diff options
Diffstat (limited to 'include/uapi')
66 files changed, 2095 insertions, 147 deletions
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h index 3a3201e4618e..f4a01305d9a6 100644 --- a/include/uapi/asm-generic/unistd.h +++ b/include/uapi/asm-generic/unistd.h @@ -855,9 +855,11 @@ __SYSCALL(__NR_clone3, sys_clone3) __SYSCALL(__NR_openat2, sys_openat2) #define __NR_pidfd_getfd 438 __SYSCALL(__NR_pidfd_getfd, sys_pidfd_getfd) +#define __NR_faccessat2 439 +__SYSCALL(__NR_faccessat2, sys_faccessat2) #undef __NR_syscalls -#define __NR_syscalls 439 +#define __NR_syscalls 440 /* * 32 bit systems traditionally used different diff --git a/include/uapi/drm/amdgpu_drm.h b/include/uapi/drm/amdgpu_drm.h index d28b4ce744d5..4e873dcbe68f 100644 --- a/include/uapi/drm/amdgpu_drm.h +++ b/include/uapi/drm/amdgpu_drm.h @@ -133,6 +133,11 @@ extern "C" { * releasing the memory */ #define AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE (1 << 9) +/* Flag that BO will be encrypted and that the TMZ bit should be + * set in the PTEs when mapping this buffer via GPUVM or + * accessing it with various hw blocks + */ +#define AMDGPU_GEM_CREATE_ENCRYPTED (1 << 10) struct drm_amdgpu_gem_create_in { /** the requested memory size */ @@ -559,7 +564,7 @@ struct drm_amdgpu_cs_in { /** Handle of resource list associated with CS */ __u32 bo_list_handle; __u32 num_chunks; - __u32 _pad; + __u32 flags; /** this points to __u64 * which point to cs chunks */ __u64 chunks; }; @@ -593,6 +598,14 @@ union drm_amdgpu_cs { */ #define AMDGPU_IB_FLAG_RESET_GDS_MAX_WAVE_ID (1 << 4) +/* Flag the IB as secure (TMZ) + */ +#define AMDGPU_IB_FLAGS_SECURE (1 << 5) + +/* Tell KMD to flush and invalidate caches + */ +#define AMDGPU_IB_FLAG_EMIT_MEM_SYNC (1 << 6) + struct drm_amdgpu_cs_chunk_ib { __u32 _pad; /** AMDGPU_IB_FLAG_* */ diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h index 8bc0b31597d8..490143500a50 100644 --- a/include/uapi/drm/drm_fourcc.h +++ b/include/uapi/drm/drm_fourcc.h @@ -354,9 +354,12 @@ extern "C" { * a platform-dependent stride. On top of that the memory can apply * platform-depending swizzling of some higher address bits into bit6. * - * This format is highly platforms specific and not useful for cross-driver - * sharing. It exists since on a given platform it does uniquely identify the - * layout in a simple way for i915-specific userspace. + * Note that this layout is only accurate on intel gen 8+ or valleyview chipsets. + * On earlier platforms the is highly platforms specific and not useful for + * cross-driver sharing. It exists since on a given platform it does uniquely + * identify the layout in a simple way for i915-specific userspace, which + * facilitated conversion of userspace to modifiers. Additionally the exact + * format on some really old platforms is not known. */ #define I915_FORMAT_MOD_X_TILED fourcc_mod_code(INTEL, 1) @@ -369,9 +372,12 @@ extern "C" { * memory can apply platform-depending swizzling of some higher address bits * into bit6. * - * This format is highly platforms specific and not useful for cross-driver - * sharing. It exists since on a given platform it does uniquely identify the - * layout in a simple way for i915-specific userspace. + * Note that this layout is only accurate on intel gen 8+ or valleyview chipsets. + * On earlier platforms the is highly platforms specific and not useful for + * cross-driver sharing. It exists since on a given platform it does uniquely + * identify the layout in a simple way for i915-specific userspace, which + * facilitated conversion of userspace to modifiers. Additionally the exact + * format on some really old platforms is not known. */ #define I915_FORMAT_MOD_Y_TILED fourcc_mod_code(INTEL, 2) @@ -521,7 +527,113 @@ extern "C" { #define DRM_FORMAT_MOD_NVIDIA_TEGRA_TILED fourcc_mod_code(NVIDIA, 1) /* - * 16Bx2 Block Linear layout, used by desktop GPUs, and Tegra K1 and later + * Generalized Block Linear layout, used by desktop GPUs starting with NV50/G80, + * and Tegra GPUs starting with Tegra K1. + * + * Pixels are arranged in Groups of Bytes (GOBs). GOB size and layout varies + * based on the architecture generation. GOBs themselves are then arranged in + * 3D blocks, with the block dimensions (in terms of GOBs) always being a power + * of two, and hence expressible as their log2 equivalent (E.g., "2" represents + * a block depth or height of "4"). + * + * Chapter 20 "Pixel Memory Formats" of the Tegra X1 TRM describes this format + * in full detail. + * + * Macro + * Bits Param Description + * ---- ----- ----------------------------------------------------------------- + * + * 3:0 h log2(height) of each block, in GOBs. Placed here for + * compatibility with the existing + * DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()-based modifiers. + * + * 4:4 - Must be 1, to indicate block-linear layout. Necessary for + * compatibility with the existing + * DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()-based modifiers. + * + * 8:5 - Reserved (To support 3D-surfaces with variable log2(depth) block + * size). Must be zero. + * + * Note there is no log2(width) parameter. Some portions of the + * hardware support a block width of two gobs, but it is impractical + * to use due to lack of support elsewhere, and has no known + * benefits. + * + * 11:9 - Reserved (To support 2D-array textures with variable array stride + * in blocks, specified via log2(tile width in blocks)). Must be + * zero. + * + * 19:12 k Page Kind. This value directly maps to a field in the page + * tables of all GPUs >= NV50. It affects the exact layout of bits + * in memory and can be derived from the tuple + * + * (format, GPU model, compression type, samples per pixel) + * + * Where compression type is defined below. If GPU model were + * implied by the format modifier, format, or memory buffer, page + * kind would not need to be included in the modifier itself, but + * since the modifier should define the layout of the associated + * memory buffer independent from any device or other context, it + * must be included here. + * + * 21:20 g GOB Height and Page Kind Generation. The height of a GOB changed + * starting with Fermi GPUs. Additionally, the mapping between page + * kind and bit layout has changed at various points. + * + * 0 = Gob Height 8, Fermi - Volta, Tegra K1+ Page Kind mapping + * 1 = Gob Height 4, G80 - GT2XX Page Kind mapping + * 2 = Gob Height 8, Turing+ Page Kind mapping + * 3 = Reserved for future use. + * + * 22:22 s Sector layout. On Tegra GPUs prior to Xavier, there is a further + * bit remapping step that occurs at an even lower level than the + * page kind and block linear swizzles. This causes the layout of + * surfaces mapped in those SOC's GPUs to be incompatible with the + * equivalent mapping on other GPUs in the same system. + * + * 0 = Tegra K1 - Tegra Parker/TX2 Layout. + * 1 = Desktop GPU and Tegra Xavier+ Layout + * + * 25:23 c Lossless Framebuffer Compression type. + * + * 0 = none + * 1 = ROP/3D, layout 1, exact compression format implied by Page + * Kind field + * 2 = ROP/3D, layout 2, exact compression format implied by Page + * Kind field + * 3 = CDE horizontal + * 4 = CDE vertical + * 5 = Reserved for future use + * 6 = Reserved for future use + * 7 = Reserved for future use + * + * 55:25 - Reserved for future use. Must be zero. + */ +#define DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D(c, s, g, k, h) \ + fourcc_mod_code(NVIDIA, (0x10 | \ + ((h) & 0xf) | \ + (((k) & 0xff) << 12) | \ + (((g) & 0x3) << 20) | \ + (((s) & 0x1) << 22) | \ + (((c) & 0x7) << 23))) + +/* To grandfather in prior block linear format modifiers to the above layout, + * the page kind "0", which corresponds to "pitch/linear" and hence is unusable + * with block-linear layouts, is remapped within drivers to the value 0xfe, + * which corresponds to the "generic" kind used for simple single-sample + * uncompressed color formats on Fermi - Volta GPUs. + */ +static inline __u64 +drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) +{ + if (!(modifier & 0x10) || (modifier & (0xff << 12))) + return modifier; + else + return modifier | (0xfe << 12); +} + +/* + * 16Bx2 Block Linear layout, used by Tegra K1 and later * * Pixels are arranged in 64x8 Groups Of Bytes (GOBs). GOBs are then stacked * vertically by a power of 2 (1 to 32 GOBs) to form a block. @@ -542,20 +654,20 @@ extern "C" { * in full detail. */ #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(v) \ - fourcc_mod_code(NVIDIA, 0x10 | ((v) & 0xf)) + DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D(0, 0, 0, 0, (v)) #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_ONE_GOB \ - fourcc_mod_code(NVIDIA, 0x10) + DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(0) #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_TWO_GOB \ - fourcc_mod_code(NVIDIA, 0x11) + DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(1) #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_FOUR_GOB \ - fourcc_mod_code(NVIDIA, 0x12) + DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(2) #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_EIGHT_GOB \ - fourcc_mod_code(NVIDIA, 0x13) + DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(3) #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_SIXTEEN_GOB \ - fourcc_mod_code(NVIDIA, 0x14) + DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(4) #define DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK_THIRTYTWO_GOB \ - fourcc_mod_code(NVIDIA, 0x15) + DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK(5) /* * Some Broadcom modifiers take parameters, for example the number of diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index 2813e579b480..14b67cd6b54b 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -1969,6 +1969,30 @@ enum drm_i915_perf_property_id { */ DRM_I915_PERF_PROP_HOLD_PREEMPTION, + /** + * Specifying this pins all contexts to the specified SSEU power + * configuration for the duration of the recording. + * + * This parameter's value is a pointer to a struct + * drm_i915_gem_context_param_sseu. + * + * This property is available in perf revision 4. + */ + DRM_I915_PERF_PROP_GLOBAL_SSEU, + + /** + * This optional parameter specifies the timer interval in nanoseconds + * at which the i915 driver will check the OA buffer for available data. + * Minimum allowed value is 100 microseconds. A default value is used by + * the driver if this parameter is not specified. Note that larger timer + * values will reduce cpu consumption during OA perf captures. However, + * excessively large values would potentially result in OA buffer + * overwrites as captures reach end of the OA buffer. + * + * This property is available in perf revision 5. + */ + DRM_I915_PERF_PROP_POLL_OA_PERIOD, + DRM_I915_PERF_PROP_MAX /* non-ABI */ }; diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index a534d71e689a..9b6a973f4cc3 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -117,6 +117,7 @@ #define AUDIT_TIME_INJOFFSET 1332 /* Timekeeping offset injected */ #define AUDIT_TIME_ADJNTPVAL 1333 /* NTP value adjustment */ #define AUDIT_BPF 1334 /* BPF subsystem */ +#define AUDIT_EVENT_LISTENER 1335 /* Task joined multicast read socket */ #define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ #define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index f9b7fdd951e4..c65b374a5090 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -113,6 +113,10 @@ enum bpf_cmd { BPF_MAP_DELETE_BATCH, BPF_LINK_CREATE, BPF_LINK_UPDATE, + BPF_LINK_GET_FD_BY_ID, + BPF_LINK_GET_NEXT_ID, + BPF_ENABLE_STATS, + BPF_ITER_CREATE, }; enum bpf_map_type { @@ -143,6 +147,7 @@ enum bpf_map_type { BPF_MAP_TYPE_SK_STORAGE, BPF_MAP_TYPE_DEVMAP_HASH, BPF_MAP_TYPE_STRUCT_OPS, + BPF_MAP_TYPE_RINGBUF, }; /* Note that tracing related programs such as @@ -215,11 +220,28 @@ enum bpf_attach_type { BPF_TRACE_FEXIT, BPF_MODIFY_RETURN, BPF_LSM_MAC, + BPF_TRACE_ITER, + BPF_CGROUP_INET4_GETPEERNAME, + BPF_CGROUP_INET6_GETPEERNAME, + BPF_CGROUP_INET4_GETSOCKNAME, + BPF_CGROUP_INET6_GETSOCKNAME, + BPF_XDP_DEVMAP, __MAX_BPF_ATTACH_TYPE }; #define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE +enum bpf_link_type { + BPF_LINK_TYPE_UNSPEC = 0, + BPF_LINK_TYPE_RAW_TRACEPOINT = 1, + BPF_LINK_TYPE_TRACING = 2, + BPF_LINK_TYPE_CGROUP = 3, + BPF_LINK_TYPE_ITER = 4, + BPF_LINK_TYPE_NETNS = 5, + + MAX_BPF_LINK_TYPE, +}; + /* cgroup-bpf attach flags used in BPF_PROG_ATTACH command * * NONE(default): No further bpf programs allowed in the subtree. @@ -379,6 +401,12 @@ enum { */ #define BPF_F_QUERY_EFFECTIVE (1U << 0) +/* type for BPF_ENABLE_STATS */ +enum bpf_stats_type { + /* enabled run_time_ns and run_cnt */ + BPF_STATS_RUN_TIME = 0, +}; + enum bpf_stack_build_id_status { /* user space need an empty entry to identify end of a trace */ BPF_STACK_BUILD_ID_EMPTY = 0, @@ -523,6 +551,7 @@ union bpf_attr { __u32 prog_id; __u32 map_id; __u32 btf_id; + __u32 link_id; }; __u32 next_id; __u32 open_flags; @@ -589,6 +618,15 @@ union bpf_attr { __u32 old_prog_fd; } link_update; + struct { /* struct used by BPF_ENABLE_STATS command */ + __u32 type; + } enable_stats; + + struct { /* struct used by BPF_ITER_CREATE command */ + __u32 link_fd; + __u32 flags; + } iter_create; + } __attribute__((aligned(8))); /* The description below is an attempt at providing documentation to eBPF @@ -644,14 +682,16 @@ union bpf_attr { * For tracing programs, safely attempt to read *size* bytes from * kernel space address *unsafe_ptr* and store the data in *dst*. * - * Generally, use bpf_probe_read_user() or bpf_probe_read_kernel() - * instead. + * Generally, use **bpf_probe_read_user**\ () or + * **bpf_probe_read_kernel**\ () instead. * Return * 0 on success, or a negative error in case of failure. * * u64 bpf_ktime_get_ns(void) * Description * Return the time elapsed since system boot, in nanoseconds. + * Does not include time the system was suspended. + * See: **clock_gettime**\ (**CLOCK_MONOTONIC**) * Return * Current *ktime*. * @@ -1510,11 +1550,11 @@ union bpf_attr { * int bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr) * Description * Copy a NUL terminated string from an unsafe kernel address - * *unsafe_ptr* to *dst*. See bpf_probe_read_kernel_str() for + * *unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for * more details. * - * Generally, use bpf_probe_read_user_str() or bpf_probe_read_kernel_str() - * instead. + * Generally, use **bpf_probe_read_user_str**\ () or + * **bpf_probe_read_kernel_str**\ () instead. * Return * On success, the strictly positive length of the string, * including the trailing NUL character. On error, a negative @@ -1542,7 +1582,7 @@ union bpf_attr { * * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx) * Description - * Equivalent to bpf_get_socket_cookie() helper that accepts + * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts * *skb*, but gets socket from **struct bpf_sock_ops** context. * Return * A 8-byte long non-decreasing number. @@ -1562,7 +1602,7 @@ union bpf_attr { * Return * 0 * - * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen) + * int bpf_setsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) * Description * Emulate a call to **setsockopt()** on the socket associated to * *bpf_socket*, which must be a full socket. The *level* at @@ -1570,6 +1610,12 @@ union bpf_attr { * must be specified, see **setsockopt(2)** for more information. * The option value of length *optlen* is pointed by *optval*. * + * *bpf_socket* should be one of the following: + * + * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT** + * and **BPF_CGROUP_INET6_CONNECT**. + * * This helper actually implements a subset of **setsockopt()**. * It supports the following *level*\ s: * @@ -1589,6 +1635,13 @@ union bpf_attr { * Grow or shrink the room for data in the packet associated to * *skb* by *len_diff*, and according to the selected *mode*. * + * By default, the helper will reset any offloaded checksum + * indicator of the skb to CHECKSUM_NONE. This can be avoided + * by the following flag: + * + * * **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded + * checksum data of the skb to CHECKSUM_NONE. + * * There are two supported modes at this time: * * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer @@ -1634,12 +1687,12 @@ union bpf_attr { * * The lower two bits of *flags* are used as the return code if * the map lookup fails. This is so that the return value can be - * one of the XDP program return codes up to XDP_TX, as chosen by - * the caller. Any higher bits in the *flags* argument must be + * one of the XDP program return codes up to **XDP_TX**, as chosen + * by the caller. Any higher bits in the *flags* argument must be * unset. * - * See also bpf_redirect(), which only supports redirecting to an - * ifindex, but doesn't require a map to do so. + * See also **bpf_redirect**\ (), which only supports redirecting + * to an ifindex, but doesn't require a map to do so. * Return * **XDP_REDIRECT** on success, or the value of the two lower bits * of the *flags* argument on error. @@ -1747,7 +1800,7 @@ union bpf_attr { * the time running for event since last normalization. The * enabled and running times are accumulated since the perf event * open. To achieve scaling factor between two invocations of an - * eBPF program, users can can use CPU id as the key (which is + * eBPF program, users can use CPU id as the key (which is * typical for perf array usage model) to remember the previous * value and do the calculation inside the eBPF program. * Return @@ -1764,7 +1817,7 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen) + * int bpf_getsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) * Description * Emulate a call to **getsockopt()** on the socket associated to * *bpf_socket*, which must be a full socket. The *level* at @@ -1773,6 +1826,12 @@ union bpf_attr { * The retrieved value is stored in the structure pointed by * *opval* and of length *optlen*. * + * *bpf_socket* should be one of the following: + * + * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT** + * and **BPF_CGROUP_INET6_CONNECT**. + * * This helper actually implements a subset of **getsockopt()**. * It supports the following *level*\ s: * @@ -1790,7 +1849,7 @@ union bpf_attr { * The first argument is the context *regs* on which the kprobe * works. * - * This helper works by setting setting the PC (program counter) + * This helper works by setting the PC (program counter) * to an override function which is run in place of the original * probed function. This means the probed function is not run at * all. The replacement function just returns with the required @@ -1959,18 +2018,19 @@ union bpf_attr { * * This helper works for IPv4 and IPv6, TCP and UDP sockets. The * domain (*addr*\ **->sa_family**) must be **AF_INET** (or - * **AF_INET6**). Looking for a free port to bind to can be - * expensive, therefore binding to port is not permitted by the - * helper: *addr*\ **->sin_port** (or **sin6_port**, respectively) - * must be set to zero. + * **AF_INET6**). It's advised to pass zero port (**sin_port** + * or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like + * behavior and lets the kernel efficiently pick up an unused + * port as long as 4-tuple is unique. Passing non-zero port might + * lead to degraded performance. * Return * 0 on success, or a negative error in case of failure. * * int bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta) * Description * Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is - * only possible to shrink the packet as of this writing, - * therefore *delta* must be a negative integer. + * possible to both shrink and grow the packet tail. + * Shrink done via *delta* being a negative integer. * * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers @@ -2256,7 +2316,7 @@ union bpf_attr { * **bpf_rc_keydown**\ () again with the same values, or calling * **bpf_rc_repeat**\ (). * - * Some protocols include a toggle bit, in case the button was + * Some protocols include a toggle bit, in case the button was * released and pressed again between consecutive scancodes. * * The *ctx* should point to the lirc sample as passed into @@ -2602,7 +2662,6 @@ union bpf_attr { * * *th* points to the start of the TCP header, while *th_len* * contains **sizeof**\ (**struct tcphdr**). - * * Return * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative * error otherwise. @@ -2785,7 +2844,6 @@ union bpf_attr { * * *th* points to the start of the TCP header, while *th_len* * contains the length of the TCP header. - * * Return * On success, lower 32 bits hold the generated SYN cookie in * followed by 16 bits which hold the MSS value for that cookie, @@ -2868,7 +2926,7 @@ union bpf_attr { * // size, after checking its boundaries. * } * - * In comparison, using **bpf_probe_read_user()** helper here + * In comparison, using **bpf_probe_read_user**\ () helper here * instead to read the string would require to estimate the length * at compile time, and would often result in copying more memory * than necessary. @@ -2886,14 +2944,14 @@ union bpf_attr { * int bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr) * Description * Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr* - * to *dst*. Same semantics as with bpf_probe_read_user_str() apply. + * to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply. * Return - * On success, the strictly positive length of the string, including + * On success, the strictly positive length of the string, including * the trailing NUL character. On error, a negative value. * * int bpf_tcp_send_ack(void *tp, u32 rcv_nxt) * Description - * Send out a tcp-ack. *tp* is the in-kernel struct tcp_sock. + * Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**. * *rcv_nxt* is the ack_seq to be sent out. * Return * 0 on success, or a negative error in case of failure. @@ -2921,19 +2979,19 @@ union bpf_attr { * int bpf_read_branch_records(struct bpf_perf_event_data *ctx, void *buf, u32 size, u64 flags) * Description * For an eBPF program attached to a perf event, retrieve the - * branch records (struct perf_branch_entry) associated to *ctx* - * and store it in the buffer pointed by *buf* up to size + * branch records (**struct perf_branch_entry**) associated to *ctx* + * and store it in the buffer pointed by *buf* up to size * *size* bytes. * Return * On success, number of bytes written to *buf*. On error, a * negative value. * * The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to - * instead return the number of bytes required to store all the + * instead return the number of bytes required to store all the * branch entries. If this flag is set, *buf* may be NULL. * * **-EINVAL** if arguments invalid or **size** not a multiple - * of sizeof(struct perf_branch_entry). + * of **sizeof**\ (**struct perf_branch_entry**\ ). * * **-ENOENT** if architecture does not support branch records. * @@ -2941,8 +2999,8 @@ union bpf_attr { * Description * Returns 0 on success, values for *pid* and *tgid* as seen from the current * *namespace* will be returned in *nsdata*. - * - * On failure, the returned value is one of the following: + * Return + * 0 on success, or one of the following in case of failure: * * **-EINVAL** if dev and inum supplied don't match dev_t and inode number * with nsfs of current task, or if dev conversion to dev_t lost high bits. @@ -2981,8 +3039,8 @@ union bpf_attr { * a global identifier that can be assumed unique. If *ctx* is * NULL, then the helper returns the cookie for the initial * network namespace. The cookie itself is very similar to that - * of bpf_get_socket_cookie() helper, but for network namespaces - * instead of sockets. + * of **bpf_get_socket_cookie**\ () helper, but for network + * namespaces instead of sockets. * Return * A 8-byte long opaque number. * @@ -3017,14 +3075,183 @@ union bpf_attr { * * The *flags* argument must be zero. * Return - * 0 on success, or a negative errno in case of failure. - * - * * **-EINVAL** Unsupported flags specified. - * * **-ENOENT** Socket is unavailable for assignment. - * * **-ENETUNREACH** Socket is unreachable (wrong netns). - * * **-EOPNOTSUPP** Unsupported operation, for example a - * call from outside of TC ingress. - * * **-ESOCKTNOSUPPORT** Socket type not supported (reuseport). + * 0 on success, or a negative error in case of failure: + * + * **-EINVAL** if specified *flags* are not supported. + * + * **-ENOENT** if the socket is unavailable for assignment. + * + * **-ENETUNREACH** if the socket is unreachable (wrong netns). + * + * **-EOPNOTSUPP** if the operation is not supported, for example + * a call from outside of TC ingress. + * + * **-ESOCKTNOSUPPORT** if the socket type is not supported + * (reuseport). + * + * u64 bpf_ktime_get_boot_ns(void) + * Description + * Return the time elapsed since system boot, in nanoseconds. + * Does include the time the system was suspended. + * See: **clock_gettime**\ (**CLOCK_BOOTTIME**) + * Return + * Current *ktime*. + * + * int bpf_seq_printf(struct seq_file *m, const char *fmt, u32 fmt_size, const void *data, u32 data_len) + * Description + * **bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print + * out the format string. + * The *m* represents the seq_file. The *fmt* and *fmt_size* are for + * the format string itself. The *data* and *data_len* are format string + * arguments. The *data* are a **u64** array and corresponding format string + * values are stored in the array. For strings and pointers where pointees + * are accessed, only the pointer values are stored in the *data* array. + * The *data_len* is the size of *data* in bytes. + * + * Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory. + * Reading kernel memory may fail due to either invalid address or + * valid address but requiring a major memory fault. If reading kernel memory + * fails, the string for **%s** will be an empty string, and the ip + * address for **%p{i,I}{4,6}** will be 0. Not returning error to + * bpf program is consistent with what **bpf_trace_printk**\ () does for now. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EBUSY** if per-CPU memory copy buffer is busy, can try again + * by returning 1 from bpf program. + * + * **-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported. + * + * **-E2BIG** if *fmt* contains too many format specifiers. + * + * **-EOVERFLOW** if an overflow happened: The same object will be tried again. + * + * int bpf_seq_write(struct seq_file *m, const void *data, u32 len) + * Description + * **bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data. + * The *m* represents the seq_file. The *data* and *len* represent the + * data to write in bytes. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EOVERFLOW** if an overflow happened: The same object will be tried again. + * + * u64 bpf_sk_cgroup_id(struct bpf_sock *sk) + * Description + * Return the cgroup v2 id of the socket *sk*. + * + * *sk* must be a non-**NULL** pointer to a full socket, e.g. one + * returned from **bpf_sk_lookup_xxx**\ (), + * **bpf_sk_fullsock**\ (), etc. The format of returned id is + * same as in **bpf_skb_cgroup_id**\ (). + * + * This helper is available only if the kernel was compiled with + * the **CONFIG_SOCK_CGROUP_DATA** configuration option. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * u64 bpf_sk_ancestor_cgroup_id(struct bpf_sock *sk, int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of cgroup associated + * with the *sk* at the *ancestor_level*. The root cgroup is at + * *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with *sk*, then return value will be same as that + * of **bpf_sk_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with *sk*. + * + * The format of returned id and helper limitations are same as in + * **bpf_sk_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * void *bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) + * Description + * Copy *size* bytes from *data* into a ring buffer *ringbuf*. + * If BPF_RB_NO_WAKEUP is specified in *flags*, no notification of + * new data availability is sent. + * IF BPF_RB_FORCE_WAKEUP is specified in *flags*, notification of + * new data availability is sent unconditionally. + * Return + * 0, on success; + * < 0, on error. + * + * void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags) + * Description + * Reserve *size* bytes of payload in a ring buffer *ringbuf*. + * Return + * Valid pointer with *size* bytes of memory available; NULL, + * otherwise. + * + * void bpf_ringbuf_submit(void *data, u64 flags) + * Description + * Submit reserved ring buffer sample, pointed to by *data*. + * If BPF_RB_NO_WAKEUP is specified in *flags*, no notification of + * new data availability is sent. + * IF BPF_RB_FORCE_WAKEUP is specified in *flags*, notification of + * new data availability is sent unconditionally. + * Return + * Nothing. Always succeeds. + * + * void bpf_ringbuf_discard(void *data, u64 flags) + * Description + * Discard reserved ring buffer sample, pointed to by *data*. + * If BPF_RB_NO_WAKEUP is specified in *flags*, no notification of + * new data availability is sent. + * IF BPF_RB_FORCE_WAKEUP is specified in *flags*, notification of + * new data availability is sent unconditionally. + * Return + * Nothing. Always succeeds. + * + * u64 bpf_ringbuf_query(void *ringbuf, u64 flags) + * Description + * Query various characteristics of provided ring buffer. What + * exactly is queries is determined by *flags*: + * - BPF_RB_AVAIL_DATA - amount of data not yet consumed; + * - BPF_RB_RING_SIZE - the size of ring buffer; + * - BPF_RB_CONS_POS - consumer position (can wrap around); + * - BPF_RB_PROD_POS - producer(s) position (can wrap around); + * Data returned is just a momentary snapshots of actual values + * and could be inaccurate, so this facility should be used to + * power heuristics and for reporting, not to make 100% correct + * calculation. + * Return + * Requested value, or 0, if flags are not recognized. + * + * int bpf_csum_level(struct sk_buff *skb, u64 level) + * Description + * Change the skbs checksum level by one layer up or down, or + * reset it entirely to none in order to have the stack perform + * checksum validation. The level is applicable to the following + * protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of + * | ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP | + * through **bpf_skb_adjust_room**\ () helper with passing in + * **BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one call + * to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since + * the UDP header is removed. Similarly, an encap of the latter + * into the former could be accompanied by a helper call to + * **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the + * skb is still intended to be processed in higher layers of the + * stack instead of just egressing at tc. + * + * There are three supported level settings at this time: + * + * * **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs + * with CHECKSUM_UNNECESSARY. + * * **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs + * with CHECKSUM_UNNECESSARY. + * * **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and + * sets CHECKSUM_NONE to force checksum validation by the stack. + * * **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current + * skb->csum_level. + * Return + * 0 on success, or a negative error in case of failure. In the + * case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level + * is returned or the error code -EACCES in case the skb is not + * subject to CHECKSUM_UNNECESSARY. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -3151,7 +3378,18 @@ union bpf_attr { FN(xdp_output), \ FN(get_netns_cookie), \ FN(get_current_ancestor_cgroup_id), \ - FN(sk_assign), + FN(sk_assign), \ + FN(ktime_get_boot_ns), \ + FN(seq_printf), \ + FN(seq_write), \ + FN(sk_cgroup_id), \ + FN(sk_ancestor_cgroup_id), \ + FN(ringbuf_output), \ + FN(ringbuf_reserve), \ + FN(ringbuf_submit), \ + FN(ringbuf_discard), \ + FN(ringbuf_query), \ + FN(csum_level), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -3228,6 +3466,14 @@ enum { BPF_F_CURRENT_NETNS = (-1L), }; +/* BPF_FUNC_csum_level level values. */ +enum { + BPF_CSUM_LEVEL_QUERY, + BPF_CSUM_LEVEL_INC, + BPF_CSUM_LEVEL_DEC, + BPF_CSUM_LEVEL_RESET, +}; + /* BPF_FUNC_skb_adjust_room flags. */ enum { BPF_F_ADJ_ROOM_FIXED_GSO = (1ULL << 0), @@ -3235,6 +3481,7 @@ enum { BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 = (1ULL << 2), BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3), BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4), + BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5), }; enum { @@ -3261,6 +3508,29 @@ enum { BPF_F_GET_BRANCH_RECORDS_SIZE = (1ULL << 0), }; +/* BPF_FUNC_bpf_ringbuf_commit, BPF_FUNC_bpf_ringbuf_discard, and + * BPF_FUNC_bpf_ringbuf_output flags. + */ +enum { + BPF_RB_NO_WAKEUP = (1ULL << 0), + BPF_RB_FORCE_WAKEUP = (1ULL << 1), +}; + +/* BPF_FUNC_bpf_ringbuf_query flags */ +enum { + BPF_RB_AVAIL_DATA = 0, + BPF_RB_RING_SIZE = 1, + BPF_RB_CONS_POS = 2, + BPF_RB_PROD_POS = 3, +}; + +/* BPF ring buffer constants */ +enum { + BPF_RINGBUF_BUSY_BIT = (1U << 31), + BPF_RINGBUF_DISCARD_BIT = (1U << 30), + BPF_RINGBUF_HDR_SZ = 8, +}; + /* Mode for BPF_FUNC_skb_adjust_room helper. */ enum bpf_adj_room_mode { BPF_ADJ_ROOM_NET, @@ -3393,6 +3663,7 @@ struct bpf_sock { __u32 dst_ip4; __u32 dst_ip6[4]; __u32 state; + __s32 rx_queue_mapping; }; struct bpf_tcp_sock { @@ -3486,6 +3757,8 @@ struct xdp_md { /* Below access go through struct xdp_rxq_info */ __u32 ingress_ifindex; /* rxq->dev->ifindex */ __u32 rx_queue_index; /* rxq->queue_index */ + + __u32 egress_ifindex; /* txq->dev->ifindex */ }; enum sk_action { @@ -3508,6 +3781,8 @@ struct sk_msg_md { __u32 remote_port; /* Stored in network byte order */ __u32 local_port; /* stored in host byte order */ __u32 size; /* Total size of sk_msg */ + + __bpf_md_ptr(struct bpf_sock *, sk); /* current socket */ }; struct sk_reuseport_md { @@ -3598,6 +3873,29 @@ struct bpf_btf_info { __u32 id; } __attribute__((aligned(8))); +struct bpf_link_info { + __u32 type; + __u32 id; + __u32 prog_id; + union { + struct { + __aligned_u64 tp_name; /* in/out: tp_name buffer ptr */ + __u32 tp_name_len; /* in/out: tp_name buffer len */ + } raw_tracepoint; + struct { + __u32 attach_type; + } tracing; + struct { + __u64 cgroup_id; + __u32 attach_type; + } cgroup; + struct { + __u32 netns_ino; + __u32 attach_type; + } netns; + }; +} __attribute__((aligned(8))); + /* User bpf_sock_addr struct to access socket fields and sockaddr struct passed * by user and intended to be used by socket (e.g. to bind to, depends on * attach attach type). @@ -3610,7 +3908,7 @@ struct bpf_sock_addr { __u32 user_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. * Stored in network byte order. */ - __u32 user_port; /* Allows 4-byte read and write. + __u32 user_port; /* Allows 1,2,4-byte read and 4-byte write. * Stored in network byte order */ __u32 family; /* Allows 4-byte read, but no write */ diff --git a/include/uapi/linux/btrfs_tree.h b/include/uapi/linux/btrfs_tree.h index 8e322e2c7e78..a3f3975df0de 100644 --- a/include/uapi/linux/btrfs_tree.h +++ b/include/uapi/linux/btrfs_tree.h @@ -519,15 +519,6 @@ struct btrfs_extent_inline_ref { __le64 offset; } __attribute__ ((__packed__)); -/* old style backrefs item */ -struct btrfs_extent_ref_v0 { - __le64 root; - __le64 generation; - __le64 objectid; - __le32 count; -} __attribute__ ((__packed__)); - - /* dev extents record free space on individual devices. The owner * field points back to the chunk allocation mapping tree that allocated * the extent. The chunk tree uuid field is a way to double check the owner diff --git a/include/uapi/linux/capability.h b/include/uapi/linux/capability.h index 272dc69fa080..48ff0757ae5e 100644 --- a/include/uapi/linux/capability.h +++ b/include/uapi/linux/capability.h @@ -274,6 +274,7 @@ struct vfs_ns_cap_data { arbitrary SCSI commands */ /* Allow setting encryption key on loopback filesystem */ /* Allow setting zone reclaim policy */ +/* Allow everything under CAP_BPF and CAP_PERFMON for backward compatibility */ #define CAP_SYS_ADMIN 21 @@ -332,6 +333,8 @@ struct vfs_ns_cap_data { #define CAP_AUDIT_CONTROL 30 +/* Set or remove capabilities on files */ + #define CAP_SETFCAP 31 /* Override MAC access. @@ -367,8 +370,45 @@ struct vfs_ns_cap_data { #define CAP_AUDIT_READ 37 +/* + * Allow system performance and observability privileged operations + * using perf_events, i915_perf and other kernel subsystems + */ + +#define CAP_PERFMON 38 + +/* + * CAP_BPF allows the following BPF operations: + * - Creating all types of BPF maps + * - Advanced verifier features + * - Indirect variable access + * - Bounded loops + * - BPF to BPF function calls + * - Scalar precision tracking + * - Larger complexity limits + * - Dead code elimination + * - And potentially other features + * - Loading BPF Type Format (BTF) data + * - Retrieve xlated and JITed code of BPF programs + * - Use bpf_spin_lock() helper + * + * CAP_PERFMON relaxes the verifier checks further: + * - BPF progs can use of pointer-to-integer conversions + * - speculation attack hardening measures are bypassed + * - bpf_probe_read to read arbitrary kernel memory is allowed + * - bpf_trace_printk to print kernel memory is allowed + * + * CAP_SYS_ADMIN is required to use bpf_probe_write_user. + * + * CAP_SYS_ADMIN is required to iterate system wide loaded + * programs, maps, links, BTFs and convert their IDs to file descriptors. + * + * CAP_PERFMON and CAP_BPF are required to load tracing programs. + * CAP_NET_ADMIN and CAP_BPF are required to load networking programs. + */ +#define CAP_BPF 39 -#define CAP_LAST_CAP CAP_AUDIT_READ +#define CAP_LAST_CAP CAP_BPF #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h index 1ae90e06c06d..08563e6a424d 100644 --- a/include/uapi/linux/devlink.h +++ b/include/uapi/linux/devlink.h @@ -233,10 +233,13 @@ enum { * @DEVLINK_TRAP_ACTION_DROP: Packet is dropped by the device and a copy is not * sent to the CPU. * @DEVLINK_TRAP_ACTION_TRAP: The sole copy of the packet is sent to the CPU. + * @DEVLINK_TRAP_ACTION_MIRROR: Packet is forwarded by the device and a copy is + * sent to the CPU. */ enum devlink_trap_action { DEVLINK_TRAP_ACTION_DROP, DEVLINK_TRAP_ACTION_TRAP, + DEVLINK_TRAP_ACTION_MIRROR, }; /** @@ -250,10 +253,16 @@ enum devlink_trap_action { * control plane for resolution. Trapped packets * are processed by devlink and injected to * the kernel's Rx path. + * @DEVLINK_TRAP_TYPE_CONTROL: Packet was trapped because it is required for + * the correct functioning of the control plane. + * For example, an ARP request packet. Trapped + * packets are injected to the kernel's Rx path, + * but not reported to drop monitor. */ enum devlink_trap_type { DEVLINK_TRAP_TYPE_DROP, DEVLINK_TRAP_TYPE_EXCEPTION, + DEVLINK_TRAP_TYPE_CONTROL, }; enum { diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h index 34c02e4290fe..c6dd0215482e 100644 --- a/include/uapi/linux/elf.h +++ b/include/uapi/linux/elf.h @@ -36,6 +36,7 @@ typedef __s64 Elf64_Sxword; #define PT_LOPROC 0x70000000 #define PT_HIPROC 0x7fffffff #define PT_GNU_EH_FRAME 0x6474e550 +#define PT_GNU_PROPERTY 0x6474e553 #define PT_GNU_STACK (PT_LOOS + 0x474e551) @@ -367,6 +368,7 @@ typedef struct elf64_shdr { * Notes used in ET_CORE. Architectures export some of the arch register sets * using the corresponding note types via the PTRACE_GETREGSET and * PTRACE_SETREGSET requests. + * The note name for all these is "LINUX". */ #define NT_PRSTATUS 1 #define NT_PRFPREG 2 @@ -429,6 +431,9 @@ typedef struct elf64_shdr { #define NT_MIPS_FP_MODE 0x801 /* MIPS floating-point mode */ #define NT_MIPS_MSA 0x802 /* MIPS SIMD registers */ +/* Note types with note name "GNU" */ +#define NT_GNU_PROPERTY_TYPE_0 5 + /* Note header in a PT_NOTE section */ typedef struct elf32_note { Elf32_Word n_namesz; /* Name size */ @@ -443,4 +448,10 @@ typedef struct elf64_note { Elf64_Word n_type; /* Content type */ } Elf64_Nhdr; +/* .note.gnu.property types for EM_AARCH64: */ +#define GNU_PROPERTY_AARCH64_FEATURE_1_AND 0xc0000000 + +/* Bits for GNU_PROPERTY_AARCH64_FEATURE_1_BTI */ +#define GNU_PROPERTY_AARCH64_FEATURE_1_BTI (1U << 0) + #endif /* _UAPI_LINUX_ELF_H */ diff --git a/include/uapi/linux/errqueue.h b/include/uapi/linux/errqueue.h index 0cca19670fd2..ca5cb3e3c6df 100644 --- a/include/uapi/linux/errqueue.h +++ b/include/uapi/linux/errqueue.h @@ -36,7 +36,7 @@ struct sock_extended_err { * * The timestamping interfaces SO_TIMESTAMPING, MSG_TSTAMP_* * communicate network timestamps by passing this struct in a cmsg with - * recvmsg(). See Documentation/networking/timestamping.txt for details. + * recvmsg(). See Documentation/networking/timestamping.rst for details. * User space sees a timespec definition that matches either * __kernel_timespec or __kernel_old_timespec, in the kernel we * require two structure definitions to provide both. diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 92f737f10117..f4662b3a9e1e 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1666,6 +1666,18 @@ static inline int ethtool_validate_duplex(__u8 duplex) return 0; } +#define MASTER_SLAVE_CFG_UNSUPPORTED 0 +#define MASTER_SLAVE_CFG_UNKNOWN 1 +#define MASTER_SLAVE_CFG_MASTER_PREFERRED 2 +#define MASTER_SLAVE_CFG_SLAVE_PREFERRED 3 +#define MASTER_SLAVE_CFG_MASTER_FORCE 4 +#define MASTER_SLAVE_CFG_SLAVE_FORCE 5 +#define MASTER_SLAVE_STATE_UNSUPPORTED 0 +#define MASTER_SLAVE_STATE_UNKNOWN 1 +#define MASTER_SLAVE_STATE_MASTER 2 +#define MASTER_SLAVE_STATE_SLAVE 3 +#define MASTER_SLAVE_STATE_ERR 4 + /* Which connector port. */ #define PORT_TP 0x00 #define PORT_AUI 0x01 @@ -1904,7 +1916,9 @@ struct ethtool_link_settings { __u8 eth_tp_mdix_ctrl; __s8 link_mode_masks_nwords; __u8 transceiver; - __u8 reserved1[3]; + __u8 master_slave_cfg; + __u8 master_slave_state; + __u8 reserved1[1]; __u32 reserved[7]; __u32 link_mode_masks[0]; /* layout of link_mode_masks fields: diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 7fde76366ba4..4dda5e4244a7 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -2,7 +2,7 @@ /* * include/uapi/linux/ethtool_netlink.h - netlink interface for ethtool * - * See Documentation/networking/ethtool-netlink.txt in kernel source tree for + * See Documentation/networking/ethtool-netlink.rst in kernel source tree for * doucumentation of the interface. */ @@ -39,6 +39,8 @@ enum { ETHTOOL_MSG_EEE_GET, ETHTOOL_MSG_EEE_SET, ETHTOOL_MSG_TSINFO_GET, + ETHTOOL_MSG_CABLE_TEST_ACT, + ETHTOOL_MSG_CABLE_TEST_TDR_ACT, /* add new constants above here */ __ETHTOOL_MSG_USER_CNT, @@ -74,6 +76,8 @@ enum { ETHTOOL_MSG_EEE_GET_REPLY, ETHTOOL_MSG_EEE_NTF, ETHTOOL_MSG_TSINFO_GET_REPLY, + ETHTOOL_MSG_CABLE_TEST_NTF, + ETHTOOL_MSG_CABLE_TEST_TDR_NTF, /* add new constants above here */ __ETHTOOL_MSG_KERNEL_CNT, @@ -216,6 +220,8 @@ enum { ETHTOOL_A_LINKMODES_PEER, /* bitset */ ETHTOOL_A_LINKMODES_SPEED, /* u32 */ ETHTOOL_A_LINKMODES_DUPLEX, /* u8 */ + ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG, /* u8 */ + ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE, /* u8 */ /* add new constants above here */ __ETHTOOL_A_LINKMODES_CNT, @@ -228,6 +234,8 @@ enum { ETHTOOL_A_LINKSTATE_UNSPEC, ETHTOOL_A_LINKSTATE_HEADER, /* nest - _A_HEADER_* */ ETHTOOL_A_LINKSTATE_LINK, /* u8 */ + ETHTOOL_A_LINKSTATE_SQI, /* u32 */ + ETHTOOL_A_LINKSTATE_SQI_MAX, /* u32 */ /* add new constants above here */ __ETHTOOL_A_LINKSTATE_CNT, @@ -403,6 +411,149 @@ enum { ETHTOOL_A_TSINFO_MAX = (__ETHTOOL_A_TSINFO_CNT - 1) }; +/* CABLE TEST */ + +enum { + ETHTOOL_A_CABLE_TEST_UNSPEC, + ETHTOOL_A_CABLE_TEST_HEADER, /* nest - _A_HEADER_* */ + + /* add new constants above here */ + __ETHTOOL_A_CABLE_TEST_CNT, + ETHTOOL_A_CABLE_TEST_MAX = __ETHTOOL_A_CABLE_TEST_CNT - 1 +}; + +/* CABLE TEST NOTIFY */ +enum { + ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC, + ETHTOOL_A_CABLE_RESULT_CODE_OK, + ETHTOOL_A_CABLE_RESULT_CODE_OPEN, + ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT, + ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT, +}; + +enum { + ETHTOOL_A_CABLE_PAIR_A, + ETHTOOL_A_CABLE_PAIR_B, + ETHTOOL_A_CABLE_PAIR_C, + ETHTOOL_A_CABLE_PAIR_D, +}; + +enum { + ETHTOOL_A_CABLE_RESULT_UNSPEC, + ETHTOOL_A_CABLE_RESULT_PAIR, /* u8 ETHTOOL_A_CABLE_PAIR_ */ + ETHTOOL_A_CABLE_RESULT_CODE, /* u8 ETHTOOL_A_CABLE_RESULT_CODE_ */ + + __ETHTOOL_A_CABLE_RESULT_CNT, + ETHTOOL_A_CABLE_RESULT_MAX = (__ETHTOOL_A_CABLE_RESULT_CNT - 1) +}; + +enum { + ETHTOOL_A_CABLE_FAULT_LENGTH_UNSPEC, + ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR, /* u8 ETHTOOL_A_CABLE_PAIR_ */ + ETHTOOL_A_CABLE_FAULT_LENGTH_CM, /* u32 */ + + __ETHTOOL_A_CABLE_FAULT_LENGTH_CNT, + ETHTOOL_A_CABLE_FAULT_LENGTH_MAX = (__ETHTOOL_A_CABLE_FAULT_LENGTH_CNT - 1) +}; + +enum { + ETHTOOL_A_CABLE_TEST_NTF_STATUS_UNSPEC, + ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED, + ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED +}; + +enum { + ETHTOOL_A_CABLE_NEST_UNSPEC, + ETHTOOL_A_CABLE_NEST_RESULT, /* nest - ETHTOOL_A_CABLE_RESULT_ */ + ETHTOOL_A_CABLE_NEST_FAULT_LENGTH, /* nest - ETHTOOL_A_CABLE_FAULT_LENGTH_ */ + __ETHTOOL_A_CABLE_NEST_CNT, + ETHTOOL_A_CABLE_NEST_MAX = (__ETHTOOL_A_CABLE_NEST_CNT - 1) +}; + +enum { + ETHTOOL_A_CABLE_TEST_NTF_UNSPEC, + ETHTOOL_A_CABLE_TEST_NTF_HEADER, /* nest - ETHTOOL_A_HEADER_* */ + ETHTOOL_A_CABLE_TEST_NTF_STATUS, /* u8 - _STARTED/_COMPLETE */ + ETHTOOL_A_CABLE_TEST_NTF_NEST, /* nest - of results: */ + + __ETHTOOL_A_CABLE_TEST_NTF_CNT, + ETHTOOL_A_CABLE_TEST_NTF_MAX = (__ETHTOOL_A_CABLE_TEST_NTF_CNT - 1) +}; + +/* CABLE TEST TDR */ + +enum { + ETHTOOL_A_CABLE_TEST_TDR_CFG_UNSPEC, + ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST, /* u32 */ + ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST, /* u32 */ + ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP, /* u32 */ + ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR, /* u8 */ + + /* add new constants above here */ + __ETHTOOL_A_CABLE_TEST_TDR_CFG_CNT, + ETHTOOL_A_CABLE_TEST_TDR_CFG_MAX = __ETHTOOL_A_CABLE_TEST_TDR_CFG_CNT - 1 +}; + +enum { + ETHTOOL_A_CABLE_TEST_TDR_UNSPEC, + ETHTOOL_A_CABLE_TEST_TDR_HEADER, /* nest - _A_HEADER_* */ + ETHTOOL_A_CABLE_TEST_TDR_CFG, /* nest - *_TDR_CFG_* */ + + /* add new constants above here */ + __ETHTOOL_A_CABLE_TEST_TDR_CNT, + ETHTOOL_A_CABLE_TEST_TDR_MAX = __ETHTOOL_A_CABLE_TEST_TDR_CNT - 1 +}; + +/* CABLE TEST TDR NOTIFY */ + +enum { + ETHTOOL_A_CABLE_AMPLITUDE_UNSPEC, + ETHTOOL_A_CABLE_AMPLITUDE_PAIR, /* u8 */ + ETHTOOL_A_CABLE_AMPLITUDE_mV, /* s16 */ + + __ETHTOOL_A_CABLE_AMPLITUDE_CNT, + ETHTOOL_A_CABLE_AMPLITUDE_MAX = (__ETHTOOL_A_CABLE_AMPLITUDE_CNT - 1) +}; + +enum { + ETHTOOL_A_CABLE_PULSE_UNSPEC, + ETHTOOL_A_CABLE_PULSE_mV, /* s16 */ + + __ETHTOOL_A_CABLE_PULSE_CNT, + ETHTOOL_A_CABLE_PULSE_MAX = (__ETHTOOL_A_CABLE_PULSE_CNT - 1) +}; + +enum { + ETHTOOL_A_CABLE_STEP_UNSPEC, + ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE, /* u32 */ + ETHTOOL_A_CABLE_STEP_LAST_DISTANCE, /* u32 */ + ETHTOOL_A_CABLE_STEP_STEP_DISTANCE, /* u32 */ + + __ETHTOOL_A_CABLE_STEP_CNT, + ETHTOOL_A_CABLE_STEP_MAX = (__ETHTOOL_A_CABLE_STEP_CNT - 1) +}; + +enum { + ETHTOOL_A_CABLE_TDR_NEST_UNSPEC, + ETHTOOL_A_CABLE_TDR_NEST_STEP, /* nest - ETHTTOOL_A_CABLE_STEP */ + ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE, /* nest - ETHTOOL_A_CABLE_AMPLITUDE */ + ETHTOOL_A_CABLE_TDR_NEST_PULSE, /* nest - ETHTOOL_A_CABLE_PULSE */ + + __ETHTOOL_A_CABLE_TDR_NEST_CNT, + ETHTOOL_A_CABLE_TDR_NEST_MAX = (__ETHTOOL_A_CABLE_TDR_NEST_CNT - 1) +}; + +enum { + ETHTOOL_A_CABLE_TEST_TDR_NTF_UNSPEC, + ETHTOOL_A_CABLE_TEST_TDR_NTF_HEADER, /* nest - ETHTOOL_A_HEADER_* */ + ETHTOOL_A_CABLE_TEST_TDR_NTF_STATUS, /* u8 - _STARTED/_COMPLETE */ + ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST, /* nest - of results: */ + + /* add new constants above here */ + __ETHTOOL_A_CABLE_TEST_TDR_NTF_CNT, + ETHTOOL_A_CABLE_TEST_TDR_NTF_MAX = __ETHTOOL_A_CABLE_TEST_TDR_NTF_CNT - 1 +}; + /* generic netlink info */ #define ETHTOOL_GENL_NAME "ethtool" #define ETHTOOL_GENL_VERSION 1 diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index ca88b7bce553..2f86b2ad6d7e 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -84,10 +84,20 @@ #define DN_ATTRIB 0x00000020 /* File changed attibutes */ #define DN_MULTISHOT 0x80000000 /* Don't remove notifier */ +/* + * The constants AT_REMOVEDIR and AT_EACCESS have the same value. AT_EACCESS is + * meaningful only to faccessat, while AT_REMOVEDIR is meaningful only to + * unlinkat. The two functions do completely different things and therefore, + * the flags can be allowed to overlap. For example, passing AT_REMOVEDIR to + * faccessat would be undefined behavior and thus treating it equivalent to + * AT_EACCESS is valid undefined behavior. + */ #define AT_FDCWD -100 /* Special value used to indicate openat should use the current working directory. */ #define AT_SYMLINK_NOFOLLOW 0x100 /* Do not follow symbolic links. */ +#define AT_EACCESS 0x200 /* Test access permitted for + effective IDs, not real IDs. */ #define AT_REMOVEDIR 0x200 /* Remove directory instead of unlinking file. */ #define AT_SYMLINK_FOLLOW 0x400 /* Follow symbolic links. */ diff --git a/include/uapi/linux/fd.h b/include/uapi/linux/fd.h index 90fb94712c41..8b80c63b971c 100644 --- a/include/uapi/linux/fd.h +++ b/include/uapi/linux/fd.h @@ -172,7 +172,10 @@ struct floppy_drive_params { * used in succession to try to read the disk. If the FDC cannot lock onto * the disk, the next format is tried. This uses the variable 'probing'. */ - short autodetect[8]; /* autodetected formats */ + +#define FD_AUTODETECT_SIZE 8 + + short autodetect[FD_AUTODETECT_SIZE]; /* autodetected formats */ int checkfreq; /* how often should the drive be checked for disk * changes */ @@ -357,10 +360,25 @@ struct floppy_raw_cmd { int buffer_length; /* length of allocated buffer */ unsigned char rate; + +#define FD_RAW_CMD_SIZE 16 +#define FD_RAW_REPLY_SIZE 16 +#define FD_RAW_CMD_FULLSIZE (FD_RAW_CMD_SIZE + 1 + FD_RAW_REPLY_SIZE) + + /* The command may take up the space initially intended for the reply + * and the reply count. Needed for long 82078 commands such as RESTORE, + * which takes 17 command bytes. + */ + unsigned char cmd_count; - unsigned char cmd[16]; - unsigned char reply_count; - unsigned char reply[16]; + union { + struct { + unsigned char cmd[FD_RAW_CMD_SIZE]; + unsigned char reply_count; + unsigned char reply[FD_RAW_REPLY_SIZE]; + }; + unsigned char fullcmd[FD_RAW_CMD_FULLSIZE]; + }; int track; int resultcode; diff --git a/include/uapi/linux/fdreg.h b/include/uapi/linux/fdreg.h index 1318881954e1..10d33632939d 100644 --- a/include/uapi/linux/fdreg.h +++ b/include/uapi/linux/fdreg.h @@ -7,13 +7,23 @@ * Handbook", Sanches and Canton. */ -/* Fd controller regs. S&C, about page 340 */ -#define FD_STATUS 4 -#define FD_DATA 5 +/* 82077's auxiliary status registers A & B (R) */ +#define FD_SRA 0 +#define FD_SRB 1 /* Digital Output Register */ #define FD_DOR 2 +/* 82077's tape drive register (R/W) */ +#define FD_TDR 3 + +/* 82077's data rate select register (W) */ +#define FD_DSR 4 + +/* Fd controller regs. S&C, about page 340 */ +#define FD_STATUS 4 +#define FD_DATA 5 + /* Digital Input Register (read) */ #define FD_DIR 7 diff --git a/include/uapi/linux/fiemap.h b/include/uapi/linux/fiemap.h index 8c0bc24d5d95..07c1cdcb715e 100644 --- a/include/uapi/linux/fiemap.h +++ b/include/uapi/linux/fiemap.h @@ -9,8 +9,8 @@ * Andreas Dilger <adilger@sun.com> */ -#ifndef _LINUX_FIEMAP_H -#define _LINUX_FIEMAP_H +#ifndef _UAPI_LINUX_FIEMAP_H +#define _UAPI_LINUX_FIEMAP_H #include <linux/types.h> @@ -67,4 +67,4 @@ struct fiemap { #define FIEMAP_EXTENT_SHARED 0x00002000 /* Space shared with other * files. */ -#endif /* _LINUX_FIEMAP_H */ +#endif /* _UAPI_LINUX_FIEMAP_H */ diff --git a/include/uapi/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h index 1acd2b179aef..7e5b5c10a49c 100644 --- a/include/uapi/linux/firewire-cdev.h +++ b/include/uapi/linux/firewire-cdev.h @@ -308,7 +308,7 @@ struct fw_cdev_event_iso_interrupt_mc { /** * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed * @closure: See &fw_cdev_event_common; - * set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl + * set by``FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE)`` ioctl * @type: %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED * @handle: Reference by which an allocated resource can be deallocated diff --git a/include/uapi/linux/fscrypt.h b/include/uapi/linux/fscrypt.h index a10e3cdc2839..7875709ccfeb 100644 --- a/include/uapi/linux/fscrypt.h +++ b/include/uapi/linux/fscrypt.h @@ -19,7 +19,8 @@ #define FSCRYPT_POLICY_FLAGS_PAD_MASK 0x03 #define FSCRYPT_POLICY_FLAG_DIRECT_KEY 0x04 #define FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64 0x08 -#define FSCRYPT_POLICY_FLAGS_VALID 0x0F +#define FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32 0x10 +#define FSCRYPT_POLICY_FLAGS_VALID 0x1F /* Encryption algorithms */ #define FSCRYPT_MODE_AES_256_XTS 1 diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h index 877f7fa95466..9c0636ec2286 100644 --- a/include/uapi/linux/genetlink.h +++ b/include/uapi/linux/genetlink.h @@ -48,6 +48,7 @@ enum { CTRL_CMD_NEWMCAST_GRP, CTRL_CMD_DELMCAST_GRP, CTRL_CMD_GETMCAST_GRP, /* unused */ + CTRL_CMD_GETPOLICY, __CTRL_CMD_MAX, }; @@ -62,6 +63,7 @@ enum { CTRL_ATTR_MAXATTR, CTRL_ATTR_OPS, CTRL_ATTR_MCAST_GROUPS, + CTRL_ATTR_POLICY, __CTRL_ATTR_MAX, }; diff --git a/include/uapi/linux/if.h b/include/uapi/linux/if.h index be714cd8c826..797ba2c1562a 100644 --- a/include/uapi/linux/if.h +++ b/include/uapi/linux/if.h @@ -178,6 +178,7 @@ enum { enum { IF_LINK_MODE_DEFAULT, IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */ + IF_LINK_MODE_TESTING, /* limit upward transition to testing */ }; /* diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index bfe621ea51b3..caa6914a3e53 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -120,6 +120,7 @@ enum { IFLA_BRIDGE_MODE, IFLA_BRIDGE_VLAN_INFO, IFLA_BRIDGE_VLAN_TUNNEL_INFO, + IFLA_BRIDGE_MRP, __IFLA_BRIDGE_MAX, }; #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) @@ -157,6 +158,101 @@ struct bridge_vlan_xstats { __u32 pad2; }; +enum { + IFLA_BRIDGE_MRP_UNSPEC, + IFLA_BRIDGE_MRP_INSTANCE, + IFLA_BRIDGE_MRP_PORT_STATE, + IFLA_BRIDGE_MRP_PORT_ROLE, + IFLA_BRIDGE_MRP_RING_STATE, + IFLA_BRIDGE_MRP_RING_ROLE, + IFLA_BRIDGE_MRP_START_TEST, + __IFLA_BRIDGE_MRP_MAX, +}; + +#define IFLA_BRIDGE_MRP_MAX (__IFLA_BRIDGE_MRP_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_INSTANCE_UNSPEC, + IFLA_BRIDGE_MRP_INSTANCE_RING_ID, + IFLA_BRIDGE_MRP_INSTANCE_P_IFINDEX, + IFLA_BRIDGE_MRP_INSTANCE_S_IFINDEX, + IFLA_BRIDGE_MRP_INSTANCE_PRIO, + __IFLA_BRIDGE_MRP_INSTANCE_MAX, +}; + +#define IFLA_BRIDGE_MRP_INSTANCE_MAX (__IFLA_BRIDGE_MRP_INSTANCE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_PORT_STATE_UNSPEC, + IFLA_BRIDGE_MRP_PORT_STATE_STATE, + __IFLA_BRIDGE_MRP_PORT_STATE_MAX, +}; + +#define IFLA_BRIDGE_MRP_PORT_STATE_MAX (__IFLA_BRIDGE_MRP_PORT_STATE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_PORT_ROLE_UNSPEC, + IFLA_BRIDGE_MRP_PORT_ROLE_ROLE, + __IFLA_BRIDGE_MRP_PORT_ROLE_MAX, +}; + +#define IFLA_BRIDGE_MRP_PORT_ROLE_MAX (__IFLA_BRIDGE_MRP_PORT_ROLE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_RING_STATE_UNSPEC, + IFLA_BRIDGE_MRP_RING_STATE_RING_ID, + IFLA_BRIDGE_MRP_RING_STATE_STATE, + __IFLA_BRIDGE_MRP_RING_STATE_MAX, +}; + +#define IFLA_BRIDGE_MRP_RING_STATE_MAX (__IFLA_BRIDGE_MRP_RING_STATE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_RING_ROLE_UNSPEC, + IFLA_BRIDGE_MRP_RING_ROLE_RING_ID, + IFLA_BRIDGE_MRP_RING_ROLE_ROLE, + __IFLA_BRIDGE_MRP_RING_ROLE_MAX, +}; + +#define IFLA_BRIDGE_MRP_RING_ROLE_MAX (__IFLA_BRIDGE_MRP_RING_ROLE_MAX - 1) + +enum { + IFLA_BRIDGE_MRP_START_TEST_UNSPEC, + IFLA_BRIDGE_MRP_START_TEST_RING_ID, + IFLA_BRIDGE_MRP_START_TEST_INTERVAL, + IFLA_BRIDGE_MRP_START_TEST_MAX_MISS, + IFLA_BRIDGE_MRP_START_TEST_PERIOD, + IFLA_BRIDGE_MRP_START_TEST_MONITOR, + __IFLA_BRIDGE_MRP_START_TEST_MAX, +}; + +#define IFLA_BRIDGE_MRP_START_TEST_MAX (__IFLA_BRIDGE_MRP_START_TEST_MAX - 1) + +struct br_mrp_instance { + __u32 ring_id; + __u32 p_ifindex; + __u32 s_ifindex; + __u16 prio; +}; + +struct br_mrp_ring_state { + __u32 ring_id; + __u32 ring_state; +}; + +struct br_mrp_ring_role { + __u32 ring_id; + __u32 ring_role; +}; + +struct br_mrp_start_test { + __u32 ring_id; + __u32 interval; + __u32 max_miss; + __u32 period; + __u32 monitor; +}; + struct bridge_stp_xstats { __u64 transition_blk; __u64 transition_fwd; diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index f6ceb2e63d1e..d6de2b167448 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -92,6 +92,7 @@ #define ETH_P_PREAUTH 0x88C7 /* 802.11 Preauthentication */ #define ETH_P_TIPC 0x88CA /* TIPC */ #define ETH_P_LLDP 0x88CC /* Link Layer Discovery Protocol */ +#define ETH_P_MRP 0x88E3 /* Media Redundancy Protocol */ #define ETH_P_MACSEC 0x88E5 /* 802.1ae MACsec */ #define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ #define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */ diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 127c704eeba9..a009365ad67b 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -343,6 +343,7 @@ enum { IFLA_BRPORT_NEIGH_SUPPRESS, IFLA_BRPORT_ISOLATED, IFLA_BRPORT_BACKUP_PORT, + IFLA_BRPORT_MRP_RING_OPEN, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) diff --git a/include/uapi/linux/if_x25.h b/include/uapi/linux/if_x25.h index 5d962448345f..3a5938e38370 100644 --- a/include/uapi/linux/if_x25.h +++ b/include/uapi/linux/if_x25.h @@ -18,7 +18,7 @@ #include <linux/types.h> -/* Documentation/networking/x25-iface.txt */ +/* Documentation/networking/x25-iface.rst */ #define X25_IFACE_DATA 0x00 #define X25_IFACE_CONNECT 0x01 #define X25_IFACE_DISCONNECT 0x02 diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h index 57cc429a9177..e6f183ee8417 100644 --- a/include/uapi/linux/inet_diag.h +++ b/include/uapi/linux/inet_diag.h @@ -96,6 +96,7 @@ enum { INET_DIAG_BC_MARK_COND, INET_DIAG_BC_S_EQ, INET_DIAG_BC_D_EQ, + INET_DIAG_BC_CGROUP_COND, /* u64 cgroup v2 ID */ }; struct inet_diag_hostcond { @@ -157,6 +158,7 @@ enum { INET_DIAG_MD5SIG, INET_DIAG_ULP_INFO, INET_DIAG_SK_BPF_STORAGES, + INET_DIAG_CGROUP_ID, __INET_DIAG_MAX, }; diff --git a/include/uapi/linux/io_uring.h b/include/uapi/linux/io_uring.h index e48d746b8e2a..92c22699a5a7 100644 --- a/include/uapi/linux/io_uring.h +++ b/include/uapi/linux/io_uring.h @@ -129,6 +129,7 @@ enum { IORING_OP_SPLICE, IORING_OP_PROVIDE_BUFFERS, IORING_OP_REMOVE_BUFFERS, + IORING_OP_TEE, /* this goes last, obviously */ IORING_OP_LAST, @@ -204,10 +205,19 @@ struct io_cqring_offsets { __u32 ring_entries; __u32 overflow; __u32 cqes; - __u64 resv[2]; + __u32 flags; + __u32 resv1; + __u64 resv2; }; /* + * cq_ring->flags + */ + +/* disable eventfd notifications */ +#define IORING_CQ_EVENTFD_DISABLED (1U << 0) + +/* * io_uring_enter(2) flags */ #define IORING_ENTER_GETEVENTS (1U << 0) diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index 20917c59f39c..b6be62356d34 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -251,7 +251,7 @@ struct kfd_memory_exception_failure { __u32 imprecise; /* Can't determine the exact fault address */ }; -/* memory exception data*/ +/* memory exception data */ struct kfd_hsa_memory_exception_data { struct kfd_memory_exception_failure failure; __u64 va; @@ -410,6 +410,20 @@ struct kfd_ioctl_unmap_memory_from_gpu_args { __u32 n_success; /* to/from KFD */ }; +/* Allocate GWS for specific queue + * + * @queue_id: queue's id that GWS is allocated for + * @num_gws: how many GWS to allocate + * @first_gws: index of the first GWS allocated. + * only support contiguous GWS allocation + */ +struct kfd_ioctl_alloc_queue_gws_args { + __u32 queue_id; /* to KFD */ + __u32 num_gws; /* to KFD */ + __u32 first_gws; /* from KFD */ + __u32 pad; +}; + struct kfd_ioctl_get_dmabuf_info_args { __u64 size; /* from KFD */ __u64 metadata_ptr; /* to KFD */ @@ -529,7 +543,10 @@ enum kfd_mmio_remap { #define AMDKFD_IOC_IMPORT_DMABUF \ AMDKFD_IOWR(0x1D, struct kfd_ioctl_import_dmabuf_args) +#define AMDKFD_IOC_ALLOC_QUEUE_GWS \ + AMDKFD_IOWR(0x1E, struct kfd_ioctl_alloc_queue_gws_args) + #define AMDKFD_COMMAND_START 0x01 -#define AMDKFD_COMMAND_END 0x1E +#define AMDKFD_COMMAND_END 0x1F #endif diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 428c7dde6b4b..4fdf30316582 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -116,7 +116,7 @@ struct kvm_irq_level { * ACPI gsi notion of irq. * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47.. * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23.. - * For ARM: See Documentation/virt/kvm/api.txt + * For ARM: See Documentation/virt/kvm/api.rst */ union { __u32 irq; @@ -188,10 +188,13 @@ struct kvm_s390_cmma_log { struct kvm_hyperv_exit { #define KVM_EXIT_HYPERV_SYNIC 1 #define KVM_EXIT_HYPERV_HCALL 2 +#define KVM_EXIT_HYPERV_SYNDBG 3 __u32 type; + __u32 pad1; union { struct { __u32 msr; + __u32 pad2; __u64 control; __u64 evt_page; __u64 msg_page; @@ -201,6 +204,15 @@ struct kvm_hyperv_exit { __u64 result; __u64 params[2]; } hcall; + struct { + __u32 msr; + __u32 pad2; + __u64 control; + __u64 status; + __u64 send_page; + __u64 recv_page; + __u64 pending_page; + } syndbg; } u; }; @@ -1017,6 +1029,8 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_VCPU_RESETS 179 #define KVM_CAP_S390_PROTECTED 180 #define KVM_CAP_PPC_SECURE_GUEST 181 +#define KVM_CAP_HALT_POLL 182 +#define KVM_CAP_ASYNC_PF_INT 183 #ifdef KVM_CAP_IRQ_ROUTING @@ -1107,7 +1121,7 @@ struct kvm_xen_hvm_config { * * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies * the irqfd to operate in resampling mode for level triggered interrupt - * emulation. See Documentation/virt/kvm/api.txt. + * emulation. See Documentation/virt/kvm/api.rst. */ #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1) diff --git a/include/uapi/linux/loop.h b/include/uapi/linux/loop.h index 080a8df134ef..24a1c45bd1ae 100644 --- a/include/uapi/linux/loop.h +++ b/include/uapi/linux/loop.h @@ -25,6 +25,16 @@ enum { LO_FLAGS_DIRECT_IO = 16, }; +/* LO_FLAGS that can be set using LOOP_SET_STATUS(64) */ +#define LOOP_SET_STATUS_SETTABLE_FLAGS (LO_FLAGS_AUTOCLEAR | LO_FLAGS_PARTSCAN) + +/* LO_FLAGS that can be cleared using LOOP_SET_STATUS(64) */ +#define LOOP_SET_STATUS_CLEARABLE_FLAGS (LO_FLAGS_AUTOCLEAR) + +/* LO_FLAGS that can be set using LOOP_CONFIGURE */ +#define LOOP_CONFIGURE_SETTABLE_FLAGS (LO_FLAGS_READ_ONLY | LO_FLAGS_AUTOCLEAR \ + | LO_FLAGS_PARTSCAN | LO_FLAGS_DIRECT_IO) + #include <asm/posix_types.h> /* for __kernel_old_dev_t */ #include <linux/types.h> /* for __u64 */ @@ -37,7 +47,7 @@ struct loop_info { int lo_offset; int lo_encrypt_type; int lo_encrypt_key_size; /* ioctl w/o */ - int lo_flags; /* ioctl r/o */ + int lo_flags; char lo_name[LO_NAME_SIZE]; unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ unsigned long lo_init[2]; @@ -53,13 +63,29 @@ struct loop_info64 { __u32 lo_number; /* ioctl r/o */ __u32 lo_encrypt_type; __u32 lo_encrypt_key_size; /* ioctl w/o */ - __u32 lo_flags; /* ioctl r/o */ + __u32 lo_flags; __u8 lo_file_name[LO_NAME_SIZE]; __u8 lo_crypt_name[LO_NAME_SIZE]; __u8 lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ __u64 lo_init[2]; }; +/** + * struct loop_config - Complete configuration for a loop device. + * @fd: fd of the file to be used as a backing file for the loop device. + * @block_size: block size to use; ignored if 0. + * @info: struct loop_info64 to configure the loop device with. + * + * This structure is used with the LOOP_CONFIGURE ioctl, and can be used to + * atomically setup and configure all loop device parameters at once. + */ +struct loop_config { + __u32 fd; + __u32 block_size; + struct loop_info64 info; + __u64 __reserved[8]; +}; + /* * Loop filter types */ @@ -90,6 +116,7 @@ struct loop_info64 { #define LOOP_SET_CAPACITY 0x4C07 #define LOOP_SET_DIRECT_IO 0x4C08 #define LOOP_SET_BLOCK_SIZE 0x4C09 +#define LOOP_CONFIGURE 0x4C0A /* /dev/loop-control interface */ #define LOOP_CTL_ADD 0x4C80 diff --git a/include/uapi/linux/mii.h b/include/uapi/linux/mii.h index 90f9b4e1ba27..39f7c44baf53 100644 --- a/include/uapi/linux/mii.h +++ b/include/uapi/linux/mii.h @@ -151,11 +151,13 @@ /* 1000BASE-T Control register */ #define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ #define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +#define CTL1000_PREFER_MASTER 0x0400 /* prefer to operate as master */ #define CTL1000_AS_MASTER 0x0800 #define CTL1000_ENABLE_MASTER 0x1000 /* 1000BASE-T Status register */ #define LPA_1000MSFAIL 0x8000 /* Master/Slave resolution failure */ +#define LPA_1000MSRES 0x4000 /* Master/Slave resolution status */ #define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ #define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ #define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ diff --git a/include/uapi/linux/mmc/ioctl.h b/include/uapi/linux/mmc/ioctl.h index 00c08120f3ba..27a39847d55c 100644 --- a/include/uapi/linux/mmc/ioctl.h +++ b/include/uapi/linux/mmc/ioctl.h @@ -3,6 +3,7 @@ #define LINUX_MMC_IOCTL_H #include <linux/types.h> +#include <linux/major.h> struct mmc_ioc_cmd { /* diff --git a/include/uapi/linux/mrp_bridge.h b/include/uapi/linux/mrp_bridge.h new file mode 100644 index 000000000000..84f15f48a7cb --- /dev/null +++ b/include/uapi/linux/mrp_bridge.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ + +#ifndef _UAPI_LINUX_MRP_BRIDGE_H_ +#define _UAPI_LINUX_MRP_BRIDGE_H_ + +#include <linux/types.h> +#include <linux/if_ether.h> + +#define MRP_MAX_FRAME_LENGTH 200 +#define MRP_DEFAULT_PRIO 0x8000 +#define MRP_DOMAIN_UUID_LENGTH 16 +#define MRP_VERSION 1 +#define MRP_FRAME_PRIO 7 +#define MRP_OUI_LENGTH 3 +#define MRP_MANUFACTURE_DATA_LENGTH 2 + +enum br_mrp_ring_role_type { + BR_MRP_RING_ROLE_DISABLED, + BR_MRP_RING_ROLE_MRC, + BR_MRP_RING_ROLE_MRM, + BR_MRP_RING_ROLE_MRA, +}; + +enum br_mrp_ring_state_type { + BR_MRP_RING_STATE_OPEN, + BR_MRP_RING_STATE_CLOSED, +}; + +enum br_mrp_port_state_type { + BR_MRP_PORT_STATE_DISABLED, + BR_MRP_PORT_STATE_BLOCKED, + BR_MRP_PORT_STATE_FORWARDING, + BR_MRP_PORT_STATE_NOT_CONNECTED, +}; + +enum br_mrp_port_role_type { + BR_MRP_PORT_ROLE_PRIMARY, + BR_MRP_PORT_ROLE_SECONDARY, + BR_MRP_PORT_ROLE_NONE, +}; + +enum br_mrp_tlv_header_type { + BR_MRP_TLV_HEADER_END = 0x0, + BR_MRP_TLV_HEADER_COMMON = 0x1, + BR_MRP_TLV_HEADER_RING_TEST = 0x2, + BR_MRP_TLV_HEADER_RING_TOPO = 0x3, + BR_MRP_TLV_HEADER_RING_LINK_DOWN = 0x4, + BR_MRP_TLV_HEADER_RING_LINK_UP = 0x5, + BR_MRP_TLV_HEADER_OPTION = 0x7f, +}; + +enum br_mrp_sub_tlv_header_type { + BR_MRP_SUB_TLV_HEADER_TEST_MGR_NACK = 0x1, + BR_MRP_SUB_TLV_HEADER_TEST_PROPAGATE = 0x2, + BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR = 0x3, +}; + +struct br_mrp_tlv_hdr { + __u8 type; + __u8 length; +}; + +struct br_mrp_sub_tlv_hdr { + __u8 type; + __u8 length; +}; + +struct br_mrp_end_hdr { + struct br_mrp_tlv_hdr hdr; +}; + +struct br_mrp_common_hdr { + __be16 seq_id; + __u8 domain[MRP_DOMAIN_UUID_LENGTH]; +}; + +struct br_mrp_ring_test_hdr { + __be16 prio; + __u8 sa[ETH_ALEN]; + __be16 port_role; + __be16 state; + __be16 transitions; + __be32 timestamp; +}; + +struct br_mrp_ring_topo_hdr { + __be16 prio; + __u8 sa[ETH_ALEN]; + __be16 interval; +}; + +struct br_mrp_ring_link_hdr { + __u8 sa[ETH_ALEN]; + __be16 port_role; + __be16 interval; + __be16 blocked; +}; + +struct br_mrp_sub_opt_hdr { + __u8 type; + __u8 manufacture_data[MRP_MANUFACTURE_DATA_LENGTH]; +}; + +struct br_mrp_test_mgr_nack_hdr { + __be16 prio; + __u8 sa[ETH_ALEN]; + __be16 other_prio; + __u8 other_sa[ETH_ALEN]; +}; + +struct br_mrp_test_prop_hdr { + __be16 prio; + __u8 sa[ETH_ALEN]; + __be16 other_prio; + __u8 other_sa[ETH_ALEN]; +}; + +struct br_mrp_oui_hdr { + __u8 oui[MRP_OUI_LENGTH]; +}; + +#endif diff --git a/include/uapi/linux/neighbour.h b/include/uapi/linux/neighbour.h index cd144e3099a3..eefcda8ca44e 100644 --- a/include/uapi/linux/neighbour.h +++ b/include/uapi/linux/neighbour.h @@ -29,6 +29,7 @@ enum { NDA_LINK_NETNSID, NDA_SRC_VNI, NDA_PROTOCOL, /* Originator of entry */ + NDA_NH_ID, __NDA_MAX }; diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h index b6f0bb1dc799..4b3395082d15 100644 --- a/include/uapi/linux/netfilter/nf_conntrack_common.h +++ b/include/uapi/linux/netfilter/nf_conntrack_common.h @@ -114,15 +114,19 @@ enum ip_conntrack_status { IPS_OFFLOAD_BIT = 14, IPS_OFFLOAD = (1 << IPS_OFFLOAD_BIT), + /* Conntrack has been offloaded to hardware. */ + IPS_HW_OFFLOAD_BIT = 15, + IPS_HW_OFFLOAD = (1 << IPS_HW_OFFLOAD_BIT), + /* Be careful here, modifying these bits can make things messy, * so don't let users modify them directly. */ IPS_UNCHANGEABLE_MASK = (IPS_NAT_DONE_MASK | IPS_NAT_MASK | IPS_EXPECTED | IPS_CONFIRMED | IPS_DYING | IPS_SEQ_ADJUST | IPS_TEMPLATE | IPS_UNTRACKED | - IPS_OFFLOAD), + IPS_OFFLOAD | IPS_HW_OFFLOAD), - __IPS_MAX_BIT = 15, + __IPS_MAX_BIT = 16, }; /* Connection tracking event types */ diff --git a/include/uapi/linux/netfilter/nf_nat.h b/include/uapi/linux/netfilter/nf_nat.h index 4a95c0db14d4..a64586e77b24 100644 --- a/include/uapi/linux/netfilter/nf_nat.h +++ b/include/uapi/linux/netfilter/nf_nat.h @@ -11,6 +11,7 @@ #define NF_NAT_RANGE_PERSISTENT (1 << 3) #define NF_NAT_RANGE_PROTO_RANDOM_FULLY (1 << 4) #define NF_NAT_RANGE_PROTO_OFFSET (1 << 5) +#define NF_NAT_RANGE_NETMAP (1 << 6) #define NF_NAT_RANGE_PROTO_RANDOM_ALL \ (NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PROTO_RANDOM_FULLY) @@ -18,7 +19,8 @@ #define NF_NAT_RANGE_MASK \ (NF_NAT_RANGE_MAP_IPS | NF_NAT_RANGE_PROTO_SPECIFIED | \ NF_NAT_RANGE_PROTO_RANDOM | NF_NAT_RANGE_PERSISTENT | \ - NF_NAT_RANGE_PROTO_RANDOM_FULLY | NF_NAT_RANGE_PROTO_OFFSET) + NF_NAT_RANGE_PROTO_RANDOM_FULLY | NF_NAT_RANGE_PROTO_OFFSET | \ + NF_NAT_RANGE_NETMAP) struct nf_nat_ipv4_range { unsigned int flags; diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 1d41810d17e2..262881792671 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -55,6 +55,7 @@ enum ctattr_type { CTA_LABELS, CTA_LABELS_MASK, CTA_SYNPROXY, + CTA_FILTER, __CTA_MAX }; #define CTA_MAX (__CTA_MAX - 1) @@ -276,4 +277,12 @@ enum ctattr_expect_stats { }; #define CTA_STATS_EXP_MAX (__CTA_STATS_EXP_MAX - 1) +enum ctattr_filter { + CTA_FILTER_UNSPEC, + CTA_FILTER_ORIG_FLAGS, + CTA_FILTER_REPLY_FLAGS, + __CTA_FILTER_MAX +}; +#define CTA_FILTER_MAX (__CTA_FILTER_MAX - 1) + #endif /* _IPCONNTRACK_NETLINK_H */ diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h index 0a4d73317759..eac8a6a648ea 100644 --- a/include/uapi/linux/netlink.h +++ b/include/uapi/linux/netlink.h @@ -249,4 +249,107 @@ struct nla_bitfield32 { __u32 selector; }; +/* + * policy descriptions - it's specific to each family how this is used + * Normally, it should be retrieved via a dump inside another attribute + * specifying where it applies. + */ + +/** + * enum netlink_attribute_type - type of an attribute + * @NL_ATTR_TYPE_INVALID: unused + * @NL_ATTR_TYPE_FLAG: flag attribute (present/not present) + * @NL_ATTR_TYPE_U8: 8-bit unsigned attribute + * @NL_ATTR_TYPE_U16: 16-bit unsigned attribute + * @NL_ATTR_TYPE_U32: 32-bit unsigned attribute + * @NL_ATTR_TYPE_U64: 64-bit unsigned attribute + * @NL_ATTR_TYPE_S8: 8-bit signed attribute + * @NL_ATTR_TYPE_S16: 16-bit signed attribute + * @NL_ATTR_TYPE_S32: 32-bit signed attribute + * @NL_ATTR_TYPE_S64: 64-bit signed attribute + * @NL_ATTR_TYPE_BINARY: binary data, min/max length may be specified + * @NL_ATTR_TYPE_STRING: string, min/max length may be specified + * @NL_ATTR_TYPE_NUL_STRING: NUL-terminated string, + * min/max length may be specified + * @NL_ATTR_TYPE_NESTED: nested, i.e. the content of this attribute + * consists of sub-attributes. The nested policy and maxtype + * inside may be specified. + * @NL_ATTR_TYPE_NESTED_ARRAY: nested array, i.e. the content of this + * attribute contains sub-attributes whose type is irrelevant + * (just used to separate the array entries) and each such array + * entry has attributes again, the policy for those inner ones + * and the corresponding maxtype may be specified. + * @NL_ATTR_TYPE_BITFIELD32: &struct nla_bitfield32 attribute + */ +enum netlink_attribute_type { + NL_ATTR_TYPE_INVALID, + + NL_ATTR_TYPE_FLAG, + + NL_ATTR_TYPE_U8, + NL_ATTR_TYPE_U16, + NL_ATTR_TYPE_U32, + NL_ATTR_TYPE_U64, + + NL_ATTR_TYPE_S8, + NL_ATTR_TYPE_S16, + NL_ATTR_TYPE_S32, + NL_ATTR_TYPE_S64, + + NL_ATTR_TYPE_BINARY, + NL_ATTR_TYPE_STRING, + NL_ATTR_TYPE_NUL_STRING, + + NL_ATTR_TYPE_NESTED, + NL_ATTR_TYPE_NESTED_ARRAY, + + NL_ATTR_TYPE_BITFIELD32, +}; + +/** + * enum netlink_policy_type_attr - policy type attributes + * @NL_POLICY_TYPE_ATTR_UNSPEC: unused + * @NL_POLICY_TYPE_ATTR_TYPE: type of the attribute, + * &enum netlink_attribute_type (U32) + * @NL_POLICY_TYPE_ATTR_MIN_VALUE_S: minimum value for signed + * integers (S64) + * @NL_POLICY_TYPE_ATTR_MAX_VALUE_S: maximum value for signed + * integers (S64) + * @NL_POLICY_TYPE_ATTR_MIN_VALUE_U: minimum value for unsigned + * integers (U64) + * @NL_POLICY_TYPE_ATTR_MAX_VALUE_U: maximum value for unsigned + * integers (U64) + * @NL_POLICY_TYPE_ATTR_MIN_LENGTH: minimum length for binary + * attributes, no minimum if not given (U32) + * @NL_POLICY_TYPE_ATTR_MAX_LENGTH: maximum length for binary + * attributes, no maximum if not given (U32) + * @NL_POLICY_TYPE_ATTR_POLICY_IDX: sub policy for nested and + * nested array types (U32) + * @NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE: maximum sub policy + * attribute for nested and nested array types, this can + * in theory be < the size of the policy pointed to by + * the index, if limited inside the nesting (U32) + * @NL_POLICY_TYPE_ATTR_BITFIELD32_MASK: valid mask for the + * bitfield32 type (U32) + * @NL_POLICY_TYPE_ATTR_PAD: pad attribute for 64-bit alignment + */ +enum netlink_policy_type_attr { + NL_POLICY_TYPE_ATTR_UNSPEC, + NL_POLICY_TYPE_ATTR_TYPE, + NL_POLICY_TYPE_ATTR_MIN_VALUE_S, + NL_POLICY_TYPE_ATTR_MAX_VALUE_S, + NL_POLICY_TYPE_ATTR_MIN_VALUE_U, + NL_POLICY_TYPE_ATTR_MAX_VALUE_U, + NL_POLICY_TYPE_ATTR_MIN_LENGTH, + NL_POLICY_TYPE_ATTR_MAX_LENGTH, + NL_POLICY_TYPE_ATTR_POLICY_IDX, + NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE, + NL_POLICY_TYPE_ATTR_BITFIELD32_MASK, + NL_POLICY_TYPE_ATTR_PAD, + + /* keep last */ + __NL_POLICY_TYPE_ATTR_MAX, + NL_POLICY_TYPE_ATTR_MAX = __NL_POLICY_TYPE_ATTR_MAX - 1 +}; + #endif /* _UAPI__LINUX_NETLINK_H */ diff --git a/include/uapi/linux/nexthop.h b/include/uapi/linux/nexthop.h index 7b61867e9848..2d4a1e784cf0 100644 --- a/include/uapi/linux/nexthop.h +++ b/include/uapi/linux/nexthop.h @@ -49,6 +49,9 @@ enum { NHA_GROUPS, /* flag; only return nexthop groups in dump */ NHA_MASTER, /* u32; only return nexthops with given master dev */ + NHA_FDB, /* flag; nexthop belongs to a bridge fdb */ + /* if NHA_FDB is added, OIF, BLACKHOLE, ENCAP cannot be set */ + __NHA_MAX, }; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 2b691161830f..dad8c8f8581f 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -296,13 +296,14 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the - * attributes determining the channel width; this is used for setting - * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, - * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, - * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. - * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL - * instead, the support here is for backward compatibility only. + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the + * channel width; this is used for setting monitor mode channel), + * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, + * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or + * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, + * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward + * compatibility only. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -351,7 +352,8 @@ * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. * The channel to use can be set on the interface or be given using the - * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. + * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the + * attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -536,11 +538,12 @@ * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify * the SSID (mainly for association, but is included in authentication - * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used - * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE - * is used to specify the authentication type. %NL80211_ATTR_IE is used to - * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) - * to be added to the frame. + * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + + * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the + * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the + * authentication type. %NL80211_ATTR_IE is used to define IEs + * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added + * to the frame. * When used as an event, this reports reception of an Authentication * frame in station and IBSS modes when the local MLME processed the * frame, i.e., it was for the local STA and was received in correct @@ -595,8 +598,9 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, - * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, + * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and @@ -687,6 +691,10 @@ * four bytes for vendor frames including the OUI. The registration * cannot be dropped, but is removed automatically when the netlink * socket is closed. Multiple registrations can be made. + * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if + * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which + * case the registration can also be modified to include/exclude the + * flag, rather than requiring unregistration to change it. * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for * backward compatibility * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This @@ -1151,6 +1159,17 @@ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration * is passed using %NL80211_ATTR_TID_CONFIG attribute. * + * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon + * frame. This event is used to indicate that a received Beacon frame was + * dropped because it did not include a valid MME MIC while beacon + * protection was enabled (BIGTK configured in station mode). + * + * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control + * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. + * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME + * includes the contents of the frame. %NL80211_ATTR_ACK flag is included + * if the recipient acknowledged the frame. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1377,6 +1396,10 @@ enum nl80211_commands { NL80211_CMD_SET_TID_CONFIG, + NL80211_CMD_UNPROT_BEACON, + + NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1422,7 +1445,8 @@ enum nl80211_commands { * of &enum nl80211_chan_width, describing the channel width. See the * documentation of the enum for more information. * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the - * channel, used for anything but 20 MHz bandwidth + * channel, used for anything but 20 MHz bandwidth. In S1G this is the + * operating channel center frequency. * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the * channel, used only for 80+80 MHz bandwidth * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ @@ -2469,6 +2493,17 @@ enum nl80211_commands { * entry without having to force a disconnection after the PMK timeout. If * no roaming occurs between the reauth threshold and PMK expiration, * disassociation is still forced. + * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the + * %NL80211_CMD_REGISTER_FRAME command, see the description there. + * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated + * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with + * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. + * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the + * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. + * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies + * + * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from + * association request when used with NL80211_CMD_NEW_STATION). * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2945,6 +2980,13 @@ enum nl80211_attrs { NL80211_ATTR_PMK_LIFETIME, NL80211_ATTR_PMK_REAUTH_THRESHOLD, + NL80211_ATTR_RECEIVE_MULTICAST, + NL80211_ATTR_WIPHY_FREQ_OFFSET, + NL80211_ATTR_CENTER_FREQ1_OFFSET, + NL80211_ATTR_SCAN_FREQ_KHZ, + + NL80211_ATTR_HE_6GHZ_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3523,6 +3565,8 @@ enum nl80211_mpath_info { * defined in HE capabilities IE * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently * defined + * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), + * given for all 6 GHz band channels * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use */ enum nl80211_band_iftype_attr { @@ -3533,6 +3577,7 @@ enum nl80211_band_iftype_attr { NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, + NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, /* keep last */ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, @@ -3666,6 +3711,7 @@ enum nl80211_wmm_rule { * (see &enum nl80211_wmm_rule) * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel * in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -3696,6 +3742,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_10MHZ, NL80211_FREQUENCY_ATTR_WMM, NL80211_FREQUENCY_ATTR_NO_HE, + NL80211_FREQUENCY_ATTR_OFFSET, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4466,6 +4513,7 @@ enum nl80211_bss_scan_width { * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. * Contains a nested array of signal strength attributes (u8, dBm), * using the nesting index as the antenna number. + * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -4490,6 +4538,7 @@ enum nl80211_bss { NL80211_BSS_PARENT_TSF, NL80211_BSS_PARENT_BSSID, NL80211_BSS_CHAIN_SIGNAL, + NL80211_BSS_FREQUENCY_OFFSET, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -4800,6 +4849,17 @@ enum nl80211_tid_config { NL80211_TID_CONFIG_DISABLE, }; +/* enum nl80211_tx_rate_setting - TX rate configuration type + * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate + * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter + * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter + */ +enum nl80211_tx_rate_setting { + NL80211_TX_RATE_AUTOMATIC, + NL80211_TX_RATE_LIMITED, + NL80211_TX_RATE_FIXED, +}; + /* enum nl80211_tid_config_attr - TID specific configuration. * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported @@ -4807,12 +4867,10 @@ enum nl80211_tid_config { * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but * per peer instead. - * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if no peer - * is selected, if set indicates that the new configuration overrides - * all previous peer configurations, otherwise previous peer specific - * configurations should be left untouched. If peer is selected then - * it will reset particular TID configuration of that peer and it will - * not accept other TID config attributes along with peer. + * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates + * that the new configuration overrides all previous peer + * configurations, otherwise previous peer specific configurations + * should be left untouched. * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) * Its type is u16. * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. @@ -4828,12 +4886,23 @@ enum nl80211_tid_config { * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and * the max value is advertised by the driver in this attribute on * output in wiphy capabilities. - * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable aggregation for the TIDs - * specified in %NL80211_TID_CONFIG_ATTR_TIDS. Its type is u8, using - * the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. + * Its type is u8, using the values from &nl80211_tid_config. * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using * the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. + * Its type is u8, using the values from &nl80211_tid_config. + * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful + * to notfiy the driver that what type of txrate should be used + * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using + * the values form &nl80211_tx_rate_setting. + * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied + * with the parameters passed through %NL80211_ATTR_TX_RATES. + * configuration is applied to the data frame for the tid to that connected + * station. */ enum nl80211_tid_config_attr { __NL80211_TID_CONFIG_ATTR_INVALID, @@ -4847,6 +4916,9 @@ enum nl80211_tid_config_attr { NL80211_TID_CONFIG_ATTR_RETRY_LONG, NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, + NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, + NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, + NL80211_TID_CONFIG_ATTR_TX_RATE, /* keep last */ __NL80211_TID_CONFIG_ATTR_AFTER_LAST, @@ -5324,6 +5396,8 @@ enum plink_actions { #define NL80211_KCK_LEN 16 #define NL80211_KEK_LEN 16 +#define NL80211_KCK_EXT_LEN 24 +#define NL80211_KEK_EXT_LEN 32 #define NL80211_REPLAY_CTR_LEN 8 /** @@ -5332,6 +5406,7 @@ enum plink_actions { * @NL80211_REKEY_DATA_KEK: key encryption key (binary) * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) + * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) */ @@ -5340,6 +5415,7 @@ enum nl80211_rekey_data { NL80211_REKEY_DATA_KEK, NL80211_REKEY_DATA_KCK, NL80211_REKEY_DATA_REPLAY_CTR, + NL80211_REKEY_DATA_AKM, /* keep last */ NUM_NL80211_REKEY_DATA, @@ -5674,6 +5750,8 @@ enum nl80211_feature_flags { * * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection * and can receive key configuration for BIGTK using key indexes 6 and 7. + * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon + * protection as a client only and cannot transmit protected beacons. * * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the * forwarding of preauth frames over the control port. They are then @@ -5684,6 +5762,17 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations * in IBSS mode, essentially by dropping their state. * + * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations + * are possible for multicast frames and those will be reported properly. + * + * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and + * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to + * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be + * included in the scan request. + * + * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver + * can report tx status for control port over nl80211 tx operations. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5735,6 +5824,10 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, NL80211_EXT_FEATURE_PROTECTED_TWT, NL80211_EXT_FEATURE_DEL_IBSS_STA, + NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, + NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, + NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -5846,6 +5939,9 @@ enum nl80211_timeout_reason { * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to * only have supported rates and no additional capabilities (unless * added by userspace explicitly.) + * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with + * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means + * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -5861,6 +5957,7 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, + NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, }; /** diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h index 9f06d29cab70..7576209d96f9 100644 --- a/include/uapi/linux/pkt_cls.h +++ b/include/uapi/linux/pkt_cls.h @@ -134,6 +134,7 @@ enum tca_id { TCA_ID_CTINFO, TCA_ID_MPLS, TCA_ID_CT, + TCA_ID_GATE, /* other actions go here */ __TCA_ID_MAX = 255 }; @@ -575,6 +576,8 @@ enum { TCA_FLOWER_KEY_CT_LABELS, /* u128 */ TCA_FLOWER_KEY_CT_LABELS_MASK, /* u128 */ + TCA_FLOWER_KEY_MPLS_OPTS, + __TCA_FLOWER_MAX, }; @@ -640,6 +643,27 @@ enum { (__TCA_FLOWER_KEY_ENC_OPT_ERSPAN_MAX - 1) enum { + TCA_FLOWER_KEY_MPLS_OPTS_UNSPEC, + TCA_FLOWER_KEY_MPLS_OPTS_LSE, + __TCA_FLOWER_KEY_MPLS_OPTS_MAX, +}; + +#define TCA_FLOWER_KEY_MPLS_OPTS_MAX (__TCA_FLOWER_KEY_MPLS_OPTS_MAX - 1) + +enum { + TCA_FLOWER_KEY_MPLS_OPT_LSE_UNSPEC, + TCA_FLOWER_KEY_MPLS_OPT_LSE_DEPTH, + TCA_FLOWER_KEY_MPLS_OPT_LSE_TTL, + TCA_FLOWER_KEY_MPLS_OPT_LSE_BOS, + TCA_FLOWER_KEY_MPLS_OPT_LSE_TC, + TCA_FLOWER_KEY_MPLS_OPT_LSE_LABEL, + __TCA_FLOWER_KEY_MPLS_OPT_LSE_MAX, +}; + +#define TCA_FLOWER_KEY_MPLS_OPT_LSE_MAX \ + (__TCA_FLOWER_KEY_MPLS_OPT_LSE_MAX - 1) + +enum { TCA_FLOWER_KEY_FLAGS_IS_FRAGMENT = (1 << 0), TCA_FLOWER_KEY_FLAGS_FRAG_IS_FIRST = (1 << 1), }; diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h index 0c02737c8f47..a95f3ae7ab37 100644 --- a/include/uapi/linux/pkt_sched.h +++ b/include/uapi/linux/pkt_sched.h @@ -913,6 +913,10 @@ enum { TCA_FQ_TIMER_SLACK, /* timer slack */ + TCA_FQ_HORIZON, /* time horizon in us */ + + TCA_FQ_HORIZON_DROP, /* drop packets beyond horizon, or cap their EDT */ + __TCA_FQ_MAX }; @@ -932,6 +936,8 @@ struct tc_fq_qd_stats { __u32 throttled_flows; __u32 unthrottle_latency_ns; __u64 ce_mark; /* packets above ce_threshold */ + __u64 horizon_drops; + __u64 horizon_caps; }; /* Heavy-Hitter Filter */ diff --git a/include/uapi/linux/psample.h b/include/uapi/linux/psample.h index ce1116cff53d..aea26ab1431c 100644 --- a/include/uapi/linux/psample.h +++ b/include/uapi/linux/psample.h @@ -11,6 +11,7 @@ enum { PSAMPLE_ATTR_GROUP_SEQ, PSAMPLE_ATTR_SAMPLE_RATE, PSAMPLE_ATTR_DATA, + PSAMPLE_ATTR_TUNNEL, /* commands attributes */ PSAMPLE_ATTR_GROUP_REFCOUNT, @@ -25,6 +26,27 @@ enum psample_command { PSAMPLE_CMD_DEL_GROUP, }; +enum psample_tunnel_key_attr { + PSAMPLE_TUNNEL_KEY_ATTR_ID, /* be64 Tunnel ID */ + PSAMPLE_TUNNEL_KEY_ATTR_IPV4_SRC, /* be32 src IP address. */ + PSAMPLE_TUNNEL_KEY_ATTR_IPV4_DST, /* be32 dst IP address. */ + PSAMPLE_TUNNEL_KEY_ATTR_TOS, /* u8 Tunnel IP ToS. */ + PSAMPLE_TUNNEL_KEY_ATTR_TTL, /* u8 Tunnel IP TTL. */ + PSAMPLE_TUNNEL_KEY_ATTR_DONT_FRAGMENT, /* No argument, set DF. */ + PSAMPLE_TUNNEL_KEY_ATTR_CSUM, /* No argument. CSUM packet. */ + PSAMPLE_TUNNEL_KEY_ATTR_OAM, /* No argument. OAM frame. */ + PSAMPLE_TUNNEL_KEY_ATTR_GENEVE_OPTS, /* Array of Geneve options. */ + PSAMPLE_TUNNEL_KEY_ATTR_TP_SRC, /* be16 src Transport Port. */ + PSAMPLE_TUNNEL_KEY_ATTR_TP_DST, /* be16 dst Transport Port. */ + PSAMPLE_TUNNEL_KEY_ATTR_VXLAN_OPTS, /* Nested VXLAN opts* */ + PSAMPLE_TUNNEL_KEY_ATTR_IPV6_SRC, /* struct in6_addr src IPv6 address. */ + PSAMPLE_TUNNEL_KEY_ATTR_IPV6_DST, /* struct in6_addr dst IPv6 address. */ + PSAMPLE_TUNNEL_KEY_ATTR_PAD, + PSAMPLE_TUNNEL_KEY_ATTR_ERSPAN_OPTS, /* struct erspan_metadata */ + PSAMPLE_TUNNEL_KEY_ATTR_IPV4_INFO_BRIDGE, /* No argument. IPV4_INFO_BRIDGE mode.*/ + __PSAMPLE_TUNNEL_KEY_ATTR_MAX +}; + /* Can be overridden at runtime by module option */ #define PSAMPLE_ATTR_MAX (__PSAMPLE_ATTR_MAX - 1) diff --git a/include/uapi/linux/psp-sev.h b/include/uapi/linux/psp-sev.h index 0549a5c622bf..91b4c63d5cbf 100644 --- a/include/uapi/linux/psp-sev.h +++ b/include/uapi/linux/psp-sev.h @@ -83,6 +83,8 @@ struct sev_user_data_status { __u32 guest_count; /* Out */ } __packed; +#define SEV_STATUS_FLAGS_CONFIG_ES 0x0100 + /** * struct sev_user_data_pek_csr - PEK_CSR command parameters * diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index 9dc9d0079e98..ff070aa64278 100644 --- a/include/uapi/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h @@ -89,7 +89,9 @@ struct ptp_clock_caps { int n_pins; /* Number of input/output pins. */ /* Whether the clock supports precise system-device cross timestamps */ int cross_timestamping; - int rsv[13]; /* Reserved for future use. */ + /* Whether the clock supports adjust phase */ + int adjust_phase; + int rsv[12]; /* Reserved for future use. */ }; struct ptp_extts_request { diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index 4a8c5b745157..073e71ef6bdd 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -609,11 +609,17 @@ enum { TCA_HW_OFFLOAD, TCA_INGRESS_BLOCK, TCA_EGRESS_BLOCK, + TCA_DUMP_FLAGS, __TCA_MAX }; #define TCA_MAX (__TCA_MAX - 1) +#define TCA_DUMP_FLAGS_TERSE (1 << 0) /* Means that in dump user gets only basic + * data necessary to identify the objects + * (handle, cookie, etc.) and stats. + */ + #define TCA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct tcmsg)))) #define TCA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct tcmsg)) diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h index ad80a5c885d5..82cc58fe9368 100644 --- a/include/uapi/linux/stat.h +++ b/include/uapi/linux/stat.h @@ -123,7 +123,10 @@ struct statx { __u32 stx_dev_major; /* ID of device containing file [uncond] */ __u32 stx_dev_minor; /* 0x90 */ - __u64 __spare2[14]; /* Spare space for future expansion */ + __u64 stx_mnt_id; + __u64 __spare2; + /* 0xa0 */ + __u64 __spare3[12]; /* Spare space for future expansion */ /* 0x100 */ }; @@ -148,9 +151,19 @@ struct statx { #define STATX_BLOCKS 0x00000400U /* Want/got stx_blocks */ #define STATX_BASIC_STATS 0x000007ffU /* The stuff in the normal stat struct */ #define STATX_BTIME 0x00000800U /* Want/got stx_btime */ -#define STATX_ALL 0x00000fffU /* All currently supported flags */ +#define STATX_MNT_ID 0x00001000U /* Got stx_mnt_id */ + #define STATX__RESERVED 0x80000000U /* Reserved for future struct statx expansion */ +#ifndef __KERNEL__ +/* + * This is deprecated, and shall remain the same value in the future. To avoid + * confusion please use the equivalent (STATX_BASIC_STATS | STATX_BTIME) + * instead. + */ +#define STATX_ALL 0x00000fffU +#endif + /* * Attributes to be found in stx_attributes and masked in stx_attributes_mask. * @@ -168,7 +181,9 @@ struct statx { #define STATX_ATTR_NODUMP 0x00000040 /* [I] File is not to be dumped */ #define STATX_ATTR_ENCRYPTED 0x00000800 /* [I] File requires key to decrypt in fs */ #define STATX_ATTR_AUTOMOUNT 0x00001000 /* Dir: Automount trigger */ +#define STATX_ATTR_MOUNT_ROOT 0x00002000 /* Root of a mount */ #define STATX_ATTR_VERITY 0x00100000 /* [I] Verity protected file */ +#define STATX_ATTR_DAX 0x00002000 /* [I] File is DAX */ #endif /* _UAPI_LINUX_STAT_H */ diff --git a/include/uapi/linux/tc_act/tc_gate.h b/include/uapi/linux/tc_act/tc_gate.h new file mode 100644 index 000000000000..f214b3a6d44f --- /dev/null +++ b/include/uapi/linux/tc_act/tc_gate.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* Copyright 2020 NXP */ + +#ifndef __LINUX_TC_GATE_H +#define __LINUX_TC_GATE_H + +#include <linux/pkt_cls.h> + +struct tc_gate { + tc_gen; +}; + +enum { + TCA_GATE_ENTRY_UNSPEC, + TCA_GATE_ENTRY_INDEX, + TCA_GATE_ENTRY_GATE, + TCA_GATE_ENTRY_INTERVAL, + TCA_GATE_ENTRY_IPV, + TCA_GATE_ENTRY_MAX_OCTETS, + __TCA_GATE_ENTRY_MAX, +}; +#define TCA_GATE_ENTRY_MAX (__TCA_GATE_ENTRY_MAX - 1) + +enum { + TCA_GATE_ONE_ENTRY_UNSPEC, + TCA_GATE_ONE_ENTRY, + __TCA_GATE_ONE_ENTRY_MAX, +}; +#define TCA_GATE_ONE_ENTRY_MAX (__TCA_GATE_ONE_ENTRY_MAX - 1) + +enum { + TCA_GATE_UNSPEC, + TCA_GATE_TM, + TCA_GATE_PARMS, + TCA_GATE_PAD, + TCA_GATE_PRIORITY, + TCA_GATE_ENTRY_LIST, + TCA_GATE_BASE_TIME, + TCA_GATE_CYCLE_TIME, + TCA_GATE_CYCLE_TIME_EXT, + TCA_GATE_FLAGS, + TCA_GATE_CLOCKID, + __TCA_GATE_MAX, +}; +#define TCA_GATE_MAX (__TCA_GATE_MAX - 1) + +#endif diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index 6596f3a09e54..b619f37ee03e 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -173,6 +173,15 @@ struct tee_ioctl_buf_data { #define TEE_IOCTL_LOGIN_APPLICATION 4 #define TEE_IOCTL_LOGIN_USER_APPLICATION 5 #define TEE_IOCTL_LOGIN_GROUP_APPLICATION 6 +/* + * Disallow user-space to use GP implementation specific login + * method range (0x80000000 - 0xBFFFFFFF). This range is rather + * being reserved for REE kernel clients or TEE implementation. + */ +#define TEE_IOCTL_LOGIN_REE_KERNEL_MIN 0x80000000 +#define TEE_IOCTL_LOGIN_REE_KERNEL_MAX 0xBFFFFFFF +/* Private login method for REE kernel clients */ +#define TEE_IOCTL_LOGIN_REE_KERNEL 0x80000000 /** * struct tee_ioctl_param - parameter diff --git a/include/uapi/linux/usb/raw_gadget.h b/include/uapi/linux/usb/raw_gadget.h index ea375082b3ac..0be685272eb1 100644 --- a/include/uapi/linux/usb/raw_gadget.h +++ b/include/uapi/linux/usb/raw_gadget.h @@ -93,6 +93,64 @@ struct usb_raw_ep_io { __u8 data[0]; }; +/* Maximum number of non-control endpoints in struct usb_raw_eps_info. */ +#define USB_RAW_EPS_NUM_MAX 30 + +/* Maximum length of UDC endpoint name in struct usb_raw_ep_info. */ +#define USB_RAW_EP_NAME_MAX 16 + +/* Used as addr in struct usb_raw_ep_info if endpoint accepts any address. */ +#define USB_RAW_EP_ADDR_ANY 0xff + +/* + * struct usb_raw_ep_caps - exposes endpoint capabilities from struct usb_ep + * (technically from its member struct usb_ep_caps). + */ +struct usb_raw_ep_caps { + __u32 type_control : 1; + __u32 type_iso : 1; + __u32 type_bulk : 1; + __u32 type_int : 1; + __u32 dir_in : 1; + __u32 dir_out : 1; +}; + +/* + * struct usb_raw_ep_limits - exposes endpoint limits from struct usb_ep. + * @maxpacket_limit: Maximum packet size value supported by this endpoint. + * @max_streams: maximum number of streams supported by this endpoint + * (actual number is 2^n). + * @reserved: Empty, reserved for potential future extensions. + */ +struct usb_raw_ep_limits { + __u16 maxpacket_limit; + __u16 max_streams; + __u32 reserved; +}; + +/* + * struct usb_raw_ep_info - stores information about a gadget endpoint. + * @name: Name of the endpoint as it is defined in the UDC driver. + * @addr: Address of the endpoint that must be specified in the endpoint + * descriptor passed to USB_RAW_IOCTL_EP_ENABLE ioctl. + * @caps: Endpoint capabilities. + * @limits: Endpoint limits. + */ +struct usb_raw_ep_info { + __u8 name[USB_RAW_EP_NAME_MAX]; + __u32 addr; + struct usb_raw_ep_caps caps; + struct usb_raw_ep_limits limits; +}; + +/* + * struct usb_raw_eps_info - argument for USB_RAW_IOCTL_EPS_INFO ioctl. + * eps: Structures that store information about non-control endpoints. + */ +struct usb_raw_eps_info { + struct usb_raw_ep_info eps[USB_RAW_EPS_NUM_MAX]; +}; + /* * Initializes a Raw Gadget instance. * Accepts a pointer to the usb_raw_init struct as an argument. @@ -115,37 +173,38 @@ struct usb_raw_ep_io { #define USB_RAW_IOCTL_EVENT_FETCH _IOR('U', 2, struct usb_raw_event) /* - * Queues an IN (OUT for READ) urb as a response to the last control request - * received on endpoint 0, provided that was an IN (OUT for READ) request and - * waits until the urb is completed. Copies received data to user for READ. + * Queues an IN (OUT for READ) request as a response to the last setup request + * received on endpoint 0 (provided that was an IN (OUT for READ) request), and + * waits until the request is completed. Copies received data to user for READ. * Accepts a pointer to the usb_raw_ep_io struct as an argument. - * Returns length of trasferred data on success or negative error code on + * Returns length of transferred data on success or negative error code on * failure. */ #define USB_RAW_IOCTL_EP0_WRITE _IOW('U', 3, struct usb_raw_ep_io) #define USB_RAW_IOCTL_EP0_READ _IOWR('U', 4, struct usb_raw_ep_io) /* - * Finds an endpoint that supports the transfer type specified in the - * descriptor and enables it. - * Accepts a pointer to the usb_endpoint_descriptor struct as an argument. + * Finds an endpoint that satisfies the parameters specified in the provided + * descriptors (address, transfer type, etc.) and enables it. + * Accepts a pointer to the usb_raw_ep_descs struct as an argument. * Returns enabled endpoint handle on success or negative error code on failure. */ #define USB_RAW_IOCTL_EP_ENABLE _IOW('U', 5, struct usb_endpoint_descriptor) -/* Disables specified endpoint. +/* + * Disables specified endpoint. * Accepts endpoint handle as an argument. * Returns 0 on success or negative error code on failure. */ #define USB_RAW_IOCTL_EP_DISABLE _IOW('U', 6, __u32) /* - * Queues an IN (OUT for READ) urb as a response to the last control request - * received on endpoint usb_raw_ep_io.ep, provided that was an IN (OUT for READ) - * request and waits until the urb is completed. Copies received data to user - * for READ. + * Queues an IN (OUT for READ) request as a response to the last setup request + * received on endpoint usb_raw_ep_io.ep (provided that was an IN (OUT for READ) + * request), and waits until the request is completed. Copies received data to + * user for READ. * Accepts a pointer to the usb_raw_ep_io struct as an argument. - * Returns length of trasferred data on success or negative error code on + * Returns length of transferred data on success or negative error code on * failure. */ #define USB_RAW_IOCTL_EP_WRITE _IOW('U', 7, struct usb_raw_ep_io) @@ -164,4 +223,27 @@ struct usb_raw_ep_io { */ #define USB_RAW_IOCTL_VBUS_DRAW _IOW('U', 10, __u32) +/* + * Fills in the usb_raw_eps_info structure with information about non-control + * endpoints available for the currently connected UDC. + * Returns the number of available endpoints on success or negative error code + * on failure. + */ +#define USB_RAW_IOCTL_EPS_INFO _IOR('U', 11, struct usb_raw_eps_info) + +/* + * Stalls a pending control request on endpoint 0. + * Returns 0 on success or negative error code on failure. + */ +#define USB_RAW_IOCTL_EP0_STALL _IO('U', 12) + +/* + * Sets or clears halt or wedge status of the endpoint. + * Accepts endpoint handle as an argument. + * Returns 0 on success or negative error code on failure. + */ +#define USB_RAW_IOCTL_EP_SET_HALT _IOW('U', 13, __u32) +#define USB_RAW_IOCTL_EP_CLEAR_HALT _IOW('U', 14, __u32) +#define USB_RAW_IOCTL_EP_SET_WEDGE _IOW('U', 15, __u32) + #endif /* _UAPI__LINUX_USB_RAW_GADGET_H */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 1a58d7cc4ccc..62271418c1be 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -473,6 +473,10 @@ enum v4l2_mpeg_video_h264_level { V4L2_MPEG_VIDEO_H264_LEVEL_4_2 = 13, V4L2_MPEG_VIDEO_H264_LEVEL_5_0 = 14, V4L2_MPEG_VIDEO_H264_LEVEL_5_1 = 15, + V4L2_MPEG_VIDEO_H264_LEVEL_5_2 = 16, + V4L2_MPEG_VIDEO_H264_LEVEL_6_0 = 17, + V4L2_MPEG_VIDEO_H264_LEVEL_6_1 = 18, + V4L2_MPEG_VIDEO_H264_LEVEL_6_2 = 19, }; #define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA (V4L2_CID_MPEG_BASE+360) #define V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA (V4L2_CID_MPEG_BASE+361) @@ -501,6 +505,7 @@ enum v4l2_mpeg_video_h264_profile { V4L2_MPEG_VIDEO_H264_PROFILE_SCALABLE_HIGH_INTRA = 14, V4L2_MPEG_VIDEO_H264_PROFILE_STEREO_HIGH = 15, V4L2_MPEG_VIDEO_H264_PROFILE_MULTIVIEW_HIGH = 16, + V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH = 17, }; #define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_HEIGHT (V4L2_CID_MPEG_BASE+364) #define V4L2_CID_MPEG_VIDEO_H264_VUI_EXT_SAR_WIDTH (V4L2_CID_MPEG_BASE+365) @@ -918,6 +923,13 @@ enum v4l2_auto_focus_range { #define V4L2_CID_PAN_SPEED (V4L2_CID_CAMERA_CLASS_BASE+32) #define V4L2_CID_TILT_SPEED (V4L2_CID_CAMERA_CLASS_BASE+33) +#define V4L2_CID_CAMERA_ORIENTATION (V4L2_CID_CAMERA_CLASS_BASE+34) +#define V4L2_CAMERA_ORIENTATION_FRONT 0 +#define V4L2_CAMERA_ORIENTATION_BACK 1 +#define V4L2_CAMERA_ORIENTATION_EXTERNAL 2 + +#define V4L2_CID_CAMERA_SENSOR_ROTATION (V4L2_CID_CAMERA_CLASS_BASE+35) + /* FM Modulator class control IDs */ #define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900) diff --git a/include/uapi/linux/v4l2-subdev.h b/include/uapi/linux/v4l2-subdev.h index 03970ce30741..5d2a1dab7911 100644 --- a/include/uapi/linux/v4l2-subdev.h +++ b/include/uapi/linux/v4l2-subdev.h @@ -155,9 +155,25 @@ struct v4l2_subdev_selection { __u32 reserved[8]; }; +/** + * struct v4l2_subdev_capability - subdev capabilities + * @version: the driver versioning number + * @capabilities: the subdev capabilities, see V4L2_SUBDEV_CAP_* + * @reserved: for future use, set to zero for now + */ +struct v4l2_subdev_capability { + __u32 version; + __u32 capabilities; + __u32 reserved[14]; +}; + +/* The v4l2 sub-device video device node is registered in read-only mode. */ +#define V4L2_SUBDEV_CAP_RO_SUBDEV BIT(0) + /* Backwards compatibility define --- to be removed */ #define v4l2_subdev_edid v4l2_edid +#define VIDIOC_SUBDEV_QUERYCAP _IOR('V', 0, struct v4l2_subdev_capability) #define VIDIOC_SUBDEV_G_FMT _IOWR('V', 4, struct v4l2_subdev_format) #define VIDIOC_SUBDEV_S_FMT _IOWR('V', 5, struct v4l2_subdev_format) #define VIDIOC_SUBDEV_G_FRAME_INTERVAL _IOWR('V', 21, struct v4l2_subdev_frame_interval) diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 015516bcfaa3..fde4692a6989 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -305,6 +305,7 @@ struct vfio_region_info_cap_type { #define VFIO_REGION_TYPE_PCI_VENDOR_MASK (0xffff) #define VFIO_REGION_TYPE_GFX (1) #define VFIO_REGION_TYPE_CCW (2) +#define VFIO_REGION_TYPE_MIGRATION (3) /* sub-types for VFIO_REGION_TYPE_PCI_* */ @@ -379,6 +380,233 @@ struct vfio_region_gfx_edid { /* sub-types for VFIO_REGION_TYPE_CCW */ #define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD (1) +/* sub-types for VFIO_REGION_TYPE_MIGRATION */ +#define VFIO_REGION_SUBTYPE_MIGRATION (1) + +/* + * The structure vfio_device_migration_info is placed at the 0th offset of + * the VFIO_REGION_SUBTYPE_MIGRATION region to get and set VFIO device related + * migration information. Field accesses from this structure are only supported + * at their native width and alignment. Otherwise, the result is undefined and + * vendor drivers should return an error. + * + * device_state: (read/write) + * - The user application writes to this field to inform the vendor driver + * about the device state to be transitioned to. + * - The vendor driver should take the necessary actions to change the + * device state. After successful transition to a given state, the + * vendor driver should return success on write(device_state, state) + * system call. If the device state transition fails, the vendor driver + * should return an appropriate -errno for the fault condition. + * - On the user application side, if the device state transition fails, + * that is, if write(device_state, state) returns an error, read + * device_state again to determine the current state of the device from + * the vendor driver. + * - The vendor driver should return previous state of the device unless + * the vendor driver has encountered an internal error, in which case + * the vendor driver may report the device_state VFIO_DEVICE_STATE_ERROR. + * - The user application must use the device reset ioctl to recover the + * device from VFIO_DEVICE_STATE_ERROR state. If the device is + * indicated to be in a valid device state by reading device_state, the + * user application may attempt to transition the device to any valid + * state reachable from the current state or terminate itself. + * + * device_state consists of 3 bits: + * - If bit 0 is set, it indicates the _RUNNING state. If bit 0 is clear, + * it indicates the _STOP state. When the device state is changed to + * _STOP, driver should stop the device before write() returns. + * - If bit 1 is set, it indicates the _SAVING state, which means that the + * driver should start gathering device state information that will be + * provided to the VFIO user application to save the device's state. + * - If bit 2 is set, it indicates the _RESUMING state, which means that + * the driver should prepare to resume the device. Data provided through + * the migration region should be used to resume the device. + * Bits 3 - 31 are reserved for future use. To preserve them, the user + * application should perform a read-modify-write operation on this + * field when modifying the specified bits. + * + * +------- _RESUMING + * |+------ _SAVING + * ||+----- _RUNNING + * ||| + * 000b => Device Stopped, not saving or resuming + * 001b => Device running, which is the default state + * 010b => Stop the device & save the device state, stop-and-copy state + * 011b => Device running and save the device state, pre-copy state + * 100b => Device stopped and the device state is resuming + * 101b => Invalid state + * 110b => Error state + * 111b => Invalid state + * + * State transitions: + * + * _RESUMING _RUNNING Pre-copy Stop-and-copy _STOP + * (100b) (001b) (011b) (010b) (000b) + * 0. Running or default state + * | + * + * 1. Normal Shutdown (optional) + * |------------------------------------->| + * + * 2. Save the state or suspend + * |------------------------->|---------->| + * + * 3. Save the state during live migration + * |----------->|------------>|---------->| + * + * 4. Resuming + * |<---------| + * + * 5. Resumed + * |--------->| + * + * 0. Default state of VFIO device is _RUNNNG when the user application starts. + * 1. During normal shutdown of the user application, the user application may + * optionally change the VFIO device state from _RUNNING to _STOP. This + * transition is optional. The vendor driver must support this transition but + * must not require it. + * 2. When the user application saves state or suspends the application, the + * device state transitions from _RUNNING to stop-and-copy and then to _STOP. + * On state transition from _RUNNING to stop-and-copy, driver must stop the + * device, save the device state and send it to the application through the + * migration region. The sequence to be followed for such transition is given + * below. + * 3. In live migration of user application, the state transitions from _RUNNING + * to pre-copy, to stop-and-copy, and to _STOP. + * On state transition from _RUNNING to pre-copy, the driver should start + * gathering the device state while the application is still running and send + * the device state data to application through the migration region. + * On state transition from pre-copy to stop-and-copy, the driver must stop + * the device, save the device state and send it to the user application + * through the migration region. + * Vendor drivers must support the pre-copy state even for implementations + * where no data is provided to the user before the stop-and-copy state. The + * user must not be required to consume all migration data before the device + * transitions to a new state, including the stop-and-copy state. + * The sequence to be followed for above two transitions is given below. + * 4. To start the resuming phase, the device state should be transitioned from + * the _RUNNING to the _RESUMING state. + * In the _RESUMING state, the driver should use the device state data + * received through the migration region to resume the device. + * 5. After providing saved device data to the driver, the application should + * change the state from _RESUMING to _RUNNING. + * + * reserved: + * Reads on this field return zero and writes are ignored. + * + * pending_bytes: (read only) + * The number of pending bytes still to be migrated from the vendor driver. + * + * data_offset: (read only) + * The user application should read data_offset field from the migration + * region. The user application should read the device data from this + * offset within the migration region during the _SAVING state or write + * the device data during the _RESUMING state. See below for details of + * sequence to be followed. + * + * data_size: (read/write) + * The user application should read data_size to get the size in bytes of + * the data copied in the migration region during the _SAVING state and + * write the size in bytes of the data copied in the migration region + * during the _RESUMING state. + * + * The format of the migration region is as follows: + * ------------------------------------------------------------------ + * |vfio_device_migration_info| data section | + * | | /////////////////////////////// | + * ------------------------------------------------------------------ + * ^ ^ + * offset 0-trapped part data_offset + * + * The structure vfio_device_migration_info is always followed by the data + * section in the region, so data_offset will always be nonzero. The offset + * from where the data is copied is decided by the kernel driver. The data + * section can be trapped, mmapped, or partitioned, depending on how the kernel + * driver defines the data section. The data section partition can be defined + * as mapped by the sparse mmap capability. If mmapped, data_offset must be + * page aligned, whereas initial section which contains the + * vfio_device_migration_info structure, might not end at the offset, which is + * page aligned. The user is not required to access through mmap regardless + * of the capabilities of the region mmap. + * The vendor driver should determine whether and how to partition the data + * section. The vendor driver should return data_offset accordingly. + * + * The sequence to be followed while in pre-copy state and stop-and-copy state + * is as follows: + * a. Read pending_bytes, indicating the start of a new iteration to get device + * data. Repeated read on pending_bytes at this stage should have no side + * effects. + * If pending_bytes == 0, the user application should not iterate to get data + * for that device. + * If pending_bytes > 0, perform the following steps. + * b. Read data_offset, indicating that the vendor driver should make data + * available through the data section. The vendor driver should return this + * read operation only after data is available from (region + data_offset) + * to (region + data_offset + data_size). + * c. Read data_size, which is the amount of data in bytes available through + * the migration region. + * Read on data_offset and data_size should return the offset and size of + * the current buffer if the user application reads data_offset and + * data_size more than once here. + * d. Read data_size bytes of data from (region + data_offset) from the + * migration region. + * e. Process the data. + * f. Read pending_bytes, which indicates that the data from the previous + * iteration has been read. If pending_bytes > 0, go to step b. + * + * The user application can transition from the _SAVING|_RUNNING + * (pre-copy state) to the _SAVING (stop-and-copy) state regardless of the + * number of pending bytes. The user application should iterate in _SAVING + * (stop-and-copy) until pending_bytes is 0. + * + * The sequence to be followed while _RESUMING device state is as follows: + * While data for this device is available, repeat the following steps: + * a. Read data_offset from where the user application should write data. + * b. Write migration data starting at the migration region + data_offset for + * the length determined by data_size from the migration source. + * c. Write data_size, which indicates to the vendor driver that data is + * written in the migration region. Vendor driver must return this write + * operations on consuming data. Vendor driver should apply the + * user-provided migration region data to the device resume state. + * + * If an error occurs during the above sequences, the vendor driver can return + * an error code for next read() or write() operation, which will terminate the + * loop. The user application should then take the next necessary action, for + * example, failing migration or terminating the user application. + * + * For the user application, data is opaque. The user application should write + * data in the same order as the data is received and the data should be of + * same transaction size at the source. + */ + +struct vfio_device_migration_info { + __u32 device_state; /* VFIO device state */ +#define VFIO_DEVICE_STATE_STOP (0) +#define VFIO_DEVICE_STATE_RUNNING (1 << 0) +#define VFIO_DEVICE_STATE_SAVING (1 << 1) +#define VFIO_DEVICE_STATE_RESUMING (1 << 2) +#define VFIO_DEVICE_STATE_MASK (VFIO_DEVICE_STATE_RUNNING | \ + VFIO_DEVICE_STATE_SAVING | \ + VFIO_DEVICE_STATE_RESUMING) + +#define VFIO_DEVICE_STATE_VALID(state) \ + (state & VFIO_DEVICE_STATE_RESUMING ? \ + (state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_RESUMING : 1) + +#define VFIO_DEVICE_STATE_IS_ERROR(state) \ + ((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_SAVING | \ + VFIO_DEVICE_STATE_RESUMING)) + +#define VFIO_DEVICE_STATE_SET_ERROR(state) \ + ((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_SATE_SAVING | \ + VFIO_DEVICE_STATE_RESUMING) + + __u32 reserved; + __u64 pending_bytes; + __u64 data_offset; + __u64 data_size; +}; + /* * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped * which allows direct access to non-MSIX registers which happened to be within @@ -785,6 +1013,29 @@ struct vfio_iommu_type1_info_cap_iova_range { struct vfio_iova_range iova_ranges[]; }; +/* + * The migration capability allows to report supported features for migration. + * + * The structures below define version 1 of this capability. + * + * The existence of this capability indicates that IOMMU kernel driver supports + * dirty page logging. + * + * pgsize_bitmap: Kernel driver returns bitmap of supported page sizes for dirty + * page logging. + * max_dirty_bitmap_size: Kernel driver returns maximum supported dirty bitmap + * size in bytes that can be used by user applications when getting the dirty + * bitmap. + */ +#define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION 1 + +struct vfio_iommu_type1_info_cap_migration { + struct vfio_info_cap_header header; + __u32 flags; + __u64 pgsize_bitmap; + __u64 max_dirty_bitmap_size; /* in bytes */ +}; + #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) /** @@ -805,6 +1056,12 @@ struct vfio_iommu_type1_dma_map { #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) +struct vfio_bitmap { + __u64 pgsize; /* page size for bitmap in bytes */ + __u64 size; /* in bytes */ + __u64 __user *data; /* one bit per page */ +}; + /** * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14, * struct vfio_dma_unmap) @@ -814,12 +1071,23 @@ struct vfio_iommu_type1_dma_map { * field. No guarantee is made to the user that arbitrary unmaps of iova * or size different from those used in the original mapping call will * succeed. + * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap + * before unmapping IO virtual addresses. When this flag is set, the user must + * provide a struct vfio_bitmap in data[]. User must provide zero-allocated + * memory via vfio_bitmap.data and its size in the vfio_bitmap.size field. + * A bit in the bitmap represents one page, of user provided page size in + * vfio_bitmap.pgsize field, consecutively starting from iova offset. Bit set + * indicates that the page at that offset from iova is dirty. A Bitmap of the + * pages in the range of unmapped size is returned in the user-provided + * vfio_bitmap.data. */ struct vfio_iommu_type1_dma_unmap { __u32 argsz; __u32 flags; +#define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0) __u64 iova; /* IO virtual address */ __u64 size; /* Size of mapping (bytes) */ + __u8 data[]; }; #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) @@ -831,6 +1099,57 @@ struct vfio_iommu_type1_dma_unmap { #define VFIO_IOMMU_ENABLE _IO(VFIO_TYPE, VFIO_BASE + 15) #define VFIO_IOMMU_DISABLE _IO(VFIO_TYPE, VFIO_BASE + 16) +/** + * VFIO_IOMMU_DIRTY_PAGES - _IOWR(VFIO_TYPE, VFIO_BASE + 17, + * struct vfio_iommu_type1_dirty_bitmap) + * IOCTL is used for dirty pages logging. + * Caller should set flag depending on which operation to perform, details as + * below: + * + * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_START flag set, instructs + * the IOMMU driver to log pages that are dirtied or potentially dirtied by + * the device; designed to be used when a migration is in progress. Dirty pages + * are logged until logging is disabled by user application by calling the IOCTL + * with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag. + * + * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag set, instructs + * the IOMMU driver to stop logging dirtied pages. + * + * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP flag set + * returns the dirty pages bitmap for IOMMU container for a given IOVA range. + * The user must specify the IOVA range and the pgsize through the structure + * vfio_iommu_type1_dirty_bitmap_get in the data[] portion. This interface + * supports getting a bitmap of the smallest supported pgsize only and can be + * modified in future to get a bitmap of any specified supported pgsize. The + * user must provide a zeroed memory area for the bitmap memory and specify its + * size in bitmap.size. One bit is used to represent one page consecutively + * starting from iova offset. The user should provide page size in bitmap.pgsize + * field. A bit set in the bitmap indicates that the page at that offset from + * iova is dirty. The caller must set argsz to a value including the size of + * structure vfio_iommu_type1_dirty_bitmap_get, but excluding the size of the + * actual bitmap. If dirty pages logging is not enabled, an error will be + * returned. + * + * Only one of the flags _START, _STOP and _GET may be specified at a time. + * + */ +struct vfio_iommu_type1_dirty_bitmap { + __u32 argsz; + __u32 flags; +#define VFIO_IOMMU_DIRTY_PAGES_FLAG_START (1 << 0) +#define VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP (1 << 1) +#define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP (1 << 2) + __u8 data[]; +}; + +struct vfio_iommu_type1_dirty_bitmap_get { + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of iova range */ + struct vfio_bitmap bitmap; +}; + +#define VFIO_IOMMU_DIRTY_PAGES _IO(VFIO_TYPE, VFIO_BASE + 17) + /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */ /* diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 9817b7e2c968..c3a1cf1c507f 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -487,6 +487,8 @@ struct v4l2_capability { #define V4L2_CAP_TOUCH 0x10000000 /* Is a touch device */ +#define V4L2_CAP_IO_MC 0x20000000 /* Is input/output controlled by the media controller */ + #define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */ /* @@ -782,7 +784,8 @@ struct v4l2_fmtdesc { __u32 flags; __u8 description[32]; /* Description string */ __u32 pixelformat; /* Format fourcc */ - __u32 reserved[4]; + __u32 mbus_code; /* Media bus code */ + __u32 reserved[3]; }; #define V4L2_FMT_FLAG_COMPRESSED 0x0001 diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h index a2c006a364e0..24f3371ad826 100644 --- a/include/uapi/linux/wireless.h +++ b/include/uapi/linux/wireless.h @@ -74,7 +74,11 @@ #include <linux/socket.h> /* for "struct sockaddr" et al */ #include <linux/if.h> /* for IFNAMSIZ and co... */ -#include <stddef.h> /* for offsetof */ +#ifdef __KERNEL__ +# include <linux/stddef.h> /* for offsetof */ +#else +# include <stddef.h> /* for offsetof */ +#endif /***************************** VERSION *****************************/ /* diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 5f3b9fec7b5f..ff7cfdc6cb44 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -304,7 +304,7 @@ enum xfrm_attr_type_t { XFRMA_PROTO, /* __u8 */ XFRMA_ADDRESS_FILTER, /* struct xfrm_address_filter */ XFRMA_PAD, - XFRMA_OFFLOAD_DEV, /* struct xfrm_state_offload */ + XFRMA_OFFLOAD_DEV, /* struct xfrm_user_offload */ XFRMA_SET_MARK, /* __u32 */ XFRMA_SET_MARK_MASK, /* __u32 */ XFRMA_IF_ID, /* __u32 */ diff --git a/include/uapi/rdma/hfi/hfi1_user.h b/include/uapi/rdma/hfi/hfi1_user.h index 01ac5853d9ac..d95ef9a2b032 100644 --- a/include/uapi/rdma/hfi/hfi1_user.h +++ b/include/uapi/rdma/hfi/hfi1_user.h @@ -6,7 +6,7 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2015 - 2018 Intel Corporation. + * Copyright(c) 2015 - 2020 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -109,6 +109,7 @@ #define HFI1_CAP_OPFN (1UL << 16) /* Enable the OPFN protocol */ #define HFI1_CAP_SDMA_HEAD_CHECK (1UL << 17) /* SDMA head checking */ #define HFI1_CAP_EARLY_CREDIT_RETURN (1UL << 18) /* early credit return */ +#define HFI1_CAP_AIP (1UL << 19) /* Enable accelerated IP */ #define HFI1_RCVHDR_ENTSIZE_2 (1UL << 0) #define HFI1_RCVHDR_ENTSIZE_16 (1UL << 1) diff --git a/include/uapi/rdma/ib_user_ioctl_cmds.h b/include/uapi/rdma/ib_user_ioctl_cmds.h index d4ddbe4e696c..4961d5e858eb 100644 --- a/include/uapi/rdma/ib_user_ioctl_cmds.h +++ b/include/uapi/rdma/ib_user_ioctl_cmds.h @@ -95,6 +95,7 @@ enum uverbs_attrs_create_cq_cmd_attr_ids { UVERBS_ATTR_CREATE_CQ_COMP_VECTOR, UVERBS_ATTR_CREATE_CQ_FLAGS, UVERBS_ATTR_CREATE_CQ_RESP_CQE, + UVERBS_ATTR_CREATE_CQ_EVENT_FD, }; enum uverbs_attrs_destroy_cq_cmd_attr_ids { @@ -120,11 +121,91 @@ enum uverbs_attrs_destroy_flow_action_esp { UVERBS_ATTR_DESTROY_FLOW_ACTION_HANDLE, }; +enum uverbs_attrs_create_qp_cmd_attr_ids { + UVERBS_ATTR_CREATE_QP_HANDLE, + UVERBS_ATTR_CREATE_QP_XRCD_HANDLE, + UVERBS_ATTR_CREATE_QP_PD_HANDLE, + UVERBS_ATTR_CREATE_QP_SRQ_HANDLE, + UVERBS_ATTR_CREATE_QP_SEND_CQ_HANDLE, + UVERBS_ATTR_CREATE_QP_RECV_CQ_HANDLE, + UVERBS_ATTR_CREATE_QP_IND_TABLE_HANDLE, + UVERBS_ATTR_CREATE_QP_USER_HANDLE, + UVERBS_ATTR_CREATE_QP_CAP, + UVERBS_ATTR_CREATE_QP_TYPE, + UVERBS_ATTR_CREATE_QP_FLAGS, + UVERBS_ATTR_CREATE_QP_SOURCE_QPN, + UVERBS_ATTR_CREATE_QP_EVENT_FD, + UVERBS_ATTR_CREATE_QP_RESP_CAP, + UVERBS_ATTR_CREATE_QP_RESP_QP_NUM, +}; + +enum uverbs_attrs_destroy_qp_cmd_attr_ids { + UVERBS_ATTR_DESTROY_QP_HANDLE, + UVERBS_ATTR_DESTROY_QP_RESP, +}; + +enum uverbs_methods_qp { + UVERBS_METHOD_QP_CREATE, + UVERBS_METHOD_QP_DESTROY, +}; + +enum uverbs_attrs_create_srq_cmd_attr_ids { + UVERBS_ATTR_CREATE_SRQ_HANDLE, + UVERBS_ATTR_CREATE_SRQ_PD_HANDLE, + UVERBS_ATTR_CREATE_SRQ_XRCD_HANDLE, + UVERBS_ATTR_CREATE_SRQ_CQ_HANDLE, + UVERBS_ATTR_CREATE_SRQ_USER_HANDLE, + UVERBS_ATTR_CREATE_SRQ_MAX_WR, + UVERBS_ATTR_CREATE_SRQ_MAX_SGE, + UVERBS_ATTR_CREATE_SRQ_LIMIT, + UVERBS_ATTR_CREATE_SRQ_MAX_NUM_TAGS, + UVERBS_ATTR_CREATE_SRQ_TYPE, + UVERBS_ATTR_CREATE_SRQ_EVENT_FD, + UVERBS_ATTR_CREATE_SRQ_RESP_MAX_WR, + UVERBS_ATTR_CREATE_SRQ_RESP_MAX_SGE, + UVERBS_ATTR_CREATE_SRQ_RESP_SRQ_NUM, +}; + +enum uverbs_attrs_destroy_srq_cmd_attr_ids { + UVERBS_ATTR_DESTROY_SRQ_HANDLE, + UVERBS_ATTR_DESTROY_SRQ_RESP, +}; + +enum uverbs_methods_srq { + UVERBS_METHOD_SRQ_CREATE, + UVERBS_METHOD_SRQ_DESTROY, +}; + enum uverbs_methods_cq { UVERBS_METHOD_CQ_CREATE, UVERBS_METHOD_CQ_DESTROY, }; +enum uverbs_attrs_create_wq_cmd_attr_ids { + UVERBS_ATTR_CREATE_WQ_HANDLE, + UVERBS_ATTR_CREATE_WQ_PD_HANDLE, + UVERBS_ATTR_CREATE_WQ_CQ_HANDLE, + UVERBS_ATTR_CREATE_WQ_USER_HANDLE, + UVERBS_ATTR_CREATE_WQ_TYPE, + UVERBS_ATTR_CREATE_WQ_EVENT_FD, + UVERBS_ATTR_CREATE_WQ_MAX_WR, + UVERBS_ATTR_CREATE_WQ_MAX_SGE, + UVERBS_ATTR_CREATE_WQ_FLAGS, + UVERBS_ATTR_CREATE_WQ_RESP_MAX_WR, + UVERBS_ATTR_CREATE_WQ_RESP_MAX_SGE, + UVERBS_ATTR_CREATE_WQ_RESP_WQ_NUM, +}; + +enum uverbs_attrs_destroy_wq_cmd_attr_ids { + UVERBS_ATTR_DESTROY_WQ_HANDLE, + UVERBS_ATTR_DESTROY_WQ_RESP, +}; + +enum uverbs_methods_wq { + UVERBS_METHOD_WQ_CREATE, + UVERBS_METHOD_WQ_DESTROY, +}; + enum uverbs_methods_actions_flow_action_ops { UVERBS_METHOD_FLOW_ACTION_ESP_CREATE, UVERBS_METHOD_FLOW_ACTION_DESTROY, diff --git a/include/uapi/rdma/ib_user_ioctl_verbs.h b/include/uapi/rdma/ib_user_ioctl_verbs.h index a640bb814be0..5debab45ebcb 100644 --- a/include/uapi/rdma/ib_user_ioctl_verbs.h +++ b/include/uapi/rdma/ib_user_ioctl_verbs.h @@ -64,6 +64,41 @@ enum ib_uverbs_access_flags { ~(IB_UVERBS_ACCESS_OPTIONAL_FIRST - 1) }; +enum ib_uverbs_srq_type { + IB_UVERBS_SRQT_BASIC, + IB_UVERBS_SRQT_XRC, + IB_UVERBS_SRQT_TM, +}; + +enum ib_uverbs_wq_type { + IB_UVERBS_WQT_RQ, +}; + +enum ib_uverbs_wq_flags { + IB_UVERBS_WQ_FLAGS_CVLAN_STRIPPING = 1 << 0, + IB_UVERBS_WQ_FLAGS_SCATTER_FCS = 1 << 1, + IB_UVERBS_WQ_FLAGS_DELAY_DROP = 1 << 2, + IB_UVERBS_WQ_FLAGS_PCI_WRITE_END_PADDING = 1 << 3, +}; + +enum ib_uverbs_qp_type { + IB_UVERBS_QPT_RC = 2, + IB_UVERBS_QPT_UC, + IB_UVERBS_QPT_UD, + IB_UVERBS_QPT_RAW_PACKET = 8, + IB_UVERBS_QPT_XRC_INI, + IB_UVERBS_QPT_XRC_TGT, + IB_UVERBS_QPT_DRIVER = 0xFF, +}; + +enum ib_uverbs_qp_create_flags { + IB_UVERBS_QP_CREATE_BLOCK_MULTICAST_LOOPBACK = 1 << 1, + IB_UVERBS_QP_CREATE_SCATTER_FCS = 1 << 8, + IB_UVERBS_QP_CREATE_CVLAN_STRIPPING = 1 << 9, + IB_UVERBS_QP_CREATE_PCI_WRITE_END_PADDING = 1 << 11, + IB_UVERBS_QP_CREATE_SQ_SIG_ALL = 1 << 12, +}; + enum ib_uverbs_query_port_cap_flags { IB_UVERBS_PCF_SM = 1 << 1, IB_UVERBS_PCF_NOTICE_SUP = 1 << 2, @@ -185,6 +220,14 @@ struct ib_uverbs_query_port_resp_ex { __u8 reserved[6]; }; +struct ib_uverbs_qp_cap { + __u32 max_send_wr; + __u32 max_recv_wr; + __u32 max_send_sge; + __u32 max_recv_sge; + __u32 max_inline_data; +}; + enum rdma_driver_id { RDMA_DRIVER_UNKNOWN, RDMA_DRIVER_MLX5, diff --git a/include/uapi/rdma/mlx5-abi.h b/include/uapi/rdma/mlx5-abi.h index df1cc3641bda..27905a0268c9 100644 --- a/include/uapi/rdma/mlx5-abi.h +++ b/include/uapi/rdma/mlx5-abi.h @@ -100,6 +100,7 @@ struct mlx5_ib_alloc_ucontext_req_v2 { enum mlx5_ib_alloc_ucontext_resp_mask { MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_CORE_CLOCK_OFFSET = 1UL << 0, MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_DUMP_FILL_MKEY = 1UL << 1, + MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_ECE = 1UL << 2, }; enum mlx5_user_cmds_supp_uhw { @@ -322,6 +323,8 @@ struct mlx5_ib_create_qp { __aligned_u64 sq_buf_addr; __aligned_u64 access_key; }; + __u32 ece_options; + __u32 reserved; }; /* RX Hash function flags */ @@ -371,7 +374,7 @@ enum mlx5_ib_create_qp_resp_mask { struct mlx5_ib_create_qp_resp { __u32 bfreg_index; - __u32 reserved; + __u32 ece_options; __u32 comp_mask; __u32 tirn; __u32 tisn; @@ -420,12 +423,14 @@ struct mlx5_ib_burst_info { struct mlx5_ib_modify_qp { __u32 comp_mask; struct mlx5_ib_burst_info burst_info; - __u32 reserved; + __u32 ece_options; }; struct mlx5_ib_modify_qp_resp { __u32 response_length; __u32 dctn; + __u32 ece_options; + __u32 reserved; }; struct mlx5_ib_create_wq_resp { diff --git a/include/uapi/rdma/mlx5_user_ioctl_cmds.h b/include/uapi/rdma/mlx5_user_ioctl_cmds.h index 24f3388c3182..8e316ef896b5 100644 --- a/include/uapi/rdma/mlx5_user_ioctl_cmds.h +++ b/include/uapi/rdma/mlx5_user_ioctl_cmds.h @@ -241,6 +241,11 @@ enum mlx5_ib_flow_type { MLX5_IB_FLOW_TYPE_MC_DEFAULT, }; +enum mlx5_ib_create_flow_flags { + MLX5_IB_ATTR_CREATE_FLOW_FLAGS_DEFAULT_MISS = 1 << 0, + MLX5_IB_ATTR_CREATE_FLOW_FLAGS_DROP = 1 << 1, +}; + enum mlx5_ib_create_flow_attrs { MLX5_IB_ATTR_CREATE_FLOW_HANDLE = (1U << UVERBS_ID_NS_SHIFT), MLX5_IB_ATTR_CREATE_FLOW_MATCH_VALUE, @@ -251,6 +256,7 @@ enum mlx5_ib_create_flow_attrs { MLX5_IB_ATTR_CREATE_FLOW_TAG, MLX5_IB_ATTR_CREATE_FLOW_ARR_COUNTERS_DEVX, MLX5_IB_ATTR_CREATE_FLOW_ARR_COUNTERS_DEVX_OFFSET, + MLX5_IB_ATTR_CREATE_FLOW_FLAGS, }; enum mlx5_ib_destoy_flow_attrs { diff --git a/include/uapi/rdma/rdma_user_cm.h b/include/uapi/rdma/rdma_user_cm.h index e42940a215a3..ed5a514305c1 100644 --- a/include/uapi/rdma/rdma_user_cm.h +++ b/include/uapi/rdma/rdma_user_cm.h @@ -164,6 +164,8 @@ struct rdma_ucm_query_route_resp { __u32 num_paths; __u8 port_num; __u8 reserved[3]; + __u32 ibdev_index; + __u32 reserved1; }; struct rdma_ucm_query_addr_resp { @@ -175,6 +177,8 @@ struct rdma_ucm_query_addr_resp { __u16 dst_size; struct __kernel_sockaddr_storage src_addr; struct __kernel_sockaddr_storage dst_addr; + __u32 ibdev_index; + __u32 reserved1; }; struct rdma_ucm_query_path_resp { @@ -206,10 +210,16 @@ struct rdma_ucm_ud_param { __u8 reserved[7]; }; +struct rdma_ucm_ece { + __u32 vendor_id; + __u32 attr_mod; +}; + struct rdma_ucm_connect { struct rdma_ucm_conn_param conn_param; __u32 id; __u32 reserved; + struct rdma_ucm_ece ece; }; struct rdma_ucm_listen { @@ -222,12 +232,14 @@ struct rdma_ucm_accept { struct rdma_ucm_conn_param conn_param; __u32 id; __u32 reserved; + struct rdma_ucm_ece ece; }; struct rdma_ucm_reject { __u32 id; __u8 private_data_len; - __u8 reserved[3]; + __u8 reason; + __u8 reserved[2]; __u8 private_data[RDMA_MAX_PRIVATE_DATA]; }; @@ -287,6 +299,7 @@ struct rdma_ucm_event_resp { struct rdma_ucm_ud_param ud; } param; __u32 reserved; + struct rdma_ucm_ece ece; }; /* Option levels */ diff --git a/include/uapi/rdma/rdma_user_ioctl_cmds.h b/include/uapi/rdma/rdma_user_ioctl_cmds.h index 7b1ec806f8f9..38ab7accb7be 100644 --- a/include/uapi/rdma/rdma_user_ioctl_cmds.h +++ b/include/uapi/rdma/rdma_user_ioctl_cmds.h @@ -36,7 +36,7 @@ #include <linux/types.h> #include <linux/ioctl.h> -/* Documentation/ioctl/ioctl-number.rst */ +/* Documentation/userspace-api/ioctl/ioctl-number.rst */ #define RDMA_IOCTL_MAGIC 0x1b #define RDMA_VERBS_IOCTL \ _IOWR(RDMA_IOCTL_MAGIC, 1, struct ib_uverbs_ioctl_hdr) diff --git a/include/uapi/sound/skl-tplg-interface.h b/include/uapi/sound/skl-tplg-interface.h index 9eee32f5e407..a93c0decfdd5 100644 --- a/include/uapi/sound/skl-tplg-interface.h +++ b/include/uapi/sound/skl-tplg-interface.h @@ -18,6 +18,8 @@ */ #define SKL_CONTROL_TYPE_BYTE_TLV 0x100 #define SKL_CONTROL_TYPE_MIC_SELECT 0x102 +#define SKL_CONTROL_TYPE_MULTI_IO_SELECT 0x103 +#define SKL_CONTROL_TYPE_MULTI_IO_SELECT_DMIC 0x104 #define HDA_SST_CFG_MAX 900 /* size of copier cfg*/ #define MAX_IN_QUEUE 8 diff --git a/include/uapi/sound/sof/abi.h b/include/uapi/sound/sof/abi.h index 5995b79d6df1..d54be303090f 100644 --- a/include/uapi/sound/sof/abi.h +++ b/include/uapi/sound/sof/abi.h @@ -26,7 +26,7 @@ /* SOF ABI version major, minor and patch numbers */ #define SOF_ABI_MAJOR 3 -#define SOF_ABI_MINOR 13 +#define SOF_ABI_MINOR 16 #define SOF_ABI_PATCH 0 /* SOF ABI version number. Format within 32bit word is MMmmmppp */ diff --git a/include/uapi/sound/sof/tokens.h b/include/uapi/sound/sof/tokens.h index 2a25cd8da503..5941e2eb1588 100644 --- a/include/uapi/sound/sof/tokens.h +++ b/include/uapi/sound/sof/tokens.h @@ -126,4 +126,12 @@ #define SOF_TKN_MUTE_LED_USE 1300 #define SOF_TKN_MUTE_LED_DIRECTION 1301 +/* ALH */ +#define SOF_TKN_INTEL_ALH_RATE 1400 +#define SOF_TKN_INTEL_ALH_CH 1401 + +/* HDA */ +#define SOF_TKN_INTEL_HDA_RATE 1500 +#define SOF_TKN_INTEL_HDA_CH 1501 + #endif |