diff options
Diffstat (limited to 'include/linux/pinctrl')
| -rw-r--r-- | include/linux/pinctrl/machine.h | 107 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinctrl.h | 133 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinmux.h | 117 |
3 files changed, 357 insertions, 0 deletions
diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h new file mode 100644 index 000000000000..88863531d862 --- /dev/null +++ b/include/linux/pinctrl/machine.h @@ -0,0 +1,107 @@ +/* + * Machine interface for the pinctrl subsystem. + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINMUX_MACHINE_H +#define __LINUX_PINMUX_MACHINE_H + +/** + * struct pinmux_map - boards/machines shall provide this map for devices + * @name: the name of this specific map entry for the particular machine. + * This is the second parameter passed to pinmux_get() when you want + * to have several mappings to the same device + * @ctrl_dev: the pin control device to be used by this mapping, may be NULL + * if you provide .ctrl_dev_name instead (this is more common) + * @ctrl_dev_name: the name of the device controlling this specific mapping, + * the name must be the same as in your struct device*, may be NULL if + * you provide .ctrl_dev instead + * @function: a function in the driver to use for this mapping, the driver + * will lookup the function referenced by this ID on the specified + * pin control device + * @group: sometimes a function can map to different pin groups, so this + * selects a certain specific pin group to activate for the function, if + * left as NULL, the first applicable group will be used + * @dev: the device using this specific mapping, may be NULL if you provide + * .dev_name instead (this is more common) + * @dev_name: the name of the device using this specific mapping, the name + * must be the same as in your struct device*, may be NULL if you + * provide .dev instead + * @hog_on_boot: if this is set to true, the pin control subsystem will itself + * hog the mappings as the pinmux device drivers are attached, so this is + * typically used with system maps (mux mappings without an assigned + * device) that you want to get hogged and enabled by default as soon as + * a pinmux device supporting it is registered. These maps will not be + * disabled and put until the system shuts down. + */ +struct pinmux_map { + const char *name; + struct device *ctrl_dev; + const char *ctrl_dev_name; + const char *function; + const char *group; + struct device *dev; + const char *dev_name; + const bool hog_on_boot; +}; + +/* + * Convenience macro to set a simple map from a certain pin controller and a + * certain function to a named device + */ +#define PINMUX_MAP(a, b, c, d) \ + { .name = a, .ctrl_dev_name = b, .function = c, .dev_name = d } + +/* + * Convenience macro to map a system function onto a certain pinctrl device. + * System functions are not assigned to a particular device. + */ +#define PINMUX_MAP_SYS(a, b, c) \ + { .name = a, .ctrl_dev_name = b, .function = c } + +/* + * Convenience macro to map a function onto the primary device pinctrl device + * this is especially helpful on systems that have only one pin controller + * or need to set up a lot of mappings on the primary controller. + */ +#define PINMUX_MAP_PRIMARY(a, b, c) \ + { .name = a, .ctrl_dev_name = "pinctrl.0", .function = b, \ + .dev_name = c } + +/* + * Convenience macro to map a system function onto the primary pinctrl device. + * System functions are not assigned to a particular device. + */ +#define PINMUX_MAP_PRIMARY_SYS(a, b) \ + { .name = a, .ctrl_dev_name = "pinctrl.0", .function = b } + +/* + * Convenience macro to map a system function onto the primary pinctrl device, + * to be hogged by the pinmux core until the system shuts down. + */ +#define PINMUX_MAP_PRIMARY_SYS_HOG(a, b) \ + { .name = a, .ctrl_dev_name = "pinctrl.0", .function = b, \ + .hog_on_boot = true } + + +#ifdef CONFIG_PINMUX + +extern int pinmux_register_mappings(struct pinmux_map const *map, + unsigned num_maps); + +#else + +static inline int pinmux_register_mappings(struct pinmux_map const *map, + unsigned num_maps) +{ + return 0; +} + +#endif /* !CONFIG_PINMUX */ +#endif diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h new file mode 100644 index 000000000000..3605e947fa90 --- /dev/null +++ b/include/linux/pinctrl/pinctrl.h @@ -0,0 +1,133 @@ +/* + * Interface the pinctrl subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * This interface is used in the core to keep track of pins. + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINCTRL_PINCTRL_H +#define __LINUX_PINCTRL_PINCTRL_H + +#ifdef CONFIG_PINCTRL + +#include <linux/radix-tree.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/seq_file.h> + +struct pinctrl_dev; +struct pinmux_ops; +struct gpio_chip; + +/** + * struct pinctrl_pin_desc - boards/machines provide information on their + * pins, pads or other muxable units in this struct + * @number: unique pin number from the global pin number space + * @name: a name for this pin + */ +struct pinctrl_pin_desc { + unsigned number; + const char *name; +}; + +/* Convenience macro to define a single named or anonymous pin descriptor */ +#define PINCTRL_PIN(a, b) { .number = a, .name = b } +#define PINCTRL_PIN_ANON(a) { .number = a } + +/** + * struct pinctrl_gpio_range - each pin controller can provide subranges of + * the GPIO number space to be handled by the controller + * @node: list node for internal use + * @name: a name for the chip in this range + * @id: an ID number for the chip in this range + * @base: base offset of the GPIO range + * @npins: number of pins in the GPIO range, including the base number + * @gc: an optional pointer to a gpio_chip + */ +struct pinctrl_gpio_range { + struct list_head node; + const char *name; + unsigned int id; + unsigned int base; + unsigned int npins; + struct gpio_chip *gc; +}; + +/** + * struct pinctrl_ops - global pin control operations, to be implemented by + * pin controller drivers. + * @list_groups: list the number of selectable named groups available + * in this pinmux driver, the core will begin on 0 and call this + * repeatedly as long as it returns >= 0 to enumerate the groups + * @get_group_name: return the group name of the pin group + * @get_group_pins: return an array of pins corresponding to a certain + * group selector @pins, and the size of the array in @num_pins + * @pin_dbg_show: optional debugfs display hook that will provide per-device + * info for a certain pin in debugfs + */ +struct pinctrl_ops { + int (*list_groups) (struct pinctrl_dev *pctldev, unsigned selector); + const char *(*get_group_name) (struct pinctrl_dev *pctldev, + unsigned selector); + int (*get_group_pins) (struct pinctrl_dev *pctldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins); + void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned offset); +}; + +/** + * struct pinctrl_desc - pin controller descriptor, register this to pin + * control subsystem + * @name: name for the pin controller + * @pins: an array of pin descriptors describing all the pins handled by + * this pin controller + * @npins: number of descriptors in the array, usually just ARRAY_SIZE() + * of the pins field above + * @maxpin: since pin spaces may be sparse, there can he "holes" in the + * pin range, this attribute gives the maximum pin number in the + * total range. This should not be lower than npins for example, + * but may be equal to npins if you have no holes in the pin range. + * @pctlops: pin control operation vtable, to support global concepts like + * grouping of pins, this is optional. + * @pmxops: pinmux operation vtable, if you support pinmuxing in your driver + * @owner: module providing the pin controller, used for refcounting + */ +struct pinctrl_desc { + const char *name; + struct pinctrl_pin_desc const *pins; + unsigned int npins; + unsigned int maxpin; + struct pinctrl_ops *pctlops; + struct pinmux_ops *pmxops; + struct module *owner; +}; + +/* External interface to pin controller */ +extern struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, + struct device *dev, void *driver_data); +extern void pinctrl_unregister(struct pinctrl_dev *pctldev); +extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin); +extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range); +extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range); +extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); +extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); +#else + + +/* Sufficiently stupid default function when pinctrl is not in use */ +static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin) +{ + return pin >= 0; +} + +#endif /* !CONFIG_PINCTRL */ + +#endif /* __LINUX_PINCTRL_PINCTRL_H */ diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h new file mode 100644 index 000000000000..3c430e797efc --- /dev/null +++ b/include/linux/pinctrl/pinmux.h @@ -0,0 +1,117 @@ +/* + * Interface the pinmux subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINCTRL_PINMUX_H +#define __LINUX_PINCTRL_PINMUX_H + +#include <linux/list.h> +#include <linux/seq_file.h> +#include "pinctrl.h" + +/* This struct is private to the core and should be regarded as a cookie */ +struct pinmux; + +#ifdef CONFIG_PINMUX + +struct pinctrl_dev; + +/** + * struct pinmux_ops - pinmux operations, to be implemented by pin controller + * drivers that support pinmuxing + * @request: called by the core to see if a certain pin can be made available + * available for muxing. This is called by the core to acquire the pins + * before selecting any actual mux setting across a function. The driver + * is allowed to answer "no" by returning a negative error code + * @free: the reverse function of the request() callback, frees a pin after + * being requested + * @list_functions: list the number of selectable named functions available + * in this pinmux driver, the core will begin on 0 and call this + * repeatedly as long as it returns >= 0 to enumerate mux settings + * @get_function_name: return the function name of the muxing selector, + * called by the core to figure out which mux setting it shall map a + * certain device to + * @get_function_groups: return an array of groups names (in turn + * referencing pins) connected to a certain function selector. The group + * name can be used with the generic @pinctrl_ops to retrieve the + * actual pins affected. The applicable groups will be returned in + * @groups and the number of groups in @num_groups + * @enable: enable a certain muxing function with a certain pin group. The + * driver does not need to figure out whether enabling this function + * conflicts some other use of the pins in that group, such collisions + * are handled by the pinmux subsystem. The @func_selector selects a + * certain function whereas @group_selector selects a certain set of pins + * to be used. On simple controllers the latter argument may be ignored + * @disable: disable a certain muxing selector with a certain pin group + * @gpio_request_enable: requests and enables GPIO on a certain pin. + * Implement this only if you can mux every pin individually as GPIO. The + * affected GPIO range is passed along with an offset into that + * specific GPIO range - function selectors and pin groups are orthogonal + * to this, the core will however make sure the pins do not collide + */ +struct pinmux_ops { + int (*request) (struct pinctrl_dev *pctldev, unsigned offset); + int (*free) (struct pinctrl_dev *pctldev, unsigned offset); + int (*list_functions) (struct pinctrl_dev *pctldev, unsigned selector); + const char *(*get_function_name) (struct pinctrl_dev *pctldev, + unsigned selector); + int (*get_function_groups) (struct pinctrl_dev *pctldev, + unsigned selector, + const char * const **groups, + unsigned * const num_groups); + int (*enable) (struct pinctrl_dev *pctldev, unsigned func_selector, + unsigned group_selector); + void (*disable) (struct pinctrl_dev *pctldev, unsigned func_selector, + unsigned group_selector); + int (*gpio_request_enable) (struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset); +}; + +/* External interface to pinmux */ +extern int pinmux_request_gpio(unsigned gpio); +extern void pinmux_free_gpio(unsigned gpio); +extern struct pinmux * __must_check pinmux_get(struct device *dev, const char *name); +extern void pinmux_put(struct pinmux *pmx); +extern int pinmux_enable(struct pinmux *pmx); +extern void pinmux_disable(struct pinmux *pmx); + +#else /* !CONFIG_PINMUX */ + +static inline int pinmux_request_gpio(unsigned gpio) +{ + return 0; +} + +static inline void pinmux_free_gpio(unsigned gpio) +{ +} + +static inline struct pinmux * __must_check pinmux_get(struct device *dev, const char *name) +{ + return NULL; +} + +static inline void pinmux_put(struct pinmux *pmx) +{ +} + +static inline int pinmux_enable(struct pinmux *pmx) +{ + return 0; +} + +static inline void pinmux_disable(struct pinmux *pmx) +{ +} + +#endif /* CONFIG_PINMUX */ + +#endif /* __LINUX_PINCTRL_PINMUX_H */ |