diff options
Diffstat (limited to 'include/linux/usb/ulpi.h')
| -rw-r--r-- | include/linux/usb/ulpi.h | 134 |
1 files changed, 2 insertions, 132 deletions
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h index 5c295c26ad37..5f07407a367a 100644 --- a/include/linux/usb/ulpi.h +++ b/include/linux/usb/ulpi.h @@ -12,6 +12,8 @@ #define __LINUX_USB_ULPI_H #include <linux/usb/otg.h> +#include <linux/ulpi/regs.h> + /*-------------------------------------------------------------------------*/ /* @@ -49,138 +51,6 @@ /*-------------------------------------------------------------------------*/ -/* - * Macros for Set and Clear - * See ULPI 1.1 specification to find the registers with Set and Clear offsets - */ -#define ULPI_SET(a) (a + 1) -#define ULPI_CLR(a) (a + 2) - -/*-------------------------------------------------------------------------*/ - -/* - * Register Map - */ -#define ULPI_VENDOR_ID_LOW 0x00 -#define ULPI_VENDOR_ID_HIGH 0x01 -#define ULPI_PRODUCT_ID_LOW 0x02 -#define ULPI_PRODUCT_ID_HIGH 0x03 -#define ULPI_FUNC_CTRL 0x04 -#define ULPI_IFC_CTRL 0x07 -#define ULPI_OTG_CTRL 0x0a -#define ULPI_USB_INT_EN_RISE 0x0d -#define ULPI_USB_INT_EN_FALL 0x10 -#define ULPI_USB_INT_STS 0x13 -#define ULPI_USB_INT_LATCH 0x14 -#define ULPI_DEBUG 0x15 -#define ULPI_SCRATCH 0x16 -/* Optional Carkit Registers */ -#define ULPI_CARCIT_CTRL 0x19 -#define ULPI_CARCIT_INT_DELAY 0x1c -#define ULPI_CARCIT_INT_EN 0x1d -#define ULPI_CARCIT_INT_STS 0x20 -#define ULPI_CARCIT_INT_LATCH 0x21 -#define ULPI_CARCIT_PLS_CTRL 0x22 -/* Other Optional Registers */ -#define ULPI_TX_POS_WIDTH 0x25 -#define ULPI_TX_NEG_WIDTH 0x26 -#define ULPI_POLARITY_RECOVERY 0x27 -/* Access Extended Register Set */ -#define ULPI_ACCESS_EXTENDED 0x2f -/* Vendor Specific */ -#define ULPI_VENDOR_SPECIFIC 0x30 -/* Extended Registers */ -#define ULPI_EXT_VENDOR_SPECIFIC 0x80 - -/*-------------------------------------------------------------------------*/ - -/* - * Register Bits - */ - -/* Function Control */ -#define ULPI_FUNC_CTRL_XCVRSEL (1 << 0) -#define ULPI_FUNC_CTRL_XCVRSEL_MASK (3 << 0) -#define ULPI_FUNC_CTRL_HIGH_SPEED (0 << 0) -#define ULPI_FUNC_CTRL_FULL_SPEED (1 << 0) -#define ULPI_FUNC_CTRL_LOW_SPEED (2 << 0) -#define ULPI_FUNC_CTRL_FS4LS (3 << 0) -#define ULPI_FUNC_CTRL_TERMSELECT (1 << 2) -#define ULPI_FUNC_CTRL_OPMODE (1 << 3) -#define ULPI_FUNC_CTRL_OPMODE_MASK (3 << 3) -#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0 << 3) -#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (1 << 3) -#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (2 << 3) -#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (3 << 3) -#define ULPI_FUNC_CTRL_RESET (1 << 5) -#define ULPI_FUNC_CTRL_SUSPENDM (1 << 6) - -/* Interface Control */ -#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE (1 << 0) -#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE (1 << 1) -#define ULPI_IFC_CTRL_CARKITMODE (1 << 2) -#define ULPI_IFC_CTRL_CLOCKSUSPENDM (1 << 3) -#define ULPI_IFC_CTRL_AUTORESUME (1 << 4) -#define ULPI_IFC_CTRL_EXTERNAL_VBUS (1 << 5) -#define ULPI_IFC_CTRL_PASSTHRU (1 << 6) -#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE (1 << 7) - -/* OTG Control */ -#define ULPI_OTG_CTRL_ID_PULLUP (1 << 0) -#define ULPI_OTG_CTRL_DP_PULLDOWN (1 << 1) -#define ULPI_OTG_CTRL_DM_PULLDOWN (1 << 2) -#define ULPI_OTG_CTRL_DISCHRGVBUS (1 << 3) -#define ULPI_OTG_CTRL_CHRGVBUS (1 << 4) -#define ULPI_OTG_CTRL_DRVVBUS (1 << 5) -#define ULPI_OTG_CTRL_DRVVBUS_EXT (1 << 6) -#define ULPI_OTG_CTRL_EXTVBUSIND (1 << 7) - -/* USB Interrupt Enable Rising, - * USB Interrupt Enable Falling, - * USB Interrupt Status and - * USB Interrupt Latch - */ -#define ULPI_INT_HOST_DISCONNECT (1 << 0) -#define ULPI_INT_VBUS_VALID (1 << 1) -#define ULPI_INT_SESS_VALID (1 << 2) -#define ULPI_INT_SESS_END (1 << 3) -#define ULPI_INT_IDGRD (1 << 4) - -/* Debug */ -#define ULPI_DEBUG_LINESTATE0 (1 << 0) -#define ULPI_DEBUG_LINESTATE1 (1 << 1) - -/* Carkit Control */ -#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0) -#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1) -#define ULPI_CARKIT_CTRL_TXDEN (1 << 2) -#define ULPI_CARKIT_CTRL_RXDEN (1 << 3) -#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4) -#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5) -#define ULPI_CARKIT_CTRL_MICEN (1 << 6) - -/* Carkit Interrupt Enable */ -#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0) -#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1) -#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2) -#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3) -#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4) - -/* Carkit Interrupt Status and - * Carkit Interrupt Latch - */ -#define ULPI_CARKIT_INT_IDFLOAT (1 << 0) -#define ULPI_CARKIT_INT_CARINTDET (1 << 1) -#define ULPI_CARKIT_INT_DP (1 << 2) - -/* Carkit Pulse Control*/ -#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0) -#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1) -#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2) -#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3) - -/*-------------------------------------------------------------------------*/ - #if IS_ENABLED(CONFIG_USB_ULPI) struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags); |