diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/ath9k_platform.h | 2 | ||||
| -rw-r--r-- | include/linux/ssb/ssb_driver_chipcommon.h | 11 | ||||
| -rw-r--r-- | include/linux/ssb/ssb_regs.h | 2 | ||||
| -rw-r--r-- | include/linux/wl12xx.h | 29 |
4 files changed, 36 insertions, 8 deletions
diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h index 020387a114e3..60a7c49dcb49 100644 --- a/include/linux/ath9k_platform.h +++ b/include/linux/ath9k_platform.h @@ -28,6 +28,8 @@ struct ath9k_platform_data { int led_pin; u32 gpio_mask; u32 gpio_val; + + bool is_clk_25mhz; }; #endif /* _LINUX_ATH9K_PLATFORM_H */ diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index 2cdf249b4e5f..a08d693d8324 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -123,6 +123,8 @@ #define SSB_CHIPCO_FLASHDATA 0x0048 #define SSB_CHIPCO_BCAST_ADDR 0x0050 #define SSB_CHIPCO_BCAST_DATA 0x0054 +#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */ +#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ #define SSB_CHIPCO_GPIOIN 0x0060 #define SSB_CHIPCO_GPIOOUT 0x0064 #define SSB_CHIPCO_GPIOOUTEN 0x0068 @@ -131,6 +133,9 @@ #define SSB_CHIPCO_GPIOIRQ 0x0074 #define SSB_CHIPCO_WATCHDOG 0x0080 #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ +#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF +#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0 +#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000 #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16 #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ #define SSB_CHIPCO_CLOCK_N 0x0090 @@ -189,8 +194,10 @@ #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ -#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */ -#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */ +#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ +#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */ +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ +#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 402955ae48ce..efbf459d571c 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -97,7 +97,7 @@ #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ #define SSB_TMSLOW 0x0F98 /* SB Target State Low */ #define SSB_TMSLOW_RESET 0x00000001 /* Reset */ -#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ +#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h index bebb8efea0a6..4b697395326e 100644 --- a/include/linux/wl12xx.h +++ b/include/linux/wl12xx.h @@ -24,12 +24,26 @@ #ifndef _LINUX_WL12XX_H #define _LINUX_WL12XX_H -/* The board reference clock values */ +/* Reference clock values */ enum { - WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ - WL12XX_REFCLOCK_26 = 1, /* 26 MHz */ - WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */ - WL12XX_REFCLOCK_54 = 3, /* 54 MHz */ + WL12XX_REFCLOCK_19 = 0, /* 19.2 MHz */ + WL12XX_REFCLOCK_26 = 1, /* 26 MHz */ + WL12XX_REFCLOCK_38 = 2, /* 38.4 MHz */ + WL12XX_REFCLOCK_52 = 3, /* 52 MHz */ + WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */ + WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */ +}; + +/* TCXO clock values */ +enum { + WL12XX_TCXOCLOCK_19_2 = 0, /* 19.2MHz */ + WL12XX_TCXOCLOCK_26 = 1, /* 26 MHz */ + WL12XX_TCXOCLOCK_38_4 = 2, /* 38.4MHz */ + WL12XX_TCXOCLOCK_52 = 3, /* 52 MHz */ + WL12XX_TCXOCLOCK_16_368 = 4, /* 16.368 MHz */ + WL12XX_TCXOCLOCK_32_736 = 5, /* 32.736 MHz */ + WL12XX_TCXOCLOCK_16_8 = 6, /* 16.8 MHz */ + WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */ }; struct wl12xx_platform_data { @@ -38,8 +52,13 @@ struct wl12xx_platform_data { int irq; bool use_eeprom; int board_ref_clock; + int board_tcxo_clock; + unsigned long platform_quirks; }; +/* Platform does not support level trigger interrupts */ +#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ BIT(0) + #ifdef CONFIG_WL12XX_PLATFORM_DATA int wl12xx_set_platform_data(const struct wl12xx_platform_data *data); |