diff options
Diffstat (limited to 'sound/soc/codecs/wm8996.c')
-rw-r--r-- | sound/soc/codecs/wm8996.c | 112 |
1 files changed, 43 insertions, 69 deletions
diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 61f7daa4d0e6..aba144f69946 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -73,7 +73,6 @@ struct wm8996_priv { struct regulator_bulk_data supplies[WM8996_NUM_SUPPLIES]; struct notifier_block disable_nb[WM8996_NUM_SUPPLIES]; - struct regulator *cpvdd; int bg_ena; struct wm8996_pdata pdata; @@ -90,6 +89,7 @@ struct wm8996_priv { struct snd_soc_jack *jack; bool detecting; bool jack_mic; + int jack_flips; wm8996_polarity_fn polarity_cb; #ifdef CONFIG_GPIOLIB @@ -792,29 +792,18 @@ static int bg_event(struct snd_soc_dapm_widget *w, static int cp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { - struct snd_soc_codec *codec = w->codec; - struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); int ret = 0; switch (event) { - case SND_SOC_DAPM_PRE_PMU: - ret = regulator_enable(wm8996->cpvdd); - if (ret != 0) - dev_err(codec->dev, "Failed to enable CPVDD: %d\n", - ret); - break; case SND_SOC_DAPM_POST_PMU: msleep(5); break; - case SND_SOC_DAPM_POST_PMD: - regulator_disable_deferred(wm8996->cpvdd, 20); - break; default: BUG(); ret = -EINVAL; } - return ret; + return 0; } static int rmv_short_event(struct snd_soc_dapm_widget *w, @@ -1116,12 +1105,12 @@ SND_SOC_DAPM_INPUT("IN2RP"), SND_SOC_DAPM_INPUT("DMIC1DAT"), SND_SOC_DAPM_INPUT("DMIC2DAT"), +SND_SOC_DAPM_REGULATOR_SUPPLY("CPVDD", 20), SND_SOC_DAPM_SUPPLY_S("SYSCLK", 1, WM8996_AIF_CLOCKING_1, 0, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("SYSDSPCLK", 2, WM8996_CLOCKING_1, 1, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("AIFCLK", 2, WM8996_CLOCKING_1, 2, 0, NULL, 0), SND_SOC_DAPM_SUPPLY_S("Charge Pump", 2, WM8996_CHARGE_PUMP_1, 15, 0, cp_event, - SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | - SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_SUPPLY("Bandgap", SND_SOC_NOPM, 0, 0, bg_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_SUPPLY("LDO2", WM8996_POWER_MANAGEMENT_2, 1, 0, NULL, 0), @@ -1280,6 +1269,7 @@ static const struct snd_soc_dapm_route wm8996_dapm_routes[] = { { "AIFCLK", NULL, "SYSCLK" }, { "SYSDSPCLK", NULL, "SYSCLK" }, { "Charge Pump", NULL, "SYSCLK" }, + { "Charge Pump", NULL, "CPVDD" }, { "MICB1", NULL, "LDO2" }, { "MICB1", NULL, "MICB1 Audio" }, @@ -1719,6 +1709,7 @@ static bool wm8996_volatile_register(struct device *dev, unsigned int reg) static int wm8996_reset(struct wm8996_priv *wm8996) { if (wm8996->pdata.ldo_ena > 0) { + gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 1); gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0); return 0; } else { @@ -2438,6 +2429,7 @@ int wm8996_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack, wm8996->jack = jack; wm8996->detecting = true; wm8996->polarity_cb = polarity_cb; + wm8996->jack_flips = 0; if (wm8996->polarity_cb) wm8996->polarity_cb(codec, 0); @@ -2553,6 +2545,19 @@ static void wm8996_hpdet_start(struct snd_soc_codec *codec) WM8996_HP_POLL, WM8996_HP_POLL); } +static void wm8996_report_headphone(struct snd_soc_codec *codec) +{ + dev_dbg(codec->dev, "Headphone detected\n"); + wm8996_hpdet_start(codec); + + /* Increase the detection rate a bit for responsiveness. */ + snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, + WM8996_MICD_RATE_MASK | + WM8996_MICD_BIAS_STARTTIME_MASK, + 7 << WM8996_MICD_RATE_SHIFT | + 7 << WM8996_MICD_BIAS_STARTTIME_SHIFT); +} + static void wm8996_micd(struct snd_soc_codec *codec) { struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); @@ -2572,6 +2577,7 @@ static void wm8996_micd(struct snd_soc_codec *codec) dev_dbg(codec->dev, "Jack removal detected\n"); wm8996->jack_mic = false; wm8996->detecting = true; + wm8996->jack_flips = 0; snd_soc_jack_report(wm8996->jack, 0, SND_JACK_LINEOUT | SND_JACK_HEADSET | SND_JACK_BTN_0); @@ -2612,9 +2618,17 @@ static void wm8996_micd(struct snd_soc_codec *codec) /* If we detected a lower impedence during initial startup * then we probably have the wrong polarity, flip it. Don't * do this for the lowest impedences to speed up detection of - * plain headphones. + * plain headphones. If both polarities report a low + * impedence then give up and report headphones. */ if (wm8996->detecting && (val & 0x3f0)) { + wm8996->jack_flips++; + + if (wm8996->jack_flips > 1) { + wm8996_report_headphone(codec); + return; + } + reg = snd_soc_read(codec, WM8996_ACCESSORY_DETECT_MODE_2); reg ^= WM8996_HPOUT1FB_SRC | WM8996_MICD_SRC | WM8996_MICD_BIAS_SRC; @@ -2641,17 +2655,7 @@ static void wm8996_micd(struct snd_soc_codec *codec) snd_soc_jack_report(wm8996->jack, SND_JACK_BTN_0, SND_JACK_BTN_0); } else if (wm8996->detecting) { - dev_dbg(codec->dev, "Headphone detected\n"); - wm8996_hpdet_start(codec); - - /* Increase the detection rate a bit for - * responsiveness. - */ - snd_soc_update_bits(codec, WM8996_MIC_DETECT_1, - WM8996_MICD_RATE_MASK | - WM8996_MICD_BIAS_STARTTIME_MASK, - 7 << WM8996_MICD_RATE_SHIFT | - 7 << WM8996_MICD_BIAS_STARTTIME_SHIFT); + wm8996_report_headphone(codec); } } } @@ -2768,7 +2772,7 @@ static void wm8996_retune_mobile_pdata(struct snd_soc_codec *codec) wm8996->retune_mobile_enum.max = wm8996->num_retune_mobile_texts; wm8996->retune_mobile_enum.texts = wm8996->retune_mobile_texts; - ret = snd_soc_add_controls(codec, controls, ARRAY_SIZE(controls)); + ret = snd_soc_add_codec_controls(codec, controls, ARRAY_SIZE(controls)); if (ret != 0) dev_err(codec->dev, "Failed to add ReTune Mobile controls: %d\n", ret); @@ -2791,7 +2795,6 @@ static int wm8996_probe(struct snd_soc_codec *codec) int ret; struct wm8996_priv *wm8996 = snd_soc_codec_get_drvdata(codec); struct i2c_client *i2c = to_i2c_client(codec->dev); - struct snd_soc_dapm_context *dapm = &codec->dapm; int i, irq_flags; wm8996->codec = codec; @@ -2799,8 +2802,6 @@ static int wm8996_probe(struct snd_soc_codec *codec) init_completion(&wm8996->dcs_done); init_completion(&wm8996->fll_lock); - dapm->idle_bias_off = true; - codec->control_data = wm8996->regmap; ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_REGMAP); @@ -2966,7 +2967,7 @@ static int wm8996_probe(struct snd_soc_codec *codec) if (wm8996->pdata.num_retune_mobile_cfgs) wm8996_retune_mobile_pdata(codec); else - snd_soc_add_controls(codec, wm8996_eq_controls, + snd_soc_add_codec_controls(codec, wm8996_eq_controls, ARRAY_SIZE(wm8996_eq_controls)); /* If the TX LRCLK pins are not in LRCLK mode configure the @@ -3038,7 +3039,6 @@ static int wm8996_remove(struct snd_soc_codec *codec) for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) regulator_unregister_notifier(wm8996->supplies[i].consumer, &wm8996->disable_nb[i]); - regulator_put(wm8996->cpvdd); regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); return 0; @@ -3054,6 +3054,7 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8996 = { .probe = wm8996_probe, .remove = wm8996_remove, .set_bias_level = wm8996_set_bias_level, + .idle_bias_off = true, .seq_notifier = wm8996_seq_notifier, .controls = wm8996_snd_controls, .num_controls = ARRAY_SIZE(wm8996_snd_controls), @@ -3087,6 +3088,7 @@ static struct snd_soc_dai_driver wm8996_dai[] = { .channels_max = 6, .rates = WM8996_RATES, .formats = WM8996_FORMATS, + .sig_bits = 24, }, .capture = { .stream_name = "AIF1 Capture", @@ -3094,6 +3096,7 @@ static struct snd_soc_dai_driver wm8996_dai[] = { .channels_max = 6, .rates = WM8996_RATES, .formats = WM8996_FORMATS, + .sig_bits = 24, }, .ops = &wm8996_dai_ops, }, @@ -3105,6 +3108,7 @@ static struct snd_soc_dai_driver wm8996_dai[] = { .channels_max = 2, .rates = WM8996_RATES, .formats = WM8996_FORMATS, + .sig_bits = 24, }, .capture = { .stream_name = "AIF2 Capture", @@ -3112,6 +3116,7 @@ static struct snd_soc_dai_driver wm8996_dai[] = { .channels_max = 2, .rates = WM8996_RATES, .formats = WM8996_FORMATS, + .sig_bits = 24, }, .ops = &wm8996_dai_ops, }, @@ -3149,25 +3154,18 @@ static __devinit int wm8996_i2c_probe(struct i2c_client *i2c, for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++) wm8996->supplies[i].supply = wm8996_supply_names[i]; - ret = regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8996->supplies), - wm8996->supplies); + ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8996->supplies), + wm8996->supplies); if (ret != 0) { dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); goto err_gpio; } - wm8996->cpvdd = regulator_get(&i2c->dev, "CPVDD"); - if (IS_ERR(wm8996->cpvdd)) { - ret = PTR_ERR(wm8996->cpvdd); - dev_err(&i2c->dev, "Failed to get CPVDD: %d\n", ret); - goto err_get; - } - ret = regulator_bulk_enable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); if (ret != 0) { dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); - goto err_cpvdd; + goto err_gpio; } if (wm8996->pdata.ldo_ena > 0) { @@ -3188,7 +3186,7 @@ static __devinit int wm8996_i2c_probe(struct i2c_client *i2c, goto err_regmap; } if (reg != 0x8915) { - dev_err(&i2c->dev, "Device is not a WM8996, ID %x\n", ret); + dev_err(&i2c->dev, "Device is not a WM8996, ID %x\n", reg); ret = -EINVAL; goto err_regmap; } @@ -3229,10 +3227,6 @@ err_enable: if (wm8996->pdata.ldo_ena > 0) gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0); regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); -err_cpvdd: - regulator_put(wm8996->cpvdd); -err_get: - regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); err_gpio: if (wm8996->pdata.ldo_ena > 0) gpio_free(wm8996->pdata.ldo_ena); @@ -3247,8 +3241,6 @@ static __devexit int wm8996_i2c_remove(struct i2c_client *client) snd_soc_unregister_codec(&client->dev); wm8996_free_gpio(wm8996); - regulator_put(wm8996->cpvdd); - regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies); regmap_exit(wm8996->regmap); if (wm8996->pdata.ldo_ena > 0) { gpio_set_value_cansleep(wm8996->pdata.ldo_ena, 0); @@ -3273,25 +3265,7 @@ static struct i2c_driver wm8996_i2c_driver = { .id_table = wm8996_i2c_id, }; -static int __init wm8996_modinit(void) -{ - int ret; - - ret = i2c_add_driver(&wm8996_i2c_driver); - if (ret != 0) { - printk(KERN_ERR "Failed to register WM8996 I2C driver: %d\n", - ret); - } - - return ret; -} -module_init(wm8996_modinit); - -static void __exit wm8996_exit(void) -{ - i2c_del_driver(&wm8996_i2c_driver); -} -module_exit(wm8996_exit); +module_i2c_driver(wm8996_i2c_driver); MODULE_DESCRIPTION("ASoC WM8996 driver"); MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |