aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/iio/adc/qcom-pm8xxx-xoadc.c3
-rw-r--r--drivers/iio/adc/qcom-spmi-adc5.c2
-rw-r--r--drivers/iio/adc/qcom-spmi-vadc.c3
-rw-r--r--drivers/iio/adc/qcom-vadc-common.c3
-rw-r--r--drivers/iio/adc/qcom-vadc-common.h185
5 files changed, 4 insertions, 192 deletions
diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index 7e108da7d255..0610bf254771 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -10,6 +10,7 @@
* Author: Linus Walleij <linus.walleij@linaro.org>
*/
+#include <linux/iio/adc/qcom-vadc-common.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/module.h>
@@ -21,8 +22,6 @@
#include <linux/interrupt.h>
#include <linux/regulator/consumer.h>
-#include "qcom-vadc-common.h"
-
/*
* Definitions for the "user processor" registers lifted from the v3.4
* Qualcomm tree. Their kernel has two out-of-tree drivers for the ADC:
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index c2da8f068b87..b10a0fcf09dc 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -7,6 +7,7 @@
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/err.h>
+#include <linux/iio/adc/qcom-vadc-common.h>
#include <linux/iio/iio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -19,7 +20,6 @@
#include <linux/slab.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include "qcom-vadc-common.h"
#define ADC5_USR_REVISION1 0x0
#define ADC5_USR_STATUS1 0x8
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index b0388f8a69f4..05ff948372b3 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -7,6 +7,7 @@
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/err.h>
+#include <linux/iio/adc/qcom-vadc-common.h>
#include <linux/iio/iio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
@@ -20,8 +21,6 @@
#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include "qcom-vadc-common.h"
-
/* VADC register and bit definitions */
#define VADC_REVISION2 0x1
#define VADC_REVISION2_SUPPORTED_VADC 1
diff --git a/drivers/iio/adc/qcom-vadc-common.c b/drivers/iio/adc/qcom-vadc-common.c
index 40d77b3af1bb..ee94774b72e6 100644
--- a/drivers/iio/adc/qcom-vadc-common.c
+++ b/drivers/iio/adc/qcom-vadc-common.c
@@ -3,14 +3,13 @@
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/fixp-arith.h>
+#include <linux/iio/adc/qcom-vadc-common.h>
#include <linux/math64.h>
#include <linux/log2.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/units.h>
-#include "qcom-vadc-common.h"
-
/* Voltage to temperature */
static const struct vadc_map_pt adcmap_100k_104ef_104fb[] = {
{1758, -40},
diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
deleted file mode 100644
index 7e5f6428e311..000000000000
--- a/drivers/iio/adc/qcom-vadc-common.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Code shared between the different Qualcomm PMIC voltage ADCs
- */
-
-#ifndef QCOM_VADC_COMMON_H
-#define QCOM_VADC_COMMON_H
-
-#define VADC_CONV_TIME_MIN_US 2000
-#define VADC_CONV_TIME_MAX_US 2100
-
-/* Min ADC code represents 0V */
-#define VADC_MIN_ADC_CODE 0x6000
-/* Max ADC code represents full-scale range of 1.8V */
-#define VADC_MAX_ADC_CODE 0xa800
-
-#define VADC_ABSOLUTE_RANGE_UV 625000
-#define VADC_RATIOMETRIC_RANGE 1800
-
-#define VADC_DEF_PRESCALING 0 /* 1:1 */
-#define VADC_DEF_DECIMATION 0 /* 512 */
-#define VADC_DEF_HW_SETTLE_TIME 0 /* 0 us */
-#define VADC_DEF_AVG_SAMPLES 0 /* 1 sample */
-#define VADC_DEF_CALIB_TYPE VADC_CALIB_ABSOLUTE
-
-#define VADC_DECIMATION_MIN 512
-#define VADC_DECIMATION_MAX 4096
-#define ADC5_DEF_VBAT_PRESCALING 1 /* 1:3 */
-#define ADC5_DECIMATION_SHORT 250
-#define ADC5_DECIMATION_MEDIUM 420
-#define ADC5_DECIMATION_LONG 840
-/* Default decimation - 1024 for rev2, 840 for pmic5 */
-#define ADC5_DECIMATION_DEFAULT 2
-#define ADC5_DECIMATION_SAMPLES_MAX 3
-
-#define VADC_HW_SETTLE_DELAY_MAX 10000
-#define VADC_HW_SETTLE_SAMPLES_MAX 16
-#define VADC_AVG_SAMPLES_MAX 512
-#define ADC5_AVG_SAMPLES_MAX 16
-
-#define PMIC5_CHG_TEMP_SCALE_FACTOR 377500
-#define PMIC5_SMB_TEMP_CONSTANT 419400
-#define PMIC5_SMB_TEMP_SCALE_FACTOR 356
-
-#define PMI_CHG_SCALE_1 -138890
-#define PMI_CHG_SCALE_2 391750000000LL
-
-#define VADC5_MAX_CODE 0x7fff
-#define ADC5_FULL_SCALE_CODE 0x70e4
-#define ADC5_USR_DATA_CHECK 0x8000
-
-#define R_PU_100K 100000
-#define RATIO_MAX_ADC7 BIT(14)
-
-#define DIE_TEMP_ADC7_SCALE_1 -60000
-#define DIE_TEMP_ADC7_SCALE_2 20000
-#define DIE_TEMP_ADC7_SCALE_FACTOR 1000
-#define DIE_TEMP_ADC7_MAX 160000
-
-/**
- * struct vadc_map_pt - Map the graph representation for ADC channel
- * @x: Represent the ADC digitized code.
- * @y: Represent the physical data which can be temperature, voltage,
- * resistance.
- */
-struct vadc_map_pt {
- s32 x;
- s32 y;
-};
-
-/*
- * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
- * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
- * calibration.
- */
-enum vadc_calibration {
- VADC_CALIB_ABSOLUTE = 0,
- VADC_CALIB_RATIOMETRIC
-};
-
-/**
- * struct vadc_linear_graph - Represent ADC characteristics.
- * @dy: numerator slope to calculate the gain.
- * @dx: denominator slope to calculate the gain.
- * @gnd: A/D word of the ground reference used for the channel.
- *
- * Each ADC device has different offset and gain parameters which are
- * computed to calibrate the device.
- */
-struct vadc_linear_graph {
- s32 dy;
- s32 dx;
- s32 gnd;
-};
-
-/**
- * struct vadc_prescale_ratio - Represent scaling ratio for ADC input.
- * @num: the inverse numerator of the gain applied to the input channel.
- * @den: the inverse denominator of the gain applied to the input channel.
- */
-struct vadc_prescale_ratio {
- u32 num;
- u32 den;
-};
-
-/**
- * enum vadc_scale_fn_type - Scaling function to convert ADC code to
- * physical scaled units for the channel.
- * SCALE_DEFAULT: Default scaling to convert raw adc code to voltage (uV).
- * SCALE_THERM_100K_PULLUP: Returns temperature in millidegC.
- * Uses a mapping table with 100K pullup.
- * SCALE_PMIC_THERM: Returns result in milli degree's Centigrade.
- * SCALE_XOTHERM: Returns XO thermistor voltage in millidegC.
- * SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp
- * SCALE_HW_CALIB_DEFAULT: Default scaling to convert raw adc code to
- * voltage (uV) with hardware applied offset/slope values to adc code.
- * SCALE_HW_CALIB_THERM_100K_PULLUP: Returns temperature in millidegC using
- * lookup table. The hardware applies offset/slope to adc code.
- * SCALE_HW_CALIB_XOTHERM: Returns XO thermistor voltage in millidegC using
- * 100k pullup. The hardware applies offset/slope to adc code.
- * SCALE_HW_CALIB_THERM_100K_PU_PM7: Returns temperature in millidegC using
- * lookup table for PMIC7. The hardware applies offset/slope to adc code.
- * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade.
- * The hardware applies offset/slope to adc code.
- * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade.
- * The hardware applies offset/slope to adc code. This is for PMIC7.
- * SCALE_HW_CALIB_PM5_CHG_TEMP: Returns result in millidegrees for PMIC5
- * charger temperature.
- * SCALE_HW_CALIB_PM5_SMB_TEMP: Returns result in millidegrees for PMIC5
- * SMB1390 temperature.
- */
-enum vadc_scale_fn_type {
- SCALE_DEFAULT = 0,
- SCALE_THERM_100K_PULLUP,
- SCALE_PMIC_THERM,
- SCALE_XOTHERM,
- SCALE_PMI_CHG_TEMP,
- SCALE_HW_CALIB_DEFAULT,
- SCALE_HW_CALIB_THERM_100K_PULLUP,
- SCALE_HW_CALIB_XOTHERM,
- SCALE_HW_CALIB_THERM_100K_PU_PM7,
- SCALE_HW_CALIB_PMIC_THERM,
- SCALE_HW_CALIB_PMIC_THERM_PM7,
- SCALE_HW_CALIB_PM5_CHG_TEMP,
- SCALE_HW_CALIB_PM5_SMB_TEMP,
- SCALE_HW_CALIB_INVALID,
-};
-
-struct adc5_data {
- const u32 full_scale_code_volt;
- const u32 full_scale_code_cur;
- const struct adc5_channels *adc_chans;
- const struct iio_info *info;
- unsigned int *decimation;
- unsigned int *hw_settle_1;
- unsigned int *hw_settle_2;
-};
-
-int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
- const struct vadc_linear_graph *calib_graph,
- const struct vadc_prescale_ratio *prescale,
- bool absolute,
- u16 adc_code, int *result_mdec);
-
-struct qcom_adc5_scale_type {
- int (*scale_fn)(const struct vadc_prescale_ratio *prescale,
- const struct adc5_data *data, u16 adc_code, int *result);
-};
-
-int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype,
- unsigned int prescale_ratio,
- const struct adc5_data *data,
- u16 adc_code, int *result_mdec);
-
-int qcom_adc5_prescaling_from_dt(u32 num, u32 den);
-
-int qcom_adc5_hw_settle_time_from_dt(u32 value, const unsigned int *hw_settle);
-
-int qcom_adc5_avg_samples_from_dt(u32 value);
-
-int qcom_adc5_decimation_from_dt(u32 value, const unsigned int *decimation);
-
-int qcom_vadc_decimation_from_dt(u32 value);
-
-#endif /* QCOM_VADC_COMMON_H */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 06:16:51 +0000