diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/platform_data/x86/asus-wmi.h | 1 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/p2sb.h | 28 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/pmc_atom.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/x86/simatic-ipc-base.h | 2 | ||||
| -rw-r--r-- | include/linux/surface_aggregator/controller.h | 149 | ||||
| -rw-r--r-- | include/linux/surface_aggregator/device.h | 213 | ||||
| -rw-r--r-- | include/linux/surface_aggregator/serial_hub.h | 75 |
7 files changed, 427 insertions, 43 deletions
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index a571b47ff362..98f2b2f20f3e 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -49,6 +49,7 @@ #define ASUS_WMI_DEVID_LED4 0x00020014 #define ASUS_WMI_DEVID_LED5 0x00020015 #define ASUS_WMI_DEVID_LED6 0x00020016 +#define ASUS_WMI_DEVID_MICMUTE_LED 0x00040017 /* Backlight and Brightness */ #define ASUS_WMI_DEVID_ALS_ENABLE 0x00050001 /* Ambient Light Sensor */ diff --git a/include/linux/platform_data/x86/p2sb.h b/include/linux/platform_data/x86/p2sb.h new file mode 100644 index 000000000000..a1d5fddc8f13 --- /dev/null +++ b/include/linux/platform_data/x86/p2sb.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Primary to Sideband (P2SB) bridge access support + */ + +#ifndef _PLATFORM_DATA_X86_P2SB_H +#define _PLATFORM_DATA_X86_P2SB_H + +#include <linux/errno.h> +#include <linux/kconfig.h> + +struct pci_bus; +struct resource; + +#if IS_BUILTIN(CONFIG_P2SB) + +int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem); + +#else /* CONFIG_P2SB */ + +static inline int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem) +{ + return -ENODEV; +} + +#endif /* CONFIG_P2SB is not set */ + +#endif /* _PLATFORM_DATA_X86_P2SB_H */ diff --git a/include/linux/platform_data/x86/pmc_atom.h b/include/linux/platform_data/x86/pmc_atom.h index 6807839c718b..3edfb6d4e67a 100644 --- a/include/linux/platform_data/x86/pmc_atom.h +++ b/include/linux/platform_data/x86/pmc_atom.h @@ -47,7 +47,7 @@ #define PMC_S0I2_TMR 0x88 #define PMC_S0I3_TMR 0x8C #define PMC_S0_TMR 0x90 -/* Sleep state counter is in units of of 32us */ +/* Sleep state counter is in units of 32us */ #define PMC_TMR_SHIFT 5 /* Power status of power islands */ diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h index 62d2bc774067..39fefd48cf4d 100644 --- a/include/linux/platform_data/x86/simatic-ipc-base.h +++ b/include/linux/platform_data/x86/simatic-ipc-base.h @@ -24,6 +24,4 @@ struct simatic_ipc_platform { u8 devmode; }; -u32 simatic_ipc_get_membase0(unsigned int p2sb); - #endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H */ diff --git a/include/linux/surface_aggregator/controller.h b/include/linux/surface_aggregator/controller.h index 74bfdffaf7b0..d11a1c6e3186 100644 --- a/include/linux/surface_aggregator/controller.h +++ b/include/linux/surface_aggregator/controller.h @@ -470,6 +470,67 @@ struct ssam_request_spec_md { } /** + * SSAM_DEFINE_SYNC_REQUEST_WR() - Define synchronous SAM request function with + * both argument and return value. + * @name: Name of the generated function. + * @atype: Type of the request's argument. + * @rtype: Type of the request's return value. + * @spec: Specification (&struct ssam_request_spec) defining the request. + * + * Defines a function executing the synchronous SAM request specified by @spec, + * with the request taking an argument of type @atype and having a return value + * of type @rtype. The generated function takes care of setting up the request + * and response structs, buffer allocation, as well as execution of the request + * itself, returning once the request has been fully completed. The required + * transport buffer will be allocated on the stack. + * + * The generated function is defined as ``static int name(struct + * ssam_controller *ctrl, const atype *arg, rtype *ret)``, returning the status + * of the request, which is zero on success and negative on failure. The + * ``ctrl`` parameter is the controller via which the request is sent. The + * request argument is specified via the ``arg`` pointer. The request's return + * value is written to the memory pointed to by the ``ret`` parameter. + * + * Refer to ssam_request_sync_onstack() for more details on the behavior of + * the generated function. + */ +#define SSAM_DEFINE_SYNC_REQUEST_WR(name, atype, rtype, spec...) \ + static int name(struct ssam_controller *ctrl, const atype *arg, rtype *ret) \ + { \ + struct ssam_request_spec s = (struct ssam_request_spec)spec; \ + struct ssam_request rqst; \ + struct ssam_response rsp; \ + int status; \ + \ + rqst.target_category = s.target_category; \ + rqst.target_id = s.target_id; \ + rqst.command_id = s.command_id; \ + rqst.instance_id = s.instance_id; \ + rqst.flags = s.flags | SSAM_REQUEST_HAS_RESPONSE; \ + rqst.length = sizeof(atype); \ + rqst.payload = (u8 *)arg; \ + \ + rsp.capacity = sizeof(rtype); \ + rsp.length = 0; \ + rsp.pointer = (u8 *)ret; \ + \ + status = ssam_request_sync_onstack(ctrl, &rqst, &rsp, sizeof(atype)); \ + if (status) \ + return status; \ + \ + if (rsp.length != sizeof(rtype)) { \ + struct device *dev = ssam_controller_device(ctrl); \ + dev_err(dev, \ + "rqst: invalid response length, expected %zu, got %zu (tc: %#04x, cid: %#04x)", \ + sizeof(rtype), rsp.length, rqst.target_category,\ + rqst.command_id); \ + return -EIO; \ + } \ + \ + return 0; \ + } + +/** * SSAM_DEFINE_SYNC_REQUEST_MD_N() - Define synchronous multi-device SAM * request function with neither argument nor return value. * @name: Name of the generated function. @@ -613,6 +674,70 @@ struct ssam_request_spec_md { return 0; \ } +/** + * SSAM_DEFINE_SYNC_REQUEST_MD_WR() - Define synchronous multi-device SAM + * request function with both argument and return value. + * @name: Name of the generated function. + * @atype: Type of the request's argument. + * @rtype: Type of the request's return value. + * @spec: Specification (&struct ssam_request_spec_md) defining the request. + * + * Defines a function executing the synchronous SAM request specified by @spec, + * with the request taking an argument of type @atype and having a return value + * of type @rtype. Device specifying parameters are not hard-coded, but instead + * must be provided to the function. The generated function takes care of + * setting up the request and response structs, buffer allocation, as well as + * execution of the request itself, returning once the request has been fully + * completed. The required transport buffer will be allocated on the stack. + * + * The generated function is defined as ``static int name(struct + * ssam_controller *ctrl, u8 tid, u8 iid, const atype *arg, rtype *ret)``, + * returning the status of the request, which is zero on success and negative + * on failure. The ``ctrl`` parameter is the controller via which the request + * is sent, ``tid`` the target ID for the request, and ``iid`` the instance ID. + * The request argument is specified via the ``arg`` pointer. The request's + * return value is written to the memory pointed to by the ``ret`` parameter. + * + * Refer to ssam_request_sync_onstack() for more details on the behavior of + * the generated function. + */ +#define SSAM_DEFINE_SYNC_REQUEST_MD_WR(name, atype, rtype, spec...) \ + static int name(struct ssam_controller *ctrl, u8 tid, u8 iid, \ + const atype *arg, rtype *ret) \ + { \ + struct ssam_request_spec_md s = (struct ssam_request_spec_md)spec; \ + struct ssam_request rqst; \ + struct ssam_response rsp; \ + int status; \ + \ + rqst.target_category = s.target_category; \ + rqst.target_id = tid; \ + rqst.command_id = s.command_id; \ + rqst.instance_id = iid; \ + rqst.flags = s.flags | SSAM_REQUEST_HAS_RESPONSE; \ + rqst.length = sizeof(atype); \ + rqst.payload = (u8 *)arg; \ + \ + rsp.capacity = sizeof(rtype); \ + rsp.length = 0; \ + rsp.pointer = (u8 *)ret; \ + \ + status = ssam_request_sync_onstack(ctrl, &rqst, &rsp, sizeof(atype)); \ + if (status) \ + return status; \ + \ + if (rsp.length != sizeof(rtype)) { \ + struct device *dev = ssam_controller_device(ctrl); \ + dev_err(dev, \ + "rqst: invalid response length, expected %zu, got %zu (tc: %#04x, cid: %#04x)", \ + sizeof(rtype), rsp.length, rqst.target_category,\ + rqst.command_id); \ + return -EIO; \ + } \ + \ + return 0; \ + } + /* -- Event notifier/callbacks. --------------------------------------------- */ @@ -835,8 +960,28 @@ struct ssam_event_notifier { int ssam_notifier_register(struct ssam_controller *ctrl, struct ssam_event_notifier *n); -int ssam_notifier_unregister(struct ssam_controller *ctrl, - struct ssam_event_notifier *n); +int __ssam_notifier_unregister(struct ssam_controller *ctrl, + struct ssam_event_notifier *n, bool disable); + +/** + * ssam_notifier_unregister() - Unregister an event notifier. + * @ctrl: The controller the notifier has been registered on. + * @n: The event notifier to unregister. + * + * Unregister an event notifier. Decrement the usage counter of the associated + * SAM event if the notifier is not marked as an observer. If the usage counter + * reaches zero, the event will be disabled. + * + * Return: Returns zero on success, %-ENOENT if the given notifier block has + * not been registered on the controller. If the given notifier block was the + * last one associated with its specific event, returns the status of the + * event-disable EC-command. + */ +static inline int ssam_notifier_unregister(struct ssam_controller *ctrl, + struct ssam_event_notifier *n) +{ + return __ssam_notifier_unregister(ctrl, n, true); +} int ssam_controller_event_enable(struct ssam_controller *ctrl, struct ssam_event_registry reg, diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h index cc257097eb05..46c45d1b6368 100644 --- a/include/linux/surface_aggregator/device.h +++ b/include/linux/surface_aggregator/device.h @@ -15,6 +15,7 @@ #include <linux/device.h> #include <linux/mod_devicetable.h> +#include <linux/property.h> #include <linux/types.h> #include <linux/surface_aggregator/controller.h> @@ -148,17 +149,30 @@ struct ssam_device_uid { #define SSAM_SDEV(cat, tid, iid, fun) \ SSAM_DEVICE(SSAM_DOMAIN_SERIALHUB, SSAM_SSH_TC_##cat, tid, iid, fun) +/* + * enum ssam_device_flags - Flags for SSAM client devices. + * @SSAM_DEVICE_HOT_REMOVED_BIT: + * The device has been hot-removed. Further communication with it may time + * out and should be avoided. + */ +enum ssam_device_flags { + SSAM_DEVICE_HOT_REMOVED_BIT = 0, +}; + /** * struct ssam_device - SSAM client device. - * @dev: Driver model representation of the device. - * @ctrl: SSAM controller managing this device. - * @uid: UID identifying the device. + * @dev: Driver model representation of the device. + * @ctrl: SSAM controller managing this device. + * @uid: UID identifying the device. + * @flags: Device state flags, see &enum ssam_device_flags. */ struct ssam_device { struct device dev; struct ssam_controller *ctrl; struct ssam_device_uid uid; + + unsigned long flags; }; /** @@ -177,6 +191,8 @@ struct ssam_device_driver { void (*remove)(struct ssam_device *sdev); }; +#ifdef CONFIG_SURFACE_AGGREGATOR_BUS + extern struct bus_type ssam_bus_type; extern const struct device_type ssam_device_type; @@ -193,6 +209,15 @@ static inline bool is_ssam_device(struct device *d) return d->type == &ssam_device_type; } +#else /* CONFIG_SURFACE_AGGREGATOR_BUS */ + +static inline bool is_ssam_device(struct device *d) +{ + return false; +} + +#endif /* CONFIG_SURFACE_AGGREGATOR_BUS */ + /** * to_ssam_device() - Casts the given device to a SSAM client device. * @d: The device to cast. @@ -241,6 +266,35 @@ int ssam_device_add(struct ssam_device *sdev); void ssam_device_remove(struct ssam_device *sdev); /** + * ssam_device_mark_hot_removed() - Mark the given device as hot-removed. + * @sdev: The device to mark as hot-removed. + * + * Mark the device as having been hot-removed. This signals drivers using the + * device that communication with the device should be avoided and may lead to + * timeouts. + */ +static inline void ssam_device_mark_hot_removed(struct ssam_device *sdev) +{ + dev_dbg(&sdev->dev, "marking device as hot-removed\n"); + set_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags); +} + +/** + * ssam_device_is_hot_removed() - Check if the given device has been + * hot-removed. + * @sdev: The device to check. + * + * Checks if the given device has been marked as hot-removed. See + * ssam_device_mark_hot_removed() for more details. + * + * Return: Returns ``true`` if the device has been marked as hot-removed. + */ +static inline bool ssam_device_is_hot_removed(struct ssam_device *sdev) +{ + return test_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags); +} + +/** * ssam_device_get() - Increment reference count of SSAM client device. * @sdev: The device to increment the reference count of. * @@ -322,11 +376,62 @@ void ssam_device_driver_unregister(struct ssam_device_driver *d); /* -- Helpers for controller and hub devices. ------------------------------- */ #ifdef CONFIG_SURFACE_AGGREGATOR_BUS + +int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl, + struct fwnode_handle *node); void ssam_remove_clients(struct device *dev); + #else /* CONFIG_SURFACE_AGGREGATOR_BUS */ + +static inline int __ssam_register_clients(struct device *parent, struct ssam_controller *ctrl, + struct fwnode_handle *node) +{ + return 0; +} + static inline void ssam_remove_clients(struct device *dev) {} + #endif /* CONFIG_SURFACE_AGGREGATOR_BUS */ +/** + * ssam_register_clients() - Register all client devices defined under the + * given parent device. + * @dev: The parent device under which clients should be registered. + * @ctrl: The controller with which client should be registered. + * + * Register all clients that have via firmware nodes been defined as children + * of the given (parent) device. The respective child firmware nodes will be + * associated with the correspondingly created child devices. + * + * The given controller will be used to instantiate the new devices. See + * ssam_device_add() for details. + * + * Return: Returns zero on success, nonzero on failure. + */ +static inline int ssam_register_clients(struct device *dev, struct ssam_controller *ctrl) +{ + return __ssam_register_clients(dev, ctrl, dev_fwnode(dev)); +} + +/** + * ssam_device_register_clients() - Register all client devices defined under + * the given SSAM parent device. + * @sdev: The parent device under which clients should be registered. + * + * Register all clients that have via firmware nodes been defined as children + * of the given (parent) device. The respective child firmware nodes will be + * associated with the correspondingly created child devices. + * + * The controller used by the parent device will be used to instantiate the new + * devices. See ssam_device_add() for details. + * + * Return: Returns zero on success, nonzero on failure. + */ +static inline int ssam_device_register_clients(struct ssam_device *sdev) +{ + return ssam_register_clients(&sdev->dev, sdev->ctrl); +} + /* -- Helpers for client-device requests. ----------------------------------- */ @@ -430,4 +535,106 @@ static inline void ssam_remove_clients(struct device *dev) {} sdev->uid.instance, ret); \ } +/** + * SSAM_DEFINE_SYNC_REQUEST_CL_WR() - Define synchronous client-device SAM + * request function with argument and return value. + * @name: Name of the generated function. + * @atype: Type of the request's argument. + * @rtype: Type of the request's return value. + * @spec: Specification (&struct ssam_request_spec_md) defining the request. + * + * Defines a function executing the synchronous SAM request specified by @spec, + * with the request taking an argument of type @atype and having a return value + * of type @rtype. Device specifying parameters are not hard-coded, but instead + * are provided via the client device, specifically its UID, supplied when + * calling this function. The generated function takes care of setting up the + * request struct, buffer allocation, as well as execution of the request + * itself, returning once the request has been fully completed. The required + * transport buffer will be allocated on the stack. + * + * The generated function is defined as ``static int name(struct ssam_device + * *sdev, const atype *arg, rtype *ret)``, returning the status of the request, + * which is zero on success and negative on failure. The ``sdev`` parameter + * specifies both the target device of the request and by association the + * controller via which the request is sent. The request's argument is + * specified via the ``arg`` pointer. The request's return value is written to + * the memory pointed to by the ``ret`` parameter. + * + * Refer to ssam_request_sync_onstack() for more details on the behavior of + * the generated function. + */ +#define SSAM_DEFINE_SYNC_REQUEST_CL_WR(name, atype, rtype, spec...) \ + SSAM_DEFINE_SYNC_REQUEST_MD_WR(__raw_##name, atype, rtype, spec) \ + static int name(struct ssam_device *sdev, const atype *arg, rtype *ret) \ + { \ + return __raw_##name(sdev->ctrl, sdev->uid.target, \ + sdev->uid.instance, arg, ret); \ + } + + +/* -- Helpers for client-device notifiers. ---------------------------------- */ + +/** + * ssam_device_notifier_register() - Register an event notifier for the + * specified client device. + * @sdev: The device the notifier should be registered on. + * @n: The event notifier to register. + * + * Register an event notifier. Increment the usage counter of the associated + * SAM event if the notifier is not marked as an observer. If the event is not + * marked as an observer and is currently not enabled, it will be enabled + * during this call. If the notifier is marked as an observer, no attempt will + * be made at enabling any event and no reference count will be modified. + * + * Notifiers marked as observers do not need to be associated with one specific + * event, i.e. as long as no event matching is performed, only the event target + * category needs to be set. + * + * Return: Returns zero on success, %-ENOSPC if there have already been + * %INT_MAX notifiers for the event ID/type associated with the notifier block + * registered, %-ENOMEM if the corresponding event entry could not be + * allocated, %-ENODEV if the device is marked as hot-removed. If this is the + * first time that a notifier block is registered for the specific associated + * event, returns the status of the event-enable EC-command. + */ +static inline int ssam_device_notifier_register(struct ssam_device *sdev, + struct ssam_event_notifier *n) +{ + /* + * Note that this check does not provide any guarantees whatsoever as + * hot-removal could happen at any point and we can't protect against + * it. Nevertheless, if we can detect hot-removal, bail early to avoid + * communication timeouts. + */ + if (ssam_device_is_hot_removed(sdev)) + return -ENODEV; + + return ssam_notifier_register(sdev->ctrl, n); +} + +/** + * ssam_device_notifier_unregister() - Unregister an event notifier for the + * specified client device. + * @sdev: The device the notifier has been registered on. + * @n: The event notifier to unregister. + * + * Unregister an event notifier. Decrement the usage counter of the associated + * SAM event if the notifier is not marked as an observer. If the usage counter + * reaches zero, the event will be disabled. + * + * In case the device has been marked as hot-removed, the event will not be + * disabled on the EC, as in those cases any attempt at doing so may time out. + * + * Return: Returns zero on success, %-ENOENT if the given notifier block has + * not been registered on the controller. If the given notifier block was the + * last one associated with its specific event, returns the status of the + * event-disable EC-command. + */ +static inline int ssam_device_notifier_unregister(struct ssam_device *sdev, + struct ssam_event_notifier *n) +{ + return __ssam_notifier_unregister(sdev->ctrl, n, + !ssam_device_is_hot_removed(sdev)); +} + #endif /* _LINUX_SURFACE_AGGREGATOR_DEVICE_H */ diff --git a/include/linux/surface_aggregator/serial_hub.h b/include/linux/surface_aggregator/serial_hub.h index c3de43edcffa..45501b6e54e8 100644 --- a/include/linux/surface_aggregator/serial_hub.h +++ b/include/linux/surface_aggregator/serial_hub.h @@ -201,7 +201,7 @@ static inline u16 ssh_crc(const u8 *buf, size_t len) * exception of zero, which is not an event ID. Thus, this is also the * absolute maximum number of event handlers that can be registered. */ -#define SSH_NUM_EVENTS 34 +#define SSH_NUM_EVENTS 38 /* * SSH_NUM_TARGETS - The number of communication targets used in the protocol. @@ -292,40 +292,45 @@ struct ssam_span { * Windows driver. */ enum ssam_ssh_tc { - /* Category 0x00 is invalid for EC use. */ - SSAM_SSH_TC_SAM = 0x01, /* Generic system functionality, real-time clock. */ - SSAM_SSH_TC_BAT = 0x02, /* Battery/power subsystem. */ - SSAM_SSH_TC_TMP = 0x03, /* Thermal subsystem. */ - SSAM_SSH_TC_PMC = 0x04, - SSAM_SSH_TC_FAN = 0x05, - SSAM_SSH_TC_PoM = 0x06, - SSAM_SSH_TC_DBG = 0x07, - SSAM_SSH_TC_KBD = 0x08, /* Legacy keyboard (Laptop 1/2). */ - SSAM_SSH_TC_FWU = 0x09, - SSAM_SSH_TC_UNI = 0x0a, - SSAM_SSH_TC_LPC = 0x0b, - SSAM_SSH_TC_TCL = 0x0c, - SSAM_SSH_TC_SFL = 0x0d, - SSAM_SSH_TC_KIP = 0x0e, - SSAM_SSH_TC_EXT = 0x0f, - SSAM_SSH_TC_BLD = 0x10, - SSAM_SSH_TC_BAS = 0x11, /* Detachment system (Surface Book 2/3). */ - SSAM_SSH_TC_SEN = 0x12, - SSAM_SSH_TC_SRQ = 0x13, - SSAM_SSH_TC_MCU = 0x14, - SSAM_SSH_TC_HID = 0x15, /* Generic HID input subsystem. */ - SSAM_SSH_TC_TCH = 0x16, - SSAM_SSH_TC_BKL = 0x17, - SSAM_SSH_TC_TAM = 0x18, - SSAM_SSH_TC_ACC = 0x19, - SSAM_SSH_TC_UFI = 0x1a, - SSAM_SSH_TC_USC = 0x1b, - SSAM_SSH_TC_PEN = 0x1c, - SSAM_SSH_TC_VID = 0x1d, - SSAM_SSH_TC_AUD = 0x1e, - SSAM_SSH_TC_SMC = 0x1f, - SSAM_SSH_TC_KPD = 0x20, - SSAM_SSH_TC_REG = 0x21, /* Extended event registry. */ + /* Category 0x00 is invalid for EC use. */ + SSAM_SSH_TC_SAM = 0x01, /* Generic system functionality, real-time clock. */ + SSAM_SSH_TC_BAT = 0x02, /* Battery/power subsystem. */ + SSAM_SSH_TC_TMP = 0x03, /* Thermal subsystem. */ + SSAM_SSH_TC_PMC = 0x04, + SSAM_SSH_TC_FAN = 0x05, + SSAM_SSH_TC_PoM = 0x06, + SSAM_SSH_TC_DBG = 0x07, + SSAM_SSH_TC_KBD = 0x08, /* Legacy keyboard (Laptop 1/2). */ + SSAM_SSH_TC_FWU = 0x09, + SSAM_SSH_TC_UNI = 0x0a, + SSAM_SSH_TC_LPC = 0x0b, + SSAM_SSH_TC_TCL = 0x0c, + SSAM_SSH_TC_SFL = 0x0d, + SSAM_SSH_TC_KIP = 0x0e, /* Manages detachable peripherals (Pro X/8 keyboard cover) */ + SSAM_SSH_TC_EXT = 0x0f, + SSAM_SSH_TC_BLD = 0x10, + SSAM_SSH_TC_BAS = 0x11, /* Detachment system (Surface Book 2/3). */ + SSAM_SSH_TC_SEN = 0x12, + SSAM_SSH_TC_SRQ = 0x13, + SSAM_SSH_TC_MCU = 0x14, + SSAM_SSH_TC_HID = 0x15, /* Generic HID input subsystem. */ + SSAM_SSH_TC_TCH = 0x16, + SSAM_SSH_TC_BKL = 0x17, + SSAM_SSH_TC_TAM = 0x18, + SSAM_SSH_TC_ACC0 = 0x19, + SSAM_SSH_TC_UFI = 0x1a, + SSAM_SSH_TC_USC = 0x1b, + SSAM_SSH_TC_PEN = 0x1c, + SSAM_SSH_TC_VID = 0x1d, + SSAM_SSH_TC_AUD = 0x1e, + SSAM_SSH_TC_SMC = 0x1f, + SSAM_SSH_TC_KPD = 0x20, + SSAM_SSH_TC_REG = 0x21, /* Extended event registry. */ + SSAM_SSH_TC_SPT = 0x22, + SSAM_SSH_TC_SYS = 0x23, + SSAM_SSH_TC_ACC1 = 0x24, + SSAM_SSH_TC_SHB = 0x25, + SSAM_SSH_TC_POS = 0x26, /* For obtaining Laptop Studio screen position. */ }; |