diff options
Diffstat (limited to 'include/asm-arm/arch-imx')
| -rw-r--r-- | include/asm-arm/arch-imx/debug-macro.S | 34 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/dma.h | 71 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/entry-macro.S | 29 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/hardware.h | 99 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/imx-regs.h | 548 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/io.h | 28 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/irq.h | 20 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/irqs.h | 116 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/memory.h | 38 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/mx1ads.h | 36 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/param.h | 19 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/system.h | 40 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/timex.h | 27 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/uncompress.h | 78 | ||||
| -rw-r--r-- | include/asm-arm/arch-imx/vmalloc.h | 32 |
15 files changed, 1215 insertions, 0 deletions
diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S new file mode 100644 index 000000000000..83f552f7bcc1 --- /dev/null +++ b/include/asm-arm/arch-imx/debug-macro.S @@ -0,0 +1,34 @@ +/* linux/include/asm-arm/arch-imx/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x00000000 @ physical + movne \rx, #0xe0000000 @ virtual + orr \rx, \rx, #0x00200000 + orr \rx, \rx, #0x00006000 @ UART1 offset + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x40] @ TXDATA + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x98] @ SR2 + tst \rd, #1 << 3 @ TXDC + beq 1002b @ wait until transmit done + .endm diff --git a/include/asm-arm/arch-imx/dma.h b/include/asm-arm/arch-imx/dma.h new file mode 100644 index 000000000000..dbdc01780413 --- /dev/null +++ b/include/asm-arm/arch-imx/dma.h @@ -0,0 +1,71 @@ +/* + * linux/include/asm-arm/imxads/dma.h + * + * Copyright (C) 1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#define MAX_DMA_ADDRESS 0xffffffff + +#define MAX_DMA_CHANNELS 0 + +/* + * DMA registration + */ + +typedef enum { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 3, + DMA_PRIO_LOW = 6 +} imx_dma_prio; + +int imx_request_dma(char *name, imx_dma_prio prio, + void (*irq_handler) (int, void *, struct pt_regs *), + void (*err_handler) (int, void *, struct pt_regs *), + void *data); + +void imx_free_dma(int dma_ch); + + +#define DMA_REQ_UART3_T 2 +#define DMA_REQ_UART3_R 3 +#define DMA_REQ_SSI2_T 4 +#define DMA_REQ_SSI2_R 5 +#define DMA_REQ_CSI_STAT 6 +#define DMA_REQ_CSI_R 7 +#define DMA_REQ_MSHC 8 +#define DMA_REQ_DSPA_DCT_DOUT 9 +#define DMA_REQ_DSPA_DCT_DIN 10 +#define DMA_REQ_DSPA_MAC 11 +#define DMA_REQ_EXT 12 +#define DMA_REQ_SDHC 13 +#define DMA_REQ_SPI1_R 14 +#define DMA_REQ_SPI1_T 15 +#define DMA_REQ_SSI_T 16 +#define DMA_REQ_SSI_R 17 +#define DMA_REQ_ASP_DAC 18 +#define DMA_REQ_ASP_ADC 19 +#define DMA_REQ_USP_EP(x) (20+(x)) +#define DMA_REQ_SPI2_R 26 +#define DMA_REQ_SPI2_T 27 +#define DMA_REQ_UART2_T 28 +#define DMA_REQ_UART2_R 29 +#define DMA_REQ_UART1_T 30 +#define DMA_REQ_UART1_R 31 + +#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S new file mode 100644 index 000000000000..b40ea7cf88ec --- /dev/null +++ b/include/asm-arm/arch-imx/entry-macro.S @@ -0,0 +1,29 @@ +/* + * include/asm-arm/arch-imx/entry-macro.S + * + * Low-level IRQ helper macros for iMX-based platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + .macro disable_fiq + .endm +#define AITC_NIVECSR 0x40 + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqstat, =IO_ADDRESS(IMX_AITC_BASE) + @ Load offset & priority of the highest priority + @ interrupt pending. + ldr \irqnr, [\irqstat, #AITC_NIVECSR] + @ Shift off the priority leaving the offset or + @ "interrupt number" + mov \irqnr, \irqnr, lsr #16 + ldr \irqstat, =1 @ dummy compare + ldr \base, =0xFFFF // invalid interrupt + cmp \irqnr, \base + bne 1001f + ldr \irqstat, =0 +1001: + tst \irqstat, #1 @ to make the condition code = TRUE + .endm + diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h new file mode 100644 index 000000000000..adffb6acf42a --- /dev/null +++ b/include/asm-arm/arch-imx/hardware.h @@ -0,0 +1,99 @@ +/* + * linux/include/asm-arm/arch-imx/hardware.h + * + * Copyright (C) 1999 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <asm/sizes.h> +#include "imx-regs.h" + +#ifndef __ASSEMBLY__ +# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x))) + +# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) +#endif + +/* + * Memory map + */ + +#define IMX_IO_PHYS 0x00200000 +#define IMX_IO_SIZE 0x00100000 +#define IMX_IO_BASE 0xe0000000 + +#define IMX_CS0_PHYS 0x10000000 +#define IMX_CS0_SIZE 0x02000000 +#define IMX_CS0_VIRT 0xe8000000 + +#define IMX_CS1_PHYS 0x12000000 +#define IMX_CS1_SIZE 0x01000000 +#define IMX_CS1_VIRT 0xea000000 + +#define IMX_CS2_PHYS 0x13000000 +#define IMX_CS2_SIZE 0x01000000 +#define IMX_CS2_VIRT 0xeb000000 + +#define IMX_CS3_PHYS 0x14000000 +#define IMX_CS3_SIZE 0x01000000 +#define IMX_CS3_VIRT 0xec000000 + +#define IMX_CS4_PHYS 0x15000000 +#define IMX_CS4_SIZE 0x01000000 +#define IMX_CS4_VIRT 0xed000000 + +#define IMX_CS5_PHYS 0x16000000 +#define IMX_CS5_SIZE 0x01000000 +#define IMX_CS5_VIRT 0xee000000 + +#define IMX_FB_VIRT 0xF1000000 +#define IMX_FB_SIZE (256*1024) + +/* macro to get at IO space when running virtually */ +#define IO_ADDRESS(x) ((x) | IMX_IO_BASE) + +#ifndef __ASSEMBLY__ +/* + * Handy routine to set GPIO functions + */ +extern void imx_gpio_mode( int gpio_mode ); + +/* get frequencies in Hz */ +extern unsigned int imx_get_system_clk(void); +extern unsigned int imx_get_mcu_clk(void); +extern unsigned int imx_get_perclk1(void); /* UART[12], Timer[12], PWM */ +extern unsigned int imx_get_perclk2(void); /* LCD, SD, SPI[12] */ +extern unsigned int imx_get_perclk3(void); /* SSI */ +extern unsigned int imx_get_hclk(void); /* SDRAM, CSI, Memory Stick,*/ + /* I2C, DMA */ +#endif + +#define MAXIRQNUM 62 +#define MAXFIQNUM 62 +#define MAXSWINUM 62 + +/* + * Use SDRAM for memory + */ +#define MEM_SIZE 0x01000000 + +#ifdef CONFIG_ARCH_MX1ADS +#include "mx1ads.h" +#endif + +#endif diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h new file mode 100644 index 000000000000..f32c203952cf --- /dev/null +++ b/include/asm-arm/arch-imx/imx-regs.h @@ -0,0 +1,548 @@ +#ifndef _IMX_REGS_H +#define _IMX_REGS_H +/* ------------------------------------------------------------------------ + * Motorola IMX system registers + * ------------------------------------------------------------------------ + * + */ + +/* + * Register BASEs, based on OFFSETs + * + */ +#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) +#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE) +#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE) +#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE) +#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE) +#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE) +#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE) +#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE) +#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE) +#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE) +#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE) +#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE) +#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE) +#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE) +#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE) +#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE) +#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE) +#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE) +#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE) +#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE) +#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE) +#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE) +#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE) +#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE) +#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE) +#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE) +#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE) +#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE) + +/* PLL registers */ +#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ +#define CSCR_SYSTEM_SEL (1<<16) + +#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ +#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ +#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */ +#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ +#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ + +#define CSCR_MPLL_RESTART (1<<21) + +/* + * GPIO Module and I/O Multiplexer + * x = 0..3 for reg_A, reg_B, reg_C, reg_D + */ +#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8) +#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8) +#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8) +#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8) +#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8) +#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8) +#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8) +#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8) +#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8) +#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8) +#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8) +#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8) +#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8) +#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8) +#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8) +#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8) +#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8) + +#define GPIO_PIN_MASK 0x1f +#define GPIO_PORT_MASK (0x3 << 5) + +#define GPIO_PORTA (0<<5) +#define GPIO_PORTB (1<<5) +#define GPIO_PORTC (2<<5) +#define GPIO_PORTD (3<<5) + +#define GPIO_OUT (1<<7) +#define GPIO_IN (0<<7) +#define GPIO_PUEN (1<<8) + +#define GPIO_PF (0<<9) +#define GPIO_AF (1<<9) + +#define GPIO_OCR_MASK (3<<10) +#define GPIO_AIN (0<<10) +#define GPIO_BIN (1<<10) +#define GPIO_CIN (2<<10) +#define GPIO_GPIO (3<<10) + +#define GPIO_AOUT (1<<12) +#define GPIO_BOUT (1<<13) + +/* assignements for GPIO alternate/primary functions */ + +/* FIXME: This list is not completed. The correct directions are + * missing on some (many) pins + */ +#define PA0_PF_A24 ( GPIO_PORTA | GPIO_PF | 0 ) +#define PA0_AIN_SPI2_CLK ( GPIO_PORTA | GPIO_OUT | GPIO_AIN | 0 ) +#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) +#define PA1_AOUT_SPI2_RXD ( GPIO_PORTA | GPIO_IN | GPIO_AOUT | 1 ) +#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) +#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) +#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) +#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 ) +#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 ) +#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 ) +#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 ) +#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 ) +#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 ) +#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 ) +#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 ) +#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 ) +#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 ) +#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 ) +#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) +#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) +#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) +#define PA17_AIN_SPI2_SS ( GPIO_PORTA | GPIO_AIN | 17 ) +#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) +#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) +#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) +#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 ) +#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 ) +#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 ) +#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 ) +#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 ) +#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 ) +#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 ) +#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 ) +#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 ) +#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 ) +#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 ) +#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 ) +#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 ) +#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 ) +#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 ) +#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 ) +#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 ) +#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 ) +#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 ) +#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 ) +#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 ) +#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 ) +#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 ) +#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 ) +#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 ) +#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 ) +#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 ) +#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 ) +#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 ) +#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 ) +#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 ) +#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 ) +#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 ) +#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 ) +#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 ) +#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 ) +#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 ) +#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 ) +#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 ) +#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 ) +#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 ) +#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 ) +#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 ) +#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 ) +#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 ) +#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 ) +#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 ) +#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 ) +#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 ) +#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 ) +#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 ) +#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 ) +#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 ) +#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 ) +#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 ) +#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 ) +#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 ) +#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 ) +#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 ) +#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 ) +#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 ) +#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) +#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) +#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) +#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) +#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) +#define PD7_AF_UART2_DTR ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) +#define PD7_AIN_SPI2_SCLK ( GPIO_PORTD | GPIO_AIN | 7 ) +#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) +#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) +#define PD8_AIN_SPI2_SS ( GPIO_PORTD | GPIO_AIN | 8 ) +#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) +#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) +#define PD9_AOUT_SPI2_RXD ( GPIO_PORTD | GPIO_IN | GPIO_AOUT | 9 ) +#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) +#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) +#define PD10_AIN_SPI2_TXD ( GPIO_PORTD | GPIO_OUT | GPIO_AIN | 10 ) +#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) +#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) +#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) +#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 ) +#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 ) +#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 ) +#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 ) +#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 ) +#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 ) +#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 ) +#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 ) +#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 ) +#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 ) +#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 ) +#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 ) +#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 ) +#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 ) +#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 ) +#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) +#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) +#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) +#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 ) + +/* + * DMA Controller + */ +#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */ +#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */ +#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */ +#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */ +#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */ +#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */ +#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */ +#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */ +#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */ +#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */ +#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */ +#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */ +#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */ +#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */ +#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */ +#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */ +#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */ +#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */ +#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */ +#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */ +#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */ +#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */ + +#define DCR_DRST (1<<1) +#define DCR_DEN (1<<0) +#define DBTOCR_EN (1<<15) +#define DBTOCR_CNT(x) ((x) & 0x7fff ) +#define CNTR_CNT(x) ((x) & 0xffffff ) +#define CCR_DMOD_LINEAR ( 0x0 << 12 ) +#define CCR_DMOD_2D ( 0x1 << 12 ) +#define CCR_DMOD_FIFO ( 0x2 << 12 ) +#define CCR_DMOD_EOBFIFO ( 0x3 << 12 ) +#define CCR_SMOD_LINEAR ( 0x0 << 10 ) +#define CCR_SMOD_2D ( 0x1 << 10 ) +#define CCR_SMOD_FIFO ( 0x2 << 10 ) +#define CCR_SMOD_EOBFIFO ( 0x3 << 10 ) +#define CCR_MDIR_DEC (1<<9) +#define CCR_MSEL_B (1<<8) +#define CCR_DSIZ_32 ( 0x0 << 6 ) +#define CCR_DSIZ_8 ( 0x1 << 6 ) +#define CCR_DSIZ_16 ( 0x2 << 6 ) +#define CCR_SSIZ_32 ( 0x0 << 4 ) +#define CCR_SSIZ_8 ( 0x1 << 4 ) +#define CCR_SSIZ_16 ( 0x2 << 4 ) +#define CCR_REN (1<<3) +#define CCR_RPT (1<<2) +#define CCR_FRC (1<<1) +#define CCR_CEN (1<<0) +#define RTOR_EN (1<<15) +#define RTOR_CLK (1<<14) +#define RTOR_PSC (1<<13) + +/* + * Interrupt controller + */ + +#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00) +#define INTCNTL_FIAD (1<<19) +#define INTCNTL_NIAD (1<<20) + +#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04) +#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08) +#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c) +#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10) +#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14) + +/* + * General purpose timers + */ +#define IMX_TCTL(x) __REG( 0x00 + (x)) +#define TCTL_SWR (1<<15) +#define TCTL_FRR (1<<8) +#define TCTL_CAP_RIS (1<<6) +#define TCTL_CAP_FAL (2<<6) +#define TCTL_CAP_RIS_FAL (3<<6) +#define TCTL_OM (1<<5) +#define TCTL_IRQEN (1<<4) +#define TCTL_CLK_PCLK1 (1<<1) +#define TCTL_CLK_PCLK1_16 (2<<1) +#define TCTL_CLK_TIN (3<<1) +#define TCTL_CLK_32 (4<<1) +#define TCTL_TEN (1<<0) + +#define IMX_TPRER(x) __REG( 0x04 + (x)) +#define IMX_TCMP(x) __REG( 0x08 + (x)) +#define IMX_TCR(x) __REG( 0x0C + (x)) +#define IMX_TCN(x) __REG( 0x10 + (x)) +#define IMX_TSTAT(x) __REG( 0x14 + (x)) +#define TSTAT_CAPT (1<<1) +#define TSTAT_COMP (1<<0) + +/* + * LCD Controller + */ + +#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00) + +#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04) +#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) +#define SIZE_YMAX(y) ( (y) & 0x1ff ) + +#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08) +#define VPW_VPW(x) ( (x) & 0x3ff ) + +#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C) +#define CPOS_CC1 (1<<31) +#define CPOS_CC0 (1<<30) +#define CPOS_OP (1<<28) +#define CPOS_CXP(x) (((x) & 3ff) << 16) +#define CPOS_CYP(y) ((y) & 0x1ff) + +#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10) +#define LCWHB_BK_EN (1<<31) +#define LCWHB_CW(w) (((w) & 0x1f) << 24) +#define LCWHB_CH(h) (((h) & 0x1f) << 16) +#define LCWHB_BD(x) ((x) & 0xff) + +#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14) +#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) +#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) +#define LCHCC_CUR_COL_B(b) ((b) & 0x1f) + +#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18) +#define PCR_TFT (1<<31) +#define PCR_COLOR (1<<30) +#define PCR_PBSIZ_1 (0<<28) +#define PCR_PBSIZ_2 (1<<28) +#define PCR_PBSIZ_4 (2<<28) +#define PCR_PBSIZ_8 (3<<28) +#define PCR_BPIX_1 (0<<25) +#define PCR_BPIX_2 (1<<25) +#define PCR_BPIX_4 (2<<25) +#define PCR_BPIX_8 (3<<25) +#define PCR_BPIX_12 (4<<25) +#define PCR_BPIX_16 (4<<25) +#define PCR_PIXPOL (1<<24) +#define PCR_FLMPOL (1<<23) +#define PCR_LPPOL (1<<22) +#define PCR_CLKPOL (1<<21) +#define PCR_OEPOL (1<<20) +#define PCR_SCLKIDLE (1<<19) +#define PCR_END_SEL (1<<18) +#define PCR_END_BYTE_SWAP (1<<17) +#define PCR_REV_VS (1<<16) +#define PCR_ACD_SEL (1<<15) +#define PCR_ACD(x) (((x) & 0x7f) << 8) +#define PCR_SCLK_SEL (1<<7) +#define PCR_SHARP (1<<6) +#define PCR_PCD(x) ((x) & 0x3f) + +#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C) +#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26) +#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8) +#define HCR_H_WAIT_2(x) ((x) & 0xff) + +#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20) +#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26) +#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8) +#define VCR_V_WAIT_2(x) ((x) & 0xff) + +#define LCDC_POS __REG(IMX_LCDC_BASE+0x24) +#define POS_POS(x) ((x) & 1f) + +#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28) +#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) +#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) +#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) +#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) +#define LSCR1_GRAY1(x) (((x) & 0xf)) + +#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C) +#define PWMR_CLS(x) (((x) & 0x1ff) << 16) +#define PWMR_LDMSK (1<<15) +#define PWMR_SCR1 (1<<10) +#define PWMR_SCR0 (1<<9) +#define PWMR_CC_EN (1<<8) +#define PWMR_PW(x) ((x) & 0xff) + +#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30) +#define DMACR_BURST (1<<31) +#define DMACR_HM(x) (((x) & 0xf) << 16) +#define DMACR_TM(x) ((x) &0xf) + +#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34) +#define RMCR_LCDC_EN (1<<1) +#define RMCR_SELF_REF (1<<0) + +#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38) +#define LCDICR_INT_SYN (1<<2) +#define LCDICR_INT_CON (1) + +#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40) +#define LCDISR_UDR_ERR (1<<3) +#define LCDISR_ERR_RES (1<<2) +#define LCDISR_EOF (1<<1) +#define LCDISR_BOF (1<<0) + +/* + * UART Module. Takes the UART base address as argument + */ +#define URXD0(x) __REG( 0x0 + (x)) /* Receiver Register */ +#define URTX0(x) __REG( 0x40 + (x)) /* Transmitter Register */ +#define UCR1(x) __REG( 0x80 + (x)) /* Control Register 1 */ +#define UCR2(x) __REG( 0x84 + (x)) /* Control Register 2 */ +#define UCR3(x) __REG( 0x88 + (x)) /* Control Register 3 */ +#define UCR4(x) __REG( 0x8c + (x)) /* Control Register 4 */ +#define UFCR(x) __REG( 0x90 + (x)) /* FIFO Control Register */ +#define USR1(x) __REG( 0x94 + (x)) /* Status Register 1 */ +#define USR2(x) __REG( 0x98 + (x)) /* Status Register 2 */ +#define UESC(x) __REG( 0x9c + (x)) /* Escape Character Register */ +#define UTIM(x) __REG( 0xa0 + (x)) /* Escape Timer Register */ +#define UBIR(x) __REG( 0xa4 + (x)) /* BRM Incremental Register */ +#define UBMR(x) __REG( 0xa8 + (x)) /* BRM Modulator Register */ +#define UBRC(x) __REG( 0xac + (x)) /* Baud Rate Count Register */ +#define BIPR1(x) __REG( 0xb0 + (x)) /* Incremental Preset Register 1 */ +#define BIPR2(x) __REG( 0xb4 + (x)) /* Incremental Preset Register 2 */ +#define BIPR3(x) __REG( 0xb8 + (x)) /* Incremental Preset Register 3 */ +#define BIPR4(x) __REG( 0xbc + (x)) /* Incremental Preset Register 4 */ +#define BMPR1(x) __REG( 0xc0 + (x)) /* BRM Modulator Register 1 */ +#define BMPR2(x) __REG( 0xc4 + (x)) /* BRM Modulator Register 2 */ +#define BMPR3(x) __REG( 0xc8 + (x)) /* BRM Modulator Register 3 */ +#define BMPR4(x) __REG( 0xcc + (x)) /* BRM Modulator Register 4 */ +#define UTS(x) __REG( 0xd0 + (x)) /* UART Test Register */ + +/* UART Control Register Bit Fields.*/ +#define URXD_CHARRDY (1<<15) +#define URXD_ERR (1<<14) +#define URXD_OVRRUN (1<<13) +#define URXD_FRMERR (1<<12) +#define URXD_BRK (1<<11) +#define URXD_PRERR (1<<10) +#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ +#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ +#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ +#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ +#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ +#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ +#define UCR1_IREN (1<<7) /* Infrared interface enable */ +#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ +#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ +#define UCR1_SNDBRK (1<<4) /* Send break */ +#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ +#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ +#define UCR1_DOZE (1<<1) /* Doze */ +#define UCR1_UARTEN (1<<0) /* UART enabled */ +#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ +#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ +#define UCR2_CTSC (1<<13) /* CTS pin control */ +#define UCR2_CTS (1<<12) /* Clear to send */ +#define UCR2_ESCEN (1<<11) /* Escape enable */ +#define UCR2_PREN (1<<8) /* Parity enable */ +#define UCR2_PROE (1<<7) /* Parity odd/even */ +#define UCR2_STPB (1<<6) /* Stop */ +#define UCR2_WS (1<<5) /* Word size */ +#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ +#define UCR2_TXEN (1<<2) /* Transmitter enabled */ +#define UCR2_RXEN (1<<1) /* Receiver enabled */ +#define UCR2_SRST (1<<0) /* SW reset */ +#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ +#define UCR3_PARERREN (1<<12) /* Parity enable */ +#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ +#define UCR3_DSR (1<<10) /* Data set ready */ +#define UCR3_DCD (1<<9) /* Data carrier detect */ +#define UCR3_RI (1<<8) /* Ring indicator */ +#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ +#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ +#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ +#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ +#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ +#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ +#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ +#define UCR3_BPEN (1<<0) /* Preset registers enable */ +#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ +#define UCR4_INVR (1<<9) /* Inverted infrared reception */ +#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ +#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ +#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ +#define UCR4_IRSC (1<<5) /* IR special case */ +#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ +#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ +#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ +#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ +#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ +#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ +#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ +#define USR1_RTSS (1<<14) /* RTS pin status */ +#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ +#define USR1_RTSD (1<<12) /* RTS delta */ +#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ +#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ +#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ +#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ +#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ +#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ +#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ +#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ +#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ +#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ +#define USR2_IDLE (1<<12) /* Idle condition */ +#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ +#define USR2_WAKE (1<<7) /* Wake */ +#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ +#define USR2_TXDC (1<<3) /* Transmitter complete */ +#define USR2_BRCD (1<<2) /* Break condition */ +#define USR2_ORE (1<<1) /* Overrun error */ +#define USR2_RDR (1<<0) /* Recv data ready */ +#define UTS_FRCPERR (1<<13) /* Force parity error */ +#define UTS_LOOP (1<<12) /* Loop tx and rx */ +#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ +#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ +#define UTS_TXFULL (1<<4) /* TxFIFO full */ +#define UTS_RXFULL (1<<3) /* RxFIFO full */ +#define UTS_SOFTRST (1<<0) /* Software reset */ + +#endif // _IMX_REGS_H diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h new file mode 100644 index 000000000000..28a4cca6a4cb --- /dev/null +++ b/include/asm-arm/arch-imx/io.h @@ -0,0 +1,28 @@ +/* + * linux/include/asm-arm/arch-imxads/io.h + * + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + +#endif diff --git a/include/asm-arm/arch-imx/irq.h b/include/asm-arm/arch-imx/irq.h new file mode 100644 index 000000000000..545e065d2325 --- /dev/null +++ b/include/asm-arm/arch-imx/irq.h @@ -0,0 +1,20 @@ +/* + * linux/include/asm-arm/arch-imxads/irq.h + * + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define fixup_irq(i) (i) diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h new file mode 100644 index 000000000000..238197cfb9d9 --- /dev/null +++ b/include/asm-arm/arch-imx/irqs.h @@ -0,0 +1,116 @@ +/* + * linux/include/asm-arm/arch-imxads/irqs.h + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ARM_IRQS_H__ +#define __ARM_IRQS_H__ + +/* Use the imx definitions */ +#include <asm/arch/hardware.h> + +/* + * IMX Interrupt numbers + * + */ +#define INT_SOFTINT 0 +#define CSI_INT 6 +#define DSPA_MAC_INT 7 +#define DSPA_INT 8 +#define COMP_INT 9 +#define MSHC_XINT 10 +#define GPIO_INT_PORTA 11 +#define GPIO_INT_PORTB 12 +#define GPIO_INT_PORTC 13 +#define LCDC_INT 14 +#define SIM_INT 15 +#define SIM_DATA_INT 16 +#define RTC_INT 17 +#define RTC_SAMINT 18 +#define UART2_MINT_PFERR 19 +#define UART2_MINT_RTS 20 +#define UART2_MINT_DTR 21 +#define UART2_MINT_UARTC 22 +#define UART2_MINT_TX 23 +#define UART2_MINT_RX 24 +#define UART1_MINT_PFERR 25 +#define UART1_MINT_RTS 26 +#define UART1_MINT_DTR 27 +#define UART1_MINT_UARTC 28 +#define UART1_MINT_TX 29 +#define UART1_MINT_RX 30 +#define VOICE_DAC_INT 31 +#define VOICE_ADC_INT 32 +#define PEN_DATA_INT 33 +#define PWM_INT 34 +#define SDHC_INT 35 +#define I2C_INT 39 +#define CSPI_INT 41 +#define SSI_TX_INT 42 +#define SSI_TX_ERR_INT 43 +#define SSI_RX_INT 44 +#define SSI_RX_ERR_INT 45 +#define TOUCH_INT 46 +#define USBD_INT0 47 +#define USBD_INT1 48 +#define USBD_INT2 49 +#define USBD_INT3 50 +#define USBD_INT4 51 +#define USBD_INT5 52 +#define USBD_INT6 53 +#define BTSYS_INT 55 +#define BTTIM_INT 56 +#define BTWUI_INT 57 +#define TIM2_INT 58 +#define TIM1_INT 59 +#define DMA_ERR 60 +#define DMA_INT 61 +#define GPIO_INT_PORTD 62 + +#define IMX_IRQS (64) + +/* note: the IMX has four gpio ports (A-D), but only + * the following pins are connected to the outside + * world: + * + * PORT A: bits 0-31 + * PORT B: bits 8-31 + * PORT C: bits 3-17 + * PORT D: bits 6-31 + * + * We map these interrupts straight on. As a result we have + * several holes in the interrupt mapping. We do this for two + * reasons: + * - mapping the interrupts without holes would get + * far more complicated + * - Motorola could well decide to bring some processor + * with more pins connected + */ + +#define IRQ_GPIOA(x) (IMX_IRQS + x) +#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) +#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) +#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) + +/* decode irq number to use with IMR(x), ISR(x) and friends */ +#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5) + +#define NR_IRQS (IRQ_GPIOD(32) + 1) +#define IRQ_GPIO(x) +#endif diff --git a/include/asm-arm/arch-imx/memory.h b/include/asm-arm/arch-imx/memory.h new file mode 100644 index 000000000000..116a91fa14f1 --- /dev/null +++ b/include/asm-arm/arch-imx/memory.h @@ -0,0 +1,38 @@ +/* + * linux/include/asm-arm/arch-imx/memory.h + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MMU_H +#define __ASM_ARCH_MMU_H + +#define PHYS_OFFSET (0x08000000UL) + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#define __virt_to_bus__is_a_macro +#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET) +#define __bus_to_virt__is_a_macro +#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET) + +#endif diff --git a/include/asm-arm/arch-imx/mx1ads.h b/include/asm-arm/arch-imx/mx1ads.h new file mode 100644 index 000000000000..d90fa4b49ce1 --- /dev/null +++ b/include/asm-arm/arch-imx/mx1ads.h @@ -0,0 +1,36 @@ +/* + * linux/include/asm-arm/arch-imx/mx1ads.h + * + * Copyright (C) 2004 Robert Schwebel, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_MX1ADS_H +#define __ASM_ARCH_MX1ADS_H + +/* ------------------------------------------------------------------------ */ +/* Memory Map for the M9328MX1ADS (MX1ADS) Board */ +/* ------------------------------------------------------------------------ */ + +#define MX1ADS_FLASH_PHYS 0x10000000 +#define MX1ADS_FLASH_SIZE (16*1024*1024) + +#define IMX_FB_PHYS (0x0C000000 - 0x40000) + +#define CLK32 32000 + +#endif /* __ASM_ARCH_MX1ADS_H */ diff --git a/include/asm-arm/arch-imx/param.h b/include/asm-arm/arch-imx/param.h new file mode 100644 index 000000000000..7c724f03333e --- /dev/null +++ b/include/asm-arm/arch-imx/param.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm-arm/arch-imx/param.h + * + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ diff --git a/include/asm-arm/arch-imx/system.h b/include/asm-arm/arch-imx/system.h new file mode 100644 index 000000000000..c645fe9afb9d --- /dev/null +++ b/include/asm-arm/arch-imx/system.h @@ -0,0 +1,40 @@ +/* + * linux/include/asm-arm/arch-imxads/system.h + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static void +arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void +arch_reset(char mode) +{ + cpu_reset(0); +} + +#endif diff --git a/include/asm-arm/arch-imx/timex.h b/include/asm-arm/arch-imx/timex.h new file mode 100644 index 000000000000..d65ab3cd5d5d --- /dev/null +++ b/include/asm-arm/arch-imx/timex.h @@ -0,0 +1,27 @@ +/* + * linux/include/asm-arm/imx/timex.h + * + * Copyright (C) 1999 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#include <asm/arch/hardware.h> +#define CLOCK_TICK_RATE (CLK32) + +#endif diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h new file mode 100644 index 000000000000..096077f2750b --- /dev/null +++ b/include/asm-arm/arch-imx/uncompress.h @@ -0,0 +1,78 @@ +/* + * linux/include/asm-arm/arch-imxads/uncompress.h + * + * + * + * Copyright (C) 1999 ARM Limited + * Copyright (C) Shane Nay (shane@minirl.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) + +#define UART1_BASE 0x206000 +#define UART2_BASE 0x207000 +#define USR2 0x98 +#define USR2_TXFE (1<<14) +#define TXR 0x40 +#define UCR1 0x80 +#define UCR1_UARTEN 1 + +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. We search for the first enabled + * port in the most probable order. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ +static void +putstr(const char *s) +{ + unsigned long serial_port; + + do { + serial_port = UART1_BASE; + if ( UART(UCR1) & UCR1_UARTEN ) + break; + serial_port = UART2_BASE; + if ( UART(UCR1) & UCR1_UARTEN ) + break; + return; + } while(0); + + while (*s) { + while ( !(UART(USR2) & USR2_TXFE) ) + barrier(); + + UART(TXR) = *s; + + if (*s == '\n') { + while ( !(UART(USR2) & USR2_TXFE) ) + barrier(); + + UART(TXR) = '\r'; + } + s++; + } +} + +/* + * nothing to do + */ +#define arch_decomp_setup() + +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-imx/vmalloc.h b/include/asm-arm/arch-imx/vmalloc.h new file mode 100644 index 000000000000..252038f48163 --- /dev/null +++ b/include/asm-arm/arch-imx/vmalloc.h @@ -0,0 +1,32 @@ +/* + * linux/include/asm-arm/arch-imx/vmalloc.h + * + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + */ +#define VMALLOC_OFFSET (8*1024*1024) +#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) +#define VMALLOC_VMADDR(x) ((unsigned long)(x)) +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) |