diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/as3722.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/axp20x.h | 59 | ||||
| -rw-r--r-- | include/linux/mfd/core.h | 8 | ||||
| -rw-r--r-- | include/linux/mfd/cros_ec.h | 6 | ||||
| -rw-r--r-- | include/linux/mfd/hi655x-pmic.h | 55 | ||||
| -rw-r--r-- | include/linux/mfd/max77620.h | 346 | ||||
| -rw-r--r-- | include/linux/mfd/samsung/core.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/samsung/s2mps11.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/syscon.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/syscon/exynos5-pmu.h | 3 | ||||
| -rw-r--r-- | include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/tmio.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/twl6040.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/wm8400-private.h | 1 |
14 files changed, 490 insertions, 7 deletions
diff --git a/include/linux/mfd/as3722.h b/include/linux/mfd/as3722.h index 8d43e9f2a842..51e6f9414575 100644 --- a/include/linux/mfd/as3722.h +++ b/include/linux/mfd/as3722.h @@ -196,6 +196,7 @@ #define AS3722_LDO3_VSEL_MIN 0x01 #define AS3722_LDO3_VSEL_MAX 0x2D #define AS3722_LDO3_NUM_VOLT 0x2D +#define AS3722_LDO6_VSEL_BYPASS 0x3F #define AS3722_LDO_VSEL_MASK 0x7F #define AS3722_LDO_VSEL_MIN 0x01 #define AS3722_LDO_VSEL_MAX 0x7F diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index d82e7d51372b..0be4982f08fe 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -20,6 +20,7 @@ enum { AXP221_ID, AXP223_ID, AXP288_ID, + AXP809_ID, NR_AXP20X_VARIANTS, }; @@ -264,6 +265,29 @@ enum { AXP22X_REG_ID_MAX, }; +enum { + AXP809_DCDC1 = 0, + AXP809_DCDC2, + AXP809_DCDC3, + AXP809_DCDC4, + AXP809_DCDC5, + AXP809_DC1SW, + AXP809_DC5LDO, + AXP809_ALDO1, + AXP809_ALDO2, + AXP809_ALDO3, + AXP809_ELDO1, + AXP809_ELDO2, + AXP809_ELDO3, + AXP809_DLDO1, + AXP809_DLDO2, + AXP809_RTC_LDO, + AXP809_LDO_IO0, + AXP809_LDO_IO1, + AXP809_SW, + AXP809_REG_ID_MAX, +}; + /* IRQs */ enum { AXP152_IRQ_LDO0IN_CONNECT = 1, @@ -390,6 +414,41 @@ enum axp288_irqs { AXP288_IRQ_BC_USB_CHNG, }; +enum axp809_irqs { + AXP809_IRQ_ACIN_OVER_V = 1, + AXP809_IRQ_ACIN_PLUGIN, + AXP809_IRQ_ACIN_REMOVAL, + AXP809_IRQ_VBUS_OVER_V, + AXP809_IRQ_VBUS_PLUGIN, + AXP809_IRQ_VBUS_REMOVAL, + AXP809_IRQ_VBUS_V_LOW, + AXP809_IRQ_BATT_PLUGIN, + AXP809_IRQ_BATT_REMOVAL, + AXP809_IRQ_BATT_ENT_ACT_MODE, + AXP809_IRQ_BATT_EXIT_ACT_MODE, + AXP809_IRQ_CHARG, + AXP809_IRQ_CHARG_DONE, + AXP809_IRQ_BATT_CHG_TEMP_HIGH, + AXP809_IRQ_BATT_CHG_TEMP_HIGH_END, + AXP809_IRQ_BATT_CHG_TEMP_LOW, + AXP809_IRQ_BATT_CHG_TEMP_LOW_END, + AXP809_IRQ_BATT_ACT_TEMP_HIGH, + AXP809_IRQ_BATT_ACT_TEMP_HIGH_END, + AXP809_IRQ_BATT_ACT_TEMP_LOW, + AXP809_IRQ_BATT_ACT_TEMP_LOW_END, + AXP809_IRQ_DIE_TEMP_HIGH, + AXP809_IRQ_LOW_PWR_LVL1, + AXP809_IRQ_LOW_PWR_LVL2, + AXP809_IRQ_TIMER, + AXP809_IRQ_PEK_RIS_EDGE, + AXP809_IRQ_PEK_FAL_EDGE, + AXP809_IRQ_PEK_SHORT, + AXP809_IRQ_PEK_LONG, + AXP809_IRQ_PEK_OVER_OFF, + AXP809_IRQ_GPIO1_INPUT, + AXP809_IRQ_GPIO0_INPUT, +}; + #define AXP288_TS_ADC_H 0x58 #define AXP288_TS_ADC_L 0x59 #define AXP288_GP_ADC_H 0x5a diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index bc6f7e00fb3d..99c0395fe1f9 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -17,7 +17,7 @@ #include <linux/platform_device.h> struct irq_domain; -struct property_set; +struct property_entry; /* Matches ACPI PNP id, either _HID or _CID, or ACPI _ADR */ struct mfd_cell_acpi_match { @@ -47,7 +47,7 @@ struct mfd_cell { size_t pdata_size; /* device properties passed to the sub devices drivers */ - const struct property_set *pset; + struct property_entry *properties; /* * Device Tree compatible string @@ -131,4 +131,8 @@ static inline int mfd_add_hotplug_devices(struct device *parent, extern void mfd_remove_devices(struct device *parent); +extern int devm_mfd_add_devices(struct device *dev, int id, + const struct mfd_cell *cells, int n_devs, + struct resource *mem_base, + int irq_base, struct irq_domain *irq_domain); #endif diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index a677c2bd485c..64184d27e3cd 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -50,9 +50,11 @@ enum { EC_MSG_TX_TRAILER_BYTES, EC_MSG_RX_PROTO_BYTES = 3, - /* Max length of messages */ - EC_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE + + /* Max length of messages for proto 2*/ + EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE + EC_MSG_TX_PROTO_BYTES, + + EC_MAX_MSG_BYTES = 64 * 1024, }; /* diff --git a/include/linux/mfd/hi655x-pmic.h b/include/linux/mfd/hi655x-pmic.h new file mode 100644 index 000000000000..dbbe9a644622 --- /dev/null +++ b/include/linux/mfd/hi655x-pmic.h @@ -0,0 +1,55 @@ +/* + * Device driver for regulators in hi655x IC + * + * Copyright (c) 2016 Hisilicon. + * + * Authors: + * Chen Feng <puck.chen@hisilicon.com> + * Fei Wang <w.f@huawei.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __HI655X_PMIC_H +#define __HI655X_PMIC_H + +/* Hi655x registers are mapped to memory bus in 4 bytes stride */ +#define HI655X_STRIDE 4 +#define HI655X_BUS_ADDR(x) ((x) << 2) + +#define HI655X_BITS 8 + +#define HI655X_NR_IRQ 32 + +#define HI655X_IRQ_STAT_BASE (0x003 << 2) +#define HI655X_IRQ_MASK_BASE (0x007 << 2) +#define HI655X_ANA_IRQM_BASE (0x1b5 << 2) +#define HI655X_IRQ_ARRAY 4 +#define HI655X_IRQ_MASK 0xFF +#define HI655X_IRQ_CLR 0xFF +#define HI655X_VER_REG 0x00 + +#define PMU_VER_START 0x10 +#define PMU_VER_END 0x38 + +#define RESERVE_INT BIT(7) +#define PWRON_D20R_INT BIT(6) +#define PWRON_D20F_INT BIT(5) +#define PWRON_D4SR_INT BIT(4) +#define VSYS_6P0_D200UR_INT BIT(3) +#define VSYS_UV_D3R_INT BIT(2) +#define VSYS_2P5_R_INT BIT(1) +#define OTMP_D1R_INT BIT(0) + +struct hi655x_pmic { + struct resource *res; + struct device *dev; + struct regmap *regmap; + int gpio; + unsigned int ver; + struct regmap_irq_chip_data *irq_data; +}; + +#endif diff --git a/include/linux/mfd/max77620.h b/include/linux/mfd/max77620.h new file mode 100644 index 000000000000..3ca0af07fc78 --- /dev/null +++ b/include/linux/mfd/max77620.h @@ -0,0 +1,346 @@ +/* + * Defining registers address and its bit definitions of MAX77620 and MAX20024 + * + * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef _MFD_MAX77620_H_ +#define _MFD_MAX77620_H_ + +#include <linux/types.h> + +/* GLOBAL, PMIC, GPIO, FPS, ONOFFC, CID Registers */ +#define MAX77620_REG_CNFGGLBL1 0x00 +#define MAX77620_REG_CNFGGLBL2 0x01 +#define MAX77620_REG_CNFGGLBL3 0x02 +#define MAX77620_REG_CNFG1_32K 0x03 +#define MAX77620_REG_CNFGBBC 0x04 +#define MAX77620_REG_IRQTOP 0x05 +#define MAX77620_REG_INTLBT 0x06 +#define MAX77620_REG_IRQSD 0x07 +#define MAX77620_REG_IRQ_LVL2_L0_7 0x08 +#define MAX77620_REG_IRQ_LVL2_L8 0x09 +#define MAX77620_REG_IRQ_LVL2_GPIO 0x0A +#define MAX77620_REG_ONOFFIRQ 0x0B +#define MAX77620_REG_NVERC 0x0C +#define MAX77620_REG_IRQTOPM 0x0D +#define MAX77620_REG_INTENLBT 0x0E +#define MAX77620_REG_IRQMASKSD 0x0F +#define MAX77620_REG_IRQ_MSK_L0_7 0x10 +#define MAX77620_REG_IRQ_MSK_L8 0x11 +#define MAX77620_REG_ONOFFIRQM 0x12 +#define MAX77620_REG_STATLBT 0x13 +#define MAX77620_REG_STATSD 0x14 +#define MAX77620_REG_ONOFFSTAT 0x15 + +/* SD and LDO Registers */ +#define MAX77620_REG_SD0 0x16 +#define MAX77620_REG_SD1 0x17 +#define MAX77620_REG_SD2 0x18 +#define MAX77620_REG_SD3 0x19 +#define MAX77620_REG_SD4 0x1A +#define MAX77620_REG_DVSSD0 0x1B +#define MAX77620_REG_DVSSD1 0x1C +#define MAX77620_REG_SD0_CFG 0x1D +#define MAX77620_REG_SD1_CFG 0x1E +#define MAX77620_REG_SD2_CFG 0x1F +#define MAX77620_REG_SD3_CFG 0x20 +#define MAX77620_REG_SD4_CFG 0x21 +#define MAX77620_REG_SD_CFG2 0x22 +#define MAX77620_REG_LDO0_CFG 0x23 +#define MAX77620_REG_LDO0_CFG2 0x24 +#define MAX77620_REG_LDO1_CFG 0x25 +#define MAX77620_REG_LDO1_CFG2 0x26 +#define MAX77620_REG_LDO2_CFG 0x27 +#define MAX77620_REG_LDO2_CFG2 0x28 +#define MAX77620_REG_LDO3_CFG 0x29 +#define MAX77620_REG_LDO3_CFG2 0x2A +#define MAX77620_REG_LDO4_CFG 0x2B +#define MAX77620_REG_LDO4_CFG2 0x2C +#define MAX77620_REG_LDO5_CFG 0x2D +#define MAX77620_REG_LDO5_CFG2 0x2E +#define MAX77620_REG_LDO6_CFG 0x2F +#define MAX77620_REG_LDO6_CFG2 0x30 +#define MAX77620_REG_LDO7_CFG 0x31 +#define MAX77620_REG_LDO7_CFG2 0x32 +#define MAX77620_REG_LDO8_CFG 0x33 +#define MAX77620_REG_LDO8_CFG2 0x34 +#define MAX77620_REG_LDO_CFG3 0x35 + +#define MAX77620_LDO_SLEW_RATE_MASK 0x1 + +/* LDO Configuration 3 */ +#define MAX77620_TRACK4_MASK BIT(5) +#define MAX77620_TRACK4_SHIFT 5 + +/* Voltage */ +#define MAX77620_SDX_VOLT_MASK 0xFF +#define MAX77620_SD0_VOLT_MASK 0x3F +#define MAX77620_SD1_VOLT_MASK 0x7F +#define MAX77620_LDO_VOLT_MASK 0x3F + +#define MAX77620_REG_GPIO0 0x36 +#define MAX77620_REG_GPIO1 0x37 +#define MAX77620_REG_GPIO2 0x38 +#define MAX77620_REG_GPIO3 0x39 +#define MAX77620_REG_GPIO4 0x3A +#define MAX77620_REG_GPIO5 0x3B +#define MAX77620_REG_GPIO6 0x3C +#define MAX77620_REG_GPIO7 0x3D +#define MAX77620_REG_PUE_GPIO 0x3E +#define MAX77620_REG_PDE_GPIO 0x3F +#define MAX77620_REG_AME_GPIO 0x40 +#define MAX77620_REG_ONOFFCNFG1 0x41 +#define MAX77620_REG_ONOFFCNFG2 0x42 + +/* FPS Registers */ +#define MAX77620_REG_FPS_CFG0 0x43 +#define MAX77620_REG_FPS_CFG1 0x44 +#define MAX77620_REG_FPS_CFG2 0x45 +#define MAX77620_REG_FPS_LDO0 0x46 +#define MAX77620_REG_FPS_LDO1 0x47 +#define MAX77620_REG_FPS_LDO2 0x48 +#define MAX77620_REG_FPS_LDO3 0x49 +#define MAX77620_REG_FPS_LDO4 0x4A +#define MAX77620_REG_FPS_LDO5 0x4B +#define MAX77620_REG_FPS_LDO6 0x4C +#define MAX77620_REG_FPS_LDO7 0x4D +#define MAX77620_REG_FPS_LDO8 0x4E +#define MAX77620_REG_FPS_SD0 0x4F +#define MAX77620_REG_FPS_SD1 0x50 +#define MAX77620_REG_FPS_SD2 0x51 +#define MAX77620_REG_FPS_SD3 0x52 +#define MAX77620_REG_FPS_SD4 0x53 +#define MAX77620_REG_FPS_NONE 0 + +#define MAX77620_FPS_SRC_MASK 0xC0 +#define MAX77620_FPS_SRC_SHIFT 6 +#define MAX77620_FPS_PU_PERIOD_MASK 0x38 +#define MAX77620_FPS_PU_PERIOD_SHIFT 3 +#define MAX77620_FPS_PD_PERIOD_MASK 0x07 +#define MAX77620_FPS_PD_PERIOD_SHIFT 0 +#define MAX77620_FPS_TIME_PERIOD_MASK 0x38 +#define MAX77620_FPS_TIME_PERIOD_SHIFT 3 +#define MAX77620_FPS_EN_SRC_MASK 0x06 +#define MAX77620_FPS_EN_SRC_SHIFT 1 +#define MAX77620_FPS_ENFPS_SW_MASK 0x01 +#define MAX77620_FPS_ENFPS_SW 0x01 + +/* Minimum and maximum FPS period time (in microseconds) are + * different for MAX77620 and Max20024. + */ +#define MAX77620_FPS_PERIOD_MIN_US 40 +#define MAX20024_FPS_PERIOD_MIN_US 20 + +#define MAX77620_FPS_PERIOD_MAX_US 2560 +#define MAX20024_FPS_PERIOD_MAX_US 5120 + +#define MAX77620_REG_FPS_GPIO1 0x54 +#define MAX77620_REG_FPS_GPIO2 0x55 +#define MAX77620_REG_FPS_GPIO3 0x56 +#define MAX77620_REG_FPS_RSO 0x57 +#define MAX77620_REG_CID0 0x58 +#define MAX77620_REG_CID1 0x59 +#define MAX77620_REG_CID2 0x5A +#define MAX77620_REG_CID3 0x5B +#define MAX77620_REG_CID4 0x5C +#define MAX77620_REG_CID5 0x5D + +#define MAX77620_REG_DVSSD4 0x5E +#define MAX20024_REG_MAX_ADD 0x70 + +#define MAX77620_CID_DIDM_MASK 0xF0 +#define MAX77620_CID_DIDM_SHIFT 4 + +/* CNCG2SD */ +#define MAX77620_SD_CNF2_ROVS_EN_SD1 BIT(1) +#define MAX77620_SD_CNF2_ROVS_EN_SD0 BIT(2) + +/* Device Identification Metal */ +#define MAX77620_CID5_DIDM(n) (((n) >> 4) & 0xF) +/* Device Indentification OTP */ +#define MAX77620_CID5_DIDO(n) ((n) & 0xF) + +/* SD CNFG1 */ +#define MAX77620_SD_SR_MASK 0xC0 +#define MAX77620_SD_SR_SHIFT 6 +#define MAX77620_SD_POWER_MODE_MASK 0x30 +#define MAX77620_SD_POWER_MODE_SHIFT 4 +#define MAX77620_SD_CFG1_ADE_MASK BIT(3) +#define MAX77620_SD_CFG1_ADE_DISABLE 0 +#define MAX77620_SD_CFG1_ADE_ENABLE BIT(3) +#define MAX77620_SD_FPWM_MASK 0x04 +#define MAX77620_SD_FPWM_SHIFT 2 +#define MAX77620_SD_FSRADE_MASK 0x01 +#define MAX77620_SD_FSRADE_SHIFT 0 +#define MAX77620_SD_CFG1_FPWM_SD_MASK BIT(2) +#define MAX77620_SD_CFG1_FPWM_SD_SKIP 0 +#define MAX77620_SD_CFG1_FPWM_SD_FPWM BIT(2) +#define MAX77620_SD_CFG1_FSRADE_SD_MASK BIT(0) +#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE 0 +#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE BIT(0) + +/* LDO_CNFG2 */ +#define MAX77620_LDO_POWER_MODE_MASK 0xC0 +#define MAX77620_LDO_POWER_MODE_SHIFT 6 +#define MAX77620_LDO_CFG2_ADE_MASK BIT(1) +#define MAX77620_LDO_CFG2_ADE_DISABLE 0 +#define MAX77620_LDO_CFG2_ADE_ENABLE BIT(1) +#define MAX77620_LDO_CFG2_SS_MASK BIT(0) +#define MAX77620_LDO_CFG2_SS_FAST BIT(0) +#define MAX77620_LDO_CFG2_SS_SLOW 0 + +#define MAX77620_IRQ_TOP_GLBL_MASK BIT(7) +#define MAX77620_IRQ_TOP_SD_MASK BIT(6) +#define MAX77620_IRQ_TOP_LDO_MASK BIT(5) +#define MAX77620_IRQ_TOP_GPIO_MASK BIT(4) +#define MAX77620_IRQ_TOP_RTC_MASK BIT(3) +#define MAX77620_IRQ_TOP_32K_MASK BIT(2) +#define MAX77620_IRQ_TOP_ONOFF_MASK BIT(1) + +#define MAX77620_IRQ_LBM_MASK BIT(3) +#define MAX77620_IRQ_TJALRM1_MASK BIT(2) +#define MAX77620_IRQ_TJALRM2_MASK BIT(1) + +#define MAX77620_PWR_I2C_ADDR 0x3c +#define MAX77620_RTC_I2C_ADDR 0x68 + +#define MAX77620_CNFG_GPIO_DRV_MASK BIT(0) +#define MAX77620_CNFG_GPIO_DRV_PUSHPULL BIT(0) +#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN 0 +#define MAX77620_CNFG_GPIO_DIR_MASK BIT(1) +#define MAX77620_CNFG_GPIO_DIR_INPUT BIT(1) +#define MAX77620_CNFG_GPIO_DIR_OUTPUT 0 +#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK BIT(2) +#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK BIT(3) +#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH BIT(3) +#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW 0 +#define MAX77620_CNFG_GPIO_INT_MASK (0x3 << 4) +#define MAX77620_CNFG_GPIO_INT_FALLING BIT(4) +#define MAX77620_CNFG_GPIO_INT_RISING BIT(5) +#define MAX77620_CNFG_GPIO_DBNC_MASK (0x3 << 6) +#define MAX77620_CNFG_GPIO_DBNC_None (0x0 << 6) +#define MAX77620_CNFG_GPIO_DBNC_8ms (0x1 << 6) +#define MAX77620_CNFG_GPIO_DBNC_16ms (0x2 << 6) +#define MAX77620_CNFG_GPIO_DBNC_32ms (0x3 << 6) + +#define MAX77620_IRQ_LVL2_GPIO_EDGE0 BIT(0) +#define MAX77620_IRQ_LVL2_GPIO_EDGE1 BIT(1) +#define MAX77620_IRQ_LVL2_GPIO_EDGE2 BIT(2) +#define MAX77620_IRQ_LVL2_GPIO_EDGE3 BIT(3) +#define MAX77620_IRQ_LVL2_GPIO_EDGE4 BIT(4) +#define MAX77620_IRQ_LVL2_GPIO_EDGE5 BIT(5) +#define MAX77620_IRQ_LVL2_GPIO_EDGE6 BIT(6) +#define MAX77620_IRQ_LVL2_GPIO_EDGE7 BIT(7) + +#define MAX77620_CNFG1_32K_OUT0_EN BIT(2) + +#define MAX77620_ONOFFCNFG1_SFT_RST BIT(7) +#define MAX77620_ONOFFCNFG1_MRT_MASK 0x38 +#define MAX77620_ONOFFCNFG1_MRT_SHIFT 0x3 +#define MAX77620_ONOFFCNFG1_SLPEN BIT(2) +#define MAX77620_ONOFFCNFG1_PWR_OFF BIT(1) +#define MAX20024_ONOFFCNFG1_CLRSE 0x18 + +#define MAX77620_ONOFFCNFG2_SFT_RST_WK BIT(7) +#define MAX77620_ONOFFCNFG2_WD_RST_WK BIT(6) +#define MAX77620_ONOFFCNFG2_SLP_LPM_MSK BIT(5) +#define MAX77620_ONOFFCNFG2_WK_ALARM1 BIT(2) +#define MAX77620_ONOFFCNFG2_WK_EN0 BIT(0) + +#define MAX77620_GLBLM_MASK BIT(0) + +#define MAX77620_WDTC_MASK 0x3 +#define MAX77620_WDTOFFC BIT(4) +#define MAX77620_WDTSLPC BIT(3) +#define MAX77620_WDTEN BIT(2) + +#define MAX77620_TWD_MASK 0x3 +#define MAX77620_TWD_2s 0x0 +#define MAX77620_TWD_16s 0x1 +#define MAX77620_TWD_64s 0x2 +#define MAX77620_TWD_128s 0x3 + +#define MAX77620_CNFGGLBL1_LBDAC_EN BIT(7) +#define MAX77620_CNFGGLBL1_MPPLD BIT(6) +#define MAX77620_CNFGGLBL1_LBHYST (BIT(5) | BIT(4)) +#define MAX77620_CNFGGLBL1_LBDAC 0x0E +#define MAX77620_CNFGGLBL1_LBRSTEN BIT(0) + +/* CNFG BBC registers */ +#define MAX77620_CNFGBBC_ENABLE BIT(0) +#define MAX77620_CNFGBBC_CURRENT_MASK 0x06 +#define MAX77620_CNFGBBC_CURRENT_SHIFT 1 +#define MAX77620_CNFGBBC_VOLTAGE_MASK 0x18 +#define MAX77620_CNFGBBC_VOLTAGE_SHIFT 3 +#define MAX77620_CNFGBBC_LOW_CURRENT_DISABLE BIT(5) +#define MAX77620_CNFGBBC_RESISTOR_MASK 0xC0 +#define MAX77620_CNFGBBC_RESISTOR_SHIFT 6 + +#define MAX77620_FPS_COUNT 3 + +/* Interrupts */ +enum { + MAX77620_IRQ_TOP_GLBL, /* Low-Battery */ + MAX77620_IRQ_TOP_SD, /* SD power fail */ + MAX77620_IRQ_TOP_LDO, /* LDO power fail */ + MAX77620_IRQ_TOP_GPIO, /* TOP GPIO internal int to MAX77620 */ + MAX77620_IRQ_TOP_RTC, /* RTC */ + MAX77620_IRQ_TOP_32K, /* 32kHz oscillator */ + MAX77620_IRQ_TOP_ONOFF, /* ON/OFF oscillator */ + MAX77620_IRQ_LBT_MBATLOW, /* Thermal alarm status, > 120C */ + MAX77620_IRQ_LBT_TJALRM1, /* Thermal alarm status, > 120C */ + MAX77620_IRQ_LBT_TJALRM2, /* Thermal alarm status, > 140C */ +}; + +/* GPIOs */ +enum { + MAX77620_GPIO0, + MAX77620_GPIO1, + MAX77620_GPIO2, + MAX77620_GPIO3, + MAX77620_GPIO4, + MAX77620_GPIO5, + MAX77620_GPIO6, + MAX77620_GPIO7, + MAX77620_GPIO_NR, +}; + +/* FPS Source */ +enum max77620_fps_src { + MAX77620_FPS_SRC_0, + MAX77620_FPS_SRC_1, + MAX77620_FPS_SRC_2, + MAX77620_FPS_SRC_NONE, + MAX77620_FPS_SRC_DEF, +}; + +enum max77620_chip_id { + MAX77620, + MAX20024, +}; + +struct max77620_chip { + struct device *dev; + struct regmap *rmap; + + int chip_irq; + int irq_base; + + /* chip id */ + enum max77620_chip_id chip_id; + + bool sleep_enable; + bool enable_global_lpm; + int shutdown_fps_period[MAX77620_FPS_COUNT]; + int suspend_fps_period[MAX77620_FPS_COUNT]; + + struct regmap_irq_chip_data *top_irq_data; + struct regmap_irq_chip_data *gpio_irq_data; +}; + +#endif /* _MFD_MAX77620_H_ */ diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 6bc4bcd488ac..5a23dd4df432 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -30,6 +30,9 @@ #define MIN_600_MV 600000 #define MIN_500_MV 500000 +/* Ramp delay in uV/us */ +#define RAMP_DELAY_12_MVUS 12000 + /* Macros to represent steps for LDO/BUCK */ #define STEP_50_MV 50000 #define STEP_25_MV 25000 diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h index b288965e8101..2c14eeca46f0 100644 --- a/include/linux/mfd/samsung/s2mps11.h +++ b/include/linux/mfd/samsung/s2mps11.h @@ -173,10 +173,12 @@ enum s2mps11_regulators { #define S2MPS11_LDO_VSEL_MASK 0x3F #define S2MPS11_BUCK_VSEL_MASK 0xFF +#define S2MPS11_BUCK9_VSEL_MASK 0x1F #define S2MPS11_ENABLE_MASK (0x03 << S2MPS11_ENABLE_SHIFT) #define S2MPS11_ENABLE_SHIFT 0x06 #define S2MPS11_LDO_N_VOLTAGES (S2MPS11_LDO_VSEL_MASK + 1) #define S2MPS11_BUCK_N_VOLTAGES (S2MPS11_BUCK_VSEL_MASK + 1) +#define S2MPS11_BUCK9_N_VOLTAGES (S2MPS11_BUCK9_VSEL_MASK + 1) #define S2MPS11_RAMP_DELAY 25000 /* uV/us */ #define S2MPS11_CTRL1_PWRHOLD_MASK BIT(4) diff --git a/include/linux/mfd/syscon.h b/include/linux/mfd/syscon.h index 1088149be0c9..40a76b97b7ab 100644 --- a/include/linux/mfd/syscon.h +++ b/include/linux/mfd/syscon.h @@ -16,6 +16,7 @@ #define __LINUX_MFD_SYSCON_H__ #include <linux/err.h> +#include <linux/errno.h> struct device_node; diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h index 9352adc95de6..76f30f940c70 100644 --- a/include/linux/mfd/syscon/exynos5-pmu.h +++ b/include/linux/mfd/syscon/exynos5-pmu.h @@ -38,6 +38,9 @@ /* Exynos5433 specific register definitions */ #define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728) +#define EXYNOS5433_MIPI_PHY0_CONTROL (0x710) +#define EXYNOS5433_MIPI_PHY1_CONTROL (0x714) +#define EXYNOS5433_MIPI_PHY2_CONTROL (0x718) #define EXYNOS5_PHY_ENABLE BIT(0) diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index 238c8db953eb..c8e0164c5423 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -95,6 +95,7 @@ #define IMX6Q_GPR0_DMAREQ_MUX_SEL0_IOMUX BIT(0) #define IMX6Q_GPR1_PCIE_REQ_MASK (0x3 << 30) +#define IMX6Q_GPR1_PCIE_SW_RST BIT(29) #define IMX6Q_GPR1_PCIE_EXIT_L1 BIT(28) #define IMX6Q_GPR1_PCIE_RDY_L23 BIT(27) #define IMX6Q_GPR1_PCIE_ENTER_L1 BIT(26) @@ -447,5 +448,11 @@ #define IMX6UL_GPR1_ENET2_CLK_OUTPUT (0x1 << 18) #define IMX6UL_GPR1_ENET_CLK_DIR (0x3 << 17) #define IMX6UL_GPR1_ENET_CLK_OUTPUT (0x3 << 17) +#define IMX6UL_GPR1_SAI1_MCLK_DIR (0x1 << 19) +#define IMX6UL_GPR1_SAI2_MCLK_DIR (0x1 << 20) +#define IMX6UL_GPR1_SAI3_MCLK_DIR (0x1 << 21) +#define IMX6UL_GPR1_SAI_MCLK_MASK (0x7 << 19) +#define MCLK_DIR(x) (x == 1 ? IMX6UL_GPR1_SAI1_MCLK_DIR : x == 2 ? \ + IMX6UL_GPR1_SAI2_MCLK_DIR : IMX6UL_GPR1_SAI3_MCLK_DIR) #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 05d58ee5e6a7..7a26286db895 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -66,8 +66,8 @@ */ #define TMIO_MMC_SDIO_IRQ (1 << 2) -/* Some controllers don't need to wait 10ms for clock changes */ -#define TMIO_MMC_FAST_CLK_CHG (1 << 3) +/* Some features are only available or tested on RCar Gen2 or later */ +#define TMIO_MMC_MIN_RCAR2 (1 << 3) /* * Some controllers require waiting for the SD bus to become diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 8f9fc3d26e6d..8e95cd87cd74 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -134,6 +134,7 @@ #define TWL6040_HFDACENA (1 << 0) #define TWL6040_HFPGAENA (1 << 1) #define TWL6040_HFDRVENA (1 << 4) +#define TWL6040_HFSWENA (1 << 6) /* VIBCTLL/R (0x18/0x1A) fields */ diff --git a/include/linux/mfd/wm8400-private.h b/include/linux/mfd/wm8400-private.h index 2de565b94d0c..4ee908f5b834 100644 --- a/include/linux/mfd/wm8400-private.h +++ b/include/linux/mfd/wm8400-private.h @@ -923,7 +923,6 @@ struct wm8400 { #define WM8400_LINE_CMP_VTHD_SHIFT 0 /* LINE_CMP_VTHD - [3:0] */ #define WM8400_LINE_CMP_VTHD_WIDTH 4 /* LINE_CMP_VTHD - [3:0] */ -u16 wm8400_reg_read(struct wm8400 *wm8400, u8 reg); int wm8400_block_read(struct wm8400 *wm8400, u8 reg, int count, u16 *data); static inline int wm8400_set_bits(struct wm8400 *wm8400, u8 reg, |