aboutsummaryrefslogtreecommitdiff
path: root/include/uapi
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi')
-rw-r--r--include/uapi/drm/Kbuild1
-rw-r--r--include/uapi/drm/drm.h3
-rw-r--r--include/uapi/drm/drm_mode.h16
-rw-r--r--include/uapi/drm/i915_drm.h49
-rw-r--r--include/uapi/drm/msm_drm.h207
-rw-r--r--include/uapi/drm/radeon_drm.h2
-rw-r--r--include/uapi/linux/Kbuild2
-rw-r--r--include/uapi/linux/can/gw.h9
-rw-r--r--include/uapi/linux/cifs/cifs_mount.h27
-rw-r--r--include/uapi/linux/cm4000_cs.h1
-rw-r--r--include/uapi/linux/dm-ioctl.h4
-rw-r--r--include/uapi/linux/dn.h3
-rw-r--r--include/uapi/linux/dqblk_xfs.h47
-rw-r--r--include/uapi/linux/elf-em.h2
-rw-r--r--include/uapi/linux/fib_rules.h4
-rw-r--r--include/uapi/linux/fiemap.h1
-rw-r--r--include/uapi/linux/icmpv6.h2
-rw-r--r--include/uapi/linux/if_bridge.h3
-rw-r--r--include/uapi/linux/if_link.h3
-rw-r--r--include/uapi/linux/if_packet.h1
-rw-r--r--include/uapi/linux/if_pppox.h2
-rw-r--r--include/uapi/linux/if_tun.h6
-rw-r--r--include/uapi/linux/in.h49
-rw-r--r--include/uapi/linux/in6.h36
-rw-r--r--include/uapi/linux/input.h2
-rw-r--r--include/uapi/linux/ip.h2
-rw-r--r--include/uapi/linux/ipv6.h3
-rw-r--r--include/uapi/linux/kvm.h1
-rw-r--r--include/uapi/linux/kvm_para.h1
-rw-r--r--include/uapi/linux/libc-compat.h103
-rw-r--r--include/uapi/linux/netfilter/Kbuild2
-rw-r--r--include/uapi/linux/netfilter/nf_conntrack_common.h3
-rw-r--r--include/uapi/linux/netfilter/nfnetlink_conntrack.h15
-rw-r--r--include/uapi/linux/netfilter/nfnetlink_queue.h1
-rw-r--r--include/uapi/linux/netfilter/xt_HMARK.h50
-rw-r--r--include/uapi/linux/netfilter/xt_SYNPROXY.h16
-rw-r--r--include/uapi/linux/netfilter/xt_rpfilter.h23
-rw-r--r--include/uapi/linux/netfilter_bridge/ebt_802_3.h5
-rw-r--r--include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h3
-rw-r--r--include/uapi/linux/nfc.h20
-rw-r--r--include/uapi/linux/nl80211.h199
-rw-r--r--include/uapi/linux/nvme.h477
-rw-r--r--include/uapi/linux/openvswitch.h26
-rw-r--r--include/uapi/linux/pci_regs.h113
-rw-r--r--include/uapi/linux/perf_event.h123
-rw-r--r--include/uapi/linux/pkt_sched.h41
-rw-r--r--include/uapi/linux/reiserfs_xattr.h2
-rw-r--r--include/uapi/linux/sctp.h2
-rw-r--r--include/uapi/linux/serial_core.h6
-rw-r--r--include/uapi/linux/snmp.h4
-rw-r--r--include/uapi/linux/tcp.h1
-rw-r--r--include/uapi/linux/uhid.h4
-rw-r--r--include/uapi/linux/v4l2-controls.h29
-rw-r--r--include/uapi/linux/v4l2-dv-timings.h8
-rw-r--r--include/uapi/linux/v4l2-mediabus.h6
-rw-r--r--include/uapi/linux/vfio.h38
-rw-r--r--include/uapi/linux/videodev2.h12
-rw-r--r--include/uapi/linux/virtio_net.h6
-rw-r--r--include/uapi/linux/wimax/i2400m.h4
-rw-r--r--include/uapi/rdma/ib_user_verbs.h99
-rw-r--r--include/uapi/sound/hdspm.h2
61 files changed, 1784 insertions, 148 deletions
diff --git a/include/uapi/drm/Kbuild b/include/uapi/drm/Kbuild
index 119487e05e65..2d9a25daab05 100644
--- a/include/uapi/drm/Kbuild
+++ b/include/uapi/drm/Kbuild
@@ -16,3 +16,4 @@ header-y += sis_drm.h
header-y += tegra_drm.h
header-y += via_drm.h
header-y += vmwgfx_drm.h
+header-y += msm_drm.h
diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h
index 238a166b9fe6..ece867889cc7 100644
--- a/include/uapi/drm/drm.h
+++ b/include/uapi/drm/drm.h
@@ -181,7 +181,7 @@ enum drm_map_type {
_DRM_AGP = 3, /**< AGP/GART */
_DRM_SCATTER_GATHER = 4, /**< Scatter/gather memory for PCI DMA */
_DRM_CONSISTENT = 5, /**< Consistent memory for PCI DMA */
- _DRM_GEM = 6, /**< GEM object */
+ _DRM_GEM = 6, /**< GEM object (obsolete) */
};
/**
@@ -780,6 +780,7 @@ struct drm_event_vblank {
#define DRM_CAP_DUMB_PREFER_SHADOW 0x4
#define DRM_CAP_PRIME 0x5
#define DRM_CAP_TIMESTAMP_MONOTONIC 0x6
+#define DRM_CAP_ASYNC_PAGE_FLIP 0x7
#define DRM_PRIME_CAP_IMPORT 0x1
#define DRM_PRIME_CAP_EXPORT 0x2
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index 53db7cea373b..550811712f78 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -412,7 +412,8 @@ struct drm_mode_crtc_lut {
};
#define DRM_MODE_PAGE_FLIP_EVENT 0x01
-#define DRM_MODE_PAGE_FLIP_FLAGS DRM_MODE_PAGE_FLIP_EVENT
+#define DRM_MODE_PAGE_FLIP_ASYNC 0x02
+#define DRM_MODE_PAGE_FLIP_FLAGS (DRM_MODE_PAGE_FLIP_EVENT|DRM_MODE_PAGE_FLIP_ASYNC)
/*
* Request a page flip on the specified crtc.
@@ -426,11 +427,14 @@ struct drm_mode_crtc_lut {
* flip is already pending as the ioctl is called, EBUSY will be
* returned.
*
- * The ioctl supports one flag, DRM_MODE_PAGE_FLIP_EVENT, which will
- * request that drm sends back a vblank event (see drm.h: struct
- * drm_event_vblank) when the page flip is done. The user_data field
- * passed in with this ioctl will be returned as the user_data field
- * in the vblank event struct.
+ * Flag DRM_MODE_PAGE_FLIP_EVENT requests that drm sends back a vblank
+ * event (see drm.h: struct drm_event_vblank) when the page flip is
+ * done. The user_data field passed in with this ioctl will be
+ * returned as the user_data field in the vblank event struct.
+ *
+ * Flag DRM_MODE_PAGE_FLIP_ASYNC requests that the flip happen
+ * 'as soon as possible', meaning that it not delay waiting for vblank.
+ * This may cause tearing on the screen.
*
* The reserved field must be zero until we figure out something
* clever to use it for.
diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h
index 923ed7fe5775..55bb5729bd78 100644
--- a/include/uapi/drm/i915_drm.h
+++ b/include/uapi/drm/i915_drm.h
@@ -33,6 +33,30 @@
* subject to backwards-compatibility constraints.
*/
+/**
+ * DOC: uevents generated by i915 on it's device node
+ *
+ * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch
+ * event from the gpu l3 cache. Additional information supplied is ROW,
+ * BANK, SUBBANK of the affected cacheline. Userspace should keep track of
+ * these events and if a specific cache-line seems to have a persistent
+ * error remap it with the l3 remapping tool supplied in intel-gpu-tools.
+ * The value supplied with the event is always 1.
+ *
+ * I915_ERROR_UEVENT - Generated upon error detection, currently only via
+ * hangcheck. The error detection event is a good indicator of when things
+ * began to go badly. The value supplied with the event is a 1 upon error
+ * detection, and a 0 upon reset completion, signifying no more error
+ * exists. NOTE: Disabling hangcheck or reset via module parameter will
+ * cause the related events to not be seen.
+ *
+ * I915_RESET_UEVENT - Event is generated just before an attempt to reset the
+ * the GPU. The value supplied with the event is always 1. NOTE: Disable
+ * reset via module parameter will cause this event to not be seen.
+ */
+#define I915_L3_PARITY_UEVENT "L3_PARITY_ERROR"
+#define I915_ERROR_UEVENT "ERROR"
+#define I915_RESET_UEVENT "RESET"
/* Each region is a minimum of 16k, and there are at most 255 of them.
*/
@@ -310,6 +334,7 @@ typedef struct drm_i915_irq_wait {
#define I915_PARAM_HAS_PINNED_BATCHES 24
#define I915_PARAM_HAS_EXEC_NO_RELOC 25
#define I915_PARAM_HAS_EXEC_HANDLE_LUT 26
+#define I915_PARAM_HAS_WT 27
typedef struct drm_i915_getparam {
int param;
@@ -744,8 +769,32 @@ struct drm_i915_gem_busy {
__u32 busy;
};
+/**
+ * I915_CACHING_NONE
+ *
+ * GPU access is not coherent with cpu caches. Default for machines without an
+ * LLC.
+ */
#define I915_CACHING_NONE 0
+/**
+ * I915_CACHING_CACHED
+ *
+ * GPU access is coherent with cpu caches and furthermore the data is cached in
+ * last-level caches shared between cpu cores and the gpu GT. Default on
+ * machines with HAS_LLC.
+ */
#define I915_CACHING_CACHED 1
+/**
+ * I915_CACHING_DISPLAY
+ *
+ * Special GPU caching mode which is coherent with the scanout engines.
+ * Transparently falls back to I915_CACHING_NONE on platforms where no special
+ * cache mode (like write-through or gfdt flushing) is available. The kernel
+ * automatically sets this mode when using a buffer as a scanout target.
+ * Userspace can manually set this mode to avoid a costly stall and clflush in
+ * the hotpath of drawing the first frame.
+ */
+#define I915_CACHING_DISPLAY 2
struct drm_i915_gem_caching {
/**
diff --git a/include/uapi/drm/msm_drm.h b/include/uapi/drm/msm_drm.h
new file mode 100644
index 000000000000..d3c62074016d
--- /dev/null
+++ b/include/uapi/drm/msm_drm.h
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MSM_DRM_H__
+#define __MSM_DRM_H__
+
+#include <stddef.h>
+#include <drm/drm.h>
+
+/* Please note that modifications to all structs defined here are
+ * subject to backwards-compatibility constraints:
+ * 1) Do not use pointers, use uint64_t instead for 32 bit / 64 bit
+ * user/kernel compatibility
+ * 2) Keep fields aligned to their size
+ * 3) Because of how drm_ioctl() works, we can add new fields at
+ * the end of an ioctl if some care is taken: drm_ioctl() will
+ * zero out the new fields at the tail of the ioctl, so a zero
+ * value should have a backwards compatible meaning. And for
+ * output params, userspace won't see the newly added output
+ * fields.. so that has to be somehow ok.
+ */
+
+#define MSM_PIPE_NONE 0x00
+#define MSM_PIPE_2D0 0x01
+#define MSM_PIPE_2D1 0x02
+#define MSM_PIPE_3D0 0x10
+
+/* timeouts are specified in clock-monotonic absolute times (to simplify
+ * restarting interrupted ioctls). The following struct is logically the
+ * same as 'struct timespec' but 32/64b ABI safe.
+ */
+struct drm_msm_timespec {
+ int64_t tv_sec; /* seconds */
+ int64_t tv_nsec; /* nanoseconds */
+};
+
+#define MSM_PARAM_GPU_ID 0x01
+#define MSM_PARAM_GMEM_SIZE 0x02
+
+struct drm_msm_param {
+ uint32_t pipe; /* in, MSM_PIPE_x */
+ uint32_t param; /* in, MSM_PARAM_x */
+ uint64_t value; /* out (get_param) or in (set_param) */
+};
+
+/*
+ * GEM buffers:
+ */
+
+#define MSM_BO_SCANOUT 0x00000001 /* scanout capable */
+#define MSM_BO_GPU_READONLY 0x00000002
+#define MSM_BO_CACHE_MASK 0x000f0000
+/* cache modes */
+#define MSM_BO_CACHED 0x00010000
+#define MSM_BO_WC 0x00020000
+#define MSM_BO_UNCACHED 0x00040000
+
+struct drm_msm_gem_new {
+ uint64_t size; /* in */
+ uint32_t flags; /* in, mask of MSM_BO_x */
+ uint32_t handle; /* out */
+};
+
+struct drm_msm_gem_info {
+ uint32_t handle; /* in */
+ uint32_t pad;
+ uint64_t offset; /* out, offset to pass to mmap() */
+};
+
+#define MSM_PREP_READ 0x01
+#define MSM_PREP_WRITE 0x02
+#define MSM_PREP_NOSYNC 0x04
+
+struct drm_msm_gem_cpu_prep {
+ uint32_t handle; /* in */
+ uint32_t op; /* in, mask of MSM_PREP_x */
+ struct drm_msm_timespec timeout; /* in */
+};
+
+struct drm_msm_gem_cpu_fini {
+ uint32_t handle; /* in */
+};
+
+/*
+ * Cmdstream Submission:
+ */
+
+/* The value written into the cmdstream is logically:
+ *
+ * ((relocbuf->gpuaddr + reloc_offset) << shift) | or
+ *
+ * When we have GPU's w/ >32bit ptrs, it should be possible to deal
+ * with this by emit'ing two reloc entries with appropriate shift
+ * values. Or a new MSM_SUBMIT_CMD_x type would also be an option.
+ *
+ * NOTE that reloc's must be sorted by order of increasing submit_offset,
+ * otherwise EINVAL.
+ */
+struct drm_msm_gem_submit_reloc {
+ uint32_t submit_offset; /* in, offset from submit_bo */
+ uint32_t or; /* in, value OR'd with result */
+ int32_t shift; /* in, amount of left shift (can be negative) */
+ uint32_t reloc_idx; /* in, index of reloc_bo buffer */
+ uint64_t reloc_offset; /* in, offset from start of reloc_bo */
+};
+
+/* submit-types:
+ * BUF - this cmd buffer is executed normally.
+ * IB_TARGET_BUF - this cmd buffer is an IB target. Reloc's are
+ * processed normally, but the kernel does not setup an IB to
+ * this buffer in the first-level ringbuffer
+ * CTX_RESTORE_BUF - only executed if there has been a GPU context
+ * switch since the last SUBMIT ioctl
+ */
+#define MSM_SUBMIT_CMD_BUF 0x0001
+#define MSM_SUBMIT_CMD_IB_TARGET_BUF 0x0002
+#define MSM_SUBMIT_CMD_CTX_RESTORE_BUF 0x0003
+struct drm_msm_gem_submit_cmd {
+ uint32_t type; /* in, one of MSM_SUBMIT_CMD_x */
+ uint32_t submit_idx; /* in, index of submit_bo cmdstream buffer */
+ uint32_t submit_offset; /* in, offset into submit_bo */
+ uint32_t size; /* in, cmdstream size */
+ uint32_t pad;
+ uint32_t nr_relocs; /* in, number of submit_reloc's */
+ uint64_t __user relocs; /* in, ptr to array of submit_reloc's */
+};
+
+/* Each buffer referenced elsewhere in the cmdstream submit (ie. the
+ * cmdstream buffer(s) themselves or reloc entries) has one (and only
+ * one) entry in the submit->bos[] table.
+ *
+ * As a optimization, the current buffer (gpu virtual address) can be
+ * passed back through the 'presumed' field. If on a subsequent reloc,
+ * userspace passes back a 'presumed' address that is still valid,
+ * then patching the cmdstream for this entry is skipped. This can
+ * avoid kernel needing to map/access the cmdstream bo in the common
+ * case.
+ */
+#define MSM_SUBMIT_BO_READ 0x0001
+#define MSM_SUBMIT_BO_WRITE 0x0002
+struct drm_msm_gem_submit_bo {
+ uint32_t flags; /* in, mask of MSM_SUBMIT_BO_x */
+ uint32_t handle; /* in, GEM handle */
+ uint64_t presumed; /* in/out, presumed buffer address */
+};
+
+/* Each cmdstream submit consists of a table of buffers involved, and
+ * one or more cmdstream buffers. This allows for conditional execution
+ * (context-restore), and IB buffers needed for per tile/bin draw cmds.
+ */
+struct drm_msm_gem_submit {
+ uint32_t pipe; /* in, MSM_PIPE_x */
+ uint32_t fence; /* out */
+ uint32_t nr_bos; /* in, number of submit_bo's */
+ uint32_t nr_cmds; /* in, number of submit_cmd's */
+ uint64_t __user bos; /* in, ptr to array of submit_bo's */
+ uint64_t __user cmds; /* in, ptr to array of submit_cmd's */
+};
+
+/* The normal way to synchronize with the GPU is just to CPU_PREP on
+ * a buffer if you need to access it from the CPU (other cmdstream
+ * submission from same or other contexts, PAGE_FLIP ioctl, etc, all
+ * handle the required synchronization under the hood). This ioctl
+ * mainly just exists as a way to implement the gallium pipe_fence
+ * APIs without requiring a dummy bo to synchronize on.
+ */
+struct drm_msm_wait_fence {
+ uint32_t fence; /* in */
+ uint32_t pad;
+ struct drm_msm_timespec timeout; /* in */
+};
+
+#define DRM_MSM_GET_PARAM 0x00
+/* placeholder:
+#define DRM_MSM_SET_PARAM 0x01
+ */
+#define DRM_MSM_GEM_NEW 0x02
+#define DRM_MSM_GEM_INFO 0x03
+#define DRM_MSM_GEM_CPU_PREP 0x04
+#define DRM_MSM_GEM_CPU_FINI 0x05
+#define DRM_MSM_GEM_SUBMIT 0x06
+#define DRM_MSM_WAIT_FENCE 0x07
+#define DRM_MSM_NUM_IOCTLS 0x08
+
+#define DRM_IOCTL_MSM_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GET_PARAM, struct drm_msm_param)
+#define DRM_IOCTL_MSM_GEM_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_NEW, struct drm_msm_gem_new)
+#define DRM_IOCTL_MSM_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_INFO, struct drm_msm_gem_info)
+#define DRM_IOCTL_MSM_GEM_CPU_PREP DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_PREP, struct drm_msm_gem_cpu_prep)
+#define DRM_IOCTL_MSM_GEM_CPU_FINI DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_FINI, struct drm_msm_gem_cpu_fini)
+#define DRM_IOCTL_MSM_GEM_SUBMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_SUBMIT, struct drm_msm_gem_submit)
+#define DRM_IOCTL_MSM_WAIT_FENCE DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_WAIT_FENCE, struct drm_msm_wait_fence)
+
+#endif /* __MSM_DRM_H__ */
diff --git a/include/uapi/drm/radeon_drm.h b/include/uapi/drm/radeon_drm.h
index 321d4ac5c512..fa8b3adf9ffb 100644
--- a/include/uapi/drm/radeon_drm.h
+++ b/include/uapi/drm/radeon_drm.h
@@ -979,6 +979,8 @@ struct drm_radeon_cs {
#define RADEON_INFO_RING_WORKING 0x15
/* SI tile mode array */
#define RADEON_INFO_SI_TILE_MODE_ARRAY 0x16
+/* query if CP DMA is supported on the compute ring */
+#define RADEON_INFO_SI_CP_DMA_COMPUTE 0x17
struct drm_radeon_info {
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 997f9f2f0963..115add2515aa 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -227,6 +227,7 @@ header-y += kvm_para.h
endif
header-y += l2tp.h
+header-y += libc-compat.h
header-y += limits.h
header-y += llc.h
header-y += loop.h
@@ -283,6 +284,7 @@ header-y += nfs_mount.h
header-y += nfsacl.h
header-y += nl80211.h
header-y += nubus.h
+header-y += nvme.h
header-y += nvram.h
header-y += omap3isp.h
header-y += omapfb.h
diff --git a/include/uapi/linux/can/gw.h b/include/uapi/linux/can/gw.h
index ae07bec74f4b..4e27c82b564a 100644
--- a/include/uapi/linux/can/gw.h
+++ b/include/uapi/linux/can/gw.h
@@ -45,6 +45,7 @@ enum {
CGW_DST_IF, /* ifindex of destination network interface */
CGW_FILTER, /* specify struct can_filter on source CAN device */
CGW_DELETED, /* number of deleted CAN frames (see max_hops param) */
+ CGW_LIM_HOPS, /* limit the number of hops of this specific rule */
__CGW_MAX
};
@@ -116,13 +117,19 @@ enum {
* Sets a CAN receive filter for the gateway job specified by the
* struct can_filter described in include/linux/can.h
*
- * CGW_MOD_XXX (length 17 bytes):
+ * CGW_MOD_(AND|OR|XOR|SET) (length 17 bytes):
* Specifies a modification that's done to a received CAN frame before it is
* send out to the destination interface.
*
* <struct can_frame> data used as operator
* <u8> affected CAN frame elements
*
+ * CGW_LIM_HOPS (length 1 byte):
+ * Limit the number of hops of this specific rule. Usually the received CAN
+ * frame can be processed as much as 'max_hops' times (which is given at module
+ * load time of the can-gw module). This value is used to reduce the number of
+ * possible hops for this gateway rule to a value smaller then max_hops.
+ *
* CGW_CS_XOR (length 4 bytes):
* Set a simple XOR checksum starting with an initial value into
* data[result-idx] using data[start-idx] .. data[end-idx]
diff --git a/include/uapi/linux/cifs/cifs_mount.h b/include/uapi/linux/cifs/cifs_mount.h
new file mode 100644
index 000000000000..d7e4c6ce6171
--- /dev/null
+++ b/include/uapi/linux/cifs/cifs_mount.h
@@ -0,0 +1,27 @@
+/*
+ * include/uapi/linux/cifs/cifs_mount.h
+ *
+ * Author(s): Scott Lovenberg (scott.lovenberg@gmail.com)
+ *
+ * This library is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU Lesser General Public License for more details.
+ */
+#ifndef _CIFS_MOUNT_H
+#define _CIFS_MOUNT_H
+
+/* Max string lengths for cifs mounting options. */
+#define CIFS_MAX_DOMAINNAME_LEN 256 /* max fully qualified domain name */
+#define CIFS_MAX_USERNAME_LEN 256 /* reasonable max for current servers */
+#define CIFS_MAX_PASSWORD_LEN 512 /* Windows max seems to be 256 wide chars */
+#define CIFS_MAX_SHARE_LEN 256 /* reasonable max share name length */
+#define CIFS_NI_MAXHOST 1024 /* max host name length (256 * 4 bytes) */
+
+
+#endif /* _CIFS_MOUNT_H */
diff --git a/include/uapi/linux/cm4000_cs.h b/include/uapi/linux/cm4000_cs.h
index bc51f77db918..1217f751a1bc 100644
--- a/include/uapi/linux/cm4000_cs.h
+++ b/include/uapi/linux/cm4000_cs.h
@@ -2,6 +2,7 @@
#define _UAPI_CM4000_H_
#include <linux/types.h>
+#include <linux/ioctl.h>
#define MAX_ATR 33
diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h
index afd0cbd52edb..f1e12bd40b3b 100644
--- a/include/uapi/linux/dm-ioctl.h
+++ b/include/uapi/linux/dm-ioctl.h
@@ -267,9 +267,9 @@ enum {
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 25
+#define DM_VERSION_MINOR 26
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2013-06-26)"
+#define DM_VERSION_EXTRA "-ioctl (2013-08-15)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
diff --git a/include/uapi/linux/dn.h b/include/uapi/linux/dn.h
index 9c50445462d9..5fbdd3d49eba 100644
--- a/include/uapi/linux/dn.h
+++ b/include/uapi/linux/dn.h
@@ -2,6 +2,7 @@
#define _LINUX_DN_H
#include <linux/types.h>
+#include <linux/if_ether.h>
/*
@@ -120,7 +121,7 @@ struct linkinfo_dn {
* Ethernet address format (for DECnet)
*/
union etheraddress {
- __u8 dne_addr[6]; /* Full ethernet address */
+ __u8 dne_addr[ETH_ALEN]; /* Full ethernet address */
struct {
__u8 dne_hiord[4]; /* DECnet HIORD prefix */
__u8 dne_nodeaddr[2]; /* DECnet node address */
diff --git a/include/uapi/linux/dqblk_xfs.h b/include/uapi/linux/dqblk_xfs.h
index 86552807aed9..dcd75cc26196 100644
--- a/include/uapi/linux/dqblk_xfs.h
+++ b/include/uapi/linux/dqblk_xfs.h
@@ -38,6 +38,7 @@
#define Q_XGETQSTAT XQM_CMD(5) /* get quota subsystem status */
#define Q_XQUOTARM XQM_CMD(6) /* free disk space used by dquots */
#define Q_XQUOTASYNC XQM_CMD(7) /* delalloc flush, updates dquots */
+#define Q_XGETQSTATV XQM_CMD(8) /* newer version of get quota */
/*
* fs_disk_quota structure:
@@ -163,4 +164,50 @@ typedef struct fs_quota_stat {
__u16 qs_iwarnlimit; /* limit for num warnings */
} fs_quota_stat_t;
+/*
+ * fs_quota_statv is used by Q_XGETQSTATV for a given file system. It provides
+ * a centralized way to get meta information about the quota subsystem. eg.
+ * space taken up for user, group, and project quotas, number of dquots
+ * currently incore.
+ *
+ * This version has proper versioning support with appropriate padding for
+ * future expansions, and ability to expand for future without creating any
+ * backward compatibility issues.
+ *
+ * Q_XGETQSTATV uses the passed in value of the requested version via
+ * fs_quota_statv.qs_version to determine the return data layout of
+ * fs_quota_statv. The kernel will fill the data fields relevant to that
+ * version.
+ *
+ * If kernel does not support user space caller specified version, EINVAL will
+ * be returned. User space caller can then reduce the version number and retry
+ * the same command.
+ */
+#define FS_QSTATV_VERSION1 1 /* fs_quota_statv.qs_version */
+/*
+ * Some basic information about 'quota files' for Q_XGETQSTATV command
+ */
+struct fs_qfilestatv {
+ __u64 qfs_ino; /* inode number */
+ __u64 qfs_nblks; /* number of BBs 512-byte-blks */
+ __u32 qfs_nextents; /* number of extents */
+ __u32 qfs_pad; /* pad for 8-byte alignment */
+};
+
+struct fs_quota_statv {
+ __s8 qs_version; /* version for future changes */
+ __u8 qs_pad1; /* pad for 16bit alignment */
+ __u16 qs_flags; /* FS_QUOTA_.* flags */
+ __u32 qs_incoredqs; /* number of dquots incore */
+ struct fs_qfilestatv qs_uquota; /* user quota information */
+ struct fs_qfilestatv qs_gquota; /* group quota information */
+ struct fs_qfilestatv qs_pquota; /* project quota information */
+ __s32 qs_btimelimit; /* limit for blks timer */
+ __s32 qs_itimelimit; /* limit for inodes timer */
+ __s32 qs_rtbtimelimit;/* limit for rt blks timer */
+ __u16 qs_bwarnlimit; /* limit for num warnings */
+ __u16 qs_iwarnlimit; /* limit for num warnings */
+ __u64 qs_pad2[8]; /* for future proofing */
+};
+
#endif /* _LINUX_DQBLK_XFS_H */
diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h
index 8e2b7bac4378..59c17a2d38ad 100644
--- a/include/uapi/linux/elf-em.h
+++ b/include/uapi/linux/elf-em.h
@@ -22,6 +22,7 @@
#define EM_PPC 20 /* PowerPC */
#define EM_PPC64 21 /* PowerPC64 */
#define EM_SPU 23 /* Cell BE SPU */
+#define EM_ARM 40 /* ARM 32 bit */
#define EM_SH 42 /* SuperH */
#define EM_SPARCV9 43 /* SPARC v9 64-bit */
#define EM_IA_64 50 /* HP/Intel IA-64 */
@@ -34,6 +35,7 @@
#define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */
#define EM_BLACKFIN 106 /* ADI Blackfin Processor */
#define EM_TI_C6000 140 /* TI C6X DSPs */
+#define EM_AARCH64 183 /* ARM 64 bit */
#define EM_FRV 0x5441 /* Fujitsu FR-V */
#define EM_AVR32 0x18ad /* Atmel AVR32 */
diff --git a/include/uapi/linux/fib_rules.h b/include/uapi/linux/fib_rules.h
index 51da65b68b85..2b82d7e30974 100644
--- a/include/uapi/linux/fib_rules.h
+++ b/include/uapi/linux/fib_rules.h
@@ -44,8 +44,8 @@ enum {
FRA_FWMARK, /* mark */
FRA_FLOW, /* flow/class id */
FRA_UNUSED6,
- FRA_UNUSED7,
- FRA_UNUSED8,
+ FRA_SUPPRESS_IFGROUP,
+ FRA_SUPPRESS_PREFIXLEN,
FRA_TABLE, /* Extended table id */
FRA_FWMASK, /* mask for netfilter mark */
FRA_OIFNAME,
diff --git a/include/uapi/linux/fiemap.h b/include/uapi/linux/fiemap.h
index d830747f5c0b..0c51d617dae9 100644
--- a/include/uapi/linux/fiemap.h
+++ b/include/uapi/linux/fiemap.h
@@ -40,6 +40,7 @@ struct fiemap {
#define FIEMAP_FLAG_SYNC 0x00000001 /* sync file data before map */
#define FIEMAP_FLAG_XATTR 0x00000002 /* map extended attribute tree */
+#define FIEMAP_FLAG_CACHE 0x00000004 /* request caching of the extents */
#define FIEMAP_FLAGS_COMPAT (FIEMAP_FLAG_SYNC | FIEMAP_FLAG_XATTR)
diff --git a/include/uapi/linux/icmpv6.h b/include/uapi/linux/icmpv6.h
index e0133c73c304..590beda78ea0 100644
--- a/include/uapi/linux/icmpv6.h
+++ b/include/uapi/linux/icmpv6.h
@@ -115,6 +115,8 @@ struct icmp6hdr {
#define ICMPV6_NOT_NEIGHBOUR 2
#define ICMPV6_ADDR_UNREACH 3
#define ICMPV6_PORT_UNREACH 4
+#define ICMPV6_POLICY_FAIL 5
+#define ICMPV6_REJECT_ROUTE 6
/*
* Codes for Time Exceeded
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index 2d70d79ce2fd..39f621a9fe82 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -14,6 +14,7 @@
#define _UAPI_LINUX_IF_BRIDGE_H
#include <linux/types.h>
+#include <linux/if_ether.h>
#define SYSFS_BRIDGE_ATTR "bridge"
#define SYSFS_BRIDGE_FDB "brforward"
@@ -88,7 +89,7 @@ struct __port_info {
};
struct __fdb_entry {
- __u8 mac_addr[6];
+ __u8 mac_addr[ETH_ALEN];
__u8 port_no;
__u8 is_local;
__u32 ageing_timer_value;
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 03f6170ab337..80394e8dc3a3 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -143,6 +143,7 @@ enum {
IFLA_NUM_TX_QUEUES,
IFLA_NUM_RX_QUEUES,
IFLA_CARRIER,
+ IFLA_PHYS_PORT_ID,
__IFLA_MAX
};
@@ -313,6 +314,8 @@ enum {
IFLA_VXLAN_L2MISS,
IFLA_VXLAN_L3MISS,
IFLA_VXLAN_PORT, /* destination port */
+ IFLA_VXLAN_GROUP6,
+ IFLA_VXLAN_LOCAL6,
__IFLA_VXLAN_MAX
};
#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1)
diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h
index b950c02030c0..dbf06667394b 100644
--- a/include/uapi/linux/if_packet.h
+++ b/include/uapi/linux/if_packet.h
@@ -56,6 +56,7 @@ struct sockaddr_ll {
#define PACKET_FANOUT_LB 1
#define PACKET_FANOUT_CPU 2
#define PACKET_FANOUT_ROLLOVER 3
+#define PACKET_FANOUT_RND 4
#define PACKET_FANOUT_FLAG_ROLLOVER 0x1000
#define PACKET_FANOUT_FLAG_DEFRAG 0x8000
diff --git a/include/uapi/linux/if_pppox.h b/include/uapi/linux/if_pppox.h
index e36a4aecd311..e128769331b5 100644
--- a/include/uapi/linux/if_pppox.h
+++ b/include/uapi/linux/if_pppox.h
@@ -46,7 +46,7 @@ struct pppoe_addr {
* PPTP addressing definition
*/
struct pptp_addr {
- __be16 call_id;
+ __u16 call_id;
struct in_addr sin_addr;
};
diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h
index 82334f88967e..e9502dd1ee2c 100644
--- a/include/uapi/linux/if_tun.h
+++ b/include/uapi/linux/if_tun.h
@@ -56,6 +56,8 @@
#define TUNGETVNETHDRSZ _IOR('T', 215, int)
#define TUNSETVNETHDRSZ _IOW('T', 216, int)
#define TUNSETQUEUE _IOW('T', 217, int)
+#define TUNSETIFINDEX _IOW('T', 218, unsigned int)
+#define TUNGETFILTER _IOR('T', 219, struct sock_fprog)
/* TUNSETIFF ifr flags */
#define IFF_TUN 0x0001
@@ -70,6 +72,10 @@
#define IFF_DETACH_QUEUE 0x0400
/* read-only flag */
#define IFF_PERSIST 0x0800
+#define IFF_NOFILTER 0x1000
+
+/* Socket options */
+#define TUN_TX_TIMESTAMP 1
/* Features for GSO (TUNSETOFFLOAD). */
#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */
diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h
index 9edb441df827..f9e8e496ae5d 100644
--- a/include/uapi/linux/in.h
+++ b/include/uapi/linux/in.h
@@ -24,30 +24,53 @@
/* Standard well-defined IP protocols. */
enum {
IPPROTO_IP = 0, /* Dummy protocol for TCP */
+#define IPPROTO_IP IPPROTO_IP
IPPROTO_ICMP = 1, /* Internet Control Message Protocol */
+#define IPPROTO_ICMP IPPROTO_ICMP
IPPROTO_IGMP = 2, /* Internet Group Management Protocol */
+#define IPPROTO_IGMP IPPROTO_IGMP
IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */
+#define IPPROTO_IPIP IPPROTO_IPIP
IPPROTO_TCP = 6, /* Transmission Control Protocol */
+#define IPPROTO_TCP IPPROTO_TCP
IPPROTO_EGP = 8, /* Exterior Gateway Protocol */
+#define IPPROTO_EGP IPPROTO_EGP
IPPROTO_PUP = 12, /* PUP protocol */
+#define IPPROTO_PUP IPPROTO_PUP
IPPROTO_UDP = 17, /* User Datagram Protocol */
+#define IPPROTO_UDP IPPROTO_UDP
IPPROTO_IDP = 22, /* XNS IDP protocol */
+#define IPPROTO_IDP IPPROTO_IDP
+ IPPROTO_TP = 29, /* SO Transport Protocol Class 4 */
+#define IPPROTO_TP IPPROTO_TP
IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */
- IPPROTO_RSVP = 46, /* RSVP protocol */
+#define IPPROTO_DCCP IPPROTO_DCCP
+ IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */
+#define IPPROTO_IPV6 IPPROTO_IPV6
+ IPPROTO_RSVP = 46, /* RSVP Protocol */
+#define IPPROTO_RSVP IPPROTO_RSVP
IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */
-
- IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */
-
- IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */
- IPPROTO_AH = 51, /* Authentication Header protocol */
- IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */
- IPPROTO_PIM = 103, /* Protocol Independent Multicast */
-
- IPPROTO_COMP = 108, /* Compression Header protocol */
- IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */
+#define IPPROTO_GRE IPPROTO_GRE
+ IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */
+#define IPPROTO_ESP IPPROTO_ESP
+ IPPROTO_AH = 51, /* Authentication Header protocol */
+#define IPPROTO_AH IPPROTO_AH
+ IPPROTO_MTP = 92, /* Multicast Transport Protocol */
+#define IPPROTO_MTP IPPROTO_MTP
+ IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */
+#define IPPROTO_BEETPH IPPROTO_BEETPH
+ IPPROTO_ENCAP = 98, /* Encapsulation Header */
+#define IPPROTO_ENCAP IPPROTO_ENCAP
+ IPPROTO_PIM = 103, /* Protocol Independent Multicast */
+#define IPPROTO_PIM IPPROTO_PIM
+ IPPROTO_COMP = 108, /* Compression Header Protocol */
+#define IPPROTO_COMP IPPROTO_COMP
+ IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */
+#define IPPROTO_SCTP IPPROTO_SCTP
IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */
-
- IPPROTO_RAW = 255, /* Raw IP packets */
+#define IPPROTO_UDPLITE IPPROTO_UDPLITE
+ IPPROTO_RAW = 255, /* Raw IP packets */
+#define IPPROTO_RAW IPPROTO_RAW
IPPROTO_MAX
};
diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h
index 53b1d56a6e7f..440d5c479145 100644
--- a/include/uapi/linux/in6.h
+++ b/include/uapi/linux/in6.h
@@ -22,22 +22,30 @@
#define _UAPI_LINUX_IN6_H
#include <linux/types.h>
+#include <linux/libc-compat.h>
/*
* IPv6 address structure
*/
+#if __UAPI_DEF_IN6_ADDR
struct in6_addr {
union {
__u8 u6_addr8[16];
+#if __UAPI_DEF_IN6_ADDR_ALT
__be16 u6_addr16[8];
__be32 u6_addr32[4];
+#endif
} in6_u;
#define s6_addr in6_u.u6_addr8
+#if __UAPI_DEF_IN6_ADDR_ALT
#define s6_addr16 in6_u.u6_addr16
#define s6_addr32 in6_u.u6_addr32
+#endif
};
+#endif /* __UAPI_DEF_IN6_ADDR */
+#if __UAPI_DEF_SOCKADDR_IN6
struct sockaddr_in6 {
unsigned short int sin6_family; /* AF_INET6 */
__be16 sin6_port; /* Transport layer port # */
@@ -45,7 +53,9 @@ struct sockaddr_in6 {
struct in6_addr sin6_addr; /* IPv6 address */
__u32 sin6_scope_id; /* scope id (new in RFC2553) */
};
+#endif /* __UAPI_DEF_SOCKADDR_IN6 */
+#if __UAPI_DEF_IPV6_MREQ
struct ipv6_mreq {
/* IPv6 multicast address of group */
struct in6_addr ipv6mr_multiaddr;
@@ -53,6 +63,7 @@ struct ipv6_mreq {
/* local IPv6 address of interface */
int ipv6mr_ifindex;
};
+#endif /* __UAPI_DEF_IVP6_MREQ */
#define ipv6mr_acaddr ipv6mr_multiaddr
@@ -114,13 +125,24 @@ struct in6_flowlabel_req {
/*
* IPV6 extension headers
*/
-#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */
-#define IPPROTO_ROUTING 43 /* IPv6 routing header */
-#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */
-#define IPPROTO_ICMPV6 58 /* ICMPv6 */
-#define IPPROTO_NONE 59 /* IPv6 no next header */
-#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */
-#define IPPROTO_MH 135 /* IPv6 mobility header */
+#if __UAPI_DEF_IPPROTO_V6
+enum {
+ IPPROTO_HOPOPTS = 0, /* IPv6 hop-by-hop options */
+#define IPPROTO_HOPOPTS IPPROTO_HOPOPTS
+ IPPROTO_ROUTING = 43, /* IPv6 routing header */
+#define IPPROTO_ROUTING IPPROTO_ROUTING
+ IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header */
+#define IPPROTO_FRAGMENT IPPROTO_FRAGMENT
+ IPPROTO_ICMPV6 = 58, /* ICMPv6 */
+#define IPPROTO_ICMPV6 IPPROTO_ICMPV6
+ IPPROTO_NONE = 59, /* IPv6 no next header */
+#define IPPROTO_NONE IPPROTO_NONE
+ IPPROTO_DSTOPTS = 60, /* IPv6 destination options */
+#define IPPROTO_DSTOPTS IPPROTO_DSTOPTS
+ IPPROTO_MH = 135, /* IPv6 mobility header */
+#define IPPROTO_MH IPPROTO_MH
+};
+#endif /* __UAPI_DEF_IPPROTO_V6 */
/*
* IPv6 TLV options.
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index d584047b072b..d08abf9101d2 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -194,6 +194,8 @@ struct input_keymap_entry {
#define SYN_CONFIG 1
#define SYN_MT_REPORT 2
#define SYN_DROPPED 3
+#define SYN_MAX 0xf
+#define SYN_CNT (SYN_MAX+1)
/*
* Keys and buttons
diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h
index 2fee45bdec0a..411959405ab6 100644
--- a/include/uapi/linux/ip.h
+++ b/include/uapi/linux/ip.h
@@ -162,6 +162,8 @@ enum
IPV4_DEVCONF_SRC_VMARK,
IPV4_DEVCONF_PROXY_ARP_PVLAN,
IPV4_DEVCONF_ROUTE_LOCALNET,
+ IPV4_DEVCONF_IGMPV2_UNSOLICITED_REPORT_INTERVAL,
+ IPV4_DEVCONF_IGMPV3_UNSOLICITED_REPORT_INTERVAL,
__IPV4_DEVCONF_MAX
};
diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
index 4bda4cf5b0f5..593b0e32d956 100644
--- a/include/uapi/linux/ipv6.h
+++ b/include/uapi/linux/ipv6.h
@@ -160,6 +160,9 @@ enum {
DEVCONF_ACCEPT_DAD,
DEVCONF_FORCE_TLLAO,
DEVCONF_NDISC_NOTIFY,
+ DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL,
+ DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL,
+ DEVCONF_SUPPRESS_FRAG_NDISC,
DEVCONF_MAX
};
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index acccd08be6c7..99c25338ede8 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -667,6 +667,7 @@ struct kvm_ppc_smmu_info {
#define KVM_CAP_PPC_RTAS 91
#define KVM_CAP_IRQ_XICS 92
#define KVM_CAP_ARM_EL1_32BIT 93
+#define KVM_CAP_SPAPR_MULTITCE 94
#ifdef KVM_CAP_IRQ_ROUTING
diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h
index cea2c5c72d26..2841f86eae0b 100644
--- a/include/uapi/linux/kvm_para.h
+++ b/include/uapi/linux/kvm_para.h
@@ -19,6 +19,7 @@
#define KVM_HC_MMU_OP 2
#define KVM_HC_FEATURES 3
#define KVM_HC_PPC_MAP_MAGIC_PAGE 4
+#define KVM_HC_KICK_CPU 5
/*
* hypercalls use architecture specific
diff --git a/include/uapi/linux/libc-compat.h b/include/uapi/linux/libc-compat.h
new file mode 100644
index 000000000000..335e8a7cad39
--- /dev/null
+++ b/include/uapi/linux/libc-compat.h
@@ -0,0 +1,103 @@
+/*
+ * Compatibility interface for userspace libc header coordination:
+ *
+ * Define compatibility macros that are used to control the inclusion or
+ * exclusion of UAPI structures and definitions in coordination with another
+ * userspace C library.
+ *
+ * This header is intended to solve the problem of UAPI definitions that
+ * conflict with userspace definitions. If a UAPI header has such conflicting
+ * definitions then the solution is as follows:
+ *
+ * * Synchronize the UAPI header and the libc headers so either one can be
+ * used and such that the ABI is preserved. If this is not possible then
+ * no simple compatibility interface exists (you need to write translating
+ * wrappers and rename things) and you can't use this interface.
+ *
+ * Then follow this process:
+ *
+ * (a) Include libc-compat.h in the UAPI header.
+ * e.g. #include <linux/libc-compat.h>
+ * This include must be as early as possible.
+ *
+ * (b) In libc-compat.h add enough code to detect that the comflicting
+ * userspace libc header has been included first.
+ *
+ * (c) If the userspace libc header has been included first define a set of
+ * guard macros of the form __UAPI_DEF_FOO and set their values to 1, else
+ * set their values to 0.
+ *
+ * (d) Back in the UAPI header with the conflicting definitions, guard the
+ * definitions with:
+ * #if __UAPI_DEF_FOO
+ * ...
+ * #endif
+ *
+ * This fixes the situation where the linux headers are included *after* the
+ * libc headers. To fix the problem with the inclusion in the other order the
+ * userspace libc headers must be fixed like this:
+ *
+ * * For all definitions that conflict with kernel definitions wrap those
+ * defines in the following:
+ * #if !__UAPI_DEF_FOO
+ * ...
+ * #endif
+ *
+ * This prevents the redefinition of a construct already defined by the kernel.
+ */
+#ifndef _UAPI_LIBC_COMPAT_H
+#define _UAPI_LIBC_COMPAT_H
+
+/* We have included glibc headers... */
+#if defined(__GLIBC__)
+
+/* Coordinate with glibc netinet/in.h header. */
+#if defined(_NETINET_IN_H)
+
+/* GLIBC headers included first so don't define anything
+ * that would already be defined. */
+#define __UAPI_DEF_IN6_ADDR 0
+/* The exception is the in6_addr macros which must be defined
+ * if the glibc code didn't define them. This guard matches
+ * the guard in glibc/inet/netinet/in.h which defines the
+ * additional in6_addr macros e.g. s6_addr16, and s6_addr32. */
+#if defined(__USE_MISC) || defined (__USE_GNU)
+#define __UAPI_DEF_IN6_ADDR_ALT 0
+#else
+#define __UAPI_DEF_IN6_ADDR_ALT 1
+#endif
+#define __UAPI_DEF_SOCKADDR_IN6 0
+#define __UAPI_DEF_IPV6_MREQ 0
+#define __UAPI_DEF_IPPROTO_V6 0
+
+#else
+
+/* Linux headers included first, and we must define everything
+ * we need. The expectation is that glibc will check the
+ * __UAPI_DEF_* defines and adjust appropriately. */
+#define __UAPI_DEF_IN6_ADDR 1
+/* We unconditionally define the in6_addr macros and glibc must
+ * coordinate. */
+#define __UAPI_DEF_IN6_ADDR_ALT 1
+#define __UAPI_DEF_SOCKADDR_IN6 1
+#define __UAPI_DEF_IPV6_MREQ 1
+#define __UAPI_DEF_IPPROTO_V6 1
+
+#endif /* _NETINET_IN_H */
+
+
+/* If we did not see any headers from any supported C libraries,
+ * or we are being included in the kernel, then define everything
+ * that we need. */
+#else /* !defined(__GLIBC__) */
+
+/* Definitions for in6.h */
+#define __UAPI_DEF_IN6_ADDR 1
+#define __UAPI_DEF_IN6_ADDR_ALT 1
+#define __UAPI_DEF_SOCKADDR_IN6 1
+#define __UAPI_DEF_IPV6_MREQ 1
+#define __UAPI_DEF_IPPROTO_V6 1
+
+#endif /* __GLIBC__ */
+
+#endif /* _UAPI_LIBC_COMPAT_H */
diff --git a/include/uapi/linux/netfilter/Kbuild b/include/uapi/linux/netfilter/Kbuild
index 41115776d76f..174915420d3f 100644
--- a/include/uapi/linux/netfilter/Kbuild
+++ b/include/uapi/linux/netfilter/Kbuild
@@ -22,6 +22,7 @@ header-y += xt_CONNMARK.h
header-y += xt_CONNSECMARK.h
header-y += xt_CT.h
header-y += xt_DSCP.h
+header-y += xt_HMARK.h
header-y += xt_IDLETIMER.h
header-y += xt_LED.h
header-y += xt_LOG.h
@@ -68,6 +69,7 @@ header-y += xt_quota.h
header-y += xt_rateest.h
header-y += xt_realm.h
header-y += xt_recent.h
+header-y += xt_rpfilter.h
header-y += xt_sctp.h
header-y += xt_set.h
header-y += xt_socket.h
diff --git a/include/uapi/linux/netfilter/nf_conntrack_common.h b/include/uapi/linux/netfilter/nf_conntrack_common.h
index d69483fb3825..8dd803818ebe 100644
--- a/include/uapi/linux/netfilter/nf_conntrack_common.h
+++ b/include/uapi/linux/netfilter/nf_conntrack_common.h
@@ -99,7 +99,8 @@ enum ip_conntrack_events {
IPCT_PROTOINFO, /* protocol information has changed */
IPCT_HELPER, /* new helper has been set */
IPCT_MARK, /* new mark has been set */
- IPCT_NATSEQADJ, /* NAT is doing sequence adjustment */
+ IPCT_SEQADJ, /* sequence adjustment has changed */
+ IPCT_NATSEQADJ = IPCT_SEQADJ,
IPCT_SECMARK, /* new security mark has been set */
IPCT_LABEL, /* new connlabel has been set */
};
diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
index 08fabc6c93f3..acad6c52a652 100644
--- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
@@ -42,8 +42,10 @@ enum ctattr_type {
CTA_ID,
CTA_NAT_DST,
CTA_TUPLE_MASTER,
- CTA_NAT_SEQ_ADJ_ORIG,
- CTA_NAT_SEQ_ADJ_REPLY,
+ CTA_SEQ_ADJ_ORIG,
+ CTA_NAT_SEQ_ADJ_ORIG = CTA_SEQ_ADJ_ORIG,
+ CTA_SEQ_ADJ_REPLY,
+ CTA_NAT_SEQ_ADJ_REPLY = CTA_SEQ_ADJ_REPLY,
CTA_SECMARK, /* obsolete */
CTA_ZONE,
CTA_SECCTX,
@@ -165,6 +167,15 @@ enum ctattr_protonat {
};
#define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1)
+enum ctattr_seqadj {
+ CTA_SEQADJ_UNSPEC,
+ CTA_SEQADJ_CORRECTION_POS,
+ CTA_SEQADJ_OFFSET_BEFORE,
+ CTA_SEQADJ_OFFSET_AFTER,
+ __CTA_SEQADJ_MAX
+};
+#define CTA_SEQADJ_MAX (__CTA_SEQADJ_MAX - 1)
+
enum ctattr_natseq {
CTA_NAT_SEQ_UNSPEC,
CTA_NAT_SEQ_CORRECTION_POS,
diff --git a/include/uapi/linux/netfilter/nfnetlink_queue.h b/include/uapi/linux/netfilter/nfnetlink_queue.h
index 3a9b92147339..0132bad79de7 100644
--- a/include/uapi/linux/netfilter/nfnetlink_queue.h
+++ b/include/uapi/linux/netfilter/nfnetlink_queue.h
@@ -46,6 +46,7 @@ enum nfqnl_attr_type {
NFQA_CT_INFO, /* enum ip_conntrack_info */
NFQA_CAP_LEN, /* __u32 length of captured packet */
NFQA_SKB_INFO, /* __u32 skb meta information */
+ NFQA_EXP, /* nf_conntrack_netlink.h */
__NFQA_MAX
};
diff --git a/include/uapi/linux/netfilter/xt_HMARK.h b/include/uapi/linux/netfilter/xt_HMARK.h
new file mode 100644
index 000000000000..826fc5807577
--- /dev/null
+++ b/include/uapi/linux/netfilter/xt_HMARK.h
@@ -0,0 +1,50 @@
+#ifndef XT_HMARK_H_
+#define XT_HMARK_H_
+
+#include <linux/types.h>
+
+enum {
+ XT_HMARK_SADDR_MASK,
+ XT_HMARK_DADDR_MASK,
+ XT_HMARK_SPI,
+ XT_HMARK_SPI_MASK,
+ XT_HMARK_SPORT,
+ XT_HMARK_DPORT,
+ XT_HMARK_SPORT_MASK,
+ XT_HMARK_DPORT_MASK,
+ XT_HMARK_PROTO_MASK,
+ XT_HMARK_RND,
+ XT_HMARK_MODULUS,
+ XT_HMARK_OFFSET,
+ XT_HMARK_CT,
+ XT_HMARK_METHOD_L3,
+ XT_HMARK_METHOD_L3_4,
+};
+#define XT_HMARK_FLAG(flag) (1 << flag)
+
+union hmark_ports {
+ struct {
+ __u16 src;
+ __u16 dst;
+ } p16;
+ struct {
+ __be16 src;
+ __be16 dst;
+ } b16;
+ __u32 v32;
+ __be32 b32;
+};
+
+struct xt_hmark_info {
+ union nf_inet_addr src_mask;
+ union nf_inet_addr dst_mask;
+ union hmark_ports port_mask;
+ union hmark_ports port_set;
+ __u32 flags;
+ __u16 proto_mask;
+ __u32 hashrnd;
+ __u32 hmodulus;
+ __u32 hoffset; /* Mark offset to start from */
+};
+
+#endif /* XT_HMARK_H_ */
diff --git a/include/uapi/linux/netfilter/xt_SYNPROXY.h b/include/uapi/linux/netfilter/xt_SYNPROXY.h
new file mode 100644
index 000000000000..2d59fbaa93c6
--- /dev/null
+++ b/include/uapi/linux/netfilter/xt_SYNPROXY.h
@@ -0,0 +1,16 @@
+#ifndef _XT_SYNPROXY_H
+#define _XT_SYNPROXY_H
+
+#define XT_SYNPROXY_OPT_MSS 0x01
+#define XT_SYNPROXY_OPT_WSCALE 0x02
+#define XT_SYNPROXY_OPT_SACK_PERM 0x04
+#define XT_SYNPROXY_OPT_TIMESTAMP 0x08
+#define XT_SYNPROXY_OPT_ECN 0x10
+
+struct xt_synproxy_info {
+ __u8 options;
+ __u8 wscale;
+ __u16 mss;
+};
+
+#endif /* _XT_SYNPROXY_H */
diff --git a/include/uapi/linux/netfilter/xt_rpfilter.h b/include/uapi/linux/netfilter/xt_rpfilter.h
new file mode 100644
index 000000000000..8358d4f71952
--- /dev/null
+++ b/include/uapi/linux/netfilter/xt_rpfilter.h
@@ -0,0 +1,23 @@
+#ifndef _XT_RPATH_H
+#define _XT_RPATH_H
+
+#include <linux/types.h>
+
+enum {
+ XT_RPFILTER_LOOSE = 1 << 0,
+ XT_RPFILTER_VALID_MARK = 1 << 1,
+ XT_RPFILTER_ACCEPT_LOCAL = 1 << 2,
+ XT_RPFILTER_INVERT = 1 << 3,
+#ifdef __KERNEL__
+ XT_RPFILTER_OPTION_MASK = XT_RPFILTER_LOOSE |
+ XT_RPFILTER_VALID_MARK |
+ XT_RPFILTER_ACCEPT_LOCAL |
+ XT_RPFILTER_INVERT,
+#endif
+};
+
+struct xt_rpfilter_info {
+ __u8 flags;
+};
+
+#endif
diff --git a/include/uapi/linux/netfilter_bridge/ebt_802_3.h b/include/uapi/linux/netfilter_bridge/ebt_802_3.h
index 5bf84912a082..f37522aade24 100644
--- a/include/uapi/linux/netfilter_bridge/ebt_802_3.h
+++ b/include/uapi/linux/netfilter_bridge/ebt_802_3.h
@@ -2,6 +2,7 @@
#define _UAPI__LINUX_BRIDGE_EBT_802_3_H
#include <linux/types.h>
+#include <linux/if_ether.h>
#define EBT_802_3_SAP 0x01
#define EBT_802_3_TYPE 0x02
@@ -42,8 +43,8 @@ struct hdr_ni {
};
struct ebt_802_3_hdr {
- __u8 daddr[6];
- __u8 saddr[6];
+ __u8 daddr[ETH_ALEN];
+ __u8 saddr[ETH_ALEN];
__be16 len;
union {
struct hdr_ui ui;
diff --git a/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h b/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h
index c6a204c97047..eac0f6548f47 100644
--- a/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h
+++ b/include/uapi/linux/netfilter_ipv4/ipt_CLUSTERIP.h
@@ -2,6 +2,7 @@
#define _IPT_CLUSTERIP_H_target
#include <linux/types.h>
+#include <linux/if_ether.h>
enum clusterip_hashmode {
CLUSTERIP_HASHMODE_SIP = 0,
@@ -22,7 +23,7 @@ struct ipt_clusterip_tgt_info {
__u32 flags;
/* only relevant for new ones */
- __u8 clustermac[6];
+ __u8 clustermac[ETH_ALEN];
__u16 num_total_nodes;
__u16 num_local_nodes;
__u16 local_nodes[CLUSTERIP_MAX_NODES];
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index 8137dd8d2adf..29bed72a4ac4 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -71,6 +71,20 @@
* @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element.
* @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform
* that some firmware was loaded
+ * @NFC_EVENT_SE_ADDED: Event emitted when a new secure element is discovered.
+ * This typically will be sent whenever a new NFC controller with either
+ * an embedded SE or an UICC one connected to it through SWP.
+ * @NFC_EVENT_SE_REMOVED: Event emitted when a secure element is removed from
+ * the system, as a consequence of e.g. an NFC controller being unplugged.
+ * @NFC_EVENT_SE_CONNECTIVITY: This event is emitted whenever a secure element
+ * is requesting connectivity access. For example a UICC SE may need to
+ * talk with a sleeping modem and will notify this need by sending this
+ * event. It is then up to userspace to decide if it will wake the modem
+ * up or not.
+ * @NFC_EVENT_SE_TRANSACTION: This event is sent when an application running on
+ * a specific SE notifies us about the end of a transaction. The parameter
+ * for this event is the application ID (AID).
+ * @NFC_CMD_GET_SE: Dump all discovered secure elements from an NFC controller.
*/
enum nfc_commands {
NFC_CMD_UNSPEC,
@@ -97,6 +111,9 @@ enum nfc_commands {
NFC_CMD_FW_DOWNLOAD,
NFC_EVENT_SE_ADDED,
NFC_EVENT_SE_REMOVED,
+ NFC_EVENT_SE_CONNECTIVITY,
+ NFC_EVENT_SE_TRANSACTION,
+ NFC_CMD_GET_SE,
/* private: internal use only */
__NFC_CMD_AFTER_LAST
};
@@ -129,6 +146,7 @@ enum nfc_commands {
* @NFC_ATTR_FIRMWARE_NAME: Free format firmware version
* @NFC_ATTR_SE_INDEX: Secure element index
* @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED)
+ * @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status
*/
enum nfc_attrs {
NFC_ATTR_UNSPEC,
@@ -154,6 +172,8 @@ enum nfc_attrs {
NFC_ATTR_FIRMWARE_NAME,
NFC_ATTR_SE_INDEX,
NFC_ATTR_SE_TYPE,
+ NFC_ATTR_SE_AID,
+ NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS,
/* private: internal use only */
__NFC_ATTR_AFTER_LAST
};
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 861e5eba3953..fde2c021b26d 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -126,6 +126,31 @@
*/
/**
+ * DOC: packet coalesce support
+ *
+ * In most cases, host that receives IPv4 and IPv6 multicast/broadcast
+ * packets does not do anything with these packets. Therefore the
+ * reception of these unwanted packets causes unnecessary processing
+ * and power consumption.
+ *
+ * Packet coalesce feature helps to reduce number of received interrupts
+ * to host by buffering these packets in firmware/hardware for some
+ * predefined time. Received interrupt will be generated when one of the
+ * following events occur.
+ * a) Expiration of hardware timer whose expiration time is set to maximum
+ * coalescing delay of matching coalesce rule.
+ * b) Coalescing buffer in hardware reaches it's limit.
+ * c) Packet doesn't match any of the configured coalesce rules.
+ *
+ * User needs to configure following parameters for creating a coalesce
+ * rule.
+ * a) Maximum coalescing delay
+ * b) List of packet patterns which needs to be matched
+ * c) Condition for coalescence. pattern 'match' or 'no match'
+ * Multiple such rules can be created.
+ */
+
+/**
* enum nl80211_commands - supported nl80211 commands
*
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -648,6 +673,19 @@
* @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can
* return back to normal.
*
+ * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules.
+ * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules.
+ *
+ * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the
+ * the new channel information (Channel Switch Announcement - CSA)
+ * in the beacon for some time (as defined in the
+ * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the
+ * new channel. Userspace provides the new channel information (using
+ * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel
+ * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform
+ * other station that transmission must be blocked until the channel
+ * switch is complete.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -810,6 +848,11 @@ enum nl80211_commands {
NL80211_CMD_CRIT_PROTOCOL_START,
NL80211_CMD_CRIT_PROTOCOL_STOP,
+ NL80211_CMD_GET_COALESCE,
+ NL80211_CMD_SET_COALESCE,
+
+ NL80211_CMD_CHANNEL_SWITCH,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1436,6 +1479,23 @@ enum nl80211_commands {
* allowed to be used with the first @NL80211_CMD_SET_STATION command to
* update a TDLS peer STA entry.
*
+ * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information.
+ *
+ * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's
+ * until the channel switch event.
+ * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission
+ * must be blocked on the current channel (before the channel switch
+ * operation).
+ * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
+ * for the time while performing a channel switch.
+ * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter
+ * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+ * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter
+ * field in the probe response (%NL80211_ATTR_PROBE_RESP).
+ *
+ * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
+ * As specified in the &enum nl80211_rxmgmt_flags.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1736,6 +1796,16 @@ enum nl80211_attrs {
NL80211_ATTR_PEER_AID,
+ NL80211_ATTR_COALESCE_RULE,
+
+ NL80211_ATTR_CH_SWITCH_COUNT,
+ NL80211_ATTR_CH_SWITCH_BLOCK_TX,
+ NL80211_ATTR_CSA_IES,
+ NL80211_ATTR_CSA_C_OFF_BEACON,
+ NL80211_ATTR_CSA_C_OFF_PRESP,
+
+ NL80211_ATTR_RXMGMT_FLAGS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2773,6 +2843,21 @@ enum nl80211_chan_width {
};
/**
+ * enum nl80211_bss_scan_width - control channel width for a BSS
+ *
+ * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute.
+ *
+ * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible
+ * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide
+ * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide
+ */
+enum nl80211_bss_scan_width {
+ NL80211_BSS_CHAN_WIDTH_20,
+ NL80211_BSS_CHAN_WIDTH_10,
+ NL80211_BSS_CHAN_WIDTH_5,
+};
+
+/**
* enum nl80211_bss - netlink attributes for a BSS
*
* @__NL80211_BSS_INVALID: invalid
@@ -2796,6 +2881,8 @@ enum nl80211_chan_width {
* @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
* elements from a Beacon frame (bin); not present if no Beacon frame has
* yet been received
+ * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel
+ * (u32, enum nl80211_bss_scan_width)
* @__NL80211_BSS_AFTER_LAST: internal
* @NL80211_BSS_MAX: highest BSS attribute
*/
@@ -2812,6 +2899,7 @@ enum nl80211_bss {
NL80211_BSS_STATUS,
NL80211_BSS_SEEN_MS_AGO,
NL80211_BSS_BEACON_IES,
+ NL80211_BSS_CHAN_WIDTH,
/* keep last */
__NL80211_BSS_AFTER_LAST,
@@ -3060,11 +3148,11 @@ enum nl80211_tx_power_setting {
};
/**
- * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
- * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
- * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ * enum nl80211_packet_pattern_attr - packet pattern attribute
+ * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
* a zero bit are ignored
- * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
* a bit for each byte in the pattern. The lowest-order bit corresponds
* to the first byte of the pattern, but the bytes of the pattern are
* in a little-endian-like format, i.e. the 9th byte of the pattern
@@ -3075,39 +3163,50 @@ enum nl80211_tx_power_setting {
* Note that the pattern matching is done as though frames were not
* 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
* first (including SNAP header unpacking) and then matched.
- * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after
+ * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
* these fixed number of bytes of received packet
- * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
- * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ * @NUM_NL80211_PKTPAT: number of attributes
+ * @MAX_NL80211_PKTPAT: max attribute number
*/
-enum nl80211_wowlan_packet_pattern_attr {
- __NL80211_WOWLAN_PKTPAT_INVALID,
- NL80211_WOWLAN_PKTPAT_MASK,
- NL80211_WOWLAN_PKTPAT_PATTERN,
- NL80211_WOWLAN_PKTPAT_OFFSET,
+enum nl80211_packet_pattern_attr {
+ __NL80211_PKTPAT_INVALID,
+ NL80211_PKTPAT_MASK,
+ NL80211_PKTPAT_PATTERN,
+ NL80211_PKTPAT_OFFSET,
- NUM_NL80211_WOWLAN_PKTPAT,
- MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+ NUM_NL80211_PKTPAT,
+ MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
};
/**
- * struct nl80211_wowlan_pattern_support - pattern support information
+ * struct nl80211_pattern_support - packet pattern support information
* @max_patterns: maximum number of patterns supported
* @min_pattern_len: minimum length of each pattern
* @max_pattern_len: maximum length of each pattern
* @max_pkt_offset: maximum Rx packet offset
*
* This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
- * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
- * capability information given by the kernel to userspace.
+ * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in
+ * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of
+ * %NL80211_ATTR_COALESCE_RULE in the capability information given
+ * by the kernel to userspace.
*/
-struct nl80211_wowlan_pattern_support {
+struct nl80211_pattern_support {
__u32 max_patterns;
__u32 min_pattern_len;
__u32 max_pattern_len;
__u32 max_pkt_offset;
} __attribute__((packed));
+/* only for backward compatibility */
+#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
+#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
+#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
+#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
+#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
+#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
+#define nl80211_wowlan_pattern_support nl80211_pattern_support
+
/**
* enum nl80211_wowlan_triggers - WoWLAN trigger definitions
* @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
@@ -3127,7 +3226,7 @@ struct nl80211_wowlan_pattern_support {
* pattern matching is done after the packet is converted to the MSDU.
*
* In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
- * carrying a &struct nl80211_wowlan_pattern_support.
+ * carrying a &struct nl80211_pattern_support.
*
* When reporting wakeup. it is a u32 attribute containing the 0-based
* index of the pattern that caused the wakeup, in the patterns passed
@@ -3284,7 +3383,7 @@ struct nl80211_wowlan_tcp_data_token_feature {
* @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
* u32 attribute holding the maximum length
* @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
- * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK
+ * feature advertising. The mask works like @NL80211_PKTPAT_MASK
* but on the TCP payload only.
* @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
* @MAX_NL80211_WOWLAN_TCP: highest attribute number
@@ -3309,6 +3408,55 @@ enum nl80211_wowlan_tcp_attrs {
};
/**
+ * struct nl80211_coalesce_rule_support - coalesce rule support information
+ * @max_rules: maximum number of rules supported
+ * @pat: packet pattern support information
+ * @max_delay: maximum supported coalescing delay in msecs
+ *
+ * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the
+ * capability information given by the kernel to userspace.
+ */
+struct nl80211_coalesce_rule_support {
+ __u32 max_rules;
+ struct nl80211_pattern_support pat;
+ __u32 max_delay;
+} __attribute__((packed));
+
+/**
+ * enum nl80211_attr_coalesce_rule - coalesce rule attribute
+ * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute
+ * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing
+ * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence,
+ * see &enum nl80211_coalesce_condition.
+ * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched
+ * after these fixed number of bytes of received packet
+ * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes
+ * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number
+ */
+enum nl80211_attr_coalesce_rule {
+ __NL80211_COALESCE_RULE_INVALID,
+ NL80211_ATTR_COALESCE_RULE_DELAY,
+ NL80211_ATTR_COALESCE_RULE_CONDITION,
+ NL80211_ATTR_COALESCE_RULE_PKT_PATTERN,
+
+ /* keep last */
+ NUM_NL80211_ATTR_COALESCE_RULE,
+ NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1
+};
+
+/**
+ * enum nl80211_coalesce_condition - coalesce rule conditions
+ * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
+ * in a rule are matched.
+ * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
+ * in a rule are not matched.
+ */
+enum nl80211_coalesce_condition {
+ NL80211_COALESCE_CONDITION_MATCH,
+ NL80211_COALESCE_CONDITION_NO_MATCH
+};
+
+/**
* enum nl80211_iface_limit_attrs - limit attributes
* @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
* @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
@@ -3758,4 +3906,15 @@ enum nl80211_crit_proto_id {
/* maximum duration for critical protocol measures */
#define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */
+/**
+ * enum nl80211_rxmgmt_flags - flags for received management frame.
+ *
+ * Used by cfg80211_rx_mgmt()
+ *
+ * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
+ */
+enum nl80211_rxmgmt_flags {
+ NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/uapi/linux/nvme.h b/include/uapi/linux/nvme.h
new file mode 100644
index 000000000000..989c04e0c563
--- /dev/null
+++ b/include/uapi/linux/nvme.h
@@ -0,0 +1,477 @@
+/*
+ * Definitions for the NVM Express interface
+ * Copyright (c) 2011-2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _UAPI_LINUX_NVME_H
+#define _UAPI_LINUX_NVME_H
+
+#include <linux/types.h>
+
+struct nvme_id_power_state {
+ __le16 max_power; /* centiwatts */
+ __u8 rsvd2;
+ __u8 flags;
+ __le32 entry_lat; /* microseconds */
+ __le32 exit_lat; /* microseconds */
+ __u8 read_tput;
+ __u8 read_lat;
+ __u8 write_tput;
+ __u8 write_lat;
+ __u8 rsvd16[16];
+};
+
+enum {
+ NVME_PS_FLAGS_MAX_POWER_SCALE = 1 << 0,
+ NVME_PS_FLAGS_NON_OP_STATE = 1 << 1,
+};
+
+struct nvme_id_ctrl {
+ __le16 vid;
+ __le16 ssvid;
+ char sn[20];
+ char mn[40];
+ char fr[8];
+ __u8 rab;
+ __u8 ieee[3];
+ __u8 mic;
+ __u8 mdts;
+ __u8 rsvd78[178];
+ __le16 oacs;
+ __u8 acl;
+ __u8 aerl;
+ __u8 frmw;
+ __u8 lpa;
+ __u8 elpe;
+ __u8 npss;
+ __u8 rsvd264[248];
+ __u8 sqes;
+ __u8 cqes;
+ __u8 rsvd514[2];
+ __le32 nn;
+ __le16 oncs;
+ __le16 fuses;
+ __u8 fna;
+ __u8 vwc;
+ __le16 awun;
+ __le16 awupf;
+ __u8 rsvd530[1518];
+ struct nvme_id_power_state psd[32];
+ __u8 vs[1024];
+};
+
+enum {
+ NVME_CTRL_ONCS_COMPARE = 1 << 0,
+ NVME_CTRL_ONCS_WRITE_UNCORRECTABLE = 1 << 1,
+ NVME_CTRL_ONCS_DSM = 1 << 2,
+};
+
+struct nvme_lbaf {
+ __le16 ms;
+ __u8 ds;
+ __u8 rp;
+};
+
+struct nvme_id_ns {
+ __le64 nsze;
+ __le64 ncap;
+ __le64 nuse;
+ __u8 nsfeat;
+ __u8 nlbaf;
+ __u8 flbas;
+ __u8 mc;
+ __u8 dpc;
+ __u8 dps;
+ __u8 rsvd30[98];
+ struct nvme_lbaf lbaf[16];
+ __u8 rsvd192[192];
+ __u8 vs[3712];
+};
+
+enum {
+ NVME_NS_FEAT_THIN = 1 << 0,
+ NVME_LBAF_RP_BEST = 0,
+ NVME_LBAF_RP_BETTER = 1,
+ NVME_LBAF_RP_GOOD = 2,
+ NVME_LBAF_RP_DEGRADED = 3,
+};
+
+struct nvme_smart_log {
+ __u8 critical_warning;
+ __u8 temperature[2];
+ __u8 avail_spare;
+ __u8 spare_thresh;
+ __u8 percent_used;
+ __u8 rsvd6[26];
+ __u8 data_units_read[16];
+ __u8 data_units_written[16];
+ __u8 host_reads[16];
+ __u8 host_writes[16];
+ __u8 ctrl_busy_time[16];
+ __u8 power_cycles[16];
+ __u8 power_on_hours[16];
+ __u8 unsafe_shutdowns[16];
+ __u8 media_errors[16];
+ __u8 num_err_log_entries[16];
+ __u8 rsvd192[320];
+};
+
+enum {
+ NVME_SMART_CRIT_SPARE = 1 << 0,
+ NVME_SMART_CRIT_TEMPERATURE = 1 << 1,
+ NVME_SMART_CRIT_RELIABILITY = 1 << 2,
+ NVME_SMART_CRIT_MEDIA = 1 << 3,
+ NVME_SMART_CRIT_VOLATILE_MEMORY = 1 << 4,
+};
+
+struct nvme_lba_range_type {
+ __u8 type;
+ __u8 attributes;
+ __u8 rsvd2[14];
+ __u64 slba;
+ __u64 nlb;
+ __u8 guid[16];
+ __u8 rsvd48[16];
+};
+
+enum {
+ NVME_LBART_TYPE_FS = 0x01,
+ NVME_LBART_TYPE_RAID = 0x02,
+ NVME_LBART_TYPE_CACHE = 0x03,
+ NVME_LBART_TYPE_SWAP = 0x04,
+
+ NVME_LBART_ATTRIB_TEMP = 1 << 0,
+ NVME_LBART_ATTRIB_HIDE = 1 << 1,
+};
+
+/* I/O commands */
+
+enum nvme_opcode {
+ nvme_cmd_flush = 0x00,
+ nvme_cmd_write = 0x01,
+ nvme_cmd_read = 0x02,
+ nvme_cmd_write_uncor = 0x04,
+ nvme_cmd_compare = 0x05,
+ nvme_cmd_dsm = 0x09,
+};
+
+struct nvme_common_command {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __le32 cdw2[2];
+ __le64 metadata;
+ __le64 prp1;
+ __le64 prp2;
+ __le32 cdw10[6];
+};
+
+struct nvme_rw_command {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2;
+ __le64 metadata;
+ __le64 prp1;
+ __le64 prp2;
+ __le64 slba;
+ __le16 length;
+ __le16 control;
+ __le32 dsmgmt;
+ __le32 reftag;
+ __le16 apptag;
+ __le16 appmask;
+};
+
+enum {
+ NVME_RW_LR = 1 << 15,
+ NVME_RW_FUA = 1 << 14,
+ NVME_RW_DSM_FREQ_UNSPEC = 0,
+ NVME_RW_DSM_FREQ_TYPICAL = 1,
+ NVME_RW_DSM_FREQ_RARE = 2,
+ NVME_RW_DSM_FREQ_READS = 3,
+ NVME_RW_DSM_FREQ_WRITES = 4,
+ NVME_RW_DSM_FREQ_RW = 5,
+ NVME_RW_DSM_FREQ_ONCE = 6,
+ NVME_RW_DSM_FREQ_PREFETCH = 7,
+ NVME_RW_DSM_FREQ_TEMP = 8,
+ NVME_RW_DSM_LATENCY_NONE = 0 << 4,
+ NVME_RW_DSM_LATENCY_IDLE = 1 << 4,
+ NVME_RW_DSM_LATENCY_NORM = 2 << 4,
+ NVME_RW_DSM_LATENCY_LOW = 3 << 4,
+ NVME_RW_DSM_SEQ_REQ = 1 << 6,
+ NVME_RW_DSM_COMPRESSED = 1 << 7,
+};
+
+struct nvme_dsm_cmd {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2[2];
+ __le64 prp1;
+ __le64 prp2;
+ __le32 nr;
+ __le32 attributes;
+ __u32 rsvd12[4];
+};
+
+enum {
+ NVME_DSMGMT_IDR = 1 << 0,
+ NVME_DSMGMT_IDW = 1 << 1,
+ NVME_DSMGMT_AD = 1 << 2,
+};
+
+struct nvme_dsm_range {
+ __le32 cattr;
+ __le32 nlb;
+ __le64 slba;
+};
+
+/* Admin commands */
+
+enum nvme_admin_opcode {
+ nvme_admin_delete_sq = 0x00,
+ nvme_admin_create_sq = 0x01,
+ nvme_admin_get_log_page = 0x02,
+ nvme_admin_delete_cq = 0x04,
+ nvme_admin_create_cq = 0x05,
+ nvme_admin_identify = 0x06,
+ nvme_admin_abort_cmd = 0x08,
+ nvme_admin_set_features = 0x09,
+ nvme_admin_get_features = 0x0a,
+ nvme_admin_async_event = 0x0c,
+ nvme_admin_activate_fw = 0x10,
+ nvme_admin_download_fw = 0x11,
+ nvme_admin_format_nvm = 0x80,
+ nvme_admin_security_send = 0x81,
+ nvme_admin_security_recv = 0x82,
+};
+
+enum {
+ NVME_QUEUE_PHYS_CONTIG = (1 << 0),
+ NVME_CQ_IRQ_ENABLED = (1 << 1),
+ NVME_SQ_PRIO_URGENT = (0 << 1),
+ NVME_SQ_PRIO_HIGH = (1 << 1),
+ NVME_SQ_PRIO_MEDIUM = (2 << 1),
+ NVME_SQ_PRIO_LOW = (3 << 1),
+ NVME_FEAT_ARBITRATION = 0x01,
+ NVME_FEAT_POWER_MGMT = 0x02,
+ NVME_FEAT_LBA_RANGE = 0x03,
+ NVME_FEAT_TEMP_THRESH = 0x04,
+ NVME_FEAT_ERR_RECOVERY = 0x05,
+ NVME_FEAT_VOLATILE_WC = 0x06,
+ NVME_FEAT_NUM_QUEUES = 0x07,
+ NVME_FEAT_IRQ_COALESCE = 0x08,
+ NVME_FEAT_IRQ_CONFIG = 0x09,
+ NVME_FEAT_WRITE_ATOMIC = 0x0a,
+ NVME_FEAT_ASYNC_EVENT = 0x0b,
+ NVME_FEAT_SW_PROGRESS = 0x0c,
+ NVME_FWACT_REPL = (0 << 3),
+ NVME_FWACT_REPL_ACTV = (1 << 3),
+ NVME_FWACT_ACTV = (2 << 3),
+};
+
+struct nvme_identify {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2[2];
+ __le64 prp1;
+ __le64 prp2;
+ __le32 cns;
+ __u32 rsvd11[5];
+};
+
+struct nvme_features {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2[2];
+ __le64 prp1;
+ __le64 prp2;
+ __le32 fid;
+ __le32 dword11;
+ __u32 rsvd12[4];
+};
+
+struct nvme_create_cq {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[5];
+ __le64 prp1;
+ __u64 rsvd8;
+ __le16 cqid;
+ __le16 qsize;
+ __le16 cq_flags;
+ __le16 irq_vector;
+ __u32 rsvd12[4];
+};
+
+struct nvme_create_sq {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[5];
+ __le64 prp1;
+ __u64 rsvd8;
+ __le16 sqid;
+ __le16 qsize;
+ __le16 sq_flags;
+ __le16 cqid;
+ __u32 rsvd12[4];
+};
+
+struct nvme_delete_queue {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[9];
+ __le16 qid;
+ __u16 rsvd10;
+ __u32 rsvd11[5];
+};
+
+struct nvme_download_firmware {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[5];
+ __le64 prp1;
+ __le64 prp2;
+ __le32 numd;
+ __le32 offset;
+ __u32 rsvd12[4];
+};
+
+struct nvme_format_cmd {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2[4];
+ __le32 cdw10;
+ __u32 rsvd11[5];
+};
+
+struct nvme_command {
+ union {
+ struct nvme_common_command common;
+ struct nvme_rw_command rw;
+ struct nvme_identify identify;
+ struct nvme_features features;
+ struct nvme_create_cq create_cq;
+ struct nvme_create_sq create_sq;
+ struct nvme_delete_queue delete_queue;
+ struct nvme_download_firmware dlfw;
+ struct nvme_format_cmd format;
+ struct nvme_dsm_cmd dsm;
+ };
+};
+
+enum {
+ NVME_SC_SUCCESS = 0x0,
+ NVME_SC_INVALID_OPCODE = 0x1,
+ NVME_SC_INVALID_FIELD = 0x2,
+ NVME_SC_CMDID_CONFLICT = 0x3,
+ NVME_SC_DATA_XFER_ERROR = 0x4,
+ NVME_SC_POWER_LOSS = 0x5,
+ NVME_SC_INTERNAL = 0x6,
+ NVME_SC_ABORT_REQ = 0x7,
+ NVME_SC_ABORT_QUEUE = 0x8,
+ NVME_SC_FUSED_FAIL = 0x9,
+ NVME_SC_FUSED_MISSING = 0xa,
+ NVME_SC_INVALID_NS = 0xb,
+ NVME_SC_CMD_SEQ_ERROR = 0xc,
+ NVME_SC_LBA_RANGE = 0x80,
+ NVME_SC_CAP_EXCEEDED = 0x81,
+ NVME_SC_NS_NOT_READY = 0x82,
+ NVME_SC_CQ_INVALID = 0x100,
+ NVME_SC_QID_INVALID = 0x101,
+ NVME_SC_QUEUE_SIZE = 0x102,
+ NVME_SC_ABORT_LIMIT = 0x103,
+ NVME_SC_ABORT_MISSING = 0x104,
+ NVME_SC_ASYNC_LIMIT = 0x105,
+ NVME_SC_FIRMWARE_SLOT = 0x106,
+ NVME_SC_FIRMWARE_IMAGE = 0x107,
+ NVME_SC_INVALID_VECTOR = 0x108,
+ NVME_SC_INVALID_LOG_PAGE = 0x109,
+ NVME_SC_INVALID_FORMAT = 0x10a,
+ NVME_SC_BAD_ATTRIBUTES = 0x180,
+ NVME_SC_WRITE_FAULT = 0x280,
+ NVME_SC_READ_ERROR = 0x281,
+ NVME_SC_GUARD_CHECK = 0x282,
+ NVME_SC_APPTAG_CHECK = 0x283,
+ NVME_SC_REFTAG_CHECK = 0x284,
+ NVME_SC_COMPARE_FAILED = 0x285,
+ NVME_SC_ACCESS_DENIED = 0x286,
+};
+
+struct nvme_completion {
+ __le32 result; /* Used by admin commands to return data */
+ __u32 rsvd;
+ __le16 sq_head; /* how much of this queue may be reclaimed */
+ __le16 sq_id; /* submission queue that generated this entry */
+ __u16 command_id; /* of the command which completed */
+ __le16 status; /* did the command fail, and if so, why? */
+};
+
+struct nvme_user_io {
+ __u8 opcode;
+ __u8 flags;
+ __u16 control;
+ __u16 nblocks;
+ __u16 rsvd;
+ __u64 metadata;
+ __u64 addr;
+ __u64 slba;
+ __u32 dsmgmt;
+ __u32 reftag;
+ __u16 apptag;
+ __u16 appmask;
+};
+
+struct nvme_admin_cmd {
+ __u8 opcode;
+ __u8 flags;
+ __u16 rsvd1;
+ __u32 nsid;
+ __u32 cdw2;
+ __u32 cdw3;
+ __u64 metadata;
+ __u64 addr;
+ __u32 metadata_len;
+ __u32 data_len;
+ __u32 cdw10;
+ __u32 cdw11;
+ __u32 cdw12;
+ __u32 cdw13;
+ __u32 cdw14;
+ __u32 cdw15;
+ __u32 timeout_ms;
+ __u32 result;
+};
+
+#define NVME_IOCTL_ID _IO('N', 0x40)
+#define NVME_IOCTL_ADMIN_CMD _IOWR('N', 0x41, struct nvme_admin_cmd)
+#define NVME_IOCTL_SUBMIT_IO _IOW('N', 0x42, struct nvme_user_io)
+
+#endif /* _UAPI_LINUX_NVME_H */
diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h
index c55efaaa9bb4..a74d375b439b 100644
--- a/include/uapi/linux/openvswitch.h
+++ b/include/uapi/linux/openvswitch.h
@@ -1,6 +1,6 @@
/*
- * Copyright (c) 2007-2011 Nicira Networks.
+ * Copyright (c) 2007-2013 Nicira, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
@@ -165,6 +165,7 @@ enum ovs_vport_type {
OVS_VPORT_TYPE_NETDEV, /* network device */
OVS_VPORT_TYPE_INTERNAL, /* network device implemented by datapath */
OVS_VPORT_TYPE_GRE, /* GRE tunnel. */
+ OVS_VPORT_TYPE_VXLAN, /* VXLAN tunnel. */
__OVS_VPORT_TYPE_MAX
};
@@ -211,6 +212,16 @@ enum ovs_vport_attr {
#define OVS_VPORT_ATTR_MAX (__OVS_VPORT_ATTR_MAX - 1)
+/* OVS_VPORT_ATTR_OPTIONS attributes for tunnels.
+ */
+enum {
+ OVS_TUNNEL_ATTR_UNSPEC,
+ OVS_TUNNEL_ATTR_DST_PORT, /* 16-bit UDP port, used by L4 tunnels. */
+ __OVS_TUNNEL_ATTR_MAX
+};
+
+#define OVS_TUNNEL_ATTR_MAX (__OVS_TUNNEL_ATTR_MAX - 1)
+
/* Flows. */
#define OVS_FLOW_FAMILY "ovs_flow"
@@ -248,6 +259,7 @@ enum ovs_key_attr {
OVS_KEY_ATTR_ND, /* struct ovs_key_nd */
OVS_KEY_ATTR_SKB_MARK, /* u32 skb mark */
OVS_KEY_ATTR_TUNNEL, /* Nested set of ovs_tunnel attributes */
+ OVS_KEY_ATTR_SCTP, /* struct ovs_key_sctp */
#ifdef __KERNEL__
OVS_KEY_ATTR_IPV4_TUNNEL, /* struct ovs_key_ipv4_tunnel */
@@ -322,6 +334,11 @@ struct ovs_key_udp {
__be16 udp_dst;
};
+struct ovs_key_sctp {
+ __be16 sctp_src;
+ __be16 sctp_dst;
+};
+
struct ovs_key_icmp {
__u8 icmp_type;
__u8 icmp_code;
@@ -368,6 +385,12 @@ struct ovs_key_nd {
* @OVS_FLOW_ATTR_CLEAR: If present in a %OVS_FLOW_CMD_SET request, clears the
* last-used time, accumulated TCP flags, and statistics for this flow.
* Otherwise ignored in requests. Never present in notifications.
+ * @OVS_FLOW_ATTR_MASK: Nested %OVS_KEY_ATTR_* attributes specifying the
+ * mask bits for wildcarded flow match. Mask bit value '1' specifies exact
+ * match with corresponding flow key bit, while mask bit value '0' specifies
+ * a wildcarded match. Omitting attribute is treated as wildcarding all
+ * corresponding fields. Optional for all requests. If not present,
+ * all flow key bits are exact match bits.
*
* These attributes follow the &struct ovs_header within the Generic Netlink
* payload for %OVS_FLOW_* commands.
@@ -380,6 +403,7 @@ enum ovs_flow_attr {
OVS_FLOW_ATTR_TCP_FLAGS, /* 8-bit OR'd TCP flags. */
OVS_FLOW_ATTR_USED, /* u64 msecs last used in monotonic time. */
OVS_FLOW_ATTR_CLEAR, /* Flag to clear stats, tcp_flags, used. */
+ OVS_FLOW_ATTR_MASK, /* Sequence of OVS_KEY_ATTR_* attributes. */
__OVS_FLOW_ATTR_MAX
};
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index c3cc01d474b0..baa7852468ef 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -421,24 +421,24 @@
#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */
#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */
#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
-#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
-#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */
+#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */
+#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */
#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
#define PCI_EXP_DEVCAP 4 /* Device capabilities */
-#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */
-#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */
-#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */
-#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */
-#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */
-#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */
-#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */
-#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */
-#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */
-#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */
-#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */
+#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */
+#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */
+#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */
+#define PCI_EXP_DEVCAP_L0S 0x000001c0 /* L0s Acceptable Latency */
+#define PCI_EXP_DEVCAP_L1 0x00000e00 /* L1 Acceptable Latency */
+#define PCI_EXP_DEVCAP_ATN_BUT 0x00001000 /* Attention Button Present */
+#define PCI_EXP_DEVCAP_ATN_IND 0x00002000 /* Attention Indicator Present */
+#define PCI_EXP_DEVCAP_PWR_IND 0x00004000 /* Power Indicator Present */
+#define PCI_EXP_DEVCAP_RBER 0x00008000 /* Role-Based Error Reporting */
+#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */
+#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */
#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
#define PCI_EXP_DEVCTL 8 /* Device Control */
#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */
@@ -454,16 +454,16 @@
#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */
#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
#define PCI_EXP_DEVSTA 10 /* Device Status */
-#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */
-#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */
-#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */
-#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */
-#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */
-#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */
+#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */
+#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */
+#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */
+#define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported Request Detected */
+#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */
+#define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */
#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */
-#define PCI_EXP_LNKCAP_SLS_2_5GB 0x1 /* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */
-#define PCI_EXP_LNKCAP_SLS_5_0GB 0x2 /* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */
+#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */
+#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */
#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
@@ -475,21 +475,21 @@
#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
#define PCI_EXP_LNKCTL 16 /* Link Control */
#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */
-#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */
-#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */
+#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */
+#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */
#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */
#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */
#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */
#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */
#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */
-#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */
+#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */
#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */
#define PCI_EXP_LNKSTA 18 /* Link Status */
#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
-#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */
-#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */
+#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */
+#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */
#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
@@ -534,44 +534,49 @@
#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */
#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */
#define PCI_EXP_RTCTL 28 /* Root Control */
-#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */
-#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */
-#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */
-#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */
-#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */
+#define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */
+#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */
+#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */
+#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */
+#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */
#define PCI_EXP_RTCAP 30 /* Root Capabilities */
#define PCI_EXP_RTSTA 32 /* Root Status */
-#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
-#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */
/*
- * Note that the following PCI Express 'Capability Structure' registers
- * were introduced with 'Capability Version' 0x2 (v2). These registers
- * do not exist on devices with Capability Version 1. Use pci_pcie_cap2()
- * to use these fields safely.
+ * The Device Capabilities 2, Device Status 2, Device Control 2,
+ * Link Capabilities 2, Link Status 2, Link Control 2,
+ * Slot Capabilities 2, Slot Status 2, and Slot Control 2 registers
+ * are only present on devices with PCIe Capability version 2.
+ * Use pcie_capability_read_word() and similar interfaces to use them
+ * safely.
*/
#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
-#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */
-#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */
-#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */
-#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */
-#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */
+#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */
+#define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */
+#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */
+#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */
+#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */
#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
-#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
-#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */
-#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */
-#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */
-#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */
-#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */
-#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
+#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
+#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */
+#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */
+#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */
+#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */
+#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */
+#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */
+#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */
#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */
-#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */
-#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x02 /* Supported Link Speed 2.5GT/s */
-#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x04 /* Supported Link Speed 5.0GT/s */
-#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x08 /* Supported Link Speed 8.0GT/s */
-#define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */
+#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */
+#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */
+#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5.0GT/s */
+#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8.0GT/s */
+#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */
#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
+#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
+#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */
/* Extended Capabilities (PCI-X 2.0 and Express) */
#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index 0b1df41691e8..ca1d90bcb74d 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -109,6 +109,7 @@ enum perf_sw_ids {
PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6,
PERF_COUNT_SW_ALIGNMENT_FAULTS = 7,
PERF_COUNT_SW_EMULATION_FAULTS = 8,
+ PERF_COUNT_SW_DUMMY = 9,
PERF_COUNT_SW_MAX, /* non-ABI */
};
@@ -134,8 +135,9 @@ enum perf_event_sample_format {
PERF_SAMPLE_STACK_USER = 1U << 13,
PERF_SAMPLE_WEIGHT = 1U << 14,
PERF_SAMPLE_DATA_SRC = 1U << 15,
+ PERF_SAMPLE_IDENTIFIER = 1U << 16,
- PERF_SAMPLE_MAX = 1U << 16, /* non-ABI */
+ PERF_SAMPLE_MAX = 1U << 17, /* non-ABI */
};
/*
@@ -275,8 +277,9 @@ struct perf_event_attr {
exclude_callchain_kernel : 1, /* exclude kernel callchains */
exclude_callchain_user : 1, /* exclude user callchains */
+ mmap2 : 1, /* include mmap with inode data */
- __reserved_1 : 41;
+ __reserved_1 : 40;
union {
__u32 wakeup_events; /* wakeup every n events */
@@ -321,6 +324,7 @@ struct perf_event_attr {
#define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64)
#define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5)
#define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *)
+#define PERF_EVENT_IOC_ID _IOR('$', 7, u64 *)
enum perf_event_ioc_flags {
PERF_IOC_FLAG_GROUP = 1U << 0,
@@ -375,9 +379,12 @@ struct perf_event_mmap_page {
__u64 time_running; /* time event on cpu */
union {
__u64 capabilities;
- __u64 cap_usr_time : 1,
- cap_usr_rdpmc : 1,
- cap_____res : 62;
+ struct {
+ __u64 cap_usr_time : 1,
+ cap_usr_rdpmc : 1,
+ cap_usr_time_zero : 1,
+ cap_____res : 61;
+ };
};
/*
@@ -418,12 +425,29 @@ struct perf_event_mmap_page {
__u16 time_shift;
__u32 time_mult;
__u64 time_offset;
+ /*
+ * If cap_usr_time_zero, the hardware clock (e.g. TSC) can be calculated
+ * from sample timestamps.
+ *
+ * time = timestamp - time_zero;
+ * quot = time / time_mult;
+ * rem = time % time_mult;
+ * cyc = (quot << time_shift) + (rem << time_shift) / time_mult;
+ *
+ * And vice versa:
+ *
+ * quot = cyc >> time_shift;
+ * rem = cyc & ((1 << time_shift) - 1);
+ * timestamp = time_zero + quot * time_mult +
+ * ((rem * time_mult) >> time_shift);
+ */
+ __u64 time_zero;
/*
* Hole for extension of the self monitor capabilities
*/
- __u64 __reserved[120]; /* align to 1k */
+ __u64 __reserved[119]; /* align to 1k */
/*
* Control data for the mmap() data buffer.
@@ -471,13 +495,28 @@ enum perf_event_type {
/*
* If perf_event_attr.sample_id_all is set then all event types will
* have the sample_type selected fields related to where/when
- * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
- * described in PERF_RECORD_SAMPLE below, it will be stashed just after
- * the perf_event_header and the fields already present for the existing
- * fields, i.e. at the end of the payload. That way a newer perf.data
- * file will be supported by older perf tools, with these new optional
- * fields being ignored.
+ * (identity) an event took place (TID, TIME, ID, STREAM_ID, CPU,
+ * IDENTIFIER) described in PERF_RECORD_SAMPLE below, it will be stashed
+ * just after the perf_event_header and the fields already present for
+ * the existing fields, i.e. at the end of the payload. That way a newer
+ * perf.data file will be supported by older perf tools, with these new
+ * optional fields being ignored.
+ *
+ * struct sample_id {
+ * { u32 pid, tid; } && PERF_SAMPLE_TID
+ * { u64 time; } && PERF_SAMPLE_TIME
+ * { u64 id; } && PERF_SAMPLE_ID
+ * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID
+ * { u32 cpu, res; } && PERF_SAMPLE_CPU
+ * { u64 id; } && PERF_SAMPLE_IDENTIFIER
+ * } && perf_event_attr::sample_id_all
*
+ * Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. The
+ * advantage of PERF_SAMPLE_IDENTIFIER is that its position is fixed
+ * relative to header.size.
+ */
+
+ /*
* The MMAP events record the PROT_EXEC mappings so that we can
* correlate userspace IPs to code. They have the following structure:
*
@@ -498,6 +537,7 @@ enum perf_event_type {
* struct perf_event_header header;
* u64 id;
* u64 lost;
+ * struct sample_id sample_id;
* };
*/
PERF_RECORD_LOST = 2,
@@ -508,6 +548,7 @@ enum perf_event_type {
*
* u32 pid, tid;
* char comm[];
+ * struct sample_id sample_id;
* };
*/
PERF_RECORD_COMM = 3,
@@ -518,6 +559,7 @@ enum perf_event_type {
* u32 pid, ppid;
* u32 tid, ptid;
* u64 time;
+ * struct sample_id sample_id;
* };
*/
PERF_RECORD_EXIT = 4,
@@ -528,6 +570,7 @@ enum perf_event_type {
* u64 time;
* u64 id;
* u64 stream_id;
+ * struct sample_id sample_id;
* };
*/
PERF_RECORD_THROTTLE = 5,
@@ -539,6 +582,7 @@ enum perf_event_type {
* u32 pid, ppid;
* u32 tid, ptid;
* u64 time;
+ * struct sample_id sample_id;
* };
*/
PERF_RECORD_FORK = 7,
@@ -549,6 +593,7 @@ enum perf_event_type {
* u32 pid, tid;
*
* struct read_format values;
+ * struct sample_id sample_id;
* };
*/
PERF_RECORD_READ = 8,
@@ -557,6 +602,13 @@ enum perf_event_type {
* struct {
* struct perf_event_header header;
*
+ * #
+ * # Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID.
+ * # The advantage of PERF_SAMPLE_IDENTIFIER is that its position
+ * # is fixed relative to header.
+ * #
+ *
+ * { u64 id; } && PERF_SAMPLE_IDENTIFIER
* { u64 ip; } && PERF_SAMPLE_IP
* { u32 pid, tid; } && PERF_SAMPLE_TID
* { u64 time; } && PERF_SAMPLE_TIME
@@ -596,11 +648,32 @@ enum perf_event_type {
* u64 dyn_size; } && PERF_SAMPLE_STACK_USER
*
* { u64 weight; } && PERF_SAMPLE_WEIGHT
- * { u64 data_src; } && PERF_SAMPLE_DATA_SRC
+ * { u64 data_src; } && PERF_SAMPLE_DATA_SRC
* };
*/
PERF_RECORD_SAMPLE = 9,
+ /*
+ * The MMAP2 records are an augmented version of MMAP, they add
+ * maj, min, ino numbers to be used to uniquely identify each mapping
+ *
+ * struct {
+ * struct perf_event_header header;
+ *
+ * u32 pid, tid;
+ * u64 addr;
+ * u64 len;
+ * u64 pgoff;
+ * u32 maj;
+ * u32 min;
+ * u64 ino;
+ * u64 ino_generation;
+ * char filename[];
+ * struct sample_id sample_id;
+ * };
+ */
+ PERF_RECORD_MMAP2 = 10,
+
PERF_RECORD_MAX, /* non-ABI */
};
@@ -685,4 +758,28 @@ union perf_mem_data_src {
#define PERF_MEM_S(a, s) \
(((u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
+/*
+ * single taken branch record layout:
+ *
+ * from: source instruction (may not always be a branch insn)
+ * to: branch target
+ * mispred: branch target was mispredicted
+ * predicted: branch target was predicted
+ *
+ * support for mispred, predicted is optional. In case it
+ * is not supported mispred = predicted = 0.
+ *
+ * in_tx: running in a hardware transaction
+ * abort: aborting a hardware transaction
+ */
+struct perf_branch_entry {
+ __u64 from;
+ __u64 to;
+ __u64 mispred:1, /* target mispredicted */
+ predicted:1,/* target predicted */
+ in_tx:1, /* in transaction */
+ abort:1, /* transaction abort */
+ reserved:60;
+};
+
#endif /* _UAPI_LINUX_PERF_EVENT_H */
diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
index 09d62b9228ff..9b829134d422 100644
--- a/include/uapi/linux/pkt_sched.h
+++ b/include/uapi/linux/pkt_sched.h
@@ -744,4 +744,45 @@ struct tc_fq_codel_xstats {
};
};
+/* FQ */
+
+enum {
+ TCA_FQ_UNSPEC,
+
+ TCA_FQ_PLIMIT, /* limit of total number of packets in queue */
+
+ TCA_FQ_FLOW_PLIMIT, /* limit of packets per flow */
+
+ TCA_FQ_QUANTUM, /* RR quantum */
+
+ TCA_FQ_INITIAL_QUANTUM, /* RR quantum for new flow */
+
+ TCA_FQ_RATE_ENABLE, /* enable/disable rate limiting */
+
+ TCA_FQ_FLOW_DEFAULT_RATE,/* for sockets with unspecified sk_rate,
+ * use the following rate
+ */
+
+ TCA_FQ_FLOW_MAX_RATE, /* per flow max rate */
+
+ TCA_FQ_BUCKETS_LOG, /* log2(number of buckets) */
+ __TCA_FQ_MAX
+};
+
+#define TCA_FQ_MAX (__TCA_FQ_MAX - 1)
+
+struct tc_fq_qd_stats {
+ __u64 gc_flows;
+ __u64 highprio_packets;
+ __u64 tcp_retrans;
+ __u64 throttled;
+ __u64 flows_plimit;
+ __u64 pkts_too_long;
+ __u64 allocation_errors;
+ __s64 time_next_delayed_flow;
+ __u32 flows;
+ __u32 inactive_flows;
+ __u32 throttled_flows;
+ __u32 pad;
+};
#endif
diff --git a/include/uapi/linux/reiserfs_xattr.h b/include/uapi/linux/reiserfs_xattr.h
index d8ce17c2459a..38fdd648be21 100644
--- a/include/uapi/linux/reiserfs_xattr.h
+++ b/include/uapi/linux/reiserfs_xattr.h
@@ -16,7 +16,7 @@ struct reiserfs_xattr_header {
};
struct reiserfs_security_handle {
- char *name;
+ const char *name;
void *value;
size_t length;
};
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index 66b466e4ca08..ca451e99b28b 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -28,7 +28,7 @@
*
* Please send any bug reports or fixes you make to the
* email address(es):
- * lksctp developers <lksctp-developers@lists.sourceforge.net>
+ * lksctp developers <linux-sctp@vger.kernel.org>
*
* Or submit a bug report through the following website:
* http://www.sf.net/projects/lksctp
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 9119cc0977bf..b47dba2c1e6f 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -232,4 +232,10 @@
/* SH-SCI */
#define PORT_HSCIF 104
+/* ST ASC type numbers */
+#define PORT_ASC 105
+
+/* Tilera TILE-Gx UART */
+#define PORT_TILEGX 106
+
#endif /* _UAPILINUX_SERIAL_CORE_H */
diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h
index a1356d3b54df..1bdb4a39d1e1 100644
--- a/include/uapi/linux/snmp.h
+++ b/include/uapi/linux/snmp.h
@@ -51,6 +51,10 @@ enum
IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */
IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */
IPSTATS_MIB_CSUMERRORS, /* InCsumErrors */
+ IPSTATS_MIB_NOECTPKTS, /* InNoECTPkts */
+ IPSTATS_MIB_ECT1PKTS, /* InECT1Pkts */
+ IPSTATS_MIB_ECT0PKTS, /* InECT0Pkts */
+ IPSTATS_MIB_CEPKTS, /* InCEPkts */
__IPSTATS_MIB_MAX
};
diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h
index 8d776ebc4829..377f1e59411d 100644
--- a/include/uapi/linux/tcp.h
+++ b/include/uapi/linux/tcp.h
@@ -111,6 +111,7 @@ enum {
#define TCP_REPAIR_OPTIONS 22
#define TCP_FASTOPEN 23 /* Enable FastOpen on listeners */
#define TCP_TIMESTAMP 24
+#define TCP_NOTSENT_LOWAT 25 /* limit number of unsent bytes in write queue */
struct tcp_repair_opt {
__u32 opt_code;
diff --git a/include/uapi/linux/uhid.h b/include/uapi/linux/uhid.h
index e9ed951e2b09..414b74be4da1 100644
--- a/include/uapi/linux/uhid.h
+++ b/include/uapi/linux/uhid.h
@@ -30,7 +30,7 @@ enum uhid_event_type {
UHID_OPEN,
UHID_CLOSE,
UHID_OUTPUT,
- UHID_OUTPUT_EV,
+ UHID_OUTPUT_EV, /* obsolete! */
UHID_INPUT,
UHID_FEATURE,
UHID_FEATURE_ANSWER,
@@ -69,6 +69,8 @@ struct uhid_output_req {
__u8 rtype;
} __attribute__((__packed__));
+/* Obsolete! Newer kernels will no longer send these events but instead convert
+ * it into raw output reports via UHID_OUTPUT. */
struct uhid_output_ev_req {
__u16 type;
__u16 code;
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index e90a88a8708f..083bb5a5aae2 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -161,6 +161,8 @@ enum v4l2_colorfx {
#define V4L2_CID_USER_SI476X_BASE (V4L2_CID_USER_BASE + 0x1040)
/* MPEG-class control IDs */
+/* The MPEG controls are applicable to all codec controls
+ * and the 'MPEG' part of the define is historical */
#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900)
#define V4L2_CID_MPEG_CLASS (V4L2_CTRL_CLASS_MPEG | 1)
@@ -522,6 +524,33 @@ enum v4l2_mpeg_video_mpeg4_profile {
};
#define V4L2_CID_MPEG_VIDEO_MPEG4_QPEL (V4L2_CID_MPEG_BASE+407)
+/* Control IDs for VP8 streams
+ * Although VP8 is not part of MPEG we add these controls to the MPEG class
+ * as that class is already handling other video compression standards
+ */
+#define V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS (V4L2_CID_MPEG_BASE+500)
+enum v4l2_vp8_num_partitions {
+ V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION = 0,
+ V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS = 1,
+ V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS = 2,
+ V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS = 3,
+};
+#define V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4 (V4L2_CID_MPEG_BASE+501)
+#define V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES (V4L2_CID_MPEG_BASE+502)
+enum v4l2_vp8_num_ref_frames {
+ V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME = 0,
+ V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME = 1,
+ V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME = 2,
+};
+#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL (V4L2_CID_MPEG_BASE+503)
+#define V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS (V4L2_CID_MPEG_BASE+504)
+#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD (V4L2_CID_MPEG_BASE+505)
+#define V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL (V4L2_CID_MPEG_BASE+506)
+enum v4l2_vp8_golden_frame_sel {
+ V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV = 0,
+ V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD = 1,
+};
+
/* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */
#define V4L2_CID_MPEG_CX2341X_BASE (V4L2_CTRL_CLASS_MPEG | 0x1000)
#define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_MPEG_CX2341X_BASE+0)
diff --git a/include/uapi/linux/v4l2-dv-timings.h b/include/uapi/linux/v4l2-dv-timings.h
index 4e0c58d25ff0..be709fe29552 100644
--- a/include/uapi/linux/v4l2-dv-timings.h
+++ b/include/uapi/linux/v4l2-dv-timings.h
@@ -823,12 +823,4 @@
V4L2_DV_FL_REDUCED_BLANKING) \
}
-#define V4L2_DV_BT_DMT_1366X768P60 { \
- .type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(1366, 768, 0, \
- V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
- 85500000, 70, 143, 213, 3, 3, 24, 0, 0, 0, \
- V4L2_DV_BT_STD_DMT, 0) \
-}
-
#endif
diff --git a/include/uapi/linux/v4l2-mediabus.h b/include/uapi/linux/v4l2-mediabus.h
index 6ee63d09b32d..a9601257bb43 100644
--- a/include/uapi/linux/v4l2-mediabus.h
+++ b/include/uapi/linux/v4l2-mediabus.h
@@ -37,7 +37,7 @@
enum v4l2_mbus_pixelcode {
V4L2_MBUS_FMT_FIXED = 0x0001,
- /* RGB - next is 0x100d */
+ /* RGB - next is 0x100e */
V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE = 0x1001,
V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE = 0x1002,
V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE = 0x1003,
@@ -50,8 +50,9 @@ enum v4l2_mbus_pixelcode {
V4L2_MBUS_FMT_RGB888_1X24 = 0x100a,
V4L2_MBUS_FMT_RGB888_2X12_BE = 0x100b,
V4L2_MBUS_FMT_RGB888_2X12_LE = 0x100c,
+ V4L2_MBUS_FMT_ARGB8888_1X32 = 0x100d,
- /* YUV (including grey) - next is 0x2017 */
+ /* YUV (including grey) - next is 0x2018 */
V4L2_MBUS_FMT_Y8_1X8 = 0x2001,
V4L2_MBUS_FMT_UV8_1X8 = 0x2015,
V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002,
@@ -74,6 +75,7 @@ enum v4l2_mbus_pixelcode {
V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d,
V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e,
V4L2_MBUS_FMT_YUV10_1X30 = 0x2016,
+ V4L2_MBUS_FMT_AYUV8_1X32 = 0x2017,
/* Bayer - next is 0x3019 */
V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001,
diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 916e444e6f74..0fd47f5bc146 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -324,6 +324,44 @@ enum {
VFIO_PCI_NUM_IRQS
};
+/**
+ * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12,
+ * struct vfio_pci_hot_reset_info)
+ *
+ * Return: 0 on success, -errno on failure:
+ * -enospc = insufficient buffer, -enodev = unsupported for device.
+ */
+struct vfio_pci_dependent_device {
+ __u32 group_id;
+ __u16 segment;
+ __u8 bus;
+ __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */
+};
+
+struct vfio_pci_hot_reset_info {
+ __u32 argsz;
+ __u32 flags;
+ __u32 count;
+ struct vfio_pci_dependent_device devices[];
+};
+
+#define VFIO_DEVICE_GET_PCI_HOT_RESET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+/**
+ * VFIO_DEVICE_PCI_HOT_RESET - _IOW(VFIO_TYPE, VFIO_BASE + 13,
+ * struct vfio_pci_hot_reset)
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_pci_hot_reset {
+ __u32 argsz;
+ __u32 flags;
+ __u32 count;
+ __s32 group_fds[];
+};
+
+#define VFIO_DEVICE_PCI_HOT_RESET _IO(VFIO_TYPE, VFIO_BASE + 13)
+
/* -------- API for Type1 VFIO IOMMU -------- */
/**
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 95ef4551edc1..437f1b0f8937 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -348,6 +348,8 @@ struct v4l2_pix_format {
/* two non contiguous planes - one Y, one Cr + Cb interleaved */
#define V4L2_PIX_FMT_NV12M v4l2_fourcc('N', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 */
#define V4L2_PIX_FMT_NV21M v4l2_fourcc('N', 'M', '2', '1') /* 21 Y/CrCb 4:2:0 */
+#define V4L2_PIX_FMT_NV16M v4l2_fourcc('N', 'M', '1', '6') /* 16 Y/CbCr 4:2:2 */
+#define V4L2_PIX_FMT_NV61M v4l2_fourcc('N', 'M', '6', '1') /* 16 Y/CrCb 4:2:2 */
#define V4L2_PIX_FMT_NV12MT v4l2_fourcc('T', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 64x32 macroblocks */
#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12 Y/CbCr 4:2:0 16x16 macroblocks */
@@ -1055,6 +1057,16 @@ struct v4l2_bt_timings {
or used depends on the hardware. */
#define V4L2_DV_FL_HALF_LINE (1 << 3)
+/* A few useful defines to calculate the total blanking and frame sizes */
+#define V4L2_DV_BT_BLANKING_WIDTH(bt) \
+ (bt->hfrontporch + bt->hsync + bt->hbackporch)
+#define V4L2_DV_BT_FRAME_WIDTH(bt) \
+ (bt->width + V4L2_DV_BT_BLANKING_WIDTH(bt))
+#define V4L2_DV_BT_BLANKING_HEIGHT(bt) \
+ (bt->vfrontporch + bt->vsync + bt->vbackporch + \
+ bt->il_vfrontporch + bt->il_vsync + bt->il_vbackporch)
+#define V4L2_DV_BT_FRAME_HEIGHT(bt) \
+ (bt->height + V4L2_DV_BT_BLANKING_HEIGHT(bt))
/** struct v4l2_dv_timings - DV timings
* @type: the type of the timings
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h
index c520203fac2f..172a7f00780c 100644
--- a/include/uapi/linux/virtio_net.h
+++ b/include/uapi/linux/virtio_net.h
@@ -60,7 +60,7 @@
struct virtio_net_config {
/* The config defining mac address (if VIRTIO_NET_F_MAC) */
- __u8 mac[6];
+ __u8 mac[ETH_ALEN];
/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
__u16 status;
/* Maximum number of each of transmit and receive queues;
@@ -70,7 +70,9 @@ struct virtio_net_config {
__u16 max_virtqueue_pairs;
} __attribute__((packed));
-/* This is the first element of the scatter-gather list. If you don't
+/* This header comes first in the scatter-gather list.
+ * If VIRTIO_F_ANY_LAYOUT is not negotiated, it must
+ * be the first element of the scatter-gather list. If you don't
* specify GSO or CSUM features, you can simply ignore the header. */
struct virtio_net_hdr {
#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset
diff --git a/include/uapi/linux/wimax/i2400m.h b/include/uapi/linux/wimax/i2400m.h
index 62d356153565..fd198bc24a3c 100644
--- a/include/uapi/linux/wimax/i2400m.h
+++ b/include/uapi/linux/wimax/i2400m.h
@@ -122,7 +122,7 @@
#define __LINUX__WIMAX__I2400M_H__
#include <linux/types.h>
-
+#include <linux/if_ether.h>
/*
* Host Device Interface (HDI) common to all busses
@@ -487,7 +487,7 @@ struct i2400m_tlv_l4_message_versions {
struct i2400m_tlv_detailed_device_info {
struct i2400m_tlv_hdr hdr;
__u8 reserved1[400];
- __u8 mac_address[6];
+ __u8 mac_address[ETH_ALEN];
__u8 reserved2[2];
} __attribute__((packed));
diff --git a/include/uapi/rdma/ib_user_verbs.h b/include/uapi/rdma/ib_user_verbs.h
index 805711ea2005..0b233c56b0e4 100644
--- a/include/uapi/rdma/ib_user_verbs.h
+++ b/include/uapi/rdma/ib_user_verbs.h
@@ -43,6 +43,7 @@
* compatibility are made.
*/
#define IB_USER_VERBS_ABI_VERSION 6
+#define IB_USER_VERBS_CMD_THRESHOLD 50
enum {
IB_USER_VERBS_CMD_GET_CONTEXT,
@@ -85,7 +86,9 @@ enum {
IB_USER_VERBS_CMD_OPEN_XRCD,
IB_USER_VERBS_CMD_CLOSE_XRCD,
IB_USER_VERBS_CMD_CREATE_XSRQ,
- IB_USER_VERBS_CMD_OPEN_QP
+ IB_USER_VERBS_CMD_OPEN_QP,
+ IB_USER_VERBS_CMD_CREATE_FLOW = IB_USER_VERBS_CMD_THRESHOLD,
+ IB_USER_VERBS_CMD_DESTROY_FLOW
};
/*
@@ -123,6 +126,15 @@ struct ib_uverbs_cmd_hdr {
__u16 out_words;
};
+struct ib_uverbs_cmd_hdr_ex {
+ __u32 command;
+ __u16 in_words;
+ __u16 out_words;
+ __u16 provider_in_words;
+ __u16 provider_out_words;
+ __u32 cmd_hdr_reserved;
+};
+
struct ib_uverbs_get_context {
__u64 response;
__u64 driver_data[0];
@@ -684,6 +696,91 @@ struct ib_uverbs_detach_mcast {
__u64 driver_data[0];
};
+struct ib_kern_eth_filter {
+ __u8 dst_mac[6];
+ __u8 src_mac[6];
+ __be16 ether_type;
+ __be16 vlan_tag;
+};
+
+struct ib_kern_spec_eth {
+ __u32 type;
+ __u16 size;
+ __u16 reserved;
+ struct ib_kern_eth_filter val;
+ struct ib_kern_eth_filter mask;
+};
+
+struct ib_kern_ipv4_filter {
+ __be32 src_ip;
+ __be32 dst_ip;
+};
+
+struct ib_kern_spec_ipv4 {
+ __u32 type;
+ __u16 size;
+ __u16 reserved;
+ struct ib_kern_ipv4_filter val;
+ struct ib_kern_ipv4_filter mask;
+};
+
+struct ib_kern_tcp_udp_filter {
+ __be16 dst_port;
+ __be16 src_port;
+};
+
+struct ib_kern_spec_tcp_udp {
+ __u32 type;
+ __u16 size;
+ __u16 reserved;
+ struct ib_kern_tcp_udp_filter val;
+ struct ib_kern_tcp_udp_filter mask;
+};
+
+struct ib_kern_spec {
+ union {
+ struct {
+ __u32 type;
+ __u16 size;
+ __u16 reserved;
+ };
+ struct ib_kern_spec_eth eth;
+ struct ib_kern_spec_ipv4 ipv4;
+ struct ib_kern_spec_tcp_udp tcp_udp;
+ };
+};
+
+struct ib_kern_flow_attr {
+ __u32 type;
+ __u16 size;
+ __u16 priority;
+ __u8 num_of_specs;
+ __u8 reserved[2];
+ __u8 port;
+ __u32 flags;
+ /* Following are the optional layers according to user request
+ * struct ib_flow_spec_xxx
+ * struct ib_flow_spec_yyy
+ */
+};
+
+struct ib_uverbs_create_flow {
+ __u32 comp_mask;
+ __u64 response;
+ __u32 qp_handle;
+ struct ib_kern_flow_attr flow_attr;
+};
+
+struct ib_uverbs_create_flow_resp {
+ __u32 comp_mask;
+ __u32 flow_handle;
+};
+
+struct ib_uverbs_destroy_flow {
+ __u32 comp_mask;
+ __u32 flow_handle;
+};
+
struct ib_uverbs_create_srq {
__u64 response;
__u64 user_handle;
diff --git a/include/uapi/sound/hdspm.h b/include/uapi/sound/hdspm.h
index 1f59ea2a4a76..d956c3593f65 100644
--- a/include/uapi/sound/hdspm.h
+++ b/include/uapi/sound/hdspm.h
@@ -111,7 +111,7 @@ struct hdspm_ltc {
enum hdspm_ltc_input_format input_format;
};
-#define SNDRV_HDSPM_IOCTL_GET_LTC _IOR('H', 0x46, struct hdspm_mixer_ioctl)
+#define SNDRV_HDSPM_IOCTL_GET_LTC _IOR('H', 0x46, struct hdspm_ltc)
/**
* The status data reflects the device's current state