diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/mtd/cfi.h | 188 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 6 |
2 files changed, 13 insertions, 181 deletions
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 299d7d31fe53..9b57a9b1b081 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -296,183 +296,19 @@ struct cfi_private { struct flchip chips[0]; /* per-chip data structure for each chip */ }; -/* - * Returns the command address according to the given geometry. - */ -static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, - struct map_info *map, struct cfi_private *cfi) -{ - unsigned bankwidth = map_bankwidth(map); - unsigned interleave = cfi_interleave(cfi); - unsigned type = cfi->device_type; - uint32_t addr; - - addr = (cmd_ofs * type) * interleave; - - /* Modify the unlock address if we are in compatibility mode. - * For 16bit devices on 8 bit busses - * and 32bit devices on 16 bit busses - * set the low bit of the alternating bit sequence of the address. - */ - if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa)) - addr |= (type >> 1)*interleave; - - return addr; -} - -/* - * Transforms the CFI command for the given geometry (bus width & interleave). - * It looks too long to be inline, but in the common case it should almost all - * get optimised away. - */ -static inline map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi) -{ - map_word val = { {0} }; - int wordwidth, words_per_bus, chip_mode, chips_per_word; - unsigned long onecmd; - int i; - - /* We do it this way to give the compiler a fighting chance - of optimising away all the crap for 'bankwidth' larger than - an unsigned long, in the common case where that support is - disabled */ - if (map_bankwidth_is_large(map)) { - wordwidth = sizeof(unsigned long); - words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 - } else { - wordwidth = map_bankwidth(map); - words_per_bus = 1; - } - - chip_mode = map_bankwidth(map) / cfi_interleave(cfi); - chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); - - /* First, determine what the bit-pattern should be for a single - device, according to chip mode and endianness... */ - switch (chip_mode) { - default: BUG(); - case 1: - onecmd = cmd; - break; - case 2: - onecmd = cpu_to_cfi16(map, cmd); - break; - case 4: - onecmd = cpu_to_cfi32(map, cmd); - break; - } - - /* Now replicate it across the size of an unsigned long, or - just to the bus width as appropriate */ - switch (chips_per_word) { - default: BUG(); -#if BITS_PER_LONG >= 64 - case 8: - onecmd |= (onecmd << (chip_mode * 32)); -#endif - case 4: - onecmd |= (onecmd << (chip_mode * 16)); - case 2: - onecmd |= (onecmd << (chip_mode * 8)); - case 1: - ; - } +uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, + struct map_info *map, struct cfi_private *cfi); - /* And finally, for the multi-word case, replicate it - in all words in the structure */ - for (i=0; i < words_per_bus; i++) { - val.x[i] = onecmd; - } - - return val; -} +map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi); #define CMD(x) cfi_build_cmd((x), map, cfi) - -static inline unsigned long cfi_merge_status(map_word val, struct map_info *map, - struct cfi_private *cfi) -{ - int wordwidth, words_per_bus, chip_mode, chips_per_word; - unsigned long onestat, res = 0; - int i; - - /* We do it this way to give the compiler a fighting chance - of optimising away all the crap for 'bankwidth' larger than - an unsigned long, in the common case where that support is - disabled */ - if (map_bankwidth_is_large(map)) { - wordwidth = sizeof(unsigned long); - words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 - } else { - wordwidth = map_bankwidth(map); - words_per_bus = 1; - } - - chip_mode = map_bankwidth(map) / cfi_interleave(cfi); - chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); - - onestat = val.x[0]; - /* Or all status words together */ - for (i=1; i < words_per_bus; i++) { - onestat |= val.x[i]; - } - - res = onestat; - switch(chips_per_word) { - default: BUG(); -#if BITS_PER_LONG >= 64 - case 8: - res |= (onestat >> (chip_mode * 32)); -#endif - case 4: - res |= (onestat >> (chip_mode * 16)); - case 2: - res |= (onestat >> (chip_mode * 8)); - case 1: - ; - } - - /* Last, determine what the bit-pattern should be for a single - device, according to chip mode and endianness... */ - switch (chip_mode) { - case 1: - break; - case 2: - res = cfi16_to_cpu(map, res); - break; - case 4: - res = cfi32_to_cpu(map, res); - break; - default: BUG(); - } - return res; -} - +unsigned long cfi_merge_status(map_word val, struct map_info *map, + struct cfi_private *cfi); #define MERGESTATUS(x) cfi_merge_status((x), map, cfi) - -/* - * Sends a CFI command to a bank of flash for the given geometry. - * - * Returns the offset in flash where the command was written. - * If prev_val is non-null, it will be set to the value at the command address, - * before the command was written. - */ -static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, +uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, struct map_info *map, struct cfi_private *cfi, - int type, map_word *prev_val) -{ - map_word val; - uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi); - val = cfi_build_cmd(cmd, map, cfi); - - if (prev_val) - *prev_val = map_read(map, addr); - - map_write(map, val, addr); - - return addr - base; -} + int type, map_word *prev_val); static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr) { @@ -506,15 +342,7 @@ static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr) } } -static inline void cfi_udelay(int us) -{ - if (us >= 1000) { - msleep((us+999)/1000); - } else { - udelay(us); - cond_resched(); - } -} +void cfi_udelay(int us); int __xipram cfi_qry_present(struct map_info *map, __u32 base, struct cfi_private *cfi); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 3d4ea7eb2b68..f25e2bdd188c 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -26,6 +26,8 @@ struct mtd_info; struct nand_flash_dev; +struct device_node; + /* Scan and identify a NAND device */ extern int nand_scan(struct mtd_info *mtd, int max_chips); /* @@ -542,6 +544,7 @@ struct nand_buffers { * flash device * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the * flash device. + * @dn: [BOARDSPECIFIC] device node describing this instance * @read_byte: [REPLACEABLE] read one byte from the chip * @read_word: [REPLACEABLE] read one word from the chip * @write_byte: [REPLACEABLE] write a single byte to the chip on the @@ -644,6 +647,8 @@ struct nand_chip { void __iomem *IO_ADDR_R; void __iomem *IO_ADDR_W; + struct device_node *dn; + uint8_t (*read_byte)(struct mtd_info *mtd); u16 (*read_word)(struct mtd_info *mtd); void (*write_byte)(struct mtd_info *mtd, uint8_t byte); @@ -833,7 +838,6 @@ struct nand_manufacturers { extern struct nand_flash_dev nand_flash_ids[]; extern struct nand_manufacturers nand_manuf_ids[]; -extern int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); extern int nand_default_bbt(struct mtd_info *mtd); extern int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); extern int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs); |