diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/input/joystick/adi.c | 2 | ||||
| -rw-r--r-- | drivers/input/joystick/xpad.c | 10 | ||||
| -rw-r--r-- | drivers/input/misc/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/input/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/misc/pwm-vibra.c | 267 | ||||
| -rw-r--r-- | drivers/input/mouse/elantech.c | 8 | ||||
| -rw-r--r-- | drivers/input/serio/i8042-x86ia64io.h | 7 | ||||
| -rw-r--r-- | drivers/input/touchscreen/edt-ft5x06.c | 3 | ||||
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 9 | ||||
| -rw-r--r-- | drivers/input/touchscreen/surface3_spi.c | 2 | ||||
| -rw-r--r-- | drivers/input/touchscreen/ucb1400_ts.c | 4 |
11 files changed, 314 insertions, 11 deletions
diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c index d09cefa37931..15a71acb6997 100644 --- a/drivers/input/joystick/adi.c +++ b/drivers/input/joystick/adi.c @@ -313,7 +313,7 @@ static void adi_close(struct input_dev *dev) static void adi_init_digital(struct gameport *gameport) { - int seq[] = { 4, -2, -3, 10, -6, -11, -7, -9, 11, 0 }; + static const int seq[] = { 4, -2, -3, 10, -6, -11, -7, -9, 11, 0 }; int i; for (i = 0; seq[i]; i++) { diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index f8e34ef643c7..d86e59515b9c 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1764,10 +1764,12 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id struct usb_endpoint_descriptor *ep = &intf->cur_altsetting->endpoint[i].desc; - if (usb_endpoint_dir_in(ep)) - ep_irq_in = ep; - else - ep_irq_out = ep; + if (usb_endpoint_xfer_int(ep)) { + if (usb_endpoint_dir_in(ep)) + ep_irq_in = ep; + else + ep_irq_out = ep; + } } if (!ep_irq_in || !ep_irq_out) { diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index f47e836eaa0f..9f082a388388 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -581,6 +581,18 @@ config INPUT_PWM_BEEPER To compile this driver as a module, choose M here: the module will be called pwm-beeper. +config INPUT_PWM_VIBRA + tristate "PWM vibrator support" + depends on PWM + select INPUT_FF_MEMLESS + help + Say Y here to get support for PWM based vibrator devices. + + If unsure, say N. + + To compile this driver as a module, choose M here: the module will be + called pwm-vibra. + config INPUT_RK805_PWRKEY tristate "Rockchip RK805 PMIC power key support" depends on MFD_RK808 diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 1072e0760c19..03fd4262ada9 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o +obj-$(CONFIG_INPUT_PWM_VIBRA) += pwm-vibra.o obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c new file mode 100644 index 000000000000..55da191ae550 --- /dev/null +++ b/drivers/input/misc/pwm-vibra.c @@ -0,0 +1,267 @@ +/* + * PWM vibrator driver + * + * Copyright (C) 2017 Collabora Ltd. + * + * Based on previous work from: + * Copyright (C) 2012 Dmitry Torokhov <dmitry.torokhov@gmail.com> + * + * Based on PWM beeper driver: + * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/pwm.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +struct pwm_vibrator { + struct input_dev *input; + struct pwm_device *pwm; + struct pwm_device *pwm_dir; + struct regulator *vcc; + + struct work_struct play_work; + u16 level; + u32 direction_duty_cycle; +}; + +static int pwm_vibrator_start(struct pwm_vibrator *vibrator) +{ + struct device *pdev = vibrator->input->dev.parent; + struct pwm_state state; + int err; + + err = regulator_enable(vibrator->vcc); + if (err) { + dev_err(pdev, "failed to enable regulator: %d", err); + return err; + } + + pwm_get_state(vibrator->pwm, &state); + pwm_set_relative_duty_cycle(&state, vibrator->level, 0xffff); + state.enabled = true; + + err = pwm_apply_state(vibrator->pwm, &state); + if (err) { + dev_err(pdev, "failed to apply pwm state: %d", err); + return err; + } + + if (vibrator->pwm_dir) { + pwm_get_state(vibrator->pwm_dir, &state); + state.duty_cycle = vibrator->direction_duty_cycle; + state.enabled = true; + + err = pwm_apply_state(vibrator->pwm_dir, &state); + if (err) { + dev_err(pdev, "failed to apply dir-pwm state: %d", err); + pwm_disable(vibrator->pwm); + return err; + } + } + + return 0; +} + +static void pwm_vibrator_stop(struct pwm_vibrator *vibrator) +{ + regulator_disable(vibrator->vcc); + + if (vibrator->pwm_dir) + pwm_disable(vibrator->pwm_dir); + pwm_disable(vibrator->pwm); +} + +static void pwm_vibrator_play_work(struct work_struct *work) +{ + struct pwm_vibrator *vibrator = container_of(work, + struct pwm_vibrator, play_work); + + if (vibrator->level) + pwm_vibrator_start(vibrator); + else + pwm_vibrator_stop(vibrator); +} + +static int pwm_vibrator_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct pwm_vibrator *vibrator = input_get_drvdata(dev); + + vibrator->level = effect->u.rumble.strong_magnitude; + if (!vibrator->level) + vibrator->level = effect->u.rumble.weak_magnitude; + + schedule_work(&vibrator->play_work); + + return 0; +} + +static void pwm_vibrator_close(struct input_dev *input) +{ + struct pwm_vibrator *vibrator = input_get_drvdata(input); + + cancel_work_sync(&vibrator->play_work); + pwm_vibrator_stop(vibrator); +} + +static int pwm_vibrator_probe(struct platform_device *pdev) +{ + struct pwm_vibrator *vibrator; + struct pwm_state state; + int err; + + vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL); + if (!vibrator) + return -ENOMEM; + + vibrator->input = devm_input_allocate_device(&pdev->dev); + if (!vibrator->input) + return -ENOMEM; + + vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc"); + err = PTR_ERR_OR_ZERO(vibrator->vcc); + if (err) { + if (err != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to request regulator: %d", + err); + return err; + } + + vibrator->pwm = devm_pwm_get(&pdev->dev, "enable"); + err = PTR_ERR_OR_ZERO(vibrator->pwm); + if (err) { + if (err != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to request main pwm: %d", + err); + return err; + } + + INIT_WORK(&vibrator->play_work, pwm_vibrator_play_work); + + /* Sync up PWM state and ensure it is off. */ + pwm_init_state(vibrator->pwm, &state); + state.enabled = false; + err = pwm_apply_state(vibrator->pwm, &state); + if (err) { + dev_err(&pdev->dev, "failed to apply initial PWM state: %d", + err); + return err; + } + + vibrator->pwm_dir = devm_pwm_get(&pdev->dev, "direction"); + err = PTR_ERR_OR_ZERO(vibrator->pwm_dir); + switch (err) { + case 0: + /* Sync up PWM state and ensure it is off. */ + pwm_init_state(vibrator->pwm_dir, &state); + state.enabled = false; + err = pwm_apply_state(vibrator->pwm_dir, &state); + if (err) { + dev_err(&pdev->dev, "failed to apply initial PWM state: %d", + err); + return err; + } + + vibrator->direction_duty_cycle = + pwm_get_period(vibrator->pwm_dir) / 2; + device_property_read_u32(&pdev->dev, "direction-duty-cycle-ns", + &vibrator->direction_duty_cycle); + break; + + case -ENODATA: + /* Direction PWM is optional */ + vibrator->pwm_dir = NULL; + break; + + default: + dev_err(&pdev->dev, "Failed to request direction pwm: %d", err); + /* Fall through */ + + case -EPROBE_DEFER: + return err; + } + + vibrator->input->name = "pwm-vibrator"; + vibrator->input->id.bustype = BUS_HOST; + vibrator->input->dev.parent = &pdev->dev; + vibrator->input->close = pwm_vibrator_close; + + input_set_drvdata(vibrator->input, vibrator); + input_set_capability(vibrator->input, EV_FF, FF_RUMBLE); + + err = input_ff_create_memless(vibrator->input, NULL, + pwm_vibrator_play_effect); + if (err) { + dev_err(&pdev->dev, "Couldn't create FF dev: %d", err); + return err; + } + + err = input_register_device(vibrator->input); + if (err) { + dev_err(&pdev->dev, "Couldn't register input dev: %d", err); + return err; + } + + platform_set_drvdata(pdev, vibrator); + + return 0; +} + +static int __maybe_unused pwm_vibrator_suspend(struct device *dev) +{ + struct pwm_vibrator *vibrator = dev_get_drvdata(dev); + + cancel_work_sync(&vibrator->play_work); + if (vibrator->level) + pwm_vibrator_stop(vibrator); + + return 0; +} + +static int __maybe_unused pwm_vibrator_resume(struct device *dev) +{ + struct pwm_vibrator *vibrator = dev_get_drvdata(dev); + + if (vibrator->level) + pwm_vibrator_start(vibrator); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(pwm_vibrator_pm_ops, + pwm_vibrator_suspend, pwm_vibrator_resume); + +#ifdef CONFIG_OF +static const struct of_device_id pwm_vibra_dt_match_table[] = { + { .compatible = "pwm-vibrator" }, + {}, +}; +MODULE_DEVICE_TABLE(of, pwm_vibra_dt_match_table); +#endif + +static struct platform_driver pwm_vibrator_driver = { + .probe = pwm_vibrator_probe, + .driver = { + .name = "pwm-vibrator", + .pm = &pwm_vibrator_pm_ops, + .of_match_table = of_match_ptr(pwm_vibra_dt_match_table), + }, +}; +module_platform_driver(pwm_vibrator_driver); + +MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>"); +MODULE_DESCRIPTION("PWM vibrator driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pwm-vibrator"); diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 6428d6f4d568..b84cd978fce2 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -700,7 +700,9 @@ static int elantech_debounce_check_v2(struct psmouse *psmouse) * When we encounter packet that matches this exactly, it means the * hardware is in debounce status. Just ignore the whole packet. */ - const u8 debounce_packet[] = { 0x84, 0xff, 0xff, 0x02, 0xff, 0xff }; + static const u8 debounce_packet[] = { + 0x84, 0xff, 0xff, 0x02, 0xff, 0xff + }; unsigned char *packet = psmouse->packet; return !memcmp(packet, debounce_packet, sizeof(debounce_packet)); @@ -741,7 +743,9 @@ static int elantech_packet_check_v2(struct psmouse *psmouse) static int elantech_packet_check_v3(struct psmouse *psmouse) { struct elantech_data *etd = psmouse->private; - const u8 debounce_packet[] = { 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff }; + static const u8 debounce_packet[] = { + 0xc4, 0xff, 0xff, 0x02, 0xff, 0xff + }; unsigned char *packet = psmouse->packet; /* diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index ae81e57e13b9..6cbbdc6e9687 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -840,6 +840,13 @@ static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = { }, }, { + /* Gigabyte P57 - Elantech touchpad */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), + DMI_MATCH(DMI_PRODUCT_NAME, "P57"), + }, + }, + { /* Schenker XMG C504 - Elantech touchpad */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "XMG"), diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index f872817e81e4..5bf63f76ddda 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -593,7 +593,7 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata) tsdata->gain); edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, tsdata->offset); - if (reg_addr->reg_report_rate) + if (reg_addr->reg_report_rate != NO_REGISTER) edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate, tsdata->report_rate); @@ -874,6 +874,7 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) case M09: reg_addr->reg_threshold = M09_REGISTER_THRESHOLD; + reg_addr->reg_report_rate = NO_REGISTER; reg_addr->reg_gain = M09_REGISTER_GAIN; reg_addr->reg_offset = M09_REGISTER_OFFSET; reg_addr->reg_num_x = M09_REGISTER_NUM_X; diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 240b16f3ee97..32d2762448aa 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -267,6 +267,12 @@ static void goodix_process_events(struct goodix_ts_data *ts) if (touch_num < 0) return; + /* + * Bit 4 of the first byte reports the status of the capacitive + * Windows/Home button. + */ + input_report_key(ts->input_dev, KEY_LEFTMETA, point_data[0] & BIT(4)); + for (i = 0; i < touch_num; i++) goodix_ts_report_touch(ts, &point_data[1 + GOODIX_CONTACT_SIZE * i]); @@ -612,6 +618,9 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts) ts->input_dev->id.product = ts->id; ts->input_dev->id.version = ts->version; + /* Capacitive Windows/Home button on some devices */ + input_set_capability(ts->input_dev, EV_KEY, KEY_LEFTMETA); + error = input_register_device(ts->input_dev); if (error) { dev_err(&ts->client->dev, diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c index e12fb9b63f31..5db0f1c4ef38 100644 --- a/drivers/input/touchscreen/surface3_spi.c +++ b/drivers/input/touchscreen/surface3_spi.c @@ -173,7 +173,7 @@ static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data) static void surface3_spi_process(struct surface3_ts_data *ts_data) { - const char header[] = { + static const char header[] = { 0xff, 0xff, 0xff, 0xff, 0xa5, 0x5a, 0xe7, 0x7e, 0x01 }; u8 *data = ts_data->rd_buf; diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index c1e23cfc6155..1a86cbd9326f 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -414,7 +414,7 @@ static int __maybe_unused ucb1400_ts_suspend(struct device *dev) mutex_lock(&idev->mutex); if (idev->users) - ucb1400_ts_start(ucb); + ucb1400_ts_stop(ucb); mutex_unlock(&idev->mutex); return 0; @@ -428,7 +428,7 @@ static int __maybe_unused ucb1400_ts_resume(struct device *dev) mutex_lock(&idev->mutex); if (idev->users) - ucb1400_ts_stop(ucb); + ucb1400_ts_start(ucb); mutex_unlock(&idev->mutex); return 0; |