52 files changed, 146 insertions, 2920 deletions

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 8d6cd5d08722..a7ec388e1848 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -107,6 +107,8 @@ source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"
 
+source "drivers/ufs/Kconfig"
+
 source "drivers/memstick/Kconfig"
 
 source "drivers/leds/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 020780b6b4d2..8b4b90202e58 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -128,6 +128,7 @@ obj-$(CONFIG_PM_OPP)		+= opp/
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
 obj-y				+= mmc/
+obj-y				+= ufs/
 obj-$(CONFIG_MEMSTICK)		+= memstick/
 obj-$(CONFIG_NEW_LEDS)		+= leds/
 obj-$(CONFIG_INFINIBAND)	+= infiniband/
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 6e3a04107bb6..a9fe5152addd 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -500,7 +500,6 @@ source "drivers/scsi/megaraid/Kconfig.megaraid"
 source "drivers/scsi/mpt3sas/Kconfig"
 source "drivers/scsi/mpi3mr/Kconfig"
 source "drivers/scsi/smartpqi/Kconfig"
-source "drivers/scsi/ufs/Kconfig"
 
 config SCSI_HPTIOP
 	tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 19814c26c908..2ad3bc052531 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -101,7 +101,6 @@ obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/
 obj-$(CONFIG_SCSI_MPT3SAS)	+= mpt3sas/
 obj-$(CONFIG_SCSI_MPI3MR)	+= mpi3mr/
-obj-$(CONFIG_SCSI_UFSHCD)	+= ufs/
 obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o
 obj-$(CONFIG_SCSI_SUNESP)	+= esp_scsi.o	sun_esp.o
 obj-$(CONFIG_SCSI_INITIO)	+= initio.o
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
deleted file mode 100644
index 1bba3fead2ce..000000000000
--- a/drivers/scsi/ufs/ufs.h
+++ /dev/null
@@ -1,623 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Universal Flash Storage Host controller driver
- * Copyright (C) 2011-2013 Samsung India Software Operations
- *
- * Authors:
- *	Santosh Yaraganavi <santosh.sy@samsung.com>
- *	Vinayak Holikatti <h.vinayak@samsung.com>
- */
-
-#ifndef _UFS_H
-#define _UFS_H
-
-#include <linux/mutex.h>
-#include <linux/types.h>
-#include <uapi/scsi/scsi_bsg_ufs.h>
-
-#define GENERAL_UPIU_REQUEST_SIZE (sizeof(struct utp_upiu_req))
-#define QUERY_DESC_MAX_SIZE       255
-#define QUERY_DESC_MIN_SIZE       2
-#define QUERY_DESC_HDR_SIZE       2
-#define QUERY_OSF_SIZE            (GENERAL_UPIU_REQUEST_SIZE - \
-					(sizeof(struct utp_upiu_header)))
-#define UFS_SENSE_SIZE	18
-
-#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
-			cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
-			 (byte1 << 8) | (byte0))
-/*
- * UFS device may have standard LUs and LUN id could be from 0x00 to
- * 0x7F. Standard LUs use "Peripheral Device Addressing Format".
- * UFS device may also have the Well Known LUs (also referred as W-LU)
- * which again could be from 0x00 to 0x7F. For W-LUs, device only use
- * the "Extended Addressing Format" which means the W-LUNs would be
- * from 0xc100 (SCSI_W_LUN_BASE) onwards.
- * This means max. LUN number reported from UFS device could be 0xC17F.
- */
-#define UFS_UPIU_MAX_UNIT_NUM_ID	0x7F
-#define UFS_MAX_LUNS		(SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID)
-#define UFS_UPIU_WLUN_ID	(1 << 7)
-#define UFS_RPMB_UNIT		0xC4
-
-/* WriteBooster buffer is available only for the logical unit from 0 to 7 */
-#define UFS_UPIU_MAX_WB_LUN_ID	8
-
-/*
- * WriteBooster buffer lifetime has a limit setted by vendor.
- * If it is over the limit, WriteBooster feature will be disabled.
- */
-#define UFS_WB_EXCEED_LIFETIME		0x0B
-
-/* Well known logical unit id in LUN field of UPIU */
-enum {
-	UFS_UPIU_REPORT_LUNS_WLUN	= 0x81,
-	UFS_UPIU_UFS_DEVICE_WLUN	= 0xD0,
-	UFS_UPIU_BOOT_WLUN		= 0xB0,
-	UFS_UPIU_RPMB_WLUN		= 0xC4,
-};
-
-/*
- * UFS Protocol Information Unit related definitions
- */
-
-/* Task management functions */
-enum {
-	UFS_ABORT_TASK		= 0x01,
-	UFS_ABORT_TASK_SET	= 0x02,
-	UFS_CLEAR_TASK_SET	= 0x04,
-	UFS_LOGICAL_RESET	= 0x08,
-	UFS_QUERY_TASK		= 0x80,
-	UFS_QUERY_TASK_SET	= 0x81,
-};
-
-/* UTP UPIU Transaction Codes Initiator to Target */
-enum {
-	UPIU_TRANSACTION_NOP_OUT	= 0x00,
-	UPIU_TRANSACTION_COMMAND	= 0x01,
-	UPIU_TRANSACTION_DATA_OUT	= 0x02,
-	UPIU_TRANSACTION_TASK_REQ	= 0x04,
-	UPIU_TRANSACTION_QUERY_REQ	= 0x16,
-};
-
-/* UTP UPIU Transaction Codes Target to Initiator */
-enum {
-	UPIU_TRANSACTION_NOP_IN		= 0x20,
-	UPIU_TRANSACTION_RESPONSE	= 0x21,
-	UPIU_TRANSACTION_DATA_IN	= 0x22,
-	UPIU_TRANSACTION_TASK_RSP	= 0x24,
-	UPIU_TRANSACTION_READY_XFER	= 0x31,
-	UPIU_TRANSACTION_QUERY_RSP	= 0x36,
-	UPIU_TRANSACTION_REJECT_UPIU	= 0x3F,
-};
-
-/* UPIU Read/Write flags */
-enum {
-	UPIU_CMD_FLAGS_NONE	= 0x00,
-	UPIU_CMD_FLAGS_WRITE	= 0x20,
-	UPIU_CMD_FLAGS_READ	= 0x40,
-};
-
-/* UPIU Task Attributes */
-enum {
-	UPIU_TASK_ATTR_SIMPLE	= 0x00,
-	UPIU_TASK_ATTR_ORDERED	= 0x01,
-	UPIU_TASK_ATTR_HEADQ	= 0x02,
-	UPIU_TASK_ATTR_ACA	= 0x03,
-};
-
-/* UPIU Query request function */
-enum {
-	UPIU_QUERY_FUNC_STANDARD_READ_REQUEST           = 0x01,
-	UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST          = 0x81,
-};
-
-/* Flag idn for Query Requests*/
-enum flag_idn {
-	QUERY_FLAG_IDN_FDEVICEINIT			= 0x01,
-	QUERY_FLAG_IDN_PERMANENT_WPE			= 0x02,
-	QUERY_FLAG_IDN_PWR_ON_WPE			= 0x03,
-	QUERY_FLAG_IDN_BKOPS_EN				= 0x04,
-	QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE		= 0x05,
-	QUERY_FLAG_IDN_PURGE_ENABLE			= 0x06,
-	QUERY_FLAG_IDN_RESERVED2			= 0x07,
-	QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL		= 0x08,
-	QUERY_FLAG_IDN_BUSY_RTC				= 0x09,
-	QUERY_FLAG_IDN_RESERVED3			= 0x0A,
-	QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE	= 0x0B,
-	QUERY_FLAG_IDN_WB_EN                            = 0x0E,
-	QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN                 = 0x0F,
-	QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8     = 0x10,
-	QUERY_FLAG_IDN_HPB_RESET                        = 0x11,
-	QUERY_FLAG_IDN_HPB_EN				= 0x12,
-};
-
-/* Attribute idn for Query requests */
-enum attr_idn {
-	QUERY_ATTR_IDN_BOOT_LU_EN		= 0x00,
-	QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD	= 0x01,
-	QUERY_ATTR_IDN_POWER_MODE		= 0x02,
-	QUERY_ATTR_IDN_ACTIVE_ICC_LVL		= 0x03,
-	QUERY_ATTR_IDN_OOO_DATA_EN		= 0x04,
-	QUERY_ATTR_IDN_BKOPS_STATUS		= 0x05,
-	QUERY_ATTR_IDN_PURGE_STATUS		= 0x06,
-	QUERY_ATTR_IDN_MAX_DATA_IN		= 0x07,
-	QUERY_ATTR_IDN_MAX_DATA_OUT		= 0x08,
-	QUERY_ATTR_IDN_DYN_CAP_NEEDED		= 0x09,
-	QUERY_ATTR_IDN_REF_CLK_FREQ		= 0x0A,
-	QUERY_ATTR_IDN_CONF_DESC_LOCK		= 0x0B,
-	QUERY_ATTR_IDN_MAX_NUM_OF_RTT		= 0x0C,
-	QUERY_ATTR_IDN_EE_CONTROL		= 0x0D,
-	QUERY_ATTR_IDN_EE_STATUS		= 0x0E,
-	QUERY_ATTR_IDN_SECONDS_PASSED		= 0x0F,
-	QUERY_ATTR_IDN_CNTX_CONF		= 0x10,
-	QUERY_ATTR_IDN_CORR_PRG_BLK_NUM		= 0x11,
-	QUERY_ATTR_IDN_RESERVED2		= 0x12,
-	QUERY_ATTR_IDN_RESERVED3		= 0x13,
-	QUERY_ATTR_IDN_FFU_STATUS		= 0x14,
-	QUERY_ATTR_IDN_PSA_STATE		= 0x15,
-	QUERY_ATTR_IDN_PSA_DATA_SIZE		= 0x16,
-	QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME	= 0x17,
-	QUERY_ATTR_IDN_CASE_ROUGH_TEMP          = 0x18,
-	QUERY_ATTR_IDN_HIGH_TEMP_BOUND          = 0x19,
-	QUERY_ATTR_IDN_LOW_TEMP_BOUND           = 0x1A,
-	QUERY_ATTR_IDN_WB_FLUSH_STATUS	        = 0x1C,
-	QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE       = 0x1D,
-	QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST    = 0x1E,
-	QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE        = 0x1F,
-};
-
-/* Descriptor idn for Query requests */
-enum desc_idn {
-	QUERY_DESC_IDN_DEVICE		= 0x0,
-	QUERY_DESC_IDN_CONFIGURATION	= 0x1,
-	QUERY_DESC_IDN_UNIT		= 0x2,
-	QUERY_DESC_IDN_RFU_0		= 0x3,
-	QUERY_DESC_IDN_INTERCONNECT	= 0x4,
-	QUERY_DESC_IDN_STRING		= 0x5,
-	QUERY_DESC_IDN_RFU_1		= 0x6,
-	QUERY_DESC_IDN_GEOMETRY		= 0x7,
-	QUERY_DESC_IDN_POWER		= 0x8,
-	QUERY_DESC_IDN_HEALTH           = 0x9,
-	QUERY_DESC_IDN_MAX,
-};
-
-enum desc_header_offset {
-	QUERY_DESC_LENGTH_OFFSET	= 0x00,
-	QUERY_DESC_DESC_TYPE_OFFSET	= 0x01,
-};
-
-/* Unit descriptor parameters offsets in bytes*/
-enum unit_desc_param {
-	UNIT_DESC_PARAM_LEN			= 0x0,
-	UNIT_DESC_PARAM_TYPE			= 0x1,
-	UNIT_DESC_PARAM_UNIT_INDEX		= 0x2,
-	UNIT_DESC_PARAM_LU_ENABLE		= 0x3,
-	UNIT_DESC_PARAM_BOOT_LUN_ID		= 0x4,
-	UNIT_DESC_PARAM_LU_WR_PROTECT		= 0x5,
-	UNIT_DESC_PARAM_LU_Q_DEPTH		= 0x6,
-	UNIT_DESC_PARAM_PSA_SENSITIVE		= 0x7,
-	UNIT_DESC_PARAM_MEM_TYPE		= 0x8,
-	UNIT_DESC_PARAM_DATA_RELIABILITY	= 0x9,
-	UNIT_DESC_PARAM_LOGICAL_BLK_SIZE	= 0xA,
-	UNIT_DESC_PARAM_LOGICAL_BLK_COUNT	= 0xB,
-	UNIT_DESC_PARAM_ERASE_BLK_SIZE		= 0x13,
-	UNIT_DESC_PARAM_PROVISIONING_TYPE	= 0x17,
-	UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT	= 0x18,
-	UNIT_DESC_PARAM_CTX_CAPABILITIES	= 0x20,
-	UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1	= 0x22,
-	UNIT_DESC_PARAM_HPB_LU_MAX_ACTIVE_RGNS	= 0x23,
-	UNIT_DESC_PARAM_HPB_PIN_RGN_START_OFF	= 0x25,
-	UNIT_DESC_PARAM_HPB_NUM_PIN_RGNS	= 0x27,
-	UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS	= 0x29,
-};
-
-/* Device descriptor parameters offsets in bytes*/
-enum device_desc_param {
-	DEVICE_DESC_PARAM_LEN			= 0x0,
-	DEVICE_DESC_PARAM_TYPE			= 0x1,
-	DEVICE_DESC_PARAM_DEVICE_TYPE		= 0x2,
-	DEVICE_DESC_PARAM_DEVICE_CLASS		= 0x3,
-	DEVICE_DESC_PARAM_DEVICE_SUB_CLASS	= 0x4,
-	DEVICE_DESC_PARAM_PRTCL			= 0x5,
-	DEVICE_DESC_PARAM_NUM_LU		= 0x6,
-	DEVICE_DESC_PARAM_NUM_WLU		= 0x7,
-	DEVICE_DESC_PARAM_BOOT_ENBL		= 0x8,
-	DEVICE_DESC_PARAM_DESC_ACCSS_ENBL	= 0x9,
-	DEVICE_DESC_PARAM_INIT_PWR_MODE		= 0xA,
-	DEVICE_DESC_PARAM_HIGH_PR_LUN		= 0xB,
-	DEVICE_DESC_PARAM_SEC_RMV_TYPE		= 0xC,
-	DEVICE_DESC_PARAM_SEC_LU		= 0xD,
-	DEVICE_DESC_PARAM_BKOP_TERM_LT		= 0xE,
-	DEVICE_DESC_PARAM_ACTVE_ICC_LVL		= 0xF,
-	DEVICE_DESC_PARAM_SPEC_VER		= 0x10,
-	DEVICE_DESC_PARAM_MANF_DATE		= 0x12,
-	DEVICE_DESC_PARAM_MANF_NAME		= 0x14,
-	DEVICE_DESC_PARAM_PRDCT_NAME		= 0x15,
-	DEVICE_DESC_PARAM_SN			= 0x16,
-	DEVICE_DESC_PARAM_OEM_ID		= 0x17,
-	DEVICE_DESC_PARAM_MANF_ID		= 0x18,
-	DEVICE_DESC_PARAM_UD_OFFSET		= 0x1A,
-	DEVICE_DESC_PARAM_UD_LEN		= 0x1B,
-	DEVICE_DESC_PARAM_RTT_CAP		= 0x1C,
-	DEVICE_DESC_PARAM_FRQ_RTC		= 0x1D,
-	DEVICE_DESC_PARAM_UFS_FEAT		= 0x1F,
-	DEVICE_DESC_PARAM_FFU_TMT		= 0x20,
-	DEVICE_DESC_PARAM_Q_DPTH		= 0x21,
-	DEVICE_DESC_PARAM_DEV_VER		= 0x22,
-	DEVICE_DESC_PARAM_NUM_SEC_WPA		= 0x24,
-	DEVICE_DESC_PARAM_PSA_MAX_DATA		= 0x25,
-	DEVICE_DESC_PARAM_PSA_TMT		= 0x29,
-	DEVICE_DESC_PARAM_PRDCT_REV		= 0x2A,
-	DEVICE_DESC_PARAM_HPB_VER		= 0x40,
-	DEVICE_DESC_PARAM_HPB_CONTROL		= 0x42,
-	DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP	= 0x4F,
-	DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN	= 0x53,
-	DEVICE_DESC_PARAM_WB_TYPE		= 0x54,
-	DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS = 0x55,
-};
-
-/* Interconnect descriptor parameters offsets in bytes*/
-enum interconnect_desc_param {
-	INTERCONNECT_DESC_PARAM_LEN		= 0x0,
-	INTERCONNECT_DESC_PARAM_TYPE		= 0x1,
-	INTERCONNECT_DESC_PARAM_UNIPRO_VER	= 0x2,
-	INTERCONNECT_DESC_PARAM_MPHY_VER	= 0x4,
-};
-
-/* Geometry descriptor parameters offsets in bytes*/
-enum geometry_desc_param {
-	GEOMETRY_DESC_PARAM_LEN			= 0x0,
-	GEOMETRY_DESC_PARAM_TYPE		= 0x1,
-	GEOMETRY_DESC_PARAM_DEV_CAP		= 0x4,
-	GEOMETRY_DESC_PARAM_MAX_NUM_LUN		= 0xC,
-	GEOMETRY_DESC_PARAM_SEG_SIZE		= 0xD,
-	GEOMETRY_DESC_PARAM_ALLOC_UNIT_SIZE	= 0x11,
-	GEOMETRY_DESC_PARAM_MIN_BLK_SIZE	= 0x12,
-	GEOMETRY_DESC_PARAM_OPT_RD_BLK_SIZE	= 0x13,
-	GEOMETRY_DESC_PARAM_OPT_WR_BLK_SIZE	= 0x14,
-	GEOMETRY_DESC_PARAM_MAX_IN_BUF_SIZE	= 0x15,
-	GEOMETRY_DESC_PARAM_MAX_OUT_BUF_SIZE	= 0x16,
-	GEOMETRY_DESC_PARAM_RPMB_RW_SIZE	= 0x17,
-	GEOMETRY_DESC_PARAM_DYN_CAP_RSRC_PLC	= 0x18,
-	GEOMETRY_DESC_PARAM_DATA_ORDER		= 0x19,
-	GEOMETRY_DESC_PARAM_MAX_NUM_CTX		= 0x1A,
-	GEOMETRY_DESC_PARAM_TAG_UNIT_SIZE	= 0x1B,
-	GEOMETRY_DESC_PARAM_TAG_RSRC_SIZE	= 0x1C,
-	GEOMETRY_DESC_PARAM_SEC_RM_TYPES	= 0x1D,
-	GEOMETRY_DESC_PARAM_MEM_TYPES		= 0x1E,
-	GEOMETRY_DESC_PARAM_SCM_MAX_NUM_UNITS	= 0x20,
-	GEOMETRY_DESC_PARAM_SCM_CAP_ADJ_FCTR	= 0x24,
-	GEOMETRY_DESC_PARAM_NPM_MAX_NUM_UNITS	= 0x26,
-	GEOMETRY_DESC_PARAM_NPM_CAP_ADJ_FCTR	= 0x2A,
-	GEOMETRY_DESC_PARAM_ENM1_MAX_NUM_UNITS	= 0x2C,
-	GEOMETRY_DESC_PARAM_ENM1_CAP_ADJ_FCTR	= 0x30,
-	GEOMETRY_DESC_PARAM_ENM2_MAX_NUM_UNITS	= 0x32,
-	GEOMETRY_DESC_PARAM_ENM2_CAP_ADJ_FCTR	= 0x36,
-	GEOMETRY_DESC_PARAM_ENM3_MAX_NUM_UNITS	= 0x38,
-	GEOMETRY_DESC_PARAM_ENM3_CAP_ADJ_FCTR	= 0x3C,
-	GEOMETRY_DESC_PARAM_ENM4_MAX_NUM_UNITS	= 0x3E,
-	GEOMETRY_DESC_PARAM_ENM4_CAP_ADJ_FCTR	= 0x42,
-	GEOMETRY_DESC_PARAM_OPT_LOG_BLK_SIZE	= 0x44,
-	GEOMETRY_DESC_PARAM_HPB_REGION_SIZE	= 0x48,
-	GEOMETRY_DESC_PARAM_HPB_NUMBER_LU	= 0x49,
-	GEOMETRY_DESC_PARAM_HPB_SUBREGION_SIZE	= 0x4A,
-	GEOMETRY_DESC_PARAM_HPB_MAX_ACTIVE_REGS	= 0x4B,
-	GEOMETRY_DESC_PARAM_WB_MAX_ALLOC_UNITS	= 0x4F,
-	GEOMETRY_DESC_PARAM_WB_MAX_WB_LUNS	= 0x53,
-	GEOMETRY_DESC_PARAM_WB_BUFF_CAP_ADJ	= 0x54,
-	GEOMETRY_DESC_PARAM_WB_SUP_RED_TYPE	= 0x55,
-	GEOMETRY_DESC_PARAM_WB_SUP_WB_TYPE	= 0x56,
-};
-
-/* Health descriptor parameters offsets in bytes*/
-enum health_desc_param {
-	HEALTH_DESC_PARAM_LEN			= 0x0,
-	HEALTH_DESC_PARAM_TYPE			= 0x1,
-	HEALTH_DESC_PARAM_EOL_INFO		= 0x2,
-	HEALTH_DESC_PARAM_LIFE_TIME_EST_A	= 0x3,
-	HEALTH_DESC_PARAM_LIFE_TIME_EST_B	= 0x4,
-};
-
-/* WriteBooster buffer mode */
-enum {
-	WB_BUF_MODE_LU_DEDICATED	= 0x0,
-	WB_BUF_MODE_SHARED		= 0x1,
-};
-
-/*
- * Logical Unit Write Protect
- * 00h: LU not write protected
- * 01h: LU write protected when fPowerOnWPEn =1
- * 02h: LU permanently write protected when fPermanentWPEn =1
- */
-enum ufs_lu_wp_type {
-	UFS_LU_NO_WP		= 0x00,
-	UFS_LU_POWER_ON_WP	= 0x01,
-	UFS_LU_PERM_WP		= 0x02,
-};
-
-/* bActiveICCLevel parameter current units */
-enum {
-	UFSHCD_NANO_AMP		= 0,
-	UFSHCD_MICRO_AMP	= 1,
-	UFSHCD_MILI_AMP		= 2,
-	UFSHCD_AMP		= 3,
-};
-
-/* Possible values for dExtendedUFSFeaturesSupport */
-enum {
-	UFS_DEV_LOW_TEMP_NOTIF		= BIT(4),
-	UFS_DEV_HIGH_TEMP_NOTIF		= BIT(5),
-	UFS_DEV_EXT_TEMP_NOTIF		= BIT(6),
-	UFS_DEV_HPB_SUPPORT		= BIT(7),
-	UFS_DEV_WRITE_BOOSTER_SUP	= BIT(8),
-};
-#define UFS_DEV_HPB_SUPPORT_VERSION		0x310
-
-#define POWER_DESC_MAX_ACTV_ICC_LVLS		16
-
-/* Attribute  bActiveICCLevel parameter bit masks definitions */
-#define ATTR_ICC_LVL_UNIT_OFFSET	14
-#define ATTR_ICC_LVL_UNIT_MASK		(0x3 << ATTR_ICC_LVL_UNIT_OFFSET)
-#define ATTR_ICC_LVL_VALUE_MASK		0x3FF
-
-/* Power descriptor parameters offsets in bytes */
-enum power_desc_param_offset {
-	PWR_DESC_LEN			= 0x0,
-	PWR_DESC_TYPE			= 0x1,
-	PWR_DESC_ACTIVE_LVLS_VCC_0	= 0x2,
-	PWR_DESC_ACTIVE_LVLS_VCCQ_0	= 0x22,
-	PWR_DESC_ACTIVE_LVLS_VCCQ2_0	= 0x42,
-};
-
-/* Exception event mask values */
-enum {
-	MASK_EE_STATUS			= 0xFFFF,
-	MASK_EE_DYNCAP_EVENT		= BIT(0),
-	MASK_EE_SYSPOOL_EVENT		= BIT(1),
-	MASK_EE_URGENT_BKOPS		= BIT(2),
-	MASK_EE_TOO_HIGH_TEMP		= BIT(3),
-	MASK_EE_TOO_LOW_TEMP		= BIT(4),
-	MASK_EE_WRITEBOOSTER_EVENT	= BIT(5),
-	MASK_EE_PERFORMANCE_THROTTLING	= BIT(6),
-};
-#define MASK_EE_URGENT_TEMP (MASK_EE_TOO_HIGH_TEMP | MASK_EE_TOO_LOW_TEMP)
-
-/* Background operation status */
-enum bkops_status {
-	BKOPS_STATUS_NO_OP               = 0x0,
-	BKOPS_STATUS_NON_CRITICAL        = 0x1,
-	BKOPS_STATUS_PERF_IMPACT         = 0x2,
-	BKOPS_STATUS_CRITICAL            = 0x3,
-	BKOPS_STATUS_MAX		 = BKOPS_STATUS_CRITICAL,
-};
-
-/* UTP QUERY Transaction Specific Fields OpCode */
-enum query_opcode {
-	UPIU_QUERY_OPCODE_NOP		= 0x0,
-	UPIU_QUERY_OPCODE_READ_DESC	= 0x1,
-	UPIU_QUERY_OPCODE_WRITE_DESC	= 0x2,
-	UPIU_QUERY_OPCODE_READ_ATTR	= 0x3,
-	UPIU_QUERY_OPCODE_WRITE_ATTR	= 0x4,
-	UPIU_QUERY_OPCODE_READ_FLAG	= 0x5,
-	UPIU_QUERY_OPCODE_SET_FLAG	= 0x6,
-	UPIU_QUERY_OPCODE_CLEAR_FLAG	= 0x7,
-	UPIU_QUERY_OPCODE_TOGGLE_FLAG	= 0x8,
-};
-
-/* bRefClkFreq attribute values */
-enum ufs_ref_clk_freq {
-	REF_CLK_FREQ_19_2_MHZ	= 0,
-	REF_CLK_FREQ_26_MHZ	= 1,
-	REF_CLK_FREQ_38_4_MHZ	= 2,
-	REF_CLK_FREQ_52_MHZ	= 3,
-	REF_CLK_FREQ_INVAL	= -1,
-};
-
-/* Query response result code */
-enum {
-	QUERY_RESULT_SUCCESS                    = 0x00,
-	QUERY_RESULT_NOT_READABLE               = 0xF6,
-	QUERY_RESULT_NOT_WRITEABLE              = 0xF7,
-	QUERY_RESULT_ALREADY_WRITTEN            = 0xF8,
-	QUERY_RESULT_INVALID_LENGTH             = 0xF9,
-	QUERY_RESULT_INVALID_VALUE              = 0xFA,
-	QUERY_RESULT_INVALID_SELECTOR           = 0xFB,
-	QUERY_RESULT_INVALID_INDEX              = 0xFC,
-	QUERY_RESULT_INVALID_IDN                = 0xFD,
-	QUERY_RESULT_INVALID_OPCODE             = 0xFE,
-	QUERY_RESULT_GENERAL_FAILURE            = 0xFF,
-};
-
-/* UTP Transfer Request Command Type (CT) */
-enum {
-	UPIU_COMMAND_SET_TYPE_SCSI	= 0x0,
-	UPIU_COMMAND_SET_TYPE_UFS	= 0x1,
-	UPIU_COMMAND_SET_TYPE_QUERY	= 0x2,
-};
-
-/* UTP Transfer Request Command Offset */
-#define UPIU_COMMAND_TYPE_OFFSET	28
-
-/* Offset of the response code in the UPIU header */
-#define UPIU_RSP_CODE_OFFSET		8
-
-enum {
-	MASK_SCSI_STATUS		= 0xFF,
-	MASK_TASK_RESPONSE              = 0xFF00,
-	MASK_RSP_UPIU_RESULT            = 0xFFFF,
-	MASK_QUERY_DATA_SEG_LEN         = 0xFFFF,
-	MASK_RSP_UPIU_DATA_SEG_LEN	= 0xFFFF,
-	MASK_RSP_EXCEPTION_EVENT        = 0x10000,
-	MASK_TM_SERVICE_RESP		= 0xFF,
-	MASK_TM_FUNC			= 0xFF,
-};
-
-/* Task management service response */
-enum {
-	UPIU_TASK_MANAGEMENT_FUNC_COMPL		= 0x00,
-	UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
-	UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED	= 0x08,
-	UPIU_TASK_MANAGEMENT_FUNC_FAILED	= 0x05,
-	UPIU_INCORRECT_LOGICAL_UNIT_NO		= 0x09,
-};
-
-/* UFS device power modes */
-enum ufs_dev_pwr_mode {
-	UFS_ACTIVE_PWR_MODE	= 1,
-	UFS_SLEEP_PWR_MODE	= 2,
-	UFS_POWERDOWN_PWR_MODE	= 3,
-	UFS_DEEPSLEEP_PWR_MODE	= 4,
-};
-
-#define UFS_WB_BUF_REMAIN_PERCENT(val) ((val) / 10)
-
-/**
- * struct utp_cmd_rsp - Response UPIU structure
- * @residual_transfer_count: Residual transfer count DW-3
- * @reserved: Reserved double words DW-4 to DW-7
- * @sense_data_len: Sense data length DW-8 U16
- * @sense_data: Sense data field DW-8 to DW-12
- */
-struct utp_cmd_rsp {
-	__be32 residual_transfer_count;
-	__be32 reserved[4];
-	__be16 sense_data_len;
-	u8 sense_data[UFS_SENSE_SIZE];
-};
-
-struct ufshpb_active_field {
-	__be16 active_rgn;
-	__be16 active_srgn;
-};
-#define HPB_ACT_FIELD_SIZE 4
-
-/**
- * struct utp_hpb_rsp - Response UPIU structure
- * @residual_transfer_count: Residual transfer count DW-3
- * @reserved1: Reserved double words DW-4 to DW-7
- * @sense_data_len: Sense data length DW-8 U16
- * @desc_type: Descriptor type of sense data
- * @additional_len: Additional length of sense data
- * @hpb_op: HPB operation type
- * @lun: LUN of response UPIU
- * @active_rgn_cnt: Active region count
- * @inactive_rgn_cnt: Inactive region count
- * @hpb_active_field: Recommended to read HPB region and subregion
- * @hpb_inactive_field: To be inactivated HPB region and subregion
- */
-struct utp_hpb_rsp {
-	__be32 residual_transfer_count;
-	__be32 reserved1[4];
-	__be16 sense_data_len;
-	u8 desc_type;
-	u8 additional_len;
-	u8 hpb_op;
-	u8 lun;
-	u8 active_rgn_cnt;
-	u8 inactive_rgn_cnt;
-	struct ufshpb_active_field hpb_active_field[2];
-	__be16 hpb_inactive_field[2];
-};
-#define UTP_HPB_RSP_SIZE 40
-
-/**
- * struct utp_upiu_rsp - general upiu response structure
- * @header: UPIU header structure DW-0 to DW-2
- * @sr: fields structure for scsi command DW-3 to DW-12
- * @qr: fields structure for query request DW-3 to DW-7
- */
-struct utp_upiu_rsp {
-	struct utp_upiu_header header;
-	union {
-		struct utp_cmd_rsp sr;
-		struct utp_hpb_rsp hr;
-		struct utp_upiu_query qr;
-	};
-};
-
-/**
- * struct ufs_query_req - parameters for building a query request
- * @query_func: UPIU header query function
- * @upiu_req: the query request data
- */
-struct ufs_query_req {
-	u8 query_func;
-	struct utp_upiu_query upiu_req;
-};
-
-/**
- * struct ufs_query_resp - UPIU QUERY
- * @response: device response code
- * @upiu_res: query response data
- */
-struct ufs_query_res {
-	u8 response;
-	struct utp_upiu_query upiu_res;
-};
-
-/*
- * VCCQ & VCCQ2 current requirement when UFS device is in sleep state
- * and link is in Hibern8 state.
- */
-#define UFS_VREG_LPM_LOAD_UA	1000 /* uA */
-
-struct ufs_vreg {
-	struct regulator *reg;
-	const char *name;
-	bool always_on;
-	bool enabled;
-	int max_uA;
-};
-
-struct ufs_vreg_info {
-	struct ufs_vreg *vcc;
-	struct ufs_vreg *vccq;
-	struct ufs_vreg *vccq2;
-	struct ufs_vreg *vdd_hba;
-};
-
-struct ufs_dev_info {
-	bool	f_power_on_wp_en;
-	/* Keeps information if any of the LU is power on write protected */
-	bool	is_lu_power_on_wp;
-	/* Maximum number of general LU supported by the UFS device */
-	u8	max_lu_supported;
-	u16	wmanufacturerid;
-	/*UFS device Product Name */
-	u8	*model;
-	u16	wspecversion;
-	u32	clk_gating_wait_us;
-
-	/* UFS HPB related flag */
-	bool	hpb_enabled;
-
-	/* UFS WB related flags */
-	bool    wb_enabled;
-	bool    wb_buf_flush_enabled;
-	u8	wb_dedicated_lu;
-	u8      wb_buffer_type;
-
-	bool	b_rpm_dev_flush_capable;
-	u8	b_presrv_uspc_en;
-};
-
-/*
- * This enum is used in string mapping in include/trace/events/ufs.h.
- */
-enum ufs_trace_str_t {
-	UFS_CMD_SEND, UFS_CMD_COMP, UFS_DEV_COMP,
-	UFS_QUERY_SEND, UFS_QUERY_COMP, UFS_QUERY_ERR,
-	UFS_TM_SEND, UFS_TM_COMP, UFS_TM_ERR
-};
-
-/*
- * Transaction Specific Fields (TSF) type in the UPIU package, this enum is
- * used in include/trace/events/ufs.h for UFS command trace.
- */
-enum ufs_trace_tsf_t {
-	UFS_TSF_CDB, UFS_TSF_OSF, UFS_TSF_TM_INPUT, UFS_TSF_TM_OUTPUT
-};
-
-#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
deleted file mode 100644
index bcb4f004bed5..000000000000
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _UFS_QUIRKS_H_
-#define _UFS_QUIRKS_H_
-
-/* return true if s1 is a prefix of s2 */
-#define STR_PRFX_EQUAL(s1, s2) !strncmp(s1, s2, strlen(s1))
-
-#define UFS_ANY_VENDOR 0xFFFF
-#define UFS_ANY_MODEL  "ANY_MODEL"
-
-#define UFS_VENDOR_MICRON      0x12C
-#define UFS_VENDOR_SAMSUNG     0x1CE
-#define UFS_VENDOR_SKHYNIX     0x1AD
-#define UFS_VENDOR_TOSHIBA     0x198
-#define UFS_VENDOR_WDC         0x145
-
-/**
- * ufs_dev_quirk - ufs device quirk info
- * @card: ufs card details
- * @quirk: device quirk
- */
-struct ufs_dev_quirk {
-	u16 wmanufacturerid;
-	const u8 *model;
-	unsigned int quirk;
-};
-
-/*
- * Some vendor's UFS device sends back to back NACs for the DL data frames
- * causing the host controller to raise the DFES error status. Sometimes
- * such UFS devices send back to back NAC without waiting for new
- * retransmitted DL frame from the host and in such cases it might be possible
- * the Host UniPro goes into bad state without raising the DFES error
- * interrupt. If this happens then all the pending commands would timeout
- * only after respective SW command (which is generally too large).
- *
- * We can workaround such device behaviour like this:
- * - As soon as SW sees the DL NAC error, it should schedule the error handler
- * - Error handler would sleep for 50ms to see if there are any fatal errors
- *   raised by UFS controller.
- *    - If there are fatal errors then SW does normal error recovery.
- *    - If there are no fatal errors then SW sends the NOP command to device
- *      to check if link is alive.
- *        - If NOP command times out, SW does normal error recovery
- *        - If NOP command succeed, skip the error handling.
- *
- * If DL NAC error is seen multiple times with some vendor's UFS devices then
- * enable this quirk to initiate quick error recovery and also silence related
- * error logs to reduce spamming of kernel logs.
- */
-#define UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS (1 << 2)
-
-/*
- * Few Toshiba UFS device models advertise RX_MIN_ACTIVATETIME_CAPABILITY as
- * 600us which may not be enough for reliable hibern8 exit hardware sequence
- * from UFS device.
- * To workaround this issue, host should set its PA_TACTIVATE time to 1ms even
- * if device advertises RX_MIN_ACTIVATETIME_CAPABILITY less than 1ms.
- */
-#define UFS_DEVICE_QUIRK_PA_TACTIVATE	(1 << 4)
-
-/*
- * It seems some UFS devices may keep drawing more than sleep current
- * (atleast for 500us) from UFS rails (especially from VCCQ rail).
- * To avoid this situation, add 2ms delay before putting these UFS
- * rails in LPM mode.
- */
-#define UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM	(1 << 6)
-
-/*
- * Some UFS devices require host PA_TACTIVATE to be lower than device
- * PA_TACTIVATE, enabling this quirk ensure this.
- */
-#define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE	(1 << 7)
-
-/*
- * The max. value PA_SaveConfigTime is 250 (10us) but this is not enough for
- * some vendors.
- * Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime.
- * Gear switch can be issued by host controller as an error recovery and any
- * software delay will not help on this case so we need to increase
- * PA_SaveConfigTime to >32us as per vendor recommendation.
- */
-#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME	(1 << 8)
-
-/*
- * Some UFS devices require VS_DebugSaveConfigTime is 0x10,
- * enabling this quirk ensure this.
- */
-#define UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME	(1 << 9)
-
-/*
- * Some pre-3.1 UFS devices can support extended features by upgrading
- * the firmware. Enable this quirk to make UFS core driver probe and enable
- * supported features on such devices.
- */
-#define UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES (1 << 10)
-
-/*
- * Some UFS devices require delay after VCC power rail is turned-off.
- * Enable this quirk to introduce 5ms delays after VCC power-off during
- * suspend flow.
- */
-#define UFS_DEVICE_QUIRK_DELAY_AFTER_LPM        (1 << 11)
-
-/*
- * Some UFS devices require L2P entry should be swapped before being sent to the
- * UFS device for HPB READ command.
- */
-#define UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ (1 << 12)
-
-#endif /* UFS_QUIRKS_H_ */
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
deleted file mode 100644
index 2b0f3441b813..000000000000
--- a/drivers/scsi/ufs/ufshcd.h
+++ /dev/null
@@ -1,1230 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Universal Flash Storage Host controller driver
- * Copyright (C) 2011-2013 Samsung India Software Operations
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- *
- * Authors:
- *	Santosh Yaraganavi <santosh.sy@samsung.com>
- *	Vinayak Holikatti <h.vinayak@samsung.com>
- */
-
-#ifndef _UFSHCD_H
-#define _UFSHCD_H
-
-#include <linux/bitfield.h>
-#include <linux/blk-crypto-profile.h>
-#include <linux/blk-mq.h>
-#include <linux/devfreq.h>
-#include <linux/pm_runtime.h>
-#include <scsi/scsi_device.h>
-#include "unipro.h"
-#include "ufs.h"
-#include "ufs_quirks.h"
-#include "ufshci.h"
-
-#define UFSHCD "ufshcd"
-
-struct ufs_hba;
-
-enum dev_cmd_type {
-	DEV_CMD_TYPE_NOP		= 0x0,
-	DEV_CMD_TYPE_QUERY		= 0x1,
-};
-
-enum ufs_event_type {
-	/* uic specific errors */
-	UFS_EVT_PA_ERR = 0,
-	UFS_EVT_DL_ERR,
-	UFS_EVT_NL_ERR,
-	UFS_EVT_TL_ERR,
-	UFS_EVT_DME_ERR,
-
-	/* fatal errors */
-	UFS_EVT_AUTO_HIBERN8_ERR,
-	UFS_EVT_FATAL_ERR,
-	UFS_EVT_LINK_STARTUP_FAIL,
-	UFS_EVT_RESUME_ERR,
-	UFS_EVT_SUSPEND_ERR,
-	UFS_EVT_WL_SUSP_ERR,
-	UFS_EVT_WL_RES_ERR,
-
-	/* abnormal events */
-	UFS_EVT_DEV_RESET,
-	UFS_EVT_HOST_RESET,
-	UFS_EVT_ABORT,
-
-	UFS_EVT_CNT,
-};
-
-/**
- * struct uic_command - UIC command structure
- * @command: UIC command
- * @argument1: UIC command argument 1
- * @argument2: UIC command argument 2
- * @argument3: UIC command argument 3
- * @cmd_active: Indicate if UIC command is outstanding
- * @done: UIC command completion
- */
-struct uic_command {
-	u32 command;
-	u32 argument1;
-	u32 argument2;
-	u32 argument3;
-	int cmd_active;
-	struct completion done;
-};
-
-/* Used to differentiate the power management options */
-enum ufs_pm_op {
-	UFS_RUNTIME_PM,
-	UFS_SYSTEM_PM,
-	UFS_SHUTDOWN_PM,
-};
-
-/* Host <-> Device UniPro Link state */
-enum uic_link_state {
-	UIC_LINK_OFF_STATE	= 0, /* Link powered down or disabled */
-	UIC_LINK_ACTIVE_STATE	= 1, /* Link is in Fast/Slow/Sleep state */
-	UIC_LINK_HIBERN8_STATE	= 2, /* Link is in Hibernate state */
-	UIC_LINK_BROKEN_STATE	= 3, /* Link is in broken state */
-};
-
-#define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
-#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
-				    UIC_LINK_ACTIVE_STATE)
-#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
-				    UIC_LINK_HIBERN8_STATE)
-#define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \
-				   UIC_LINK_BROKEN_STATE)
-#define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
-#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
-				    UIC_LINK_ACTIVE_STATE)
-#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
-				    UIC_LINK_HIBERN8_STATE)
-#define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \
-				    UIC_LINK_BROKEN_STATE)
-
-#define ufshcd_set_ufs_dev_active(h) \
-	((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
-#define ufshcd_set_ufs_dev_sleep(h) \
-	((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
-#define ufshcd_set_ufs_dev_poweroff(h) \
-	((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
-#define ufshcd_set_ufs_dev_deepsleep(h) \
-	((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE)
-#define ufshcd_is_ufs_dev_active(h) \
-	((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
-#define ufshcd_is_ufs_dev_sleep(h) \
-	((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
-#define ufshcd_is_ufs_dev_poweroff(h) \
-	((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
-#define ufshcd_is_ufs_dev_deepsleep(h) \
-	((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE)
-
-/*
- * UFS Power management levels.
- * Each level is in increasing order of power savings, except DeepSleep
- * which is lower than PowerDown with power on but not PowerDown with
- * power off.
- */
-enum ufs_pm_level {
-	UFS_PM_LVL_0,
-	UFS_PM_LVL_1,
-	UFS_PM_LVL_2,
-	UFS_PM_LVL_3,
-	UFS_PM_LVL_4,
-	UFS_PM_LVL_5,
-	UFS_PM_LVL_6,
-	UFS_PM_LVL_MAX
-};
-
-struct ufs_pm_lvl_states {
-	enum ufs_dev_pwr_mode dev_state;
-	enum uic_link_state link_state;
-};
-
-/**
- * struct ufshcd_lrb - local reference block
- * @utr_descriptor_ptr: UTRD address of the command
- * @ucd_req_ptr: UCD address of the command
- * @ucd_rsp_ptr: Response UPIU address for this command
- * @ucd_prdt_ptr: PRDT address of the command
- * @utrd_dma_addr: UTRD dma address for debug
- * @ucd_prdt_dma_addr: PRDT dma address for debug
- * @ucd_rsp_dma_addr: UPIU response dma address for debug
- * @ucd_req_dma_addr: UPIU request dma address for debug
- * @cmd: pointer to SCSI command
- * @scsi_status: SCSI status of the command
- * @command_type: SCSI, UFS, Query.
- * @task_tag: Task tag of the command
- * @lun: LUN of the command
- * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
- * @issue_time_stamp: time stamp for debug purposes
- * @compl_time_stamp: time stamp for statistics
- * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
- * @data_unit_num: the data unit number for the first block for inline crypto
- * @req_abort_skip: skip request abort task flag
- */
-struct ufshcd_lrb {
-	struct utp_transfer_req_desc *utr_descriptor_ptr;
-	struct utp_upiu_req *ucd_req_ptr;
-	struct utp_upiu_rsp *ucd_rsp_ptr;
-	struct ufshcd_sg_entry *ucd_prdt_ptr;
-
-	dma_addr_t utrd_dma_addr;
-	dma_addr_t ucd_req_dma_addr;
-	dma_addr_t ucd_rsp_dma_addr;
-	dma_addr_t ucd_prdt_dma_addr;
-
-	struct scsi_cmnd *cmd;
-	int scsi_status;
-
-	int command_type;
-	int task_tag;
-	u8 lun; /* UPIU LUN id field is only 8-bit wide */
-	bool intr_cmd;
-	ktime_t issue_time_stamp;
-	ktime_t compl_time_stamp;
-#ifdef CONFIG_SCSI_UFS_CRYPTO
-	int crypto_key_slot;
-	u64 data_unit_num;
-#endif
-
-	bool req_abort_skip;
-};
-
-/**
- * struct ufs_query - holds relevant data structures for query request
- * @request: request upiu and function
- * @descriptor: buffer for sending/receiving descriptor
- * @response: response upiu and response
- */
-struct ufs_query {
-	struct ufs_query_req request;
-	u8 *descriptor;
-	struct ufs_query_res response;
-};
-
-/**
- * struct ufs_dev_cmd - all assosiated fields with device management commands
- * @type: device management command type - Query, NOP OUT
- * @lock: lock to allow one command at a time
- * @complete: internal commands completion
- * @query: Device management query information
- */
-struct ufs_dev_cmd {
-	enum dev_cmd_type type;
-	struct mutex lock;
-	struct completion *complete;
-	struct ufs_query query;
-};
-
-/**
- * struct ufs_clk_info - UFS clock related info
- * @list: list headed by hba->clk_list_head
- * @clk: clock node
- * @name: clock name
- * @max_freq: maximum frequency supported by the clock
- * @min_freq: min frequency that can be used for clock scaling
- * @curr_freq: indicates the current frequency that it is set to
- * @keep_link_active: indicates that the clk should not be disabled if
- *		      link is active
- * @enabled: variable to check against multiple enable/disable
- */
-struct ufs_clk_info {
-	struct list_head list;
-	struct clk *clk;
-	const char *name;
-	u32 max_freq;
-	u32 min_freq;
-	u32 curr_freq;
-	bool keep_link_active;
-	bool enabled;
-};
-
-enum ufs_notify_change_status {
-	PRE_CHANGE,
-	POST_CHANGE,
-};
-
-struct ufs_pa_layer_attr {
-	u32 gear_rx;
-	u32 gear_tx;
-	u32 lane_rx;
-	u32 lane_tx;
-	u32 pwr_rx;
-	u32 pwr_tx;
-	u32 hs_rate;
-};
-
-struct ufs_pwr_mode_info {
-	bool is_valid;
-	struct ufs_pa_layer_attr info;
-};
-
-/**
- * struct ufs_hba_variant_ops - variant specific callbacks
- * @name: variant name
- * @init: called when the driver is initialized
- * @exit: called to cleanup everything done in init
- * @get_ufs_hci_version: called to get UFS HCI version
- * @clk_scale_notify: notifies that clks are scaled up/down
- * @setup_clocks: called before touching any of the controller registers
- * @hce_enable_notify: called before and after HCE enable bit is set to allow
- *                     variant specific Uni-Pro initialization.
- * @link_startup_notify: called before and after Link startup is carried out
- *                       to allow variant specific Uni-Pro initialization.
- * @pwr_change_notify: called before and after a power mode change
- *			is carried out to allow vendor spesific capabilities
- *			to be set.
- * @setup_xfer_req: called before any transfer request is issued
- *                  to set some things
- * @setup_task_mgmt: called before any task management request is issued
- *                  to set some things
- * @hibern8_notify: called around hibern8 enter/exit
- * @apply_dev_quirks: called to apply device specific quirks
- * @fixup_dev_quirks: called to modify device specific quirks
- * @suspend: called during host controller PM callback
- * @resume: called during host controller PM callback
- * @dbg_register_dump: used to dump controller debug information
- * @phy_initialization: used to initialize phys
- * @device_reset: called to issue a reset pulse on the UFS device
- * @config_scaling_param: called to configure clock scaling parameters
- * @program_key: program or evict an inline encryption key
- * @event_notify: called to notify important events
- */
-struct ufs_hba_variant_ops {
-	const char *name;
-	int	(*init)(struct ufs_hba *);
-	void    (*exit)(struct ufs_hba *);
-	u32	(*get_ufs_hci_version)(struct ufs_hba *);
-	int	(*clk_scale_notify)(struct ufs_hba *, bool,
-				    enum ufs_notify_change_status);
-	int	(*setup_clocks)(struct ufs_hba *, bool,
-				enum ufs_notify_change_status);
-	int	(*hce_enable_notify)(struct ufs_hba *,
-				     enum ufs_notify_change_status);
-	int	(*link_startup_notify)(struct ufs_hba *,
-				       enum ufs_notify_change_status);
-	int	(*pwr_change_notify)(struct ufs_hba *,
-					enum ufs_notify_change_status status,
-					struct ufs_pa_layer_attr *,
-					struct ufs_pa_layer_attr *);
-	void	(*setup_xfer_req)(struct ufs_hba *hba, int tag,
-				  bool is_scsi_cmd);
-	void	(*setup_task_mgmt)(struct ufs_hba *, int, u8);
-	void    (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
-					enum ufs_notify_change_status);
-	int	(*apply_dev_quirks)(struct ufs_hba *hba);
-	void	(*fixup_dev_quirks)(struct ufs_hba *hba);
-	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op,
-					enum ufs_notify_change_status);
-	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
-	void	(*dbg_register_dump)(struct ufs_hba *hba);
-	int	(*phy_initialization)(struct ufs_hba *);
-	int	(*device_reset)(struct ufs_hba *hba);
-	void	(*config_scaling_param)(struct ufs_hba *hba,
-				struct devfreq_dev_profile *profile,
-				struct devfreq_simple_ondemand_data *data);
-	int	(*program_key)(struct ufs_hba *hba,
-			       const union ufs_crypto_cfg_entry *cfg, int slot);
-	void	(*event_notify)(struct ufs_hba *hba,
-				enum ufs_event_type evt, void *data);
-};
-
-/* clock gating state  */
-enum clk_gating_state {
-	CLKS_OFF,
-	CLKS_ON,
-	REQ_CLKS_OFF,
-	REQ_CLKS_ON,
-};
-
-/**
- * struct ufs_clk_gating - UFS clock gating related info
- * @gate_work: worker to turn off clocks after some delay as specified in
- * delay_ms
- * @ungate_work: worker to turn on clocks that will be used in case of
- * interrupt context
- * @state: the current clocks state
- * @delay_ms: gating delay in ms
- * @is_suspended: clk gating is suspended when set to 1 which can be used
- * during suspend/resume
- * @delay_attr: sysfs attribute to control delay_attr
- * @enable_attr: sysfs attribute to enable/disable clock gating
- * @is_enabled: Indicates the current status of clock gating
- * @is_initialized: Indicates whether clock gating is initialized or not
- * @active_reqs: number of requests that are pending and should be waited for
- * completion before gating clocks.
- * @clk_gating_workq: workqueue for clock gating work.
- */
-struct ufs_clk_gating {
-	struct delayed_work gate_work;
-	struct work_struct ungate_work;
-	enum clk_gating_state state;
-	unsigned long delay_ms;
-	bool is_suspended;
-	struct device_attribute delay_attr;
-	struct device_attribute enable_attr;
-	bool is_enabled;
-	bool is_initialized;
-	int active_reqs;
-	struct workqueue_struct *clk_gating_workq;
-};
-
-struct ufs_saved_pwr_info {
-	struct ufs_pa_layer_attr info;
-	bool is_valid;
-};
-
-/**
- * struct ufs_clk_scaling - UFS clock scaling related data
- * @active_reqs: number of requests that are pending. If this is zero when
- * devfreq ->target() function is called then schedule "suspend_work" to
- * suspend devfreq.
- * @tot_busy_t: Total busy time in current polling window
- * @window_start_t: Start time (in jiffies) of the current polling window
- * @busy_start_t: Start time of current busy period
- * @enable_attr: sysfs attribute to enable/disable clock scaling
- * @saved_pwr_info: UFS power mode may also be changed during scaling and this
- * one keeps track of previous power mode.
- * @workq: workqueue to schedule devfreq suspend/resume work
- * @suspend_work: worker to suspend devfreq
- * @resume_work: worker to resume devfreq
- * @min_gear: lowest HS gear to scale down to
- * @is_enabled: tracks if scaling is currently enabled or not, controlled by
- *		clkscale_enable sysfs node
- * @is_allowed: tracks if scaling is currently allowed or not, used to block
- *		clock scaling which is not invoked from devfreq governor
- * @is_initialized: Indicates whether clock scaling is initialized or not
- * @is_busy_started: tracks if busy period has started or not
- * @is_suspended: tracks if devfreq is suspended or not
- */
-struct ufs_clk_scaling {
-	int active_reqs;
-	unsigned long tot_busy_t;
-	ktime_t window_start_t;
-	ktime_t busy_start_t;
-	struct device_attribute enable_attr;
-	struct ufs_saved_pwr_info saved_pwr_info;
-	struct workqueue_struct *workq;
-	struct work_struct suspend_work;
-	struct work_struct resume_work;
-	u32 min_gear;
-	bool is_enabled;
-	bool is_allowed;
-	bool is_initialized;
-	bool is_busy_started;
-	bool is_suspended;
-};
-
-#define UFS_EVENT_HIST_LENGTH 8
-/**
- * struct ufs_event_hist - keeps history of errors
- * @pos: index to indicate cyclic buffer position
- * @val: cyclic buffer for registers value
- * @tstamp: cyclic buffer for time stamp
- * @cnt: error counter
- */
-struct ufs_event_hist {
-	int pos;
-	u32 val[UFS_EVENT_HIST_LENGTH];
-	ktime_t tstamp[UFS_EVENT_HIST_LENGTH];
-	unsigned long long cnt;
-};
-
-/**
- * struct ufs_stats - keeps usage/err statistics
- * @last_intr_status: record the last interrupt status.
- * @last_intr_ts: record the last interrupt timestamp.
- * @hibern8_exit_cnt: Counter to keep track of number of exits,
- *		reset this after link-startup.
- * @last_hibern8_exit_tstamp: Set time after the hibern8 exit.
- *		Clear after the first successful command completion.
- * @event: array with event history.
- */
-struct ufs_stats {
-	u32 last_intr_status;
-	ktime_t last_intr_ts;
-
-	u32 hibern8_exit_cnt;
-	ktime_t last_hibern8_exit_tstamp;
-	struct ufs_event_hist event[UFS_EVT_CNT];
-};
-
-/**
- * enum ufshcd_state - UFS host controller state
- * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command
- *	processing.
- * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process
- *	SCSI commands.
- * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled.
- *	SCSI commands may be submitted to the controller.
- * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail
- *	newly submitted SCSI commands with error code DID_BAD_TARGET.
- * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery
- *	failed. Fail all SCSI commands with error code DID_ERROR.
- */
-enum ufshcd_state {
-	UFSHCD_STATE_RESET,
-	UFSHCD_STATE_OPERATIONAL,
-	UFSHCD_STATE_EH_SCHEDULED_NON_FATAL,
-	UFSHCD_STATE_EH_SCHEDULED_FATAL,
-	UFSHCD_STATE_ERROR,
-};
-
-enum ufshcd_quirks {
-	/* Interrupt aggregation support is broken */
-	UFSHCD_QUIRK_BROKEN_INTR_AGGR			= 1 << 0,
-
-	/*
-	 * delay before each dme command is required as the unipro
-	 * layer has shown instabilities
-	 */
-	UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS		= 1 << 1,
-
-	/*
-	 * If UFS host controller is having issue in processing LCC (Line
-	 * Control Command) coming from device then enable this quirk.
-	 * When this quirk is enabled, host controller driver should disable
-	 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
-	 * attribute of device to 0).
-	 */
-	UFSHCD_QUIRK_BROKEN_LCC				= 1 << 2,
-
-	/*
-	 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
-	 * inbound Link supports unterminated line in HS mode. Setting this
-	 * attribute to 1 fixes moving to HS gear.
-	 */
-	UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP		= 1 << 3,
-
-	/*
-	 * This quirk needs to be enabled if the host controller only allows
-	 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
-	 * SLOW AUTO).
-	 */
-	UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE		= 1 << 4,
-
-	/*
-	 * This quirk needs to be enabled if the host controller doesn't
-	 * advertise the correct version in UFS_VER register. If this quirk
-	 * is enabled, standard UFS host driver will call the vendor specific
-	 * ops (get_ufs_hci_version) to get the correct version.
-	 */
-	UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		= 1 << 5,
-
-	/*
-	 * Clear handling for transfer/task request list is just opposite.
-	 */
-	UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR		= 1 << 6,
-
-	/*
-	 * This quirk needs to be enabled if host controller doesn't allow
-	 * that the interrupt aggregation timer and counter are reset by s/w.
-	 */
-	UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR		= 1 << 7,
-
-	/*
-	 * This quirks needs to be enabled if host controller cannot be
-	 * enabled via HCE register.
-	 */
-	UFSHCI_QUIRK_BROKEN_HCE				= 1 << 8,
-
-	/*
-	 * This quirk needs to be enabled if the host controller regards
-	 * resolution of the values of PRDTO and PRDTL in UTRD as byte.
-	 */
-	UFSHCD_QUIRK_PRDT_BYTE_GRAN			= 1 << 9,
-
-	/*
-	 * This quirk needs to be enabled if the host controller reports
-	 * OCS FATAL ERROR with device error through sense data
-	 */
-	UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR		= 1 << 10,
-
-	/*
-	 * This quirk needs to be enabled if the host controller has
-	 * auto-hibernate capability but it doesn't work.
-	 */
-	UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8		= 1 << 11,
-
-	/*
-	 * This quirk needs to disable manual flush for write booster
-	 */
-	UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL		= 1 << 12,
-
-	/*
-	 * This quirk needs to disable unipro timeout values
-	 * before power mode change
-	 */
-	UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
-
-	/*
-	 * This quirk allows only sg entries aligned with page size.
-	 */
-	UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE		= 1 << 14,
-
-	/*
-	 * This quirk needs to be enabled if the host controller does not
-	 * support UIC command
-	 */
-	UFSHCD_QUIRK_BROKEN_UIC_CMD			= 1 << 15,
-
-	/*
-	 * This quirk needs to be enabled if the host controller cannot
-	 * support physical host configuration.
-	 */
-	UFSHCD_QUIRK_SKIP_PH_CONFIGURATION		= 1 << 16,
-};
-
-enum ufshcd_caps {
-	/* Allow dynamic clk gating */
-	UFSHCD_CAP_CLK_GATING				= 1 << 0,
-
-	/* Allow hiberb8 with clk gating */
-	UFSHCD_CAP_HIBERN8_WITH_CLK_GATING		= 1 << 1,
-
-	/* Allow dynamic clk scaling */
-	UFSHCD_CAP_CLK_SCALING				= 1 << 2,
-
-	/* Allow auto bkops to enabled during runtime suspend */
-	UFSHCD_CAP_AUTO_BKOPS_SUSPEND			= 1 << 3,
-
-	/*
-	 * This capability allows host controller driver to use the UFS HCI's
-	 * interrupt aggregation capability.
-	 * CAUTION: Enabling this might reduce overall UFS throughput.
-	 */
-	UFSHCD_CAP_INTR_AGGR				= 1 << 4,
-
-	/*
-	 * This capability allows the device auto-bkops to be always enabled
-	 * except during suspend (both runtime and suspend).
-	 * Enabling this capability means that device will always be allowed
-	 * to do background operation when it's active but it might degrade
-	 * the performance of ongoing read/write operations.
-	 */
-	UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
-
-	/*
-	 * This capability allows host controller driver to automatically
-	 * enable runtime power management by itself instead of waiting
-	 * for userspace to control the power management.
-	 */
-	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
-
-	/*
-	 * This capability allows the host controller driver to turn-on
-	 * WriteBooster, if the underlying device supports it and is
-	 * provisioned to be used. This would increase the write performance.
-	 */
-	UFSHCD_CAP_WB_EN				= 1 << 7,
-
-	/*
-	 * This capability allows the host controller driver to use the
-	 * inline crypto engine, if it is present
-	 */
-	UFSHCD_CAP_CRYPTO				= 1 << 8,
-
-	/*
-	 * This capability allows the controller regulators to be put into
-	 * lpm mode aggressively during clock gating.
-	 * This would increase power savings.
-	 */
-	UFSHCD_CAP_AGGR_POWER_COLLAPSE			= 1 << 9,
-
-	/*
-	 * This capability allows the host controller driver to use DeepSleep,
-	 * if it is supported by the UFS device. The host controller driver must
-	 * support device hardware reset via the hba->device_reset() callback,
-	 * in order to exit DeepSleep state.
-	 */
-	UFSHCD_CAP_DEEPSLEEP				= 1 << 10,
-
-	/*
-	 * This capability allows the host controller driver to use temperature
-	 * notification if it is supported by the UFS device.
-	 */
-	UFSHCD_CAP_TEMP_NOTIF				= 1 << 11,
-};
-
-struct ufs_hba_variant_params {
-	struct devfreq_dev_profile devfreq_profile;
-	struct devfreq_simple_ondemand_data ondemand_data;
-	u16 hba_enable_delay_us;
-	u32 wb_flush_threshold;
-};
-
-#ifdef CONFIG_SCSI_UFS_HPB
-/**
- * struct ufshpb_dev_info - UFSHPB device related info
- * @num_lu: the number of user logical unit to check whether all lu finished
- *          initialization
- * @rgn_size: device reported HPB region size
- * @srgn_size: device reported HPB sub-region size
- * @slave_conf_cnt: counter to check all lu finished initialization
- * @hpb_disabled: flag to check if HPB is disabled
- * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value
- * @is_legacy: flag to check HPB 1.0
- * @control_mode: either host or device
- */
-struct ufshpb_dev_info {
-	int num_lu;
-	int rgn_size;
-	int srgn_size;
-	atomic_t slave_conf_cnt;
-	bool hpb_disabled;
-	u8 max_hpb_single_cmd;
-	bool is_legacy;
-	u8 control_mode;
-};
-#endif
-
-struct ufs_hba_monitor {
-	unsigned long chunk_size;
-
-	unsigned long nr_sec_rw[2];
-	ktime_t total_busy[2];
-
-	unsigned long nr_req[2];
-	/* latencies*/
-	ktime_t lat_sum[2];
-	ktime_t lat_max[2];
-	ktime_t lat_min[2];
-
-	u32 nr_queued[2];
-	ktime_t busy_start_ts[2];
-
-	ktime_t enabled_ts;
-	bool enabled;
-};
-
-/**
- * struct ufs_hba - per adapter private structure
- * @mmio_base: UFSHCI base register address
- * @ucdl_base_addr: UFS Command Descriptor base address
- * @utrdl_base_addr: UTP Transfer Request Descriptor base address
- * @utmrdl_base_addr: UTP Task Management Descriptor base address
- * @ucdl_dma_addr: UFS Command Descriptor DMA address
- * @utrdl_dma_addr: UTRDL DMA address
- * @utmrdl_dma_addr: UTMRDL DMA address
- * @host: Scsi_Host instance of the driver
- * @dev: device handle
- * @ufs_device_wlun: WLUN that controls the entire UFS device.
- * @hwmon_device: device instance registered with the hwmon core.
- * @curr_dev_pwr_mode: active UFS device power mode.
- * @uic_link_state: active state of the link to the UFS device.
- * @rpm_lvl: desired UFS power management level during runtime PM.
- * @spm_lvl: desired UFS power management level during system PM.
- * @pm_op_in_progress: whether or not a PM operation is in progress.
- * @ahit: value of Auto-Hibernate Idle Timer register.
- * @lrb: local reference block
- * @outstanding_tasks: Bits representing outstanding task requests
- * @outstanding_lock: Protects @outstanding_reqs.
- * @outstanding_reqs: Bits representing outstanding transfer requests
- * @capabilities: UFS Controller Capabilities
- * @nutrs: Transfer Request Queue depth supported by controller
- * @nutmrs: Task Management Queue depth supported by controller
- * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock.
- * @ufs_version: UFS Version to which controller complies
- * @vops: pointer to variant specific operations
- * @vps: pointer to variant specific parameters
- * @priv: pointer to variant specific private data
- * @irq: Irq number of the controller
- * @is_irq_enabled: whether or not the UFS controller interrupt is enabled.
- * @dev_ref_clk_freq: reference clock frequency
- * @quirks: bitmask with information about deviations from the UFSHCI standard.
- * @dev_quirks: bitmask with information about deviations from the UFS standard.
- * @tmf_tag_set: TMF tag set.
- * @tmf_queue: Used to allocate TMF tags.
- * @tmf_rqs: array with pointers to TMF requests while these are in progress.
- * @active_uic_cmd: handle of active UIC command
- * @uic_cmd_mutex: mutex for UIC command
- * @uic_async_done: completion used during UIC processing
- * @ufshcd_state: UFSHCD state
- * @eh_flags: Error handling flags
- * @intr_mask: Interrupt Mask Bits
- * @ee_ctrl_mask: Exception event control mask
- * @ee_drv_mask: Exception event mask for driver
- * @ee_usr_mask: Exception event mask for user (set via debugfs)
- * @ee_ctrl_mutex: Used to serialize exception event information.
- * @is_powered: flag to check if HBA is powered
- * @shutting_down: flag to check if shutdown has been invoked
- * @host_sem: semaphore used to serialize concurrent contexts
- * @eh_wq: Workqueue that eh_work works on
- * @eh_work: Worker to handle UFS errors that require s/w attention
- * @eeh_work: Worker to handle exception events
- * @errors: HBA errors
- * @uic_error: UFS interconnect layer error status
- * @saved_err: sticky error mask
- * @saved_uic_err: sticky UIC error mask
- * @ufs_stats: various error counters
- * @force_reset: flag to force eh_work perform a full reset
- * @force_pmc: flag to force a power mode change
- * @silence_err_logs: flag to silence error logs
- * @dev_cmd: ufs device management command information
- * @last_dme_cmd_tstamp: time stamp of the last completed DME command
- * @nop_out_timeout: NOP OUT timeout value
- * @dev_info: information about the UFS device
- * @auto_bkops_enabled: to track whether bkops is enabled in device
- * @vreg_info: UFS device voltage regulator information
- * @clk_list_head: UFS host controller clocks list node head
- * @req_abort_count: number of times ufshcd_abort() has been called
- * @lanes_per_direction: number of lanes per data direction between the UFS
- *	controller and the UFS device.
- * @pwr_info: holds current power mode
- * @max_pwr_info: keeps the device max valid pwm
- * @clk_gating: information related to clock gating
- * @caps: bitmask with information about UFS controller capabilities
- * @devfreq: frequency scaling information owned by the devfreq core
- * @clk_scaling: frequency scaling information owned by the UFS driver
- * @is_sys_suspended: whether or not the entire system has been suspended
- * @urgent_bkops_lvl: keeps track of urgent bkops level for device
- * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for
- *  device is known or not.
- * @clk_scaling_lock: used to serialize device commands and clock scaling
- * @desc_size: descriptor sizes reported by device
- * @scsi_block_reqs_cnt: reference counting for scsi block requests
- * @bsg_dev: struct device associated with the BSG queue
- * @bsg_queue: BSG queue associated with the UFS controller
- * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power
- *	management) after the UFS device has finished a WriteBooster buffer
- *	flush or auto BKOP.
- * @ufshpb_dev: information related to HPB (Host Performance Booster).
- * @monitor: statistics about UFS commands
- * @crypto_capabilities: Content of crypto capabilities register (0x100)
- * @crypto_cap_array: Array of crypto capabilities
- * @crypto_cfg_register: Start of the crypto cfg array
- * @crypto_profile: the crypto profile of this hba (if applicable)
- * @debugfs_root: UFS controller debugfs root directory
- * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay
- * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore
- *	ee_ctrl_mask
- * @luns_avail: number of regular and well known LUNs supported by the UFS
- *	device
- * @complete_put: whether or not to call ufshcd_rpm_put() from inside
- *	ufshcd_resume_complete()
- */
-struct ufs_hba {
-	void __iomem *mmio_base;
-
-	/* Virtual memory reference */
-	struct utp_transfer_cmd_desc *ucdl_base_addr;
-	struct utp_transfer_req_desc *utrdl_base_addr;
-	struct utp_task_req_desc *utmrdl_base_addr;
-
-	/* DMA memory reference */
-	dma_addr_t ucdl_dma_addr;
-	dma_addr_t utrdl_dma_addr;
-	dma_addr_t utmrdl_dma_addr;
-
-	struct Scsi_Host *host;
-	struct device *dev;
-	struct scsi_device *ufs_device_wlun;
-
-#ifdef CONFIG_SCSI_UFS_HWMON
-	struct device *hwmon_device;
-#endif
-
-	enum ufs_dev_pwr_mode curr_dev_pwr_mode;
-	enum uic_link_state uic_link_state;
-	/* Desired UFS power management level during runtime PM */
-	enum ufs_pm_level rpm_lvl;
-	/* Desired UFS power management level during system PM */
-	enum ufs_pm_level spm_lvl;
-	int pm_op_in_progress;
-
-	/* Auto-Hibernate Idle Timer register value */
-	u32 ahit;
-
-	struct ufshcd_lrb *lrb;
-
-	unsigned long outstanding_tasks;
-	spinlock_t outstanding_lock;
-	unsigned long outstanding_reqs;
-
-	u32 capabilities;
-	int nutrs;
-	int nutmrs;
-	u32 reserved_slot;
-	u32 ufs_version;
-	const struct ufs_hba_variant_ops *vops;
-	struct ufs_hba_variant_params *vps;
-	void *priv;
-	unsigned int irq;
-	bool is_irq_enabled;
-	enum ufs_ref_clk_freq dev_ref_clk_freq;
-
-	unsigned int quirks;	/* Deviations from standard UFSHCI spec. */
-
-	/* Device deviations from standard UFS device spec. */
-	unsigned int dev_quirks;
-
-	struct blk_mq_tag_set tmf_tag_set;
-	struct request_queue *tmf_queue;
-	struct request **tmf_rqs;
-
-	struct uic_command *active_uic_cmd;
-	struct mutex uic_cmd_mutex;
-	struct completion *uic_async_done;
-
-	enum ufshcd_state ufshcd_state;
-	u32 eh_flags;
-	u32 intr_mask;
-	u16 ee_ctrl_mask;
-	u16 ee_drv_mask;
-	u16 ee_usr_mask;
-	struct mutex ee_ctrl_mutex;
-	bool is_powered;
-	bool shutting_down;
-	struct semaphore host_sem;
-
-	/* Work Queues */
-	struct workqueue_struct *eh_wq;
-	struct work_struct eh_work;
-	struct work_struct eeh_work;
-
-	/* HBA Errors */
-	u32 errors;
-	u32 uic_error;
-	u32 saved_err;
-	u32 saved_uic_err;
-	struct ufs_stats ufs_stats;
-	bool force_reset;
-	bool force_pmc;
-	bool silence_err_logs;
-
-	/* Device management request data */
-	struct ufs_dev_cmd dev_cmd;
-	ktime_t last_dme_cmd_tstamp;
-	int nop_out_timeout;
-
-	/* Keeps information of the UFS device connected to this host */
-	struct ufs_dev_info dev_info;
-	bool auto_bkops_enabled;
-	struct ufs_vreg_info vreg_info;
-	struct list_head clk_list_head;
-
-	/* Number of requests aborts */
-	int req_abort_count;
-
-	/* Number of lanes available (1 or 2) for Rx/Tx */
-	u32 lanes_per_direction;
-	struct ufs_pa_layer_attr pwr_info;
-	struct ufs_pwr_mode_info max_pwr_info;
-
-	struct ufs_clk_gating clk_gating;
-	/* Control to enable/disable host capabilities */
-	u32 caps;
-
-	struct devfreq *devfreq;
-	struct ufs_clk_scaling clk_scaling;
-	bool is_sys_suspended;
-
-	enum bkops_status urgent_bkops_lvl;
-	bool is_urgent_bkops_lvl_checked;
-
-	struct rw_semaphore clk_scaling_lock;
-	unsigned char desc_size[QUERY_DESC_IDN_MAX];
-	atomic_t scsi_block_reqs_cnt;
-
-	struct device		bsg_dev;
-	struct request_queue	*bsg_queue;
-	struct delayed_work rpm_dev_flush_recheck_work;
-
-#ifdef CONFIG_SCSI_UFS_HPB
-	struct ufshpb_dev_info ufshpb_dev;
-#endif
-
-	struct ufs_hba_monitor	monitor;
-
-#ifdef CONFIG_SCSI_UFS_CRYPTO
-	union ufs_crypto_capabilities crypto_capabilities;
-	union ufs_crypto_cap_entry *crypto_cap_array;
-	u32 crypto_cfg_register;
-	struct blk_crypto_profile crypto_profile;
-#endif
-#ifdef CONFIG_DEBUG_FS
-	struct dentry *debugfs_root;
-	struct delayed_work debugfs_ee_work;
-	u32 debugfs_ee_rate_limit_ms;
-#endif
-	u32 luns_avail;
-	bool complete_put;
-};
-
-/* Returns true if clocks can be gated. Otherwise false */
-static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
-{
-	return hba->caps & UFSHCD_CAP_CLK_GATING;
-}
-static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
-{
-	return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
-}
-static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba)
-{
-	return hba->caps & UFSHCD_CAP_CLK_SCALING;
-}
-static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
-{
-	return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
-}
-static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba)
-{
-	return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND;
-}
-
-static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
-{
-	return (hba->caps & UFSHCD_CAP_INTR_AGGR) &&
-		!(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR);
-}
-
-static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba)
-{
-	return !!(ufshcd_is_link_hibern8(hba) &&
-		  (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE));
-}
-
-static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
-{
-	return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) &&
-		!(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8);
-}
-
-static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
-{
-	return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit);
-}
-
-static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
-{
-	return hba->caps & UFSHCD_CAP_WB_EN;
-}
-
-#define ufshcd_writel(hba, val, reg)	\
-	writel((val), (hba)->mmio_base + (reg))
-#define ufshcd_readl(hba, reg)	\
-	readl((hba)->mmio_base + (reg))
-
-/**
- * ufshcd_rmwl - perform read/modify/write for a controller register
- * @hba: per adapter instance
- * @mask: mask to apply on read value
- * @val: actual value to write
- * @reg: register address
- */
-static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
-{
-	u32 tmp;
-
-	tmp = ufshcd_readl(hba, reg);
-	tmp &= ~mask;
-	tmp |= (val & mask);
-	ufshcd_writel(hba, tmp, reg);
-}
-
-int ufshcd_alloc_host(struct device *, struct ufs_hba **);
-void ufshcd_dealloc_host(struct ufs_hba *);
-int ufshcd_hba_enable(struct ufs_hba *hba);
-int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int);
-int ufshcd_link_recovery(struct ufs_hba *hba);
-int ufshcd_make_hba_operational(struct ufs_hba *hba);
-void ufshcd_remove(struct ufs_hba *);
-int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
-int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
-void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
-void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk);
-void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val);
-void ufshcd_hba_stop(struct ufs_hba *hba);
-void ufshcd_schedule_eh_work(struct ufs_hba *hba);
-
-static inline void check_upiu_size(void)
-{
-	BUILD_BUG_ON(ALIGNED_UPIU_SIZE <
-		GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
-}
-
-/**
- * ufshcd_set_variant - set variant specific data to the hba
- * @hba: per adapter instance
- * @variant: pointer to variant specific data
- */
-static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
-{
-	BUG_ON(!hba);
-	hba->priv = variant;
-}
-
-/**
- * ufshcd_get_variant - get variant specific data from the hba
- * @hba: per adapter instance
- */
-static inline void *ufshcd_get_variant(struct ufs_hba *hba)
-{
-	BUG_ON(!hba);
-	return hba->priv;
-}
-
-#ifdef CONFIG_PM
-extern int ufshcd_runtime_suspend(struct device *dev);
-extern int ufshcd_runtime_resume(struct device *dev);
-#endif
-#ifdef CONFIG_PM_SLEEP
-extern int ufshcd_system_suspend(struct device *dev);
-extern int ufshcd_system_resume(struct device *dev);
-#endif
-extern int ufshcd_shutdown(struct ufs_hba *hba);
-extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
-				      int agreed_gear,
-				      int adapt_val);
-extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
-			       u8 attr_set, u32 mib_val, u8 peer);
-extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
-			       u32 *mib_val, u8 peer);
-extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
-			struct ufs_pa_layer_attr *desired_pwr_mode);
-
-/* UIC command interfaces for DME primitives */
-#define DME_LOCAL	0
-#define DME_PEER	1
-#define ATTR_SET_NOR	0	/* NORMAL */
-#define ATTR_SET_ST	1	/* STATIC */
-
-static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
-				 u32 mib_val)
-{
-	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
-				   mib_val, DME_LOCAL);
-}
-
-static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
-				    u32 mib_val)
-{
-	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
-				   mib_val, DME_LOCAL);
-}
-
-static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
-				      u32 mib_val)
-{
-	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
-				   mib_val, DME_PEER);
-}
-
-static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
-					 u32 mib_val)
-{
-	return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
-				   mib_val, DME_PEER);
-}
-
-static inline int ufshcd_dme_get(struct ufs_hba *hba,
-				 u32 attr_sel, u32 *mib_val)
-{
-	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
-}
-
-static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
-				      u32 attr_sel, u32 *mib_val)
-{
-	return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
-}
-
-static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
-{
-	return (pwr_info->pwr_rx == FAST_MODE ||
-		pwr_info->pwr_rx == FASTAUTO_MODE) &&
-		(pwr_info->pwr_tx == FAST_MODE ||
-		pwr_info->pwr_tx == FASTAUTO_MODE);
-}
-
-static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
-{
-	return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
-}
-
-/* Expose Query-Request API */
-int ufshcd_query_descriptor_retry(struct ufs_hba *hba,
-				  enum query_opcode opcode,
-				  enum desc_idn idn, u8 index,
-				  u8 selector,
-				  u8 *desc_buf, int *buf_len);
-int ufshcd_read_desc_param(struct ufs_hba *hba,
-			   enum desc_idn desc_id,
-			   int desc_index,
-			   u8 param_offset,
-			   u8 *param_read_buf,
-			   u8 param_size);
-int ufshcd_query_attr_retry(struct ufs_hba *hba, enum query_opcode opcode,
-			    enum attr_idn idn, u8 index, u8 selector,
-			    u32 *attr_val);
-int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode,
-		      enum attr_idn idn, u8 index, u8 selector, u32 *attr_val);
-int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
-	enum flag_idn idn, u8 index, bool *flag_res);
-
-void ufshcd_auto_hibern8_enable(struct ufs_hba *hba);
-void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
-void ufshcd_fixup_dev_quirks(struct ufs_hba *hba,
-			     const struct ufs_dev_quirk *fixups);
-#define SD_ASCII_STD true
-#define SD_RAW false
-int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index,
-			    u8 **buf, bool ascii);
-
-int ufshcd_hold(struct ufs_hba *hba, bool async);
-void ufshcd_release(struct ufs_hba *hba);
-
-void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value);
-
-void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
-				  int *desc_length);
-
-u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
-
-int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
-
-int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
-			     struct utp_upiu_req *req_upiu,
-			     struct utp_upiu_req *rsp_upiu,
-			     int msgcode,
-			     u8 *desc_buff, int *buff_len,
-			     enum query_opcode desc_op);
-
-int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable);
-int ufshcd_suspend_prepare(struct device *dev);
-int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm);
-void ufshcd_resume_complete(struct device *dev);
-
-/* Wrapper functions for safely calling variant operations */
-static inline int ufshcd_vops_init(struct ufs_hba *hba)
-{
-	if (hba->vops && hba->vops->init)
-		return hba->vops->init(hba);
-
-	return 0;
-}
-
-static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba)
-{
-	if (hba->vops && hba->vops->phy_initialization)
-		return hba->vops->phy_initialization(hba);
-
-	return 0;
-}
-
-extern struct ufs_pm_lvl_states ufs_pm_lvl_states[];
-
-int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
-		     const char *prefix);
-
-int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask);
-int ufshcd_write_ee_control(struct ufs_hba *hba);
-int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, u16 *other_mask,
-			     u16 set, u16 clr);
-
-#endif /* End of Header */
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
deleted file mode 100644
index f81aa95ffbc4..000000000000
--- a/drivers/scsi/ufs/ufshci.h
+++ /dev/null
@@ -1,510 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Universal Flash Storage Host controller driver
- * Copyright (C) 2011-2013 Samsung India Software Operations
- *
- * Authors:
- *	Santosh Yaraganavi <santosh.sy@samsung.com>
- *	Vinayak Holikatti <h.vinayak@samsung.com>
- */
-
-#ifndef _UFSHCI_H
-#define _UFSHCI_H
-
-#include <scsi/scsi_host.h>
-
-enum {
-	TASK_REQ_UPIU_SIZE_DWORDS	= 8,
-	TASK_RSP_UPIU_SIZE_DWORDS	= 8,
-	ALIGNED_UPIU_SIZE		= 512,
-};
-
-/* UFSHCI Registers */
-enum {
-	REG_CONTROLLER_CAPABILITIES		= 0x00,
-	REG_UFS_VERSION				= 0x08,
-	REG_CONTROLLER_DEV_ID			= 0x10,
-	REG_CONTROLLER_PROD_ID			= 0x14,
-	REG_AUTO_HIBERNATE_IDLE_TIMER		= 0x18,
-	REG_INTERRUPT_STATUS			= 0x20,
-	REG_INTERRUPT_ENABLE			= 0x24,
-	REG_CONTROLLER_STATUS			= 0x30,
-	REG_CONTROLLER_ENABLE			= 0x34,
-	REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER	= 0x38,
-	REG_UIC_ERROR_CODE_DATA_LINK_LAYER	= 0x3C,
-	REG_UIC_ERROR_CODE_NETWORK_LAYER	= 0x40,
-	REG_UIC_ERROR_CODE_TRANSPORT_LAYER	= 0x44,
-	REG_UIC_ERROR_CODE_DME			= 0x48,
-	REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL	= 0x4C,
-	REG_UTP_TRANSFER_REQ_LIST_BASE_L	= 0x50,
-	REG_UTP_TRANSFER_REQ_LIST_BASE_H	= 0x54,
-	REG_UTP_TRANSFER_REQ_DOOR_BELL		= 0x58,
-	REG_UTP_TRANSFER_REQ_LIST_CLEAR		= 0x5C,
-	REG_UTP_TRANSFER_REQ_LIST_RUN_STOP	= 0x60,
-	REG_UTP_TASK_REQ_LIST_BASE_L		= 0x70,
-	REG_UTP_TASK_REQ_LIST_BASE_H		= 0x74,
-	REG_UTP_TASK_REQ_DOOR_BELL		= 0x78,
-	REG_UTP_TASK_REQ_LIST_CLEAR		= 0x7C,
-	REG_UTP_TASK_REQ_LIST_RUN_STOP		= 0x80,
-	REG_UIC_COMMAND				= 0x90,
-	REG_UIC_COMMAND_ARG_1			= 0x94,
-	REG_UIC_COMMAND_ARG_2			= 0x98,
-	REG_UIC_COMMAND_ARG_3			= 0x9C,
-
-	UFSHCI_REG_SPACE_SIZE			= 0xA0,
-
-	REG_UFS_CCAP				= 0x100,
-	REG_UFS_CRYPTOCAP			= 0x104,
-
-	UFSHCI_CRYPTO_REG_SPACE_SIZE		= 0x400,
-};
-
-/* Controller capability masks */
-enum {
-	MASK_TRANSFER_REQUESTS_SLOTS		= 0x0000001F,
-	MASK_TASK_MANAGEMENT_REQUEST_SLOTS	= 0x00070000,
-	MASK_AUTO_HIBERN8_SUPPORT		= 0x00800000,
-	MASK_64_ADDRESSING_SUPPORT		= 0x01000000,
-	MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT	= 0x02000000,
-	MASK_UIC_DME_TEST_MODE_SUPPORT		= 0x04000000,
-	MASK_CRYPTO_SUPPORT			= 0x10000000,
-};
-
-#define UFS_MASK(mask, offset)		((mask) << (offset))
-
-/* UFS Version 08h */
-#define MINOR_VERSION_NUM_MASK		UFS_MASK(0xFFFF, 0)
-#define MAJOR_VERSION_NUM_MASK		UFS_MASK(0xFFFF, 16)
-
-/*
- * Controller UFSHCI version
- * - 2.x and newer use the following scheme:
- *   major << 8 + minor << 4
- * - 1.x has been converted to match this in
- *   ufshcd_get_ufs_version()
- */
-static inline u32 ufshci_version(u32 major, u32 minor)
-{
-	return (major << 8) + (minor << 4);
-}
-
-/*
- * HCDDID - Host Controller Identification Descriptor
- *	  - Device ID and Device Class 10h
- */
-#define DEVICE_CLASS	UFS_MASK(0xFFFF, 0)
-#define DEVICE_ID	UFS_MASK(0xFF, 24)
-
-/*
- * HCPMID - Host Controller Identification Descriptor
- *	  - Product/Manufacturer ID  14h
- */
-#define MANUFACTURE_ID_MASK	UFS_MASK(0xFFFF, 0)
-#define PRODUCT_ID_MASK		UFS_MASK(0xFFFF, 16)
-
-/* AHIT - Auto-Hibernate Idle Timer */
-#define UFSHCI_AHIBERN8_TIMER_MASK		GENMASK(9, 0)
-#define UFSHCI_AHIBERN8_SCALE_MASK		GENMASK(12, 10)
-#define UFSHCI_AHIBERN8_SCALE_FACTOR		10
-#define UFSHCI_AHIBERN8_MAX			(1023 * 100000)
-
-/*
- * IS - Interrupt Status - 20h
- */
-#define UTP_TRANSFER_REQ_COMPL			0x1
-#define UIC_DME_END_PT_RESET			0x2
-#define UIC_ERROR				0x4
-#define UIC_TEST_MODE				0x8
-#define UIC_POWER_MODE				0x10
-#define UIC_HIBERNATE_EXIT			0x20
-#define UIC_HIBERNATE_ENTER			0x40
-#define UIC_LINK_LOST				0x80
-#define UIC_LINK_STARTUP			0x100
-#define UTP_TASK_REQ_COMPL			0x200
-#define UIC_COMMAND_COMPL			0x400
-#define DEVICE_FATAL_ERROR			0x800
-#define CONTROLLER_FATAL_ERROR			0x10000
-#define SYSTEM_BUS_FATAL_ERROR			0x20000
-#define CRYPTO_ENGINE_FATAL_ERROR		0x40000
-
-#define UFSHCD_UIC_HIBERN8_MASK	(UIC_HIBERNATE_ENTER |\
-				UIC_HIBERNATE_EXIT)
-
-#define UFSHCD_UIC_PWR_MASK	(UFSHCD_UIC_HIBERN8_MASK |\
-				UIC_POWER_MODE)
-
-#define UFSHCD_UIC_MASK		(UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
-
-#define UFSHCD_ERROR_MASK	(UIC_ERROR |\
-				DEVICE_FATAL_ERROR |\
-				CONTROLLER_FATAL_ERROR |\
-				SYSTEM_BUS_FATAL_ERROR |\
-				CRYPTO_ENGINE_FATAL_ERROR)
-
-#define INT_FATAL_ERRORS	(DEVICE_FATAL_ERROR |\
-				CONTROLLER_FATAL_ERROR |\
-				SYSTEM_BUS_FATAL_ERROR |\
-				CRYPTO_ENGINE_FATAL_ERROR |\
-				UIC_LINK_LOST)
-
-/* HCS - Host Controller Status 30h */
-#define DEVICE_PRESENT				0x1
-#define UTP_TRANSFER_REQ_LIST_READY		0x2
-#define UTP_TASK_REQ_LIST_READY			0x4
-#define UIC_COMMAND_READY			0x8
-#define HOST_ERROR_INDICATOR			0x10
-#define DEVICE_ERROR_INDICATOR			0x20
-#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK	UFS_MASK(0x7, 8)
-
-#define UFSHCD_STATUS_READY	(UTP_TRANSFER_REQ_LIST_READY |\
-				UTP_TASK_REQ_LIST_READY |\
-				UIC_COMMAND_READY)
-
-enum {
-	PWR_OK		= 0x0,
-	PWR_LOCAL	= 0x01,
-	PWR_REMOTE	= 0x02,
-	PWR_BUSY	= 0x03,
-	PWR_ERROR_CAP	= 0x04,
-	PWR_FATAL_ERROR	= 0x05,
-};
-
-/* HCE - Host Controller Enable 34h */
-#define CONTROLLER_ENABLE	0x1
-#define CONTROLLER_DISABLE	0x0
-#define CRYPTO_GENERAL_ENABLE	0x2
-
-/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
-#define UIC_PHY_ADAPTER_LAYER_ERROR			0x80000000
-#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK		0x1F
-#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK		0xF
-#define UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR		0x10
-
-/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
-#define UIC_DATA_LINK_LAYER_ERROR		0x80000000
-#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK	0xFFFF
-#define UIC_DATA_LINK_LAYER_ERROR_TCX_REP_TIMER_EXP	0x2
-#define UIC_DATA_LINK_LAYER_ERROR_AFCX_REQ_TIMER_EXP	0x4
-#define UIC_DATA_LINK_LAYER_ERROR_FCX_PRO_TIMER_EXP	0x8
-#define UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OF	0x20
-#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT	0x2000
-#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED	0x0001
-#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
-
-/* UECN - Host UIC Error Code Network Layer 40h */
-#define UIC_NETWORK_LAYER_ERROR			0x80000000
-#define UIC_NETWORK_LAYER_ERROR_CODE_MASK	0x7
-#define UIC_NETWORK_UNSUPPORTED_HEADER_TYPE	0x1
-#define UIC_NETWORK_BAD_DEVICEID_ENC		0x2
-#define UIC_NETWORK_LHDR_TRAP_PACKET_DROPPING	0x4
-
-/* UECT - Host UIC Error Code Transport Layer 44h */
-#define UIC_TRANSPORT_LAYER_ERROR		0x80000000
-#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK	0x7F
-#define UIC_TRANSPORT_UNSUPPORTED_HEADER_TYPE	0x1
-#define UIC_TRANSPORT_UNKNOWN_CPORTID		0x2
-#define UIC_TRANSPORT_NO_CONNECTION_RX		0x4
-#define UIC_TRANSPORT_CONTROLLED_SEGMENT_DROPPING	0x8
-#define UIC_TRANSPORT_BAD_TC			0x10
-#define UIC_TRANSPORT_E2E_CREDIT_OVERFOW	0x20
-#define UIC_TRANSPORT_SAFETY_VALUE_DROPPING	0x40
-
-/* UECDME - Host UIC Error Code DME 48h */
-#define UIC_DME_ERROR			0x80000000
-#define UIC_DME_ERROR_CODE_MASK		0x1
-
-/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
-#define INT_AGGR_TIMEOUT_VAL_MASK		0xFF
-#define INT_AGGR_COUNTER_THRESHOLD_MASK		UFS_MASK(0x1F, 8)
-#define INT_AGGR_COUNTER_AND_TIMER_RESET	0x10000
-#define INT_AGGR_STATUS_BIT			0x100000
-#define INT_AGGR_PARAM_WRITE			0x1000000
-#define INT_AGGR_ENABLE				0x80000000
-
-/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
-#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT	0x1
-
-/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
-#define UTP_TASK_REQ_LIST_RUN_STOP_BIT		0x1
-
-/* UICCMD - UIC Command */
-#define COMMAND_OPCODE_MASK		0xFF
-#define GEN_SELECTOR_INDEX_MASK		0xFFFF
-
-#define MIB_ATTRIBUTE_MASK		UFS_MASK(0xFFFF, 16)
-#define RESET_LEVEL			0xFF
-
-#define ATTR_SET_TYPE_MASK		UFS_MASK(0xFF, 16)
-#define CONFIG_RESULT_CODE_MASK		0xFF
-#define GENERIC_ERROR_CODE_MASK		0xFF
-
-/* GenSelectorIndex calculation macros for M-PHY attributes */
-#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
-#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
-
-#define UIC_ARG_MIB_SEL(attr, sel)	((((attr) & 0xFFFF) << 16) |\
-					 ((sel) & 0xFFFF))
-#define UIC_ARG_MIB(attr)		UIC_ARG_MIB_SEL(attr, 0)
-#define UIC_ARG_ATTR_TYPE(t)		(((t) & 0xFF) << 16)
-#define UIC_GET_ATTR_ID(v)		(((v) >> 16) & 0xFFFF)
-
-/* Link Status*/
-enum link_status {
-	UFSHCD_LINK_IS_DOWN	= 1,
-	UFSHCD_LINK_IS_UP	= 2,
-};
-
-/* UIC Commands */
-enum uic_cmd_dme {
-	UIC_CMD_DME_GET			= 0x01,
-	UIC_CMD_DME_SET			= 0x02,
-	UIC_CMD_DME_PEER_GET		= 0x03,
-	UIC_CMD_DME_PEER_SET		= 0x04,
-	UIC_CMD_DME_POWERON		= 0x10,
-	UIC_CMD_DME_POWEROFF		= 0x11,
-	UIC_CMD_DME_ENABLE		= 0x12,
-	UIC_CMD_DME_RESET		= 0x14,
-	UIC_CMD_DME_END_PT_RST		= 0x15,
-	UIC_CMD_DME_LINK_STARTUP	= 0x16,
-	UIC_CMD_DME_HIBER_ENTER		= 0x17,
-	UIC_CMD_DME_HIBER_EXIT		= 0x18,
-	UIC_CMD_DME_TEST_MODE		= 0x1A,
-};
-
-/* UIC Config result code / Generic error code */
-enum {
-	UIC_CMD_RESULT_SUCCESS			= 0x00,
-	UIC_CMD_RESULT_INVALID_ATTR		= 0x01,
-	UIC_CMD_RESULT_FAILURE			= 0x01,
-	UIC_CMD_RESULT_INVALID_ATTR_VALUE	= 0x02,
-	UIC_CMD_RESULT_READ_ONLY_ATTR		= 0x03,
-	UIC_CMD_RESULT_WRITE_ONLY_ATTR		= 0x04,
-	UIC_CMD_RESULT_BAD_INDEX		= 0x05,
-	UIC_CMD_RESULT_LOCKED_ATTR		= 0x06,
-	UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX	= 0x07,
-	UIC_CMD_RESULT_PEER_COMM_FAILURE	= 0x08,
-	UIC_CMD_RESULT_BUSY			= 0x09,
-	UIC_CMD_RESULT_DME_FAILURE		= 0x0A,
-};
-
-#define MASK_UIC_COMMAND_RESULT			0xFF
-
-#define INT_AGGR_COUNTER_THLD_VAL(c)	(((c) & 0x1F) << 8)
-#define INT_AGGR_TIMEOUT_VAL(t)		(((t) & 0xFF) << 0)
-
-/* Interrupt disable masks */
-enum {
-	/* Interrupt disable mask for UFSHCI v1.0 */
-	INTERRUPT_MASK_ALL_VER_10	= 0x30FFF,
-	INTERRUPT_MASK_RW_VER_10	= 0x30000,
-
-	/* Interrupt disable mask for UFSHCI v1.1 */
-	INTERRUPT_MASK_ALL_VER_11	= 0x31FFF,
-
-	/* Interrupt disable mask for UFSHCI v2.1 */
-	INTERRUPT_MASK_ALL_VER_21	= 0x71FFF,
-};
-
-/* CCAP - Crypto Capability 100h */
-union ufs_crypto_capabilities {
-	__le32 reg_val;
-	struct {
-		u8 num_crypto_cap;
-		u8 config_count;
-		u8 reserved;
-		u8 config_array_ptr;
-	};
-};
-
-enum ufs_crypto_key_size {
-	UFS_CRYPTO_KEY_SIZE_INVALID	= 0x0,
-	UFS_CRYPTO_KEY_SIZE_128		= 0x1,
-	UFS_CRYPTO_KEY_SIZE_192		= 0x2,
-	UFS_CRYPTO_KEY_SIZE_256		= 0x3,
-	UFS_CRYPTO_KEY_SIZE_512		= 0x4,
-};
-
-enum ufs_crypto_alg {
-	UFS_CRYPTO_ALG_AES_XTS			= 0x0,
-	UFS_CRYPTO_ALG_BITLOCKER_AES_CBC	= 0x1,
-	UFS_CRYPTO_ALG_AES_ECB			= 0x2,
-	UFS_CRYPTO_ALG_ESSIV_AES_CBC		= 0x3,
-};
-
-/* x-CRYPTOCAP - Crypto Capability X */
-union ufs_crypto_cap_entry {
-	__le32 reg_val;
-	struct {
-		u8 algorithm_id;
-		u8 sdus_mask; /* Supported data unit size mask */
-		u8 key_size;
-		u8 reserved;
-	};
-};
-
-#define UFS_CRYPTO_CONFIGURATION_ENABLE (1 << 7)
-#define UFS_CRYPTO_KEY_MAX_SIZE 64
-/* x-CRYPTOCFG - Crypto Configuration X */
-union ufs_crypto_cfg_entry {
-	__le32 reg_val[32];
-	struct {
-		u8 crypto_key[UFS_CRYPTO_KEY_MAX_SIZE];
-		u8 data_unit_size;
-		u8 crypto_cap_idx;
-		u8 reserved_1;
-		u8 config_enable;
-		u8 reserved_multi_host;
-		u8 reserved_2;
-		u8 vsb[2];
-		u8 reserved_3[56];
-	};
-};
-
-/*
- * Request Descriptor Definitions
- */
-
-/* Transfer request command type */
-enum {
-	UTP_CMD_TYPE_SCSI		= 0x0,
-	UTP_CMD_TYPE_UFS		= 0x1,
-	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
-};
-
-/* To accommodate UFS2.0 required Command type */
-enum {
-	UTP_CMD_TYPE_UFS_STORAGE	= 0x1,
-};
-
-enum {
-	UTP_SCSI_COMMAND		= 0x00000000,
-	UTP_NATIVE_UFS_COMMAND		= 0x10000000,
-	UTP_DEVICE_MANAGEMENT_FUNCTION	= 0x20000000,
-	UTP_REQ_DESC_INT_CMD		= 0x01000000,
-	UTP_REQ_DESC_CRYPTO_ENABLE_CMD	= 0x00800000,
-};
-
-/* UTP Transfer Request Data Direction (DD) */
-enum {
-	UTP_NO_DATA_TRANSFER	= 0x00000000,
-	UTP_HOST_TO_DEVICE	= 0x02000000,
-	UTP_DEVICE_TO_HOST	= 0x04000000,
-};
-
-/* Overall command status values */
-enum utp_ocs {
-	OCS_SUCCESS			= 0x0,
-	OCS_INVALID_CMD_TABLE_ATTR	= 0x1,
-	OCS_INVALID_PRDT_ATTR		= 0x2,
-	OCS_MISMATCH_DATA_BUF_SIZE	= 0x3,
-	OCS_MISMATCH_RESP_UPIU_SIZE	= 0x4,
-	OCS_PEER_COMM_FAILURE		= 0x5,
-	OCS_ABORTED			= 0x6,
-	OCS_FATAL_ERROR			= 0x7,
-	OCS_DEVICE_FATAL_ERROR		= 0x8,
-	OCS_INVALID_CRYPTO_CONFIG	= 0x9,
-	OCS_GENERAL_CRYPTO_ERROR	= 0xA,
-	OCS_INVALID_COMMAND_STATUS	= 0x0F,
-};
-
-enum {
-	MASK_OCS			= 0x0F,
-};
-
-/* The maximum length of the data byte count field in the PRDT is 256KB */
-#define PRDT_DATA_BYTE_COUNT_MAX	(256 * 1024)
-/* The granularity of the data byte count field in the PRDT is 32-bit */
-#define PRDT_DATA_BYTE_COUNT_PAD	4
-
-/**
- * struct ufshcd_sg_entry - UFSHCI PRD Entry
- * @addr: Physical address; DW-0 and DW-1.
- * @reserved: Reserved for future use DW-2
- * @size: size of physical segment DW-3
- */
-struct ufshcd_sg_entry {
-	__le64    addr;
-	__le32    reserved;
-	__le32    size;
-};
-
-/**
- * struct utp_transfer_cmd_desc - UTP Command Descriptor (UCD)
- * @command_upiu: Command UPIU Frame address
- * @response_upiu: Response UPIU Frame address
- * @prd_table: Physical Region Descriptor
- */
-struct utp_transfer_cmd_desc {
-	u8 command_upiu[ALIGNED_UPIU_SIZE];
-	u8 response_upiu[ALIGNED_UPIU_SIZE];
-	struct ufshcd_sg_entry    prd_table[SG_ALL];
-};
-
-/**
- * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
- * @dword0: Descriptor Header DW0
- * @dword1: Descriptor Header DW1
- * @dword2: Descriptor Header DW2
- * @dword3: Descriptor Header DW3
- */
-struct request_desc_header {
-	__le32 dword_0;
-	__le32 dword_1;
-	__le32 dword_2;
-	__le32 dword_3;
-};
-
-/**
- * struct utp_transfer_req_desc - UTP Transfer Request Descriptor (UTRD)
- * @header: UTRD header DW-0 to DW-3
- * @command_desc_base_addr_lo: UCD base address low DW-4
- * @command_desc_base_addr_hi: UCD base address high DW-5
- * @response_upiu_length: response UPIU length DW-6
- * @response_upiu_offset: response UPIU offset DW-6
- * @prd_table_length: Physical region descriptor length DW-7
- * @prd_table_offset: Physical region descriptor offset DW-7
- */
-struct utp_transfer_req_desc {
-
-	/* DW 0-3 */
-	struct request_desc_header header;
-
-	/* DW 4-5*/
-	__le32  command_desc_base_addr_lo;
-	__le32  command_desc_base_addr_hi;
-
-	/* DW 6 */
-	__le16  response_upiu_length;
-	__le16  response_upiu_offset;
-
-	/* DW 7 */
-	__le16  prd_table_length;
-	__le16  prd_table_offset;
-};
-
-/*
- * UTMRD structure.
- */
-struct utp_task_req_desc {
-	/* DW 0-3 */
-	struct request_desc_header header;
-
-	/* DW 4-11 - Task request UPIU structure */
-	struct {
-		struct utp_upiu_header	req_header;
-		__be32			input_param1;
-		__be32			input_param2;
-		__be32			input_param3;
-		__be32			__reserved1[2];
-	} upiu_req;
-
-	/* DW 12-19 - Task Management Response UPIU structure */
-	struct {
-		struct utp_upiu_header	rsp_header;
-		__be32			output_param1;
-		__be32			output_param2;
-		__be32			__reserved2[3];
-	} upiu_rsp;
-};
-
-#endif /* End of Header */
diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h
deleted file mode 100644
index 0521f887e3ac..000000000000
--- a/drivers/scsi/ufs/unipro.h
+++ /dev/null
@@ -1,316 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
- */
-
-#ifndef _UNIPRO_H_
-#define _UNIPRO_H_
-
-/*
- * M-TX Configuration Attributes
- */
-#define TX_HIBERN8TIME_CAPABILITY		0x000F
-#define TX_MODE					0x0021
-#define TX_HSRATE_SERIES			0x0022
-#define TX_HSGEAR				0x0023
-#define TX_PWMGEAR				0x0024
-#define TX_AMPLITUDE				0x0025
-#define TX_HS_SLEWRATE				0x0026
-#define TX_SYNC_SOURCE				0x0027
-#define TX_HS_SYNC_LENGTH			0x0028
-#define TX_HS_PREPARE_LENGTH			0x0029
-#define TX_LS_PREPARE_LENGTH			0x002A
-#define TX_HIBERN8_CONTROL			0x002B
-#define TX_LCC_ENABLE				0x002C
-#define TX_PWM_BURST_CLOSURE_EXTENSION		0x002D
-#define TX_BYPASS_8B10B_ENABLE			0x002E
-#define TX_DRIVER_POLARITY			0x002F
-#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE	0x0030
-#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE	0x0031
-#define TX_LCC_SEQUENCER			0x0032
-#define TX_MIN_ACTIVATETIME			0x0033
-#define TX_PWM_G6_G7_SYNC_LENGTH		0x0034
-#define TX_REFCLKFREQ				0x00EB
-#define TX_CFGCLKFREQVAL			0x00EC
-#define	CFGEXTRATTR				0x00F0
-#define DITHERCTRL2				0x00F1
-
-/*
- * M-RX Configuration Attributes
- */
-#define RX_MODE					0x00A1
-#define RX_HSRATE_SERIES			0x00A2
-#define RX_HSGEAR				0x00A3
-#define RX_PWMGEAR				0x00A4
-#define RX_LS_TERMINATED_ENABLE			0x00A5
-#define RX_HS_UNTERMINATED_ENABLE		0x00A6
-#define RX_ENTER_HIBERN8			0x00A7
-#define RX_BYPASS_8B10B_ENABLE			0x00A8
-#define RX_TERMINATION_FORCE_ENABLE		0x00A9
-#define RX_MIN_ACTIVATETIME_CAPABILITY		0x008F
-#define RX_HIBERN8TIME_CAPABILITY		0x0092
-#define RX_REFCLKFREQ				0x00EB
-#define	RX_CFGCLKFREQVAL			0x00EC
-#define CFGWIDEINLN				0x00F0
-#define CFGRXCDR8				0x00BA
-#define ENARXDIRECTCFG4				0x00F2
-#define CFGRXOVR8				0x00BD
-#define RXDIRECTCTRL2				0x00C7
-#define ENARXDIRECTCFG3				0x00F3
-#define RXCALCTRL				0x00B4
-#define ENARXDIRECTCFG2				0x00F4
-#define CFGRXOVR4				0x00E9
-#define RXSQCTRL				0x00B5
-#define CFGRXOVR6				0x00BF
-#define RX_HS_G1_SYNC_LENGTH_CAP		0x008B
-#define RX_HS_G1_PREP_LENGTH_CAP		0x008C
-#define RX_HS_G2_SYNC_LENGTH_CAP		0x0094
-#define RX_HS_G3_SYNC_LENGTH_CAP		0x0095
-#define RX_HS_G2_PREP_LENGTH_CAP		0x0096
-#define RX_HS_G3_PREP_LENGTH_CAP		0x0097
-#define RX_ADV_GRANULARITY_CAP			0x0098
-#define RX_MIN_ACTIVATETIME_CAP			0x008F
-#define RX_HIBERN8TIME_CAP			0x0092
-#define RX_ADV_HIBERN8TIME_CAP			0x0099
-#define RX_ADV_MIN_ACTIVATETIME_CAP		0x009A
-
-
-#define is_mphy_tx_attr(attr)			(attr < RX_MODE)
-#define RX_ADV_FINE_GRAN_STEP(x)		((((x) & 0x3) << 1) | 0x1)
-#define SYNC_LEN_FINE(x)			((x) & 0x3F)
-#define SYNC_LEN_COARSE(x)			((1 << 6) | ((x) & 0x3F))
-#define PREP_LEN(x)				((x) & 0xF)
-
-#define RX_MIN_ACTIVATETIME_UNIT_US		100
-#define HIBERN8TIME_UNIT_US			100
-
-/*
- * Common Block Attributes
- */
-#define TX_GLOBALHIBERNATE			UNIPRO_CB_OFFSET(0x002B)
-#define REFCLKMODE				UNIPRO_CB_OFFSET(0x00BF)
-#define DIRECTCTRL19				UNIPRO_CB_OFFSET(0x00CD)
-#define DIRECTCTRL10				UNIPRO_CB_OFFSET(0x00E6)
-#define CDIRECTCTRL6				UNIPRO_CB_OFFSET(0x00EA)
-#define RTOBSERVESELECT				UNIPRO_CB_OFFSET(0x00F0)
-#define CBDIVFACTOR				UNIPRO_CB_OFFSET(0x00F1)
-#define CBDCOCTRL5				UNIPRO_CB_OFFSET(0x00F3)
-#define CBPRGPLL2				UNIPRO_CB_OFFSET(0x00F8)
-#define CBPRGTUNING				UNIPRO_CB_OFFSET(0x00FB)
-
-#define UNIPRO_CB_OFFSET(x)			(0x8000 | x)
-
-/*
- * PHY Adapter attributes
- */
-#define PA_ACTIVETXDATALANES	0x1560
-#define PA_ACTIVERXDATALANES	0x1580
-#define PA_TXTRAILINGCLOCKS	0x1564
-#define PA_PHY_TYPE		0x1500
-#define PA_AVAILTXDATALANES	0x1520
-#define PA_AVAILRXDATALANES	0x1540
-#define PA_MINRXTRAILINGCLOCKS	0x1543
-#define PA_TXPWRSTATUS		0x1567
-#define PA_RXPWRSTATUS		0x1582
-#define PA_TXFORCECLOCK		0x1562
-#define PA_TXPWRMODE		0x1563
-#define PA_LEGACYDPHYESCDL	0x1570
-#define PA_MAXTXSPEEDFAST	0x1521
-#define PA_MAXTXSPEEDSLOW	0x1522
-#define PA_MAXRXSPEEDFAST	0x1541
-#define PA_MAXRXSPEEDSLOW	0x1542
-#define PA_TXLINKSTARTUPHS	0x1544
-#define PA_LOCAL_TX_LCC_ENABLE	0x155E
-#define PA_TXSPEEDFAST		0x1565
-#define PA_TXSPEEDSLOW		0x1566
-#define PA_REMOTEVERINFO	0x15A0
-#define PA_TXGEAR		0x1568
-#define PA_TXTERMINATION	0x1569
-#define PA_HSSERIES		0x156A
-#define PA_PWRMODE		0x1571
-#define PA_RXGEAR		0x1583
-#define PA_RXTERMINATION	0x1584
-#define PA_MAXRXPWMGEAR		0x1586
-#define PA_MAXRXHSGEAR		0x1587
-#define PA_RXHSUNTERMCAP	0x15A5
-#define PA_RXLSTERMCAP		0x15A6
-#define PA_GRANULARITY		0x15AA
-#define PA_PACPREQTIMEOUT	0x1590
-#define PA_PACPREQEOBTIMEOUT	0x1591
-#define PA_HIBERN8TIME		0x15A7
-#define PA_LOCALVERINFO		0x15A9
-#define PA_GRANULARITY		0x15AA
-#define PA_TACTIVATE		0x15A8
-#define PA_PACPFRAMECOUNT	0x15C0
-#define PA_PACPERRORCOUNT	0x15C1
-#define PA_PHYTESTCONTROL	0x15C2
-#define PA_PWRMODEUSERDATA0	0x15B0
-#define PA_PWRMODEUSERDATA1	0x15B1
-#define PA_PWRMODEUSERDATA2	0x15B2
-#define PA_PWRMODEUSERDATA3	0x15B3
-#define PA_PWRMODEUSERDATA4	0x15B4
-#define PA_PWRMODEUSERDATA5	0x15B5
-#define PA_PWRMODEUSERDATA6	0x15B6
-#define PA_PWRMODEUSERDATA7	0x15B7
-#define PA_PWRMODEUSERDATA8	0x15B8
-#define PA_PWRMODEUSERDATA9	0x15B9
-#define PA_PWRMODEUSERDATA10	0x15BA
-#define PA_PWRMODEUSERDATA11	0x15BB
-#define PA_CONNECTEDTXDATALANES	0x1561
-#define PA_CONNECTEDRXDATALANES	0x1581
-#define PA_LOGICALLANEMAP	0x15A1
-#define PA_SLEEPNOCONFIGTIME	0x15A2
-#define PA_STALLNOCONFIGTIME	0x15A3
-#define PA_SAVECONFIGTIME	0x15A4
-#define PA_TXHSADAPTTYPE       0x15D4
-
-/* Adpat type for PA_TXHSADAPTTYPE attribute */
-#define PA_REFRESH_ADAPT       0x00
-#define PA_INITIAL_ADAPT       0x01
-#define PA_NO_ADAPT            0x03
-
-#define PA_TACTIVATE_TIME_UNIT_US	10
-#define PA_HIBERN8_TIME_UNIT_US		100
-
-/*Other attributes*/
-#define VS_MPHYCFGUPDT		0xD085
-#define VS_DEBUGOMC		0xD09E
-#define VS_POWERSTATE		0xD083
-
-#define PA_GRANULARITY_MIN_VAL	1
-#define PA_GRANULARITY_MAX_VAL	6
-
-/* PHY Adapter Protocol Constants */
-#define PA_MAXDATALANES	4
-
-#define DL_FC0ProtectionTimeOutVal_Default	8191
-#define DL_TC0ReplayTimeOutVal_Default		65535
-#define DL_AFC0ReqTimeOutVal_Default		32767
-#define DL_FC1ProtectionTimeOutVal_Default	8191
-#define DL_TC1ReplayTimeOutVal_Default		65535
-#define DL_AFC1ReqTimeOutVal_Default		32767
-
-#define DME_LocalFC0ProtectionTimeOutVal	0xD041
-#define DME_LocalTC0ReplayTimeOutVal		0xD042
-#define DME_LocalAFC0ReqTimeOutVal		0xD043
-
-/* PA power modes */
-enum {
-	FAST_MODE	= 1,
-	SLOW_MODE	= 2,
-	FASTAUTO_MODE	= 4,
-	SLOWAUTO_MODE	= 5,
-	UNCHANGED	= 7,
-};
-
-#define PWRMODE_MASK		0xF
-#define PWRMODE_RX_OFFSET	4
-
-/* PA TX/RX Frequency Series */
-enum {
-	PA_HS_MODE_A	= 1,
-	PA_HS_MODE_B	= 2,
-};
-
-enum ufs_pwm_gear_tag {
-	UFS_PWM_DONT_CHANGE,	/* Don't change Gear */
-	UFS_PWM_G1,		/* PWM Gear 1 (default for reset) */
-	UFS_PWM_G2,		/* PWM Gear 2 */
-	UFS_PWM_G3,		/* PWM Gear 3 */
-	UFS_PWM_G4,		/* PWM Gear 4 */
-	UFS_PWM_G5,		/* PWM Gear 5 */
-	UFS_PWM_G6,		/* PWM Gear 6 */
-	UFS_PWM_G7,		/* PWM Gear 7 */
-};
-
-enum ufs_hs_gear_tag {
-	UFS_HS_DONT_CHANGE,	/* Don't change Gear */
-	UFS_HS_G1,		/* HS Gear 1 (default for reset) */
-	UFS_HS_G2,		/* HS Gear 2 */
-	UFS_HS_G3,		/* HS Gear 3 */
-	UFS_HS_G4,		/* HS Gear 4 */
-};
-
-enum ufs_unipro_ver {
-	UFS_UNIPRO_VER_RESERVED = 0,
-	UFS_UNIPRO_VER_1_40 = 1, /* UniPro version 1.40 */
-	UFS_UNIPRO_VER_1_41 = 2, /* UniPro version 1.41 */
-	UFS_UNIPRO_VER_1_6  = 3, /* UniPro version 1.6 */
-	UFS_UNIPRO_VER_1_61 = 4, /* UniPro version 1.61 */
-	UFS_UNIPRO_VER_1_8  = 5, /* UniPro version 1.8 */
-	UFS_UNIPRO_VER_MAX  = 6, /* UniPro unsupported version */
-	/* UniPro version field mask in PA_LOCALVERINFO */
-	UFS_UNIPRO_VER_MASK = 0xF,
-};
-
-/*
- * Data Link Layer Attributes
- */
-#define DL_TC0TXFCTHRESHOLD	0x2040
-#define DL_FC0PROTTIMEOUTVAL	0x2041
-#define DL_TC0REPLAYTIMEOUTVAL	0x2042
-#define DL_AFC0REQTIMEOUTVAL	0x2043
-#define DL_AFC0CREDITTHRESHOLD	0x2044
-#define DL_TC0OUTACKTHRESHOLD	0x2045
-#define DL_TC1TXFCTHRESHOLD	0x2060
-#define DL_FC1PROTTIMEOUTVAL	0x2061
-#define DL_TC1REPLAYTIMEOUTVAL	0x2062
-#define DL_AFC1REQTIMEOUTVAL	0x2063
-#define DL_AFC1CREDITTHRESHOLD	0x2064
-#define DL_TC1OUTACKTHRESHOLD	0x2065
-#define DL_TXPREEMPTIONCAP	0x2000
-#define DL_TC0TXMAXSDUSIZE	0x2001
-#define DL_TC0RXINITCREDITVAL	0x2002
-#define DL_TC0TXBUFFERSIZE	0x2005
-#define DL_PEERTC0PRESENT	0x2046
-#define DL_PEERTC0RXINITCREVAL	0x2047
-#define DL_TC1TXMAXSDUSIZE	0x2003
-#define DL_TC1RXINITCREDITVAL	0x2004
-#define DL_TC1TXBUFFERSIZE	0x2006
-#define DL_PEERTC1PRESENT	0x2066
-#define DL_PEERTC1RXINITCREVAL	0x2067
-
-/*
- * Network Layer Attributes
- */
-#define N_DEVICEID		0x3000
-#define N_DEVICEID_VALID	0x3001
-#define N_TC0TXMAXSDUSIZE	0x3020
-#define N_TC1TXMAXSDUSIZE	0x3021
-
-/*
- * Transport Layer Attributes
- */
-#define T_NUMCPORTS		0x4000
-#define T_NUMTESTFEATURES	0x4001
-#define T_CONNECTIONSTATE	0x4020
-#define T_PEERDEVICEID		0x4021
-#define T_PEERCPORTID		0x4022
-#define T_TRAFFICCLASS		0x4023
-#define T_PROTOCOLID		0x4024
-#define T_CPORTFLAGS		0x4025
-#define T_TXTOKENVALUE		0x4026
-#define T_RXTOKENVALUE		0x4027
-#define T_LOCALBUFFERSPACE	0x4028
-#define T_PEERBUFFERSPACE	0x4029
-#define T_CREDITSTOSEND		0x402A
-#define T_CPORTMODE		0x402B
-#define T_TC0TXMAXSDUSIZE	0x4060
-#define T_TC1TXMAXSDUSIZE	0x4061
-
-/* CPort setting */
-#define E2EFC_ON	(1 << 0)
-#define E2EFC_OFF	(0 << 0)
-#define CSD_N_ON	(0 << 1)
-#define CSD_N_OFF	(1 << 1)
-#define CSV_N_ON	(0 << 2)
-#define CSV_N_OFF	(1 << 2)
-#define CPORT_DEF_FLAGS	(CSV_N_OFF | CSD_N_OFF | E2EFC_OFF)
-
-/* CPort connection state */
-enum {
-	CPORT_IDLE = 0,
-	CPORT_CONNECTED,
-};
-
-#endif /* _UNIPRO_H_ */
diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig
new file mode 100644
index 000000000000..90226f72c158
--- /dev/null
+++ b/drivers/ufs/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# UFS subsystem configuration
+#
+
+menuconfig SCSI_UFSHCD
+	tristate "Universal Flash Storage Controller"
+	depends on SCSI && SCSI_DMA
+	select PM_DEVFREQ
+	select DEVFREQ_GOV_SIMPLE_ONDEMAND
+	select NLS
+	help
+	  Enables support for UFS (Universal Flash Storage) host controllers.
+	  A UFS host controller is an electronic component that is able to
+	  communicate with a UFS card. UFS host controllers occur in
+	  smartphones, laptops, digital cameras and also in cars.
+	  The kernel module will be called ufshcd.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/scsi/ufs.rst>.
+	  However, do not compile this as a module if your root file system
+	  (the one containing the directory /) is located on a UFS device.
+
+if SCSI_UFSHCD
+
+source "drivers/ufs/core/Kconfig"
+
+source "drivers/ufs/host/Kconfig"
+
+endif
diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile
new file mode 100644
index 000000000000..5a199ef18d4c
--- /dev/null
+++ b/drivers/ufs/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# The link order is important here. ufshcd-core must initialize
+# before vendor drivers.
+obj-$(CONFIG_SCSI_UFSHCD)	+= core/ host/
diff --git a/drivers/ufs/core/Kconfig b/drivers/ufs/core/Kconfig
new file mode 100644
index 000000000000..e11978171403
--- /dev/null
+++ b/drivers/ufs/core/Kconfig
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Kernel configuration file for the UFS Host Controller core.
+#
+# Copyright (C) 2011-2013 Samsung India Software Operations
+#
+# Authors:
+#	Santosh Yaraganavi <santosh.sy@samsung.com>
+#	Vinayak Holikatti <h.vinayak@samsung.com>
+
+config SCSI_UFS_BSG
+	bool "Universal Flash Storage BSG device node"
+	select BLK_DEV_BSGLIB
+	help
+	  Universal Flash Storage (UFS) is SCSI transport specification for
+	  accessing flash storage on digital cameras, mobile phones and
+	  consumer electronic devices.
+	  A UFS controller communicates with a UFS device by exchanging
+	  UFS Protocol Information Units (UPIUs).
+	  UPIUs can not only be used as a transport layer for the SCSI protocol
+	  but are also used by the UFS native command set.
+	  This transport driver supports exchanging UFS protocol information units
+	  with a UFS device. See also the ufshcd driver, which is a SCSI driver
+	  that supports UFS devices.
+
+	  Select this if you need a bsg device node for your UFS controller.
+	  If unsure, say N.
+
+config SCSI_UFS_CRYPTO
+	bool "UFS Crypto Engine Support"
+	depends on BLK_INLINE_ENCRYPTION
+	help
+	  Enable Crypto Engine Support in UFS.
+	  Enabling this makes it possible for the kernel to use the crypto
+	  capabilities of the UFS device (if present) to perform crypto
+	  operations on data being transferred to/from the device.
+
+config SCSI_UFS_HPB
+	bool "Support UFS Host Performance Booster"
+	help
+	  The UFS HPB feature improves random read performance. It caches
+	  L2P (logical to physical) map of UFS to host DRAM. The driver uses HPB
+	  read command by piggybacking physical page number for bypassing FTL (flash
+	  translation layer)'s L2P address translation.
+
+config SCSI_UFS_FAULT_INJECTION
+	bool "UFS Fault Injection Support"
+	depends on FAULT_INJECTION
+	help
+	  Enable fault injection support in the UFS driver. This makes it easier
+	  to test the UFS error handler and abort handler.
+
+config SCSI_UFS_HWMON
+	bool "UFS Temperature Notification"
+	depends on SCSI_UFSHCD=HWMON || HWMON=y
+	help
+	  This provides support for UFS hardware monitoring. If enabled,
+	  a hardware monitoring device will be created for the UFS device.
+
+	  If unsure, say N.
diff --git a/drivers/ufs/core/Makefile b/drivers/ufs/core/Makefile
new file mode 100644
index 000000000000..62f38c5bf857
--- /dev/null
+++ b/drivers/ufs/core/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_SCSI_UFSHCD)		+= ufshcd-core.o
+ufshcd-core-y				+= ufshcd.o ufs-sysfs.o
+ufshcd-core-$(CONFIG_DEBUG_FS)		+= ufs-debugfs.o
+ufshcd-core-$(CONFIG_SCSI_UFS_BSG)	+= ufs_bsg.o
+ufshcd-core-$(CONFIG_SCSI_UFS_CRYPTO)	+= ufshcd-crypto.o
+ufshcd-core-$(CONFIG_SCSI_UFS_HPB)	+= ufshpb.o
+ufshcd-core-$(CONFIG_SCSI_UFS_FAULT_INJECTION) += ufs-fault-injection.o
+ufshcd-core-$(CONFIG_SCSI_UFS_HWMON)	+= ufs-hwmon.o
diff --git a/drivers/scsi/ufs/ufs-debugfs.c b/drivers/ufs/core/ufs-debugfs.c
index c10a8f09682b..e3baed6c70bd 100644
--- a/drivers/scsi/ufs/ufs-debugfs.c
+++ b/drivers/ufs/core/ufs-debugfs.c
@@ -4,7 +4,7 @@
 #include <linux/debugfs.h>
 
 #include "ufs-debugfs.h"
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-priv.h"
 
 static struct dentry *ufs_debugfs_root;
diff --git a/drivers/scsi/ufs/ufs-debugfs.h b/drivers/ufs/core/ufs-debugfs.h
index 97548a3f90eb..97548a3f90eb 100644
--- a/drivers/scsi/ufs/ufs-debugfs.h
+++ b/drivers/ufs/core/ufs-debugfs.h
diff --git a/drivers/scsi/ufs/ufs-fault-injection.c b/drivers/ufs/core/ufs-fault-injection.c
index 7ac7c4e7ff83..7ac7c4e7ff83 100644
--- a/drivers/scsi/ufs/ufs-fault-injection.c
+++ b/drivers/ufs/core/ufs-fault-injection.c
diff --git a/drivers/scsi/ufs/ufs-fault-injection.h b/drivers/ufs/core/ufs-fault-injection.h
index 6d0cd8e10c87..6d0cd8e10c87 100644
--- a/drivers/scsi/ufs/ufs-fault-injection.h
+++ b/drivers/ufs/core/ufs-fault-injection.h
diff --git a/drivers/scsi/ufs/ufs-hwmon.c b/drivers/ufs/core/ufs-hwmon.c
index c38d9d98a86d..4c6a872b7a7c 100644
--- a/drivers/scsi/ufs/ufs-hwmon.c
+++ b/drivers/ufs/core/ufs-hwmon.c
@@ -7,7 +7,7 @@
 #include <linux/hwmon.h>
 #include <linux/units.h>
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-priv.h"
 
 struct ufs_hwmon_data {
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/ufs/core/ufs-sysfs.c
index 8a3c6442f291..0a088b47d557 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/ufs/core/ufs-sysfs.c
@@ -6,7 +6,7 @@
 #include <linux/bitfield.h>
 #include <asm/unaligned.h>
 
-#include "ufs.h"
+#include <ufs/ufs.h>
 #include "ufs-sysfs.h"
 #include "ufshcd-priv.h"
 
diff --git a/drivers/scsi/ufs/ufs-sysfs.h b/drivers/ufs/core/ufs-sysfs.h
index 8d94af3b8077..8d94af3b8077 100644
--- a/drivers/scsi/ufs/ufs-sysfs.h
+++ b/drivers/ufs/core/ufs-sysfs.h
diff --git a/drivers/scsi/ufs/ufs_bsg.c b/drivers/ufs/core/ufs_bsg.c
index 9e9b93867cab..b99e3f3dc4ef 100644
--- a/drivers/scsi/ufs/ufs_bsg.c
+++ b/drivers/ufs/core/ufs_bsg.c
@@ -9,7 +9,7 @@
 #include <scsi/scsi.h>
 #include <scsi/scsi_host.h>
 #include "ufs_bsg.h"
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-priv.h"
 
 static int ufs_bsg_get_query_desc_size(struct ufs_hba *hba, int *desc_len,
diff --git a/drivers/scsi/ufs/ufs_bsg.h b/drivers/ufs/core/ufs_bsg.h
index 57712d2656d2..57712d2656d2 100644
--- a/drivers/scsi/ufs/ufs_bsg.h
+++ b/drivers/ufs/core/ufs_bsg.h
diff --git a/drivers/scsi/ufs/ufshcd-crypto.c b/drivers/ufs/core/ufshcd-crypto.c
index 67402baf6fae..198360fe5e8e 100644
--- a/drivers/scsi/ufs/ufshcd-crypto.c
+++ b/drivers/ufs/core/ufshcd-crypto.c
@@ -3,7 +3,7 @@
  * Copyright 2019 Google LLC
  */
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-crypto.h"
 
 /* Blk-crypto modes supported by UFS crypto */
diff --git a/drivers/scsi/ufs/ufshcd-crypto.h b/drivers/ufs/core/ufshcd-crypto.h
index 9f98f18f9646..504cc841540b 100644
--- a/drivers/scsi/ufs/ufshcd-crypto.h
+++ b/drivers/ufs/core/ufshcd-crypto.h
@@ -7,9 +7,9 @@
 #define _UFSHCD_CRYPTO_H
 
 #include <scsi/scsi_cmnd.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-priv.h"
-#include "ufshci.h"
+#include <ufs/ufshci.h>
 
 #ifdef CONFIG_SCSI_UFS_CRYPTO
 
diff --git a/drivers/scsi/ufs/ufshcd-priv.h b/drivers/ufs/core/ufshcd-priv.h
index 38bc77d3dbbd..ffb01fc6de75 100644
--- a/drivers/scsi/ufs/ufshcd-priv.h
+++ b/drivers/ufs/core/ufshcd-priv.h
@@ -4,7 +4,7 @@
 #define _UFSHCD_PRIV_H_
 
 #include <linux/pm_runtime.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 
 static inline bool ufshcd_is_user_access_allowed(struct ufs_hba *hba)
 {
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 1fb3a8b9b03e..efe67a381c32 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -26,8 +26,8 @@
 #include <scsi/scsi_driver.h>
 #include <scsi/scsi_eh.h>
 #include "ufshcd-priv.h"
-#include "ufs_quirks.h"
-#include "unipro.h"
+#include <ufs/ufs_quirks.h>
+#include <ufs/unipro.h>
 #include "ufs-sysfs.h"
 #include "ufs-debugfs.h"
 #include "ufs-fault-injection.h"
diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/ufs/core/ufshpb.c
index f1f65383e97d..aee0ec4cee70 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/ufs/core/ufshpb.c
@@ -17,7 +17,7 @@
 
 #include "ufshcd-priv.h"
 #include "ufshpb.h"
-#include "../sd.h"
+#include "../../scsi/sd.h"
 
 #define ACTIVATION_THRESHOLD 8 /* 8 IOs */
 #define READ_TO_MS 1000
diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/ufs/core/ufshpb.h
index 0d6e6004d783..0d6e6004d783 100644
--- a/drivers/scsi/ufs/ufshpb.h
+++ b/drivers/ufs/core/ufshpb.h
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/ufs/host/Kconfig
index 393b9a01da36..82590224da13 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/ufs/host/Kconfig
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0+
 #
-# Kernel configuration file for the UFS Host Controller
+# Kernel configuration file for the UFS host controller drivers.
 #
 # Copyright (C) 2011-2013 Samsung India Software Operations
 #
@@ -8,26 +8,6 @@
 #	Santosh Yaraganavi <santosh.sy@samsung.com>
 #	Vinayak Holikatti <h.vinayak@samsung.com>
 
-config SCSI_UFSHCD
-	tristate "Universal Flash Storage Controller Driver Core"
-	depends on SCSI && SCSI_DMA
-	select PM_DEVFREQ
-	select DEVFREQ_GOV_SIMPLE_ONDEMAND
-	select NLS
-	help
-	  This selects the support for UFS devices in Linux, say Y and make
-	  sure that you know the name of your UFS host adapter (the card
-	  inside your computer that "speaks" the UFS protocol, also
-	  called UFS Host Controller), because you will be asked for it.
-	  The module will be called ufshcd.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/scsi/ufs.rst>.
-	  However, do not compile this as a module if your root file system
-	  (the one containing the directory /) is located on a UFS device.
-
-if SCSI_UFSHCD
-
 config SCSI_UFSHCD_PCI
 	tristate "PCI bus based UFS Controller support"
 	depends on PCI
@@ -122,24 +102,6 @@ config SCSI_UFS_TI_J721E
 	  Selects this if you have TI platform with UFS controller.
 	  If unsure, say N.
 
-config SCSI_UFS_BSG
-	bool "Universal Flash Storage BSG device node"
-	select BLK_DEV_BSGLIB
-	help
-	  Universal Flash Storage (UFS) is SCSI transport specification for
-	  accessing flash storage on digital cameras, mobile phones and
-	  consumer electronic devices.
-	  A UFS controller communicates with a UFS device by exchanging
-	  UFS Protocol Information Units (UPIUs).
-	  UPIUs can not only be used as a transport layer for the SCSI protocol
-	  but are also used by the UFS native command set.
-	  This transport driver supports exchanging UFS protocol information units
-	  with a UFS device. See also the ufshcd driver, which is a SCSI driver
-	  that supports UFS devices.
-
-	  Select this if you need a bsg device node for your UFS controller.
-	  If unsure, say N.
-
 config SCSI_UFS_EXYNOS
 	tristate "Exynos specific hooks to UFS controller platform driver"
 	depends on SCSI_UFSHCD_PLATFORM && (ARCH_EXYNOS || COMPILE_TEST)
@@ -150,38 +112,3 @@ config SCSI_UFS_EXYNOS
 
 	  Select this if you have UFS host controller on Samsung Exynos SoC.
 	  If unsure, say N.
-
-config SCSI_UFS_CRYPTO
-	bool "UFS Crypto Engine Support"
-	depends on BLK_INLINE_ENCRYPTION
-	help
-	  Enable Crypto Engine Support in UFS.
-	  Enabling this makes it possible for the kernel to use the crypto
-	  capabilities of the UFS device (if present) to perform crypto
-	  operations on data being transferred to/from the device.
-
-config SCSI_UFS_HPB
-	bool "Support UFS Host Performance Booster"
-	help
-	  The UFS HPB feature improves random read performance. It caches
-	  L2P (logical to physical) map of UFS to host DRAM. The driver uses HPB
-	  read command by piggybacking physical page number for bypassing FTL (flash
-	  translation layer)'s L2P address translation.
-
-config SCSI_UFS_FAULT_INJECTION
-	bool "UFS Fault Injection Support"
-	depends on FAULT_INJECTION
-	help
-	  Enable fault injection support in the UFS driver. This makes it easier
-	  to test the UFS error handler and abort handler.
-
-config SCSI_UFS_HWMON
-	bool "UFS Temperature Notification"
-	depends on SCSI_UFSHCD=HWMON || HWMON=y
-	help
-	  This provides support for UFS hardware monitoring. If enabled,
-	  a hardware monitoring device will be created for the UFS device.
-
-	  If unsure, say N.
-
-endif
diff --git a/drivers/scsi/ufs/Makefile b/drivers/ufs/host/Makefile
index 966048875b50..e4be54273c98 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/ufs/host/Makefile
@@ -1,16 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-# UFSHCD makefile
-
-# The link order is important here. ufshcd-core must initialize
-# before vendor drivers.
-obj-$(CONFIG_SCSI_UFSHCD)		+= ufshcd-core.o
-ufshcd-core-y				+= ufshcd.o ufs-sysfs.o
-ufshcd-core-$(CONFIG_DEBUG_FS)		+= ufs-debugfs.o
-ufshcd-core-$(CONFIG_SCSI_UFS_BSG)	+= ufs_bsg.o
-ufshcd-core-$(CONFIG_SCSI_UFS_CRYPTO)	+= ufshcd-crypto.o
-ufshcd-core-$(CONFIG_SCSI_UFS_HPB)	+= ufshpb.o
-ufshcd-core-$(CONFIG_SCSI_UFS_FAULT_INJECTION) += ufs-fault-injection.o
-ufshcd-core-$(CONFIG_SCSI_UFS_HWMON) += ufs-hwmon.o
 
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
diff --git a/drivers/scsi/ufs/cdns-pltfrm.c b/drivers/ufs/host/cdns-pltfrm.c
index e05c0ae64eea..e05c0ae64eea 100644
--- a/drivers/scsi/ufs/cdns-pltfrm.c
+++ b/drivers/ufs/host/cdns-pltfrm.c
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/ufs/host/tc-dwc-g210-pci.c
index e635c211c783..92b8ad4b58fe 100644
--- a/drivers/scsi/ufs/tc-dwc-g210-pci.c
+++ b/drivers/ufs/host/tc-dwc-g210-pci.c
@@ -7,7 +7,7 @@
  * Authors: Joao Pinto <jpinto@synopsys.com>
  */
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-dwc.h"
 #include "tc-dwc-g210.h"
 
diff --git a/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c b/drivers/ufs/host/tc-dwc-g210-pltfrm.c
index f15a84d0c176..f15a84d0c176 100644
--- a/drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
+++ b/drivers/ufs/host/tc-dwc-g210-pltfrm.c
diff --git a/drivers/scsi/ufs/tc-dwc-g210.c b/drivers/ufs/host/tc-dwc-g210.c
index 7ef67c9fc5b8..deb93dbd83a4 100644
--- a/drivers/scsi/ufs/tc-dwc-g210.c
+++ b/drivers/ufs/host/tc-dwc-g210.c
@@ -9,8 +9,8 @@
 
 #include <linux/module.h>
 
-#include "ufshcd.h"
-#include "unipro.h"
+#include <ufs/ufshcd.h>
+#include <ufs/unipro.h>
 
 #include "ufshcd-dwc.h"
 #include "ufshci-dwc.h"
diff --git a/drivers/scsi/ufs/tc-dwc-g210.h b/drivers/ufs/host/tc-dwc-g210.h
index f7154012f5c7..f7154012f5c7 100644
--- a/drivers/scsi/ufs/tc-dwc-g210.h
+++ b/drivers/ufs/host/tc-dwc-g210.h
diff --git a/drivers/scsi/ufs/ti-j721e-ufs.c b/drivers/ufs/host/ti-j721e-ufs.c
index 122d650d0810..122d650d0810 100644
--- a/drivers/scsi/ufs/ti-j721e-ufs.c
+++ b/drivers/ufs/host/ti-j721e-ufs.c
diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index ddb2d42605c5..a81d8cbd542f 100644
--- a/drivers/scsi/ufs/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -18,10 +18,10 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-pltfrm.h"
-#include "ufshci.h"
-#include "unipro.h"
+#include <ufs/ufshci.h>
+#include <ufs/unipro.h>
 
 #include "ufs-exynos.h"
 
diff --git a/drivers/scsi/ufs/ufs-exynos.h b/drivers/ufs/host/ufs-exynos.h
index 0b0a3d530ca6..0b0a3d530ca6 100644
--- a/drivers/scsi/ufs/ufs-exynos.h
+++ b/drivers/ufs/host/ufs-exynos.h
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/ufs/host/ufs-hisi.c
index 7046143063ee..2eed13bc82ca 100644
--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/ufs/host/ufs-hisi.c
@@ -15,12 +15,12 @@
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-pltfrm.h"
-#include "unipro.h"
+#include <ufs/unipro.h>
 #include "ufs-hisi.h"
-#include "ufshci.h"
-#include "ufs_quirks.h"
+#include <ufs/ufshci.h>
+#include <ufs/ufs_quirks.h>
 
 static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
 {
diff --git a/drivers/scsi/ufs/ufs-hisi.h b/drivers/ufs/host/ufs-hisi.h
index 5a90c0f4e90c..5a90c0f4e90c 100644
--- a/drivers/scsi/ufs/ufs-hisi.h
+++ b/drivers/ufs/host/ufs-hisi.h
diff --git a/drivers/scsi/ufs/ufs-mediatek-trace.h b/drivers/ufs/host/ufs-mediatek-trace.h
index 895e82ea6ece..7e010848dc99 100644
--- a/drivers/scsi/ufs/ufs-mediatek-trace.h
+++ b/drivers/ufs/host/ufs-mediatek-trace.h
@@ -31,6 +31,6 @@ TRACE_EVENT(ufs_mtk_event,
 
 #undef TRACE_INCLUDE_PATH
 #undef TRACE_INCLUDE_FILE
-#define TRACE_INCLUDE_PATH ../../drivers/scsi/ufs/
+#define TRACE_INCLUDE_PATH ../../drivers/ufs/host
 #define TRACE_INCLUDE_FILE ufs-mediatek-trace
 #include <trace/define_trace.h>
diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c
index 083d6bd4d561..beabc3ccd30b 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/ufs/host/ufs-mediatek.c
@@ -21,10 +21,10 @@
 #include <linux/sched/clock.h>
 #include <linux/soc/mediatek/mtk_sip_svc.h>
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-pltfrm.h"
-#include "ufs_quirks.h"
-#include "unipro.h"
+#include <ufs/ufs_quirks.h>
+#include <ufs/unipro.h>
 #include "ufs-mediatek.h"
 
 #define CREATE_TRACE_POINTS
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/ufs/host/ufs-mediatek.h
index 414dca86c09f..414dca86c09f 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/ufs/host/ufs-mediatek.h
diff --git a/drivers/scsi/ufs/ufs-qcom-ice.c b/drivers/ufs/host/ufs-qcom-ice.c
index 745e48ec598f..745e48ec598f 100644
--- a/drivers/scsi/ufs/ufs-qcom-ice.c
+++ b/drivers/ufs/host/ufs-qcom-ice.c
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 4dcb232facaa..f10d4668814c 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -15,12 +15,12 @@
 #include <linux/reset-controller.h>
 #include <linux/devfreq.h>
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-pltfrm.h"
-#include "unipro.h"
+#include <ufs/unipro.h>
 #include "ufs-qcom.h"
-#include "ufshci.h"
-#include "ufs_quirks.h"
+#include <ufs/ufshci.h>
+#include <ufs/ufs_quirks.h>
 
 #define UFS_QCOM_DEFAULT_DBG_PRINT_EN	\
 	(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
diff --git a/drivers/scsi/ufs/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 771bc95d02c7..44466a395bb5 100644
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -7,7 +7,7 @@
 
 #include <linux/reset-controller.h>
 #include <linux/reset.h>
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 
 #define MAX_UFS_QCOM_HOSTS	1
 #define MAX_U32                 (~(u32)0)
diff --git a/drivers/scsi/ufs/ufshcd-dwc.c b/drivers/ufs/host/ufshcd-dwc.c
index a57973c8d2a1..e28a67e1e314 100644
--- a/drivers/scsi/ufs/ufshcd-dwc.c
+++ b/drivers/ufs/host/ufshcd-dwc.c
@@ -9,8 +9,8 @@
 
 #include <linux/module.h>
 
-#include "ufshcd.h"
-#include "unipro.h"
+#include <ufs/ufshcd.h>
+#include <ufs/unipro.h>
 
 #include "ufshcd-dwc.h"
 #include "ufshci-dwc.h"
diff --git a/drivers/scsi/ufs/ufshcd-dwc.h b/drivers/ufs/host/ufshcd-dwc.h
index 43b70794e24f..ad91ea56662c 100644
--- a/drivers/scsi/ufs/ufshcd-dwc.h
+++ b/drivers/ufs/host/ufshcd-dwc.h
@@ -10,7 +10,7 @@
 #ifndef _UFSHCD_DWC_H
 #define _UFSHCD_DWC_H
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 
 struct ufshcd_dme_attr_val {
 	u32 attr_sel;
diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/ufs/host/ufshcd-pci.c
index 20af2fbc3af1..04166bda41da 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/ufs/host/ufshcd-pci.c
@@ -9,7 +9,7 @@
  *	Vinayak Holikatti <h.vinayak@samsung.com>
  */
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/pci.h>
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c
index f5313f407617..e7332cc65b1f 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/ufs/host/ufshcd-pltfrm.c
@@ -13,9 +13,9 @@
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 #include "ufshcd-pltfrm.h"
-#include "unipro.h"
+#include <ufs/unipro.h>
 
 #define UFSHCD_DEFAULT_LANES_PER_DIRECTION		2
 
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h
index c33e28ac6ef6..43c2e412bd99 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.h
+++ b/drivers/ufs/host/ufshcd-pltfrm.h
@@ -5,7 +5,7 @@
 #ifndef UFSHCD_PLTFRM_H_
 #define UFSHCD_PLTFRM_H_
 
-#include "ufshcd.h"
+#include <ufs/ufshcd.h>
 
 #define UFS_PWM_MODE 1
 #define UFS_HS_MODE  2
diff --git a/drivers/scsi/ufs/ufshci-dwc.h b/drivers/ufs/host/ufshci-dwc.h
index 6c290e272106..6c290e272106 100644
--- a/drivers/scsi/ufs/ufshci-dwc.h
+++ b/drivers/ufs/host/ufshci-dwc.h