diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/phy/phy-dp.h | 95 | ||||
| -rw-r--r-- | include/linux/phy/phy.h | 14 | ||||
| -rw-r--r-- | include/linux/platform_data/ehci-sh.h | 16 | ||||
| -rw-r--r-- | include/linux/platform_data/mv_usb.h | 8 | ||||
| -rw-r--r-- | include/linux/platform_data/usb3503.h | 3 | ||||
| -rw-r--r-- | include/linux/usb/gpio_vbus.h | 33 | ||||
| -rw-r--r-- | include/linux/usb/irda.h | 13 | ||||
| -rw-r--r-- | include/linux/usb/pd.h | 33 | ||||
| -rw-r--r-- | include/linux/usb/pd_vdo.h | 32 | ||||
| -rw-r--r-- | include/linux/usb/renesas_usbhs.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/tegra_usb_phy.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/typec.h | 9 | ||||
| -rw-r--r-- | include/linux/usb/typec_altmode.h | 20 | ||||
| -rw-r--r-- | include/linux/usb/typec_mux.h | 10 | ||||
| -rw-r--r-- | include/linux/usb/ulpi.h | 11 | ||||
| -rw-r--r-- | include/linux/usb/usb_phy_generic.h | 12 |
16 files changed, 233 insertions, 82 deletions
diff --git a/include/linux/phy/phy-dp.h b/include/linux/phy/phy-dp.h new file mode 100644 index 000000000000..18cad23642cd --- /dev/null +++ b/include/linux/phy/phy-dp.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 Cadence Design Systems Inc. + */ + +#ifndef __PHY_DP_H_ +#define __PHY_DP_H_ + +#include <linux/types.h> + +/** + * struct phy_configure_opts_dp - DisplayPort PHY configuration set + * + * This structure is used to represent the configuration state of a + * DisplayPort phy. + */ +struct phy_configure_opts_dp { + /** + * @link_rate: + * + * Link Rate, in Mb/s, of the main link. + * + * Allowed values: 1620, 2160, 2430, 2700, 3240, 4320, 5400, 8100 Mb/s + */ + unsigned int link_rate; + + /** + * @lanes: + * + * Number of active, consecutive, data lanes, starting from + * lane 0, used for the transmissions on main link. + * + * Allowed values: 1, 2, 4 + */ + unsigned int lanes; + + /** + * @voltage: + * + * Voltage swing levels, as specified by DisplayPort specification, + * to be used by particular lanes. One value per lane. + * voltage[0] is for lane 0, voltage[1] is for lane 1, etc. + * + * Maximum value: 3 + */ + unsigned int voltage[4]; + + /** + * @pre: + * + * Pre-emphasis levels, as specified by DisplayPort specification, to be + * used by particular lanes. One value per lane. + * + * Maximum value: 3 + */ + unsigned int pre[4]; + + /** + * @ssc: + * + * Flag indicating, whether or not to enable spread-spectrum clocking. + * + */ + u8 ssc : 1; + + /** + * @set_rate: + * + * Flag indicating, whether or not reconfigure link rate and SSC to + * requested values. + * + */ + u8 set_rate : 1; + + /** + * @set_lanes: + * + * Flag indicating, whether or not reconfigure lane count to + * requested value. + * + */ + u8 set_lanes : 1; + + /** + * @set_voltages: + * + * Flag indicating, whether or not reconfigure voltage swing + * and pre-emphasis to requested values. Only lanes specified + * by "lanes" parameter will be affected. + * + */ + u8 set_voltages : 1; +}; + +#endif /* __PHY_DP_H_ */ diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index 56d3a100006a..bcee8eba62b3 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -16,6 +16,7 @@ #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> +#include <linux/phy/phy-dp.h> #include <linux/phy/phy-mipi-dphy.h> struct phy; @@ -40,6 +41,7 @@ enum phy_mode { PHY_MODE_MIPI_DPHY, PHY_MODE_SATA, PHY_MODE_LVDS, + PHY_MODE_DP }; /** @@ -47,9 +49,12 @@ enum phy_mode { * * @mipi_dphy: Configuration set applicable for phys supporting * the MIPI_DPHY phy mode. + * @dp: Configuration set applicable for phys supporting + * the DisplayPort protocol. */ union phy_configure_opts { struct phy_configure_opts_mipi_dphy mipi_dphy; + struct phy_configure_opts_dp dp; }; /** @@ -234,7 +239,8 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, const char *con_id); struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, int index); -void phy_put(struct phy *phy); +void of_phy_put(struct phy *phy); +void phy_put(struct device *dev, struct phy *phy); void devm_phy_put(struct device *dev, struct phy *phy); struct phy *of_phy_get(struct device_node *np, const char *con_id); struct phy *of_phy_simple_xlate(struct device *dev, @@ -419,7 +425,11 @@ static inline struct phy *devm_of_phy_get_by_index(struct device *dev, return ERR_PTR(-ENOSYS); } -static inline void phy_put(struct phy *phy) +static inline void of_phy_put(struct phy *phy) +{ +} + +static inline void phy_put(struct device *dev, struct phy *phy) { } diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h deleted file mode 100644 index 219bd79dabfc..000000000000 --- a/include/linux/platform_data/ehci-sh.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * EHCI SuperH driver platform data - * - * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> - * Copyright (C) 2012 Renesas Solutions Corp. - */ - -#ifndef __USB_EHCI_SH_H -#define __USB_EHCI_SH_H - -struct ehci_sh_platdata { - void (*phy_init)(void); /* Phy init function */ -}; - -#endif /* __USB_EHCI_SH_H */ diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h index 5376b6d799d5..20d239c02bf3 100644 --- a/include/linux/platform_data/mv_usb.h +++ b/include/linux/platform_data/mv_usb.h @@ -6,14 +6,6 @@ #ifndef __MV_PLATFORM_USB_H #define __MV_PLATFORM_USB_H -enum pxa_ehci_type { - EHCI_UNDEFINED = 0, - PXA_U2OEHCI, /* pxa 168, 9xx */ - PXA_SPH, /* pxa 168, 9xx SPH */ - MMP3_HSIC, /* mmp3 hsic */ - MMP3_FSIC, /* mmp3 fsic */ -}; - enum { MV_USB_MODE_OTG, MV_USB_MODE_HOST, diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h index e049d51c1353..d01ef97ddf36 100644 --- a/include/linux/platform_data/usb3503.h +++ b/include/linux/platform_data/usb3503.h @@ -17,9 +17,6 @@ enum usb3503_mode { struct usb3503_platform_data { enum usb3503_mode initial_mode; u8 port_off_mask; - int gpio_intn; - int gpio_connect; - int gpio_reset; }; #endif diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h deleted file mode 100644 index 804fb06cf6d6..000000000000 --- a/include/linux/usb/gpio_vbus.h +++ /dev/null @@ -1,33 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * A simple GPIO VBUS sensing driver for B peripheral only devices - * with internal transceivers. - * Optionally D+ pullup can be controlled by a second GPIO. - * - * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/** - * struct gpio_vbus_mach_info - configuration for gpio_vbus - * @gpio_vbus: VBUS sensing GPIO - * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid) - * @gpio_vbus_inverted: true if gpio_vbus is active low - * @gpio_pullup_inverted: true if gpio_pullup is active low - * @wakeup: configure gpio_vbus as a wake-up source - * - * The VBUS sensing GPIO should have a pulldown, which will normally be - * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a - * value the GPIO detects as active. Some systems will use comparators. - */ -struct gpio_vbus_mach_info { - int gpio_vbus; - int gpio_pullup; - bool gpio_vbus_inverted; - bool gpio_pullup_inverted; - bool wakeup; -}; diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h index 396d2b043e64..556a801efce3 100644 --- a/include/linux/usb/irda.h +++ b/include/linux/usb/irda.h @@ -119,11 +119,22 @@ struct usb_irda_cs_descriptor { * 6 - 115200 bps * 7 - 576000 bps * 8 - 1.152 Mbps - * 9 - 5 mbps + * 9 - 4 Mbps * 10..15 - Reserved */ #define USB_IRDA_STATUS_LINK_SPEED 0x0f +#define USB_IRDA_LS_NO_CHANGE 0 +#define USB_IRDA_LS_2400 1 +#define USB_IRDA_LS_9600 2 +#define USB_IRDA_LS_19200 3 +#define USB_IRDA_LS_38400 4 +#define USB_IRDA_LS_57600 5 +#define USB_IRDA_LS_115200 6 +#define USB_IRDA_LS_576000 7 +#define USB_IRDA_LS_1152000 8 +#define USB_IRDA_LS_4000000 9 + /* The following is a 4-bit value used only for * outbound header: * diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index 145c38e351c2..a665d7f21142 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -45,7 +45,8 @@ enum pd_data_msg_type { PD_DATA_BATT_STATUS = 5, PD_DATA_ALERT = 6, PD_DATA_GET_COUNTRY_INFO = 7, - /* 8-14 Reserved */ + PD_DATA_ENTER_USB = 8, + /* 9-14 Reserved */ PD_DATA_VENDOR_DEF = 15, /* 16-31 Reserved */ }; @@ -418,6 +419,36 @@ static inline unsigned int rdo_max_power(u32 rdo) return ((rdo >> RDO_BATT_MAX_PWR_SHIFT) & RDO_PWR_MASK) * 250; } +/* Enter_USB Data Object */ +#define EUDO_USB_MODE_MASK GENMASK(30, 28) +#define EUDO_USB_MODE_SHIFT 28 +#define EUDO_USB_MODE_USB2 0 +#define EUDO_USB_MODE_USB3 1 +#define EUDO_USB_MODE_USB4 2 +#define EUDO_USB4_DRD BIT(26) +#define EUDO_USB3_DRD BIT(25) +#define EUDO_CABLE_SPEED_MASK GENMASK(23, 21) +#define EUDO_CABLE_SPEED_SHIFT 21 +#define EUDO_CABLE_SPEED_USB2 0 +#define EUDO_CABLE_SPEED_USB3_GEN1 1 +#define EUDO_CABLE_SPEED_USB4_GEN2 2 +#define EUDO_CABLE_SPEED_USB4_GEN3 3 +#define EUDO_CABLE_TYPE_MASK GENMASK(20, 19) +#define EUDO_CABLE_TYPE_SHIFT 19 +#define EUDO_CABLE_TYPE_PASSIVE 0 +#define EUDO_CABLE_TYPE_RE_TIMER 1 +#define EUDO_CABLE_TYPE_RE_DRIVER 2 +#define EUDO_CABLE_TYPE_OPTICAL 3 +#define EUDO_CABLE_CURRENT_MASK GENMASK(18, 17) +#define EUDO_CABLE_CURRENT_SHIFT 17 +#define EUDO_CABLE_CURRENT_NOTSUPP 0 +#define EUDO_CABLE_CURRENT_3A 2 +#define EUDO_CABLE_CURRENT_5A 3 +#define EUDO_PCIE_SUPPORT BIT(16) +#define EUDO_DP_SUPPORT BIT(15) +#define EUDO_TBT_SUPPORT BIT(14) +#define EUDO_HOST_PRESENT BIT(13) + /* USB PD timers and counters */ #define PD_T_NO_RESPONSE 5000 /* 4.5 - 5.5 seconds */ #define PD_T_DB_DETECT 10000 /* 10 - 15 seconds */ diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h index 781f4e98dd23..35b8e15efaa0 100644 --- a/include/linux/usb/pd_vdo.h +++ b/include/linux/usb/pd_vdo.h @@ -140,6 +140,38 @@ #define PD_PRODUCT_PID(vdo) (((vdo) >> 16) & 0xffff) /* + * UFP VDO1 + * -------- + * <31:29> :: UFP VDO version + * <28> :: Reserved + * <27:24> :: Device capability + * <23:6> :: Reserved + * <5:3> :: Alternate modes + * <2:0> :: USB highest speed + */ +#define PD_VDO1_UFP_DEVCAP(vdo) (((vdo) & GENMASK(27, 24)) >> 24) + +#define DEV_USB2_CAPABLE BIT(0) +#define DEV_USB2_BILLBOARD BIT(1) +#define DEV_USB3_CAPABLE BIT(2) +#define DEV_USB4_CAPABLE BIT(3) + +/* + * DFP VDO + * -------- + * <31:29> :: DFP VDO version + * <28:27> :: Reserved + * <26:24> :: Host capability + * <23:5> :: Reserved + * <4:0> :: Port number + */ +#define PD_VDO_DFP_HOSTCAP(vdo) (((vdo) & GENMASK(26, 24)) >> 24) + +#define HOST_USB2_CAPABLE BIT(0) +#define HOST_USB3_CAPABLE BIT(1) +#define HOST_USB4_CAPABLE BIT(2) + +/* * Cable VDO * --------- * <31:28> :: Cable HW version diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 6914475bbc86..d418c55523a7 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -170,8 +170,6 @@ struct renesas_usbhs_driver_param { */ int pio_dma_border; /* default is 64byte */ - u32 enable_gpio; - /* * option: */ diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index 0c5c3ea8b2d7..c29d1b4c9381 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -17,6 +17,7 @@ #define __TEGRA_USB_PHY_H #include <linux/clk.h> +#include <linux/gpio.h> #include <linux/reset.h> #include <linux/usb/otg.h> @@ -76,8 +77,9 @@ struct tegra_usb_phy { struct usb_phy u_phy; bool is_legacy_phy; bool is_ulpi_phy; - int reset_gpio; + struct gpio_desc *reset_gpio; struct reset_control *pad_rst; + bool powered_on; }; void tegra_usb_phy_preresume(struct usb_phy *phy); diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index 0f52723a11bd..c358b3fd05c9 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -9,6 +9,9 @@ #define USB_TYPEC_REV_1_0 0x100 /* 1.0 */ #define USB_TYPEC_REV_1_1 0x110 /* 1.1 */ #define USB_TYPEC_REV_1_2 0x120 /* 1.2 */ +#define USB_TYPEC_REV_1_3 0x130 /* 1.3 */ +#define USB_TYPEC_REV_1_4 0x140 /* 1.4 */ +#define USB_TYPEC_REV_2_0 0x200 /* 2.0 */ struct typec_partner; struct typec_cable; @@ -74,6 +77,7 @@ enum typec_orientation { * @id_header: ID Header VDO * @cert_stat: Cert Stat VDO * @product: Product VDO + * @vdo: Product Type Specific VDOs * * USB power delivery Discover Identity command response data. * @@ -84,6 +88,7 @@ struct usb_pd_identity { u32 id_header; u32 cert_stat; u32 product; + u32 vdo[3]; }; int typec_partner_set_identity(struct typec_partner *partner); @@ -230,6 +235,10 @@ struct typec_cable *typec_register_cable(struct typec_port *port, struct typec_cable_desc *desc); void typec_unregister_cable(struct typec_cable *cable); +struct typec_cable *typec_cable_get(struct typec_port *port); +void typec_cable_put(struct typec_cable *cable); +int typec_cable_is_active(struct typec_cable *cable); + struct typec_plug *typec_register_plug(struct typec_cable *cable, struct typec_plug_desc *desc); void typec_unregister_plug(struct typec_plug *plug); diff --git a/include/linux/usb/typec_altmode.h b/include/linux/usb/typec_altmode.h index 9a88c74a1d0d..923ff3af0628 100644 --- a/include/linux/usb/typec_altmode.h +++ b/include/linux/usb/typec_altmode.h @@ -55,7 +55,7 @@ static inline void *typec_altmode_get_drvdata(struct typec_altmode *altmode) * @activate: User callback for Enter/Exit Mode */ struct typec_altmode_ops { - int (*enter)(struct typec_altmode *altmode); + int (*enter)(struct typec_altmode *altmode, u32 *vdo); int (*exit)(struct typec_altmode *altmode); void (*attention)(struct typec_altmode *altmode, u32 vdo); int (*vdm)(struct typec_altmode *altmode, const u32 hdr, @@ -65,7 +65,7 @@ struct typec_altmode_ops { int (*activate)(struct typec_altmode *altmode, int activate); }; -int typec_altmode_enter(struct typec_altmode *altmode); +int typec_altmode_enter(struct typec_altmode *altmode, u32 *vdo); int typec_altmode_exit(struct typec_altmode *altmode); void typec_altmode_attention(struct typec_altmode *altmode, u32 vdo); int typec_altmode_vdm(struct typec_altmode *altmode, @@ -101,6 +101,22 @@ enum { TYPEC_MODE_DEBUG, /* Debug Accessory */ }; +/* + * USB4 also requires that the pins on the connector are repurposed, just like + * Alternate Modes. USB4 mode is however not entered with the Enter Mode Command + * like the Alternate Modes are, but instead with a special Enter_USB Message. + * The Enter_USB Message can also be used for setting to connector to operate in + * USB 3.2 or in USB 2.0 mode instead of USB4. + * + * The Enter_USB specific "USB Modes" are also supplied here as special modal + * state values, just like the Accessory Modes. + */ +enum { + TYPEC_MODE_USB2 = TYPEC_MODE_DEBUG, /* USB 2.0 mode */ + TYPEC_MODE_USB3, /* USB 3.2 mode */ + TYPEC_MODE_USB4 /* USB4 mode */ +}; + #define TYPEC_MODAL_STATE(_state_) ((_state_) + TYPEC_STATE_MODAL) struct typec_altmode *typec_altmode_get_plug(struct typec_altmode *altmode, diff --git a/include/linux/usb/typec_mux.h b/include/linux/usb/typec_mux.h index 873ace5b0cf8..be7292c0be5e 100644 --- a/include/linux/usb/typec_mux.h +++ b/include/linux/usb/typec_mux.h @@ -8,6 +8,7 @@ struct device; struct typec_mux; struct typec_switch; +struct typec_altmode; struct fwnode_handle; typedef int (*typec_switch_set_fn_t)(struct typec_switch *sw, @@ -29,7 +30,14 @@ void typec_switch_unregister(struct typec_switch *sw); void typec_switch_set_drvdata(struct typec_switch *sw, void *data); void *typec_switch_get_drvdata(struct typec_switch *sw); -typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux, int state); +struct typec_mux_state { + struct typec_altmode *alt; + unsigned long mode; + void *data; +}; + +typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux, + struct typec_mux_state *state); struct typec_mux_desc { struct fwnode_handle *fwnode; diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h index c515765adab7..36c2982780ad 100644 --- a/include/linux/usb/ulpi.h +++ b/include/linux/usb/ulpi.h @@ -55,12 +55,23 @@ #if IS_ENABLED(CONFIG_USB_ULPI) struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags); + +struct usb_phy *devm_otg_ulpi_create(struct device *dev, + struct usb_phy_io_ops *ops, + unsigned int flags); #else static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops, unsigned int flags) { return NULL; } + +static inline struct usb_phy *devm_otg_ulpi_create(struct device *dev, + struct usb_phy_io_ops *ops, + unsigned int flags) +{ + return NULL; +} #endif #ifdef CONFIG_USB_ULPI_VIEWPORT diff --git a/include/linux/usb/usb_phy_generic.h b/include/linux/usb/usb_phy_generic.h index 7408cf52c710..cd9e70a552a0 100644 --- a/include/linux/usb/usb_phy_generic.h +++ b/include/linux/usb/usb_phy_generic.h @@ -3,18 +3,6 @@ #define __LINUX_USB_NOP_XCEIV_H #include <linux/usb/otg.h> -#include <linux/gpio/consumer.h> - -struct usb_phy_generic_platform_data { - enum usb_phy_type type; - unsigned long clk_rate; - - /* if set fails with -EPROBE_DEFER if can't get regulator */ - unsigned int needs_vcc:1; - unsigned int needs_reset:1; /* deprecated */ - int gpio_reset; - struct gpio_desc *gpiod_vbus; -}; #if IS_ENABLED(CONFIG_NOP_USB_XCEIV) /* sometimes transceivers are accessed only through e.g. ULPI */ |