diff options
Diffstat (limited to 'sound/soc/intel/boards/bytcr_rt5640.c')
-rw-r--r-- | sound/soc/intel/boards/bytcr_rt5640.c | 120 |
1 files changed, 51 insertions, 69 deletions
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index a6e837290c7d..a0c5f0e9c22a 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -269,13 +269,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; if (SND_SOC_DAPM_EVENT_ON(event)) { - if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { - ret = clk_prepare_enable(priv->mclk); - if (ret < 0) { - dev_err(card->dev, - "could not configure MCLK state\n"); - return ret; - } + ret = clk_prepare_enable(priv->mclk); + if (ret < 0) { + dev_err(card->dev, "could not configure MCLK state\n"); + return ret; } ret = byt_rt5640_prepare_and_enable_pll1(codec_dai, 48000); } else { @@ -287,10 +284,8 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK, 48000 * 512, SND_SOC_CLOCK_IN); - if (!ret) { - if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) - clk_disable_unprepare(priv->mclk); - } + if (!ret) + clk_disable_unprepare(priv->mclk); } if (ret < 0) { @@ -1217,30 +1212,25 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) return ret; } - if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { - /* - * The firmware might enable the clock at - * boot (this information may or may not - * be reflected in the enable clock register). - * To change the rate we must disable the clock - * first to cover these cases. Due to common - * clock framework restrictions that do not allow - * to disable a clock that has not been enabled, - * we need to enable the clock first. - */ - ret = clk_prepare_enable(priv->mclk); - if (!ret) - clk_disable_unprepare(priv->mclk); - - if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) - ret = clk_set_rate(priv->mclk, 25000000); - else - ret = clk_set_rate(priv->mclk, 19200000); + /* + * The firmware might enable the clock at boot (this information + * may or may not be reflected in the enable clock register). + * To change the rate we must disable the clock first to cover + * these cases. Due to common clock framework restrictions that + * do not allow to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(priv->mclk); + if (!ret) + clk_disable_unprepare(priv->mclk); - if (ret) { - dev_err(card->dev, "unable to set MCLK rate\n"); - return ret; - } + if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ) + ret = clk_set_rate(priv->mclk, 25000000); + else + ret = clk_set_rate(priv->mclk, 19200000); + if (ret) { + dev_err(card->dev, "unable to set MCLK rate\n"); + return ret; } if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) { @@ -1336,7 +1326,7 @@ static int byt_rt5640_codec_fixup(struct snd_soc_pcm_runtime *rtd, ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBS_CFS); + SND_SOC_DAIFMT_CBC_CFC); if (ret < 0) { dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); return ret; @@ -1411,7 +1401,7 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = { .id = 0, .no_pcm = 1, .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBS_CFS, + | SND_SOC_DAIFMT_CBC_CFC, .be_hw_params_fixup = byt_rt5640_codec_fixup, .dpcm_playback = 1, .dpcm_capture = 1, @@ -1495,12 +1485,12 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; static const char * const map_name[] = { "dmic1", "dmic2", "in1", "in3", "none" }; + struct snd_soc_acpi_mach *mach = dev_get_platdata(dev); __maybe_unused const char *spk_type; const struct dmi_system_id *dmi_id; const char *headset2_string = ""; const char *lineout_string = ""; struct byt_rt5640_private *priv; - struct snd_soc_acpi_mach *mach; const char *platform_name; struct acpi_device *adev; struct device *codec_dev; @@ -1511,13 +1501,12 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) int aif; is_bytcr = false; - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; /* register the soc card */ - byt_rt5640_card.dev = &pdev->dev; - mach = byt_rt5640_card.dev->platform_data; + byt_rt5640_card.dev = dev; snd_soc_card_set_drvdata(&byt_rt5640_card, priv); /* fix index of codec dai */ @@ -1537,7 +1526,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) put_device(&adev->dev); byt_rt5640_dais[dai_index].codecs->name = byt_rt5640_codec_name; } else { - dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id); + dev_err(dev, "Error cannot find '%s' dev\n", mach->id); return -ENXIO; } @@ -1580,13 +1569,13 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) &pkg_ctx); if (pkg_found) { if (chan_package.aif_value == 1) { - dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); + dev_info(dev, "BIOS Routing: AIF1 connected\n"); byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF1; } else if (chan_package.aif_value == 2) { - dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n"); + dev_info(dev, "BIOS Routing: AIF2 connected\n"); byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF2; } else { - dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n"); + dev_info(dev, "BIOS Routing isn't valid, ignored\n"); pkg_found = false; } } @@ -1610,7 +1599,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) if (dmi_id) byt_rt5640_quirk = (unsigned long)dmi_id->driver_data; if (quirk_override != -1) { - dev_info(&pdev->dev, "Overriding quirk 0x%lx => 0x%x\n", + dev_info(dev, "Overriding quirk 0x%lx => 0x%x\n", byt_rt5640_quirk, quirk_override); byt_rt5640_quirk = quirk_override; } @@ -1624,12 +1613,12 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) acpi_dev_add_driver_gpios(ACPI_COMPANION(priv->codec_dev), byt_rt5640_hp_elitepad_1000g2_gpios); - priv->hsmic_detect = devm_fwnode_gpiod_get(&pdev->dev, codec_dev->fwnode, + priv->hsmic_detect = devm_fwnode_gpiod_get(dev, codec_dev->fwnode, "headset-mic-detect", GPIOD_IN, "headset-mic-detect"); if (IS_ERR(priv->hsmic_detect)) { - ret_val = PTR_ERR(priv->hsmic_detect); - dev_err_probe(&pdev->dev, ret_val, "getting hsmic-detect GPIO\n"); + ret_val = dev_err_probe(dev, PTR_ERR(priv->hsmic_detect), + "getting hsmic-detect GPIO\n"); goto err_device; } } @@ -1639,7 +1628,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) if (ret_val) goto err_remove_gpios; - log_quirks(&pdev->dev); + log_quirks(dev); if ((byt_rt5640_quirk & BYT_RT5640_SSP2_AIF2) || (byt_rt5640_quirk & BYT_RT5640_SSP0_AIF2)) { @@ -1654,23 +1643,18 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) byt_rt5640_dais[dai_index].cpus->dai_name = "ssp0-port"; if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { - priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3"); if (IS_ERR(priv->mclk)) { - ret_val = PTR_ERR(priv->mclk); - - dev_err(&pdev->dev, - "Failed to get MCLK from pmc_plt_clk_3: %d\n", - ret_val); - - /* - * Fall back to bit clock usage for -ENOENT (clock not - * available likely due to missing dependencies), bail - * for all other errors, including -EPROBE_DEFER - */ - if (ret_val != -ENOENT) - goto err; - byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN; + ret_val = dev_err_probe(dev, PTR_ERR(priv->mclk), + "Failed to get MCLK from pmc_plt_clk_3\n"); + goto err; } + /* + * Fall back to bit clock usage when clock is not + * available likely due to missing dependencies. + */ + if (!priv->mclk) + byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN; } if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) { @@ -1714,7 +1698,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) if (ret_val) goto err; - sof_parent = snd_soc_acpi_sof_parent(&pdev->dev); + sof_parent = snd_soc_acpi_sof_parent(dev); /* set card and driver name */ if (sof_parent) { @@ -1729,11 +1713,9 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) if (sof_parent) dev->driver->pm = &snd_soc_pm_ops; - ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5640_card); - + ret_val = devm_snd_soc_register_card(dev, &byt_rt5640_card); if (ret_val) { - dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n", - ret_val); + dev_err(dev, "devm_snd_soc_register_card failed %d\n", ret_val); goto err; } platform_set_drvdata(pdev, &byt_rt5640_card); |