diff options
Diffstat (limited to 'include/linux/wimax/i2400m.h')
-rw-r--r-- | include/linux/wimax/i2400m.h | 572 |
1 files changed, 0 insertions, 572 deletions
diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h deleted file mode 100644 index 62d356153565..000000000000 --- a/include/linux/wimax/i2400m.h +++ /dev/null @@ -1,572 +0,0 @@ -/* - * Intel Wireless WiMax Connection 2400m - * Host-Device protocol interface definitions - * - * - * Copyright (C) 2007-2008 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * Intel Corporation <linux-wimax@intel.com> - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - Initial implementation - * - * - * This header defines the data structures and constants used to - * communicate with the device. - * - * BOOTMODE/BOOTROM/FIRMWARE UPLOAD PROTOCOL - * - * The firmware upload protocol is quite simple and only requires a - * handful of commands. See drivers/net/wimax/i2400m/fw.c for more - * details. - * - * The BCF data structure is for the firmware file header. - * - * - * THE DATA / CONTROL PROTOCOL - * - * This is the normal protocol spoken with the device once the - * firmware is uploaded. It transports data payloads and control - * messages back and forth. - * - * It consists 'messages' that pack one or more payloads each. The - * format is described in detail in drivers/net/wimax/i2400m/rx.c and - * tx.c. - * - * - * THE L3L4 PROTOCOL - * - * The term L3L4 refers to Layer 3 (the device), Layer 4 (the - * driver/host software). - * - * This is the control protocol used by the host to control the i2400m - * device (scan, connect, disconnect...). This is sent to / received - * as control frames. These frames consist of a header and zero or - * more TLVs with information. We call each control frame a "message". - * - * Each message is composed of: - * - * HEADER - * [TLV0 + PAYLOAD0] - * [TLV1 + PAYLOAD1] - * [...] - * [TLVN + PAYLOADN] - * - * The HEADER is defined by 'struct i2400m_l3l4_hdr'. The payloads are - * defined by a TLV structure (Type Length Value) which is a 'header' - * (struct i2400m_tlv_hdr) and then the payload. - * - * All integers are represented as Little Endian. - * - * - REQUESTS AND EVENTS - * - * The requests can be clasified as follows: - * - * COMMAND: implies a request from the host to the device requesting - * an action being performed. The device will reply with a - * message (with the same type as the command), status and - * no (TLV) payload. Execution of a command might cause - * events (of different type) to be sent later on as - * device's state changes. - * - * GET/SET: similar to COMMAND, but will not cause other - * EVENTs. The reply, in the case of GET, will contain - * TLVs with the requested information. - * - * EVENT: asynchronous messages sent from the device, maybe as a - * consequence of previous COMMANDs but disassociated from - * them. - * - * Only one request might be pending at the same time (ie: don't - * parallelize nor post another GET request before the previous - * COMMAND has been acknowledged with it's corresponding reply by the - * device). - * - * The different requests and their formats are described below: - * - * I2400M_MT_* Message types - * I2400M_MS_* Message status (for replies, events) - * i2400m_tlv_* TLVs - * - * data types are named 'struct i2400m_msg_OPNAME', OPNAME matching the - * operation. - */ - -#ifndef __LINUX__WIMAX__I2400M_H__ -#define __LINUX__WIMAX__I2400M_H__ - -#include <linux/types.h> - - -/* - * Host Device Interface (HDI) common to all busses - */ - -/* Boot-mode (firmware upload mode) commands */ - -/* Header for the firmware file */ -struct i2400m_bcf_hdr { - __le32 module_type; - __le32 header_len; - __le32 header_version; - __le32 module_id; - __le32 module_vendor; - __le32 date; /* BCD YYYMMDD */ - __le32 size; /* in dwords */ - __le32 key_size; /* in dwords */ - __le32 modulus_size; /* in dwords */ - __le32 exponent_size; /* in dwords */ - __u8 reserved[88]; -} __attribute__ ((packed)); - -/* Boot mode opcodes */ -enum i2400m_brh_opcode { - I2400M_BRH_READ = 1, - I2400M_BRH_WRITE = 2, - I2400M_BRH_JUMP = 3, - I2400M_BRH_SIGNED_JUMP = 8, - I2400M_BRH_HASH_PAYLOAD_ONLY = 9, -}; - -/* Boot mode command masks and stuff */ -enum i2400m_brh { - I2400M_BRH_SIGNATURE = 0xcbbc0000, - I2400M_BRH_SIGNATURE_MASK = 0xffff0000, - I2400M_BRH_SIGNATURE_SHIFT = 16, - I2400M_BRH_OPCODE_MASK = 0x0000000f, - I2400M_BRH_RESPONSE_MASK = 0x000000f0, - I2400M_BRH_RESPONSE_SHIFT = 4, - I2400M_BRH_DIRECT_ACCESS = 0x00000400, - I2400M_BRH_RESPONSE_REQUIRED = 0x00000200, - I2400M_BRH_USE_CHECKSUM = 0x00000100, -}; - - -/** - * i2400m_bootrom_header - Header for a boot-mode command - * - * @cmd: the above command descriptor - * @target_addr: where on the device memory should the action be performed. - * @data_size: for read/write, amount of data to be read/written - * @block_checksum: checksum value (if applicable) - * @payload: the beginning of data attached to this header - */ -struct i2400m_bootrom_header { - __le32 command; /* Compose with enum i2400_brh */ - __le32 target_addr; - __le32 data_size; - __le32 block_checksum; - char payload[0]; -} __attribute__ ((packed)); - - -/* - * Data / control protocol - */ - -/* Packet types for the host-device interface */ -enum i2400m_pt { - I2400M_PT_DATA = 0, - I2400M_PT_CTRL, - I2400M_PT_TRACE, /* For device debug */ - I2400M_PT_RESET_WARM, /* device reset */ - I2400M_PT_RESET_COLD, /* USB[transport] reset, like reconnect */ - I2400M_PT_EDATA, /* Extended RX data */ - I2400M_PT_ILLEGAL -}; - - -/* - * Payload for a data packet - * - * This is prefixed to each and every outgoing DATA type. - */ -struct i2400m_pl_data_hdr { - __le32 reserved; -} __attribute__((packed)); - - -/* - * Payload for an extended data packet - * - * New in fw v1.4 - * - * @reorder: if this payload has to be reorder or not (and how) - * @cs: the type of data in the packet, as defined per (802.16e - * T11.13.19.1). Currently only 2 (IPv4 packet) supported. - * - * This is prefixed to each and every INCOMING DATA packet. - */ -struct i2400m_pl_edata_hdr { - __le32 reorder; /* bits defined in i2400m_ro */ - __u8 cs; - __u8 reserved[11]; -} __attribute__((packed)); - -enum i2400m_cs { - I2400M_CS_IPV4_0 = 0, - I2400M_CS_IPV4 = 2, -}; - -enum i2400m_ro { - I2400M_RO_NEEDED = 0x01, - I2400M_RO_TYPE = 0x03, - I2400M_RO_TYPE_SHIFT = 1, - I2400M_RO_CIN = 0x0f, - I2400M_RO_CIN_SHIFT = 4, - I2400M_RO_FBN = 0x07ff, - I2400M_RO_FBN_SHIFT = 8, - I2400M_RO_SN = 0x07ff, - I2400M_RO_SN_SHIFT = 21, -}; - -enum i2400m_ro_type { - I2400M_RO_TYPE_RESET = 0, - I2400M_RO_TYPE_PACKET, - I2400M_RO_TYPE_WS, - I2400M_RO_TYPE_PACKET_WS, -}; - - -/* Misc constants */ -enum { - I2400M_PL_ALIGN = 16, /* Payload data size alignment */ - I2400M_PL_SIZE_MAX = 0x3EFF, - I2400M_MAX_PLS_IN_MSG = 60, - /* protocol barkers: sync sequences; for notifications they - * are sent in groups of four. */ - I2400M_H2D_PREVIEW_BARKER = 0xcafe900d, - I2400M_COLD_RESET_BARKER = 0xc01dc01d, - I2400M_WARM_RESET_BARKER = 0x50f750f7, - I2400M_NBOOT_BARKER = 0xdeadbeef, - I2400M_SBOOT_BARKER = 0x0ff1c1a1, - I2400M_SBOOT_BARKER_6050 = 0x80000001, - I2400M_ACK_BARKER = 0xfeedbabe, - I2400M_D2H_MSG_BARKER = 0xbeefbabe, -}; - - -/* - * Hardware payload descriptor - * - * Bitfields encoded in a struct to enforce typing semantics. - * - * Look in rx.c and tx.c for a full description of the format. - */ -struct i2400m_pld { - __le32 val; -} __attribute__ ((packed)); - -#define I2400M_PLD_SIZE_MASK 0x00003fff -#define I2400M_PLD_TYPE_SHIFT 16 -#define I2400M_PLD_TYPE_MASK 0x000f0000 - -/* - * Header for a TX message or RX message - * - * @barker: preamble - * @size: used for management of the FIFO queue buffer; before - * sending, this is converted to be a real preamble. This - * indicates the real size of the TX message that starts at this - * point. If the highest bit is set, then this message is to be - * skipped. - * @sequence: sequence number of this message - * @offset: offset where the message itself starts -- see the comments - * in the file header about message header and payload descriptor - * alignment. - * @num_pls: number of payloads in this message - * @padding: amount of padding bytes at the end of the message to make - * it be of block-size aligned - * - * Look in rx.c and tx.c for a full description of the format. - */ -struct i2400m_msg_hdr { - union { - __le32 barker; - __u32 size; /* same size type as barker!! */ - }; - union { - __le32 sequence; - __u32 offset; /* same size type as barker!! */ - }; - __le16 num_pls; - __le16 rsv1; - __le16 padding; - __le16 rsv2; - struct i2400m_pld pld[0]; -} __attribute__ ((packed)); - - - -/* - * L3/L4 control protocol - */ - -enum { - /* Interface version */ - I2400M_L3L4_VERSION = 0x0100, -}; - -/* Message types */ -enum i2400m_mt { - I2400M_MT_RESERVED = 0x0000, - I2400M_MT_INVALID = 0xffff, - I2400M_MT_REPORT_MASK = 0x8000, - - I2400M_MT_GET_SCAN_RESULT = 0x4202, - I2400M_MT_SET_SCAN_PARAM = 0x4402, - I2400M_MT_CMD_RF_CONTROL = 0x4602, - I2400M_MT_CMD_SCAN = 0x4603, - I2400M_MT_CMD_CONNECT = 0x4604, - I2400M_MT_CMD_DISCONNECT = 0x4605, - I2400M_MT_CMD_EXIT_IDLE = 0x4606, - I2400M_MT_GET_LM_VERSION = 0x5201, - I2400M_MT_GET_DEVICE_INFO = 0x5202, - I2400M_MT_GET_LINK_STATUS = 0x5203, - I2400M_MT_GET_STATISTICS = 0x5204, - I2400M_MT_GET_STATE = 0x5205, - I2400M_MT_GET_MEDIA_STATUS = 0x5206, - I2400M_MT_SET_INIT_CONFIG = 0x5404, - I2400M_MT_CMD_INIT = 0x5601, - I2400M_MT_CMD_TERMINATE = 0x5602, - I2400M_MT_CMD_MODE_OF_OP = 0x5603, - I2400M_MT_CMD_RESET_DEVICE = 0x5604, - I2400M_MT_CMD_MONITOR_CONTROL = 0x5605, - I2400M_MT_CMD_ENTER_POWERSAVE = 0x5606, - I2400M_MT_GET_TLS_OPERATION_RESULT = 0x6201, - I2400M_MT_SET_EAP_SUCCESS = 0x6402, - I2400M_MT_SET_EAP_FAIL = 0x6403, - I2400M_MT_SET_EAP_KEY = 0x6404, - I2400M_MT_CMD_SEND_EAP_RESPONSE = 0x6602, - I2400M_MT_REPORT_SCAN_RESULT = 0xc002, - I2400M_MT_REPORT_STATE = 0xd002, - I2400M_MT_REPORT_POWERSAVE_READY = 0xd005, - I2400M_MT_REPORT_EAP_REQUEST = 0xe002, - I2400M_MT_REPORT_EAP_RESTART = 0xe003, - I2400M_MT_REPORT_ALT_ACCEPT = 0xe004, - I2400M_MT_REPORT_KEY_REQUEST = 0xe005, -}; - - -/* - * Message Ack Status codes - * - * When a message is replied-to, this status is reported. - */ -enum i2400m_ms { - I2400M_MS_DONE_OK = 0, - I2400M_MS_DONE_IN_PROGRESS = 1, - I2400M_MS_INVALID_OP = 2, - I2400M_MS_BAD_STATE = 3, - I2400M_MS_ILLEGAL_VALUE = 4, - I2400M_MS_MISSING_PARAMS = 5, - I2400M_MS_VERSION_ERROR = 6, - I2400M_MS_ACCESSIBILITY_ERROR = 7, - I2400M_MS_BUSY = 8, - I2400M_MS_CORRUPTED_TLV = 9, - I2400M_MS_UNINITIALIZED = 10, - I2400M_MS_UNKNOWN_ERROR = 11, - I2400M_MS_PRODUCTION_ERROR = 12, - I2400M_MS_NO_RF = 13, - I2400M_MS_NOT_READY_FOR_POWERSAVE = 14, - I2400M_MS_THERMAL_CRITICAL = 15, - I2400M_MS_MAX -}; - - -/** - * i2400m_tlv - enumeration of the different types of TLVs - * - * TLVs stand for type-length-value and are the header for a payload - * composed of almost anything. Each payload has a type assigned - * and a length. - */ -enum i2400m_tlv { - I2400M_TLV_L4_MESSAGE_VERSIONS = 129, - I2400M_TLV_SYSTEM_STATE = 141, - I2400M_TLV_MEDIA_STATUS = 161, - I2400M_TLV_RF_OPERATION = 162, - I2400M_TLV_RF_STATUS = 163, - I2400M_TLV_DEVICE_RESET_TYPE = 132, - I2400M_TLV_CONFIG_IDLE_PARAMETERS = 601, - I2400M_TLV_CONFIG_IDLE_TIMEOUT = 611, - I2400M_TLV_CONFIG_D2H_DATA_FORMAT = 614, - I2400M_TLV_CONFIG_DL_HOST_REORDER = 615, -}; - - -struct i2400m_tlv_hdr { - __le16 type; - __le16 length; /* payload's */ - __u8 pl[0]; -} __attribute__((packed)); - - -struct i2400m_l3l4_hdr { - __le16 type; - __le16 length; /* payload's */ - __le16 version; - __le16 resv1; - __le16 status; - __le16 resv2; - struct i2400m_tlv_hdr pl[0]; -} __attribute__((packed)); - - -/** - * i2400m_system_state - different states of the device - */ -enum i2400m_system_state { - I2400M_SS_UNINITIALIZED = 1, - I2400M_SS_INIT, - I2400M_SS_READY, - I2400M_SS_SCAN, - I2400M_SS_STANDBY, - I2400M_SS_CONNECTING, - I2400M_SS_WIMAX_CONNECTED, - I2400M_SS_DATA_PATH_CONNECTED, - I2400M_SS_IDLE, - I2400M_SS_DISCONNECTING, - I2400M_SS_OUT_OF_ZONE, - I2400M_SS_SLEEPACTIVE, - I2400M_SS_PRODUCTION, - I2400M_SS_CONFIG, - I2400M_SS_RF_OFF, - I2400M_SS_RF_SHUTDOWN, - I2400M_SS_DEVICE_DISCONNECT, - I2400M_SS_MAX, -}; - - -/** - * i2400m_tlv_system_state - report on the state of the system - * - * @state: see enum i2400m_system_state - */ -struct i2400m_tlv_system_state { - struct i2400m_tlv_hdr hdr; - __le32 state; -} __attribute__((packed)); - - -struct i2400m_tlv_l4_message_versions { - struct i2400m_tlv_hdr hdr; - __le16 major; - __le16 minor; - __le16 branch; - __le16 reserved; -} __attribute__((packed)); - - -struct i2400m_tlv_detailed_device_info { - struct i2400m_tlv_hdr hdr; - __u8 reserved1[400]; - __u8 mac_address[6]; - __u8 reserved2[2]; -} __attribute__((packed)); - - -enum i2400m_rf_switch_status { - I2400M_RF_SWITCH_ON = 1, - I2400M_RF_SWITCH_OFF = 2, -}; - -struct i2400m_tlv_rf_switches_status { - struct i2400m_tlv_hdr hdr; - __u8 sw_rf_switch; /* 1 ON, 2 OFF */ - __u8 hw_rf_switch; /* 1 ON, 2 OFF */ - __u8 reserved[2]; -} __attribute__((packed)); - - -enum { - i2400m_rf_operation_on = 1, - i2400m_rf_operation_off = 2 -}; - -struct i2400m_tlv_rf_operation { - struct i2400m_tlv_hdr hdr; - __le32 status; /* 1 ON, 2 OFF */ -} __attribute__((packed)); - - -enum i2400m_tlv_reset_type { - I2400M_RESET_TYPE_COLD = 1, - I2400M_RESET_TYPE_WARM -}; - -struct i2400m_tlv_device_reset_type { - struct i2400m_tlv_hdr hdr; - __le32 reset_type; -} __attribute__((packed)); - - -struct i2400m_tlv_config_idle_parameters { - struct i2400m_tlv_hdr hdr; - __le32 idle_timeout; /* 100 to 300000 ms [5min], 100 increments - * 0 disabled */ - __le32 idle_paging_interval; /* frames */ -} __attribute__((packed)); - - -enum i2400m_media_status { - I2400M_MEDIA_STATUS_LINK_UP = 1, - I2400M_MEDIA_STATUS_LINK_DOWN, - I2400M_MEDIA_STATUS_LINK_RENEW, -}; - -struct i2400m_tlv_media_status { - struct i2400m_tlv_hdr hdr; - __le32 media_status; -} __attribute__((packed)); - - -/* New in v1.4 */ -struct i2400m_tlv_config_idle_timeout { - struct i2400m_tlv_hdr hdr; - __le32 timeout; /* 100 to 300000 ms [5min], 100 increments - * 0 disabled */ -} __attribute__((packed)); - -/* New in v1.4 -- for backward compat, will be removed */ -struct i2400m_tlv_config_d2h_data_format { - struct i2400m_tlv_hdr hdr; - __u8 format; /* 0 old format, 1 enhanced */ - __u8 reserved[3]; -} __attribute__((packed)); - -/* New in v1.4 */ -struct i2400m_tlv_config_dl_host_reorder { - struct i2400m_tlv_hdr hdr; - __u8 reorder; /* 0 disabled, 1 enabled */ - __u8 reserved[3]; -} __attribute__((packed)); - - -#endif /* #ifndef __LINUX__WIMAX__I2400M_H__ */ |