aboutsummaryrefslogtreecommitdiff
path: root/tools/power
diff options
context:
space:
mode:
Diffstat (limited to 'tools/power')
-rw-r--r--tools/power/acpi/Makefile5
-rw-r--r--tools/power/acpi/common/cmfsize.c20
-rw-r--r--tools/power/acpi/common/getopt.c14
-rw-r--r--tools/power/acpi/os_specific/service_layers/oslibcfs.c214
-rw-r--r--tools/power/acpi/os_specific/service_layers/oslinuxtbl.c48
-rw-r--r--tools/power/acpi/os_specific/service_layers/osunixxf.c1311
-rw-r--r--tools/power/acpi/tools/acpidump/acpidump.h3
-rw-r--r--tools/power/acpi/tools/acpidump/apdump.c108
-rw-r--r--tools/power/acpi/tools/acpidump/apfiles.c92
-rw-r--r--tools/power/acpi/tools/acpidump/apmain.c96
-rw-r--r--tools/power/cpupower/bench/parse.c39
-rw-r--r--tools/power/cpupower/utils/cpufreq-set.c11
-rw-r--r--tools/power/cpupower/utils/helpers/sysfs.c2
-rw-r--r--tools/power/cpupower/utils/idle_monitor/mperf_monitor.c2
14 files changed, 1772 insertions, 193 deletions
diff --git a/tools/power/acpi/Makefile b/tools/power/acpi/Makefile
index e5a3c4be2a10..3d1537b93c64 100644
--- a/tools/power/acpi/Makefile
+++ b/tools/power/acpi/Makefile
@@ -108,13 +108,18 @@ DUMP_OBJS = \
apmain.o\
osunixdir.o\
osunixmap.o\
+ osunixxf.o\
tbprint.o\
tbxfroot.o\
utbuffer.o\
+ utdebug.o\
utexcep.o\
+ utglobal.o\
utmath.o\
+ utprint.o\
utstring.o\
utxferror.o\
+ oslibcfs.o\
oslinuxtbl.o\
cmfsize.o\
getopt.o
diff --git a/tools/power/acpi/common/cmfsize.c b/tools/power/acpi/common/cmfsize.c
index 5140e5edae1f..f4b953354ff7 100644
--- a/tools/power/acpi/common/cmfsize.c
+++ b/tools/power/acpi/common/cmfsize.c
@@ -58,44 +58,46 @@ ACPI_MODULE_NAME("cmfsize")
* RETURN: File Size. On error, -1 (ACPI_UINT32_MAX)
*
* DESCRIPTION: Get the size of a file. Uses seek-to-EOF. File must be open.
- * Does not disturb the current file pointer. Uses perror for
- * error messages.
+ * Does not disturb the current file pointer.
*
******************************************************************************/
-u32 cm_get_file_size(FILE * file)
+u32 cm_get_file_size(ACPI_FILE file)
{
long file_size;
long current_offset;
+ acpi_status status;
/* Save the current file pointer, seek to EOF to obtain file size */
- current_offset = ftell(file);
+ current_offset = acpi_os_get_file_offset(file);
if (current_offset < 0) {
goto offset_error;
}
- if (fseek(file, 0, SEEK_END)) {
+ status = acpi_os_set_file_offset(file, 0, ACPI_FILE_END);
+ if (ACPI_FAILURE(status)) {
goto seek_error;
}
- file_size = ftell(file);
+ file_size = acpi_os_get_file_offset(file);
if (file_size < 0) {
goto offset_error;
}
/* Restore original file pointer */
- if (fseek(file, current_offset, SEEK_SET)) {
+ status = acpi_os_set_file_offset(file, current_offset, ACPI_FILE_BEGIN);
+ if (ACPI_FAILURE(status)) {
goto seek_error;
}
return ((u32)file_size);
offset_error:
- perror("Could not get file offset");
+ acpi_log_error("Could not get file offset");
return (ACPI_UINT32_MAX);
seek_error:
- perror("Could not seek file");
+ acpi_log_error("Could not set file offset");
return (ACPI_UINT32_MAX);
}
diff --git a/tools/power/acpi/common/getopt.c b/tools/power/acpi/common/getopt.c
index a302f52e4fd3..2f0f34a36db4 100644
--- a/tools/power/acpi/common/getopt.c
+++ b/tools/power/acpi/common/getopt.c
@@ -51,14 +51,12 @@
* "f|" - Option has required single-char sub-options
*/
-#include <stdio.h>
-#include <string.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acapps.h"
#define ACPI_OPTION_ERROR(msg, badchar) \
- if (acpi_gbl_opterr) {fprintf (stderr, "%s%c\n", msg, badchar);}
+ if (acpi_gbl_opterr) {acpi_log_error ("%s%c\n", msg, badchar);}
int acpi_gbl_opterr = 1;
int acpi_gbl_optind = 1;
@@ -113,7 +111,7 @@ int acpi_getopt_argument(int argc, char **argv)
* PARAMETERS: argc, argv - from main
* opts - options info list
*
- * RETURN: Option character or EOF
+ * RETURN: Option character or ACPI_OPT_END
*
* DESCRIPTION: Get the next option
*
@@ -128,10 +126,10 @@ int acpi_getopt(int argc, char **argv, char *opts)
if (acpi_gbl_optind >= argc ||
argv[acpi_gbl_optind][0] != '-' ||
argv[acpi_gbl_optind][1] == '\0') {
- return (EOF);
- } else if (strcmp(argv[acpi_gbl_optind], "--") == 0) {
+ return (ACPI_OPT_END);
+ } else if (ACPI_STRCMP(argv[acpi_gbl_optind], "--") == 0) {
acpi_gbl_optind++;
- return (EOF);
+ return (ACPI_OPT_END);
}
}
@@ -142,7 +140,7 @@ int acpi_getopt(int argc, char **argv, char *opts)
/* Make sure that the option is legal */
if (current_char == ':' ||
- (opts_ptr = strchr(opts, current_char)) == NULL) {
+ (opts_ptr = ACPI_STRCHR(opts, current_char)) == NULL) {
ACPI_OPTION_ERROR("Illegal option: -", current_char);
if (argv[acpi_gbl_optind][++current_char_ptr] == '\0') {
diff --git a/tools/power/acpi/os_specific/service_layers/oslibcfs.c b/tools/power/acpi/os_specific/service_layers/oslibcfs.c
new file mode 100644
index 000000000000..c13ff9c51d74
--- /dev/null
+++ b/tools/power/acpi/os_specific/service_layers/oslibcfs.c
@@ -0,0 +1,214 @@
+/******************************************************************************
+ *
+ * Module Name: oslibcfs - C library OSL for file I/O
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2014, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <stdio.h>
+#include <stdarg.h>
+
+#define _COMPONENT ACPI_OS_SERVICES
+ACPI_MODULE_NAME("oslibcfs")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_open_file
+ *
+ * PARAMETERS: path - File path
+ * modes - File operation type
+ *
+ * RETURN: File descriptor.
+ *
+ * DESCRIPTION: Open a file for reading (ACPI_FILE_READING) or/and writing
+ * (ACPI_FILE_WRITING).
+ *
+ ******************************************************************************/
+ACPI_FILE acpi_os_open_file(const char *path, u8 modes)
+{
+ ACPI_FILE file;
+ u32 i = 0;
+ char modes_str[4];
+
+ if (modes & ACPI_FILE_READING) {
+ modes_str[i++] = 'r';
+ }
+ if (modes & ACPI_FILE_WRITING) {
+ modes_str[i++] = 'w';
+ }
+ if (modes & ACPI_FILE_BINARY) {
+ modes_str[i++] = 'b';
+ }
+
+ modes_str[i++] = '\0';
+
+ file = fopen(path, modes_str);
+ if (!file) {
+ perror("Could not open file");
+ }
+
+ return (file);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_close_file
+ *
+ * PARAMETERS: file - An open file descriptor
+ *
+ * RETURN: None.
+ *
+ * DESCRIPTION: Close a file opened via acpi_os_open_file.
+ *
+ ******************************************************************************/
+
+void acpi_os_close_file(ACPI_FILE file)
+{
+ fclose(file);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_read_file
+ *
+ * PARAMETERS: file - An open file descriptor
+ * buffer - Data buffer
+ * size - Data block size
+ * count - Number of data blocks
+ *
+ * RETURN: Number of bytes actually read.
+ *
+ * DESCRIPTION: Read from a file.
+ *
+ ******************************************************************************/
+
+int
+acpi_os_read_file(ACPI_FILE file, void *buffer, acpi_size size, acpi_size count)
+{
+ int length;
+
+ length = fread(buffer, size, count, file);
+ if (length < 0) {
+ perror("Error reading file");
+ }
+
+ return (length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_write_file
+ *
+ * PARAMETERS: file - An open file descriptor
+ * buffer - Data buffer
+ * size - Data block size
+ * count - Number of data blocks
+ *
+ * RETURN: Number of bytes actually written.
+ *
+ * DESCRIPTION: Write to a file.
+ *
+ ******************************************************************************/
+
+int
+acpi_os_write_file(ACPI_FILE file,
+ void *buffer, acpi_size size, acpi_size count)
+{
+ int length;
+
+ length = fwrite(buffer, size, count, file);
+ if (length < 0) {
+ perror("Error writing file");
+ }
+
+ return (length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_get_file_offset
+ *
+ * PARAMETERS: file - An open file descriptor
+ *
+ * RETURN: Current file pointer position.
+ *
+ * DESCRIPTION: Get current file offset.
+ *
+ ******************************************************************************/
+
+long acpi_os_get_file_offset(ACPI_FILE file)
+{
+ long offset;
+
+ offset = ftell(file);
+ return (offset);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_os_set_file_offset
+ *
+ * PARAMETERS: file - An open file descriptor
+ * offset - New file offset
+ * from - From begin/end of file
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Set current file offset.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_os_set_file_offset(ACPI_FILE file, long offset, u8 from)
+{
+ int ret = 0;
+
+ if (from == ACPI_FILE_BEGIN) {
+ ret = fseek(file, offset, SEEK_SET);
+ }
+ if (from == ACPI_FILE_END) {
+ ret = fseek(file, offset, SEEK_END);
+ }
+
+ if (ret < 0) {
+ return (AE_ERROR);
+ } else {
+ return (AE_OK);
+ }
+}
diff --git a/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c
index 28c52008e854..0dc2485dedf5 100644
--- a/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c
+++ b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c
@@ -77,6 +77,9 @@ osl_map_table(acpi_size address,
static void osl_unmap_table(struct acpi_table_header *table);
+static acpi_physical_address
+osl_find_rsdp_via_efi_by_keyword(FILE * file, const char *keyword);
+
static acpi_physical_address osl_find_rsdp_via_efi(void);
static acpi_status osl_load_rsdp(void);
@@ -417,6 +420,38 @@ acpi_os_get_table_by_index(u32 index,
/******************************************************************************
*
+ * FUNCTION: osl_find_rsdp_via_efi_by_keyword
+ *
+ * PARAMETERS: keyword - Character string indicating ACPI GUID version
+ * in the EFI table
+ *
+ * RETURN: RSDP address if found
+ *
+ * DESCRIPTION: Find RSDP address via EFI using keyword indicating the ACPI
+ * GUID version.
+ *
+ *****************************************************************************/
+
+static acpi_physical_address
+osl_find_rsdp_via_efi_by_keyword(FILE * file, const char *keyword)
+{
+ char buffer[80];
+ unsigned long long address = 0;
+ char format[32];
+
+ snprintf(format, 32, "%s=%s", keyword, "%llx");
+ fseek(file, 0, SEEK_SET);
+ while (fgets(buffer, 80, file)) {
+ if (sscanf(buffer, format, &address) == 1) {
+ break;
+ }
+ }
+
+ return ((acpi_physical_address) (address));
+}
+
+/******************************************************************************
+ *
* FUNCTION: osl_find_rsdp_via_efi
*
* PARAMETERS: None
@@ -430,20 +465,19 @@ acpi_os_get_table_by_index(u32 index,
static acpi_physical_address osl_find_rsdp_via_efi(void)
{
FILE *file;
- char buffer[80];
- unsigned long address = 0;
+ acpi_physical_address address = 0;
file = fopen(EFI_SYSTAB, "r");
if (file) {
- while (fgets(buffer, 80, file)) {
- if (sscanf(buffer, "ACPI20=0x%lx", &address) == 1) {
- break;
- }
+ address = osl_find_rsdp_via_efi_by_keyword(file, "ACPI20");
+ if (!address) {
+ address =
+ osl_find_rsdp_via_efi_by_keyword(file, "ACPI");
}
fclose(file);
}
- return ((acpi_physical_address) (address));
+ return (address);
}
/******************************************************************************
diff --git a/tools/power/acpi/os_specific/service_layers/osunixxf.c b/tools/power/acpi/os_specific/service_layers/osunixxf.c
new file mode 100644
index 000000000000..60b58cd18410
--- /dev/null
+++ b/tools/power/acpi/os_specific/service_layers/osunixxf.c
@@ -0,0 +1,1311 @@
+/******************************************************************************
+ *
+ * Module Name: osunixxf - UNIX OSL interfaces
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2014, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+/*
+ * These interfaces are required in order to compile the ASL compiler and the
+ * various ACPICA tools under Linux or other Unix-like system.
+ */
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "amlcode.h"
+#include "acparser.h"
+#include "acdebug.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <unistd.h>
+#include <sys/time.h>
+#include <semaphore.h>
+#include <pthread.h>
+#include <errno.h>
+
+#define _COMPONENT ACPI_OS_SERVICES
+ACPI_MODULE_NAME("osunixxf")
+
+u8 acpi_gbl_debug_timeout = FALSE;
+
+/* Upcalls to acpi_exec */
+
+void
+ae_table_override(struct acpi_table_header *existing_table,
+ struct acpi_table_header **new_table);
+
+typedef void *(*PTHREAD_CALLBACK) (void *);
+
+/* Buffer used by acpi_os_vprintf */
+
+#define ACPI_VPRINTF_BUFFER_SIZE 512
+#define _ASCII_NEWLINE '\n'
+
+/* Terminal support for acpi_exec only */
+
+#ifdef ACPI_EXEC_APP
+#include <termios.h>
+
+struct termios original_term_attributes;
+int term_attributes_were_set = 0;
+
+acpi_status acpi_ut_read_line(char *buffer, u32 buffer_length, u32 *bytes_read);
+
+static void os_enter_line_edit_mode(void);
+
+static void os_exit_line_edit_mode(void);
+
+/******************************************************************************
+ *
+ * FUNCTION: os_enter_line_edit_mode, os_exit_line_edit_mode
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Enter/Exit the raw character input mode for the terminal.
+ *
+ * Interactive line-editing support for the AML debugger. Used with the
+ * common/acgetline module.
+ *
+ * readline() is not used because of non-portability. It is not available
+ * on all systems, and if it is, often the package must be manually installed.
+ *
+ * Therefore, we use the POSIX tcgetattr/tcsetattr and do the minimal line
+ * editing that we need in acpi_os_get_line.
+ *
+ * If the POSIX tcgetattr/tcsetattr interfaces are unavailable, these
+ * calls will also work:
+ * For os_enter_line_edit_mode: system ("stty cbreak -echo")
+ * For os_exit_line_edit_mode: system ("stty cooked echo")
+ *
+ *****************************************************************************/
+
+static void os_enter_line_edit_mode(void)
+{
+ struct termios local_term_attributes;
+
+ /* Get and keep the original attributes */
+
+ if (tcgetattr(STDIN_FILENO, &original_term_attributes)) {
+ fprintf(stderr, "Could not get terminal attributes!\n");
+ return;
+ }
+
+ /* Set the new attributes to enable raw character input */
+
+ memcpy(&local_term_attributes, &original_term_attributes,
+ sizeof(struct termios));
+
+ local_term_attributes.c_lflag &= ~(ICANON | ECHO);
+ local_term_attributes.c_cc[VMIN] = 1;
+ local_term_attributes.c_cc[VTIME] = 0;
+
+ if (tcsetattr(STDIN_FILENO, TCSANOW, &local_term_attributes)) {
+ fprintf(stderr, "Could not set terminal attributes!\n");
+ return;
+ }
+
+ term_attributes_were_set = 1;
+}
+
+static void os_exit_line_edit_mode(void)
+{
+
+ if (!term_attributes_were_set) {
+ return;
+ }
+
+ /* Set terminal attributes back to the original values */
+
+ if (tcsetattr(STDIN_FILENO, TCSANOW, &original_term_attributes)) {
+ fprintf(stderr, "Could not restore terminal attributes!\n");
+ }
+}
+
+#else
+
+/* These functions are not needed for other ACPICA utilities */
+
+#define os_enter_line_edit_mode()
+#define os_exit_line_edit_mode()
+#endif
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_initialize, acpi_os_terminate
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Initialize and terminate this module.
+ *
+ *****************************************************************************/
+
+acpi_status acpi_os_initialize(void)
+{
+ acpi_status status;
+
+ acpi_gbl_output_file = stdout;
+
+ os_enter_line_edit_mode();
+
+ status = acpi_os_create_lock(&acpi_gbl_print_lock);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ return (AE_OK);
+}
+
+acpi_status acpi_os_terminate(void)
+{
+
+ os_exit_line_edit_mode();
+ return (AE_OK);
+}
+
+#ifndef ACPI_USE_NATIVE_RSDP_POINTER
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_get_root_pointer
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: RSDP physical address
+ *
+ * DESCRIPTION: Gets the ACPI root pointer (RSDP)
+ *
+ *****************************************************************************/
+
+acpi_physical_address acpi_os_get_root_pointer(void)
+{
+
+ return (0);
+}
+#endif
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_predefined_override
+ *
+ * PARAMETERS: init_val - Initial value of the predefined object
+ * new_val - The new value for the object
+ *
+ * RETURN: Status, pointer to value. Null pointer returned if not
+ * overriding.
+ *
+ * DESCRIPTION: Allow the OS to override predefined names
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_predefined_override(const struct acpi_predefined_names * init_val,
+ acpi_string * new_val)
+{
+
+ if (!init_val || !new_val) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ *new_val = NULL;
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_table_override
+ *
+ * PARAMETERS: existing_table - Header of current table (probably
+ * firmware)
+ * new_table - Where an entire new table is returned.
+ *
+ * RETURN: Status, pointer to new table. Null pointer returned if no
+ * table is available to override
+ *
+ * DESCRIPTION: Return a different version of a table if one is available
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_table_override(struct acpi_table_header * existing_table,
+ struct acpi_table_header ** new_table)
+{
+
+ if (!existing_table || !new_table) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ *new_table = NULL;
+
+#ifdef ACPI_EXEC_APP
+
+ ae_table_override(existing_table, new_table);
+ return (AE_OK);
+#else
+
+ return (AE_NO_ACPI_TABLES);
+#endif
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_physical_table_override
+ *
+ * PARAMETERS: existing_table - Header of current table (probably firmware)
+ * new_address - Where new table address is returned
+ * (Physical address)
+ * new_table_length - Where new table length is returned
+ *
+ * RETURN: Status, address/length of new table. Null pointer returned
+ * if no table is available to override.
+ *
+ * DESCRIPTION: Returns AE_SUPPORT, function not used in user space.
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_physical_table_override(struct acpi_table_header * existing_table,
+ acpi_physical_address * new_address,
+ u32 *new_table_length)
+{
+
+ return (AE_SUPPORT);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_redirect_output
+ *
+ * PARAMETERS: destination - An open file handle/pointer
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Causes redirect of acpi_os_printf and acpi_os_vprintf
+ *
+ *****************************************************************************/
+
+void acpi_os_redirect_output(void *destination)
+{
+
+ acpi_gbl_output_file = destination;
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_printf
+ *
+ * PARAMETERS: fmt, ... - Standard printf format
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Formatted output. Note: very similar to acpi_os_vprintf
+ * (performance), changes should be tracked in both functions.
+ *
+ *****************************************************************************/
+
+void ACPI_INTERNAL_VAR_XFACE acpi_os_printf(const char *fmt, ...)
+{
+ va_list args;
+ u8 flags;
+
+ flags = acpi_gbl_db_output_flags;
+ if (flags & ACPI_DB_REDIRECTABLE_OUTPUT) {
+
+ /* Output is directable to either a file (if open) or the console */
+
+ if (acpi_gbl_debug_file) {
+
+ /* Output file is open, send the output there */
+
+ va_start(args, fmt);
+ vfprintf(acpi_gbl_debug_file, fmt, args);
+ va_end(args);
+ } else {
+ /* No redirection, send output to console (once only!) */
+
+ flags |= ACPI_DB_CONSOLE_OUTPUT;
+ }
+ }
+
+ if (flags & ACPI_DB_CONSOLE_OUTPUT) {
+ va_start(args, fmt);
+ vfprintf(acpi_gbl_output_file, fmt, args);
+ va_end(args);
+ }
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_vprintf
+ *
+ * PARAMETERS: fmt - Standard printf format
+ * args - Argument list
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Formatted output with argument list pointer. Note: very
+ * similar to acpi_os_printf, changes should be tracked in both
+ * functions.
+ *
+ *****************************************************************************/
+
+void acpi_os_vprintf(const char *fmt, va_list args)
+{
+ u8 flags;
+ char buffer[ACPI_VPRINTF_BUFFER_SIZE];
+
+ /*
+ * We build the output string in a local buffer because we may be
+ * outputting the buffer twice. Using vfprintf is problematic because
+ * some implementations modify the args pointer/structure during
+ * execution. Thus, we use the local buffer for portability.
+ *
+ * Note: Since this module is intended for use by the various ACPICA
+ * utilities/applications, we can safely declare the buffer on the stack.
+ * Also, This function is used for relatively small error messages only.
+ */
+ vsnprintf(buffer, ACPI_VPRINTF_BUFFER_SIZE, fmt, args);
+
+ flags = acpi_gbl_db_output_flags;
+ if (flags & ACPI_DB_REDIRECTABLE_OUTPUT) {
+
+ /* Output is directable to either a file (if open) or the console */
+
+ if (acpi_gbl_debug_file) {
+
+ /* Output file is open, send the output there */
+
+ fputs(buffer, acpi_gbl_debug_file);
+ } else {
+ /* No redirection, send output to console (once only!) */
+
+ flags |= ACPI_DB_CONSOLE_OUTPUT;
+ }
+ }
+
+ if (flags & ACPI_DB_CONSOLE_OUTPUT) {
+ fputs(buffer, acpi_gbl_output_file);
+ }
+}
+
+#ifndef ACPI_EXEC_APP
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_get_line
+ *
+ * PARAMETERS: buffer - Where to return the command line
+ * buffer_length - Maximum length of Buffer
+ * bytes_read - Where the actual byte count is returned
+ *
+ * RETURN: Status and actual bytes read
+ *
+ * DESCRIPTION: Get the next input line from the terminal. NOTE: For the
+ * acpi_exec utility, we use the acgetline module instead to
+ * provide line-editing and history support.
+ *
+ *****************************************************************************/
+
+acpi_status acpi_os_get_line(char *buffer, u32 buffer_length, u32 *bytes_read)
+{
+ int input_char;
+ u32 end_of_line;
+
+ /* Standard acpi_os_get_line for all utilities except acpi_exec */
+
+ for (end_of_line = 0;; end_of_line++) {
+ if (end_of_line >= buffer_length) {
+ return (AE_BUFFER_OVERFLOW);
+ }
+
+ if ((input_char = getchar()) == EOF) {
+ return (AE_ERROR);
+ }
+
+ if (!input_char || input_char == _ASCII_NEWLINE) {
+ break;
+ }
+
+ buffer[end_of_line] = (char)input_char;
+ }
+
+ /* Null terminate the buffer */
+
+ buffer[end_of_line] = 0;
+
+ /* Return the number of bytes in the string */
+
+ if (bytes_read) {
+ *bytes_read = end_of_line;
+ }
+
+ return (AE_OK);
+}
+#endif
+
+#ifndef ACPI_USE_NATIVE_MEMORY_MAPPING
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_map_memory
+ *
+ * PARAMETERS: where - Physical address of memory to be mapped
+ * length - How much memory to map
+ *
+ * RETURN: Pointer to mapped memory. Null on error.
+ *
+ * DESCRIPTION: Map physical memory into caller's address space
+ *
+ *****************************************************************************/
+
+void *acpi_os_map_memory(acpi_physical_address where, acpi_size length)
+{
+
+ return (ACPI_TO_POINTER((acpi_size) where));
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_unmap_memory
+ *
+ * PARAMETERS: where - Logical address of memory to be unmapped
+ * length - How much memory to unmap
+ *
+ * RETURN: None.
+ *
+ * DESCRIPTION: Delete a previously created mapping. Where and Length must
+ * correspond to a previous mapping exactly.
+ *
+ *****************************************************************************/
+
+void acpi_os_unmap_memory(void *where, acpi_size length)
+{
+
+ return;
+}
+#endif
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_allocate
+ *
+ * PARAMETERS: size - Amount to allocate, in bytes
+ *
+ * RETURN: Pointer to the new allocation. Null on error.
+ *
+ * DESCRIPTION: Allocate memory. Algorithm is dependent on the OS.
+ *
+ *****************************************************************************/
+
+void *acpi_os_allocate(acpi_size size)
+{
+ void *mem;
+
+ mem = (void *)malloc((size_t) size);
+ return (mem);
+}
+
+#ifdef USE_NATIVE_ALLOCATE_ZEROED
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_allocate_zeroed
+ *
+ * PARAMETERS: size - Amount to allocate, in bytes
+ *
+ * RETURN: Pointer to the new allocation. Null on error.
+ *
+ * DESCRIPTION: Allocate and zero memory. Algorithm is dependent on the OS.
+ *
+ *****************************************************************************/
+
+void *acpi_os_allocate_zeroed(acpi_size size)
+{
+ void *mem;
+
+ mem = (void *)calloc(1, (size_t) size);
+ return (mem);
+}
+#endif
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_free
+ *
+ * PARAMETERS: mem - Pointer to previously allocated memory
+ *
+ * RETURN: None.
+ *
+ * DESCRIPTION: Free memory allocated via acpi_os_allocate
+ *
+ *****************************************************************************/
+
+void acpi_os_free(void *mem)
+{
+
+ free(mem);
+}
+
+#ifdef ACPI_SINGLE_THREADED
+/******************************************************************************
+ *
+ * FUNCTION: Semaphore stub functions
+ *
+ * DESCRIPTION: Stub functions used for single-thread applications that do
+ * not require semaphore synchronization. Full implementations
+ * of these functions appear after the stubs.
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_create_semaphore(u32 max_units,
+ u32 initial_units, acpi_handle * out_handle)
+{
+ *out_handle = (acpi_handle) 1;
+ return (AE_OK);
+}
+
+acpi_status acpi_os_delete_semaphore(acpi_handle handle)
+{
+ return (AE_OK);
+}
+
+acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout)
+{
+ return (AE_OK);
+}
+
+acpi_status acpi_os_signal_semaphore(acpi_handle handle, u32 units)
+{
+ return (AE_OK);
+}
+
+#else
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_create_semaphore
+ *
+ * PARAMETERS: initial_units - Units to be assigned to the new semaphore
+ * out_handle - Where a handle will be returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create an OS semaphore
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_create_semaphore(u32 max_units,
+ u32 initial_units, acpi_handle * out_handle)
+{
+ sem_t *sem;
+
+ if (!out_handle) {
+ return (AE_BAD_PARAMETER);
+ }
+#ifdef __APPLE__
+ {
+ char *semaphore_name = tmpnam(NULL);
+
+ sem =
+ sem_open(semaphore_name, O_EXCL | O_CREAT, 0755,
+ initial_units);
+ if (!sem) {
+ return (AE_NO_MEMORY);
+ }
+ sem_unlink(semaphore_name); /* This just deletes the name */
+ }
+
+#else
+ sem = acpi_os_allocate(sizeof(sem_t));
+ if (!sem) {
+ return (AE_NO_MEMORY);
+ }
+
+ if (sem_init(sem, 0, initial_units) == -1) {
+ acpi_os_free(sem);
+ return (AE_BAD_PARAMETER);
+ }
+#endif
+
+ *out_handle = (acpi_handle) sem;
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_delete_semaphore
+ *
+ * PARAMETERS: handle - Handle returned by acpi_os_create_semaphore
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Delete an OS semaphore
+ *
+ *****************************************************************************/
+
+acpi_status acpi_os_delete_semaphore(acpi_handle handle)
+{
+ sem_t *sem = (sem_t *) handle;
+
+ if (!sem) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ if (sem_destroy(sem) == -1) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_wait_semaphore
+ *
+ * PARAMETERS: handle - Handle returned by acpi_os_create_semaphore
+ * units - How many units to wait for
+ * msec_timeout - How long to wait (milliseconds)
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Wait for units
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 msec_timeout)
+{
+ acpi_status status = AE_OK;
+ sem_t *sem = (sem_t *) handle;
+#ifndef ACPI_USE_ALTERNATE_TIMEOUT
+ struct timespec time;
+ int ret_val;
+#endif
+
+ if (!sem) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ switch (msec_timeout) {
+ /*
+ * No Wait:
+ * --------
+ * A zero timeout value indicates that we shouldn't wait - just
+ * acquire the semaphore if available otherwise return AE_TIME
+ * (a.k.a. 'would block').
+ */
+ case 0:
+
+ if (sem_trywait(sem) == -1) {
+ status = (AE_TIME);
+ }
+ break;
+
+ /* Wait Indefinitely */
+
+ case ACPI_WAIT_FOREVER:
+
+ if (sem_wait(sem)) {
+ status = (AE_TIME);
+ }
+ break;
+
+ /* Wait with msec_timeout */
+
+ default:
+
+#ifdef ACPI_USE_ALTERNATE_TIMEOUT
+ /*
+ * Alternate timeout mechanism for environments where
+ * sem_timedwait is not available or does not work properly.
+ */
+ while (msec_timeout) {
+ if (sem_trywait(sem) == 0) {
+
+ /* Got the semaphore */
+ return (AE_OK);
+ }
+
+ if (msec_timeout >= 10) {
+ msec_timeout -= 10;
+ usleep(10 * ACPI_USEC_PER_MSEC); /* ten milliseconds */
+ } else {
+ msec_timeout--;
+ usleep(ACPI_USEC_PER_MSEC); /* one millisecond */
+ }
+ }
+ status = (AE_TIME);
+#else
+ /*
+ * The interface to sem_timedwait is an absolute time, so we need to
+ * get the current time, then add in the millisecond Timeout value.
+ */
+ if (clock_gettime(CLOCK_REALTIME, &time) == -1) {
+ perror("clock_gettime");
+ return (AE_TIME);
+ }
+
+ time.tv_sec += (msec_timeout / ACPI_MSEC_PER_SEC);
+ time.tv_nsec +=
+ ((msec_timeout % ACPI_MSEC_PER_SEC) * ACPI_NSEC_PER_MSEC);
+
+ /* Handle nanosecond overflow (field must be less than one second) */
+
+ if (time.tv_nsec >= ACPI_NSEC_PER_SEC) {
+ time.tv_sec += (time.tv_nsec / ACPI_NSEC_PER_SEC);
+ time.tv_nsec = (time.tv_nsec % ACPI_NSEC_PER_SEC);
+ }
+
+ while (((ret_val = sem_timedwait(sem, &time)) == -1)
+ && (errno == EINTR)) {
+ continue;
+ }
+
+ if (ret_val != 0) {
+ if (errno != ETIMEDOUT) {
+ perror("sem_timedwait");
+ }
+ status = (AE_TIME);
+ }
+#endif
+ break;
+ }
+
+ return (status);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_signal_semaphore
+ *
+ * PARAMETERS: handle - Handle returned by acpi_os_create_semaphore
+ * units - Number of units to send
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Send units
+ *
+ *****************************************************************************/
+
+acpi_status acpi_os_signal_semaphore(acpi_handle handle, u32 units)
+{
+ sem_t *sem = (sem_t *) handle;
+
+ if (!sem) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ if (sem_post(sem) == -1) {
+ return (AE_LIMIT);
+ }
+
+ return (AE_OK);
+}
+
+#endif /* ACPI_SINGLE_THREADED */
+
+/******************************************************************************
+ *
+ * FUNCTION: Spinlock interfaces
+ *
+ * DESCRIPTION: Map these interfaces to semaphore interfaces
+ *
+ *****************************************************************************/
+
+acpi_status acpi_os_create_lock(acpi_spinlock * out_handle)
+{
+
+ return (acpi_os_create_semaphore(1, 1, out_handle));
+}
+
+void acpi_os_delete_lock(acpi_spinlock handle)
+{
+ acpi_os_delete_semaphore(handle);
+}
+
+acpi_cpu_flags acpi_os_acquire_lock(acpi_handle handle)
+{
+ acpi_os_wait_semaphore(handle, 1, 0xFFFF);
+ return (0);
+}
+
+void acpi_os_release_lock(acpi_spinlock handle, acpi_cpu_flags flags)
+{
+ acpi_os_signal_semaphore(handle, 1);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_install_interrupt_handler
+ *
+ * PARAMETERS: interrupt_number - Level handler should respond to.
+ * isr - Address of the ACPI interrupt handler
+ * except_ptr - Where status is returned
+ *
+ * RETURN: Handle to the newly installed handler.
+ *
+ * DESCRIPTION: Install an interrupt handler. Used to install the ACPI
+ * OS-independent handler.
+ *
+ *****************************************************************************/
+
+u32
+acpi_os_install_interrupt_handler(u32 interrupt_number,
+ acpi_osd_handler service_routine,
+ void *context)
+{
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_remove_interrupt_handler
+ *
+ * PARAMETERS: handle - Returned when handler was installed
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Uninstalls an interrupt handler.
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_remove_interrupt_handler(u32 interrupt_number,
+ acpi_osd_handler service_routine)
+{
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_stall
+ *
+ * PARAMETERS: microseconds - Time to sleep
+ *
+ * RETURN: Blocks until sleep is completed.
+ *
+ * DESCRIPTION: Sleep at microsecond granularity
+ *
+ *****************************************************************************/
+
+void acpi_os_stall(u32 microseconds)
+{
+
+ if (microseconds) {
+ usleep(microseconds);
+ }
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_sleep
+ *
+ * PARAMETERS: milliseconds - Time to sleep
+ *
+ * RETURN: Blocks until sleep is completed.
+ *
+ * DESCRIPTION: Sleep at millisecond granularity
+ *
+ *****************************************************************************/
+
+void acpi_os_sleep(u64 milliseconds)
+{
+
+ /* Sleep for whole seconds */
+
+ sleep(milliseconds / ACPI_MSEC_PER_SEC);
+
+ /*
+ * Sleep for remaining microseconds.
+ * Arg to usleep() is in usecs and must be less than 1,000,000 (1 second).
+ */
+ usleep((milliseconds % ACPI_MSEC_PER_SEC) * ACPI_USEC_PER_MSEC);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_get_timer
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Current time in 100 nanosecond units
+ *
+ * DESCRIPTION: Get the current system time
+ *
+ *****************************************************************************/
+
+u64 acpi_os_get_timer(void)
+{
+ struct timeval time;
+
+ /* This timer has sufficient resolution for user-space application code */
+
+ gettimeofday(&time, NULL);
+
+ /* (Seconds * 10^7 = 100ns(10^-7)) + (Microseconds(10^-6) * 10^1 = 100ns) */
+
+ return (((u64)time.tv_sec * ACPI_100NSEC_PER_SEC) +
+ ((u64)time.tv_usec * ACPI_100NSEC_PER_USEC));
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_read_pci_configuration
+ *
+ * PARAMETERS: pci_id - Seg/Bus/Dev
+ * pci_register - Device Register
+ * value - Buffer where value is placed
+ * width - Number of bits
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Read data from PCI configuration space
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_read_pci_configuration(struct acpi_pci_id *pci_id,
+ u32 pci_register, u64 *value, u32 width)
+{
+
+ *value = 0;
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_write_pci_configuration
+ *
+ * PARAMETERS: pci_id - Seg/Bus/Dev
+ * pci_register - Device Register
+ * value - Value to be written
+ * width - Number of bits
+ *
+ * RETURN: Status.
+ *
+ * DESCRIPTION: Write data to PCI configuration space
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id,
+ u32 pci_register, u64 value, u32 width)
+{
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_read_port
+ *
+ * PARAMETERS: address - Address of I/O port/register to read
+ * value - Where value is placed
+ * width - Number of bits
+ *
+ * RETURN: Value read from port
+ *
+ * DESCRIPTION: Read data from an I/O port or register
+ *
+ *****************************************************************************/
+
+acpi_status acpi_os_read_port(acpi_io_address address, u32 *value, u32 width)
+{
+
+ switch (width) {
+ case 8:
+
+ *value = 0xFF;
+ break;
+
+ case 16:
+
+ *value = 0xFFFF;
+ break;
+
+ case 32:
+
+ *value = 0xFFFFFFFF;
+ break;
+
+ default:
+
+ return (AE_BAD_PARAMETER);
+ }
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_write_port
+ *
+ * PARAMETERS: address - Address of I/O port/register to write
+ * value - Value to write
+ * width - Number of bits
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Write data to an I/O port or register
+ *
+ *****************************************************************************/
+
+acpi_status acpi_os_write_port(acpi_io_address address, u32 value, u32 width)
+{
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_read_memory
+ *
+ * PARAMETERS: address - Physical Memory Address to read
+ * value - Where value is placed
+ * width - Number of bits (8,16,32, or 64)
+ *
+ * RETURN: Value read from physical memory address. Always returned
+ * as a 64-bit integer, regardless of the read width.
+ *
+ * DESCRIPTION: Read data from a physical memory address
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_read_memory(acpi_physical_address address, u64 *value, u32 width)
+{
+
+ switch (width) {
+ case 8:
+ case 16:
+ case 32:
+ case 64:
+
+ *value = 0;
+ break;
+
+ default:
+
+ return (AE_BAD_PARAMETER);
+ }
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_write_memory
+ *
+ * PARAMETERS: address - Physical Memory Address to write
+ * value - Value to write
+ * width - Number of bits (8,16,32, or 64)
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Write data to a physical memory address
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_write_memory(acpi_physical_address address, u64 value, u32 width)
+{
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_readable
+ *
+ * PARAMETERS: pointer - Area to be verified
+ * length - Size of area
+ *
+ * RETURN: TRUE if readable for entire length
+ *
+ * DESCRIPTION: Verify that a pointer is valid for reading
+ *
+ *****************************************************************************/
+
+u8 acpi_os_readable(void *pointer, acpi_size length)
+{
+
+ return (TRUE);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_writable
+ *
+ * PARAMETERS: pointer - Area to be verified
+ * length - Size of area
+ *
+ * RETURN: TRUE if writable for entire length
+ *
+ * DESCRIPTION: Verify that a pointer is valid for writing
+ *
+ *****************************************************************************/
+
+u8 acpi_os_writable(void *pointer, acpi_size length)
+{
+
+ return (TRUE);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_signal
+ *
+ * PARAMETERS: function - ACPI A signal function code
+ * info - Pointer to function-dependent structure
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Miscellaneous functions. Example implementation only.
+ *
+ *****************************************************************************/
+
+acpi_status acpi_os_signal(u32 function, void *info)
+{
+
+ switch (function) {
+ case ACPI_SIGNAL_FATAL:
+
+ break;
+
+ case ACPI_SIGNAL_BREAKPOINT:
+
+ break;
+
+ default:
+
+ break;
+ }
+
+ return (AE_OK);
+}
+
+/* Optional multi-thread support */
+
+#ifndef ACPI_SINGLE_THREADED
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_get_thread_id
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Id of the running thread
+ *
+ * DESCRIPTION: Get the ID of the current (running) thread
+ *
+ *****************************************************************************/
+
+acpi_thread_id acpi_os_get_thread_id(void)
+{
+ pthread_t thread;
+
+ thread = pthread_self();
+ return (ACPI_CAST_PTHREAD_T(thread));
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_execute
+ *
+ * PARAMETERS: type - Type of execution
+ * function - Address of the function to execute
+ * context - Passed as a parameter to the function
+ *
+ * RETURN: Status.
+ *
+ * DESCRIPTION: Execute a new thread
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_os_execute(acpi_execute_type type,
+ acpi_osd_exec_callback function, void *context)
+{
+ pthread_t thread;
+ int ret;
+
+ ret =
+ pthread_create(&thread, NULL, (PTHREAD_CALLBACK) function, context);
+ if (ret) {
+ acpi_os_printf("Create thread failed");
+ }
+ return (0);
+}
+
+#else /* ACPI_SINGLE_THREADED */
+acpi_thread_id acpi_os_get_thread_id(void)
+{
+ return (1);
+}
+
+acpi_status
+acpi_os_execute(acpi_execute_type type,
+ acpi_osd_exec_callback function, void *context)
+{
+
+ function(context);
+
+ return (AE_OK);
+}
+
+#endif /* ACPI_SINGLE_THREADED */
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_os_wait_events_complete
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Wait for all asynchronous events to complete. This
+ * implementation does nothing.
+ *
+ *****************************************************************************/
+
+void acpi_os_wait_events_complete(void)
+{
+ return;
+}
diff --git a/tools/power/acpi/tools/acpidump/acpidump.h b/tools/power/acpi/tools/acpidump/acpidump.h
index 46f519597fe5..a2d37d610639 100644
--- a/tools/power/acpi/tools/acpidump/acpidump.h
+++ b/tools/power/acpi/tools/acpidump/acpidump.h
@@ -47,7 +47,6 @@
#ifdef _DECLARE_GLOBALS
#define EXTERN
#define INIT_GLOBAL(a,b) a=b
-#define DEFINE_ACPI_GLOBALS 1
#else
#define EXTERN extern
#define INIT_GLOBAL(a,b) a
@@ -69,7 +68,7 @@ EXTERN u8 INIT_GLOBAL(gbl_verbose_mode, FALSE);
EXTERN u8 INIT_GLOBAL(gbl_binary_mode, FALSE);
EXTERN u8 INIT_GLOBAL(gbl_dump_customized_tables, FALSE);
EXTERN u8 INIT_GLOBAL(gbl_do_not_dump_xsdt, FALSE);
-EXTERN FILE INIT_GLOBAL(*gbl_output_file, NULL);
+EXTERN ACPI_FILE INIT_GLOBAL(gbl_output_file, NULL);
EXTERN char INIT_GLOBAL(*gbl_output_filename, NULL);
EXTERN u64 INIT_GLOBAL(gbl_rsdp_base, 0);
diff --git a/tools/power/acpi/tools/acpidump/apdump.c b/tools/power/acpi/tools/acpidump/apdump.c
index 3cac12378366..53cee781e24e 100644
--- a/tools/power/acpi/tools/acpidump/apdump.c
+++ b/tools/power/acpi/tools/acpidump/apdump.c
@@ -69,17 +69,16 @@ u8 ap_is_valid_header(struct acpi_table_header *table)
/* Make sure signature is all ASCII and a valid ACPI name */
if (!acpi_ut_valid_acpi_name(table->signature)) {
- fprintf(stderr,
- "Table signature (0x%8.8X) is invalid\n",
- *(u32 *)table->signature);
+ acpi_log_error("Table signature (0x%8.8X) is invalid\n",
+ *(u32 *)table->signature);
return (FALSE);
}
/* Check for minimum table length */
if (table->length < sizeof(struct acpi_table_header)) {
- fprintf(stderr, "Table length (0x%8.8X) is invalid\n",
- table->length);
+ acpi_log_error("Table length (0x%8.8X) is invalid\n",
+ table->length);
return (FALSE);
}
}
@@ -116,8 +115,8 @@ u8 ap_is_valid_checksum(struct acpi_table_header *table)
}
if (ACPI_FAILURE(status)) {
- fprintf(stderr, "%4.4s: Warning: wrong checksum in table\n",
- table->signature);
+ acpi_log_error("%4.4s: Warning: wrong checksum in table\n",
+ table->signature);
}
return (AE_OK);
@@ -196,12 +195,13 @@ ap_dump_table_buffer(struct acpi_table_header *table,
* Note: simplest to just always emit a 64-bit address. acpi_xtract
* utility can handle this.
*/
- printf("%4.4s @ 0x%8.8X%8.8X\n", table->signature,
- ACPI_FORMAT_UINT64(address));
+ acpi_ut_file_printf(gbl_output_file, "%4.4s @ 0x%8.8X%8.8X\n",
+ table->signature, ACPI_FORMAT_UINT64(address));
- acpi_ut_dump_buffer(ACPI_CAST_PTR(u8, table), table_length,
- DB_BYTE_DISPLAY, 0);
- printf("\n");
+ acpi_ut_dump_buffer_to_file(gbl_output_file,
+ ACPI_CAST_PTR(u8, table), table_length,
+ DB_BYTE_DISPLAY, 0);
+ acpi_ut_file_printf(gbl_output_file, "\n");
return (0);
}
@@ -239,20 +239,20 @@ int ap_dump_all_tables(void)
if (status == AE_LIMIT) {
return (0);
} else if (i == 0) {
- fprintf(stderr,
- "Could not get ACPI tables, %s\n",
- acpi_format_exception(status));
+ acpi_log_error
+ ("Could not get ACPI tables, %s\n",
+ acpi_format_exception(status));
return (-1);
} else {
- fprintf(stderr,
- "Could not get ACPI table at index %u, %s\n",
- i, acpi_format_exception(status));
+ acpi_log_error
+ ("Could not get ACPI table at index %u, %s\n",
+ i, acpi_format_exception(status));
continue;
}
}
table_status = ap_dump_table_buffer(table, instance, address);
- free(table);
+ ACPI_FREE(table);
if (table_status) {
break;
@@ -288,22 +288,22 @@ int ap_dump_table_by_address(char *ascii_address)
status = acpi_ut_strtoul64(ascii_address, 0, &long_address);
if (ACPI_FAILURE(status)) {
- fprintf(stderr, "%s: Could not convert to a physical address\n",
- ascii_address);
+ acpi_log_error("%s: Could not convert to a physical address\n",
+ ascii_address);
return (-1);
}
address = (acpi_physical_address) long_address;
status = acpi_os_get_table_by_address(address, &table);
if (ACPI_FAILURE(status)) {
- fprintf(stderr, "Could not get table at 0x%8.8X%8.8X, %s\n",
- ACPI_FORMAT_UINT64(address),
- acpi_format_exception(status));
+ acpi_log_error("Could not get table at 0x%8.8X%8.8X, %s\n",
+ ACPI_FORMAT_UINT64(address),
+ acpi_format_exception(status));
return (-1);
}
table_status = ap_dump_table_buffer(table, 0, address);
- free(table);
+ ACPI_FREE(table);
return (table_status);
}
@@ -329,24 +329,24 @@ int ap_dump_table_by_name(char *signature)
acpi_status status;
int table_status;
- if (strlen(signature) != ACPI_NAME_SIZE) {
- fprintf(stderr,
- "Invalid table signature [%s]: must be exactly 4 characters\n",
- signature);
+ if (ACPI_STRLEN(signature) != ACPI_NAME_SIZE) {
+ acpi_log_error
+ ("Invalid table signature [%s]: must be exactly 4 characters\n",
+ signature);
return (-1);
}
/* Table signatures are expected to be uppercase */
- strcpy(local_signature, signature);
+ ACPI_STRCPY(local_signature, signature);
acpi_ut_strupr(local_signature);
/* To be friendly, handle tables whose signatures do not match the name */
if (ACPI_COMPARE_NAME(local_signature, "FADT")) {
- strcpy(local_signature, ACPI_SIG_FADT);
+ ACPI_STRCPY(local_signature, ACPI_SIG_FADT);
} else if (ACPI_COMPARE_NAME(local_signature, "MADT")) {
- strcpy(local_signature, ACPI_SIG_MADT);
+ ACPI_STRCPY(local_signature, ACPI_SIG_MADT);
}
/* Dump all instances of this signature (to handle multiple SSDTs) */
@@ -362,14 +362,14 @@ int ap_dump_table_by_name(char *signature)
return (0);
}
- fprintf(stderr,
- "Could not get ACPI table with signature [%s], %s\n",
- local_signature, acpi_format_exception(status));
+ acpi_log_error
+ ("Could not get ACPI table with signature [%s], %s\n",
+ local_signature, acpi_format_exception(status));
return (-1);
}
table_status = ap_dump_table_buffer(table, instance, address);
- free(table);
+ ACPI_FREE(table);
if (table_status) {
break;
@@ -409,43 +409,21 @@ int ap_dump_table_from_file(char *pathname)
/* File must be at least as long as the table length */
if (table->length > file_size) {
- fprintf(stderr,
- "Table length (0x%X) is too large for input file (0x%X) %s\n",
- table->length, file_size, pathname);
+ acpi_log_error
+ ("Table length (0x%X) is too large for input file (0x%X) %s\n",
+ table->length, file_size, pathname);
goto exit;
}
if (gbl_verbose_mode) {
- fprintf(stderr,
- "Input file: %s contains table [%4.4s], 0x%X (%u) bytes\n",
- pathname, table->signature, file_size, file_size);
+ acpi_log_error
+ ("Input file: %s contains table [%4.4s], 0x%X (%u) bytes\n",
+ pathname, table->signature, file_size, file_size);
}
table_status = ap_dump_table_buffer(table, 0, 0);
exit:
- free(table);
+ ACPI_FREE(table);
return (table_status);
}
-
-/******************************************************************************
- *
- * FUNCTION: acpi_os* print functions
- *
- * DESCRIPTION: Used for linkage with ACPICA modules
- *
- ******************************************************************************/
-
-void ACPI_INTERNAL_VAR_XFACE acpi_os_printf(const char *fmt, ...)
-{
- va_list args;
-
- va_start(args, fmt);
- vfprintf(stdout, fmt, args);
- va_end(args);
-}
-
-void acpi_os_vprintf(const char *fmt, va_list args)
-{
- vfprintf(stdout, fmt, args);
-}
diff --git a/tools/power/acpi/tools/acpidump/apfiles.c b/tools/power/acpi/tools/acpidump/apfiles.c
index 4488accc010b..d470046a6d81 100644
--- a/tools/power/acpi/tools/acpidump/apfiles.c
+++ b/tools/power/acpi/tools/acpidump/apfiles.c
@@ -44,6 +44,27 @@
#include "acpidump.h"
#include "acapps.h"
+/* Local prototypes */
+
+static int ap_is_existing_file(char *pathname);
+
+static int ap_is_existing_file(char *pathname)
+{
+#ifndef _GNU_EFI
+ struct stat stat_info;
+
+ if (!stat(pathname, &stat_info)) {
+ acpi_log_error("Target path already exists, overwrite? [y|n] ");
+
+ if (getchar() != 'y') {
+ return (-1);
+ }
+ }
+#endif
+
+ return 0;
+}
+
/******************************************************************************
*
* FUNCTION: ap_open_output_file
@@ -59,25 +80,19 @@
int ap_open_output_file(char *pathname)
{
- struct stat stat_info;
- FILE *file;
+ ACPI_FILE file;
/* If file exists, prompt for overwrite */
- if (!stat(pathname, &stat_info)) {
- fprintf(stderr,
- "Target path already exists, overwrite? [y|n] ");
-
- if (getchar() != 'y') {
- return (-1);
- }
+ if (ap_is_existing_file(pathname) != 0) {
+ return (-1);
}
/* Point stdout to the file */
- file = freopen(pathname, "w", stdout);
+ file = acpi_os_open_file(pathname, ACPI_FILE_WRITING);
if (!file) {
- perror("Could not open output file");
+ acpi_log_error("Could not open output file: %s\n", pathname);
return (-1);
}
@@ -106,7 +121,7 @@ int ap_write_to_binary_file(struct acpi_table_header *table, u32 instance)
{
char filename[ACPI_NAME_SIZE + 16];
char instance_str[16];
- FILE *file;
+ ACPI_FILE file;
size_t actual;
u32 table_length;
@@ -130,35 +145,37 @@ int ap_write_to_binary_file(struct acpi_table_header *table, u32 instance)
/* Handle multiple SSDts - create different filenames for each */
if (instance > 0) {
- sprintf(instance_str, "%u", instance);
- strcat(filename, instance_str);
+ acpi_ut_snprintf(instance_str, sizeof(instance_str), "%u",
+ instance);
+ ACPI_STRCAT(filename, instance_str);
}
- strcat(filename, ACPI_TABLE_FILE_SUFFIX);
+ ACPI_STRCAT(filename, ACPI_TABLE_FILE_SUFFIX);
if (gbl_verbose_mode) {
- fprintf(stderr,
- "Writing [%4.4s] to binary file: %s 0x%X (%u) bytes\n",
- table->signature, filename, table->length,
- table->length);
+ acpi_log_error
+ ("Writing [%4.4s] to binary file: %s 0x%X (%u) bytes\n",
+ table->signature, filename, table->length, table->length);
}
/* Open the file and dump the entire table in binary mode */
- file = fopen(filename, "wb");
+ file = acpi_os_open_file(filename,
+ ACPI_FILE_WRITING | ACPI_FILE_BINARY);
if (!file) {
- perror("Could not open output file");
+ acpi_log_error("Could not open output file: %s\n", filename);
return (-1);
}
- actual = fwrite(table, 1, table_length, file);
+ actual = acpi_os_write_file(file, table, 1, table_length);
if (actual != table_length) {
- perror("Error writing binary output file");
- fclose(file);
+ acpi_log_error("Error writing binary output file: %s\n",
+ filename);
+ acpi_os_close_file(file);
return (-1);
}
- fclose(file);
+ acpi_os_close_file(file);
return (0);
}
@@ -179,15 +196,16 @@ struct acpi_table_header *ap_get_table_from_file(char *pathname,
u32 *out_file_size)
{
struct acpi_table_header *buffer = NULL;
- FILE *file;
+ ACPI_FILE file;
u32 file_size;
size_t actual;
/* Must use binary mode */
- file = fopen(pathname, "rb");
+ file =
+ acpi_os_open_file(pathname, ACPI_FILE_READING | ACPI_FILE_BINARY);
if (!file) {
- perror("Could not open input file");
+ acpi_log_error("Could not open input file: %s\n", pathname);
return (NULL);
}
@@ -195,27 +213,25 @@ struct acpi_table_header *ap_get_table_from_file(char *pathname,
file_size = cm_get_file_size(file);
if (file_size == ACPI_UINT32_MAX) {
- fprintf(stderr,
- "Could not get input file size: %s\n", pathname);
+ acpi_log_error("Could not get input file size: %s\n", pathname);
goto cleanup;
}
/* Allocate a buffer for the entire file */
- buffer = calloc(1, file_size);
+ buffer = ACPI_ALLOCATE_ZEROED(file_size);
if (!buffer) {
- fprintf(stderr,
- "Could not allocate file buffer of size: %u\n",
- file_size);
+ acpi_log_error("Could not allocate file buffer of size: %u\n",
+ file_size);
goto cleanup;
}
/* Read the entire file */
- actual = fread(buffer, 1, file_size, file);
+ actual = acpi_os_read_file(file, buffer, 1, file_size);
if (actual != file_size) {
- fprintf(stderr, "Could not read input file: %s\n", pathname);
- free(buffer);
+ acpi_log_error("Could not read input file: %s\n", pathname);
+ ACPI_FREE(buffer);
buffer = NULL;
goto cleanup;
}
@@ -223,6 +239,6 @@ struct acpi_table_header *ap_get_table_from_file(char *pathname,
*out_file_size = file_size;
cleanup:
- fclose(file);
+ acpi_os_close_file(file);
return (buffer);
}
diff --git a/tools/power/acpi/tools/acpidump/apmain.c b/tools/power/acpi/tools/acpidump/apmain.c
index 51e8d638db18..853b4da22c3e 100644
--- a/tools/power/acpi/tools/acpidump/apmain.c
+++ b/tools/power/acpi/tools/acpidump/apmain.c
@@ -72,7 +72,7 @@ static void ap_display_usage(void);
static int ap_do_options(int argc, char **argv);
-static void ap_insert_action(char *argument, u32 to_be_done);
+static int ap_insert_action(char *argument, u32 to_be_done);
/* Table for deferred actions from command line options */
@@ -104,7 +104,7 @@ static void ap_display_usage(void)
ACPI_OPTION("-v", "Display version information");
ACPI_OPTION("-z", "Verbose mode");
- printf("\nTable Options:\n");
+ ACPI_USAGE_TEXT("\nTable Options:\n");
ACPI_OPTION("-a <Address>", "Get table via a physical address");
ACPI_OPTION("-f <BinaryFile>", "Get table via a binary file");
@@ -112,9 +112,9 @@ static void ap_display_usage(void)
ACPI_OPTION("-x", "Do not use but dump XSDT");
ACPI_OPTION("-x -x", "Do not use or dump XSDT");
- printf("\n"
- "Invocation without parameters dumps all available tables\n"
- "Multiple mixed instances of -a, -f, and -n are supported\n\n");
+ ACPI_USAGE_TEXT("\n"
+ "Invocation without parameters dumps all available tables\n"
+ "Multiple mixed instances of -a, -f, and -n are supported\n\n");
}
/******************************************************************************
@@ -124,13 +124,13 @@ static void ap_display_usage(void)
* PARAMETERS: argument - Pointer to the argument for this action
* to_be_done - What to do to process this action
*
- * RETURN: None. Exits program if action table becomes full.
+ * RETURN: Status
*
* DESCRIPTION: Add an action item to the action table
*
******************************************************************************/
-static void ap_insert_action(char *argument, u32 to_be_done)
+static int ap_insert_action(char *argument, u32 to_be_done)
{
/* Insert action and check for table overflow */
@@ -140,10 +140,12 @@ static void ap_insert_action(char *argument, u32 to_be_done)
current_action++;
if (current_action > AP_MAX_ACTIONS) {
- fprintf(stderr, "Too many table options (max %u)\n",
- AP_MAX_ACTIONS);
- exit(-1);
+ acpi_log_error("Too many table options (max %u)\n",
+ AP_MAX_ACTIONS);
+ return (-1);
}
+
+ return (0);
}
/******************************************************************************
@@ -166,7 +168,8 @@ static int ap_do_options(int argc, char **argv)
/* Command line options */
- while ((j = acpi_getopt(argc, argv, AP_SUPPORTED_OPTIONS)) != EOF)
+ while ((j =
+ acpi_getopt(argc, argv, AP_SUPPORTED_OPTIONS)) != ACPI_OPT_END)
switch (j) {
/*
* Global options
@@ -185,12 +188,12 @@ static int ap_do_options(int argc, char **argv)
case '?':
ap_display_usage();
- exit(0);
+ return (1);
case 'o': /* Redirect output to a single file */
if (ap_open_output_file(acpi_gbl_optarg)) {
- exit(-1);
+ return (-1);
}
continue;
@@ -200,10 +203,10 @@ static int ap_do_options(int argc, char **argv)
acpi_ut_strtoul64(acpi_gbl_optarg, 0,
&gbl_rsdp_base);
if (ACPI_FAILURE(status)) {
- fprintf(stderr,
- "%s: Could not convert to a physical address\n",
- acpi_gbl_optarg);
- exit(-1);
+ acpi_log_error
+ ("%s: Could not convert to a physical address\n",
+ acpi_gbl_optarg);
+ return (-1);
}
continue;
@@ -223,13 +226,13 @@ static int ap_do_options(int argc, char **argv)
case 'v': /* Revision/version */
- printf(ACPI_COMMON_SIGNON(AP_UTILITY_NAME));
- exit(0);
+ acpi_os_printf(ACPI_COMMON_SIGNON(AP_UTILITY_NAME));
+ return (1);
case 'z': /* Verbose mode */
gbl_verbose_mode = TRUE;
- fprintf(stderr, ACPI_COMMON_SIGNON(AP_UTILITY_NAME));
+ acpi_log_error(ACPI_COMMON_SIGNON(AP_UTILITY_NAME));
continue;
/*
@@ -237,32 +240,40 @@ static int ap_do_options(int argc, char **argv)
*/
case 'a': /* Get table by physical address */
- ap_insert_action(acpi_gbl_optarg,
- AP_DUMP_TABLE_BY_ADDRESS);
+ if (ap_insert_action
+ (acpi_gbl_optarg, AP_DUMP_TABLE_BY_ADDRESS)) {
+ return (-1);
+ }
break;
case 'f': /* Get table from a file */
- ap_insert_action(acpi_gbl_optarg,
- AP_DUMP_TABLE_BY_FILE);
+ if (ap_insert_action
+ (acpi_gbl_optarg, AP_DUMP_TABLE_BY_FILE)) {
+ return (-1);
+ }
break;
case 'n': /* Get table by input name (signature) */
- ap_insert_action(acpi_gbl_optarg,
- AP_DUMP_TABLE_BY_NAME);
+ if (ap_insert_action
+ (acpi_gbl_optarg, AP_DUMP_TABLE_BY_NAME)) {
+ return (-1);
+ }
break;
default:
ap_display_usage();
- exit(-1);
+ return (-1);
}
/* If there are no actions, this means "get/dump all tables" */
if (current_action == 0) {
- ap_insert_action(NULL, AP_DUMP_ALL_TABLES);
+ if (ap_insert_action(NULL, AP_DUMP_ALL_TABLES)) {
+ return (-1);
+ }
}
return (0);
@@ -280,7 +291,11 @@ static int ap_do_options(int argc, char **argv)
*
******************************************************************************/
+#ifndef _GNU_EFI
int ACPI_SYSTEM_XFACE main(int argc, char *argv[])
+#else
+int ACPI_SYSTEM_XFACE acpi_main(int argc, char *argv[])
+#endif
{
int status = 0;
struct ap_dump_action *action;
@@ -288,11 +303,17 @@ int ACPI_SYSTEM_XFACE main(int argc, char *argv[])
u32 i;
ACPI_DEBUG_INITIALIZE(); /* For debug version only */
+ acpi_os_initialize();
+ gbl_output_file = ACPI_FILE_OUT;
/* Process command line options */
- if (ap_do_options(argc, argv)) {
- return (-1);
+ status = ap_do_options(argc, argv);
+ if (status > 0) {
+ return (0);
+ }
+ if (status < 0) {
+ return (status);
}
/* Get/dump ACPI table(s) as requested */
@@ -322,9 +343,8 @@ int ACPI_SYSTEM_XFACE main(int argc, char *argv[])
default:
- fprintf(stderr,
- "Internal error, invalid action: 0x%X\n",
- action->to_be_done);
+ acpi_log_error("Internal error, invalid action: 0x%X\n",
+ action->to_be_done);
return (-1);
}
@@ -333,18 +353,18 @@ int ACPI_SYSTEM_XFACE main(int argc, char *argv[])
}
}
- if (gbl_output_file) {
+ if (gbl_output_filename) {
if (gbl_verbose_mode) {
/* Summary for the output file */
file_size = cm_get_file_size(gbl_output_file);
- fprintf(stderr,
- "Output file %s contains 0x%X (%u) bytes\n\n",
- gbl_output_filename, file_size, file_size);
+ acpi_log_error
+ ("Output file %s contains 0x%X (%u) bytes\n\n",
+ gbl_output_filename, file_size, file_size);
}
- fclose(gbl_output_file);
+ acpi_os_close_file(gbl_output_file);
}
return (status);
diff --git a/tools/power/cpupower/bench/parse.c b/tools/power/cpupower/bench/parse.c
index 543bba14ae2c..f503fb53824e 100644
--- a/tools/power/cpupower/bench/parse.c
+++ b/tools/power/cpupower/bench/parse.c
@@ -158,14 +158,15 @@ struct config *prepare_default_config()
int prepare_config(const char *path, struct config *config)
{
size_t len = 0;
- char *opt, *val, *line = NULL;
- FILE *configfile = fopen(path, "r");
+ char opt[16], val[32], *line = NULL;
+ FILE *configfile;
if (config == NULL) {
fprintf(stderr, "error: config is NULL\n");
return 1;
}
+ configfile = fopen(path, "r");
if (configfile == NULL) {
perror("fopen");
fprintf(stderr, "error: unable to read configfile\n");
@@ -174,52 +175,54 @@ int prepare_config(const char *path, struct config *config)
}
while (getline(&line, &len, configfile) != -1) {
- if (line[0] == '#' || line[0] == ' ')
+ if (line[0] == '#' || line[0] == ' ' || line[0] == '\n')
continue;
- sscanf(line, "%as = %as", &opt, &val);
+ if (sscanf(line, "%14s = %30s", opt, val) < 2)
+ continue;
dprintf("parsing: %s -> %s\n", opt, val);
- if (strncmp("sleep", opt, strlen(opt)) == 0)
+ if (strcmp("sleep", opt) == 0)
sscanf(val, "%li", &config->sleep);
- else if (strncmp("load", opt, strlen(opt)) == 0)
+ else if (strcmp("load", opt) == 0)
sscanf(val, "%li", &config->load);
- else if (strncmp("load_step", opt, strlen(opt)) == 0)
+ else if (strcmp("load_step", opt) == 0)
sscanf(val, "%li", &config->load_step);
- else if (strncmp("sleep_step", opt, strlen(opt)) == 0)
+ else if (strcmp("sleep_step", opt) == 0)
sscanf(val, "%li", &config->sleep_step);
- else if (strncmp("cycles", opt, strlen(opt)) == 0)
+ else if (strcmp("cycles", opt) == 0)
sscanf(val, "%u", &config->cycles);
- else if (strncmp("rounds", opt, strlen(opt)) == 0)
+ else if (strcmp("rounds", opt) == 0)
sscanf(val, "%u", &config->rounds);
- else if (strncmp("verbose", opt, strlen(opt)) == 0)
+ else if (strcmp("verbose", opt) == 0)
sscanf(val, "%u", &config->verbose);
- else if (strncmp("output", opt, strlen(opt)) == 0)
+ else if (strcmp("output", opt) == 0)
config->output = prepare_output(val);
- else if (strncmp("cpu", opt, strlen(opt)) == 0)
+ else if (strcmp("cpu", opt) == 0)
sscanf(val, "%u", &config->cpu);
- else if (strncmp("governor", opt, 14) == 0)
- strncpy(config->governor, val, 14);
+ else if (strcmp("governor", opt) == 0) {
+ strncpy(config->governor, val,
+ sizeof(config->governor));
+ config->governor[sizeof(config->governor) - 1] = '\0';
+ }
- else if (strncmp("priority", opt, strlen(opt)) == 0) {
+ else if (strcmp("priority", opt) == 0) {
if (string_to_prio(val) != SCHED_ERR)
config->prio = string_to_prio(val);
}
}
free(line);
- free(opt);
- free(val);
return 0;
}
diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c
index a416de80c55e..f656e585ed45 100644
--- a/tools/power/cpupower/utils/cpufreq-set.c
+++ b/tools/power/cpupower/utils/cpufreq-set.c
@@ -320,12 +320,11 @@ int cmd_freq_set(int argc, char **argv)
printf(_("Setting cpu: %d\n"), cpu);
ret = do_one_cpu(cpu, &new_pol, freq, policychange);
- if (ret)
- break;
+ if (ret) {
+ print_error();
+ return ret;
+ }
}
- if (ret)
- print_error();
-
- return ret;
+ return 0;
}
diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c
index 851c7a16ca49..09afe5d87f2b 100644
--- a/tools/power/cpupower/utils/helpers/sysfs.c
+++ b/tools/power/cpupower/utils/helpers/sysfs.c
@@ -81,7 +81,7 @@ int sysfs_is_cpu_online(unsigned int cpu)
close(fd);
value = strtoull(linebuf, &endp, 0);
- if (value > 1 || value < 0)
+ if (value > 1)
return -EINVAL;
return value;
diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
index 5650ab5a2c20..90a8c4f071e7 100644
--- a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
+++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
@@ -237,7 +237,7 @@ static int init_maxfreq_mode(void)
unsigned long long hwcr;
unsigned long min;
- if (!cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC)
+ if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC))
goto use_sysfs;
if (cpupower_cpu_info.vendor == X86_VENDOR_AMD) {
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 00:43:09 +0000