diff options
Diffstat (limited to 'include/linux/ixjuser.h')
| -rw-r--r-- | include/linux/ixjuser.h | 720 |
1 files changed, 0 insertions, 720 deletions
diff --git a/include/linux/ixjuser.h b/include/linux/ixjuser.h deleted file mode 100644 index 94ab5e942e53..000000000000 --- a/include/linux/ixjuser.h +++ /dev/null @@ -1,720 +0,0 @@ -#ifndef __LINUX_IXJUSER_H -#define __LINUX_IXJUSER_H - -/****************************************************************************** - * - * ixjuser.h - * - * Device Driver for Quicknet Technologies, Inc.'s Telephony cards - * including the Internet PhoneJACK, Internet PhoneJACK Lite, - * Internet PhoneJACK PCI, Internet LineJACK, Internet PhoneCARD and - * SmartCABLE - * - * (c) Copyright 1999-2001 Quicknet Technologies, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Author: Ed Okerson, <eokerson@quicknet.net> - * - * Contributors: Greg Herlein, <gherlein@quicknet.net> - * David W. Erhart, <derhart@quicknet.net> - * John Sellers, <jsellers@quicknet.net> - * Mike Preston, <mpreston@quicknet.net> - * - * More information about the hardware related to this driver can be found - * at our website: http://www.quicknet.net - * - * Fixes: - * - * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR - * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT - * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF QUICKNET - * TECHNOLOGIES, INC.HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * QUICKNET TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS - * ON AN "AS IS" BASIS, AND QUICKNET TECHNOLOGIES, INC. HAS NO OBLIGATION - * TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. - * - *****************************************************************************/ - -#include <linux/telephony.h> - - -/****************************************************************************** -* -* IOCTL's used for the Quicknet Telephony Cards -* -* If you use the IXJCTL_TESTRAM command, the card must be power cycled to -* reset the SRAM values before further use. -* -******************************************************************************/ - -#define IXJCTL_DSP_RESET _IO ('q', 0xC0) - -#define IXJCTL_RING PHONE_RING -#define IXJCTL_HOOKSTATE PHONE_HOOKSTATE -#define IXJCTL_MAXRINGS PHONE_MAXRINGS -#define IXJCTL_RING_CADENCE PHONE_RING_CADENCE -#define IXJCTL_RING_START PHONE_RING_START -#define IXJCTL_RING_STOP PHONE_RING_STOP - -#define IXJCTL_CARDTYPE _IOR ('q', 0xC1, int) -#define IXJCTL_SERIAL _IOR ('q', 0xC2, int) -#define IXJCTL_DSP_TYPE _IOR ('q', 0xC3, int) -#define IXJCTL_DSP_VERSION _IOR ('q', 0xC4, int) -#define IXJCTL_VERSION _IOR ('q', 0xDA, char *) -#define IXJCTL_DSP_IDLE _IO ('q', 0xC5) -#define IXJCTL_TESTRAM _IO ('q', 0xC6) - -/****************************************************************************** -* -* This group of IOCTLs deal with the record settings of the DSP -* -* The IXJCTL_REC_DEPTH command sets the internal buffer depth of the DSP. -* Setting a lower depth reduces latency, but increases the demand of the -* application to service the driver without frame loss. The DSP has 480 -* bytes of physical buffer memory for the record channel so the true -* maximum limit is determined by how many frames will fit in the buffer. -* -* 1 uncompressed (480 byte) 16-bit linear frame. -* 2 uncompressed (240 byte) 8-bit A-law/mu-law frames. -* 15 TrueSpeech 8.5 frames. -* 20 TrueSpeech 6.3,5.3,4.8 or 4.1 frames. -* -* The default in the driver is currently set to 2 frames. -* -* The IXJCTL_REC_VOLUME and IXJCTL_PLAY_VOLUME commands both use a Q8 -* number as a parameter, 0x100 scales the signal by 1.0, 0x200 scales the -* signal by 2.0, 0x80 scales the signal by 0.5. No protection is given -* against over-scaling, if the multiplication factor times the input -* signal exceeds 16 bits, overflow distortion will occur. The default -* setting is 0x100 (1.0). -* -* The IXJCTL_REC_LEVEL returns the average signal level (not r.m.s.) on -* the most recently recorded frame as a 16 bit value. -******************************************************************************/ - -#define IXJCTL_REC_CODEC PHONE_REC_CODEC -#define IXJCTL_REC_START PHONE_REC_START -#define IXJCTL_REC_STOP PHONE_REC_STOP -#define IXJCTL_REC_DEPTH PHONE_REC_DEPTH -#define IXJCTL_FRAME PHONE_FRAME -#define IXJCTL_REC_VOLUME PHONE_REC_VOLUME -#define IXJCTL_REC_LEVEL PHONE_REC_LEVEL - -typedef enum { - f300_640 = 4, f300_500, f1100, f350, f400, f480, f440, f620, f20_50, - f133_200, f300, f300_420, f330, f300_425, f330_440, f340, f350_400, - f350_440, f350_450, f360, f380_420, f392, f400_425, f400_440, f400_450, - f420, f425, f425_450, f425_475, f435, f440_450, f440_480, f445, f450, - f452, f475, f480_620, f494, f500, f520, f523, f525, f540_660, f587, - f590, f600, f660, f700, f740, f750, f750_1450, f770, f800, f816, f850, - f857_1645, f900, f900_1300, f935_1215, f941_1477, f942, f950, f950_1400, - f975, f1000, f1020, f1050, f1100_1750, f1140, f1200, f1209, f1330, f1336, - lf1366, f1380, f1400, f1477, f1600, f1633_1638, f1800, f1860 -} IXJ_FILTER_FREQ; - -typedef struct { - unsigned int filter; - IXJ_FILTER_FREQ freq; - char enable; -} IXJ_FILTER; - -typedef struct { - char enable; - char en_filter; - unsigned int filter; - unsigned int on1; - unsigned int off1; - unsigned int on2; - unsigned int off2; - unsigned int on3; - unsigned int off3; -} IXJ_FILTER_CADENCE; - -#define IXJCTL_SET_FILTER _IOW ('q', 0xC7, IXJ_FILTER *) -#define IXJCTL_SET_FILTER_RAW _IOW ('q', 0xDD, IXJ_FILTER_RAW *) -#define IXJCTL_GET_FILTER_HIST _IOW ('q', 0xC8, int) -#define IXJCTL_FILTER_CADENCE _IOW ('q', 0xD6, IXJ_FILTER_CADENCE *) -#define IXJCTL_PLAY_CID _IO ('q', 0xD7) -/****************************************************************************** -* -* This IOCTL allows you to reassign values in the tone index table. The -* tone table has 32 entries (0 - 31), but the driver only allows entries -* 13 - 27 to be modified, entry 0 is reserved for silence and 1 - 12 are -* the standard DTMF digits and 28 - 31 are the DTMF tones for A, B, C & D. -* The positions used internally for Call Progress Tones are as follows: -* Dial Tone - 25 -* Ring Back - 26 -* Busy Signal - 27 -* -* The freq values are calculated as: -* freq = cos(2 * PI * frequency / 8000) -* -* The most commonly needed values are already calculated and listed in the -* enum IXJ_TONE_FREQ. Each tone index can have two frequencies with -* different gains, if you are only using a single frequency set the unused -* one to 0. -* -* The gain values range from 0 to 15 indicating +6dB to -24dB in 2dB -* increments. -* -******************************************************************************/ - -typedef enum { - hz20 = 0x7ffa, - hz50 = 0x7fe5, - hz133 = 0x7f4c, - hz200 = 0x7e6b, - hz261 = 0x7d50, /* .63 C1 */ - hz277 = 0x7cfa, /* .18 CS1 */ - hz293 = 0x7c9f, /* .66 D1 */ - hz300 = 0x7c75, - hz311 = 0x7c32, /* .13 DS1 */ - hz329 = 0x7bbf, /* .63 E1 */ - hz330 = 0x7bb8, - hz340 = 0x7b75, - hz349 = 0x7b37, /* .23 F1 */ - hz350 = 0x7b30, - hz360 = 0x7ae9, - hz369 = 0x7aa8, /* .99 FS1 */ - hz380 = 0x7a56, - hz392 = 0x79fa, /* .00 G1 */ - hz400 = 0x79bb, - hz415 = 0x7941, /* .30 GS1 */ - hz420 = 0x7918, - hz425 = 0x78ee, - hz435 = 0x7899, - hz440 = 0x786d, /* .00 A1 */ - hz445 = 0x7842, - hz450 = 0x7815, - hz452 = 0x7803, - hz466 = 0x7784, /* .16 AS1 */ - hz475 = 0x7731, - hz480 = 0x7701, - hz493 = 0x7685, /* .88 B1 */ - hz494 = 0x767b, - hz500 = 0x7640, - hz520 = 0x7578, - hz523 = 0x7559, /* .25 C2 */ - hz525 = 0x7544, - hz540 = 0x74a7, - hz554 = 0x7411, /* .37 CS2 */ - hz587 = 0x72a1, /* .33 D2 */ - hz590 = 0x727f, - hz600 = 0x720b, - hz620 = 0x711e, - hz622 = 0x7106, /* .25 DS2 */ - hz659 = 0x6f3b, /* .26 E2 */ - hz660 = 0x6f2e, - hz698 = 0x6d3d, /* .46 F2 */ - hz700 = 0x6d22, - hz739 = 0x6b09, /* .99 FS2 */ - hz740 = 0x6afa, - hz750 = 0x6a6c, - hz770 = 0x694b, - hz783 = 0x688b, /* .99 G2 */ - hz800 = 0x678d, - hz816 = 0x6698, - hz830 = 0x65bf, /* .61 GS2 */ - hz850 = 0x6484, - hz857 = 0x6414, - hz880 = 0x629f, /* .00 A2 */ - hz900 = 0x6154, - hz932 = 0x5f35, /* .33 AS2 */ - hz935 = 0x5f01, - hz941 = 0x5e9a, - hz942 = 0x5e88, - hz950 = 0x5dfd, - hz975 = 0x5c44, - hz1000 = 0x5a81, - hz1020 = 0x5912, - hz1050 = 0x56e2, - hz1100 = 0x5320, - hz1140 = 0x5007, - hz1200 = 0x4b3b, - hz1209 = 0x4a80, - hz1215 = 0x4a02, - hz1250 = 0x471c, - hz1300 = 0x42e0, - hz1330 = 0x4049, - hz1336 = 0x3fc4, - hz1366 = 0x3d22, - hz1380 = 0x3be4, - hz1400 = 0x3a1b, - hz1450 = 0x3596, - hz1477 = 0x331c, - hz1500 = 0x30fb, - hz1600 = 0x278d, - hz1633 = 0x2462, - hz1638 = 0x23e7, - hz1645 = 0x233a, - hz1750 = 0x18f8, - hz1800 = 0x1405, - hz1860 = 0xe0b, - hz2100 = 0xf5f6, - hz2130 = 0xf2f5, - hz2450 = 0xd3b3, - hz2750 = 0xb8e4 -} IXJ_FREQ; - -typedef enum { - C1 = hz261, - CS1 = hz277, - D1 = hz293, - DS1 = hz311, - E1 = hz329, - F1 = hz349, - FS1 = hz369, - G1 = hz392, - GS1 = hz415, - A1 = hz440, - AS1 = hz466, - B1 = hz493, - C2 = hz523, - CS2 = hz554, - D2 = hz587, - DS2 = hz622, - E2 = hz659, - F2 = hz698, - FS2 = hz739, - G2 = hz783, - GS2 = hz830, - A2 = hz880, - AS2 = hz932, -} IXJ_NOTE; - -typedef struct { - int tone_index; - int freq0; - int gain0; - int freq1; - int gain1; -} IXJ_TONE; - -#define IXJCTL_INIT_TONE _IOW ('q', 0xC9, IXJ_TONE *) - -/****************************************************************************** -* -* The IXJCTL_TONE_CADENCE ioctl defines tone sequences used for various -* Call Progress Tones (CPT). This is accomplished by setting up an array of -* IXJ_CADENCE_ELEMENT structures that sequentially define the states of -* the tone sequence. The tone_on_time and tone_off time are in -* 250 microsecond intervals. A pointer to this array is passed to the -* driver as the ce element of an IXJ_CADENCE structure. The elements_used -* must be set to the number of IXJ_CADENCE_ELEMENTS in the array. The -* termination variable defines what to do at the end of a cadence, the -* options are to play the cadence once and stop, to repeat the last -* element of the cadence indefinitely, or to repeat the entire cadence -* indefinitely. The ce variable is a pointer to the array of IXJ_TONE -* structures. If the freq0 variable is non-zero, the tone table contents -* for the tone_index are updated to the frequencies and gains defined. It -* should be noted that DTMF tones cannot be reassigned, so if DTMF tone -* table indexes are used in a cadence the frequency and gain variables will -* be ignored. -* -* If the array elements contain frequency parameters the driver will -* initialize the needed tone table elements and begin playing the tone, -* there is no preset limit on the number of elements in the cadence. If -* there is more than one frequency used in the cadence, sequential elements -* of different frequencies MUST use different tone table indexes. Only one -* cadence can be played at a time. It is possible to build complex -* cadences with multiple frequencies using 2 tone table indexes by -* alternating between them. -* -******************************************************************************/ - -typedef struct { - int index; - int tone_on_time; - int tone_off_time; - int freq0; - int gain0; - int freq1; - int gain1; -} IXJ_CADENCE_ELEMENT; - -typedef enum { - PLAY_ONCE, - REPEAT_LAST_ELEMENT, - REPEAT_ALL -} IXJ_CADENCE_TERM; - -typedef struct { - int elements_used; - IXJ_CADENCE_TERM termination; - IXJ_CADENCE_ELEMENT __user *ce; -} IXJ_CADENCE; - -#define IXJCTL_TONE_CADENCE _IOW ('q', 0xCA, IXJ_CADENCE *) -/****************************************************************************** -* -* This group of IOCTLs deal with the playback settings of the DSP -* -******************************************************************************/ - -#define IXJCTL_PLAY_CODEC PHONE_PLAY_CODEC -#define IXJCTL_PLAY_START PHONE_PLAY_START -#define IXJCTL_PLAY_STOP PHONE_PLAY_STOP -#define IXJCTL_PLAY_DEPTH PHONE_PLAY_DEPTH -#define IXJCTL_PLAY_VOLUME PHONE_PLAY_VOLUME -#define IXJCTL_PLAY_LEVEL PHONE_PLAY_LEVEL - -/****************************************************************************** -* -* This group of IOCTLs deal with the Acoustic Echo Cancellation settings -* of the DSP -* -* Issuing the IXJCTL_AEC_START command with a value of AEC_OFF has the -* same effect as IXJCTL_AEC_STOP. This is to simplify slider bar -* controls. IXJCTL_AEC_GET_LEVEL returns the current setting of the AEC. -******************************************************************************/ -#define IXJCTL_AEC_START _IOW ('q', 0xCB, int) -#define IXJCTL_AEC_STOP _IO ('q', 0xCC) -#define IXJCTL_AEC_GET_LEVEL _IO ('q', 0xCD) - -#define AEC_OFF 0 -#define AEC_LOW 1 -#define AEC_MED 2 -#define AEC_HIGH 3 -#define AEC_AUTO 4 -#define AEC_AGC 5 -/****************************************************************************** -* -* Call Progress Tones, DTMF, etc. -* IXJCTL_DTMF_OOB determines if DTMF signaling is sent as Out-Of-Band -* only. If you pass a 1, DTMF is suppressed from the audio stream. -* Tone on and off times are in 250 microsecond intervals so -* ioctl(ixj1, IXJCTL_SET_TONE_ON_TIME, 360); -* will set the tone on time of board ixj1 to 360 * 250us = 90ms -* the default values of tone on and off times is 840 or 210ms -******************************************************************************/ - -#define IXJCTL_DTMF_READY PHONE_DTMF_READY -#define IXJCTL_GET_DTMF PHONE_GET_DTMF -#define IXJCTL_GET_DTMF_ASCII PHONE_GET_DTMF_ASCII -#define IXJCTL_DTMF_OOB PHONE_DTMF_OOB -#define IXJCTL_EXCEPTION PHONE_EXCEPTION -#define IXJCTL_PLAY_TONE PHONE_PLAY_TONE -#define IXJCTL_SET_TONE_ON_TIME PHONE_SET_TONE_ON_TIME -#define IXJCTL_SET_TONE_OFF_TIME PHONE_SET_TONE_OFF_TIME -#define IXJCTL_GET_TONE_ON_TIME PHONE_GET_TONE_ON_TIME -#define IXJCTL_GET_TONE_OFF_TIME PHONE_GET_TONE_OFF_TIME -#define IXJCTL_GET_TONE_STATE PHONE_GET_TONE_STATE -#define IXJCTL_BUSY PHONE_BUSY -#define IXJCTL_RINGBACK PHONE_RINGBACK -#define IXJCTL_DIALTONE PHONE_DIALTONE -#define IXJCTL_CPT_STOP PHONE_CPT_STOP - -/****************************************************************************** -* LineJACK specific IOCTLs -* -* The lsb 4 bits of the LED argument represent the state of each of the 4 -* LED's on the LineJACK -******************************************************************************/ - -#define IXJCTL_SET_LED _IOW ('q', 0xCE, int) -#define IXJCTL_MIXER _IOW ('q', 0xCF, int) - -/****************************************************************************** -* -* The master volume controls use attenuation with 32 levels from 0 to -62dB -* with steps of 2dB each, the defines should be OR'ed together then sent -* as the parameter to the mixer command to change the mixer settings. -* -******************************************************************************/ -#define MIXER_MASTER_L 0x0000 -#define MIXER_MASTER_R 0x0100 -#define ATT00DB 0x00 -#define ATT02DB 0x01 -#define ATT04DB 0x02 -#define ATT06DB 0x03 -#define ATT08DB 0x04 -#define ATT10DB 0x05 -#define ATT12DB 0x06 -#define ATT14DB 0x07 -#define ATT16DB 0x08 -#define ATT18DB 0x09 -#define ATT20DB 0x0A -#define ATT22DB 0x0B -#define ATT24DB 0x0C -#define ATT26DB 0x0D -#define ATT28DB 0x0E -#define ATT30DB 0x0F -#define ATT32DB 0x10 -#define ATT34DB 0x11 -#define ATT36DB 0x12 -#define ATT38DB 0x13 -#define ATT40DB 0x14 -#define ATT42DB 0x15 -#define ATT44DB 0x16 -#define ATT46DB 0x17 -#define ATT48DB 0x18 -#define ATT50DB 0x19 -#define ATT52DB 0x1A -#define ATT54DB 0x1B -#define ATT56DB 0x1C -#define ATT58DB 0x1D -#define ATT60DB 0x1E -#define ATT62DB 0x1F -#define MASTER_MUTE 0x80 - -/****************************************************************************** -* -* The input volume controls use gain with 32 levels from +12dB to -50dB -* with steps of 2dB each, the defines should be OR'ed together then sent -* as the parameter to the mixer command to change the mixer settings. -* -******************************************************************************/ -#define MIXER_PORT_CD_L 0x0600 -#define MIXER_PORT_CD_R 0x0700 -#define MIXER_PORT_LINE_IN_L 0x0800 -#define MIXER_PORT_LINE_IN_R 0x0900 -#define MIXER_PORT_POTS_REC 0x0C00 -#define MIXER_PORT_MIC 0x0E00 - -#define GAIN12DB 0x00 -#define GAIN10DB 0x01 -#define GAIN08DB 0x02 -#define GAIN06DB 0x03 -#define GAIN04DB 0x04 -#define GAIN02DB 0x05 -#define GAIN00DB 0x06 -#define GAIN_02DB 0x07 -#define GAIN_04DB 0x08 -#define GAIN_06DB 0x09 -#define GAIN_08DB 0x0A -#define GAIN_10DB 0x0B -#define GAIN_12DB 0x0C -#define GAIN_14DB 0x0D -#define GAIN_16DB 0x0E -#define GAIN_18DB 0x0F -#define GAIN_20DB 0x10 -#define GAIN_22DB 0x11 -#define GAIN_24DB 0x12 -#define GAIN_26DB 0x13 -#define GAIN_28DB 0x14 -#define GAIN_30DB 0x15 -#define GAIN_32DB 0x16 -#define GAIN_34DB 0x17 -#define GAIN_36DB 0x18 -#define GAIN_38DB 0x19 -#define GAIN_40DB 0x1A -#define GAIN_42DB 0x1B -#define GAIN_44DB 0x1C -#define GAIN_46DB 0x1D -#define GAIN_48DB 0x1E -#define GAIN_50DB 0x1F -#define INPUT_MUTE 0x80 - -/****************************************************************************** -* -* The POTS volume control use attenuation with 8 levels from 0dB to -28dB -* with steps of 4dB each, the defines should be OR'ed together then sent -* as the parameter to the mixer command to change the mixer settings. -* -******************************************************************************/ -#define MIXER_PORT_POTS_PLAY 0x0F00 - -#define POTS_ATT_00DB 0x00 -#define POTS_ATT_04DB 0x01 -#define POTS_ATT_08DB 0x02 -#define POTS_ATT_12DB 0x03 -#define POTS_ATT_16DB 0x04 -#define POTS_ATT_20DB 0x05 -#define POTS_ATT_24DB 0x06 -#define POTS_ATT_28DB 0x07 -#define POTS_MUTE 0x80 - -/****************************************************************************** -* -* The DAA controls the interface to the PSTN port. The driver loads the -* US coefficients by default, so if you live in a different country you -* need to load the set for your countries phone system. -* -******************************************************************************/ -#define IXJCTL_DAA_COEFF_SET _IOW ('q', 0xD0, int) - -#define DAA_US 1 /*PITA 8kHz */ -#define DAA_UK 2 /*ISAR34 8kHz */ -#define DAA_FRANCE 3 /* */ -#define DAA_GERMANY 4 -#define DAA_AUSTRALIA 5 -#define DAA_JAPAN 6 - -/****************************************************************************** -* -* Use IXJCTL_PORT to set or query the port the card is set to. If the -* argument is set to PORT_QUERY, the return value of the ioctl will -* indicate which port is currently in use, otherwise it will change the -* port. -* -******************************************************************************/ -#define IXJCTL_PORT _IOW ('q', 0xD1, int) - -#define PORT_QUERY 0 -#define PORT_POTS 1 -#define PORT_PSTN 2 -#define PORT_SPEAKER 3 -#define PORT_HANDSET 4 - -#define IXJCTL_PSTN_SET_STATE PHONE_PSTN_SET_STATE -#define IXJCTL_PSTN_GET_STATE PHONE_PSTN_GET_STATE - -#define PSTN_ON_HOOK 0 -#define PSTN_RINGING 1 -#define PSTN_OFF_HOOK 2 -#define PSTN_PULSE_DIAL 3 - -/****************************************************************************** -* -* The DAA Analog GAIN sets 2 parameters at one time, the receive gain (AGRR), -* and the transmit gain (AGX). OR together the components and pass them -* as the parameter to IXJCTL_DAA_AGAIN. The default setting is both at 0dB. -* -******************************************************************************/ -#define IXJCTL_DAA_AGAIN _IOW ('q', 0xD2, int) - -#define AGRR00DB 0x00 /* Analog gain in receive direction 0dB */ -#define AGRR3_5DB 0x10 /* Analog gain in receive direction 3.5dB */ -#define AGRR06DB 0x30 /* Analog gain in receive direction 6dB */ - -#define AGX00DB 0x00 /* Analog gain in transmit direction 0dB */ -#define AGX_6DB 0x04 /* Analog gain in transmit direction -6dB */ -#define AGX3_5DB 0x08 /* Analog gain in transmit direction 3.5dB */ -#define AGX_2_5B 0x0C /* Analog gain in transmit direction -2.5dB */ - -#define IXJCTL_PSTN_LINETEST _IO ('q', 0xD3) - -#define IXJCTL_CID _IOR ('q', 0xD4, PHONE_CID *) -#define IXJCTL_VMWI _IOR ('q', 0xD8, int) -#define IXJCTL_CIDCW _IOW ('q', 0xD9, PHONE_CID *) -/****************************************************************************** -* -* The wink duration is tunable with this ioctl. The default wink duration -* is 320ms. You do not need to use this ioctl if you do not require a -* different wink duration. -* -******************************************************************************/ -#define IXJCTL_WINK_DURATION PHONE_WINK_DURATION - -/****************************************************************************** -* -* This ioctl will connect the POTS port to the PSTN port on the LineJACK -* In order for this to work properly the port selection should be set to -* the PSTN port with IXJCTL_PORT prior to calling this ioctl. This will -* enable conference calls between PSTN callers and network callers. -* Passing a 1 to this ioctl enables the POTS<->PSTN connection while -* passing a 0 turns it back off. -* -******************************************************************************/ -#define IXJCTL_POTS_PSTN _IOW ('q', 0xD5, int) - -/****************************************************************************** -* -* IOCTLs added by request. -* -* IXJCTL_HZ sets the value your Linux kernel uses for HZ as defined in -* /usr/include/asm/param.h, this determines the fundamental -* frequency of the clock ticks on your Linux system. The kernel -* must be rebuilt if you change this value, also all modules you -* use (except this one) must be recompiled. The default value -* is 100, and you only need to use this IOCTL if you use some -* other value. -* -* -* IXJCTL_RATE sets the number of times per second that the driver polls -* the DSP. This value cannot be larger than HZ. By -* increasing both of these values, you may be able to reduce -* latency because the max hang time that can exist between the -* driver and the DSP will be reduced. -* -******************************************************************************/ - -#define IXJCTL_HZ _IOW ('q', 0xE0, int) -#define IXJCTL_RATE _IOW ('q', 0xE1, int) -#define IXJCTL_FRAMES_READ _IOR ('q', 0xE2, unsigned long) -#define IXJCTL_FRAMES_WRITTEN _IOR ('q', 0xE3, unsigned long) -#define IXJCTL_READ_WAIT _IOR ('q', 0xE4, unsigned long) -#define IXJCTL_WRITE_WAIT _IOR ('q', 0xE5, unsigned long) -#define IXJCTL_DRYBUFFER_READ _IOR ('q', 0xE6, unsigned long) -#define IXJCTL_DRYBUFFER_CLEAR _IO ('q', 0xE7) -#define IXJCTL_DTMF_PRESCALE _IOW ('q', 0xE8, int) - -/****************************************************************************** -* -* This ioctl allows the user application to control what events the driver -* will send signals for, and what signals it will send for which event. -* By default, if signaling is enabled, all events will send SIGIO when -* they occur. To disable signals for an event set the signal to 0. -* -******************************************************************************/ -typedef enum { - SIG_DTMF_READY, - SIG_HOOKSTATE, - SIG_FLASH, - SIG_PSTN_RING, - SIG_CALLER_ID, - SIG_PSTN_WINK, - SIG_F0, SIG_F1, SIG_F2, SIG_F3, - SIG_FC0, SIG_FC1, SIG_FC2, SIG_FC3, - SIG_READ_READY = 33, - SIG_WRITE_READY = 34 -} IXJ_SIGEVENT; - -typedef struct { - unsigned int event; - int signal; -} IXJ_SIGDEF; - -#define IXJCTL_SIGCTL _IOW ('q', 0xE9, IXJ_SIGDEF *) - -/****************************************************************************** -* -* These ioctls allow the user application to change the gain in the -* Smart Cable of the Internet Phone Card. Sending -1 as a value will cause -* return value to be the current setting. Valid values to set are 0x00 - 0x1F -* -* 11111 = +12 dB -* 10111 = 0 dB -* 00000 = -34.5 dB -* -* IXJCTL_SC_RXG sets the Receive gain -* IXJCTL_SC_TXG sets the Transmit gain -* -******************************************************************************/ -#define IXJCTL_SC_RXG _IOW ('q', 0xEA, int) -#define IXJCTL_SC_TXG _IOW ('q', 0xEB, int) - -/****************************************************************************** -* -* The intercom IOCTL's short the output from one card to the input of the -* other and vice versa (actually done in the DSP read function). It is only -* necessary to execute the IOCTL on one card, but it is necessary to have -* both devices open to be able to detect hook switch changes. The record -* codec and rate of each card must match the playback codec and rate of -* the other card for this to work properly. -* -******************************************************************************/ - -#define IXJCTL_INTERCOM_START _IOW ('q', 0xFD, int) -#define IXJCTL_INTERCOM_STOP _IOW ('q', 0xFE, int) - -/****************************************************************************** - * - * new structure for accessing raw filter information - * - ******************************************************************************/ - -typedef struct { - unsigned int filter; - char enable; - unsigned int coeff[19]; -} IXJ_FILTER_RAW; - -#endif |