diff options
Diffstat (limited to 'net/dsa')
| -rw-r--r-- | net/dsa/Kconfig | 31 | ||||
| -rw-r--r-- | net/dsa/Makefile | 9 | ||||
| -rw-r--r-- | net/dsa/dsa.c | 369 | ||||
| -rw-r--r-- | net/dsa/dsa_priv.h | 110 | ||||
| -rw-r--r-- | net/dsa/mv88e6123_61_65.c | 417 | ||||
| -rw-r--r-- | net/dsa/mv88e6xxx.c | 377 | ||||
| -rw-r--r-- | net/dsa/mv88e6xxx.h | 77 | ||||
| -rw-r--r-- | net/dsa/slave.c | 288 | ||||
| -rw-r--r-- | net/dsa/tag_edsa.c | 213 |
9 files changed, 1891 insertions, 0 deletions
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig new file mode 100644 index 000000000000..7cf55e5eb39f --- /dev/null +++ b/net/dsa/Kconfig @@ -0,0 +1,31 @@ +menuconfig NET_DSA + bool "Distributed Switch Architecture support" + default n + depends on EXPERIMENTAL + ---help--- + This allows you to use hardware switch chips that use + the Distributed Switch Architecture. + + +if NET_DSA + +# tagging formats +config NET_DSA_TAG_EDSA + bool + default n + + +# switch drivers +config NET_DSA_MV88E6XXX + bool + default n + +config NET_DSA_MV88E6123_61_65 + bool "Marvell 88E6123/6161/6165 ethernet switch chip support" + select NET_DSA_MV88E6XXX + select NET_DSA_TAG_EDSA + ---help--- + This enables support for the Marvell 88E6123/6161/6165 + ethernet switch chips. + +endif diff --git a/net/dsa/Makefile b/net/dsa/Makefile new file mode 100644 index 000000000000..b59a6f6bcf56 --- /dev/null +++ b/net/dsa/Makefile @@ -0,0 +1,9 @@ +# tagging formats +obj-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o + +# switch drivers +obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o +obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o + +# the core +obj-$(CONFIG_NET_DSA) += dsa.o slave.o diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c new file mode 100644 index 000000000000..6cc5be2ec7f1 --- /dev/null +++ b/net/dsa/dsa.c @@ -0,0 +1,369 @@ +/* + * net/dsa/dsa.c - Hardware switch handling + * Copyright (c) 2008 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/list.h> +#include <linux/netdevice.h> +#include <linux/platform_device.h> +#include <net/dsa.h> +#include "dsa_priv.h" + +char dsa_driver_version[] = "0.1"; + + +/* switch driver registration ***********************************************/ +static DEFINE_MUTEX(dsa_switch_drivers_mutex); +static LIST_HEAD(dsa_switch_drivers); + +void register_switch_driver(struct dsa_switch_driver *drv) +{ + mutex_lock(&dsa_switch_drivers_mutex); + list_add_tail(&drv->list, &dsa_switch_drivers); + mutex_unlock(&dsa_switch_drivers_mutex); +} + +void unregister_switch_driver(struct dsa_switch_driver *drv) +{ + mutex_lock(&dsa_switch_drivers_mutex); + list_del_init(&drv->list); + mutex_unlock(&dsa_switch_drivers_mutex); +} + +static struct dsa_switch_driver * +dsa_switch_probe(struct mii_bus *bus, int sw_addr, char **_name) +{ + struct dsa_switch_driver *ret; + struct list_head *list; + char *name; + + ret = NULL; + name = NULL; + + mutex_lock(&dsa_switch_drivers_mutex); + list_for_each(list, &dsa_switch_drivers) { + struct dsa_switch_driver *drv; + + drv = list_entry(list, struct dsa_switch_driver, list); + + name = drv->probe(bus, sw_addr); + if (name != NULL) { + ret = drv; + break; + } + } + mutex_unlock(&dsa_switch_drivers_mutex); + + *_name = name; + + return ret; +} + + +/* basic switch operations **************************************************/ +static struct dsa_switch * +dsa_switch_setup(struct device *parent, struct dsa_platform_data *pd, + struct mii_bus *bus, struct net_device *dev) +{ + struct dsa_switch *ds; + int ret; + struct dsa_switch_driver *drv; + char *name; + int i; + + /* + * Probe for switch model. + */ + drv = dsa_switch_probe(bus, pd->sw_addr, &name); + if (drv == NULL) { + printk(KERN_ERR "%s: could not detect attached switch\n", + dev->name); + return ERR_PTR(-EINVAL); + } + printk(KERN_INFO "%s: detected a %s switch\n", dev->name, name); + + + /* + * Allocate and initialise switch state. + */ + ds = kzalloc(sizeof(*ds) + drv->priv_size, GFP_KERNEL); + if (ds == NULL) + return ERR_PTR(-ENOMEM); + + ds->pd = pd; + ds->master_netdev = dev; + ds->master_mii_bus = bus; + + ds->drv = drv; + ds->tag_protocol = drv->tag_protocol; + + + /* + * Validate supplied switch configuration. + */ + ds->cpu_port = -1; + for (i = 0; i < DSA_MAX_PORTS; i++) { + char *name; + + name = pd->port_names[i]; + if (name == NULL) + continue; + + if (!strcmp(name, "cpu")) { + if (ds->cpu_port != -1) { + printk(KERN_ERR "multiple cpu ports?!\n"); + ret = -EINVAL; + goto out; + } + ds->cpu_port = i; + } else { + ds->valid_port_mask |= 1 << i; + } + } + + if (ds->cpu_port == -1) { + printk(KERN_ERR "no cpu port?!\n"); + ret = -EINVAL; + goto out; + } + + + /* + * If we use a tagging format that doesn't have an ethertype + * field, make sure that all packets from this point on get + * sent to the tag format's receive function. (Which will + * discard received packets until we set ds->ports[] below.) + */ + wmb(); + dev->dsa_ptr = (void *)ds; + + + /* + * Do basic register setup. + */ + ret = drv->setup(ds); + if (ret < 0) + goto out; + + ret = drv->set_addr(ds, dev->dev_addr); + if (ret < 0) + goto out; + + ds->slave_mii_bus = mdiobus_alloc(); + if (ds->slave_mii_bus == NULL) { + ret = -ENOMEM; + goto out; + } + dsa_slave_mii_bus_init(ds); + + ret = mdiobus_register(ds->slave_mii_bus); + if (ret < 0) + goto out_free; + + + /* + * Create network devices for physical switch ports. + */ + wmb(); + for (i = 0; i < DSA_MAX_PORTS; i++) { + struct net_device *slave_dev; + + if (!(ds->valid_port_mask & (1 << i))) + continue; + + slave_dev = dsa_slave_create(ds, parent, i, pd->port_names[i]); + if (slave_dev == NULL) { + printk(KERN_ERR "%s: can't create dsa slave " + "device for port %d(%s)\n", + dev->name, i, pd->port_names[i]); + continue; + } + + ds->ports[i] = slave_dev; + } + + return ds; + +out_free: + mdiobus_free(ds->slave_mii_bus); +out: + dev->dsa_ptr = NULL; + kfree(ds); + return ERR_PTR(ret); +} + +static void dsa_switch_destroy(struct dsa_switch *ds) +{ +} + + +/* link polling *************************************************************/ +static void dsa_link_poll_work(struct work_struct *ugly) +{ + struct dsa_switch *ds; + + ds = container_of(ugly, struct dsa_switch, link_poll_work); + + ds->drv->poll_link(ds); + mod_timer(&ds->link_poll_timer, round_jiffies(jiffies + HZ)); +} + +static void dsa_link_poll_timer(unsigned long _ds) +{ + struct dsa_switch *ds = (void *)_ds; + + schedule_work(&ds->link_poll_work); +} + + +/* platform driver init and cleanup *****************************************/ +static int dev_is_class(struct device *dev, void *class) +{ + if (dev->class != NULL && !strcmp(dev->class->name, class)) + return 1; + + return 0; +} + +static struct device *dev_find_class(struct device *parent, char *class) +{ + if (dev_is_class(parent, class)) { + get_device(parent); + return parent; + } + + return device_find_child(parent, class, dev_is_class); +} + +static struct mii_bus *dev_to_mii_bus(struct device *dev) +{ + struct device *d; + + d = dev_find_class(dev, "mdio_bus"); + if (d != NULL) { + struct mii_bus *bus; + + bus = to_mii_bus(d); + put_device(d); + + return bus; + } + + return NULL; +} + +static struct net_device *dev_to_net_device(struct device *dev) +{ + struct device *d; + + d = dev_find_class(dev, "net"); + if (d != NULL) { + struct net_device *nd; + + nd = to_net_dev(d); + dev_hold(nd); + put_device(d); + + return nd; + } + + return NULL; +} + +static int dsa_probe(struct platform_device *pdev) +{ + static int dsa_version_printed; + struct dsa_platform_data *pd = pdev->dev.platform_data; + struct net_device *dev; + struct mii_bus *bus; + struct dsa_switch *ds; + + if (!dsa_version_printed++) + printk(KERN_NOTICE "Distributed Switch Architecture " + "driver version %s\n", dsa_driver_version); + + if (pd == NULL || pd->mii_bus == NULL || pd->netdev == NULL) + return -EINVAL; + + bus = dev_to_mii_bus(pd->mii_bus); + if (bus == NULL) + return -EINVAL; + + dev = dev_to_net_device(pd->netdev); + if (dev == NULL) + return -EINVAL; + + if (dev->dsa_ptr != NULL) { + dev_put(dev); + return -EEXIST; + } + + ds = dsa_switch_setup(&pdev->dev, pd, bus, dev); + if (IS_ERR(ds)) { + dev_put(dev); + return PTR_ERR(ds); + } + + if (ds->drv->poll_link != NULL) { + INIT_WORK(&ds->link_poll_work, dsa_link_poll_work); + init_timer(&ds->link_poll_timer); + ds->link_poll_timer.data = (unsigned long)ds; + ds->link_poll_timer.function = dsa_link_poll_timer; + ds->link_poll_timer.expires = round_jiffies(jiffies + HZ); + add_timer(&ds->link_poll_timer); + } + + platform_set_drvdata(pdev, ds); + + return 0; +} + +static int dsa_remove(struct platform_device *pdev) +{ + struct dsa_switch *ds = platform_get_drvdata(pdev); + + if (ds->drv->poll_link != NULL) + del_timer_sync(&ds->link_poll_timer); + + flush_scheduled_work(); + + dsa_switch_destroy(ds); + + return 0; +} + +static void dsa_shutdown(struct platform_device *pdev) +{ +} + +static struct platform_driver dsa_driver = { + .probe = dsa_probe, + .remove = dsa_remove, + .shutdown = dsa_shutdown, + .driver = { + .name = "dsa", + .owner = THIS_MODULE, + }, +}; + +static int __init dsa_init_module(void) +{ + return platform_driver_register(&dsa_driver); +} +module_init(dsa_init_module); + +static void __exit dsa_cleanup_module(void) +{ + platform_driver_unregister(&dsa_driver); +} +module_exit(dsa_cleanup_module); + +MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>") +MODULE_DESCRIPTION("Driver for Distributed Switch Architecture switch chips"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:dsa"); diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h new file mode 100644 index 000000000000..21ee9052079a --- /dev/null +++ b/net/dsa/dsa_priv.h @@ -0,0 +1,110 @@ +/* + * net/dsa/dsa_priv.h - Hardware switch handling + * Copyright (c) 2008 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DSA_PRIV_H +#define __DSA_PRIV_H + +#include <linux/list.h> +#include <linux/phy.h> +#include <linux/timer.h> +#include <linux/workqueue.h> +#include <net/dsa.h> + +struct dsa_switch { + /* + * Configuration data for the platform device that owns + * this dsa switch instance. + */ + struct dsa_platform_data *pd; + + /* + * References to network device and mii bus to use. + */ + struct net_device *master_netdev; + struct mii_bus *master_mii_bus; + + /* + * The used switch driver and frame tagging type. + */ + struct dsa_switch_driver *drv; + __be16 tag_protocol; + + /* + * Slave mii_bus and devices for the individual ports. + */ + int cpu_port; + u32 valid_port_mask; + struct mii_bus *slave_mii_bus; + struct net_device *ports[DSA_MAX_PORTS]; + + /* + * Link state polling. + */ + struct work_struct link_poll_work; + struct timer_list link_poll_timer; +}; + +struct dsa_slave_priv { + struct net_device *dev; + struct dsa_switch *parent; + int port; + struct phy_device *phy; +}; + +struct dsa_switch_driver { + struct list_head list; + + __be16 tag_protocol; + int priv_size; + + /* + * Probing and setup. + */ + char *(*probe)(struct mii_bus *bus, int sw_addr); + int (*setup)(struct dsa_switch *ds); + int (*set_addr)(struct dsa_switch *ds, u8 *addr); + + /* + * Access to the switch's PHY registers. + */ + int (*phy_read)(struct dsa_switch *ds, int port, int regnum); + int (*phy_write)(struct dsa_switch *ds, int port, + int regnum, u16 val); + + /* + * Link state polling and IRQ handling. + */ + void (*poll_link)(struct dsa_switch *ds); + + /* + * ethtool hardware statistics. + */ + void (*get_strings)(struct dsa_switch *ds, int port, uint8_t *data); + void (*get_ethtool_stats)(struct dsa_switch *ds, + int port, uint64_t *data); + int (*get_sset_count)(struct dsa_switch *ds); +}; + +/* dsa.c */ +extern char dsa_driver_version[]; +void register_switch_driver(struct dsa_switch_driver *type); +void unregister_switch_driver(struct dsa_switch_driver *type); + +/* slave.c */ +void dsa_slave_mii_bus_init(struct dsa_switch *ds); +struct net_device *dsa_slave_create(struct dsa_switch *ds, + struct device *parent, + int port, char *name); + +/* tag_edsa.c */ +int edsa_xmit(struct sk_buff *skb, struct net_device *dev); + + +#endif diff --git a/net/dsa/mv88e6123_61_65.c b/net/dsa/mv88e6123_61_65.c new file mode 100644 index 000000000000..147818cc706e --- /dev/null +++ b/net/dsa/mv88e6123_61_65.c @@ -0,0 +1,417 @@ +/* + * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support + * Copyright (c) 2008 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/list.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include "dsa_priv.h" +#include "mv88e6xxx.h" + +static char *mv88e6123_61_65_probe(struct mii_bus *bus, int sw_addr) +{ + int ret; + + ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03); + if (ret >= 0) { + ret &= 0xfff0; + if (ret == 0x1210) + return "Marvell 88E6123"; + if (ret == 0x1610) + return "Marvell 88E6161"; + if (ret == 0x1650) + return "Marvell 88E6165"; + } + + return NULL; +} + +static int mv88e6123_61_65_switch_reset(struct dsa_switch *ds) +{ + int i; + int ret; + + /* + * Set all ports to the disabled state. + */ + for (i = 0; i < 8; i++) { + ret = REG_READ(REG_PORT(i), 0x04); + REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc); + } + + /* + * Wait for transmit queues to drain. + */ + msleep(2); + + /* + * Reset the switch. + */ + REG_WRITE(REG_GLOBAL, 0x04, 0xc400); + + /* + * Wait up to one second for reset to complete. + */ + for (i = 0; i < 1000; i++) { + ret = REG_READ(REG_GLOBAL, 0x00); + if ((ret & 0xc800) == 0xc800) + break; + + msleep(1); + } + if (i == 1000) + return -ETIMEDOUT; + + return 0; +} + +static int mv88e6123_61_65_setup_global(struct dsa_switch *ds) +{ + int ret; + int i; + + /* + * Disable the PHY polling unit (since there won't be any + * external PHYs to poll), don't discard packets with + * excessive collisions, and mask all interrupt sources. + */ + REG_WRITE(REG_GLOBAL, 0x04, 0x0000); + + /* + * Set the default address aging time to 5 minutes, and + * enable address learn messages to be sent to all message + * ports. + */ + REG_WRITE(REG_GLOBAL, 0x0a, 0x0148); + + /* + * Configure the priority mapping registers. + */ + ret = mv88e6xxx_config_prio(ds); + if (ret < 0) + return ret; + + /* + * Configure the cpu port, and configure the cpu port as the + * port to which ingress and egress monitor frames are to be + * sent. + */ + REG_WRITE(REG_GLOBAL, 0x1a, (ds->cpu_port * 0x1110)); + + /* + * Disable remote management for now, and set the switch's + * DSA device number to zero. + */ + REG_WRITE(REG_GLOBAL, 0x1c, 0x0000); + + /* + * Send all frames with destination addresses matching + * 01:80:c2:00:00:2x to the CPU port. + */ + REG_WRITE(REG_GLOBAL2, 0x02, 0xffff); + + /* + * Send all frames with destination addresses matching + * 01:80:c2:00:00:0x to the CPU port. + */ + REG_WRITE(REG_GLOBAL2, 0x03, 0xffff); + + /* + * Disable the loopback filter, disable flow control + * messages, disable flood broadcast override, disable + * removing of provider tags, disable ATU age violation + * interrupts, disable tag flow control, force flow + * control priority to the highest, and send all special + * multicast frames to the CPU at the highest priority. + */ + REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff); + + /* + * Map all DSA device IDs to the CPU port. + */ + for (i = 0; i < 32; i++) + REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | ds->cpu_port); + + /* + * Clear all trunk masks. + */ + for (i = 0; i < 8; i++) + REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0xff); + + /* + * Clear all trunk mappings. + */ + for (i = 0; i < 16; i++) + REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11)); + + /* + * Disable ingress rate limiting by resetting all ingress + * rate limit registers to their initial state. + */ + for (i = 0; i < 6; i++) + REG_WRITE(REG_GLOBAL2, 0x09, 0x9000 | (i << 8)); + + /* + * Initialise cross-chip port VLAN table to reset defaults. + */ + REG_WRITE(REG_GLOBAL2, 0x0b, 0x9000); + + /* + * Clear the priority override table. + */ + for (i = 0; i < 16; i++) + REG_WRITE(REG_GLOBAL2, 0x0f, 0x8000 | (i << 8)); + + /* @@@ initialise AVB (22/23) watchdog (27) sdet (29) registers */ + + return 0; +} + +static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p) +{ + int addr = REG_PORT(p); + + /* + * MAC Forcing register: don't force link, speed, duplex + * or flow control state to any particular values. + */ + REG_WRITE(addr, 0x01, 0x0003); + + /* + * Do not limit the period of time that this port can be + * paused for by the remote end or the period of time that + * this port can pause the remote end. + */ + REG_WRITE(addr, 0x02, 0x0000); + + /* + * Port Control: disable Drop-on-Unlock, disable Drop-on-Lock, + * configure the EDSA tagging mode if this is the CPU port, + * disable Header mode, enable IGMP/MLD snooping, disable VLAN + * tunneling, determine priority by looking at 802.1p and IP + * priority fields (IP prio has precedence), and set STP state + * to Forwarding. Finally, if this is the CPU port, additionally + * enable forwarding of unknown unicast and multicast addresses. + */ + REG_WRITE(addr, 0x04, + (p == ds->cpu_port) ? 0x373f : 0x0433); + + /* + * Port Control 1: disable trunking. Also, if this is the + * CPU port, enable learn messages to be sent to this port. + */ + REG_WRITE(addr, 0x05, (p == ds->cpu_port) ? 0x8000 : 0x0000); + + /* + * Port based VLAN map: give each port its own address + * database, allow the CPU port to talk to each of the 'real' + * ports, and allow each of the 'real' ports to only talk to + * the CPU port. + */ + REG_WRITE(addr, 0x06, + ((p & 0xf) << 12) | + ((p == ds->cpu_port) ? + ds->valid_port_mask : + (1 << ds->cpu_port))); + + /* + * Default VLAN ID and priority: don't set a default VLAN + * ID, and set the default packet priority to zero. + */ + REG_WRITE(addr, 0x07, 0x0000); + + /* + * Port Control 2: don't force a good FCS, set the maximum + * frame size to 10240 bytes, don't let the switch add or + * strip 802.1q tags, don't discard tagged or untagged frames + * on this port, do a destination address lookup on all + * received packets as usual, disable ARP mirroring and don't + * send a copy of all transmitted/received frames on this port + * to the CPU. + */ + REG_WRITE(addr, 0x08, 0x2080); + + /* + * Egress rate control: disable egress rate control. + */ + REG_WRITE(addr, 0x09, 0x0001); + + /* + * Egress rate control 2: disable egress rate control. + */ + REG_WRITE(addr, 0x0a, 0x0000); + + /* + * Port Association Vector: when learning source addresses + * of packets, add the address to the address database using + * a port bitmap that has only the bit for this port set and + * the other bits clear. + */ + REG_WRITE(addr, 0x0b, 1 << p); + + /* + * Port ATU control: disable limiting the number of address + * database entries that this port is allowed to use. + */ + REG_WRITE(addr, 0x0c, 0x0000); + + /* + * Priorit Override: disable DA, SA and VTU priority override. + */ + REG_WRITE(addr, 0x0d, 0x0000); + + /* + * Port Ethertype: use the Ethertype DSA Ethertype value. + */ + REG_WRITE(addr, 0x0f, ETH_P_EDSA); + + /* + * Tag Remap: use an identity 802.1p prio -> switch prio + * mapping. + */ + REG_WRITE(addr, 0x18, 0x3210); + + /* + * Tag Remap 2: use an identity 802.1p prio -> switch prio + * mapping. + */ + REG_WRITE(addr, 0x19, 0x7654); + + return 0; +} + +static int mv88e6123_61_65_setup(struct dsa_switch *ds) +{ + struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); + int i; + int ret; + + mutex_init(&ps->smi_mutex); + mutex_init(&ps->stats_mutex); + + ret = mv88e6123_61_65_switch_reset(ds); + if (ret < 0) + return ret; + + /* @@@ initialise vtu and atu */ + + ret = mv88e6123_61_65_setup_global(ds); + if (ret < 0) + return ret; + + for (i = 0; i < 6; i++) { + ret = mv88e6123_61_65_setup_port(ds, i); + if (ret < 0) + return ret; + } + + return 0; +} + +static int mv88e6123_61_65_port_to_phy_addr(int port) +{ + if (port >= 0 && port <= 4) + return port; + return -1; +} + +static int +mv88e6123_61_65_phy_read(struct dsa_switch *ds, int port, int regnum) +{ + int addr = mv88e6123_61_65_port_to_phy_addr(port); + return mv88e6xxx_phy_read(ds, addr, regnum); +} + +static int +mv88e6123_61_65_phy_write(struct dsa_switch *ds, + int port, int regnum, u16 val) +{ + int addr = mv88e6123_61_65_port_to_phy_addr(port); + return mv88e6xxx_phy_write(ds, addr, regnum, val); +} + +static struct mv88e6xxx_hw_stat mv88e6123_61_65_hw_stats[] = { + { "in_good_octets", 8, 0x00, }, + { "in_bad_octets", 4, 0x02, }, + { "in_unicast", 4, 0x04, }, + { "in_broadcasts", 4, 0x06, }, + { "in_multicasts", 4, 0x07, }, + { "in_pause", 4, 0x16, }, + { "in_undersize", 4, 0x18, }, + { "in_fragments", 4, 0x19, }, + { "in_oversize", 4, 0x1a, }, + { "in_jabber", 4, 0x1b, }, + { "in_rx_error", 4, 0x1c, }, + { "in_fcs_error", 4, 0x1d, }, + { "out_octets", 8, 0x0e, }, + { "out_unicast", 4, 0x10, }, + { "out_broadcasts", 4, 0x13, }, + { "out_multicasts", 4, 0x12, }, + { "out_pause", 4, 0x15, }, + { "excessive", 4, 0x11, }, + { "collisions", 4, 0x1e, }, + { "deferred", 4, 0x05, }, + { "single", 4, 0x14, }, + { "multiple", 4, 0x17, }, + { "out_fcs_error", 4, 0x03, }, + { "late", 4, 0x1f, }, + { "hist_64bytes", 4, 0x08, }, + { "hist_65_127bytes", 4, 0x09, }, + { "hist_128_255bytes", 4, 0x0a, }, + { "hist_256_511bytes", 4, 0x0b, }, + { "hist_512_1023bytes", 4, 0x0c, }, + { "hist_1024_max_bytes", 4, 0x0d, }, +}; + +static void +mv88e6123_61_65_get_strings(struct dsa_switch *ds, int port, uint8_t *data) +{ + mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats), + mv88e6123_61_65_hw_stats, port, data); +} + +static void +mv88e6123_61_65_get_ethtool_stats(struct dsa_switch *ds, + int port, uint64_t *data) +{ + mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6123_61_65_hw_stats), + mv88e6123_61_65_hw_stats, port, data); +} + +static int mv88e6123_61_65_get_sset_count(struct dsa_switch *ds) +{ + return ARRAY_SIZE(mv88e6123_61_65_hw_stats); +} + +static struct dsa_switch_driver mv88e6123_61_65_switch_driver = { + .tag_protocol = __constant_htons(ETH_P_EDSA), + .priv_size = sizeof(struct mv88e6xxx_priv_state), + .probe = mv88e6123_61_65_probe, + .setup = mv88e6123_61_65_setup, + .set_addr = mv88e6xxx_set_addr_indirect, + .phy_read = mv88e6123_61_65_phy_read, + .phy_write = mv88e6123_61_65_phy_write, + .poll_link = mv88e6xxx_poll_link, + .get_strings = mv88e6123_61_65_get_strings, + .get_ethtool_stats = mv88e6123_61_65_get_ethtool_stats, + .get_sset_count = mv88e6123_61_65_get_sset_count, +}; + +int __init mv88e6123_61_65_init(void) +{ + register_switch_driver(&mv88e6123_61_65_switch_driver); + return 0; +} +module_init(mv88e6123_61_65_init); + +void __exit mv88e6123_61_65_cleanup(void) +{ + unregister_switch_driver(&mv88e6123_61_65_switch_driver); +} +module_exit(mv88e6123_61_65_cleanup); diff --git a/net/dsa/mv88e6xxx.c b/net/dsa/mv88e6xxx.c new file mode 100644 index 000000000000..13d2328a2406 --- /dev/null +++ b/net/dsa/mv88e6xxx.c @@ -0,0 +1,377 @@ +/* + * net/dsa/mv88e6xxx.c - Marvell 88e6xxx switch chip support + * Copyright (c) 2008 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/list.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include "dsa_priv.h" +#include "mv88e6xxx.h" + +/* + * If the switch's ADDR[4:0] strap pins are strapped to zero, it will + * use all 32 SMI bus addresses on its SMI bus, and all switch registers + * will be directly accessible on some {device address,register address} + * pair. If the ADDR[4:0] pins are not strapped to zero, the switch + * will only respond to SMI transactions to that specific address, and + * an indirect addressing mechanism needs to be used to access its + * registers. + */ +static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr) +{ + int ret; + int i; + + for (i = 0; i < 16; i++) { + ret = mdiobus_read(bus, sw_addr, 0); + if (ret < 0) + return ret; + + if ((ret & 0x8000) == 0) + return 0; + } + + return -ETIMEDOUT; +} + +int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg) +{ + int ret; + + if (sw_addr == 0) + return mdiobus_read(bus, addr, reg); + + /* + * Wait for the bus to become free. + */ + ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); + if (ret < 0) + return ret; + + /* + * Transmit the read command. + */ + ret = mdiobus_write(bus, sw_addr, 0, 0x9800 | (addr << 5) | reg); + if (ret < 0) + return ret; + + /* + * Wait for the read command to complete. + */ + ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); + if (ret < 0) + return ret; + + /* + * Read the data. + */ + ret = mdiobus_read(bus, sw_addr, 1); + if (ret < 0) + return ret; + + return ret & 0xffff; +} + +int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg) +{ + struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); + int ret; + + mutex_lock(&ps->smi_mutex); + ret = __mv88e6xxx_reg_read(ds->master_mii_bus, + ds->pd->sw_addr, addr, reg); + mutex_unlock(&ps->smi_mutex); + + return ret; +} + +int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr, + int reg, u16 val) +{ + int ret; + + if (sw_addr == 0) + return mdiobus_write(bus, addr, reg, val); + + /* + * Wait for the bus to become free. + */ + ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); + if (ret < 0) + return ret; + + /* + * Transmit the data to write. + */ + ret = mdiobus_write(bus, sw_addr, 1, val); + if (ret < 0) + return ret; + + /* + * Transmit the write command. + */ + ret = mdiobus_write(bus, sw_addr, 0, 0x9400 | (addr << 5) | reg); + if (ret < 0) + return ret; + + /* + * Wait for the write command to complete. + */ + ret = mv88e6xxx_reg_wait_ready(bus, sw_addr); + if (ret < 0) + return ret; + + return 0; +} + +int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val) +{ + struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); + int ret; + + mutex_lock(&ps->smi_mutex); + ret = __mv88e6xxx_reg_write(ds->master_mii_bus, + ds->pd->sw_addr, addr, reg, val); + mutex_unlock(&ps->smi_mutex); + + return ret; +} + +int mv88e6xxx_config_prio(struct dsa_switch *ds) +{ + /* + * Configure the IP ToS mapping registers. + */ + REG_WRITE(REG_GLOBAL, 0x10, 0x0000); + REG_WRITE(REG_GLOBAL, 0x11, 0x0000); + REG_WRITE(REG_GLOBAL, 0x12, 0x5555); + REG_WRITE(REG_GLOBAL, 0x13, 0x5555); + REG_WRITE(REG_GLOBAL, 0x14, 0xaaaa); + REG_WRITE(REG_GLOBAL, 0x15, 0xaaaa); + REG_WRITE(REG_GLOBAL, 0x16, 0xffff); + REG_WRITE(REG_GLOBAL, 0x17, 0xffff); + + /* + * Configure the IEEE 802.1p priority mapping register. + */ + REG_WRITE(REG_GLOBAL, 0x18, 0xfa41); + + return 0; +} + +int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr) +{ + int i; + int ret; + + for (i = 0; i < 6; i++) { + int j; + + /* + * Write the MAC address byte. + */ + REG_WRITE(REG_GLOBAL2, 0x0d, 0x8000 | (i << 8) | addr[i]); + + /* + * Wait for the write to complete. + */ + for (j = 0; j < 16; j++) { + ret = REG_READ(REG_GLOBAL2, 0x0d); + if ((ret & 0x8000) == 0) + break; + } + if (j == 16) + return -ETIMEDOUT; + } + + return 0; +} + +int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum) +{ + if (addr >= 0) + return mv88e6xxx_reg_read(ds, addr, regnum); + return 0xffff; +} + +int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val) +{ + if (addr >= 0) + return mv88e6xxx_reg_write(ds, addr, regnum, val); + return 0; +} + +void mv88e6xxx_poll_link(struct dsa_switch *ds) +{ + int i; + + for (i = 0; i < DSA_MAX_PORTS; i++) { + struct net_device *dev; + int port_status; + int link; + int speed; + int duplex; + int fc; + + dev = ds->ports[i]; + if (dev == NULL) + continue; + + link = 0; + if (dev->flags & IFF_UP) { + port_status = mv88e6xxx_reg_read(ds, REG_PORT(i), 0x00); + if (port_status < 0) + continue; + + link = !!(port_status & 0x0800); + } + + if (!link) { + if (netif_carrier_ok(dev)) { + printk(KERN_INFO "%s: link down\n", dev->name); + netif_carrier_off(dev); + } + continue; + } + + switch (port_status & 0x0300) { + case 0x0000: + speed = 10; + break; + case 0x0100: + speed = 100; + break; + case 0x0200: + speed = 1000; + break; + default: + speed = -1; + break; + } + duplex = (port_status & 0x0400) ? 1 : 0; + fc = (port_status & 0x8000) ? 1 : 0; + + if (!netif_carrier_ok(dev)) { + printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " + "flow control %sabled\n", dev->name, + speed, duplex ? "full" : "half", + fc ? "en" : "dis"); + netif_carrier_on(dev); + } + } +} + +static int mv88e6xxx_stats_wait(struct dsa_switch *ds) +{ + int ret; + int i; + + for (i = 0; i < 10; i++) { + ret = REG_READ(REG_GLOBAL2, 0x1d); + if ((ret & 0x8000) == 0) + return 0; + } + + return -ETIMEDOUT; +} + +static int mv88e6xxx_stats_snapshot(struct dsa_switch *ds, int port) +{ + int ret; + + /* + * Snapshot the hardware statistics counters for this port. + */ + REG_WRITE(REG_GLOBAL, 0x1d, 0xdc00 | port); + + /* + * Wait for the snapshotting to complete. + */ + ret = mv88e6xxx_stats_wait(ds); + if (ret < 0) + return ret; + + return 0; +} + +static void mv88e6xxx_stats_read(struct dsa_switch *ds, int stat, u32 *val) +{ + u32 _val; + int ret; + + *val = 0; + + ret = mv88e6xxx_reg_write(ds, REG_GLOBAL, 0x1d, 0xcc00 | stat); + if (ret < 0) + return; + + ret = mv88e6xxx_stats_wait(ds); + if (ret < 0) + return; + + ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1e); + if (ret < 0) + return; + + _val = ret << 16; + + ret = mv88e6xxx_reg_read(ds, REG_GLOBAL, 0x1f); + if (ret < 0) + return; + + *val = _val | ret; +} + +void mv88e6xxx_get_strings(struct dsa_switch *ds, + int nr_stats, struct mv88e6xxx_hw_stat *stats, + int port, uint8_t *data) +{ + int i; + + for (i = 0; i < nr_stats; i++) { + memcpy(data + i * ETH_GSTRING_LEN, + stats[i].string, ETH_GSTRING_LEN); + } +} + +void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, + int nr_stats, struct mv88e6xxx_hw_stat *stats, + int port, uint64_t *data) +{ + struct mv88e6xxx_priv_state *ps = (void *)(ds + 1); + int ret; + int i; + + mutex_lock(&ps->stats_mutex); + + ret = mv88e6xxx_stats_snapshot(ds, port); + if (ret < 0) { + mutex_unlock(&ps->stats_mutex); + return; + } + + /* + * Read each of the counters. + */ + for (i = 0; i < nr_stats; i++) { + struct mv88e6xxx_hw_stat *s = stats + i; + u32 low; + u32 high; + + mv88e6xxx_stats_read(ds, s->reg, &low); + if (s->sizeof_stat == 8) + mv88e6xxx_stats_read(ds, s->reg + 1, &high); + else + high = 0; + + data[i] = (((u64)high) << 32) | low; + } + + mutex_unlock(&ps->stats_mutex); +} diff --git a/net/dsa/mv88e6xxx.h b/net/dsa/mv88e6xxx.h new file mode 100644 index 000000000000..a004d4d02081 --- /dev/null +++ b/net/dsa/mv88e6xxx.h @@ -0,0 +1,77 @@ +/* + * net/dsa/mv88e6xxx.h - Marvell 88e6xxx switch chip support + * Copyright (c) 2008 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __MV88E6XXX_H +#define __MV88E6XXX_H + +#define REG_PORT(p) (0x10 + (p)) +#define REG_GLOBAL 0x1b +#define REG_GLOBAL2 0x1c + +struct mv88e6xxx_priv_state { + /* + * When using multi-chip addressing, this mutex protects + * access to the indirect access registers. (In single-chip + * mode, this mutex is effectively useless.) + */ + struct mutex smi_mutex; + + /* + * This mutex serialises access to the statistics unit. + * Hold this mutex over snapshot + dump sequences. + */ + struct mutex stats_mutex; +}; + +struct mv88e6xxx_hw_stat { + char string[ETH_GSTRING_LEN]; + int sizeof_stat; + int reg; +}; + +int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg); +int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg); +int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr, + int reg, u16 val); +int mv88e6xxx_reg_write(struct dsa_switch *ds, int addr, int reg, u16 val); +int mv88e6xxx_config_prio(struct dsa_switch *ds); +int mv88e6xxx_set_addr_indirect(struct dsa_switch *ds, u8 *addr); +int mv88e6xxx_phy_read(struct dsa_switch *ds, int addr, int regnum); +int mv88e6xxx_phy_write(struct dsa_switch *ds, int addr, int regnum, u16 val); +void mv88e6xxx_poll_link(struct dsa_switch *ds); +void mv88e6xxx_get_strings(struct dsa_switch *ds, + int nr_stats, struct mv88e6xxx_hw_stat *stats, + int port, uint8_t *data); +void mv88e6xxx_get_ethtool_stats(struct dsa_switch *ds, + int nr_stats, struct mv88e6xxx_hw_stat *stats, + int port, uint64_t *data); + +#define REG_READ(addr, reg) \ + ({ \ + int __ret; \ + \ + __ret = mv88e6xxx_reg_read(ds, addr, reg); \ + if (__ret < 0) \ + return __ret; \ + __ret; \ + }) + +#define REG_WRITE(addr, reg, val) \ + ({ \ + int __ret; \ + \ + __ret = mv88e6xxx_reg_write(ds, addr, reg, val); \ + if (__ret < 0) \ + return __ret; \ + }) + + + +#endif diff --git a/net/dsa/slave.c b/net/dsa/slave.c new file mode 100644 index 000000000000..3cb331e98b89 --- /dev/null +++ b/net/dsa/slave.c @@ -0,0 +1,288 @@ +/* + * net/dsa/slave.c - Slave device handling + * Copyright (c) 2008 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/list.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include "dsa_priv.h" + +/* slave mii_bus handling ***************************************************/ +static int dsa_slave_phy_read(struct mii_bus *bus, int addr, int reg) +{ + struct dsa_switch *ds = bus->priv; + + if (ds->valid_port_mask & (1 << addr)) + return ds->drv->phy_read(ds, addr, reg); + + return 0xffff; +} + +static int dsa_slave_phy_write(struct mii_bus *bus, int addr, int reg, u16 val) +{ + struct dsa_switch *ds = bus->priv; + + if (ds->valid_port_mask & (1 << addr)) + return ds->drv->phy_write(ds, addr, reg, val); + + return 0; +} + +void dsa_slave_mii_bus_init(struct dsa_switch *ds) +{ + ds->slave_mii_bus->priv = (void *)ds; + ds->slave_mii_bus->name = "dsa slave smi"; + ds->slave_mii_bus->read = dsa_slave_phy_read; + ds->slave_mii_bus->write = dsa_slave_phy_write; + snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s:%.2x", + ds->master_mii_bus->id, ds->pd->sw_addr); + ds->slave_mii_bus->parent = &(ds->master_mii_bus->dev); +} + + +/* slave device handling ****************************************************/ +static int dsa_slave_open(struct net_device *dev) +{ + return 0; +} + +static int dsa_slave_close(struct net_device *dev) +{ + return 0; +} + +static void dsa_slave_change_rx_flags(struct net_device *dev, int change) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct net_device *master = p->parent->master_netdev; + + if (change & IFF_ALLMULTI) + dev_set_allmulti(master, dev->flags & IFF_ALLMULTI ? 1 : -1); + if (change & IFF_PROMISC) + dev_set_promiscuity(master, dev->flags & IFF_PROMISC ? 1 : -1); +} + +static void dsa_slave_set_rx_mode(struct net_device *dev) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct net_device *master = p->parent->master_netdev; + + dev_mc_sync(master, dev); + dev_unicast_sync(master, dev); +} + +static int dsa_slave_set_mac_address(struct net_device *dev, void *addr) +{ + memcpy(dev->dev_addr, addr + 2, 6); + + return 0; +} + +static int dsa_slave_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct mii_ioctl_data *mii_data = if_mii(ifr); + + if (p->phy != NULL) + return phy_mii_ioctl(p->phy, mii_data, cmd); + + return -EOPNOTSUPP; +} + + +/* ethtool operations *******************************************************/ +static int +dsa_slave_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + int err; + + err = -EOPNOTSUPP; + if (p->phy != NULL) { + err = phy_read_status(p->phy); + if (err == 0) + err = phy_ethtool_gset(p->phy, cmd); + } + + return err; +} + +static int +dsa_slave_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + + if (p->phy != NULL) + return phy_ethtool_sset(p->phy, cmd); + + return -EOPNOTSUPP; +} + +static void dsa_slave_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *drvinfo) +{ + strncpy(drvinfo->driver, "dsa", 32); + strncpy(drvinfo->version, dsa_driver_version, 32); + strncpy(drvinfo->fw_version, "N/A", 32); + strncpy(drvinfo->bus_info, "platform", 32); +} + +static int dsa_slave_nway_reset(struct net_device *dev) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + + if (p->phy != NULL) + return genphy_restart_aneg(p->phy); + + return -EOPNOTSUPP; +} + +static u32 dsa_slave_get_link(struct net_device *dev) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + + if (p->phy != NULL) { + genphy_update_link(p->phy); + return p->phy->link; + } + + return -EOPNOTSUPP; +} + +static void dsa_slave_get_strings(struct net_device *dev, + uint32_t stringset, uint8_t *data) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct dsa_switch *ds = p->parent; + + if (stringset == ETH_SS_STATS) { + int len = ETH_GSTRING_LEN; + + strncpy(data, "tx_packets", len); + strncpy(data + len, "tx_bytes", len); + strncpy(data + 2 * len, "rx_packets", len); + strncpy(data + 3 * len, "rx_bytes", len); + if (ds->drv->get_strings != NULL) + ds->drv->get_strings(ds, p->port, data + 4 * len); + } +} + +static void dsa_slave_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, + uint64_t *data) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct dsa_switch *ds = p->parent; + + data[0] = p->dev->stats.tx_packets; + data[1] = p->dev->stats.tx_bytes; + data[2] = p->dev->stats.rx_packets; + data[3] = p->dev->stats.rx_bytes; + if (ds->drv->get_ethtool_stats != NULL) + ds->drv->get_ethtool_stats(ds, p->port, data + 4); +} + +static int dsa_slave_get_sset_count(struct net_device *dev, int sset) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + struct dsa_switch *ds = p->parent; + + if (sset == ETH_SS_STATS) { + int count; + + count = 4; + if (ds->drv->get_sset_count != NULL) + count += ds->drv->get_sset_count(ds); + + return count; + } + + return -EOPNOTSUPP; +} + +static const struct ethtool_ops dsa_slave_ethtool_ops = { + .get_settings = dsa_slave_get_settings, + .set_settings = dsa_slave_set_settings, + .get_drvinfo = dsa_slave_get_drvinfo, + .nway_reset = dsa_slave_nway_reset, + .get_link = dsa_slave_get_link, + .set_sg = ethtool_op_set_sg, + .get_strings = dsa_slave_get_strings, + .get_ethtool_stats = dsa_slave_get_ethtool_stats, + .get_sset_count = dsa_slave_get_sset_count, +}; + + +/* slave device setup *******************************************************/ +struct net_device * +dsa_slave_create(struct dsa_switch *ds, struct device *parent, + int port, char *name) +{ + struct net_device *master = ds->master_netdev; + struct net_device *slave_dev; + struct dsa_slave_priv *p; + int ret; + + slave_dev = alloc_netdev(sizeof(struct dsa_slave_priv), + name, ether_setup); + if (slave_dev == NULL) + return slave_dev; + + slave_dev->features = master->vlan_features; + SET_ETHTOOL_OPS(slave_dev, &dsa_slave_ethtool_ops); + memcpy(slave_dev->dev_addr, master->dev_addr, ETH_ALEN); + slave_dev->tx_queue_len = 0; + switch (ds->tag_protocol) { +#ifdef CONFIG_NET_DSA_TAG_EDSA + case htons(ETH_P_EDSA): + slave_dev->hard_start_xmit = edsa_xmit; + break; +#endif + default: + BUG(); + } + slave_dev->open = dsa_slave_open; + slave_dev->stop = dsa_slave_close; + slave_dev->change_rx_flags = dsa_slave_change_rx_flags; + slave_dev->set_rx_mode = dsa_slave_set_rx_mode; + slave_dev->set_multicast_list = dsa_slave_set_rx_mode; + slave_dev->set_mac_address = dsa_slave_set_mac_address; + slave_dev->do_ioctl = dsa_slave_ioctl; + SET_NETDEV_DEV(slave_dev, parent); + slave_dev->vlan_features = master->vlan_features; + + p = netdev_priv(slave_dev); + p->dev = slave_dev; + p->parent = ds; + p->port = port; + p->phy = ds->slave_mii_bus->phy_map[port]; + + ret = register_netdev(slave_dev); + if (ret) { + printk(KERN_ERR "%s: error %d registering interface %s\n", + master->name, ret, slave_dev->name); + free_netdev(slave_dev); + return NULL; + } + + netif_carrier_off(slave_dev); + + if (p->phy != NULL) { + phy_attach(slave_dev, p->phy->dev.bus_id, + 0, PHY_INTERFACE_MODE_GMII); + + p->phy->autoneg = AUTONEG_ENABLE; + p->phy->speed = 0; + p->phy->duplex = 0; + p->phy->advertising = p->phy->supported | ADVERTISED_Autoneg; + phy_start_aneg(p->phy); + } + + return slave_dev; +} diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c new file mode 100644 index 000000000000..f985ea993843 --- /dev/null +++ b/net/dsa/tag_edsa.c @@ -0,0 +1,213 @@ +/* + * net/dsa/tag_edsa.c - Ethertype DSA tagging + * Copyright (c) 2008 Marvell Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/etherdevice.h> +#include <linux/list.h> +#include <linux/netdevice.h> +#include "dsa_priv.h" + +#define DSA_HLEN 4 +#define EDSA_HLEN 8 + +int edsa_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct dsa_slave_priv *p = netdev_priv(dev); + u8 *edsa_header; + + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + + /* + * Convert the outermost 802.1q tag to a DSA tag and prepend + * a DSA ethertype field is the packet is tagged, or insert + * a DSA ethertype plus DSA tag between the addresses and the + * current ethertype field if the packet is untagged. + */ + if (skb->protocol == htons(ETH_P_8021Q)) { + if (skb_cow_head(skb, DSA_HLEN) < 0) + goto out_free; + skb_push(skb, DSA_HLEN); + + memmove(skb->data, skb->data + DSA_HLEN, 2 * ETH_ALEN); + + /* + * Construct tagged FROM_CPU DSA tag from 802.1q tag. + */ + edsa_header = skb->data + 2 * ETH_ALEN; + edsa_header[0] = (ETH_P_EDSA >> 8) & 0xff; + edsa_header[1] = ETH_P_EDSA & 0xff; + edsa_header[2] = 0x00; + edsa_header[3] = 0x00; + edsa_header[4] = 0x60; + edsa_header[5] = p->port << 3; + + /* + * Move CFI field from byte 6 to byte 5. + */ + if (edsa_header[6] & 0x10) { + edsa_header[5] |= 0x01; + edsa_header[6] &= ~0x10; + } + } else { + if (skb_cow_head(skb, EDSA_HLEN) < 0) + goto out_free; + skb_push(skb, EDSA_HLEN); + + memmove(skb->data, skb->data + EDSA_HLEN, 2 * ETH_ALEN); + + /* + * Construct untagged FROM_CPU DSA tag. + */ + edsa_header = skb->data + 2 * ETH_ALEN; + edsa_header[0] = (ETH_P_EDSA >> 8) & 0xff; + edsa_header[1] = ETH_P_EDSA & 0xff; + edsa_header[2] = 0x00; + edsa_header[3] = 0x00; + edsa_header[4] = 0x40; + edsa_header[5] = p->port << 3; + edsa_header[6] = 0x00; + edsa_header[7] = 0x00; + } + + skb->protocol = htons(ETH_P_EDSA); + + skb->dev = p->parent->master_netdev; + dev_queue_xmit(skb); + + return NETDEV_TX_OK; + +out_free: + kfree_skb(skb); + return NETDEV_TX_OK; +} + +static int edsa_rcv(struct sk_buff *skb, struct net_device *dev, + struct packet_type *pt, struct net_device *orig_dev) +{ + struct dsa_switch *ds = dev->dsa_ptr; + u8 *edsa_header; + int source_port; + + if (unlikely(ds == NULL)) + goto out_drop; + + skb = skb_unshare(skb, GFP_ATOMIC); + if (skb == NULL) + goto out; + + if (unlikely(!pskb_may_pull(skb, EDSA_HLEN))) + goto out_drop; + + /* + * Skip the two null bytes after the ethertype. + */ + edsa_header = skb->data + 2; + + /* + * Check that frame type is either TO_CPU or FORWARD, and + * that the source device is zero. + */ + if ((edsa_header[0] & 0xdf) != 0x00 && (edsa_header[0] & 0xdf) != 0xc0) + goto out_drop; + + /* + * Check that the source port is a registered DSA port. + */ + source_port = (edsa_header[1] >> 3) & 0x1f; + if (source_port >= DSA_MAX_PORTS || ds->ports[source_port] == NULL) + goto out_drop; + + /* + * If the 'tagged' bit is set, convert the DSA tag to a 802.1q + * tag and delete the ethertype part. If the 'tagged' bit is + * clear, delete the ethertype and the DSA tag parts. + */ + if (edsa_header[0] & 0x20) { + u8 new_header[4]; + + /* + * Insert 802.1q ethertype and copy the VLAN-related + * fields, but clear the bit that will hold CFI (since + * DSA uses that bit location for another purpose). + */ + new_header[0] = (ETH_P_8021Q >> 8) & 0xff; + new_header[1] = ETH_P_8021Q & 0xff; + new_header[2] = edsa_header[2] & ~0x10; + new_header[3] = edsa_header[3]; + + /* + * Move CFI bit from its place in the DSA header to + * its 802.1q-designated place. + */ + if (edsa_header[1] & 0x01) + new_header[2] |= 0x10; + + skb_pull_rcsum(skb, DSA_HLEN); + + /* + * Update packet checksum if skb is CHECKSUM_COMPLETE. + */ + if (skb->ip_summed == CHECKSUM_COMPLETE) { + __wsum c = skb->csum; + c = csum_add(c, csum_partial(new_header + 2, 2, 0)); + c = csum_sub(c, csum_partial(edsa_header + 2, 2, 0)); + skb->csum = c; + } + + memcpy(edsa_header, new_header, DSA_HLEN); + + memmove(skb->data - ETH_HLEN, + skb->data - ETH_HLEN - DSA_HLEN, + 2 * ETH_ALEN); + } else { + /* + * Remove DSA tag and update checksum. + */ + skb_pull_rcsum(skb, EDSA_HLEN); + memmove(skb->data - ETH_HLEN, + skb->data - ETH_HLEN - EDSA_HLEN, + 2 * ETH_ALEN); + } + + skb->dev = ds->ports[source_port]; + skb_push(skb, ETH_HLEN); + skb->protocol = eth_type_trans(skb, skb->dev); + + skb->dev->last_rx = jiffies; + skb->dev->stats.rx_packets++; + skb->dev->stats.rx_bytes += skb->len; + + netif_receive_skb(skb); + + return 0; + +out_drop: + kfree_skb(skb); +out: + return 0; +} + +static struct packet_type edsa_packet_type = { + .type = __constant_htons(ETH_P_EDSA), + .func = edsa_rcv, +}; + +static int __init edsa_init_module(void) +{ + dev_add_pack(&edsa_packet_type); + return 0; +} +module_init(edsa_init_module); + +static void __exit edsa_cleanup_module(void) +{ + dev_remove_pack(&edsa_packet_type); +} +module_exit(edsa_cleanup_module); |