
-
-	if (inta & ISR_TimeOut)
-		write_nic_dword(dev, TimerInt, 0);
-
-	if (inta & ISR_TBDOK)
-		priv->stats.txbeacon++;
-
-	if (inta & ISR_TBDER)
-		priv->stats.txbeaconerr++;
-
-	if (inta & IMR_TMGDOK)
-		rtl8180_tx_isr(dev, MANAGE_PRIORITY, 0);
-
-	if (inta & ISR_THPDER) {
-		priv->stats.txhperr++;
-		rtl8180_tx_isr(dev, HI_PRIORITY, 1);
-		priv->ieee80211->stats.tx_errors++;
-	}
-
-	if (inta & ISR_THPDOK) { /* High priority tx ok */
-		priv->link_detect.num_tx_ok_in_period++;
-		priv->stats.txhpokint++;
-		rtl8180_tx_isr(dev, HI_PRIORITY, 0);
-	}
-
-	if (inta & ISR_RER)
-		priv->stats.rxerr++;
-
-	if (inta & ISR_TBKDER) { /* corresponding to BK_PRIORITY */
-		priv->stats.txbkperr++;
-		priv->ieee80211->stats.tx_errors++;
-		rtl8180_tx_isr(dev, BK_PRIORITY, 1);
-		rtl8180_try_wake_queue(dev, BK_PRIORITY);
-	}
-
-	if (inta & ISR_TBEDER) { /* corresponding to BE_PRIORITY */
-		priv->stats.txbeperr++;
-		priv->ieee80211->stats.tx_errors++;
-		rtl8180_tx_isr(dev, BE_PRIORITY, 1);
-		rtl8180_try_wake_queue(dev, BE_PRIORITY);
-	}
-	if (inta & ISR_TNPDER) { /* corresponding to VO_PRIORITY */
-		priv->stats.txnperr++;
-		priv->ieee80211->stats.tx_errors++;
-		rtl8180_tx_isr(dev, NORM_PRIORITY, 1);
-		rtl8180_try_wake_queue(dev, NORM_PRIORITY);
-	}
-
-	if (inta & ISR_TLPDER) { /* corresponding to VI_PRIORITY */
-		priv->stats.txlperr++;
-		priv->ieee80211->stats.tx_errors++;
-		rtl8180_tx_isr(dev, LOW_PRIORITY, 1);
-		rtl8180_try_wake_queue(dev, LOW_PRIORITY);
-	}
-
-	if (inta & ISR_ROK) {
-		priv->stats.rxint++;
-		tasklet_schedule(&priv->irq_rx_tasklet);
-	}
-
-	if (inta & ISR_RQoSOK) {
-		priv->stats.rxint++;
-		tasklet_schedule(&priv->irq_rx_tasklet);
-	}
-
-	if (inta & ISR_BcnInt)
-		rtl8180_prepare_beacon(dev);
-
-	if (inta & ISR_RDU) {
-		DMESGW("No RX descriptor available");
-		priv->stats.rxrdu++;
-		tasklet_schedule(&priv->irq_rx_tasklet);
-	}
-
-	if (inta & ISR_RXFOVW) {
-		priv->stats.rxoverflow++;
-		tasklet_schedule(&priv->irq_rx_tasklet);
-	}
-
-	if (inta & ISR_TXFOVW)
-		priv->stats.txoverflow++;
-
-	if (inta & ISR_TNPDOK) { /* Normal priority tx ok */
-		priv->link_detect.num_tx_ok_in_period++;
-		priv->stats.txnpokint++;
-		rtl8180_tx_isr(dev, NORM_PRIORITY, 0);
-		rtl8180_try_wake_queue(dev, NORM_PRIORITY);
-	}
-
-	if (inta & ISR_TLPDOK) { /* Low priority tx ok */
-		priv->link_detect.num_tx_ok_in_period++;
-		priv->stats.txlpokint++;
-		rtl8180_tx_isr(dev, LOW_PRIORITY, 0);
-		rtl8180_try_wake_queue(dev, LOW_PRIORITY);
-	}
-
-	if (inta & ISR_TBKDOK) { /* corresponding to BK_PRIORITY */
-		priv->stats.txbkpokint++;
-		priv->link_detect.num_tx_ok_in_period++;
-		rtl8180_tx_isr(dev, BK_PRIORITY, 0);
-		rtl8180_try_wake_queue(dev, BE_PRIORITY);
-	}
-
-	if (inta & ISR_TBEDOK) { /* corresponding to BE_PRIORITY */
-		priv->stats.txbeperr++;
-		priv->link_detect.num_tx_ok_in_period++;
-		rtl8180_tx_isr(dev, BE_PRIORITY, 0);
-		rtl8180_try_wake_queue(dev, BE_PRIORITY);
-	}
-	force_pci_posting(dev);
-	spin_unlock_irqrestore(&priv->irq_th_lock, flags);
-
-	return IRQ_HANDLED;
-}
-
-void rtl8180_irq_rx_tasklet(struct r8180_priv *priv)
-{
-	rtl8180_rx(priv->dev);
-}
-
-void GPIOChangeRFWorkItemCallBack(struct work_struct *work)
-{
-	struct ieee80211_device *ieee = container_of(
-		work, struct ieee80211_device, GPIOChangeRFWorkItem.work);
-	struct net_device *dev = ieee->dev;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 btPSR;
-	u8 btConfig0;
-	enum rt_rf_power_state eRfPowerStateToSet;
-	bool bActuallySet = false;
-
-	char *argv[3];
-	static char *RadioPowerPath = "/etc/acpi/events/RadioPower.sh";
-	static char *envp[] = {"HOME=/", "TERM=linux",
-		"PATH=/usr/bin:/bin", NULL};
-	static int readf_count;
-
-	readf_count = (readf_count+1)%0xffff;
-	/* We should turn off LED before polling FF51[4]. */
-
-	/* Turn off LED. */
-	btPSR = read_nic_byte(dev, PSR);
-	write_nic_byte(dev, PSR, (btPSR & ~BIT3));
-
-	/* It need to delay 4us suggested */
-	udelay(4);
-
-	/* HW radio On/Off according to the value of FF51[4](config0) */
-	btConfig0 = btPSR = read_nic_byte(dev, CONFIG0);
-
-	eRfPowerStateToSet = (btConfig0 & BIT4) ?  RF_ON : RF_OFF;
-
-	/* Turn LED back on when radio enabled */
-	if (eRfPowerStateToSet == RF_ON)
-		write_nic_byte(dev, PSR, btPSR | BIT3);
-
-	if ((priv->ieee80211->bHwRadioOff == true) &&
-	   (eRfPowerStateToSet == RF_ON)) {
-		priv->ieee80211->bHwRadioOff = false;
-		bActuallySet = true;
-	} else if ((priv->ieee80211->bHwRadioOff == false) &&
-		  (eRfPowerStateToSet == RF_OFF)) {
-		priv->ieee80211->bHwRadioOff = true;
-		bActuallySet = true;
-	}
-
-	if (bActuallySet) {
-		MgntActSet_RF_State(dev, eRfPowerStateToSet, RF_CHANGE_BY_HW);
-
-		/* To update the UI status for Power status changed */
-		if (priv->ieee80211->bHwRadioOff == true)
-			argv[1] = "RFOFF";
-		else
-			argv[1] = "RFON";
-		argv[0] = RadioPowerPath;
-		argv[2] = NULL;
-
-		call_usermodehelper(RadioPowerPath, argv, envp, UMH_WAIT_PROC);
-	}
-}
-
-module_init(rtl8180_pci_module_init);
-module_exit(rtl8180_pci_module_exit);
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
deleted file mode 100644
index 8c020e064869..000000000000
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ /dev/null
@@ -1,1139 +0,0 @@
-#include "r8180_dm.h"
-#include "r8180_hw.h"
-#include "r8180_93cx6.h"
-
- /*	Return TRUE if we shall perform High Power Mechanism, FALSE otherwise. */
-#define RATE_ADAPTIVE_TIMER_PERIOD      300
-
-bool CheckHighPower(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-
-	if (!priv->bRegHighPowerMechanism)
-		return false;
-
-	if (ieee->state == IEEE80211_LINKED_SCANNING)
-		return false;
-
-	return true;
-}
-
-/*
- *	Description:
- *		Update Tx power level if necessary.
- *		See also DoRxHighPower() and SetTxPowerLevel8185() for reference.
- *
- *	Note:
- *		The reason why we udpate Tx power level here instead of DoRxHighPower()
- *		is the number of IO to change Tx power is much more than channel TR switch
- *		and they are related to OFDM and MAC registers.
- *		So, we don't want to update it so frequently in per-Rx packet base.
- */
-static void DoTxHighPower(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16			HiPwrUpperTh = 0;
-	u16			HiPwrLowerTh = 0;
-	u8			RSSIHiPwrUpperTh;
-	u8			RSSIHiPwrLowerTh;
-	u8			u1bTmp;
-	char			OfdmTxPwrIdx, CckTxPwrIdx;
-
-	HiPwrUpperTh = priv->RegHiPwrUpperTh;
-	HiPwrLowerTh = priv->RegHiPwrLowerTh;
-
-	HiPwrUpperTh = HiPwrUpperTh * 10;
-	HiPwrLowerTh = HiPwrLowerTh * 10;
-	RSSIHiPwrUpperTh = priv->RegRSSIHiPwrUpperTh;
-	RSSIHiPwrLowerTh = priv->RegRSSIHiPwrLowerTh;
-
-	/* lzm add 080826 */
-	OfdmTxPwrIdx  = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel];
-	CckTxPwrIdx  = priv->chtxpwr[priv->ieee80211->current_network.channel];
-
-	if ((priv->UndecoratedSmoothedSS > HiPwrUpperTh) ||
-		(priv->bCurCCKPkt && (priv->CurCCKRSSI > RSSIHiPwrUpperTh))) {
-		/* Stevenl suggested that degrade 8dbm in high power sate. 2007-12-04 Isaiah */
-
-		priv->bToUpdateTxPwr = true;
-		u1bTmp = read_nic_byte(dev, CCK_TXAGC);
-
-		/* If it never enter High Power. */
-		if (CckTxPwrIdx == u1bTmp) {
-			u1bTmp = (u1bTmp > 16) ? (u1bTmp - 16) : 0;  /* 8dbm */
-			write_nic_byte(dev, CCK_TXAGC, u1bTmp);
-
-			u1bTmp = read_nic_byte(dev, OFDM_TXAGC);
-			u1bTmp = (u1bTmp > 16) ? (u1bTmp - 16) : 0;  /* 8dbm */
-			write_nic_byte(dev, OFDM_TXAGC, u1bTmp);
-		}
-
-	} else if ((priv->UndecoratedSmoothedSS < HiPwrLowerTh) &&
-		(!priv->bCurCCKPkt || priv->CurCCKRSSI < RSSIHiPwrLowerTh)) {
-		if (priv->bToUpdateTxPwr) {
-			priv->bToUpdateTxPwr = false;
-			/* SD3 required. */
-			u1bTmp = read_nic_byte(dev, CCK_TXAGC);
-			if (u1bTmp < CckTxPwrIdx) {
-				write_nic_byte(dev, CCK_TXAGC, CckTxPwrIdx);
-			}
-
-			u1bTmp = read_nic_byte(dev, OFDM_TXAGC);
-			if (u1bTmp < OfdmTxPwrIdx) {
-				write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);
-			}
-		}
-	}
-}
-
-
-/*
- *	Description:
- *		Callback function of UpdateTxPowerWorkItem.
- *		Because of some event happened, e.g. CCX TPC, High Power Mechanism,
- *		We update Tx power of current channel again.
- */
-void rtl8180_tx_pw_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, tx_pw_wq);
-	struct net_device *dev = ieee->dev;
-
-	DoTxHighPower(dev);
-}
-
-
-/*
- *	Return TRUE if we shall perform DIG Mechanism, FALSE otherwise.
- */
-bool CheckDig(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-
-	if (!priv->bDigMechanism)
-		return false;
-
-	if (ieee->state != IEEE80211_LINKED)
-		return false;
-
-	if ((priv->ieee80211->rate / 5) < 36) /* Schedule Dig under all OFDM rates. By Bruce, 2007-06-01. */
-		return false;
-	return true;
-}
-/*
- *	Implementation of DIG for Zebra and Zebra2.
- */
-static void DIG_Zebra(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16			CCKFalseAlarm, OFDMFalseAlarm;
-	u16			OfdmFA1, OfdmFA2;
-	int			InitialGainStep = 7; /* The number of initial gain stages. */
-	int			LowestGainStage = 4; /* The capable lowest stage of performing dig workitem. */
-	u32			AwakePeriodIn2Sec = 0;
-
-	CCKFalseAlarm = (u16)(priv->FalseAlarmRegValue & 0x0000ffff);
-	OFDMFalseAlarm = (u16)((priv->FalseAlarmRegValue >> 16) & 0x0000ffff);
-	OfdmFA1 =  0x15;
-	OfdmFA2 = ((u16)(priv->RegDigOfdmFaUpTh)) << 8;
-
-	/* The number of initial gain steps is different, by Bruce, 2007-04-13. */
-	if (priv->InitialGain == 0) { /* autoDIG */
-		/* Advised from SD3 DZ */
-		priv->InitialGain = 4; /* In 87B, m74dBm means State 4 (m82dBm) */
-	}
-	/* Advised from SD3 DZ */
-	OfdmFA1 = 0x20;
-
-#if 1 /* lzm reserved 080826 */
-	AwakePeriodIn2Sec = (2000 - priv->DozePeriodInPast2Sec);
-	priv->DozePeriodInPast2Sec = 0;
-
-	if (AwakePeriodIn2Sec) {
-		OfdmFA1 = (u16)((OfdmFA1 * AwakePeriodIn2Sec) / 2000);
-		OfdmFA2 = (u16)((OfdmFA2 * AwakePeriodIn2Sec) / 2000);
-	} else {
-		;
-	}
-#endif
-
-	InitialGainStep = 8;
-	LowestGainStage = priv->RegBModeGainStage; /* Lowest gain stage. */
-
-	if (OFDMFalseAlarm > OfdmFA1) {
-		if (OFDMFalseAlarm > OfdmFA2) {
-			priv->DIG_NumberFallbackVote++;
-			if (priv->DIG_NumberFallbackVote > 1) {
-				/* serious OFDM  False Alarm, need fallback */
-				if (priv->InitialGain < InitialGainStep) {
-					priv->InitialGainBackUp = priv->InitialGain;
-
-					priv->InitialGain = (priv->InitialGain + 1);
-					UpdateInitialGain(dev);
-				}
-				priv->DIG_NumberFallbackVote = 0;
-				priv->DIG_NumberUpgradeVote = 0;
-			}
-		} else {
-			if (priv->DIG_NumberFallbackVote)
-				priv->DIG_NumberFallbackVote--;
-		}
-		priv->DIG_NumberUpgradeVote = 0;
-	} else {
-		if (priv->DIG_NumberFallbackVote)
-			priv->DIG_NumberFallbackVote--;
-		priv->DIG_NumberUpgradeVote++;
-
-		if (priv->DIG_NumberUpgradeVote > 9) {
-			if (priv->InitialGain > LowestGainStage) { /* In 87B, m78dBm means State 4 (m864dBm) */
-				priv->InitialGainBackUp = priv->InitialGain;
-
-				priv->InitialGain = (priv->InitialGain - 1);
-				UpdateInitialGain(dev);
-			}
-			priv->DIG_NumberFallbackVote = 0;
-			priv->DIG_NumberUpgradeVote = 0;
-		}
-	}
-}
-
-/*
- *	Dispatch DIG implementation according to RF.
- */
-static void DynamicInitGain(struct net_device *dev)
-{
-	DIG_Zebra(dev);
-}
-
-void rtl8180_hw_dig_wq(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, hw_dig_wq);
-	struct net_device *dev = ieee->dev;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	/* Read CCK and OFDM False Alarm. */
-	priv->FalseAlarmRegValue = read_nic_dword(dev, CCK_FALSE_ALARM);
-
-
-	/* Adjust Initial Gain dynamically. */
-	DynamicInitGain(dev);
-
-}
-
-static int IncludedInSupportedRates(struct r8180_priv *priv, u8 TxRate)
-{
-	u8 rate_len;
-	u8 rate_ex_len;
-	u8                      RateMask = 0x7F;
-	u8                      idx;
-	unsigned short          Found = 0;
-	u8                      NaiveTxRate = TxRate&RateMask;
-
-	rate_len = priv->ieee80211->current_network.rates_len;
-	rate_ex_len = priv->ieee80211->current_network.rates_ex_len;
-	for (idx = 0; idx < rate_len; idx++) {
-		if ((priv->ieee80211->current_network.rates[idx] & RateMask) == NaiveTxRate) {
-			Found = 1;
-			goto found_rate;
-		}
-	}
-	for (idx = 0; idx < rate_ex_len; idx++) {
-		if ((priv->ieee80211->current_network.rates_ex[idx] & RateMask) == NaiveTxRate) {
-			Found = 1;
-			goto found_rate;
-		}
-	}
-	return Found;
-found_rate:
-	return Found;
-}
-
-/*
- *	Get the Tx rate one degree up form the input rate in the supported rates.
- *	Return the upgrade rate if it is successed, otherwise return the input rate.
- */
-static u8 GetUpgradeTxRate(struct net_device *dev, u8 rate)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8                      UpRate;
-
-	/* Upgrade 1 degree. */
-	switch (rate) {
-	case 108: /* Up to 54Mbps. */
-		UpRate = 108;
-		break;
-
-	case 96: /* Up to 54Mbps. */
-		UpRate = 108;
-		break;
-
-	case 72: /* Up to 48Mbps. */
-		UpRate = 96;
-		break;
-
-	case 48: /* Up to 36Mbps. */
-		UpRate = 72;
-		break;
-
-	case 36: /* Up to 24Mbps. */
-		UpRate = 48;
-		break;
-
-	case 22: /* Up to 18Mbps. */
-		UpRate = 36;
-		break;
-
-	case 11: /* Up to 11Mbps. */
-		UpRate = 22;
-		break;
-
-	case 4: /* Up to 5.5Mbps. */
-		UpRate = 11;
-		break;
-
-	case 2: /* Up to 2Mbps. */
-		UpRate = 4;
-		break;
-
-	default:
-		printk("GetUpgradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate);
-		return rate;
-	}
-	/* Check if the rate is valid. */
-	if (IncludedInSupportedRates(priv, UpRate)) {
-		return UpRate;
-	} else {
-		return rate;
-	}
-	return rate;
-}
-/*
- *	Get the Tx rate one degree down form the input rate in the supported rates.
- *	Return the degrade rate if it is successed, otherwise return the input rate.
- */
-
-static u8 GetDegradeTxRate(struct net_device *dev, u8 rate)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8                      DownRate;
-
-	/* Upgrade 1 degree. */
-	switch (rate) {
-	case 108: /* Down to 48Mbps. */
-		DownRate = 96;
-		break;
-
-	case 96: /* Down to 36Mbps. */
-		DownRate = 72;
-		break;
-
-	case 72: /* Down to 24Mbps. */
-		DownRate = 48;
-		break;
-
-	case 48: /* Down to 18Mbps. */
-		DownRate = 36;
-		break;
-
-	case 36: /* Down to 11Mbps. */
-		DownRate = 22;
-		break;
-
-	case 22: /* Down to 5.5Mbps. */
-		DownRate = 11;
-		break;
-
-	case 11: /* Down to 2Mbps. */
-		DownRate = 4;
-		break;
-
-	case 4: /* Down to 1Mbps. */
-		DownRate = 2;
-		break;
-
-	case 2: /* Down to 1Mbps. */
-		DownRate = 2;
-		break;
-
-	default:
-		printk("GetDegradeTxRate(): Input Tx Rate(%d) is undefined!\n", rate);
-		return rate;
-	}
-	/* Check if the rate is valid. */
-	if (IncludedInSupportedRates(priv, DownRate)) {
-		return DownRate;
-	} else {
-		return rate;
-	}
-	return rate;
-}
-/*
- *      Helper function to determine if specified data rate is
- *      CCK rate.
- */
-
-static bool MgntIsCckRate(u16 rate)
-{
-	bool bReturn = false;
-
-	if ((rate <= 22) && (rate != 12) && (rate != 18)) {
-		bReturn = true;
-	}
-
-	return bReturn;
-}
-/*
- *	Description:
- *		Tx Power tracking mechanism routine on 87SE.
- */
-void TxPwrTracking87SE(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u8	tmpu1Byte, CurrentThermal, Idx;
-	char	CckTxPwrIdx, OfdmTxPwrIdx;
-
-	tmpu1Byte = read_nic_byte(dev, EN_LPF_CAL);
-	CurrentThermal = (tmpu1Byte & 0xf0) >> 4; /*[ 7:4]: thermal meter indication. */
-	CurrentThermal = (CurrentThermal > 0x0c) ? 0x0c : CurrentThermal;/* lzm add 080826 */
-
-	if (CurrentThermal != priv->ThermalMeter) {
-		/* Update Tx Power level on each channel. */
-		for (Idx = 1; Idx < 15; Idx++) {
-			CckTxPwrIdx = priv->chtxpwr[Idx];
-			OfdmTxPwrIdx = priv->chtxpwr_ofdm[Idx];
-
-			if (CurrentThermal > priv->ThermalMeter) {
-				/* higher thermal meter. */
-				CckTxPwrIdx += (CurrentThermal - priv->ThermalMeter) * 2;
-				OfdmTxPwrIdx += (CurrentThermal - priv->ThermalMeter) * 2;
-
-				if (CckTxPwrIdx > 35)
-					CckTxPwrIdx = 35; /* Force TxPower to maximal index. */
-				if (OfdmTxPwrIdx > 35)
-					OfdmTxPwrIdx = 35;
-			} else {
-				/* lower thermal meter. */
-				CckTxPwrIdx -= (priv->ThermalMeter - CurrentThermal) * 2;
-				OfdmTxPwrIdx -= (priv->ThermalMeter - CurrentThermal) * 2;
-
-				if (CckTxPwrIdx < 0)
-					CckTxPwrIdx = 0;
-				if (OfdmTxPwrIdx < 0)
-					OfdmTxPwrIdx = 0;
-			}
-
-			/* Update TxPower level on CCK and OFDM resp. */
-			priv->chtxpwr[Idx] = CckTxPwrIdx;
-			priv->chtxpwr_ofdm[Idx] = OfdmTxPwrIdx;
-		}
-
-		/* Update TxPower level immediately. */
-		rtl8225z2_SetTXPowerLevel(dev, priv->ieee80211->current_network.channel);
-	}
-	priv->ThermalMeter = CurrentThermal;
-}
-static void StaRateAdaptive87SE(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	unsigned long	CurrTxokCnt;
-	u16		CurrRetryCnt;
-	u16		CurrRetryRate;
-	unsigned long	CurrRxokCnt;
-	bool		bTryUp = false;
-	bool		bTryDown = false;
-	u8		TryUpTh = 1;
-	u8		TryDownTh = 2;
-	u32		TxThroughput;
-	long		CurrSignalStrength;
-	bool		bUpdateInitialGain = false;
-	u8		u1bOfdm = 0, u1bCck = 0;
-	char		OfdmTxPwrIdx, CckTxPwrIdx;
-
-	priv->RateAdaptivePeriod = RATE_ADAPTIVE_TIMER_PERIOD;
-
-
-	CurrRetryCnt	= priv->CurrRetryCnt;
-	CurrTxokCnt	= priv->NumTxOkTotal - priv->LastTxokCnt;
-	CurrRxokCnt	= priv->ieee80211->NumRxOkTotal - priv->LastRxokCnt;
-	CurrSignalStrength = priv->Stats_RecvSignalPower;
-	TxThroughput = (u32)(priv->NumTxOkBytesTotal - priv->LastTxOKBytes);
-	priv->LastTxOKBytes = priv->NumTxOkBytesTotal;
-	priv->CurrentOperaRate = priv->ieee80211->rate / 5;
-	/* 2 Compute retry ratio. */
-	if (CurrTxokCnt > 0) {
-		CurrRetryRate = (u16)(CurrRetryCnt * 100 / CurrTxokCnt);
-	} else {
-	/* It may be serious retry. To distinguish serious retry or no packets modified by Bruce */
-		CurrRetryRate = (u16)(CurrRetryCnt * 100 / 1);
-	}
-
-	priv->LastRetryCnt = priv->CurrRetryCnt;
-	priv->LastTxokCnt = priv->NumTxOkTotal;
-	priv->LastRxokCnt = priv->ieee80211->NumRxOkTotal;
-	priv->CurrRetryCnt = 0;
-
-	/* 2No Tx packets, return to init_rate or not? */
-	if (CurrRetryRate == 0 && CurrTxokCnt == 0) {
-		/*
-		 * After 9 (30*300ms) seconds in this condition, we try to raise rate.
-		 */
-		priv->TryupingCountNoData++;
-
-		/* [TRC Dell Lab] Extend raised period from 4.5sec to 9sec, Isaiah 2008-02-15 18:00 */
-		if (priv->TryupingCountNoData > 30) {
-			priv->TryupingCountNoData = 0;
-			priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate);
-			/* Reset Fail Record */
-			priv->LastFailTxRate = 0;
-			priv->LastFailTxRateSS = -200;
-			priv->FailTxRateCount = 0;
-		}
-		goto SetInitialGain;
-	} else {
-		priv->TryupingCountNoData = 0; /*Reset trying up times. */
-	}
-
-
-	/*
-	 * For Netgear case, I comment out the following signal strength estimation,
-	 * which can results in lower rate to transmit when sample is NOT enough (e.g. PING request).
-	 *
-	 * Restructure rate adaptive as the following main stages:
-	 * (1) Add retry threshold in 54M upgrading condition with signal strength.
-	 * (2) Add the mechanism to degrade to CCK rate according to signal strength
-	 *		and retry rate.
-	 * (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated
-	 *		situation, Initial Gain Update is upon on DIG mechanism except CCK rate.
-	 * (4) Add the mechanism of trying to upgrade tx rate.
-	 * (5) Record the information of upping tx rate to avoid trying upping tx rate constantly.
-	 *
-	 */
-
-	/*
-	 * 11Mbps or 36Mbps
-	 * Check more times in these rate(key rates).
-	 */
-	if (priv->CurrentOperaRate == 22 || priv->CurrentOperaRate == 72)
-		TryUpTh += 9;
-	/*
-	 * Let these rates down more difficult.
-	 */
-	if (MgntIsCckRate(priv->CurrentOperaRate) || priv->CurrentOperaRate == 36)
-		TryDownTh += 1;
-
-	/* 1 Adjust Rate. */
-	if (priv->bTryuping == true) {
-		/* 2 For Test Upgrading mechanism
-		 * Note:
-		 *	Sometimes the throughput is upon on the capability between the AP and NIC,
-		 *	thus the low data rate does not improve the performance.
-		 *	We randomly upgrade the data rate and check if the retry rate is improved.
-		 */
-
-		/* Upgrading rate did not improve the retry rate, fallback to the original rate. */
-		if ((CurrRetryRate > 25) && TxThroughput < priv->LastTxThroughput) {
-			/*Not necessary raising rate, fall back rate. */
-			bTryDown = true;
-		} else {
-			priv->bTryuping = false;
-		}
-	} else if (CurrSignalStrength > -47 && (CurrRetryRate < 50)) {
-		/*
-		 * 2For High Power
-		 *
-		 * Return to highest data rate, if signal strength is good enough.
-		 * SignalStrength threshold(-50dbm) is for RTL8186.
-		 * Revise SignalStrength threshold to -51dbm.
-		 */
-		/* Also need to check retry rate for safety, by Bruce, 2007-06-05. */
-		if (priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate) {
-			bTryUp = true;
-			/* Upgrade Tx Rate directly. */
-			priv->TryupingCount += TryUpTh;
-		}
-
-	} else if (CurrTxokCnt > 9 && CurrTxokCnt < 100 && CurrRetryRate >= 600) {
-		/*
-		 *2 For Serious Retry
-		 *
-		 * Traffic is not busy but our Tx retry is serious.
-		 */
-		bTryDown = true;
-		/* Let Rate Mechanism to degrade tx rate directly. */
-		priv->TryDownCountLowData += TryDownTh;
-	} else if (priv->CurrentOperaRate == 108) {
-		/* 2For 54Mbps */
-		/* Air Link */
-		if ((CurrRetryRate > 26) && (priv->LastRetryRate > 25)) {
-			bTryDown = true;
-		}
-		/* Cable Link */
-		else if ((CurrRetryRate > 17) && (priv->LastRetryRate > 16) && (CurrSignalStrength > -72)) {
-			bTryDown = true;
-		}
-
-		if (bTryDown && (CurrSignalStrength < -75)) /* cable link */
-			priv->TryDownCountLowData += TryDownTh;
-	} else if (priv->CurrentOperaRate == 96) {
-		/* 2For 48Mbps */
-		/* Air Link */
-		if (((CurrRetryRate > 48) && (priv->LastRetryRate > 47))) {
-			bTryDown = true;
-		} else if (((CurrRetryRate > 21) && (priv->LastRetryRate > 20)) && (CurrSignalStrength > -74)) { /* Cable Link */
-			/* Down to rate 36Mbps. */
-			bTryDown = true;
-		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
-			bTryDown = true;
-			priv->TryDownCountLowData += TryDownTh;
-		} else if ((CurrRetryRate < 8) && (priv->LastRetryRate < 8)) { /* TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-
-		if (bTryDown && (CurrSignalStrength < -75)) {
-			priv->TryDownCountLowData += TryDownTh;
-		}
-	} else if (priv->CurrentOperaRate == 72) {
-		/* 2For 36Mbps */
-		if ((CurrRetryRate > 43) && (priv->LastRetryRate > 41)) {
-			/* Down to rate 24Mbps. */
-			bTryDown = true;
-		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
-			bTryDown = true;
-			priv->TryDownCountLowData += TryDownTh;
-		} else if ((CurrRetryRate < 15) &&  (priv->LastRetryRate < 16)) { /* TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-
-		if (bTryDown && (CurrSignalStrength < -80))
-			priv->TryDownCountLowData += TryDownTh;
-
-	} else if (priv->CurrentOperaRate == 48) {
-		/* 2For 24Mbps */
-		/* Air Link */
-		if (((CurrRetryRate > 63) && (priv->LastRetryRate > 62))) {
-			bTryDown = true;
-		} else if (((CurrRetryRate > 33) && (priv->LastRetryRate > 32)) && (CurrSignalStrength > -82)) { /* Cable Link */
-			bTryDown = true;
-		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
-			bTryDown = true;
-			priv->TryDownCountLowData += TryDownTh;
-		} else if ((CurrRetryRate < 20) && (priv->LastRetryRate < 21)) { /* TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-
-		if (bTryDown && (CurrSignalStrength < -82))
-			priv->TryDownCountLowData += TryDownTh;
-
-	} else if (priv->CurrentOperaRate == 36) {
-		if (((CurrRetryRate > 85) && (priv->LastRetryRate > 86))) {
-			bTryDown = true;
-		} else if ((CurrRetryRate > (priv->LastRetryRate + 50)) && (priv->FailTxRateCount > 2)) {
-			bTryDown = true;
-			priv->TryDownCountLowData += TryDownTh;
-		} else if ((CurrRetryRate < 22) && (priv->LastRetryRate < 23)) { /* TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-	} else if (priv->CurrentOperaRate == 22) {
-		/* 2For 11Mbps */
-		if (CurrRetryRate > 95) {
-			bTryDown = true;
-		} else if ((CurrRetryRate < 29) && (priv->LastRetryRate < 30)) { /*TO DO: need to consider (RSSI) */
-			bTryUp = true;
-		}
-	} else if (priv->CurrentOperaRate == 11) {
-		/* 2For 5.5Mbps */
-		if (CurrRetryRate > 149) {
-			bTryDown = true;
-		} else if ((CurrRetryRate < 60) && (priv->LastRetryRate < 65)) {
-			bTryUp = true;
-		}
-	} else if (priv->CurrentOperaRate == 4) {
-		/* 2For 2 Mbps */
-		if ((CurrRetryRate > 99) && (priv->LastRetryRate > 99)) {
-			bTryDown = true;
-		} else if ((CurrRetryRate < 65) && (priv->LastRetryRate < 70)) {
-			bTryUp = true;
-		}
-	} else if (priv->CurrentOperaRate == 2) {
-		/* 2For 1 Mbps */
-		if ((CurrRetryRate < 70) && (priv->LastRetryRate < 75)) {
-			bTryUp = true;
-		}
-	}
-
-	if (bTryUp && bTryDown)
-		printk("StaRateAdaptive87B(): Tx Rate tried upping and downing simultaneously!\n");
-
-	/* 1 Test Upgrading Tx Rate
-	 * Sometimes the cause of the low throughput (high retry rate) is the compatibility between the AP and NIC.
-	 * To test if the upper rate may cause lower retry rate, this mechanism randomly occurs to test upgrading tx rate.
-	 */
-	if (!bTryUp && !bTryDown && (priv->TryupingCount == 0) && (priv->TryDownCountLowData == 0)
-		&& priv->CurrentOperaRate != priv->ieee80211->current_network.HighestOperaRate && priv->FailTxRateCount < 2) {
-		if (jiffies % (CurrRetryRate + 101) == 0) {
-			bTryUp = true;
-			priv->bTryuping = true;
-		}
-	}
-
-	/* 1 Rate Mechanism */
-	if (bTryUp) {
-		priv->TryupingCount++;
-		priv->TryDownCountLowData = 0;
-
-		/*
-		 * Check more times if we need to upgrade indeed.
-		 * Because the largest value of pHalData->TryupingCount is 0xFFFF and
-		 * the largest value of pHalData->FailTxRateCount is 0x14,
-		 * this condition will be satisfied at most every 2 min.
-		 */
-
-		if ((priv->TryupingCount > (TryUpTh + priv->FailTxRateCount * priv->FailTxRateCount)) ||
-			(CurrSignalStrength > priv->LastFailTxRateSS) || priv->bTryuping) {
-			priv->TryupingCount = 0;
-			/*
-			 * When transferring from CCK to OFDM, DIG is an important issue.
-			 */
-			if (priv->CurrentOperaRate == 22)
-				bUpdateInitialGain = true;
-
-			/*
-			 * The difference in throughput between 48Mbps and 36Mbps is 8M.
-			 * So, we must be careful in this rate scale. Isaiah 2008-02-15.
-			 */
-			if (((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&
-				(priv->FailTxRateCount > 2))
-				priv->RateAdaptivePeriod = (RATE_ADAPTIVE_TIMER_PERIOD / 2);
-
-			/* (1)To avoid upgrade frequently to the fail tx rate, add the FailTxRateCount into the threshold. */
-			/* (2)If the signal strength is increased, it may be able to upgrade. */
-
-			priv->CurrentOperaRate = GetUpgradeTxRate(dev, priv->CurrentOperaRate);
-
-			if (priv->CurrentOperaRate == 36) {
-				priv->bUpdateARFR = true;
-				write_nic_word(dev, ARFR, 0x0F8F); /* bypass 12/9/6 */
-			} else if (priv->bUpdateARFR) {
-				priv->bUpdateARFR = false;
-				write_nic_word(dev, ARFR, 0x0FFF); /* set 1M ~ 54Mbps. */
-			}
-
-			/* Update Fail Tx rate and count. */
-			if (priv->LastFailTxRate != priv->CurrentOperaRate) {
-				priv->LastFailTxRate = priv->CurrentOperaRate;
-				priv->FailTxRateCount = 0;
-				priv->LastFailTxRateSS = -200; /* Set lowest power. */
-			}
-		}
-	} else {
-		if (priv->TryupingCount > 0)
-			priv->TryupingCount--;
-	}
-
-	if (bTryDown) {
-		priv->TryDownCountLowData++;
-		priv->TryupingCount = 0;
-
-		/* Check if Tx rate can be degraded or Test trying upgrading should fallback. */
-		if (priv->TryDownCountLowData > TryDownTh || priv->bTryuping) {
-			priv->TryDownCountLowData = 0;
-			priv->bTryuping = false;
-			/* Update fail information. */
-			if (priv->LastFailTxRate == priv->CurrentOperaRate) {
-				priv->FailTxRateCount++;
-				/* Record the Tx fail rate signal strength. */
-				if (CurrSignalStrength > priv->LastFailTxRateSS)
-					priv->LastFailTxRateSS = CurrSignalStrength;
-			} else {
-				priv->LastFailTxRate = priv->CurrentOperaRate;
-				priv->FailTxRateCount = 1;
-				priv->LastFailTxRateSS = CurrSignalStrength;
-			}
-			priv->CurrentOperaRate = GetDegradeTxRate(dev, priv->CurrentOperaRate);
-
-			/* Reduce chariot training time at weak signal strength situation. SD3 ED demand. */
-			if ((CurrSignalStrength < -80) && (priv->CurrentOperaRate > 72)) {
-				priv->CurrentOperaRate = 72;
-			}
-
-			if (priv->CurrentOperaRate == 36) {
-				priv->bUpdateARFR = true;
-				write_nic_word(dev, ARFR, 0x0F8F); /* bypass 12/9/6 */
-			} else if (priv->bUpdateARFR) {
-				priv->bUpdateARFR = false;
-				write_nic_word(dev, ARFR, 0x0FFF); /* set 1M ~ 54Mbps. */
-			}
-
-			/*
-			 * When it is CCK rate, it may need to update initial gain to receive lower power packets.
-			 */
-			if (MgntIsCckRate(priv->CurrentOperaRate)) {
-				bUpdateInitialGain = true;
-			}
-		}
-	} else {
-		if (priv->TryDownCountLowData > 0)
-			priv->TryDownCountLowData--;
-	}
-
-	/*
-	 * Keep the Tx fail rate count to equal to 0x15 at most.
-	 * Reduce the fail count at least to 10 sec if tx rate is tending stable.
-	 */
-	if (priv->FailTxRateCount >= 0x15 ||
-		(!bTryUp && !bTryDown && priv->TryDownCountLowData == 0 && priv->TryupingCount && priv->FailTxRateCount > 0x6)) {
-		priv->FailTxRateCount--;
-	}
-
-
-	OfdmTxPwrIdx  = priv->chtxpwr_ofdm[priv->ieee80211->current_network.channel];
-	CckTxPwrIdx  = priv->chtxpwr[priv->ieee80211->current_network.channel];
-
-	/* Mac0x9e increase 2 level in 36M~18M situation */
-	if ((priv->CurrentOperaRate < 96) && (priv->CurrentOperaRate > 22)) {
-		u1bCck = read_nic_byte(dev, CCK_TXAGC);
-		u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);
-
-		/* case 1: Never enter High power */
-		if (u1bCck == CckTxPwrIdx) {
-			if (u1bOfdm != (OfdmTxPwrIdx + 2)) {
-			priv->bEnhanceTxPwr = true;
-			u1bOfdm = ((u1bOfdm + 2) > 35) ? 35 : (u1bOfdm + 2);
-			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
-			}
-		} else if (u1bCck < CckTxPwrIdx) {
-		/* case 2: enter high power */
-			if (!priv->bEnhanceTxPwr) {
-				priv->bEnhanceTxPwr = true;
-				u1bOfdm = ((u1bOfdm + 2) > 35) ? 35 : (u1bOfdm + 2);
-				write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
-			}
-		}
-	} else if (priv->bEnhanceTxPwr) {  /* 54/48/11/5.5/2/1 */
-		u1bCck = read_nic_byte(dev, CCK_TXAGC);
-		u1bOfdm = read_nic_byte(dev, OFDM_TXAGC);
-
-		/* case 1: Never enter High power */
-		if (u1bCck == CckTxPwrIdx) {
-			priv->bEnhanceTxPwr = false;
-			write_nic_byte(dev, OFDM_TXAGC, OfdmTxPwrIdx);
-		}
-		/* case 2: enter high power */
-		else if (u1bCck < CckTxPwrIdx) {
-			priv->bEnhanceTxPwr = false;
-			u1bOfdm = ((u1bOfdm - 2) > 0) ? (u1bOfdm - 2) : 0;
-			write_nic_byte(dev, OFDM_TXAGC, u1bOfdm);
-		}
-	}
-
-	/*
-	 * We need update initial gain when we set tx rate "from OFDM to CCK" or
-	 * "from CCK to OFDM".
-	 */
-SetInitialGain:
-	if (bUpdateInitialGain) {
-		if (MgntIsCckRate(priv->CurrentOperaRate)) { /* CCK */
-			if (priv->InitialGain > priv->RegBModeGainStage) {
-				priv->InitialGainBackUp = priv->InitialGain;
-
-				if (CurrSignalStrength < -85) /* Low power, OFDM [0x17] = 26. */
-					/* SD3 SYs suggest that CurrSignalStrength < -65, ofdm 0x17=26. */
-					priv->InitialGain = priv->RegBModeGainStage;
-
-				else if (priv->InitialGain > priv->RegBModeGainStage + 1)
-					priv->InitialGain -= 2;
-
-				else
-					priv->InitialGain--;
-
-				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n", priv->InitialGain, priv->CurrentOperaRate);
-				UpdateInitialGain(dev);
-			}
-		} else { /* OFDM */
-			if (priv->InitialGain < 4) {
-				priv->InitialGainBackUp = priv->InitialGain;
-
-				priv->InitialGain++;
-				printk("StaRateAdaptive87SE(): update init_gain to index %d for date rate %d\n", priv->InitialGain, priv->CurrentOperaRate);
-				UpdateInitialGain(dev);
-			}
-		}
-	}
-
-	/* Record the related info */
-	priv->LastRetryRate = CurrRetryRate;
-	priv->LastTxThroughput = TxThroughput;
-	priv->ieee80211->rate = priv->CurrentOperaRate * 5;
-}
-
-void rtl8180_rate_adapter(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, rate_adapter_wq);
-	struct net_device *dev = ieee->dev;
-	StaRateAdaptive87SE(dev);
-}
-void timer_rate_adaptive(unsigned long data)
-{
-	struct r8180_priv *priv = ieee80211_priv((struct net_device *)data);
-	if (!priv->up) {
-		return;
-	}
-	if ((priv->ieee80211->iw_mode != IW_MODE_MASTER)
-			&& (priv->ieee80211->state == IEEE80211_LINKED) &&
-			(priv->ForcedDataRate == 0)) {
-		queue_work(priv->ieee80211->wq, (void *)&priv->ieee80211->rate_adapter_wq);
-	}
-	priv->rateadapter_timer.expires = jiffies + MSECS(priv->RateAdaptivePeriod);
-	add_timer(&priv->rateadapter_timer);
-}
-
-void SwAntennaDiversityRxOk8185(struct net_device *dev, u8 SignalStrength)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	priv->AdRxOkCnt++;
-
-	if (priv->AdRxSignalStrength != -1) {
-		priv->AdRxSignalStrength = ((priv->AdRxSignalStrength * 7) + (SignalStrength * 3)) / 10;
-	} else { /* Initialization case. */
-		priv->AdRxSignalStrength = SignalStrength;
-	}
-
-	if (priv->LastRxPktAntenna) /* Main antenna. */
-		priv->AdMainAntennaRxOkCnt++;
-	else	 /* Aux antenna. */
-		priv->AdAuxAntennaRxOkCnt++;
-}
- /*	Change Antenna Switch. */
-bool SetAntenna8185(struct net_device *dev, u8 u1bAntennaIndex)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool bAntennaSwitched = false;
-
-	switch (u1bAntennaIndex) {
-	case 0:
-		/* Mac register, main antenna */
-		write_nic_byte(dev, ANTSEL, 0x03);
-		/* base band */
-		write_phy_cck(dev, 0x11, 0x9b); /* Config CCK RX antenna. */
-		write_phy_ofdm(dev, 0x0d, 0x5c); /* Config OFDM RX antenna. */
-
-		bAntennaSwitched = true;
-		break;
-
-	case 1:
-		/* Mac register, aux antenna */
-		write_nic_byte(dev, ANTSEL, 0x00);
-		/* base band */
-		write_phy_cck(dev, 0x11, 0xbb); /* Config CCK RX antenna. */
-		write_phy_ofdm(dev, 0x0d, 0x54); /* Config OFDM RX antenna. */
-
-		bAntennaSwitched = true;
-
-		break;
-
-	default:
-		printk("SetAntenna8185: unknown u1bAntennaIndex(%d)\n", u1bAntennaIndex);
-		break;
-	}
-
-	if (bAntennaSwitched)
-		priv->CurrAntennaIndex = u1bAntennaIndex;
-
-	return bAntennaSwitched;
-}
- /*	Toggle Antenna switch. */
-bool SwitchAntenna(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	bool		bResult;
-
-	if (priv->CurrAntennaIndex == 0) {
-		bResult = SetAntenna8185(dev, 1);
-	} else {
-		bResult = SetAntenna8185(dev, 0);
-	}
-
-	return bResult;
-}
-/*
- * Engine of SW Antenna Diversity mechanism.
- * Since 8187 has no Tx part information,
- * this implementation is only dependend on Rx part information.
- */
-void SwAntennaDiversity(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool   bSwCheckSS = false;
-	if (bSwCheckSS) {
-		priv->AdTickCount++;
-
-		printk("(1) AdTickCount: %d, AdCheckPeriod: %d\n",
-			priv->AdTickCount, priv->AdCheckPeriod);
-		printk("(2) AdRxSignalStrength: %ld, AdRxSsThreshold: %ld\n",
-			priv->AdRxSignalStrength, priv->AdRxSsThreshold);
-	}
-
-	/* Case 1. No Link. */
-	if (priv->ieee80211->state != IEEE80211_LINKED) {
-		priv->bAdSwitchedChecking = false;
-		/* I switch antenna here to prevent any one of antenna is broken before link established, 2006.04.18, by rcnjko.. */
-		SwitchAntenna(dev);
-
-	  /* Case 2. Linked but no packet receive.d */
-	} else if (priv->AdRxOkCnt == 0) {
-		priv->bAdSwitchedChecking = false;
-		SwitchAntenna(dev);
-
-	  /* Case 3. Evaluate last antenna switch action and undo it if necessary. */
-	} else if (priv->bAdSwitchedChecking == true) {
-		priv->bAdSwitchedChecking = false;
-
-		/* Adjust Rx signal strength threshold. */
-		priv->AdRxSsThreshold = (priv->AdRxSignalStrength + priv->AdRxSsBeforeSwitched) / 2;
-
-		priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?
-					priv->AdMaxRxSsThreshold : priv->AdRxSsThreshold;
-		if (priv->AdRxSignalStrength < priv->AdRxSsBeforeSwitched) {
-		/* Rx signal strength is not improved after we swtiched antenna. => Swich back. */
-			/* Increase Antenna Diversity checking period due to bad decision. */
-			priv->AdCheckPeriod *= 2;
-			/* Increase Antenna Diversity checking period. */
-			if (priv->AdCheckPeriod > priv->AdMaxCheckPeriod)
-				priv->AdCheckPeriod = priv->AdMaxCheckPeriod;
-
-			/* Wrong decision => switch back. */
-			SwitchAntenna(dev);
-		} else {
-		/* Rx Signal Strength is improved. */
-
-			/* Reset Antenna Diversity checking period to its min value. */
-			priv->AdCheckPeriod = priv->AdMinCheckPeriod;
-		}
-
-	}
-	/* Case 4. Evaluate if we shall switch antenna now. */
-	/* Cause Table Speed is very fast in TRC Dell Lab, we check it every time. */
-	else {
-		priv->AdTickCount = 0;
-
-		/*
-		 * <Roger_Notes> We evaluate RxOk counts for each antenna first and than
-		 * evaluate signal strength.
-		 * The following operation can overcome the disability of CCA on both two antennas
-		 * When signal strength was extremely low or high.
-		 * 2008.01.30.
-		 */
-
-		/*
-		 * Evaluate RxOk count from each antenna if we shall switch default antenna now.
-		 */
-		if ((priv->AdMainAntennaRxOkCnt < priv->AdAuxAntennaRxOkCnt)
-			&& (priv->CurrAntennaIndex == 0)) {
-		/* We set Main antenna as default but RxOk count was less than Aux ones. */
-
-			/* Switch to Aux antenna. */
-			SwitchAntenna(dev);
-			priv->bHWAdSwitched = true;
-		} else if ((priv->AdAuxAntennaRxOkCnt < priv->AdMainAntennaRxOkCnt)
-			&& (priv->CurrAntennaIndex == 1)) {
-		/* We set Aux antenna as default but RxOk count was less than Main ones. */
-
-			/* Switch to Main antenna. */
-			SwitchAntenna(dev);
-			priv->bHWAdSwitched = true;
-		} else {
-		/* Default antenna is better. */
-
-			/* Still need to check current signal strength. */
-			priv->bHWAdSwitched = false;
-		}
-		/*
-		 * <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna
-		 * didn't change by HW evaluation.
-		 * 2008.02.27.
-		 *
-		 * [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05
-		 * For example, Throughput of aux is better than main antenna(about 10M v.s 2M),
-		 * but AdRxSignalStrength is less than main.
-		 * Our guess is that main antenna have lower throughput and get many change
-		 * to receive more CCK packets(ex.Beacon) which have stronger SignalStrength.
-		 */
-		if ((!priv->bHWAdSwitched) && (bSwCheckSS)) {
-			/* Evaluate Rx signal strength if we shall switch antenna now. */
-			if (priv->AdRxSignalStrength < priv->AdRxSsThreshold) {
-			/* Rx signal strength is weak => Switch Antenna. */
-				priv->AdRxSsBeforeSwitched = priv->AdRxSignalStrength;
-				priv->bAdSwitchedChecking = true;
-
-				SwitchAntenna(dev);
-			} else {
-			/* Rx signal strength is OK. */
-				priv->bAdSwitchedChecking = false;
-				/* Increase Rx signal strength threshold if necessary. */
-				if ((priv->AdRxSignalStrength > (priv->AdRxSsThreshold + 10)) && /* Signal is much stronger than current threshold */
-					priv->AdRxSsThreshold <= priv->AdMaxRxSsThreshold) { /* Current threhold is not yet reach upper limit. */
-
-					priv->AdRxSsThreshold = (priv->AdRxSsThreshold + priv->AdRxSignalStrength) / 2;
-					priv->AdRxSsThreshold = (priv->AdRxSsThreshold > priv->AdMaxRxSsThreshold) ?
-								priv->AdMaxRxSsThreshold : priv->AdRxSsThreshold;/* +by amy 080312 */
-				}
-
-				/* Reduce Antenna Diversity checking period if possible. */
-				if (priv->AdCheckPeriod > priv->AdMinCheckPeriod)
-					priv->AdCheckPeriod /= 2;
-			}
-		}
-	}
-	/* Reset antenna diversity Rx related statistics. */
-	priv->AdRxOkCnt = 0;
-	priv->AdMainAntennaRxOkCnt = 0;
-	priv->AdAuxAntennaRxOkCnt = 0;
-}
-
- /*	Return TRUE if we shall perform Tx Power Tracking Mechanism, FALSE otherwise. */
-bool CheckTxPwrTracking(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	if (!priv->bTxPowerTrack)
-		return false;
-
-	/* if 87SE is in High Power , don't do Tx Power Tracking. asked by SD3 ED. 2008-08-08 Isaiah */
-	if (priv->bToUpdateTxPwr)
-		return false;
-
-	return true;
-}
-
-
- /*	Timer callback function of SW Antenna Diversity. */
-void SwAntennaDiversityTimerCallback(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	enum rt_rf_power_state rtState;
-
-	 /* We do NOT need to switch antenna while RF is off. */
-	rtState = priv->eRFPowerState;
-	do {
-		if (rtState == RF_OFF) {
-			break;
-		} else if (rtState == RF_SLEEP) {
-			/* Don't access BB/RF under Disable PLL situation. */
-			break;
-		}
-		SwAntennaDiversity(dev);
-
-	} while (false);
-
-	if (priv->up) {
-		priv->SwAntennaDiversityTimer.expires = jiffies + MSECS(ANTENNA_DIVERSITY_TIMER_PERIOD);
-		add_timer(&priv->SwAntennaDiversityTimer);
-	}
-}
-
diff --git a/drivers/staging/rtl8187se/r8180_dm.h b/drivers/staging/rtl8187se/r8180_dm.h
deleted file mode 100644
index cb4046f346ef..000000000000
--- a/drivers/staging/rtl8187se/r8180_dm.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#ifndef R8180_DM_H
-#define R8180_DM_H
-
-#include "r8180.h"
-/* #include "r8180_hw.h"	*/
-/* #include "r8180_93cx6.h"	*/
-void SwAntennaDiversityRxOk8185(struct net_device *dev, u8 SignalStrength);
-bool SetAntenna8185(struct net_device *dev, u8 u1bAntennaIndex);
-bool SwitchAntenna(struct net_device *dev);
-void SwAntennaDiversity(struct net_device *dev);
-void SwAntennaDiversityTimerCallback(struct net_device *dev);
-bool CheckDig(struct net_device *dev);
-bool CheckHighPower(struct net_device *dev);
-void rtl8180_hw_dig_wq(struct work_struct *work);
-void rtl8180_tx_pw_wq(struct work_struct *work);
-void rtl8180_rate_adapter(struct work_struct *work);
-void TxPwrTracking87SE(struct net_device *dev);
-bool CheckTxPwrTracking(struct net_device *dev);
-void rtl8180_rate_adapter(struct work_struct *work);
-void timer_rate_adaptive(unsigned long data);
-
-
-#endif
diff --git a/drivers/staging/rtl8187se/r8180_hw.h b/drivers/staging/rtl8187se/r8180_hw.h
deleted file mode 100644
index e59d74f8ecfc..000000000000
--- a/drivers/staging/rtl8187se/r8180_hw.h
+++ /dev/null
@@ -1,588 +0,0 @@
-/*
-	This is part of rtl8180 OpenSource driver.
-	Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
-	Released under the terms of GPL (General Public Licence)
-
-	Parts of this driver are based on the GPL part of the
-	official Realtek driver.
-	Parts of this driver are based on the rtl8180 driver skeleton
-	from Patric Schenke & Andres Salomon.
-	Parts of this driver are based on the Intel Pro Wireless
-	2100 GPL driver.
-
-	We want to tanks the Authors of those projects
-	and the Ndiswrapper project Authors.
-*/
-
-/* Mariusz Matuszek added full registers definition with Realtek's name */
-
-/* this file contains register definitions for the rtl8180 MAC controller */
-#ifndef R8180_HW
-#define R8180_HW
-
-
-#define BIT0	0x00000001
-#define BIT1	0x00000002
-#define BIT2	0x00000004
-#define BIT3	0x00000008
-#define BIT4	0x00000010
-#define BIT5	0x00000020
-#define BIT6	0x00000040
-#define BIT7	0x00000080
-#define BIT9	0x00000200
-#define BIT11	0x00000800
-#define BIT13	0x00002000
-#define BIT15	0x00008000
-#define BIT20	0x00100000
-#define BIT21	0x00200000
-#define BIT22	0x00400000
-#define BIT23	0x00800000
-#define BIT24	0x01000000
-#define BIT25	0x02000000
-#define BIT26	0x04000000
-#define BIT27	0x08000000
-#define BIT28	0x10000000
-#define BIT29	0x20000000
-#define BIT30	0x40000000
-#define BIT31	0x80000000
-
-#define MAX_SLEEP_TIME (10000)
-#define MIN_SLEEP_TIME (50)
-
-#define BB_HOST_BANG_EN (1<<2)
-#define BB_HOST_BANG_CLK (1<<1)
-
-#define MAC0 0
-#define MAC4 4
-
-#define CMD 0x37
-#define CMD_RST_SHIFT 4
-#define CMD_RX_ENABLE_SHIFT 3
-#define CMD_TX_ENABLE_SHIFT 2
-
-#define EPROM_CMD 0x50
-#define EPROM_CMD_RESERVED_MASK ((1<<5)|(1<<4))
-#define EPROM_CMD_OPERATING_MODE_SHIFT 6
-#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
-#define EPROM_CMD_CONFIG 0x3
-#define EPROM_CMD_NORMAL 0
-#define EPROM_CMD_LOAD 1
-#define EPROM_CMD_PROGRAM 2
-#define EPROM_CS_SHIFT 3
-#define EPROM_CK_SHIFT 2
-#define EPROM_W_SHIFT 1
-#define EPROM_R_SHIFT 0
-#define CONFIG2_DMA_POLLING_MODE_SHIFT 3
-
-#define INTA_TXOVERFLOW (1<<15)
-#define INTA_TIMEOUT (1<<14)
-#define INTA_HIPRIORITYDESCERR (1<<9)
-#define INTA_HIPRIORITYDESCOK (1<<8)
-#define INTA_NORMPRIORITYDESCERR (1<<7)
-#define INTA_NORMPRIORITYDESCOK (1<<6)
-#define INTA_RXOVERFLOW (1<<5)
-#define INTA_RXDESCERR (1<<4)
-#define INTA_LOWPRIORITYDESCERR (1<<3)
-#define INTA_LOWPRIORITYDESCOK (1<<2)
-#define INTA_RXOK (1)
-#define INTA_MASK 0x3c
-
-#define RXRING_ADDR 0xe4 /* page 0 */
-#define PGSELECT 0x5e
-#define PGSELECT_PG_SHIFT 0
-#define RX_CONF 0x44
-#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
-(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
-#define RX_CHECK_BSSID_SHIFT 23
-#define ACCEPT_PWR_FRAME_SHIFT 22
-#define ACCEPT_MNG_FRAME_SHIFT 20
-#define ACCEPT_CTL_FRAME_SHIFT 19
-#define ACCEPT_DATA_FRAME_SHIFT 18
-#define ACCEPT_ICVERR_FRAME_SHIFT 12
-#define ACCEPT_CRCERR_FRAME_SHIFT 5
-#define ACCEPT_BCAST_FRAME_SHIFT 3
-#define ACCEPT_MCAST_FRAME_SHIFT 2
-#define ACCEPT_ALLMAC_FRAME_SHIFT 0
-#define ACCEPT_NICMAC_FRAME_SHIFT 1
-
-#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
-#define RX_FIFO_THRESHOLD_SHIFT 13
-#define RX_FIFO_THRESHOLD_NONE 7
-#define RX_AUTORESETPHY_SHIFT 28
-
-#define TX_CONF 0x40
-#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30
-#define TX_LOOPBACK_SHIFT 17
-#define TX_LOOPBACK_NONE 0
-#define TX_LOOPBACK_CONTINUE 3
-#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))
-#define TX_DPRETRY_SHIFT 0
-#define R8180_MAX_RETRY 255
-#define TX_RTSRETRY_SHIFT 8
-#define TX_NOICV_SHIFT 19
-#define TX_NOCRC_SHIFT 16
-#define TX_DMA_POLLING 0xd9
-#define TX_DMA_POLLING_BEACON_SHIFT 7
-#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6
-#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5
-#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4
-#define TX_MANAGEPRIORITY_RING_ADDR 0x0C
-#define TX_BKPRIORITY_RING_ADDR 0x10
-#define TX_BEPRIORITY_RING_ADDR 0x14
-#define TX_VIPRIORITY_RING_ADDR 0x20
-#define TX_VOPRIORITY_RING_ADDR 0x24
-#define TX_HIGHPRIORITY_RING_ADDR 0x28
-#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
-#define MAX_RX_DMA_2048 7
-#define MAX_RX_DMA_1024	6
-#define MAX_RX_DMA_SHIFT 10
-#define INT_TIMEOUT 0x48
-#define CONFIG3_CLKRUN_SHIFT 2
-#define CONFIG3_ANAPARAM_W_SHIFT 6
-#define ANAPARAM 0x54
-#define BEACON_INTERVAL 0x70
-#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \
-(1<<6)|(1<<7)|(1<<8)|(1<<9))
-#define ATIM_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7)| \
-(1<<8)|(1<<9))
-#define ATIM 0x72
-#define EPROM_CS_SHIFT 3
-#define EPROM_CK_SHIFT 2
-#define PHY_ADR 0x7c
-#define SECURITY 0x5f /* 1209 this is sth wrong */
-#define SECURITY_WEP_TX_ENABLE_SHIFT 1
-#define SECURITY_WEP_RX_ENABLE_SHIFT 0
-#define SECURITY_ENCRYP_104 1
-#define SECURITY_ENCRYP_SHIFT 4
-#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))
-#define KEY0 0x90  /* 1209 this is sth wrong */
-#define CONFIG2_ANTENNA_SHIFT 6
-#define TX_BEACON_RING_ADDR 0x4c
-#define CONFIG0_WEP40_SHIFT 7
-#define CONFIG0_WEP104_SHIFT 6
-#define AGCRESET_SHIFT 5
-
-
-
-/*
- * Operational registers offsets in PCI (I/O) space.
- * RealTek names are used.
- */
-
-#define TSFTR 0x0018
-
-#define TLPDA 0x0020
-
-#define BSSID 0x002E
-
-#define CR 0x0037
-
-#define RF_SW_CONFIG	        0x8			/* store data which is transmitted to RF for driver	*/
-#define RF_SW_CFG_SI		BIT1
-#define EIFS			0x2D			/* Extended InterFrame Space Timer, in unit of 4 us.	*/
-
-#define BRSR			0x34			/* Basic rate set										*/
-
-#define IMR 0x006C
-#define ISR 0x003C
-
-#define TCR 0x0040
-
-#define RCR 0x0044
-
-#define TimerInt 0x0048
-
-#define CR9346 0x0050
-
-#define CONFIG0 0x0051
-#define CONFIG2 0x0053
-
-#define MSR 0x0058
-
-#define CONFIG3 0x0059
-#define CONFIG4 0x005A
-	/* SD3 szuyitasi: Mac0x57= CC -> B0 Mac0x60= D1 -> C6	*/
-	/* Mac0x60 = 0x000004C6 power save parameters			*/
-	#define ANAPARM_ASIC_ON    0xB0054D00
-	#define ANAPARM2_ASIC_ON  0x000004C6
-
-	#define ANAPARM_ON ANAPARM_ASIC_ON
-	#define ANAPARM2_ON ANAPARM2_ASIC_ON
-
-#define TESTR 0x005B
-
-#define PSR 0x005E
-
-#define BcnItv 0x0070
-
-#define AtimWnd 0x0072
-
-#define BintrItv 0x0074
-
-#define PhyAddr 0x007C
-#define PhyDataR 0x007E
-
-/* following are for rtl8185 */
-#define RFPinsOutput 0x80
-#define RFPinsEnable 0x82
-#define RF_TIMING 0x8c
-#define RFPinsSelect 0x84
-#define ANAPARAM2 0x60
-#define RF_PARA 0x88
-#define RFPinsInput 0x86
-#define GP_ENABLE 0x90
-#define GPIO 0x91
-#define SW_CONTROL_GPIO 0x400
-#define TX_ANTENNA 0x9f
-#define TX_GAIN_OFDM 0x9e
-#define TX_GAIN_CCK 0x9d
-#define WPA_CONFIG 0xb0
-#define TX_AGC_CTL 0x9c
-#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0
-#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1
-#define TX_AGC_CTL_FEEDBACK_ANT 2
-#define RESP_RATE 0x34
-#define SIFS 0xb4
-#define DIFS 0xb5
-
-#define SLOT 0xb6
-#define CW_CONF 0xbc
-#define CW_CONF_PERPACKET_RETRY_SHIFT 1
-#define CW_CONF_PERPACKET_CW_SHIFT 0
-#define CW_VAL 0xbd
-#define MAX_RESP_RATE_SHIFT 4
-#define MIN_RESP_RATE_SHIFT 0
-#define RATE_FALLBACK 0xbe
-
-#define CONFIG5 0x00D8
-
-#define PHYPR			0xDA			/* 0xDA - 0x0B PHY Parameter Register.	*/
-
-#define FEMR			0x1D4	/* Function Event Mask register	*/
-
-#define FFER 0x00FC
-#define FFER_END 0x00FF
-
-
-
-/*
- * Bitmasks for specific register functions.
- * Names are derived from the register name and function name.
- *
- * <REGISTER>_<FUNCTION>[<bit>]
- *
- * this leads to some awkward names...
- */
-
-#define BRSR_BPLCP  ((1 << 8))
-#define BRSR_MBR    ((1 << 1)|(1 << 0))
-#define BRSR_MBR_8185 ((1 << 11)|(1 << 10)|(1 << 9)|(1 << 8)|(1 << 7)|(1 << 6)|(1 << 5)|(1 << 4)|(1 << 3)|(1 << 2)|(1 << 1)|(1 << 0))
-#define BRSR_MBR0   ((1 << 0))
-#define BRSR_MBR1   ((1 << 1))
-
-#define CR_RST      ((1 << 4))
-#define CR_RE       ((1 << 3))
-#define CR_TE       ((1 << 2))
-#define CR_MulRW    ((1 << 0))
-
-#define IMR_Dot11hInt	((1 << 25))			/*802.11h Measurement Interrupt					*/
-#define IMR_BcnDmaInt	((1 << 24))			/*Beacon DMA Interrupt */ /*What differenct between BcnDmaInt and BcnInt???	*/
-#define IMR_WakeInt		((1 << 23))			/*Wake Up Interrupt								*/
-#define IMR_TXFOVW		((1 << 22))			/*Tx FIFO Overflow Interrupt					*/
-#define IMR_TimeOut1	((1 << 21))			/*Time Out Interrupt 1							*/
-#define IMR_BcnInt		((1 << 20))			/*Beacon Time out Interrupt						*/
-#define IMR_ATIMInt		((1 << 19))			/*ATIM Time Out Interrupt						*/
-#define IMR_TBDER		((1 << 18))			/*Tx Beacon Descriptor Error Interrupt			*/
-#define IMR_TBDOK		((1 << 17))			/*Tx Beacon Descriptor OK Interrupt				*/
-#define IMR_THPDER		((1 << 16))			/*Tx High Priority Descriptor Error Interrupt	*/
-#define IMR_THPDOK		((1 << 15))			/*Tx High Priority Descriptor OK Interrupt		*/
-#define IMR_TVODER		((1 << 14))			/*Tx AC_VO Descriptor Error Interrupt			*/
-#define IMR_TVODOK		((1 << 13))			/*Tx AC_VO Descriptor OK Interrupt				*/
-#define IMR_FOVW		((1 << 12))			/*Rx FIFO Overflow Interrupt					*/
-#define IMR_RDU			((1 << 11))			/*Rx Descriptor Unavailable Interrupt			*/
-#define IMR_TVIDER		((1 << 10))			/*Tx AC_VI Descriptor Error Interrupt			*/
-#define IMR_TVIDOK		((1 << 9))			/*Tx AC_VI Descriptor OK Interrupt				*/
-#define IMR_RER			((1 << 8))			/*Rx Error Interrupt							*/
-#define IMR_ROK			((1 << 7))			/*Receive OK Interrupt							*/
-#define IMR_TBEDER		((1 << 6))			/*Tx AC_BE Descriptor Error Interrupt			*/
-#define IMR_TBEDOK		((1 << 5))			/*Tx AC_BE Descriptor OK Interrupt				*/
-#define IMR_TBKDER		((1 << 4))			/*Tx AC_BK Descriptor Error Interrupt			*/
-#define IMR_TBKDOK		((1 << 3))			/*Tx AC_BK Descriptor OK Interrupt				*/
-#define IMR_RQoSOK		((1 << 2))			/*Rx QoS OK Interrupt							*/
-#define IMR_TimeOut2	((1 << 1))			/*Time Out Interrupt 2							*/
-#define IMR_TimeOut3	((1 << 0))			/*Time Out Interrupt 3							*/
-#define IMR_TMGDOK      ((1 << 30))
-#define ISR_Dot11hInt	((1 << 25))			/*802.11h Measurement Interrupt					*/
-#define ISR_BcnDmaInt	((1 << 24))			/*Beacon DMA Interrupt	*/ /*What differenct between BcnDmaInt and BcnInt???	*/
-#define ISR_WakeInt		((1 << 23))			/*Wake Up Interrupt								*/
-#define ISR_TXFOVW		((1 << 22))			/*Tx FIFO Overflow Interrupt					*/
-#define ISR_TimeOut1	((1 << 21))			/*Time Out Interrupt 1							*/
-#define ISR_BcnInt		((1 << 20))			/*Beacon Time out Interrupt						*/
-#define ISR_ATIMInt		((1 << 19))			/*ATIM Time Out Interrupt						*/
-#define ISR_TBDER		((1 << 18))			/*Tx Beacon Descriptor Error Interrupt			*/
-#define ISR_TBDOK		((1 << 17))			/*Tx Beacon Descriptor OK Interrupt				*/
-#define ISR_THPDER		((1 << 16))			/*Tx High Priority Descriptor Error Interrupt	*/
-#define ISR_THPDOK		((1 << 15))			/*Tx High Priority Descriptor OK Interrupt		*/
-#define ISR_TVODER		((1 << 14))			/*Tx AC_VO Descriptor Error Interrupt			*/
-#define ISR_TVODOK		((1 << 13))			/*Tx AC_VO Descriptor OK Interrupt				*/
-#define ISR_FOVW		((1 << 12))			/*Rx FIFO Overflow Interrupt					*/
-#define ISR_RDU			((1 << 11))			/*Rx Descriptor Unavailable Interrupt			*/
-#define ISR_TVIDER		((1 << 10))			/*Tx AC_VI Descriptor Error Interrupt			*/
-#define ISR_TVIDOK		((1 << 9))			/*Tx AC_VI Descriptor OK Interrupt				*/
-#define ISR_RER			((1 << 8))			/*Rx Error Interrupt							*/
-#define ISR_ROK			((1 << 7))			/*Receive OK Interrupt							*/
-#define ISR_TBEDER		((1 << 6))			/*Tx AC_BE Descriptor Error Interrupt			*/
-#define ISR_TBEDOK		((1 << 5))			/*Tx AC_BE Descriptor OK Interrupt				*/
-#define ISR_TBKDER		((1 << 4))			/*Tx AC_BK Descriptor Error Interrupt			*/
-#define ISR_TBKDOK		((1 << 3))			/*Tx AC_BK Descriptor OK Interrupt				*/
-#define ISR_RQoSOK		((1 << 2))			/*Rx QoS OK Interrupt							*/
-#define ISR_TimeOut2	((1 << 1))			/*Time Out Interrupt 2							*/
-#define ISR_TimeOut3	((1 << 0))			/*Time Out Interrupt 3							*/
-
-/* these definition is used for Tx/Rx test temporarily */
-#define ISR_TLPDER  ISR_TVIDER
-#define ISR_TLPDOK  ISR_TVIDOK
-#define ISR_TNPDER  ISR_TVODER
-#define ISR_TNPDOK  ISR_TVODOK
-#define ISR_TimeOut ISR_TimeOut1
-#define ISR_RXFOVW ISR_FOVW
-
-
-#define HW_VERID_R8180_F 3
-#define HW_VERID_R8180_ABCD 2
-#define HW_VERID_R8185_ABC 4
-#define HW_VERID_R8185_D 5
-#define HW_VERID_R8185B_B 6
-
-#define TCR_CWMIN   ((1 << 31))
-#define TCR_SWSEQ   ((1 << 30))
-#define TCR_HWVERID_MASK ((1 << 27)|(1 << 26)|(1 << 25))
-#define TCR_HWVERID_SHIFT 25
-#define TCR_SAT     ((1 << 24))
-#define TCR_PLCP_LEN TCR_SAT /* rtl8180 */
-#define TCR_MXDMA_MASK   ((1 << 23)|(1 << 22)|(1 << 21))
-#define TCR_MXDMA_1024 6
-#define TCR_MXDMA_2048 7
-#define TCR_MXDMA_SHIFT  21
-#define TCR_DISCW   ((1 << 20))
-#define TCR_ICV     ((1 << 19))
-#define TCR_LBK     ((1 << 18)|(1 << 17))
-#define TCR_LBK1    ((1 << 18))
-#define TCR_LBK0    ((1 << 17))
-#define TCR_CRC     ((1 << 16))
-#define TCR_DPRETRY_MASK   ((1 << 15)|(1 << 14)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9)|(1 << 8))
-#define TCR_RTSRETRY_MASK   ((1 << 0)|(1 << 1)|(1 << 2)|(1 << 3)|(1 << 4)|(1 << 5)|(1 << 6)|(1 << 7))
-#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 /* rtl8185 */
-
-#define RCR_ONLYERLPKT ((1 << 31))
-#define RCR_CS_SHIFT   29
-#define RCR_CS_MASK    ((1 << 30) | (1 << 29))
-#define RCR_ENMARP     ((1 << 28))
-#define RCR_CBSSID     ((1 << 23))
-#define RCR_APWRMGT    ((1 << 22))
-#define RCR_ADD3       ((1 << 21))
-#define RCR_AMF        ((1 << 20))
-#define RCR_ACF        ((1 << 19))
-#define RCR_ADF        ((1 << 18))
-#define RCR_RXFTH      ((1 << 15)|(1 << 14)|(1 << 13))
-#define RCR_RXFTH2     ((1 << 15))
-#define RCR_RXFTH1     ((1 << 14))
-#define RCR_RXFTH0     ((1 << 13))
-#define RCR_AICV       ((1 << 12))
-#define RCR_MXDMA      ((1 << 10)|(1 << 9)|(1 << 8))
-#define RCR_MXDMA2     ((1 << 10))
-#define RCR_MXDMA1     ((1 << 9))
-#define RCR_MXDMA0     ((1 << 8))
-#define RCR_9356SEL    ((1 << 6))
-#define RCR_ACRC32     ((1 << 5))
-#define RCR_AB         ((1 << 3))
-#define RCR_AM         ((1 << 2))
-#define RCR_APM        ((1 << 1))
-#define RCR_AAP        ((1 << 0))
-
-#define CR9346_EEM     ((1 << 7)|(1 << 6))
-#define CR9346_EEM1    ((1 << 7))
-#define CR9346_EEM0    ((1 << 6))
-#define CR9346_EECS    ((1 << 3))
-#define CR9346_EESK    ((1 << 2))
-#define CR9346_EED1    ((1 << 1))
-#define CR9346_EED0    ((1 << 0))
-
-#define CONFIG3_PARM_En    ((1 << 6))
-#define CONFIG3_FuncRegEn  ((1 << 1))
-
-#define CONFIG4_PWRMGT     ((1 << 5))
-
-#define MSR_LINK_MASK      ((1 << 2)|(1 << 3))
-#define MSR_LINK_MANAGED   2
-#define MSR_LINK_NONE      0
-#define MSR_LINK_SHIFT     2
-#define MSR_LINK_ADHOC     1
-#define MSR_LINK_MASTER    3
-
-#define BcnItv_BcnItv      (0x01FF)
-
-#define AtimWnd_AtimWnd    (0x01FF)
-
-#define BintrItv_BintrItv  (0x01FF)
-
-#define FEMR_INTR    ((1 << 15))
-#define FEMR_WKUP    ((1 << 14))
-#define FEMR_GWAKE   ((1 << 4))
-
-#define FFER_INTR    ((1 << 15))
-#define FFER_GWAKE   ((1 << 4))
-
-/* Three wire mode.					*/
-#define SW_THREE_WIRE			0
-#define HW_THREE_WIRE			2
-/* RTL8187S by amy					*/
-#define HW_THREE_WIRE_PI		5
-#define HW_THREE_WIRE_SI		6
-/* by amy							*/
-#define TCR_LRL_OFFSET		0
-#define TCR_SRL_OFFSET		8
-#define TCR_MXDMA_OFFSET	21
-#define TCR_DISReqQsize_OFFSET		28
-#define TCR_DurProcMode_OFFSET		30
-
-#define RCR_MXDMA_OFFSET				8
-#define RCR_FIFO_OFFSET					13
-
-#define AckTimeOutReg	0x79		/* ACK timeout register, in unit of 4 us. */
-
-#define RFTiming			0x8C
-
-#define TPPollStop		0x93
-
-#define TXAGC_CTL		0x9C			/*< RJ_TODO_8185B> TX_AGC_CONTROL (0x9C seems be removed at 8185B, see p37). */
-#define CCK_TXAGC		0x9D
-#define OFDM_TXAGC		0x9E
-#define ANTSEL			0x9F
-
-#define ACM_CONTROL             0x00BF      /* ACM Control Registe */
-
-#define	IntMig			0xE2			/* Interrupt Migration (0xE2 ~ 0xE3)	*/
-
-#define TID_AC_MAP		0xE8			/* TID to AC Mapping Register			*/
-
-#define ANAPARAM3		0xEE			/* <RJ_TODO_8185B> How to use it?		*/
-
-#define AC_VO_PARAM		0xF0			/* AC_VO Parameters Record				*/
-#define AC_VI_PARAM		0xF4			/* AC_VI Parameters Record				*/
-#define AC_BE_PARAM		0xF8			/* AC_BE Parameters Record				*/
-#define AC_BK_PARAM		0xFC			/* AC_BK Parameters Record				*/
-
-#define GPIOCtrl			0x16B			/*GPIO Control Register.			*/
-#define ARFR			0x1E0	/* Auto Rate Fallback Register (0x1e0 ~ 0x1e2)	*/
-
-#define RFSW_CTRL			0x272	/* 0x272-0x273.								*/
-#define SW_3W_DB0			0x274	/* Software 3-wire data buffer bit 31~0.		*/
-#define SW_3W_DB1			0x278	/* Software 3-wire data buffer bit 63~32.	*/
-#define SW_3W_CMD0			0x27C	/* Software 3-wire Control/Status Register.	*/
-#define SW_3W_CMD1			0x27D	/* Software 3-wire Control/Status Register.	*/
-
-#define PI_DATA_READ		0X360	/* 0x360 - 0x361  Parallel Interface Data Register.	*/
-#define SI_DATA_READ		0x362	/* 0x362 - 0x363  Serial Interface Data Register.	*/
-
-/*
-----------------------------------------------------------------------------
-		8185B TPPollStop bits					(offset 0x93, 1 byte)
-----------------------------------------------------------------------------
-*/
-#define TPPOLLSTOP_BQ			(0x01 << 7)
-#define TPPOLLSTOP_AC_VIQ		(0x01 << 4)
-
-#define MSR_LINK_ENEDCA	   (1<<4)
-
-/*
-----------------------------------------------------------------------------
-		8187B AC_XX_PARAM bits
-----------------------------------------------------------------------------
-*/
-#define AC_PARAM_TXOP_LIMIT_OFFSET		16
-#define AC_PARAM_ECW_MAX_OFFSET			12
-#define AC_PARAM_ECW_MIN_OFFSET			8
-#define AC_PARAM_AIFS_OFFSET			0
-
-/*
-----------------------------------------------------------------------------
-		8187B ACM_CONTROL bits					(Offset 0xBF, 1 Byte)
-----------------------------------------------------------------------------
-*/
-#define VOQ_ACM_EN				(0x01 << 7)	/*BIT7	*/
-#define VIQ_ACM_EN				(0x01 << 6)	/*BIT6	*/
-#define BEQ_ACM_EN				(0x01 << 5)	/*BIT5	*/
-#define ACM_HW_EN				(0x01 << 4)	/*BIT4	*/
-#define VOQ_ACM_CTL				(0x01 << 2)	/*BIT2	*/	/* Set to 1 when AC_VO used time reaches or exceeds the admitted time	*/
-#define VIQ_ACM_CTL				(0x01 << 1)	/*BIT1	*/	/* Set to 1 when AC_VI used time reaches or exceeds the admitted time	*/
-#define BEQ_ACM_CTL				(0x01 << 0)	/*BIT0	*/	/* Set to 1 when AC_BE used time reaches or exceeds the admitted time	*/
-
-
-/*
-----------------------------------------------------------------------------
-		8185B SW_3W_CMD bits					(Offset 0x27C-0x27D, 16bit)
-----------------------------------------------------------------------------
-*/
-#define SW_3W_CMD0_HOLD		((1 << 7))
-#define SW_3W_CMD1_RE		((1 << 0)) /* BIT8		*/
-#define SW_3W_CMD1_WE		((1 << 1)) /* BIT9		*/
-#define SW_3W_CMD1_DONE		((1 << 2)) /* BIT10		*/
-
-#define BB_HOST_BANG_RW		(1 << 3)
-
-/*
-----------------------------------------------------------------------------
-		8185B RATE_FALLBACK_CTL bits			(Offset 0xBE, 8bit)
-----------------------------------------------------------------------------
-*/
-#define RATE_FALLBACK_CTL_ENABLE				((1 << 7))
-#define RATE_FALLBACK_CTL_ENABLE_RTSCTS		((1 << 6))
-/* Auto rate fallback per 2^n retry. */
-#define RATE_FALLBACK_CTL_AUTO_STEP0	0x00
-#define RATE_FALLBACK_CTL_AUTO_STEP1	0x01
-#define RATE_FALLBACK_CTL_AUTO_STEP2	0x02
-#define RATE_FALLBACK_CTL_AUTO_STEP3	0x03
-
-
-#define RTL8225z2_ANAPARAM_OFF	0x55480658
-#define RTL8225z2_ANAPARAM2_OFF	0x72003f70
-/* by amy for power save		*/
-#define RF_CHANGE_BY_HW BIT30
-#define RF_CHANGE_BY_PS BIT29
-#define RF_CHANGE_BY_IPS BIT28
-/* by amy for power save		*/
-/* by amy for antenna			*/
-#define EEPROM_SW_REVD_OFFSET 0x3f
-
-/*  BIT[8-9] is for SW Antenna Diversity.
- *  Only the value EEPROM_SW_AD_ENABLE means enable, other values are disable.
- */
-#define EEPROM_SW_AD_MASK			0x0300
-#define EEPROM_SW_AD_ENABLE			0x0100
-
-/* BIT[10-11] determine if Antenna 1 is the Default Antenna.
- * Only the value EEPROM_DEF_ANT_1 means TRUE, other values are FALSE.
- */
-#define EEPROM_DEF_ANT_MASK			0x0C00
-#define EEPROM_DEF_ANT_1			0x0400
-/*by amy for antenna																				*/
-/* {by amy 080312																					*/
-/* 0x7C, 0x7D Crystal calibration and Tx Power tracking mechanism. Added by Roger. 2007.12.10.		*/
-#define EEPROM_RSV						0x7C
-#define EEPROM_XTAL_CAL_XOUT_MASK	0x0F	/* 0x7C[3:0], Crystal calibration for Xout.				*/
-#define EEPROM_XTAL_CAL_XIN_MASK		0xF0	/* 0x7C[7:4], Crystal calibration for Xin.			*/
-#define EEPROM_THERMAL_METER_MASK	0x0F00	/* 0x7D[3:0], Thermal meter reference level.			*/
-#define EEPROM_XTAL_CAL_ENABLE		0x1000	/* 0x7D[4], Crystal calibration enabled/disabled BIT.	*/
-#define EEPROM_THERMAL_METER_ENABLE	0x2000	/* 0x7D[5], Thermal meter enabled/disabled BIT.			*/
-#define EN_LPF_CAL			0x238	/* Enable LPF Calibration.										*/
-#define PWR_METER_EN		BIT1
-/* <RJ_TODO_8185B> where are false alarm counters in 8185B? */
-#define CCK_FALSE_ALARM		0xD0
-/* by amy 080312} */
-
-/* YJ,add for Country IE, 080630 */
-#define EEPROM_COUNTRY_CODE  0x2E
-/* YJ,add,080630,end */
-
-#endif
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.h b/drivers/staging/rtl8187se/r8180_rtl8225.h
deleted file mode 100644
index 7df73927b3cc..000000000000
--- a/drivers/staging/rtl8187se/r8180_rtl8225.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * This is part of the rtl8180-sa2400 driver released under the GPL (See file
- * COPYING for details).
- *
- * Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
- *
- * This files contains programming code for the rtl8225 radio frontend.
- *
- * *Many* thanks to Realtek Corp. for their great support!
- */
-
-#include "r8180.h"
-
-#define RTL8225_ANAPARAM_ON  0xa0000b59
-#define RTL8225_ANAPARAM_OFF 0xa00beb59
-#define RTL8225_ANAPARAM2_OFF 0x840dec11
-#define RTL8225_ANAPARAM2_ON  0x860dec11
-#define RTL8225_ANAPARAM_SLEEP 0xa00bab59
-#define RTL8225_ANAPARAM2_SLEEP 0x840dec11
-
-void rtl8225z2_rf_init(struct net_device *dev);
-void rtl8225z2_rf_set_chan(struct net_device *dev, short ch);
-void rtl8225z2_rf_close(struct net_device *dev);
-
-void RF_WriteReg(struct net_device *dev, u8 offset, u16 data);
-u16 RF_ReadReg(struct net_device *dev, u8 offset);
-
-void rtl8180_set_mode(struct net_device *dev, int mode);
-void rtl8180_set_mode(struct net_device *dev, int mode);
-bool SetZebraRFPowerState8185(struct net_device *dev,
-			      enum rt_rf_power_state eRFPowerState);
-void rtl8225z4_rf_sleep(struct net_device *dev);
-void rtl8225z4_rf_wakeup(struct net_device *dev);
-
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
deleted file mode 100644
index 47104fa05c55..000000000000
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ /dev/null
@@ -1,811 +0,0 @@
-/*
- * This is part of the rtl8180-sa2400 driver
- * released under the GPL (See file COPYING for details).
- * Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
- *
- * This files contains programming code for the rtl8225
- * radio frontend.
- *
- * *Many* thanks to Realtek Corp. for their great support!
- */
-
-#include "r8180_hw.h"
-#include "r8180_rtl8225.h"
-#include "r8180_93cx6.h"
-
-#include "ieee80211/dot11d.h"
-
-static void write_rtl8225(struct net_device *dev, u8 adr, u16 data)
-{
-	int i;
-	u16 out, select;
-	u8 bit;
-	u32 bangdata = (data << 4) | (adr & 0xf);
-
-	out = read_nic_word(dev, RFPinsOutput) & 0xfff3;
-
-	write_nic_word(dev, RFPinsEnable,
-		(read_nic_word(dev, RFPinsEnable) | 0x7));
-
-	select = read_nic_word(dev, RFPinsSelect);
-
-	write_nic_word(dev, RFPinsSelect, select | 0x7 |
-		       SW_CONTROL_GPIO);
-
-	force_pci_posting(dev);
-	udelay(10);
-
-	write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN);
-
-	force_pci_posting(dev);
-	udelay(2);
-
-	write_nic_word(dev, RFPinsOutput, out);
-
-	force_pci_posting(dev);
-	udelay(10);
-
-	for (i = 15; i >= 0; i--) {
-		bit = (bangdata & (1 << i)) >> i;
-
-		write_nic_word(dev, RFPinsOutput, bit | out);
-
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-
-		i--;
-		bit = (bangdata & (1 << i)) >> i;
-
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-		write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK);
-
-		write_nic_word(dev, RFPinsOutput, bit | out);
-
-	}
-
-	write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN);
-
-	force_pci_posting(dev);
-	udelay(10);
-
-	write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN);
-
-	write_nic_word(dev, RFPinsSelect, select | SW_CONTROL_GPIO);
-
-	rtl8185_rf_pins_enable(dev);
-}
-
-static const u8 rtl8225_agc[] = {
-	0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
-	0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
-	0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
-	0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
-	0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
-	0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
-	0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
-	0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
-	0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
-	0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
-	0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
-	0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
-	0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
-};
-
-static const u32 rtl8225_chan[] = {
-	0,
-	0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380,
-	0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A,
-};
-
-static const u8 rtl8225z2_gain_bg[] = {
-	0x23, 0x15, 0xa5, /* -82-1dBm */
-	0x23, 0x15, 0xb5, /* -82-2dBm */
-	0x23, 0x15, 0xc5, /* -82-3dBm */
-	0x33, 0x15, 0xc5, /* -78dBm */
-	0x43, 0x15, 0xc5, /* -74dBm */
-	0x53, 0x15, 0xc5, /* -70dBm */
-	0x63, 0x15, 0xc5, /* -66dBm */
-};
-
-static const u8 rtl8225z2_gain_a[] = {
-	0x13, 0x27, 0x5a, /* -82dBm */
-	0x23, 0x23, 0x58, /* -82dBm */
-	0x33, 0x1f, 0x56, /* -82dBm */
-	0x43, 0x1b, 0x54, /* -78dBm */
-	0x53, 0x17, 0x51, /* -74dBm */
-	0x63, 0x24, 0x4f, /* -70dBm */
-	0x73, 0x0f, 0x4c, /* -66dBm */
-};
-
-static const u16 rtl8225z2_rxgain[] = {
-	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
-	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
-	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
-	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
-	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
-	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
-	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
-	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
-	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
-	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
-	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
-	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb
-
-};
-
-static void rtl8225z2_set_gain(struct net_device *dev, short gain)
-{
-	const u8 *rtl8225_gain;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 mode = priv->ieee80211->mode;
-
-	if (mode == IEEE_B || mode == IEEE_G)
-		rtl8225_gain = rtl8225z2_gain_bg;
-	else
-		rtl8225_gain = rtl8225z2_gain_a;
-
-	write_phy_ofdm(dev, 0x0b, rtl8225_gain[gain * 3]);
-	write_phy_ofdm(dev, 0x1b, rtl8225_gain[gain * 3 + 1]);
-	write_phy_ofdm(dev, 0x1d, rtl8225_gain[gain * 3 + 2]);
-	write_phy_ofdm(dev, 0x21, 0x37);
-}
-
-static u32 read_rtl8225(struct net_device *dev, u8 adr)
-{
-	u32 data2Write = ((u32)(adr & 0x1f)) << 27;
-	u32 dataRead;
-	u32 mask;
-	u16 oval, oval2, oval3, tmp;
-	int i;
-	short bit, rw;
-	u8 wLength = 6;
-	u8 rLength = 12;
-	u8 low2high = 0;
-
-	oval = read_nic_word(dev, RFPinsOutput);
-	oval2 = read_nic_word(dev, RFPinsEnable);
-	oval3 = read_nic_word(dev, RFPinsSelect);
-
-	write_nic_word(dev, RFPinsEnable, (oval2|0xf));
-	write_nic_word(dev, RFPinsSelect, (oval3|0xf));
-
-	dataRead = 0;
-
-	oval &= ~0xf;
-
-	write_nic_word(dev, RFPinsOutput, oval | BB_HOST_BANG_EN);
-	udelay(4);
-
-	write_nic_word(dev, RFPinsOutput, oval);
-	udelay(5);
-
-	rw = 0;
-
-	mask = (low2high) ? 0x01 : (((u32)0x01)<<(32-1));
-
-	for (i = 0; i < wLength/2; i++) {
-		bit = ((data2Write&mask) != 0) ? 1 : 0;
-		write_nic_word(dev, RFPinsOutput, bit | oval | rw);
-		udelay(1);
-
-		write_nic_word(dev, RFPinsOutput,
-				bit | oval | BB_HOST_BANG_CLK | rw);
-		udelay(2);
-		write_nic_word(dev, RFPinsOutput,
-				bit | oval | BB_HOST_BANG_CLK | rw);
-		udelay(2);
-
-		mask = (low2high) ? (mask<<1) : (mask>>1);
-
-		if (i == 2) {
-			rw = BB_HOST_BANG_RW;
-			write_nic_word(dev, RFPinsOutput,
-					bit | oval | BB_HOST_BANG_CLK | rw);
-			udelay(2);
-			write_nic_word(dev, RFPinsOutput, bit | oval | rw);
-			udelay(2);
-			break;
-		}
-
-		bit = ((data2Write&mask) != 0) ? 1 : 0;
-
-		write_nic_word(dev, RFPinsOutput,
-				oval | bit | rw | BB_HOST_BANG_CLK);
-		udelay(2);
-		write_nic_word(dev, RFPinsOutput,
-				oval | bit | rw | BB_HOST_BANG_CLK);
-		udelay(2);
-
-		write_nic_word(dev, RFPinsOutput, oval | bit | rw);
-		udelay(1);
-
-		mask = (low2high) ? (mask<<1) : (mask>>1);
-	}
-
-	write_nic_word(dev, RFPinsOutput, rw|oval);
-	udelay(2);
-	mask = (low2high) ? 0x01 : (((u32)0x01) << (12-1));
-
-	/*
-	 * We must set data pin to HW controlled, otherwise RF can't driver it
-	 * and value RF register won't be able to read back properly.
-	 */
-	write_nic_word(dev, RFPinsEnable, (oval2 & (~0x01)));
-
-	for (i = 0; i < rLength; i++) {
-		write_nic_word(dev, RFPinsOutput, rw|oval); udelay(1);
-
-		write_nic_word(dev, RFPinsOutput, rw|oval|BB_HOST_BANG_CLK);
-		udelay(2);
-		write_nic_word(dev, RFPinsOutput, rw|oval|BB_HOST_BANG_CLK);
-		udelay(2);
-		write_nic_word(dev, RFPinsOutput, rw|oval|BB_HOST_BANG_CLK);
-		udelay(2);
-		tmp = read_nic_word(dev, RFPinsInput);
-
-		dataRead |= (tmp & BB_HOST_BANG_CLK ? mask : 0);
-
-		write_nic_word(dev, RFPinsOutput, (rw|oval)); udelay(2);
-
-		mask = (low2high) ? (mask<<1) : (mask>>1);
-	}
-
-	write_nic_word(dev, RFPinsOutput,
-			BB_HOST_BANG_EN | BB_HOST_BANG_RW | oval);
-	udelay(2);
-
-	write_nic_word(dev, RFPinsEnable, oval2);
-	write_nic_word(dev, RFPinsSelect, oval3); /* Set To SW Switch */
-	write_nic_word(dev, RFPinsOutput, 0x3a0);
-
-	return dataRead;
-}
-
-void rtl8225z2_rf_close(struct net_device *dev)
-{
-	RF_WriteReg(dev, 0x4, 0x1f);
-
-	force_pci_posting(dev);
-	mdelay(1);
-
-	rtl8180_set_anaparam(dev, RTL8225z2_ANAPARAM_OFF);
-	rtl8185_set_anaparam2(dev, RTL8225z2_ANAPARAM2_OFF);
-}
-
-/*
- * Map dBm into Tx power index according to current HW model, for example,
- * RF and PA, and current wireless mode.
- */
-static s8 DbmToTxPwrIdx(struct r8180_priv *priv,
-			enum wireless_mode mode, s32 PowerInDbm)
-{
-	bool bUseDefault = true;
-	s8 TxPwrIdx = 0;
-
-	/*
-	 * OFDM Power in dBm = Index * 0.5 + 0
-	 * CCK Power in dBm = Index * 0.25 + 13
-	 */
-	s32 tmp = 0;
-
-	if (mode == WIRELESS_MODE_G) {
-		bUseDefault = false;
-		tmp = (2 * PowerInDbm);
-
-		if (tmp < 0)
-			TxPwrIdx = 0;
-		else if (tmp > 40) /* 40 means 20 dBm. */
-			TxPwrIdx = 40;
-		else
-			TxPwrIdx = (s8)tmp;
-	} else if (mode == WIRELESS_MODE_B) {
-		bUseDefault = false;
-		tmp = (4 * PowerInDbm) - 52;
-
-		if (tmp < 0)
-			TxPwrIdx = 0;
-		else if (tmp > 28) /* 28 means 20 dBm. */
-			TxPwrIdx = 28;
-		else
-			TxPwrIdx = (s8)tmp;
-	}
-
-	/*
-	 * TRUE if we want to use a default implementation.
-	 * We shall set it to FALSE when we have exact translation formula
-	 * for target IC. 070622, by rcnjko.
-	 */
-	if (bUseDefault) {
-		if (PowerInDbm < 0)
-			TxPwrIdx = 0;
-		else if (PowerInDbm > 35)
-			TxPwrIdx = 35;
-		else
-			TxPwrIdx = (u8)PowerInDbm;
-	}
-
-	return TxPwrIdx;
-}
-
-void rtl8225z2_SetTXPowerLevel(struct net_device *dev, short ch)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 max_cck_power_level;
-	u8 max_ofdm_power_level;
-	u8 min_ofdm_power_level;
-	char cck_power_level = (char)(0xff & priv->chtxpwr[ch]);
-	char ofdm_power_level = (char)(0xff & priv->chtxpwr_ofdm[ch]);
-
-	if (IS_DOT11D_ENABLE(priv->ieee80211) &&
-	    IS_DOT11D_STATE_DONE(priv->ieee80211)) {
-		u8 MaxTxPwrInDbm = DOT11D_GetMaxTxPwrInDbm(priv->ieee80211, ch);
-		u8 CckMaxPwrIdx = DbmToTxPwrIdx(priv, WIRELESS_MODE_B,
-							MaxTxPwrInDbm);
-		u8 OfdmMaxPwrIdx = DbmToTxPwrIdx(priv, WIRELESS_MODE_G,
-							MaxTxPwrInDbm);
-
-		if (cck_power_level > CckMaxPwrIdx)
-			cck_power_level = CckMaxPwrIdx;
-		if (ofdm_power_level > OfdmMaxPwrIdx)
-			ofdm_power_level = OfdmMaxPwrIdx;
-	}
-
-	max_cck_power_level = 15;
-	max_ofdm_power_level = 25;
-	min_ofdm_power_level = 10;
-
-	if (cck_power_level > 35)
-		cck_power_level = 35;
-
-	write_nic_byte(dev, CCK_TXAGC, cck_power_level);
-	force_pci_posting(dev);
-	mdelay(1);
-
-	if (ofdm_power_level > 35)
-		ofdm_power_level = 35;
-
-	if (priv->up == 0) {
-		write_phy_ofdm(dev, 2, 0x42);
-		write_phy_ofdm(dev, 5, 0x00);
-		write_phy_ofdm(dev, 6, 0x40);
-		write_phy_ofdm(dev, 7, 0x00);
-		write_phy_ofdm(dev, 8, 0x40);
-	}
-
-	write_nic_byte(dev, OFDM_TXAGC, ofdm_power_level);
-
-	if (ofdm_power_level <= 11) {
-		write_phy_ofdm(dev, 0x07, 0x5c);
-		write_phy_ofdm(dev, 0x09, 0x5c);
-	}
-
-	if (ofdm_power_level <= 17) {
-		write_phy_ofdm(dev, 0x07, 0x54);
-		write_phy_ofdm(dev, 0x09, 0x54);
-	} else {
-		write_phy_ofdm(dev, 0x07, 0x50);
-		write_phy_ofdm(dev, 0x09, 0x50);
-	}
-
-	force_pci_posting(dev);
-	mdelay(1);
-}
-
-void rtl8225z2_rf_set_chan(struct net_device *dev, short ch)
-{
-	rtl8225z2_SetTXPowerLevel(dev, ch);
-
-	RF_WriteReg(dev, 0x7, rtl8225_chan[ch]);
-
-	if ((RF_ReadReg(dev, 0x7) & 0x0F80) != rtl8225_chan[ch])
-		RF_WriteReg(dev, 0x7, rtl8225_chan[ch]);
-
-	mdelay(1);
-
-	force_pci_posting(dev);
-	mdelay(10);
-}
-
-static void rtl8225_host_pci_init(struct net_device *dev)
-{
-	write_nic_word(dev, RFPinsOutput, 0x480);
-
-	rtl8185_rf_pins_enable(dev);
-
-	write_nic_word(dev, RFPinsSelect, 0x88 | SW_CONTROL_GPIO);
-
-	write_nic_byte(dev, GP_ENABLE, 0);
-
-	force_pci_posting(dev);
-	mdelay(200);
-
-	/* bit 6 is for RF on/off detection */
-	write_nic_word(dev, GP_ENABLE, 0xff & (~(1 << 6)));
-}
-
-void rtl8225z2_rf_init(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int i;
-	short channel = 1;
-	u16 brsr;
-	u32 data;
-
-	priv->chan = channel;
-
-	rtl8225_host_pci_init(dev);
-
-	write_nic_dword(dev, RF_TIMING, 0x000a8008);
-
-	brsr = read_nic_word(dev, BRSR);
-
-	write_nic_word(dev, BRSR, 0xffff);
-
-	write_nic_dword(dev, RF_PARA, 0x100044);
-
-	rtl8180_set_mode(dev, EPROM_CMD_CONFIG);
-	write_nic_byte(dev, CONFIG3, 0x44);
-	rtl8180_set_mode(dev, EPROM_CMD_NORMAL);
-
-	rtl8185_rf_pins_enable(dev);
-
-	write_rtl8225(dev, 0x0, 0x2bf); mdelay(1);
-	write_rtl8225(dev, 0x1, 0xee0); mdelay(1);
-	write_rtl8225(dev, 0x2, 0x44d); mdelay(1);
-	write_rtl8225(dev, 0x3, 0x441); mdelay(1);
-	write_rtl8225(dev, 0x4, 0x8c3); mdelay(1);
-	write_rtl8225(dev, 0x5, 0xc72); mdelay(1);
-	write_rtl8225(dev, 0x6, 0xe6);  mdelay(1);
-	write_rtl8225(dev, 0x7, rtl8225_chan[channel]);  mdelay(1);
-	write_rtl8225(dev, 0x8, 0x3f);  mdelay(1);
-	write_rtl8225(dev, 0x9, 0x335); mdelay(1);
-	write_rtl8225(dev, 0xa, 0x9d4); mdelay(1);
-	write_rtl8225(dev, 0xb, 0x7bb); mdelay(1);
-	write_rtl8225(dev, 0xc, 0x850); mdelay(1);
-	write_rtl8225(dev, 0xd, 0xcdf); mdelay(1);
-	write_rtl8225(dev, 0xe, 0x2b);  mdelay(1);
-	write_rtl8225(dev, 0xf, 0x114);
-
-	mdelay(100);
-
-	write_rtl8225(dev, 0x0, 0x1b7);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
-		write_rtl8225(dev, 0x1, i + 1);
-		write_rtl8225(dev, 0x2, rtl8225z2_rxgain[i]);
-	}
-
-	write_rtl8225(dev, 0x3, 0x80);
-	write_rtl8225(dev, 0x5, 0x4);
-
-	write_rtl8225(dev, 0x0, 0xb7);
-
-	write_rtl8225(dev, 0x2, 0xc4d);
-
-	/* FIXME!! rtl8187 we have to check if calibrarion
-	 * is successful and eventually cal. again (repeat
-	 * the two write on reg 2)
-	 */
-	data = read_rtl8225(dev, 6);
-	if (!(data & 0x00000080)) {
-		write_rtl8225(dev, 0x02, 0x0c4d);
-		force_pci_posting(dev); mdelay(200);
-		write_rtl8225(dev, 0x02, 0x044d);
-		force_pci_posting(dev); mdelay(100);
-		data = read_rtl8225(dev, 6);
-		if (!(data & 0x00000080))
-			DMESGW("RF Calibration Failed!!!!\n");
-	}
-
-	mdelay(200);
-
-	write_rtl8225(dev, 0x0, 0x2bf);
-
-	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
-		write_phy_ofdm(dev, 0xb, rtl8225_agc[i]);
-		mdelay(1);
-
-		/* enable writing AGC table */
-		write_phy_ofdm(dev, 0xa, i + 0x80);
-		mdelay(1);
-	}
-
-	force_pci_posting(dev);
-	mdelay(1);
-
-	write_phy_ofdm(dev, 0x00, 0x01); mdelay(1);
-	write_phy_ofdm(dev, 0x01, 0x02); mdelay(1);
-	write_phy_ofdm(dev, 0x02, 0x62); mdelay(1);
-	write_phy_ofdm(dev, 0x03, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x04, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x05, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x06, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x07, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x08, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x09, 0xfe); mdelay(1);
-	write_phy_ofdm(dev, 0x0a, 0x08); mdelay(1);
-	write_phy_ofdm(dev, 0x0b, 0x80); mdelay(1);
-	write_phy_ofdm(dev, 0x0c, 0x01); mdelay(1);
-	write_phy_ofdm(dev, 0x0d, 0x43);
-	write_phy_ofdm(dev, 0x0e, 0xd3); mdelay(1);
-	write_phy_ofdm(dev, 0x0f, 0x38); mdelay(1);
-	write_phy_ofdm(dev, 0x10, 0x84); mdelay(1);
-	write_phy_ofdm(dev, 0x11, 0x07); mdelay(1);
-	write_phy_ofdm(dev, 0x12, 0x20); mdelay(1);
-	write_phy_ofdm(dev, 0x13, 0x20); mdelay(1);
-	write_phy_ofdm(dev, 0x14, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x15, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x16, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x17, 0x40); mdelay(1);
-	write_phy_ofdm(dev, 0x18, 0xef); mdelay(1);
-	write_phy_ofdm(dev, 0x19, 0x19); mdelay(1);
-	write_phy_ofdm(dev, 0x1a, 0x20); mdelay(1);
-	write_phy_ofdm(dev, 0x1b, 0x15); mdelay(1);
-	write_phy_ofdm(dev, 0x1c, 0x04); mdelay(1);
-	write_phy_ofdm(dev, 0x1d, 0xc5); mdelay(1);
-	write_phy_ofdm(dev, 0x1e, 0x95); mdelay(1);
-	write_phy_ofdm(dev, 0x1f, 0x75); mdelay(1);
-	write_phy_ofdm(dev, 0x20, 0x1f); mdelay(1);
-	write_phy_ofdm(dev, 0x21, 0x17); mdelay(1);
-	write_phy_ofdm(dev, 0x22, 0x16); mdelay(1);
-	write_phy_ofdm(dev, 0x23, 0x80); mdelay(1); /* FIXME maybe not needed */
-	write_phy_ofdm(dev, 0x24, 0x46); mdelay(1);
-	write_phy_ofdm(dev, 0x25, 0x00); mdelay(1);
-	write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);
-	write_phy_ofdm(dev, 0x27, 0x88); mdelay(1);
-
-	rtl8225z2_set_gain(dev, 4);
-
-	write_phy_cck(dev, 0x0, 0x98); mdelay(1);
-	write_phy_cck(dev, 0x3, 0x20); mdelay(1);
-	write_phy_cck(dev, 0x4, 0x7e); mdelay(1);
-	write_phy_cck(dev, 0x5, 0x12); mdelay(1);
-	write_phy_cck(dev, 0x6, 0xfc); mdelay(1);
-	write_phy_cck(dev, 0x7, 0x78); mdelay(1);
-	write_phy_cck(dev, 0x8, 0x2e); mdelay(1);
-	write_phy_cck(dev, 0x10, 0x93); mdelay(1);
-	write_phy_cck(dev, 0x11, 0x88); mdelay(1);
-	write_phy_cck(dev, 0x12, 0x47); mdelay(1);
-	write_phy_cck(dev, 0x13, 0xd0);
-	write_phy_cck(dev, 0x19, 0x00);
-	write_phy_cck(dev, 0x1a, 0xa0);
-	write_phy_cck(dev, 0x1b, 0x08);
-	write_phy_cck(dev, 0x40, 0x86); /* CCK Carrier Sense Threshold */
-	write_phy_cck(dev, 0x41, 0x8d); mdelay(1);
-	write_phy_cck(dev, 0x42, 0x15); mdelay(1);
-	write_phy_cck(dev, 0x43, 0x18); mdelay(1);
-	write_phy_cck(dev, 0x44, 0x36); mdelay(1);
-	write_phy_cck(dev, 0x45, 0x35); mdelay(1);
-	write_phy_cck(dev, 0x46, 0x2e); mdelay(1);
-	write_phy_cck(dev, 0x47, 0x25); mdelay(1);
-	write_phy_cck(dev, 0x48, 0x1c); mdelay(1);
-	write_phy_cck(dev, 0x49, 0x12); mdelay(1);
-	write_phy_cck(dev, 0x4a, 0x09); mdelay(1);
-	write_phy_cck(dev, 0x4b, 0x04); mdelay(1);
-	write_phy_cck(dev, 0x4c, 0x05); mdelay(1);
-
-	write_nic_byte(dev, 0x5b, 0x0d); mdelay(1);
-
-	rtl8225z2_SetTXPowerLevel(dev, channel);
-
-	/* RX antenna default to A */
-	write_phy_cck(dev, 0x11, 0x9b); mdelay(1);		/* B: 0xDB */
-	write_phy_ofdm(dev, 0x26, 0x90); mdelay(1);		/* B: 0x10 */
-
-	rtl8185_tx_antenna(dev, 0x03);				/* B: 0x00 */
-
-	/* switch to high-speed 3-wire
-	 * last digit. 2 for both cck and ofdm
-	 */
-	write_nic_dword(dev, 0x94, 0x15c00002);
-	rtl8185_rf_pins_enable(dev);
-
-	rtl8225z2_rf_set_chan(dev, priv->chan);
-}
-
-#define MAX_DOZE_WAITING_TIMES_85B		20
-#define MAX_POLLING_24F_TIMES_87SE		10
-#define LPS_MAX_SLEEP_WAITING_TIMES_87SE	5
-
-bool SetZebraRFPowerState8185(struct net_device *dev,
-			      enum rt_rf_power_state eRFPowerState)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8			btCR9346, btConfig3;
-	bool bActionAllowed = true, bTurnOffBB = true;
-	u8			u1bTmp;
-	int			i;
-	bool		bResult = true;
-	u8			QueueID;
-
-	if (priv->SetRFPowerStateInProgress == true)
-		return false;
-
-	priv->SetRFPowerStateInProgress = true;
-
-	btCR9346 = read_nic_byte(dev, CR9346);
-	write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));
-
-	btConfig3 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, (btConfig3 | CONFIG3_PARM_En));
-
-	switch (eRFPowerState) {
-	case RF_ON:
-		write_nic_word(dev, 0x37C, 0x00EC);
-
-		/* turn on AFE */
-		write_nic_byte(dev, 0x54, 0x00);
-		write_nic_byte(dev, 0x62, 0x00);
-
-		/* turn on RF */
-		RF_WriteReg(dev, 0x0, 0x009f); udelay(500);
-		RF_WriteReg(dev, 0x4, 0x0972); udelay(500);
-
-		/* turn on RF again */
-		RF_WriteReg(dev, 0x0, 0x009f); udelay(500);
-		RF_WriteReg(dev, 0x4, 0x0972); udelay(500);
-
-		/* turn on BB */
-		write_phy_ofdm(dev, 0x10, 0x40);
-		write_phy_ofdm(dev, 0x12, 0x40);
-
-		/* Avoid power down at init time. */
-		write_nic_byte(dev, CONFIG4, priv->RFProgType);
-
-		u1bTmp = read_nic_byte(dev, 0x24E);
-		write_nic_byte(dev, 0x24E, (u1bTmp & (~(BIT5 | BIT6))));
-		break;
-	case RF_SLEEP:
-		for (QueueID = 0, i = 0; QueueID < 6;) {
-			if (get_curr_tx_free_desc(dev, QueueID) ==
-							priv->txringcount) {
-				QueueID++;
-				continue;
-			} else {
-				priv->TxPollingTimes++;
-				if (priv->TxPollingTimes >=
-					LPS_MAX_SLEEP_WAITING_TIMES_87SE) {
-					bActionAllowed = false;
-					break;
-				} else
-					udelay(10);
-			}
-		}
-
-		if (bActionAllowed) {
-			/* turn off BB RXIQ matrix to cut off rx signal */
-			write_phy_ofdm(dev, 0x10, 0x00);
-			write_phy_ofdm(dev, 0x12, 0x00);
-
-			/* turn off RF */
-			RF_WriteReg(dev, 0x4, 0x0000);
-			RF_WriteReg(dev, 0x0, 0x0000);
-
-			/* turn off AFE except PLL */
-			write_nic_byte(dev, 0x62, 0xff);
-			write_nic_byte(dev, 0x54, 0xec);
-
-			mdelay(1);
-
-			{
-				int i = 0;
-				while (true) {
-					u8 tmp24F = read_nic_byte(dev, 0x24f);
-
-					if ((tmp24F == 0x01) ||
-							(tmp24F == 0x09)) {
-						bTurnOffBB = true;
-						break;
-					} else {
-						udelay(10);
-						i++;
-						priv->TxPollingTimes++;
-
-						if (priv->TxPollingTimes >= LPS_MAX_SLEEP_WAITING_TIMES_87SE) {
-							bTurnOffBB = false;
-							break;
-						} else
-							udelay(10);
-					}
-				}
-			}
-
-			if (bTurnOffBB) {
-				/* turn off BB */
-				u1bTmp = read_nic_byte(dev, 0x24E);
-				write_nic_byte(dev, 0x24E,
-						(u1bTmp | BIT5 | BIT6));
-
-				/* turn off AFE PLL */
-				write_nic_byte(dev, 0x54, 0xFC);
-				write_nic_word(dev, 0x37C, 0x00FC);
-			}
-		}
-		break;
-	case RF_OFF:
-		for (QueueID = 0, i = 0; QueueID < 6;) {
-			if (get_curr_tx_free_desc(dev, QueueID) ==
-					priv->txringcount) {
-				QueueID++;
-				continue;
-			} else {
-				udelay(10);
-				i++;
-			}
-
-			if (i >= MAX_DOZE_WAITING_TIMES_85B)
-				break;
-		}
-
-		/* turn off BB RXIQ matrix to cut off rx signal */
-		write_phy_ofdm(dev, 0x10, 0x00);
-		write_phy_ofdm(dev, 0x12, 0x00);
-
-		/* turn off RF */
-		RF_WriteReg(dev, 0x4, 0x0000);
-		RF_WriteReg(dev, 0x0, 0x0000);
-
-		/* turn off AFE except PLL */
-		write_nic_byte(dev, 0x62, 0xff);
-		write_nic_byte(dev, 0x54, 0xec);
-
-		mdelay(1);
-
-		{
-			int i = 0;
-
-			while (true) {
-				u8 tmp24F = read_nic_byte(dev, 0x24f);
-
-				if ((tmp24F == 0x01) || (tmp24F == 0x09)) {
-					bTurnOffBB = true;
-					break;
-				} else {
-					bTurnOffBB = false;
-					udelay(10);
-					i++;
-				}
-
-				if (i > MAX_POLLING_24F_TIMES_87SE)
-					break;
-			}
-		}
-
-		if (bTurnOffBB) {
-			/* turn off BB */
-			u1bTmp = read_nic_byte(dev, 0x24E);
-			write_nic_byte(dev, 0x24E, (u1bTmp | BIT5 | BIT6));
-
-			/* turn off AFE PLL (80M) */
-			write_nic_byte(dev, 0x54, 0xFC);
-			write_nic_word(dev, 0x37C, 0x00FC);
-		}
-		break;
-	}
-
-	btConfig3 &= ~(CONFIG3_PARM_En);
-	write_nic_byte(dev, CONFIG3, btConfig3);
-
-	btCR9346 &= ~(0xC0);
-	write_nic_byte(dev, CR9346, btCR9346);
-
-	if (bResult && bActionAllowed)
-		priv->eRFPowerState = eRFPowerState;
-
-	priv->SetRFPowerStateInProgress = false;
-
-	return bResult && bActionAllowed;
-}
-
-void rtl8225z4_rf_sleep(struct net_device *dev)
-{
-	MgntActSet_RF_State(dev, RF_SLEEP, RF_CHANGE_BY_PS);
-}
-
-void rtl8225z4_rf_wakeup(struct net_device *dev)
-{
-	MgntActSet_RF_State(dev, RF_ON, RF_CHANGE_BY_PS);
-}
diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c
deleted file mode 100644
index b55249170f18..000000000000
--- a/drivers/staging/rtl8187se/r8180_wx.c
+++ /dev/null
@@ -1,1409 +0,0 @@
-/*
-	This file contains wireless extension handlers.
-
-	This is part of rtl8180 OpenSource driver.
-	Copyright (C) Andrea Merello 2004-2005  <andrea.merello@gmail.com>
-	Released under the terms of GPL (General Public Licence)
-
-	Parts of this driver are based on the GPL part
-	of the official realtek driver.
-
-	Parts of this driver are based on the rtl8180 driver skeleton
-	from Patric Schenke & Andres Salomon.
-
-	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
-
-	We want to thanks the Authors of those projects and the Ndiswrapper
-	project Authors.
-*/
-
-
-#include "r8180.h"
-#include "r8180_hw.h"
-
-#include <net/iw_handler.h>
-#include "ieee80211/dot11d.h"
-
-static u32 rtl8180_rates[] = {1000000, 2000000, 5500000, 11000000,
-	6000000, 9000000, 12000000, 18000000, 24000000, 36000000, 48000000, 54000000};
-
-#define RATE_COUNT ARRAY_SIZE(rtl8180_rates)
-
-static struct rtl8187se_channel_list default_channel_plan[] = {
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64}, 19},		/* FCC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}, 11},						/* IC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21},	/* ETSI	*/
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21},	/* Spain. Change to ETSI. */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21},	/* France. Change to ETSI. */
-	{{14, 36, 40, 44, 48, 52, 56, 60, 64}, 9},						/* MKK */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 36, 40, 44, 48, 52, 56, 60, 64}, 22},	/* MKK1	*/
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64}, 21},	/* Israel */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 34, 38, 42, 46}, 17},			/* For 11a , TELEC */
-	{{1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14}, 14}					/* For Global Domain. 1-11:active scan, 12-14 passive scan.*/	/* +YJ, 080626 */
-};
-static int r8180_wx_get_freq(struct net_device *dev,
-			     struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	return ieee80211_wx_get_freq(priv->ieee80211, a, wrqu, b);
-}
-
-
-static int r8180_wx_set_key(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *key)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct iw_point *erq = &(wrqu->encoding);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	if (erq->length > 0) {
-		u32 *tkey = (u32 *) key;
-		priv->key0[0] = tkey[0];
-		priv->key0[1] = tkey[1];
-		priv->key0[2] = tkey[2];
-		priv->key0[3] = tkey[3] & 0xff;
-		DMESG("Setting wep key to %x %x %x %x",
-		      tkey[0], tkey[1], tkey[2], tkey[3]);
-		rtl8180_set_hw_wep(dev);
-	}
-	return 0;
-}
-
-
-static int r8180_wx_set_beaconinterval(struct net_device *dev,
-				       struct iw_request_info *aa,
-				       union iwreq_data *wrqu, char *b)
-{
-	int *parms = (int *)b;
-	int bi = parms[0];
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	DMESG("setting beacon interval to %x", bi);
-
-	priv->ieee80211->current_network.beacon_interval = bi;
-	rtl8180_commit(dev);
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-
-
-static int r8180_wx_get_mode(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	return ieee80211_wx_get_mode(priv->ieee80211, a, wrqu, b);
-}
-
-
-
-static int r8180_wx_get_rate(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	return ieee80211_wx_get_rate(priv->ieee80211, info, wrqu, extra);
-}
-
-
-
-static int r8180_wx_set_rate(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_set_rate(priv->ieee80211, info, wrqu, extra);
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-
-static int r8180_wx_set_crcmon(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int *parms = (int *)extra;
-	int enable = (parms[0] > 0);
-	short prev = priv->crcmon;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	if (enable)
-		priv->crcmon = 1;
-	else
-		priv->crcmon = 0;
-
-	DMESG("bad CRC in monitor mode are %s",
-	      priv->crcmon ? "accepted" : "rejected");
-
-	if (prev != priv->crcmon && priv->up)	{
-		rtl8180_down(dev);
-		rtl8180_up(dev);
-	}
-
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-
-static int r8180_wx_set_mode(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	if (priv->bInactivePs)	{
-		if (wrqu->mode == IW_MODE_ADHOC)
-			IPSLeave(dev);
-	}
-	ret = ieee80211_wx_set_mode(priv->ieee80211, a, wrqu, b);
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-/* YJ,add,080819,for hidden ap */
-struct  iw_range_with_scan_capa	{
-		/* Informative stuff (to choose between different interface) */
-
-		__u32		throughput; /* To give an idea... */
-
-		/* In theory this value should be the maximum benchmarked
-		 * TCP/IP throughput, because with most of these devices the
-		 * bit rate is meaningless (overhead an co) to estimate how
-		 * fast the connection will go and pick the fastest one.
-		 * I suggest people to play with Netperf or any benchmark...
-		 */
-
-		/* NWID (or domain id)	*/
-		__u32           min_nwid; /* Minimal NWID we are able to set */
-		__u32			max_nwid; /* Maximal NWID we are able to set */
-
-		/* Old Frequency (backward compat - moved lower ) */
-		__u16			old_num_channels;
-		__u8			old_num_frequency;
-
-		/* Scan capabilities */
-		__u8			scan_capa;
-};
-/* YJ,add,080819,for hidden ap */
-
-
-static int rtl8180_wx_get_range(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct iw_range *range = (struct iw_range *)extra;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u16 val;
-	int i;
-
-	wrqu->data.length = sizeof(*range);
-	memset(range, 0, sizeof(*range));
-
-	/* Let's try to keep this struct in the same order as in
-	 * linux/include/wireless.h
-	 */
-
-	/* TODO: See what values we can set, and remove the ones we can't
-	 * set, or fill them with some default data.
-	 */
-
-	/* ~5 Mb/s real (802.11b) */
-	range->throughput = 5 * 1000 * 1000;
-
-	/* TODO: Not used in 802.11b?	*/
-/*	range->min_nwid; */	/* Minimal NWID we are able to set */
-	/* TODO: Not used in 802.11b?	*/
-/*	range->max_nwid; */	/* Maximal NWID we are able to set */
-
-		/* Old Frequency (backward compat - moved lower ) */
-/*	range->old_num_channels; */
-/*	range->old_num_frequency; */
-/*	range->old_freq[6]; */ /* Filler to keep "version" at the same offset */
-	if (priv->rf_set_sens != NULL)
-		range->sensitivity = priv->max_sens;	/* signal level threshold range */
-
-	range->max_qual.qual = 100;
-	/* TODO: Find real max RSSI and stick here */
-	range->max_qual.level = 0;
-	range->max_qual.noise = -98;
-	range->max_qual.updated = 7; /* Updated all three */
-
-	range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */
-	/* TODO: Find real 'good' to 'bad' threshold value for RSSI */
-	range->avg_qual.level = 20 + -98;
-	range->avg_qual.noise = 0;
-	range->avg_qual.updated = 7; /* Updated all three */
-
-	range->num_bitrates = RATE_COUNT;
-
-	for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++)
-		range->bitrate[i] = rtl8180_rates[i];
-
-	range->min_frag = MIN_FRAG_THRESHOLD;
-	range->max_frag = MAX_FRAG_THRESHOLD;
-
-	range->pm_capa = 0;
-
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 16;
-
-		range->num_channels = 14;
-
-	for (i = 0, val = 0; i < 14; i++) {
-
-		/* Include only legal frequencies for some countries */
-		if ((GET_DOT11D_INFO(priv->ieee80211)->channel_map)[i+1]) {
-				range->freq[val].i = i + 1;
-			range->freq[val].m = ieee80211_wlan_frequencies[i] * 100000;
-			range->freq[val].e = 1;
-			val++;
-		} else {
-			/* FIXME: do we need to set anything for channels */
-			/* we don't use ? */
-		}
-
-		if (val == IW_MAX_FREQUENCIES)
-			break;
-	}
-
-	range->num_frequency = val;
-	range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
-						IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
-
-	return 0;
-}
-
-
-static int r8180_wx_set_scan(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-	struct ieee80211_device *ieee = priv->ieee80211;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	if (wrqu->data.flags & IW_SCAN_THIS_ESSID)	{
-		struct iw_scan_req *req = (struct iw_scan_req *)b;
-		if (req->essid_len)		{
-			ieee->current_network.ssid_len = req->essid_len;
-			memcpy(ieee->current_network.ssid, req->essid, req->essid_len);
-		}
-	}
-
-	down(&priv->wx_sem);
-	if (priv->up)	{
-		priv->ieee80211->actscanning = true;
-		if (priv->bInactivePs && (priv->ieee80211->state != IEEE80211_LINKED))	{
-			IPSLeave(dev);
-		ieee80211_softmac_ips_scan_syncro(priv->ieee80211);
-			ret = 0;
-		}	else	{
-			/* prevent scan in BusyTraffic */
-			/* FIXME: Need to consider last scan time */
-			if ((priv->link_detect.b_busy_traffic) && (true)) {
-				ret = 0;
-				printk("Now traffic is busy, please try later!\n");
-			}	else
-				/* prevent scan in BusyTraffic,end */
-				ret = ieee80211_wx_set_scan(priv->ieee80211, a, wrqu, b);
-		}
-	}	else
-			ret = -1;
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-
-static int r8180_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	down(&priv->wx_sem);
-	if (priv->up)
-		ret = ieee80211_wx_get_scan(priv->ieee80211, a, wrqu, b);
-	else
-		ret = -1;
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-
-static int r8180_wx_set_essid(struct net_device *dev,
-			      struct iw_request_info *a,
-			      union iwreq_data *wrqu, char *b)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	int ret;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	if (priv->bInactivePs)
-		IPSLeave(dev);
-
-	ret = ieee80211_wx_set_essid(priv->ieee80211, a, wrqu, b);
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-
-static int r8180_wx_get_essid(struct net_device *dev,
-			      struct iw_request_info *a,
-			      union iwreq_data *wrqu, char *b)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_get_essid(priv->ieee80211, a, wrqu, b);
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-
-static int r8180_wx_set_freq(struct net_device *dev, struct iw_request_info *a,
-			     union iwreq_data *wrqu, char *b)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_set_freq(priv->ieee80211, a, wrqu, b);
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-
-static int r8180_wx_get_name(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	return ieee80211_wx_get_name(priv->ieee80211, info, wrqu, extra);
-}
-
-static int r8180_wx_set_frag(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	if (wrqu->frag.disabled)
-		priv->ieee80211->fts = DEFAULT_FRAG_THRESHOLD;
-	else {
-		if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
-		    wrqu->frag.value > MAX_FRAG_THRESHOLD)
-			return -EINVAL;
-
-		priv->ieee80211->fts = wrqu->frag.value & ~0x1;
-	}
-
-	return 0;
-}
-
-
-static int r8180_wx_get_frag(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	wrqu->frag.value = priv->ieee80211->fts;
-	wrqu->frag.fixed = 0;	/* no auto select */
-	wrqu->frag.disabled = (wrqu->frag.value == DEFAULT_FRAG_THRESHOLD);
-
-	return 0;
-}
-
-
-static int r8180_wx_set_wap(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *awrq, char *extra)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_set_wap(priv->ieee80211, info, awrq, extra);
-
-	up(&priv->wx_sem);
-	return ret;
-
-}
-
-
-static int r8180_wx_get_wap(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	return ieee80211_wx_get_wap(priv->ieee80211, info, wrqu, extra);
-}
-
-
-static int r8180_wx_set_enc(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *key)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-
-	down(&priv->wx_sem);
-
-	if (priv->hw_wep)
-		ret = r8180_wx_set_key(dev, info, wrqu, key);
-	else	{
-		DMESG("Setting SW wep key");
-		ret = ieee80211_wx_set_encode(priv->ieee80211, info, wrqu, key);
-	}
-
-	up(&priv->wx_sem);
-	return ret;
-}
-
-
-static int r8180_wx_get_enc(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *key)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	return ieee80211_wx_get_encode(priv->ieee80211, info, wrqu, key);
-}
-
-
-static int r8180_wx_set_scan_type(struct net_device *dev,
-				  struct iw_request_info *aa,
-				  union	iwreq_data *wrqu, char *p)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int *parms = (int *)p;
-	int mode = parms[0];
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	priv->ieee80211->active_scan = mode;
-
-	return 1;
-}
-
-static int r8180_wx_set_retry(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int err = 0;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
-	    wrqu->retry.disabled)	{
-		err = -EINVAL;
-		goto exit;
-	}
-	if (!(wrqu->retry.flags & IW_RETRY_LIMIT))	{
-		err = -EINVAL;
-		goto exit;
-	}
-
-	if (wrqu->retry.value > R8180_MAX_RETRY)	{
-		err = -EINVAL;
-		goto exit;
-	}
-	if (wrqu->retry.flags & IW_RETRY_MAX) {
-		priv->retry_rts = wrqu->retry.value;
-		DMESG("Setting retry for RTS/CTS data to %d", wrqu->retry.value);
-
-	}	else {
-		priv->retry_data = wrqu->retry.value;
-		DMESG("Setting retry for non RTS/CTS data to %d", wrqu->retry.value);
-	}
-
-	/* FIXME !
-	 * We might try to write directly the TX config register
-	 * or to restart just the (R)TX process.
-	 * I'm unsure if whole reset is really needed
-	 */
-
-	rtl8180_commit(dev);
-exit:
-	up(&priv->wx_sem);
-
-	return err;
-}
-
-static int r8180_wx_get_retry(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	wrqu->retry.disabled = 0; /* can't be disabled */
-
-	if ((wrqu->retry.flags & IW_RETRY_TYPE) ==
-	    IW_RETRY_LIFETIME)
-		return -EINVAL;
-
-	if (wrqu->retry.flags & IW_RETRY_MAX) {
-		wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
-		wrqu->retry.value = priv->retry_rts;
-	} else {
-		wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
-		wrqu->retry.value = priv->retry_data;
-	}
-
-	return 0;
-}
-
-static int r8180_wx_get_sens(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	if (priv->rf_set_sens == NULL)
-		return -1; /* we have not this support for this radio */
-	wrqu->sens.value = priv->sens;
-	return 0;
-}
-
-
-static int r8180_wx_set_sens(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	short err = 0;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	if (priv->rf_set_sens == NULL) {
-		err = -1; /* we have not this support for this radio */
-		goto exit;
-	}
-	if (priv->rf_set_sens(dev, wrqu->sens.value) == 0)
-		priv->sens = wrqu->sens.value;
-	else
-		err = -EINVAL;
-
-exit:
-	up(&priv->wx_sem);
-
-	return err;
-}
-
-
-static int r8180_wx_set_rawtx(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_set_rawtx(priv->ieee80211, info, wrqu, extra);
-
-	up(&priv->wx_sem);
-
-	return ret;
-
-}
-
-static int r8180_wx_get_power(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	down(&priv->wx_sem);
-
-	ret = ieee80211_wx_get_power(priv->ieee80211, info, wrqu, extra);
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-static int r8180_wx_set_power(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	int ret;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	printk("=>>>>>>>>>>=============================>set power:%d, %d!\n", wrqu->power.disabled, wrqu->power.flags);
-	if (wrqu->power.disabled == 0) {
-		wrqu->power.flags |= IW_POWER_ALL_R;
-		wrqu->power.flags |= IW_POWER_TIMEOUT;
-		wrqu->power.value = 1000;
-	}
-
-	ret = ieee80211_wx_set_power(priv->ieee80211, info, wrqu, extra);
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-
-static int r8180_wx_set_rts(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	if (wrqu->rts.disabled)
-		priv->rts = DEFAULT_RTS_THRESHOLD;
-	else {
-		if (wrqu->rts.value < MIN_RTS_THRESHOLD ||
-		    wrqu->rts.value > MAX_RTS_THRESHOLD)
-			return -EINVAL;
-
-		priv->rts = wrqu->rts.value;
-	}
-
-	return 0;
-}
-static int r8180_wx_get_rts(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-
-	wrqu->rts.value = priv->rts;
-	wrqu->rts.fixed = 0;	/* no auto select */
-	wrqu->rts.disabled = (wrqu->rts.value == 0);
-
-	return 0;
-}
-static int dummy(struct net_device *dev, struct iw_request_info *a,
-		 union iwreq_data *wrqu, char *b)
-{
-	return -1;
-}
-
-static int r8180_wx_get_iwmode(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee;
-	int ret = 0;
-
-
-
-	down(&priv->wx_sem);
-
-	ieee = priv->ieee80211;
-
-	strcpy(extra, "802.11");
-	if (ieee->modulation & IEEE80211_CCK_MODULATION) {
-		strcat(extra, "b");
-		if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-			strcat(extra, "/g");
-	} else if (ieee->modulation & IEEE80211_OFDM_MODULATION)
-		strcat(extra, "g");
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_set_iwmode(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-	int *param = (int *)extra;
-	int ret = 0;
-	int modulation = 0, mode = 0;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-
-	if (*param == 1) {
-		modulation |= IEEE80211_CCK_MODULATION;
-		mode = IEEE_B;
-	printk(KERN_INFO "B mode!\n");
-	} else if (*param == 2) {
-		modulation |= IEEE80211_OFDM_MODULATION;
-		mode = IEEE_G;
-	printk(KERN_INFO "G mode!\n");
-	} else if (*param == 3) {
-		modulation |= IEEE80211_CCK_MODULATION;
-		modulation |= IEEE80211_OFDM_MODULATION;
-		mode = IEEE_B|IEEE_G;
-	printk(KERN_INFO "B/G mode!\n");
-	}
-
-	if (ieee->proto_started) {
-		ieee80211_stop_protocol(ieee);
-		ieee->mode = mode;
-		ieee->modulation = modulation;
-		ieee80211_start_protocol(ieee);
-	} else {
-		ieee->mode = mode;
-		ieee->modulation = modulation;
-	}
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_get_preamble(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-
-	down(&priv->wx_sem);
-
-
-
-	*extra = (char) priv->plcp_preamble_mode;	/* 0:auto 1:short 2:long */
-	up(&priv->wx_sem);
-
-	return 0;
-}
-static int r8180_wx_set_preamble(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret = 0;
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	if (*extra < 0 || *extra > 2)
-		ret = -1;
-	else
-		priv->plcp_preamble_mode = *((short *)extra);
-
-
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_get_siglevel(struct net_device *dev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret = 0;
-
-
-
-	down(&priv->wx_sem);
-	/* Modify by hikaru 6.5 */
-	*((int *)extra) = priv->wstats.qual.level;/*for interface test ,it should be the priv->wstats.qual.level; */
-
-
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_get_sigqual(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret = 0;
-
-
-
-	down(&priv->wx_sem);
-	/* Modify by hikaru 6.5	*/
-	*((int *)extra) = priv->wstats.qual.qual;/* for interface test ,it should be the priv->wstats.qual.qual; */
-
-
-
-	up(&priv->wx_sem);
-
-	return ret;
-}
-static int r8180_wx_reset_stats(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	down(&priv->wx_sem);
-
-	priv->stats.txrdu = 0;
-	priv->stats.rxrdu = 0;
-	priv->stats.rxnolast = 0;
-	priv->stats.rxnodata = 0;
-	priv->stats.rxnopointer = 0;
-	priv->stats.txnperr = 0;
-	priv->stats.txresumed = 0;
-	priv->stats.rxerr = 0;
-	priv->stats.rxoverflow = 0;
-	priv->stats.rxint = 0;
-
-	priv->stats.txnpokint = 0;
-	priv->stats.txhpokint = 0;
-	priv->stats.txhperr = 0;
-	priv->stats.ints = 0;
-	priv->stats.shints = 0;
-	priv->stats.txoverflow = 0;
-	priv->stats.rxdmafail = 0;
-	priv->stats.txbeacon = 0;
-	priv->stats.txbeaconerr = 0;
-	priv->stats.txlpokint = 0;
-	priv->stats.txlperr = 0;
-	priv->stats.txretry = 0;/* 20060601 */
-	priv->stats.rxcrcerrmin = 0 ;
-	priv->stats.rxcrcerrmid = 0;
-	priv->stats.rxcrcerrmax = 0;
-	priv->stats.rxicverr = 0;
-
-	up(&priv->wx_sem);
-
-	return 0;
-
-}
-static int r8180_wx_radio_on(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-
-	down(&priv->wx_sem);
-	priv->rf_wakeup(dev);
-
-	up(&priv->wx_sem);
-
-	return 0;
-
-}
-
-static int r8180_wx_radio_off(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-
-	down(&priv->wx_sem);
-	priv->rf_sleep(dev);
-
-	up(&priv->wx_sem);
-
-	return 0;
-
-}
-static int r8180_wx_get_channelplan(struct net_device *dev,
-				    struct iw_request_info *info,
-				    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-
-	down(&priv->wx_sem);
-	*extra = priv->channel_plan;
-
-
-
-	up(&priv->wx_sem);
-
-	return 0;
-}
-static int r8180_wx_set_channelplan(struct net_device *dev,
-				    struct iw_request_info *info,
-				    union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int *val = (int *)extra;
-	int i;
-	printk("-----in fun %s\n", __func__);
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	/* unsigned long flags; */
-	down(&priv->wx_sem);
-	if (default_channel_plan[*val].len != 0) {
-		priv->channel_plan = *val;
-		/* Clear old channel map 8 */
-		for (i = 1; i <= MAX_CHANNEL_NUMBER; i++)
-			GET_DOT11D_INFO(priv->ieee80211)->channel_map[i] = 0;
-
-		/* Set new channel map */
-		for (i = 1; i <= default_channel_plan[*val].len; i++)
-			GET_DOT11D_INFO(priv->ieee80211)->channel_map[default_channel_plan[*val].channel[i-1]] = 1;
-
-	}
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-static int r8180_wx_get_version(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	/* struct ieee80211_device *ieee; */
-
-	down(&priv->wx_sem);
-	strcpy(extra, "1020.0808");
-	up(&priv->wx_sem);
-
-	return 0;
-}
-
-/* added by amy 080818 */
-/*receive datarate from user typing valid rate is from 2 to 108 (1 - 54M), if input 0, return to normal rate adaptive. */
-static int r8180_wx_set_forcerate(struct net_device *dev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	u8 forcerate = *extra;
-
-	down(&priv->wx_sem);
-
-	printk("==============>%s(): forcerate is %d\n", __func__, forcerate);
-	if ((forcerate == 2) || (forcerate == 4) || (forcerate == 11) || (forcerate == 22) || (forcerate == 12) ||
-		(forcerate == 18) || (forcerate == 24) || (forcerate == 36) || (forcerate == 48) || (forcerate == 72) ||
-		(forcerate == 96) || (forcerate == 108)) {
-		priv->ForcedDataRate = 1;
-		priv->ieee80211->rate = forcerate * 5;
-	}	else if (forcerate == 0)	{
-		priv->ForcedDataRate = 0;
-		printk("OK! return rate adaptive\n");
-	}	else
-			printk("ERR: wrong rate\n");
-	up(&priv->wx_sem);
-	return 0;
-}
-
-static int r8180_wx_set_enc_ext(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu, char *extra)
-{
-
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-	int ret = 0;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	ret = ieee80211_wx_set_encode_ext(priv->ieee80211, info, wrqu, extra);
-	up(&priv->wx_sem);
-	return ret;
-
-}
-static int r8180_wx_set_auth(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	int ret = 0;
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-	ret = ieee80211_wx_set_auth(priv->ieee80211, info, &wrqu->param, extra);
-	up(&priv->wx_sem);
-	return ret;
-}
-
-static int r8180_wx_set_mlme(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	int ret = 0;
-	struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-
-	down(&priv->wx_sem);
-#if 1
-	ret = ieee80211_wx_set_mlme(priv->ieee80211, info, wrqu, extra);
-#endif
-	up(&priv->wx_sem);
-	return ret;
-}
-static int r8180_wx_set_gen_ie(struct net_device *dev,
-			       struct iw_request_info *info,
-			       union iwreq_data *wrqu, char *extra)
-{
-	int ret = 0;
-		struct r8180_priv *priv = ieee80211_priv(dev);
-
-
-	if (priv->ieee80211->bHwRadioOff)
-		return 0;
-
-	down(&priv->wx_sem);
-#if 1
-	ret = ieee80211_wx_set_gen_ie(priv->ieee80211, extra, wrqu->data.length);
-#endif
-	up(&priv->wx_sem);
-	return ret;
-
-
-}
-
-static const iw_handler r8180_wx_handlers[] =	{
-	IW_HANDLER(SIOCGIWNAME,		r8180_wx_get_name),
-	IW_HANDLER(SIOCSIWNWID,		dummy),
-	IW_HANDLER(SIOCGIWNWID,		dummy),
-	IW_HANDLER(SIOCSIWFREQ,		r8180_wx_set_freq),
-	IW_HANDLER(SIOCGIWFREQ,		r8180_wx_get_freq),
-	IW_HANDLER(SIOCSIWMODE, 	r8180_wx_set_mode),
-	IW_HANDLER(SIOCGIWMODE,		r8180_wx_get_mode),
-	IW_HANDLER(SIOCSIWSENS,		r8180_wx_set_sens),
-	IW_HANDLER(SIOCGIWSENS,		r8180_wx_get_sens),
-	IW_HANDLER(SIOCGIWRANGE,	rtl8180_wx_get_range),
-	IW_HANDLER(SIOCSIWSPY,		dummy),
-	IW_HANDLER(SIOCGIWSPY,		dummy),
-	IW_HANDLER(SIOCSIWAP,		r8180_wx_set_wap),
-	IW_HANDLER(SIOCGIWAP,		r8180_wx_get_wap),
-	IW_HANDLER(SIOCSIWMLME,		r8180_wx_set_mlme),
-	IW_HANDLER(SIOCGIWAPLIST,	dummy),		/* deprecated */
-	IW_HANDLER(SIOCSIWSCAN,		r8180_wx_set_scan),
-	IW_HANDLER(SIOCGIWSCAN,		r8180_wx_get_scan),
-	IW_HANDLER(SIOCSIWESSID,	r8180_wx_set_essid),
-	IW_HANDLER(SIOCGIWESSID,	r8180_wx_get_essid),
-	IW_HANDLER(SIOCSIWNICKN,	dummy),
-	IW_HANDLER(SIOCGIWNICKN,	dummy),
-	IW_HANDLER(SIOCSIWRATE,		r8180_wx_set_rate),
-	IW_HANDLER(SIOCGIWRATE,		r8180_wx_get_rate),
-	IW_HANDLER(SIOCSIWRTS,		r8180_wx_set_rts),
-	IW_HANDLER(SIOCGIWRTS,		r8180_wx_get_rts),
-	IW_HANDLER(SIOCSIWFRAG,		r8180_wx_set_frag),
-	IW_HANDLER(SIOCGIWFRAG,		r8180_wx_get_frag),
-	IW_HANDLER(SIOCSIWTXPOW,	dummy),
-	IW_HANDLER(SIOCGIWTXPOW,	dummy),
-	IW_HANDLER(SIOCSIWRETRY,	r8180_wx_set_retry),
-	IW_HANDLER(SIOCGIWRETRY,	r8180_wx_get_retry),
-	IW_HANDLER(SIOCSIWENCODE,	r8180_wx_set_enc),
-	IW_HANDLER(SIOCGIWENCODE,	r8180_wx_get_enc),
-	IW_HANDLER(SIOCSIWPOWER,	r8180_wx_set_power),
-	IW_HANDLER(SIOCGIWPOWER,	r8180_wx_get_power),
-	IW_HANDLER(SIOCSIWGENIE,	r8180_wx_set_gen_ie),
-	IW_HANDLER(SIOCSIWAUTH,		r8180_wx_set_auth),
-	IW_HANDLER(SIOCSIWENCODEEXT,	r8180_wx_set_enc_ext),
-};
-
-static const struct iw_priv_args r8180_private_args[] = {
-	{
-		SIOCIWFIRSTPRIV + 0x0,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "badcrc"
-	},
-	{	SIOCIWFIRSTPRIV + 0x1,
-		0, 0, "dummy"
-
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x2,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "beaconint"
-	},
-	{	SIOCIWFIRSTPRIV + 0x3,
-		0, 0, "dummy"
-
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x4,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "activescan"
-
-	},
-	{	SIOCIWFIRSTPRIV + 0x5,
-		0, 0, "dummy"
-
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x6,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "rawtx"
-
-	},
-	{	SIOCIWFIRSTPRIV + 0x7,
-		0, 0, "dummy"
-
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x8,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "setiwmode"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x9,
-		0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 32, "getiwmode"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0xA,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "setpreamble"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0xB,
-		0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getpreamble"
-	},
-	{	SIOCIWFIRSTPRIV + 0xC,
-		0, 0, "dummy"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0xD,
-		0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getrssi"
-	},
-	{	SIOCIWFIRSTPRIV + 0xE,
-		0, 0, "dummy"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0xF,
-		0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getlinkqual"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x10,
-		0, 0, "resetstats"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x11,
-		0, 0, "dummy"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x12,
-		0, 0, "radioon"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x13,
-		0, 0, "radiooff"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x14,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "setchannel"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x15,
-		0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getchannel"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x16,
-		0, 0, "dummy"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x17,
-		0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 32, "getversion"
-	},
-	{
-		SIOCIWFIRSTPRIV + 0x18,
-		IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "setrate"
-	},
-};
-
-
-static iw_handler r8180_private_handler[] = {
-	r8180_wx_set_crcmon, /*SIOCIWSECONDPRIV*/
-	dummy,
-	r8180_wx_set_beaconinterval,
-	dummy,
-	/* r8180_wx_set_monitor_type, */
-	r8180_wx_set_scan_type,
-	dummy,
-	r8180_wx_set_rawtx,
-	dummy,
-	r8180_wx_set_iwmode,
-	r8180_wx_get_iwmode,
-	r8180_wx_set_preamble,
-	r8180_wx_get_preamble,
-	dummy,
-	r8180_wx_get_siglevel,
-	dummy,
-	r8180_wx_get_sigqual,
-	r8180_wx_reset_stats,
-	dummy,/* r8180_wx_get_stats */
-	r8180_wx_radio_on,
-	r8180_wx_radio_off,
-	r8180_wx_set_channelplan,
-	r8180_wx_get_channelplan,
-	dummy,
-	r8180_wx_get_version,
-	r8180_wx_set_forcerate,
-};
-
-static inline int is_same_network(struct ieee80211_network *src,
-				  struct ieee80211_network *dst,
-				  struct ieee80211_device *ieee)
-{
-		/* A network is only a duplicate if the channel, BSSID, ESSID
-		 * and the capability field (in particular IBSS and BSS) all match.
-		 * We treat all <hidden> with the same BSSID and channel
-		 * as one network
-		 */
-		if (src->channel != dst->channel)
-			return 0;
-
-		if (memcmp(src->bssid, dst->bssid, ETH_ALEN) != 0)
-			return 0;
-
-		if (ieee->iw_mode != IW_MODE_INFRA) {
-			if (src->ssid_len != dst->ssid_len)
-				return 0;
-			if (memcmp(src->ssid, dst->ssid, src->ssid_len) != 0)
-				return 0;
-		}
-
-		if ((src->capability & WLAN_CAPABILITY_IBSS) !=
-		    (dst->capability & WLAN_CAPABILITY_IBSS))
-			return 0;
-		if ((src->capability & WLAN_CAPABILITY_BSS) !=
-		    (dst->capability & WLAN_CAPABILITY_BSS))
-			return 0;
-
-		return 1;
-}
-
-/* WB modified to show signal to GUI on 18-01-2008 */
-static struct iw_statistics *r8180_get_wireless_stats(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-	struct iw_statistics *wstats = &priv->wstats;
-	int tmp_level = 0;
-	int tmp_qual = 0;
-	int tmp_noise = 0;
-
-	if (ieee->state < IEEE80211_LINKED)	{
-		wstats->qual.qual = 0;
-		wstats->qual.level = 0;
-		wstats->qual.noise = 0;
-		wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
-		return wstats;
-	}
-
-	tmp_level = (&ieee->current_network)->stats.signal;
-	tmp_qual = (&ieee->current_network)->stats.signalstrength;
-	tmp_noise = (&ieee->current_network)->stats.noise;
-
-	wstats->qual.level = tmp_level;
-	wstats->qual.qual = tmp_qual;
-	wstats->qual.noise = tmp_noise;
-	wstats->qual.updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
-	return wstats;
-}
-
-struct iw_handler_def  r8180_wx_handlers_def = {
-	.standard = r8180_wx_handlers,
-	.num_standard = ARRAY_SIZE(r8180_wx_handlers),
-	.private = r8180_private_handler,
-	.num_private = ARRAY_SIZE(r8180_private_handler),
-	.num_private_args = sizeof(r8180_private_args) / sizeof(struct iw_priv_args),
-	.get_wireless_stats = r8180_get_wireless_stats,
-	.private_args = (struct iw_priv_args *)r8180_private_args,
-};
-
-
diff --git a/drivers/staging/rtl8187se/r8180_wx.h b/drivers/staging/rtl8187se/r8180_wx.h
deleted file mode 100644
index d471520ac772..000000000000
--- a/drivers/staging/rtl8187se/r8180_wx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
-	This is part of rtl8180 OpenSource driver - v 0.3
-	Copyright (C) Andrea Merello 2004  <andrea.merello@gmail.com>
-	Released under the terms of GPL (General Public Licence)
-
-	Parts of this driver are based on the GPL part of the official realtek driver
-	Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
-	Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
-
-	We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
-*/
-
-/* this file (will) contains wireless extension handlers*/
-
-#ifndef R8180_WX_H
-#define R8180_WX_H
-#include <linux/wireless.h>
-#include "ieee80211/ieee80211.h"
-extern struct iw_handler_def r8180_wx_handlers_def;
-
-#endif
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
deleted file mode 100644
index cc6f100814f3..000000000000
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ /dev/null
@@ -1,1464 +0,0 @@
-/*
- * Copyright (c) Realtek Semiconductor Corp. All rights reserved.
- *
- * Module Name:
- *	r8185b_init.c
- *
- * Abstract:
- *	Hardware Initialization and Hardware IO for RTL8185B
- *
- * Major Change History:
- *	When		Who				What
- *	----------	---------------		-------------------------------
- *	2006-11-15	Xiong			Created
- *
- * Notes:
- *	This file is ported from RTL8185B Windows driver.
- *
- *
- */
-
-/*--------------------------Include File------------------------------------*/
-#include <linux/spinlock.h>
-#include "r8180_hw.h"
-#include "r8180.h"
-#include "r8180_rtl8225.h" /* RTL8225 Radio frontend */
-#include "r8180_93cx6.h"   /* Card EEPROM */
-#include "r8180_wx.h"
-#include "ieee80211/dot11d.h"
-/* #define CONFIG_RTL8180_IO_MAP */
-#define TC_3W_POLL_MAX_TRY_CNT 5
-
-static u8 MAC_REG_TABLE[][2] =	{
-	/*
-	 * PAGE 0:
-	 * 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in
-	 * HwConfigureRTL8185()
-	 * 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185().
-	 * 0x1F0~0x1F8  set in MacConfig_85BASIC()
-	 */
-	{0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
-	{0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
-	{0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
-	{0x94, 0x0F}, {0x95, 0x32},
-	{0x96, 0x00}, {0x97, 0x07}, {0xb4, 0x22}, {0xdb, 0x00},
-	{0xf0, 0x32}, {0xf1, 0x32}, {0xf2, 0x00}, {0xf3, 0x00}, {0xf4, 0x32},
-	{0xf5, 0x43}, {0xf6, 0x00}, {0xf7, 0x00}, {0xf8, 0x46}, {0xf9, 0xa4},
-	{0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
-	{0xff, 0x00},
-
-	/*
-	 * PAGE 1:
-	 * For Flextronics system Logo PCIHCT failure:
-	 * 0x1C4~0x1CD set no-zero value to avoid PCI configuration
-	 * space 0x45[7]=1
-	 */
-	{0x5e, 0x01},
-	{0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
-	{0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
-	{0x82, 0xFF}, {0x83, 0x03},
-	/* lzm add 080826 */
-	{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22},
-	/* lzm add 080826 */
-	{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},
-	{0xe2, 0x00},
-
-
-	/* PAGE 2: */
-	{0x5e, 0x02},
-	{0x0c, 0x04}, {0x4c, 0x30}, {0x4d, 0x08}, {0x50, 0x05}, {0x51, 0xf5},
-	{0x52, 0x04}, {0x53, 0xa0}, {0x54, 0xff}, {0x55, 0xff}, {0x56, 0xff},
-	{0x57, 0xff}, {0x58, 0x08}, {0x59, 0x08}, {0x5a, 0x08}, {0x5b, 0x08},
-	{0x60, 0x08}, {0x61, 0x08}, {0x62, 0x08}, {0x63, 0x08}, {0x64, 0x2f},
-	{0x8c, 0x3f}, {0x8d, 0x3f}, {0x8e, 0x3f},
-	{0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
-	{0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
-
-	/* PAGE 0: */
-	{0x5e, 0x00}, {0x9f, 0x03}
-	};
-
-
-static u8  ZEBRA_AGC[] = {
-	0,
-	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76,
-	0x75, 0x74, 0x73, 0x72, 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A,
-	0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0x48, 0x47, 0x46, 0x45,
-	0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
-	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
-	0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, 0x17, 0x17, 0x18, 0x18,
-	0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
-	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22,
-	0x22, 0x23, 0x23, 0x24, 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
-	0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
-	};
-
-static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
-	0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6,
-	0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057,
-	0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3,
-	0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3,
-	0x0183, 0x0163, 0x0143, 0x0123, 0x0103
-	};
-
-static u8 OFDM_CONFIG[]	= {
-	/* OFDM reg0x06[7:0]=0xFF: Enable power saving mode in RX */
-	/* OFDM reg0x3C[4]=1'b1: Enable RX power saving mode */
-	/* ofdm 0x3a = 0x7b ,(original : 0xfb) For ECS shielding room TP test */
-	/* 0x00	*/
-	0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50,
-	0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00,
-	/* 0x10	*/
-	0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26,
-	0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB,
-	/* 0x20	*/
-	0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00,
-	0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00,
-	/* 0x30	*/
-	0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e,
-	0xD8, 0x3C, 0x7B, 0x10, 0x10
-	};
-
-	/*---------------------------------------------------------------
-	 *	Hardware IO
-	 *	the code is ported from Windows source code
-	 *---------------------------------------------------------------
-	 */
-
-static u8 PlatformIORead1Byte(struct net_device *dev, u32 offset)
-{
-	return read_nic_byte(dev, offset);
-}
-
-static void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
-{
-	write_nic_byte(dev, offset, data);
-	/*
-	 * To make sure write operation is completed,
-	 * 2005.11.09, by rcnjko.
-	 */
-	read_nic_byte(dev, offset);
-}
-
-static void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
-{
-	write_nic_word(dev, offset, data);
-	/*
-	 * To make sure write operation is completed,
-	 *  2005.11.09, by rcnjko.
-	 */
-	read_nic_word(dev, offset);
-}
-
-static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
-{
-	if (offset == PhyAddr) {
-		/* For Base Band configuration. */
-		unsigned char	cmdByte;
-		unsigned long	dataBytes;
-		unsigned char	idx;
-		u8		u1bTmp;
-
-		cmdByte = (u8)(data & 0x000000ff);
-		dataBytes = data>>8;
-
-		/*
-		 *	071010, rcnjko:
-		 *	The critical section is only BB read/write race
-		 *	condition. Assumption:
-		 *	1. We assume NO one will access BB at DIRQL, otherwise,
-		 *	system will crash for
-		 *	acquiring the spinlock in such context.
-		 *	2. PlatformIOWrite4Byte() MUST NOT be recursive.
-		 */
-		/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */
-
-		for (idx = 0; idx < 30; idx++) {
-			/* Make sure command bit is clear before access it. */
-			u1bTmp = PlatformIORead1Byte(dev, PhyAddr);
-			if ((u1bTmp & BIT7) == 0)
-				break;
-			else
-				mdelay(10);
-		}
-
-		for (idx = 0; idx < 3; idx++)
-			PlatformIOWrite1Byte(dev, offset+1+idx,
-					     ((u8 *)&dataBytes)[idx]);
-
-		write_nic_byte(dev, offset, cmdByte);
-
-		/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
-	} else {
-		write_nic_dword(dev, offset, data);
-		/*
-		 * To make sure write operation is completed, 2005.11.09,
-		 *  by rcnjko.
-		 */
-		read_nic_dword(dev, offset);
-	}
-}
-
-static void SetOutputEnableOfRfPins(struct net_device *dev)
-{
-	write_nic_word(dev, RFPinsEnable, 0x1bff);
-}
-
-static bool HwHSSIThreeWire(struct net_device *dev,
-			    u8 *pDataBuf,
-			    bool write)
-{
-	u8	TryCnt;
-	u8	u1bTmp;
-
-	/* Check if WE and RE are cleared. */
-	for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
-		u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
-		if ((u1bTmp & (SW_3W_CMD1_RE|SW_3W_CMD1_WE)) == 0)
-			break;
-
-		udelay(10);
-	}
-	if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
-		netdev_err(dev,
-			   "HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n",
-			   u1bTmp);
-	return false;
-	}
-
-	/* RTL8187S HSSI Read/Write Function */
-	u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
-	u1bTmp |= RF_SW_CFG_SI; /* reg08[1]=1 Serial Interface(SI) */
-	write_nic_byte(dev, RF_SW_CONFIG, u1bTmp);
-
-	/* jong: HW SI read must set reg84[3]=0. */
-	u1bTmp = read_nic_byte(dev, RFPinsSelect);
-	u1bTmp &= ~BIT3;
-	write_nic_byte(dev, RFPinsSelect, u1bTmp);
-	/*  Fill up data buffer for write operation. */
-
-	/* SI - reg274[3:0] : RF register's Address */
-	if (write)
-		write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-	else
-		write_nic_word(dev, SW_3W_DB0, *((u16 *)pDataBuf));
-
-	/* Set up command: WE or RE. */
-	if (write)
-		write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_WE);
-	else
-		write_nic_byte(dev, SW_3W_CMD1, SW_3W_CMD1_RE);
-
-
-	/* Check if DONE is set. */
-	for (TryCnt = 0; TryCnt < TC_3W_POLL_MAX_TRY_CNT; TryCnt++) {
-		u1bTmp = read_nic_byte(dev, SW_3W_CMD1);
-		if (u1bTmp & SW_3W_CMD1_DONE)
-			break;
-
-		udelay(10);
-	}
-
-	write_nic_byte(dev, SW_3W_CMD1, 0);
-
-	/* Read back data for read operation. */
-	if (!write) {
-		/* Serial Interface : reg363_362[11:0] */
-		*((u16 *)pDataBuf) = read_nic_word(dev, SI_DATA_READ);
-		*((u16 *)pDataBuf) &= 0x0FFF;
-	}
-
-	return true;
-}
-
-void RF_WriteReg(struct net_device *dev, u8 offset, u16 data)
-{
-	u16 reg = (data << 4) | (offset & 0x0f);
-	HwHSSIThreeWire(dev, (u8 *)&reg, true);
-}
-
-u16 RF_ReadReg(struct net_device *dev, u8 offset)
-{
-	u16 reg = offset & 0x0f;
-	HwHSSIThreeWire(dev, (u8 *)&reg, false);
-	return reg;
-}
-
-static u8 ReadBBPortUchar(struct net_device *dev, u32 addr)
-{
-	PlatformIOWrite4Byte(dev, PhyAddr, addr & 0xffffff7f);
-	return PlatformIORead1Byte(dev, PhyDataR);
-}
-
-/* by Owen on 04/07/14 for writing BB register successfully */
-static void WriteBBPortUchar(struct net_device *dev, u32 Data)
-{
-	PlatformIOWrite4Byte(dev, PhyAddr, Data);
-	ReadBBPortUchar(dev, Data);
-}
-
-/*
- *	Description:
- *	Perform Antenna settings with antenna diversity on 87SE.
- *		Created by Roger, 2008.01.25.
- */
-bool SetAntennaConfig87SE(struct net_device *dev,
-			  u8   DefaultAnt, /* 0: Main, 1: Aux. */
-			  bool bAntDiversity) /* 1:Enable, 0: Disable. */
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool   bAntennaSwitched = true;
-	/* 0x00 = disabled, 0x80 = enabled */
-	u8	ant_diversity_offset = 0x00;
-
-	/*
-	 * printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n",
-	 * DefaultAnt, bAntDiversity);
-	 */
-
-	/* Threshold for antenna diversity. */
-	write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */
-
-	if (bAntDiversity)	/*	Enable Antenna Diversity. */
-		ant_diversity_offset = 0x80;
-
-	if (DefaultAnt == 1) { /* aux Antenna */
-		/* Mac register, aux antenna */
-		write_nic_byte(dev, ANTSEL, 0x00);
-
-		/* Config CCK RX antenna. */
-		write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
-
-		/* Reg01 : 47 | ant_diversity_offset */
-		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
-
-		/* Config OFDM RX antenna. */
-		write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
-		/* Reg18 : 32 */
-		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
-	} else { /* main Antenna */
-		/* Mac register, main antenna */
-		write_nic_byte(dev, ANTSEL, 0x03);
-
-		/* Config CCK RX antenna.	*/
-		write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
-		/* Reg01 : 47 */
-		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
-
-		/* Config OFDM RX antenna. */
-		write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
-		/*Reg18 : 32 */
-		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
-	}
-	priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
-	return	bAntennaSwitched;
-}
-/*
- *--------------------------------------------------------------
- *		Hardware Initialization.
- *		the code is ported from Windows source code
- *--------------------------------------------------------------
- */
-
-static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
-{
-
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u32			i;
-	u32	addr, data;
-	u32 u4bRegOffset, u4bRegValue;
-	u16 u4bRF23, u4bRF24;
-	u8			u1b24E;
-	int d_cut = 0;
-
-
-/*
- *===========================================================================
- *	87S_PCIE :: RADIOCFG.TXT
- *===========================================================================
- */
-
-
-	/* Page1 : reg16-reg30 */
-	RF_WriteReg(dev, 0x00, 0x013f);		mdelay(1); /* switch to page1 */
-	u4bRF23 = RF_ReadReg(dev, 0x08);	mdelay(1);
-	u4bRF24 = RF_ReadReg(dev, 0x09);	mdelay(1);
-
-	if (u4bRF23 == 0x818 && u4bRF24 == 0x70C) {
-		d_cut = 1;
-		netdev_info(dev, "card type changed from C- to D-cut\n");
-	}
-
-	/* Page0 : reg0-reg15 */
-
-	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1);/* 1	*/
-	RF_WriteReg(dev, 0x01, 0x06e0);		mdelay(1);
-	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1);/* 2	*/
-	RF_WriteReg(dev, 0x03, 0x07f1);		mdelay(1);/* 3	*/
-	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1);
-	RF_WriteReg(dev, 0x05, 0x0c72);		mdelay(1);
-	RF_WriteReg(dev, 0x06, 0x0ae6);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x00ca);		mdelay(1);
-	RF_WriteReg(dev, 0x08, 0x0e1c);		mdelay(1);
-	RF_WriteReg(dev, 0x09, 0x02f0);		mdelay(1);
-	RF_WriteReg(dev, 0x0a, 0x09d0);		mdelay(1);
-	RF_WriteReg(dev, 0x0b, 0x01ba);		mdelay(1);
-	RF_WriteReg(dev, 0x0c, 0x0640);		mdelay(1);
-	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1);
-	RF_WriteReg(dev, 0x0e, 0x0020);		mdelay(1);
-	RF_WriteReg(dev, 0x0f, 0x0990);		mdelay(1);
-
-	/*  Page1 : reg16-reg30 */
-	RF_WriteReg(dev, 0x00, 0x013f);		mdelay(1);
-	RF_WriteReg(dev, 0x03, 0x0806);		mdelay(1);
-	RF_WriteReg(dev, 0x04, 0x03a7);		mdelay(1);
-	RF_WriteReg(dev, 0x05, 0x059b);		mdelay(1);
-	RF_WriteReg(dev, 0x06, 0x0081);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x01A0);		mdelay(1);
-/*
- * Don't write RF23/RF24 to make a difference between 87S C cut and D cut.
- * asked by SD3 stevenl.
- */
-	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
-	RF_WriteReg(dev, 0x0b, 0x0418);		mdelay(1);
-
-	if (d_cut) {
-		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
-		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-		/* RX LO buffer */
-		RF_WriteReg(dev, 0x0e, 0x0807);		mdelay(1);
-	} else {
-		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
-		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-		/* RX LO buffer */
-		RF_WriteReg(dev, 0x0e, 0x0806);		mdelay(1);
-	}
-
-	RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
-	RF_WriteReg(dev, 0x00, 0x01d7);		mdelay(1); /* 6 */
-	RF_WriteReg(dev, 0x03, 0x0e00);		mdelay(1);
-	RF_WriteReg(dev, 0x04, 0x0e50);		mdelay(1);
-
-	for (i = 0; i <= 36; i++) {
-		RF_WriteReg(dev, 0x01, i);		mdelay(1);
-		RF_WriteReg(dev, 0x02, ZEBRA_RF_RX_GAIN_TABLE[i]); mdelay(1);
-	}
-
-	RF_WriteReg(dev, 0x05, 0x0203);		mdelay(1); /* 203, 343 */
-	RF_WriteReg(dev, 0x06, 0x0200);		mdelay(1); /* 400 */
-	/* switch to reg16-reg30, and HSSI disable 137 */
-	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
-
-	/* Z4 synthesizer loop filter setting, 392 */
-	RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
-
-	/* switch to reg0-reg15, and HSSI disable */
-	RF_WriteReg(dev, 0x00, 0x0037);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
-
-	/* CBC on, Tx Rx disable, High gain */
-	RF_WriteReg(dev, 0x04, 0x0160);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
-
-	/* Z4 setted channel 1 */
-	RF_WriteReg(dev, 0x07, 0x0080);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
-
-	RF_WriteReg(dev, 0x02, 0x088D);		mdelay(1); /* LC calibration */
-	mdelay(200); /* Deay 200 ms. */		/* 0xfd	*/
-	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
-	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
-
-	/* switch to reg16-reg30 137, and HSSI disable 137 */
-	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1);
-	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
-
-	RF_WriteReg(dev, 0x07, 0x0000);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x0180);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x0220);		mdelay(1);
-	RF_WriteReg(dev, 0x07, 0x03E0);		mdelay(1);
-
-	/* DAC calibration off 20070702	*/
-	RF_WriteReg(dev, 0x06, 0x00c1);		mdelay(1);
-	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
-	/* For crystal calibration, added by Roger, 2007.12.11. */
-	if (priv->bXtalCalibration) { /* reg 30.	*/
-	 /*
-	  *	enable crystal calibration.
-	  *	RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
-	  *	(2)PA Pwr delay timer[15:14], default: 2.4us,
-	  *	set BIT15=0
-	  *	(3)RF signal on/off when calibration[13], default: on,
-	  *	set BIT13=0.
-	  *	So we should minus 4 BITs offset.
-	  */
-		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) |
-			    (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
-		netdev_info(dev, "ZEBRA_Config_85BASIC_HardCode(): (%02x)\n",
-		      (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) |
-		       BIT11 | BIT9);
-	} else {
-		/* using default value. Xin=6, Xout=6.	*/
-		RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
-	}
-	/* switch to reg0-reg15, and HSSI enable */
-	RF_WriteReg(dev, 0x00, 0x00bf);		mdelay(1);
-	/* Rx BB start calibration, 00c//+edward */
-	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1);
-	/* temperature meter off */
-	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1);
-	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1); /* Rx mode */
-	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x00, 0x0197);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x05, 0x05ab);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x01, 0x0000);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x02, 0x0000);		mdelay(1);
-	/* power save parameters. */
-	u1b24E = read_nic_byte(dev, 0x24E);
-	write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6))));
-
-	/*======================================================================
-	 *
-	 *======================================================================
-	 * CCKCONF.TXT
-	 *======================================================================
-	 *
-	 *	[POWER SAVE] Power Saving Parameters by jong. 2007-11-27
-	 *	CCK reg0x00[7]=1'b1 :power saving for TX (default)
-	 *	CCK reg0x00[6]=1'b1: power saving for RX (default)
-	 *	CCK reg0x06[4]=1'b1: turn off channel estimation related
-	 *	circuits if not doing channel estimation.
-	 *	CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
-	 *	CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
-	 */
-
-	write_phy_cck(dev, 0x00, 0xc8);
-	write_phy_cck(dev, 0x06, 0x1c);
-	write_phy_cck(dev, 0x10, 0x78);
-	write_phy_cck(dev, 0x2e, 0xd0);
-	write_phy_cck(dev, 0x2f, 0x06);
-	write_phy_cck(dev, 0x01, 0x46);
-
-	/* power control */
-	write_nic_byte(dev, CCK_TXAGC, 0x10);
-	write_nic_byte(dev, OFDM_TXAGC, 0x1B);
-	write_nic_byte(dev, ANTSEL, 0x03);
-
-
-
-	/*
-	 *======================================================================
-	 *	AGC.txt
-	 *======================================================================
-	 */
-
-	write_phy_ofdm(dev, 0x00, 0x12);
-
-	for (i = 0; i < 128; i++) {
-
-		data = ZEBRA_AGC[i+1];
-		data = data << 8;
-		data = data | 0x0000008F;
-
-		addr = i + 0x80; /* enable writing AGC table */
-		addr = addr << 8;
-		addr = addr | 0x0000008E;
-
-		WriteBBPortUchar(dev, data);
-		WriteBBPortUchar(dev, addr);
-		WriteBBPortUchar(dev, 0x0000008E);
-	}
-
-	PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080);	/* Annie, 2006-05-05 */
-
-	/*
-	 *======================================================================
-	 *
-	 *======================================================================
-	 * OFDMCONF.TXT
-	 *======================================================================
-	 */
-
-	for (i = 0; i < 60; i++) {
-		u4bRegOffset = i;
-		u4bRegValue = OFDM_CONFIG[i];
-
-		WriteBBPortUchar(dev,
-				(0x00000080 |
-				(u4bRegOffset & 0x7f) |
-				((u4bRegValue & 0xff) << 8)));
-	}
-
-	/*
-	 *======================================================================
-	 * by amy for antenna
-	 *======================================================================
-	 */
-	/*
-	 * Config Sw/Hw  Combinational Antenna Diversity. Added by Roger,
-	 * 2008.02.26.
-	 */
-	SetAntennaConfig87SE(dev, priv->bDefaultAntenna1,
-			     priv->bSwAntennaDiverity);
-}
-
-
-void UpdateInitialGain(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	/* lzm add 080826 */
-	if (priv->eRFPowerState != RF_ON) {
-		/*	Don't access BB/RF under disable PLL situation.
-		 *	RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain -
-		 *	pHalData->eRFPowerState!=RF_ON\n"));
-		 *	Back to the original state
-		 */
-		priv->InitialGain = priv->InitialGainBackUp;
-		return;
-	}
-
-	switch (priv->InitialGain) {
-	case 1: /* m861dBm */
-		write_phy_ofdm(dev, 0x17, 0x26);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfa);	mdelay(1);
-		break;
-
-	case 2: /* m862dBm */
-		write_phy_ofdm(dev, 0x17, 0x36);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfa);	mdelay(1);
-		break;
-
-	case 3: /* m863dBm */
-		write_phy_ofdm(dev, 0x17, 0x36);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfb);	mdelay(1);
-		break;
-
-	case 4: /* m864dBm */
-		write_phy_ofdm(dev, 0x17, 0x46);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfb);	mdelay(1);
-		break;
-
-	case 5: /* m82dBm */
-		write_phy_ofdm(dev, 0x17, 0x46);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x96);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfb);	mdelay(1);
-		break;
-
-	case 6: /* m78dBm */
-		write_phy_ofdm(dev, 0x17, 0x56);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x96);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfc);	mdelay(1);
-		break;
-
-	case 7: /* m74dBm */
-		write_phy_ofdm(dev, 0x17, 0x56);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0xa6);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfc);	mdelay(1);
-		break;
-
-	case 8:
-		write_phy_ofdm(dev, 0x17, 0x66);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0xb6);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfc);	mdelay(1);
-		break;
-
-	default: /* MP */
-		write_phy_ofdm(dev, 0x17, 0x26);	mdelay(1);
-		write_phy_ofdm(dev, 0x24, 0x86);	mdelay(1);
-		write_phy_ofdm(dev, 0x05, 0xfa);	mdelay(1);
-		break;
-	}
-}
-/*
- *	Description:
- *		Tx Power tracking mechanism routine on 87SE.
- *	Created by Roger, 2007.12.11.
- */
-static void InitTxPwrTracking87SE(struct net_device *dev)
-{
-	u32	u4bRfReg;
-
-	u4bRfReg = RF_ReadReg(dev, 0x02);
-
-	/* Enable Thermal meter indication.	*/
-	RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);		mdelay(1);
-}
-
-static void PhyConfig8185(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-		write_nic_dword(dev, RCR, priv->ReceiveConfig);
-	   priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03;
-	/*  RF config */
-	ZEBRA_Config_85BASIC_HardCode(dev);
-	/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce,
-	 * 2007-06-06.
-	 */
-	if (priv->bDigMechanism) {
-		if (priv->InitialGain == 0)
-			priv->InitialGain = 4;
-	}
-
-	/*
-	 *	Enable thermal meter indication to implement TxPower tracking
-	 *	on 87SE. We initialize thermal meter here to avoid unsuccessful
-	 *	configuration. Added by Roger, 2007.12.11.
-	 */
-	if (priv->bTxPowerTrack)
-		InitTxPwrTracking87SE(dev);
-
-	priv->InitialGainBackUp = priv->InitialGain;
-	UpdateInitialGain(dev);
-
-	return;
-}
-
-static void HwConfigureRTL8185(struct net_device *dev)
-{
-	/*
-	 * RTL8185_TODO: Determine Retrylimit, TxAGC,
-	 * AutoRateFallback control.
-	 */
-	u8 bUNIVERSAL_CONTROL_RL = 0;
-	u8 bUNIVERSAL_CONTROL_AGC = 1;
-	u8 bUNIVERSAL_CONTROL_ANT = 1;
-	u8 bAUTO_RATE_FALLBACK_CTL = 1;
-	u8 val8;
-	write_nic_word(dev, BRSR, 0x0fff);
-	/* Retry limit */
-	val8 = read_nic_byte(dev, CW_CONF);
-
-	if (bUNIVERSAL_CONTROL_RL)
-		val8 = val8 & 0xfd;
-	else
-		val8 = val8 | 0x02;
-
-	write_nic_byte(dev, CW_CONF, val8);
-
-	/* Tx AGC */
-	val8 = read_nic_byte(dev, TXAGC_CTL);
-	if (bUNIVERSAL_CONTROL_AGC) {
-		write_nic_byte(dev, CCK_TXAGC, 128);
-		write_nic_byte(dev, OFDM_TXAGC, 128);
-		val8 = val8 & 0xfe;
-	} else {
-		val8 = val8 | 0x01;
-	}
-
-
-	write_nic_byte(dev, TXAGC_CTL, val8);
-
-	/* Tx Antenna including Feedback control */
-	val8 = read_nic_byte(dev, TXAGC_CTL);
-
-	if (bUNIVERSAL_CONTROL_ANT) {
-		write_nic_byte(dev, ANTSEL, 0x00);
-		val8 = val8 & 0xfd;
-	} else {
-		val8 = val8 & (val8|0x02); /* xiong-2006-11-15 */
-	}
-
-	write_nic_byte(dev, TXAGC_CTL, val8);
-
-	/* Auto Rate fallback control	*/
-	val8 = read_nic_byte(dev, RATE_FALLBACK);
-	val8 &= 0x7c;
-	if (bAUTO_RATE_FALLBACK_CTL) {
-		val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;
-
-		/* <RJ_TODO_8185B> We shall set up the ARFR according
-		 * to user's setting.
-		 */
-		PlatformIOWrite2Byte(dev, ARFR, 0x0fff); /* set 1M ~ 54Mbps. */
-	}
-	write_nic_byte(dev, RATE_FALLBACK, val8);
-}
-
-static void MacConfig_85BASIC_HardCode(struct net_device *dev)
-{
-	/*
-	 *======================================================================
-	 * MACREG.TXT
-	 *======================================================================
-	 */
-	int nLinesRead = 0;
-	u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
-	int i;
-
-	nLinesRead = sizeof(MAC_REG_TABLE)/2;
-
-	for (i = 0; i < nLinesRead; i++) { /* nLinesRead=101 */
-		u4bRegOffset = MAC_REG_TABLE[i][0];
-		u4bRegValue = MAC_REG_TABLE[i][1];
-
-				if (u4bRegOffset == 0x5e)
-					u4bPageIndex = u4bRegValue;
-				else
-					u4bRegOffset |= (u4bPageIndex << 8);
-
-		write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
-	}
-	/* ================================================================= */
-}
-
-static void MacConfig_85BASIC(struct net_device *dev)
-{
-
-	u8			u1DA;
-	MacConfig_85BASIC_HardCode(dev);
-
-	/* ================================================================= */
-
-	/* Follow TID_AC_MAP of WMac. */
-	write_nic_word(dev, TID_AC_MAP, 0xfa50);
-
-	/* Interrupt Migration, Jong suggested we use set 0x0000 first,
-	 * 2005.12.14, by rcnjko.
-	 */
-	write_nic_word(dev, IntMig, 0x0000);
-
-	/* Prevent TPC to cause CRC error. Added by Annie, 2006-06-10. */
-	PlatformIOWrite4Byte(dev, 0x1F0, 0x00000000);
-	PlatformIOWrite4Byte(dev, 0x1F4, 0x00000000);
-	PlatformIOWrite1Byte(dev, 0x1F8, 0x00);
-
-	/* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
-
-	/*
-	 *  power save parameter based on
-	 * "87SE power save parameters 20071127.doc", as follow.
-	 */
-
-	/* Enable DA10 TX power saving */
-	u1DA = read_nic_byte(dev, PHYPR);
-	write_nic_byte(dev, PHYPR, (u1DA | BIT2));
-
-	/* POWER: */
-	write_nic_word(dev, 0x360, 0x1000);
-	write_nic_word(dev, 0x362, 0x1000);
-
-	/* AFE. */
-	write_nic_word(dev, 0x370, 0x0560);
-	write_nic_word(dev, 0x372, 0x0560);
-	write_nic_word(dev, 0x374, 0x0DA4);
-	write_nic_word(dev, 0x376, 0x0DA4);
-	write_nic_word(dev, 0x378, 0x0560);
-	write_nic_word(dev, 0x37A, 0x0560);
-	write_nic_word(dev, 0x37C, 0x00EC);
-	write_nic_word(dev, 0x37E, 0x00EC); /* +edward */
-	write_nic_byte(dev, 0x24E, 0x01);
-}
-
-static u8 GetSupportedWirelessMode8185(struct net_device *dev)
-{
-	return WIRELESS_MODE_B | WIRELESS_MODE_G;
-}
-
-static void
-ActUpdateChannelAccessSetting(struct net_device *dev,
-			      enum wireless_mode mode,
-			      struct chnl_access_setting *chnl_access_setting)
-{
-	AC_CODING	eACI;
-
-	/*
-	 *	<RJ_TODO_8185B>
-	 *	TODO: We still don't know how to set up these registers,
-	 *	just follow WMAC to verify 8185B FPAG.
-	 *
-	 *	<RJ_TODO_8185B>
-	 *	Jong said CWmin/CWmax register are not functional in 8185B,
-	 *	so we shall fill channel access realted register into AC
-	 *	parameter registers,
-	 *	even in nQBss.
-	 */
-
-	/* Suggested by Jong, 2005.12.08. */
-	chnl_access_setting->sifs_timer = 0x22;
-	chnl_access_setting->difs_timer = 0x1C; /* 2006.06.02, by rcnjko. */
-	chnl_access_setting->slot_time_timer = 9; /* 2006.06.02, by rcnjko. */
-	/*
-	 * Suggested by wcchu, it is the default value of EIFS register,
-	 * 2005.12.08.
-	 */
-	chnl_access_setting->eifs_timer = 0x5B;
-	chnl_access_setting->cwmin_index = 3; /* 2006.06.02, by rcnjko. */
-	chnl_access_setting->cwmax_index = 7; /* 2006.06.02, by rcnjko. */
-
-	write_nic_byte(dev, SIFS, chnl_access_setting->sifs_timer);
-	/*
-	 * Rewrited from directly use PlatformEFIOWrite1Byte(),
-	 * by Annie, 2006-03-29.
-	 */
-	write_nic_byte(dev, SLOT, chnl_access_setting->slot_time_timer);
-
-	write_nic_byte(dev, EIFS, chnl_access_setting->eifs_timer);
-
-	/*
-	 * <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS
-	 * register, 2005.12.08.
-	 */
-	write_nic_byte(dev, AckTimeOutReg, 0x5B);
-
-	for (eACI = 0; eACI < AC_MAX; eACI++)
-		write_nic_byte(dev, ACM_CONTROL, 0);
-}
-
-static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
-{
-	struct  r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	struct  ieee80211_device *ieee = priv->ieee80211;
-	u8	btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);
-
-	if ((btWirelessMode & btSupportedWirelessMode) == 0)	{
-		/*
-		 * Don't switch to unsupported wireless mode, 2006.02.15,
-		 * by rcnjko.
-		 */
-		DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n",
-			btWirelessMode, btSupportedWirelessMode);
-		return;
-	}
-
-	/* 1. Assign wireless mode to switch if necessary. */
-	if (btWirelessMode == WIRELESS_MODE_AUTO) {
-		if ((btSupportedWirelessMode & WIRELESS_MODE_A)) {
-			btWirelessMode = WIRELESS_MODE_A;
-		} else if (btSupportedWirelessMode & WIRELESS_MODE_G) {
-				btWirelessMode = WIRELESS_MODE_G;
-
-		} else if ((btSupportedWirelessMode & WIRELESS_MODE_B))	{
-				btWirelessMode = WIRELESS_MODE_B;
-		} else {
-			DMESGW("ActSetWirelessMode8185(): No valid wireless mode supported, btSupportedWirelessMode(%x)!!!\n",
-			       btSupportedWirelessMode);
-			btWirelessMode = WIRELESS_MODE_B;
-		}
-	}
-
-	/*
-	 * 2. Swtich band: RF or BB specific actions,
-	 * for example, refresh tables in omc8255, or change initial gain if
-	 * necessary. Nothing to do for Zebra to switch band. Update current
-	 * wireless mode if we switch to specified band successfully.
-	 */
-
-	ieee->mode = (enum wireless_mode)btWirelessMode;
-
-	/* 3. Change related setting. */
-	if (ieee->mode == WIRELESS_MODE_A)
-		DMESG("WIRELESS_MODE_A\n");
-	else if (ieee->mode == WIRELESS_MODE_B)
-		DMESG("WIRELESS_MODE_B\n");
-	else if (ieee->mode == WIRELESS_MODE_G)
-		DMESG("WIRELESS_MODE_G\n");
-
-	ActUpdateChannelAccessSetting(dev, ieee->mode,
-				      &priv->ChannelAccessSetting);
-}
-
-void rtl8185b_irq_enable(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	priv->irq_enabled = 1;
-	write_nic_dword(dev, IMR, priv->IntrMask);
-}
-
-static void MgntDisconnectIBSS(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u8 i;
-
-	for (i = 0; i < 6; i++)
-		priv->ieee80211->current_network.bssid[i] = 0x55;
-
-
-
-	priv->ieee80211->state = IEEE80211_NOLINK;
-	/*
-	 *	Stop Beacon.
-	 *
-	 *	Vista add a Adhoc profile, HW radio off until
-	 *	OID_DOT11_RESET_REQUEST Driver would set MSR=NO_LINK,
-	 *	then HW Radio ON, MgntQueue Stuck. Because Bcn DMA isn't
-	 *	complete, mgnt queue would stuck until Bcn packet send.
-	 *
-	 *	Disable Beacon Queue Own bit, suggested by jong
-	 */
-	ieee80211_stop_send_beacons(priv->ieee80211);
-
-	priv->ieee80211->link_change(dev);
-	notify_wx_assoc_event(priv->ieee80211);
-}
-
-static void MlmeDisassociateRequest(struct net_device *dev, u8 *asSta, u8 asRsn)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	u8 i;
-
-	SendDisassociation(priv->ieee80211, asSta, asRsn);
-
-	if (memcmp(priv->ieee80211->current_network.bssid, asSta, 6) == 0) {
-		/* ShuChen TODO: change media status. */
-
-		for (i = 0; i < 6; i++)
-			priv->ieee80211->current_network.bssid[i] = 0x22;
-
-		ieee80211_disassociate(priv->ieee80211);
-	}
-}
-
-static void MgntDisconnectAP(struct net_device *dev, u8 asRsn)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	/*
-	 * Commented out by rcnjko, 2005.01.27:
-	 * I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
-	 *
-	 *	2004/09/15, kcwu, the key should be cleared, or the new
-	 *	handshaking will not success
-	 *
-	 *	In WPA WPA2 need to Clear all key ... because new key will set
-	 *	after new handshaking. 2004.10.11, by rcnjko.
-	 */
-	MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid,
-				asRsn);
-
-	priv->ieee80211->state = IEEE80211_NOLINK;
-}
-
-static bool MgntDisconnect(struct net_device *dev, u8 asRsn)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	/*
-	 *	Schedule an workitem to wake up for ps mode, 070109, by rcnjko.
-	 */
-
-	if (IS_DOT11D_ENABLE(priv->ieee80211))
-		Dot11d_Reset(priv->ieee80211);
-	/* In adhoc mode, update beacon frame. */
-	if (priv->ieee80211->state == IEEE80211_LINKED)	{
-		if (priv->ieee80211->iw_mode == IW_MODE_ADHOC)
-			MgntDisconnectIBSS(dev);
-
-		if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
-			/*
-			 *	We clear key here instead of MgntDisconnectAP()
-			 *	because that MgntActSet_802_11_DISASSOCIATE()
-			 *	is an interface called by OS, e.g.
-			 *	OID_802_11_DISASSOCIATE in Windows while as
-			 *	MgntDisconnectAP() is used to handle
-			 *	disassociation related things to AP, e.g. send
-			 *	Disassoc frame to AP.  2005.01.27, by rcnjko.
-			 */
-			MgntDisconnectAP(dev, asRsn);
-		}
-		/* Indicate Disconnect, 2005.02.23, by rcnjko.	*/
-	}
-	return true;
-}
-/*
- *	Description:
- *		Chang RF Power State.
- *		Note that, only MgntActSet_RF_State() is allowed to set
- *		HW_VAR_RF_STATE.
- *
- *	Assumption:
- *		PASSIVE LEVEL.
- */
-static bool SetRFPowerState(struct net_device *dev,
-			    enum rt_rf_power_state eRFPowerState)
-{
-	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool	bResult = false;
-
-	if (eRFPowerState == priv->eRFPowerState)
-		return bResult;
-
-	bResult = SetZebraRFPowerState8185(dev, eRFPowerState);
-
-	return bResult;
-}
-
-bool MgntActSet_RF_State(struct net_device *dev, enum rt_rf_power_state StateToSet,
-			 u32 ChangeSource)
-{
-	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	bool	bActionAllowed = false;
-	bool	bConnectBySSID = false;
-	enum rt_rf_power_state rtState;
-	u16	RFWaitCounter = 0;
-	unsigned long flag;
-	/*
-	 *	Prevent the race condition of RF state change. By Bruce,
-	 *	2007-11-28. Only one thread can change the RF state at one time,
-	 *	and others should wait to be executed.
-	 */
-	while (true) {
-		spin_lock_irqsave(&priv->rf_ps_lock, flag);
-		if (priv->RFChangeInProgress) {
-			spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
-			/*  Set RF after the previous action is done.	*/
-			while (priv->RFChangeInProgress) {
-				RFWaitCounter++;
-				udelay(1000); /* 1 ms	*/
-
-				/*
-				 *	Wait too long, return FALSE to avoid
-				 *	to be stuck here.
-				 */
-				if (RFWaitCounter > 1000) { /* 1sec */
-					netdev_info(dev, "MgntActSet_RF_State(): Wait too long to set RF\n");
-					/* TODO: Reset RF state? */
-					return false;
-				}
-			}
-		} else {
-			priv->RFChangeInProgress = true;
-			spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
-			break;
-		}
-	}
-	rtState = priv->eRFPowerState;
-
-	switch (StateToSet) {
-	case RF_ON:
-		/*
-		 *	Turn On RF no matter the IPS setting because we need to
-		 *	update the RF state to Ndis under Vista, or the Windows
-		 *	does not allow the driver to perform site survey any
-		 *	more. By Bruce, 2007-10-02.
-		 */
-		priv->RfOffReason &= (~ChangeSource);
-
-		if (!priv->RfOffReason)	{
-			priv->RfOffReason = 0;
-			bActionAllowed = true;
-
-			if (rtState == RF_OFF &&
-			    ChangeSource >= RF_CHANGE_BY_HW)
-				bConnectBySSID = true;
-		}
-		break;
-
-	case RF_OFF:
-		 /* 070125, rcnjko: we always keep connected in AP mode. */
-
-		if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
-			/*
-			 *	060808, Annie:
-			 *	Disconnect to current BSS when radio off.
-			 *	Asked by QuanTa.
-			 *
-			 *	Calling MgntDisconnect() instead of
-			 *	MgntActSet_802_11_DISASSOCIATE(), because
-			 *	we do NOT need to set ssid to dummy ones.
-			 */
-			MgntDisconnect(dev, disas_lv_ss);
-			/*
-			 *	Clear content of bssDesc[] and bssDesc4Query[]
-			 *	to avoid reporting old bss to UI.
-			 */
-		}
-
-		priv->RfOffReason |= ChangeSource;
-		bActionAllowed = true;
-		break;
-	case RF_SLEEP:
-		priv->RfOffReason |= ChangeSource;
-		bActionAllowed = true;
-		break;
-	default:
-		break;
-	}
-
-	if (bActionAllowed) {
-		/* Config HW to the specified mode. */
-		SetRFPowerState(dev, StateToSet);
-	}
-
-	/* Release RF spinlock	*/
-	spin_lock_irqsave(&priv->rf_ps_lock, flag);
-	priv->RFChangeInProgress = false;
-	spin_unlock_irqrestore(&priv->rf_ps_lock, flag);
-	return bActionAllowed;
-}
-
-static void InactivePowerSave(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	/*
-	 *	This flag "bSwRfProcessing", indicates the status of IPS
-	 *	procedure, should be set if the IPS workitem is really
-	 *	scheduled. The old code, sets this flag before scheduling the
-	 *	IPS workitem and however, at the same time the previous IPS
-	 *	workitem did not end yet, fails to schedule the current
-	 *	workitem. Thus, bSwRfProcessing blocks the IPS procedure of
-	 *	switching RF.
-	 */
-	priv->bSwRfProcessing = true;
-
-	MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS);
-
-	/*
-	 *	To solve CAM values miss in RF OFF, rewrite CAM values after
-	 *	RF ON. By Bruce, 2007-09-20.
-	 */
-
-	priv->bSwRfProcessing = false;
-}
-
-/*
- *	Description:
- *		Enter the inactive power save mode. RF will be off
- */
-void IPSEnter(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	enum rt_rf_power_state rtState;
-	if (priv->bInactivePs) {
-		rtState = priv->eRFPowerState;
-
-		/*
-		 *	Do not enter IPS in the following conditions:
-		 *	(1) RF is already OFF or
-		 *	Sleep (2) bSwRfProcessing (indicates the IPS is still
-		 *	under going) (3) Connected (only disconnected can
-		 *	trigger IPS)(4) IBSS (send Beacon)
-		 *	(5) AP mode (send Beacon)
-		 */
-		if (rtState == RF_ON && !priv->bSwRfProcessing
-			&& (priv->ieee80211->state != IEEE80211_LINKED)) {
-			priv->eInactivePowerState = RF_OFF;
-			InactivePowerSave(dev);
-		}
-	}
-}
-void IPSLeave(struct net_device *dev)
-{
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-	enum rt_rf_power_state rtState;
-	if (priv->bInactivePs) {
-		rtState = priv->eRFPowerState;
-		if ((rtState == RF_OFF || rtState == RF_SLEEP) &&
-		    !priv->bSwRfProcessing
-		    && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
-			priv->eInactivePowerState = RF_ON;
-			InactivePowerSave(dev);
-		}
-	}
-}
-
-void rtl8185b_adapter_start(struct net_device *dev)
-{
-	struct r8180_priv *priv = ieee80211_priv(dev);
-	struct ieee80211_device *ieee = priv->ieee80211;
-
-	u8 SupportedWirelessMode;
-	u8 InitWirelessMode;
-	u8 bInvalidWirelessMode = 0;
-	u8 tmpu8;
-	u8 btCR9346;
-	u8 TmpU1b;
-	u8 btPSR;
-
-	write_nic_byte(dev, 0x24e, (BIT5|BIT6|BIT0));
-	rtl8180_reset(dev);
-
-	priv->dma_poll_mask = 0;
-	priv->dma_poll_stop_mask = 0;
-
-	HwConfigureRTL8185(dev);
-	write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
-	write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
-	/* default network type to 'No Link' */
-	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3);
-	write_nic_word(dev, BcnItv, 100);
-	write_nic_word(dev, AtimWnd, 2);
-	PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
-	write_nic_byte(dev, WPA_CONFIG, 0);
-	MacConfig_85BASIC(dev);
-	/* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07,
-	 * by rcnjko.
-	 */
-	/* BT_DEMO_BOARD type */
-	PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);
-
-	/*
-	 *---------------------------------------------------------------------
-	 *	Set up PHY related.
-	 *---------------------------------------------------------------------
-	 */
-	/* Enable Config3.PARAM_En to revise AnaaParm. */
-	write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
-	tmpu8 = read_nic_byte(dev, CONFIG3);
-	write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En));
-	/* Turn on Analog power. */
-	/* Asked for by William, otherwise, MAC 3-wire can't work,
-	 * 2006.06.27, by rcnjko.
-	 */
-	write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
-	write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
-	write_nic_word(dev, ANAPARAM3, 0x0010);
-
-	write_nic_byte(dev, CONFIG3, tmpu8);
-	write_nic_byte(dev, CR9346, 0x00);
-	/* enable EEM0 and EEM1 in 9346CR */
-	btCR9346 = read_nic_byte(dev, CR9346);
-	write_nic_byte(dev, CR9346, (btCR9346 | 0xC0));
-
-	/* B cut use LED1 to control HW RF on/off */
-	TmpU1b = read_nic_byte(dev, CONFIG5);
-	TmpU1b = TmpU1b & ~BIT3;
-	write_nic_byte(dev, CONFIG5, TmpU1b);
-
-	/* disable EEM0 and EEM1 in 9346CR */
-	btCR9346 &= ~(0xC0);
-	write_nic_byte(dev, CR9346, btCR9346);
-
-	/* Enable Led (suggested by Jong) */
-	/* B-cut RF Radio on/off  5e[3]=0 */
-	btPSR = read_nic_byte(dev, PSR);
-	write_nic_byte(dev, PSR, (btPSR | BIT3));
-	/* setup initial timing for RFE. */
-	write_nic_word(dev, RFPinsOutput, 0x0480);
-	SetOutputEnableOfRfPins(dev);
-	write_nic_word(dev, RFPinsSelect, 0x2488);
-
-	/* PHY config. */
-	PhyConfig8185(dev);
-
-	/*
-	 *	We assume RegWirelessMode has already been initialized before,
-	 *	however, we has to validate the wireless mode here and provide a
-	 *	reasonable initialized value if necessary. 2005.01.13,
-	 *	by rcnjko.
-	 */
-	SupportedWirelessMode = GetSupportedWirelessMode8185(dev);
-	if ((ieee->mode != WIRELESS_MODE_B) &&
-		(ieee->mode != WIRELESS_MODE_G) &&
-		(ieee->mode != WIRELESS_MODE_A) &&
-		(ieee->mode != WIRELESS_MODE_AUTO)) {
-		/* It should be one of B, G, A, or AUTO. */
-		bInvalidWirelessMode = 1;
-	} else {
-	/* One of B, G, A, or AUTO. */
-		/* Check if the wireless mode is supported by RF. */
-		if	((ieee->mode != WIRELESS_MODE_AUTO) &&
-			(ieee->mode & SupportedWirelessMode) == 0) {
-			bInvalidWirelessMode = 1;
-		}
-	}
-
-	if (bInvalidWirelessMode || ieee->mode == WIRELESS_MODE_AUTO) {
-		/* Auto or other invalid value. */
-		/* Assigne a wireless mode to initialize. */
-		if ((SupportedWirelessMode & WIRELESS_MODE_A)) {
-			InitWirelessMode = WIRELESS_MODE_A;
-		} else if ((SupportedWirelessMode & WIRELESS_MODE_G)) {
-			InitWirelessMode = WIRELESS_MODE_G;
-		} else if ((SupportedWirelessMode & WIRELESS_MODE_B)) {
-			InitWirelessMode = WIRELESS_MODE_B;
-		} else {
-			DMESGW("InitializeAdapter8185(): No valid wireless mode supported, SupportedWirelessMode(%x)!!!\n",
-				 SupportedWirelessMode);
-			InitWirelessMode = WIRELESS_MODE_B;
-		}
-
-		/* Initialize RegWirelessMode if it is not a valid one.	*/
-		if (bInvalidWirelessMode)
-			ieee->mode = (enum wireless_mode)InitWirelessMode;
-
-	} else {
-	/* One of B, G, A. */
-		InitWirelessMode = ieee->mode;
-	}
-	priv->eRFPowerState = RF_OFF;
-	priv->RfOffReason = 0;
-	{
-		MgntActSet_RF_State(dev, RF_ON, 0);
-	}
-		/*
-		 * If inactive power mode is enabled, disable rf while in
-		 * disconnected state.
-		 */
-	if (priv->bInactivePs)
-		MgntActSet_RF_State(dev , RF_OFF, RF_CHANGE_BY_IPS);
-
-	ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));
-
-	/* ----------------------------------------------------------------- */
-
-	rtl8185b_irq_enable(dev);
-
-	netif_start_queue(dev);
-}
-
-void rtl8185b_rx_enable(struct net_device *dev)
-{
-	u8 cmd;
-	/* for now we accept data, management & ctl frame*/
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-
-	if (dev->flags & IFF_PROMISC)
-		DMESG("NIC in promisc mode");
-
-	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || dev->flags &
-	    IFF_PROMISC) {
-		priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM);
-		priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP;
-	}
-
-	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR)
-		priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF |
-				      RCR_APWRMGT | RCR_AICV;
-
-
-	if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)
-		priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACRC32;
-
-	write_nic_dword(dev, RCR, priv->ReceiveConfig);
-
-	fix_rx_fifo(dev);
-
-	cmd = read_nic_byte(dev, CMD);
-	write_nic_byte(dev, CMD, cmd | (1<<CMD_RX_ENABLE_SHIFT));
-
-}
-
-void rtl8185b_tx_enable(struct net_device *dev)
-{
-	u8 cmd;
-	u8 byte;
-	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
-
-	write_nic_dword(dev, TCR, priv->TransmitConfig);
-	byte = read_nic_byte(dev, MSR);
-	byte |= MSR_LINK_ENEDCA;
-	write_nic_byte(dev, MSR, byte);
-
-	fix_tx_fifo(dev);
-
-	cmd = read_nic_byte(dev, CMD);
-	write_nic_byte(dev, CMD, cmd | (1<<CMD_TX_ENABLE_SHIFT));
-}
-
diff --git a/drivers/staging/rtl8188eu/core/rtw_recv.c b/drivers/staging/rtl8188eu/core/rtw_recv.c
index 636ec553ae83..e305d43ebd06 100644
--- a/drivers/staging/rtl8188eu/core/rtw_recv.c
+++ b/drivers/staging/rtl8188eu/core/rtw_recv.c
@@ -545,20 +545,18 @@ static struct recv_frame *decryptor(struct adapter *padapter,
 static struct recv_frame *portctrl(struct adapter *adapter,
 				   struct recv_frame *precv_frame)
 {
-	u8   *psta_addr = NULL, *ptr;
+	u8   *psta_addr, *ptr;
 	uint  auth_alg;
 	struct recv_frame *pfhdr;
 	struct sta_info *psta;
 	struct sta_priv *pstapriv;
 	struct recv_frame *prtnframe;
-	u16	ether_type = 0;
+	u16	ether_type;
 	u16  eapol_type = 0x888e;/* for Funia BD's WPA issue */
 	struct rx_pkt_attrib *pattrib;
-	__be16 be_tmp;
 
 
 	pstapriv = &adapter->stapriv;
-	psta = rtw_get_stainfo(pstapriv, psta_addr);
 
 	auth_alg = adapter->securitypriv.dot11AuthAlgrthm;
 
@@ -566,24 +564,23 @@ static struct recv_frame *portctrl(struct adapter *adapter,
 	pfhdr = precv_frame;
 	pattrib = &pfhdr->attrib;
 	psta_addr = pattrib->ta;
+	psta = rtw_get_stainfo(pstapriv, psta_addr);
 
 	prtnframe = NULL;
 
 	RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("########portctrl:adapter->securitypriv.dot11AuthAlgrthm=%d\n", adapter->securitypriv.dot11AuthAlgrthm));
 
 	if (auth_alg == 2) {
+		/* get ether_type */
+		ptr = ptr + pfhdr->attrib.hdrlen + LLC_HEADER_SIZE;
+		memcpy(&ether_type, ptr, 2);
+		ether_type = ntohs((unsigned short)ether_type);
+
 		if ((psta != NULL) && (psta->ieee8021x_blocked)) {
 			/* blocked */
 			/* only accept EAPOL frame */
 			RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("########portctrl:psta->ieee8021x_blocked==1\n"));
 
-			prtnframe = precv_frame;
-
-			/* get ether_type */
-			ptr = ptr+pfhdr->attrib.hdrlen+pfhdr->attrib.iv_len+LLC_HEADER_SIZE;
-			memcpy(&be_tmp, ptr, 2);
-			ether_type = ntohs(be_tmp);
-
 			if (ether_type == eapol_type) {
 				prtnframe = precv_frame;
 			} else {
diff --git a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
index 2636e7f3dbb8..cf30a08912d1 100644
--- a/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8188eu/os_dep/ioctl_linux.c
@@ -359,7 +359,7 @@ static char *translate_scan(struct adapter *padapter,
 		if (wpa_len > 0) {
 			p = buf;
 			_rtw_memset(buf, 0, MAX_WPA_IE_LEN);
-			p += sprintf(p, "wpa_ie =");
+			p += sprintf(p, "wpa_ie=");
 			for (i = 0; i < wpa_len; i++)
 				p += sprintf(p, "%02x", wpa_ie[i]);
 
@@ -376,7 +376,7 @@ static char *translate_scan(struct adapter *padapter,
 		if (rsn_len > 0) {
 			p = buf;
 			_rtw_memset(buf, 0, MAX_WPA_IE_LEN);
-			p += sprintf(p, "rsn_ie =");
+			p += sprintf(p, "rsn_ie=");
 			for (i = 0; i < rsn_len; i++)
 				p += sprintf(p, "%02x", rsn_ie[i]);
 			_rtw_memset(&iwe, 0, sizeof(iwe));
@@ -2899,7 +2899,7 @@ static int rtw_p2p_get_status(struct net_device *dev,
 	/*	Commented by Albert 2010/10/12 */
 	/*	Because of the output size limitation, I had removed the "Role" information. */
 	/*	About the "Role" information, we will use the new private IOCTL to get the "Role" information. */
-	sprintf(extra, "\n\nStatus =%.2d\n", rtw_p2p_state(pwdinfo));
+	sprintf(extra, "\n\nStatus=%.2d\n", rtw_p2p_state(pwdinfo));
 	wrqu->data.length = strlen(extra);
 
 	return ret;
@@ -2918,7 +2918,7 @@ static int rtw_p2p_get_req_cm(struct net_device *dev,
 	struct adapter *padapter = (struct adapter *)rtw_netdev_priv(dev);
 	struct wifidirect_info *pwdinfo = &(padapter->wdinfo);
 
-	sprintf(extra, "\n\nCM =%s\n", pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req);
+	sprintf(extra, "\n\nCM=%s\n", pwdinfo->rx_prov_disc_info.strconfig_method_desc_of_prov_disc_req);
 	wrqu->data.length = strlen(extra);
 	return ret;
 }
@@ -2935,7 +2935,7 @@ static int rtw_p2p_get_role(struct net_device *dev,
 			pwdinfo->p2p_peer_interface_addr[0], pwdinfo->p2p_peer_interface_addr[1], pwdinfo->p2p_peer_interface_addr[2],
 			pwdinfo->p2p_peer_interface_addr[3], pwdinfo->p2p_peer_interface_addr[4], pwdinfo->p2p_peer_interface_addr[5]);
 
-	sprintf(extra, "\n\nRole =%.2d\n", rtw_p2p_role(pwdinfo));
+	sprintf(extra, "\n\nRole=%.2d\n", rtw_p2p_role(pwdinfo));
 	wrqu->data.length = strlen(extra);
 	return ret;
 }
@@ -3022,7 +3022,7 @@ static int rtw_p2p_get_op_ch(struct net_device *dev,
 
 	DBG_88E("[%s] Op_ch = %02x\n", __func__, pwdinfo->operating_channel);
 
-	sprintf(extra, "\n\nOp_ch =%.2d\n", pwdinfo->operating_channel);
+	sprintf(extra, "\n\nOp_ch=%.2d\n", pwdinfo->operating_channel);
 	wrqu->data.length = strlen(extra);
 	return ret;
 }
@@ -3043,7 +3043,7 @@ static int rtw_p2p_get_wps_configmethod(struct net_device *dev,
 	u8 blnMatch = 0;
 	u16	attr_content = 0;
 	uint attr_contentlen = 0;
-	/* 6 is the string "wpsCM =", 17 is the MAC addr, we have to clear it at wrqu->data.pointer */
+	/* 6 is the string "wpsCM=", 17 is the MAC addr, we have to clear it at wrqu->data.pointer */
 	u8 attr_content_str[6 + 17] = {0x00};
 
 	/*	Commented by Albert 20110727 */
@@ -3079,7 +3079,7 @@ static int rtw_p2p_get_wps_configmethod(struct net_device *dev,
 				rtw_get_wps_attr_content(wpsie, wpsie_len, WPS_ATTR_CONF_METHOD, (u8 *) &be_tmp, &attr_contentlen);
 				if (attr_contentlen) {
 					attr_content = be16_to_cpu(be_tmp);
-					sprintf(attr_content_str, "\n\nM =%.4d", attr_content);
+					sprintf(attr_content_str, "\n\nM=%.4d", attr_content);
 					blnMatch = 1;
 				}
 			}
@@ -3091,7 +3091,7 @@ static int rtw_p2p_get_wps_configmethod(struct net_device *dev,
 	spin_unlock_bh(&pmlmepriv->scanned_queue.lock);
 
 	if (!blnMatch)
-		sprintf(attr_content_str, "\n\nM = 0000");
+		sprintf(attr_content_str, "\n\nM=0000");
 
 	if (copy_to_user(wrqu->data.pointer, attr_content_str, 6 + 17))
 		return -EFAULT;
@@ -3172,9 +3172,9 @@ static int rtw_p2p_get_go_device_address(struct net_device *dev,
 	spin_unlock_bh(&pmlmepriv->scanned_queue.lock);
 
 	if (!blnMatch)
-		snprintf(go_devadd_str, sizeof(go_devadd_str), "\n\ndev_add = NULL");
+		snprintf(go_devadd_str, sizeof(go_devadd_str), "\n\ndev_add=NULL");
 	else
-		snprintf(go_devadd_str, sizeof(go_devadd_str), "\n\ndev_add =%.2X:%.2X:%.2X:%.2X:%.2X:%.2X",
+		snprintf(go_devadd_str, sizeof(go_devadd_str), "\n\ndev_add=%.2X:%.2X:%.2X:%.2X:%.2X:%.2X",
 			attr_content[0], attr_content[1], attr_content[2], attr_content[3], attr_content[4], attr_content[5]);
 
 	if (copy_to_user(wrqu->data.pointer, go_devadd_str, sizeof(go_devadd_str)))
@@ -3198,7 +3198,7 @@ static int rtw_p2p_get_device_type(struct net_device *dev,
 	u8 blnMatch = 0;
 	u8 dev_type[8] = {0x00};
 	uint dev_type_len = 0;
-	u8 dev_type_str[17 + 9] = {0x00};	/*  +9 is for the str "dev_type =", we have to clear it at wrqu->data.pointer */
+	u8 dev_type_str[17 + 9] = {0x00};	/*  +9 is for the str "dev_type=", we have to clear it at wrqu->data.pointer */
 
 	/*	Commented by Albert 20121209 */
 	/*	The input data is the MAC address which the application wants to know its device type. */
@@ -3239,7 +3239,7 @@ static int rtw_p2p_get_device_type(struct net_device *dev,
 
 					memcpy(&be_tmp, dev_type, 2);
 					type = be16_to_cpu(be_tmp);
-					sprintf(dev_type_str, "\n\nN =%.2d", type);
+					sprintf(dev_type_str, "\n\nN=%.2d", type);
 					blnMatch = 1;
 				}
 			}
@@ -3252,7 +3252,7 @@ static int rtw_p2p_get_device_type(struct net_device *dev,
 	spin_unlock_bh(&pmlmepriv->scanned_queue.lock);
 
 	if (!blnMatch)
-		sprintf(dev_type_str, "\n\nN = 00");
+		sprintf(dev_type_str, "\n\nN=00");
 
 	if (copy_to_user(wrqu->data.pointer, dev_type_str, 9 + 17)) {
 		return -EFAULT;
@@ -3277,7 +3277,7 @@ static int rtw_p2p_get_device_name(struct net_device *dev,
 	u8 blnMatch = 0;
 	u8 dev_name[WPS_MAX_DEVICE_NAME_LEN] = {0x00};
 	uint dev_len = 0;
-	u8 dev_name_str[WPS_MAX_DEVICE_NAME_LEN + 5] = {0x00};	/*  +5 is for the str "devN =", we have to clear it at wrqu->data.pointer */
+	u8 dev_name_str[WPS_MAX_DEVICE_NAME_LEN + 5] = {0x00};	/*  +5 is for the str "devN=", we have to clear it at wrqu->data.pointer */
 
 	/*	Commented by Albert 20121225 */
 	/*	The input data is the MAC address which the application wants to know its device name. */
@@ -3310,7 +3310,7 @@ static int rtw_p2p_get_device_name(struct net_device *dev,
 			if (wpsie) {
 				rtw_get_wps_attr_content(wpsie, wpsie_len, WPS_ATTR_DEVICE_NAME, dev_name, &dev_len);
 				if (dev_len) {
-					sprintf(dev_name_str, "\n\nN =%s", dev_name);
+					sprintf(dev_name_str, "\n\nN=%s", dev_name);
 					blnMatch = 1;
 				}
 			}
@@ -3323,7 +3323,7 @@ static int rtw_p2p_get_device_name(struct net_device *dev,
 	spin_unlock_bh(&pmlmepriv->scanned_queue.lock);
 
 	if (!blnMatch)
-		sprintf(dev_name_str, "\n\nN = 0000");
+		sprintf(dev_name_str, "\n\nN=0000");
 
 	if (copy_to_user(wrqu->data.pointer, dev_name_str, 5 + ((dev_len > 17) ? dev_len : 17)))
 		return -EFAULT;
@@ -3349,7 +3349,7 @@ static int rtw_p2p_get_invitation_procedure(struct net_device *dev,
 	u8 attr_content[2] = {0x00};
 
 	u8 inv_proc_str[17 + 8] = {0x00};
-	/*  +8 is for the str "InvProc =", we have to clear it at wrqu->data.pointer */
+	/*  +8 is for the str "InvProc=", we have to clear it at wrqu->data.pointer */
 
 	/*	Commented by Ouden 20121226 */
 	/*	The application wants to know P2P initiation procedure is supported or not. */
@@ -3397,12 +3397,12 @@ static int rtw_p2p_get_invitation_procedure(struct net_device *dev,
 	spin_unlock_bh(&pmlmepriv->scanned_queue.lock);
 
 	if (!blnMatch) {
-		sprintf(inv_proc_str, "\nIP =-1");
+		sprintf(inv_proc_str, "\nIP=-1");
 	} else {
 		if (attr_content[0] & 0x20)
-			sprintf(inv_proc_str, "\nIP = 1");
+			sprintf(inv_proc_str, "\nIP=1");
 		else
-			sprintf(inv_proc_str, "\nIP = 0");
+			sprintf(inv_proc_str, "\nIP=0");
 	}
 	if (copy_to_user(wrqu->data.pointer, inv_proc_str, 8 + 17))
 		return -EFAULT;
@@ -3512,7 +3512,7 @@ static int rtw_p2p_invite_req(struct net_device *dev,
 	/*	The input data contains two informations. */
 	/*	1. First information is the P2P device address which you want to send to. */
 	/*	2. Second information is the group id which combines with GO's mac address, space and GO's ssid. */
-	/*	Command line sample: iwpriv wlan0 p2p_set invite ="00:11:22:33:44:55 00:E0:4C:00:00:05 DIRECT-xy" */
+	/*	Command line sample: iwpriv wlan0 p2p_set invite="00:11:22:33:44:55 00:E0:4C:00:00:05 DIRECT-xy" */
 	/*	Format: 00:11:22:33:44:55 00:E0:4C:00:00:05 DIRECT-xy */
 
 	DBG_88E("[%s] data = %s\n", __func__, extra);
@@ -3805,48 +3805,48 @@ static int rtw_p2p_set(struct net_device *dev,
 
 #ifdef CONFIG_88EU_P2P
 	DBG_88E("[%s] extra = %s\n", __func__, extra);
-	if (!memcmp(extra, "enable =", 7)) {
+	if (!memcmp(extra, "enable=", 7)) {
 		rtw_wext_p2p_enable(dev, info, wrqu, &extra[7]);
-	} else if (!memcmp(extra, "setDN =", 6)) {
+	} else if (!memcmp(extra, "setDN=", 6)) {
 		wrqu->data.length -= 6;
 		rtw_p2p_setDN(dev, info, wrqu, &extra[6]);
-	} else if (!memcmp(extra, "profilefound =", 13)) {
+	} else if (!memcmp(extra, "profilefound=", 13)) {
 		wrqu->data.length -= 13;
 		rtw_p2p_profilefound(dev, info, wrqu, &extra[13]);
-	} else if (!memcmp(extra, "prov_disc =", 10)) {
+	} else if (!memcmp(extra, "prov_disc=", 10)) {
 		wrqu->data.length -= 10;
 		rtw_p2p_prov_disc(dev, info, wrqu, &extra[10]);
-	} else if (!memcmp(extra, "nego =", 5)) {
+	} else if (!memcmp(extra, "nego=", 5)) {
 		wrqu->data.length -= 5;
 		rtw_p2p_connect(dev, info, wrqu, &extra[5]);
-	} else if (!memcmp(extra, "intent =", 7)) {
+	} else if (!memcmp(extra, "intent=", 7)) {
 		/*	Commented by Albert 2011/03/23 */
 		/*	The wrqu->data.length will include the null character */
 		/*	So, we will decrease 7 + 1 */
 		wrqu->data.length -= 8;
 		rtw_p2p_set_intent(dev, info, wrqu, &extra[7]);
-	} else if (!memcmp(extra, "ssid =", 5)) {
+	} else if (!memcmp(extra, "ssid=", 5)) {
 		wrqu->data.length -= 5;
 		rtw_p2p_set_go_nego_ssid(dev, info, wrqu, &extra[5]);
-	} else if (!memcmp(extra, "got_wpsinfo =", 12)) {
+	} else if (!memcmp(extra, "got_wpsinfo=", 12)) {
 		wrqu->data.length -= 12;
 		rtw_p2p_got_wpsinfo(dev, info, wrqu, &extra[12]);
-	} else if (!memcmp(extra, "listen_ch =", 10)) {
+	} else if (!memcmp(extra, "listen_ch=", 10)) {
 		/*	Commented by Albert 2011/05/24 */
 		/*	The wrqu->data.length will include the null character */
 		/*	So, we will decrease (10 + 1) */
 		wrqu->data.length -= 11;
 		rtw_p2p_set_listen_ch(dev, info, wrqu, &extra[10]);
-	} else if (!memcmp(extra, "op_ch =", 6)) {
+	} else if (!memcmp(extra, "op_ch=", 6)) {
 		/*	Commented by Albert 2011/05/24 */
 		/*	The wrqu->data.length will include the null character */
 		/*	So, we will decrease (6 + 1) */
 		wrqu->data.length -= 7;
 		rtw_p2p_set_op_ch(dev, info, wrqu, &extra[6]);
-	} else if (!memcmp(extra, "invite =", 7)) {
+	} else if (!memcmp(extra, "invite=", 7)) {
 		wrqu->data.length -= 8;
 		rtw_p2p_invite_req(dev, info, wrqu, &extra[7]);
-	} else if (!memcmp(extra, "persistent =", 11)) {
+	} else if (!memcmp(extra, "persistent=", 11)) {
 		wrqu->data.length -= 11;
 		rtw_p2p_set_persistent(dev, info, wrqu, &extra[11]);
 	}
@@ -3887,7 +3887,7 @@ static int rtw_p2p_get(struct net_device *dev,
 			"group_id", 8)) {
 		rtw_p2p_get_groupid(dev, info, wrqu, extra);
 	} else if (!memcmp((__force const char *)wrqu->data.pointer,
-			"peer_deva_inv", 9)) {
+			"peer_deva_inv", 13)) {
 		/*	Get the P2P device address when receiving the P2P Invitation request frame. */
 		rtw_p2p_get_peer_devaddr_by_invitation(dev, info, wrqu, extra);
 	} else if (!memcmp((__force const char *)wrqu->data.pointer,
@@ -6920,7 +6920,7 @@ static int rtw_mp_ctx(struct net_device *dev,
 
 	DBG_88E("%s: in =%s\n", __func__, extra);
 
-	countPkTx = strncmp(extra, "count =", 5); /*  strncmp true is 0 */
+	countPkTx = strncmp(extra, "count=", 6); /*  strncmp true is 0 */
 	cotuTx = strncmp(extra, "background", 20);
 	CarrSprTx = strncmp(extra, "background, cs", 20);
 	scTx = strncmp(extra, "background, sc", 20);
@@ -7044,7 +7044,7 @@ static int rtw_mp_arx(struct net_device *dev,
 	DBG_88E("%s: %s\n", __func__, input);
 
 	bStartRx = (strncmp(input, "start", 5) == 0) ? 1 : 0; /*  strncmp true is 0 */
-	bStopRx = (strncmp(input, "stop", 5) == 0) ? 1 : 0; /*  strncmp true is 0 */
+	bStopRx = (strncmp(input, "stop", 4) == 0) ? 1 : 0; /*  strncmp true is 0 */
 	bQueryPhy = (strncmp(input, "phy", 3) == 0) ? 1 : 0; /*  strncmp true is 0 */
 
 	if (bStartRx) {
diff --git a/drivers/staging/rtl8712/rtl871x_recv.c b/drivers/staging/rtl8712/rtl871x_recv.c
index 23ec684b60e1..274c359279ef 100644
--- a/drivers/staging/rtl8712/rtl871x_recv.c
+++ b/drivers/staging/rtl8712/rtl871x_recv.c
@@ -254,7 +254,7 @@ union recv_frame *r8712_portctrl(struct _adapter *adapter,
 	struct sta_info *psta;
 	struct	sta_priv *pstapriv;
 	union recv_frame *prtnframe;
-	u16 ether_type = 0;
+	u16 ether_type;
 
 	pstapriv = &adapter->stapriv;
 	ptr = get_recvframe_data(precv_frame);
@@ -263,15 +263,14 @@ union recv_frame *r8712_portctrl(struct _adapter *adapter,
 	psta = r8712_get_stainfo(pstapriv, psta_addr);
 	auth_alg = adapter->securitypriv.AuthAlgrthm;
 	if (auth_alg == 2) {
+		/* get ether_type */
+		ptr = ptr + pfhdr->attrib.hdrlen + LLC_HEADER_SIZE;
+		memcpy(&ether_type, ptr, 2);
+		ether_type = ntohs((unsigned short)ether_type);
+
 		if ((psta != NULL) && (psta->ieee8021x_blocked)) {
 			/* blocked
 			 * only accept EAPOL frame */
-			prtnframe = precv_frame;
-			/*get ether_type */
-			ptr = ptr + pfhdr->attrib.hdrlen +
-			      pfhdr->attrib.iv_len + LLC_HEADER_SIZE;
-			memcpy(&ether_type, ptr, 2);
-			ether_type = ntohs((unsigned short)ether_type);
 			if (ether_type == 0x888e)
 				prtnframe = precv_frame;
 			else {
diff --git a/drivers/staging/rtl8723au/core/rtw_ieee80211.c b/drivers/staging/rtl8723au/core/rtw_ieee80211.c
index 780631fd3b6d..a48ab25a7d8a 100644
--- a/drivers/staging/rtl8723au/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8723au/core/rtw_ieee80211.c
@@ -1496,45 +1496,23 @@ void rtw_wlan_bssid_ex_remove_p2p_attr23a(struct wlan_bssid_ex *bss_ex, u8 attr_
 int rtw_get_wfd_ie(u8 *in_ie, int in_len, u8 *wfd_ie, uint *wfd_ielen)
 {
 	int match;
-	uint cnt = 0;
-	u8 eid, wfd_oui[4] = {0x50, 0x6F, 0x9A, 0x0A};
+	const u8 *ie;
 
-	match = false;
+	match = 0;
 
-	if (in_len < 0) {
+	if (in_len < 0)
 		return match;
-	}
-
-	while (cnt < in_len)
-	{
-		eid = in_ie[cnt];
 
-		if ((eid == _VENDOR_SPECIFIC_IE_) &&
-		    !memcmp(&in_ie[cnt+2], wfd_oui, 4)) {
-			if (wfd_ie != NULL) {
-				memcpy(wfd_ie, &in_ie[cnt], in_ie[cnt + 1] + 2);
-
-			} else {
-				if (wfd_ielen != NULL) {
-					*wfd_ielen = 0;
-				}
-			}
-
-			if (wfd_ielen != NULL) {
-				*wfd_ielen = in_ie[cnt + 1] + 2;
-			}
-
-			cnt += in_ie[cnt + 1] + 2;
-
-			match = true;
-			break;
-		} else {
-			cnt += in_ie[cnt + 1] +2; /* goto next */
-		}
-	}
+	ie = cfg80211_find_vendor_ie(0x506F9A, 0x0A, in_ie, in_len);
+	if (ie && (ie[1] <= (MAX_WFD_IE_LEN - 2))) {
+		if (wfd_ie) {
+			*wfd_ielen = ie[1] + 2;
+			memcpy(wfd_ie, ie, ie[1] + 2);
+		} else
+			if (wfd_ielen)
+				*wfd_ielen = 0;
 
-	if (match == true) {
-		match = cnt;
+		match = 1;
 	}
 
 	return match;
diff --git a/drivers/staging/rtl8723au/core/rtw_mlme_ext.c b/drivers/staging/rtl8723au/core/rtw_mlme_ext.c
index 4c753639ea5a..1f3e8a0aece4 100644
--- a/drivers/staging/rtl8723au/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723au/core/rtw_mlme_ext.c
@@ -1281,7 +1281,7 @@ unsigned int OnAssocReq23a(struct rtw_adapter *padapter, struct recv_frame *prec
 	u8 p2p_status_code = P2P_STATUS_SUCCESS;
 	u8 *p2pie;
 	u32 p2pielen = 0;
-	u8	wfd_ie[ 128 ] = { 0x00 };
+	u8	wfd_ie[MAX_WFD_IE_LEN] = { 0x00 };
 	u32	wfd_ielen = 0;
 #endif /* CONFIG_8723AU_P2P */
 
diff --git a/drivers/staging/rtl8723au/core/rtw_p2p.c b/drivers/staging/rtl8723au/core/rtw_p2p.c
index 27a6cc76973d..1a961e3f3a55 100644
--- a/drivers/staging/rtl8723au/core/rtw_p2p.c
+++ b/drivers/staging/rtl8723au/core/rtw_p2p.c
@@ -2535,7 +2535,7 @@ u8 process_p2p_group_negotation_req23a(struct wifidirect_info *pwdinfo, u8 *pfra
 	u16		wps_devicepassword_id = 0x0000;
 	uint	wps_devicepassword_id_len = 0;
 #ifdef CONFIG_8723AU_P2P
-	u8	wfd_ie[ 128 ] = { 0x00 };
+	u8	wfd_ie[MAX_WFD_IE_LEN] = { 0x00 };
 	u32	wfd_ielen = 0;
 #endif /*  CONFIG_8723AU_P2P */
 
@@ -2741,7 +2741,7 @@ u8 process_p2p_group_negotation_resp23a(struct wifidirect_info *pwdinfo, u8 *pfr
 	u32 ies_len;
 	u8 * p2p_ie;
 #ifdef CONFIG_8723AU_P2P
-	u8	wfd_ie[ 128 ] = { 0x00 };
+	u8	wfd_ie[MAX_WFD_IE_LEN] = { 0x00 };
 	u32	wfd_ielen = 0;
 #endif /*  CONFIG_8723AU_P2P */
 
diff --git a/drivers/staging/rtl8723au/core/rtw_wlan_util.c b/drivers/staging/rtl8723au/core/rtw_wlan_util.c
index 0dfcfbce3b52..99d81e612e7b 100644
--- a/drivers/staging/rtl8723au/core/rtw_wlan_util.c
+++ b/drivers/staging/rtl8723au/core/rtw_wlan_util.c
@@ -570,7 +570,7 @@ void flush_all_cam_entry23a(struct rtw_adapter *padapter)
 int WFD_info_handler(struct rtw_adapter *padapter, struct ndis_802_11_var_ies *	pIE)
 {
 	struct wifidirect_info	*pwdinfo;
-	u8	wfd_ie[128] = {0x00};
+	u8	wfd_ie[MAX_WFD_IE_LEN] = {0x00};
 	u32	wfd_ielen = 0;
 
 	pwdinfo = &padapter->wdinfo;
@@ -681,7 +681,7 @@ void WMMOnAssocRsp23a(struct rtw_adapter *padapter)
 	inx[0] = 0; inx[1] = 1; inx[2] = 2; inx[3] = 3;
 
 	if (pregpriv->wifi_spec == 1) {
-		u32	j, tmp, change_inx;
+		u32	j, tmp, change_inx = false;
 
 		/* entry indx: 0->vo, 1->vi, 2->be, 3->bk. */
 		for (i = 0; i < 4; i++) {
diff --git a/drivers/staging/rtl8821ae/base.c b/drivers/staging/rtl8821ae/base.c
index e5073fe24770..a4c9cc437bc6 100644
--- a/drivers/staging/rtl8821ae/base.c
+++ b/drivers/staging/rtl8821ae/base.c
@@ -388,7 +388,7 @@ static void _rtl_init_mac80211(struct ieee80211_hw *hw)
 
 }
 
-static void _rtl_init_deferred_work(struct ieee80211_hw *hw)
+static int _rtl_init_deferred_work(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 
@@ -410,6 +410,9 @@ static void _rtl_init_deferred_work(struct ieee80211_hw *hw)
 	rtlpriv->works.rtl_wq = create_workqueue(rtlpriv->cfg->name);
 #endif
 /*<delete in kernel end>*/
+	if (!rtlpriv->works.rtl_wq)
+		return -ENOMEM;
+
 	INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
 			  (void *)rtl_watchdog_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
@@ -421,6 +424,8 @@ static void _rtl_init_deferred_work(struct ieee80211_hw *hw)
 	INIT_DELAYED_WORK(&rtlpriv->works.fwevt_wq,
 			  (void *)rtl_fwevt_wq_callback);
 
+	return 0;
+
 }
 
 void rtl_deinit_deferred_work(struct ieee80211_hw *hw)
@@ -519,7 +524,8 @@ int rtl_init_core(struct ieee80211_hw *hw)
 	INIT_LIST_HEAD(&rtlpriv->entry_list);
 
 	/* <6> init deferred work */
-	_rtl_init_deferred_work(hw);
+	if (_rtl_init_deferred_work(hw))
+		return 1;
 
 	/* <7> */
 #ifdef VIF_TODO
diff --git a/drivers/staging/speakup/main.c b/drivers/staging/speakup/main.c
index ef5933b93590..3b6e5358c723 100644
--- a/drivers/staging/speakup/main.c
+++ b/drivers/staging/speakup/main.c
@@ -1855,8 +1855,9 @@ static int handle_goto(struct vc_data *vc, u_char type, u_char ch, u_short key)
 {
 	static u_char goto_buf[8];
 	static int num;
-	int maxlen, go_pos;
+	int maxlen;
 	char *cp;
+
 	if (type == KT_SPKUP && ch == SPEAKUP_GOTO)
 		goto do_goto;
 	if (type == KT_LATIN && ch == '\n')
@@ -1891,25 +1892,24 @@ oops:
 		spk_special_handler = NULL;
 		return 1;
 	}
-	go_pos = kstrtol(goto_buf, 10, (long *)&cp);
-	goto_pos = (u_long) go_pos;
+
+	goto_pos = simple_strtoul(goto_buf, &cp, 10);
+
 	if (*cp == 'x') {
 		if (*goto_buf < '0')
 			goto_pos += spk_x;
-		else
+		else if (goto_pos > 0)
 			goto_pos--;
-		if (goto_pos < 0)
-			goto_pos = 0;
+
 		if (goto_pos >= vc->vc_cols)
 			goto_pos = vc->vc_cols - 1;
 		goto_x = 1;
 	} else {
 		if (*goto_buf < '0')
 			goto_pos += spk_y;
-		else
+		else if (goto_pos > 0)
 			goto_pos--;
-		if (goto_pos < 0)
-			goto_pos = 0;
+
 		if (goto_pos >= vc->vc_rows)
 			goto_pos = vc->vc_rows - 1;
 		goto_x = 0;
diff --git a/drivers/staging/unisys/uislib/uislib.c b/drivers/staging/unisys/uislib/uislib.c
index 8ea9c46e56ae..3152a2180c45 100644
--- a/drivers/staging/unisys/uislib/uislib.c
+++ b/drivers/staging/unisys/uislib/uislib.c
@@ -381,17 +381,17 @@ create_bus(CONTROLVM_MESSAGE *msg, char *buf)
 		cmd.add_vbus.busTypeGuid = msg->cmd.createBus.busDataTypeGuid;
 		cmd.add_vbus.busInstGuid = msg->cmd.createBus.busInstGuid;
 		if (!VirtControlChanFunc) {
-			kfree(bus);
 			LOGERR("CONTROLVM_BUS_CREATE Failed: virtpci callback not registered.");
 			POSTCODE_LINUX_3(BUS_CREATE_FAILURE_PC, bus->busNo,
 					 POSTCODE_SEVERITY_ERR);
+			kfree(bus);
 			return CONTROLVM_RESP_ERROR_VIRTPCI_DRIVER_FAILURE;
 		}
 		if (!VirtControlChanFunc(&cmd)) {
-			kfree(bus);
 			LOGERR("CONTROLVM_BUS_CREATE Failed: virtpci GUEST_ADD_VBUS returned error.");
 			POSTCODE_LINUX_3(BUS_CREATE_FAILURE_PC, bus->busNo,
 					 POSTCODE_SEVERITY_ERR);
+			kfree(bus);
 			return
 			    CONTROLVM_RESP_ERROR_VIRTPCI_DRIVER_CALLBACK_ERROR;
 		}
diff --git a/drivers/staging/unisys/visorchipset/visorchipset.h b/drivers/staging/unisys/visorchipset/visorchipset.h
index d4bf203cdfdf..d95825dc5414 100644
--- a/drivers/staging/unisys/visorchipset/visorchipset.h
+++ b/drivers/staging/unisys/visorchipset/visorchipset.h
@@ -104,9 +104,9 @@ finddevice(struct list_head *list, U32 busNo, U32 devNo)
 
 static inline void delbusdevices(struct list_head *list, U32 busNo)
 {
-	VISORCHIPSET_DEVICE_INFO *p;
+	VISORCHIPSET_DEVICE_INFO *p, *tmp;
 
-	list_for_each_entry(p, list, entry) {
+	list_for_each_entry_safe(p, tmp, list, entry) {
 		if (p->busNo == busNo) {
 			list_del(&p->entry);
 			kfree(p);
diff --git a/drivers/staging/unisys/visorchipset/visorchipset_main.c b/drivers/staging/unisys/visorchipset/visorchipset_main.c
index 257c6e59b460..c475e256e34b 100644
--- a/drivers/staging/unisys/visorchipset/visorchipset_main.c
+++ b/drivers/staging/unisys/visorchipset/visorchipset_main.c
@@ -605,16 +605,16 @@ EXPORT_SYMBOL_GPL(visorchipset_register_busdev_client);
 static void
 cleanup_controlvm_structures(void)
 {
-	VISORCHIPSET_BUS_INFO *bi;
-	VISORCHIPSET_DEVICE_INFO *di;
+	VISORCHIPSET_BUS_INFO *bi, *tmp_bi;
+	VISORCHIPSET_DEVICE_INFO *di, *tmp_di;
 
-	list_for_each_entry(bi, &BusInfoList, entry) {
+	list_for_each_entry_safe(bi, tmp_bi, &BusInfoList, entry) {
 		busInfo_clear(bi);
 		list_del(&bi->entry);
 		kfree(bi);
 	}
 
-	list_for_each_entry(di, &DevInfoList, entry) {
+	list_for_each_entry_safe(di, tmp_di, &DevInfoList, entry) {
 		devInfo_clear(di);
 		list_del(&di->entry);
 		kfree(di);
diff --git a/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c b/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c
index c5bf60b135b9..92caef7474c7 100644
--- a/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c
+++ b/drivers/staging/usbip/userspace/libsrc/usbip_host_driver.c
@@ -118,6 +118,7 @@ static int refresh_exported_devices(void)
 	struct udev_list_entry *devices, *dev_list_entry;
 	struct udev_device *dev;
 	const char *path;
+	const char *driver;
 
 	enumerate = udev_enumerate_new(udev_context);
 	udev_enumerate_add_match_subsystem(enumerate, "usb");
@@ -128,10 +129,12 @@ static int refresh_exported_devices(void)
 	udev_list_entry_foreach(dev_list_entry, devices) {
 		path = udev_list_entry_get_name(dev_list_entry);
 		dev = udev_device_new_from_syspath(udev_context, path);
+		if (dev == NULL)
+			continue;
 
 		/* Check whether device uses usbip-host driver. */
-		if (!strcmp(udev_device_get_driver(dev),
-			    USBIP_HOST_DRV_NAME)) {
+		driver = udev_device_get_driver(dev);
+		if (driver != NULL && !strcmp(driver, USBIP_HOST_DRV_NAME)) {
 			edev = usbip_exported_device_new(path);
 			if (!edev) {
 				dbg("usbip_exported_device_new failed");
diff --git a/drivers/staging/usbip/vhci_sysfs.c b/drivers/staging/usbip/vhci_sysfs.c
index 47bddcdde0a6..211f43f67ea2 100644
--- a/drivers/staging/usbip/vhci_sysfs.c
+++ b/drivers/staging/usbip/vhci_sysfs.c
@@ -184,7 +184,7 @@ static ssize_t store_attach(struct device *dev, struct device_attribute *attr,
 	 * @devid: unique device identifier in a remote host
 	 * @speed: usb device speed in a remote host
 	 */
-	if (sscanf(buf, "%u %u %u %u", &rhport, &sockfd, &devid, &speed) != 1)
+	if (sscanf(buf, "%u %u %u %u", &rhport, &sockfd, &devid, &speed) != 4)
 		return -EINVAL;
 
 	usbip_dbg_vhci_sysfs("rhport(%u) sockfd(%u) devid(%u) speed(%u)\n",
diff --git a/drivers/staging/vme/devices/vme_user.c b/drivers/staging/vme/devices/vme_user.c
index 792792715673..ffb4eeefdddb 100644
--- a/drivers/staging/vme/devices/vme_user.c
+++ b/drivers/staging/vme/devices/vme_user.c
@@ -776,7 +776,8 @@ static int vme_user_probe(struct vme_dev *vdev)
 		image[i].kern_buf = kmalloc(image[i].size_buf, GFP_KERNEL);
 		if (image[i].kern_buf == NULL) {
 			err = -ENOMEM;
-			goto err_master_buf;
+			vme_master_free(image[i].resource);
+			goto err_master;
 		}
 	}
 
@@ -819,8 +820,6 @@ static int vme_user_probe(struct vme_dev *vdev)
 
 	return 0;
 
-	/* Ensure counter set correcty to destroy all sysfs devices */
-	i = VME_DEVS;
 err_sysfs:
 	while (i > 0) {
 		i--;
@@ -830,12 +829,10 @@ err_sysfs:
 
 	/* Ensure counter set correcty to unalloc all master windows */
 	i = MASTER_MAX + 1;
-err_master_buf:
-	for (i = MASTER_MINOR; i < (MASTER_MAX + 1); i++)
-		kfree(image[i].kern_buf);
 err_master:
 	while (i > MASTER_MINOR) {
 		i--;
+		kfree(image[i].kern_buf);
 		vme_master_free(image[i].resource);
 	}
 
diff --git a/drivers/staging/xgifb/vb_def.h b/drivers/staging/xgifb/vb_def.h
index 5c739bebd8a5..949f0e5eed8d 100644
--- a/drivers/staging/xgifb/vb_def.h
+++ b/drivers/staging/xgifb/vb_def.h
@@ -1,6 +1,6 @@
 #ifndef _VB_DEF_
 #define _VB_DEF_
-#include "../../video/sis/initdef.h"
+#include "../../video/fbdev/sis/initdef.h"
 
 #define VB_XGI301C      0x0020 /* for 301C */
 
diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h
index c08ff5b2d6ee..0d27594554ca 100644
--- a/drivers/staging/xgifb/vb_struct.h
+++ b/drivers/staging/xgifb/vb_struct.h
@@ -1,6 +1,6 @@
 #ifndef _VB_STRUCT_
 #define _VB_STRUCT_
-#include "../../video/sis/vstruct.h"
+#include "../../video/fbdev/sis/vstruct.h"
 
 struct XGI_LVDSCRT1HDataStruct {
 	unsigned char Reg[8];
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
index ddf7776c295b..264351441f99 100644
--- a/drivers/staging/xgifb/vgatypes.h
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -2,8 +2,8 @@
 #define _VGATYPES_
 
 #include <linux/fb.h>	/* for struct fb_var_screeninfo for sis.h */
-#include "../../video/sis/vgatypes.h"
-#include "../../video/sis/sis.h"		/* for LCD_TYPE */
+#include "../../video/fbdev/sis/vgatypes.h"
+#include "../../video/fbdev/sis/sis.h"		/* for LCD_TYPE */
 
 #ifndef XGI_VB_CHIP_TYPE
 enum XGI_VB_CHIP_TYPE {
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 2e6d8ddc4425..5d9b01aa54f4 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1226,6 +1226,7 @@ config SERIAL_BFIN_SPORT3_UART_CTSRTS
 config SERIAL_TIMBERDALE
 	tristate "Support for timberdale UART"
 	select SERIAL_CORE
+	depends on X86_32 || COMPILE_TEST
 	---help---
 	Add support for UART controller on timberdale.
 
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d4eda24aa68b..dacf0a09ab24 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -318,7 +318,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
 			.src_addr = uap->port.mapbase + UART01x_DR,
 			.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
 			.direction = DMA_DEV_TO_MEM,
-			.src_maxburst = uap->fifosize >> 1,
+			.src_maxburst = uap->fifosize >> 2,
 			.device_fc = false,
 		};
 
@@ -2176,6 +2176,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 static int pl011_remove(struct amba_device *dev)
 {
 	struct uart_amba_port *uap = amba_get_drvdata(dev);
+	bool busy = false;
 	int i;
 
 	uart_remove_one_port(&amba_reg, &uap->port);
@@ -2183,9 +2184,12 @@ static int pl011_remove(struct amba_device *dev)
 	for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
 		if (amba_ports[i] == uap)
 			amba_ports[i] = NULL;
+		else if (amba_ports[i])
+			busy = true;
 
 	pl011_dma_remove(uap);
-	uart_unregister_driver(&amba_reg);
+	if (!busy)
+		uart_unregister_driver(&amba_reg);
 	return 0;
 }
 
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 5e6fdb1ea73b..14aaea0d4131 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -368,16 +368,12 @@ static const struct uart_ops uart_clps711x_ops = {
 static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
 {
 	struct clps711x_port *s = dev_get_drvdata(port->dev);
+	u32 sysflg = 0;
 
 	/* Wait for FIFO is not full */
-	while (1) {
-		u32 sysflg = 0;
-
+	do {
 		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
-		if (!(sysflg & SYSFLG_UTXFF))
-			break;
-		cond_resched();
-	}
+	} while (sysflg & SYSFLG_UTXFF);
 
 	writew(ch, port->membase + UARTDR_OFFSET);
 }
@@ -387,18 +383,14 @@ static void uart_clps711x_console_write(struct console *co, const char *c,
 {
 	struct uart_port *port = clps711x_uart.state[co->index].uart_port;
 	struct clps711x_port *s = dev_get_drvdata(port->dev);
+	u32 sysflg = 0;
 
 	uart_console_write(port, c, n, uart_clps711x_console_putchar);
 
 	/* Wait for transmitter to become empty */
-	while (1) {
-		u32 sysflg = 0;
-
+	do {
 		regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
-		if (!(sysflg & SYSFLG_UBUSY))
-			break;
-		cond_resched();
-	}
+	} while (sysflg & SYSFLG_UBUSY);
 }
 
 static int uart_clps711x_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index 028582e924a5..c167a710dc39 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -798,6 +798,9 @@ static int efm32_uart_remove(struct platform_device *pdev)
 
 static const struct of_device_id efm32_uart_dt_ids[] = {
 	{
+		.compatible = "energymicro,efm32-uart",
+	}, {
+		/* doesn't follow the "vendor,device" scheme, don't use */
 		.compatible = "efm32,uart",
 	}, {
 		/* sentinel */
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index dd8b1a5458ff..08b6b9419f0d 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -225,14 +225,19 @@ static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up,
 	if (enable)
 		enable_irq(up->wakeirq);
 	else
-		disable_irq(up->wakeirq);
+		disable_irq_nosync(up->wakeirq);
 }
 
 static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
 {
 	struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
 
+	if (enable == up->wakeups_enabled)
+		return;
+
 	serial_omap_enable_wakeirq(up, enable);
+	up->wakeups_enabled = enable;
+
 	if (!pdata || !pdata->enable_wakeup)
 		return;
 
@@ -1495,6 +1500,11 @@ static int serial_omap_suspend(struct device *dev)
 	uart_suspend_port(&serial_omap_reg, &up->port);
 	flush_work(&up->qos_work);
 
+	if (device_may_wakeup(dev))
+		serial_omap_enable_wakeup(up, true);
+	else
+		serial_omap_enable_wakeup(up, false);
+
 	return 0;
 }
 
@@ -1502,6 +1512,9 @@ static int serial_omap_resume(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
 
+	if (device_may_wakeup(dev))
+		serial_omap_enable_wakeup(up, false);
+
 	uart_resume_port(&serial_omap_reg, &up->port);
 
 	return 0;
@@ -1789,6 +1802,7 @@ static int serial_omap_remove(struct platform_device *dev)
 	pm_runtime_disable(up->dev);
 	uart_remove_one_port(&serial_omap_reg, &up->port);
 	pm_qos_remove_request(&up->pm_qos_request);
+	device_init_wakeup(&dev->dev, false);
 
 	return 0;
 }
@@ -1877,17 +1891,7 @@ static int serial_omap_runtime_suspend(struct device *dev)
 
 	up->context_loss_cnt = serial_omap_get_context_loss_count(up);
 
-	if (device_may_wakeup(dev)) {
-		if (!up->wakeups_enabled) {
-			serial_omap_enable_wakeup(up, true);
-			up->wakeups_enabled = true;
-		}
-	} else {
-		if (up->wakeups_enabled) {
-			serial_omap_enable_wakeup(up, false);
-			up->wakeups_enabled = false;
-		}
-	}
+	serial_omap_enable_wakeup(up, true);
 
 	up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
 	schedule_work(&up->qos_work);
@@ -1901,6 +1905,8 @@ static int serial_omap_runtime_resume(struct device *dev)
 
 	int loss_cnt = serial_omap_get_context_loss_count(up);
 
+	serial_omap_enable_wakeup(up, false);
+
 	if (loss_cnt < 0) {
 		dev_dbg(dev, "serial_omap_get_context_loss_count failed : %d\n",
 			loss_cnt);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 2cf5649a6dc0..f26834d262b3 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -89,8 +89,7 @@ static void __uart_start(struct tty_struct *tty)
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *port = state->uart_port;
 
-	if (!uart_circ_empty(&state->xmit) && state->xmit.buf &&
-	    !tty->stopped && !tty->hw_stopped)
+	if (!tty->stopped && !tty->hw_stopped)
 		port->ops->start_tx(port);
 }
 
@@ -1452,6 +1451,8 @@ static void uart_hangup(struct tty_struct *tty)
 		clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 		spin_unlock_irqrestore(&port->lock, flags);
 		tty_port_tty_set(port, NULL);
+		if (!uart_console(state->uart_port))
+			uart_change_pm(state, UART_PM_STATE_OFF);
 		wake_up_interruptible(&port->open_wait);
 		wake_up_interruptible(&port->delta_msr_wait);
 	}
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 21e6e84c0df8..dd3a96e07026 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -295,7 +295,7 @@ static void asc_receive_chars(struct uart_port *port)
 			status & ASC_STA_OE) {
 
 			if (c & ASC_RXBUF_FE) {
-				if (c == ASC_RXBUF_FE) {
+				if (c == (ASC_RXBUF_FE | ASC_RXBUF_DUMMY_RX)) {
 					port->icount.brk++;
 					if (uart_handle_break(port))
 						continue;
@@ -325,7 +325,7 @@ static void asc_receive_chars(struct uart_port *port)
 				flag = TTY_FRAME;
 		}
 
-		if (uart_handle_sysrq_char(port, c))
+		if (uart_handle_sysrq_char(port, c & 0xff))
 			continue;
 
 		uart_insert_char(port, c, ASC_RXBUF_DUMMY_OE, c & 0xff, flag);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index d3448a90f0f9..34110719fe03 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -878,9 +878,8 @@ void disassociate_ctty(int on_exit)
 	spin_lock_irq(&current->sighand->siglock);
 	put_pid(current->signal->tty_old_pgrp);
 	current->signal->tty_old_pgrp = NULL;
-	spin_unlock_irq(&current->sighand->siglock);
 
-	tty = get_current_tty();
+	tty = tty_kref_get(current->signal->tty);
 	if (tty) {
 		unsigned long flags;
 		spin_lock_irqsave(&tty->ctrl_lock, flags);
@@ -897,6 +896,7 @@ void disassociate_ctty(int on_exit)
 #endif
 	}
 
+	spin_unlock_irq(&current->sighand->siglock);
 	/* Now clear signal->tty under the lock */
 	read_lock(&tasklist_lock);
 	session_clear_tty(task_session(current));
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 900f7ff805ee..904efb6035b0 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -518,13 +518,16 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)
 	if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) {
 		dev_err(&acm->control->dev,
 			"%s - usb_submit_urb(ctrl irq) failed\n", __func__);
+		usb_autopm_put_interface(acm->control);
 		goto error_submit_urb;
 	}
 
 	acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS;
 	if (acm_set_control(acm, acm->ctrlout) < 0 &&
-	    (acm->ctrl_caps & USB_CDC_CAP_LINE))
+	    (acm->ctrl_caps & USB_CDC_CAP_LINE)) {
+		usb_autopm_put_interface(acm->control);
 		goto error_set_control;
+	}
 
 	usb_autopm_put_interface(acm->control);
 
@@ -549,7 +552,6 @@ error_submit_read_urbs:
 error_set_control:
 	usb_kill_urb(acm->ctrlurb);
 error_submit_urb:
-	usb_autopm_put_interface(acm->control);
 error_get_interface:
 disconnected:
 	mutex_unlock(&acm->mutex);
@@ -1652,13 +1654,27 @@ static const struct usb_device_id acm_ids[] = {
 	},
 	/* Motorola H24 HSPA module: */
 	{ USB_DEVICE(0x22b8, 0x2d91) }, /* modem                                */
-	{ USB_DEVICE(0x22b8, 0x2d92) }, /* modem           + diagnostics        */
-	{ USB_DEVICE(0x22b8, 0x2d93) }, /* modem + AT port                      */
-	{ USB_DEVICE(0x22b8, 0x2d95) }, /* modem + AT port + diagnostics        */
-	{ USB_DEVICE(0x22b8, 0x2d96) }, /* modem                         + NMEA */
-	{ USB_DEVICE(0x22b8, 0x2d97) }, /* modem           + diagnostics + NMEA */
-	{ USB_DEVICE(0x22b8, 0x2d99) }, /* modem + AT port               + NMEA */
-	{ USB_DEVICE(0x22b8, 0x2d9a) }, /* modem + AT port + diagnostics + NMEA */
+	{ USB_DEVICE(0x22b8, 0x2d92),   /* modem           + diagnostics        */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d93),   /* modem + AT port                      */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d95),   /* modem + AT port + diagnostics        */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d96),   /* modem                         + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d97),   /* modem           + diagnostics + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d99),   /* modem + AT port               + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
+	{ USB_DEVICE(0x22b8, 0x2d9a),   /* modem + AT port + diagnostics + NMEA */
+	.driver_info = NO_UNION_NORMAL, /* handle only modem interface          */
+	},
 
 	{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
 	.driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index d59d99347d54..1f02e65fe305 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -75,7 +75,7 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
 				PCI_SLOT(companion->devfn) != slot)
 			continue;
 		companion_hcd = pci_get_drvdata(companion);
-		if (!companion_hcd)
+		if (!companion_hcd || !companion_hcd->self.root_hub)
 			continue;
 		fn(pdev, hcd, companion, companion_hcd);
 	}
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index d1d8c47777c5..7f425acd9be5 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -212,6 +212,8 @@ static int exynos_ehci_suspend(struct device *dev)
 	int rc;
 
 	rc = ehci_suspend(hcd, do_wakeup);
+	if (rc)
+		return rc;
 
 	if (exynos_ehci->otg)
 		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index b3a0e11073aa..c7dd93aad20c 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -303,6 +303,8 @@ static int ehci_platform_suspend(struct device *dev)
 	int ret;
 
 	ret = ehci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
 
 	if (pdata->power_suspend)
 		pdata->power_suspend(pdev);
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 27ac6ad53c3d..7ef00ecb0da1 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -509,8 +509,31 @@ static struct platform_driver tegra_ehci_driver = {
 	}
 };
 
+static int tegra_ehci_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+	int txfifothresh;
+
+	retval = ehci_setup(hcd);
+	if (retval)
+		return retval;
+
+	/*
+	 * We should really pull this value out of tegra_ehci_soc_config, but
+	 * to avoid needing access to it, make use of the fact that Tegra20 is
+	 * the only one so far that needs a value of 10, and Tegra20 is the
+	 * only one which doesn't set has_hostpc.
+	 */
+	txfifothresh = ehci->has_hostpc ? 0x10 : 10;
+	ehci_writel(ehci, txfifothresh << 16, &ehci->regs->txfill_tuning);
+
+	return 0;
+}
+
 static const struct ehci_driver_overrides tegra_overrides __initconst = {
 	.extra_priv_size	= sizeof(struct tegra_ehci_hcd),
+	.reset			= tegra_ehci_reset,
 };
 
 static int __init ehci_tegra_init(void)
diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c
index af8dc1b92d75..c2c221a332eb 100644
--- a/drivers/usb/host/ohci-jz4740.c
+++ b/drivers/usb/host/ohci-jz4740.c
@@ -82,14 +82,14 @@ static int ohci_jz4740_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	u16 wIndex, char *buf, u16 wLength)
 {
 	struct jz4740_ohci_hcd *jz4740_ohci = hcd_to_jz4740_hcd(hcd);
-	int ret;
+	int ret = 0;
 
 	switch (typeReq) {
-	case SetHubFeature:
+	case SetPortFeature:
 		if (wValue == USB_PORT_FEAT_POWER)
 			ret = ohci_jz4740_set_vbus_power(jz4740_ohci, true);
 		break;
-	case ClearHubFeature:
+	case ClearPortFeature:
 		if (wValue == USB_PORT_FEAT_POWER)
 			ret = ohci_jz4740_set_vbus_power(jz4740_ohci, false);
 		break;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 95fa1217afdd..762e4a5f5ae9 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -104,6 +104,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
+	{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
 	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 44ab12986805..7c6e1dedeb06 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -909,6 +909,39 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
 	/* Cressi Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) },
+	/* Brainboxes Devices */
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_001_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_012_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_023_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_034_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_101_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_4_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_5_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_6_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_7_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_8_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_257_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_4_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_313_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_324_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_357_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_1_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) },
+	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e599fbfcde5f..993c93df6874 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1326,3 +1326,40 @@
  * Manufacturer: Cressi
  */
 #define FTDI_CRESSI_PID		0x87d0
+
+/*
+ * Brainboxes devices
+ */
+#define BRAINBOXES_VID			0x05d1
+#define BRAINBOXES_VX_001_PID		0x1001 /* VX-001 ExpressCard 1 Port RS232 */
+#define BRAINBOXES_VX_012_PID		0x1002 /* VX-012 ExpressCard 2 Port RS232 */
+#define BRAINBOXES_VX_023_PID		0x1003 /* VX-023 ExpressCard 1 Port RS422/485 */
+#define BRAINBOXES_VX_034_PID		0x1004 /* VX-034 ExpressCard 2 Port RS422/485 */
+#define BRAINBOXES_US_101_PID		0x1011 /* US-101 1xRS232 */
+#define BRAINBOXES_US_324_PID		0x1013 /* US-324 1xRS422/485 1Mbaud */
+#define BRAINBOXES_US_606_1_PID		0x2001 /* US-606 6 Port RS232 Serial Port 1 and 2 */
+#define BRAINBOXES_US_606_2_PID		0x2002 /* US-606 6 Port RS232 Serial Port 3 and 4 */
+#define BRAINBOXES_US_606_3_PID		0x2003 /* US-606 6 Port RS232 Serial Port 4 and 6 */
+#define BRAINBOXES_US_701_1_PID		0x2011 /* US-701 4xRS232 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_701_2_PID		0x2012 /* US-701 4xRS422 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_279_1_PID		0x2021 /* US-279 8xRS422 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_279_2_PID		0x2022 /* US-279 8xRS422 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_279_3_PID		0x2023 /* US-279 8xRS422 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_279_4_PID		0x2024 /* US-279 8xRS422 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_346_1_PID		0x3011 /* US-346 4xRS422/485 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_346_2_PID		0x3012 /* US-346 4xRS422/485 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_257_PID		0x5001 /* US-257 2xRS232 1Mbaud */
+#define BRAINBOXES_US_313_PID		0x6001 /* US-313 2xRS422/485 1Mbaud */
+#define BRAINBOXES_US_357_PID		0x7001 /* US_357 1xRS232/422/485 */
+#define BRAINBOXES_US_842_1_PID		0x8001 /* US-842 8xRS422/485 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_842_2_PID		0x8002 /* US-842 8xRS422/485 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_842_3_PID		0x8003 /* US-842 8xRS422/485 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_842_4_PID		0x8004 /* US-842 8xRS422/485 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_160_1_PID		0x9001 /* US-160 16xRS232 1Mbaud Port 1 and 2 */
+#define BRAINBOXES_US_160_2_PID		0x9002 /* US-160 16xRS232 1Mbaud Port 3 and 4 */
+#define BRAINBOXES_US_160_3_PID		0x9003 /* US-160 16xRS232 1Mbaud Port 5 and 6 */
+#define BRAINBOXES_US_160_4_PID		0x9004 /* US-160 16xRS232 1Mbaud Port 7 and 8 */
+#define BRAINBOXES_US_160_5_PID		0x9005 /* US-160 16xRS232 1Mbaud Port 9 and 10 */
+#define BRAINBOXES_US_160_6_PID		0x9006 /* US-160 16xRS232 1Mbaud Port 11 and 12 */
+#define BRAINBOXES_US_160_7_PID		0x9007 /* US-160 16xRS232 1Mbaud Port 13 and 14 */
+#define BRAINBOXES_US_160_8_PID		0x9008 /* US-160 16xRS232 1Mbaud Port 15 and 16 */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 68fc9fe65936..367c7f08b27c 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -243,6 +243,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_CC864_DUAL		0x1005
 #define TELIT_PRODUCT_CC864_SINGLE		0x1006
 #define TELIT_PRODUCT_DE910_DUAL		0x1010
+#define TELIT_PRODUCT_UE910_V2			0x1012
 #define TELIT_PRODUCT_LE920			0x1200
 
 /* ZTE PRODUCTS */
@@ -1041,6 +1042,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
 		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 2e22fc22c382..b3d5a35c0d4b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -83,6 +83,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
 	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
 	{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 	{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index c38b8c00c06f..42bc082896ac 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -121,8 +121,11 @@
 #define SUPERIAL_VENDOR_ID	0x5372
 #define SUPERIAL_PRODUCT_ID	0x2303
 
-/* Hewlett-Packard LD220-HP POS Pole Display */
+/* Hewlett-Packard POS Pole Displays */
 #define HP_VENDOR_ID		0x03f0
+#define HP_LD960_PRODUCT_ID	0x0b39
+#define HP_LCM220_PRODUCT_ID	0x3139
+#define HP_LCM960_PRODUCT_ID	0x3239
 #define HP_LD220_PRODUCT_ID	0x3524
 
 /* Cressi Edy (diving computer) PC interface */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index a9eb6221a815..6b192e602ce0 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -291,7 +291,6 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
-       { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
 };
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 640fe0173236..b078440e822f 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -466,6 +466,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	int err;
 	int i;
 
+	if (!port->bulk_in_size || !port->bulk_out_size)
+		return -ENODEV;
+
 	portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
 	if (!portdata)
 		return -ENOMEM;
@@ -473,9 +476,6 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	init_usb_anchor(&portdata->delayed);
 
 	for (i = 0; i < N_IN_URB; i++) {
-		if (!port->bulk_in_size)
-			break;
-
 		buffer = (u8 *)__get_free_page(GFP_KERNEL);
 		if (!buffer)
 			goto bail_out_error;
@@ -489,9 +489,6 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	}
 
 	for (i = 0; i < N_OUT_URB; i++) {
-		if (!port->bulk_out_size)
-			break;
-
 		buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
 		if (!buffer)
 			goto bail_out_error2;
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index a7ac97cc5949..511b22953167 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -137,7 +137,7 @@ static void uas_do_work(struct work_struct *work)
 		if (!(cmdinfo->state & IS_IN_WORK_LIST))
 			continue;
 
-		err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
+		err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
 		if (!err)
 			cmdinfo->state &= ~IS_IN_WORK_LIST;
 		else
@@ -803,7 +803,7 @@ static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd,
 
 	devinfo->running_task = 1;
 	memset(&devinfo->response, 0, sizeof(devinfo->response));
-	sense_urb = uas_submit_sense_urb(cmnd, GFP_NOIO,
+	sense_urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC,
 					 devinfo->use_streams ? tag : 0);
 	if (!sense_urb) {
 		shost_printk(KERN_INFO, shost,
@@ -813,7 +813,7 @@ static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd,
 		spin_unlock_irqrestore(&devinfo->lock, flags);
 		return FAILED;
 	}
-	if (uas_submit_task_urb(cmnd, GFP_NOIO, function, tag)) {
+	if (uas_submit_task_urb(cmnd, GFP_ATOMIC, function, tag)) {
 		shost_printk(KERN_INFO, shost,
 			     "%s: %s: submit task mgmt urb failed\n",
 			     __func__, fname);
@@ -1030,7 +1030,7 @@ static int uas_configure_endpoints(struct uas_dev_info *devinfo)
 		devinfo->use_streams = 0;
 	} else {
 		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
-						    3, 256, GFP_KERNEL);
+						    3, 256, GFP_NOIO);
 		if (devinfo->qdepth < 0)
 			return devinfo->qdepth;
 		devinfo->use_streams = 1;
@@ -1047,7 +1047,7 @@ static void uas_free_streams(struct uas_dev_info *devinfo)
 	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
 	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
 	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
-	usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL);
+	usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
 }
 
 static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -1096,16 +1096,17 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (result)
 		goto free_streams;
 
+	usb_set_intfdata(intf, shost);
 	result = scsi_add_host(shost, &intf->dev);
 	if (result)
 		goto free_streams;
 
 	scsi_scan_host(shost);
-	usb_set_intfdata(intf, shost);
 	return result;
 
 free_streams:
 	uas_free_streams(devinfo);
+	usb_set_intfdata(intf, NULL);
 set_alt0:
 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
 	if (shost)
diff --git a/drivers/usb/usb-common.c b/drivers/usb/usb-common.c
index d771870a819e..6dfd30a863c7 100644
--- a/drivers/usb/usb-common.c
+++ b/drivers/usb/usb-common.c
@@ -69,7 +69,7 @@ const char *usb_state_string(enum usb_device_state state)
 		[USB_STATE_RECONNECTING] = "reconnecting",
 		[USB_STATE_UNAUTHENTICATED] = "unauthenticated",
 		[USB_STATE_DEFAULT] = "default",
-		[USB_STATE_ADDRESS] = "addresssed",
+		[USB_STATE_ADDRESS] = "addressed",
 		[USB_STATE_CONFIGURED] = "configured",
 		[USB_STATE_SUSPENDED] = "suspended",
 	};
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
index 16ada8341c46..1a2fd9795367 100644
--- a/drivers/uwb/drp.c
+++ b/drivers/uwb/drp.c
@@ -599,8 +599,11 @@ static void uwb_drp_handle_alien_drp(struct uwb_rc *rc, struct uwb_ie_drp *drp_i
 
 	/* alloc and initialize new uwb_cnflt_alien */
 	cnflt = kzalloc(sizeof(struct uwb_cnflt_alien), GFP_KERNEL);
-	if (!cnflt)
+	if (!cnflt) {
 		dev_err(dev, "failed to alloc uwb_cnflt_alien struct\n");
+		return;
+	}
+
 	INIT_LIST_HEAD(&cnflt->rc_node);
 	init_timer(&cnflt->timer);
 	cnflt->timer.function = uwb_cnflt_timer;
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6c793bc683d9..c7b4f0f927b1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -21,7 +21,15 @@ source "drivers/gpu/vga/Kconfig"
 
 source "drivers/gpu/host1x/Kconfig"
 
+menu "Direct Rendering Manager"
 source "drivers/gpu/drm/Kconfig"
+endmenu
+
+menu "Frame buffer Devices"
+source "drivers/video/fbdev/Kconfig"
+endmenu
+
+source "drivers/video/backlight/Kconfig"
 
 config VGASTATE
        tristate
@@ -33,2482 +41,14 @@ config VIDEOMODE_HELPERS
 config HDMI
 	bool
 
-menuconfig FB
-	tristate "Support for frame buffer devices"
-	---help---
-	  The frame buffer device provides an abstraction for the graphics
-	  hardware. It represents the frame buffer of some video hardware and
-	  allows application software to access the graphics hardware through
-	  a well-defined interface, so the software doesn't need to know
-	  anything about the low-level (hardware register) stuff.
-
-	  Frame buffer devices work identically across the different
-	  architectures supported by Linux and make the implementation of
-	  application programs easier and more portable; at this point, an X
-	  server exists which uses the frame buffer device exclusively.
-	  On several non-X86 architectures, the frame buffer device is the
-	  only way to use the graphics hardware.
-
-	  The device is accessed through special device nodes, usually located
-	  in the /dev directory, i.e. /dev/fb*.
-
-	  You need an utility program called fbset to make full use of frame
-	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-	  and the Framebuffer-HOWTO at
-	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
-	  information.
-
-	  Say Y here and to the driver for your graphics board below if you
-	  are compiling a kernel for a non-x86 architecture.
-
-	  If you are compiling for the x86 architecture, you can say Y if you
-	  want to play with it, but it is not essential. Please note that
-	  running graphical applications that directly touch the hardware
-	  (e.g. an accelerated X server) and that are not frame buffer
-	  device-aware may cause unexpected results. If unsure, say N.
-
-config FIRMWARE_EDID
-       bool "Enable firmware EDID"
-       depends on FB
-       default n
-       ---help---
-         This enables access to the EDID transferred from the firmware.
-	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
-	 transfers do not work for your driver and if you are using
-	 nvidiafb, i810fb or savagefb.
-
-	 In general, choosing Y for this option is safe.  If you
-	 experience extremely long delays while booting before you get
-	 something on your display, try setting this to N.  Matrox cards in
-	 combination with certain motherboards and monitors are known to
-	 suffer from this problem.
-
-config FB_DDC
-       tristate
-       depends on FB
-       select I2C_ALGOBIT
-       select I2C
-       default n
-
-config FB_BOOT_VESA_SUPPORT
-	bool
-	depends on FB
-	default n
-	---help---
-	  If true, at least one selected framebuffer driver can take advantage
-	  of VESA video modes set at an early boot stage via the vga= parameter.
-
-config FB_CFB_FILLRECT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the cfb_fillrect function for generic software rectangle
-	  filling. This is used by drivers that don't provide their own
-	  (accelerated) version.
-
-config FB_CFB_COPYAREA
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the cfb_copyarea function for generic software area copying.
-	  This is used by drivers that don't provide their own (accelerated)
-	  version.
-
-config FB_CFB_IMAGEBLIT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the cfb_imageblit function for generic software image
-	  blitting. This is used by drivers that don't provide their own
-	  (accelerated) version.
-
-config FB_CFB_REV_PIXELS_IN_BYTE
-	bool
-	depends on FB
-	default n
-	---help---
-	  Allow generic frame-buffer functions to work on displays with 1, 2
-	  and 4 bits per pixel depths which has opposite order of pixels in
-	  byte order to bytes in long order.
-
-config FB_SYS_FILLRECT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the sys_fillrect function for generic software rectangle
-	  filling. This is used by drivers that don't provide their own
-	  (accelerated) version and the framebuffer is in system RAM.
-
-config FB_SYS_COPYAREA
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the sys_copyarea function for generic software area copying.
-	  This is used by drivers that don't provide their own (accelerated)
-	  version and the framebuffer is in system RAM.
-
-config FB_SYS_IMAGEBLIT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the sys_imageblit function for generic software image
-	  blitting. This is used by drivers that don't provide their own
-	  (accelerated) version and the framebuffer is in system RAM.
-
-menuconfig FB_FOREIGN_ENDIAN
-	bool "Framebuffer foreign endianness support"
-	depends on FB
-	---help---
-	  This menu will let you enable support for the framebuffers with
-	  non-native endianness (e.g. Little-Endian framebuffer on a
-	  Big-Endian machine). Most probably you don't have such hardware,
-	  so it's safe to say "n" here.
-
-choice
-	prompt "Choice endianness support"
-	depends on FB_FOREIGN_ENDIAN
-
-config FB_BOTH_ENDIAN
-	bool "Support for Big- and Little-Endian framebuffers"
-
-config FB_BIG_ENDIAN
-	bool "Support for Big-Endian framebuffers only"
-
-config FB_LITTLE_ENDIAN
-	bool "Support for Little-Endian framebuffers only"
-
-endchoice
-
-config FB_SYS_FOPS
-       tristate
-       depends on FB
-       default n
-
-config FB_DEFERRED_IO
-	bool
-	depends on FB
-
-config FB_HECUBA
-	tristate
-	depends on FB
-	depends on FB_DEFERRED_IO
-
-config FB_SVGALIB
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Common utility functions useful to fbdev drivers of VGA-based
-	  cards.
-
-config FB_MACMODES
-       tristate
-       depends on FB
-       default n
-
-config FB_BACKLIGHT
-	bool
-	depends on FB
-	select BACKLIGHT_LCD_SUPPORT
-	select BACKLIGHT_CLASS_DEVICE
-	default n
-
-config FB_MODE_HELPERS
-        bool "Enable Video Mode Handling Helpers"
-        depends on FB
-	default n
-	---help---
-	  This enables functions for handling video modes using the
-	  Generalized Timing Formula and the EDID parser. A few drivers rely
-          on this feature such as the radeonfb, rivafb, and the i810fb. If
-	  your driver does not take advantage of this feature, choosing Y will
-	  just increase the kernel size by about 5K.
-
-config FB_TILEBLITTING
-       bool "Enable Tile Blitting Support"
-       depends on FB
-       default n
-       ---help---
-         This enables tile blitting.  Tile blitting is a drawing technique
-	 where the screen is divided into rectangular sections (tiles), whereas
-	 the standard blitting divides the screen into pixels. Because the
-	 default drawing element is a tile, drawing functions will be passed
-	 parameters in terms of number of tiles instead of number of pixels.
-	 For example, to draw a single character, instead of using bitmaps,
-	 an index to an array of bitmaps will be used.  To clear or move a
-	 rectangular section of a screen, the rectangle will be described in
-	 terms of number of tiles in the x- and y-axis.
-
-	 This is particularly important to one driver, matroxfb.  If
-	 unsure, say N.
-
-comment "Frame buffer hardware drivers"
-	depends on FB
-
-config FB_GRVGA
-	tristate "Aeroflex Gaisler framebuffer support"
-	depends on FB && SPARC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
-
-config FB_CIRRUS
-	tristate "Cirrus Logic support"
-	depends on FB && (ZORRO || PCI)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  This enables support for Cirrus Logic GD542x/543x based boards on
-	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
-
-	  If you have a PCI-based system, this enables support for these
-	  chips: GD-543x, GD-544x, GD-5480.
-
-	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
-
-	  Say N unless you have such a graphics board or plan to get one
-	  before you next recompile the kernel.
-
-config FB_PM2
-	tristate "Permedia2 support"
-	depends on FB && ((AMIGA && BROKEN) || PCI)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for cards based on
-	  the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
-	  The driver was tested on the following cards:
-		Diamond FireGL 1000 PRO AGP
-		ELSA Gloria Synergy PCI
-		Appian Jeronimo PRO (both heads) PCI
-		3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
-		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
-		ASK Graphic Blaster Exxtreme AGP
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pm2fb.
-
-config FB_PM2_FIFO_DISCONNECT
-	bool "enable FIFO disconnect feature"
-	depends on FB_PM2 && PCI
-	help
-	  Support the Permedia2 FIFO disconnect feature.
-
-config FB_ARMCLCD
-	tristate "ARM PrimeCell PL110 support"
-	depends on ARM || ARM64 || COMPILE_TEST
-	depends on FB && ARM_AMBA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This framebuffer device driver is for the ARM PrimeCell PL110
-	  Colour LCD controller.  ARM PrimeCells provide the building
-	  blocks for System on a Chip devices.
-
-	  If you want to compile this as a module (=code which can be
-	  inserted into and removed from the running kernel), say M
-	  here and read <file:Documentation/kbuild/modules.txt>.  The module
-	  will be called amba-clcd.
-
-config FB_ACORN
-	bool "Acorn VIDC support"
-	depends on (FB = y) && ARM && ARCH_ACORN
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Acorn VIDC graphics
-	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
-	  unsure, say N.
-
-config FB_CLPS711X
-	bool "CLPS711X LCD support"
-	depends on (FB = y) && ARM && ARCH_CLPS711X
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y to enable the Framebuffer driver for the CLPS7111 and
-	  EP7212 processors.
-
-config FB_SA1100
-	bool "SA-1100 LCD support"
-	depends on (FB = y) && ARM && ARCH_SA1100
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is a framebuffer device for the SA-1100 LCD Controller.
-	  See <http://www.linux-fbdev.org/> for information on framebuffer
-	  devices.
-
-	  If you plan to use the LCD display with your SA-1100 system, say
-	  Y here.
-
-config FB_IMX
-	tristate "Freescale i.MX1/21/25/27 LCD support"
-	depends on FB && ARCH_MXC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-
-config FB_CYBER2000
-	tristate "CyberPro 2000/2010/5000 support"
-	depends on FB && PCI && (BROKEN || !SPARC64)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This enables support for the Integraphics CyberPro 20x0 and 5000
-	  VGA chips used in the Rebel.com Netwinder and other machines.
-	  Say Y if you have a NetWinder or a graphics card containing this
-	  device, otherwise say N.
-
-config FB_CYBER2000_DDC
-	bool "DDC for CyberPro support"
-	depends on FB_CYBER2000
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC support for your CyberPro graphics
-	  card. This is only I2C bus support, driver does not use EDID.
-
-config FB_CYBER2000_I2C
-	bool "CyberPro 2000/2010/5000 I2C support"
-	depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
-	select I2C_ALGOBIT
-	help
-	  Enable support for the I2C video decoder interface on the
-	  Integraphics CyberPro 20x0 and 5000 VGA chips.  This is used
-	  on the Netwinder machines for the SAA7111 video capture.
-
-config FB_APOLLO
-	bool
-	depends on (FB = y) && APOLLO
-	default y
-	select FB_CFB_FILLRECT
-	select FB_CFB_IMAGEBLIT
-
-config FB_Q40
-	bool
-	depends on (FB = y) && Q40
-	default y
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-
-config FB_AMIGA
-	tristate "Amiga native chipset support"
-	depends on FB && AMIGA
-	help
-	  This is the frame buffer device driver for the builtin graphics
-	  chipset found in Amigas.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called amifb.
-
-config FB_AMIGA_OCS
-	bool "Amiga OCS chipset support"
-	depends on FB_AMIGA
-	help
-	  This enables support for the original Agnus and Denise video chips,
-	  found in the Amiga 1000 and most A500's and A2000's. If you intend
-	  to run Linux on any of these systems, say Y; otherwise say N.
-
-config FB_AMIGA_ECS
-	bool "Amiga ECS chipset support"
-	depends on FB_AMIGA
-	help
-	  This enables support for the Enhanced Chip Set, found in later
-	  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
-	  you intend to run Linux on any of these systems, say Y; otherwise
-	  say N.
-
-config FB_AMIGA_AGA
-	bool "Amiga AGA chipset support"
-	depends on FB_AMIGA
-	help
-	  This enables support for the Advanced Graphics Architecture (also
-	  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
-	  and CD32. If you intend to run Linux on any of these systems, say Y;
-	  otherwise say N.
-
-config FB_FM2
-	bool "Amiga FrameMaster II/Rainbow II support"
-	depends on (FB = y) && ZORRO
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Amiga FrameMaster
-	  card from BSC (exhibited 1992 but not shipped as a CBM product).
-
-config FB_ARC
-	tristate "Arc Monochrome LCD board support"
-	depends on FB && X86
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  This enables support for the Arc Monochrome LCD board. The board
-	  is based on the KS-108 lcd controller and is typically a matrix
-	  of 2*n chips. This driver was tested with a 128x64 panel. This
-	  driver supports it for use with x86 SBCs through a 16 bit GPIO
-	  interface (8 bit data, 8 bit control). If you anticipate using
-	  this driver, say Y or M; otherwise say N. You must specify the
-	  GPIO IO address to be used for setting control and data.
-
-config FB_ATARI
-	bool "Atari native chipset support"
-	depends on (FB = y) && ATARI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the builtin graphics
-	  chipset found in Ataris.
-
-config FB_OF
-	bool "Open Firmware frame buffer device support"
-	depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  Say Y if you want support with Open Firmware for your graphics
-	  board.
-
-config FB_CONTROL
-	bool "Apple \"control\" display support"
-	depends on (FB = y) && PPC_PMAC && PPC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  This driver supports a frame buffer for the graphics adapter in the
-	  Power Macintosh 7300 and others.
-
-config FB_PLATINUM
-	bool "Apple \"platinum\" display support"
-	depends on (FB = y) && PPC_PMAC && PPC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  This driver supports a frame buffer for the "platinum" graphics
-	  adapter in some Power Macintoshes.
-
-config FB_VALKYRIE
-	bool "Apple \"valkyrie\" display support"
-	depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  This driver supports a frame buffer for the "valkyrie" graphics
-	  adapter in some Power Macintoshes.
-
-config FB_CT65550
-	bool "Chips 65550 display support"
-	depends on (FB = y) && PPC32 && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Chips & Technologies
-	  65550 graphics chip in PowerBooks.
-
-config FB_ASILIANT
-	bool "Asiliant (Chips) 69000 display support"
-	depends on (FB = y) && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Asiliant 69030 chipset
-
-config FB_IMSTT
-	bool "IMS Twin Turbo display support"
-	depends on (FB = y) && PCI
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES if PPC
-	help
-	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
-	  many Macintosh and compatible computers.
-
-config FB_VGA16
-	tristate "VGA 16-color graphics support"
-	depends on FB && (X86 || PPC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	help
-	  This is the frame buffer device driver for VGA 16 color graphic
-	  cards. Say Y if you have such a card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vga16fb.
-
-config FB_BF54X_LQ043
-	tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
-	depends on FB && (BF54x) && !BF542
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
-
-config FB_BFIN_T350MCQB
-	tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
-	depends on FB && BLACKFIN
-	select BFIN_GPTIMERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
-	 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
-	 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-config FB_BFIN_LQ035Q1
-	tristate "SHARP LQ035Q1DH02 TFT LCD"
-	depends on FB && BLACKFIN && SPI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BFIN_GPTIMERS
-	help
-	  This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
-	  the Blackfin Landscape LCD EZ-Extender Card.
-	  This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
-	  It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin-lq035q1-fb.
-
-config FB_BF537_LQ035
-	tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
-	depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BFIN_GPTIMERS
-	help
-	  This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
-	  attached to a BF537.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bf537-lq035.
-
-config FB_BFIN_7393
-	tristate "Blackfin ADV7393 Video encoder"
-	depends on FB && BLACKFIN
-	select I2C
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for a ADV7393 video encoder
-	  attached to a Blackfin on the PPI port.
-	  If your Blackfin board has a ADV7393 select Y.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_adv7393fb.
-
-choice
-	prompt  "Video mode support"
-	depends on FB_BFIN_7393
-	default NTSC
-
-config NTSC
-	bool 'NTSC 720x480'
-
-config PAL
-	bool 'PAL 720x576'
-
-config NTSC_640x480
-	bool 'NTSC 640x480 (Experimental)'
-
-config PAL_640x480
-	bool 'PAL 640x480 (Experimental)'
-
-config NTSC_YCBCR
-	bool 'NTSC 720x480 YCbCR input'
-
-config PAL_YCBCR
-	bool 'PAL 720x576 YCbCR input'
-
-endchoice
-
-choice
-	prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
-	depends on (FB_BFIN_7393)
-	default ADV7393_1XMEM
-
-config ADV7393_1XMEM
-	bool 'Single'
-
-config ADV7393_2XMEM
-	bool 'Double'
-endchoice
-
-config FB_STI
-	tristate "HP STI frame buffer device support"
-	depends on FB && PARISC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select STI_CONSOLE
-	select VT
-	default y
-	---help---
-	  STI refers to the HP "Standard Text Interface" which is a set of
-	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
-	  Enabling this option will implement the linux framebuffer device
-	  using calls to the STI BIOS routines for initialisation.
-	
-	  If you enable this option, you will get a planar framebuffer device
-	  /dev/fb which will work on the most common HP graphic cards of the
-	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
-	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
-
-	  It is safe to enable this option, so you should probably say "Y".
-
-config FB_MAC
-	bool "Generic Macintosh display support"
-	depends on (FB = y) && MAC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-
-config FB_HP300
-	bool
-	depends on (FB = y) && DIO
-	select FB_CFB_IMAGEBLIT
-	default y
-
-config FB_TGA
-	tristate "TGA/SFB+ framebuffer support"
-	depends on FB && (ALPHA || TC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BITREVERSE
-	---help---
-	  This is the frame buffer device driver for generic TGA and SFB+
-	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
-	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
-	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
-
-	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
-	  for DECstation 5000/200 systems.  Additionally due to firmware
-	  limitations these cards may cause troubles with booting DECstation
-	  5000/240 and /260 systems, but are fully supported under Linux if
-	  you manage to get it going. ;-)
-
-	  Say Y if you have one of those.
-
-config FB_UVESA
-	tristate "Userspace VESA VGA graphics support"
-	depends on FB && CONNECTOR
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	help
-	  This is the frame buffer driver for generic VBE 2.0 compliant
-	  graphic cards. It can also take advantage of VBE 3.0 features,
-	  such as refresh rate adjustment.
-
-	  This driver generally provides more features than vesafb but
-	  requires a userspace helper application called 'v86d'. See
-	  <file:Documentation/fb/uvesafb.txt> for more information.
-
-	  If unsure, say N.
-
-config FB_VESA
-	bool "VESA VGA graphics support"
-	depends on (FB = y) && X86
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT
-	help
-	  This is the frame buffer device driver for generic VESA 2.0
-	  compliant graphic cards. The older VESA 1.2 cards are not supported.
-	  You will get a boot time penguin logo at no additional cost. Please
-	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-
-config FB_EFI
-	bool "EFI-based Framebuffer Support"
-	depends on (FB = y) && X86 && EFI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the EFI frame buffer device driver. If the firmware on
-	  your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
-	  using the EFI framebuffer as your console.
-
-config FB_N411
-       tristate "N411 Apollo/Hecuba devkit support"
-       depends on FB && X86 && MMU
-       select FB_SYS_FILLRECT
-       select FB_SYS_COPYAREA
-       select FB_SYS_IMAGEBLIT
-       select FB_SYS_FOPS
-       select FB_DEFERRED_IO
-       select FB_HECUBA
-       help
-         This enables support for the Apollo display controller in its
-         Hecuba form using the n411 devkit.
-
-config FB_HGA
-	tristate "Hercules mono graphics support"
-	depends on FB && X86
-	help
-	  Say Y here if you have a Hercules mono graphics card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called hgafb.
-
-	  As this card technology is at least 25 years old,
-	  most people will answer N here.
-
-config FB_GBE
-	bool "SGI Graphics Backend frame buffer support"
-	depends on (FB = y) && SGI_IP32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
- 	help
-	  This is the frame buffer device driver for SGI Graphics Backend.
-	  This chip is used in SGI O2 and Visual Workstation 320/540.
-
-config FB_GBE_MEM
-	int "Video memory size in MB"
-	depends on FB_GBE
-	default 4
-	help
-	  This is the amount of memory reserved for the framebuffer,
-	  which can be any value between 1MB and 8MB.
-
-config FB_SBUS
-	bool "SBUS and UPA framebuffers"
-	depends on (FB = y) && SPARC
-	help
-	  Say Y if you want support for SBUS or UPA based frame buffer device.
-
-config FB_BW2
-	bool "BWtwo support"
-	depends on (FB = y) && (SPARC && FB_SBUS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the BWtwo frame buffer.
-
-config FB_CG3
-	bool "CGthree support"
-	depends on (FB = y) && (SPARC && FB_SBUS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGthree frame buffer.
-
-config FB_CG6
-	bool "CGsix (GX,TurboGX) support"
-	depends on (FB = y) && (SPARC && FB_SBUS)
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGsix (GX, TurboGX)
-	  frame buffer.
-
-config FB_FFB
-	bool "Creator/Creator3D/Elite3D support"
-	depends on FB_SBUS && SPARC64
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Creator, Creator3D,
-	  and Elite3D graphics boards.
-
-config FB_TCX
-	bool "TCX (SS4/SS5 only) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the TCX 24/8bit frame
-	  buffer.
-
-config FB_CG14
-	bool "CGfourteen (SX) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGfourteen frame
-	  buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
-	bool "P9100 (Sparcbook 3 only) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the P9100 card
-	  supported on Sparcbook 3 machines.
-
-config FB_LEO
-	bool "Leo (ZX) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the SBUS-based Sun ZX
-	  (leo) frame buffer cards.
-
-config FB_IGA
-	bool "IGA 168x display support"
-	depends on (FB = y) && SPARC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the INTERGRAPHICS 1680 and
-	  successor frame buffer cards.
-
-config FB_XVR500
-	bool "Sun XVR-500 3DLABS Wildcat support"
-	depends on (FB = y) && PCI && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-500 and similar
-	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-	  only works on sparc64 systems where the system firmware has
-	  mostly initialized the card already.  It is treated as a
-	  completely dumb framebuffer device.
-
-config FB_XVR2500
-	bool "Sun XVR-2500 3DLABS Wildcat support"
-	depends on (FB = y) && PCI && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-2500 and similar
-	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-	  only works on sparc64 systems where the system firmware has
-	  mostly initialized the card already.  It is treated as a
-	  completely dumb framebuffer device.
-
-config FB_XVR1000
-	bool "Sun XVR-1000 support"
-	depends on (FB = y) && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-1000 and similar
-	  graphics cards.  The driver only works on sparc64 systems where
-	  the system firmware has mostly initialized the card already.  It
-	  is treated as a completely dumb framebuffer device.
-
-config FB_PVR2
-	tristate "NEC PowerVR 2 display support"
-	depends on FB && SH_DREAMCAST
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
-	  run linux on your Dreamcast, you will have to say Y here.
-	  This driver may or may not work on other PowerVR 2 cards, but is
-	  totally untested.  Use at your own risk.  If unsure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pvr2fb.
-
-	  You can pass several parameters to the driver at boot time or at
-	  module load time.  The parameters look like "video=pvr2:XXX", where
-	  the meaning of XXX can be found at the end of the main source file
-	  (<file:drivers/video/pvr2fb.c>). Please see the file
-	  <file:Documentation/fb/pvr2fb.txt>.
-
-config FB_OPENCORES
-	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
-	depends on FB && HAS_DMA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This enables support for the OpenCores VGA/LCD core.
-
-	  The OpenCores VGA/LCD core is typically used together with
-	  softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
-	  systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
-
-	  The source code and specification for the core is available at
-	  <http://opencores.org/project,vga_lcd>
-
-config FB_S1D13XXX
-	tristate "Epson S1D13XXX framebuffer support"
-	depends on FB
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Support for S1D13XXX framebuffer device family (currently only
-	  working with S1D13806). Product specs at
-	  <http://vdc.epson.com/>
-
-config FB_ATMEL
-	tristate "AT91/AT32 LCD Controller support"
-	depends on FB && HAVE_FB_ATMEL
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This enables support for the AT91/AT32 LCD Controller.
-
-config FB_INTSRAM
-	bool "Frame Buffer in internal SRAM"
-	depends on FB_ATMEL && ARCH_AT91SAM9261
-	help
-	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
-	  to let frame buffer in external SDRAM.
-
-config FB_ATMEL_STN
-	bool "Use a STN display with AT91/AT32 LCD Controller"
-	depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
-	default n
-	help
-	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
-	  Controller. Say N if you want to connect a TFT.
-
-	  If unsure, say N.
-
-config FB_NVIDIA
-	tristate "nVidia Framebuffer Support"
-	depends on FB && PCI
-	select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BITREVERSE
-	select VGASTATE
-	help
-	  This driver supports graphics boards with the nVidia chips, TNT
-	  and newer. For very old chipsets, such as the RIVA128, then use
-	  the rivafb.
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called nvidiafb.
-
-config FB_NVIDIA_I2C
-       bool "Enable DDC Support"
-       depends on FB_NVIDIA
-       select FB_DDC
-       help
-	  This enables I2C support for nVidia Chipsets.  This is used
-	  only for getting EDID information from the attached display
-	  allowing for robust video mode handling and switching.
-
-	  Because fbdev-2.6 requires that drivers must be able to
-	  independently validate video mode parameters, you should say Y
-	  here.
-
-config FB_NVIDIA_DEBUG
-	bool "Lots of debug output"
-	depends on FB_NVIDIA
-	default n
-	help
-	  Say Y here if you want the nVidia driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_NVIDIA_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_NVIDIA
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_RIVA
-	tristate "nVidia Riva support"
-	depends on FB && PCI
-	select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BITREVERSE
-	select VGASTATE
-	help
-	  This driver supports graphics boards with the nVidia Riva/Geforce
-	  chips.
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rivafb.
-
-config FB_RIVA_I2C
-       bool "Enable DDC Support"
-       depends on FB_RIVA
-       select FB_DDC
-       help
-	  This enables I2C support for nVidia Chipsets.  This is used
-	  only for getting EDID information from the attached display
-	  allowing for robust video mode handling and switching.
-
-	  Because fbdev-2.6 requires that drivers must be able to
-	  independently validate video mode parameters, you should say Y
-	  here.
-
-config FB_RIVA_DEBUG
-	bool "Lots of debug output"
-	depends on FB_RIVA
-	default n
-	help
-	  Say Y here if you want the Riva driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_RIVA_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_RIVA
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_I740
-	tristate "Intel740 support"
-	depends on FB && PCI
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	select FB_DDC
-	help
-	  This driver supports graphics cards based on Intel740 chip.
-
-config FB_I810
-	tristate "Intel 810/815 support"
-	depends on FB && PCI && X86_32 && AGP_INTEL
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	help
-	  This driver supports the on-board graphics built in to the Intel 810 
-          and 815 chipsets.  Say Y if you have and plan to use such a board.
-
-          To compile this driver as a module, choose M here: the
-	  module will be called i810fb.
-
-          For more information, please read 
-	  <file:Documentation/fb/intel810.txt>
-
-config FB_I810_GTF
-	bool "use VESA Generalized Timing Formula"
-	depends on FB_I810
-	help
-	  If you say Y, then the VESA standard, Generalized Timing Formula 
-          or GTF, will be used to calculate the required video timing values
-	  per video mode.  Since the GTF allows nondiscrete timings 
-          (nondiscrete being a range of values as opposed to discrete being a
-          set of values), you'll be able to use any combination of horizontal 
-	  and vertical resolutions, and vertical refresh rates without having
-	  to specify your own timing parameters.  This is especially useful
-	  to maximize the performance of an aging display, or if you just 
-          have a display with nonstandard dimensions. A VESA compliant 
-	  monitor is recommended, but can still work with non-compliant ones.
-	  If you need or want this, then select this option. The timings may 
-	  not be compliant with Intel's recommended values. Use at your own 
-	  risk.
-
-          If you say N, the driver will revert to discrete video timings 
-	  using a set recommended by Intel in their documentation.
-  
-          If unsure, say N.
-
-config FB_I810_I2C
-	bool "Enable DDC Support"
-	depends on FB_I810 && FB_I810_GTF
-	select FB_DDC
-	help
-
-config FB_LE80578
-	tristate "Intel LE80578 (Vermilion) support"
-	depends on FB && PCI && X86
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This driver supports the LE80578 (Vermilion Range) chipset
-
-config FB_CARILLO_RANCH
-	tristate "Intel Carillo Ranch support"
-	depends on FB_LE80578 && FB && PCI && X86
-	help
-	  This driver supports the LE80578 (Carillo Ranch) board
-
-config FB_INTEL
-	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
-	depends on FB && PCI && X86 && AGP_INTEL && EXPERT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
-	depends on !DRM_I915
-	help
-	  This driver supports the on-board graphics built in to the Intel
-          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
-          Say Y if you have and plan to use such a board.
-
-	  To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called intelfb.
-
-	  For more information, please read <file:Documentation/fb/intelfb.txt>
-
-config FB_INTEL_DEBUG
-	bool "Intel driver Debug Messages"
-	depends on FB_INTEL
-	---help---
-	  Say Y here if you want the Intel driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_INTEL_I2C
-	bool "DDC/I2C for Intel framebuffer support"
-	depends on FB_INTEL
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
-
-config FB_MATROX
-	tristate "Matrox acceleration"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_MACMODES if PPC_PMAC
-	---help---
-	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
-	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
-	  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
-	  Matrox G400, G450 or G550 card in your box.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called matroxfb.
-
-	  You can pass several parameters to the driver at boot time or at
-	  module load time. The parameters look like "video=matroxfb:XXX", and
-	  are described in <file:Documentation/fb/matroxfb.txt>.
-
-config FB_MATROX_MILLENIUM
-	bool "Millennium I/II support"
-	depends on FB_MATROX
-	help
-	  Say Y here if you have a Matrox Millennium or Matrox Millennium II
-	  video card. If you select "Advanced lowlevel driver options" below,
-	  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
-	  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
-	  also use font widths different from 8.
-
-config FB_MATROX_MYSTIQUE
-	bool "Mystique support"
-	depends on FB_MATROX
-	help
-	  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
-	  video card. If you select "Advanced lowlevel driver options" below,
-	  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
-	  packed pixel and 32 bpp packed pixel. You can also use font widths
-	  different from 8.
-
-config FB_MATROX_G
-	bool "G100/G200/G400/G450/G550 support"
-	depends on FB_MATROX
-	---help---
-	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
-	  video card. If you select "Advanced lowlevel driver options", you
-	  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
-	  pixel and 32 bpp packed pixel. You can also use font widths
-	  different from 8.
-
-	  If you need support for G400 secondary head, you must say Y to
-	  "Matrox I2C support" and "G400 second head support" right below.
-	  G450/G550 secondary head and digital output are supported without
-	  additional modules.
-
-	  The driver starts in monitor mode. You must use the matroxset tool 
-	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
-	  swap primary and secondary head outputs, or to change output mode.  
-	  Secondary head driver always start in 640x480 resolution and you 
-	  must use fbset to change it.
-
-	  Do not forget that second head supports only 16 and 32 bpp
-	  packed pixels, so it is a good idea to compile them into the kernel
-	  too. You can use only some font widths, as the driver uses generic
-	  painting procedures (the secondary head does not use acceleration
-	  engine).
-
-	  G450/G550 hardware can display TV picture only from secondary CRTC,
-	  and it performs no scaling, so picture must have 525 or 625 lines.
-
-config FB_MATROX_I2C
-	tristate "Matrox I2C support"
-	depends on FB_MATROX
-	select FB_DDC
-	---help---
-	  This drivers creates I2C buses which are needed for accessing the
-	  DDC (I2C) bus present on all Matroxes, an I2C bus which
-	  interconnects Matrox optional devices, like MGA-TVO on G200 and
-	  G400, and the secondary head DDC bus, present on G400 only.
-
-	  You can say Y or M here if you want to experiment with monitor
-	  detection code. You must say Y or M here if you want to use either
-	  second head of G400 or MGA-TVO on G200 or G400.
-
-	  If you compile it as module, it will create a module named
-	  i2c-matroxfb.
-
-config FB_MATROX_MAVEN
-	tristate "G400 second head support"
-	depends on FB_MATROX_G && FB_MATROX_I2C
-	---help---
-	  WARNING !!! This support does not work with G450 !!!
-
-	  Say Y or M here if you want to use a secondary head (meaning two
-	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
-	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
-	  secondary head output is blanked while you are in X. With XFree
-	  3.9.17 preview you can use both heads if you use SVGA over fbdev or
-	  the fbdev driver on first head and the fbdev driver on second head.
-
-	  If you compile it as module, two modules are created,
-	  matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
-	  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
-	  also load i2c-matroxfb to get it to run.
-
-	  The driver starts in monitor mode and you must use the matroxset
-	  tool (available at
-	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
-	  PAL or NTSC or to swap primary and secondary head outputs.
-	  Secondary head driver also always start in 640x480 resolution, you
-	  must use fbset to change it.
-
-	  Also do not forget that second head supports only 16 and 32 bpp
-	  packed pixels, so it is a good idea to compile them into the kernel
-	  too.  You can use only some font widths, as the driver uses generic
-	  painting procedures (the secondary head does not use acceleration
-	  engine).
-
-config FB_RADEON
-	tristate "ATI Radeon display support"
-	depends on FB && PCI
-	select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES if PPC_OF
-	help
-	  Choose this option if you want to use an ATI Radeon graphics card as
-	  a framebuffer device.  There are both PCI and AGP versions.  You
-	  don't need to choose this to run the Radeon in plain VGA mode.
-
-	  There is a product page at
-	  http://products.amd.com/en-us/GraphicCardResult.aspx
-
-config FB_RADEON_I2C
-	bool "DDC/I2C for ATI Radeon support"
-	depends on FB_RADEON
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your Radeon board. 
-
-config FB_RADEON_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_RADEON
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_RADEON_DEBUG
-	bool "Lots of debug output from Radeon driver"
-	depends on FB_RADEON
-	default n
-	help
-	  Say Y here if you want the Radeon driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_ATY128
-	tristate "ATI Rage128 display support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
-	select FB_MACMODES if PPC_PMAC
-	help
-	  This driver supports graphics boards with the ATI Rage128 chips.
-	  Say Y if you have such a graphics board and read
-	  <file:Documentation/fb/aty128fb.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aty128fb.
-
-config FB_ATY128_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_ATY128
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_ATY
-	tristate "ATI Mach64 display support" if PCI || ATARI
-	depends on FB && !SPARC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
-	select FB_MACMODES if PPC
-	help
-	  This driver supports graphics boards with the ATI Mach64 chips.
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called atyfb.
-
-config FB_ATY_CT
-	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
-	depends on PCI && FB_ATY
-	default y if SPARC64 && PCI
-	help
-	  Say Y here to support use of ATI's 64-bit Rage boards (or other
-	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
-	  framebuffer device.  The ATI product support page for these boards
-	  is at <http://support.ati.com/products/pc/mach64/mach64.html>.
-
-config FB_ATY_GENERIC_LCD
-	bool "Mach64 generic LCD support"
-	depends on FB_ATY_CT
-	help
-	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
-	  Rage XC, or Rage XL chipset.
-
-config FB_ATY_GX
-	bool "Mach64 GX support" if PCI
-	depends on FB_ATY
-	default y if ATARI
-	help
-	  Say Y here to support use of the ATI Mach64 Graphics Expression
-	  board (or other boards based on the Mach64 GX chipset) as a
-	  framebuffer device.  The ATI product support page for these boards
-	  is at
-	  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
-
-config FB_ATY_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_ATY
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_S3
-	tristate "S3 Trio/Virge support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_SVGALIB
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	---help---
-	  Driver for graphics boards with S3 Trio / S3 Virge chip.
-
-config FB_S3_DDC
-	bool "DDC for S3 support"
-	depends on FB_S3
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC support for your S3 graphics card.
-
-config FB_SAVAGE
-	tristate "S3 Savage support"
-	depends on FB && PCI
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	help
-	  This driver supports notebooks and computers with S3 Savage PCI/AGP
-	  chips.
-
-	  Say Y if you have such a graphics card.
-
-	  To compile this driver as a module, choose M here; the module
-	  will be called savagefb.
-
-config FB_SAVAGE_I2C
-       bool "Enable DDC2 Support"
-       depends on FB_SAVAGE
-       select FB_DDC
-       help
-	  This enables I2C support for S3 Savage Chipsets.  This is used
-	  only for getting EDID information from the attached display
-	  allowing for robust video mode handling and switching.
-
-	  Because fbdev-2.6 requires that drivers must be able to
-	  independently validate video mode parameters, you should say Y
-	  here.
-
-config FB_SAVAGE_ACCEL
-       bool "Enable Console Acceleration"
-       depends on FB_SAVAGE
-       default n
-       help
-          This option will compile in console acceleration support. If
-          the resulting framebuffer console has bothersome glitches, then
-          choose N here.
-
-config FB_SIS
-	tristate "SiS/XGI display support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT if FB_SIS = y
-	help
-	  This is the frame buffer device driver for the SiS 300, 315, 330
-	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
-	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
-
-	  To compile this driver as a module, choose M here; the module
-	  will be called sisfb.
-
-config FB_SIS_300
-	bool "SiS 300 series support"
-	depends on FB_SIS
-	help
-	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.
-
-config FB_SIS_315
-	bool "SiS 315/330/340 series and XGI support"
-	depends on FB_SIS
-	help
-	  Say Y here to support use of the SiS 315, 330 and 340 series
-	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
-	  as XGI V3XT, V5, V8 and Z7.
-
-config FB_VIA
-       tristate "VIA UniChrome (Pro) and Chrome9 display support"
-       depends on FB && PCI && X86
-       select FB_CFB_FILLRECT
-       select FB_CFB_COPYAREA
-       select FB_CFB_IMAGEBLIT
-       select I2C_ALGOBIT
-       select I2C
-       select GPIOLIB
-       help
-	  This is the frame buffer device driver for Graphics chips of VIA
-	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
-	  CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
- 	  /P4M900,VX800)
-	  Say Y if you have a VIA UniChrome graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called viafb.
-
-if FB_VIA
-
-config FB_VIA_DIRECT_PROCFS
-	bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
-	depends on FB_VIA
-	default n
-	help
-	  Allow direct hardware access to some output registers via procfs.
-	  This is dangerous but may provide the only chance to get the
-	  correct output device configuration.
-	  Its use is strongly discouraged.
-
-config FB_VIA_X_COMPATIBILITY
-	bool "X server compatibility"
-	depends on FB_VIA
-	default n
-	help
-	  This option reduces the functionality (power saving, ...) of the
-	  framebuffer to avoid negative impact on the OpenChrome X server.
-	  If you use any X server other than fbdev you should enable this
-	  otherwise it should be safe to disable it and allow using all
-	  features.
-
-endif
-
-config FB_NEOMAGIC
-	tristate "NeoMagic display support"
-	depends on FB && PCI
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	help
-	  This driver supports notebooks with NeoMagic PCI chips.
-	  Say Y if you have such a graphics card. 
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called neofb.
-
-config FB_KYRO
-	tristate "IMG Kyro support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
-	  graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called kyrofb.
-
-config FB_3DFX
-	tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
-	depends on FB && PCI
-	select FB_CFB_IMAGEBLIT
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_MODE_HELPERS
-	help
-	  This driver supports graphics boards with the 3Dfx Banshee,
-	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
-	  such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tdfxfb.
-
-config FB_3DFX_ACCEL
-	bool "3Dfx Acceleration functions"
-	depends on FB_3DFX
-	---help---
-	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
-	device driver with acceleration functions.
-
-config FB_3DFX_I2C
-	bool "Enable DDC/I2C support"
-	depends on FB_3DFX
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
-
-config FB_VOODOO1
-	tristate "3Dfx Voodoo Graphics (sst1) support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
-	  Voodoo2 (cvg) based graphics card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sstfb.
-
-	  WARNING: Do not use any application that uses the 3D engine
-	  (namely glide) while using this driver.
-	  Please read the <file:Documentation/fb/sstfb.txt> for supported
-	  options and other important info  support.
-
-config FB_VT8623
-	tristate "VIA VT8623 support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_SVGALIB
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	---help---
-	  Driver for CastleRock integrated graphics core in the
-	  VIA VT8623 [Apollo CLE266] chipset.
-
-config FB_TRIDENT
-	tristate "Trident/CyberXXX/CyberBlade support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  This is the frame buffer device driver for Trident PCI/AGP chipsets.
-	  Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
-	  and Blade XP.
-	  There are also integrated versions of these chips called CyberXXXX,
-	  CyberImage or CyberBlade. These chips are mostly found in laptops
-	  but also on some motherboards including early VIA EPIA motherboards.
-	  For more information, read <file:Documentation/fb/tridentfb.txt>
-
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tridentfb.
-
-config FB_ARK
-	tristate "ARK 2000PV support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_SVGALIB
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	---help---
-	  Driver for PCI graphics boards with ARK 2000PV chip
-	  and ICS 5342 RAMDAC.
-
-config FB_PM3
-	tristate "Permedia3 support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the 3DLabs Permedia3
-	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
-	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
-	  and maybe other boards.
-
-config FB_CARMINE
-	tristate "Fujitsu carmine frame buffer support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Fujitsu Carmine chip.
-	  The driver provides two independent frame buffer devices.
-
-choice
-	depends on FB_CARMINE
-	prompt "DRAM timing"
-	default FB_CARMINE_DRAM_EVAL
-
-config FB_CARMINE_DRAM_EVAL
-	bool "Eval board timings"
-	help
-	  Use timings which work on the eval card.
-
-config CARMINE_DRAM_CUSTOM
-	bool "Custom board timings"
-	help
-	  Use custom board timings.
-endchoice
-
-config FB_AU1100
-	bool "Au1100 LCD Driver"
-	depends on (FB = y) && MIPS_ALCHEMY
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer driver for the AMD Au1100 SOC.  It can drive
-	  various panels and CRTs by passing in kernel cmd line option
-	  au1100fb:panel=<name>.
-
-config FB_AU1200
-	bool "Au1200/Au1300 LCD Driver"
-	depends on (FB = y) && MIPS_ALCHEMY
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  This is the framebuffer driver for the Au1200/Au1300 SOCs.
-	  It can drive various panels and CRTs by passing in kernel cmd line
-	  option au1200fb:panel=<name>.
-
-config FB_VT8500
-	bool "VIA VT8500 framebuffer support"
-	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
-	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
-	select FB_SYS_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This is the framebuffer driver for VIA VT8500 integrated LCD
-	  controller.
-
-config FB_WM8505
-	bool "Wondermedia WM8xxx-series frame buffer support"
-	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
-	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
-	select FB_SYS_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This is the framebuffer driver for WonderMedia WM8xxx-series
-	  integrated LCD controller. This driver covers the WM8505, WM8650
-	  and WM8850 SoCs.
-
-config FB_WMT_GE_ROPS
-	bool "VT8500/WM8xxx accelerated raster ops support"
-	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
-	default n
-	help
-	  This adds support for accelerated raster operations on the
-	  VIA VT8500 and Wondermedia 85xx series SoCs.
-
-source "drivers/video/geode/Kconfig"
-
-config FB_HIT
-	tristate "HD64461 Frame Buffer support"
-	depends on FB && HD64461
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Hitachi HD64461 LCD
-	  frame buffer card.
-
-config FB_PMAG_AA
-	bool "PMAG-AA TURBOchannel framebuffer support"
-	depends on (FB = y) && TC
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
-	  used mainly in the MIPS-based DECstation series.
-
-config FB_PMAG_BA
-	tristate "PMAG-BA TURBOchannel framebuffer support"
-	depends on FB && TC
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
-	  used mainly in the MIPS-based DECstation series.
-
-config FB_PMAGB_B
-	tristate "PMAGB-B TURBOchannel framebuffer support"
-	depends on FB && TC
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
-	  in the MIPS-based DECstation series. The card is currently only
-	  supported in 1280x1024x8 mode.
-
-config FB_MAXINE
-	bool "Maxine (Personal DECstation) onboard framebuffer support"
-	depends on (FB = y) && MACH_DECSTATION
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the onboard framebuffer (1024x768x8) in the Personal
-	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,
-	  Codename "Maxine").
-
-config FB_G364
-	bool "G364 frame buffer support"
-	depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and
-	  Olivetti M700-10 systems.
-
-config FB_68328
-	bool "Motorola 68328 native frame buffer support"
-	depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y here if you want to support the built-in frame buffer of
-	  the Motorola 68328 CPU family.
-
-config FB_PXA168
-	tristate "PXA168/910 LCD framebuffer support"
-	depends on FB && (CPU_PXA168 || CPU_PXA910)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in LCD controller in the Marvell
-	  MMP processor.
-
-config FB_PXA
-	tristate "PXA LCD framebuffer support"
-	depends on FB && ARCH_PXA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in LCD controller in the Intel
-	  PXA2x0 processor.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called pxafb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_PXA_OVERLAY
-	bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
-	default n
-	depends on FB_PXA && (PXA27x || PXA3xx)
-
-config FB_PXA_SMARTPANEL
-	bool "PXA Smartpanel LCD support"
-	default n
-	depends on FB_PXA
-
-config FB_PXA_PARAMETERS
-	bool "PXA LCD command line parameters"
-	default n
-	depends on FB_PXA
-	---help---
-	  Enable the use of kernel command line or module parameters
-	  to configure the physical properties of the LCD panel when
-	  using the PXA LCD driver.
-
-	  This option allows you to override the panel parameters
-	  supplied by the platform in order to support multiple
-	  different models of flatpanel. If you will only be using a
-	  single model of flatpanel then you can safely leave this
-	  option disabled.
-
-	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
-
-config PXA3XX_GCU
-	tristate "PXA3xx 2D graphics accelerator driver"
-	depends on FB_PXA
-	help
-	  Kernelspace driver for the 2D graphics controller unit (GCU)
-	  found on PXA3xx processors. There is a counterpart driver in the
-	  DirectFB suite, see http://www.directfb.org/
-
-	  If you compile this as a module, it will be called pxa3xx_gcu.
-
-config FB_MBX
-	tristate "2700G LCD framebuffer support"
-	depends on FB && ARCH_PXA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
-	  Accelerator
-
-config FB_MBX_DEBUG
-       bool "Enable debugging info via debugfs"
-       depends on FB_MBX && DEBUG_FS
-       default n
-       ---help---
-         Enable this if you want debugging information using the debug
-         filesystem (debugfs)
-
-         If unsure, say N.
-
-config FB_FSL_DIU
-	tristate "Freescale DIU framebuffer support"
-	depends on FB && FSL_SOC
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select PPC_LIB_RHEAP
-	---help---
-	  Framebuffer driver for the Freescale SoC DIU
-
-config FB_W100
-	tristate "W100 frame buffer support"
-	depends on FB && ARCH_PXA
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
-	  It can also drive the w3220 chip found on iPAQ hx4700.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called w100fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_SH_MOBILE_LCDC
-	tristate "SuperH Mobile LCDC framebuffer support"
-	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	select FB_BACKLIGHT
-	select SH_MIPI_DSI if SH_LCD_MIPI_DSI
-	---help---
-	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
-
-config FB_SH_MOBILE_HDMI
-	tristate "SuperH Mobile HDMI controller support"
-	depends on FB_SH_MOBILE_LCDC
-	select FB_MODE_HELPERS
-	select SOUND
-	select SND
-	select SND_SOC
-	---help---
-	  Driver for the on-chip SH-Mobile HDMI controller.
-
-config FB_TMIO
-	tristate "Toshiba Mobile IO FrameBuffer support"
-	depends on FB && MFD_CORE
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the Toshiba Mobile IO integrated as found
-	  on the Sharp SL-6000 series
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called tmiofb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_TMIO_ACCELL
-	bool "tmiofb acceleration"
-	depends on FB_TMIO
-	default y
-
-config FB_S3C
-	tristate "Samsung S3C framebuffer support"
-	depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
-		ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in FB controller in the Samsung
-	  SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
-	  and the S3C64XX series such as the S3C6400 and S3C6410.
-
-	  These chips all have the same basic framebuffer design with the
-	  actual capabilities depending on the chip. For instance the S3C6400
-	  and S3C6410 support 4 hardware windows whereas the S3C24XX series
-	  currently only have two.
-
-	  Currently the support is only for the S3C6400 and S3C6410 SoCs.
-
-config FB_S3C_DEBUG_REGWRITE
-       bool "Debug register writes"
-       depends on FB_S3C
-       ---help---
-         Show all register writes via pr_debug()
-
-config FB_S3C2410
-	tristate "S3C2410 LCD framebuffer support"
-	depends on FB && ARCH_S3C24XX
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in LCD controller in the Samsung
-	  S3C2410 processor.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called s3c2410fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-config FB_S3C2410_DEBUG
-	bool "S3C2410 lcd debug messages"
-	depends on FB_S3C2410
-	help
-	  Turn on debugging messages. Note that you can set/unset at run time
-	  through sysfs
-
-config FB_NUC900
-        bool "NUC900 LCD framebuffer support"
-        depends on FB && ARCH_W90X900
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        ---help---
-          Frame buffer driver for the built-in LCD controller in the Nuvoton
-          NUC900 processor
-
-config GPM1040A0_320X240
-        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
-        depends on FB_NUC900
-
-config FB_SM501
-	tristate "Silicon Motion SM501 framebuffer support"
-	depends on FB && MFD_SM501
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the CRT and LCD controllers in the Silicon
-	  Motion SM501.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called sm501fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_SMSCUFX
-	tristate "SMSC UFX6000/7000 USB Framebuffer support"
-	depends on FB && USB
-	select FB_MODE_HELPERS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	---help---
-	  This is a kernel framebuffer driver for SMSC UFX USB devices.
-	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
-	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
-	  (USB 3.0) devices.
-	  To compile as a module, choose M here: the module name is smscufx.
-
-config FB_UDL
-	tristate "Displaylink USB Framebuffer support"
-	depends on FB && USB
-	select FB_MODE_HELPERS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	---help---
-	  This is a kernel framebuffer driver for DisplayLink USB devices.
-	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
-	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
-	  To compile as a module, choose M here: the module name is udlfb.
-
-config FB_IBM_GXT4500
-	tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
-	depends on FB && PPC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here to enable support for the IBM GXT4000P/6000P and
-	  GXT4500P/6500P display adaptor based on Raster Engine RC1000,
-	  found on some IBM System P (pSeries) machines. This driver
-	  doesn't use Geometry Engine GT1000.
-
-config FB_PS3
-	tristate "PS3 GPU framebuffer driver"
-	depends on FB && PS3_PS3AV
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
-	---help---
-	  Include support for the virtual frame buffer in the PS3 platform.
-
-config FB_PS3_DEFAULT_SIZE_M
-	int "PS3 default frame buffer size (in MiB)"
-	depends on FB_PS3
-	default 9
-	---help---
-	  This is the default size (in MiB) of the virtual frame buffer in
-	  the PS3.
-	  The default value can be overridden on the kernel command line
-	  using the "ps3fb" option (e.g. "ps3fb=9M");
-
-config FB_XILINX
-	tristate "Xilinx frame buffer support"
-	depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Include support for the Xilinx ML300/ML403 reference design
-	  framebuffer. ML300 carries a 640*480 LCD display on the board,
-	  ML403 uses a standard DB15 VGA connector.
-
-config FB_GOLDFISH
-	tristate "Goldfish Framebuffer"
-	depends on FB && HAS_DMA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Framebuffer driver for Goldfish Virtual Platform
-
-config FB_COBALT
-	tristate "Cobalt server LCD frame buffer support"
-	depends on FB && (MIPS_COBALT || MIPS_SEAD3)
-
-config FB_SH7760
-	bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
-	depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
-		|| CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Support for the SH7760/SH7763/SH7720/SH7721 integrated
-	  (D)STN/TFT LCD Controller.
-	  Supports display resolutions up to 1024x1024 pixel, grayscale and
-	  color operation, with depths ranging from 1 bpp to 8 bpp monochrome
-	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
-	  panels <= 320 pixel horizontal resolution.
-
-config FB_DA8XX
-	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
-	depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_CFB_REV_PIXELS_IN_BYTE
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	---help---
-	  This is the frame buffer device driver for the TI LCD controller
-	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
-	  If unsure, say N.
-
-config FB_VIRTUAL
-	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	---help---
-	  This is a `virtual' frame buffer device. It operates on a chunk of
-	  unswappable kernel memory instead of on the memory of a graphics
-	  board. This means you cannot see any output sent to this frame
-	  buffer device, while it does consume precious memory. The main use
-	  of this frame buffer device is testing and debugging the frame
-	  buffer subsystem. Do NOT enable it for normal systems! To protect
-	  the innocent, it has to be enabled explicitly at boot time using the
-	  kernel option `video=vfb:'.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vfb. In order to load it, you must use
-	  the vfb_enable=1 option.
-
-	  If unsure, say N.
-
-config XEN_FBDEV_FRONTEND
-	tristate "Xen virtual frame buffer support"
-	depends on FB && XEN
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
-	select XEN_XENBUS_FRONTEND
-	default y
-	help
-	  This driver implements the front-end of the Xen virtual
-	  frame buffer driver.  It communicates with a back-end
-	  in another domain.
-
-config FB_METRONOME
-	tristate "E-Ink Metronome/8track controller support"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	help
-	  This driver implements support for the E-Ink Metronome
-	  controller. The pre-release name for this device was 8track
-	  and could also have been called by some vendors as PVI-nnnn.
-
-config FB_MB862XX
-	tristate "Fujitsu MB862xx GDC support"
-	depends on FB
-	depends on PCI || (OF && PPC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
-
-choice
-	prompt "GDC variant"
-	depends on FB_MB862XX
-
-config FB_MB862XX_PCI_GDC
-	bool "Carmine/Coral-P(A) GDC"
-	depends on PCI
-	---help---
-	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
-	  PCI graphics controller devices.
-
-config FB_MB862XX_LIME
-	bool "Lime GDC"
-	depends on OF && PPC
-	select FB_FOREIGN_ENDIAN
-	select FB_LITTLE_ENDIAN
-	---help---
-	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
-
-endchoice
-
-config FB_MB862XX_I2C
-	bool "Support I2C bus on MB862XX GDC"
-	depends on FB_MB862XX && I2C
-	default y
-	help
-	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
-	  driver to support accessing I2C devices on controller's I2C bus.
-	  These are usually some video decoder chips.
-
-config FB_EP93XX
-	tristate "EP93XX frame buffer support"
-	depends on FB && ARCH_EP93XX
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Framebuffer driver for the Cirrus Logic EP93XX series of processors.
-	  This driver is also available as a module. The module will be called
-	  ep93xx-fb.
-
-config FB_PRE_INIT_FB
-	bool "Don't reinitialize, use bootloader's GDC/Display configuration"
-	depends on FB && FB_MB862XX_LIME
-	---help---
-	  Select this option if display contents should be inherited as set by
-	  the bootloader.
-
-config FB_MSM
-	tristate "MSM Framebuffer support"
-	depends on FB && ARCH_MSM
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-
-config FB_MX3
-	tristate "MX3 Framebuffer support"
-	depends on FB && MX3_IPU
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	default y
-	help
-	  This is a framebuffer device for the i.MX31 LCD Controller. So
-	  far only synchronous displays are supported. If you plan to use
-	  an LCD display with your i.MX31 system, say Y here.
-
-config FB_BROADSHEET
-	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	help
-	  This driver implements support for the E-Ink Broadsheet
-	  controller. The release name for this device was Epson S1D13521
-	  and could also have been called by other names when coupled with
-	  a bridge adapter.
-
-config FB_AUO_K190X
-	tristate "AUO-K190X EPD controller support"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	help
-	  Provides support for epaper controllers from the K190X series
-	  of AUO. These controllers can be used to drive epaper displays
-	  from Sipix.
-
-	  This option enables the common support, shared by the individual
-	  controller drivers. You will also have to enable the driver
-	  for the controller type used in your device.
-
-config FB_AUO_K1900
-	tristate "AUO-K1900 EPD controller support"
-	depends on FB && FB_AUO_K190X
-	help
-	  This driver implements support for the AUO K1900 epd-controller.
-	  This controller can drive Sipix epaper displays but can only do
-	  serial updates, reducing the number of possible frames per second.
-
-config FB_AUO_K1901
-	tristate "AUO-K1901 EPD controller support"
-	depends on FB && FB_AUO_K190X
-	help
-	  This driver implements support for the AUO K1901 epd-controller.
-	  This controller can drive Sipix epaper displays and supports
-	  concurrent updates, making higher frames per second possible.
-
-config FB_JZ4740
-	tristate "JZ4740 LCD framebuffer support"
-	depends on FB && MACH_JZ4740
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	help
-	  Framebuffer support for the JZ4740 SoC.
-
-config FB_MXS
-	tristate "MXS LCD framebuffer support"
-	depends on FB && ARCH_MXS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  Framebuffer support for the MXS SoC.
-
-config FB_PUV3_UNIGFX
-	tristate "PKUnity v3 Unigfx framebuffer support"
-	depends on FB && UNICORE32 && ARCH_PUV3
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  Choose this option if you want to use the Unigfx device as a
-	  framebuffer device. Without the support of PCI & AGP.
-
-config FB_HYPERV
-	tristate "Microsoft Hyper-V Synthetic Video support"
-	depends on FB && HYPERV
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
-
-config FB_SIMPLE
-	bool "Simple framebuffer support"
-	depends on (FB = y)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y if you want support for a simple frame-buffer.
-
-	  This driver assumes that the display hardware has been initialized
-	  before the kernel boots, and the kernel will simply render to the
-	  pre-allocated frame buffer surface.
-
-	  Configuration re: surface address, size, and format must be provided
-	  through device tree, or plain old platform data.
-
-source "drivers/video/omap/Kconfig"
-source "drivers/video/omap2/Kconfig"
-source "drivers/video/exynos/Kconfig"
-source "drivers/video/mmp/Kconfig"
-source "drivers/video/backlight/Kconfig"
-
 if VT
 	source "drivers/video/console/Kconfig"
 endif
 
 if FB || SGI_NEWPORT_CONSOLE
 	source "drivers/video/logo/Kconfig"
-endif
 
-config FB_SH_MOBILE_MERAM
-	tristate "SuperH Mobile MERAM read ahead support"
-	depends on (SUPERH || ARCH_SHMOBILE)
-	select GENERIC_ALLOCATOR
-	---help---
-	  Enable MERAM support for the SuperH controller.
-
-	  This will allow for caching of the framebuffer to provide more
-	  reliable access under heavy main memory bus traffic situations.
-	  Up to 4 memory channels can be configured, allowing 4 RGB or
-	  2 YCbCr framebuffers to be configured.
+endif
 
-config FB_SSD1307
-	tristate "Solomon SSD1307 framebuffer support"
-	depends on FB && I2C
-	depends on OF
-	depends on GPIOLIB
-	select FB_SYS_FOPS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_DEFERRED_IO
-	select PWM
-	help
-	  This driver implements support for the Solomon SSD1307
-	  OLED controller over I2C.
 
 endmenu
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 1be26fe10592..9ad3c17d6456 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -1,175 +1,11 @@
-# Makefile for the Linux video drivers.
-# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
-# Rewritten to use lists instead of if-statements.
-
-# Each configuration option enables a list of files.
-
 obj-$(CONFIG_VGASTATE)            += vgastate.o
 obj-$(CONFIG_HDMI)                += hdmi.o
-obj-y                             += fb_notify.o
-obj-$(CONFIG_FB)                  += fb.o
-fb-y                              := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
-                                     modedb.o fbcvt.o
-fb-objs                           := $(fb-y)
 
 obj-$(CONFIG_VT)		  += console/
 obj-$(CONFIG_LOGO)		  += logo/
 obj-y				  += backlight/
 
-obj-$(CONFIG_EXYNOS_VIDEO)     += exynos/
-
-obj-$(CONFIG_FB_CFB_FILLRECT)  += cfbfillrect.o
-obj-$(CONFIG_FB_CFB_COPYAREA)  += cfbcopyarea.o
-obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
-obj-$(CONFIG_FB_SYS_FILLRECT)  += sysfillrect.o
-obj-$(CONFIG_FB_SYS_COPYAREA)  += syscopyarea.o
-obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
-obj-$(CONFIG_FB_SYS_FOPS)      += fb_sys_fops.o
-obj-$(CONFIG_FB_SVGALIB)       += svgalib.o
-obj-$(CONFIG_FB_MACMODES)      += macmodes.o
-obj-$(CONFIG_FB_DDC)           += fb_ddc.o
-obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
-obj-$(CONFIG_FB_WMT_GE_ROPS)   += wmt_ge_rops.o
-
-# Hardware specific drivers go first
-obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
-obj-$(CONFIG_FB_ARC)              += arcfb.o
-obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
-obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
-obj-$(CONFIG_FB_GRVGA)            += grvga.o
-obj-$(CONFIG_FB_PM2)              += pm2fb.o
-obj-$(CONFIG_FB_PM3)		  += pm3fb.o
-
-obj-$(CONFIG_FB_I740)		  += i740fb.o
-obj-$(CONFIG_FB_MATROX)		  += matrox/
-obj-$(CONFIG_FB_RIVA)		  += riva/
-obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
-obj-$(CONFIG_FB_ATY)		  += aty/ macmodes.o
-obj-$(CONFIG_FB_ATY128)		  += aty/ macmodes.o
-obj-$(CONFIG_FB_RADEON)		  += aty/
-obj-$(CONFIG_FB_SIS)		  += sis/
-obj-$(CONFIG_FB_VIA)		  += via/
-obj-$(CONFIG_FB_KYRO)             += kyro/
-obj-$(CONFIG_FB_SAVAGE)		  += savage/
-obj-$(CONFIG_FB_GEODE)		  += geode/
-obj-$(CONFIG_FB_MBX)		  += mbx/
-obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o
-obj-$(CONFIG_FB_3DFX)             += tdfxfb.o
-obj-$(CONFIG_FB_CONTROL)          += controlfb.o
-obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
-obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
-obj-$(CONFIG_FB_CT65550)          += chipsfb.o
-obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
-obj-$(CONFIG_FB_FM2)              += fm2fb.o
-obj-$(CONFIG_FB_VT8623)           += vt8623fb.o
-obj-$(CONFIG_FB_TRIDENT)          += tridentfb.o
-obj-$(CONFIG_FB_LE80578)          += vermilion/
-obj-$(CONFIG_FB_S3)               += s3fb.o
-obj-$(CONFIG_FB_ARK)              += arkfb.o
-obj-$(CONFIG_FB_STI)              += stifb.o
-obj-$(CONFIG_FB_FFB)              += ffb.o sbuslib.o
-obj-$(CONFIG_FB_CG6)              += cg6.o sbuslib.o
-obj-$(CONFIG_FB_CG3)              += cg3.o sbuslib.o
-obj-$(CONFIG_FB_BW2)              += bw2.o sbuslib.o
-obj-$(CONFIG_FB_CG14)             += cg14.o sbuslib.o
-obj-$(CONFIG_FB_P9100)            += p9100.o sbuslib.o
-obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
-obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
-obj-$(CONFIG_FB_ACORN)            += acornfb.o
-obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
-                                     atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
-obj-$(CONFIG_FB_MAC)              += macfb.o
-obj-$(CONFIG_FB_HECUBA)           += hecubafb.o
-obj-$(CONFIG_FB_N411)             += n411.o
-obj-$(CONFIG_FB_HGA)              += hgafb.o
-obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
-obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
-obj-$(CONFIG_FB_XVR1000)          += sunxvr1000.o
-obj-$(CONFIG_FB_IGA)              += igafb.o
-obj-$(CONFIG_FB_APOLLO)           += dnfb.o
-obj-$(CONFIG_FB_Q40)              += q40fb.o
-obj-$(CONFIG_FB_TGA)              += tgafb.o
-obj-$(CONFIG_FB_HP300)            += hpfb.o
-obj-$(CONFIG_FB_G364)             += g364fb.o
-obj-$(CONFIG_FB_EP93XX)		  += ep93xx-fb.o
-obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
-obj-$(CONFIG_FB_HIT)              += hitfb.o
-obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
-obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
-obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
-obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
-obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
-obj-$(CONFIG_FB_68328)            += 68328fb.o
-obj-$(CONFIG_FB_GBE)              += gbefb.o
-obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
-obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
-obj-$(CONFIG_FB_PXA)		  += pxafb.o
-obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
-obj-$(CONFIG_PXA3XX_GCU)	  += pxa3xx-gcu.o
-obj-$(CONFIG_MMP_DISP)           += mmp/
-obj-$(CONFIG_FB_W100)		  += w100fb.o
-obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
-obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
-obj-$(CONFIG_FB_AU1200)		  += au1200fb.o
-obj-$(CONFIG_FB_VT8500)		  += vt8500lcdfb.o
-obj-$(CONFIG_FB_WM8505)		  += wm8505fb.o
-obj-$(CONFIG_FB_PMAG_AA)	  += pmag-aa-fb.o
-obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
-obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
-obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
-obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
-obj-$(CONFIG_FB_BROADSHEET)       += broadsheetfb.o
-obj-$(CONFIG_FB_AUO_K190X)	  += auo_k190x.o
-obj-$(CONFIG_FB_AUO_K1900)	  += auo_k1900fb.o
-obj-$(CONFIG_FB_AUO_K1901)	  += auo_k1901fb.o
-obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
-obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
-obj-$(CONFIG_FB_IMX)              += imxfb.o
-obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
-obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
-obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
-obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
-obj-$(CONFIG_FB_PS3)		  += ps3fb.o
-obj-$(CONFIG_FB_SM501)            += sm501fb.o
-obj-$(CONFIG_FB_UDL)		  += udlfb.o
-obj-$(CONFIG_FB_SMSCUFX)	  += smscufx.o
-obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
-obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
-obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
-obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
-obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_OMAP)             += omap/
-obj-y                             += omap2/
-obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
-obj-$(CONFIG_FB_CARMINE)          += carminefb.o
-obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
-obj-$(CONFIG_FB_MSM)              += msm/
-obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
-obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
-obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
-obj-$(CONFIG_FB_HYPERV)		  += hyperv_fb.o
-obj-$(CONFIG_FB_OPENCORES)	  += ocfb.o
-
-# Platform or fallback drivers go here
-obj-$(CONFIG_FB_UVESA)            += uvesafb.o
-obj-$(CONFIG_FB_VESA)             += vesafb.o
-obj-$(CONFIG_FB_EFI)              += efifb.o
-obj-$(CONFIG_FB_VGA16)            += vga16fb.o
-obj-$(CONFIG_FB_OF)               += offb.o
-obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
-obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
-obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
-obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
-obj-$(CONFIG_FB_MX3)		  += mx3fb.o
-obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
-obj-$(CONFIG_FB_MXS)		  += mxsfb.o
-obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
-obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
-
-# the test framebuffer is last
-obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
+obj-y				  += fbdev/
 
 obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.o
 ifeq ($(CONFIG_OF),y)
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index 5f65ca3d8564..026fd1215933 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -46,7 +46,7 @@
 
 #include <asm/io.h>
 
-#include "../sticore.h"
+#include "../fbdev/sticore.h"
 
 /* switching to graphics mode */
 #define BLANK 0
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index cecd3de01c24..7da1ad03acb5 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -28,7 +28,7 @@
 #include <asm/cacheflush.h>
 #include <asm/grfioctl.h>
 
-#include "../sticore.h"
+#include "../fbdev/sticore.h"
 
 #define STI_DRIVERVERSION "Version 0.9b"
 
diff --git a/drivers/video/68328fb.c b/drivers/video/fbdev/68328fb.c
index 552258c8f99d..552258c8f99d 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/fbdev/68328fb.c
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
new file mode 100644
index 000000000000..e1f47272fdea
--- /dev/null
+++ b/drivers/video/fbdev/Kconfig
@@ -0,0 +1,2474 @@
+#
+# fbdev configuration
+#
+
+menuconfig FB
+	tristate "Support for frame buffer devices"
+	---help---
+	  The frame buffer device provides an abstraction for the graphics
+	  hardware. It represents the frame buffer of some video hardware and
+	  allows application software to access the graphics hardware through
+	  a well-defined interface, so the software doesn't need to know
+	  anything about the low-level (hardware register) stuff.
+
+	  Frame buffer devices work identically across the different
+	  architectures supported by Linux and make the implementation of
+	  application programs easier and more portable; at this point, an X
+	  server exists which uses the frame buffer device exclusively.
+	  On several non-X86 architectures, the frame buffer device is the
+	  only way to use the graphics hardware.
+
+	  The device is accessed through special device nodes, usually located
+	  in the /dev directory, i.e. /dev/fb*.
+
+	  You need an utility program called fbset to make full use of frame
+	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+	  and the Framebuffer-HOWTO at
+	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
+	  information.
+
+	  Say Y here and to the driver for your graphics board below if you
+	  are compiling a kernel for a non-x86 architecture.
+
+	  If you are compiling for the x86 architecture, you can say Y if you
+	  want to play with it, but it is not essential. Please note that
+	  running graphical applications that directly touch the hardware
+	  (e.g. an accelerated X server) and that are not frame buffer
+	  device-aware may cause unexpected results. If unsure, say N.
+
+config FIRMWARE_EDID
+       bool "Enable firmware EDID"
+       depends on FB
+       default n
+       ---help---
+         This enables access to the EDID transferred from the firmware.
+	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+	 transfers do not work for your driver and if you are using
+	 nvidiafb, i810fb or savagefb.
+
+	 In general, choosing Y for this option is safe.  If you
+	 experience extremely long delays while booting before you get
+	 something on your display, try setting this to N.  Matrox cards in
+	 combination with certain motherboards and monitors are known to
+	 suffer from this problem.
+
+config FB_DDC
+       tristate
+       depends on FB
+       select I2C_ALGOBIT
+       select I2C
+       default n
+
+config FB_BOOT_VESA_SUPPORT
+	bool
+	depends on FB
+	default n
+	---help---
+	  If true, at least one selected framebuffer driver can take advantage
+	  of VESA video modes set at an early boot stage via the vga= parameter.
+
+config FB_CFB_FILLRECT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the cfb_fillrect function for generic software rectangle
+	  filling. This is used by drivers that don't provide their own
+	  (accelerated) version.
+
+config FB_CFB_COPYAREA
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the cfb_copyarea function for generic software area copying.
+	  This is used by drivers that don't provide their own (accelerated)
+	  version.
+
+config FB_CFB_IMAGEBLIT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the cfb_imageblit function for generic software image
+	  blitting. This is used by drivers that don't provide their own
+	  (accelerated) version.
+
+config FB_CFB_REV_PIXELS_IN_BYTE
+	bool
+	depends on FB
+	default n
+	---help---
+	  Allow generic frame-buffer functions to work on displays with 1, 2
+	  and 4 bits per pixel depths which has opposite order of pixels in
+	  byte order to bytes in long order.
+
+config FB_SYS_FILLRECT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the sys_fillrect function for generic software rectangle
+	  filling. This is used by drivers that don't provide their own
+	  (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_COPYAREA
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the sys_copyarea function for generic software area copying.
+	  This is used by drivers that don't provide their own (accelerated)
+	  version and the framebuffer is in system RAM.
+
+config FB_SYS_IMAGEBLIT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the sys_imageblit function for generic software image
+	  blitting. This is used by drivers that don't provide their own
+	  (accelerated) version and the framebuffer is in system RAM.
+
+menuconfig FB_FOREIGN_ENDIAN
+	bool "Framebuffer foreign endianness support"
+	depends on FB
+	---help---
+	  This menu will let you enable support for the framebuffers with
+	  non-native endianness (e.g. Little-Endian framebuffer on a
+	  Big-Endian machine). Most probably you don't have such hardware,
+	  so it's safe to say "n" here.
+
+choice
+	prompt "Choice endianness support"
+	depends on FB_FOREIGN_ENDIAN
+
+config FB_BOTH_ENDIAN
+	bool "Support for Big- and Little-Endian framebuffers"
+
+config FB_BIG_ENDIAN
+	bool "Support for Big-Endian framebuffers only"
+
+config FB_LITTLE_ENDIAN
+	bool "Support for Little-Endian framebuffers only"
+
+endchoice
+
+config FB_SYS_FOPS
+       tristate
+       depends on FB
+       default n
+
+config FB_DEFERRED_IO
+	bool
+	depends on FB
+
+config FB_HECUBA
+	tristate
+	depends on FB
+	depends on FB_DEFERRED_IO
+
+config FB_SVGALIB
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Common utility functions useful to fbdev drivers of VGA-based
+	  cards.
+
+config FB_MACMODES
+       tristate
+       depends on FB
+       default n
+
+config FB_BACKLIGHT
+	bool
+	depends on FB
+	select BACKLIGHT_LCD_SUPPORT
+	select BACKLIGHT_CLASS_DEVICE
+	default n
+
+config FB_MODE_HELPERS
+        bool "Enable Video Mode Handling Helpers"
+        depends on FB
+	default n
+	---help---
+	  This enables functions for handling video modes using the
+	  Generalized Timing Formula and the EDID parser. A few drivers rely
+          on this feature such as the radeonfb, rivafb, and the i810fb. If
+	  your driver does not take advantage of this feature, choosing Y will
+	  just increase the kernel size by about 5K.
+
+config FB_TILEBLITTING
+       bool "Enable Tile Blitting Support"
+       depends on FB
+       default n
+       ---help---
+         This enables tile blitting.  Tile blitting is a drawing technique
+	 where the screen is divided into rectangular sections (tiles), whereas
+	 the standard blitting divides the screen into pixels. Because the
+	 default drawing element is a tile, drawing functions will be passed
+	 parameters in terms of number of tiles instead of number of pixels.
+	 For example, to draw a single character, instead of using bitmaps,
+	 an index to an array of bitmaps will be used.  To clear or move a
+	 rectangular section of a screen, the rectangle will be described in
+	 terms of number of tiles in the x- and y-axis.
+
+	 This is particularly important to one driver, matroxfb.  If
+	 unsure, say N.
+
+comment "Frame buffer hardware drivers"
+	depends on FB
+
+config FB_GRVGA
+	tristate "Aeroflex Gaisler framebuffer support"
+	depends on FB && SPARC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
+
+config FB_CIRRUS
+	tristate "Cirrus Logic support"
+	depends on FB && (ZORRO || PCI)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  This enables support for Cirrus Logic GD542x/543x based boards on
+	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
+
+	  If you have a PCI-based system, this enables support for these
+	  chips: GD-543x, GD-544x, GD-5480.
+
+	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
+
+	  Say N unless you have such a graphics board or plan to get one
+	  before you next recompile the kernel.
+
+config FB_PM2
+	tristate "Permedia2 support"
+	depends on FB && ((AMIGA && BROKEN) || PCI)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for cards based on
+	  the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+	  The driver was tested on the following cards:
+		Diamond FireGL 1000 PRO AGP
+		ELSA Gloria Synergy PCI
+		Appian Jeronimo PRO (both heads) PCI
+		3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+		ASK Graphic Blaster Exxtreme AGP
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pm2fb.
+
+config FB_PM2_FIFO_DISCONNECT
+	bool "enable FIFO disconnect feature"
+	depends on FB_PM2 && PCI
+	help
+	  Support the Permedia2 FIFO disconnect feature.
+
+config FB_ARMCLCD
+	tristate "ARM PrimeCell PL110 support"
+	depends on ARM || ARM64 || COMPILE_TEST
+	depends on FB && ARM_AMBA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This framebuffer device driver is for the ARM PrimeCell PL110
+	  Colour LCD controller.  ARM PrimeCells provide the building
+	  blocks for System on a Chip devices.
+
+	  If you want to compile this as a module (=code which can be
+	  inserted into and removed from the running kernel), say M
+	  here and read <file:Documentation/kbuild/modules.txt>.  The module
+	  will be called amba-clcd.
+
+config FB_ACORN
+	bool "Acorn VIDC support"
+	depends on (FB = y) && ARM && ARCH_ACORN
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Acorn VIDC graphics
+	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
+	  unsure, say N.
+
+config FB_CLPS711X
+	bool "CLPS711X LCD support"
+	depends on (FB = y) && ARM && ARCH_CLPS711X
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y to enable the Framebuffer driver for the CLPS7111 and
+	  EP7212 processors.
+
+config FB_SA1100
+	bool "SA-1100 LCD support"
+	depends on (FB = y) && ARM && ARCH_SA1100
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is a framebuffer device for the SA-1100 LCD Controller.
+	  See <http://www.linux-fbdev.org/> for information on framebuffer
+	  devices.
+
+	  If you plan to use the LCD display with your SA-1100 system, say
+	  Y here.
+
+config FB_IMX
+	tristate "Freescale i.MX1/21/25/27 LCD support"
+	depends on FB && ARCH_MXC
+	select BACKLIGHT_LCD_SUPPORT
+	select LCD_CLASS_DEVICE
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+
+config FB_CYBER2000
+	tristate "CyberPro 2000/2010/5000 support"
+	depends on FB && PCI && (BROKEN || !SPARC64)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This enables support for the Integraphics CyberPro 20x0 and 5000
+	  VGA chips used in the Rebel.com Netwinder and other machines.
+	  Say Y if you have a NetWinder or a graphics card containing this
+	  device, otherwise say N.
+
+config FB_CYBER2000_DDC
+	bool "DDC for CyberPro support"
+	depends on FB_CYBER2000
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC support for your CyberPro graphics
+	  card. This is only I2C bus support, driver does not use EDID.
+
+config FB_CYBER2000_I2C
+	bool "CyberPro 2000/2010/5000 I2C support"
+	depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
+	select I2C_ALGOBIT
+	help
+	  Enable support for the I2C video decoder interface on the
+	  Integraphics CyberPro 20x0 and 5000 VGA chips.  This is used
+	  on the Netwinder machines for the SAA7111 video capture.
+
+config FB_APOLLO
+	bool
+	depends on (FB = y) && APOLLO
+	default y
+	select FB_CFB_FILLRECT
+	select FB_CFB_IMAGEBLIT
+
+config FB_Q40
+	bool
+	depends on (FB = y) && Q40
+	default y
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+
+config FB_AMIGA
+	tristate "Amiga native chipset support"
+	depends on FB && AMIGA
+	help
+	  This is the frame buffer device driver for the builtin graphics
+	  chipset found in Amigas.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called amifb.
+
+config FB_AMIGA_OCS
+	bool "Amiga OCS chipset support"
+	depends on FB_AMIGA
+	help
+	  This enables support for the original Agnus and Denise video chips,
+	  found in the Amiga 1000 and most A500's and A2000's. If you intend
+	  to run Linux on any of these systems, say Y; otherwise say N.
+
+config FB_AMIGA_ECS
+	bool "Amiga ECS chipset support"
+	depends on FB_AMIGA
+	help
+	  This enables support for the Enhanced Chip Set, found in later
+	  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
+	  you intend to run Linux on any of these systems, say Y; otherwise
+	  say N.
+
+config FB_AMIGA_AGA
+	bool "Amiga AGA chipset support"
+	depends on FB_AMIGA
+	help
+	  This enables support for the Advanced Graphics Architecture (also
+	  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
+	  and CD32. If you intend to run Linux on any of these systems, say Y;
+	  otherwise say N.
+
+config FB_FM2
+	bool "Amiga FrameMaster II/Rainbow II support"
+	depends on (FB = y) && ZORRO
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Amiga FrameMaster
+	  card from BSC (exhibited 1992 but not shipped as a CBM product).
+
+config FB_ARC
+	tristate "Arc Monochrome LCD board support"
+	depends on FB && X86
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  This enables support for the Arc Monochrome LCD board. The board
+	  is based on the KS-108 lcd controller and is typically a matrix
+	  of 2*n chips. This driver was tested with a 128x64 panel. This
+	  driver supports it for use with x86 SBCs through a 16 bit GPIO
+	  interface (8 bit data, 8 bit control). If you anticipate using
+	  this driver, say Y or M; otherwise say N. You must specify the
+	  GPIO IO address to be used for setting control and data.
+
+config FB_ATARI
+	bool "Atari native chipset support"
+	depends on (FB = y) && ATARI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the builtin graphics
+	  chipset found in Ataris.
+
+config FB_OF
+	bool "Open Firmware frame buffer device support"
+	depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  Say Y if you want support with Open Firmware for your graphics
+	  board.
+
+config FB_CONTROL
+	bool "Apple \"control\" display support"
+	depends on (FB = y) && PPC_PMAC && PPC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  This driver supports a frame buffer for the graphics adapter in the
+	  Power Macintosh 7300 and others.
+
+config FB_PLATINUM
+	bool "Apple \"platinum\" display support"
+	depends on (FB = y) && PPC_PMAC && PPC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  This driver supports a frame buffer for the "platinum" graphics
+	  adapter in some Power Macintoshes.
+
+config FB_VALKYRIE
+	bool "Apple \"valkyrie\" display support"
+	depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  This driver supports a frame buffer for the "valkyrie" graphics
+	  adapter in some Power Macintoshes.
+
+config FB_CT65550
+	bool "Chips 65550 display support"
+	depends on (FB = y) && PPC32 && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Chips & Technologies
+	  65550 graphics chip in PowerBooks.
+
+config FB_ASILIANT
+	bool "Asiliant (Chips) 69000 display support"
+	depends on (FB = y) && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Asiliant 69030 chipset
+
+config FB_IMSTT
+	bool "IMS Twin Turbo display support"
+	depends on (FB = y) && PCI
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES if PPC
+	help
+	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
+	  many Macintosh and compatible computers.
+
+config FB_VGA16
+	tristate "VGA 16-color graphics support"
+	depends on FB && (X86 || PPC)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	help
+	  This is the frame buffer device driver for VGA 16 color graphic
+	  cards. Say Y if you have such a card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vga16fb.
+
+config FB_BF54X_LQ043
+	tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+	depends on FB && (BF54x) && !BF542
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
+config FB_BFIN_T350MCQB
+	tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+	depends on FB && BLACKFIN
+	select BFIN_GPTIMERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+	 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+	 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+config FB_BFIN_LQ035Q1
+	tristate "SHARP LQ035Q1DH02 TFT LCD"
+	depends on FB && BLACKFIN && SPI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BFIN_GPTIMERS
+	help
+	  This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
+	  the Blackfin Landscape LCD EZ-Extender Card.
+	  This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
+	  It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin-lq035q1-fb.
+
+config FB_BF537_LQ035
+	tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
+	depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BFIN_GPTIMERS
+	help
+	  This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
+	  attached to a BF537.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bf537-lq035.
+
+config FB_BFIN_7393
+	tristate "Blackfin ADV7393 Video encoder"
+	depends on FB && BLACKFIN
+	select I2C
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for a ADV7393 video encoder
+	  attached to a Blackfin on the PPI port.
+	  If your Blackfin board has a ADV7393 select Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_adv7393fb.
+
+choice
+	prompt  "Video mode support"
+	depends on FB_BFIN_7393
+	default NTSC
+
+config NTSC
+	bool 'NTSC 720x480'
+
+config PAL
+	bool 'PAL 720x576'
+
+config NTSC_640x480
+	bool 'NTSC 640x480 (Experimental)'
+
+config PAL_640x480
+	bool 'PAL 640x480 (Experimental)'
+
+config NTSC_YCBCR
+	bool 'NTSC 720x480 YCbCR input'
+
+config PAL_YCBCR
+	bool 'PAL 720x576 YCbCR input'
+
+endchoice
+
+choice
+	prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
+	depends on (FB_BFIN_7393)
+	default ADV7393_1XMEM
+
+config ADV7393_1XMEM
+	bool 'Single'
+
+config ADV7393_2XMEM
+	bool 'Double'
+endchoice
+
+config FB_STI
+	tristate "HP STI frame buffer device support"
+	depends on FB && PARISC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select STI_CONSOLE
+	select VT
+	default y
+	---help---
+	  STI refers to the HP "Standard Text Interface" which is a set of
+	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
+	  Enabling this option will implement the linux framebuffer device
+	  using calls to the STI BIOS routines for initialisation.
+	
+	  If you enable this option, you will get a planar framebuffer device
+	  /dev/fb which will work on the most common HP graphic cards of the
+	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
+	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
+
+	  It is safe to enable this option, so you should probably say "Y".
+
+config FB_MAC
+	bool "Generic Macintosh display support"
+	depends on (FB = y) && MAC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+
+config FB_HP300
+	bool
+	depends on (FB = y) && DIO
+	select FB_CFB_IMAGEBLIT
+	default y
+
+config FB_TGA
+	tristate "TGA/SFB+ framebuffer support"
+	depends on FB && (ALPHA || TC)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BITREVERSE
+	---help---
+	  This is the frame buffer device driver for generic TGA and SFB+
+	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
+	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
+	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
+
+	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
+	  for DECstation 5000/200 systems.  Additionally due to firmware
+	  limitations these cards may cause troubles with booting DECstation
+	  5000/240 and /260 systems, but are fully supported under Linux if
+	  you manage to get it going. ;-)
+
+	  Say Y if you have one of those.
+
+config FB_UVESA
+	tristate "Userspace VESA VGA graphics support"
+	depends on FB && CONNECTOR
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	help
+	  This is the frame buffer driver for generic VBE 2.0 compliant
+	  graphic cards. It can also take advantage of VBE 3.0 features,
+	  such as refresh rate adjustment.
+
+	  This driver generally provides more features than vesafb but
+	  requires a userspace helper application called 'v86d'. See
+	  <file:Documentation/fb/uvesafb.txt> for more information.
+
+	  If unsure, say N.
+
+config FB_VESA
+	bool "VESA VGA graphics support"
+	depends on (FB = y) && X86
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BOOT_VESA_SUPPORT
+	help
+	  This is the frame buffer device driver for generic VESA 2.0
+	  compliant graphic cards. The older VESA 1.2 cards are not supported.
+	  You will get a boot time penguin logo at no additional cost. Please
+	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+
+config FB_EFI
+	bool "EFI-based Framebuffer Support"
+	depends on (FB = y) && X86 && EFI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the EFI frame buffer device driver. If the firmware on
+	  your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
+	  using the EFI framebuffer as your console.
+
+config FB_N411
+       tristate "N411 Apollo/Hecuba devkit support"
+       depends on FB && X86 && MMU
+       select FB_SYS_FILLRECT
+       select FB_SYS_COPYAREA
+       select FB_SYS_IMAGEBLIT
+       select FB_SYS_FOPS
+       select FB_DEFERRED_IO
+       select FB_HECUBA
+       help
+         This enables support for the Apollo display controller in its
+         Hecuba form using the n411 devkit.
+
+config FB_HGA
+	tristate "Hercules mono graphics support"
+	depends on FB && X86
+	help
+	  Say Y here if you have a Hercules mono graphics card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hgafb.
+
+	  As this card technology is at least 25 years old,
+	  most people will answer N here.
+
+config FB_GBE
+	bool "SGI Graphics Backend frame buffer support"
+	depends on (FB = y) && SGI_IP32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+ 	help
+	  This is the frame buffer device driver for SGI Graphics Backend.
+	  This chip is used in SGI O2 and Visual Workstation 320/540.
+
+config FB_GBE_MEM
+	int "Video memory size in MB"
+	depends on FB_GBE
+	default 4
+	help
+	  This is the amount of memory reserved for the framebuffer,
+	  which can be any value between 1MB and 8MB.
+
+config FB_SBUS
+	bool "SBUS and UPA framebuffers"
+	depends on (FB = y) && SPARC
+	help
+	  Say Y if you want support for SBUS or UPA based frame buffer device.
+
+config FB_BW2
+	bool "BWtwo support"
+	depends on (FB = y) && (SPARC && FB_SBUS)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the BWtwo frame buffer.
+
+config FB_CG3
+	bool "CGthree support"
+	depends on (FB = y) && (SPARC && FB_SBUS)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGthree frame buffer.
+
+config FB_CG6
+	bool "CGsix (GX,TurboGX) support"
+	depends on (FB = y) && (SPARC && FB_SBUS)
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGsix (GX, TurboGX)
+	  frame buffer.
+
+config FB_FFB
+	bool "Creator/Creator3D/Elite3D support"
+	depends on FB_SBUS && SPARC64
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Creator, Creator3D,
+	  and Elite3D graphics boards.
+
+config FB_TCX
+	bool "TCX (SS4/SS5 only) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the TCX 24/8bit frame
+	  buffer.
+
+config FB_CG14
+	bool "CGfourteen (SX) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGfourteen frame
+	  buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+	bool "P9100 (Sparcbook 3 only) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the P9100 card
+	  supported on Sparcbook 3 machines.
+
+config FB_LEO
+	bool "Leo (ZX) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the SBUS-based Sun ZX
+	  (leo) frame buffer cards.
+
+config FB_IGA
+	bool "IGA 168x display support"
+	depends on (FB = y) && SPARC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the INTERGRAPHICS 1680 and
+	  successor frame buffer cards.
+
+config FB_XVR500
+	bool "Sun XVR-500 3DLABS Wildcat support"
+	depends on (FB = y) && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firmware has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
+config FB_XVR2500
+	bool "Sun XVR-2500 3DLABS Wildcat support"
+	depends on (FB = y) && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-2500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firmware has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
+config FB_XVR1000
+	bool "Sun XVR-1000 support"
+	depends on (FB = y) && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-1000 and similar
+	  graphics cards.  The driver only works on sparc64 systems where
+	  the system firmware has mostly initialized the card already.  It
+	  is treated as a completely dumb framebuffer device.
+
+config FB_PVR2
+	tristate "NEC PowerVR 2 display support"
+	depends on FB && SH_DREAMCAST
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
+	  run linux on your Dreamcast, you will have to say Y here.
+	  This driver may or may not work on other PowerVR 2 cards, but is
+	  totally untested.  Use at your own risk.  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pvr2fb.
+
+	  You can pass several parameters to the driver at boot time or at
+	  module load time.  The parameters look like "video=pvr2:XXX", where
+	  the meaning of XXX can be found at the end of the main source file
+	  (<file:drivers/video/pvr2fb.c>). Please see the file
+	  <file:Documentation/fb/pvr2fb.txt>.
+
+config FB_OPENCORES
+	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
+	depends on FB && HAS_DMA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This enables support for the OpenCores VGA/LCD core.
+
+	  The OpenCores VGA/LCD core is typically used together with
+	  softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
+	  systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
+
+	  The source code and specification for the core is available at
+	  <http://opencores.org/project,vga_lcd>
+
+config FB_S1D13XXX
+	tristate "Epson S1D13XXX framebuffer support"
+	depends on FB
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Support for S1D13XXX framebuffer device family (currently only
+	  working with S1D13806). Product specs at
+	  <http://vdc.epson.com/>
+
+config FB_ATMEL
+	tristate "AT91/AT32 LCD Controller support"
+	depends on FB && HAVE_FB_ATMEL
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+	bool "Frame Buffer in internal SRAM"
+	depends on FB_ATMEL && ARCH_AT91SAM9261
+	help
+	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+	  to let frame buffer in external SDRAM.
+
+config FB_ATMEL_STN
+	bool "Use a STN display with AT91/AT32 LCD Controller"
+	depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
+	default n
+	help
+	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+	  Controller. Say N if you want to connect a TFT.
+
+	  If unsure, say N.
+
+config FB_NVIDIA
+	tristate "nVidia Framebuffer Support"
+	depends on FB && PCI
+	select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BITREVERSE
+	select VGASTATE
+	help
+	  This driver supports graphics boards with the nVidia chips, TNT
+	  and newer. For very old chipsets, such as the RIVA128, then use
+	  the rivafb.
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvidiafb.
+
+config FB_NVIDIA_I2C
+       bool "Enable DDC Support"
+       depends on FB_NVIDIA
+       select FB_DDC
+       help
+	  This enables I2C support for nVidia Chipsets.  This is used
+	  only for getting EDID information from the attached display
+	  allowing for robust video mode handling and switching.
+
+	  Because fbdev-2.6 requires that drivers must be able to
+	  independently validate video mode parameters, you should say Y
+	  here.
+
+config FB_NVIDIA_DEBUG
+	bool "Lots of debug output"
+	depends on FB_NVIDIA
+	default n
+	help
+	  Say Y here if you want the nVidia driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_NVIDIA_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_NVIDIA
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_RIVA
+	tristate "nVidia Riva support"
+	depends on FB && PCI
+	select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BITREVERSE
+	select VGASTATE
+	help
+	  This driver supports graphics boards with the nVidia Riva/Geforce
+	  chips.
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rivafb.
+
+config FB_RIVA_I2C
+       bool "Enable DDC Support"
+       depends on FB_RIVA
+       select FB_DDC
+       help
+	  This enables I2C support for nVidia Chipsets.  This is used
+	  only for getting EDID information from the attached display
+	  allowing for robust video mode handling and switching.
+
+	  Because fbdev-2.6 requires that drivers must be able to
+	  independently validate video mode parameters, you should say Y
+	  here.
+
+config FB_RIVA_DEBUG
+	bool "Lots of debug output"
+	depends on FB_RIVA
+	default n
+	help
+	  Say Y here if you want the Riva driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_RIVA_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_RIVA
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_I740
+	tristate "Intel740 support"
+	depends on FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	select FB_DDC
+	help
+	  This driver supports graphics cards based on Intel740 chip.
+
+config FB_I810
+	tristate "Intel 810/815 support"
+	depends on FB && PCI && X86_32 && AGP_INTEL
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	help
+	  This driver supports the on-board graphics built in to the Intel 810 
+          and 815 chipsets.  Say Y if you have and plan to use such a board.
+
+          To compile this driver as a module, choose M here: the
+	  module will be called i810fb.
+
+          For more information, please read 
+	  <file:Documentation/fb/intel810.txt>
+
+config FB_I810_GTF
+	bool "use VESA Generalized Timing Formula"
+	depends on FB_I810
+	help
+	  If you say Y, then the VESA standard, Generalized Timing Formula 
+          or GTF, will be used to calculate the required video timing values
+	  per video mode.  Since the GTF allows nondiscrete timings 
+          (nondiscrete being a range of values as opposed to discrete being a
+          set of values), you'll be able to use any combination of horizontal 
+	  and vertical resolutions, and vertical refresh rates without having
+	  to specify your own timing parameters.  This is especially useful
+	  to maximize the performance of an aging display, or if you just 
+          have a display with nonstandard dimensions. A VESA compliant 
+	  monitor is recommended, but can still work with non-compliant ones.
+	  If you need or want this, then select this option. The timings may 
+	  not be compliant with Intel's recommended values. Use at your own 
+	  risk.
+
+          If you say N, the driver will revert to discrete video timings 
+	  using a set recommended by Intel in their documentation.
+  
+          If unsure, say N.
+
+config FB_I810_I2C
+	bool "Enable DDC Support"
+	depends on FB_I810 && FB_I810_GTF
+	select FB_DDC
+	help
+
+config FB_LE80578
+	tristate "Intel LE80578 (Vermilion) support"
+	depends on FB && PCI && X86
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This driver supports the LE80578 (Vermilion Range) chipset
+
+config FB_CARILLO_RANCH
+	tristate "Intel Carillo Ranch support"
+	depends on FB_LE80578 && FB && PCI && X86
+	help
+	  This driver supports the LE80578 (Carillo Ranch) board
+
+config FB_INTEL
+	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
+	depends on FB && PCI && X86 && AGP_INTEL && EXPERT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+	depends on !DRM_I915
+	help
+	  This driver supports the on-board graphics built in to the Intel
+          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
+          Say Y if you have and plan to use such a board.
+
+	  To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called intelfb.
+
+	  For more information, please read <file:Documentation/fb/intelfb.txt>
+
+config FB_INTEL_DEBUG
+	bool "Intel driver Debug Messages"
+	depends on FB_INTEL
+	---help---
+	  Say Y here if you want the Intel driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_INTEL_I2C
+	bool "DDC/I2C for Intel framebuffer support"
+	depends on FB_INTEL
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
+
+config FB_MATROX
+	tristate "Matrox acceleration"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_MACMODES if PPC_PMAC
+	---help---
+	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
+	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
+	  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
+	  Matrox G400, G450 or G550 card in your box.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called matroxfb.
+
+	  You can pass several parameters to the driver at boot time or at
+	  module load time. The parameters look like "video=matroxfb:XXX", and
+	  are described in <file:Documentation/fb/matroxfb.txt>.
+
+config FB_MATROX_MILLENIUM
+	bool "Millennium I/II support"
+	depends on FB_MATROX
+	help
+	  Say Y here if you have a Matrox Millennium or Matrox Millennium II
+	  video card. If you select "Advanced lowlevel driver options" below,
+	  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
+	  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
+	  also use font widths different from 8.
+
+config FB_MATROX_MYSTIQUE
+	bool "Mystique support"
+	depends on FB_MATROX
+	help
+	  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
+	  video card. If you select "Advanced lowlevel driver options" below,
+	  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
+	  packed pixel and 32 bpp packed pixel. You can also use font widths
+	  different from 8.
+
+config FB_MATROX_G
+	bool "G100/G200/G400/G450/G550 support"
+	depends on FB_MATROX
+	---help---
+	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
+	  video card. If you select "Advanced lowlevel driver options", you
+	  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
+	  pixel and 32 bpp packed pixel. You can also use font widths
+	  different from 8.
+
+	  If you need support for G400 secondary head, you must say Y to
+	  "Matrox I2C support" and "G400 second head support" right below.
+	  G450/G550 secondary head and digital output are supported without
+	  additional modules.
+
+	  The driver starts in monitor mode. You must use the matroxset tool 
+	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
+	  swap primary and secondary head outputs, or to change output mode.  
+	  Secondary head driver always start in 640x480 resolution and you 
+	  must use fbset to change it.
+
+	  Do not forget that second head supports only 16 and 32 bpp
+	  packed pixels, so it is a good idea to compile them into the kernel
+	  too. You can use only some font widths, as the driver uses generic
+	  painting procedures (the secondary head does not use acceleration
+	  engine).
+
+	  G450/G550 hardware can display TV picture only from secondary CRTC,
+	  and it performs no scaling, so picture must have 525 or 625 lines.
+
+config FB_MATROX_I2C
+	tristate "Matrox I2C support"
+	depends on FB_MATROX
+	select FB_DDC
+	---help---
+	  This drivers creates I2C buses which are needed for accessing the
+	  DDC (I2C) bus present on all Matroxes, an I2C bus which
+	  interconnects Matrox optional devices, like MGA-TVO on G200 and
+	  G400, and the secondary head DDC bus, present on G400 only.
+
+	  You can say Y or M here if you want to experiment with monitor
+	  detection code. You must say Y or M here if you want to use either
+	  second head of G400 or MGA-TVO on G200 or G400.
+
+	  If you compile it as module, it will create a module named
+	  i2c-matroxfb.
+
+config FB_MATROX_MAVEN
+	tristate "G400 second head support"
+	depends on FB_MATROX_G && FB_MATROX_I2C
+	---help---
+	  WARNING !!! This support does not work with G450 !!!
+
+	  Say Y or M here if you want to use a secondary head (meaning two
+	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
+	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
+	  secondary head output is blanked while you are in X. With XFree
+	  3.9.17 preview you can use both heads if you use SVGA over fbdev or
+	  the fbdev driver on first head and the fbdev driver on second head.
+
+	  If you compile it as module, two modules are created,
+	  matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
+	  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
+	  also load i2c-matroxfb to get it to run.
+
+	  The driver starts in monitor mode and you must use the matroxset
+	  tool (available at
+	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
+	  PAL or NTSC or to swap primary and secondary head outputs.
+	  Secondary head driver also always start in 640x480 resolution, you
+	  must use fbset to change it.
+
+	  Also do not forget that second head supports only 16 and 32 bpp
+	  packed pixels, so it is a good idea to compile them into the kernel
+	  too.  You can use only some font widths, as the driver uses generic
+	  painting procedures (the secondary head does not use acceleration
+	  engine).
+
+config FB_RADEON
+	tristate "ATI Radeon display support"
+	depends on FB && PCI
+	select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES if PPC_OF
+	help
+	  Choose this option if you want to use an ATI Radeon graphics card as
+	  a framebuffer device.  There are both PCI and AGP versions.  You
+	  don't need to choose this to run the Radeon in plain VGA mode.
+
+	  There is a product page at
+	  http://products.amd.com/en-us/GraphicCardResult.aspx
+
+config FB_RADEON_I2C
+	bool "DDC/I2C for ATI Radeon support"
+	depends on FB_RADEON
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your Radeon board. 
+
+config FB_RADEON_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_RADEON
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_RADEON_DEBUG
+	bool "Lots of debug output from Radeon driver"
+	depends on FB_RADEON
+	default n
+	help
+	  Say Y here if you want the Radeon driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_ATY128
+	tristate "ATI Rage128 display support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
+	select FB_MACMODES if PPC_PMAC
+	help
+	  This driver supports graphics boards with the ATI Rage128 chips.
+	  Say Y if you have such a graphics board and read
+	  <file:Documentation/fb/aty128fb.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aty128fb.
+
+config FB_ATY128_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_ATY128
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_ATY
+	tristate "ATI Mach64 display support" if PCI || ATARI
+	depends on FB && !SPARC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
+	select FB_MACMODES if PPC
+	help
+	  This driver supports graphics boards with the ATI Mach64 chips.
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atyfb.
+
+config FB_ATY_CT
+	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
+	depends on PCI && FB_ATY
+	default y if SPARC64 && PCI
+	help
+	  Say Y here to support use of ATI's 64-bit Rage boards (or other
+	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
+	  framebuffer device.  The ATI product support page for these boards
+	  is at <http://support.ati.com/products/pc/mach64/mach64.html>.
+
+config FB_ATY_GENERIC_LCD
+	bool "Mach64 generic LCD support"
+	depends on FB_ATY_CT
+	help
+	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
+	  Rage XC, or Rage XL chipset.
+
+config FB_ATY_GX
+	bool "Mach64 GX support" if PCI
+	depends on FB_ATY
+	default y if ATARI
+	help
+	  Say Y here to support use of the ATI Mach64 Graphics Expression
+	  board (or other boards based on the Mach64 GX chipset) as a
+	  framebuffer device.  The ATI product support page for these boards
+	  is at
+	  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+
+config FB_ATY_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_ATY
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_S3
+	tristate "S3 Trio/Virge support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for graphics boards with S3 Trio / S3 Virge chip.
+
+config FB_S3_DDC
+	bool "DDC for S3 support"
+	depends on FB_S3
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC support for your S3 graphics card.
+
+config FB_SAVAGE
+	tristate "S3 Savage support"
+	depends on FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	help
+	  This driver supports notebooks and computers with S3 Savage PCI/AGP
+	  chips.
+
+	  Say Y if you have such a graphics card.
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called savagefb.
+
+config FB_SAVAGE_I2C
+       bool "Enable DDC2 Support"
+       depends on FB_SAVAGE
+       select FB_DDC
+       help
+	  This enables I2C support for S3 Savage Chipsets.  This is used
+	  only for getting EDID information from the attached display
+	  allowing for robust video mode handling and switching.
+
+	  Because fbdev-2.6 requires that drivers must be able to
+	  independently validate video mode parameters, you should say Y
+	  here.
+
+config FB_SAVAGE_ACCEL
+       bool "Enable Console Acceleration"
+       depends on FB_SAVAGE
+       default n
+       help
+          This option will compile in console acceleration support. If
+          the resulting framebuffer console has bothersome glitches, then
+          choose N here.
+
+config FB_SIS
+	tristate "SiS/XGI display support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BOOT_VESA_SUPPORT if FB_SIS = y
+	help
+	  This is the frame buffer device driver for the SiS 300, 315, 330
+	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
+	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called sisfb.
+
+config FB_SIS_300
+	bool "SiS 300 series support"
+	depends on FB_SIS
+	help
+	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.
+
+config FB_SIS_315
+	bool "SiS 315/330/340 series and XGI support"
+	depends on FB_SIS
+	help
+	  Say Y here to support use of the SiS 315, 330 and 340 series
+	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
+	  as XGI V3XT, V5, V8 and Z7.
+
+config FB_VIA
+       tristate "VIA UniChrome (Pro) and Chrome9 display support"
+       depends on FB && PCI && X86
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       select I2C_ALGOBIT
+       select I2C
+       select GPIOLIB
+       help
+	  This is the frame buffer device driver for Graphics chips of VIA
+	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
+	  CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
+ 	  /P4M900,VX800)
+	  Say Y if you have a VIA UniChrome graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called viafb.
+
+if FB_VIA
+
+config FB_VIA_DIRECT_PROCFS
+	bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
+	depends on FB_VIA
+	default n
+	help
+	  Allow direct hardware access to some output registers via procfs.
+	  This is dangerous but may provide the only chance to get the
+	  correct output device configuration.
+	  Its use is strongly discouraged.
+
+config FB_VIA_X_COMPATIBILITY
+	bool "X server compatibility"
+	depends on FB_VIA
+	default n
+	help
+	  This option reduces the functionality (power saving, ...) of the
+	  framebuffer to avoid negative impact on the OpenChrome X server.
+	  If you use any X server other than fbdev you should enable this
+	  otherwise it should be safe to disable it and allow using all
+	  features.
+
+endif
+
+config FB_NEOMAGIC
+	tristate "NeoMagic display support"
+	depends on FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	help
+	  This driver supports notebooks with NeoMagic PCI chips.
+	  Say Y if you have such a graphics card. 
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called neofb.
+
+config FB_KYRO
+	tristate "IMG Kyro support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
+	  graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kyrofb.
+
+config FB_3DFX
+	tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
+	depends on FB && PCI
+	select FB_CFB_IMAGEBLIT
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_MODE_HELPERS
+	help
+	  This driver supports graphics boards with the 3Dfx Banshee,
+	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+	  such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tdfxfb.
+
+config FB_3DFX_ACCEL
+	bool "3Dfx Acceleration functions"
+	depends on FB_3DFX
+	---help---
+	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+	device driver with acceleration functions.
+
+config FB_3DFX_I2C
+	bool "Enable DDC/I2C support"
+	depends on FB_3DFX
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
+
+config FB_VOODOO1
+	tristate "3Dfx Voodoo Graphics (sst1) support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
+	  Voodoo2 (cvg) based graphics card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sstfb.
+
+	  WARNING: Do not use any application that uses the 3D engine
+	  (namely glide) while using this driver.
+	  Please read the <file:Documentation/fb/sstfb.txt> for supported
+	  options and other important info  support.
+
+config FB_VT8623
+	tristate "VIA VT8623 support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for CastleRock integrated graphics core in the
+	  VIA VT8623 [Apollo CLE266] chipset.
+
+config FB_TRIDENT
+	tristate "Trident/CyberXXX/CyberBlade support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  This is the frame buffer device driver for Trident PCI/AGP chipsets.
+	  Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+	  and Blade XP.
+	  There are also integrated versions of these chips called CyberXXXX,
+	  CyberImage or CyberBlade. These chips are mostly found in laptops
+	  but also on some motherboards including early VIA EPIA motherboards.
+	  For more information, read <file:Documentation/fb/tridentfb.txt>
+
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tridentfb.
+
+config FB_ARK
+	tristate "ARK 2000PV support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for PCI graphics boards with ARK 2000PV chip
+	  and ICS 5342 RAMDAC.
+
+config FB_PM3
+	tristate "Permedia3 support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the 3DLabs Permedia3
+	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
+	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
+	  and maybe other boards.
+
+config FB_CARMINE
+	tristate "Fujitsu carmine frame buffer support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Fujitsu Carmine chip.
+	  The driver provides two independent frame buffer devices.
+
+choice
+	depends on FB_CARMINE
+	prompt "DRAM timing"
+	default FB_CARMINE_DRAM_EVAL
+
+config FB_CARMINE_DRAM_EVAL
+	bool "Eval board timings"
+	help
+	  Use timings which work on the eval card.
+
+config CARMINE_DRAM_CUSTOM
+	bool "Custom board timings"
+	help
+	  Use custom board timings.
+endchoice
+
+config FB_AU1100
+	bool "Au1100 LCD Driver"
+	depends on (FB = y) && MIPS_ALCHEMY
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer driver for the AMD Au1100 SOC.  It can drive
+	  various panels and CRTs by passing in kernel cmd line option
+	  au1100fb:panel=<name>.
+
+config FB_AU1200
+	bool "Au1200/Au1300 LCD Driver"
+	depends on (FB = y) && MIPS_ALCHEMY
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  This is the framebuffer driver for the Au1200/Au1300 SOCs.
+	  It can drive various panels and CRTs by passing in kernel cmd line
+	  option au1200fb:panel=<name>.
+
+config FB_VT8500
+	bool "VIA VT8500 framebuffer support"
+	depends on (FB = y) && ARM && ARCH_VT8500
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  This is the framebuffer driver for VIA VT8500 integrated LCD
+	  controller.
+
+config FB_WM8505
+	bool "Wondermedia WM8xxx-series frame buffer support"
+	depends on (FB = y) && ARM && ARCH_VT8500
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  This is the framebuffer driver for WonderMedia WM8xxx-series
+	  integrated LCD controller. This driver covers the WM8505, WM8650
+	  and WM8850 SoCs.
+
+config FB_WMT_GE_ROPS
+	bool "VT8500/WM8xxx accelerated raster ops support"
+	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
+	default n
+	help
+	  This adds support for accelerated raster operations on the
+	  VIA VT8500 and Wondermedia 85xx series SoCs.
+
+source "drivers/video/fbdev/geode/Kconfig"
+
+config FB_HIT
+	tristate "HD64461 Frame Buffer support"
+	depends on FB && HD64461
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Hitachi HD64461 LCD
+	  frame buffer card.
+
+config FB_PMAG_AA
+	bool "PMAG-AA TURBOchannel framebuffer support"
+	depends on (FB = y) && TC
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
+	  used mainly in the MIPS-based DECstation series.
+
+config FB_PMAG_BA
+	tristate "PMAG-BA TURBOchannel framebuffer support"
+	depends on FB && TC
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
+	  used mainly in the MIPS-based DECstation series.
+
+config FB_PMAGB_B
+	tristate "PMAGB-B TURBOchannel framebuffer support"
+	depends on FB && TC
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
+	  in the MIPS-based DECstation series. The card is currently only
+	  supported in 1280x1024x8 mode.
+
+config FB_MAXINE
+	bool "Maxine (Personal DECstation) onboard framebuffer support"
+	depends on (FB = y) && MACH_DECSTATION
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the onboard framebuffer (1024x768x8) in the Personal
+	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,
+	  Codename "Maxine").
+
+config FB_G364
+	bool "G364 frame buffer support"
+	depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and
+	  Olivetti M700-10 systems.
+
+config FB_68328
+	bool "Motorola 68328 native frame buffer support"
+	depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y here if you want to support the built-in frame buffer of
+	  the Motorola 68328 CPU family.
+
+config FB_PXA168
+	tristate "PXA168/910 LCD framebuffer support"
+	depends on FB && (CPU_PXA168 || CPU_PXA910)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Marvell
+	  MMP processor.
+
+config FB_PXA
+	tristate "PXA LCD framebuffer support"
+	depends on FB && ARCH_PXA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Intel
+	  PXA2x0 processor.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called pxafb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_PXA_OVERLAY
+	bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
+	default n
+	depends on FB_PXA && (PXA27x || PXA3xx)
+
+config FB_PXA_SMARTPANEL
+	bool "PXA Smartpanel LCD support"
+	default n
+	depends on FB_PXA
+
+config FB_PXA_PARAMETERS
+	bool "PXA LCD command line parameters"
+	default n
+	depends on FB_PXA
+	---help---
+	  Enable the use of kernel command line or module parameters
+	  to configure the physical properties of the LCD panel when
+	  using the PXA LCD driver.
+
+	  This option allows you to override the panel parameters
+	  supplied by the platform in order to support multiple
+	  different models of flatpanel. If you will only be using a
+	  single model of flatpanel then you can safely leave this
+	  option disabled.
+
+	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
+
+config PXA3XX_GCU
+	tristate "PXA3xx 2D graphics accelerator driver"
+	depends on FB_PXA
+	help
+	  Kernelspace driver for the 2D graphics controller unit (GCU)
+	  found on PXA3xx processors. There is a counterpart driver in the
+	  DirectFB suite, see http://www.directfb.org/
+
+	  If you compile this as a module, it will be called pxa3xx_gcu.
+
+config FB_MBX
+	tristate "2700G LCD framebuffer support"
+	depends on FB && ARCH_PXA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
+	  Accelerator
+
+config FB_MBX_DEBUG
+       bool "Enable debugging info via debugfs"
+       depends on FB_MBX && DEBUG_FS
+       default n
+       ---help---
+         Enable this if you want debugging information using the debug
+         filesystem (debugfs)
+
+         If unsure, say N.
+
+config FB_FSL_DIU
+	tristate "Freescale DIU framebuffer support"
+	depends on FB && FSL_SOC
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select PPC_LIB_RHEAP
+	---help---
+	  Framebuffer driver for the Freescale SoC DIU
+
+config FB_W100
+	tristate "W100 frame buffer support"
+	depends on FB && ARCH_PXA
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+	  It can also drive the w3220 chip found on iPAQ hx4700.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called w100fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_SH_MOBILE_LCDC
+	tristate "SuperH Mobile LCDC framebuffer support"
+	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	select FB_BACKLIGHT
+	select SH_MIPI_DSI if SH_LCD_MIPI_DSI
+	---help---
+	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
+
+config FB_SH_MOBILE_HDMI
+	tristate "SuperH Mobile HDMI controller support"
+	depends on FB_SH_MOBILE_LCDC
+	select FB_MODE_HELPERS
+	select SOUND
+	select SND
+	select SND_SOC
+	---help---
+	  Driver for the on-chip SH-Mobile HDMI controller.
+
+config FB_TMIO
+	tristate "Toshiba Mobile IO FrameBuffer support"
+	depends on FB && MFD_CORE
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the Toshiba Mobile IO integrated as found
+	  on the Sharp SL-6000 series
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called tmiofb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_TMIO_ACCELL
+	bool "tmiofb acceleration"
+	depends on FB_TMIO
+	default y
+
+config FB_S3C
+	tristate "Samsung S3C framebuffer support"
+	depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
+		ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in FB controller in the Samsung
+	  SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
+	  and the S3C64XX series such as the S3C6400 and S3C6410.
+
+	  These chips all have the same basic framebuffer design with the
+	  actual capabilities depending on the chip. For instance the S3C6400
+	  and S3C6410 support 4 hardware windows whereas the S3C24XX series
+	  currently only have two.
+
+	  Currently the support is only for the S3C6400 and S3C6410 SoCs.
+
+config FB_S3C_DEBUG_REGWRITE
+       bool "Debug register writes"
+       depends on FB_S3C
+       ---help---
+         Show all register writes via pr_debug()
+
+config FB_S3C2410
+	tristate "S3C2410 LCD framebuffer support"
+	depends on FB && ARCH_S3C24XX
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Samsung
+	  S3C2410 processor.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called s3c2410fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+config FB_S3C2410_DEBUG
+	bool "S3C2410 lcd debug messages"
+	depends on FB_S3C2410
+	help
+	  Turn on debugging messages. Note that you can set/unset at run time
+	  through sysfs
+
+config FB_NUC900
+        bool "NUC900 LCD framebuffer support"
+        depends on FB && ARCH_W90X900
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        ---help---
+          Frame buffer driver for the built-in LCD controller in the Nuvoton
+          NUC900 processor
+
+config GPM1040A0_320X240
+        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
+        depends on FB_NUC900
+
+config FB_SM501
+	tristate "Silicon Motion SM501 framebuffer support"
+	depends on FB && MFD_SM501
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the CRT and LCD controllers in the Silicon
+	  Motion SM501.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called sm501fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_SMSCUFX
+	tristate "SMSC UFX6000/7000 USB Framebuffer support"
+	depends on FB && USB
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	---help---
+	  This is a kernel framebuffer driver for SMSC UFX USB devices.
+	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
+	  (USB 3.0) devices.
+	  To compile as a module, choose M here: the module name is smscufx.
+
+config FB_UDL
+	tristate "Displaylink USB Framebuffer support"
+	depends on FB && USB
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	---help---
+	  This is a kernel framebuffer driver for DisplayLink USB devices.
+	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
+	  To compile as a module, choose M here: the module name is udlfb.
+
+config FB_IBM_GXT4500
+	tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
+	depends on FB && PPC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here to enable support for the IBM GXT4000P/6000P and
+	  GXT4500P/6500P display adaptor based on Raster Engine RC1000,
+	  found on some IBM System P (pSeries) machines. This driver
+	  doesn't use Geometry Engine GT1000.
+
+config FB_PS3
+	tristate "PS3 GPU framebuffer driver"
+	depends on FB && PS3_PS3AV
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+	---help---
+	  Include support for the virtual frame buffer in the PS3 platform.
+
+config FB_PS3_DEFAULT_SIZE_M
+	int "PS3 default frame buffer size (in MiB)"
+	depends on FB_PS3
+	default 9
+	---help---
+	  This is the default size (in MiB) of the virtual frame buffer in
+	  the PS3.
+	  The default value can be overridden on the kernel command line
+	  using the "ps3fb" option (e.g. "ps3fb=9M");
+
+config FB_XILINX
+	tristate "Xilinx frame buffer support"
+	depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Include support for the Xilinx ML300/ML403 reference design
+	  framebuffer. ML300 carries a 640*480 LCD display on the board,
+	  ML403 uses a standard DB15 VGA connector.
+
+config FB_GOLDFISH
+	tristate "Goldfish Framebuffer"
+	depends on FB && HAS_DMA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for Goldfish Virtual Platform
+
+config FB_COBALT
+	tristate "Cobalt server LCD frame buffer support"
+	depends on FB && (MIPS_COBALT || MIPS_SEAD3)
+
+config FB_SH7760
+	bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
+	depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
+		|| CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Support for the SH7760/SH7763/SH7720/SH7721 integrated
+	  (D)STN/TFT LCD Controller.
+	  Supports display resolutions up to 1024x1024 pixel, grayscale and
+	  color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+	  panels <= 320 pixel horizontal resolution.
+
+config FB_DA8XX
+	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
+	depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_CFB_REV_PIXELS_IN_BYTE
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	---help---
+	  This is the frame buffer device driver for the TI LCD controller
+	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
+	  If unsure, say N.
+
+config FB_VIRTUAL
+	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	---help---
+	  This is a `virtual' frame buffer device. It operates on a chunk of
+	  unswappable kernel memory instead of on the memory of a graphics
+	  board. This means you cannot see any output sent to this frame
+	  buffer device, while it does consume precious memory. The main use
+	  of this frame buffer device is testing and debugging the frame
+	  buffer subsystem. Do NOT enable it for normal systems! To protect
+	  the innocent, it has to be enabled explicitly at boot time using the
+	  kernel option `video=vfb:'.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vfb. In order to load it, you must use
+	  the vfb_enable=1 option.
+
+	  If unsure, say N.
+
+config XEN_FBDEV_FRONTEND
+	tristate "Xen virtual frame buffer support"
+	depends on FB && XEN
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
+	select XEN_XENBUS_FRONTEND
+	default y
+	help
+	  This driver implements the front-end of the Xen virtual
+	  frame buffer driver.  It communicates with a back-end
+	  in another domain.
+
+config FB_METRONOME
+	tristate "E-Ink Metronome/8track controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  This driver implements support for the E-Ink Metronome
+	  controller. The pre-release name for this device was 8track
+	  and could also have been called by some vendors as PVI-nnnn.
+
+config FB_MB862XX
+	tristate "Fujitsu MB862xx GDC support"
+	depends on FB
+	depends on PCI || (OF && PPC)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+choice
+	prompt "GDC variant"
+	depends on FB_MB862XX
+
+config FB_MB862XX_PCI_GDC
+	bool "Carmine/Coral-P(A) GDC"
+	depends on PCI
+	---help---
+	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+	  PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+	bool "Lime GDC"
+	depends on OF && PPC
+	select FB_FOREIGN_ENDIAN
+	select FB_LITTLE_ENDIAN
+	---help---
+	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+endchoice
+
+config FB_MB862XX_I2C
+	bool "Support I2C bus on MB862XX GDC"
+	depends on FB_MB862XX && I2C
+	default y
+	help
+	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
+	  driver to support accessing I2C devices on controller's I2C bus.
+	  These are usually some video decoder chips.
+
+config FB_EP93XX
+	tristate "EP93XX frame buffer support"
+	depends on FB && ARCH_EP93XX
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for the Cirrus Logic EP93XX series of processors.
+	  This driver is also available as a module. The module will be called
+	  ep93xx-fb.
+
+config FB_PRE_INIT_FB
+	bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+	depends on FB && FB_MB862XX_LIME
+	---help---
+	  Select this option if display contents should be inherited as set by
+	  the bootloader.
+
+config FB_MSM
+	tristate "MSM Framebuffer support"
+	depends on FB && ARCH_MSM
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+
+config FB_MX3
+	tristate "MX3 Framebuffer support"
+	depends on FB && MX3_IPU
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	default y
+	help
+	  This is a framebuffer device for the i.MX31 LCD Controller. So
+	  far only synchronous displays are supported. If you plan to use
+	  an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  This driver implements support for the E-Ink Broadsheet
+	  controller. The release name for this device was Epson S1D13521
+	  and could also have been called by other names when coupled with
+	  a bridge adapter.
+
+config FB_AUO_K190X
+	tristate "AUO-K190X EPD controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  Provides support for epaper controllers from the K190X series
+	  of AUO. These controllers can be used to drive epaper displays
+	  from Sipix.
+
+	  This option enables the common support, shared by the individual
+	  controller drivers. You will also have to enable the driver
+	  for the controller type used in your device.
+
+config FB_AUO_K1900
+	tristate "AUO-K1900 EPD controller support"
+	depends on FB && FB_AUO_K190X
+	help
+	  This driver implements support for the AUO K1900 epd-controller.
+	  This controller can drive Sipix epaper displays but can only do
+	  serial updates, reducing the number of possible frames per second.
+
+config FB_AUO_K1901
+	tristate "AUO-K1901 EPD controller support"
+	depends on FB && FB_AUO_K190X
+	help
+	  This driver implements support for the AUO K1901 epd-controller.
+	  This controller can drive Sipix epaper displays and supports
+	  concurrent updates, making higher frames per second possible.
+
+config FB_JZ4740
+	tristate "JZ4740 LCD framebuffer support"
+	depends on FB && MACH_JZ4740
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	help
+	  Framebuffer support for the JZ4740 SoC.
+
+config FB_MXS
+	tristate "MXS LCD framebuffer support"
+	depends on FB && ARCH_MXS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  Framebuffer support for the MXS SoC.
+
+config FB_PUV3_UNIGFX
+	tristate "PKUnity v3 Unigfx framebuffer support"
+	depends on FB && UNICORE32 && ARCH_PUV3
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  Choose this option if you want to use the Unigfx device as a
+	  framebuffer device. Without the support of PCI & AGP.
+
+config FB_HYPERV
+	tristate "Microsoft Hyper-V Synthetic Video support"
+	depends on FB && HYPERV
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
+
+config FB_SIMPLE
+	bool "Simple framebuffer support"
+	depends on (FB = y)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y if you want support for a simple frame-buffer.
+
+	  This driver assumes that the display hardware has been initialized
+	  before the kernel boots, and the kernel will simply render to the
+	  pre-allocated frame buffer surface.
+
+	  Configuration re: surface address, size, and format must be provided
+	  through device tree, or plain old platform data.
+
+source "drivers/video/fbdev/omap/Kconfig"
+source "drivers/video/fbdev/omap2/Kconfig"
+source "drivers/video/fbdev/exynos/Kconfig"
+source "drivers/video/fbdev/mmp/Kconfig"
+
+config FB_SH_MOBILE_MERAM
+	tristate "SuperH Mobile MERAM read ahead support"
+	depends on (SUPERH || ARCH_SHMOBILE)
+	select GENERIC_ALLOCATOR
+	---help---
+	  Enable MERAM support for the SuperH controller.
+
+	  This will allow for caching of the framebuffer to provide more
+	  reliable access under heavy main memory bus traffic situations.
+	  Up to 4 memory channels can be configured, allowing 4 RGB or
+	  2 YCbCr framebuffers to be configured.
+
+config FB_SSD1307
+	tristate "Solomon SSD1307 framebuffer support"
+	depends on FB && I2C
+	depends on OF
+	depends on GPIOLIB
+	select FB_SYS_FOPS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_DEFERRED_IO
+	select PWM
+	help
+	  This driver implements support for the Solomon SSD1307
+	  OLED controller over I2C.
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
new file mode 100644
index 000000000000..0284f2a12538
--- /dev/null
+++ b/drivers/video/fbdev/Makefile
@@ -0,0 +1,152 @@
+# Makefile for the Linux video drivers.
+# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
+# Rewritten to use lists instead of if-statements.
+
+# Each configuration option enables a list of files.
+
+obj-y				+= core/
+
+obj-$(CONFIG_EXYNOS_VIDEO)     += exynos/
+
+obj-$(CONFIG_FB_MACMODES)      += macmodes.o
+obj-$(CONFIG_FB_WMT_GE_ROPS)   += wmt_ge_rops.o
+
+# Hardware specific drivers go first
+obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
+obj-$(CONFIG_FB_ARC)              += arcfb.o
+obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
+obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
+obj-$(CONFIG_FB_GRVGA)            += grvga.o
+obj-$(CONFIG_FB_PM2)              += pm2fb.o
+obj-$(CONFIG_FB_PM3)		  += pm3fb.o
+
+obj-$(CONFIG_FB_I740)		  += i740fb.o
+obj-$(CONFIG_FB_MATROX)		  += matrox/
+obj-$(CONFIG_FB_RIVA)		  += riva/
+obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
+obj-$(CONFIG_FB_ATY)		  += aty/ macmodes.o
+obj-$(CONFIG_FB_ATY128)		  += aty/ macmodes.o
+obj-$(CONFIG_FB_RADEON)		  += aty/
+obj-$(CONFIG_FB_SIS)		  += sis/
+obj-$(CONFIG_FB_VIA)		  += via/
+obj-$(CONFIG_FB_KYRO)             += kyro/
+obj-$(CONFIG_FB_SAVAGE)		  += savage/
+obj-$(CONFIG_FB_GEODE)		  += geode/
+obj-$(CONFIG_FB_MBX)		  += mbx/
+obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o
+obj-$(CONFIG_FB_3DFX)             += tdfxfb.o
+obj-$(CONFIG_FB_CONTROL)          += controlfb.o
+obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
+obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
+obj-$(CONFIG_FB_CT65550)          += chipsfb.o
+obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
+obj-$(CONFIG_FB_FM2)              += fm2fb.o
+obj-$(CONFIG_FB_VT8623)           += vt8623fb.o
+obj-$(CONFIG_FB_TRIDENT)          += tridentfb.o
+obj-$(CONFIG_FB_LE80578)          += vermilion/
+obj-$(CONFIG_FB_S3)               += s3fb.o
+obj-$(CONFIG_FB_ARK)              += arkfb.o
+obj-$(CONFIG_FB_STI)              += stifb.o
+obj-$(CONFIG_FB_FFB)              += ffb.o sbuslib.o
+obj-$(CONFIG_FB_CG6)              += cg6.o sbuslib.o
+obj-$(CONFIG_FB_CG3)              += cg3.o sbuslib.o
+obj-$(CONFIG_FB_BW2)              += bw2.o sbuslib.o
+obj-$(CONFIG_FB_CG14)             += cg14.o sbuslib.o
+obj-$(CONFIG_FB_P9100)            += p9100.o sbuslib.o
+obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
+obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
+obj-$(CONFIG_FB_ACORN)            += acornfb.o
+obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
+                                     atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
+obj-$(CONFIG_FB_MAC)              += macfb.o
+obj-$(CONFIG_FB_HECUBA)           += hecubafb.o
+obj-$(CONFIG_FB_N411)             += n411.o
+obj-$(CONFIG_FB_HGA)              += hgafb.o
+obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
+obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
+obj-$(CONFIG_FB_XVR1000)          += sunxvr1000.o
+obj-$(CONFIG_FB_IGA)              += igafb.o
+obj-$(CONFIG_FB_APOLLO)           += dnfb.o
+obj-$(CONFIG_FB_Q40)              += q40fb.o
+obj-$(CONFIG_FB_TGA)              += tgafb.o
+obj-$(CONFIG_FB_HP300)            += hpfb.o
+obj-$(CONFIG_FB_G364)             += g364fb.o
+obj-$(CONFIG_FB_EP93XX)		  += ep93xx-fb.o
+obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
+obj-$(CONFIG_FB_HIT)              += hitfb.o
+obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
+obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
+obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
+obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
+obj-$(CONFIG_FB_68328)            += 68328fb.o
+obj-$(CONFIG_FB_GBE)              += gbefb.o
+obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
+obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
+obj-$(CONFIG_FB_PXA)		  += pxafb.o
+obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
+obj-$(CONFIG_PXA3XX_GCU)	  += pxa3xx-gcu.o
+obj-$(CONFIG_MMP_DISP)           += mmp/
+obj-$(CONFIG_FB_W100)		  += w100fb.o
+obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
+obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
+obj-$(CONFIG_FB_AU1200)		  += au1200fb.o
+obj-$(CONFIG_FB_VT8500)		  += vt8500lcdfb.o
+obj-$(CONFIG_FB_WM8505)		  += wm8505fb.o
+obj-$(CONFIG_FB_PMAG_AA)	  += pmag-aa-fb.o
+obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
+obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
+obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
+obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
+obj-$(CONFIG_FB_BROADSHEET)       += broadsheetfb.o
+obj-$(CONFIG_FB_AUO_K190X)	  += auo_k190x.o
+obj-$(CONFIG_FB_AUO_K1900)	  += auo_k1900fb.o
+obj-$(CONFIG_FB_AUO_K1901)	  += auo_k1901fb.o
+obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
+obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
+obj-$(CONFIG_FB_IMX)              += imxfb.o
+obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
+obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
+obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
+obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
+obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
+obj-$(CONFIG_FB_PS3)		  += ps3fb.o
+obj-$(CONFIG_FB_SM501)            += sm501fb.o
+obj-$(CONFIG_FB_UDL)		  += udlfb.o
+obj-$(CONFIG_FB_SMSCUFX)	  += smscufx.o
+obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
+obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
+obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
+obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
+obj-$(CONFIG_FB_OMAP)             += omap/
+obj-y                             += omap2/
+obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
+obj-$(CONFIG_FB_CARMINE)          += carminefb.o
+obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
+obj-$(CONFIG_FB_MSM)              += msm/
+obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
+obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
+obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
+obj-$(CONFIG_FB_HYPERV)		  += hyperv_fb.o
+obj-$(CONFIG_FB_OPENCORES)	  += ocfb.o
+
+# Platform or fallback drivers go here
+obj-$(CONFIG_FB_UVESA)            += uvesafb.o
+obj-$(CONFIG_FB_VESA)             += vesafb.o
+obj-$(CONFIG_FB_EFI)              += efifb.o
+obj-$(CONFIG_FB_VGA16)            += vga16fb.o
+obj-$(CONFIG_FB_OF)               += offb.o
+obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
+obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
+obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
+obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
+obj-$(CONFIG_FB_MX3)		  += mx3fb.o
+obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
+obj-$(CONFIG_FB_MXS)		  += mxsfb.o
+obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
+obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
+
+# the test framebuffer is last
+obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/fbdev/acornfb.c
index a305caea58ee..a305caea58ee 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/fbdev/acornfb.c
diff --git a/drivers/video/acornfb.h b/drivers/video/fbdev/acornfb.h
index 175c8ff3367c..175c8ff3367c 100644
--- a/drivers/video/acornfb.h
+++ b/drivers/video/fbdev/acornfb.h
diff --git a/drivers/video/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index 14d6b3793e0a..14d6b3793e0a 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
diff --git a/drivers/video/amifb.c b/drivers/video/fbdev/amifb.c
index 518f790ef88a..518f790ef88a 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/fbdev/amifb.c
diff --git a/drivers/video/arcfb.c b/drivers/video/fbdev/arcfb.c
index 1b0b233b8b39..1b0b233b8b39 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/fbdev/arcfb.c
diff --git a/drivers/video/arkfb.c b/drivers/video/fbdev/arkfb.c
index adc4ea2cc5a0..adc4ea2cc5a0 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/fbdev/arkfb.c
diff --git a/drivers/video/asiliantfb.c b/drivers/video/fbdev/asiliantfb.c
index 7e8ddf00ccc2..7e8ddf00ccc2 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/fbdev/asiliantfb.c
diff --git a/drivers/video/atafb.c b/drivers/video/fbdev/atafb.c
index e21d1f58554c..e21d1f58554c 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/fbdev/atafb.c
diff --git a/drivers/video/atafb.h b/drivers/video/fbdev/atafb.h
index 014e05906cb1..014e05906cb1 100644
--- a/drivers/video/atafb.h
+++ b/drivers/video/fbdev/atafb.h
diff --git a/drivers/video/atafb_iplan2p2.c b/drivers/video/fbdev/atafb_iplan2p2.c
index 8cc9c50379d0..8cc9c50379d0 100644
--- a/drivers/video/atafb_iplan2p2.c
+++ b/drivers/video/fbdev/atafb_iplan2p2.c
diff --git a/drivers/video/atafb_iplan2p4.c b/drivers/video/fbdev/atafb_iplan2p4.c
index bee0d89463f7..bee0d89463f7 100644
--- a/drivers/video/atafb_iplan2p4.c
+++ b/drivers/video/fbdev/atafb_iplan2p4.c
diff --git a/drivers/video/atafb_iplan2p8.c b/drivers/video/fbdev/atafb_iplan2p8.c
index 356fb52ce443..356fb52ce443 100644
--- a/drivers/video/atafb_iplan2p8.c
+++ b/drivers/video/fbdev/atafb_iplan2p8.c
diff --git a/drivers/video/atafb_mfb.c b/drivers/video/fbdev/atafb_mfb.c
index 6a352d62eecf..6a352d62eecf 100644
--- a/drivers/video/atafb_mfb.c
+++ b/drivers/video/fbdev/atafb_mfb.c
diff --git a/drivers/video/atafb_utils.h b/drivers/video/fbdev/atafb_utils.h
index ac9e19dc5057..ac9e19dc5057 100644
--- a/drivers/video/atafb_utils.h
+++ b/drivers/video/fbdev/atafb_utils.h
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index e683b6ef9594..e683b6ef9594 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
diff --git a/drivers/video/aty/Makefile b/drivers/video/fbdev/aty/Makefile
index a6cc0e9ec790..a6cc0e9ec790 100644
--- a/drivers/video/aty/Makefile
+++ b/drivers/video/fbdev/aty/Makefile
diff --git a/drivers/video/aty/ati_ids.h b/drivers/video/fbdev/aty/ati_ids.h
index 3e9d28bcd9f8..3e9d28bcd9f8 100644
--- a/drivers/video/aty/ati_ids.h
+++ b/drivers/video/fbdev/aty/ati_ids.h
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c
index 52108be69e77..52108be69e77 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/fbdev/aty/aty128fb.c
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/fbdev/aty/atyfb.h
index 1f39a62f899b..1f39a62f899b 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/fbdev/aty/atyfb.h
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index c3d0074a32db..c3d0074a32db 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/fbdev/aty/mach64_accel.c
index 182bd680141f..182bd680141f 100644
--- a/drivers/video/aty/mach64_accel.c
+++ b/drivers/video/fbdev/aty/mach64_accel.c
diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/fbdev/aty/mach64_ct.c
index 51f29d627ceb..51f29d627ceb 100644
--- a/drivers/video/aty/mach64_ct.c
+++ b/drivers/video/fbdev/aty/mach64_ct.c
diff --git a/drivers/video/aty/mach64_cursor.c b/drivers/video/fbdev/aty/mach64_cursor.c
index 0fe02e22d9a4..2fa0317ab3c7 100644
--- a/drivers/video/aty/mach64_cursor.c
+++ b/drivers/video/fbdev/aty/mach64_cursor.c
@@ -5,7 +5,7 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include "../fb_draw.h"
+#include "../core/fb_draw.h"
 
 #include <asm/io.h>
 
diff --git a/drivers/video/aty/mach64_gx.c b/drivers/video/fbdev/aty/mach64_gx.c
index 10c988aef58e..10c988aef58e 100644
--- a/drivers/video/aty/mach64_gx.c
+++ b/drivers/video/fbdev/aty/mach64_gx.c
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/fbdev/aty/radeon_accel.c
index a469a3d6edcb..a469a3d6edcb 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/fbdev/aty/radeon_accel.c
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/fbdev/aty/radeon_backlight.c
index db572df7e1ef..db572df7e1ef 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/fbdev/aty/radeon_backlight.c
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
index 26d80a4486fb..26d80a4486fb 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/fbdev/aty/radeon_base.c
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/fbdev/aty/radeon_i2c.c
index ab1d0fd76316..ab1d0fd76316 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/fbdev/aty/radeon_i2c.c
diff --git a/drivers/video/aty/radeon_monitor.c b/drivers/video/fbdev/aty/radeon_monitor.c
index bc078d50d8f1..bc078d50d8f1 100644
--- a/drivers/video/aty/radeon_monitor.c
+++ b/drivers/video/fbdev/aty/radeon_monitor.c
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/fbdev/aty/radeon_pm.c
index 46a12f1a93c3..46a12f1a93c3 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/fbdev/aty/radeon_pm.c
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/fbdev/aty/radeonfb.h
index cb846044f57c..cb846044f57c 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/fbdev/aty/radeonfb.h
diff --git a/drivers/video/au1100fb.c b/drivers/video/fbdev/au1100fb.c
index 372d4aea9d1c..372d4aea9d1c 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/fbdev/au1100fb.c
diff --git a/drivers/video/au1100fb.h b/drivers/video/fbdev/au1100fb.h
index 12d9642d5465..12d9642d5465 100644
--- a/drivers/video/au1100fb.h
+++ b/drivers/video/fbdev/au1100fb.h
diff --git a/drivers/video/au1200fb.c b/drivers/video/fbdev/au1200fb.c
index 4cfba78a1458..4cfba78a1458 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
diff --git a/drivers/video/au1200fb.h b/drivers/video/fbdev/au1200fb.h
index e2672714d8d4..e2672714d8d4 100644
--- a/drivers/video/au1200fb.h
+++ b/drivers/video/fbdev/au1200fb.h
diff --git a/drivers/video/auo_k1900fb.c b/drivers/video/fbdev/auo_k1900fb.c
index f5b668e77af3..f5b668e77af3 100644
--- a/drivers/video/auo_k1900fb.c
+++ b/drivers/video/fbdev/auo_k1900fb.c
diff --git a/drivers/video/auo_k1901fb.c b/drivers/video/fbdev/auo_k1901fb.c
index 12b9adcb75c5..12b9adcb75c5 100644
--- a/drivers/video/auo_k1901fb.c
+++ b/drivers/video/fbdev/auo_k1901fb.c
diff --git a/drivers/video/auo_k190x.c b/drivers/video/fbdev/auo_k190x.c
index 8d2499d1cafb..8d2499d1cafb 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/fbdev/auo_k190x.c
diff --git a/drivers/video/auo_k190x.h b/drivers/video/fbdev/auo_k190x.h
index e35af1f51b28..e35af1f51b28 100644
--- a/drivers/video/auo_k190x.h
+++ b/drivers/video/fbdev/auo_k190x.h
diff --git a/drivers/video/bf537-lq035.c b/drivers/video/fbdev/bf537-lq035.c
index a82d2578d976..a82d2578d976 100644
--- a/drivers/video/bf537-lq035.c
+++ b/drivers/video/fbdev/bf537-lq035.c
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/fbdev/bf54x-lq043fb.c
index 42b8f9d11018..e2c42ad8515a 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/fbdev/bf54x-lq043fb.c
@@ -49,13 +49,13 @@
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <asm/blackfin.h>
 #include <asm/irq.h>
 #include <asm/dpmc.h>
 #include <asm/dma-mapping.h>
 #include <asm/dma.h>
-#include <asm/gpio.h>
 #include <asm/portmux.h>
 
 #include <mach/bf54x-lq043.h>
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/fbdev/bfin-lq035q1-fb.c
index b594a58ff21d..b594a58ff21d 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/fbdev/bfin-lq035q1-fb.c
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/fbdev/bfin-t350mcqb-fb.c
index b5cf1307a3d9..b5cf1307a3d9 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/fbdev/bfin-t350mcqb-fb.c
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/fbdev/bfin_adv7393fb.c
index a54f7f7d763b..a54f7f7d763b 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/fbdev/bfin_adv7393fb.c
diff --git a/drivers/video/bfin_adv7393fb.h b/drivers/video/fbdev/bfin_adv7393fb.h
index cd591b5152a5..cd591b5152a5 100644
--- a/drivers/video/bfin_adv7393fb.h
+++ b/drivers/video/fbdev/bfin_adv7393fb.h
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/fbdev/broadsheetfb.c
index 8556264b16b7..8556264b16b7 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/fbdev/broadsheetfb.c
diff --git a/drivers/video/bt431.h b/drivers/video/fbdev/bt431.h
index 04e0cfbba538..04e0cfbba538 100644
--- a/drivers/video/bt431.h
+++ b/drivers/video/fbdev/bt431.h
diff --git a/drivers/video/bt455.h b/drivers/video/fbdev/bt455.h
index 80f61b03e9ae..80f61b03e9ae 100644
--- a/drivers/video/bt455.h
+++ b/drivers/video/fbdev/bt455.h
diff --git a/drivers/video/bw2.c b/drivers/video/fbdev/bw2.c
index bc123d6947a4..bc123d6947a4 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/fbdev/bw2.c
diff --git a/drivers/video/c2p.h b/drivers/video/fbdev/c2p.h
index 6c38d40427d8..6c38d40427d8 100644
--- a/drivers/video/c2p.h
+++ b/drivers/video/fbdev/c2p.h
diff --git a/drivers/video/c2p_core.h b/drivers/video/fbdev/c2p_core.h
index e1035a865fb9..e1035a865fb9 100644
--- a/drivers/video/c2p_core.h
+++ b/drivers/video/fbdev/c2p_core.h
diff --git a/drivers/video/c2p_iplan2.c b/drivers/video/fbdev/c2p_iplan2.c
index 19156dc6158c..19156dc6158c 100644
--- a/drivers/video/c2p_iplan2.c
+++ b/drivers/video/fbdev/c2p_iplan2.c
diff --git a/drivers/video/c2p_planar.c b/drivers/video/fbdev/c2p_planar.c
index ec7ac8526f06..ec7ac8526f06 100644
--- a/drivers/video/c2p_planar.c
+++ b/drivers/video/fbdev/c2p_planar.c
diff --git a/drivers/video/carminefb.c b/drivers/video/fbdev/carminefb.c
index 65f7c15f5fdb..65f7c15f5fdb 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/fbdev/carminefb.c
diff --git a/drivers/video/carminefb.h b/drivers/video/fbdev/carminefb.h
index 05306de0c6b6..05306de0c6b6 100644
--- a/drivers/video/carminefb.h
+++ b/drivers/video/fbdev/carminefb.h
diff --git a/drivers/video/carminefb_regs.h b/drivers/video/fbdev/carminefb_regs.h
index 045215600b73..045215600b73 100644
--- a/drivers/video/carminefb_regs.h
+++ b/drivers/video/fbdev/carminefb_regs.h
diff --git a/drivers/video/cg14.c b/drivers/video/fbdev/cg14.c
index c79745b136bb..c79745b136bb 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/fbdev/cg14.c
diff --git a/drivers/video/cg3.c b/drivers/video/fbdev/cg3.c
index 64a89d5747ed..64a89d5747ed 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/fbdev/cg3.c
diff --git a/drivers/video/cg6.c b/drivers/video/fbdev/cg6.c
index 70781fea092a..70781fea092a 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/fbdev/cg6.c
diff --git a/drivers/video/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 206a66b61072..206a66b61072 100644
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
diff --git a/drivers/video/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
index d992aa5eb3f0..d992aa5eb3f0 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/fbdev/cirrusfb.c
diff --git a/drivers/video/clps711xfb.c b/drivers/video/fbdev/clps711xfb.c
index f00980607b8f..f00980607b8f 100644
--- a/drivers/video/clps711xfb.c
+++ b/drivers/video/fbdev/clps711xfb.c
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/fbdev/cobalt_lcdfb.c
index d5533f4db1cf..d5533f4db1cf 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/fbdev/cobalt_lcdfb.c
diff --git a/drivers/video/controlfb.c b/drivers/video/fbdev/controlfb.c
index fdadef979238..fdadef979238 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
diff --git a/drivers/video/controlfb.h b/drivers/video/fbdev/controlfb.h
index 6026c60fc100..6026c60fc100 100644
--- a/drivers/video/controlfb.h
+++ b/drivers/video/fbdev/controlfb.h
diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
new file mode 100644
index 000000000000..fa306538dac2
--- /dev/null
+++ b/drivers/video/fbdev/core/Makefile
@@ -0,0 +1,16 @@
+obj-y                             += fb_notify.o
+obj-$(CONFIG_FB)                  += fb.o
+fb-y                              := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
+                                     modedb.o fbcvt.o
+fb-objs                           := $(fb-y)
+
+obj-$(CONFIG_FB_CFB_FILLRECT)  += cfbfillrect.o
+obj-$(CONFIG_FB_CFB_COPYAREA)  += cfbcopyarea.o
+obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
+obj-$(CONFIG_FB_SYS_FILLRECT)  += sysfillrect.o
+obj-$(CONFIG_FB_SYS_COPYAREA)  += syscopyarea.o
+obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
+obj-$(CONFIG_FB_SYS_FOPS)      += fb_sys_fops.o
+obj-$(CONFIG_FB_SVGALIB)       += svgalib.o
+obj-$(CONFIG_FB_DDC)           += fb_ddc.o
+obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
diff --git a/drivers/video/cfbcopyarea.c b/drivers/video/fbdev/core/cfbcopyarea.c
index bcb57235fcc7..bcb57235fcc7 100644
--- a/drivers/video/cfbcopyarea.c
+++ b/drivers/video/fbdev/core/cfbcopyarea.c
diff --git a/drivers/video/cfbfillrect.c b/drivers/video/fbdev/core/cfbfillrect.c
index ba9f58b2a5e8..ba9f58b2a5e8 100644
--- a/drivers/video/cfbfillrect.c
+++ b/drivers/video/fbdev/core/cfbfillrect.c
diff --git a/drivers/video/cfbimgblt.c b/drivers/video/fbdev/core/cfbimgblt.c
index a2bb276a8b24..a2bb276a8b24 100644
--- a/drivers/video/cfbimgblt.c
+++ b/drivers/video/fbdev/core/cfbimgblt.c
diff --git a/drivers/video/fb_ddc.c b/drivers/video/fbdev/core/fb_ddc.c
index 2b106f046fde..94322ccfedde 100644
--- a/drivers/video/fb_ddc.c
+++ b/drivers/video/fbdev/core/fb_ddc.c
@@ -15,7 +15,7 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/slab.h>
 
-#include "edid.h"
+#include "../edid.h"
 
 #define DDC_ADDR	0x50
 
diff --git a/drivers/video/fb_defio.c b/drivers/video/fbdev/core/fb_defio.c
index 900aa4ecd617..900aa4ecd617 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fbdev/core/fb_defio.c
diff --git a/drivers/video/fb_draw.h b/drivers/video/fbdev/core/fb_draw.h
index 624ee115f129..624ee115f129 100644
--- a/drivers/video/fb_draw.h
+++ b/drivers/video/fbdev/core/fb_draw.h
diff --git a/drivers/video/fb_notify.c b/drivers/video/fbdev/core/fb_notify.c
index 74c2da528884..74c2da528884 100644
--- a/drivers/video/fb_notify.c
+++ b/drivers/video/fbdev/core/fb_notify.c
diff --git a/drivers/video/fb_sys_fops.c b/drivers/video/fbdev/core/fb_sys_fops.c
index ff275d7f3eaf..ff275d7f3eaf 100644
--- a/drivers/video/fb_sys_fops.c
+++ b/drivers/video/fbdev/core/fb_sys_fops.c
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbdev/core/fbcmap.c
index f89245b8ba8e..f89245b8ba8e 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbdev/core/fbcmap.c
diff --git a/drivers/video/fbcvt.c b/drivers/video/fbdev/core/fbcvt.c
index 7cb715dfc0e1..7cb715dfc0e1 100644
--- a/drivers/video/fbcvt.c
+++ b/drivers/video/fbdev/core/fbcvt.c
diff --git a/drivers/video/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index b6d5008f361f..b6d5008f361f 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
diff --git a/drivers/video/fbmon.c b/drivers/video/fbdev/core/fbmon.c
index 6103fa6fb54f..c204ebe6187e 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbdev/core/fbmon.c
@@ -37,7 +37,7 @@
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 #endif
-#include "edid.h"
+#include "../edid.h"
 
 /*
  * EDID parser
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbdev/core/fbsysfs.c
index 53444ac19fe0..53444ac19fe0 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbdev/core/fbsysfs.c
diff --git a/drivers/video/modedb.c b/drivers/video/fbdev/core/modedb.c
index a9a907c440d7..a9a907c440d7 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/fbdev/core/modedb.c
diff --git a/drivers/video/svgalib.c b/drivers/video/fbdev/core/svgalib.c
index 9e01322fabe3..9e01322fabe3 100644
--- a/drivers/video/svgalib.c
+++ b/drivers/video/fbdev/core/svgalib.c
diff --git a/drivers/video/syscopyarea.c b/drivers/video/fbdev/core/syscopyarea.c
index 844a32fd38ed..844a32fd38ed 100644
--- a/drivers/video/syscopyarea.c
+++ b/drivers/video/fbdev/core/syscopyarea.c
diff --git a/drivers/video/sysfillrect.c b/drivers/video/fbdev/core/sysfillrect.c
index 33ee3d34f9d2..33ee3d34f9d2 100644
--- a/drivers/video/sysfillrect.c
+++ b/drivers/video/fbdev/core/sysfillrect.c
diff --git a/drivers/video/sysimgblt.c b/drivers/video/fbdev/core/sysimgblt.c
index a4d05b1b17d7..a4d05b1b17d7 100644
--- a/drivers/video/sysimgblt.c
+++ b/drivers/video/fbdev/core/sysimgblt.c
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/fbdev/cyber2000fb.c
index b0a950f36970..b0a950f36970 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/fbdev/cyber2000fb.c
diff --git a/drivers/video/cyber2000fb.h b/drivers/video/fbdev/cyber2000fb.h
index bad69102e774..bad69102e774 100644
--- a/drivers/video/cyber2000fb.h
+++ b/drivers/video/fbdev/cyber2000fb.h
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
index 0c0ba920ea48..6b23508ff0a5 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/fbdev/da8xx-fb.c
@@ -663,15 +663,7 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			(green << info->var.green.offset) |
 			(blue << info->var.blue.offset);
 
-		switch (info->var.bits_per_pixel) {
-		case 16:
-			((u16 *) (info->pseudo_palette))[regno] = v;
-			break;
-		case 24:
-		case 32:
-			((u32 *) (info->pseudo_palette))[regno] = v;
-			break;
-		}
+		((u32 *) (info->pseudo_palette))[regno] = v;
 		if (palette[0] != 0x4000) {
 			update_hw = 1;
 			palette[0] = 0x4000;
diff --git a/drivers/video/dnfb.c b/drivers/video/fbdev/dnfb.c
index 3526899da61b..3526899da61b 100644
--- a/drivers/video/dnfb.c
+++ b/drivers/video/fbdev/dnfb.c
diff --git a/drivers/video/edid.h b/drivers/video/fbdev/edid.h
index d03a232d90b2..d03a232d90b2 100644
--- a/drivers/video/edid.h
+++ b/drivers/video/fbdev/edid.h
diff --git a/drivers/video/efifb.c b/drivers/video/fbdev/efifb.c
index ae9618ff6735..ae9618ff6735 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/fbdev/efifb.c
diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c
index 35a0f533f1a2..35a0f533f1a2 100644
--- a/drivers/video/ep93xx-fb.c
+++ b/drivers/video/fbdev/ep93xx-fb.c
diff --git a/drivers/video/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig
index fcf2d48ac6d1..fcf2d48ac6d1 100644
--- a/drivers/video/exynos/Kconfig
+++ b/drivers/video/fbdev/exynos/Kconfig
diff --git a/drivers/video/exynos/Makefile b/drivers/video/fbdev/exynos/Makefile
index b5b1bd228abb..b5b1bd228abb 100644
--- a/drivers/video/exynos/Makefile
+++ b/drivers/video/fbdev/exynos/Makefile
diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
index cee9602f9a7b..cee9602f9a7b 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
index 85edabfdef5a..85edabfdef5a 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_common.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h
index 412552274df3..412552274df3 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_common.h
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c
index c148d06540c1..c148d06540c1 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h
index 85460701c7ea..85460701c7ea 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h
diff --git a/drivers/video/exynos/exynos_mipi_dsi_regs.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h
index 4227106d3fd0..4227106d3fd0 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_regs.h
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h
diff --git a/drivers/video/exynos/s6e8ax0.c b/drivers/video/fbdev/exynos/s6e8ax0.c
index 29e70ed3f154..29e70ed3f154 100644
--- a/drivers/video/exynos/s6e8ax0.c
+++ b/drivers/video/fbdev/exynos/s6e8ax0.c
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fbdev/fb-puv3.c
index 6db9ebd042a3..6db9ebd042a3 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fbdev/fb-puv3.c
diff --git a/drivers/video/ffb.c b/drivers/video/fbdev/ffb.c
index 4c4ffa61ae26..4c4ffa61ae26 100644
--- a/drivers/video/ffb.c
+++ b/drivers/video/fbdev/ffb.c
diff --git a/drivers/video/fm2fb.c b/drivers/video/fbdev/fm2fb.c
index e69d47af9932..e69d47af9932 100644
--- a/drivers/video/fm2fb.c
+++ b/drivers/video/fbdev/fm2fb.c
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c
index e8758b9c3bcc..e8758b9c3bcc 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fbdev/fsl-diu-fb.c
diff --git a/drivers/video/g364fb.c b/drivers/video/fbdev/g364fb.c
index 223896cc5f7d..223896cc5f7d 100644
--- a/drivers/video/g364fb.c
+++ b/drivers/video/fbdev/g364fb.c
diff --git a/drivers/video/gbefb.c b/drivers/video/fbdev/gbefb.c
index 3ec65a878ac8..3ec65a878ac8 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/fbdev/gbefb.c
diff --git a/drivers/video/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig
index 1e8555284786..1e8555284786 100644
--- a/drivers/video/geode/Kconfig
+++ b/drivers/video/fbdev/geode/Kconfig
diff --git a/drivers/video/geode/Makefile b/drivers/video/fbdev/geode/Makefile
index 5c98da126883..5c98da126883 100644
--- a/drivers/video/geode/Makefile
+++ b/drivers/video/fbdev/geode/Makefile
diff --git a/drivers/video/geode/display_gx.c b/drivers/video/fbdev/geode/display_gx.c
index f0af911a096d..f0af911a096d 100644
--- a/drivers/video/geode/display_gx.c
+++ b/drivers/video/fbdev/geode/display_gx.c
diff --git a/drivers/video/geode/display_gx1.c b/drivers/video/fbdev/geode/display_gx1.c
index 926d53eeb549..926d53eeb549 100644
--- a/drivers/video/geode/display_gx1.c
+++ b/drivers/video/fbdev/geode/display_gx1.c
diff --git a/drivers/video/geode/display_gx1.h b/drivers/video/fbdev/geode/display_gx1.h
index 671c05558c79..671c05558c79 100644
--- a/drivers/video/geode/display_gx1.h
+++ b/drivers/video/fbdev/geode/display_gx1.h
diff --git a/drivers/video/geode/geodefb.h b/drivers/video/fbdev/geode/geodefb.h
index ae04820e0c57..ae04820e0c57 100644
--- a/drivers/video/geode/geodefb.h
+++ b/drivers/video/fbdev/geode/geodefb.h
diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/fbdev/geode/gx1fb_core.c
index 2794ba11f332..2794ba11f332 100644
--- a/drivers/video/geode/gx1fb_core.c
+++ b/drivers/video/fbdev/geode/gx1fb_core.c
diff --git a/drivers/video/geode/gxfb.h b/drivers/video/fbdev/geode/gxfb.h
index d19e9378b0c0..d19e9378b0c0 100644
--- a/drivers/video/geode/gxfb.h
+++ b/drivers/video/fbdev/geode/gxfb.h
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/fbdev/geode/gxfb_core.c
index 1790f14bab15..1790f14bab15 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/fbdev/geode/gxfb_core.c
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/fbdev/geode/lxfb.h
index cfcd8090f313..cfcd8090f313 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/fbdev/geode/lxfb.h
diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/fbdev/geode/lxfb_core.c
index 9e1d19d673a1..9e1d19d673a1 100644
--- a/drivers/video/geode/lxfb_core.c
+++ b/drivers/video/fbdev/geode/lxfb_core.c
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/fbdev/geode/lxfb_ops.c
index 79e9abc72b83..79e9abc72b83 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/fbdev/geode/lxfb_ops.c
diff --git a/drivers/video/geode/suspend_gx.c b/drivers/video/fbdev/geode/suspend_gx.c
index 1bb043d70c64..1bb043d70c64 100644
--- a/drivers/video/geode/suspend_gx.c
+++ b/drivers/video/fbdev/geode/suspend_gx.c
diff --git a/drivers/video/geode/video_cs5530.c b/drivers/video/fbdev/geode/video_cs5530.c
index 649c3943d431..649c3943d431 100644
--- a/drivers/video/geode/video_cs5530.c
+++ b/drivers/video/fbdev/geode/video_cs5530.c
diff --git a/drivers/video/geode/video_cs5530.h b/drivers/video/fbdev/geode/video_cs5530.h
index 56cecca7f1ce..56cecca7f1ce 100644
--- a/drivers/video/geode/video_cs5530.h
+++ b/drivers/video/fbdev/geode/video_cs5530.h
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/fbdev/geode/video_gx.c
index 6082f653c68a..6082f653c68a 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/fbdev/geode/video_gx.c
diff --git a/drivers/video/goldfishfb.c b/drivers/video/fbdev/goldfishfb.c
index 7f6c9e6cfc6c..7f6c9e6cfc6c 100644
--- a/drivers/video/goldfishfb.c
+++ b/drivers/video/fbdev/goldfishfb.c
diff --git a/drivers/video/grvga.c b/drivers/video/fbdev/grvga.c
index c078701f15f6..c078701f15f6 100644
--- a/drivers/video/grvga.c
+++ b/drivers/video/fbdev/grvga.c
diff --git a/drivers/video/gxt4500.c b/drivers/video/fbdev/gxt4500.c
index 135d78a02588..135d78a02588 100644
--- a/drivers/video/gxt4500.c
+++ b/drivers/video/fbdev/gxt4500.c
diff --git a/drivers/video/hecubafb.c b/drivers/video/fbdev/hecubafb.c
index f64120ec9192..f64120ec9192 100644
--- a/drivers/video/hecubafb.c
+++ b/drivers/video/fbdev/hecubafb.c
diff --git a/drivers/video/hgafb.c b/drivers/video/fbdev/hgafb.c
index 5ff9fe2116a4..5ff9fe2116a4 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
diff --git a/drivers/video/hitfb.c b/drivers/video/fbdev/hitfb.c
index a648d5186c6e..a648d5186c6e 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/fbdev/hitfb.c
diff --git a/drivers/video/hpfb.c b/drivers/video/fbdev/hpfb.c
index a1b7e5fa9b09..a1b7e5fa9b09 100644
--- a/drivers/video/hpfb.c
+++ b/drivers/video/fbdev/hpfb.c
diff --git a/drivers/video/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index e23392ec5af3..e23392ec5af3 100644
--- a/drivers/video/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
diff --git a/drivers/video/i740_reg.h b/drivers/video/fbdev/i740_reg.h
index 91bac76549d7..91bac76549d7 100644
--- a/drivers/video/i740_reg.h
+++ b/drivers/video/fbdev/i740_reg.h
diff --git a/drivers/video/i740fb.c b/drivers/video/fbdev/i740fb.c
index ca7c9df193b0..ca7c9df193b0 100644
--- a/drivers/video/i740fb.c
+++ b/drivers/video/fbdev/i740fb.c
diff --git a/drivers/video/i810/Makefile b/drivers/video/fbdev/i810/Makefile
index 96e08c8ded97..96e08c8ded97 100644
--- a/drivers/video/i810/Makefile
+++ b/drivers/video/fbdev/i810/Makefile
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/fbdev/i810/i810-i2c.c
index 7db17d0d8a8c..7db17d0d8a8c 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/fbdev/i810/i810-i2c.c
diff --git a/drivers/video/i810/i810.h b/drivers/video/fbdev/i810/i810.h
index 1414b73ac55b..1414b73ac55b 100644
--- a/drivers/video/i810/i810.h
+++ b/drivers/video/fbdev/i810/i810.h
diff --git a/drivers/video/i810/i810_accel.c b/drivers/video/fbdev/i810/i810_accel.c
index 7672d2ea9b35..7672d2ea9b35 100644
--- a/drivers/video/i810/i810_accel.c
+++ b/drivers/video/fbdev/i810/i810_accel.c
diff --git a/drivers/video/i810/i810_dvt.c b/drivers/video/fbdev/i810/i810_dvt.c
index b4b3670667ab..b4b3670667ab 100644
--- a/drivers/video/i810/i810_dvt.c
+++ b/drivers/video/fbdev/i810/i810_dvt.c
diff --git a/drivers/video/i810/i810_gtf.c b/drivers/video/fbdev/i810/i810_gtf.c
index 9743d51e7f8c..9743d51e7f8c 100644
--- a/drivers/video/i810/i810_gtf.c
+++ b/drivers/video/fbdev/i810/i810_gtf.c
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/fbdev/i810/i810_main.c
index bb674e431741..bb674e431741 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/fbdev/i810/i810_main.c
diff --git a/drivers/video/i810/i810_main.h b/drivers/video/fbdev/i810/i810_main.h
index a25afaa534ba..a25afaa534ba 100644
--- a/drivers/video/i810/i810_main.h
+++ b/drivers/video/fbdev/i810/i810_main.h
diff --git a/drivers/video/i810/i810_regs.h b/drivers/video/fbdev/i810/i810_regs.h
index 91c6bd9d0d0d..91c6bd9d0d0d 100644
--- a/drivers/video/i810/i810_regs.h
+++ b/drivers/video/fbdev/i810/i810_regs.h
diff --git a/drivers/video/igafb.c b/drivers/video/fbdev/igafb.c
index 486f18897414..486f18897414 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/fbdev/igafb.c
diff --git a/drivers/video/imsttfb.c b/drivers/video/fbdev/imsttfb.c
index aae10ce74f14..aae10ce74f14 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/fbdev/imsttfb.c
diff --git a/drivers/video/imxfb.c b/drivers/video/fbdev/imxfb.c
index f6e621684953..f6e621684953 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/fbdev/imxfb.c
diff --git a/drivers/video/intelfb/Makefile b/drivers/video/fbdev/intelfb/Makefile
index f7d631ebee8e..f7d631ebee8e 100644
--- a/drivers/video/intelfb/Makefile
+++ b/drivers/video/fbdev/intelfb/Makefile
diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/fbdev/intelfb/intelfb.h
index 6b51175629c7..6b51175629c7 100644
--- a/drivers/video/intelfb/intelfb.h
+++ b/drivers/video/fbdev/intelfb/intelfb.h
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/fbdev/intelfb/intelfb_i2c.c
index 3300bd31d9d7..3300bd31d9d7 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/fbdev/intelfb/intelfb_i2c.c
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c
index b847d530471a..b847d530471a 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/fbdev/intelfb/intelfbdrv.c
diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c
index fbad61da359f..fbad61da359f 100644
--- a/drivers/video/intelfb/intelfbhw.c
+++ b/drivers/video/fbdev/intelfb/intelfbhw.c
diff --git a/drivers/video/intelfb/intelfbhw.h b/drivers/video/fbdev/intelfb/intelfbhw.h
index 216ca20f259f..216ca20f259f 100644
--- a/drivers/video/intelfb/intelfbhw.h
+++ b/drivers/video/fbdev/intelfb/intelfbhw.h
diff --git a/drivers/video/jz4740_fb.c b/drivers/video/fbdev/jz4740_fb.c
index 87790e9644d0..87790e9644d0 100644
--- a/drivers/video/jz4740_fb.c
+++ b/drivers/video/fbdev/jz4740_fb.c
diff --git a/drivers/video/kyro/Makefile b/drivers/video/fbdev/kyro/Makefile
index 2fd66f551bae..2fd66f551bae 100644
--- a/drivers/video/kyro/Makefile
+++ b/drivers/video/fbdev/kyro/Makefile
diff --git a/drivers/video/kyro/STG4000InitDevice.c b/drivers/video/fbdev/kyro/STG4000InitDevice.c
index 1d3f2080aa6f..1d3f2080aa6f 100644
--- a/drivers/video/kyro/STG4000InitDevice.c
+++ b/drivers/video/fbdev/kyro/STG4000InitDevice.c
diff --git a/drivers/video/kyro/STG4000Interface.h b/drivers/video/fbdev/kyro/STG4000Interface.h
index b7c83d5dfb13..b7c83d5dfb13 100644
--- a/drivers/video/kyro/STG4000Interface.h
+++ b/drivers/video/fbdev/kyro/STG4000Interface.h
diff --git a/drivers/video/kyro/STG4000OverlayDevice.c b/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
index 0aeeaa10708b..0aeeaa10708b 100644
--- a/drivers/video/kyro/STG4000OverlayDevice.c
+++ b/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
diff --git a/drivers/video/kyro/STG4000Ramdac.c b/drivers/video/fbdev/kyro/STG4000Ramdac.c
index e6ad037e4396..e6ad037e4396 100644
--- a/drivers/video/kyro/STG4000Ramdac.c
+++ b/drivers/video/fbdev/kyro/STG4000Ramdac.c
diff --git a/drivers/video/kyro/STG4000Reg.h b/drivers/video/fbdev/kyro/STG4000Reg.h
index 50f4670e9252..50f4670e9252 100644
--- a/drivers/video/kyro/STG4000Reg.h
+++ b/drivers/video/fbdev/kyro/STG4000Reg.h
diff --git a/drivers/video/kyro/STG4000VTG.c b/drivers/video/fbdev/kyro/STG4000VTG.c
index bd389709d234..bd389709d234 100644
--- a/drivers/video/kyro/STG4000VTG.c
+++ b/drivers/video/fbdev/kyro/STG4000VTG.c
diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c
index 65041e15fd59..65041e15fd59 100644
--- a/drivers/video/kyro/fbdev.c
+++ b/drivers/video/fbdev/kyro/fbdev.c
diff --git a/drivers/video/leo.c b/drivers/video/fbdev/leo.c
index 2c7f7d479fe2..2c7f7d479fe2 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/fbdev/leo.c
diff --git a/drivers/video/macfb.c b/drivers/video/fbdev/macfb.c
index cda7587cbc86..cda7587cbc86 100644
--- a/drivers/video/macfb.c
+++ b/drivers/video/fbdev/macfb.c
diff --git a/drivers/video/macmodes.c b/drivers/video/fbdev/macmodes.c
index af86c081d2be..af86c081d2be 100644
--- a/drivers/video/macmodes.c
+++ b/drivers/video/fbdev/macmodes.c
diff --git a/drivers/video/macmodes.h b/drivers/video/fbdev/macmodes.h
index b86ba08aac9e..b86ba08aac9e 100644
--- a/drivers/video/macmodes.h
+++ b/drivers/video/fbdev/macmodes.h
diff --git a/drivers/video/matrox/Makefile b/drivers/video/fbdev/matrox/Makefile
index f9c00ebe2530..f9c00ebe2530 100644
--- a/drivers/video/matrox/Makefile
+++ b/drivers/video/fbdev/matrox/Makefile
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/fbdev/matrox/g450_pll.c
index c15f8a57498e..c15f8a57498e 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/fbdev/matrox/g450_pll.c
diff --git a/drivers/video/matrox/g450_pll.h b/drivers/video/fbdev/matrox/g450_pll.h
index aac615d18440..aac615d18440 100644
--- a/drivers/video/matrox/g450_pll.h
+++ b/drivers/video/fbdev/matrox/g450_pll.h
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/fbdev/matrox/i2c-matroxfb.c
index 0fb280ead3dc..0fb280ead3dc 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/fbdev/matrox/i2c-matroxfb.c
diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/fbdev/matrox/matroxfb_DAC1064.c
index a01147fdf270..a01147fdf270 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.c
+++ b/drivers/video/fbdev/matrox/matroxfb_DAC1064.c
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/fbdev/matrox/matroxfb_DAC1064.h
index 1e6e45b57b78..1e6e45b57b78 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/fbdev/matrox/matroxfb_DAC1064.h
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/fbdev/matrox/matroxfb_Ti3026.c
index 195ad7cac1ba..195ad7cac1ba 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/fbdev/matrox/matroxfb_Ti3026.c
diff --git a/drivers/video/matrox/matroxfb_Ti3026.h b/drivers/video/fbdev/matrox/matroxfb_Ti3026.h
index 27872aaa0a17..27872aaa0a17 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.h
+++ b/drivers/video/fbdev/matrox/matroxfb_Ti3026.h
diff --git a/drivers/video/matrox/matroxfb_accel.c b/drivers/video/fbdev/matrox/matroxfb_accel.c
index 0d5cb85d071a..0d5cb85d071a 100644
--- a/drivers/video/matrox/matroxfb_accel.c
+++ b/drivers/video/fbdev/matrox/matroxfb_accel.c
diff --git a/drivers/video/matrox/matroxfb_accel.h b/drivers/video/fbdev/matrox/matroxfb_accel.h
index 1e418e62c22d..1e418e62c22d 100644
--- a/drivers/video/matrox/matroxfb_accel.h
+++ b/drivers/video/fbdev/matrox/matroxfb_accel.h
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index 7116c5309c7d..7116c5309c7d 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/fbdev/matrox/matroxfb_base.h
index 556d96ce40bf..556d96ce40bf 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/fbdev/matrox/matroxfb_base.h
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/fbdev/matrox/matroxfb_crtc2.c
index 02796a4317a9..02796a4317a9 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/fbdev/matrox/matroxfb_crtc2.c
diff --git a/drivers/video/matrox/matroxfb_crtc2.h b/drivers/video/fbdev/matrox/matroxfb_crtc2.h
index 1005582e843e..1005582e843e 100644
--- a/drivers/video/matrox/matroxfb_crtc2.h
+++ b/drivers/video/fbdev/matrox/matroxfb_crtc2.h
diff --git a/drivers/video/matrox/matroxfb_g450.c b/drivers/video/fbdev/matrox/matroxfb_g450.c
index cff0546ea6fd..cff0546ea6fd 100644
--- a/drivers/video/matrox/matroxfb_g450.c
+++ b/drivers/video/fbdev/matrox/matroxfb_g450.c
diff --git a/drivers/video/matrox/matroxfb_g450.h b/drivers/video/fbdev/matrox/matroxfb_g450.h
index 3a3e654444b8..3a3e654444b8 100644
--- a/drivers/video/matrox/matroxfb_g450.h
+++ b/drivers/video/fbdev/matrox/matroxfb_g450.h
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/fbdev/matrox/matroxfb_maven.c
index ee41a0f276b2..ee41a0f276b2 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/fbdev/matrox/matroxfb_maven.c
diff --git a/drivers/video/matrox/matroxfb_maven.h b/drivers/video/fbdev/matrox/matroxfb_maven.h
index 99eddec9f30c..99eddec9f30c 100644
--- a/drivers/video/matrox/matroxfb_maven.h
+++ b/drivers/video/fbdev/matrox/matroxfb_maven.h
diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/fbdev/matrox/matroxfb_misc.c
index 9948ca2a3046..9948ca2a3046 100644
--- a/drivers/video/matrox/matroxfb_misc.c
+++ b/drivers/video/fbdev/matrox/matroxfb_misc.c
diff --git a/drivers/video/matrox/matroxfb_misc.h b/drivers/video/fbdev/matrox/matroxfb_misc.h
index 351c823f1f74..351c823f1f74 100644
--- a/drivers/video/matrox/matroxfb_misc.h
+++ b/drivers/video/fbdev/matrox/matroxfb_misc.h
diff --git a/drivers/video/maxinefb.c b/drivers/video/fbdev/maxinefb.c
index 5cf52d3c8e75..5cf52d3c8e75 100644
--- a/drivers/video/maxinefb.c
+++ b/drivers/video/fbdev/maxinefb.c
diff --git a/drivers/video/mb862xx/Makefile b/drivers/video/fbdev/mb862xx/Makefile
index 5707ed0e31a7..5707ed0e31a7 100644
--- a/drivers/video/mb862xx/Makefile
+++ b/drivers/video/fbdev/mb862xx/Makefile
diff --git a/drivers/video/mb862xx/mb862xx-i2c.c b/drivers/video/fbdev/mb862xx/mb862xx-i2c.c
index c87e17afb3e2..c87e17afb3e2 100644
--- a/drivers/video/mb862xx/mb862xx-i2c.c
+++ b/drivers/video/fbdev/mb862xx/mb862xx-i2c.c
diff --git a/drivers/video/mb862xx/mb862xx_reg.h b/drivers/video/fbdev/mb862xx/mb862xx_reg.h
index 9df48b8edc94..9df48b8edc94 100644
--- a/drivers/video/mb862xx/mb862xx_reg.h
+++ b/drivers/video/fbdev/mb862xx/mb862xx_reg.h
diff --git a/drivers/video/mb862xx/mb862xxfb.h b/drivers/video/fbdev/mb862xx/mb862xxfb.h
index 8550630c1e01..8550630c1e01 100644
--- a/drivers/video/mb862xx/mb862xxfb.h
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb.h
diff --git a/drivers/video/mb862xx/mb862xxfb_accel.c b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
index fe92eed6da70..fe92eed6da70 100644
--- a/drivers/video/mb862xx/mb862xxfb_accel.c
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
diff --git a/drivers/video/mb862xx/mb862xxfb_accel.h b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.h
index 96a2dfef0f60..96a2dfef0f60 100644
--- a/drivers/video/mb862xx/mb862xxfb_accel.h
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.h
diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
index 0cd4c3318511..0cd4c3318511 100644
--- a/drivers/video/mb862xx/mb862xxfbdrv.c
+++ b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
diff --git a/drivers/video/mbx/Makefile b/drivers/video/fbdev/mbx/Makefile
index 16c1165cf9c7..16c1165cf9c7 100644
--- a/drivers/video/mbx/Makefile
+++ b/drivers/video/fbdev/mbx/Makefile
diff --git a/drivers/video/mbx/mbxdebugfs.c b/drivers/video/fbdev/mbx/mbxdebugfs.c
index 4449f249b0e7..4449f249b0e7 100644
--- a/drivers/video/mbx/mbxdebugfs.c
+++ b/drivers/video/fbdev/mbx/mbxdebugfs.c
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/fbdev/mbx/mbxfb.c
index f0a5392f5fd3..f0a5392f5fd3 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/fbdev/mbx/mbxfb.c
diff --git a/drivers/video/mbx/reg_bits.h b/drivers/video/fbdev/mbx/reg_bits.h
index 5f14b4befd71..5f14b4befd71 100644
--- a/drivers/video/mbx/reg_bits.h
+++ b/drivers/video/fbdev/mbx/reg_bits.h
diff --git a/drivers/video/mbx/regs.h b/drivers/video/fbdev/mbx/regs.h
index 063099d48839..063099d48839 100644
--- a/drivers/video/mbx/regs.h
+++ b/drivers/video/fbdev/mbx/regs.h
diff --git a/drivers/video/metronomefb.c b/drivers/video/fbdev/metronomefb.c
index 195cc2db4c2c..195cc2db4c2c 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/fbdev/metronomefb.c
diff --git a/drivers/video/mmp/Kconfig b/drivers/video/fbdev/mmp/Kconfig
index e9ea39e13722..d4a4ffc24749 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/fbdev/mmp/Kconfig
@@ -5,7 +5,7 @@ menuconfig MMP_DISP
 	  Marvell Display Subsystem support.
 
 if MMP_DISP
-source "drivers/video/mmp/hw/Kconfig"
-source "drivers/video/mmp/panel/Kconfig"
-source "drivers/video/mmp/fb/Kconfig"
+source "drivers/video/fbdev/mmp/hw/Kconfig"
+source "drivers/video/fbdev/mmp/panel/Kconfig"
+source "drivers/video/fbdev/mmp/fb/Kconfig"
 endif
diff --git a/drivers/video/mmp/Makefile b/drivers/video/fbdev/mmp/Makefile
index a014cb358bf8..a014cb358bf8 100644
--- a/drivers/video/mmp/Makefile
+++ b/drivers/video/fbdev/mmp/Makefile
diff --git a/drivers/video/mmp/core.c b/drivers/video/fbdev/mmp/core.c
index b563b920f159..b563b920f159 100644
--- a/drivers/video/mmp/core.c
+++ b/drivers/video/fbdev/mmp/core.c
diff --git a/drivers/video/mmp/fb/Kconfig b/drivers/video/fbdev/mmp/fb/Kconfig
index 9b0141f105f5..9b0141f105f5 100644
--- a/drivers/video/mmp/fb/Kconfig
+++ b/drivers/video/fbdev/mmp/fb/Kconfig
diff --git a/drivers/video/mmp/fb/Makefile b/drivers/video/fbdev/mmp/fb/Makefile
index 709fd1f76abe..709fd1f76abe 100644
--- a/drivers/video/mmp/fb/Makefile
+++ b/drivers/video/fbdev/mmp/fb/Makefile
diff --git a/drivers/video/mmp/fb/mmpfb.c b/drivers/video/fbdev/mmp/fb/mmpfb.c
index 7ab31eb76a8c..7ab31eb76a8c 100644
--- a/drivers/video/mmp/fb/mmpfb.c
+++ b/drivers/video/fbdev/mmp/fb/mmpfb.c
diff --git a/drivers/video/mmp/fb/mmpfb.h b/drivers/video/fbdev/mmp/fb/mmpfb.h
index 88c23c10a9ec..88c23c10a9ec 100644
--- a/drivers/video/mmp/fb/mmpfb.h
+++ b/drivers/video/fbdev/mmp/fb/mmpfb.h
diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/fbdev/mmp/hw/Kconfig
index 02f109a20cd0..02f109a20cd0 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/fbdev/mmp/hw/Kconfig
diff --git a/drivers/video/mmp/hw/Makefile b/drivers/video/fbdev/mmp/hw/Makefile
index 0000a714fedf..0000a714fedf 100644
--- a/drivers/video/mmp/hw/Makefile
+++ b/drivers/video/fbdev/mmp/hw/Makefile
diff --git a/drivers/video/mmp/hw/mmp_ctrl.c b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
index 8621a9f2bdcc..8621a9f2bdcc 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.c
+++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
index 53301cfdb1ae..53301cfdb1ae 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.h
+++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
diff --git a/drivers/video/mmp/hw/mmp_spi.c b/drivers/video/fbdev/mmp/hw/mmp_spi.c
index e62ca7bf0d5e..e62ca7bf0d5e 100644
--- a/drivers/video/mmp/hw/mmp_spi.c
+++ b/drivers/video/fbdev/mmp/hw/mmp_spi.c
diff --git a/drivers/video/mmp/panel/Kconfig b/drivers/video/fbdev/mmp/panel/Kconfig
index 4b2c4f457b11..4b2c4f457b11 100644
--- a/drivers/video/mmp/panel/Kconfig
+++ b/drivers/video/fbdev/mmp/panel/Kconfig
diff --git a/drivers/video/mmp/panel/Makefile b/drivers/video/fbdev/mmp/panel/Makefile
index 2f91611c7e5e..2f91611c7e5e 100644
--- a/drivers/video/mmp/panel/Makefile
+++ b/drivers/video/fbdev/mmp/panel/Makefile
diff --git a/drivers/video/mmp/panel/tpo_tj032md01bw.c b/drivers/video/fbdev/mmp/panel/tpo_tj032md01bw.c
index 998978b08f5e..998978b08f5e 100644
--- a/drivers/video/mmp/panel/tpo_tj032md01bw.c
+++ b/drivers/video/fbdev/mmp/panel/tpo_tj032md01bw.c
diff --git a/drivers/video/msm/Makefile b/drivers/video/fbdev/msm/Makefile
index 802d6ae523fb..802d6ae523fb 100644
--- a/drivers/video/msm/Makefile
+++ b/drivers/video/fbdev/msm/Makefile
diff --git a/drivers/video/msm/mddi.c b/drivers/video/fbdev/msm/mddi.c
index e0f8011a3c4b..e0f8011a3c4b 100644
--- a/drivers/video/msm/mddi.c
+++ b/drivers/video/fbdev/msm/mddi.c
diff --git a/drivers/video/msm/mddi_client_dummy.c b/drivers/video/fbdev/msm/mddi_client_dummy.c
index f1b0dfcc9717..f1b0dfcc9717 100644
--- a/drivers/video/msm/mddi_client_dummy.c
+++ b/drivers/video/fbdev/msm/mddi_client_dummy.c
diff --git a/drivers/video/msm/mddi_client_nt35399.c b/drivers/video/fbdev/msm/mddi_client_nt35399.c
index f96df32e5509..f96df32e5509 100644
--- a/drivers/video/msm/mddi_client_nt35399.c
+++ b/drivers/video/fbdev/msm/mddi_client_nt35399.c
diff --git a/drivers/video/msm/mddi_client_toshiba.c b/drivers/video/fbdev/msm/mddi_client_toshiba.c
index 061d7dfebbf3..061d7dfebbf3 100644
--- a/drivers/video/msm/mddi_client_toshiba.c
+++ b/drivers/video/fbdev/msm/mddi_client_toshiba.c
diff --git a/drivers/video/msm/mddi_hw.h b/drivers/video/fbdev/msm/mddi_hw.h
index 45cc01fc1e7f..45cc01fc1e7f 100644
--- a/drivers/video/msm/mddi_hw.h
+++ b/drivers/video/fbdev/msm/mddi_hw.h
diff --git a/drivers/video/msm/mdp.c b/drivers/video/fbdev/msm/mdp.c
index 113c7876c855..113c7876c855 100644
--- a/drivers/video/msm/mdp.c
+++ b/drivers/video/fbdev/msm/mdp.c
diff --git a/drivers/video/msm/mdp_csc_table.h b/drivers/video/fbdev/msm/mdp_csc_table.h
index d1cde30ead52..d1cde30ead52 100644
--- a/drivers/video/msm/mdp_csc_table.h
+++ b/drivers/video/fbdev/msm/mdp_csc_table.h
diff --git a/drivers/video/msm/mdp_hw.h b/drivers/video/fbdev/msm/mdp_hw.h
index 35848d741001..35848d741001 100644
--- a/drivers/video/msm/mdp_hw.h
+++ b/drivers/video/fbdev/msm/mdp_hw.h
diff --git a/drivers/video/msm/mdp_ppp.c b/drivers/video/fbdev/msm/mdp_ppp.c
index be6079cdfbb6..be6079cdfbb6 100644
--- a/drivers/video/msm/mdp_ppp.c
+++ b/drivers/video/fbdev/msm/mdp_ppp.c
diff --git a/drivers/video/msm/mdp_scale_tables.c b/drivers/video/fbdev/msm/mdp_scale_tables.c
index 604783b2e17c..604783b2e17c 100644
--- a/drivers/video/msm/mdp_scale_tables.c
+++ b/drivers/video/fbdev/msm/mdp_scale_tables.c
diff --git a/drivers/video/msm/mdp_scale_tables.h b/drivers/video/fbdev/msm/mdp_scale_tables.h
index 34077b1af603..34077b1af603 100644
--- a/drivers/video/msm/mdp_scale_tables.h
+++ b/drivers/video/fbdev/msm/mdp_scale_tables.h
diff --git a/drivers/video/msm/msm_fb.c b/drivers/video/fbdev/msm/msm_fb.c
index 1374803fbcd9..1374803fbcd9 100644
--- a/drivers/video/msm/msm_fb.c
+++ b/drivers/video/fbdev/msm/msm_fb.c
diff --git a/drivers/video/mx3fb.c b/drivers/video/fbdev/mx3fb.c
index 142e860fb527..142e860fb527 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/fbdev/mx3fb.c
diff --git a/drivers/video/mxsfb.c b/drivers/video/fbdev/mxsfb.c
index accf48a2cce4..accf48a2cce4 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/fbdev/mxsfb.c
diff --git a/drivers/video/n411.c b/drivers/video/fbdev/n411.c
index 935830fea7b6..935830fea7b6 100644
--- a/drivers/video/n411.c
+++ b/drivers/video/fbdev/n411.c
diff --git a/drivers/video/neofb.c b/drivers/video/fbdev/neofb.c
index 44f99a60bb9b..44f99a60bb9b 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/fbdev/neofb.c
diff --git a/drivers/video/nuc900fb.c b/drivers/video/fbdev/nuc900fb.c
index 478f9808dee4..478f9808dee4 100644
--- a/drivers/video/nuc900fb.c
+++ b/drivers/video/fbdev/nuc900fb.c
diff --git a/drivers/video/nuc900fb.h b/drivers/video/fbdev/nuc900fb.h
index 9a1ca6dbb6b2..9a1ca6dbb6b2 100644
--- a/drivers/video/nuc900fb.h
+++ b/drivers/video/fbdev/nuc900fb.h
diff --git a/drivers/video/nvidia/Makefile b/drivers/video/fbdev/nvidia/Makefile
index ca47432113e0..ca47432113e0 100644
--- a/drivers/video/nvidia/Makefile
+++ b/drivers/video/fbdev/nvidia/Makefile
diff --git a/drivers/video/nvidia/nv_accel.c b/drivers/video/fbdev/nvidia/nv_accel.c
index ad6472a894ea..ad6472a894ea 100644
--- a/drivers/video/nvidia/nv_accel.c
+++ b/drivers/video/fbdev/nvidia/nv_accel.c
diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/fbdev/nvidia/nv_backlight.c
index 8471008aa6ff..8471008aa6ff 100644
--- a/drivers/video/nvidia/nv_backlight.c
+++ b/drivers/video/fbdev/nvidia/nv_backlight.c
diff --git a/drivers/video/nvidia/nv_dma.h b/drivers/video/fbdev/nvidia/nv_dma.h
index a7ed1c0acbbb..a7ed1c0acbbb 100644
--- a/drivers/video/nvidia/nv_dma.h
+++ b/drivers/video/fbdev/nvidia/nv_dma.h
diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/fbdev/nvidia/nv_hw.c
index 81c80ac3c76f..81c80ac3c76f 100644
--- a/drivers/video/nvidia/nv_hw.c
+++ b/drivers/video/fbdev/nvidia/nv_hw.c
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/fbdev/nvidia/nv_i2c.c
index d7994a173245..d7994a173245 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/fbdev/nvidia/nv_i2c.c
diff --git a/drivers/video/nvidia/nv_local.h b/drivers/video/fbdev/nvidia/nv_local.h
index 68e508daa417..68e508daa417 100644
--- a/drivers/video/nvidia/nv_local.h
+++ b/drivers/video/fbdev/nvidia/nv_local.h
diff --git a/drivers/video/nvidia/nv_of.c b/drivers/video/fbdev/nvidia/nv_of.c
index 3bc13df4b120..3bc13df4b120 100644
--- a/drivers/video/nvidia/nv_of.c
+++ b/drivers/video/fbdev/nvidia/nv_of.c
diff --git a/drivers/video/nvidia/nv_proto.h b/drivers/video/fbdev/nvidia/nv_proto.h
index ff5c410355ea..ff5c410355ea 100644
--- a/drivers/video/nvidia/nv_proto.h
+++ b/drivers/video/fbdev/nvidia/nv_proto.h
diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/fbdev/nvidia/nv_setup.c
index 2f2e162134fa..2f2e162134fa 100644
--- a/drivers/video/nvidia/nv_setup.c
+++ b/drivers/video/fbdev/nvidia/nv_setup.c
diff --git a/drivers/video/nvidia/nv_type.h b/drivers/video/fbdev/nvidia/nv_type.h
index c03f7f55c76d..c03f7f55c76d 100644
--- a/drivers/video/nvidia/nv_type.h
+++ b/drivers/video/fbdev/nvidia/nv_type.h
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/fbdev/nvidia/nvidia.c
index def041204676..def041204676 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/fbdev/nvidia/nvidia.c
diff --git a/drivers/video/ocfb.c b/drivers/video/fbdev/ocfb.c
index 7f9dc9bec309..7f9dc9bec309 100644
--- a/drivers/video/ocfb.c
+++ b/drivers/video/fbdev/ocfb.c
diff --git a/drivers/video/offb.c b/drivers/video/fbdev/offb.c
index 7d44d669d5b6..7d44d669d5b6 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/fbdev/offb.c
diff --git a/drivers/video/omap/Kconfig b/drivers/video/fbdev/omap/Kconfig
index 0bc3a936ce2b..0bc3a936ce2b 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/fbdev/omap/Kconfig
diff --git a/drivers/video/omap/Makefile b/drivers/video/fbdev/omap/Makefile
index 1927faffb5bc..1927faffb5bc 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/fbdev/omap/Makefile
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
index a4ee65b8f918..a4ee65b8f918 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/fbdev/omap/hwa742.c
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
index 4a5f2cd3d3bf..4a5f2cd3d3bf 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/fbdev/omap/lcd_ams_delta.c
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/fbdev/omap/lcd_h3.c
index 49bdeca81e50..49bdeca81e50 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/fbdev/omap/lcd_h3.c
diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/fbdev/omap/lcd_htcherald.c
index 20f477851d54..20f477851d54 100644
--- a/drivers/video/omap/lcd_htcherald.c
+++ b/drivers/video/fbdev/omap/lcd_htcherald.c
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/fbdev/omap/lcd_inn1510.c
index 2ee423279e35..2ee423279e35 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/fbdev/omap/lcd_inn1510.c
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/fbdev/omap/lcd_inn1610.c
index e3d3d135aa48..e3d3d135aa48 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/fbdev/omap/lcd_inn1610.c
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c
index 803fee618d57..803fee618d57 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/fbdev/omap/lcd_mipid.c
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c
index 7fbe04bce0ed..7fbe04bce0ed 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/fbdev/omap/lcd_osk.c
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/fbdev/omap/lcd_palmte.c
index ff4fb624b904..ff4fb624b904 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/fbdev/omap/lcd_palmte.c
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/fbdev/omap/lcd_palmtt.c
index aaf3c8ba1243..aaf3c8ba1243 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/fbdev/omap/lcd_palmtt.c
diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/fbdev/omap/lcd_palmz71.c
index 3b7d8aa1cf34..3b7d8aa1cf34 100644
--- a/drivers/video/omap/lcd_palmz71.c
+++ b/drivers/video/fbdev/omap/lcd_palmz71.c
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
index b52f62595f65..b52f62595f65 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/fbdev/omap/lcdc.c
diff --git a/drivers/video/omap/lcdc.h b/drivers/video/fbdev/omap/lcdc.h
index 845222270db3..845222270db3 100644
--- a/drivers/video/omap/lcdc.h
+++ b/drivers/video/fbdev/omap/lcdc.h
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/fbdev/omap/omapfb.h
index 2921d20e4fba..2921d20e4fba 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/fbdev/omap/omapfb.h
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
index e4fc6d9b5371..e4fc6d9b5371 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/fbdev/omap/omapfb_main.c
diff --git a/drivers/video/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..d4e7684e7045 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
diff --git a/drivers/video/fbdev/omap2/Kconfig b/drivers/video/fbdev/omap2/Kconfig
new file mode 100644
index 000000000000..c22955d2de9a
--- /dev/null
+++ b/drivers/video/fbdev/omap2/Kconfig
@@ -0,0 +1,10 @@
+config OMAP2_VRFB
+	bool
+
+if ARCH_OMAP2PLUS
+
+source "drivers/video/fbdev/omap2/dss/Kconfig"
+source "drivers/video/fbdev/omap2/omapfb/Kconfig"
+source "drivers/video/fbdev/omap2/displays-new/Kconfig"
+
+endif
diff --git a/drivers/video/omap2/Makefile b/drivers/video/fbdev/omap2/Makefile
index bf8127df8c71..bf8127df8c71 100644
--- a/drivers/video/omap2/Makefile
+++ b/drivers/video/fbdev/omap2/Makefile
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/fbdev/omap2/displays-new/Kconfig
index e6cfc38160d3..e6cfc38160d3 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/fbdev/omap2/displays-new/Kconfig
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/fbdev/omap2/displays-new/Makefile
index 0323a8a1c682..0323a8a1c682 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/fbdev/omap2/displays-new/Makefile
diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c b/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
index 5ee3b5505f7f..5ee3b5505f7f 100644
--- a/drivers/video/omap2/displays-new/connector-analog-tv.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
diff --git a/drivers/video/omap2/displays-new/connector-dvi.c b/drivers/video/fbdev/omap2/displays-new/connector-dvi.c
index 74de2bc50c4f..74de2bc50c4f 100644
--- a/drivers/video/omap2/displays-new/connector-dvi.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-dvi.c
diff --git a/drivers/video/omap2/displays-new/connector-hdmi.c b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
index 29ed21b9dce5..29ed21b9dce5 100644
--- a/drivers/video/omap2/displays-new/connector-hdmi.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
diff --git a/drivers/video/omap2/displays-new/encoder-tfp410.c b/drivers/video/fbdev/omap2/displays-new/encoder-tfp410.c
index b4e9a42a79e6..b4e9a42a79e6 100644
--- a/drivers/video/omap2/displays-new/encoder-tfp410.c
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-tfp410.c
diff --git a/drivers/video/omap2/displays-new/encoder-tpd12s015.c b/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
index 7e33686171e3..7e33686171e3 100644
--- a/drivers/video/omap2/displays-new/encoder-tpd12s015.c
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
diff --git a/drivers/video/omap2/displays-new/panel-dpi.c b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
index 5f8f7e7c81ef..5f8f7e7c81ef 100644
--- a/drivers/video/omap2/displays-new/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/fbdev/omap2/displays-new/panel-dsi-cm.c
index d6f14e8717e8..d6f14e8717e8 100644
--- a/drivers/video/omap2/displays-new/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dsi-cm.c
diff --git a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 2e6b513222d9..2e6b513222d9 100644
--- a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
diff --git a/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
index 996fa004b48c..996fa004b48c 100644
--- a/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
diff --git a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
index b2f710be565d..b2f710be565d 100644
--- a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c
index c7ba4d8b928a..c7ba4d8b928a 100644
--- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index fae6adc005a7..fae6adc005a7 100644
--- a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
index 875b40263b33..875b40263b33 100644
--- a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/fbdev/omap2/dss/Kconfig
index dde4281663b1..dde4281663b1 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/fbdev/omap2/dss/Kconfig
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/fbdev/omap2/dss/Makefile
index 8aec8bda27cc..8aec8bda27cc 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/fbdev/omap2/dss/Makefile
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/fbdev/omap2/dss/apply.c
index 0a0b084ce65d..0a0b084ce65d 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/fbdev/omap2/dss/apply.c
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/fbdev/omap2/dss/core.c
index ffa45c894cd4..ffa45c894cd4 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/fbdev/omap2/dss/core.c
diff --git a/drivers/video/omap2/dss/dispc-compat.c b/drivers/video/fbdev/omap2/dss/dispc-compat.c
index 83779c2b292a..83779c2b292a 100644
--- a/drivers/video/omap2/dss/dispc-compat.c
+++ b/drivers/video/fbdev/omap2/dss/dispc-compat.c
diff --git a/drivers/video/omap2/dss/dispc-compat.h b/drivers/video/fbdev/omap2/dss/dispc-compat.h
index 14a69b3d4fb0..14a69b3d4fb0 100644
--- a/drivers/video/omap2/dss/dispc-compat.h
+++ b/drivers/video/fbdev/omap2/dss/dispc-compat.h
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/fbdev/omap2/dss/dispc.c
index 2bbdb7ff7daf..f18397c33e8f 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/dss/dispc.c
@@ -101,6 +101,8 @@ static struct {
 	void __iomem    *base;
 
 	int irq;
+	irq_handler_t user_handler;
+	void *user_data;
 
 	unsigned long core_clk_rate;
 	unsigned long tv_pclk_rate;
@@ -113,6 +115,8 @@ static struct {
 	u32		ctx[DISPC_SZ_REGS / sizeof(u32)];
 
 	const struct dispc_features *feat;
+
+	bool is_enabled;
 } dispc;
 
 enum omap_color_component {
@@ -141,12 +145,18 @@ enum mgr_reg_fields {
 	DISPC_MGR_FLD_NUM,
 };
 
+struct dispc_reg_field {
+	u16 reg;
+	u8 high;
+	u8 low;
+};
+
 static const struct {
 	const char *name;
 	u32 vsync_irq;
 	u32 framedone_irq;
 	u32 sync_lost_irq;
-	struct reg_field reg_desc[DISPC_MGR_FLD_NUM];
+	struct dispc_reg_field reg_desc[DISPC_MGR_FLD_NUM];
 } mgr_desc[] = {
 	[OMAP_DSS_CHANNEL_LCD] = {
 		.name		= "LCD",
@@ -238,13 +248,13 @@ static inline u32 dispc_read_reg(const u16 idx)
 
 static u32 mgr_fld_read(enum omap_channel channel, enum mgr_reg_fields regfld)
 {
-	const struct reg_field rfld = mgr_desc[channel].reg_desc[regfld];
+	const struct dispc_reg_field rfld = mgr_desc[channel].reg_desc[regfld];
 	return REG_GET(rfld.reg, rfld.high, rfld.low);
 }
 
 static void mgr_fld_write(enum omap_channel channel,
 					enum mgr_reg_fields regfld, int val) {
-	const struct reg_field rfld = mgr_desc[channel].reg_desc[regfld];
+	const struct dispc_reg_field rfld = mgr_desc[channel].reg_desc[regfld];
 	REG_FLD_MOD(rfld.reg, val, rfld.high, rfld.low);
 }
 
@@ -3669,16 +3679,44 @@ static int __init dispc_init_features(struct platform_device *pdev)
 	return 0;
 }
 
+static irqreturn_t dispc_irq_handler(int irq, void *arg)
+{
+	if (!dispc.is_enabled)
+		return IRQ_NONE;
+
+	return dispc.user_handler(irq, dispc.user_data);
+}
+
 int dispc_request_irq(irq_handler_t handler, void *dev_id)
 {
-	return devm_request_irq(&dispc.pdev->dev, dispc.irq, handler,
-			     IRQF_SHARED, "OMAP DISPC", dev_id);
+	int r;
+
+	if (dispc.user_handler != NULL)
+		return -EBUSY;
+
+	dispc.user_handler = handler;
+	dispc.user_data = dev_id;
+
+	/* ensure the dispc_irq_handler sees the values above */
+	smp_wmb();
+
+	r = devm_request_irq(&dispc.pdev->dev, dispc.irq, dispc_irq_handler,
+			     IRQF_SHARED, "OMAP DISPC", &dispc);
+	if (r) {
+		dispc.user_handler = NULL;
+		dispc.user_data = NULL;
+	}
+
+	return r;
 }
 EXPORT_SYMBOL(dispc_request_irq);
 
 void dispc_free_irq(void *dev_id)
 {
-	devm_free_irq(&dispc.pdev->dev, dispc.irq, dev_id);
+	devm_free_irq(&dispc.pdev->dev, dispc.irq, &dispc);
+
+	dispc.user_handler = NULL;
+	dispc.user_data = NULL;
 }
 EXPORT_SYMBOL(dispc_free_irq);
 
@@ -3750,6 +3788,12 @@ static int __exit omap_dispchw_remove(struct platform_device *pdev)
 
 static int dispc_runtime_suspend(struct device *dev)
 {
+	dispc.is_enabled = false;
+	/* ensure the dispc_irq_handler sees the is_enabled value */
+	smp_wmb();
+	/* wait for current handler to finish before turning the DISPC off */
+	synchronize_irq(dispc.irq);
+
 	dispc_save_context();
 
 	return 0;
@@ -3763,12 +3807,15 @@ static int dispc_runtime_resume(struct device *dev)
 	 * _omap_dispc_initial_config(). We can thus use it to detect if
 	 * we have lost register context.
 	 */
-	if (REG_GET(DISPC_CONFIG, 2, 1) == OMAP_DSS_LOAD_FRAME_ONLY)
-		return 0;
+	if (REG_GET(DISPC_CONFIG, 2, 1) != OMAP_DSS_LOAD_FRAME_ONLY) {
+		_omap_dispc_initial_config();
 
-	_omap_dispc_initial_config();
+		dispc_restore_context();
+	}
 
-	dispc_restore_context();
+	dispc.is_enabled = true;
+	/* ensure the dispc_irq_handler sees the is_enabled value */
+	smp_wmb();
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/fbdev/omap2/dss/dispc.h
index 78edb449c763..78edb449c763 100644
--- a/drivers/video/omap2/dss/dispc.h
+++ b/drivers/video/fbdev/omap2/dss/dispc.h
diff --git a/drivers/video/omap2/dss/dispc_coefs.c b/drivers/video/fbdev/omap2/dss/dispc_coefs.c
index 038c15b04215..038c15b04215 100644
--- a/drivers/video/omap2/dss/dispc_coefs.c
+++ b/drivers/video/fbdev/omap2/dss/dispc_coefs.c
diff --git a/drivers/video/omap2/dss/display-sysfs.c b/drivers/video/fbdev/omap2/dss/display-sysfs.c
index 5a2095a98ed8..5a2095a98ed8 100644
--- a/drivers/video/omap2/dss/display-sysfs.c
+++ b/drivers/video/fbdev/omap2/dss/display-sysfs.c
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/fbdev/omap2/dss/display.c
index 2412a0dd0c13..2412a0dd0c13 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/fbdev/omap2/dss/display.c
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index 157921db447a..157921db447a 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/fbdev/omap2/dss/dsi.c
index 121d1049d0bc..8be9b04d8849 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/fbdev/omap2/dss/dsi.c
@@ -297,6 +297,8 @@ struct dsi_data {
 
 	int irq;
 
+	bool is_enabled;
+
 	struct clk *dss_clk;
 	struct clk *sys_clk;
 
@@ -795,6 +797,9 @@ static irqreturn_t omap_dsi_irq_handler(int irq, void *arg)
 	dsidev = (struct platform_device *) arg;
 	dsi = dsi_get_dsidrv_data(dsidev);
 
+	if (!dsi->is_enabled)
+		return IRQ_NONE;
+
 	spin_lock(&dsi->irq_lock);
 
 	irqstatus = dsi_read_reg(dsidev, DSI_IRQSTATUS);
@@ -5671,6 +5676,15 @@ static int __exit omap_dsihw_remove(struct platform_device *dsidev)
 
 static int dsi_runtime_suspend(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
+
+	dsi->is_enabled = false;
+	/* ensure the irq handler sees the is_enabled value */
+	smp_wmb();
+	/* wait for current handler to finish before turning the DSI off */
+	synchronize_irq(dsi->irq);
+
 	dispc_runtime_put();
 
 	return 0;
@@ -5678,12 +5692,18 @@ static int dsi_runtime_suspend(struct device *dev)
 
 static int dsi_runtime_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
 	int r;
 
 	r = dispc_runtime_get();
 	if (r)
 		return r;
 
+	dsi->is_enabled = true;
+	/* ensure the irq handler sees the is_enabled value */
+	smp_wmb();
+
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/dss-of.c b/drivers/video/fbdev/omap2/dss/dss-of.c
index a4b20aaf6142..a4b20aaf6142 100644
--- a/drivers/video/omap2/dss/dss-of.c
+++ b/drivers/video/fbdev/omap2/dss/dss-of.c
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index 825c019ddee7..d55266c0e029 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -457,7 +457,7 @@ bool dss_div_calc(unsigned long pck, unsigned long fck_min,
 	fckd_stop = max(DIV_ROUND_UP(prate * m, fck_hw_max), 1ul);
 
 	for (fckd = fckd_start; fckd >= fckd_stop; --fckd) {
-		fck = prate / fckd * m;
+		fck = DIV_ROUND_UP(prate, fckd) * m;
 
 		if (func(fck, data))
 			return true;
@@ -506,7 +506,7 @@ static int dss_setup_default_clock(void)
 
 		fck_div = DIV_ROUND_UP(prate * dss.feat->dss_fck_multiplier,
 				max_dss_fck);
-		fck = prate / fck_div * dss.feat->dss_fck_multiplier;
+		fck = DIV_ROUND_UP(prate, fck_div) * dss.feat->dss_fck_multiplier;
 	}
 
 	r = dss_set_fck_rate(fck);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 918fec182424..560078fcb198 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -131,12 +131,6 @@ struct dsi_clock_info {
 	u16 lp_clk_div;
 };
 
-struct reg_field {
-	u16 reg;
-	u8 high;
-	u8 low;
-};
-
 struct dss_lcd_mgr_config {
 	enum dss_io_pad_mode io_pad_mode;
 
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/fbdev/omap2/dss/dss_features.c
index 7f8969191dc6..7f8969191dc6 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/fbdev/omap2/dss/dss_features.c
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/fbdev/omap2/dss/dss_features.h
index e3ef3b714896..e3ef3b714896 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/fbdev/omap2/dss/dss_features.h
diff --git a/drivers/video/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index e25681ff5a70..e25681ff5a70 100644
--- a/drivers/video/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
diff --git a/drivers/video/omap2/dss/hdmi4.c b/drivers/video/fbdev/omap2/dss/hdmi4.c
index f5f7944a1fd1..f5f7944a1fd1 100644
--- a/drivers/video/omap2/dss/hdmi4.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4.c
diff --git a/drivers/video/omap2/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
index 2eb04dcf807c..2eb04dcf807c 100644
--- a/drivers/video/omap2/dss/hdmi4_core.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
diff --git a/drivers/video/omap2/dss/hdmi4_core.h b/drivers/video/fbdev/omap2/dss/hdmi4_core.h
index bb646896fa82..bb646896fa82 100644
--- a/drivers/video/omap2/dss/hdmi4_core.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi4_core.h
diff --git a/drivers/video/omap2/dss/hdmi_common.c b/drivers/video/fbdev/omap2/dss/hdmi_common.c
index b11afac8e068..0b12a3f62fe1 100644
--- a/drivers/video/omap2/dss/hdmi_common.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_common.c
@@ -347,17 +347,17 @@ int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts)
 	case 96000:
 	case 192000:
 		if (deep_color == 125)
-			if (pclk == 27027 || pclk == 74250)
+			if (pclk == 27027000 || pclk == 74250000)
 				deep_color_correct = true;
 		if (deep_color == 150)
-			if (pclk == 27027)
+			if (pclk == 27027000)
 				deep_color_correct = true;
 		break;
 	case 44100:
 	case 88200:
 	case 176400:
 		if (deep_color == 125)
-			if (pclk == 27027)
+			if (pclk == 27027000)
 				deep_color_correct = true;
 		break;
 	default:
@@ -418,7 +418,7 @@ int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts)
 		}
 	}
 	/* Calculate CTS. See HDMI 1.3a or 1.4a specifications */
-	*cts = pclk * (*n / 128) * deep_color / (sample_freq / 10);
+	*cts = (pclk/1000) * (*n / 128) * deep_color / (sample_freq / 10);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
index dd376ce8da01..dd376ce8da01 100644
--- a/drivers/video/omap2/dss/hdmi_phy.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
diff --git a/drivers/video/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
index 5fc71215c303..5fc71215c303 100644
--- a/drivers/video/omap2/dss/hdmi_pll.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
diff --git a/drivers/video/omap2/dss/hdmi_wp.c b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
index f5f4ccf50d90..f5f4ccf50d90 100644
--- a/drivers/video/omap2/dss/hdmi_wp.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
diff --git a/drivers/video/omap2/dss/manager-sysfs.c b/drivers/video/fbdev/omap2/dss/manager-sysfs.c
index 37b59fe28dc8..37b59fe28dc8 100644
--- a/drivers/video/omap2/dss/manager-sysfs.c
+++ b/drivers/video/fbdev/omap2/dss/manager-sysfs.c
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/fbdev/omap2/dss/manager.c
index 1aac9b4191a9..1aac9b4191a9 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/fbdev/omap2/dss/manager.c
diff --git a/drivers/video/omap2/dss/output.c b/drivers/video/fbdev/omap2/dss/output.c
index 2ab3afa615e8..2ab3afa615e8 100644
--- a/drivers/video/omap2/dss/output.c
+++ b/drivers/video/fbdev/omap2/dss/output.c
diff --git a/drivers/video/omap2/dss/overlay-sysfs.c b/drivers/video/fbdev/omap2/dss/overlay-sysfs.c
index 4cc5ddebfb34..4cc5ddebfb34 100644
--- a/drivers/video/omap2/dss/overlay-sysfs.c
+++ b/drivers/video/fbdev/omap2/dss/overlay-sysfs.c
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/fbdev/omap2/dss/overlay.c
index 2f7cee985cdd..2f7cee985cdd 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/fbdev/omap2/dss/overlay.c
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/fbdev/omap2/dss/rfbi.c
index c8a81a2b879c..c8a81a2b879c 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/fbdev/omap2/dss/rfbi.c
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/fbdev/omap2/dss/sdi.c
index 911dcc9173a6..911dcc9173a6 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/fbdev/omap2/dss/sdi.c
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/fbdev/omap2/dss/venc.c
index 21d81113962b..21d81113962b 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/fbdev/omap2/dss/venc.c
diff --git a/drivers/video/omap2/dss/venc_panel.c b/drivers/video/fbdev/omap2/dss/venc_panel.c
index af68cd444d7e..af68cd444d7e 100644
--- a/drivers/video/omap2/dss/venc_panel.c
+++ b/drivers/video/fbdev/omap2/dss/venc_panel.c
diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/fbdev/omap2/omapfb/Kconfig
index 4cb12ce68855..4cb12ce68855 100644
--- a/drivers/video/omap2/omapfb/Kconfig
+++ b/drivers/video/fbdev/omap2/omapfb/Kconfig
diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/fbdev/omap2/omapfb/Makefile
index 51c2e00d9bf8..51c2e00d9bf8 100644
--- a/drivers/video/omap2/omapfb/Makefile
+++ b/drivers/video/fbdev/omap2/omapfb/Makefile
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
index 146b6f5428db..146b6f5428db 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/fbdev/omap2/omapfb/omapfb-main.c
index ec2d132c782d..ec2d132c782d 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-main.c
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
index 18fa9e1d0033..18fa9e1d0033 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/fbdev/omap2/omapfb/omapfb.h
index 623cd872a367..623cd872a367 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb.h
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/fbdev/omap2/vrfb.c
index f346b02eee1d..f346b02eee1d 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/fbdev/omap2/vrfb.c
diff --git a/drivers/video/p9100.c b/drivers/video/fbdev/p9100.c
index 367cea8f43f3..367cea8f43f3 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/fbdev/p9100.c
diff --git a/drivers/video/platinumfb.c b/drivers/video/fbdev/platinumfb.c
index 4c9299576827..4c9299576827 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/fbdev/platinumfb.c
diff --git a/drivers/video/platinumfb.h b/drivers/video/fbdev/platinumfb.h
index f6bd77cafd17..f6bd77cafd17 100644
--- a/drivers/video/platinumfb.h
+++ b/drivers/video/fbdev/platinumfb.h
diff --git a/drivers/video/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index 3b85b647bc10..3b85b647bc10 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
diff --git a/drivers/video/pm3fb.c b/drivers/video/fbdev/pm3fb.c
index 4bf3273d0433..4bf3273d0433 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/fbdev/pm3fb.c
diff --git a/drivers/video/pmag-aa-fb.c b/drivers/video/fbdev/pmag-aa-fb.c
index 838424817de2..838424817de2 100644
--- a/drivers/video/pmag-aa-fb.c
+++ b/drivers/video/fbdev/pmag-aa-fb.c
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/fbdev/pmag-ba-fb.c
index 914a52ba8477..914a52ba8477 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/fbdev/pmag-ba-fb.c
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/fbdev/pmagb-b-fb.c
index 0822b6f8dddc..0822b6f8dddc 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/fbdev/pmagb-b-fb.c
diff --git a/drivers/video/ps3fb.c b/drivers/video/fbdev/ps3fb.c
index b269abd932aa..b269abd932aa 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/fbdev/ps3fb.c
diff --git a/drivers/video/pvr2fb.c b/drivers/video/fbdev/pvr2fb.c
index 167cffff3d4e..167cffff3d4e 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/fbdev/pvr2fb.c
diff --git a/drivers/video/pxa168fb.c b/drivers/video/fbdev/pxa168fb.c
index c95b9e46d48f..c95b9e46d48f 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/fbdev/pxa168fb.c
diff --git a/drivers/video/pxa168fb.h b/drivers/video/fbdev/pxa168fb.h
index eee09279c524..eee09279c524 100644
--- a/drivers/video/pxa168fb.h
+++ b/drivers/video/fbdev/pxa168fb.h
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c
index 417f9a27eb7d..417f9a27eb7d 100644
--- a/drivers/video/pxa3xx-gcu.c
+++ b/drivers/video/fbdev/pxa3xx-gcu.c
diff --git a/drivers/video/pxa3xx-gcu.h b/drivers/video/fbdev/pxa3xx-gcu.h
index 0428ed03dc49..0428ed03dc49 100644
--- a/drivers/video/pxa3xx-gcu.h
+++ b/drivers/video/fbdev/pxa3xx-gcu.h
diff --git a/drivers/video/pxafb.c b/drivers/video/fbdev/pxafb.c
index 1ecd9cec2921..1ecd9cec2921 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
diff --git a/drivers/video/pxafb.h b/drivers/video/fbdev/pxafb.h
index 26ba9fa3f737..26ba9fa3f737 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/fbdev/pxafb.h
diff --git a/drivers/video/q40fb.c b/drivers/video/fbdev/q40fb.c
index 7487f76f6275..7487f76f6275 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/fbdev/q40fb.c
diff --git a/drivers/video/riva/Makefile b/drivers/video/fbdev/riva/Makefile
index 8898c9915b02..8898c9915b02 100644
--- a/drivers/video/riva/Makefile
+++ b/drivers/video/fbdev/riva/Makefile
diff --git a/drivers/video/riva/fbdev.c b/drivers/video/fbdev/riva/fbdev.c
index 8a8d7f060784..8a8d7f060784 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/fbdev/riva/fbdev.c
diff --git a/drivers/video/riva/nv_driver.c b/drivers/video/fbdev/riva/nv_driver.c
index f3694cf17e58..f3694cf17e58 100644
--- a/drivers/video/riva/nv_driver.c
+++ b/drivers/video/fbdev/riva/nv_driver.c
diff --git a/drivers/video/riva/nv_type.h b/drivers/video/fbdev/riva/nv_type.h
index a69480c9a67c..a69480c9a67c 100644
--- a/drivers/video/riva/nv_type.h
+++ b/drivers/video/fbdev/riva/nv_type.h
diff --git a/drivers/video/riva/nvreg.h b/drivers/video/fbdev/riva/nvreg.h
index abfc167ae8d8..abfc167ae8d8 100644
--- a/drivers/video/riva/nvreg.h
+++ b/drivers/video/fbdev/riva/nvreg.h
diff --git a/drivers/video/riva/riva_hw.c b/drivers/video/fbdev/riva/riva_hw.c
index 78fdbf5178d7..78fdbf5178d7 100644
--- a/drivers/video/riva/riva_hw.c
+++ b/drivers/video/fbdev/riva/riva_hw.c
diff --git a/drivers/video/riva/riva_hw.h b/drivers/video/fbdev/riva/riva_hw.h
index c2769f73e0b2..c2769f73e0b2 100644
--- a/drivers/video/riva/riva_hw.h
+++ b/drivers/video/fbdev/riva/riva_hw.h
diff --git a/drivers/video/riva/riva_tbl.h b/drivers/video/fbdev/riva/riva_tbl.h
index 7ee7d72932d4..7ee7d72932d4 100644
--- a/drivers/video/riva/riva_tbl.h
+++ b/drivers/video/fbdev/riva/riva_tbl.h
diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/fbdev/riva/rivafb-i2c.c
index 6a183375ced1..6a183375ced1 100644
--- a/drivers/video/riva/rivafb-i2c.c
+++ b/drivers/video/fbdev/riva/rivafb-i2c.c
diff --git a/drivers/video/riva/rivafb.h b/drivers/video/fbdev/riva/rivafb.h
index d9f107b704c6..d9f107b704c6 100644
--- a/drivers/video/riva/rivafb.h
+++ b/drivers/video/fbdev/riva/rivafb.h
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/fbdev/s1d13xxxfb.c
index 83433cb0dfba..83433cb0dfba 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/fbdev/s1d13xxxfb.c
diff --git a/drivers/video/s3c-fb.c b/drivers/video/fbdev/s3c-fb.c
index 62acae2694a9..62acae2694a9 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/fbdev/s3c-fb.c
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 81af5a63e9e1..81af5a63e9e1 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
index 47a17bd23011..47a17bd23011 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/fbdev/s3c2410fb.h
diff --git a/drivers/video/s3fb.c b/drivers/video/fbdev/s3fb.c
index 9a3f8f1c6aab..9a3f8f1c6aab 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/fbdev/s3fb.c
diff --git a/drivers/video/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 580c444ec301..580c444ec301 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
diff --git a/drivers/video/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index fc5d4292fad6..fc5d4292fad6 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h
diff --git a/drivers/video/savage/Makefile b/drivers/video/fbdev/savage/Makefile
index e09770fff8ea..e09770fff8ea 100644
--- a/drivers/video/savage/Makefile
+++ b/drivers/video/fbdev/savage/Makefile
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/fbdev/savage/savagefb-i2c.c
index 80fa87e2ae2f..80fa87e2ae2f 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/fbdev/savage/savagefb-i2c.c
diff --git a/drivers/video/savage/savagefb.h b/drivers/video/fbdev/savage/savagefb.h
index dcaab9012ca2..dcaab9012ca2 100644
--- a/drivers/video/savage/savagefb.h
+++ b/drivers/video/fbdev/savage/savagefb.h
diff --git a/drivers/video/savage/savagefb_accel.c b/drivers/video/fbdev/savage/savagefb_accel.c
index bfefa6234cf0..bfefa6234cf0 100644
--- a/drivers/video/savage/savagefb_accel.c
+++ b/drivers/video/fbdev/savage/savagefb_accel.c
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c
index 4dbf45f3b21a..4dbf45f3b21a 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/fbdev/savage/savagefb_driver.c
diff --git a/drivers/video/sbuslib.c b/drivers/video/fbdev/sbuslib.c
index a350209ffbd3..a350209ffbd3 100644
--- a/drivers/video/sbuslib.c
+++ b/drivers/video/fbdev/sbuslib.c
diff --git a/drivers/video/sbuslib.h b/drivers/video/fbdev/sbuslib.h
index 7ba3250236bd..7ba3250236bd 100644
--- a/drivers/video/sbuslib.h
+++ b/drivers/video/fbdev/sbuslib.h
diff --git a/drivers/video/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
index 1265b25f9f99..1265b25f9f99 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/fbdev/sh7760fb.c
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/fbdev/sh_mipi_dsi.c
index 8f6e8ff620d4..8f6e8ff620d4 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/fbdev/sh_mipi_dsi.c
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/fbdev/sh_mobile_hdmi.c
index 9a33ee0413fb..9a33ee0413fb 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/fbdev/sh_mobile_hdmi.c
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/fbdev/sh_mobile_lcdcfb.c
index 2bcc84ac18c7..2bcc84ac18c7 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/fbdev/sh_mobile_lcdcfb.c
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/fbdev/sh_mobile_lcdcfb.h
index f839adef1d90..f839adef1d90 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/fbdev/sh_mobile_lcdcfb.h
diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/fbdev/sh_mobile_meram.c
index a297de5cc859..a297de5cc859 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/fbdev/sh_mobile_meram.c
diff --git a/drivers/video/simplefb.c b/drivers/video/fbdev/simplefb.c
index 210f3a02121a..210f3a02121a 100644
--- a/drivers/video/simplefb.c
+++ b/drivers/video/fbdev/simplefb.c
diff --git a/drivers/video/sis/300vtbl.h b/drivers/video/fbdev/sis/300vtbl.h
index e4b4a2626da4..e4b4a2626da4 100644
--- a/drivers/video/sis/300vtbl.h
+++ b/drivers/video/fbdev/sis/300vtbl.h
diff --git a/drivers/video/sis/310vtbl.h b/drivers/video/fbdev/sis/310vtbl.h
index 54fcbbf4ef63..54fcbbf4ef63 100644
--- a/drivers/video/sis/310vtbl.h
+++ b/drivers/video/fbdev/sis/310vtbl.h
diff --git a/drivers/video/sis/Makefile b/drivers/video/fbdev/sis/Makefile
index f7c0046e5b1d..f7c0046e5b1d 100644
--- a/drivers/video/sis/Makefile
+++ b/drivers/video/fbdev/sis/Makefile
diff --git a/drivers/video/sis/init.c b/drivers/video/fbdev/sis/init.c
index bd40f5ecd901..bd40f5ecd901 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/fbdev/sis/init.c
diff --git a/drivers/video/sis/init.h b/drivers/video/fbdev/sis/init.h
index 85d6738b6c64..85d6738b6c64 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/fbdev/sis/init.h
diff --git a/drivers/video/sis/init301.c b/drivers/video/fbdev/sis/init301.c
index a89e3cafd5ad..a89e3cafd5ad 100644
--- a/drivers/video/sis/init301.c
+++ b/drivers/video/fbdev/sis/init301.c
diff --git a/drivers/video/sis/init301.h b/drivers/video/fbdev/sis/init301.h
index 2112d6d7feda..2112d6d7feda 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/fbdev/sis/init301.h
diff --git a/drivers/video/sis/initdef.h b/drivers/video/fbdev/sis/initdef.h
index 264b55a5947b..264b55a5947b 100644
--- a/drivers/video/sis/initdef.h
+++ b/drivers/video/fbdev/sis/initdef.h
diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/fbdev/sis/initextlfb.c
index 3ab18f5a3759..3ab18f5a3759 100644
--- a/drivers/video/sis/initextlfb.c
+++ b/drivers/video/fbdev/sis/initextlfb.c
diff --git a/drivers/video/sis/oem300.h b/drivers/video/fbdev/sis/oem300.h
index b73f26840143..b73f26840143 100644
--- a/drivers/video/sis/oem300.h
+++ b/drivers/video/fbdev/sis/oem300.h
diff --git a/drivers/video/sis/oem310.h b/drivers/video/fbdev/sis/oem310.h
index 8fce56e4482c..8fce56e4482c 100644
--- a/drivers/video/sis/oem310.h
+++ b/drivers/video/fbdev/sis/oem310.h
diff --git a/drivers/video/sis/sis.h b/drivers/video/fbdev/sis/sis.h
index 1987f1b7212f..1987f1b7212f 100644
--- a/drivers/video/sis/sis.h
+++ b/drivers/video/fbdev/sis/sis.h
diff --git a/drivers/video/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..ceb434c95c0d 100644
--- a/drivers/video/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
diff --git a/drivers/video/sis/sis_accel.h b/drivers/video/fbdev/sis/sis_accel.h
index 30e03cdf6b85..30e03cdf6b85 100644
--- a/drivers/video/sis/sis_accel.h
+++ b/drivers/video/fbdev/sis/sis_accel.h
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/fbdev/sis/sis_main.c
index 22ad028bf123..22ad028bf123 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/fbdev/sis/sis_main.c
diff --git a/drivers/video/sis/sis_main.h b/drivers/video/fbdev/sis/sis_main.h
index 32e23c209430..32e23c209430 100644
--- a/drivers/video/sis/sis_main.h
+++ b/drivers/video/fbdev/sis/sis_main.h
diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/fbdev/sis/vgatypes.h
index e3f9976cfef0..e3f9976cfef0 100644
--- a/drivers/video/sis/vgatypes.h
+++ b/drivers/video/fbdev/sis/vgatypes.h
diff --git a/drivers/video/sis/vstruct.h b/drivers/video/fbdev/sis/vstruct.h
index ea94d214dcff..ea94d214dcff 100644
--- a/drivers/video/sis/vstruct.h
+++ b/drivers/video/fbdev/sis/vstruct.h
diff --git a/drivers/video/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c
index fefde7c6add7..fefde7c6add7 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/fbdev/skeletonfb.c
diff --git a/drivers/video/sm501fb.c b/drivers/video/fbdev/sm501fb.c
index 1501979099dc..1501979099dc 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/fbdev/sm501fb.c
diff --git a/drivers/video/smscufx.c b/drivers/video/fbdev/smscufx.c
index d513ed6a49f2..d513ed6a49f2 100644
--- a/drivers/video/smscufx.c
+++ b/drivers/video/fbdev/smscufx.c
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index f4daa59f0a80..f4daa59f0a80 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
diff --git a/drivers/video/sstfb.c b/drivers/video/fbdev/sstfb.c
index f0cb279ef333..f0cb279ef333 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/fbdev/sstfb.c
diff --git a/drivers/video/sticore.h b/drivers/video/fbdev/sticore.h
index af1619536ac8..af1619536ac8 100644
--- a/drivers/video/sticore.h
+++ b/drivers/video/fbdev/sticore.h
diff --git a/drivers/video/stifb.c b/drivers/video/fbdev/stifb.c
index cfe8a2f905c5..cfe8a2f905c5 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/fbdev/stifb.c
diff --git a/drivers/video/sunxvr1000.c b/drivers/video/fbdev/sunxvr1000.c
index 58241b47a96d..58241b47a96d 100644
--- a/drivers/video/sunxvr1000.c
+++ b/drivers/video/fbdev/sunxvr1000.c
diff --git a/drivers/video/sunxvr2500.c b/drivers/video/fbdev/sunxvr2500.c
index 843b6bab0483..843b6bab0483 100644
--- a/drivers/video/sunxvr2500.c
+++ b/drivers/video/fbdev/sunxvr2500.c
diff --git a/drivers/video/sunxvr500.c b/drivers/video/fbdev/sunxvr500.c
index 387350d004df..387350d004df 100644
--- a/drivers/video/sunxvr500.c
+++ b/drivers/video/fbdev/sunxvr500.c
diff --git a/drivers/video/tcx.c b/drivers/video/fbdev/tcx.c
index 7fb2d696fac7..7fb2d696fac7 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/fbdev/tcx.c
diff --git a/drivers/video/tdfxfb.c b/drivers/video/fbdev/tdfxfb.c
index f761fe375f5b..f761fe375f5b 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/fbdev/tdfxfb.c
diff --git a/drivers/video/tgafb.c b/drivers/video/fbdev/tgafb.c
index 65ba9921506e..65ba9921506e 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/fbdev/tgafb.c
diff --git a/drivers/video/tmiofb.c b/drivers/video/fbdev/tmiofb.c
index 7fb4e321a431..7fb4e321a431 100644
--- a/drivers/video/tmiofb.c
+++ b/drivers/video/fbdev/tmiofb.c
diff --git a/drivers/video/tridentfb.c b/drivers/video/fbdev/tridentfb.c
index 7ed9a227f5ea..7ed9a227f5ea 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/fbdev/tridentfb.c
diff --git a/drivers/video/udlfb.c b/drivers/video/fbdev/udlfb.c
index 77b890e4d296..77b890e4d296 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
diff --git a/drivers/video/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 509d452e8f91..509d452e8f91 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
diff --git a/drivers/video/valkyriefb.c b/drivers/video/fbdev/valkyriefb.c
index 97cb9bd1d1dd..97cb9bd1d1dd 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/fbdev/valkyriefb.c
diff --git a/drivers/video/valkyriefb.h b/drivers/video/fbdev/valkyriefb.h
index d787441e5a42..d787441e5a42 100644
--- a/drivers/video/valkyriefb.h
+++ b/drivers/video/fbdev/valkyriefb.h
diff --git a/drivers/video/vermilion/Makefile b/drivers/video/fbdev/vermilion/Makefile
index cc21a656153d..cc21a656153d 100644
--- a/drivers/video/vermilion/Makefile
+++ b/drivers/video/fbdev/vermilion/Makefile
diff --git a/drivers/video/vermilion/cr_pll.c b/drivers/video/fbdev/vermilion/cr_pll.c
index ebc6e6e0dd0f..ebc6e6e0dd0f 100644
--- a/drivers/video/vermilion/cr_pll.c
+++ b/drivers/video/fbdev/vermilion/cr_pll.c
diff --git a/drivers/video/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c
index 048a66640b03..048a66640b03 100644
--- a/drivers/video/vermilion/vermilion.c
+++ b/drivers/video/fbdev/vermilion/vermilion.c
diff --git a/drivers/video/vermilion/vermilion.h b/drivers/video/fbdev/vermilion/vermilion.h
index 43d11ec197fc..43d11ec197fc 100644
--- a/drivers/video/vermilion/vermilion.h
+++ b/drivers/video/fbdev/vermilion/vermilion.h
diff --git a/drivers/video/vesafb.c b/drivers/video/fbdev/vesafb.c
index 6170e7f58640..6170e7f58640 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/fbdev/vesafb.c
diff --git a/drivers/video/vfb.c b/drivers/video/fbdev/vfb.c
index 70a897b1e458..70a897b1e458 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/fbdev/vfb.c
diff --git a/drivers/video/vga16fb.c b/drivers/video/fbdev/vga16fb.c
index 283d335a759f..283d335a759f 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/fbdev/vga16fb.c
diff --git a/drivers/video/via/Makefile b/drivers/video/fbdev/via/Makefile
index 159f26e6adb5..159f26e6adb5 100644
--- a/drivers/video/via/Makefile
+++ b/drivers/video/fbdev/via/Makefile
diff --git a/drivers/video/via/accel.c b/drivers/video/fbdev/via/accel.c
index 4b67b8e6030a..4b67b8e6030a 100644
--- a/drivers/video/via/accel.c
+++ b/drivers/video/fbdev/via/accel.c
diff --git a/drivers/video/via/accel.h b/drivers/video/fbdev/via/accel.h
index 79d5e10cc835..79d5e10cc835 100644
--- a/drivers/video/via/accel.h
+++ b/drivers/video/fbdev/via/accel.h
diff --git a/drivers/video/via/chip.h b/drivers/video/fbdev/via/chip.h
index d32a5076c20f..d32a5076c20f 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/fbdev/via/chip.h
diff --git a/drivers/video/via/debug.h b/drivers/video/fbdev/via/debug.h
index 86eacc2017f3..86eacc2017f3 100644
--- a/drivers/video/via/debug.h
+++ b/drivers/video/fbdev/via/debug.h
diff --git a/drivers/video/via/dvi.c b/drivers/video/fbdev/via/dvi.c
index 7789553952d3..7789553952d3 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/fbdev/via/dvi.c
diff --git a/drivers/video/via/dvi.h b/drivers/video/fbdev/via/dvi.h
index 4c6bfba57d11..4c6bfba57d11 100644
--- a/drivers/video/via/dvi.h
+++ b/drivers/video/fbdev/via/dvi.h
diff --git a/drivers/video/via/global.c b/drivers/video/fbdev/via/global.c
index 3102171c1674..3102171c1674 100644
--- a/drivers/video/via/global.c
+++ b/drivers/video/fbdev/via/global.c
diff --git a/drivers/video/via/global.h b/drivers/video/fbdev/via/global.h
index 275dbbbd6b81..275dbbbd6b81 100644
--- a/drivers/video/via/global.h
+++ b/drivers/video/fbdev/via/global.h
diff --git a/drivers/video/via/hw.c b/drivers/video/fbdev/via/hw.c
index 22450908306c..22450908306c 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/fbdev/via/hw.c
diff --git a/drivers/video/via/hw.h b/drivers/video/fbdev/via/hw.h
index 3be073c58b03..3be073c58b03 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/fbdev/via/hw.h
diff --git a/drivers/video/via/ioctl.c b/drivers/video/fbdev/via/ioctl.c
index ea1c51428823..ea1c51428823 100644
--- a/drivers/video/via/ioctl.c
+++ b/drivers/video/fbdev/via/ioctl.c
diff --git a/drivers/video/via/ioctl.h b/drivers/video/fbdev/via/ioctl.h
index 6010d10b59e8..6010d10b59e8 100644
--- a/drivers/video/via/ioctl.h
+++ b/drivers/video/fbdev/via/ioctl.h
diff --git a/drivers/video/via/lcd.c b/drivers/video/fbdev/via/lcd.c
index 5d21ff436ec8..5d21ff436ec8 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/fbdev/via/lcd.c
diff --git a/drivers/video/via/lcd.h b/drivers/video/fbdev/via/lcd.h
index 5c988a063ad5..5c988a063ad5 100644
--- a/drivers/video/via/lcd.h
+++ b/drivers/video/fbdev/via/lcd.h
diff --git a/drivers/video/via/share.h b/drivers/video/fbdev/via/share.h
index 65c65c611e0a..65c65c611e0a 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/fbdev/via/share.h
diff --git a/drivers/video/via/tblDPASetting.c b/drivers/video/fbdev/via/tblDPASetting.c
index 73bb554e7c1e..73bb554e7c1e 100644
--- a/drivers/video/via/tblDPASetting.c
+++ b/drivers/video/fbdev/via/tblDPASetting.c
diff --git a/drivers/video/via/tblDPASetting.h b/drivers/video/fbdev/via/tblDPASetting.h
index 6db61519cb5d..6db61519cb5d 100644
--- a/drivers/video/via/tblDPASetting.h
+++ b/drivers/video/fbdev/via/tblDPASetting.h
diff --git a/drivers/video/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 6e274825fb31..6e274825fb31 100644
--- a/drivers/video/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
diff --git a/drivers/video/via/via-gpio.c b/drivers/video/fbdev/via/via-gpio.c
index e408679081ab..e408679081ab 100644
--- a/drivers/video/via/via-gpio.c
+++ b/drivers/video/fbdev/via/via-gpio.c
diff --git a/drivers/video/via/via_aux.c b/drivers/video/fbdev/via/via_aux.c
index 4a0a55cdac3d..4a0a55cdac3d 100644
--- a/drivers/video/via/via_aux.c
+++ b/drivers/video/fbdev/via/via_aux.c
diff --git a/drivers/video/via/via_aux.h b/drivers/video/fbdev/via/via_aux.h
index a8de3f038cea..a8de3f038cea 100644
--- a/drivers/video/via/via_aux.h
+++ b/drivers/video/fbdev/via/via_aux.h
diff --git a/drivers/video/via/via_aux_ch7301.c b/drivers/video/fbdev/via/via_aux_ch7301.c
index 1cbe5037a6b0..1cbe5037a6b0 100644
--- a/drivers/video/via/via_aux_ch7301.c
+++ b/drivers/video/fbdev/via/via_aux_ch7301.c
diff --git a/drivers/video/via/via_aux_edid.c b/drivers/video/fbdev/via/via_aux_edid.c
index 754d4509033f..754d4509033f 100644
--- a/drivers/video/via/via_aux_edid.c
+++ b/drivers/video/fbdev/via/via_aux_edid.c
diff --git a/drivers/video/via/via_aux_sii164.c b/drivers/video/fbdev/via/via_aux_sii164.c
index ca1b35f033b1..ca1b35f033b1 100644
--- a/drivers/video/via/via_aux_sii164.c
+++ b/drivers/video/fbdev/via/via_aux_sii164.c
diff --git a/drivers/video/via/via_aux_vt1621.c b/drivers/video/fbdev/via/via_aux_vt1621.c
index 38eca8479898..38eca8479898 100644
--- a/drivers/video/via/via_aux_vt1621.c
+++ b/drivers/video/fbdev/via/via_aux_vt1621.c
diff --git a/drivers/video/via/via_aux_vt1622.c b/drivers/video/fbdev/via/via_aux_vt1622.c
index 8c79c68ba683..8c79c68ba683 100644
--- a/drivers/video/via/via_aux_vt1622.c
+++ b/drivers/video/fbdev/via/via_aux_vt1622.c
diff --git a/drivers/video/via/via_aux_vt1625.c b/drivers/video/fbdev/via/via_aux_vt1625.c
index 03eb30165d36..03eb30165d36 100644
--- a/drivers/video/via/via_aux_vt1625.c
+++ b/drivers/video/fbdev/via/via_aux_vt1625.c
diff --git a/drivers/video/via/via_aux_vt1631.c b/drivers/video/fbdev/via/via_aux_vt1631.c
index 06e742f1f723..06e742f1f723 100644
--- a/drivers/video/via/via_aux_vt1631.c
+++ b/drivers/video/fbdev/via/via_aux_vt1631.c
diff --git a/drivers/video/via/via_aux_vt1632.c b/drivers/video/fbdev/via/via_aux_vt1632.c
index d24f4cd97401..d24f4cd97401 100644
--- a/drivers/video/via/via_aux_vt1632.c
+++ b/drivers/video/fbdev/via/via_aux_vt1632.c
diff --git a/drivers/video/via/via_aux_vt1636.c b/drivers/video/fbdev/via/via_aux_vt1636.c
index 9e015c101d4d..9e015c101d4d 100644
--- a/drivers/video/via/via_aux_vt1636.c
+++ b/drivers/video/fbdev/via/via_aux_vt1636.c
diff --git a/drivers/video/via/via_clock.c b/drivers/video/fbdev/via/via_clock.c
index db1e39277e32..db1e39277e32 100644
--- a/drivers/video/via/via_clock.c
+++ b/drivers/video/fbdev/via/via_clock.c
diff --git a/drivers/video/via/via_clock.h b/drivers/video/fbdev/via/via_clock.h
index 88714ae0d157..88714ae0d157 100644
--- a/drivers/video/via/via_clock.h
+++ b/drivers/video/fbdev/via/via_clock.h
diff --git a/drivers/video/via/via_i2c.c b/drivers/video/fbdev/via/via_i2c.c
index dd53058bbbb7..dd53058bbbb7 100644
--- a/drivers/video/via/via_i2c.c
+++ b/drivers/video/fbdev/via/via_i2c.c
diff --git a/drivers/video/via/via_modesetting.c b/drivers/video/fbdev/via/via_modesetting.c
index 0b414b09b9b4..0b414b09b9b4 100644
--- a/drivers/video/via/via_modesetting.c
+++ b/drivers/video/fbdev/via/via_modesetting.c
diff --git a/drivers/video/via/via_modesetting.h b/drivers/video/fbdev/via/via_modesetting.h
index f6a6503da3b3..f6a6503da3b3 100644
--- a/drivers/video/via/via_modesetting.h
+++ b/drivers/video/fbdev/via/via_modesetting.h
diff --git a/drivers/video/via/via_utility.c b/drivers/video/fbdev/via/via_utility.c
index 35458a5eadc8..35458a5eadc8 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/fbdev/via/via_utility.c
diff --git a/drivers/video/via/via_utility.h b/drivers/video/fbdev/via/via_utility.h
index f23be1708c14..f23be1708c14 100644
--- a/drivers/video/via/via_utility.h
+++ b/drivers/video/fbdev/via/via_utility.h
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c
index 325c43c6ff97..325c43c6ff97 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/fbdev/via/viafbdev.c
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/fbdev/via/viafbdev.h
index f6b2ddf56e94..f6b2ddf56e94 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/fbdev/via/viafbdev.h
diff --git a/drivers/video/via/viamode.c b/drivers/video/fbdev/via/viamode.c
index 0666ab01cf4a..0666ab01cf4a 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/fbdev/via/viamode.c
diff --git a/drivers/video/via/viamode.h b/drivers/video/fbdev/via/viamode.h
index dd19106698e7..dd19106698e7 100644
--- a/drivers/video/via/viamode.h
+++ b/drivers/video/fbdev/via/viamode.h
diff --git a/drivers/video/via/vt1636.c b/drivers/video/fbdev/via/vt1636.c
index ee2903b472cf..ee2903b472cf 100644
--- a/drivers/video/via/vt1636.c
+++ b/drivers/video/fbdev/via/vt1636.c
diff --git a/drivers/video/via/vt1636.h b/drivers/video/fbdev/via/vt1636.h
index 4c1314e57468..4c1314e57468 100644
--- a/drivers/video/via/vt1636.h
+++ b/drivers/video/fbdev/via/vt1636.h
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/fbdev/vt8500lcdfb.c
index a8f2b280f796..a8f2b280f796 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/fbdev/vt8500lcdfb.c
diff --git a/drivers/video/vt8500lcdfb.h b/drivers/video/fbdev/vt8500lcdfb.h
index 36ca3ca09d83..36ca3ca09d83 100644
--- a/drivers/video/vt8500lcdfb.h
+++ b/drivers/video/fbdev/vt8500lcdfb.h
diff --git a/drivers/video/vt8623fb.c b/drivers/video/fbdev/vt8623fb.c
index 5c7cbc6c6236..5c7cbc6c6236 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/fbdev/vt8623fb.c
diff --git a/drivers/video/w100fb.c b/drivers/video/fbdev/w100fb.c
index 10951c82f6ed..10951c82f6ed 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/fbdev/w100fb.c
diff --git a/drivers/video/w100fb.h b/drivers/video/fbdev/w100fb.h
index fffae7b4f6e9..fffae7b4f6e9 100644
--- a/drivers/video/w100fb.h
+++ b/drivers/video/fbdev/w100fb.h
diff --git a/drivers/video/wm8505fb.c b/drivers/video/fbdev/wm8505fb.c
index 537d199612af..537d199612af 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/fbdev/wm8505fb.c
diff --git a/drivers/video/wm8505fb_regs.h b/drivers/video/fbdev/wm8505fb_regs.h
index 4dd41668c6d1..4dd41668c6d1 100644
--- a/drivers/video/wm8505fb_regs.h
+++ b/drivers/video/fbdev/wm8505fb_regs.h
diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/fbdev/wmt_ge_rops.c
index b0a9f34b2e01..9df6fe78a44b 100644
--- a/drivers/video/wmt_ge_rops.c
+++ b/drivers/video/fbdev/wmt_ge_rops.c
@@ -18,7 +18,7 @@
 #include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/platform_device.h>
-#include "fb_draw.h"
+#include "core/fb_draw.h"
 
 #define GE_COMMAND_OFF		0x00
 #define GE_DEPTH_OFF		0x04
diff --git a/drivers/video/wmt_ge_rops.h b/drivers/video/fbdev/wmt_ge_rops.h
index f73ec6377a46..f73ec6377a46 100644
--- a/drivers/video/wmt_ge_rops.h
+++ b/drivers/video/fbdev/wmt_ge_rops.h
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/fbdev/xen-fbfront.c
index 901014bbc821..901014bbc821 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/fbdev/xen-fbfront.c
diff --git a/drivers/video/xilinxfb.c b/drivers/video/fbdev/xilinxfb.c
index 553cff2f3f4c..553cff2f3f4c 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/fbdev/xilinxfb.c
diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
deleted file mode 100644
index 63b23f87081d..000000000000
--- a/drivers/video/omap2/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config OMAP2_VRFB
-	bool
-
-if ARCH_OMAP2PLUS
-
-source "drivers/video/omap2/dss/Kconfig"
-source "drivers/video/omap2/omapfb/Kconfig"
-source "drivers/video/omap2/displays-new/Kconfig"
-
-endif
diff --git a/drivers/vme/bridges/vme_tsi148.c b/drivers/vme/bridges/vme_tsi148.c
index 06990c6a1a69..61e706c0e00c 100644
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@@ -320,7 +320,7 @@ static int tsi148_irq_init(struct vme_bridge *tsi148_bridge)
 	struct pci_dev *pdev;
 	struct tsi148_driver *bridge;
 
-	pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev);
+	pdev = to_pci_dev(tsi148_bridge->parent);
 
 	bridge = tsi148_bridge->driver_priv;
 
@@ -433,9 +433,7 @@ static void tsi148_irq_set(struct vme_bridge *tsi148_bridge, int level,
 		iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
 
 		if (sync != 0) {
-			pdev = container_of(tsi148_bridge->parent,
-				struct pci_dev, dev);
-
+			pdev = to_pci_dev(tsi148_bridge->parent);
 			synchronize_irq(pdev->irq);
 		}
 	} else {
@@ -741,7 +739,7 @@ static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled,
 	reg_join(vme_bound_high, vme_bound_low, &vme_bound);
 	reg_join(pci_offset_high, pci_offset_low, &pci_offset);
 
-	*pci_base = (dma_addr_t)vme_base + pci_offset;
+	*pci_base = (dma_addr_t)(*vme_base + pci_offset);
 
 	*enabled = 0;
 	*aspace = 0;
@@ -814,7 +812,7 @@ static int tsi148_alloc_resource(struct vme_master_resource *image,
 
 	tsi148_bridge = image->parent;
 
-	pdev = container_of(tsi148_bridge->parent, struct pci_dev, dev);
+	pdev = to_pci_dev(tsi148_bridge->parent);
 
 	existing_size = (unsigned long long)(image->bus_resource.end -
 		image->bus_resource.start);
@@ -910,11 +908,15 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled,
 	unsigned long long pci_bound, vme_offset, pci_base;
 	struct vme_bridge *tsi148_bridge;
 	struct tsi148_driver *bridge;
+	struct pci_bus_region region;
+	struct pci_dev *pdev;
 
 	tsi148_bridge = image->parent;
 
 	bridge = tsi148_bridge->driver_priv;
 
+	pdev = to_pci_dev(tsi148_bridge->parent);
+
 	/* Verify input data */
 	if (vme_base & 0xFFFF) {
 		dev_err(tsi148_bridge->parent, "Invalid VME Window "
@@ -949,7 +951,9 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled,
 		pci_bound = 0;
 		vme_offset = 0;
 	} else {
-		pci_base = (unsigned long long)image->bus_resource.start;
+		pcibios_resource_to_bus(pdev->bus, &region,
+					&image->bus_resource);
+		pci_base = region.start;
 
 		/*
 		 * Bound address is a valid address for the window, adjust
@@ -2232,7 +2236,7 @@ static void *tsi148_alloc_consistent(struct device *parent, size_t size,
 	struct pci_dev *pdev;
 
 	/* Find pci_dev container of dev */
-	pdev = container_of(parent, struct pci_dev, dev);
+	pdev = to_pci_dev(parent);
 
 	return pci_alloc_consistent(pdev, size, dma);
 }
@@ -2243,7 +2247,7 @@ static void tsi148_free_consistent(struct device *parent, size_t size,
 	struct pci_dev *pdev;
 
 	/* Find pci_dev container of dev */
-	pdev = container_of(parent, struct pci_dev, dev);
+	pdev = to_pci_dev(parent);
 
 	pci_free_consistent(pdev, size, vaddr, dma);
 }
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index b96f61b15dc6..ff52618cafbe 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -614,27 +614,11 @@ end:
 	return err;
 }
 
-/*
- * Handle sysfs file creation and removal here, before userspace is told that
- * the device is added / removed from the system
- */
-static int w1_bus_notify(struct notifier_block *nb, unsigned long action,
-			 void *data)
+static int w1_family_notify(unsigned long action, struct w1_slave *sl)
 {
-	struct device *dev = data;
-	struct w1_slave *sl;
 	struct w1_family_ops *fops;
 	int err;
 
-	/*
-	 * Only care about slave devices at the moment.  Yes, we should use a
-	 * separate "type" for this, but for now, look at the release function
-	 * to know which type it is...
-	 */
-	if (dev->release != w1_slave_release)
-		return 0;
-
-	sl = dev_to_w1_slave(dev);
 	fops = sl->family->fops;
 
 	if (!fops)
@@ -673,10 +657,6 @@ static int w1_bus_notify(struct notifier_block *nb, unsigned long action,
 	return 0;
 }
 
-static struct notifier_block w1_bus_nb = {
-	.notifier_call = w1_bus_notify,
-};
-
 static int __w1_attach_slave_device(struct w1_slave *sl)
 {
 	int err;
@@ -698,6 +678,9 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
 	dev_dbg(&sl->dev, "%s: registering %s as %p.\n", __func__,
 		dev_name(&sl->dev), sl);
 
+	/* suppress for w1_family_notify before sending KOBJ_ADD */
+	dev_set_uevent_suppress(&sl->dev, true);
+
 	err = device_register(&sl->dev);
 	if (err < 0) {
 		dev_err(&sl->dev,
@@ -705,7 +688,7 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
 			dev_name(&sl->dev), err);
 		return err;
 	}
-
+	w1_family_notify(BUS_NOTIFY_ADD_DEVICE, sl);
 
 	dev_set_uevent_suppress(&sl->dev, false);
 	kobject_uevent(&sl->dev.kobj, KOBJ_ADD);
@@ -799,6 +782,7 @@ int w1_unref_slave(struct w1_slave *sl)
 		msg.type = W1_SLAVE_REMOVE;
 		w1_netlink_send(sl->master, &msg);
 
+		w1_family_notify(BUS_NOTIFY_DEL_DEVICE, sl);
 		device_unregister(&sl->dev);
 		#ifdef DEBUG
 		memset(sl, 0, sizeof(*sl));
@@ -1186,10 +1170,6 @@ static int __init w1_init(void)
 		goto err_out_exit_init;
 	}
 
-	retval = bus_register_notifier(&w1_bus_type, &w1_bus_nb);
-	if (retval)
-		goto err_out_bus_unregister;
-
 	retval = driver_register(&w1_master_driver);
 	if (retval) {
 		printk(KERN_ERR
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index 5234964fe001..a02704a59321 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -300,12 +300,6 @@ static int w1_process_command_root(struct cn_msg *msg,
 	struct w1_netlink_msg *w;
 	u32 *id;
 
-	if (mcmd->type != W1_LIST_MASTERS) {
-		printk(KERN_NOTICE "%s: msg: %x.%x, wrong type: %u, len: %u.\n",
-			__func__, msg->id.idx, msg->id.val, mcmd->type, mcmd->len);
-		return -EPROTO;
-	}
-
 	cn = kmalloc(PAGE_SIZE, GFP_KERNEL);
 	if (!cn)
 		return -ENOMEM;
@@ -441,6 +435,9 @@ static void w1_process_cb(struct w1_master *dev, struct w1_async_cmd *async_cmd)
 		w1_netlink_send_error(&node->block->msg, node->m, cmd,
 			node->block->portid, err);
 
+	/* ref taken in w1_search_slave or w1_search_master_id when building
+	 * the block
+	 */
 	if (sl)
 		w1_unref_slave(sl);
 	else
@@ -503,30 +500,42 @@ static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 
 	msg_len = msg->len;
 	while (msg_len && !err) {
-		struct w1_reg_num id;
-		u16 mlen = m->len;
 
 		dev = NULL;
 		sl = NULL;
 
-		memcpy(&id, m->id.id, sizeof(id));
-#if 0
-		printk("%s: %02x.%012llx.%02x: type=%02x, len=%u.\n",
-				__func__, id.family, (unsigned long long)id.id, id.crc, m->type, m->len);
-#endif
 		if (m->len + sizeof(struct w1_netlink_msg) > msg_len) {
 			err = -E2BIG;
 			break;
 		}
 
+		/* execute on this thread, no need to process later */
+		if (m->type == W1_LIST_MASTERS) {
+			err = w1_process_command_root(msg, m, nsp->portid);
+			goto out_cont;
+		}
+
+		/* All following message types require additional data,
+		 * check here before references are taken.
+		 */
+		if (!m->len) {
+			err = -EPROTO;
+			goto out_cont;
+		}
+
+		/* both search calls take reference counts */
 		if (m->type == W1_MASTER_CMD) {
 			dev = w1_search_master_id(m->id.mst.id);
 		} else if (m->type == W1_SLAVE_CMD) {
-			sl = w1_search_slave(&id);
+			sl = w1_search_slave((struct w1_reg_num *)m->id.id);
 			if (sl)
 				dev = sl->master;
 		} else {
-			err = w1_process_command_root(msg, m, nsp->portid);
+			printk(KERN_NOTICE
+				"%s: msg: %x.%x, wrong type: %u, len: %u.\n",
+				__func__, msg->id.idx, msg->id.val,
+				m->type, m->len);
+			err = -EPROTO;
 			goto out_cont;
 		}
 
@@ -536,8 +545,6 @@ static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 		}
 
 		err = 0;
-		if (!mlen)
-			goto out_cont;
 
 		atomic_inc(&block->refcnt);
 		node->async.cb = w1_process_cb;
@@ -557,7 +564,8 @@ out_cont:
 		if (err)
 			w1_netlink_send_error(msg, m, NULL, nsp->portid, err);
 		msg_len -= sizeof(struct w1_netlink_msg) + m->len;
-		m = (struct w1_netlink_msg *)(((u8 *)m) + sizeof(struct w1_netlink_msg) + m->len);
+		m = (struct w1_netlink_msg *)(((u8 *)m) +
+			sizeof(struct w1_netlink_msg) + m->len);
 
 		/*
 		 * Let's allow requests for nonexisting devices.
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index fc6c94c0b436..32f9236c959f 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -198,10 +198,32 @@ struct shutdown_handler {
 	void (*cb)(void);
 };
 
+static int poweroff_nb(struct notifier_block *cb, unsigned long code, void *unused)
+{
+	switch (code) {
+	case SYS_DOWN:
+	case SYS_HALT:
+	case SYS_POWER_OFF:
+		shutting_down = SHUTDOWN_POWEROFF;
+	default:
+		break;
+	}
+	return NOTIFY_DONE;
+}
 static void do_poweroff(void)
 {
-	shutting_down = SHUTDOWN_POWEROFF;
-	orderly_poweroff(false);
+	switch (system_state) {
+	case SYSTEM_BOOTING:
+		orderly_poweroff(true);
+		break;
+	case SYSTEM_RUNNING:
+		orderly_poweroff(false);
+		break;
+	default:
+		/* Don't do it when we are halting/rebooting. */
+		pr_info("Ignoring Xen toolstack shutdown.\n");
+		break;
+	}
 }
 
 static void do_reboot(void)
@@ -307,6 +329,10 @@ static struct xenbus_watch shutdown_watch = {
 	.callback = shutdown_handler
 };
 
+static struct notifier_block xen_reboot_nb = {
+	.notifier_call = poweroff_nb,
+};
+
 static int setup_shutdown_watcher(void)
 {
 	int err;
@@ -317,6 +343,7 @@ static int setup_shutdown_watcher(void)
 		return err;
 	}
 
+
 #ifdef CONFIG_MAGIC_SYSRQ
 	err = register_xenbus_watch(&sysrq_watch);
 	if (err) {
@@ -345,6 +372,7 @@ int xen_setup_shutdown_event(void)
 	if (!xen_domain())
 		return -ENODEV;
 	register_xenstore_notifier(&xenstore_notifier);
+	register_reboot_notifier(&xen_reboot_nb);
 
 	return 0;
 }
diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 929dd46bb40c..607e41460c0d 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -217,7 +217,7 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
 	if (result == 0) {
 		for (i = 0; i < op->value; i++) {
 			op->msix_entries[i].entry = entries[i].entry;
-			if (entries[i].vector)
+			if (entries[i].vector) {
 				op->msix_entries[i].vector =
 					xen_pirq_from_irq(entries[i].vector);
 				if (unlikely(verbose_request))
@@ -225,6 +225,7 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
 						"MSI-X[%d]: %d\n",
 						pci_name(dev), i,
 						op->msix_entries[i].vector);
+			}
 		}
 	} else
 		pr_warn_ratelimited("%s: error enabling MSI-X for guest %u: err %d!\n",
diff --git a/drivers/xen/xen-pciback/vpci.c b/drivers/xen/xen-pciback/vpci.c
index 3165ce361b00..51afff96c515 100644
--- a/drivers/xen/xen-pciback/vpci.c
+++ b/drivers/xen/xen-pciback/vpci.c
@@ -137,6 +137,8 @@ unlock:
 	/* Publish this device. */
 	if (!err)
 		err = publish_cb(pdev, 0, 0, PCI_DEVFN(slot, func), devid);
+	else
+		kfree(dev_entry);
 
 out:
 	return err;
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index b6d5fff43d16..ba804f3d8278 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -50,6 +50,7 @@
 #include <xen/xenbus.h>
 #include <xen/xen.h>
 #include "xenbus_comms.h"
+#include "xenbus_probe.h"
 
 struct xs_stored_msg {
 	struct list_head list;
@@ -139,6 +140,29 @@ static int get_error(const char *errorstring)
 	return xsd_errors[i].errnum;
 }
 
+static bool xenbus_ok(void)
+{
+	switch (xen_store_domain_type) {
+	case XS_LOCAL:
+		switch (system_state) {
+		case SYSTEM_POWER_OFF:
+		case SYSTEM_RESTART:
+		case SYSTEM_HALT:
+			return false;
+		default:
+			break;
+		}
+		return true;
+	case XS_PV:
+	case XS_HVM:
+		/* FIXME: Could check that the remote domain is alive,
+		 * but it is normally initial domain. */
+		return true;
+	default:
+		break;
+	}
+	return false;
+}
 static void *read_reply(enum xsd_sockmsg_type *type, unsigned int *len)
 {
 	struct xs_stored_msg *msg;
@@ -148,9 +172,20 @@ static void *read_reply(enum xsd_sockmsg_type *type, unsigned int *len)
 
 	while (list_empty(&xs_state.reply_list)) {
 		spin_unlock(&xs_state.reply_lock);
-		/* XXX FIXME: Avoid synchronous wait for response here. */
-		wait_event(xs_state.reply_waitq,
-			   !list_empty(&xs_state.reply_list));
+		if (xenbus_ok())
+			/* XXX FIXME: Avoid synchronous wait for response here. */
+			wait_event_timeout(xs_state.reply_waitq,
+					   !list_empty(&xs_state.reply_list),
+					   msecs_to_jiffies(500));
+		else {
+			/*
+			 * If we are in the process of being shut-down there is
+			 * no point of trying to contact XenBus - it is either
+			 * killed (xenstored application) or the other domain
+			 * has been killed or is unreachable.
+			 */
+			return ERR_PTR(-EIO);
+		}
 		spin_lock(&xs_state.reply_lock);
 	}
 
@@ -215,6 +250,9 @@ void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg)
 
 	mutex_unlock(&xs_state.request_mutex);
 
+	if (IS_ERR(ret))
+		return ret;
+
 	if ((msg->type == XS_TRANSACTION_END) ||
 	    ((req_msg.type == XS_TRANSACTION_START) &&
 	     (msg->type == XS_ERROR)))