diff options
Diffstat (limited to 'net/mac80211/cfg.c')
-rw-r--r-- | net/mac80211/cfg.c | 198 |
1 files changed, 136 insertions, 62 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 453e974287d1..363d19b5d5c8 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -451,11 +451,11 @@ void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo) rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH; if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI) rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI; - if (sta->last_rx_rate_flag & RX_FLAG_80MHZ) + if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80MHZ) rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH; - if (sta->last_rx_rate_flag & RX_FLAG_80P80MHZ) + if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80P80MHZ) rinfo->flags |= RATE_INFO_FLAGS_80P80_MHZ_WIDTH; - if (sta->last_rx_rate_flag & RX_FLAG_160MHZ) + if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_160MHZ) rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH; } @@ -970,9 +970,9 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, /* TODO: make hostapd tell us what it wants */ sdata->smps_mode = IEEE80211_SMPS_OFF; sdata->needed_rx_chains = sdata->local->rx_chains; - sdata->radar_required = params->radar_required; mutex_lock(&local->mtx); + sdata->radar_required = params->radar_required; err = ieee80211_vif_use_channel(sdata, ¶ms->chandef, IEEE80211_CHANCTX_SHARED); mutex_unlock(&local->mtx); @@ -1056,6 +1056,7 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev, int err; sdata = IEEE80211_DEV_TO_SUB_IF(dev); + sdata_assert_lock(sdata); /* don't allow changing the beacon while CSA is in place - offset * of channel switch counter may change @@ -1083,6 +1084,8 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) struct probe_resp *old_probe_resp; struct cfg80211_chan_def chandef; + sdata_assert_lock(sdata); + old_beacon = sdata_dereference(sdata->u.ap.beacon, sdata); if (!old_beacon) return -ENOENT; @@ -1343,6 +1346,18 @@ static int sta_apply_parameters(struct ieee80211_local *local, ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, params->vht_capa, sta); + if (params->opmode_notif_used) { + enum ieee80211_band band = + ieee80211_get_sdata_band(sdata); + + /* returned value is only needed for rc update, but the + * rc isn't initialized here yet, so ignore it + */ + __ieee80211_vht_handle_opmode(sdata, sta, + params->opmode_notif, + band, false); + } + if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH u32 changed = 0; @@ -2630,6 +2645,18 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local, if (!roc) return -ENOMEM; + /* + * If the duration is zero, then the driver + * wouldn't actually do anything. Set it to + * 10 for now. + * + * TODO: cancel the off-channel operation + * when we get the SKB's TX status and + * the wait time was zero before. + */ + if (!duration) + duration = 10; + roc->chan = channel; roc->duration = duration; roc->req_duration = duration; @@ -2671,18 +2698,6 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local, /* otherwise actually kick it off here (for error handling) */ - /* - * If the duration is zero, then the driver - * wouldn't actually do anything. Set it to - * 10 for now. - * - * TODO: cancel the off-channel operation - * when we get the SKB's TX status and - * the wait time was zero before. - */ - if (!duration) - duration = 10; - ret = drv_remain_on_channel(local, sdata, channel, duration, type); if (ret) { kfree(roc); @@ -2990,69 +3005,88 @@ cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon) return new_beacon; } -void ieee80211_csa_finalize_work(struct work_struct *work) +void ieee80211_csa_finish(struct ieee80211_vif *vif) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + ieee80211_queue_work(&sdata->local->hw, + &sdata->csa_finalize_work); +} +EXPORT_SYMBOL(ieee80211_csa_finish); + +static void ieee80211_csa_finalize(struct ieee80211_sub_if_data *sdata) { - struct ieee80211_sub_if_data *sdata = - container_of(work, struct ieee80211_sub_if_data, - csa_finalize_work); struct ieee80211_local *local = sdata->local; int err, changed = 0; - sdata_lock(sdata); - /* AP might have been stopped while waiting for the lock. */ - if (!sdata->vif.csa_active) - goto unlock; - - if (!ieee80211_sdata_running(sdata)) - goto unlock; + sdata_assert_lock(sdata); - sdata->radar_required = sdata->csa_radar_required; mutex_lock(&local->mtx); + sdata->radar_required = sdata->csa_radar_required; err = ieee80211_vif_change_channel(sdata, &changed); mutex_unlock(&local->mtx); if (WARN_ON(err < 0)) - goto unlock; + return; if (!local->use_chanctx) { local->_oper_chandef = sdata->csa_chandef; ieee80211_hw_config(local, 0); } - ieee80211_bss_info_change_notify(sdata, changed); - sdata->vif.csa_active = false; switch (sdata->vif.type) { case NL80211_IFTYPE_AP: err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon); - if (err < 0) - goto unlock; - - changed |= err; kfree(sdata->u.ap.next_beacon); sdata->u.ap.next_beacon = NULL; - ieee80211_bss_info_change_notify(sdata, err); + if (err < 0) + return; + changed |= err; break; case NL80211_IFTYPE_ADHOC: - ieee80211_ibss_finish_csa(sdata); + err = ieee80211_ibss_finish_csa(sdata); + if (err < 0) + return; + changed |= err; break; #ifdef CONFIG_MAC80211_MESH case NL80211_IFTYPE_MESH_POINT: err = ieee80211_mesh_finish_csa(sdata); if (err < 0) - goto unlock; + return; + changed |= err; break; #endif default: WARN_ON(1); - goto unlock; + return; } + ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_wake_queues_by_reason(&sdata->local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_CSA); cfg80211_ch_switch_notify(sdata->dev, &sdata->csa_chandef); +} + +void ieee80211_csa_finalize_work(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, + csa_finalize_work); + + sdata_lock(sdata); + /* AP might have been stopped while waiting for the lock. */ + if (!sdata->vif.csa_active) + goto unlock; + + if (!ieee80211_sdata_running(sdata)) + goto unlock; + + ieee80211_csa_finalize(sdata); unlock: sdata_unlock(sdata); @@ -3066,9 +3100,9 @@ int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_chanctx *chanctx; struct ieee80211_if_mesh __maybe_unused *ifmsh; - int err, num_chanctx; + int err, num_chanctx, changed = 0; - lockdep_assert_held(&sdata->wdev.mtx); + sdata_assert_lock(sdata); if (!list_empty(&local->roc_list) || local->scanning) return -EBUSY; @@ -3107,19 +3141,40 @@ int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, switch (sdata->vif.type) { case NL80211_IFTYPE_AP: - sdata->csa_counter_offset_beacon = - params->counter_offset_beacon; - sdata->csa_counter_offset_presp = params->counter_offset_presp; sdata->u.ap.next_beacon = cfg80211_beacon_dup(¶ms->beacon_after); if (!sdata->u.ap.next_beacon) return -ENOMEM; + /* + * With a count of 0, we don't have to wait for any + * TBTT before switching, so complete the CSA + * immediately. In theory, with a count == 1 we + * should delay the switch until just before the next + * TBTT, but that would complicate things so we switch + * immediately too. If we would delay the switch + * until the next TBTT, we would have to set the probe + * response here. + * + * TODO: A channel switch with count <= 1 without + * sending a CSA action frame is kind of useless, + * because the clients won't know we're changing + * channels. The action frame must be implemented + * either here or in the userspace. + */ + if (params->count <= 1) + break; + + sdata->csa_counter_offset_beacon = + params->counter_offset_beacon; + sdata->csa_counter_offset_presp = params->counter_offset_presp; err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa); if (err < 0) { kfree(sdata->u.ap.next_beacon); return err; } + changed |= err; + break; case NL80211_IFTYPE_ADHOC: if (!sdata->vif.bss_conf.ibss_joined) @@ -3147,17 +3202,21 @@ int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, params->chandef.chan->band) return -EINVAL; - err = ieee80211_ibss_csa_beacon(sdata, params); - if (err < 0) - return err; + /* see comments in the NL80211_IFTYPE_AP block */ + if (params->count > 1) { + err = ieee80211_ibss_csa_beacon(sdata, params); + if (err < 0) + return err; + changed |= err; + } + + ieee80211_send_action_csa(sdata, params); + break; #ifdef CONFIG_MAC80211_MESH case NL80211_IFTYPE_MESH_POINT: ifmsh = &sdata->u.mesh; - if (!ifmsh->mesh_id) - return -EINVAL; - if (params->chandef.width != sdata->vif.bss_conf.chandef.width) return -EINVAL; @@ -3166,17 +3225,27 @@ int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, params->chandef.chan->band) return -EINVAL; - ifmsh->chsw_init = true; - if (!ifmsh->pre_value) - ifmsh->pre_value = 1; - else - ifmsh->pre_value++; + if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_NONE) { + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_INIT; + if (!ifmsh->pre_value) + ifmsh->pre_value = 1; + else + ifmsh->pre_value++; + } - err = ieee80211_mesh_csa_beacon(sdata, params, true); - if (err < 0) { - ifmsh->chsw_init = false; - return err; + /* see comments in the NL80211_IFTYPE_AP block */ + if (params->count > 1) { + err = ieee80211_mesh_csa_beacon(sdata, params); + if (err < 0) { + ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; + return err; + } + changed |= err; } + + if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) + ieee80211_send_action_csa(sdata, params); + break; #endif default: @@ -3193,8 +3262,13 @@ int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, sdata->csa_chandef = params->chandef; sdata->vif.csa_active = true; - ieee80211_bss_info_change_notify(sdata, err); - drv_channel_switch_beacon(sdata, ¶ms->chandef); + if (changed) { + ieee80211_bss_info_change_notify(sdata, changed); + drv_channel_switch_beacon(sdata, ¶ms->chandef); + } else { + /* if the beacon didn't change, we can finalize immediately */ + ieee80211_csa_finalize(sdata); + } return 0; } @@ -3865,7 +3939,7 @@ static int ieee80211_set_qos_map(struct wiphy *wiphy, return 0; } -struct cfg80211_ops mac80211_config_ops = { +const struct cfg80211_ops mac80211_config_ops = { .add_virtual_intf = ieee80211_add_iface, .del_virtual_intf = ieee80211_del_iface, .change_virtual_intf = ieee80211_change_iface, |