aboutsummaryrefslogtreecommitdiff
path: root/include/asm-arm/uaccess.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/uaccess.h')
-rw-r--r--include/asm-arm/uaccess.h444
1 files changed, 0 insertions, 444 deletions
diff --git a/include/asm-arm/uaccess.h b/include/asm-arm/uaccess.h
deleted file mode 100644
index 4c1a3fa9f259..000000000000
--- a/include/asm-arm/uaccess.h
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * linux/include/asm-arm/uaccess.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_UACCESS_H
-#define _ASMARM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <asm/errno.h>
-#include <asm/memory.h>
-#include <asm/domain.h>
-#include <asm/system.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These two are intentionally not defined anywhere - if the kernel
- * code generates any references to them, that's a bug.
- */
-extern int __get_user_bad(void);
-extern int __put_user_bad(void);
-
-/*
- * Note that this is actually 0x1,0000,0000
- */
-#define KERNEL_DS 0x00000000
-#define get_ds() (KERNEL_DS)
-
-#ifdef CONFIG_MMU
-
-#define USER_DS TASK_SIZE
-#define get_fs() (current_thread_info()->addr_limit)
-
-static inline void set_fs(mm_segment_t fs)
-{
- current_thread_info()->addr_limit = fs;
- modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
-}
-
-#define segment_eq(a,b) ((a) == (b))
-
-#define __addr_ok(addr) ({ \
- unsigned long flag; \
- __asm__("cmp %2, %0; movlo %0, #0" \
- : "=&r" (flag) \
- : "0" (current_thread_info()->addr_limit), "r" (addr) \
- : "cc"); \
- (flag == 0); })
-
-/* We use 33-bit arithmetic here... */
-#define __range_ok(addr,size) ({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- __asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
- : "=&r" (flag), "=&r" (roksum) \
- : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
- : "cc"); \
- flag; })
-
-/*
- * Single-value transfer routines. They automatically use the right
- * size if we just have the right pointer type. Note that the functions
- * which read from user space (*get_*) need to take care not to leak
- * kernel data even if the calling code is buggy and fails to check
- * the return value. This means zeroing out the destination variable
- * or buffer on error. Normally this is done out of line by the
- * fixup code, but there are a few places where it intrudes on the
- * main code path. When we only write to user space, there is no
- * problem.
- */
-extern int __get_user_1(void *);
-extern int __get_user_2(void *);
-extern int __get_user_4(void *);
-
-#define __get_user_x(__r2,__p,__e,__s,__i...) \
- __asm__ __volatile__ ( \
- __asmeq("%0", "r0") __asmeq("%1", "r2") \
- "bl __get_user_" #__s \
- : "=&r" (__e), "=r" (__r2) \
- : "0" (__p) \
- : __i, "cc")
-
-#define get_user(x,p) \
- ({ \
- register const typeof(*(p)) __user *__p asm("r0") = (p);\
- register unsigned long __r2 asm("r2"); \
- register int __e asm("r0"); \
- switch (sizeof(*(__p))) { \
- case 1: \
- __get_user_x(__r2, __p, __e, 1, "lr"); \
- break; \
- case 2: \
- __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \
- break; \
- case 4: \
- __get_user_x(__r2, __p, __e, 4, "lr"); \
- break; \
- default: __e = __get_user_bad(); break; \
- } \
- x = (typeof(*(p))) __r2; \
- __e; \
- })
-
-extern int __put_user_1(void *, unsigned int);
-extern int __put_user_2(void *, unsigned int);
-extern int __put_user_4(void *, unsigned int);
-extern int __put_user_8(void *, unsigned long long);
-
-#define __put_user_x(__r2,__p,__e,__s) \
- __asm__ __volatile__ ( \
- __asmeq("%0", "r0") __asmeq("%2", "r2") \
- "bl __put_user_" #__s \
- : "=&r" (__e) \
- : "0" (__p), "r" (__r2) \
- : "ip", "lr", "cc")
-
-#define put_user(x,p) \
- ({ \
- register const typeof(*(p)) __r2 asm("r2") = (x); \
- register const typeof(*(p)) __user *__p asm("r0") = (p);\
- register int __e asm("r0"); \
- switch (sizeof(*(__p))) { \
- case 1: \
- __put_user_x(__r2, __p, __e, 1); \
- break; \
- case 2: \
- __put_user_x(__r2, __p, __e, 2); \
- break; \
- case 4: \
- __put_user_x(__r2, __p, __e, 4); \
- break; \
- case 8: \
- __put_user_x(__r2, __p, __e, 8); \
- break; \
- default: __e = __put_user_bad(); break; \
- } \
- __e; \
- })
-
-#else /* CONFIG_MMU */
-
-/*
- * uClinux has only one addr space, so has simplified address limits.
- */
-#define USER_DS KERNEL_DS
-
-#define segment_eq(a,b) (1)
-#define __addr_ok(addr) (1)
-#define __range_ok(addr,size) (0)
-#define get_fs() (KERNEL_DS)
-
-static inline void set_fs(mm_segment_t fs)
-{
-}
-
-#define get_user(x,p) __get_user(x,p)
-#define put_user(x,p) __put_user(x,p)
-
-#endif /* CONFIG_MMU */
-
-#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
-
-/*
- * The "__xxx" versions of the user access functions do not verify the
- * address space - it must have been done previously with a separate
- * "access_ok()" call.
- *
- * The "xxx_error" versions set the third argument to EFAULT if an
- * error occurs, and leave it unchanged on success. Note that these
- * versions are void (ie, don't return a value as such).
- */
-#define __get_user(x,ptr) \
-({ \
- long __gu_err = 0; \
- __get_user_err((x),(ptr),__gu_err); \
- __gu_err; \
-})
-
-#define __get_user_error(x,ptr,err) \
-({ \
- __get_user_err((x),(ptr),err); \
- (void) 0; \
-})
-
-#define __get_user_err(x,ptr,err) \
-do { \
- unsigned long __gu_addr = (unsigned long)(ptr); \
- unsigned long __gu_val; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \
- case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \
- case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \
- default: (__gu_val) = __get_user_bad(); \
- } \
- (x) = (__typeof__(*(ptr)))__gu_val; \
-} while (0)
-
-#define __get_user_asm_byte(x,addr,err) \
- __asm__ __volatile__( \
- "1: ldrbt %1,[%2],#0\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- " .align 2\n" \
- "3: mov %0, %3\n" \
- " mov %1, #0\n" \
- " b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 3b\n" \
- " .previous" \
- : "+r" (err), "=&r" (x) \
- : "r" (addr), "i" (-EFAULT) \
- : "cc")
-
-#ifndef __ARMEB__
-#define __get_user_asm_half(x,__gu_addr,err) \
-({ \
- unsigned long __b1, __b2; \
- __get_user_asm_byte(__b1, __gu_addr, err); \
- __get_user_asm_byte(__b2, __gu_addr + 1, err); \
- (x) = __b1 | (__b2 << 8); \
-})
-#else
-#define __get_user_asm_half(x,__gu_addr,err) \
-({ \
- unsigned long __b1, __b2; \
- __get_user_asm_byte(__b1, __gu_addr, err); \
- __get_user_asm_byte(__b2, __gu_addr + 1, err); \
- (x) = (__b1 << 8) | __b2; \
-})
-#endif
-
-#define __get_user_asm_word(x,addr,err) \
- __asm__ __volatile__( \
- "1: ldrt %1,[%2],#0\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- " .align 2\n" \
- "3: mov %0, %3\n" \
- " mov %1, #0\n" \
- " b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 3b\n" \
- " .previous" \
- : "+r" (err), "=&r" (x) \
- : "r" (addr), "i" (-EFAULT) \
- : "cc")
-
-#define __put_user(x,ptr) \
-({ \
- long __pu_err = 0; \
- __put_user_err((x),(ptr),__pu_err); \
- __pu_err; \
-})
-
-#define __put_user_error(x,ptr,err) \
-({ \
- __put_user_err((x),(ptr),err); \
- (void) 0; \
-})
-
-#define __put_user_err(x,ptr,err) \
-do { \
- unsigned long __pu_addr = (unsigned long)(ptr); \
- __typeof__(*(ptr)) __pu_val = (x); \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \
- case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \
- case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \
- case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \
- default: __put_user_bad(); \
- } \
-} while (0)
-
-#define __put_user_asm_byte(x,__pu_addr,err) \
- __asm__ __volatile__( \
- "1: strbt %1,[%2],#0\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- " .align 2\n" \
- "3: mov %0, %3\n" \
- " b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 3b\n" \
- " .previous" \
- : "+r" (err) \
- : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
- : "cc")
-
-#ifndef __ARMEB__
-#define __put_user_asm_half(x,__pu_addr,err) \
-({ \
- unsigned long __temp = (unsigned long)(x); \
- __put_user_asm_byte(__temp, __pu_addr, err); \
- __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \
-})
-#else
-#define __put_user_asm_half(x,__pu_addr,err) \
-({ \
- unsigned long __temp = (unsigned long)(x); \
- __put_user_asm_byte(__temp >> 8, __pu_addr, err); \
- __put_user_asm_byte(__temp, __pu_addr + 1, err); \
-})
-#endif
-
-#define __put_user_asm_word(x,__pu_addr,err) \
- __asm__ __volatile__( \
- "1: strt %1,[%2],#0\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- " .align 2\n" \
- "3: mov %0, %3\n" \
- " b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 3b\n" \
- " .previous" \
- : "+r" (err) \
- : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
- : "cc")
-
-#ifndef __ARMEB__
-#define __reg_oper0 "%R2"
-#define __reg_oper1 "%Q2"
-#else
-#define __reg_oper0 "%Q2"
-#define __reg_oper1 "%R2"
-#endif
-
-#define __put_user_asm_dword(x,__pu_addr,err) \
- __asm__ __volatile__( \
- "1: strt " __reg_oper1 ", [%1], #4\n" \
- "2: strt " __reg_oper0 ", [%1], #0\n" \
- "3:\n" \
- " .section .fixup,\"ax\"\n" \
- " .align 2\n" \
- "4: mov %0, %3\n" \
- " b 3b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
- " .align 3\n" \
- " .long 1b, 4b\n" \
- " .long 2b, 4b\n" \
- " .previous" \
- : "+r" (err), "+r" (__pu_addr) \
- : "r" (x), "i" (-EFAULT) \
- : "cc")
-
-
-#ifdef CONFIG_MMU
-extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
-extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
-extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
-#else
-#define __copy_from_user(to,from,n) (memcpy(to, (void __force *)from, n), 0)
-#define __copy_to_user(to,from,n) (memcpy((void __force *)to, from, n), 0)
-#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0)
-#endif
-
-extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
-extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
-
-static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- if (access_ok(VERIFY_READ, from, n))
- n = __copy_from_user(to, from, n);
- else /* security hole - plug it */
- memzero(to, n);
- return n;
-}
-
-static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- if (access_ok(VERIFY_WRITE, to, n))
- n = __copy_to_user(to, from, n);
- return n;
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
-{
- if (access_ok(VERIFY_WRITE, to, n))
- n = __clear_user(to, n);
- return n;
-}
-
-static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res = -EFAULT;
- if (access_ok(VERIFY_READ, src, 1))
- res = __strncpy_from_user(dst, src, count);
- return res;
-}
-
-#define strlen_user(s) strnlen_user(s, ~0UL >> 1)
-
-static inline long __must_check strnlen_user(const char __user *s, long n)
-{
- unsigned long res = 0;
-
- if (__addr_ok(s))
- res = __strnlen_user(s, n);
-
- return res;
-}
-
-#endif /* _ASMARM_UACCESS_H */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 23:03:51 +0000