diff options
Diffstat (limited to 'sound/soc/codecs/tlv320dac33.c')
-rw-r--r-- | sound/soc/codecs/tlv320dac33.c | 250 |
1 files changed, 238 insertions, 12 deletions
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index 824bb354ebc9..3eddaec728c1 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -50,6 +50,18 @@ #define LATENCY_TIME_MS 20 +#define MODE7_LTHR 10 +#define MODE7_UTHR (DAC33_BUFFER_SIZE_SAMPLES - 10) + +#define BURST_BASEFREQ_HZ 49152000 + +#define SAMPLES_TO_US(rate, samples) \ + (1000000000 / ((rate * 1000) / samples)) + +#define US_TO_SAMPLES(rate, us) \ + (rate / (1000000 / us)) + + static struct snd_soc_codec *tlv320dac33_codec; enum dac33_state { @@ -92,9 +104,18 @@ struct tlv320dac33_priv { enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */ unsigned int nsample; /* burst read amount from host */ u8 burst_bclkdiv; /* BCLK divider value in burst mode */ + unsigned int burst_rate; /* Interface speed in Burst modes */ int keep_bclk; /* Keep the BCLK continuously running * in FIFO modes */ + spinlock_t lock; + unsigned long long t_stamp1; /* Time stamp for FIFO modes to */ + unsigned long long t_stamp2; /* calculate the FIFO caused delay */ + + unsigned int mode1_us_burst; /* Time to burst read n number of + * samples */ + unsigned int mode7_us_to_lthr; /* Time to reach lthr from uthr */ + enum dac33_state state; }; @@ -384,10 +405,14 @@ static int dac33_set_nsample(struct snd_kcontrol *kcontrol, return 0; if (ucontrol->value.integer.value[0] < dac33->nsample_min || - ucontrol->value.integer.value[0] > dac33->nsample_max) + ucontrol->value.integer.value[0] > dac33->nsample_max) { ret = -EINVAL; - else + } else { dac33->nsample = ucontrol->value.integer.value[0]; + /* Re calculate the burst time */ + dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate, + dac33->nsample); + } return ret; } @@ -557,13 +582,34 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33) switch (dac33->fifo_mode) { case DAC33_FIFO_MODE1: dac33_write16(codec, DAC33_NSAMPLE_MSB, - DAC33_THRREG(dac33->nsample)); + DAC33_THRREG(dac33->nsample + dac33->alarm_threshold)); + + /* Take the timestamps */ + spin_lock_irq(&dac33->lock); + dac33->t_stamp2 = ktime_to_us(ktime_get()); + dac33->t_stamp1 = dac33->t_stamp2; + spin_unlock_irq(&dac33->lock); + dac33_write16(codec, DAC33_PREFILL_MSB, DAC33_THRREG(dac33->alarm_threshold)); + /* Enable Alarm Threshold IRQ with a delay */ + udelay(SAMPLES_TO_US(dac33->burst_rate, + dac33->alarm_threshold)); + dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MAT); break; case DAC33_FIFO_MODE7: + /* Take the timestamp */ + spin_lock_irq(&dac33->lock); + dac33->t_stamp1 = ktime_to_us(ktime_get()); + /* Move back the timestamp with drain time */ + dac33->t_stamp1 -= dac33->mode7_us_to_lthr; + spin_unlock_irq(&dac33->lock); + dac33_write16(codec, DAC33_PREFILL_MSB, - DAC33_THRREG(10)); + DAC33_THRREG(MODE7_LTHR)); + + /* Enable Upper Threshold IRQ */ + dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MUT); break; default: dev_warn(codec->dev, "Unhandled FIFO mode: %d\n", @@ -580,6 +626,11 @@ static inline void dac33_playback_handler(struct tlv320dac33_priv *dac33) switch (dac33->fifo_mode) { case DAC33_FIFO_MODE1: + /* Take the timestamp */ + spin_lock_irq(&dac33->lock); + dac33->t_stamp2 = ktime_to_us(ktime_get()); + spin_unlock_irq(&dac33->lock); + dac33_write16(codec, DAC33_NSAMPLE_MSB, DAC33_THRREG(dac33->nsample)); break; @@ -632,7 +683,13 @@ static irqreturn_t dac33_interrupt_handler(int irq, void *dev) struct snd_soc_codec *codec = dev; struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec); - queue_work(dac33->dac33_wq, &dac33->work); + spin_lock(&dac33->lock); + dac33->t_stamp1 = ktime_to_us(ktime_get()); + spin_unlock(&dac33->lock); + + /* Do not schedule the workqueue in Mode7 */ + if (dac33->fifo_mode != DAC33_FIFO_MODE7) + queue_work(dac33->dac33_wq, &dac33->work); return IRQ_HANDLED; } @@ -782,11 +839,10 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream) case DAC33_FIFO_MODE1: dac33_write(codec, DAC33_FIFO_IRQ_MODE_B, DAC33_ATM(DAC33_FIFO_IRQ_MODE_LEVEL)); - dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MAT); break; case DAC33_FIFO_MODE7: - /* Disable all interrupts */ - dac33_write(codec, DAC33_FIFO_IRQ_MASK, 0); + dac33_write(codec, DAC33_FIFO_IRQ_MODE_A, + DAC33_UTM(DAC33_FIFO_IRQ_MODE_LEVEL)); break; default: /* in FIFO bypass mode, the interrupts are not used */ @@ -864,10 +920,8 @@ static int dac33_prepare_chip(struct snd_pcm_substream *substream) * Configure the threshold levels, and leave 10 sample space * at the bottom, and also at the top of the FIFO */ - dac33_write16(codec, DAC33_UTHR_MSB, - DAC33_THRREG(DAC33_BUFFER_SIZE_SAMPLES - 10)); - dac33_write16(codec, DAC33_LTHR_MSB, - DAC33_THRREG(10)); + dac33_write16(codec, DAC33_UTHR_MSB, DAC33_THRREG(MODE7_UTHR)); + dac33_write16(codec, DAC33_LTHR_MSB, DAC33_THRREG(MODE7_LTHR)); break; default: break; @@ -886,6 +940,10 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream) struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec); unsigned int nsample_limit; + /* In bypass mode we don't need to calculate */ + if (!dac33->fifo_mode) + return; + /* Number of samples (16bit, stereo) in one period */ dac33->nsample_min = snd_pcm_lib_period_bytes(substream) / 4; @@ -919,6 +977,24 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream) if (dac33->nsample > dac33->nsample_max) dac33->nsample = dac33->nsample_max; + + switch (dac33->fifo_mode) { + case DAC33_FIFO_MODE1: + dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate, + dac33->nsample); + dac33->t_stamp1 = 0; + dac33->t_stamp2 = 0; + break; + case DAC33_FIFO_MODE7: + dac33->mode7_us_to_lthr = + SAMPLES_TO_US(substream->runtime->rate, + MODE7_UTHR - MODE7_LTHR + 1); + dac33->t_stamp1 = 0; + break; + default: + break; + } + } static int dac33_pcm_prepare(struct snd_pcm_substream *substream, @@ -963,6 +1039,151 @@ static int dac33_pcm_trigger(struct snd_pcm_substream *substream, int cmd, return ret; } +static snd_pcm_sframes_t dac33_dai_delay( + struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec); + unsigned long long t0, t1, t_now; + unsigned int time_delta; + int samples_out, samples_in, samples; + snd_pcm_sframes_t delay = 0; + + switch (dac33->fifo_mode) { + case DAC33_FIFO_BYPASS: + break; + case DAC33_FIFO_MODE1: + spin_lock(&dac33->lock); + t0 = dac33->t_stamp1; + t1 = dac33->t_stamp2; + spin_unlock(&dac33->lock); + t_now = ktime_to_us(ktime_get()); + + /* We have not started to fill the FIFO yet, delay is 0 */ + if (!t1) + goto out; + + if (t0 > t1) { + /* + * Phase 1: + * After Alarm threshold, and before nSample write + */ + time_delta = t_now - t0; + samples_out = time_delta ? US_TO_SAMPLES( + substream->runtime->rate, + time_delta) : 0; + + if (likely(dac33->alarm_threshold > samples_out)) + delay = dac33->alarm_threshold - samples_out; + else + delay = 0; + } else if ((t_now - t1) <= dac33->mode1_us_burst) { + /* + * Phase 2: + * After nSample write (during burst operation) + */ + time_delta = t_now - t0; + samples_out = time_delta ? US_TO_SAMPLES( + substream->runtime->rate, + time_delta) : 0; + + time_delta = t_now - t1; + samples_in = time_delta ? US_TO_SAMPLES( + dac33->burst_rate, + time_delta) : 0; + + samples = dac33->alarm_threshold; + samples += (samples_in - samples_out); + + if (likely(samples > 0)) + delay = samples; + else + delay = 0; + } else { + /* + * Phase 3: + * After burst operation, before next alarm threshold + */ + time_delta = t_now - t0; + samples_out = time_delta ? US_TO_SAMPLES( + substream->runtime->rate, + time_delta) : 0; + + samples_in = dac33->nsample; + samples = dac33->alarm_threshold; + samples += (samples_in - samples_out); + + if (likely(samples > 0)) + delay = samples > DAC33_BUFFER_SIZE_SAMPLES ? + DAC33_BUFFER_SIZE_SAMPLES : samples; + else + delay = 0; + } + break; + case DAC33_FIFO_MODE7: + spin_lock(&dac33->lock); + t0 = dac33->t_stamp1; + spin_unlock(&dac33->lock); + t_now = ktime_to_us(ktime_get()); + + /* We have not started to fill the FIFO yet, delay is 0 */ + if (!t0) + goto out; + + if (t_now <= t0) { + /* + * Either the timestamps are messed or equal. Report + * maximum delay + */ + delay = MODE7_UTHR; + goto out; + } + + time_delta = t_now - t0; + if (time_delta <= dac33->mode7_us_to_lthr) { + /* + * Phase 1: + * After burst (draining phase) + */ + samples_out = US_TO_SAMPLES( + substream->runtime->rate, + time_delta); + + if (likely(MODE7_UTHR > samples_out)) + delay = MODE7_UTHR - samples_out; + else + delay = 0; + } else { + /* + * Phase 2: + * During burst operation + */ + time_delta = time_delta - dac33->mode7_us_to_lthr; + + samples_out = US_TO_SAMPLES( + substream->runtime->rate, + time_delta); + samples_in = US_TO_SAMPLES( + dac33->burst_rate, + time_delta); + delay = MODE7_LTHR + samples_in - samples_out; + + if (unlikely(delay > MODE7_UTHR)) + delay = MODE7_UTHR; + } + break; + default: + dev_warn(codec->dev, "Unhandled FIFO mode: %d\n", + dac33->fifo_mode); + break; + } +out: + return delay; +} + static int dac33_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id, unsigned int freq, int dir) { @@ -1174,6 +1395,7 @@ static struct snd_soc_dai_ops dac33_dai_ops = { .hw_params = dac33_hw_params, .prepare = dac33_pcm_prepare, .trigger = dac33_pcm_trigger, + .delay = dac33_dai_delay, .set_sysclk = dac33_set_dai_sysclk, .set_fmt = dac33_set_dai_fmt, }; @@ -1214,6 +1436,7 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, mutex_init(&codec->mutex); mutex_init(&dac33->mutex); + spin_lock_init(&dac33->lock); INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -1238,9 +1461,12 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, dac33->power_gpio = pdata->power_gpio; dac33->burst_bclkdiv = pdata->burst_bclkdiv; + /* Pre calculate the burst rate */ + dac33->burst_rate = BURST_BASEFREQ_HZ / dac33->burst_bclkdiv / 32; dac33->keep_bclk = pdata->keep_bclk; dac33->irq = client->irq; dac33->nsample = NSAMPLE_MAX; + dac33->nsample_max = NSAMPLE_MAX; /* Disable FIFO use by default */ dac33->fifo_mode = DAC33_FIFO_BYPASS; |