diff options
Diffstat (limited to 'init')
| -rw-r--r-- | init/Kconfig | 38 | ||||
| -rw-r--r-- | init/calibrate.c | 75 | ||||
| -rw-r--r-- | init/main.c | 5 |
3 files changed, 84 insertions, 34 deletions
diff --git a/init/Kconfig b/init/Kconfig index d886b1e9278e..ebafac4231ee 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -485,7 +485,7 @@ config TREE_RCU_TRACE config RCU_BOOST bool "Enable RCU priority boosting" - depends on RT_MUTEXES && TINY_PREEMPT_RCU + depends on RT_MUTEXES && PREEMPT_RCU default n help This option boosts the priority of preempted RCU readers that @@ -589,14 +589,6 @@ config CGROUP_DEBUG Say N if unsure. -config CGROUP_NS - bool "Namespace cgroup subsystem" - help - Provides a simple namespace cgroup subsystem to - provide hierarchical naming of sets of namespaces, - for instance virtual servers and checkpoint/restart - jobs. - config CGROUP_FREEZER bool "Freezer cgroup subsystem" help @@ -903,7 +895,6 @@ endif config CC_OPTIMIZE_FOR_SIZE bool "Optimize for size" - default y help Enabling this option will pass "-Os" instead of "-O2" to gcc resulting in a smaller kernel. @@ -960,24 +951,18 @@ config KALLSYMS_ALL bool "Include all symbols in kallsyms" depends on DEBUG_KERNEL && KALLSYMS help - Normally kallsyms only contains the symbols of functions, for nicer - OOPS messages. Some debuggers can use kallsyms for other - symbols too: say Y here to include all symbols, if you need them - and you don't care about adding 300k to the size of your kernel. + Normally kallsyms only contains the symbols of functions for nicer + OOPS messages and backtraces (i.e., symbols from the text and inittext + sections). This is sufficient for most cases. And only in very rare + cases (e.g., when a debugger is used) all symbols are required (e.g., + names of variables from the data sections, etc). - Say N. - -config KALLSYMS_EXTRA_PASS - bool "Do an extra kallsyms pass" - depends on KALLSYMS - help - If kallsyms is not working correctly, the build will fail with - inconsistent kallsyms data. If that occurs, log a bug report and - turn on KALLSYMS_EXTRA_PASS which should result in a stable build. - Always say N here unless you find a bug in kallsyms, which must be - reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while - you wait for kallsyms to be fixed. + This option makes sure that all symbols are loaded into the kernel + image (i.e., symbols from all sections) in cost of increased kernel + size (depending on the kernel configuration, it may be 300KiB or + something like this). + Say N unless you really need all symbols. config HOTPLUG bool "Support for hot-pluggable devices" if EXPERT @@ -1226,7 +1211,6 @@ config SLAB per cpu and per node queues. config SLUB - depends on BROKEN || NUMA || !DISCONTIGMEM bool "SLUB (Unqueued Allocator)" help SLUB is a slab allocator that minimizes cache line usage diff --git a/init/calibrate.c b/init/calibrate.c index 76ac9194cbc4..cfd7000c9d71 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -38,6 +38,9 @@ static unsigned long __cpuinit calibrate_delay_direct(void) unsigned long timer_rate_min, timer_rate_max; unsigned long good_timer_sum = 0; unsigned long good_timer_count = 0; + unsigned long measured_times[MAX_DIRECT_CALIBRATION_RETRIES]; + int max = -1; /* index of measured_times with max/min values or not set */ + int min = -1; int i; if (read_current_timer(&pre_start) < 0 ) @@ -90,18 +93,78 @@ static unsigned long __cpuinit calibrate_delay_direct(void) * If the upper limit and lower limit of the timer_rate is * >= 12.5% apart, redo calibration. */ - if (pre_start != 0 && pre_end != 0 && + printk(KERN_DEBUG "calibrate_delay_direct() timer_rate_max=%lu " + "timer_rate_min=%lu pre_start=%lu pre_end=%lu\n", + timer_rate_max, timer_rate_min, pre_start, pre_end); + if (start >= post_end) + printk(KERN_NOTICE "calibrate_delay_direct() ignoring " + "timer_rate as we had a TSC wrap around" + " start=%lu >=post_end=%lu\n", + start, post_end); + if (start < post_end && pre_start != 0 && pre_end != 0 && (timer_rate_max - timer_rate_min) < (timer_rate_max >> 3)) { good_timer_count++; good_timer_sum += timer_rate_max; - } + measured_times[i] = timer_rate_max; + if (max < 0 || timer_rate_max > measured_times[max]) + max = i; + if (min < 0 || timer_rate_max < measured_times[min]) + min = i; + } else + measured_times[i] = 0; + } - if (good_timer_count) - return (good_timer_sum/good_timer_count); + /* + * Find the maximum & minimum - if they differ too much throw out the + * one with the largest difference from the mean and try again... + */ + while (good_timer_count > 1) { + unsigned long estimate; + unsigned long maxdiff; + + /* compute the estimate */ + estimate = (good_timer_sum/good_timer_count); + maxdiff = estimate >> 3; + + /* if range is within 12% let's take it */ + if ((measured_times[max] - measured_times[min]) < maxdiff) + return estimate; + + /* ok - drop the worse value and try again... */ + good_timer_sum = 0; + good_timer_count = 0; + if ((measured_times[max] - estimate) < + (estimate - measured_times[min])) { + printk(KERN_NOTICE "calibrate_delay_direct() dropping " + "min bogoMips estimate %d = %lu\n", + min, measured_times[min]); + measured_times[min] = 0; + min = max; + } else { + printk(KERN_NOTICE "calibrate_delay_direct() dropping " + "max bogoMips estimate %d = %lu\n", + max, measured_times[max]); + measured_times[max] = 0; + max = min; + } + + for (i = 0; i < MAX_DIRECT_CALIBRATION_RETRIES; i++) { + if (measured_times[i] == 0) + continue; + good_timer_count++; + good_timer_sum += measured_times[i]; + if (measured_times[i] < measured_times[min]) + min = i; + if (measured_times[i] > measured_times[max]) + max = i; + } + + } - printk(KERN_WARNING "calibrate_delay_direct() failed to get a good " - "estimate for loops_per_jiffy.\nProbably due to long platform interrupts. Consider using \"lpj=\" boot option.\n"); + printk(KERN_NOTICE "calibrate_delay_direct() failed to get a good " + "estimate for loops_per_jiffy.\nProbably due to long platform " + "interrupts. Consider using \"lpj=\" boot option.\n"); return 0; } #else diff --git a/init/main.c b/init/main.c index 4a9479ef4540..cafba67c13bf 100644 --- a/init/main.c +++ b/init/main.c @@ -487,6 +487,7 @@ asmlinkage void __init start_kernel(void) printk(KERN_NOTICE "%s", linux_banner); setup_arch(&command_line); mm_init_owner(&init_mm, &init_task); + mm_init_cpumask(&init_mm); setup_command_line(command_line); setup_nr_cpu_ids(); setup_per_cpu_areas(); @@ -504,11 +505,13 @@ asmlinkage void __init start_kernel(void) * These use large bootmem allocations and must precede * kmem_cache_init() */ + setup_log_buf(0); pidhash_init(); vfs_caches_init_early(); sort_main_extable(); trap_init(); mm_init(); + /* * Set up the scheduler prior starting any interrupts (such as the * timer interrupt). Full topology setup happens at smp_init() @@ -580,8 +583,8 @@ asmlinkage void __init start_kernel(void) #endif page_cgroup_init(); enable_debug_pagealloc(); - kmemleak_init(); debug_objects_mem_init(); + kmemleak_init(); setup_per_cpu_pageset(); numa_policy_init(); if (late_time_init) |