diff options
Diffstat (limited to 'rust')
32 files changed, 4952 insertions, 23 deletions
diff --git a/rust/.gitignore b/rust/.gitignore index 168cb26a31b9..21552992b401 100644 --- a/rust/.gitignore +++ b/rust/.gitignore @@ -2,6 +2,7 @@ bindings_generated.rs bindings_helpers_generated.rs +uapi_generated.rs exports_*_generated.h doc/ test/ diff --git a/rust/Makefile b/rust/Makefile index aef85e9e8eeb..7c9d9f11aec5 100644 --- a/rust/Makefile +++ b/rust/Makefile @@ -16,6 +16,9 @@ obj-$(CONFIG_RUST) += alloc.o bindings.o kernel.o always-$(CONFIG_RUST) += exports_alloc_generated.h exports_bindings_generated.h \ exports_kernel_generated.h +always-$(CONFIG_RUST) += uapi/uapi_generated.rs +obj-$(CONFIG_RUST) += uapi.o + ifdef CONFIG_RUST_BUILD_ASSERT_ALLOW obj-$(CONFIG_RUST) += build_error.o else @@ -113,7 +116,7 @@ rustdoc-alloc: $(src)/alloc/lib.rs rustdoc-core rustdoc-compiler_builtins FORCE rustdoc-kernel: private rustc_target_flags = --extern alloc \ --extern build_error --extern macros=$(objtree)/$(obj)/libmacros.so \ - --extern bindings + --extern bindings --extern uapi rustdoc-kernel: $(src)/kernel/lib.rs rustdoc-core rustdoc-macros \ rustdoc-compiler_builtins rustdoc-alloc $(obj)/libmacros.so \ $(obj)/bindings.o FORCE @@ -141,6 +144,9 @@ rusttestlib-macros: $(src)/macros/lib.rs rusttest-prepare FORCE rusttestlib-bindings: $(src)/bindings/lib.rs rusttest-prepare FORCE $(call if_changed,rustc_test_library) +rusttestlib-uapi: $(src)/uapi/lib.rs rusttest-prepare FORCE + $(call if_changed,rustc_test_library) + quiet_cmd_rustdoc_test = RUSTDOC T $< cmd_rustdoc_test = \ OBJTREE=$(abspath $(objtree)) \ @@ -223,9 +229,10 @@ rusttest-macros: $(src)/macros/lib.rs rusttest-prepare FORCE $(call if_changed,rustdoc_test) rusttest-kernel: private rustc_target_flags = --extern alloc \ - --extern build_error --extern macros --extern bindings + --extern build_error --extern macros --extern bindings --extern uapi rusttest-kernel: $(src)/kernel/lib.rs rusttest-prepare \ - rusttestlib-build_error rusttestlib-macros rusttestlib-bindings FORCE + rusttestlib-build_error rusttestlib-macros rusttestlib-bindings \ + rusttestlib-uapi FORCE $(call if_changed,rustc_test) $(call if_changed,rustc_test_library) @@ -302,6 +309,12 @@ $(obj)/bindings/bindings_generated.rs: $(src)/bindings/bindings_helper.h \ $(src)/bindgen_parameters FORCE $(call if_changed_dep,bindgen) +$(obj)/uapi/uapi_generated.rs: private bindgen_target_flags = \ + $(shell grep -v '^#\|^$$' $(srctree)/$(src)/bindgen_parameters) +$(obj)/uapi/uapi_generated.rs: $(src)/uapi/uapi_helper.h \ + $(src)/bindgen_parameters FORCE + $(call if_changed_dep,bindgen) + # See `CFLAGS_REMOVE_helpers.o` above. In addition, Clang on C does not warn # with `-Wmissing-declarations` (unlike GCC), so it is not strictly needed here # given it is `libclang`; but for consistency, future Clang changes and/or @@ -402,10 +415,15 @@ $(obj)/bindings.o: $(src)/bindings/lib.rs \ $(obj)/bindings/bindings_helpers_generated.rs FORCE $(call if_changed_dep,rustc_library) +$(obj)/uapi.o: $(src)/uapi/lib.rs \ + $(obj)/compiler_builtins.o \ + $(obj)/uapi/uapi_generated.rs FORCE + $(call if_changed_dep,rustc_library) + $(obj)/kernel.o: private rustc_target_flags = --extern alloc \ - --extern build_error --extern macros --extern bindings + --extern build_error --extern macros --extern bindings --extern uapi $(obj)/kernel.o: $(src)/kernel/lib.rs $(obj)/alloc.o $(obj)/build_error.o \ - $(obj)/libmacros.so $(obj)/bindings.o FORCE + $(obj)/libmacros.so $(obj)/bindings.o $(obj)/uapi.o FORCE $(call if_changed_dep,rustc_library) endif # CONFIG_RUST diff --git a/rust/alloc/vec/mod.rs b/rust/alloc/vec/mod.rs index f77c7368d534..fe4fff5064bc 100644 --- a/rust/alloc/vec/mod.rs +++ b/rust/alloc/vec/mod.rs @@ -122,10 +122,8 @@ use self::spec_from_elem::SpecFromElem; #[cfg(not(no_global_oom_handling))] mod spec_from_elem; -#[cfg(not(no_global_oom_handling))] use self::set_len_on_drop::SetLenOnDrop; -#[cfg(not(no_global_oom_handling))] mod set_len_on_drop; #[cfg(not(no_global_oom_handling))] @@ -149,7 +147,8 @@ mod spec_from_iter; #[cfg(not(no_global_oom_handling))] use self::spec_extend::SpecExtend; -#[cfg(not(no_global_oom_handling))] +use self::spec_extend::TrySpecExtend; + mod spec_extend; /// A contiguous growable array type, written as `Vec<T>`, short for 'vector'. @@ -1919,6 +1918,17 @@ impl<T, A: Allocator> Vec<T, A> { self.len += count; } + /// Tries to append elements to `self` from other buffer. + #[inline] + unsafe fn try_append_elements(&mut self, other: *const [T]) -> Result<(), TryReserveError> { + let count = unsafe { (*other).len() }; + self.try_reserve(count)?; + let len = self.len(); + unsafe { ptr::copy_nonoverlapping(other as *const T, self.as_mut_ptr().add(len), count) }; + self.len += count; + Ok(()) + } + /// Removes the specified range from the vector in bulk, returning all /// removed elements as an iterator. If the iterator is dropped before /// being fully consumed, it drops the remaining removed elements. @@ -2340,6 +2350,45 @@ impl<T: Clone, A: Allocator> Vec<T, A> { } } + /// Tries to resize the `Vec` in-place so that `len` is equal to `new_len`. + /// + /// If `new_len` is greater than `len`, the `Vec` is extended by the + /// difference, with each additional slot filled with `value`. + /// If `new_len` is less than `len`, the `Vec` is simply truncated. + /// + /// This method requires `T` to implement [`Clone`], + /// in order to be able to clone the passed value. + /// If you need more flexibility (or want to rely on [`Default`] instead of + /// [`Clone`]), use [`Vec::resize_with`]. + /// If you only need to resize to a smaller size, use [`Vec::truncate`]. + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec!["hello"]; + /// vec.try_resize(3, "world").unwrap(); + /// assert_eq!(vec, ["hello", "world", "world"]); + /// + /// let mut vec = vec![1, 2, 3, 4]; + /// vec.try_resize(2, 0).unwrap(); + /// assert_eq!(vec, [1, 2]); + /// + /// let mut vec = vec![42]; + /// let result = vec.try_resize(usize::MAX, 0); + /// assert!(result.is_err()); + /// ``` + #[stable(feature = "kernel", since = "1.0.0")] + pub fn try_resize(&mut self, new_len: usize, value: T) -> Result<(), TryReserveError> { + let len = self.len(); + + if new_len > len { + self.try_extend_with(new_len - len, ExtendElement(value)) + } else { + self.truncate(new_len); + Ok(()) + } + } + /// Clones and appends all elements in a slice to the `Vec`. /// /// Iterates over the slice `other`, clones each element, and then appends @@ -2365,6 +2414,30 @@ impl<T: Clone, A: Allocator> Vec<T, A> { self.spec_extend(other.iter()) } + /// Tries to clone and append all elements in a slice to the `Vec`. + /// + /// Iterates over the slice `other`, clones each element, and then appends + /// it to this `Vec`. The `other` slice is traversed in-order. + /// + /// Note that this function is same as [`extend`] except that it is + /// specialized to work with slices instead. If and when Rust gets + /// specialization this function will likely be deprecated (but still + /// available). + /// + /// # Examples + /// + /// ``` + /// let mut vec = vec![1]; + /// vec.try_extend_from_slice(&[2, 3, 4]).unwrap(); + /// assert_eq!(vec, [1, 2, 3, 4]); + /// ``` + /// + /// [`extend`]: Vec::extend + #[stable(feature = "kernel", since = "1.0.0")] + pub fn try_extend_from_slice(&mut self, other: &[T]) -> Result<(), TryReserveError> { + self.try_spec_extend(other.iter()) + } + /// Copies elements from `src` range to the end of the vector. /// /// # Panics @@ -2504,6 +2577,36 @@ impl<T, A: Allocator> Vec<T, A> { // len set by scope guard } } + + /// Try to extend the vector by `n` values, using the given generator. + fn try_extend_with<E: ExtendWith<T>>(&mut self, n: usize, mut value: E) -> Result<(), TryReserveError> { + self.try_reserve(n)?; + + unsafe { + let mut ptr = self.as_mut_ptr().add(self.len()); + // Use SetLenOnDrop to work around bug where compiler + // might not realize the store through `ptr` through self.set_len() + // don't alias. + let mut local_len = SetLenOnDrop::new(&mut self.len); + + // Write all elements except the last one + for _ in 1..n { + ptr::write(ptr, value.next()); + ptr = ptr.offset(1); + // Increment the length in every step in case next() panics + local_len.increment_len(1); + } + + if n > 0 { + // We can write the last element directly without cloning needlessly + ptr::write(ptr, value.last()); + local_len.increment_len(1); + } + + // len set by scope guard + Ok(()) + } + } } impl<T: PartialEq, A: Allocator> Vec<T, A> { @@ -2838,6 +2941,34 @@ impl<T, A: Allocator> Vec<T, A> { } } + // leaf method to which various SpecFrom/SpecExtend implementations delegate when + // they have no further optimizations to apply + fn try_extend_desugared<I: Iterator<Item = T>>(&mut self, mut iterator: I) -> Result<(), TryReserveError> { + // This is the case for a general iterator. + // + // This function should be the moral equivalent of: + // + // for item in iterator { + // self.push(item); + // } + while let Some(element) = iterator.next() { + let len = self.len(); + if len == self.capacity() { + let (lower, _) = iterator.size_hint(); + self.try_reserve(lower.saturating_add(1))?; + } + unsafe { + ptr::write(self.as_mut_ptr().add(len), element); + // Since next() executes user code which can panic we have to bump the length + // after each step. + // NB can't overflow since we would have had to alloc the address space + self.set_len(len + 1); + } + } + + Ok(()) + } + /// Creates a splicing iterator that replaces the specified range in the vector /// with the given `replace_with` iterator and yields the removed items. /// `replace_with` does not need to be the same length as `range`. diff --git a/rust/alloc/vec/set_len_on_drop.rs b/rust/alloc/vec/set_len_on_drop.rs new file mode 100644 index 000000000000..448bf5076a0b --- /dev/null +++ b/rust/alloc/vec/set_len_on_drop.rs @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +// Set the length of the vec when the `SetLenOnDrop` value goes out of scope. +// +// The idea is: The length field in SetLenOnDrop is a local variable +// that the optimizer will see does not alias with any stores through the Vec's data +// pointer. This is a workaround for alias analysis issue #32155 +pub(super) struct SetLenOnDrop<'a> { + len: &'a mut usize, + local_len: usize, +} + +impl<'a> SetLenOnDrop<'a> { + #[inline] + pub(super) fn new(len: &'a mut usize) -> Self { + SetLenOnDrop { local_len: *len, len } + } + + #[inline] + pub(super) fn increment_len(&mut self, increment: usize) { + self.local_len += increment; + } +} + +impl Drop for SetLenOnDrop<'_> { + #[inline] + fn drop(&mut self) { + *self.len = self.local_len; + } +} diff --git a/rust/alloc/vec/spec_extend.rs b/rust/alloc/vec/spec_extend.rs new file mode 100644 index 000000000000..5ce2d00991bc --- /dev/null +++ b/rust/alloc/vec/spec_extend.rs @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +use crate::alloc::Allocator; +use crate::collections::{TryReserveError, TryReserveErrorKind}; +use core::iter::TrustedLen; +use core::ptr::{self}; +use core::slice::{self}; + +use super::{IntoIter, SetLenOnDrop, Vec}; + +// Specialization trait used for Vec::extend +#[cfg(not(no_global_oom_handling))] +pub(super) trait SpecExtend<T, I> { + fn spec_extend(&mut self, iter: I); +} + +// Specialization trait used for Vec::try_extend +pub(super) trait TrySpecExtend<T, I> { + fn try_spec_extend(&mut self, iter: I) -> Result<(), TryReserveError>; +} + +#[cfg(not(no_global_oom_handling))] +impl<T, I, A: Allocator> SpecExtend<T, I> for Vec<T, A> +where + I: Iterator<Item = T>, +{ + default fn spec_extend(&mut self, iter: I) { + self.extend_desugared(iter) + } +} + +impl<T, I, A: Allocator> TrySpecExtend<T, I> for Vec<T, A> +where + I: Iterator<Item = T>, +{ + default fn try_spec_extend(&mut self, iter: I) -> Result<(), TryReserveError> { + self.try_extend_desugared(iter) + } +} + +#[cfg(not(no_global_oom_handling))] +impl<T, I, A: Allocator> SpecExtend<T, I> for Vec<T, A> +where + I: TrustedLen<Item = T>, +{ + default fn spec_extend(&mut self, iterator: I) { + // This is the case for a TrustedLen iterator. + let (low, high) = iterator.size_hint(); + if let Some(additional) = high { + debug_assert_eq!( + low, + additional, + "TrustedLen iterator's size hint is not exact: {:?}", + (low, high) + ); + self.reserve(additional); + unsafe { + let mut ptr = self.as_mut_ptr().add(self.len()); + let mut local_len = SetLenOnDrop::new(&mut self.len); + iterator.for_each(move |element| { + ptr::write(ptr, element); + ptr = ptr.offset(1); + // Since the loop executes user code which can panic we have to bump the pointer + // after each step. + // NB can't overflow since we would have had to alloc the address space + local_len.increment_len(1); + }); + } + } else { + // Per TrustedLen contract a `None` upper bound means that the iterator length + // truly exceeds usize::MAX, which would eventually lead to a capacity overflow anyway. + // Since the other branch already panics eagerly (via `reserve()`) we do the same here. + // This avoids additional codegen for a fallback code path which would eventually + // panic anyway. + panic!("capacity overflow"); + } + } +} + +impl<T, I, A: Allocator> TrySpecExtend<T, I> for Vec<T, A> +where + I: TrustedLen<Item = T>, +{ + default fn try_spec_extend(&mut self, iterator: I) -> Result<(), TryReserveError> { + // This is the case for a TrustedLen iterator. + let (low, high) = iterator.size_hint(); + if let Some(additional) = high { + debug_assert_eq!( + low, + additional, + "TrustedLen iterator's size hint is not exact: {:?}", + (low, high) + ); + self.try_reserve(additional)?; + unsafe { + let mut ptr = self.as_mut_ptr().add(self.len()); + let mut local_len = SetLenOnDrop::new(&mut self.len); + iterator.for_each(move |element| { + ptr::write(ptr, element); + ptr = ptr.offset(1); + // Since the loop executes user code which can panic we have to bump the pointer + // after each step. + // NB can't overflow since we would have had to alloc the address space + local_len.increment_len(1); + }); + } + Ok(()) + } else { + Err(TryReserveErrorKind::CapacityOverflow.into()) + } + } +} + +#[cfg(not(no_global_oom_handling))] +impl<T, A: Allocator> SpecExtend<T, IntoIter<T>> for Vec<T, A> { + fn spec_extend(&mut self, mut iterator: IntoIter<T>) { + unsafe { + self.append_elements(iterator.as_slice() as _); + } + iterator.forget_remaining_elements(); + } +} + +impl<T, A: Allocator> TrySpecExtend<T, IntoIter<T>> for Vec<T, A> { + fn try_spec_extend(&mut self, mut iterator: IntoIter<T>) -> Result<(), TryReserveError> { + unsafe { + self.try_append_elements(iterator.as_slice() as _)?; + } + iterator.forget_remaining_elements(); + Ok(()) + } +} + +#[cfg(not(no_global_oom_handling))] +impl<'a, T: 'a, I, A: Allocator + 'a> SpecExtend<&'a T, I> for Vec<T, A> +where + I: Iterator<Item = &'a T>, + T: Clone, +{ + default fn spec_extend(&mut self, iterator: I) { + self.spec_extend(iterator.cloned()) + } +} + +impl<'a, T: 'a, I, A: Allocator + 'a> TrySpecExtend<&'a T, I> for Vec<T, A> +where + I: Iterator<Item = &'a T>, + T: Clone, +{ + default fn try_spec_extend(&mut self, iterator: I) -> Result<(), TryReserveError> { + self.try_spec_extend(iterator.cloned()) + } +} + +#[cfg(not(no_global_oom_handling))] +impl<'a, T: 'a, A: Allocator + 'a> SpecExtend<&'a T, slice::Iter<'a, T>> for Vec<T, A> +where + T: Copy, +{ + fn spec_extend(&mut self, iterator: slice::Iter<'a, T>) { + let slice = iterator.as_slice(); + unsafe { self.append_elements(slice) }; + } +} + +impl<'a, T: 'a, A: Allocator + 'a> TrySpecExtend<&'a T, slice::Iter<'a, T>> for Vec<T, A> +where + T: Copy, +{ + fn try_spec_extend(&mut self, iterator: slice::Iter<'a, T>) -> Result<(), TryReserveError> { + let slice = iterator.as_slice(); + unsafe { self.try_append_elements(slice) } + } +} diff --git a/rust/bindings/bindings_helper.h b/rust/bindings/bindings_helper.h index 75d85bd6c592..50e7a76d5455 100644 --- a/rust/bindings/bindings_helper.h +++ b/rust/bindings/bindings_helper.h @@ -8,6 +8,8 @@ #include <linux/slab.h> #include <linux/refcount.h> +#include <linux/wait.h> +#include <linux/sched.h> /* `bindgen` gets confused at certain things. */ const gfp_t BINDINGS_GFP_KERNEL = GFP_KERNEL; diff --git a/rust/helpers.c b/rust/helpers.c index 09a4d93f9d62..81e80261d597 100644 --- a/rust/helpers.c +++ b/rust/helpers.c @@ -20,7 +20,12 @@ #include <linux/bug.h> #include <linux/build_bug.h> +#include <linux/err.h> #include <linux/refcount.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/sched/signal.h> +#include <linux/wait.h> __noreturn void rust_helper_BUG(void) { @@ -28,6 +33,47 @@ __noreturn void rust_helper_BUG(void) } EXPORT_SYMBOL_GPL(rust_helper_BUG); +void rust_helper_mutex_lock(struct mutex *lock) +{ + mutex_lock(lock); +} +EXPORT_SYMBOL_GPL(rust_helper_mutex_lock); + +void rust_helper___spin_lock_init(spinlock_t *lock, const char *name, + struct lock_class_key *key) +{ +#ifdef CONFIG_DEBUG_SPINLOCK + __raw_spin_lock_init(spinlock_check(lock), name, key, LD_WAIT_CONFIG); +#else + spin_lock_init(lock); +#endif +} +EXPORT_SYMBOL_GPL(rust_helper___spin_lock_init); + +void rust_helper_spin_lock(spinlock_t *lock) +{ + spin_lock(lock); +} +EXPORT_SYMBOL_GPL(rust_helper_spin_lock); + +void rust_helper_spin_unlock(spinlock_t *lock) +{ + spin_unlock(lock); +} +EXPORT_SYMBOL_GPL(rust_helper_spin_unlock); + +void rust_helper_init_wait(struct wait_queue_entry *wq_entry) +{ + init_wait(wq_entry); +} +EXPORT_SYMBOL_GPL(rust_helper_init_wait); + +int rust_helper_signal_pending(struct task_struct *t) +{ + return signal_pending(t); +} +EXPORT_SYMBOL_GPL(rust_helper_signal_pending); + refcount_t rust_helper_REFCOUNT_INIT(int n) { return (refcount_t)REFCOUNT_INIT(n); @@ -46,6 +92,42 @@ bool rust_helper_refcount_dec_and_test(refcount_t *r) } EXPORT_SYMBOL_GPL(rust_helper_refcount_dec_and_test); +__force void *rust_helper_ERR_PTR(long err) +{ + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(rust_helper_ERR_PTR); + +bool rust_helper_IS_ERR(__force const void *ptr) +{ + return IS_ERR(ptr); +} +EXPORT_SYMBOL_GPL(rust_helper_IS_ERR); + +long rust_helper_PTR_ERR(__force const void *ptr) +{ + return PTR_ERR(ptr); +} +EXPORT_SYMBOL_GPL(rust_helper_PTR_ERR); + +struct task_struct *rust_helper_get_current(void) +{ + return current; +} +EXPORT_SYMBOL_GPL(rust_helper_get_current); + +void rust_helper_get_task_struct(struct task_struct *t) +{ + get_task_struct(t); +} +EXPORT_SYMBOL_GPL(rust_helper_get_task_struct); + +void rust_helper_put_task_struct(struct task_struct *t) +{ + put_task_struct(t); +} +EXPORT_SYMBOL_GPL(rust_helper_put_task_struct); + /* * We use `bindgen`'s `--size_t-is-usize` option to bind the C `size_t` type * as the Rust `usize` type, so we can use it in contexts where Rust diff --git a/rust/kernel/error.rs b/rust/kernel/error.rs index 5b9751d7ff1d..5f4114b30b94 100644 --- a/rust/kernel/error.rs +++ b/rust/kernel/error.rs @@ -72,10 +72,47 @@ pub mod code { pub struct Error(core::ffi::c_int); impl Error { + /// Creates an [`Error`] from a kernel error code. + /// + /// It is a bug to pass an out-of-range `errno`. `EINVAL` would + /// be returned in such a case. + pub(crate) fn from_errno(errno: core::ffi::c_int) -> Error { + if errno < -(bindings::MAX_ERRNO as i32) || errno >= 0 { + // TODO: Make it a `WARN_ONCE` once available. + crate::pr_warn!( + "attempted to create `Error` with out of range `errno`: {}", + errno + ); + return code::EINVAL; + } + + // INVARIANT: The check above ensures the type invariant + // will hold. + Error(errno) + } + + /// Creates an [`Error`] from a kernel error code. + /// + /// # Safety + /// + /// `errno` must be within error code range (i.e. `>= -MAX_ERRNO && < 0`). + unsafe fn from_errno_unchecked(errno: core::ffi::c_int) -> Error { + // INVARIANT: The contract ensures the type invariant + // will hold. + Error(errno) + } + /// Returns the kernel error code. - pub fn to_kernel_errno(self) -> core::ffi::c_int { + pub fn to_errno(self) -> core::ffi::c_int { self.0 } + + /// Returns the error encoded as a pointer. + #[allow(dead_code)] + pub(crate) fn to_ptr<T>(self) -> *mut T { + // SAFETY: self.0 is a valid error due to its invariant. + unsafe { bindings::ERR_PTR(self.0.into()) as *mut _ } + } } impl From<AllocError> for Error { @@ -141,3 +178,101 @@ impl From<core::convert::Infallible> for Error { /// it should still be modeled as returning a `Result` rather than /// just an [`Error`]. pub type Result<T = ()> = core::result::Result<T, Error>; + +/// Converts an integer as returned by a C kernel function to an error if it's negative, and +/// `Ok(())` otherwise. +pub fn to_result(err: core::ffi::c_int) -> Result { + if err < 0 { + Err(Error::from_errno(err)) + } else { + Ok(()) + } +} + +/// Transform a kernel "error pointer" to a normal pointer. +/// +/// Some kernel C API functions return an "error pointer" which optionally +/// embeds an `errno`. Callers are supposed to check the returned pointer +/// for errors. This function performs the check and converts the "error pointer" +/// to a normal pointer in an idiomatic fashion. +/// +/// # Examples +/// +/// ```ignore +/// # use kernel::from_err_ptr; +/// # use kernel::bindings; +/// fn devm_platform_ioremap_resource( +/// pdev: &mut PlatformDevice, +/// index: u32, +/// ) -> Result<*mut core::ffi::c_void> { +/// // SAFETY: FFI call. +/// unsafe { +/// from_err_ptr(bindings::devm_platform_ioremap_resource( +/// pdev.to_ptr(), +/// index, +/// )) +/// } +/// } +/// ``` +// TODO: Remove `dead_code` marker once an in-kernel client is available. +#[allow(dead_code)] +pub(crate) fn from_err_ptr<T>(ptr: *mut T) -> Result<*mut T> { + // CAST: Casting a pointer to `*const core::ffi::c_void` is always valid. + let const_ptr: *const core::ffi::c_void = ptr.cast(); + // SAFETY: The FFI function does not deref the pointer. + if unsafe { bindings::IS_ERR(const_ptr) } { + // SAFETY: The FFI function does not deref the pointer. + let err = unsafe { bindings::PTR_ERR(const_ptr) }; + // CAST: If `IS_ERR()` returns `true`, + // then `PTR_ERR()` is guaranteed to return a + // negative value greater-or-equal to `-bindings::MAX_ERRNO`, + // which always fits in an `i16`, as per the invariant above. + // And an `i16` always fits in an `i32`. So casting `err` to + // an `i32` can never overflow, and is always valid. + // + // SAFETY: `IS_ERR()` ensures `err` is a + // negative value greater-or-equal to `-bindings::MAX_ERRNO`. + #[allow(clippy::unnecessary_cast)] + return Err(unsafe { Error::from_errno_unchecked(err as core::ffi::c_int) }); + } + Ok(ptr) +} + +/// Calls a closure returning a [`crate::error::Result<T>`] and converts the result to +/// a C integer result. +/// +/// This is useful when calling Rust functions that return [`crate::error::Result<T>`] +/// from inside `extern "C"` functions that need to return an integer error result. +/// +/// `T` should be convertible from an `i16` via `From<i16>`. +/// +/// # Examples +/// +/// ```ignore +/// # use kernel::from_result; +/// # use kernel::bindings; +/// unsafe extern "C" fn probe_callback( +/// pdev: *mut bindings::platform_device, +/// ) -> core::ffi::c_int { +/// from_result(|| { +/// let ptr = devm_alloc(pdev)?; +/// bindings::platform_set_drvdata(pdev, ptr); +/// Ok(0) +/// }) +/// } +/// ``` +// TODO: Remove `dead_code` marker once an in-kernel client is available. +#[allow(dead_code)] +pub(crate) fn from_result<T, F>(f: F) -> T +where + T: From<i16>, + F: FnOnce() -> Result<T>, +{ + match f() { + Ok(v) => v, + // NO-OVERFLOW: negative `errno`s are no smaller than `-bindings::MAX_ERRNO`, + // `-bindings::MAX_ERRNO` fits in an `i16` as per invariant above, + // therefore a negative `errno` always fits in an `i16` and will not overflow. + Err(e) => T::from(e.to_errno() as i16), + } +} diff --git a/rust/kernel/init.rs b/rust/kernel/init.rs new file mode 100644 index 000000000000..4ebfb08dab11 --- /dev/null +++ b/rust/kernel/init.rs @@ -0,0 +1,1427 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! API to safely and fallibly initialize pinned `struct`s using in-place constructors. +//! +//! It also allows in-place initialization of big `struct`s that would otherwise produce a stack +//! overflow. +//! +//! Most `struct`s from the [`sync`] module need to be pinned, because they contain self-referential +//! `struct`s from C. [Pinning][pinning] is Rust's way of ensuring data does not move. +//! +//! # Overview +//! +//! To initialize a `struct` with an in-place constructor you will need two things: +//! - an in-place constructor, +//! - a memory location that can hold your `struct` (this can be the [stack], an [`Arc<T>`], +//! [`UniqueArc<T>`], [`Box<T>`] or any other smart pointer that implements [`InPlaceInit`]). +//! +//! To get an in-place constructor there are generally three options: +//! - directly creating an in-place constructor using the [`pin_init!`] macro, +//! - a custom function/macro returning an in-place constructor provided by someone else, +//! - using the unsafe function [`pin_init_from_closure()`] to manually create an initializer. +//! +//! Aside from pinned initialization, this API also supports in-place construction without pinning, +//! the macros/types/functions are generally named like the pinned variants without the `pin` +//! prefix. +//! +//! # Examples +//! +//! ## Using the [`pin_init!`] macro +//! +//! If you want to use [`PinInit`], then you will have to annotate your `struct` with +//! `#[`[`pin_data`]`]`. It is a macro that uses `#[pin]` as a marker for +//! [structurally pinned fields]. After doing this, you can then create an in-place constructor via +//! [`pin_init!`]. The syntax is almost the same as normal `struct` initializers. The difference is +//! that you need to write `<-` instead of `:` for fields that you want to initialize in-place. +//! +//! ```rust +//! # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +//! use kernel::{prelude::*, sync::Mutex, new_mutex}; +//! # use core::pin::Pin; +//! #[pin_data] +//! struct Foo { +//! #[pin] +//! a: Mutex<usize>, +//! b: u32, +//! } +//! +//! let foo = pin_init!(Foo { +//! a <- new_mutex!(42, "Foo::a"), +//! b: 24, +//! }); +//! ``` +//! +//! `foo` now is of the type [`impl PinInit<Foo>`]. We can now use any smart pointer that we like +//! (or just the stack) to actually initialize a `Foo`: +//! +//! ```rust +//! # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +//! # use kernel::{prelude::*, sync::Mutex, new_mutex}; +//! # use core::pin::Pin; +//! # #[pin_data] +//! # struct Foo { +//! # #[pin] +//! # a: Mutex<usize>, +//! # b: u32, +//! # } +//! # let foo = pin_init!(Foo { +//! # a <- new_mutex!(42, "Foo::a"), +//! # b: 24, +//! # }); +//! let foo: Result<Pin<Box<Foo>>> = Box::pin_init(foo); +//! ``` +//! +//! For more information see the [`pin_init!`] macro. +//! +//! ## Using a custom function/macro that returns an initializer +//! +//! Many types from the kernel supply a function/macro that returns an initializer, because the +//! above method only works for types where you can access the fields. +//! +//! ```rust +//! # use kernel::{new_mutex, sync::{Arc, Mutex}}; +//! let mtx: Result<Arc<Mutex<usize>>> = Arc::pin_init(new_mutex!(42, "example::mtx")); +//! ``` +//! +//! To declare an init macro/function you just return an [`impl PinInit<T, E>`]: +//! +//! ```rust +//! # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +//! # use kernel::{sync::Mutex, prelude::*, new_mutex, init::PinInit, try_pin_init}; +//! #[pin_data] +//! struct DriverData { +//! #[pin] +//! status: Mutex<i32>, +//! buffer: Box<[u8; 1_000_000]>, +//! } +//! +//! impl DriverData { +//! fn new() -> impl PinInit<Self, Error> { +//! try_pin_init!(Self { +//! status <- new_mutex!(0, "DriverData::status"), +//! buffer: Box::init(kernel::init::zeroed())?, +//! }) +//! } +//! } +//! ``` +//! +//! ## Manual creation of an initializer +//! +//! Often when working with primitives the previous approaches are not sufficient. That is where +//! [`pin_init_from_closure()`] comes in. This `unsafe` function allows you to create a +//! [`impl PinInit<T, E>`] directly from a closure. Of course you have to ensure that the closure +//! actually does the initialization in the correct way. Here are the things to look out for +//! (we are calling the parameter to the closure `slot`): +//! - when the closure returns `Ok(())`, then it has completed the initialization successfully, so +//! `slot` now contains a valid bit pattern for the type `T`, +//! - when the closure returns `Err(e)`, then the caller may deallocate the memory at `slot`, so +//! you need to take care to clean up anything if your initialization fails mid-way, +//! - you may assume that `slot` will stay pinned even after the closure returns until `drop` of +//! `slot` gets called. +//! +//! ```rust +//! use kernel::{prelude::*, init}; +//! use core::{ptr::addr_of_mut, marker::PhantomPinned, pin::Pin}; +//! # mod bindings { +//! # pub struct foo; +//! # pub unsafe fn init_foo(_ptr: *mut foo) {} +//! # pub unsafe fn destroy_foo(_ptr: *mut foo) {} +//! # pub unsafe fn enable_foo(_ptr: *mut foo, _flags: u32) -> i32 { 0 } +//! # } +//! /// # Invariants +//! /// +//! /// `foo` is always initialized +//! #[pin_data(PinnedDrop)] +//! pub struct RawFoo { +//! #[pin] +//! foo: Opaque<bindings::foo>, +//! #[pin] +//! _p: PhantomPinned, +//! } +//! +//! impl RawFoo { +//! pub fn new(flags: u32) -> impl PinInit<Self, Error> { +//! // SAFETY: +//! // - when the closure returns `Ok(())`, then it has successfully initialized and +//! // enabled `foo`, +//! // - when it returns `Err(e)`, then it has cleaned up before +//! unsafe { +//! init::pin_init_from_closure(move |slot: *mut Self| { +//! // `slot` contains uninit memory, avoid creating a reference. +//! let foo = addr_of_mut!((*slot).foo); +//! +//! // Initialize the `foo` +//! bindings::init_foo(Opaque::raw_get(foo)); +//! +//! // Try to enable it. +//! let err = bindings::enable_foo(Opaque::raw_get(foo), flags); +//! if err != 0 { +//! // Enabling has failed, first clean up the foo and then return the error. +//! bindings::destroy_foo(Opaque::raw_get(foo)); +//! return Err(Error::from_kernel_errno(err)); +//! } +//! +//! // All fields of `RawFoo` have been initialized, since `_p` is a ZST. +//! Ok(()) +//! }) +//! } +//! } +//! } +//! +//! #[pinned_drop] +//! impl PinnedDrop for RawFoo { +//! fn drop(self: Pin<&mut Self>) { +//! // SAFETY: Since `foo` is initialized, destroying is safe. +//! unsafe { bindings::destroy_foo(self.foo.get()) }; +//! } +//! } +//! ``` +//! +//! For the special case where initializing a field is a single FFI-function call that cannot fail, +//! there exist the helper function [`Opaque::ffi_init`]. This function initialize a single +//! [`Opaque`] field by just delegating to the supplied closure. You can use these in combination +//! with [`pin_init!`]. +//! +//! For more information on how to use [`pin_init_from_closure()`], take a look at the uses inside +//! the `kernel` crate. The [`sync`] module is a good starting point. +//! +//! [`sync`]: kernel::sync +//! [pinning]: https://doc.rust-lang.org/std/pin/index.html +//! [structurally pinned fields]: +//! https://doc.rust-lang.org/std/pin/index.html#pinning-is-structural-for-field +//! [stack]: crate::stack_pin_init +//! [`Arc<T>`]: crate::sync::Arc +//! [`impl PinInit<Foo>`]: PinInit +//! [`impl PinInit<T, E>`]: PinInit +//! [`impl Init<T, E>`]: Init +//! [`Opaque`]: kernel::types::Opaque +//! [`Opaque::ffi_init`]: kernel::types::Opaque::ffi_init +//! [`pin_data`]: ::macros::pin_data + +use crate::{ + error::{self, Error}, + sync::UniqueArc, +}; +use alloc::boxed::Box; +use core::{ + alloc::AllocError, + cell::Cell, + convert::Infallible, + marker::PhantomData, + mem::MaybeUninit, + num::*, + pin::Pin, + ptr::{self, NonNull}, +}; + +#[doc(hidden)] +pub mod __internal; +#[doc(hidden)] +pub mod macros; + +/// Initialize and pin a type directly on the stack. +/// +/// # Examples +/// +/// ```rust +/// # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +/// # use kernel::{init, pin_init, stack_pin_init, init::*, sync::Mutex, new_mutex}; +/// # use macros::pin_data; +/// # use core::pin::Pin; +/// #[pin_data] +/// struct Foo { +/// #[pin] +/// a: Mutex<usize>, +/// b: Bar, +/// } +/// +/// #[pin_data] +/// struct Bar { +/// x: u32, +/// } +/// +/// stack_pin_init!(let foo = pin_init!(Foo { +/// a <- new_mutex!(42), +/// b: Bar { +/// x: 64, +/// }, +/// })); +/// let foo: Pin<&mut Foo> = foo; +/// pr_info!("a: {}", &*foo.a.lock()); +/// ``` +/// +/// # Syntax +/// +/// A normal `let` binding with optional type annotation. The expression is expected to implement +/// [`PinInit`]/[`Init`] with the error type [`Infallible`]. If you want to use a different error +/// type, then use [`stack_try_pin_init!`]. +#[macro_export] +macro_rules! stack_pin_init { + (let $var:ident $(: $t:ty)? = $val:expr) => { + let val = $val; + let mut $var = ::core::pin::pin!($crate::init::__internal::StackInit$(::<$t>)?::uninit()); + let mut $var = match $crate::init::__internal::StackInit::init($var, val) { + Ok(res) => res, + Err(x) => { + let x: ::core::convert::Infallible = x; + match x {} + } + }; + }; +} + +/// Initialize and pin a type directly on the stack. +/// +/// # Examples +/// +/// ```rust +/// # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +/// # use kernel::{init, pin_init, stack_try_pin_init, init::*, sync::Mutex, new_mutex}; +/// # use macros::pin_data; +/// # use core::{alloc::AllocError, pin::Pin}; +/// #[pin_data] +/// struct Foo { +/// #[pin] +/// a: Mutex<usize>, +/// b: Box<Bar>, +/// } +/// +/// struct Bar { +/// x: u32, +/// } +/// +/// stack_try_pin_init!(let foo: Result<Pin<&mut Foo>, AllocError> = pin_init!(Foo { +/// a <- new_mutex!(42), +/// b: Box::try_new(Bar { +/// x: 64, +/// })?, +/// })); +/// let foo = foo.unwrap(); +/// pr_info!("a: {}", &*foo.a.lock()); +/// ``` +/// +/// ```rust +/// # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +/// # use kernel::{init, pin_init, stack_try_pin_init, init::*, sync::Mutex, new_mutex}; +/// # use macros::pin_data; +/// # use core::{alloc::AllocError, pin::Pin}; +/// #[pin_data] +/// struct Foo { +/// #[pin] +/// a: Mutex<usize>, +/// b: Box<Bar>, +/// } +/// +/// struct Bar { +/// x: u32, +/// } +/// +/// stack_try_pin_init!(let foo: Pin<&mut Foo> =? pin_init!(Foo { +/// a <- new_mutex!(42), +/// b: Box::try_new(Bar { +/// x: 64, +/// })?, +/// })); +/// pr_info!("a: {}", &*foo.a.lock()); +/// # Ok::<_, AllocError>(()) +/// ``` +/// +/// # Syntax +/// +/// A normal `let` binding with optional type annotation. The expression is expected to implement +/// [`PinInit`]/[`Init`]. This macro assigns a result to the given variable, adding a `?` after the +/// `=` will propagate this error. +#[macro_export] +macro_rules! stack_try_pin_init { + (let $var:ident $(: $t:ty)? = $val:expr) => { + let val = $val; + let mut $var = ::core::pin::pin!($crate::init::__internal::StackInit$(::<$t>)?::uninit()); + let mut $var = $crate::init::__internal::StackInit::init($var, val); + }; + (let $var:ident $(: $t:ty)? =? $val:expr) => { + let val = $val; + let mut $var = ::core::pin::pin!($crate::init::__internal::StackInit$(::<$t>)?::uninit()); + let mut $var = $crate::init::__internal::StackInit::init($var, val)?; + }; +} + +/// Construct an in-place, pinned initializer for `struct`s. +/// +/// This macro defaults the error to [`Infallible`]. If you need [`Error`], then use +/// [`try_pin_init!`]. +/// +/// The syntax is almost identical to that of a normal `struct` initializer: +/// +/// ```rust +/// # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +/// # use kernel::{init, pin_init, macros::pin_data, init::*}; +/// # use core::pin::Pin; +/// #[pin_data] +/// struct Foo { +/// a: usize, +/// b: Bar, +/// } +/// +/// #[pin_data] +/// struct Bar { +/// x: u32, +/// } +/// +/// # fn demo() -> impl PinInit<Foo> { +/// let a = 42; +/// +/// let initializer = pin_init!(Foo { +/// a, +/// b: Bar { +/// x: 64, +/// }, +/// }); +/// # initializer } +/// # Box::pin_init(demo()).unwrap(); +/// ``` +/// +/// Arbitrary Rust expressions can be used to set the value of a variable. +/// +/// The fields are initialized in the order that they appear in the initializer. So it is possible +/// to read already initialized fields using raw pointers. +/// +/// IMPORTANT: You are not allowed to create references to fields of the struct inside of the +/// initializer. +/// +/// # Init-functions +/// +/// When working with this API it is often desired to let others construct your types without +/// giving access to all fields. This is where you would normally write a plain function `new` +/// that would return a new instance of your type. With this API that is also possible. +/// However, there are a few extra things to keep in mind. +/// +/// To create an initializer function, simply declare it like this: +/// +/// ```rust +/// # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +/// # use kernel::{init, pin_init, prelude::*, init::*}; +/// # use core::pin::Pin; +/// # #[pin_data] +/// # struct Foo { +/// # a: usize, +/// # b: Bar, +/// # } +/// # #[pin_data] +/// # struct Bar { +/// # x: u32, +/// # } +/// impl Foo { +/// fn new() -> impl PinInit<Self> { +/// pin_init!(Self { +/// a: 42, +/// b: Bar { +/// x: 64, +/// }, +/// }) +/// } +/// } +/// ``` +/// +/// Users of `Foo` can now create it like this: +/// +/// ```rust +/// # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +/// # use kernel::{init, pin_init, macros::pin_data, init::*}; +/// # use core::pin::Pin; +/// # #[pin_data] +/// # struct Foo { +/// # a: usize, +/// # b: Bar, +/// # } +/// # #[pin_data] +/// # struct Bar { +/// # x: u32, +/// # } +/// # impl Foo { +/// # fn new() -> impl PinInit<Self> { +/// # pin_init!(Self { +/// # a: 42, +/// # b: Bar { +/// # x: 64, +/// # }, +/// # }) +/// # } +/// # } +/// let foo = Box::pin_init(Foo::new()); +/// ``` +/// +/// They can also easily embed it into their own `struct`s: +/// +/// ```rust +/// # #![allow(clippy::disallowed_names, clippy::new_ret_no_self)] +/// # use kernel::{init, pin_init, macros::pin_data, init::*}; +/// # use core::pin::Pin; +/// # #[pin_data] +/// # struct Foo { +/// # a: usize, +/// # b: Bar, +/// # } +/// # #[pin_data] +/// # struct Bar { +/// # x: u32, +/// # } +/// # impl Foo { +/// # fn new() -> impl PinInit<Self> { +/// # pin_init!(Self { +/// # a: 42, +/// # b: Bar { +/// # x: 64, +/// # }, +/// # }) +/// # } +/// # } +/// #[pin_data] +/// struct FooContainer { +/// #[pin] +/// foo1: Foo, +/// #[pin] +/// foo2: Foo, +/// other: u32, +/// } +/// +/// impl FooContainer { +/// fn new(other: u32) -> impl PinInit<Self> { +/// pin_init!(Self { +/// foo1 <- Foo::new(), +/// foo2 <- Foo::new(), +/// other, +/// }) +/// } +/// } +/// ``` +/// +/// Here we see that when using `pin_init!` with `PinInit`, one needs to write `<-` instead of `:`. +/// This signifies that the given field is initialized in-place. As with `struct` initializers, just +/// writing the field (in this case `other`) without `:` or `<-` means `other: other,`. +/// +/// # Syntax +/// +/// As already mentioned in the examples above, inside of `pin_init!` a `struct` initializer with +/// the following modifications is expected: +/// - Fields that you want to initialize in-place have to use `<-` instead of `:`. +/// - In front of the initializer you can write `&this in` to have access to a [`NonNull<Self>`] +/// pointer named `this` inside of the initializer. +/// +/// For instance: +/// +/// ```rust +/// # use kernel::pin_init; +/// # use macros::pin_data; +/// # use core::{ptr::addr_of_mut, marker::PhantomPinned}; +/// #[pin_data] +/// struct Buf { +/// // `ptr` points into `buf`. +/// ptr: *mut u8, +/// buf: [u8; 64], +/// #[pin] +/// pin: PhantomPinned, +/// } +/// pin_init!(&this in Buf { +/// buf: [0; 64], +/// ptr: unsafe { addr_of_mut!((*this.as_ptr()).buf).cast() }, +/// pin: PhantomPinned, +/// }); +/// ``` +/// +/// [`try_pin_init!`]: kernel::try_pin_init +/// [`NonNull<Self>`]: core::ptr::NonNull +// For a detailed example of how this macro works, see the module documentation of the hidden +// module `__internal` inside of `init/__internal.rs`. +#[macro_export] +macro_rules! pin_init { + ($(&$this:ident in)? $t:ident $(::<$($generics:ty),* $(,)?>)? { + $($fields:tt)* + }) => { + $crate::try_pin_init!( + @this($($this)?), + @typ($t $(::<$($generics),*>)?), + @fields($($fields)*), + @error(::core::convert::Infallible), + ) + }; +} + +/// Construct an in-place, fallible pinned initializer for `struct`s. +/// +/// If the initialization can complete without error (or [`Infallible`]), then use [`pin_init!`]. +/// +/// You can use the `?` operator or use `return Err(err)` inside the initializer to stop +/// initialization and return the error. +/// +/// IMPORTANT: if you have `unsafe` code inside of the initializer you have to ensure that when +/// initialization fails, the memory can be safely deallocated without any further modifications. +/// +/// This macro defaults the error to [`Error`]. +/// +/// The syntax is identical to [`pin_init!`] with the following exception: you can append `? $type` +/// after the `struct` initializer to specify the error type you want to use. +/// +/// # Examples +/// +/// ```rust +/// # #![feature(new_uninit)] +/// use kernel::{init::{self, PinInit}, error::Error}; +/// #[pin_data] +/// struct BigBuf { +/// big: Box<[u8; 1024 * 1024 * 1024]>, +/// small: [u8; 1024 * 1024], +/// ptr: *mut u8, +/// } +/// +/// impl BigBuf { +/// fn new() -> impl PinInit<Self, Error> { +/// try_pin_init!(Self { +/// big: Box::init(init::zeroed())?, +/// small: [0; 1024 * 1024], +/// ptr: core::ptr::null_mut(), +/// }? Error) +/// } +/// } +/// ``` +// For a detailed example of how this macro works, see the module documentation of the hidden +// module `__internal` inside of `init/__internal.rs`. +#[macro_export] +macro_rules! try_pin_init { + ($(&$this:ident in)? $t:ident $(::<$($generics:ty),* $(,)?>)? { + $($fields:tt)* + }) => { + $crate::try_pin_init!( + @this($($this)?), + @typ($t $(::<$($generics),*>)? ), + @fields($($fields)*), + @error($crate::error::Error), + ) + }; + ($(&$this:ident in)? $t:ident $(::<$($generics:ty),* $(,)?>)? { + $($fields:tt)* + }? $err:ty) => { + $crate::try_pin_init!( + @this($($this)?), + @typ($t $(::<$($generics),*>)? ), + @fields($($fields)*), + @error($err), + ) + }; + ( + @this($($this:ident)?), + @typ($t:ident $(::<$($generics:ty),*>)?), + @fields($($fields:tt)*), + @error($err:ty), + ) => {{ + // We do not want to allow arbitrary returns, so we declare this type as the `Ok` return + // type and shadow it later when we insert the arbitrary user code. That way there will be + // no possibility of returning without `unsafe`. + struct __InitOk; + // Get the pin data from the supplied type. + let data = unsafe { + use $crate::init::__internal::HasPinData; + $t$(::<$($generics),*>)?::__pin_data() + }; + // Ensure that `data` really is of type `PinData` and help with type inference: + let init = $crate::init::__internal::PinData::make_closure::<_, __InitOk, $err>( + data, + move |slot| { + { + // Shadow the structure so it cannot be used to return early. + struct __InitOk; + // Create the `this` so it can be referenced by the user inside of the + // expressions creating the individual fields. + $(let $this = unsafe { ::core::ptr::NonNull::new_unchecked(slot) };)? + // Initialize every field. + $crate::try_pin_init!(init_slot: + @data(data), + @slot(slot), + @munch_fields($($fields)*,), + ); + // We use unreachable code to ensure that all fields have been mentioned exactly + // once, this struct initializer will still be type-checked and complain with a + // very natural error message if a field is forgotten/mentioned more than once. + #[allow(unreachable_code, clippy::diverging_sub_expression)] + if false { + $crate::try_pin_init!(make_initializer: + @slot(slot), + @type_name($t), + @munch_fields($($fields)*,), + @acc(), + ); + } + // Forget all guards, since initialization was a success. + $crate::try_pin_init!(forget_guards: + @munch_fields($($fields)*,), + ); + } + Ok(__InitOk) + } + ); + let init = move |slot| -> ::core::result::Result<(), $err> { + init(slot).map(|__InitOk| ()) + }; + let init = unsafe { $crate::init::pin_init_from_closure::<_, $err>(init) }; + init + }}; + (init_slot: + @data($data:ident), + @slot($slot:ident), + @munch_fields($(,)?), + ) => { + // Endpoint of munching, no fields are left. + }; + (init_slot: + @data($data:ident), + @slot($slot:ident), + // In-place initialization syntax. + @munch_fields($field:ident <- $val:expr, $($rest:tt)*), + ) => { + let $field = $val; + // Call the initializer. + // + // SAFETY: `slot` is valid, because we are inside of an initializer closure, we + // return when an error/panic occurs. + // We also use the `data` to require the correct trait (`Init` or `PinInit`) for `$field`. + unsafe { $data.$field(::core::ptr::addr_of_mut!((*$slot).$field), $field)? }; + // Create the drop guard. + // + // We only give access to `&DropGuard`, so it cannot be forgotten via safe code. + // + // SAFETY: We forget the guard later when initialization has succeeded. + let $field = &unsafe { + $crate::init::__internal::DropGuard::new(::core::ptr::addr_of_mut!((*$slot).$field)) + }; + + $crate::try_pin_init!(init_slot: + @data($data), + @slot($slot), + @munch_fields($($rest)*), + ); + }; + (init_slot: + @data($data:ident), + @slot($slot:ident), + // Direct value init, this is safe for every field. + @munch_fields($field:ident $(: $val:expr)?, $($rest:tt)*), + ) => { + $(let $field = $val;)? + // Initialize the field. + // + // SAFETY: The memory at `slot` is uninitialized. + unsafe { ::core::ptr::write(::core::ptr::addr_of_mut!((*$slot).$field), $field) }; + // Create the drop guard: + // + // We only give access to `&DropGuard`, so it cannot be accidentally forgotten. + // + // SAFETY: We forget the guard later when initialization has succeeded. + let $field = &unsafe { + $crate::init::__internal::DropGuard::new(::core::ptr::addr_of_mut!((*$slot).$field)) + }; + + $crate::try_pin_init!(init_slot: + @data($data), + @slot($slot), + @munch_fields($($rest)*), + ); + }; + (make_initializer: + @slot($slot:ident), + @type_name($t:ident), + @munch_fields($(,)?), + @acc($($acc:tt)*), + ) => { + // Endpoint, nothing more to munch, create the initializer. + // Since we are in the `if false` branch, this will never get executed. We abuse `slot` to + // get the correct type inference here: + unsafe { + ::core::ptr::write($slot, $t { + $($acc)* + }); + } + }; + (make_initializer: + @slot($slot:ident), + @type_name($t:ident), + @munch_fields($field:ident <- $val:expr, $($rest:tt)*), + @acc($($acc:tt)*), + ) => { + $crate::try_pin_init!(make_initializer: + @slot($slot), + @type_name($t), + @munch_fields($($rest)*), + @acc($($acc)* $field: ::core::panic!(),), + ); + }; + (make_initializer: + @slot($slot:ident), + @type_name($t:ident), + @munch_fields($field:ident $(: $val:expr)?, $($rest:tt)*), + @acc($($acc:tt)*), + ) => { + $crate::try_pin_init!(make_initializer: + @slot($slot), + @type_name($t), + @munch_fields($($rest)*), + @acc($($acc)* $field: ::core::panic!(),), + ); + }; + (forget_guards: + @munch_fields($(,)?), + ) => { + // Munching finished. + }; + (forget_guards: + @munch_fields($field:ident <- $val:expr, $($rest:tt)*), + ) => { + unsafe { $crate::init::__internal::DropGuard::forget($field) }; + + $crate::try_pin_init!(forget_guards: + @munch_fields($($rest)*), + ); + }; + (forget_guards: + @munch_fields($field:ident $(: $val:expr)?, $($rest:tt)*), + ) => { + unsafe { $crate::init::__internal::DropGuard::forget($field) }; + + $crate::try_pin_init!(forget_guards: + @munch_fields($($rest)*), + ); + }; +} + +/// Construct an in-place initializer for `struct`s. +/// +/// This macro defaults the error to [`Infallible`]. If you need [`Error`], then use +/// [`try_init!`]. +/// +/// The syntax is identical to [`pin_init!`] and its safety caveats also apply: +/// - `unsafe` code must guarantee either full initialization or return an error and allow +/// deallocation of the memory. +/// - the fields are initialized in the order given in the initializer. +/// - no references to fields are allowed to be created inside of the initializer. +/// +/// This initializer is for initializing data in-place that might later be moved. If you want to +/// pin-initialize, use [`pin_init!`]. +// For a detailed example of how this macro works, see the module documentation of the hidden +// module `__internal` inside of `init/__internal.rs`. +#[macro_export] +macro_rules! init { + ($(&$this:ident in)? $t:ident $(::<$($generics:ty),* $(,)?>)? { + $($fields:tt)* + }) => { + $crate::try_init!( + @this($($this)?), + @typ($t $(::<$($generics),*>)?), + @fields($($fields)*), + @error(::core::convert::Infallible), + ) + } +} + +/// Construct an in-place fallible initializer for `struct`s. +/// +/// This macro defaults the error to [`Error`]. If you need [`Infallible`], then use +/// [`init!`]. +/// +/// The syntax is identical to [`try_pin_init!`]. If you want to specify a custom error, +/// append `? $type` after the `struct` initializer. +/// The safety caveats from [`try_pin_init!`] also apply: +/// - `unsafe` code must guarantee either full initialization or return an error and allow +/// deallocation of the memory. +/// - the fields are initialized in the order given in the initializer. +/// - no references to fields are allowed to be created inside of the initializer. +/// +/// # Examples +/// +/// ```rust +/// use kernel::{init::PinInit, error::Error, InPlaceInit}; +/// struct BigBuf { +/// big: Box<[u8; 1024 * 1024 * 1024]>, +/// small: [u8; 1024 * 1024], +/// } +/// +/// impl BigBuf { +/// fn new() -> impl Init<Self, Error> { +/// try_init!(Self { +/// big: Box::init(zeroed())?, +/// small: [0; 1024 * 1024], +/// }? Error) +/// } +/// } +/// ``` +// For a detailed example of how this macro works, see the module documentation of the hidden +// module `__internal` inside of `init/__internal.rs`. +#[macro_export] +macro_rules! try_init { + ($(&$this:ident in)? $t:ident $(::<$($generics:ty),* $(,)?>)? { + $($fields:tt)* + }) => { + $crate::try_init!( + @this($($this)?), + @typ($t $(::<$($generics),*>)?), + @fields($($fields)*), + @error($crate::error::Error), + ) + }; + ($(&$this:ident in)? $t:ident $(::<$($generics:ty),* $(,)?>)? { + $($fields:tt)* + }? $err:ty) => { + $crate::try_init!( + @this($($this)?), + @typ($t $(::<$($generics),*>)?), + @fields($($fields)*), + @error($err), + ) + }; + ( + @this($($this:ident)?), + @typ($t:ident $(::<$($generics:ty),*>)?), + @fields($($fields:tt)*), + @error($err:ty), + ) => {{ + // We do not want to allow arbitrary returns, so we declare this type as the `Ok` return + // type and shadow it later when we insert the arbitrary user code. That way there will be + // no possibility of returning without `unsafe`. + struct __InitOk; + // Get the init data from the supplied type. + let data = unsafe { + use $crate::init::__internal::HasInitData; + $t$(::<$($generics),*>)?::__init_data() + }; + // Ensure that `data` really is of type `InitData` and help with type inference: + let init = $crate::init::__internal::InitData::make_closure::<_, __InitOk, $err>( + data, + move |slot| { + { + // Shadow the structure so it cannot be used to return early. + struct __InitOk; + // Create the `this` so it can be referenced by the user inside of the + // expressions creating the individual fields. + $(let $this = unsafe { ::core::ptr::NonNull::new_unchecked(slot) };)? + // Initialize every field. + $crate::try_init!(init_slot: + @slot(slot), + @munch_fields($($fields)*,), + ); + // We use unreachable code to ensure that all fields have been mentioned exactly + // once, this struct initializer will still be type-checked and complain with a + // very natural error message if a field is forgotten/mentioned more than once. + #[allow(unreachable_code, clippy::diverging_sub_expression)] + if false { + $crate::try_init!(make_initializer: + @slot(slot), + @type_name($t), + @munch_fields($($fields)*,), + @acc(), + ); + } + // Forget all guards, since initialization was a success. + $crate::try_init!(forget_guards: + @munch_fields($($fields)*,), + ); + } + Ok(__InitOk) + } + ); + let init = move |slot| -> ::core::result::Result<(), $err> { + init(slot).map(|__InitOk| ()) + }; + let init = unsafe { $crate::init::init_from_closure::<_, $err>(init) }; + init + }}; + (init_slot: + @slot($slot:ident), + @munch_fields( $(,)?), + ) => { + // Endpoint of munching, no fields are left. + }; + (init_slot: + @slot($slot:ident), + @munch_fields($field:ident <- $val:expr, $($rest:tt)*), + ) => { + let $field = $val; + // Call the initializer. + // + // SAFETY: `slot` is valid, because we are inside of an initializer closure, we + // return when an error/panic occurs. + unsafe { + $crate::init::Init::__init($field, ::core::ptr::addr_of_mut!((*$slot).$field))?; + } + // Create the drop guard. + // + // We only give access to `&DropGuard`, so it cannot be accidentally forgotten. + // + // SAFETY: We forget the guard later when initialization has succeeded. + let $field = &unsafe { + $crate::init::__internal::DropGuard::new(::core::ptr::addr_of_mut!((*$slot).$field)) + }; + + $crate::try_init!(init_slot: + @slot($slot), + @munch_fields($($rest)*), + ); + }; + (init_slot: + @slot($slot:ident), + // Direct value init. + @munch_fields($field:ident $(: $val:expr)?, $($rest:tt)*), + ) => { + $(let $field = $val;)? + // Call the initializer. + // + // SAFETY: The memory at `slot` is uninitialized. + unsafe { ::core::ptr::write(::core::ptr::addr_of_mut!((*$slot).$field), $field) }; + // Create the drop guard. + // + // We only give access to `&DropGuard`, so it cannot be accidentally forgotten. + // + // SAFETY: We forget the guard later when initialization has succeeded. + let $field = &unsafe { + $crate::init::__internal::DropGuard::new(::core::ptr::addr_of_mut!((*$slot).$field)) + }; + + $crate::try_init!(init_slot: + @slot($slot), + @munch_fields($($rest)*), + ); + }; + (make_initializer: + @slot($slot:ident), + @type_name($t:ident), + @munch_fields( $(,)?), + @acc($($acc:tt)*), + ) => { + // Endpoint, nothing more to munch, create the initializer. + // Since we are in the `if false` branch, this will never get executed. We abuse `slot` to + // get the correct type inference here: + unsafe { + ::core::ptr::write($slot, $t { + $($acc)* + }); + } + }; + (make_initializer: + @slot($slot:ident), + @type_name($t:ident), + @munch_fields($field:ident <- $val:expr, $($rest:tt)*), + @acc($($acc:tt)*), + ) => { + $crate::try_init!(make_initializer: + @slot($slot), + @type_name($t), + @munch_fields($($rest)*), + @acc($($acc)*$field: ::core::panic!(),), + ); + }; + (make_initializer: + @slot($slot:ident), + @type_name($t:ident), + @munch_fields($field:ident $(: $val:expr)?, $($rest:tt)*), + @acc($($acc:tt)*), + ) => { + $crate::try_init!(make_initializer: + @slot($slot), + @type_name($t), + @munch_fields($($rest)*), + @acc($($acc)*$field: ::core::panic!(),), + ); + }; + (forget_guards: + @munch_fields($(,)?), + ) => { + // Munching finished. + }; + (forget_guards: + @munch_fields($field:ident <- $val:expr, $($rest:tt)*), + ) => { + unsafe { $crate::init::__internal::DropGuard::forget($field) }; + + $crate::try_init!(forget_guards: + @munch_fields($($rest)*), + ); + }; + (forget_guards: + @munch_fields($field:ident $(: $val:expr)?, $($rest:tt)*), + ) => { + unsafe { $crate::init::__internal::DropGuard::forget($field) }; + + $crate::try_init!(forget_guards: + @munch_fields($($rest)*), + ); + }; +} + +/// A pin-initializer for the type `T`. +/// +/// To use this initializer, you will need a suitable memory location that can hold a `T`. This can +/// be [`Box<T>`], [`Arc<T>`], [`UniqueArc<T>`] or even the stack (see [`stack_pin_init!`]). Use the +/// [`InPlaceInit::pin_init`] function of a smart pointer like [`Arc<T>`] on this. +/// +/// Also see the [module description](self). +/// +/// # Safety +/// +/// When implementing this type you will need to take great care. Also there are probably very few +/// cases where a manual implementation is necessary. Use [`pin_init_from_closure`] where possible. +/// +/// The [`PinInit::__pinned_init`] function +/// - returns `Ok(())` if it initialized every field of `slot`, +/// - returns `Err(err)` if it encountered an error and then cleaned `slot`, this means: +/// - `slot` can be deallocated without UB occurring, +/// - `slot` does not need to be dropped, +/// - `slot` is not partially initialized. +/// - while constructing the `T` at `slot` it upholds the pinning invariants of `T`. +/// +/// [`Arc<T>`]: crate::sync::Arc +/// [`Arc::pin_init`]: crate::sync::Arc::pin_init +#[must_use = "An initializer must be used in order to create its value."] +pub unsafe trait PinInit<T: ?Sized, E = Infallible>: Sized { + /// Initializes `slot`. + /// + /// # Safety + /// + /// - `slot` is a valid pointer to uninitialized memory. + /// - the caller does not touch `slot` when `Err` is returned, they are only permitted to + /// deallocate. + /// - `slot` will not move until it is dropped, i.e. it will be pinned. + unsafe fn __pinned_init(self, slot: *mut T) -> Result<(), E>; +} + +/// An initializer for `T`. +/// +/// To use this initializer, you will need a suitable memory location that can hold a `T`. This can +/// be [`Box<T>`], [`Arc<T>`], [`UniqueArc<T>`] or even the stack (see [`stack_pin_init!`]). Use the +/// [`InPlaceInit::init`] function of a smart pointer like [`Arc<T>`] on this. Because +/// [`PinInit<T, E>`] is a super trait, you can use every function that takes it as well. +/// +/// Also see the [module description](self). +/// +/// # Safety +/// +/// When implementing this type you will need to take great care. Also there are probably very few +/// cases where a manual implementation is necessary. Use [`init_from_closure`] where possible. +/// +/// The [`Init::__init`] function +/// - returns `Ok(())` if it initialized every field of `slot`, +/// - returns `Err(err)` if it encountered an error and then cleaned `slot`, this means: +/// - `slot` can be deallocated without UB occurring, +/// - `slot` does not need to be dropped, +/// - `slot` is not partially initialized. +/// - while constructing the `T` at `slot` it upholds the pinning invariants of `T`. +/// +/// The `__pinned_init` function from the supertrait [`PinInit`] needs to execute the exact same +/// code as `__init`. +/// +/// Contrary to its supertype [`PinInit<T, E>`] the caller is allowed to +/// move the pointee after initialization. +/// +/// [`Arc<T>`]: crate::sync::Arc +#[must_use = "An initializer must be used in order to create its value."] +pub unsafe trait Init<T: ?Sized, E = Infallible>: Sized { + /// Initializes `slot`. + /// + /// # Safety + /// + /// - `slot` is a valid pointer to uninitialized memory. + /// - the caller does not touch `slot` when `Err` is returned, they are only permitted to + /// deallocate. + unsafe fn __init(self, slot: *mut T) -> Result<(), E>; +} + +// SAFETY: Every in-place initializer can also be used as a pin-initializer. +unsafe impl<T: ?Sized, E, I> PinInit<T, E> for I +where + I: Init<T, E>, +{ + unsafe fn __pinned_init(self, slot: *mut T) -> Result<(), E> { + // SAFETY: `__init` meets the same requirements as `__pinned_init`, except that it does not + // require `slot` to not move after init. + unsafe { self.__init(slot) } + } +} + +/// Creates a new [`PinInit<T, E>`] from the given closure. +/// +/// # Safety +/// +/// The closure: +/// - returns `Ok(())` if it initialized every field of `slot`, +/// - returns `Err(err)` if it encountered an error and then cleaned `slot`, this means: +/// - `slot` can be deallocated without UB occurring, +/// - `slot` does not need to be dropped, +/// - `slot` is not partially initialized. +/// - may assume that the `slot` does not move if `T: !Unpin`, +/// - while constructing the `T` at `slot` it upholds the pinning invariants of `T`. +#[inline] +pub const unsafe fn pin_init_from_closure<T: ?Sized, E>( + f: impl FnOnce(*mut T) -> Result<(), E>, +) -> impl PinInit<T, E> { + __internal::InitClosure(f, PhantomData) +} + +/// Creates a new [`Init<T, E>`] from the given closure. +/// +/// # Safety +/// +/// The closure: +/// - returns `Ok(())` if it initialized every field of `slot`, +/// - returns `Err(err)` if it encountered an error and then cleaned `slot`, this means: +/// - `slot` can be deallocated without UB occurring, +/// - `slot` does not need to be dropped, +/// - `slot` is not partially initialized. +/// - the `slot` may move after initialization. +/// - while constructing the `T` at `slot` it upholds the pinning invariants of `T`. +#[inline] +pub const unsafe fn init_from_closure<T: ?Sized, E>( + f: impl FnOnce(*mut T) -> Result<(), E>, +) -> impl Init<T, E> { + __internal::InitClosure(f, PhantomData) +} + +/// An initializer that leaves the memory uninitialized. +/// +/// The initializer is a no-op. The `slot` memory is not changed. +#[inline] +pub fn uninit<T, E>() -> impl Init<MaybeUninit<T>, E> { + // SAFETY: The memory is allowed to be uninitialized. + unsafe { init_from_closure(|_| Ok(())) } +} + +// SAFETY: Every type can be initialized by-value. +unsafe impl<T, E> Init<T, E> for T { + unsafe fn __init(self, slot: *mut T) -> Result<(), E> { + unsafe { slot.write(self) }; + Ok(()) + } +} + +/// Smart pointer that can initialize memory in-place. +pub trait InPlaceInit<T>: Sized { + /// Use the given pin-initializer to pin-initialize a `T` inside of a new smart pointer of this + /// type. + /// + /// If `T: !Unpin` it will not be able to move afterwards. + fn try_pin_init<E>(init: impl PinInit<T, E>) -> Result<Pin<Self>, E> + where + E: From<AllocError>; + + /// Use the given pin-initializer to pin-initialize a `T` inside of a new smart pointer of this + /// type. + /// + /// If `T: !Unpin` it will not be able to move afterwards. + fn pin_init<E>(init: impl PinInit<T, E>) -> error::Result<Pin<Self>> + where + Error: From<E>, + { + // SAFETY: We delegate to `init` and only change the error type. + let init = unsafe { + pin_init_from_closure(|slot| init.__pinned_init(slot).map_err(|e| Error::from(e))) + }; + Self::try_pin_init(init) + } + + /// Use the given initializer to in-place initialize a `T`. + fn try_init<E>(init: impl Init<T, E>) -> Result<Self, E> + where + E: From<AllocError>; + + /// Use the given initializer to in-place initialize a `T`. + fn init<E>(init: impl Init<T, E>) -> error::Result<Self> + where + Error: From<E>, + { + // SAFETY: We delegate to `init` and only change the error type. + let init = unsafe { + init_from_closure(|slot| init.__pinned_init(slot).map_err(|e| Error::from(e))) + }; + Self::try_init(init) + } +} + +impl<T> InPlaceInit<T> for Box<T> { + #[inline] + fn try_pin_init<E>(init: impl PinInit<T, E>) -> Result<Pin<Self>, E> + where + E: From<AllocError>, + { + let mut this = Box::try_new_uninit()?; + let slot = this.as_mut_ptr(); + // SAFETY: When init errors/panics, slot will get deallocated but not dropped, + // slot is valid and will not be moved, because we pin it later. + unsafe { init.__pinned_init(slot)? }; + // SAFETY: All fields have been initialized. + Ok(unsafe { this.assume_init() }.into()) + } + + #[inline] + fn try_init<E>(init: impl Init<T, E>) -> Result<Self, E> + where + E: From<AllocError>, + { + let mut this = Box::try_new_uninit()?; + let slot = this.as_mut_ptr(); + // SAFETY: When init errors/panics, slot will get deallocated but not dropped, + // slot is valid. + unsafe { init.__init(slot)? }; + // SAFETY: All fields have been initialized. + Ok(unsafe { this.assume_init() }) + } +} + +impl<T> InPlaceInit<T> for UniqueArc<T> { + #[inline] + fn try_pin_init<E>(init: impl PinInit<T, E>) -> Result<Pin<Self>, E> + where + E: From<AllocError>, + { + let mut this = UniqueArc::try_new_uninit()?; + let slot = this.as_mut_ptr(); + // SAFETY: When init errors/panics, slot will get deallocated but not dropped, + // slot is valid and will not be moved, because we pin it later. + unsafe { init.__pinned_init(slot)? }; + // SAFETY: All fields have been initialized. + Ok(unsafe { this.assume_init() }.into()) + } + + #[inline] + fn try_init<E>(init: impl Init<T, E>) -> Result<Self, E> + where + E: From<AllocError>, + { + let mut this = UniqueArc::try_new_uninit()?; + let slot = this.as_mut_ptr(); + // SAFETY: When init errors/panics, slot will get deallocated but not dropped, + // slot is valid. + unsafe { init.__init(slot)? }; + // SAFETY: All fields have been initialized. + Ok(unsafe { this.assume_init() }) + } +} + +/// Trait facilitating pinned destruction. +/// +/// Use [`pinned_drop`] to implement this trait safely: +/// +/// ```rust +/// # use kernel::sync::Mutex; +/// use kernel::macros::pinned_drop; +/// use core::pin::Pin; +/// #[pin_data(PinnedDrop)] +/// struct Foo { +/// #[pin] +/// mtx: Mutex<usize>, +/// } +/// +/// #[pinned_drop] +/// impl PinnedDrop for Foo { +/// fn drop(self: Pin<&mut Self>) { +/// pr_info!("Foo is being dropped!"); +/// } +/// } +/// ``` +/// +/// # Safety +/// +/// This trait must be implemented via the [`pinned_drop`] proc-macro attribute on the impl. +/// +/// [`pinned_drop`]: kernel::macros::pinned_drop +pub unsafe trait PinnedDrop: __internal::HasPinData { + /// Executes the pinned destructor of this type. + /// + /// While this function is marked safe, it is actually unsafe to call it manually. For this + /// reason it takes an additional parameter. This type can only be constructed by `unsafe` code + /// and thus prevents this function from being called where it should not. + /// + /// This extra parameter will be generated by the `#[pinned_drop]` proc-macro attribute + /// automatically. + fn drop(self: Pin<&mut Self>, only_call_from_drop: __internal::OnlyCallFromDrop); +} + +/// Marker trait for types that can be initialized by writing just zeroes. +/// +/// # Safety +/// +/// The bit pattern consisting of only zeroes is a valid bit pattern for this type. In other words, +/// this is not UB: +/// +/// ```rust,ignore +/// let val: Self = unsafe { core::mem::zeroed() }; +/// ``` +pub unsafe trait Zeroable {} + +/// Create a new zeroed T. +/// +/// The returned initializer will write `0x00` to every byte of the given `slot`. +#[inline] +pub fn zeroed<T: Zeroable>() -> impl Init<T> { + // SAFETY: Because `T: Zeroable`, all bytes zero is a valid bit pattern for `T` + // and because we write all zeroes, the memory is initialized. + unsafe { + init_from_closure(|slot: *mut T| { + slot.write_bytes(0, 1); + Ok(()) + }) + } +} + +macro_rules! impl_zeroable { + ($($({$($generics:tt)*})? $t:ty, )*) => { + $(unsafe impl$($($generics)*)? Zeroable for $t {})* + }; +} + +impl_zeroable! { + // SAFETY: All primitives that are allowed to be zero. + bool, + char, + u8, u16, u32, u64, u128, usize, + i8, i16, i32, i64, i128, isize, + f32, f64, + + // SAFETY: These are ZSTs, there is nothing to zero. + {<T: ?Sized>} PhantomData<T>, core::marker::PhantomPinned, Infallible, (), + + // SAFETY: Type is allowed to take any value, including all zeros. + {<T>} MaybeUninit<T>, + + // SAFETY: All zeros is equivalent to `None` (option layout optimization guarantee). + Option<NonZeroU8>, Option<NonZeroU16>, Option<NonZeroU32>, Option<NonZeroU64>, + Option<NonZeroU128>, Option<NonZeroUsize>, + Option<NonZeroI8>, Option<NonZeroI16>, Option<NonZeroI32>, Option<NonZeroI64>, + Option<NonZeroI128>, Option<NonZeroIsize>, + + // SAFETY: All zeros is equivalent to `None` (option layout optimization guarantee). + // + // In this case we are allowed to use `T: ?Sized`, since all zeros is the `None` variant. + {<T: ?Sized>} Option<NonNull<T>>, + {<T: ?Sized>} Option<Box<T>>, + + // SAFETY: `null` pointer is valid. + // + // We cannot use `T: ?Sized`, since the VTABLE pointer part of fat pointers is not allowed to be + // null. + // + // When `Pointee` gets stabilized, we could use + // `T: ?Sized where <T as Pointee>::Metadata: Zeroable` + {<T>} *mut T, {<T>} *const T, + + // SAFETY: `null` pointer is valid and the metadata part of these fat pointers is allowed to be + // zero. + {<T>} *mut [T], {<T>} *const [T], *mut str, *const str, + + // SAFETY: `T` is `Zeroable`. + {<const N: usize, T: Zeroable>} [T; N], {<T: Zeroable>} Wrapping<T>, +} + +macro_rules! impl_tuple_zeroable { + ($(,)?) => {}; + ($first:ident, $($t:ident),* $(,)?) => { + // SAFETY: All elements are zeroable and padding can be zero. + unsafe impl<$first: Zeroable, $($t: Zeroable),*> Zeroable for ($first, $($t),*) {} + impl_tuple_zeroable!($($t),* ,); + } +} + +impl_tuple_zeroable!(A, B, C, D, E, F, G, H, I, J); diff --git a/rust/kernel/init/__internal.rs b/rust/kernel/init/__internal.rs new file mode 100644 index 000000000000..44751fb62b51 --- /dev/null +++ b/rust/kernel/init/__internal.rs @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! This module contains API-internal items for pin-init. +//! +//! These items must not be used outside of +//! - `kernel/init.rs` +//! - `macros/pin_data.rs` +//! - `macros/pinned_drop.rs` + +use super::*; + +/// See the [nomicon] for what subtyping is. See also [this table]. +/// +/// [nomicon]: https://doc.rust-lang.org/nomicon/subtyping.html +/// [this table]: https://doc.rust-lang.org/nomicon/phantom-data.html#table-of-phantomdata-patterns +type Invariant<T> = PhantomData<fn(*mut T) -> *mut T>; + +/// This is the module-internal type implementing `PinInit` and `Init`. It is unsafe to create this +/// type, since the closure needs to fulfill the same safety requirement as the +/// `__pinned_init`/`__init` functions. +pub(crate) struct InitClosure<F, T: ?Sized, E>(pub(crate) F, pub(crate) Invariant<(E, T)>); + +// SAFETY: While constructing the `InitClosure`, the user promised that it upholds the +// `__init` invariants. +unsafe impl<T: ?Sized, F, E> Init<T, E> for InitClosure<F, T, E> +where + F: FnOnce(*mut T) -> Result<(), E>, +{ + #[inline] + unsafe fn __init(self, slot: *mut T) -> Result<(), E> { + (self.0)(slot) + } +} + +/// This trait is only implemented via the `#[pin_data]` proc-macro. It is used to facilitate +/// the pin projections within the initializers. +/// +/// # Safety +/// +/// Only the `init` module is allowed to use this trait. +pub unsafe trait HasPinData { + type PinData: PinData; + + unsafe fn __pin_data() -> Self::PinData; +} + +/// Marker trait for pinning data of structs. +/// +/// # Safety +/// +/// Only the `init` module is allowed to use this trait. +pub unsafe trait PinData: Copy { + type Datee: ?Sized + HasPinData; + + /// Type inference helper function. + fn make_closure<F, O, E>(self, f: F) -> F + where + F: FnOnce(*mut Self::Datee) -> Result<O, E>, + { + f + } +} + +/// This trait is automatically implemented for every type. It aims to provide the same type +/// inference help as `HasPinData`. +/// +/// # Safety +/// +/// Only the `init` module is allowed to use this trait. +pub unsafe trait HasInitData { + type InitData: InitData; + + unsafe fn __init_data() -> Self::InitData; +} + +/// Same function as `PinData`, but for arbitrary data. +/// +/// # Safety +/// +/// Only the `init` module is allowed to use this trait. +pub unsafe trait InitData: Copy { + type Datee: ?Sized + HasInitData; + + /// Type inference helper function. + fn make_closure<F, O, E>(self, f: F) -> F + where + F: FnOnce(*mut Self::Datee) -> Result<O, E>, + { + f + } +} + +pub struct AllData<T: ?Sized>(PhantomData<fn(Box<T>) -> Box<T>>); + +impl<T: ?Sized> Clone for AllData<T> { + fn clone(&self) -> Self { + *self + } +} + +impl<T: ?Sized> Copy for AllData<T> {} + +unsafe impl<T: ?Sized> InitData for AllData<T> { + type Datee = T; +} + +unsafe impl<T: ?Sized> HasInitData for T { + type InitData = AllData<T>; + + unsafe fn __init_data() -> Self::InitData { + AllData(PhantomData) + } +} + +/// Stack initializer helper type. Use [`stack_pin_init`] instead of this primitive. +/// +/// # Invariants +/// +/// If `self.is_init` is true, then `self.value` is initialized. +/// +/// [`stack_pin_init`]: kernel::stack_pin_init +pub struct StackInit<T> { + value: MaybeUninit<T>, + is_init: bool, +} + +impl<T> Drop for StackInit<T> { + #[inline] + fn drop(&mut self) { + if self.is_init { + // SAFETY: As we are being dropped, we only call this once. And since `self.is_init` is + // true, `self.value` is initialized. + unsafe { self.value.assume_init_drop() }; + } + } +} + +impl<T> StackInit<T> { + /// Creates a new [`StackInit<T>`] that is uninitialized. Use [`stack_pin_init`] instead of this + /// primitive. + /// + /// [`stack_pin_init`]: kernel::stack_pin_init + #[inline] + pub fn uninit() -> Self { + Self { + value: MaybeUninit::uninit(), + is_init: false, + } + } + + /// Initializes the contents and returns the result. + #[inline] + pub fn init<E>(self: Pin<&mut Self>, init: impl PinInit<T, E>) -> Result<Pin<&mut T>, E> { + // SAFETY: We never move out of `this`. + let this = unsafe { Pin::into_inner_unchecked(self) }; + // The value is currently initialized, so it needs to be dropped before we can reuse + // the memory (this is a safety guarantee of `Pin`). + if this.is_init { + this.is_init = false; + // SAFETY: `this.is_init` was true and therefore `this.value` is initialized. + unsafe { this.value.assume_init_drop() }; + } + // SAFETY: The memory slot is valid and this type ensures that it will stay pinned. + unsafe { init.__pinned_init(this.value.as_mut_ptr())? }; + // INVARIANT: `this.value` is initialized above. + this.is_init = true; + // SAFETY: The slot is now pinned, since we will never give access to `&mut T`. + Ok(unsafe { Pin::new_unchecked(this.value.assume_init_mut()) }) + } +} + +/// When a value of this type is dropped, it drops a `T`. +/// +/// Can be forgotten to prevent the drop. +pub struct DropGuard<T: ?Sized> { + ptr: *mut T, + do_drop: Cell<bool>, +} + +impl<T: ?Sized> DropGuard<T> { + /// Creates a new [`DropGuard<T>`]. It will [`ptr::drop_in_place`] `ptr` when it gets dropped. + /// + /// # Safety + /// + /// `ptr` must be a valid pointer. + /// + /// It is the callers responsibility that `self` will only get dropped if the pointee of `ptr`: + /// - has not been dropped, + /// - is not accessible by any other means, + /// - will not be dropped by any other means. + #[inline] + pub unsafe fn new(ptr: *mut T) -> Self { + Self { + ptr, + do_drop: Cell::new(true), + } + } + + /// Prevents this guard from dropping the supplied pointer. + /// + /// # Safety + /// + /// This function is unsafe in order to prevent safe code from forgetting this guard. It should + /// only be called by the macros in this module. + #[inline] + pub unsafe fn forget(&self) { + self.do_drop.set(false); + } +} + +impl<T: ?Sized> Drop for DropGuard<T> { + #[inline] + fn drop(&mut self) { + if self.do_drop.get() { + // SAFETY: A `DropGuard` can only be constructed using the unsafe `new` function + // ensuring that this operation is safe. + unsafe { ptr::drop_in_place(self.ptr) } + } + } +} + +/// Token used by `PinnedDrop` to prevent calling the function without creating this unsafely +/// created struct. This is needed, because the `drop` function is safe, but should not be called +/// manually. +pub struct OnlyCallFromDrop(()); + +impl OnlyCallFromDrop { + /// # Safety + /// + /// This function should only be called from the [`Drop::drop`] function and only be used to + /// delegate the destruction to the pinned destructor [`PinnedDrop::drop`] of the same type. + pub unsafe fn new() -> Self { + Self(()) + } +} diff --git a/rust/kernel/init/macros.rs b/rust/kernel/init/macros.rs new file mode 100644 index 000000000000..541cfad1d8be --- /dev/null +++ b/rust/kernel/init/macros.rs @@ -0,0 +1,971 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! This module provides the macros that actually implement the proc-macros `pin_data` and +//! `pinned_drop`. +//! +//! These macros should never be called directly, since they expect their input to be +//! in a certain format which is internal. Use the proc-macros instead. +//! +//! This architecture has been chosen because the kernel does not yet have access to `syn` which +//! would make matters a lot easier for implementing these as proc-macros. +//! +//! # Macro expansion example +//! +//! This section is intended for readers trying to understand the macros in this module and the +//! `pin_init!` macros from `init.rs`. +//! +//! We will look at the following example: +//! +//! ```rust +//! # use kernel::init::*; +//! #[pin_data] +//! #[repr(C)] +//! struct Bar<T> { +//! #[pin] +//! t: T, +//! pub x: usize, +//! } +//! +//! impl<T> Bar<T> { +//! fn new(t: T) -> impl PinInit<Self> { +//! pin_init!(Self { t, x: 0 }) +//! } +//! } +//! +//! #[pin_data(PinnedDrop)] +//! struct Foo { +//! a: usize, +//! #[pin] +//! b: Bar<u32>, +//! } +//! +//! #[pinned_drop] +//! impl PinnedDrop for Foo { +//! fn drop(self: Pin<&mut Self>) { +//! println!("{self:p} is getting dropped."); +//! } +//! } +//! +//! let a = 42; +//! let initializer = pin_init!(Foo { +//! a, +//! b <- Bar::new(36), +//! }); +//! ``` +//! +//! This example includes the most common and important features of the pin-init API. +//! +//! Below you can find individual section about the different macro invocations. Here are some +//! general things we need to take into account when designing macros: +//! - use global paths, similarly to file paths, these start with the separator: `::core::panic!()` +//! this ensures that the correct item is used, since users could define their own `mod core {}` +//! and then their own `panic!` inside to execute arbitrary code inside of our macro. +//! - macro `unsafe` hygiene: we need to ensure that we do not expand arbitrary, user-supplied +//! expressions inside of an `unsafe` block in the macro, because this would allow users to do +//! `unsafe` operations without an associated `unsafe` block. +//! +//! ## `#[pin_data]` on `Bar` +//! +//! This macro is used to specify which fields are structurally pinned and which fields are not. It +//! is placed on the struct definition and allows `#[pin]` to be placed on the fields. +//! +//! Here is the definition of `Bar` from our example: +//! +//! ```rust +//! # use kernel::init::*; +//! #[pin_data] +//! #[repr(C)] +//! struct Bar<T> { +//! t: T, +//! pub x: usize, +//! } +//! ``` +//! +//! This expands to the following code: +//! +//! ```rust +//! // Firstly the normal definition of the struct, attributes are preserved: +//! #[repr(C)] +//! struct Bar<T> { +//! t: T, +//! pub x: usize, +//! } +//! // Then an anonymous constant is defined, this is because we do not want any code to access the +//! // types that we define inside: +//! const _: () = { +//! // We define the pin-data carrying struct, it is a ZST and needs to have the same generics, +//! // since we need to implement access functions for each field and thus need to know its +//! // type. +//! struct __ThePinData<T> { +//! __phantom: ::core::marker::PhantomData<fn(Bar<T>) -> Bar<T>>, +//! } +//! // We implement `Copy` for the pin-data struct, since all functions it defines will take +//! // `self` by value. +//! impl<T> ::core::clone::Clone for __ThePinData<T> { +//! fn clone(&self) -> Self { +//! *self +//! } +//! } +//! impl<T> ::core::marker::Copy for __ThePinData<T> {} +//! // For every field of `Bar`, the pin-data struct will define a function with the same name +//! // and accessor (`pub` or `pub(crate)` etc.). This function will take a pointer to the +//! // field (`slot`) and a `PinInit` or `Init` depending on the projection kind of the field +//! // (if pinning is structural for the field, then `PinInit` otherwise `Init`). +//! #[allow(dead_code)] +//! impl<T> __ThePinData<T> { +//! unsafe fn t<E>( +//! self, +//! slot: *mut T, +//! init: impl ::kernel::init::Init<T, E>, +//! ) -> ::core::result::Result<(), E> { +//! unsafe { ::kernel::init::Init::__init(init, slot) } +//! } +//! pub unsafe fn x<E>( +//! self, +//! slot: *mut usize, +//! init: impl ::kernel::init::Init<usize, E>, +//! ) -> ::core::result::Result<(), E> { +//! unsafe { ::kernel::init::Init::__init(init, slot) } +//! } +//! } +//! // Implement the internal `HasPinData` trait that associates `Bar` with the pin-data struct +//! // that we constructed beforehand. +//! unsafe impl<T> ::kernel::init::__internal::HasPinData for Bar<T> { +//! type PinData = __ThePinData<T>; +//! unsafe fn __pin_data() -> Self::PinData { +//! __ThePinData { +//! __phantom: ::core::marker::PhantomData, +//! } +//! } +//! } +//! // Implement the internal `PinData` trait that marks the pin-data struct as a pin-data +//! // struct. This is important to ensure that no user can implement a rouge `__pin_data` +//! // function without using `unsafe`. +//! unsafe impl<T> ::kernel::init::__internal::PinData for __ThePinData<T> { +//! type Datee = Bar<T>; +//! } +//! // Now we only want to implement `Unpin` for `Bar` when every structurally pinned field is +//! // `Unpin`. In other words, whether `Bar` is `Unpin` only depends on structurally pinned +//! // fields (those marked with `#[pin]`). These fields will be listed in this struct, in our +//! // case no such fields exist, hence this is almost empty. The two phantomdata fields exist +//! // for two reasons: +//! // - `__phantom`: every generic must be used, since we cannot really know which generics +//! // are used, we declere all and then use everything here once. +//! // - `__phantom_pin`: uses the `'__pin` lifetime and ensures that this struct is invariant +//! // over it. The lifetime is needed to work around the limitation that trait bounds must +//! // not be trivial, e.g. the user has a `#[pin] PhantomPinned` field -- this is +//! // unconditionally `!Unpin` and results in an error. The lifetime tricks the compiler +//! // into accepting these bounds regardless. +//! #[allow(dead_code)] +//! struct __Unpin<'__pin, T> { +//! __phantom_pin: ::core::marker::PhantomData<fn(&'__pin ()) -> &'__pin ()>, +//! __phantom: ::core::marker::PhantomData<fn(Bar<T>) -> Bar<T>>, +//! } +//! #[doc(hidden)] +//! impl<'__pin, T> +//! ::core::marker::Unpin for Bar<T> where __Unpin<'__pin, T>: ::core::marker::Unpin {} +//! // Now we need to ensure that `Bar` does not implement `Drop`, since that would give users +//! // access to `&mut self` inside of `drop` even if the struct was pinned. This could lead to +//! // UB with only safe code, so we disallow this by giving a trait implementation error using +//! // a direct impl and a blanket implementation. +//! trait MustNotImplDrop {} +//! // Normally `Drop` bounds do not have the correct semantics, but for this purpose they do +//! // (normally people want to know if a type has any kind of drop glue at all, here we want +//! // to know if it has any kind of custom drop glue, which is exactly what this bound does). +//! #[allow(drop_bounds)] +//! impl<T: ::core::ops::Drop> MustNotImplDrop for T {} +//! impl<T> MustNotImplDrop for Bar<T> {} +//! // Here comes a convenience check, if one implemented `PinnedDrop`, but forgot to add it to +//! // `#[pin_data]`, then this will error with the same mechanic as above, this is not needed +//! // for safety, but a good sanity check, since no normal code calls `PinnedDrop::drop`. +//! #[allow(non_camel_case_types)] +//! trait UselessPinnedDropImpl_you_need_to_specify_PinnedDrop {} +//! impl<T: ::kernel::init::PinnedDrop> +//! UselessPinnedDropImpl_you_need_to_specify_PinnedDrop for T {} +//! impl<T> UselessPinnedDropImpl_you_need_to_specify_PinnedDrop for Bar<T> {} +//! }; +//! ``` +//! +//! ## `pin_init!` in `impl Bar` +//! +//! This macro creates an pin-initializer for the given struct. It requires that the struct is +//! annotated by `#[pin_data]`. +//! +//! Here is the impl on `Bar` defining the new function: +//! +//! ```rust +//! impl<T> Bar<T> { +//! fn new(t: T) -> impl PinInit<Self> { +//! pin_init!(Self { t, x: 0 }) +//! } +//! } +//! ``` +//! +//! This expands to the following code: +//! +//! ```rust +//! impl<T> Bar<T> { +//! fn new(t: T) -> impl PinInit<Self> { +//! { +//! // We do not want to allow arbitrary returns, so we declare this type as the `Ok` +//! // return type and shadow it later when we insert the arbitrary user code. That way +//! // there will be no possibility of returning without `unsafe`. +//! struct __InitOk; +//! // Get the pin-data type from the initialized type. +//! // - the function is unsafe, hence the unsafe block +//! // - we `use` the `HasPinData` trait in the block, it is only available in that +//! // scope. +//! let data = unsafe { +//! use ::kernel::init::__internal::HasPinData; +//! Self::__pin_data() +//! }; +//! // Use `data` to help with type inference, the closure supplied will have the type +//! // `FnOnce(*mut Self) -> Result<__InitOk, Infallible>`. +//! let init = ::kernel::init::__internal::PinData::make_closure::< +//! _, +//! __InitOk, +//! ::core::convert::Infallible, +//! >(data, move |slot| { +//! { +//! // Shadow the structure so it cannot be used to return early. If a user +//! // tries to write `return Ok(__InitOk)`, then they get a type error, since +//! // that will refer to this struct instead of the one defined above. +//! struct __InitOk; +//! // This is the expansion of `t,`, which is syntactic sugar for `t: t,`. +//! unsafe { ::core::ptr::write(&raw mut (*slot).t, t) }; +//! // Since initialization could fail later (not in this case, since the error +//! // type is `Infallible`) we will need to drop this field if it fails. This +//! // `DropGuard` will drop the field when it gets dropped and has not yet +//! // been forgotten. We make a reference to it, so users cannot `mem::forget` +//! // it from the initializer, since the name is the same as the field. +//! let t = &unsafe { +//! ::kernel::init::__internal::DropGuard::new(&raw mut (*slot).t) +//! }; +//! // Expansion of `x: 0,`: +//! // Since this can be an arbitrary expression we cannot place it inside of +//! // the `unsafe` block, so we bind it here. +//! let x = 0; +//! unsafe { ::core::ptr::write(&raw mut (*slot).x, x) }; +//! let x = &unsafe { +//! ::kernel::init::__internal::DropGuard::new(&raw mut (*slot).x) +//! }; +//! +//! // Here we use the type checker to ensuer that every field has been +//! // initialized exactly once, since this is `if false` it will never get +//! // executed, but still type-checked. +//! // Additionally we abuse `slot` to automatically infer the correct type for +//! // the struct. This is also another check that every field is accessible +//! // from this scope. +//! #[allow(unreachable_code, clippy::diverging_sub_expression)] +//! if false { +//! unsafe { +//! ::core::ptr::write( +//! slot, +//! Self { +//! // We only care about typecheck finding every field here, +//! // the expression does not matter, just conjure one using +//! // `panic!()`: +//! t: ::core::panic!(), +//! x: ::core::panic!(), +//! }, +//! ); +//! }; +//! } +//! // Since initialization has successfully completed, we can now forget the +//! // guards. +//! unsafe { ::kernel::init::__internal::DropGuard::forget(t) }; +//! unsafe { ::kernel::init::__internal::DropGuard::forget(x) }; +//! } +//! // We leave the scope above and gain access to the previously shadowed +//! // `__InitOk` that we need to return. +//! Ok(__InitOk) +//! }); +//! // Change the return type of the closure. +//! let init = move |slot| -> ::core::result::Result<(), ::core::convert::Infallible> { +//! init(slot).map(|__InitOk| ()) +//! }; +//! // Construct the initializer. +//! let init = unsafe { +//! ::kernel::init::pin_init_from_closure::<_, ::core::convert::Infallible>(init) +//! }; +//! init +//! } +//! } +//! } +//! ``` +//! +//! ## `#[pin_data]` on `Foo` +//! +//! Since we already took a look at `#[pin_data]` on `Bar`, this section will only explain the +//! differences/new things in the expansion of the `Foo` definition: +//! +//! ```rust +//! #[pin_data(PinnedDrop)] +//! struct Foo { +//! a: usize, +//! #[pin] +//! b: Bar<u32>, +//! } +//! ``` +//! +//! This expands to the following code: +//! +//! ```rust +//! struct Foo { +//! a: usize, +//! b: Bar<u32>, +//! } +//! const _: () = { +//! struct __ThePinData { +//! __phantom: ::core::marker::PhantomData<fn(Foo) -> Foo>, +//! } +//! impl ::core::clone::Clone for __ThePinData { +//! fn clone(&self) -> Self { +//! *self +//! } +//! } +//! impl ::core::marker::Copy for __ThePinData {} +//! #[allow(dead_code)] +//! impl __ThePinData { +//! unsafe fn b<E>( +//! self, +//! slot: *mut Bar<u32>, +//! // Note that this is `PinInit` instead of `Init`, this is because `b` is +//! // structurally pinned, as marked by the `#[pin]` attribute. +//! init: impl ::kernel::init::PinInit<Bar<u32>, E>, +//! ) -> ::core::result::Result<(), E> { +//! unsafe { ::kernel::init::PinInit::__pinned_init(init, slot) } +//! } +//! unsafe fn a<E>( +//! self, +//! slot: *mut usize, +//! init: impl ::kernel::init::Init<usize, E>, +//! ) -> ::core::result::Result<(), E> { +//! unsafe { ::kernel::init::Init::__init(init, slot) } +//! } +//! } +//! unsafe impl ::kernel::init::__internal::HasPinData for Foo { +//! type PinData = __ThePinData; +//! unsafe fn __pin_data() -> Self::PinData { +//! __ThePinData { +//! __phantom: ::core::marker::PhantomData, +//! } +//! } +//! } +//! unsafe impl ::kernel::init::__internal::PinData for __ThePinData { +//! type Datee = Foo; +//! } +//! #[allow(dead_code)] +//! struct __Unpin<'__pin> { +//! __phantom_pin: ::core::marker::PhantomData<fn(&'__pin ()) -> &'__pin ()>, +//! __phantom: ::core::marker::PhantomData<fn(Foo) -> Foo>, +//! // Since this field is `#[pin]`, it is listed here. +//! b: Bar<u32>, +//! } +//! #[doc(hidden)] +//! impl<'__pin> ::core::marker::Unpin for Foo where __Unpin<'__pin>: ::core::marker::Unpin {} +//! // Since we specified `PinnedDrop` as the argument to `#[pin_data]`, we expect `Foo` to +//! // implement `PinnedDrop`. Thus we do not need to prevent `Drop` implementations like +//! // before, instead we implement it here and delegate to `PinnedDrop`. +//! impl ::core::ops::Drop for Foo { +//! fn drop(&mut self) { +//! // Since we are getting dropped, no one else has a reference to `self` and thus we +//! // can assume that we never move. +//! let pinned = unsafe { ::core::pin::Pin::new_unchecked(self) }; +//! // Create the unsafe token that proves that we are inside of a destructor, this +//! // type is only allowed to be created in a destructor. +//! let token = unsafe { ::kernel::init::__internal::OnlyCallFromDrop::new() }; +//! ::kernel::init::PinnedDrop::drop(pinned, token); +//! } +//! } +//! }; +//! ``` +//! +//! ## `#[pinned_drop]` on `impl PinnedDrop for Foo` +//! +//! This macro is used to implement the `PinnedDrop` trait, since that trait is `unsafe` and has an +//! extra parameter that should not be used at all. The macro hides that parameter. +//! +//! Here is the `PinnedDrop` impl for `Foo`: +//! +//! ```rust +//! #[pinned_drop] +//! impl PinnedDrop for Foo { +//! fn drop(self: Pin<&mut Self>) { +//! println!("{self:p} is getting dropped."); +//! } +//! } +//! ``` +//! +//! This expands to the following code: +//! +//! ```rust +//! // `unsafe`, full path and the token parameter are added, everything else stays the same. +//! unsafe impl ::kernel::init::PinnedDrop for Foo { +//! fn drop(self: Pin<&mut Self>, _: ::kernel::init::__internal::OnlyCallFromDrop) { +//! println!("{self:p} is getting dropped."); +//! } +//! } +//! ``` +//! +//! ## `pin_init!` on `Foo` +//! +//! Since we already took a look at `pin_init!` on `Bar`, this section will only explain the +//! differences/new things in the expansion of `pin_init!` on `Foo`: +//! +//! ```rust +//! let a = 42; +//! let initializer = pin_init!(Foo { +//! a, +//! b <- Bar::new(36), +//! }); +//! ``` +//! +//! This expands to the following code: +//! +//! ```rust +//! let a = 42; +//! let initializer = { +//! struct __InitOk; +//! let data = unsafe { +//! use ::kernel::init::__internal::HasPinData; +//! Foo::__pin_data() +//! }; +//! let init = ::kernel::init::__internal::PinData::make_closure::< +//! _, +//! __InitOk, +//! ::core::convert::Infallible, +//! >(data, move |slot| { +//! { +//! struct __InitOk; +//! unsafe { ::core::ptr::write(&raw mut (*slot).a, a) }; +//! let a = &unsafe { ::kernel::init::__internal::DropGuard::new(&raw mut (*slot).a) }; +//! let b = Bar::new(36); +//! // Here we use `data` to access the correct field and require that `b` is of type +//! // `PinInit<Bar<u32>, Infallible>`. +//! unsafe { data.b(&raw mut (*slot).b, b)? }; +//! let b = &unsafe { ::kernel::init::__internal::DropGuard::new(&raw mut (*slot).b) }; +//! +//! #[allow(unreachable_code, clippy::diverging_sub_expression)] +//! if false { +//! unsafe { +//! ::core::ptr::write( +//! slot, +//! Foo { +//! a: ::core::panic!(), +//! b: ::core::panic!(), +//! }, +//! ); +//! }; +//! } +//! unsafe { ::kernel::init::__internal::DropGuard::forget(a) }; +//! unsafe { ::kernel::init::__internal::DropGuard::forget(b) }; +//! } +//! Ok(__InitOk) +//! }); +//! let init = move |slot| -> ::core::result::Result<(), ::core::convert::Infallible> { +//! init(slot).map(|__InitOk| ()) +//! }; +//! let init = unsafe { +//! ::kernel::init::pin_init_from_closure::<_, ::core::convert::Infallible>(init) +//! }; +//! init +//! }; +//! ``` + +/// Creates a `unsafe impl<...> PinnedDrop for $type` block. +/// +/// See [`PinnedDrop`] for more information. +#[doc(hidden)] +#[macro_export] +macro_rules! __pinned_drop { + ( + @impl_sig($($impl_sig:tt)*), + @impl_body( + $(#[$($attr:tt)*])* + fn drop($($sig:tt)*) { + $($inner:tt)* + } + ), + ) => { + unsafe $($impl_sig)* { + // Inherit all attributes and the type/ident tokens for the signature. + $(#[$($attr)*])* + fn drop($($sig)*, _: $crate::init::__internal::OnlyCallFromDrop) { + $($inner)* + } + } + } +} + +/// This macro first parses the struct definition such that it separates pinned and not pinned +/// fields. Afterwards it declares the struct and implement the `PinData` trait safely. +#[doc(hidden)] +#[macro_export] +macro_rules! __pin_data { + // Proc-macro entry point, this is supplied by the proc-macro pre-parsing. + (parse_input: + @args($($pinned_drop:ident)?), + @sig( + $(#[$($struct_attr:tt)*])* + $vis:vis struct $name:ident + $(where $($whr:tt)*)? + ), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @body({ $($fields:tt)* }), + ) => { + // We now use token munching to iterate through all of the fields. While doing this we + // identify fields marked with `#[pin]`, these fields are the 'pinned fields'. The user + // wants these to be structurally pinned. The rest of the fields are the + // 'not pinned fields'. Additionally we collect all fields, since we need them in the right + // order to declare the struct. + // + // In this call we also put some explaining comments for the parameters. + $crate::__pin_data!(find_pinned_fields: + // Attributes on the struct itself, these will just be propagated to be put onto the + // struct definition. + @struct_attrs($(#[$($struct_attr)*])*), + // The visibility of the struct. + @vis($vis), + // The name of the struct. + @name($name), + // The 'impl generics', the generics that will need to be specified on the struct inside + // of an `impl<$ty_generics>` block. + @impl_generics($($impl_generics)*), + // The 'ty generics', the generics that will need to be specified on the impl blocks. + @ty_generics($($ty_generics)*), + // The where clause of any impl block and the declaration. + @where($($($whr)*)?), + // The remaining fields tokens that need to be processed. + // We add a `,` at the end to ensure correct parsing. + @fields_munch($($fields)* ,), + // The pinned fields. + @pinned(), + // The not pinned fields. + @not_pinned(), + // All fields. + @fields(), + // The accumulator containing all attributes already parsed. + @accum(), + // Contains `yes` or `` to indicate if `#[pin]` was found on the current field. + @is_pinned(), + // The proc-macro argument, this should be `PinnedDrop` or ``. + @pinned_drop($($pinned_drop)?), + ); + }; + (find_pinned_fields: + @struct_attrs($($struct_attrs:tt)*), + @vis($vis:vis), + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + // We found a PhantomPinned field, this should generally be pinned! + @fields_munch($field:ident : $($($(::)?core::)?marker::)?PhantomPinned, $($rest:tt)*), + @pinned($($pinned:tt)*), + @not_pinned($($not_pinned:tt)*), + @fields($($fields:tt)*), + @accum($($accum:tt)*), + // This field is not pinned. + @is_pinned(), + @pinned_drop($($pinned_drop:ident)?), + ) => { + ::core::compile_error!(concat!( + "The field `", + stringify!($field), + "` of type `PhantomPinned` only has an effect, if it has the `#[pin]` attribute.", + )); + $crate::__pin_data!(find_pinned_fields: + @struct_attrs($($struct_attrs)*), + @vis($vis), + @name($name), + @impl_generics($($impl_generics)*), + @ty_generics($($ty_generics)*), + @where($($whr)*), + @fields_munch($($rest)*), + @pinned($($pinned)* $($accum)* $field: ::core::marker::PhantomPinned,), + @not_pinned($($not_pinned)*), + @fields($($fields)* $($accum)* $field: ::core::marker::PhantomPinned,), + @accum(), + @is_pinned(), + @pinned_drop($($pinned_drop)?), + ); + }; + (find_pinned_fields: + @struct_attrs($($struct_attrs:tt)*), + @vis($vis:vis), + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + // We reached the field declaration. + @fields_munch($field:ident : $type:ty, $($rest:tt)*), + @pinned($($pinned:tt)*), + @not_pinned($($not_pinned:tt)*), + @fields($($fields:tt)*), + @accum($($accum:tt)*), + // This field is pinned. + @is_pinned(yes), + @pinned_drop($($pinned_drop:ident)?), + ) => { + $crate::__pin_data!(find_pinned_fields: + @struct_attrs($($struct_attrs)*), + @vis($vis), + @name($name), + @impl_generics($($impl_generics)*), + @ty_generics($($ty_generics)*), + @where($($whr)*), + @fields_munch($($rest)*), + @pinned($($pinned)* $($accum)* $field: $type,), + @not_pinned($($not_pinned)*), + @fields($($fields)* $($accum)* $field: $type,), + @accum(), + @is_pinned(), + @pinned_drop($($pinned_drop)?), + ); + }; + (find_pinned_fields: + @struct_attrs($($struct_attrs:tt)*), + @vis($vis:vis), + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + // We reached the field declaration. + @fields_munch($field:ident : $type:ty, $($rest:tt)*), + @pinned($($pinned:tt)*), + @not_pinned($($not_pinned:tt)*), + @fields($($fields:tt)*), + @accum($($accum:tt)*), + // This field is not pinned. + @is_pinned(), + @pinned_drop($($pinned_drop:ident)?), + ) => { + $crate::__pin_data!(find_pinned_fields: + @struct_attrs($($struct_attrs)*), + @vis($vis), + @name($name), + @impl_generics($($impl_generics)*), + @ty_generics($($ty_generics)*), + @where($($whr)*), + @fields_munch($($rest)*), + @pinned($($pinned)*), + @not_pinned($($not_pinned)* $($accum)* $field: $type,), + @fields($($fields)* $($accum)* $field: $type,), + @accum(), + @is_pinned(), + @pinned_drop($($pinned_drop)?), + ); + }; + (find_pinned_fields: + @struct_attrs($($struct_attrs:tt)*), + @vis($vis:vis), + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + // We found the `#[pin]` attr. + @fields_munch(#[pin] $($rest:tt)*), + @pinned($($pinned:tt)*), + @not_pinned($($not_pinned:tt)*), + @fields($($fields:tt)*), + @accum($($accum:tt)*), + @is_pinned($($is_pinned:ident)?), + @pinned_drop($($pinned_drop:ident)?), + ) => { + $crate::__pin_data!(find_pinned_fields: + @struct_attrs($($struct_attrs)*), + @vis($vis), + @name($name), + @impl_generics($($impl_generics)*), + @ty_generics($($ty_generics)*), + @where($($whr)*), + @fields_munch($($rest)*), + // We do not include `#[pin]` in the list of attributes, since it is not actually an + // attribute that is defined somewhere. + @pinned($($pinned)*), + @not_pinned($($not_pinned)*), + @fields($($fields)*), + @accum($($accum)*), + // Set this to `yes`. + @is_pinned(yes), + @pinned_drop($($pinned_drop)?), + ); + }; + (find_pinned_fields: + @struct_attrs($($struct_attrs:tt)*), + @vis($vis:vis), + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + // We reached the field declaration with visibility, for simplicity we only munch the + // visibility and put it into `$accum`. + @fields_munch($fvis:vis $field:ident $($rest:tt)*), + @pinned($($pinned:tt)*), + @not_pinned($($not_pinned:tt)*), + @fields($($fields:tt)*), + @accum($($accum:tt)*), + @is_pinned($($is_pinned:ident)?), + @pinned_drop($($pinned_drop:ident)?), + ) => { + $crate::__pin_data!(find_pinned_fields: + @struct_attrs($($struct_attrs)*), + @vis($vis), + @name($name), + @impl_generics($($impl_generics)*), + @ty_generics($($ty_generics)*), + @where($($whr)*), + @fields_munch($field $($rest)*), + @pinned($($pinned)*), + @not_pinned($($not_pinned)*), + @fields($($fields)*), + @accum($($accum)* $fvis), + @is_pinned($($is_pinned)?), + @pinned_drop($($pinned_drop)?), + ); + }; + (find_pinned_fields: + @struct_attrs($($struct_attrs:tt)*), + @vis($vis:vis), + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + // Some other attribute, just put it into `$accum`. + @fields_munch(#[$($attr:tt)*] $($rest:tt)*), + @pinned($($pinned:tt)*), + @not_pinned($($not_pinned:tt)*), + @fields($($fields:tt)*), + @accum($($accum:tt)*), + @is_pinned($($is_pinned:ident)?), + @pinned_drop($($pinned_drop:ident)?), + ) => { + $crate::__pin_data!(find_pinned_fields: + @struct_attrs($($struct_attrs)*), + @vis($vis), + @name($name), + @impl_generics($($impl_generics)*), + @ty_generics($($ty_generics)*), + @where($($whr)*), + @fields_munch($($rest)*), + @pinned($($pinned)*), + @not_pinned($($not_pinned)*), + @fields($($fields)*), + @accum($($accum)* #[$($attr)*]), + @is_pinned($($is_pinned)?), + @pinned_drop($($pinned_drop)?), + ); + }; + (find_pinned_fields: + @struct_attrs($($struct_attrs:tt)*), + @vis($vis:vis), + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + // We reached the end of the fields, plus an optional additional comma, since we added one + // before and the user is also allowed to put a trailing comma. + @fields_munch($(,)?), + @pinned($($pinned:tt)*), + @not_pinned($($not_pinned:tt)*), + @fields($($fields:tt)*), + @accum(), + @is_pinned(), + @pinned_drop($($pinned_drop:ident)?), + ) => { + // Declare the struct with all fields in the correct order. + $($struct_attrs)* + $vis struct $name <$($impl_generics)*> + where $($whr)* + { + $($fields)* + } + + // We put the rest into this const item, because it then will not be accessible to anything + // outside. + const _: () = { + // We declare this struct which will host all of the projection function for our type. + // it will be invariant over all generic parameters which are inherited from the + // struct. + $vis struct __ThePinData<$($impl_generics)*> + where $($whr)* + { + __phantom: ::core::marker::PhantomData< + fn($name<$($ty_generics)*>) -> $name<$($ty_generics)*> + >, + } + + impl<$($impl_generics)*> ::core::clone::Clone for __ThePinData<$($ty_generics)*> + where $($whr)* + { + fn clone(&self) -> Self { *self } + } + + impl<$($impl_generics)*> ::core::marker::Copy for __ThePinData<$($ty_generics)*> + where $($whr)* + {} + + // Make all projection functions. + $crate::__pin_data!(make_pin_data: + @pin_data(__ThePinData), + @impl_generics($($impl_generics)*), + @ty_generics($($ty_generics)*), + @where($($whr)*), + @pinned($($pinned)*), + @not_pinned($($not_pinned)*), + ); + + // SAFETY: We have added the correct projection functions above to `__ThePinData` and + // we also use the least restrictive generics possible. + unsafe impl<$($impl_generics)*> + $crate::init::__internal::HasPinData for $name<$($ty_generics)*> + where $($whr)* + { + type PinData = __ThePinData<$($ty_generics)*>; + + unsafe fn __pin_data() -> Self::PinData { + __ThePinData { __phantom: ::core::marker::PhantomData } + } + } + + unsafe impl<$($impl_generics)*> + $crate::init::__internal::PinData for __ThePinData<$($ty_generics)*> + where $($whr)* + { + type Datee = $name<$($ty_generics)*>; + } + + // This struct will be used for the unpin analysis. Since only structurally pinned + // fields are relevant whether the struct should implement `Unpin`. + #[allow(dead_code)] + struct __Unpin <'__pin, $($impl_generics)*> + where $($whr)* + { + __phantom_pin: ::core::marker::PhantomData<fn(&'__pin ()) -> &'__pin ()>, + __phantom: ::core::marker::PhantomData< + fn($name<$($ty_generics)*>) -> $name<$($ty_generics)*> + >, + // Only the pinned fields. + $($pinned)* + } + + #[doc(hidden)] + impl<'__pin, $($impl_generics)*> ::core::marker::Unpin for $name<$($ty_generics)*> + where + __Unpin<'__pin, $($ty_generics)*>: ::core::marker::Unpin, + $($whr)* + {} + + // We need to disallow normal `Drop` implementation, the exact behavior depends on + // whether `PinnedDrop` was specified as the parameter. + $crate::__pin_data!(drop_prevention: + @name($name), + @impl_generics($($impl_generics)*), + @ty_generics($($ty_generics)*), + @where($($whr)*), + @pinned_drop($($pinned_drop)?), + ); + }; + }; + // When no `PinnedDrop` was specified, then we have to prevent implementing drop. + (drop_prevention: + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + @pinned_drop(), + ) => { + // We prevent this by creating a trait that will be implemented for all types implementing + // `Drop`. Additionally we will implement this trait for the struct leading to a conflict, + // if it also implements `Drop` + trait MustNotImplDrop {} + #[allow(drop_bounds)] + impl<T: ::core::ops::Drop> MustNotImplDrop for T {} + impl<$($impl_generics)*> MustNotImplDrop for $name<$($ty_generics)*> + where $($whr)* {} + // We also take care to prevent users from writing a useless `PinnedDrop` implementation. + // They might implement `PinnedDrop` correctly for the struct, but forget to give + // `PinnedDrop` as the parameter to `#[pin_data]`. + #[allow(non_camel_case_types)] + trait UselessPinnedDropImpl_you_need_to_specify_PinnedDrop {} + impl<T: $crate::init::PinnedDrop> + UselessPinnedDropImpl_you_need_to_specify_PinnedDrop for T {} + impl<$($impl_generics)*> + UselessPinnedDropImpl_you_need_to_specify_PinnedDrop for $name<$($ty_generics)*> + where $($whr)* {} + }; + // When `PinnedDrop` was specified we just implement `Drop` and delegate. + (drop_prevention: + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + @pinned_drop(PinnedDrop), + ) => { + impl<$($impl_generics)*> ::core::ops::Drop for $name<$($ty_generics)*> + where $($whr)* + { + fn drop(&mut self) { + // SAFETY: Since this is a destructor, `self` will not move after this function + // terminates, since it is inaccessible. + let pinned = unsafe { ::core::pin::Pin::new_unchecked(self) }; + // SAFETY: Since this is a drop function, we can create this token to call the + // pinned destructor of this type. + let token = unsafe { $crate::init::__internal::OnlyCallFromDrop::new() }; + $crate::init::PinnedDrop::drop(pinned, token); + } + } + }; + // If some other parameter was specified, we emit a readable error. + (drop_prevention: + @name($name:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + @pinned_drop($($rest:tt)*), + ) => { + compile_error!( + "Wrong parameters to `#[pin_data]`, expected nothing or `PinnedDrop`, got '{}'.", + stringify!($($rest)*), + ); + }; + (make_pin_data: + @pin_data($pin_data:ident), + @impl_generics($($impl_generics:tt)*), + @ty_generics($($ty_generics:tt)*), + @where($($whr:tt)*), + @pinned($($(#[$($p_attr:tt)*])* $pvis:vis $p_field:ident : $p_type:ty),* $(,)?), + @not_pinned($($(#[$($attr:tt)*])* $fvis:vis $field:ident : $type:ty),* $(,)?), + ) => { + // For every field, we create a projection function according to its projection type. If a + // field is structurally pinned, then it must be initialized via `PinInit`, if it is not + // structurally pinned, then it can be initialized via `Init`. + // + // The functions are `unsafe` to prevent accidentally calling them. + #[allow(dead_code)] + impl<$($impl_generics)*> $pin_data<$($ty_generics)*> + where $($whr)* + { + $( + $pvis unsafe fn $p_field<E>( + self, + slot: *mut $p_type, + init: impl $crate::init::PinInit<$p_type, E>, + ) -> ::core::result::Result<(), E> { + unsafe { $crate::init::PinInit::__pinned_init(init, slot) } + } + )* + $( + $fvis unsafe fn $field<E>( + self, + slot: *mut $type, + init: impl $crate::init::Init<$type, E>, + ) -> ::core::result::Result<(), E> { + unsafe { $crate::init::Init::__init(init, slot) } + } + )* + } + }; +} diff --git a/rust/kernel/ioctl.rs b/rust/kernel/ioctl.rs new file mode 100644 index 000000000000..c49e1a8d3fd0 --- /dev/null +++ b/rust/kernel/ioctl.rs @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 + +//! ioctl() number definitions +//! +//! C header: [`include/asm-generic/ioctl.h`](../../../../include/asm-generic/ioctl.h) + +#![allow(non_snake_case)] + +use crate::build_assert; + +/// Build an ioctl number, analogous to the C macro of the same name. +#[inline(always)] +const fn _IOC(dir: u32, ty: u32, nr: u32, size: usize) -> u32 { + build_assert!(dir <= uapi::_IOC_DIRMASK); + build_assert!(ty <= uapi::_IOC_TYPEMASK); + build_assert!(nr <= uapi::_IOC_NRMASK); + build_assert!(size <= (uapi::_IOC_SIZEMASK as usize)); + + (dir << uapi::_IOC_DIRSHIFT) + | (ty << uapi::_IOC_TYPESHIFT) + | (nr << uapi::_IOC_NRSHIFT) + | ((size as u32) << uapi::_IOC_SIZESHIFT) +} + +/// Build an ioctl number for an argumentless ioctl. +#[inline(always)] +pub const fn _IO(ty: u32, nr: u32) -> u32 { + _IOC(uapi::_IOC_NONE, ty, nr, 0) +} + +/// Build an ioctl number for an read-only ioctl. +#[inline(always)] +pub const fn _IOR<T>(ty: u32, nr: u32) -> u32 { + _IOC(uapi::_IOC_READ, ty, nr, core::mem::size_of::<T>()) +} + +/// Build an ioctl number for an write-only ioctl. +#[inline(always)] +pub const fn _IOW<T>(ty: u32, nr: u32) -> u32 { + _IOC(uapi::_IOC_WRITE, ty, nr, core::mem::size_of::<T>()) +} + +/// Build an ioctl number for a read-write ioctl. +#[inline(always)] +pub const fn _IOWR<T>(ty: u32, nr: u32) -> u32 { + _IOC( + uapi::_IOC_READ | uapi::_IOC_WRITE, + ty, + nr, + core::mem::size_of::<T>(), + ) +} + +/// Get the ioctl direction from an ioctl number. +pub const fn _IOC_DIR(nr: u32) -> u32 { + (nr >> uapi::_IOC_DIRSHIFT) & uapi::_IOC_DIRMASK +} + +/// Get the ioctl type from an ioctl number. +pub const fn _IOC_TYPE(nr: u32) -> u32 { + (nr >> uapi::_IOC_TYPESHIFT) & uapi::_IOC_TYPEMASK +} + +/// Get the ioctl number from an ioctl number. +pub const fn _IOC_NR(nr: u32) -> u32 { + (nr >> uapi::_IOC_NRSHIFT) & uapi::_IOC_NRMASK +} + +/// Get the ioctl size from an ioctl number. +pub const fn _IOC_SIZE(nr: u32) -> usize { + ((nr >> uapi::_IOC_SIZESHIFT) & uapi::_IOC_SIZEMASK) as usize +} diff --git a/rust/kernel/lib.rs b/rust/kernel/lib.rs index 223564f9f0cc..676995d4e460 100644 --- a/rust/kernel/lib.rs +++ b/rust/kernel/lib.rs @@ -16,7 +16,10 @@ #![feature(coerce_unsized)] #![feature(core_ffi_c)] #![feature(dispatch_from_dyn)] +#![feature(explicit_generic_args_with_impl_trait)] #![feature(generic_associated_types)] +#![feature(new_uninit)] +#![feature(pin_macro)] #![feature(receiver_trait)] #![feature(unsize)] @@ -25,11 +28,16 @@ #[cfg(not(CONFIG_RUST))] compile_error!("Missing kernel configuration for conditional compilation"); +// Allow proc-macros to refer to `::kernel` inside the `kernel` crate (this crate). +extern crate self as kernel; + #[cfg(not(test))] #[cfg(not(testlib))] mod allocator; mod build_assert; pub mod error; +pub mod init; +pub mod ioctl; pub mod prelude; pub mod print; mod static_assert; @@ -37,11 +45,13 @@ mod static_assert; pub mod std_vendor; pub mod str; pub mod sync; +pub mod task; pub mod types; #[doc(hidden)] pub use bindings; pub use macros; +pub use uapi; #[doc(hidden)] pub use build_error::build_error; diff --git a/rust/kernel/prelude.rs b/rust/kernel/prelude.rs index 0bc1c97e5604..c28587d68ebc 100644 --- a/rust/kernel/prelude.rs +++ b/rust/kernel/prelude.rs @@ -18,7 +18,7 @@ pub use core::pin::Pin; pub use alloc::{boxed::Box, vec::Vec}; #[doc(no_inline)] -pub use macros::{module, vtable}; +pub use macros::{module, pin_data, pinned_drop, vtable}; pub use super::build_assert; @@ -27,8 +27,14 @@ pub use super::build_assert; pub use super::dbg; pub use super::{pr_alert, pr_crit, pr_debug, pr_emerg, pr_err, pr_info, pr_notice, pr_warn}; +pub use super::{init, pin_init, try_init, try_pin_init}; + pub use super::static_assert; pub use super::error::{code::*, Error, Result}; pub use super::{str::CStr, ThisModule}; + +pub use super::init::{InPlaceInit, Init, PinInit}; + +pub use super::current; diff --git a/rust/kernel/sync.rs b/rust/kernel/sync.rs index 33da23e3076d..d219ee518eff 100644 --- a/rust/kernel/sync.rs +++ b/rust/kernel/sync.rs @@ -5,6 +5,56 @@ //! This module contains the kernel APIs related to synchronisation that have been ported or //! wrapped for usage by Rust code in the kernel. +use crate::types::Opaque; + mod arc; +mod condvar; +pub mod lock; +mod locked_by; pub use arc::{Arc, ArcBorrow, UniqueArc}; +pub use condvar::CondVar; +pub use lock::{mutex::Mutex, spinlock::SpinLock}; +pub use locked_by::LockedBy; + +/// Represents a lockdep class. It's a wrapper around C's `lock_class_key`. +#[repr(transparent)] +pub struct LockClassKey(Opaque<bindings::lock_class_key>); + +// SAFETY: `bindings::lock_class_key` is designed to be used concurrently from multiple threads and +// provides its own synchronization. +unsafe impl Sync for LockClassKey {} + +impl LockClassKey { + /// Creates a new lock class key. + pub const fn new() -> Self { + Self(Opaque::uninit()) + } + + pub(crate) fn as_ptr(&self) -> *mut bindings::lock_class_key { + self.0.get() + } +} + +/// Defines a new static lock class and returns a pointer to it. +#[doc(hidden)] +#[macro_export] +macro_rules! static_lock_class { + () => {{ + static CLASS: $crate::sync::LockClassKey = $crate::sync::LockClassKey::new(); + &CLASS + }}; +} + +/// Returns the given string, if one is provided, otherwise generates one based on the source code +/// location. +#[doc(hidden)] +#[macro_export] +macro_rules! optional_name { + () => { + $crate::c_str!(::core::concat!(::core::file!(), ":", ::core::line!())) + }; + ($name:literal) => { + $crate::c_str!($name) + }; +} diff --git a/rust/kernel/sync/arc.rs b/rust/kernel/sync/arc.rs index f2f1c83d72ba..e6d206242465 100644 --- a/rust/kernel/sync/arc.rs +++ b/rust/kernel/sync/arc.rs @@ -17,17 +17,24 @@ use crate::{ bindings, - error::Result, + error::{self, Error}, + init::{self, InPlaceInit, Init, PinInit}, + try_init, types::{ForeignOwnable, Opaque}, }; use alloc::boxed::Box; use core::{ + alloc::AllocError, + fmt, marker::{PhantomData, Unsize}, mem::{ManuallyDrop, MaybeUninit}, ops::{Deref, DerefMut}, pin::Pin, ptr::NonNull, }; +use macros::pin_data; + +mod std_vendor; /// A reference-counted pointer to an instance of `T`. /// @@ -120,6 +127,7 @@ pub struct Arc<T: ?Sized> { _p: PhantomData<ArcInner<T>>, } +#[pin_data] #[repr(C)] struct ArcInner<T: ?Sized> { refcount: Opaque<bindings::refcount_t>, @@ -149,7 +157,7 @@ unsafe impl<T: ?Sized + Sync + Send> Sync for Arc<T> {} impl<T> Arc<T> { /// Constructs a new reference counted instance of `T`. - pub fn try_new(contents: T) -> Result<Self> { + pub fn try_new(contents: T) -> Result<Self, AllocError> { // INVARIANT: The refcount is initialised to a non-zero value. let value = ArcInner { // SAFETY: There are no safety requirements for this FFI call. @@ -163,6 +171,28 @@ impl<T> Arc<T> { // `Arc` object. Ok(unsafe { Self::from_inner(Box::leak(inner).into()) }) } + + /// Use the given initializer to in-place initialize a `T`. + /// + /// If `T: !Unpin` it will not be able to move afterwards. + #[inline] + pub fn pin_init<E>(init: impl PinInit<T, E>) -> error::Result<Self> + where + Error: From<E>, + { + UniqueArc::pin_init(init).map(|u| u.into()) + } + + /// Use the given initializer to in-place initialize a `T`. + /// + /// This is equivalent to [`pin_init`], since an [`Arc`] is always pinned. + #[inline] + pub fn init<E>(init: impl Init<T, E>) -> error::Result<Self> + where + Error: From<E>, + { + UniqueArc::init(init).map(|u| u.into()) + } } impl<T: ?Sized> Arc<T> { @@ -469,7 +499,7 @@ pub struct UniqueArc<T: ?Sized> { impl<T> UniqueArc<T> { /// Tries to allocate a new [`UniqueArc`] instance. - pub fn try_new(value: T) -> Result<Self> { + pub fn try_new(value: T) -> Result<Self, AllocError> { Ok(Self { // INVARIANT: The newly-created object has a ref-count of 1. inner: Arc::try_new(value)?, @@ -477,10 +507,17 @@ impl<T> UniqueArc<T> { } /// Tries to allocate a new [`UniqueArc`] instance whose contents are not initialised yet. - pub fn try_new_uninit() -> Result<UniqueArc<MaybeUninit<T>>> { - Ok(UniqueArc::<MaybeUninit<T>> { + pub fn try_new_uninit() -> Result<UniqueArc<MaybeUninit<T>>, AllocError> { + // INVARIANT: The refcount is initialised to a non-zero value. + let inner = Box::try_init::<AllocError>(try_init!(ArcInner { + // SAFETY: There are no safety requirements for this FFI call. + refcount: Opaque::new(unsafe { bindings::REFCOUNT_INIT(1) }), + data <- init::uninit::<T, AllocError>(), + }? AllocError))?; + Ok(UniqueArc { // INVARIANT: The newly-created object has a ref-count of 1. - inner: Arc::try_new(MaybeUninit::uninit())?, + // SAFETY: The pointer from the `Box` is valid. + inner: unsafe { Arc::from_inner(Box::leak(inner).into()) }, }) } } @@ -489,6 +526,17 @@ impl<T> UniqueArc<MaybeUninit<T>> { /// Converts a `UniqueArc<MaybeUninit<T>>` into a `UniqueArc<T>` by writing a value into it. pub fn write(mut self, value: T) -> UniqueArc<T> { self.deref_mut().write(value); + // SAFETY: We just wrote the value to be initialized. + unsafe { self.assume_init() } + } + + /// Unsafely assume that `self` is initialized. + /// + /// # Safety + /// + /// The caller guarantees that the value behind this pointer has been initialized. It is + /// *immediate* UB to call this when the value is not initialized. + pub unsafe fn assume_init(self) -> UniqueArc<T> { let inner = ManuallyDrop::new(self).inner.ptr; UniqueArc { // SAFETY: The new `Arc` is taking over `ptr` from `self.inner` (which won't be @@ -496,6 +544,30 @@ impl<T> UniqueArc<MaybeUninit<T>> { inner: unsafe { Arc::from_inner(inner.cast()) }, } } + + /// Initialize `self` using the given initializer. + pub fn init_with<E>(mut self, init: impl Init<T, E>) -> core::result::Result<UniqueArc<T>, E> { + // SAFETY: The supplied pointer is valid for initialization. + match unsafe { init.__init(self.as_mut_ptr()) } { + // SAFETY: Initialization completed successfully. + Ok(()) => Ok(unsafe { self.assume_init() }), + Err(err) => Err(err), + } + } + + /// Pin-initialize `self` using the given pin-initializer. + pub fn pin_init_with<E>( + mut self, + init: impl PinInit<T, E>, + ) -> core::result::Result<Pin<UniqueArc<T>>, E> { + // SAFETY: The supplied pointer is valid for initialization and we will later pin the value + // to ensure it does not move. + match unsafe { init.__pinned_init(self.as_mut_ptr()) } { + // SAFETY: Initialization completed successfully. + Ok(()) => Ok(unsafe { self.assume_init() }.into()), + Err(err) => Err(err), + } + } } impl<T: ?Sized> From<UniqueArc<T>> for Pin<UniqueArc<T>> { @@ -522,3 +594,27 @@ impl<T: ?Sized> DerefMut for UniqueArc<T> { unsafe { &mut self.inner.ptr.as_mut().data } } } + +impl<T: fmt::Display + ?Sized> fmt::Display for UniqueArc<T> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + fmt::Display::fmt(self.deref(), f) + } +} + +impl<T: fmt::Display + ?Sized> fmt::Display for Arc<T> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + fmt::Display::fmt(self.deref(), f) + } +} + +impl<T: fmt::Debug + ?Sized> fmt::Debug for UniqueArc<T> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + fmt::Debug::fmt(self.deref(), f) + } +} + +impl<T: fmt::Debug + ?Sized> fmt::Debug for Arc<T> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + fmt::Debug::fmt(self.deref(), f) + } +} diff --git a/rust/kernel/sync/arc/std_vendor.rs b/rust/kernel/sync/arc/std_vendor.rs new file mode 100644 index 000000000000..a66a0c2831b3 --- /dev/null +++ b/rust/kernel/sync/arc/std_vendor.rs @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +//! The contents of this file come from the Rust standard library, hosted in +//! the <https://github.com/rust-lang/rust> repository, licensed under +//! "Apache-2.0 OR MIT" and adapted for kernel use. For copyright details, +//! see <https://github.com/rust-lang/rust/blob/master/COPYRIGHT>. + +use crate::sync::{arc::ArcInner, Arc}; +use core::any::Any; + +impl Arc<dyn Any + Send + Sync> { + /// Attempt to downcast the `Arc<dyn Any + Send + Sync>` to a concrete type. + pub fn downcast<T>(self) -> core::result::Result<Arc<T>, Self> + where + T: Any + Send + Sync, + { + if (*self).is::<T>() { + // SAFETY: We have just checked that the type is correct, so we can cast the pointer. + unsafe { + let ptr = self.ptr.cast::<ArcInner<T>>(); + core::mem::forget(self); + Ok(Arc::from_inner(ptr)) + } + } else { + Err(self) + } + } +} diff --git a/rust/kernel/sync/condvar.rs b/rust/kernel/sync/condvar.rs new file mode 100644 index 000000000000..ed353399c4e5 --- /dev/null +++ b/rust/kernel/sync/condvar.rs @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: GPL-2.0 + +//! A condition variable. +//! +//! This module allows Rust code to use the kernel's [`struct wait_queue_head`] as a condition +//! variable. + +use super::{lock::Backend, lock::Guard, LockClassKey}; +use crate::{bindings, init::PinInit, pin_init, str::CStr, types::Opaque}; +use core::marker::PhantomPinned; +use macros::pin_data; + +/// Creates a [`CondVar`] initialiser with the given name and a newly-created lock class. +#[macro_export] +macro_rules! new_condvar { + ($($name:literal)?) => { + $crate::sync::CondVar::new($crate::optional_name!($($name)?), $crate::static_lock_class!()) + }; +} + +/// A conditional variable. +/// +/// Exposes the kernel's [`struct wait_queue_head`] as a condition variable. It allows the caller to +/// atomically release the given lock and go to sleep. It reacquires the lock when it wakes up. And +/// it wakes up when notified by another thread (via [`CondVar::notify_one`] or +/// [`CondVar::notify_all`]) or because the thread received a signal. It may also wake up +/// spuriously. +/// +/// Instances of [`CondVar`] need a lock class and to be pinned. The recommended way to create such +/// instances is with the [`pin_init`](crate::pin_init) and [`new_condvar`] macros. +/// +/// # Examples +/// +/// The following is an example of using a condvar with a mutex: +/// +/// ``` +/// use kernel::sync::{CondVar, Mutex}; +/// use kernel::{new_condvar, new_mutex}; +/// +/// #[pin_data] +/// pub struct Example { +/// #[pin] +/// value: Mutex<u32>, +/// +/// #[pin] +/// value_changed: CondVar, +/// } +/// +/// /// Waits for `e.value` to become `v`. +/// fn wait_for_value(e: &Example, v: u32) { +/// let mut guard = e.value.lock(); +/// while *guard != v { +/// e.value_changed.wait_uninterruptible(&mut guard); +/// } +/// } +/// +/// /// Increments `e.value` and notifies all potential waiters. +/// fn increment(e: &Example) { +/// *e.value.lock() += 1; +/// e.value_changed.notify_all(); +/// } +/// +/// /// Allocates a new boxed `Example`. +/// fn new_example() -> Result<Pin<Box<Example>>> { +/// Box::pin_init(pin_init!(Example { +/// value <- new_mutex!(0), +/// value_changed <- new_condvar!(), +/// })) +/// } +/// ``` +/// +/// [`struct wait_queue_head`]: ../../../include/linux/wait.h +#[pin_data] +pub struct CondVar { + #[pin] + pub(crate) wait_list: Opaque<bindings::wait_queue_head>, + + /// A condvar needs to be pinned because it contains a [`struct list_head`] that is + /// self-referential, so it cannot be safely moved once it is initialised. + #[pin] + _pin: PhantomPinned, +} + +// SAFETY: `CondVar` only uses a `struct wait_queue_head`, which is safe to use on any thread. +#[allow(clippy::non_send_fields_in_send_ty)] +unsafe impl Send for CondVar {} + +// SAFETY: `CondVar` only uses a `struct wait_queue_head`, which is safe to use on multiple threads +// concurrently. +unsafe impl Sync for CondVar {} + +impl CondVar { + /// Constructs a new condvar initialiser. + #[allow(clippy::new_ret_no_self)] + pub fn new(name: &'static CStr, key: &'static LockClassKey) -> impl PinInit<Self> { + pin_init!(Self { + _pin: PhantomPinned, + // SAFETY: `slot` is valid while the closure is called and both `name` and `key` have + // static lifetimes so they live indefinitely. + wait_list <- Opaque::ffi_init(|slot| unsafe { + bindings::__init_waitqueue_head(slot, name.as_char_ptr(), key.as_ptr()) + }), + }) + } + + fn wait_internal<T: ?Sized, B: Backend>(&self, wait_state: u32, guard: &mut Guard<'_, T, B>) { + let wait = Opaque::<bindings::wait_queue_entry>::uninit(); + + // SAFETY: `wait` points to valid memory. + unsafe { bindings::init_wait(wait.get()) }; + + // SAFETY: Both `wait` and `wait_list` point to valid memory. + unsafe { + bindings::prepare_to_wait_exclusive(self.wait_list.get(), wait.get(), wait_state as _) + }; + + // SAFETY: No arguments, switches to another thread. + guard.do_unlocked(|| unsafe { bindings::schedule() }); + + // SAFETY: Both `wait` and `wait_list` point to valid memory. + unsafe { bindings::finish_wait(self.wait_list.get(), wait.get()) }; + } + + /// Releases the lock and waits for a notification in interruptible mode. + /// + /// Atomically releases the given lock (whose ownership is proven by the guard) and puts the + /// thread to sleep, reacquiring the lock on wake up. It wakes up when notified by + /// [`CondVar::notify_one`] or [`CondVar::notify_all`], or when the thread receives a signal. + /// It may also wake up spuriously. + /// + /// Returns whether there is a signal pending. + #[must_use = "wait returns if a signal is pending, so the caller must check the return value"] + pub fn wait<T: ?Sized, B: Backend>(&self, guard: &mut Guard<'_, T, B>) -> bool { + self.wait_internal(bindings::TASK_INTERRUPTIBLE, guard); + crate::current!().signal_pending() + } + + /// Releases the lock and waits for a notification in uninterruptible mode. + /// + /// Similar to [`CondVar::wait`], except that the wait is not interruptible. That is, the + /// thread won't wake up due to signals. It may, however, wake up supirously. + pub fn wait_uninterruptible<T: ?Sized, B: Backend>(&self, guard: &mut Guard<'_, T, B>) { + self.wait_internal(bindings::TASK_UNINTERRUPTIBLE, guard) + } + + /// Calls the kernel function to notify the appropriate number of threads with the given flags. + fn notify(&self, count: i32, flags: u32) { + // SAFETY: `wait_list` points to valid memory. + unsafe { + bindings::__wake_up( + self.wait_list.get(), + bindings::TASK_NORMAL, + count, + flags as _, + ) + }; + } + + /// Wakes a single waiter up, if any. + /// + /// This is not 'sticky' in the sense that if no thread is waiting, the notification is lost + /// completely (as opposed to automatically waking up the next waiter). + pub fn notify_one(&self) { + self.notify(1, 0); + } + + /// Wakes all waiters up, if any. + /// + /// This is not 'sticky' in the sense that if no thread is waiting, the notification is lost + /// completely (as opposed to automatically waking up the next waiter). + pub fn notify_all(&self) { + self.notify(0, 0); + } +} diff --git a/rust/kernel/sync/lock.rs b/rust/kernel/sync/lock.rs new file mode 100644 index 000000000000..a2216325632d --- /dev/null +++ b/rust/kernel/sync/lock.rs @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0 + +//! Generic kernel lock and guard. +//! +//! It contains a generic Rust lock and guard that allow for different backends (e.g., mutexes, +//! spinlocks, raw spinlocks) to be provided with minimal effort. + +use super::LockClassKey; +use crate::{bindings, init::PinInit, pin_init, str::CStr, types::Opaque, types::ScopeGuard}; +use core::{cell::UnsafeCell, marker::PhantomData, marker::PhantomPinned}; +use macros::pin_data; + +pub mod mutex; +pub mod spinlock; + +/// The "backend" of a lock. +/// +/// It is the actual implementation of the lock, without the need to repeat patterns used in all +/// locks. +/// +/// # Safety +/// +/// - Implementers must ensure that only one thread/CPU may access the protected data once the lock +/// is owned, that is, between calls to `lock` and `unlock`. +/// - Implementers must also ensure that `relock` uses the same locking method as the original +/// lock operation. +pub unsafe trait Backend { + /// The state required by the lock. + type State; + + /// The state required to be kept between lock and unlock. + type GuardState; + + /// Initialises the lock. + /// + /// # Safety + /// + /// `ptr` must be valid for write for the duration of the call, while `name` and `key` must + /// remain valid for read indefinitely. + unsafe fn init( + ptr: *mut Self::State, + name: *const core::ffi::c_char, + key: *mut bindings::lock_class_key, + ); + + /// Acquires the lock, making the caller its owner. + /// + /// # Safety + /// + /// Callers must ensure that [`Backend::init`] has been previously called. + #[must_use] + unsafe fn lock(ptr: *mut Self::State) -> Self::GuardState; + + /// Releases the lock, giving up its ownership. + /// + /// # Safety + /// + /// It must only be called by the current owner of the lock. + unsafe fn unlock(ptr: *mut Self::State, guard_state: &Self::GuardState); + + /// Reacquires the lock, making the caller its owner. + /// + /// # Safety + /// + /// Callers must ensure that `guard_state` comes from a previous call to [`Backend::lock`] (or + /// variant) that has been unlocked with [`Backend::unlock`] and will be relocked now. + unsafe fn relock(ptr: *mut Self::State, guard_state: &mut Self::GuardState) { + // SAFETY: The safety requirements ensure that the lock is initialised. + *guard_state = unsafe { Self::lock(ptr) }; + } +} + +/// A mutual exclusion primitive. +/// +/// Exposes one of the kernel locking primitives. Which one is exposed depends on the lock backend +/// specified as the generic parameter `B`. +#[pin_data] +pub struct Lock<T: ?Sized, B: Backend> { + /// The kernel lock object. + #[pin] + state: Opaque<B::State>, + + /// Some locks are known to be self-referential (e.g., mutexes), while others are architecture + /// or config defined (e.g., spinlocks). So we conservatively require them to be pinned in case + /// some architecture uses self-references now or in the future. + #[pin] + _pin: PhantomPinned, + + /// The data protected by the lock. + pub(crate) data: UnsafeCell<T>, +} + +// SAFETY: `Lock` can be transferred across thread boundaries iff the data it protects can. +unsafe impl<T: ?Sized + Send, B: Backend> Send for Lock<T, B> {} + +// SAFETY: `Lock` serialises the interior mutability it provides, so it is `Sync` as long as the +// data it protects is `Send`. +unsafe impl<T: ?Sized + Send, B: Backend> Sync for Lock<T, B> {} + +impl<T, B: Backend> Lock<T, B> { + /// Constructs a new lock initialiser. + #[allow(clippy::new_ret_no_self)] + pub fn new(t: T, name: &'static CStr, key: &'static LockClassKey) -> impl PinInit<Self> { + pin_init!(Self { + data: UnsafeCell::new(t), + _pin: PhantomPinned, + // SAFETY: `slot` is valid while the closure is called and both `name` and `key` have + // static lifetimes so they live indefinitely. + state <- Opaque::ffi_init(|slot| unsafe { + B::init(slot, name.as_char_ptr(), key.as_ptr()) + }), + }) + } +} + +impl<T: ?Sized, B: Backend> Lock<T, B> { + /// Acquires the lock and gives the caller access to the data protected by it. + pub fn lock(&self) -> Guard<'_, T, B> { + // SAFETY: The constructor of the type calls `init`, so the existence of the object proves + // that `init` was called. + let state = unsafe { B::lock(self.state.get()) }; + // SAFETY: The lock was just acquired. + unsafe { Guard::new(self, state) } + } +} + +/// A lock guard. +/// +/// Allows mutual exclusion primitives that implement the `Backend` trait to automatically unlock +/// when a guard goes out of scope. It also provides a safe and convenient way to access the data +/// protected by the lock. +#[must_use = "the lock unlocks immediately when the guard is unused"] +pub struct Guard<'a, T: ?Sized, B: Backend> { + pub(crate) lock: &'a Lock<T, B>, + pub(crate) state: B::GuardState, + _not_send: PhantomData<*mut ()>, +} + +// SAFETY: `Guard` is sync when the data protected by the lock is also sync. +unsafe impl<T: Sync + ?Sized, B: Backend> Sync for Guard<'_, T, B> {} + +impl<T: ?Sized, B: Backend> Guard<'_, T, B> { + pub(crate) fn do_unlocked(&mut self, cb: impl FnOnce()) { + // SAFETY: The caller owns the lock, so it is safe to unlock it. + unsafe { B::unlock(self.lock.state.get(), &self.state) }; + + // SAFETY: The lock was just unlocked above and is being relocked now. + let _relock = + ScopeGuard::new(|| unsafe { B::relock(self.lock.state.get(), &mut self.state) }); + + cb(); + } +} + +impl<T: ?Sized, B: Backend> core::ops::Deref for Guard<'_, T, B> { + type Target = T; + + fn deref(&self) -> &Self::Target { + // SAFETY: The caller owns the lock, so it is safe to deref the protected data. + unsafe { &*self.lock.data.get() } + } +} + +impl<T: ?Sized, B: Backend> core::ops::DerefMut for Guard<'_, T, B> { + fn deref_mut(&mut self) -> &mut Self::Target { + // SAFETY: The caller owns the lock, so it is safe to deref the protected data. + unsafe { &mut *self.lock.data.get() } + } +} + +impl<T: ?Sized, B: Backend> Drop for Guard<'_, T, B> { + fn drop(&mut self) { + // SAFETY: The caller owns the lock, so it is safe to unlock it. + unsafe { B::unlock(self.lock.state.get(), &self.state) }; + } +} + +impl<'a, T: ?Sized, B: Backend> Guard<'a, T, B> { + /// Constructs a new immutable lock guard. + /// + /// # Safety + /// + /// The caller must ensure that it owns the lock. + pub(crate) unsafe fn new(lock: &'a Lock<T, B>, state: B::GuardState) -> Self { + Self { + lock, + state, + _not_send: PhantomData, + } + } +} diff --git a/rust/kernel/sync/lock/mutex.rs b/rust/kernel/sync/lock/mutex.rs new file mode 100644 index 000000000000..923472f04af4 --- /dev/null +++ b/rust/kernel/sync/lock/mutex.rs @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: GPL-2.0 + +//! A kernel mutex. +//! +//! This module allows Rust code to use the kernel's `struct mutex`. + +use crate::bindings; + +/// Creates a [`Mutex`] initialiser with the given name and a newly-created lock class. +/// +/// It uses the name if one is given, otherwise it generates one based on the file name and line +/// number. +#[macro_export] +macro_rules! new_mutex { + ($inner:expr $(, $name:literal)? $(,)?) => { + $crate::sync::Mutex::new( + $inner, $crate::optional_name!($($name)?), $crate::static_lock_class!()) + }; +} + +/// A mutual exclusion primitive. +/// +/// Exposes the kernel's [`struct mutex`]. When multiple threads attempt to lock the same mutex, +/// only one at a time is allowed to progress, the others will block (sleep) until the mutex is +/// unlocked, at which point another thread will be allowed to wake up and make progress. +/// +/// Since it may block, [`Mutex`] needs to be used with care in atomic contexts. +/// +/// Instances of [`Mutex`] need a lock class and to be pinned. The recommended way to create such +/// instances is with the [`pin_init`](crate::pin_init) and [`new_mutex`] macros. +/// +/// # Examples +/// +/// The following example shows how to declare, allocate and initialise a struct (`Example`) that +/// contains an inner struct (`Inner`) that is protected by a mutex. +/// +/// ``` +/// use kernel::{init::InPlaceInit, init::PinInit, new_mutex, pin_init, sync::Mutex}; +/// +/// struct Inner { +/// a: u32, +/// b: u32, +/// } +/// +/// #[pin_data] +/// struct Example { +/// c: u32, +/// #[pin] +/// d: Mutex<Inner>, +/// } +/// +/// impl Example { +/// fn new() -> impl PinInit<Self> { +/// pin_init!(Self { +/// c: 10, +/// d <- new_mutex!(Inner { a: 20, b: 30 }), +/// }) +/// } +/// } +/// +/// // Allocate a boxed `Example`. +/// let e = Box::pin_init(Example::new())?; +/// assert_eq!(e.c, 10); +/// assert_eq!(e.d.lock().a, 20); +/// assert_eq!(e.d.lock().b, 30); +/// ``` +/// +/// The following example shows how to use interior mutability to modify the contents of a struct +/// protected by a mutex despite only having a shared reference: +/// +/// ``` +/// use kernel::sync::Mutex; +/// +/// struct Example { +/// a: u32, +/// b: u32, +/// } +/// +/// fn example(m: &Mutex<Example>) { +/// let mut guard = m.lock(); +/// guard.a += 10; +/// guard.b += 20; +/// } +/// ``` +/// +/// [`struct mutex`]: ../../../../include/linux/mutex.h +pub type Mutex<T> = super::Lock<T, MutexBackend>; + +/// A kernel `struct mutex` lock backend. +pub struct MutexBackend; + +// SAFETY: The underlying kernel `struct mutex` object ensures mutual exclusion. +unsafe impl super::Backend for MutexBackend { + type State = bindings::mutex; + type GuardState = (); + + unsafe fn init( + ptr: *mut Self::State, + name: *const core::ffi::c_char, + key: *mut bindings::lock_class_key, + ) { + // SAFETY: The safety requirements ensure that `ptr` is valid for writes, and `name` and + // `key` are valid for read indefinitely. + unsafe { bindings::__mutex_init(ptr, name, key) } + } + + unsafe fn lock(ptr: *mut Self::State) -> Self::GuardState { + // SAFETY: The safety requirements of this function ensure that `ptr` points to valid + // memory, and that it has been initialised before. + unsafe { bindings::mutex_lock(ptr) }; + } + + unsafe fn unlock(ptr: *mut Self::State, _guard_state: &Self::GuardState) { + // SAFETY: The safety requirements of this function ensure that `ptr` is valid and that the + // caller is the owner of the mutex. + unsafe { bindings::mutex_unlock(ptr) }; + } +} diff --git a/rust/kernel/sync/lock/spinlock.rs b/rust/kernel/sync/lock/spinlock.rs new file mode 100644 index 000000000000..979b56464a4e --- /dev/null +++ b/rust/kernel/sync/lock/spinlock.rs @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0 + +//! A kernel spinlock. +//! +//! This module allows Rust code to use the kernel's `spinlock_t`. + +use crate::bindings; + +/// Creates a [`SpinLock`] initialiser with the given name and a newly-created lock class. +/// +/// It uses the name if one is given, otherwise it generates one based on the file name and line +/// number. +#[macro_export] +macro_rules! new_spinlock { + ($inner:expr $(, $name:literal)? $(,)?) => { + $crate::sync::SpinLock::new( + $inner, $crate::optional_name!($($name)?), $crate::static_lock_class!()) + }; +} + +/// A spinlock. +/// +/// Exposes the kernel's [`spinlock_t`]. When multiple CPUs attempt to lock the same spinlock, only +/// one at a time is allowed to progress, the others will block (spinning) until the spinlock is +/// unlocked, at which point another CPU will be allowed to make progress. +/// +/// Instances of [`SpinLock`] need a lock class and to be pinned. The recommended way to create such +/// instances is with the [`pin_init`](crate::pin_init) and [`new_spinlock`] macros. +/// +/// # Examples +/// +/// The following example shows how to declare, allocate and initialise a struct (`Example`) that +/// contains an inner struct (`Inner`) that is protected by a spinlock. +/// +/// ``` +/// use kernel::{init::InPlaceInit, init::PinInit, new_spinlock, pin_init, sync::SpinLock}; +/// +/// struct Inner { +/// a: u32, +/// b: u32, +/// } +/// +/// #[pin_data] +/// struct Example { +/// c: u32, +/// #[pin] +/// d: SpinLock<Inner>, +/// } +/// +/// impl Example { +/// fn new() -> impl PinInit<Self> { +/// pin_init!(Self { +/// c: 10, +/// d <- new_spinlock!(Inner { a: 20, b: 30 }), +/// }) +/// } +/// } +/// +/// // Allocate a boxed `Example`. +/// let e = Box::pin_init(Example::new())?; +/// assert_eq!(e.c, 10); +/// assert_eq!(e.d.lock().a, 20); +/// assert_eq!(e.d.lock().b, 30); +/// ``` +/// +/// The following example shows how to use interior mutability to modify the contents of a struct +/// protected by a spinlock despite only having a shared reference: +/// +/// ``` +/// use kernel::sync::SpinLock; +/// +/// struct Example { +/// a: u32, +/// b: u32, +/// } +/// +/// fn example(m: &SpinLock<Example>) { +/// let mut guard = m.lock(); +/// guard.a += 10; +/// guard.b += 20; +/// } +/// ``` +/// +/// [`spinlock_t`]: ../../../../include/linux/spinlock.h +pub type SpinLock<T> = super::Lock<T, SpinLockBackend>; + +/// A kernel `spinlock_t` lock backend. +pub struct SpinLockBackend; + +// SAFETY: The underlying kernel `spinlock_t` object ensures mutual exclusion. `relock` uses the +// default implementation that always calls the same locking method. +unsafe impl super::Backend for SpinLockBackend { + type State = bindings::spinlock_t; + type GuardState = (); + + unsafe fn init( + ptr: *mut Self::State, + name: *const core::ffi::c_char, + key: *mut bindings::lock_class_key, + ) { + // SAFETY: The safety requirements ensure that `ptr` is valid for writes, and `name` and + // `key` are valid for read indefinitely. + unsafe { bindings::__spin_lock_init(ptr, name, key) } + } + + unsafe fn lock(ptr: *mut Self::State) -> Self::GuardState { + // SAFETY: The safety requirements of this function ensure that `ptr` points to valid + // memory, and that it has been initialised before. + unsafe { bindings::spin_lock(ptr) } + } + + unsafe fn unlock(ptr: *mut Self::State, _guard_state: &Self::GuardState) { + // SAFETY: The safety requirements of this function ensure that `ptr` is valid and that the + // caller is the owner of the mutex. + unsafe { bindings::spin_unlock(ptr) } + } +} diff --git a/rust/kernel/sync/locked_by.rs b/rust/kernel/sync/locked_by.rs new file mode 100644 index 000000000000..b17ee5cd98f3 --- /dev/null +++ b/rust/kernel/sync/locked_by.rs @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0 + +//! A wrapper for data protected by a lock that does not wrap it. + +use super::{lock::Backend, lock::Lock}; +use crate::build_assert; +use core::{cell::UnsafeCell, mem::size_of, ptr}; + +/// Allows access to some data to be serialised by a lock that does not wrap it. +/// +/// In most cases, data protected by a lock is wrapped by the appropriate lock type, e.g., +/// [`super::Mutex`] or [`super::SpinLock`]. [`LockedBy`] is meant for cases when this is not +/// possible. For example, if a container has a lock and some data in the contained elements needs +/// to be protected by the same lock. +/// +/// [`LockedBy`] wraps the data in lieu of another locking primitive, and only allows access to it +/// when the caller shows evidence that the 'external' lock is locked. It panics if the evidence +/// refers to the wrong instance of the lock. +/// +/// # Examples +/// +/// The following is an example for illustrative purposes: `InnerDirectory::bytes_used` is an +/// aggregate of all `InnerFile::bytes_used` and must be kept consistent; so we wrap `InnerFile` in +/// a `LockedBy` so that it shares a lock with `InnerDirectory`. This allows us to enforce at +/// compile-time that access to `InnerFile` is only granted when an `InnerDirectory` is also +/// locked; we enforce at run time that the right `InnerDirectory` is locked. +/// +/// ``` +/// use kernel::sync::{LockedBy, Mutex}; +/// +/// struct InnerFile { +/// bytes_used: u64, +/// } +/// +/// struct File { +/// _ino: u32, +/// inner: LockedBy<InnerFile, InnerDirectory>, +/// } +/// +/// struct InnerDirectory { +/// /// The sum of the bytes used by all files. +/// bytes_used: u64, +/// _files: Vec<File>, +/// } +/// +/// struct Directory { +/// _ino: u32, +/// inner: Mutex<InnerDirectory>, +/// } +/// +/// /// Prints `bytes_used` from both the directory and file. +/// fn print_bytes_used(dir: &Directory, file: &File) { +/// let guard = dir.inner.lock(); +/// let inner_file = file.inner.access(&guard); +/// pr_info!("{} {}", guard.bytes_used, inner_file.bytes_used); +/// } +/// +/// /// Increments `bytes_used` for both the directory and file. +/// fn inc_bytes_used(dir: &Directory, file: &File) { +/// let mut guard = dir.inner.lock(); +/// guard.bytes_used += 10; +/// +/// let file_inner = file.inner.access_mut(&mut guard); +/// file_inner.bytes_used += 10; +/// } +/// +/// /// Creates a new file. +/// fn new_file(ino: u32, dir: &Directory) -> File { +/// File { +/// _ino: ino, +/// inner: LockedBy::new(&dir.inner, InnerFile { bytes_used: 0 }), +/// } +/// } +/// ``` +pub struct LockedBy<T: ?Sized, U: ?Sized> { + owner: *const U, + data: UnsafeCell<T>, +} + +// SAFETY: `LockedBy` can be transferred across thread boundaries iff the data it protects can. +unsafe impl<T: ?Sized + Send, U: ?Sized> Send for LockedBy<T, U> {} + +// SAFETY: `LockedBy` serialises the interior mutability it provides, so it is `Sync` as long as the +// data it protects is `Send`. +unsafe impl<T: ?Sized + Send, U: ?Sized> Sync for LockedBy<T, U> {} + +impl<T, U> LockedBy<T, U> { + /// Constructs a new instance of [`LockedBy`]. + /// + /// It stores a raw pointer to the owner that is never dereferenced. It is only used to ensure + /// that the right owner is being used to access the protected data. If the owner is freed, the + /// data becomes inaccessible; if another instance of the owner is allocated *on the same + /// memory location*, the data becomes accessible again: none of this affects memory safety + /// because in any case at most one thread (or CPU) can access the protected data at a time. + pub fn new<B: Backend>(owner: &Lock<U, B>, data: T) -> Self { + build_assert!( + size_of::<Lock<U, B>>() > 0, + "The lock type cannot be a ZST because it may be impossible to distinguish instances" + ); + Self { + owner: owner.data.get(), + data: UnsafeCell::new(data), + } + } +} + +impl<T: ?Sized, U> LockedBy<T, U> { + /// Returns a reference to the protected data when the caller provides evidence (via a + /// reference) that the owner is locked. + /// + /// `U` cannot be a zero-sized type (ZST) because there are ways to get an `&U` that matches + /// the data protected by the lock without actually holding it. + /// + /// # Panics + /// + /// Panics if `owner` is different from the data protected by the lock used in + /// [`new`](LockedBy::new). + pub fn access<'a>(&'a self, owner: &'a U) -> &'a T { + build_assert!( + size_of::<U>() > 0, + "`U` cannot be a ZST because `owner` wouldn't be unique" + ); + if !ptr::eq(owner, self.owner) { + panic!("mismatched owners"); + } + + // SAFETY: `owner` is evidence that the owner is locked. + unsafe { &*self.data.get() } + } + + /// Returns a mutable reference to the protected data when the caller provides evidence (via a + /// mutable owner) that the owner is locked mutably. + /// + /// `U` cannot be a zero-sized type (ZST) because there are ways to get an `&mut U` that + /// matches the data protected by the lock without actually holding it. + /// + /// Showing a mutable reference to the owner is sufficient because we know no other references + /// can exist to it. + /// + /// # Panics + /// + /// Panics if `owner` is different from the data protected by the lock used in + /// [`new`](LockedBy::new). + pub fn access_mut<'a>(&'a self, owner: &'a mut U) -> &'a mut T { + build_assert!( + size_of::<U>() > 0, + "`U` cannot be a ZST because `owner` wouldn't be unique" + ); + if !ptr::eq(owner, self.owner) { + panic!("mismatched owners"); + } + + // SAFETY: `owner` is evidence that there is only one reference to the owner. + unsafe { &mut *self.data.get() } + } +} diff --git a/rust/kernel/task.rs b/rust/kernel/task.rs new file mode 100644 index 000000000000..526d29a0ae27 --- /dev/null +++ b/rust/kernel/task.rs @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0 + +//! Tasks (threads and processes). +//! +//! C header: [`include/linux/sched.h`](../../../../include/linux/sched.h). + +use crate::{bindings, types::Opaque}; +use core::{marker::PhantomData, ops::Deref, ptr}; + +/// Returns the currently running task. +#[macro_export] +macro_rules! current { + () => { + // SAFETY: Deref + addr-of below create a temporary `TaskRef` that cannot outlive the + // caller. + unsafe { &*$crate::task::Task::current() } + }; +} + +/// Wraps the kernel's `struct task_struct`. +/// +/// # Invariants +/// +/// All instances are valid tasks created by the C portion of the kernel. +/// +/// Instances of this type are always ref-counted, that is, a call to `get_task_struct` ensures +/// that the allocation remains valid at least until the matching call to `put_task_struct`. +/// +/// # Examples +/// +/// The following is an example of getting the PID of the current thread with zero additional cost +/// when compared to the C version: +/// +/// ``` +/// let pid = current!().pid(); +/// ``` +/// +/// Getting the PID of the current process, also zero additional cost: +/// +/// ``` +/// let pid = current!().group_leader().pid(); +/// ``` +/// +/// Getting the current task and storing it in some struct. The reference count is automatically +/// incremented when creating `State` and decremented when it is dropped: +/// +/// ``` +/// use kernel::{task::Task, types::ARef}; +/// +/// struct State { +/// creator: ARef<Task>, +/// index: u32, +/// } +/// +/// impl State { +/// fn new() -> Self { +/// Self { +/// creator: current!().into(), +/// index: 0, +/// } +/// } +/// } +/// ``` +#[repr(transparent)] +pub struct Task(pub(crate) Opaque<bindings::task_struct>); + +// SAFETY: It's OK to access `Task` through references from other threads because we're either +// accessing properties that don't change (e.g., `pid`, `group_leader`) or that are properly +// synchronised by C code (e.g., `signal_pending`). +unsafe impl Sync for Task {} + +/// The type of process identifiers (PIDs). +type Pid = bindings::pid_t; + +impl Task { + /// Returns a task reference for the currently executing task/thread. + /// + /// The recommended way to get the current task/thread is to use the + /// [`current`](crate::current) macro because it is safe. + /// + /// # Safety + /// + /// Callers must ensure that the returned object doesn't outlive the current task/thread. + pub unsafe fn current() -> impl Deref<Target = Task> { + struct TaskRef<'a> { + task: &'a Task, + _not_send: PhantomData<*mut ()>, + } + + impl Deref for TaskRef<'_> { + type Target = Task; + + fn deref(&self) -> &Self::Target { + self.task + } + } + + // SAFETY: Just an FFI call with no additional safety requirements. + let ptr = unsafe { bindings::get_current() }; + + TaskRef { + // SAFETY: If the current thread is still running, the current task is valid. Given + // that `TaskRef` is not `Send`, we know it cannot be transferred to another thread + // (where it could potentially outlive the caller). + task: unsafe { &*ptr.cast() }, + _not_send: PhantomData, + } + } + + /// Returns the group leader of the given task. + pub fn group_leader(&self) -> &Task { + // SAFETY: By the type invariant, we know that `self.0` is a valid task. Valid tasks always + // have a valid group_leader. + let ptr = unsafe { *ptr::addr_of!((*self.0.get()).group_leader) }; + + // SAFETY: The lifetime of the returned task reference is tied to the lifetime of `self`, + // and given that a task has a reference to its group leader, we know it must be valid for + // the lifetime of the returned task reference. + unsafe { &*ptr.cast() } + } + + /// Returns the PID of the given task. + pub fn pid(&self) -> Pid { + // SAFETY: By the type invariant, we know that `self.0` is a valid task. Valid tasks always + // have a valid pid. + unsafe { *ptr::addr_of!((*self.0.get()).pid) } + } + + /// Determines whether the given task has pending signals. + pub fn signal_pending(&self) -> bool { + // SAFETY: By the type invariant, we know that `self.0` is valid. + unsafe { bindings::signal_pending(self.0.get()) != 0 } + } + + /// Wakes up the task. + pub fn wake_up(&self) { + // SAFETY: By the type invariant, we know that `self.0.get()` is non-null and valid. + // And `wake_up_process` is safe to be called for any valid task, even if the task is + // running. + unsafe { bindings::wake_up_process(self.0.get()) }; + } +} + +// SAFETY: The type invariants guarantee that `Task` is always ref-counted. +unsafe impl crate::types::AlwaysRefCounted for Task { + fn inc_ref(&self) { + // SAFETY: The existence of a shared reference means that the refcount is nonzero. + unsafe { bindings::get_task_struct(self.0.get()) }; + } + + unsafe fn dec_ref(obj: ptr::NonNull<Self>) { + // SAFETY: The safety requirements guarantee that the refcount is nonzero. + unsafe { bindings::put_task_struct(obj.cast().as_ptr()) } + } +} diff --git a/rust/kernel/types.rs b/rust/kernel/types.rs index 9d0fdbc55843..29db59d6119a 100644 --- a/rust/kernel/types.rs +++ b/rust/kernel/types.rs @@ -2,11 +2,14 @@ //! Kernel types. +use crate::init::{self, PinInit}; use alloc::boxed::Box; use core::{ cell::UnsafeCell, + marker::PhantomData, mem::MaybeUninit, ops::{Deref, DerefMut}, + ptr::NonNull, }; /// Used to transfer ownership to and from foreign (non-Rust) languages. @@ -234,10 +237,142 @@ impl<T> Opaque<T> { Self(MaybeUninit::uninit()) } + /// Creates a pin-initializer from the given initializer closure. + /// + /// The returned initializer calls the given closure with the pointer to the inner `T` of this + /// `Opaque`. Since this memory is uninitialized, the closure is not allowed to read from it. + /// + /// This function is safe, because the `T` inside of an `Opaque` is allowed to be + /// uninitialized. Additionally, access to the inner `T` requires `unsafe`, so the caller needs + /// to verify at that point that the inner value is valid. + pub fn ffi_init(init_func: impl FnOnce(*mut T)) -> impl PinInit<Self> { + // SAFETY: We contain a `MaybeUninit`, so it is OK for the `init_func` to not fully + // initialize the `T`. + unsafe { + init::pin_init_from_closure::<_, ::core::convert::Infallible>(move |slot| { + init_func(Self::raw_get(slot)); + Ok(()) + }) + } + } + /// Returns a raw pointer to the opaque data. pub fn get(&self) -> *mut T { UnsafeCell::raw_get(self.0.as_ptr()) } + + /// Gets the value behind `this`. + /// + /// This function is useful to get access to the value without creating intermediate + /// references. + pub const fn raw_get(this: *const Self) -> *mut T { + UnsafeCell::raw_get(this.cast::<UnsafeCell<T>>()) + } +} + +/// Types that are _always_ reference counted. +/// +/// It allows such types to define their own custom ref increment and decrement functions. +/// Additionally, it allows users to convert from a shared reference `&T` to an owned reference +/// [`ARef<T>`]. +/// +/// This is usually implemented by wrappers to existing structures on the C side of the code. For +/// Rust code, the recommendation is to use [`Arc`](crate::sync::Arc) to create reference-counted +/// instances of a type. +/// +/// # Safety +/// +/// Implementers must ensure that increments to the reference count keep the object alive in memory +/// at least until matching decrements are performed. +/// +/// Implementers must also ensure that all instances are reference-counted. (Otherwise they +/// won't be able to honour the requirement that [`AlwaysRefCounted::inc_ref`] keep the object +/// alive.) +pub unsafe trait AlwaysRefCounted { + /// Increments the reference count on the object. + fn inc_ref(&self); + + /// Decrements the reference count on the object. + /// + /// Frees the object when the count reaches zero. + /// + /// # Safety + /// + /// Callers must ensure that there was a previous matching increment to the reference count, + /// and that the object is no longer used after its reference count is decremented (as it may + /// result in the object being freed), unless the caller owns another increment on the refcount + /// (e.g., it calls [`AlwaysRefCounted::inc_ref`] twice, then calls + /// [`AlwaysRefCounted::dec_ref`] once). + unsafe fn dec_ref(obj: NonNull<Self>); +} + +/// An owned reference to an always-reference-counted object. +/// +/// The object's reference count is automatically decremented when an instance of [`ARef`] is +/// dropped. It is also automatically incremented when a new instance is created via +/// [`ARef::clone`]. +/// +/// # Invariants +/// +/// The pointer stored in `ptr` is non-null and valid for the lifetime of the [`ARef`] instance. In +/// particular, the [`ARef`] instance owns an increment on the underlying object's reference count. +pub struct ARef<T: AlwaysRefCounted> { + ptr: NonNull<T>, + _p: PhantomData<T>, +} + +impl<T: AlwaysRefCounted> ARef<T> { + /// Creates a new instance of [`ARef`]. + /// + /// It takes over an increment of the reference count on the underlying object. + /// + /// # Safety + /// + /// Callers must ensure that the reference count was incremented at least once, and that they + /// are properly relinquishing one increment. That is, if there is only one increment, callers + /// must not use the underlying object anymore -- it is only safe to do so via the newly + /// created [`ARef`]. + pub unsafe fn from_raw(ptr: NonNull<T>) -> Self { + // INVARIANT: The safety requirements guarantee that the new instance now owns the + // increment on the refcount. + Self { + ptr, + _p: PhantomData, + } + } +} + +impl<T: AlwaysRefCounted> Clone for ARef<T> { + fn clone(&self) -> Self { + self.inc_ref(); + // SAFETY: We just incremented the refcount above. + unsafe { Self::from_raw(self.ptr) } + } +} + +impl<T: AlwaysRefCounted> Deref for ARef<T> { + type Target = T; + + fn deref(&self) -> &Self::Target { + // SAFETY: The type invariants guarantee that the object is valid. + unsafe { self.ptr.as_ref() } + } +} + +impl<T: AlwaysRefCounted> From<&T> for ARef<T> { + fn from(b: &T) -> Self { + b.inc_ref(); + // SAFETY: We just incremented the refcount above. + unsafe { Self::from_raw(NonNull::from(b)) } + } +} + +impl<T: AlwaysRefCounted> Drop for ARef<T> { + fn drop(&mut self) { + // SAFETY: The type invariants guarantee that the `ARef` owns the reference we're about to + // decrement. + unsafe { T::dec_ref(self.ptr) }; + } } /// A sum type that always holds either a value of type `L` or `R`. diff --git a/rust/macros/helpers.rs b/rust/macros/helpers.rs index cf7ad950dc1e..b2bdd4d8c958 100644 --- a/rust/macros/helpers.rs +++ b/rust/macros/helpers.rs @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 -use proc_macro::{token_stream, TokenTree}; +use proc_macro::{token_stream, Group, TokenTree}; pub(crate) fn try_ident(it: &mut token_stream::IntoIter) -> Option<String> { if let Some(TokenTree::Ident(ident)) = it.next() { @@ -56,6 +56,14 @@ pub(crate) fn expect_string_ascii(it: &mut token_stream::IntoIter) -> String { string } +pub(crate) fn expect_group(it: &mut token_stream::IntoIter) -> Group { + if let TokenTree::Group(group) = it.next().expect("Reached end of token stream for Group") { + group + } else { + panic!("Expected Group"); + } +} + pub(crate) fn expect_end(it: &mut token_stream::IntoIter) { if it.next().is_some() { panic!("Expected end"); diff --git a/rust/macros/lib.rs b/rust/macros/lib.rs index c1d385e345b9..3fc74cb4ea19 100644 --- a/rust/macros/lib.rs +++ b/rust/macros/lib.rs @@ -2,9 +2,13 @@ //! Crate for all kernel procedural macros. +#[macro_use] +mod quote; mod concat_idents; mod helpers; mod module; +mod pin_data; +mod pinned_drop; mod vtable; use proc_macro::TokenStream; @@ -166,3 +170,79 @@ pub fn vtable(attr: TokenStream, ts: TokenStream) -> TokenStream { pub fn concat_idents(ts: TokenStream) -> TokenStream { concat_idents::concat_idents(ts) } + +/// Used to specify the pinning information of the fields of a struct. +/// +/// This is somewhat similar in purpose as +/// [pin-project-lite](https://crates.io/crates/pin-project-lite). +/// Place this macro on a struct definition and then `#[pin]` in front of the attributes of each +/// field you want to structurally pin. +/// +/// This macro enables the use of the [`pin_init!`] macro. When pin-initializing a `struct`, +/// then `#[pin]` directs the type of initializer that is required. +/// +/// If your `struct` implements `Drop`, then you need to add `PinnedDrop` as arguments to this +/// macro, and change your `Drop` implementation to `PinnedDrop` annotated with +/// `#[`[`macro@pinned_drop`]`]`, since dropping pinned values requires extra care. +/// +/// # Examples +/// +/// ```rust,ignore +/// #[pin_data] +/// struct DriverData { +/// #[pin] +/// queue: Mutex<Vec<Command>>, +/// buf: Box<[u8; 1024 * 1024]>, +/// } +/// ``` +/// +/// ```rust,ignore +/// #[pin_data(PinnedDrop)] +/// struct DriverData { +/// #[pin] +/// queue: Mutex<Vec<Command>>, +/// buf: Box<[u8; 1024 * 1024]>, +/// raw_info: *mut Info, +/// } +/// +/// #[pinned_drop] +/// impl PinnedDrop for DriverData { +/// fn drop(self: Pin<&mut Self>) { +/// unsafe { bindings::destroy_info(self.raw_info) }; +/// } +/// } +/// ``` +/// +/// [`pin_init!`]: ../kernel/macro.pin_init.html +// ^ cannot use direct link, since `kernel` is not a dependency of `macros`. +#[proc_macro_attribute] +pub fn pin_data(inner: TokenStream, item: TokenStream) -> TokenStream { + pin_data::pin_data(inner, item) +} + +/// Used to implement `PinnedDrop` safely. +/// +/// Only works on structs that are annotated via `#[`[`macro@pin_data`]`]`. +/// +/// # Examples +/// +/// ```rust,ignore +/// #[pin_data(PinnedDrop)] +/// struct DriverData { +/// #[pin] +/// queue: Mutex<Vec<Command>>, +/// buf: Box<[u8; 1024 * 1024]>, +/// raw_info: *mut Info, +/// } +/// +/// #[pinned_drop] +/// impl PinnedDrop for DriverData { +/// fn drop(self: Pin<&mut Self>) { +/// unsafe { bindings::destroy_info(self.raw_info) }; +/// } +/// } +/// ``` +#[proc_macro_attribute] +pub fn pinned_drop(args: TokenStream, input: TokenStream) -> TokenStream { + pinned_drop::pinned_drop(args, input) +} diff --git a/rust/macros/module.rs b/rust/macros/module.rs index a7e363c2b044..fb1244f8c2e6 100644 --- a/rust/macros/module.rs +++ b/rust/macros/module.rs @@ -1,9 +1,27 @@ // SPDX-License-Identifier: GPL-2.0 use crate::helpers::*; -use proc_macro::{token_stream, Literal, TokenStream, TokenTree}; +use proc_macro::{token_stream, Delimiter, Literal, TokenStream, TokenTree}; use std::fmt::Write; +fn expect_string_array(it: &mut token_stream::IntoIter) -> Vec<String> { + let group = expect_group(it); + assert_eq!(group.delimiter(), Delimiter::Bracket); + let mut values = Vec::new(); + let mut it = group.stream().into_iter(); + + while let Some(val) = try_string(&mut it) { + assert!(val.is_ascii(), "Expected ASCII string"); + values.push(val); + match it.next() { + Some(TokenTree::Punct(punct)) => assert_eq!(punct.as_char(), ','), + None => break, + _ => panic!("Expected ',' or end of array"), + } + } + values +} + struct ModInfoBuilder<'a> { module: &'a str, counter: usize, @@ -78,7 +96,7 @@ struct ModuleInfo { name: String, author: Option<String>, description: Option<String>, - alias: Option<String>, + alias: Option<Vec<String>>, } impl ModuleInfo { @@ -112,7 +130,7 @@ impl ModuleInfo { "author" => info.author = Some(expect_string(it)), "description" => info.description = Some(expect_string(it)), "license" => info.license = expect_string_ascii(it), - "alias" => info.alias = Some(expect_string_ascii(it)), + "alias" => info.alias = Some(expect_string_array(it)), _ => panic!( "Unknown key \"{}\". Valid keys are: {:?}.", key, EXPECTED_KEYS @@ -163,8 +181,10 @@ pub(crate) fn module(ts: TokenStream) -> TokenStream { modinfo.emit("description", &description); } modinfo.emit("license", &info.license); - if let Some(alias) = info.alias { - modinfo.emit("alias", &alias); + if let Some(aliases) = info.alias { + for alias in aliases { + modinfo.emit("alias", &alias); + } } // Built-in modules also export the `file` modinfo string. @@ -258,7 +278,7 @@ pub(crate) fn module(ts: TokenStream) -> TokenStream { return 0; }} Err(e) => {{ - return e.to_kernel_errno(); + return e.to_errno(); }} }} }} diff --git a/rust/macros/pin_data.rs b/rust/macros/pin_data.rs new file mode 100644 index 000000000000..954149d77181 --- /dev/null +++ b/rust/macros/pin_data.rs @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +use proc_macro::{Punct, Spacing, TokenStream, TokenTree}; + +pub(crate) fn pin_data(args: TokenStream, input: TokenStream) -> TokenStream { + // This proc-macro only does some pre-parsing and then delegates the actual parsing to + // `kernel::__pin_data!`. + // + // In here we only collect the generics, since parsing them in declarative macros is very + // elaborate. We also do not need to analyse their structure, we only need to collect them. + + // `impl_generics`, the declared generics with their bounds. + let mut impl_generics = vec![]; + // Only the names of the generics, without any bounds. + let mut ty_generics = vec![]; + // Tokens not related to the generics e.g. the `impl` token. + let mut rest = vec![]; + // The current level of `<`. + let mut nesting = 0; + let mut toks = input.into_iter(); + // If we are at the beginning of a generic parameter. + let mut at_start = true; + for tt in &mut toks { + match tt.clone() { + TokenTree::Punct(p) if p.as_char() == '<' => { + if nesting >= 1 { + impl_generics.push(tt); + } + nesting += 1; + } + TokenTree::Punct(p) if p.as_char() == '>' => { + if nesting == 0 { + break; + } else { + nesting -= 1; + if nesting >= 1 { + impl_generics.push(tt); + } + if nesting == 0 { + break; + } + } + } + tt => { + if nesting == 1 { + match &tt { + TokenTree::Ident(i) if i.to_string() == "const" => {} + TokenTree::Ident(_) if at_start => { + ty_generics.push(tt.clone()); + ty_generics.push(TokenTree::Punct(Punct::new(',', Spacing::Alone))); + at_start = false; + } + TokenTree::Punct(p) if p.as_char() == ',' => at_start = true, + TokenTree::Punct(p) if p.as_char() == '\'' && at_start => { + ty_generics.push(tt.clone()); + } + _ => {} + } + } + if nesting >= 1 { + impl_generics.push(tt); + } else if nesting == 0 { + rest.push(tt); + } + } + } + } + rest.extend(toks); + // This should be the body of the struct `{...}`. + let last = rest.pop(); + quote!(::kernel::__pin_data! { + parse_input: + @args(#args), + @sig(#(#rest)*), + @impl_generics(#(#impl_generics)*), + @ty_generics(#(#ty_generics)*), + @body(#last), + }) +} diff --git a/rust/macros/pinned_drop.rs b/rust/macros/pinned_drop.rs new file mode 100644 index 000000000000..88fb72b20660 --- /dev/null +++ b/rust/macros/pinned_drop.rs @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +use proc_macro::{TokenStream, TokenTree}; + +pub(crate) fn pinned_drop(_args: TokenStream, input: TokenStream) -> TokenStream { + let mut toks = input.into_iter().collect::<Vec<_>>(); + assert!(!toks.is_empty()); + // Ensure that we have an `impl` item. + assert!(matches!(&toks[0], TokenTree::Ident(i) if i.to_string() == "impl")); + // Ensure that we are implementing `PinnedDrop`. + let mut nesting: usize = 0; + let mut pinned_drop_idx = None; + for (i, tt) in toks.iter().enumerate() { + match tt { + TokenTree::Punct(p) if p.as_char() == '<' => { + nesting += 1; + } + TokenTree::Punct(p) if p.as_char() == '>' => { + nesting = nesting.checked_sub(1).unwrap(); + continue; + } + _ => {} + } + if i >= 1 && nesting == 0 { + // Found the end of the generics, this should be `PinnedDrop`. + assert!( + matches!(tt, TokenTree::Ident(i) if i.to_string() == "PinnedDrop"), + "expected 'PinnedDrop', found: '{:?}'", + tt + ); + pinned_drop_idx = Some(i); + break; + } + } + let idx = pinned_drop_idx + .unwrap_or_else(|| panic!("Expected an `impl` block implementing `PinnedDrop`.")); + // Fully qualify the `PinnedDrop`, as to avoid any tampering. + toks.splice(idx..idx, quote!(::kernel::init::)); + // Take the `{}` body and call the declarative macro. + if let Some(TokenTree::Group(last)) = toks.pop() { + let last = last.stream(); + quote!(::kernel::__pinned_drop! { + @impl_sig(#(#toks)*), + @impl_body(#last), + }) + } else { + TokenStream::from_iter(toks) + } +} diff --git a/rust/macros/quote.rs b/rust/macros/quote.rs new file mode 100644 index 000000000000..c8e08b3c1e4c --- /dev/null +++ b/rust/macros/quote.rs @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: Apache-2.0 OR MIT + +use proc_macro::{TokenStream, TokenTree}; + +pub(crate) trait ToTokens { + fn to_tokens(&self, tokens: &mut TokenStream); +} + +impl<T: ToTokens> ToTokens for Option<T> { + fn to_tokens(&self, tokens: &mut TokenStream) { + if let Some(v) = self { + v.to_tokens(tokens); + } + } +} + +impl ToTokens for proc_macro::Group { + fn to_tokens(&self, tokens: &mut TokenStream) { + tokens.extend([TokenTree::from(self.clone())]); + } +} + +impl ToTokens for TokenTree { + fn to_tokens(&self, tokens: &mut TokenStream) { + tokens.extend([self.clone()]); + } +} + +impl ToTokens for TokenStream { + fn to_tokens(&self, tokens: &mut TokenStream) { + tokens.extend(self.clone()); + } +} + +/// Converts tokens into [`proc_macro::TokenStream`] and performs variable interpolations with +/// the given span. +/// +/// This is a similar to the +/// [`quote_spanned!`](https://docs.rs/quote/latest/quote/macro.quote_spanned.html) macro from the +/// `quote` crate but provides only just enough functionality needed by the current `macros` crate. +macro_rules! quote_spanned { + ($span:expr => $($tt:tt)*) => { + #[allow(clippy::vec_init_then_push)] + { + let mut tokens = ::std::vec::Vec::new(); + let span = $span; + quote_spanned!(@proc tokens span $($tt)*); + ::proc_macro::TokenStream::from_iter(tokens) + }}; + (@proc $v:ident $span:ident) => {}; + (@proc $v:ident $span:ident #$id:ident $($tt:tt)*) => { + let mut ts = ::proc_macro::TokenStream::new(); + $crate::quote::ToTokens::to_tokens(&$id, &mut ts); + $v.extend(ts); + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident #(#$id:ident)* $($tt:tt)*) => { + for token in $id { + let mut ts = ::proc_macro::TokenStream::new(); + $crate::quote::ToTokens::to_tokens(&token, &mut ts); + $v.extend(ts); + } + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident ( $($inner:tt)* ) $($tt:tt)*) => { + let mut tokens = ::std::vec::Vec::new(); + quote_spanned!(@proc tokens $span $($inner)*); + $v.push(::proc_macro::TokenTree::Group(::proc_macro::Group::new( + ::proc_macro::Delimiter::Parenthesis, + ::proc_macro::TokenStream::from_iter(tokens) + ))); + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident [ $($inner:tt)* ] $($tt:tt)*) => { + let mut tokens = ::std::vec::Vec::new(); + quote_spanned!(@proc tokens $span $($inner)*); + $v.push(::proc_macro::TokenTree::Group(::proc_macro::Group::new( + ::proc_macro::Delimiter::Bracket, + ::proc_macro::TokenStream::from_iter(tokens) + ))); + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident { $($inner:tt)* } $($tt:tt)*) => { + let mut tokens = ::std::vec::Vec::new(); + quote_spanned!(@proc tokens $span $($inner)*); + $v.push(::proc_macro::TokenTree::Group(::proc_macro::Group::new( + ::proc_macro::Delimiter::Brace, + ::proc_macro::TokenStream::from_iter(tokens) + ))); + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident :: $($tt:tt)*) => { + $v.push(::proc_macro::TokenTree::Punct( + ::proc_macro::Punct::new(':', ::proc_macro::Spacing::Joint) + )); + $v.push(::proc_macro::TokenTree::Punct( + ::proc_macro::Punct::new(':', ::proc_macro::Spacing::Alone) + )); + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident : $($tt:tt)*) => { + $v.push(::proc_macro::TokenTree::Punct( + ::proc_macro::Punct::new(':', ::proc_macro::Spacing::Alone) + )); + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident , $($tt:tt)*) => { + $v.push(::proc_macro::TokenTree::Punct( + ::proc_macro::Punct::new(',', ::proc_macro::Spacing::Alone) + )); + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident @ $($tt:tt)*) => { + $v.push(::proc_macro::TokenTree::Punct( + ::proc_macro::Punct::new('@', ::proc_macro::Spacing::Alone) + )); + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident ! $($tt:tt)*) => { + $v.push(::proc_macro::TokenTree::Punct( + ::proc_macro::Punct::new('!', ::proc_macro::Spacing::Alone) + )); + quote_spanned!(@proc $v $span $($tt)*); + }; + (@proc $v:ident $span:ident $id:ident $($tt:tt)*) => { + $v.push(::proc_macro::TokenTree::Ident(::proc_macro::Ident::new(stringify!($id), $span))); + quote_spanned!(@proc $v $span $($tt)*); + }; +} + +/// Converts tokens into [`proc_macro::TokenStream`] and performs variable interpolations with +/// mixed site span ([`Span::mixed_site()`]). +/// +/// This is a similar to the [`quote!`](https://docs.rs/quote/latest/quote/macro.quote.html) macro +/// from the `quote` crate but provides only just enough functionality needed by the current +/// `macros` crate. +/// +/// [`Span::mixed_site()`]: https://doc.rust-lang.org/proc_macro/struct.Span.html#method.mixed_site +macro_rules! quote { + ($($tt:tt)*) => { + quote_spanned!(::proc_macro::Span::mixed_site() => $($tt)*) + } +} diff --git a/rust/uapi/lib.rs b/rust/uapi/lib.rs new file mode 100644 index 000000000000..29f69f3a52de --- /dev/null +++ b/rust/uapi/lib.rs @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 + +//! UAPI Bindings. +//! +//! Contains the bindings generated by `bindgen` for UAPI interfaces. +//! +//! This crate may be used directly by drivers that need to interact with +//! userspace APIs. + +#![no_std] +#![feature(core_ffi_c)] +// See <https://github.com/rust-lang/rust-bindgen/issues/1651>. +#![cfg_attr(test, allow(deref_nullptr))] +#![cfg_attr(test, allow(unaligned_references))] +#![cfg_attr(test, allow(unsafe_op_in_unsafe_fn))] +#![allow( + clippy::all, + missing_docs, + non_camel_case_types, + non_upper_case_globals, + non_snake_case, + improper_ctypes, + unreachable_pub, + unsafe_op_in_unsafe_fn +)] + +include!(concat!(env!("OBJTREE"), "/rust/uapi/uapi_generated.rs")); diff --git a/rust/uapi/uapi_helper.h b/rust/uapi/uapi_helper.h new file mode 100644 index 000000000000..301f5207f023 --- /dev/null +++ b/rust/uapi/uapi_helper.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Header that contains the headers for which Rust UAPI bindings + * will be automatically generated by `bindgen`. + * + * Sorted alphabetically. + */ + +#include <uapi/asm-generic/ioctl.h> |