diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/bcma/bcma.h | 55 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_driver_chipcommon.h | 6 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_regs.h | 1 | ||||
| -rw-r--r-- | include/linux/hardirq.h | 2 | ||||
| -rw-r--r-- | include/linux/netfilter/ipset/ip_set_ahash.h | 4 | ||||
| -rw-r--r-- | include/linux/platform_data/brcmfmac-sdio.h | 124 | ||||
| -rw-r--r-- | include/linux/smpboot.h | 4 | ||||
| -rw-r--r-- | include/linux/socket.h | 1 | ||||
| -rw-r--r-- | include/linux/ssb/ssb.h | 60 | ||||
| -rw-r--r-- | include/linux/ssb/ssb_regs.h | 10 |
10 files changed, 253 insertions, 14 deletions
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index e0ce311011c0..f14a98a79c9d 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -134,6 +134,7 @@ struct bcma_host_ops { #define BCMA_CORE_I2S 0x834 #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ +#define BCMA_CORE_ARM_CR4 0x83e #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 @@ -173,6 +174,60 @@ struct bcma_host_ops { #define BCMA_CHIP_ID_BCM53572 53572 #define BCMA_PKG_ID_BCM47188 9 +/* Board types (on PCI usually equals to the subsystem dev id) */ +/* BCM4313 */ +#define BCMA_BOARD_TYPE_BCM94313BU 0X050F +#define BCMA_BOARD_TYPE_BCM94313HM 0X0510 +#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511 +#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C +/* BCM4716 */ +#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD +/* BCM43224 */ +#define BCMA_BOARD_TYPE_BCM943224X21 0X056E +#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1 +#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9 +#define BCMA_BOARD_TYPE_BCM943224M93 0X008B +#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090 +#define BCMA_BOARD_TYPE_BCM943224X16 0X0093 +#define BCMA_BOARD_TYPE_BCM94322X9 0X008D +#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E +/* BCM43228 */ +#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540 +#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541 +#define BCMA_BOARD_TYPE_BCM943228BU 0X0542 +#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543 +#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544 +#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545 +#define BCMA_BOARD_TYPE_BCM943228SD 0X0573 +/* BCM4331 */ +#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6 +#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4 +#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E +#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4 +#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC +#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED +#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF +#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF +#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5 +#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4 +#define BCMA_BOARD_TYPE_BCM94331BU 0X0523 +#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524 +#define BCMA_BOARD_TYPE_BCM94331MC 0X0525 +#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526 +#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527 +#define BCMA_BOARD_TYPE_BCM94331HM 0X0574 +#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B +#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9 +#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6 +#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA +/* BCM53572 */ +#define BCMA_BOARD_TYPE_BCM953572BU 0X058D +#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E +#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F +#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590 +/* BCM43142 */ +#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0 + struct bcma_device { struct bcma_bus *bus; struct bcma_device_id id; diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 8390c474f69a..b8b09eac60a4 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -104,6 +104,7 @@ #define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */ #define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */ #define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */ +#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001 #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -315,6 +316,9 @@ #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 +#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ +#define BCMA_CC_PMU_CTL_RES_SHIFT 13 +#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ @@ -607,6 +611,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); +extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc); + void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask); diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index 7e8104bb7a7e..917dcd7965e7 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -37,6 +37,7 @@ #define BCMA_IOST_BIST_DONE 0x8000 #define BCMA_RESET_CTL 0x0800 #define BCMA_RESET_CTL_RESET 0x0001 +#define BCMA_RESET_ST 0x0804 /* BCMA PCI config space registers. */ #define BCMA_PCI_PMCSR 0x44 diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 29eb805ea4a6..c1d6555d2567 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -118,10 +118,8 @@ #ifdef CONFIG_PREEMPT_COUNT # define preemptible() (preempt_count() == 0 && !irqs_disabled()) -# define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1) #else # define preemptible() 0 -# define IRQ_EXIT_OFFSET HARDIRQ_OFFSET #endif #if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS) diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h index ef9acd3c8450..01d25e6fc792 100644 --- a/include/linux/netfilter/ipset/ip_set_ahash.h +++ b/include/linux/netfilter/ipset/ip_set_ahash.h @@ -854,6 +854,8 @@ type_pf_tresize(struct ip_set *set, bool retried) retry: ret = 0; htable_bits++; + pr_debug("attempt to resize set %s from %u to %u, t %p\n", + set->name, orig->htable_bits, htable_bits, orig); if (!htable_bits) { /* In case we have plenty of memory :-) */ pr_warning("Cannot increase the hashsize of set %s further\n", @@ -873,7 +875,7 @@ retry: data = ahash_tdata(n, j); m = hbucket(t, HKEY(data, h->initval, htable_bits)); ret = type_pf_elem_tadd(m, data, AHASH_MAX(h), 0, - type_pf_data_timeout(data)); + ip_set_timeout_get(type_pf_data_timeout(data))); if (ret < 0) { read_unlock_bh(&set->lock); ahash_destroy(t); diff --git a/include/linux/platform_data/brcmfmac-sdio.h b/include/linux/platform_data/brcmfmac-sdio.h new file mode 100644 index 000000000000..1ade657d5fc1 --- /dev/null +++ b/include/linux/platform_data/brcmfmac-sdio.h @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + * + * Use the platform data in the following (similar) way: + * + * +#include <brcmfmac_platform.h> + + +static void brcmfmac_power_on(void) +{ +} + +static void brcmfmac_power_off(void) +{ +} + +static void brcmfmac_reset(void) +{ +} + +static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { + .power_on = brcmfmac_power_on, + .power_off = brcmfmac_power_off, + .reset = brcmfmac_reset +}; + +static struct platform_device brcmfmac_device = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id = PLATFORM_DEVID_NONE, + .dev.platform_data = &brcmfmac_sdio_pdata +}; + +void __init brcmfmac_init_pdata(void) +{ + brcmfmac_sdio_pdata.oob_irq_supported = true; + brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); + brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHLEVEL; + platform_device_register(&brcmfmac_device); +} + * + * + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + * + * Explanation of the platform_data fields: + * + * drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is the target drive + * strength, the exact drive strength which will be used depends on the + * capabilities of the device. + * + * oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having less overhead on + * interrupt processing an out of band interrupt can be used. If the HW + * supports this then enable this by setting this field to true and configure + * the oob related fields. + * + * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are + * used for registering the irq using request_irq function. + * + * power_on: This function is called by the brcmfmac when the module gets + * loaded. This can be particularly useful for low power devices. The platform + * spcific routine may for example decide to power up the complete device. + * If there is no use-case for this function then provide NULL. + * + * power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the device can be powered down or otherwise be reset. + * So if an actual power_off is not supported but reset is then reset the device + * when this function gets called. This can be particularly useful for low power + * devices. If there is no use-case for this function (either power-down or + * reset) then provide NULL. + * + * reset: This function can get called if the device communication broke down. + * This functionality is particularly useful in case of SDIO type devices. It is + * possible to reset a dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module specific and this + * function should return only after the complete reset has completed. + */ + +#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" + +struct brcmfmac_sdio_platform_data { + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + void (*power_on)(void); + void (*power_off)(void); + void (*reset)(void); +}; + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ diff --git a/include/linux/smpboot.h b/include/linux/smpboot.h index c65dee059913..13e929679550 100644 --- a/include/linux/smpboot.h +++ b/include/linux/smpboot.h @@ -24,6 +24,9 @@ struct smpboot_thread_data; * parked (cpu offline) * @unpark: Optional unpark function, called when the thread is * unparked (cpu online) + * @pre_unpark: Optional unpark function, called before the thread is + * unparked (cpu online). This is not guaranteed to be + * called on the target cpu of the thread. Careful! * @selfparking: Thread is not parked by the park function. * @thread_comm: The base name of the thread */ @@ -37,6 +40,7 @@ struct smp_hotplug_thread { void (*cleanup)(unsigned int cpu, bool online); void (*park)(unsigned int cpu); void (*unpark)(unsigned int cpu); + void (*pre_unpark)(unsigned int cpu); bool selfparking; const char *thread_comm; }; diff --git a/include/linux/socket.h b/include/linux/socket.h index 2b9f74b0ffea..428c37a1f95c 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -298,6 +298,7 @@ struct ucred { #define SOL_IUCV 277 #define SOL_CAIF 278 #define SOL_ALG 279 +#define SOL_NFC 280 /* IPX options */ #define IPX_TYPE 1 diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 22958d68ecfe..c64999fd1660 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -26,9 +26,9 @@ struct ssb_sprom_core_pwr_info { struct ssb_sprom { u8 revision; - u8 il0mac[6]; /* MAC address for 802.11b/g */ - u8 et0mac[6]; /* MAC address for Ethernet */ - u8 et1mac[6]; /* MAC address for 802.11a */ + u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */ + u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */ + u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */ u8 et0phyaddr; /* MII address for enet0 */ u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ @@ -340,13 +340,61 @@ enum ssb_bustype { #define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */ #define SSB_BOARDVENDOR_HP 0x0E11 /* HP */ /* board_type */ +#define SSB_BOARD_BCM94301CB 0x0406 +#define SSB_BOARD_BCM94301MP 0x0407 +#define SSB_BOARD_BU4309 0x040A +#define SSB_BOARD_BCM94309CB 0x040B +#define SSB_BOARD_BCM4309MP 0x040C +#define SSB_BOARD_BU4306 0x0416 #define SSB_BOARD_BCM94306MP 0x0418 #define SSB_BOARD_BCM4309G 0x0421 #define SSB_BOARD_BCM4306CB 0x0417 -#define SSB_BOARD_BCM4309MP 0x040C +#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */ +#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */ +#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */ +#define SSB_BOARD_BU4704SD 0x042E /* with sdram */ +#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */ +#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */ +#define SSB_BOARD_BU4318 0x0447 +#define SSB_BOARD_CB4318 0x0448 +#define SSB_BOARD_MPG4318 0x0449 #define SSB_BOARD_MP4318 0x044A -#define SSB_BOARD_BU4306 0x0416 -#define SSB_BOARD_BU4309 0x040A +#define SSB_BOARD_SD4318 0x044B +#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */ +#define SSB_BOARD_BCM94303MP 0x044E +#define SSB_BOARD_BCM94306MPM 0x0450 +#define SSB_BOARD_BCM94306MPL 0x0453 +#define SSB_BOARD_PC4303 0x0454 /* pcmcia */ +#define SSB_BOARD_BCM94306MPLNA 0x0457 +#define SSB_BOARD_BCM94306MPH 0x045B +#define SSB_BOARD_BCM94306PCIV 0x045C +#define SSB_BOARD_BCM94318MPGH 0x0463 +#define SSB_BOARD_BU4311 0x0464 +#define SSB_BOARD_BCM94311MC 0x0465 +#define SSB_BOARD_BCM94311MCAG 0x0466 +/* 4321 boards */ +#define SSB_BOARD_BU4321 0x046B +#define SSB_BOARD_BU4321E 0x047C +#define SSB_BOARD_MP4321 0x046C +#define SSB_BOARD_CB2_4321 0x046D +#define SSB_BOARD_CB2_4321_AG 0x0066 +#define SSB_BOARD_MC4321 0x046E +/* 4325 boards */ +#define SSB_BOARD_BCM94325DEVBU 0x0490 +#define SSB_BOARD_BCM94325BGABU 0x0491 +#define SSB_BOARD_BCM94325SDGWB 0x0492 +#define SSB_BOARD_BCM94325SDGMDL 0x04AA +#define SSB_BOARD_BCM94325SDGMDL2 0x04C6 +#define SSB_BOARD_BCM94325SDGMDL3 0x04C9 +#define SSB_BOARD_BCM94325SDABGWBA 0x04E1 +/* 4322 boards */ +#define SSB_BOARD_BCM94322MC 0x04A4 +#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */ +#define SSB_BOARD_BCM94322HM 0x04B0 +#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */ +/* 4312 boards */ +#define SSB_BOARD_BU4312 0x048A +#define SSB_BOARD_BCM4312MCGSG 0x04B5 /* chip_package */ #define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */ #define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 6ecfa02ddbac..3a7256955b10 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -289,11 +289,11 @@ #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ -#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ -#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ -#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 -#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ -#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 +#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */ +#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0 +#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8 #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ #define SSB_SPROM4_AGAIN0_SHIFT 0 |