diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/i2c.h | 33 |
1 files changed, 15 insertions, 18 deletions
diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 465afb092fa7..36f357ecdf67 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -564,6 +564,7 @@ struct i2c_lock_operations { * @scl_fall_ns: time SCL signal takes to fall in ns; t(f) in the I2C specification * @scl_int_delay_ns: time IP core additionally needs to setup SCL in ns * @sda_fall_ns: time SDA signal takes to fall in ns; t(f) in the I2C specification + * @sda_hold_ns: time IP core additionally needs to hold SDA in ns */ struct i2c_timings { u32 bus_freq_hz; @@ -571,6 +572,7 @@ struct i2c_timings { u32 scl_fall_ns; u32 scl_int_delay_ns; u32 sda_fall_ns; + u32 sda_hold_ns; }; /** @@ -581,12 +583,14 @@ struct i2c_timings { * recovery. Populated internally for generic GPIO recovery. * @set_scl: This sets/clears the SCL line. Mandatory for generic SCL recovery. * Populated internally for generic GPIO recovery. - * @get_sda: This gets current value of SDA line. Optional for generic SCL - * recovery. Populated internally, if sda_gpio is a valid GPIO, for generic - * GPIO recovery. - * @set_sda: This sets/clears the SDA line. Optional for generic SCL recovery. - * Populated internally, if sda_gpio is a valid GPIO, for generic GPIO - * recovery. + * @get_sda: This gets current value of SDA line. This or set_sda() is mandatory + * for generic SCL recovery. Populated internally, if sda_gpio is a valid + * GPIO, for generic GPIO recovery. + * @set_sda: This sets/clears the SDA line. This or get_sda() is mandatory for + * generic SCL recovery. Populated internally, if sda_gpio is a valid GPIO, + * for generic GPIO recovery. + * @get_bus_free: Returns the bus free state as seen from the IP core in case it + * has a more complex internal logic than just reading SDA. Optional. * @prepare_recovery: This will be called before starting recovery. Platform may * configure padmux here for SDA/SCL line or something else they want. * @unprepare_recovery: This will be called after completing recovery. Platform @@ -601,6 +605,7 @@ struct i2c_bus_recovery_info { void (*set_scl)(struct i2c_adapter *adap, int val); int (*get_sda)(struct i2c_adapter *adap); void (*set_sda)(struct i2c_adapter *adap, int val); + int (*get_bus_free)(struct i2c_adapter *adap); void (*prepare_recovery)(struct i2c_adapter *adap); void (*unprepare_recovery)(struct i2c_adapter *adap); @@ -658,6 +663,10 @@ struct i2c_adapter_quirks { I2C_AQ_COMB_READ_SECOND | I2C_AQ_COMB_SAME_ADDR) /* clock stretching is not supported */ #define I2C_AQ_NO_CLK_STRETCH BIT(4) +/* message cannot have length of 0 */ +#define I2C_AQ_NO_ZERO_LEN_READ BIT(5) +#define I2C_AQ_NO_ZERO_LEN_WRITE BIT(6) +#define I2C_AQ_NO_ZERO_LEN (I2C_AQ_NO_ZERO_LEN_READ | I2C_AQ_NO_ZERO_LEN_WRITE) /* * i2c_adapter is the structure used to identify a physical i2c bus along @@ -759,18 +768,6 @@ i2c_unlock_bus(struct i2c_adapter *adapter, unsigned int flags) adapter->lock_ops->unlock_bus(adapter, flags); } -static inline void -i2c_lock_adapter(struct i2c_adapter *adapter) -{ - i2c_lock_bus(adapter, I2C_LOCK_ROOT_ADAPTER); -} - -static inline void -i2c_unlock_adapter(struct i2c_adapter *adapter) -{ - i2c_unlock_bus(adapter, I2C_LOCK_ROOT_ADAPTER); -} - /*flags for the client struct: */ #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ |